2015-04-02T20:17:14.619Z,1428005834.619 [Supervisor](DEBUG): Initializing supervisor.
2015-04-02T20:17:14.626Z,1428005834.626 [SyncHandler](DEBUG): Created PCaller Thread at 4034C4E0
2015-04-02T20:17:14.626Z,1428005834.626 [SyncHandler](INFO): Protected caller Thread ID is 768
2015-04-02T20:17:14.627Z,1428005834.627 [ComponentRegistry](DEBUG): Component "controlThread" handled in its own thread.
2015-04-02T20:17:14.630Z,1428005834.630 [controlThread ThreadHandler](DEBUG): Created PCaller Thread at 4037C4E0
2015-04-02T20:17:14.630Z,1428005834.630 [controlThread ThreadHandler](INFO): Protected caller Thread ID is 769
2015-04-02T20:17:14.633Z,1428005834.633 [ComponentRegistry](DEBUG): SyncComponent "CycleStarter" handled in the control thread.
2015-04-02T20:17:14.645Z,1428005834.645 [ComponentRegistry](DEBUG): Component "CommandLine" handled in its own thread.
2015-04-02T20:17:14.650Z,1428005834.650 [CommandLine ThreadHandler](DEBUG): Created PCaller Thread at 403AC4E0
2015-04-02T20:17:14.650Z,1428005834.650 [CommandLine ThreadHandler](INFO): Protected caller Thread ID is 770
2015-04-02T20:17:14.651Z,1428005834.651 [ComponentRegistry](DEBUG): Component "logger" handled in its own thread.
2015-04-02T20:17:14.654Z,1428005834.654 [logger ThreadHandler](DEBUG): Created PCaller Thread at 403DC4E0
2015-04-02T20:17:14.654Z,1428005834.654 [logger ThreadHandler](INFO): Protected caller Thread ID is 771
2015-04-02T20:17:14.656Z,1428005834.656 [ComponentRegistry](DEBUG): SyncComponent "LogSplitter" handled in the control thread.
2015-04-02T20:17:14.657Z,1428005834.657 [Supervisor](INFO): Looking for Config files in directory: Config/
2015-04-02T20:17:14.660Z,1428005834.660 [Supervisor](INFO): Opening Config file at: Config/Control.cfg
2015-04-02T20:17:15.032Z,1428005835.032 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Control
2015-04-02T20:17:15.033Z,1428005835.033 [Supervisor](INFO): Opening Config file at: Config/BIT.cfg
2015-04-02T20:17:15.228Z,1428005835.228 [ComponentRegistry](DEBUG): Loaded Config Component "Config/BIT
2015-04-02T20:17:15.228Z,1428005835.228 [Supervisor](INFO): Opening Config file at: Config/Derivation.cfg
2015-04-02T20:17:15.347Z,1428005835.347 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Derivation
2015-04-02T20:17:15.347Z,1428005835.347 [Supervisor](INFO): Opening Config file at: Config/Estimation.cfg
2015-04-02T20:17:15.484Z,1428005835.484 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Estimation
2015-04-02T20:17:15.485Z,1428005835.485 [Supervisor](INFO): Opening Config file at: Config/Guidance.cfg
2015-04-02T20:17:15.583Z,1428005835.583 [Supervisor](INFO): Opening Config file at: Config/Navigation.cfg
2015-04-02T20:17:15.764Z,1428005835.764 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Navigation
2015-04-02T20:17:15.765Z,1428005835.765 [Supervisor](INFO): Opening Config file at: Config/Sample.cfg
2015-04-02T20:17:15.863Z,1428005835.863 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Sample
2015-04-02T20:17:15.864Z,1428005835.864 [Supervisor](INFO): Opening Config file at: Config/Science.cfg
2015-04-02T20:17:16.101Z,1428005836.101 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Science
2015-04-02T20:17:16.103Z,1428005836.103 [Supervisor](INFO): Opening Config file at: Config/Sensor.cfg
2015-04-02T20:17:16.504Z,1428005836.504 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Sensor
2015-04-02T20:17:16.505Z,1428005836.505 [Supervisor](INFO): Opening Config file at: Config/Servo.cfg
2015-04-02T20:17:16.847Z,1428005836.847 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Servo
2015-04-02T20:17:16.848Z,1428005836.848 [Supervisor](INFO): Opening Config file at: Config/Simulator.cfg
2015-04-02T20:17:17.420Z,1428005837.420 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Simulator
2015-04-02T20:17:17.420Z,1428005837.420 [Supervisor](INFO): Opening Config file at: Config/logger.cfg
2015-04-02T20:17:17.660Z,1428005837.660 [ComponentRegistry](DEBUG): Loaded Config Component "Config/logger
2015-04-02T20:17:17.660Z,1428005837.660 [Supervisor](INFO): Opening Config file at: Config/secure.cfg
2015-04-02T20:17:17.778Z,1428005837.778 [ComponentRegistry](DEBUG): Loaded Config Component "Config/secure
2015-04-02T20:17:17.779Z,1428005837.779 [Supervisor](INFO): Opening Config file at: Config/vehicle.cfg
2015-04-02T20:17:18.257Z,1428005838.257 [ComponentRegistry](DEBUG): Loaded Config Component "Config/vehicle
2015-04-02T20:17:18.257Z,1428005838.257 [Supervisor](INFO): Opening Config file at: Config/workSite.cfg
2015-04-02T20:17:18.419Z,1428005838.419 [ComponentRegistry](DEBUG): Loaded Config Component "Config/workSite
2015-04-02T20:17:18.421Z,1428005838.421 [Supervisor](INFO): Looking for Config files in directory: Config/lrauv-daphne/
2015-04-02T20:17:18.424Z,1428005838.424 [Supervisor](INFO): Opening Config file at: Config/lrauv-daphne/Control.cfg
2015-04-02T20:17:18.545Z,1428005838.545 [Supervisor](INFO): Opening Config file at: Config/lrauv-daphne/BIT.cfg
2015-04-02T20:17:18.681Z,1428005838.681 [Supervisor](INFO): Opening Config file at: Config/lrauv-daphne/logger.cfg
2015-04-02T20:17:18.790Z,1428005838.790 [Supervisor](INFO): Opening Config file at: Config/lrauv-daphne/Estimation.cfg
2015-04-02T20:17:18.912Z,1428005838.912 [Supervisor](INFO): Opening Config file at: Config/lrauv-daphne/Navigation.cfg
2015-04-02T20:17:19.018Z,1428005839.018 [Supervisor](INFO): Opening Config file at: Config/lrauv-daphne/Science.cfg
2015-04-02T20:17:19.162Z,1428005839.162 [Supervisor](INFO): Opening Config file at: Config/lrauv-daphne/Sensor.cfg
2015-04-02T20:17:19.339Z,1428005839.339 [Supervisor](INFO): Opening Config file at: Config/lrauv-daphne/Servo.cfg
2015-04-02T20:17:19.451Z,1428005839.451 [Supervisor](INFO): Opening Config file at: Config/lrauv-daphne/Simulator.cfg
2015-04-02T20:17:19.551Z,1428005839.551 [Supervisor](INFO): Opening Config file at: Config/lrauv-daphne/workSite.cfg
2015-04-02T20:17:19.641Z,1428005839.641 [Supervisor](INFO): Opening Config file at: Config/lrauv-daphne/secure.cfg
2015-04-02T20:17:19.751Z,1428005839.751 [Supervisor](INFO): Opening Config file at: Config/lrauv-daphne/vehicle.cfg
2015-04-02T20:17:19.880Z,1428005839.880 [Supervisor](INFO): Opening Config file at: Config/lrauv-daphne/Battery.cfg
2015-04-02T20:17:20.151Z,1428005840.151 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Battery
2015-04-02T20:17:20.152Z,1428005840.152 [Supervisor](IMPORTANT): Reading configuration overrides from Data/persisted.cfg
2015-04-02T20:17:20.164Z,1428005840.164 [Module Loader](DEBUG): Loading Module at Modules/Control.so
2015-04-02T20:17:20.247Z,1428005840.247 [VerticalControl](DEBUG): Construct VerticalControl.
2015-04-02T20:17:20.392Z,1428005840.392 [VerticalControl] Loaded
2015-04-02T20:17:20.392Z,1428005840.392 [ComponentRegistry](DEBUG): SyncComponent "VerticalControl" handled in the control thread.
2015-04-02T20:17:20.393Z,1428005840.393 [HorizontalControl](DEBUG): Construct HorizontalControl.
2015-04-02T20:17:20.479Z,1428005840.479 [HorizontalControl] Loaded
2015-04-02T20:17:20.479Z,1428005840.479 [ComponentRegistry](DEBUG): SyncComponent "HorizontalControl" handled in the control thread.
2015-04-02T20:17:20.480Z,1428005840.480 [SpeedControl](DEBUG): Construct SpeedControl.
2015-04-02T20:17:20.487Z,1428005840.487 [SpeedControl] Loaded
2015-04-02T20:17:20.487Z,1428005840.487 [ComponentRegistry](DEBUG): SyncComponent "SpeedControl" handled in the control thread.
2015-04-02T20:17:20.488Z,1428005840.488 [LoopControl](DEBUG): Construct LoopControl.
2015-04-02T20:17:20.489Z,1428005840.489 [LoopControl] Loaded
2015-04-02T20:17:20.489Z,1428005840.489 [ComponentRegistry](DEBUG): SyncComponent "LoopControl" handled in the control thread.
2015-04-02T20:17:20.489Z,1428005840.489 [Module Loader](DEBUG): Loaded Module: Control (Contains the Control components, such as Depth, Heading, and Speed Control)
2015-04-02T20:17:20.490Z,1428005840.490 [Module Loader](DEBUG): Loading Module at Modules/BIT.so
2015-04-02T20:17:20.674Z,1428005840.674 [SBIT](DEBUG): Construct Startup Built In Test.
2015-04-02T20:17:20.686Z,1428005840.686 [SBIT] Loaded
2015-04-02T20:17:20.686Z,1428005840.686 [ComponentRegistry](DEBUG): SyncComponent "SBIT" handled in the control thread.
2015-04-02T20:17:20.687Z,1428005840.687 [IBIT](DEBUG): Construct Initiated Built In Test.
2015-04-02T20:17:20.718Z,1428005840.718 [IBIT] Loaded
2015-04-02T20:17:20.718Z,1428005840.718 [ComponentRegistry](DEBUG): SyncComponent "IBIT" handled in the control thread.
2015-04-02T20:17:20.721Z,1428005840.721 [CBIT](DEBUG): Construct Continuous Built In Test.
2015-04-02T20:17:20.889Z,1428005840.889 [CBIT] Loaded
2015-04-02T20:17:20.889Z,1428005840.889 [ComponentRegistry](DEBUG): SyncComponent "CBIT" handled in the control thread.
2015-04-02T20:17:20.889Z,1428005840.889 [Module Loader](DEBUG): Loaded Module: BIT (Contains the BuiltInTest components, such as C Built In Test)
2015-04-02T20:17:20.890Z,1428005840.890 [Module Loader](DEBUG): Loading Module at Modules/Derivation.so
2015-04-02T20:17:20.922Z,1428005840.922 [DepthRateCalculator] Loaded
2015-04-02T20:17:20.922Z,1428005840.922 [ComponentRegistry](DEBUG): SyncComponent "DepthRateCalculator" handled in the control thread.
2015-04-02T20:17:20.928Z,1428005840.928 [PitchRateCalculator] Loaded
2015-04-02T20:17:20.929Z,1428005840.929 [ComponentRegistry](DEBUG): SyncComponent "PitchRateCalculator" handled in the control thread.
2015-04-02T20:17:20.945Z,1428005840.945 [SpeedCalculator] Loaded
2015-04-02T20:17:20.945Z,1428005840.945 [ComponentRegistry](DEBUG): SyncComponent "SpeedCalculator" handled in the control thread.
2015-04-02T20:17:20.963Z,1428005840.963 [TempGradientCalculator] Loaded
2015-04-02T20:17:20.964Z,1428005840.964 [ComponentRegistry](DEBUG): SyncComponent "TempGradientCalculator" handled in the control thread.
2015-04-02T20:17:20.969Z,1428005840.969 [YawRateCalculator] Loaded
2015-04-02T20:17:20.969Z,1428005840.969 [ComponentRegistry](DEBUG): SyncComponent "YawRateCalculator" handled in the control thread.
2015-04-02T20:17:20.970Z,1428005840.970 [Module Loader](DEBUG): Loaded Module: Derivation (Contains the base derivation components)
2015-04-02T20:17:20.971Z,1428005840.971 [Module Loader](DEBUG): Loading Module at Modules/Estimation.so
2015-04-02T20:17:21.067Z,1428005841.067 [Module Loader](DEBUG): Loaded Module: Estimation (Contains the base estimation components)
2015-04-02T20:17:21.067Z,1428005841.067 [Module Loader](DEBUG): Loading Module at Modules/Guidance.so
2015-04-02T20:17:21.391Z,1428005841.391 [Module Loader](DEBUG): Loaded Module: Guidance (Contains behaviors and commands)
2015-04-02T20:17:21.392Z,1428005841.392 [Module Loader](DEBUG): Loading Module at Modules/Navigation.so
2015-04-02T20:17:21.512Z,1428005841.512 [DeadReckonUsingMultipleVelocitySources] Loaded
2015-04-02T20:17:21.512Z,1428005841.512 [ComponentRegistry](DEBUG): SyncComponent "DeadReckonUsingMultipleVelocitySources" handled in the control thread.
2015-04-02T20:17:21.569Z,1428005841.569 [DeadReckonUsingSpeedCalculator] Loaded
2015-04-02T20:17:21.570Z,1428005841.570 [ComponentRegistry](DEBUG): SyncComponent "DeadReckonUsingSpeedCalculator" handled in the control thread.
2015-04-02T20:17:21.588Z,1428005841.588 [NavChart] Loaded
2015-04-02T20:17:21.588Z,1428005841.588 [ComponentRegistry](DEBUG): SyncComponent "NavChart" handled in the control thread.
2015-04-02T20:17:21.594Z,1428005841.594 [UniversalFixResidualReporter] Loaded
2015-04-02T20:17:21.594Z,1428005841.594 [ComponentRegistry](DEBUG): SyncComponent "UniversalFixResidualReporter" handled in the control thread.
2015-04-02T20:17:21.594Z,1428005841.594 [Module Loader](DEBUG): Loaded Module: Navigation (Contains the base navigation components)
2015-04-02T20:17:21.595Z,1428005841.595 [Module Loader](DEBUG): Loading Module at Modules/Sample.so
2015-04-02T20:17:21.604Z,1428005841.604 [Module Loader](DEBUG): Loaded Module: Sample (This is a Sample Module of Sample Components)
2015-04-02T20:17:21.604Z,1428005841.604 [Module Loader](DEBUG): Loading Module at Modules/Science.so
2015-04-02T20:17:21.818Z,1428005841.818 [Aanderaa_O2] Loaded
2015-04-02T20:17:21.818Z,1428005841.818 [ComponentRegistry](DEBUG): SyncComponent "Aanderaa_O2" handled in the control thread.
2015-04-02T20:17:21.909Z,1428005841.909 [CTD_NeilBrown] Loaded
2015-04-02T20:17:21.910Z,1428005841.910 [ComponentRegistry](DEBUG): Component "CTD_NeilBrown" handled in its own thread.
2015-04-02T20:17:21.913Z,1428005841.913 [CTD_NeilBrown ThreadHandler](DEBUG): Created PCaller Thread at 405764E0
2015-04-02T20:17:21.913Z,1428005841.913 [CTD_NeilBrown ThreadHandler](INFO): Protected caller Thread ID is 856
2015-04-02T20:17:21.927Z,1428005841.927 [ISUS] Loaded
2015-04-02T20:17:21.927Z,1428005841.927 [ComponentRegistry](DEBUG): SyncComponent "ISUS" handled in the control thread.
2015-04-02T20:17:21.947Z,1428005841.947 [PAR_Licor] Loaded
2015-04-02T20:17:21.948Z,1428005841.948 [ComponentRegistry](DEBUG): SyncComponent "PAR_Licor" handled in the control thread.
2015-04-02T20:17:22.004Z,1428005842.004 [WetLabsBB2FL] Loaded
2015-04-02T20:17:22.004Z,1428005842.004 [ComponentRegistry](DEBUG): Component "WetLabsBB2FL" handled in its own thread.
2015-04-02T20:17:22.009Z,1428005842.009 [WetLabsBB2FL ThreadHandler](DEBUG): Created PCaller Thread at 405A64E0
2015-04-02T20:17:22.009Z,1428005842.009 [WetLabsBB2FL ThreadHandler](INFO): Protected caller Thread ID is 857
2015-04-02T20:17:22.010Z,1428005842.010 [Module Loader](DEBUG): Loaded Module: Science (Contains the science components)
2015-04-02T20:17:22.011Z,1428005842.011 [Module Loader](DEBUG): Loading Module at Modules/Sensor.so
2015-04-02T20:17:22.815Z,1428005842.815 [AHRS_sp3003D] Loaded
2015-04-02T20:17:22.815Z,1428005842.815 [ComponentRegistry](DEBUG): SyncComponent "AHRS_sp3003D" handled in the control thread.
2015-04-02T20:17:23.008Z,1428005843.008 [DataOverHttps] Loaded
2015-04-02T20:17:23.009Z,1428005843.009 [ComponentRegistry](DEBUG): SyncComponent "DataOverHttps" handled in the control thread.
2015-04-02T20:17:23.027Z,1428005843.027 [Depth_Keller] Loaded
2015-04-02T20:17:23.028Z,1428005843.028 [ComponentRegistry](DEBUG): SyncComponent "Depth_Keller" handled in the control thread.
2015-04-02T20:17:23.033Z,1428005843.033 [DropWeight] Loaded
2015-04-02T20:17:23.034Z,1428005843.034 [ComponentRegistry](DEBUG): SyncComponent "DropWeight" handled in the control thread.
2015-04-02T20:17:23.191Z,1428005843.191 [DVL_micro] Loaded
2015-04-02T20:17:23.191Z,1428005843.191 [ComponentRegistry](DEBUG): SyncComponent "DVL_micro" handled in the control thread.
2015-04-02T20:17:23.307Z,1428005843.307 [NAL9602] Loaded
2015-04-02T20:17:23.307Z,1428005843.307 [ComponentRegistry](DEBUG): SyncComponent "NAL9602" handled in the control thread.
2015-04-02T20:17:23.362Z,1428005843.362 [Onboard] Loaded
2015-04-02T20:17:23.362Z,1428005843.362 [ComponentRegistry](DEBUG): SyncComponent "Onboard" handled in the control thread.
2015-04-02T20:17:23.369Z,1428005843.369 [Radio_Surface] Loaded
2015-04-02T20:17:23.370Z,1428005843.370 [ComponentRegistry](DEBUG): Component "Radio_Surface" handled in its own thread.
2015-04-02T20:17:23.371Z,1428005843.371 [Radio_Surface ThreadHandler](DEBUG): Created PCaller Thread at 407F64E0
2015-04-02T20:17:23.371Z,1428005843.371 [Radio_Surface ThreadHandler](INFO): Protected caller Thread ID is 858
2015-04-02T20:17:25.617Z,1428005845.617 [BPC1] Loaded
2015-04-02T20:17:25.617Z,1428005845.617 [ComponentRegistry](DEBUG): SyncComponent "BPC1" handled in the control thread.
2015-04-02T20:17:25.618Z,1428005845.618 [Module Loader](DEBUG): Loaded Module: Sensor (Contains the sensor components)
2015-04-02T20:17:25.619Z,1428005845.619 [Module Loader](DEBUG): Loading Module at Modules/Servo.so
2015-04-02T20:17:25.769Z,1428005845.769 [BuoyancyServo] Loaded
2015-04-02T20:17:25.769Z,1428005845.769 [ComponentRegistry](DEBUG): SyncComponent "BuoyancyServo" handled in the control thread.
2015-04-02T20:17:25.787Z,1428005845.787 [ElevatorServo] Loaded
2015-04-02T20:17:25.787Z,1428005845.787 [ComponentRegistry](DEBUG): SyncComponent "ElevatorServo" handled in the control thread.
2015-04-02T20:17:25.800Z,1428005845.800 [MassServo] Loaded
2015-04-02T20:17:25.800Z,1428005845.800 [ComponentRegistry](DEBUG): SyncComponent "MassServo" handled in the control thread.
2015-04-02T20:17:25.813Z,1428005845.813 [RudderServo] Loaded
2015-04-02T20:17:25.814Z,1428005845.814 [ComponentRegistry](DEBUG): SyncComponent "RudderServo" handled in the control thread.
2015-04-02T20:17:25.830Z,1428005845.830 [ThrusterServo] Loaded
2015-04-02T20:17:25.830Z,1428005845.830 [ComponentRegistry](DEBUG): SyncComponent "ThrusterServo" handled in the control thread.
2015-04-02T20:17:25.831Z,1428005845.831 [Module Loader](DEBUG): Loaded Module: Servo (This is the module containing motor controllers)
2015-04-02T20:17:25.832Z,1428005845.832 [Module Loader](DEBUG): Loading Module at Modules/Simulator.so
2015-04-02T20:17:25.992Z,1428005845.992 [Module Loader](DEBUG): Loaded Module: Simulator (This is the module containing the Simulator)
2015-04-02T20:17:25.993Z,1428005845.993 [Module Loader](DEBUG): Loading Module at Modules/Trigger.so
2015-04-02T20:17:26.034Z,1428005846.034 [Module Loader](DEBUG): Loaded Module: Trigger (Contains triggers for use in missions)
2015-04-02T20:17:26.040Z,1428005846.040 [ComponentRegistry](DEBUG): SyncComponent "MissionManager" handled in the control thread.
2015-04-02T20:17:26.041Z,1428005846.041 [ComponentRegistry](DEBUG): SyncComponent "Reporter" handled in the control thread.
2015-04-02T20:17:26.048Z,1428005846.048 [ComponentRegistry](DEBUG): Component "NavChartDb" handled in its own thread.
2015-04-02T20:17:26.051Z,1428005846.051 [NavChartDb ThreadHandler](DEBUG): Created PCaller Thread at 408A74E0
2015-04-02T20:17:26.052Z,1428005846.052 [NavChartDb ThreadHandler](INFO): Protected caller Thread ID is 859
2015-04-02T20:17:26.056Z,1428005846.056 [Supervisor](INFO): Main Thread ID is 763
2015-04-02T20:17:26.056Z,1428005846.056 [Supervisor](DEBUG): Running supervisor.
2015-04-02T20:17:26.057Z,1428005846.057 [CommandLine ThreadHandler](INFO): Handler Thread ID is 860
2015-04-02T20:17:26.064Z,1428005846.064 [controlThread ThreadHandler](INFO): Handler Thread ID is 861
2015-04-02T20:17:26.064Z,1428005846.064 [controlThread](DEBUG): Initializing ControlThread
2015-04-02T20:17:26.065Z,1428005846.065 [VerticalControl](DEBUG): Initialize VerticalControlComponent.
2015-04-02T20:17:26.067Z,1428005846.067 [HorizontalControl](DEBUG): Initialize HorizontalControlComponent.
2015-04-02T20:17:26.067Z,1428005846.067 [SpeedControl](DEBUG): Initialize SpeedControlComponent.
2015-04-02T20:17:26.068Z,1428005846.068 [LoopControl](DEBUG): Initialize LoopControlComponent.
2015-04-02T20:17:26.068Z,1428005846.068 [SBIT](INFO): Initialize SBIT Component.
2015-04-02T20:17:26.069Z,1428005846.069 [SBIT](IMPORTANT): Tethys CM Info: SVN revision:12068
2015-04-02T20:17:26.069Z,1428005846.069 [SBIT](IMPORTANT): Kernel Release: 2.6.27.8
2015-04-02T20:17:26.069Z,1428005846.069 [SBIT](IMPORTANT): Kernel Version:#639 PREEMPT Wed Mar 12 12:53:33 PDT 2014
2015-04-02T20:17:26.070Z,1428005846.070 [IBIT](INFO): Initialize IBIT Component.
2015-04-02T20:17:26.071Z,1428005846.071 [CBIT](DEBUG): Initialize CBIT Component.
2015-04-02T20:17:26.071Z,1428005846.071 [CBIT](INFO): Last reboot was NOT due to watchdog timer.
2015-04-02T20:17:26.076Z,1428005846.076 [logger ThreadHandler](INFO): Handler Thread ID is 862
2015-04-02T20:17:26.096Z,1428005846.096 [DepthRateCalculator](DEBUG): Initializing DepthRateCalculator.
2015-04-02T20:17:26.096Z,1428005846.096 [PitchRateCalculator](DEBUG): Initializing PitchRateCalculator.
2015-04-02T20:17:26.096Z,1428005846.096 [SpeedCalculator](DEBUG): Initializing SpeedCalculator.
2015-04-02T20:17:26.097Z,1428005846.097 [TempGradientCalculator](DEBUG): Initializing TempGradientCalculator.
2015-04-02T20:17:26.097Z,1428005846.097 [YawRateCalculator](DEBUG): Initializing YawRateCalculator.
2015-04-02T20:17:26.098Z,1428005846.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2015-04-02T20:17:26.098Z,1428005846.098 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2015-04-02T20:17:26.099Z,1428005846.099 [NavChart](DEBUG): Initialize NavChart Navigation.
2015-04-02T20:17:26.099Z,1428005846.099 [UniversalFixResidualReporter](DEBUG): Initializing UniversalFixResidualReporter component.
2015-04-02T20:17:26.116Z,1428005846.116 [MissionManager](INFO): Loading Mission: Missions/Startup.xml
2015-04-02T20:17:26.137Z,1428005846.137 [CTD_NeilBrown ThreadHandler](INFO): Handler Thread ID is 863
2015-04-02T20:17:26.138Z,1428005846.138 [CTD_NeilBrown](DEBUG): Initializing CTD_NeilBrown.
2015-04-02T20:17:26.144Z,1428005846.144 [CTD_NeilBrown](INFO): Opening uart, block timeout 10ths=4
2015-04-02T20:17:26.164Z,1428005846.164 [WetLabsBB2FL ThreadHandler](INFO): Handler Thread ID is 865
2015-04-02T20:17:26.165Z,1428005846.165 [WetLabsBB2FL](INFO): Powering down
2015-04-02T20:17:26.182Z,1428005846.182 [Startup:A.GoToSurface](DEBUG): Construct GoToSurface.
2015-04-02T20:17:26.204Z,1428005846.204 [Radio_Surface ThreadHandler](INFO): Handler Thread ID is 866
2015-04-02T20:17:26.211Z,1428005846.211 [Radio_Surface](INFO): Powering up
2015-04-02T20:17:26.223Z,1428005846.223 [MissionManager](DEBUG): 
<?xml version="1.0" encoding="UTF-8"?>
<Mission xmlns="Tethys"
       xmlns:Control="Tethys/Control"
       xmlns:Guidance="Tethys/Guidance" 
       xmlns:Units="Tethys/Units"
       xmlns:Universal="Tethys/Universal"
       xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
       xsi:schemaLocation="Tethys http://aosn.mbari.org/tethys/Xml/Tethys.xsd
                           Tethys/Control http://aosn.mbari.org/tethys/Xml/Control.xsd
                           Tethys/Guidance http://aosn.mbari.org/tethys/Xml/Guidance.xsd
                           Tethys/Units http://aosn.mbari.org/tethys/Xml/Units.xsd
                           Tethys/Universal http://aosn.mbari.org/tethys/Xml/Universal.xsd"
       Id="Startup">

    <Guidance:GoToSurface>
        <Progression/>
    </Guidance:GoToSurface>

    <Aggregate Id="StartupSatComms">

        <Sequence/>

        <ReadDatum>
            <Timeout Duration="P1M" />
            <Universal:latitude_fix/>
        </ReadDatum>

        <ReadDatum>
            <Timeout Duration="P1M" />
            <Universal:platform_communications/>
        </ReadDatum>

    </Aggregate>

</Mission>


2015-04-02T20:17:26.228Z,1428005846.228 [MissionManager](INFO): Loading Mission: Missions/Default.xml
2015-04-02T20:17:26.230Z,1428005846.230 [NavChartDb ThreadHandler](INFO): Handler Thread ID is 867
2015-04-02T20:17:26.242Z,1428005846.242 [NavChartDb](INFO): Looking for Electronic Nav Chart files in directory: Resources
2015-04-02T20:17:26.244Z,1428005846.244 [NavChartDb](INFO): Already Loaded Electronic Nav Chart data from US1WC07M.000
2015-04-02T20:17:26.244Z,1428005846.244 [NavChartDb](INFO): Already Loaded Electronic Nav Chart data from US2WC11M.000
2015-04-02T20:17:26.244Z,1428005846.244 [NavChartDb](INFO): Already Loaded Electronic Nav Chart data from US3CA52M.000
2015-04-02T20:17:26.245Z,1428005846.245 [NavChartDb](INFO): Already Loaded Electronic Nav Chart data from US4CA60M.000
2015-04-02T20:17:26.245Z,1428005846.245 [NavChartDb](INFO): Already Loaded Electronic Nav Chart data from US5CA50M.000
2015-04-02T20:17:26.245Z,1428005846.245 [NavChartDb](INFO): Already Loaded Electronic Nav Chart data from US5CA61M.000
2015-04-02T20:17:26.245Z,1428005846.245 [NavChartDb](INFO): Already Loaded Electronic Nav Chart data from US5CA62M.000
2015-04-02T20:17:26.246Z,1428005846.246 [NavChartDb](INFO): Already Loaded Electronic Nav Chart data from US5CA83M.000
2015-04-02T20:17:26.272Z,1428005846.272 [CTD_NeilBrown](DEBUG): CTD uart timeout: serial timeout
2015-04-02T20:17:26.272Z,1428005846.272 [CTD_NeilBrown](ERROR): Could not get real or simulated CTD data. startTime.elapsed() = 0.127799
2015-04-02T20:17:26.364Z,1428005846.364 [MissionManager](INFO): DefineArg Default.TimeMissionWasStarted = 0.000000 h
2015-04-02T20:17:26.368Z,1428005846.368 [MissionManager](INFO): DefineArg Default.ElapsedSinceMissionWasStarted = 0.000000 h
2015-04-02T20:17:26.388Z,1428005846.388 [Default:B.GoToSurface](DEBUG): Construct GoToSurface.
2015-04-02T20:17:26.414Z,1428005846.414 [Default:CheckIn:A.SetSpeed](DEBUG): Construct.
2015-04-02T20:17:26.436Z,1428005846.436 [Default:CheckIn:Read_Iridium:A_Timeout:A.Execute](DEBUG): Construct Execute.
2015-04-02T20:17:26.469Z,1428005846.469 [Default:WaitAtTheSurface:RunApplicationAtLowSpeed.SetSpeed](DEBUG): Construct.
2015-04-02T20:17:26.475Z,1428005846.475 [MissionManager](DEBUG): 
<?xml version="1.0" encoding="UTF-8"?>
<Mission xmlns="Tethys"
xmlns:Control="Tethys/Control"
xmlns:Guidance="Tethys/Guidance" 
xmlns:Units="Tethys/Units"
xmlns:Universal="Tethys/Universal"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:schemaLocation="Tethys http://aosn.mbari.org/tethys/Xml/Tethys.xsd
Tethys/Control http://aosn.mbari.org/tethys/Xml/Control.xsd
Tethys/Guidance http://aosn.mbari.org/tethys/Xml/Guidance.xsd
Tethys/Units http://aosn.mbari.org/tethys/Xml/Units.xsd
Tethys/Universal http://aosn.mbari.org/tethys/Xml/Universal.xsd"
Id="Default">

    <DefineArg Name="TimeMissionWasStarted"><Units:hour/><Value>0</Value></DefineArg>

    <DefineArg Name="ElapsedSinceMissionWasStarted"><Units:hour/><Value>0</Value></DefineArg>

    <Aggregate Id="StartClock">

        <Sequence/>

        <Assign><Arg Name="TimeMissionWasStarted"/><Universal:time/></Assign>

    </Aggregate>

    <Guidance:GoToSurface>
        <Progression/>
    </Guidance:GoToSurface>

    <Aggregate Id="CheckIn">

        <When>
            <Elapsed><Universal:platform_communications/></Elapsed>
            <Gt><Units:minute/><Value>5.0</Value></Gt>
            <And><Universal:platform_conversation/><Eq><True/></Eq></And>
            <Or><Elapsed><Universal:platform_communications/></Elapsed><Gt><Units:hour/><Value>1.0</Value></Gt></Or>
        </When>

<!-- TODO: Do we really want this When operating on platform_communications? or on something else like time_fix? -->

<!-- Run application at high speed -->

        <Guidance:SetSpeed>
            <Parallel/>
            <Setting><Guidance:SetSpeed.period/><Units:millisecond/><Value>400</Value></Setting>
        </Guidance:SetSpeed>

        <ReadDatum Id="Read_GPS">
            <Timeout Duration="P5M"/>
<!-- NOTE: Original Default.xml didn't have a timeout on the GPS read, so theoretically could have hung indefinitely there... -->
            <Universal:latitude_fix/>
        </ReadDatum>

<!-- Do data comms -->

        <ReadDatum Id="Read_Iridium">
            <Timeout Duration="P2H">
                <Guidance:Execute>
                    <Sequence/>
                    <Setting><Guidance:Execute.command/><String>Burn 300</String></Setting>
                </Guidance:Execute>
                <Syslog Severity="Critical">Dropped drop weight due to communications timeout</Syslog>
            </Timeout>
            <Universal:platform_communications/>
        </ReadDatum>

    </Aggregate>

    <Aggregate Id="UpdateAndReportMinutesSinceMissionStarted">

        <When>
            <Elapsed><Arg Name="ElapsedSinceMissionWasStarted"/></Elapsed>
            <Gt><Units:minute/><Value>5.0</Value></Gt>
        </When>

        <Assign><Arg Name="ElapsedSinceMissionWasStarted"/><Universal:time/><Sub><Arg Name="TimeMissionWasStarted"/></Sub></Assign>

        <Syslog Severity="Important">Default mission has been running for <Arg Name="ElapsedSinceMissionWasStarted"/><Units:minute/></Syslog>

    </Aggregate>

    <Aggregate Id="WaitAtTheSurface">

        <Sequence/>

        <Guidance:SetSpeed Id="RunApplicationAtLowSpeed">
            <Parallel/>
            <Setting><Guidance:SetSpeed.period/><Units:second/><Value>5</Value></Setting>
        </Guidance:SetSpeed>

    </Aggregate>

</Mission>


2015-04-02T20:17:26.482Z,1428005846.482 [controlThread](DEBUG): Component order: CycleStarter,Aanderaa_O2,ISUS,PAR_Licor,AHRS_sp3003D,DataOverHttps,Depth_Keller,DropWeight,DVL_micro,NAL9602,Onboard,BPC1,PAR_Licor,Depth_Keller,DepthRateCalculator,PitchRateCalculator,SpeedCalculator,TempGradientCalculator,YawRateCalculator,DeadReckonUsingMultipleVelocitySources,DeadReckonUsingSpeedCalculator,NavChart,UniversalFixResidualReporter,MissionManager,VerticalControl,HorizontalControl,SpeedControl,LoopControl,BuoyancyServo,ElevatorServo,MassServo,RudderServo,ThrusterServo,SBIT,IBIT,CBIT,Reporter,LogSplitter,
2015-04-02T20:17:26.671Z,1428005846.671 [AHRS_sp3003D](DEBUG): Initializing AHRS_sp3003D.
2015-04-02T20:17:26.710Z,1428005846.710 [Depth_Keller](ERROR): Pressure reading out of range: 1831.023193 decibar
2015-04-02T20:17:26.950Z,1428005846.950 [DVL_micro](INFO): Initializing
2015-04-02T20:17:27.136Z,1428005847.136 [DepthRateCalculator](ERROR): Depth measurement is not active
2015-04-02T20:17:27.206Z,1428005847.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:17:27.499Z,1428005847.499 [BuoyancyServo](DEBUG): Initializing EZServoServo.
2015-04-02T20:17:27.510Z,1428005847.510 [BuoyancyServo](DEBUG): Initializing BuoyancyServo.
2015-04-02T20:17:27.529Z,1428005847.529 [ElevatorServo](DEBUG): Initializing EZServoServo.
2015-04-02T20:17:27.538Z,1428005847.538 [ElevatorServo](DEBUG): Initializing ElevatorServo.
2015-04-02T20:17:27.560Z,1428005847.560 [MassServo](DEBUG): Initializing EZServoServo.
2015-04-02T20:17:27.566Z,1428005847.566 [MassServo](DEBUG): Initializing MassServo.
2015-04-02T20:17:27.580Z,1428005847.580 [RudderServo](DEBUG): Initializing EZServoServo.
2015-04-02T20:17:27.582Z,1428005847.582 [RudderServo](DEBUG): Initializing RudderServo.
2015-04-02T20:17:27.612Z,1428005847.612 [ThrusterServo](DEBUG): Initializing EZServoServo.
2015-04-02T20:17:27.618Z,1428005847.618 [ThrusterServo](DEBUG): Initializing ThrusterServo.
2015-04-02T20:17:28.114Z,1428005848.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:17:28.463Z,1428005848.463 [BuoyancyServo](ERROR): Buoyancy initialization uart error serial timeout
2015-04-02T20:17:28.463Z,1428005848.463 [BuoyancyServo](FAULT): Buoyancy failed to initialize
2015-04-02T20:17:28.463Z,1428005848.463 [BuoyancyServo] Communications Fault, FailCount= 1
2015-04-02T20:17:28.463Z,1428005848.463 [BuoyancyServo](ERROR): Communications Fault
2015-04-02T20:17:28.662Z,1428005848.662 [CBIT](ERROR): Communications Fault in component: BuoyancyServo
2015-04-02T20:17:28.995Z,1428005848.995 [NAL9602](INFO): Powering up NAL9602
2015-04-02T20:17:29.052Z,1428005849.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 2 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:17:29.075Z,1428005849.075 [BuoyancyServo](DEBUG): Uninitialize Buoyancy Servo.
2015-04-02T20:17:29.075Z,1428005849.075 [BuoyancyServo](INFO): Powering down
2015-04-02T20:17:29.593Z,1428005849.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 3 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:17:29.989Z,1428005849.989 [DVL_micro](ERROR): DVL Failure: Failed to read in all data items. Got 45 of 46
2015-04-02T20:17:29.990Z,1428005849.990 [DVL_micro](ERROR): Failed to parse DVL response:$#NQ.RES 0X0000 1 1 1 1 0.2 9.9 9.9 0.4 -4704.8 -71.4 104.6 1083.5 0 -615 86 0 0 1 1 0 -6418.8 -1541.4 -967.5 1 6313.3 2007.9 -0 0 0 0 0 0 0 0 0.80 1.76 184.3 0.2 18.6 0.005 35.0 1489 71
2015-04-02T20:17:30.050Z,1428005850.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 4 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:17:30.278Z,1428005850.278 [Aanderaa_O2](INFO): Powering down
2015-04-02T20:17:30.755Z,1428005850.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 5 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:17:31.347Z,1428005851.347 [CBIT](INFO): Clearing failed state for component BuoyancyServo
2015-04-02T20:17:31.347Z,1428005851.347 [BuoyancyServo] No Fault, FailCount= 1
2015-04-02T20:17:31.709Z,1428005851.709 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:17:31.770Z,1428005851.770 [BuoyancyServo](DEBUG): Initializing EZServoServo.
2015-04-02T20:17:31.889Z,1428005851.889 [BuoyancyServo](DEBUG): Initializing BuoyancyServo.
2015-04-02T20:17:32.351Z,1428005852.351 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:17:32.431Z,1428005852.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:17:33.181Z,1428005853.181 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:17:33.223Z,1428005853.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:17:33.629Z,1428005853.629 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:17:34.086Z,1428005854.086 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:17:34.559Z,1428005854.559 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:17:35.016Z,1428005855.016 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:17:35.488Z,1428005855.488 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:17:35.558Z,1428005855.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:17:36.053Z,1428005856.053 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:17:36.131Z,1428005856.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:17:36.530Z,1428005856.530 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:17:36.994Z,1428005856.994 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:17:37.467Z,1428005857.467 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:17:37.531Z,1428005857.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:17:37.940Z,1428005857.940 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:17:37.980Z,1428005857.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:17:38.381Z,1428005858.381 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:17:38.858Z,1428005858.858 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:17:39.278Z,1428005859.278 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:17:39.719Z,1428005859.719 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:17:40.156Z,1428005860.156 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:17:40.188Z,1428005860.188 [NAL9602](INFO): NAL9602 initialized
2015-04-02T20:17:40.262Z,1428005860.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:17:40.668Z,1428005860.668 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:17:40.795Z,1428005860.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:17:41.173Z,1428005861.173 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:17:41.642Z,1428005861.642 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:17:41.802Z,1428005861.802 [SBIT](IMPORTANT): Beginning Startup BIT
2015-04-02T20:17:41.805Z,1428005861.805 [CBIT](IMPORTANT): Beginning GF scan
2015-04-02T20:17:42.155Z,1428005862.155 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:17:42.763Z,1428005862.763 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:17:43.272Z,1428005863.272 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:17:43.785Z,1428005863.785 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:17:44.306Z,1428005864.306 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:17:44.859Z,1428005864.859 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:17:45.335Z,1428005865.335 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:17:45.880Z,1428005865.880 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:17:46.429Z,1428005866.429 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:17:46.497Z,1428005866.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:17:46.914Z,1428005866.914 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:17:46.952Z,1428005866.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:17:47.403Z,1428005867.403 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:17:47.971Z,1428005867.971 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:17:48.400Z,1428005868.400 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:17:48.919Z,1428005868.919 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:17:49.374Z,1428005869.374 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:17:49.879Z,1428005869.879 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:17:50.363Z,1428005870.363 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:17:50.868Z,1428005870.868 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:17:51.305Z,1428005871.305 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:17:51.376Z,1428005871.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:17:51.785Z,1428005871.785 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:17:51.831Z,1428005871.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:17:52.234Z,1428005872.234 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:17:52.743Z,1428005872.743 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:17:53.207Z,1428005873.207 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:17:53.290Z,1428005873.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:17:53.688Z,1428005873.688 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:17:53.735Z,1428005873.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:17:54.157Z,1428005874.157 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:17:54.698Z,1428005874.698 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:17:54.802Z,1428005874.802 [SBIT](ERROR): Could not read massPosReader_.
2015-04-02T20:17:55.171Z,1428005875.171 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:17:55.381Z,1428005875.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:17:55.773Z,1428005875.773 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:17:55.794Z,1428005875.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:17:56.201Z,1428005876.201 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:17:56.729Z,1428005876.729 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:17:57.158Z,1428005877.158 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:17:57.779Z,1428005877.779 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:17:58.384Z,1428005878.384 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:17:58.912Z,1428005878.912 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:17:59.401Z,1428005879.401 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:17:59.958Z,1428005879.958 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:18:00.472Z,1428005880.472 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:18:01.021Z,1428005881.021 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:18:01.480Z,1428005881.480 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:18:02.005Z,1428005882.005 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:18:02.526Z,1428005882.526 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:18:03.122Z,1428005883.122 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:18:03.773Z,1428005883.773 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:18:04.225Z,1428005884.225 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:18:04.681Z,1428005884.681 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:18:05.170Z,1428005885.170 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:18:05.615Z,1428005885.615 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:18:06.124Z,1428005886.124 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:18:06.553Z,1428005886.553 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:18:07.029Z,1428005887.029 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:18:07.486Z,1428005887.486 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:18:07.986Z,1428005887.986 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:18:08.463Z,1428005888.463 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:18:08.604Z,1428005888.604 [CBIT](FAULT): Low side GF detected
mA:
CHAN 5 (24V): 0.391695
CHAN 4 (Batt): 0.391695
CHAN 2 (12V): 0.391695
CHAN 1 (5V): 0.391695
CHAN 0 (3.3V): 0.265626
OPEN: 0.000765
Full Scale Calc: 0.392
2015-04-02T20:18:09.012Z,1428005889.012 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:18:09.600Z,1428005889.600 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:18:10.099Z,1428005890.099 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:18:10.631Z,1428005890.631 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:18:11.223Z,1428005891.223 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:18:11.668Z,1428005891.668 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:18:12.201Z,1428005892.201 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:18:12.658Z,1428005892.658 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:18:13.126Z,1428005893.126 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:18:13.167Z,1428005893.167 [BPC1](ERROR): Failed to receive battery data
2015-04-02T20:18:13.167Z,1428005893.167 [BPC1] Communications Fault, FailCount= 1
2015-04-02T20:18:13.167Z,1428005893.167 [BPC1](ERROR): Communications Fault
2015-04-02T20:18:13.301Z,1428005893.301 [CBIT](ERROR): Communications Fault in component: BPC1
2015-04-02T20:18:13.663Z,1428005893.663 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:18:14.176Z,1428005894.176 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:18:14.620Z,1428005894.620 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:18:14.763Z,1428005894.763 [CBIT](INFO): Clearing failed state for component BPC1
2015-04-02T20:18:14.763Z,1428005894.763 [BPC1] No Fault, FailCount= 1
2015-04-02T20:18:15.102Z,1428005895.102 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:18:15.678Z,1428005895.678 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:18:16.213Z,1428005896.213 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:18:16.684Z,1428005896.684 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:18:17.264Z,1428005897.264 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:18:17.711Z,1428005897.711 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:18:18.166Z,1428005898.166 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:18:18.647Z,1428005898.647 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:18:19.104Z,1428005899.104 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:18:19.578Z,1428005899.578 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:18:20.158Z,1428005900.158 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:18:20.602Z,1428005900.602 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:18:21.042Z,1428005901.042 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:18:21.483Z,1428005901.483 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:18:21.956Z,1428005901.956 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:18:22.381Z,1428005902.381 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:18:22.850Z,1428005902.850 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:18:23.274Z,1428005903.274 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:18:23.747Z,1428005903.747 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:18:24.345Z,1428005904.345 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:18:25.213Z,1428005905.213 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:18:25.707Z,1428005905.707 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:18:26.295Z,1428005906.295 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:18:26.792Z,1428005906.792 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:18:27.429Z,1428005907.429 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:18:28.090Z,1428005908.090 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:18:28.622Z,1428005908.622 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:18:29.075Z,1428005909.075 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:18:29.620Z,1428005909.620 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:18:30.157Z,1428005910.157 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:18:30.612Z,1428005910.612 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:18:31.150Z,1428005911.150 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:18:31.612Z,1428005911.612 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:18:32.061Z,1428005912.061 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:18:32.149Z,1428005912.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:18:32.562Z,1428005912.562 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:18:32.591Z,1428005912.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:18:32.985Z,1428005912.985 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:18:33.071Z,1428005913.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 2 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:18:33.455Z,1428005913.455 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:18:33.587Z,1428005913.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 3 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:18:33.995Z,1428005913.995 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:18:34.088Z,1428005914.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 4 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:18:34.483Z,1428005914.483 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:18:34.528Z,1428005914.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 5 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:18:34.928Z,1428005914.928 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:18:35.370Z,1428005915.370 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:18:35.823Z,1428005915.823 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:18:35.864Z,1428005915.864 [SBIT](CRITICAL): SBIT FAILED
2015-04-02T20:18:35.866Z,1428005915.866 [CommandLine](FAULT): Scheduling is paused
2015-04-02T20:18:36.258Z,1428005916.258 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:18:36.327Z,1428005916.327 [MissionManager](IMPORTANT): Started mission Startup
2015-04-02T20:18:36.327Z,1428005916.327 [Startup] Running Loop=1
2015-04-02T20:18:36.327Z,1428005916.327 [Startup](INFO): Aggregate::initialize Startup
2015-04-02T20:18:36.328Z,1428005916.328 [Startup:A.GoToSurface] Running Loop=1
2015-04-02T20:18:36.328Z,1428005916.328 [Startup:A.GoToSurface](DEBUG): Initialize GoToSurfaceComponent.
2015-04-02T20:18:36.329Z,1428005916.329 [Startup:A.GoToSurface](DEBUG): No depth rate setting specified. Using default value of nan m/s.
2015-04-02T20:18:36.329Z,1428005916.329 [Startup:A.GoToSurface](DEBUG): No pitch setting specified. Using default value of nan degrees.
2015-04-02T20:18:36.329Z,1428005916.329 [Startup:A.GoToSurface](DEBUG): No speed setting specified. Using default value of 0.500000 m/s.
2015-04-02T20:18:36.337Z,1428005916.337 [Startup:StartupSatComms] Running Loop=1
2015-04-02T20:18:36.337Z,1428005916.337 [Startup:StartupSatComms](INFO): Aggregate::initialize Startup:StartupSatComms
2015-04-02T20:18:36.337Z,1428005916.337 [Startup:StartupSatComms:A] Running Loop=1
2015-04-02T20:18:36.719Z,1428005916.719 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:18:36.788Z,1428005916.788 [Startup:StartupSatComms:A](DEBUG): Initialize ReadDataComponent to sense latitude_fix
2015-04-02T20:18:37.196Z,1428005917.196 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:18:37.644Z,1428005917.644 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:18:38.086Z,1428005918.086 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:18:38.937Z,1428005918.937 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:18:39.408Z,1428005919.408 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:18:39.872Z,1428005919.872 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:18:40.328Z,1428005920.328 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:18:40.930Z,1428005920.930 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:18:41.386Z,1428005921.386 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:18:41.855Z,1428005921.855 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:18:42.357Z,1428005922.357 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:18:42.804Z,1428005922.804 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:18:43.269Z,1428005923.269 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:18:43.710Z,1428005923.710 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:18:44.166Z,1428005924.166 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:18:44.223Z,1428005924.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:18:44.621Z,1428005924.621 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:18:44.635Z,1428005924.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:18:45.040Z,1428005925.040 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:18:45.473Z,1428005925.473 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:18:45.889Z,1428005925.889 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:18:46.330Z,1428005926.330 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:18:46.763Z,1428005926.763 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:18:47.235Z,1428005927.235 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:18:47.676Z,1428005927.676 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:18:48.125Z,1428005928.125 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:18:48.542Z,1428005928.542 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:18:48.576Z,1428005928.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:18:48.978Z,1428005928.978 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:18:48.993Z,1428005928.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:18:49.405Z,1428005929.405 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:18:49.909Z,1428005929.909 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:18:50.324Z,1428005930.324 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:18:50.387Z,1428005930.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:18:50.769Z,1428005930.769 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:18:50.799Z,1428005930.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:18:51.197Z,1428005931.197 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:18:51.658Z,1428005931.658 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:18:52.087Z,1428005932.087 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:18:52.130Z,1428005932.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:18:52.528Z,1428005932.528 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:18:52.541Z,1428005932.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:18:52.940Z,1428005932.940 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:18:53.014Z,1428005933.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 2 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:18:53.409Z,1428005933.409 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:18:53.434Z,1428005933.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 3 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:18:53.842Z,1428005933.842 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:18:53.890Z,1428005933.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 4 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:18:54.286Z,1428005934.286 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:18:54.300Z,1428005934.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 5 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:18:54.707Z,1428005934.707 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:18:55.116Z,1428005935.116 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:18:55.540Z,1428005935.540 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:18:56.049Z,1428005936.049 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:18:56.483Z,1428005936.483 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:18:56.966Z,1428005936.966 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:18:57.392Z,1428005937.392 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:18:57.860Z,1428005937.860 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:18:58.272Z,1428005938.272 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:18:58.725Z,1428005938.725 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:18:59.187Z,1428005939.187 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:18:59.610Z,1428005939.610 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:19:00.011Z,1428005940.011 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:19:00.468Z,1428005940.468 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:19:00.908Z,1428005940.908 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:19:01.361Z,1428005941.361 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:19:01.802Z,1428005941.802 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:19:01.830Z,1428005941.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:19:02.235Z,1428005942.235 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:19:02.258Z,1428005942.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:19:02.655Z,1428005942.655 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:19:03.097Z,1428005943.097 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:19:03.504Z,1428005943.504 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:19:03.929Z,1428005943.929 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:19:04.347Z,1428005944.347 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:19:04.766Z,1428005944.766 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:19:05.163Z,1428005945.163 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:19:05.620Z,1428005945.620 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:19:06.064Z,1428005946.064 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:19:06.131Z,1428005946.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:19:06.533Z,1428005946.533 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:19:06.580Z,1428005946.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:19:06.978Z,1428005946.978 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:19:07.423Z,1428005947.423 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:19:07.843Z,1428005947.843 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:19:08.281Z,1428005948.281 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:19:08.696Z,1428005948.696 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:19:09.129Z,1428005949.129 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:19:09.546Z,1428005949.546 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:19:09.990Z,1428005949.990 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:19:10.417Z,1428005950.417 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:19:10.904Z,1428005950.904 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:19:11.337Z,1428005951.337 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:19:11.829Z,1428005951.829 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:19:12.269Z,1428005952.269 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:19:12.739Z,1428005952.739 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:19:13.204Z,1428005953.204 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:19:13.644Z,1428005953.644 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:19:14.066Z,1428005954.066 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:19:14.092Z,1428005954.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:19:14.492Z,1428005954.492 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:19:14.506Z,1428005954.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:19:14.902Z,1428005954.902 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:19:15.359Z,1428005955.359 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:19:15.782Z,1428005955.782 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:19:16.234Z,1428005956.234 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:19:16.653Z,1428005956.653 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:19:17.085Z,1428005957.085 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:19:17.502Z,1428005957.502 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:19:17.931Z,1428005957.931 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:19:18.352Z,1428005958.352 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:19:18.780Z,1428005958.780 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:19:19.213Z,1428005959.213 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:19:19.674Z,1428005959.674 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:19:20.114Z,1428005960.114 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:19:20.559Z,1428005960.559 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:19:20.988Z,1428005960.988 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:19:21.424Z,1428005961.424 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:19:21.837Z,1428005961.837 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:19:22.278Z,1428005962.278 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:19:22.708Z,1428005962.708 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:19:23.127Z,1428005963.127 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:19:23.576Z,1428005963.576 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:19:24.004Z,1428005964.004 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:19:24.421Z,1428005964.421 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:19:24.526Z,1428005964.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:19:24.922Z,1428005964.922 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:19:24.956Z,1428005964.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:19:25.350Z,1428005965.350 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:19:25.445Z,1428005965.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 2 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:19:25.828Z,1428005965.828 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:19:25.842Z,1428005965.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 3 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:19:26.240Z,1428005966.240 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:19:26.708Z,1428005966.708 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:19:27.153Z,1428005967.153 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:19:27.602Z,1428005967.602 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:19:28.010Z,1428005968.010 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:19:28.067Z,1428005968.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:19:28.463Z,1428005968.463 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:19:28.494Z,1428005968.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:19:28.888Z,1428005968.888 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:19:29.365Z,1428005969.365 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:19:29.802Z,1428005969.802 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:19:30.217Z,1428005970.217 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:19:30.644Z,1428005970.644 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:19:31.059Z,1428005971.059 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:19:31.455Z,1428005971.455 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:19:31.876Z,1428005971.876 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:19:32.297Z,1428005972.297 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:19:32.322Z,1428005972.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:19:32.722Z,1428005972.722 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:19:32.736Z,1428005972.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:19:33.130Z,1428005973.130 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:19:33.591Z,1428005973.591 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:19:34.016Z,1428005974.016 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:19:34.449Z,1428005974.449 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:19:34.877Z,1428005974.877 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:19:35.307Z,1428005975.307 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:19:35.714Z,1428005975.714 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:19:36.147Z,1428005976.147 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:19:36.565Z,1428005976.565 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:19:36.634Z,1428005976.634 [Startup:StartupSatComms:A](INFO): Timed out from 2015-04-02T20:18:36.3Z
2015-04-02T20:19:36.634Z,1428005976.634 [Startup:StartupSatComms:A] Stopped
2015-04-02T20:19:36.634Z,1428005976.634 [Startup:StartupSatComms:B] Running Loop=1
2015-04-02T20:19:37.023Z,1428005977.023 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:19:37.058Z,1428005977.058 [Startup:StartupSatComms:B](DEBUG): Initialize ReadDataComponent to sense platform_communications
2015-04-02T20:19:37.654Z,1428005977.654 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:19:38.110Z,1428005978.110 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:19:38.531Z,1428005978.531 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:19:38.985Z,1428005978.985 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:19:39.401Z,1428005979.401 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:19:39.853Z,1428005979.853 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:19:40.266Z,1428005980.266 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:19:40.364Z,1428005980.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:19:40.750Z,1428005980.750 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:19:40.805Z,1428005980.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:19:41.203Z,1428005981.203 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:19:41.633Z,1428005981.633 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:19:42.044Z,1428005982.044 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:19:42.473Z,1428005982.473 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:19:42.894Z,1428005982.894 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:19:43.322Z,1428005983.322 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:19:43.739Z,1428005983.739 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:19:44.172Z,1428005984.172 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:19:44.590Z,1428005984.590 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:19:45.013Z,1428005985.013 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:19:45.426Z,1428005985.426 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:19:45.866Z,1428005985.866 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:19:46.327Z,1428005986.327 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:19:46.768Z,1428005986.768 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:19:47.176Z,1428005987.176 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:19:47.613Z,1428005987.613 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:19:48.026Z,1428005988.026 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:19:48.454Z,1428005988.454 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:19:48.896Z,1428005988.896 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:19:49.324Z,1428005989.324 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:19:49.749Z,1428005989.749 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:19:50.177Z,1428005990.177 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:19:50.586Z,1428005990.586 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:19:51.014Z,1428005991.014 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:19:51.435Z,1428005991.435 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:19:51.876Z,1428005991.876 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:19:52.288Z,1428005992.288 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:19:52.761Z,1428005992.761 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:19:53.174Z,1428005993.174 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:19:53.619Z,1428005993.619 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:19:54.071Z,1428005994.071 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:19:54.505Z,1428005994.505 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:19:54.916Z,1428005994.916 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:19:55.329Z,1428005995.329 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:19:55.737Z,1428005995.737 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:19:56.178Z,1428005996.178 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:19:56.591Z,1428005996.591 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:19:57.028Z,1428005997.028 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:19:57.461Z,1428005997.461 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:19:57.911Z,1428005997.911 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:19:58.318Z,1428005998.318 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:19:58.345Z,1428005998.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:19:58.759Z,1428005998.759 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:19:58.773Z,1428005998.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:19:59.167Z,1428005999.167 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:19:59.596Z,1428005999.596 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:20:00.017Z,1428006000.017 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:20:00.042Z,1428006000.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:20:00.437Z,1428006000.437 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:20:00.450Z,1428006000.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:20:00.850Z,1428006000.850 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:20:01.286Z,1428006001.286 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:20:01.731Z,1428006001.731 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:20:02.188Z,1428006002.188 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:20:02.601Z,1428006002.601 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:20:03.037Z,1428006003.037 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:20:03.450Z,1428006003.450 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:20:03.890Z,1428006003.890 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:20:04.299Z,1428006004.299 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:20:04.784Z,1428006004.784 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:20:05.196Z,1428006005.196 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:20:05.645Z,1428006005.645 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:20:06.079Z,1428006006.079 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:20:06.546Z,1428006006.546 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:20:06.963Z,1428006006.963 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:20:07.464Z,1428006007.464 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:20:07.888Z,1428006007.888 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:20:08.313Z,1428006008.313 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:20:08.735Z,1428006008.735 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:20:09.154Z,1428006009.154 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:20:09.567Z,1428006009.567 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:20:10.004Z,1428006010.004 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:20:10.413Z,1428006010.413 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:20:10.849Z,1428006010.849 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:20:11.266Z,1428006011.266 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:20:11.702Z,1428006011.702 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:20:12.115Z,1428006012.115 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:20:12.552Z,1428006012.552 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:20:12.952Z,1428006012.952 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:20:13.386Z,1428006013.386 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:20:13.798Z,1428006013.798 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:20:14.222Z,1428006014.222 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:20:14.644Z,1428006014.644 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:20:15.064Z,1428006015.064 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:20:15.473Z,1428006015.473 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:20:15.921Z,1428006015.921 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:20:16.361Z,1428006016.361 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:20:16.786Z,1428006016.786 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:20:17.207Z,1428006017.207 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:20:17.635Z,1428006017.635 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:20:18.112Z,1428006018.112 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:20:18.573Z,1428006018.573 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:20:19.026Z,1428006019.026 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:20:19.460Z,1428006019.460 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:20:19.915Z,1428006019.915 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:20:20.368Z,1428006020.368 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:20:20.780Z,1428006020.780 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:20:21.209Z,1428006021.209 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:20:21.630Z,1428006021.630 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:20:21.656Z,1428006021.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:20:22.046Z,1428006022.046 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:20:22.060Z,1428006022.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:20:22.455Z,1428006022.455 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:20:22.500Z,1428006022.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 2 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:20:22.904Z,1428006022.904 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:20:22.917Z,1428006022.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 3 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:20:23.312Z,1428006023.312 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:20:23.351Z,1428006023.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 4 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:20:23.749Z,1428006023.749 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:20:23.763Z,1428006023.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 5 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:20:24.158Z,1428006024.158 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:20:24.570Z,1428006024.570 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:20:25.003Z,1428006025.003 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:20:25.420Z,1428006025.420 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:20:25.454Z,1428006025.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:20:25.856Z,1428006025.856 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:20:25.870Z,1428006025.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:20:26.273Z,1428006026.273 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:20:26.343Z,1428006026.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 2 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:20:26.345Z,1428006026.345 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-04-02T20:20:26.345Z,1428006026.345 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 1
2015-04-02T20:20:26.345Z,1428006026.345 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2015-04-02T20:20:26.351Z,1428006026.351 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-04-02T20:20:26.351Z,1428006026.351 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 1
2015-04-02T20:20:26.351Z,1428006026.351 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2015-04-02T20:20:26.379Z,1428006026.379 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2015-04-02T20:20:26.379Z,1428006026.379 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2015-04-02T20:20:26.730Z,1428006026.730 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:20:26.782Z,1428006026.782 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2015-04-02T20:20:26.782Z,1428006026.782 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 1
2015-04-02T20:20:26.782Z,1428006026.782 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2015-04-02T20:20:26.782Z,1428006026.782 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 1
2015-04-02T20:20:27.170Z,1428006027.170 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:20:27.219Z,1428006027.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2015-04-02T20:20:27.220Z,1428006027.220 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2015-04-02T20:20:27.614Z,1428006027.614 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:20:27.627Z,1428006027.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:20:28.028Z,1428006028.028 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:20:28.105Z,1428006028.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:20:28.510Z,1428006028.510 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:20:28.524Z,1428006028.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 2 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:20:28.917Z,1428006028.917 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:20:28.929Z,1428006028.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 3 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:20:29.334Z,1428006029.334 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:20:29.803Z,1428006029.803 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:20:30.231Z,1428006030.231 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:20:30.306Z,1428006030.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:20:30.700Z,1428006030.700 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:20:30.747Z,1428006030.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:20:31.152Z,1428006031.152 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:20:31.223Z,1428006031.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 2 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:20:31.605Z,1428006031.605 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:20:31.629Z,1428006031.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 3 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:20:32.034Z,1428006032.034 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:20:32.495Z,1428006032.495 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:20:32.900Z,1428006032.900 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:20:32.982Z,1428006032.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:20:33.376Z,1428006033.376 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:20:33.430Z,1428006033.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:20:33.836Z,1428006033.836 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:20:34.279Z,1428006034.279 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:20:34.694Z,1428006034.694 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:20:34.752Z,1428006034.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:20:35.151Z,1428006035.151 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:20:35.191Z,1428006035.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:20:35.603Z,1428006035.603 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:20:36.060Z,1428006036.060 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:20:36.505Z,1428006036.505 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:20:36.575Z,1428006036.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:20:36.961Z,1428006036.961 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:20:37.002Z,1428006037.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:20:37.006Z,1428006037.006 [Startup:StartupSatComms:B](INFO): Timed out from 2015-04-02T20:19:36.6Z
2015-04-02T20:20:37.006Z,1428006037.006 [Startup:StartupSatComms:B] Stopped
2015-04-02T20:20:37.006Z,1428006037.006 [Startup:StartupSatComms](INFO): Completed Startup:StartupSatComms
2015-04-02T20:20:37.006Z,1428006037.006 [Startup:StartupSatComms] Stopped
2015-04-02T20:20:37.006Z,1428006037.006 [Startup:StartupSatComms](INFO): Aggregate::uninitialize Startup:StartupSatComms
2015-04-02T20:20:37.008Z,1428006037.008 [Startup](INFO): Completed Startup
2015-04-02T20:20:37.008Z,1428006037.008 [Startup] Stopped
2015-04-02T20:20:37.008Z,1428006037.008 [Startup](INFO): Aggregate::uninitialize Startup
2015-04-02T20:20:37.008Z,1428006037.008 [Startup:A.GoToSurface] Stopped
2015-04-02T20:20:37.008Z,1428006037.008 [Startup:A.GoToSurface](DEBUG): Uninitialize GoToSurfaceComponent.
2015-04-02T20:20:37.403Z,1428006037.403 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:20:37.431Z,1428006037.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 2 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:20:37.434Z,1428006037.434 [MissionManager](IMPORTANT): Started mission Default
2015-04-02T20:20:37.434Z,1428006037.434 [Default] Running Loop=1
2015-04-02T20:20:37.434Z,1428006037.434 [Default](INFO): Aggregate::initialize Default
2015-04-02T20:20:37.435Z,1428006037.435 [Default:B.GoToSurface] Running Loop=1
2015-04-02T20:20:37.435Z,1428006037.435 [Default:B.GoToSurface](DEBUG): Initialize GoToSurfaceComponent.
2015-04-02T20:20:37.435Z,1428006037.435 [Default:B.GoToSurface](DEBUG): No depth rate setting specified. Using default value of nan m/s.
2015-04-02T20:20:37.435Z,1428006037.435 [Default:B.GoToSurface](DEBUG): No pitch setting specified. Using default value of nan degrees.
2015-04-02T20:20:37.436Z,1428006037.436 [Default:B.GoToSurface](DEBUG): No speed setting specified. Using default value of 0.500000 m/s.
2015-04-02T20:20:37.436Z,1428006037.436 [Default:StartClock] Running Loop=1
2015-04-02T20:20:37.436Z,1428006037.436 [Default:StartClock](INFO): Aggregate::initialize Default:StartClock
2015-04-02T20:20:37.436Z,1428006037.436 [Default:StartClock:A] Running Loop=1
2015-04-02T20:20:37.437Z,1428006037.437 [Default:CheckIn] Running Loop=1
2015-04-02T20:20:37.437Z,1428006037.437 [Default:CheckIn](INFO): Aggregate::initialize Default:CheckIn
2015-04-02T20:20:37.437Z,1428006037.437 [Default:CheckIn:A.SetSpeed] Running Loop=1
2015-04-02T20:20:37.437Z,1428006037.437 [Default:CheckIn:A.SetSpeed](DEBUG): Initialize.
2015-04-02T20:20:37.437Z,1428006037.437 [Default:CheckIn:Read_GPS] Running Loop=1
2015-04-02T20:20:37.438Z,1428006037.438 [Default:CheckIn:Read_GPS](DEBUG): Initialize ReadDataComponent to sense latitude_fix
2015-04-02T20:20:37.456Z,1428006037.456 [Default:CheckIn:A.SetSpeed] Running Loop=1
2015-04-02T20:20:37.486Z,1428006037.486 [Default:StartClock:A] Stopped
2015-04-02T20:20:37.486Z,1428006037.486 [Default:StartClock](INFO): Completed Default:StartClock
2015-04-02T20:20:37.487Z,1428006037.487 [Default:StartClock] Stopped
2015-04-02T20:20:37.487Z,1428006037.487 [Default:StartClock](INFO): Aggregate::uninitialize Default:StartClock
2015-04-02T20:20:37.856Z,1428006037.856 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:20:37.869Z,1428006037.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 3 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:20:37.874Z,1428006037.874 [Default:WaitAtTheSurface] Running Loop=1
2015-04-02T20:20:37.874Z,1428006037.874 [Default:WaitAtTheSurface](INFO): Aggregate::initialize Default:WaitAtTheSurface
2015-04-02T20:20:37.874Z,1428006037.874 [Default:WaitAtTheSurface:RunApplicationAtLowSpeed.SetSpeed] Running Loop=1
2015-04-02T20:20:37.874Z,1428006037.874 [Default:WaitAtTheSurface:RunApplicationAtLowSpeed.SetSpeed](DEBUG): Initialize.
2015-04-02T20:20:38.275Z,1428006038.275 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:20:38.320Z,1428006038.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 4 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:20:38.327Z,1428006038.327 [Default:WaitAtTheSurface:RunApplicationAtLowSpeed.SetSpeed] Running Loop=1
2015-04-02T20:20:38.720Z,1428006038.720 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:20:38.734Z,1428006038.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 5 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:20:39.133Z,1428006039.133 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:20:39.585Z,1428006039.585 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:20:40.014Z,1428006040.014 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:20:40.435Z,1428006040.435 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:20:40.520Z,1428006040.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:20:40.929Z,1428006040.929 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:20:40.984Z,1428006040.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:20:41.380Z,1428006041.380 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:20:41.410Z,1428006041.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 2 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:20:41.817Z,1428006041.817 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:20:41.842Z,1428006041.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 3 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:20:42.238Z,1428006042.238 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:20:42.266Z,1428006042.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 4 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:20:42.670Z,1428006042.670 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:20:42.696Z,1428006042.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 5 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:20:43.095Z,1428006043.095 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:20:43.503Z,1428006043.503 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:20:43.972Z,1428006043.972 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:20:44.381Z,1428006044.381 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:20:44.455Z,1428006044.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:20:44.847Z,1428006044.847 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:20:44.880Z,1428006044.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:20:45.278Z,1428006045.278 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:20:45.337Z,1428006045.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 2 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:20:45.727Z,1428006045.727 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:20:45.803Z,1428006045.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 3 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:20:46.208Z,1428006046.208 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:20:46.236Z,1428006046.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 4 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:20:46.639Z,1428006046.639 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:20:46.680Z,1428006046.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 5 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:20:47.077Z,1428006047.077 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:20:47.563Z,1428006047.563 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:20:47.983Z,1428006047.983 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:20:48.391Z,1428006048.391 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:20:48.848Z,1428006048.848 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:20:49.270Z,1428006049.270 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:20:49.693Z,1428006049.693 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:20:50.138Z,1428006050.138 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:20:50.591Z,1428006050.591 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:20:50.995Z,1428006050.995 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:20:51.440Z,1428006051.440 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:20:51.849Z,1428006051.849 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:20:52.305Z,1428006052.305 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:20:52.734Z,1428006052.734 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:20:52.760Z,1428006052.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:20:53.163Z,1428006053.163 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:20:53.188Z,1428006053.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:20:53.587Z,1428006053.587 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:20:54.020Z,1428006054.020 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:20:54.437Z,1428006054.437 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:20:54.869Z,1428006054.869 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:20:55.286Z,1428006055.286 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:20:55.312Z,1428006055.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:20:55.731Z,1428006055.731 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:20:55.745Z,1428006055.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:20:56.151Z,1428006056.151 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:20:56.211Z,1428006056.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 2 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:20:56.600Z,1428006056.600 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:20:56.614Z,1428006056.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 3 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:20:57.021Z,1428006057.021 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:20:57.059Z,1428006057.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 4 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:20:57.461Z,1428006057.461 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:20:57.508Z,1428006057.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 5 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:20:57.902Z,1428006057.902 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:20:58.339Z,1428006058.339 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:20:58.763Z,1428006058.763 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:20:59.216Z,1428006059.216 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:20:59.633Z,1428006059.633 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:21:00.081Z,1428006060.081 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:21:00.542Z,1428006060.542 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:21:00.596Z,1428006060.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:21:00.991Z,1428006060.991 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:21:01.054Z,1428006061.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:21:01.451Z,1428006061.451 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:21:01.921Z,1428006061.921 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:21:02.345Z,1428006062.345 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:21:02.793Z,1428006062.793 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:21:03.210Z,1428006063.210 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:21:03.244Z,1428006063.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:21:03.638Z,1428006063.638 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:21:03.651Z,1428006063.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:21:04.059Z,1428006064.059 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:21:04.504Z,1428006064.504 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:21:04.922Z,1428006064.922 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:21:04.948Z,1428006064.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:21:05.345Z,1428006065.345 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:21:05.359Z,1428006065.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:21:05.762Z,1428006065.762 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:21:06.199Z,1428006066.199 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:21:06.604Z,1428006066.604 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:21:07.039Z,1428006067.039 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:21:07.449Z,1428006067.449 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:21:07.891Z,1428006067.891 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:21:08.298Z,1428006068.298 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:21:08.731Z,1428006068.731 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:21:09.155Z,1428006069.155 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:21:09.588Z,1428006069.588 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:21:10.013Z,1428006070.013 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:21:10.469Z,1428006070.469 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:21:10.902Z,1428006070.902 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:21:11.331Z,1428006071.331 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:21:11.752Z,1428006071.752 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:21:12.177Z,1428006072.177 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:21:12.613Z,1428006072.613 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:21:12.640Z,1428006072.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:21:13.042Z,1428006073.042 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:21:13.075Z,1428006073.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:21:13.470Z,1428006073.470 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:21:13.935Z,1428006073.935 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:21:14.343Z,1428006074.343 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:21:14.399Z,1428006074.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:21:14.800Z,1428006074.800 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:21:14.851Z,1428006074.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:21:15.257Z,1428006075.257 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:21:15.693Z,1428006075.693 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:21:16.142Z,1428006076.142 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:21:16.210Z,1428006076.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:21:16.611Z,1428006076.611 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:21:16.635Z,1428006076.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:21:19.877Z,1428006079.877 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:21:19.975Z,1428006079.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 2 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:21:20.378Z,1428006080.378 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:21:20.405Z,1428006080.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 3 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:21:20.801Z,1428006080.801 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:21:21.247Z,1428006081.247 [DataOverHttps](INFO): setting available, lastComms_.elapsed()=0.003706
2015-04-02T20:21:21.254Z,1428006081.254 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:21:21.671Z,1428006081.671 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:21:22.103Z,1428006082.103 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:21:22.516Z,1428006082.516 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:21:22.957Z,1428006082.957 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:21:23.402Z,1428006083.402 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:21:23.862Z,1428006083.862 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:21:24.288Z,1428006084.288 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:21:24.708Z,1428006084.708 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:21:25.116Z,1428006085.116 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:21:25.562Z,1428006085.562 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:21:25.973Z,1428006085.973 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:21:26.422Z,1428006086.422 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:21:26.871Z,1428006086.871 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:21:26.915Z,1428006086.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:21:27.316Z,1428006087.316 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:21:27.362Z,1428006087.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:21:27.748Z,1428006087.748 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:21:28.201Z,1428006088.201 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:21:28.621Z,1428006088.621 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:21:29.126Z,1428006089.126 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:21:29.543Z,1428006089.543 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:21:29.984Z,1428006089.984 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:21:30.426Z,1428006090.426 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:21:30.861Z,1428006090.861 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:21:31.313Z,1428006091.313 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:21:31.398Z,1428006091.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:21:31.791Z,1428006091.791 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:21:31.805Z,1428006091.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:21:32.199Z,1428006092.199 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:21:32.664Z,1428006092.664 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:21:33.096Z,1428006093.096 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:21:33.167Z,1428006093.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:21:33.561Z,1428006093.561 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:21:33.603Z,1428006093.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:21:34.010Z,1428006094.010 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:21:34.452Z,1428006094.452 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:21:34.871Z,1428006094.871 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:21:34.908Z,1428006094.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:21:35.316Z,1428006095.316 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:21:35.330Z,1428006095.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:21:35.737Z,1428006095.737 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:21:36.177Z,1428006096.177 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:21:36.586Z,1428006096.586 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:21:36.622Z,1428006096.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:21:37.035Z,1428006097.035 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:21:37.064Z,1428006097.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:21:37.452Z,1428006097.452 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:21:37.900Z,1428006097.900 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:21:38.345Z,1428006098.345 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:21:38.781Z,1428006098.781 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:21:39.190Z,1428006099.190 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:21:39.631Z,1428006099.631 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:21:40.060Z,1428006100.060 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:21:40.086Z,1428006100.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:21:40.488Z,1428006100.488 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:21:40.530Z,1428006100.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:21:40.941Z,1428006100.941 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:21:41.381Z,1428006101.381 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:21:41.790Z,1428006101.790 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:21:42.203Z,1428006102.203 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:21:42.611Z,1428006102.611 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:21:42.693Z,1428006102.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:21:43.072Z,1428006103.072 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:21:43.145Z,1428006103.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:21:43.521Z,1428006103.521 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:21:43.954Z,1428006103.954 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:21:44.366Z,1428006104.366 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:21:44.448Z,1428006104.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:21:44.823Z,1428006104.823 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:21:44.846Z,1428006104.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:21:45.243Z,1428006105.243 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:21:45.704Z,1428006105.704 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:21:46.148Z,1428006106.148 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:21:46.174Z,1428006106.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:21:46.599Z,1428006106.599 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:21:46.614Z,1428006106.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:21:47.018Z,1428006107.018 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:21:47.449Z,1428006107.449 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:21:47.871Z,1428006107.871 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:21:47.919Z,1428006107.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:21:48.312Z,1428006108.312 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:21:48.325Z,1428006108.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:21:48.725Z,1428006108.725 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:21:49.165Z,1428006109.165 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:21:49.590Z,1428006109.590 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:21:50.035Z,1428006110.035 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:21:50.443Z,1428006110.443 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:21:50.498Z,1428006110.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:21:50.888Z,1428006110.888 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:21:50.901Z,1428006110.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:21:51.297Z,1428006111.297 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:21:51.753Z,1428006111.753 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:21:52.178Z,1428006112.178 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:21:52.206Z,1428006112.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:21:52.624Z,1428006112.624 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:21:52.639Z,1428006112.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:21:53.043Z,1428006113.043 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:21:53.116Z,1428006113.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 2 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:21:53.504Z,1428006113.504 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:21:53.546Z,1428006113.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 3 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:21:53.941Z,1428006113.941 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:21:54.413Z,1428006114.413 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:21:54.846Z,1428006114.846 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:21:55.280Z,1428006115.280 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:21:55.700Z,1428006115.700 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:21:56.134Z,1428006116.134 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:21:59.391Z,1428006119.391 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:21:59.874Z,1428006119.874 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:22:00.298Z,1428006120.298 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:22:00.764Z,1428006120.764 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:22:01.173Z,1428006121.173 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:22:01.649Z,1428006121.649 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:22:02.102Z,1428006122.102 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:22:02.562Z,1428006122.562 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:22:02.979Z,1428006122.979 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:22:03.416Z,1428006123.416 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:22:03.828Z,1428006123.828 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:22:04.269Z,1428006124.269 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:22:04.695Z,1428006124.695 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:22:05.115Z,1428006125.115 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:22:05.519Z,1428006125.519 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:22:05.949Z,1428006125.949 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:22:06.380Z,1428006126.380 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:22:06.435Z,1428006126.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:22:06.837Z,1428006126.837 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:22:06.863Z,1428006126.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:22:07.254Z,1428006127.254 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:22:07.674Z,1428006127.674 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:22:08.087Z,1428006128.087 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:22:08.125Z,1428006128.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:22:08.528Z,1428006128.528 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:22:08.541Z,1428006128.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:22:08.940Z,1428006128.940 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:22:08.978Z,1428006128.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 2 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:22:09.377Z,1428006129.377 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:22:09.391Z,1428006129.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 3 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:22:09.793Z,1428006129.793 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:22:09.833Z,1428006129.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 4 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:22:10.246Z,1428006130.246 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:22:10.274Z,1428006130.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 5 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:22:10.660Z,1428006130.660 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:22:11.091Z,1428006131.091 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:22:11.508Z,1428006131.508 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:22:11.543Z,1428006131.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:22:11.945Z,1428006131.945 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:22:11.959Z,1428006131.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:22:12.357Z,1428006132.357 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:22:12.397Z,1428006132.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 2 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:22:12.798Z,1428006132.798 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:22:12.811Z,1428006132.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 3 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:22:13.215Z,1428006133.215 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:22:13.659Z,1428006133.659 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:22:14.100Z,1428006134.100 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:22:14.533Z,1428006134.533 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:22:14.957Z,1428006134.957 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:22:15.044Z,1428006135.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:22:15.434Z,1428006135.434 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:22:15.462Z,1428006135.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:22:15.855Z,1428006135.855 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:22:16.266Z,1428006136.266 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:22:16.676Z,1428006136.676 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:22:16.711Z,1428006136.711 [BPC1](ERROR): Failed to receive battery data
2015-04-02T20:22:16.712Z,1428006136.712 [BPC1] Communications Fault, FailCount= 1
2015-04-02T20:22:16.712Z,1428006136.712 [BPC1](ERROR): Communications Fault
2015-04-02T20:22:16.748Z,1428006136.748 [CBIT](ERROR): Communications Fault in component: BPC1
2015-04-02T20:22:17.130Z,1428006137.130 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:22:17.536Z,1428006137.536 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:22:17.971Z,1428006137.971 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:22:17.997Z,1428006137.997 [CBIT](INFO): Clearing failed state for component BPC1
2015-04-02T20:22:17.997Z,1428006137.997 [BPC1] No Fault, FailCount= 1
2015-04-02T20:22:18.386Z,1428006138.386 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:22:18.491Z,1428006138.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:22:18.883Z,1428006138.883 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:22:18.966Z,1428006138.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:22:19.352Z,1428006139.352 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:22:19.813Z,1428006139.813 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:22:20.230Z,1428006140.230 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:22:20.646Z,1428006140.646 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:22:21.059Z,1428006141.059 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:22:21.496Z,1428006141.496 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:22:21.908Z,1428006141.908 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:22:22.345Z,1428006142.345 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:22:22.758Z,1428006142.758 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:22:22.795Z,1428006142.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:22:23.194Z,1428006143.194 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:22:23.224Z,1428006143.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:22:23.636Z,1428006143.636 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:22:24.076Z,1428006144.076 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:22:24.509Z,1428006144.509 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:22:24.946Z,1428006144.946 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:22:25.358Z,1428006145.358 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:22:25.796Z,1428006145.796 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:22:26.215Z,1428006146.215 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:22:26.274Z,1428006146.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:22:26.664Z,1428006146.664 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:22:26.678Z,1428006146.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:22:26.682Z,1428006146.682 [Default:UpdateAndReportMinutesSinceMissionStarted] Running Loop=1
2015-04-02T20:22:26.682Z,1428006146.682 [Default:UpdateAndReportMinutesSinceMissionStarted](INFO): Aggregate::initialize Default:UpdateAndReportMinutesSinceMissionStarted
2015-04-02T20:22:26.682Z,1428006146.682 [Default:UpdateAndReportMinutesSinceMissionStarted:A] Running Loop=1
2015-04-02T20:22:26.684Z,1428006146.684 [Default:UpdateAndReportMinutesSinceMissionStarted:A] Stopped
2015-04-02T20:22:26.684Z,1428006146.684 [Default:UpdateAndReportMinutesSinceMissionStarted:B] Running Loop=1
2015-04-02T20:22:27.076Z,1428006147.076 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:22:27.135Z,1428006147.135 [Default:UpdateAndReportMinutesSinceMissionStarted:B](IMPORTANT): Default mission has been running for 1.821345 min 
2015-04-02T20:22:27.137Z,1428006147.137 [Default:UpdateAndReportMinutesSinceMissionStarted:B] Stopped
2015-04-02T20:22:27.137Z,1428006147.137 [Default:UpdateAndReportMinutesSinceMissionStarted](INFO): Completed Default:UpdateAndReportMinutesSinceMissionStarted
2015-04-02T20:22:27.137Z,1428006147.137 [Default:UpdateAndReportMinutesSinceMissionStarted] Stopped
2015-04-02T20:22:27.137Z,1428006147.137 [Default:UpdateAndReportMinutesSinceMissionStarted](INFO): Aggregate::uninitialize Default:UpdateAndReportMinutesSinceMissionStarted
2015-04-02T20:22:27.529Z,1428006147.529 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:22:27.970Z,1428006147.970 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:22:28.036Z,1428006148.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:22:28.434Z,1428006148.434 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:22:28.448Z,1428006148.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:22:28.843Z,1428006148.843 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:22:29.280Z,1428006149.280 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:22:29.700Z,1428006149.700 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:22:30.141Z,1428006150.141 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:22:30.550Z,1428006150.550 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:22:30.990Z,1428006150.990 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:22:31.439Z,1428006151.439 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:22:31.875Z,1428006151.875 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:22:32.312Z,1428006152.312 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:22:32.753Z,1428006152.753 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:22:33.198Z,1428006153.198 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:22:33.622Z,1428006153.622 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:22:34.059Z,1428006154.059 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:22:34.143Z,1428006154.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:22:34.548Z,1428006154.548 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:22:34.562Z,1428006154.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:22:34.964Z,1428006154.964 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:22:35.022Z,1428006155.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 2 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:22:35.425Z,1428006155.425 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:22:35.438Z,1428006155.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 3 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:22:35.838Z,1428006155.838 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:22:36.283Z,1428006156.283 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:22:36.719Z,1428006156.719 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:22:36.788Z,1428006156.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:22:37.176Z,1428006157.176 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:22:37.191Z,1428006157.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:22:37.585Z,1428006157.585 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:22:37.625Z,1428006157.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 2 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:22:38.033Z,1428006158.033 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:22:38.046Z,1428006158.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 3 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:22:38.446Z,1428006158.446 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:22:38.485Z,1428006158.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 4 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:22:38.887Z,1428006158.887 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:22:38.901Z,1428006158.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 5 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:22:39.295Z,1428006159.295 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:22:39.732Z,1428006159.732 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:22:40.140Z,1428006160.140 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:22:40.585Z,1428006160.585 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:22:41.010Z,1428006161.010 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:22:41.462Z,1428006161.462 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:22:41.880Z,1428006161.880 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:22:41.908Z,1428006161.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:22:42.316Z,1428006162.316 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:22:42.345Z,1428006162.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:22:42.737Z,1428006162.737 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:22:43.166Z,1428006163.166 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:22:43.578Z,1428006163.578 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:22:44.006Z,1428006164.006 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:22:44.009Z,1428006164.009 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2015-04-02T20:22:44.427Z,1428006164.427 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:22:44.872Z,1428006164.872 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:22:45.309Z,1428006165.309 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:22:45.328Z,1428006165.328 [NAL9602](INFO): GPS fix at 20150402T202219: (36.802750, -121.788079)
2015-04-02T20:22:45.367Z,1428006165.367 [Default:CheckIn:Read_GPS] Stopped
2015-04-02T20:22:45.367Z,1428006165.367 [Default:CheckIn:Read_Iridium] Running Loop=1
2015-04-02T20:22:45.765Z,1428006165.765 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:22:45.846Z,1428006165.846 [Default:CheckIn:Read_Iridium](DEBUG): Initialize ReadDataComponent to sense platform_communications
2015-04-02T20:22:46.560Z,1428006166.560 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:22:47.083Z,1428006167.083 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:22:52.664Z,1428006172.664 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:22:53.194Z,1428006173.194 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20150402T172534/Courier0088.lzma
2015-04-02T20:22:53.204Z,1428006173.204 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:22:53.629Z,1428006173.629 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:22:53.722Z,1428006173.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:22:54.136Z,1428006174.136 [DataOverHttps](INFO): Moved sent file to Logs/20150402T172534/Courier0088.lzma.bak
2015-04-02T20:22:54.136Z,1428006174.136 [DataOverHttps](INFO): SBD MOMSN=3101078
2015-04-02T20:22:54.146Z,1428006174.146 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:22:54.159Z,1428006174.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:22:54.611Z,1428006174.611 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:22:54.718Z,1428006174.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 2 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:22:55.128Z,1428006175.128 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:22:55.150Z,1428006175.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 3 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:22:58.704Z,1428006178.704 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:22:58.728Z,1428006178.728 [NAL9602](INFO): Powering down
2015-04-02T20:22:58.762Z,1428006178.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 4 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:22:59.190Z,1428006179.190 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:22:59.212Z,1428006179.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 5 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:22:59.622Z,1428006179.622 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:23:00.081Z,1428006180.081 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:23:00.524Z,1428006180.524 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:23:01.002Z,1428006181.002 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:23:05.113Z,1428006185.113 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:23:05.554Z,1428006185.554 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20150402T172534/Courier0092.lzma
2015-04-02T20:23:05.574Z,1428006185.574 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:23:05.582Z,1428006185.582 [BPC1](ERROR): A bank expecting battery number:1 and read number: uart read:X
$S,01,297A,02,00,04,4A%5C
$C1,01,FF,02,00,03,FF,04,00,05,00,06,00,07,00%72
$B11,0A,FFFD%31
$B12,0A,FFF6%40
$B13,0A,FF37%35
$B14,0A,0000%36
$B15,0A,0000%37
$B16,0A,0000%34
$B17,0A,0000%35
$B18,0A,0000%3A
$S,01,2948,02,00,04,4A%26
$C1,01,FF,02,00,03,FF,04,00,05,00,06,00,07,00%72
$B11,02,000A,01,02A8,03,0001,08,0B53,09,3CA0,0A,FFFD,0B,FFFF%3C
$B11,0C,0001,0D,004A,0E,0045,0F,123E,10,18F7,11,FFFF,12,FFFF%3C
$B11,13,FFFF,14,0BB8,15,41A0,16,00C0,17,0002,18,1A90,19,3840%3A
$B11,1A,0031,1B,458F,1C,0157%4D
$B12,02,000A,01,02A8,03,0001,08,0B4C,09,3CCE,0A,FFF6,0B,FFF7%3A
$B12,0C,0001,0D,004B,0E,0049,0F,132B,10,19A0,11,7302,12,7FC9%3B
$B12,13,FFFF,14,0BB8,15,41A0,16,00C0,17,0002,18,1A90,19,3840%39
$B12,1A,0031,1B,458C,1C,00F1%3F
$B13,02,000A,01,02A8,03,0001,08,0B53,09,3C93,0A,FF36,0B,FF39%48
$B13,0C,0001,0D,004C,0E,0047,0F,12C0,10,18FD,11,0592,12,05A7%35
$B13,13,FFFF,14,0BB8,15,41A0,16,00C0,17,0002,18,1A90,19,3840%38
$B13,1A,0031,1B,458B,1C,00BF%4C
$B14,02,000A,01,02A8,03,0001,08,0B3D,09,3C7C,0A,0000,0B,0000%4F
$B14,0C,0001,0D,0048,0E,0043,0F,11BE,10,18B6,11,FFFF,12,FFFF%31
$B14,13,FFFF,14,0BB8,15,41A0,16,00C0,17,0002,18,1A90,19,3840%3F
$B14,1A,0031,1B,458B,1C,0089%4E
$B15,02,000A,01,02A8,03,0001,08,0B3F,09,3C75,0A,0000,0B,0000%3A
$B15,0C,0001,0D,004B,0E,0048,0F,130F,10,199F,11,FFFF,12,FFFF%38
$B15,13,FFFF,14,0BB8,15,41A0,16,00C0,17,0002,18,1A90,19,3840%3E
$B15,1A,0031,1B,458C,1C,00C2%3E
$B16,02,000A,01,02A8,03,0001,08,0B4B,09,3C8D,0A,0000,0B,0000%44
$B16,0C,0001,0D,004A,0E,0047,0F,12B4,10,1994,11,FFFF,12,FFFF%44
$B16,13,FFFF,14,0BB8,15,41A0,16,00C0,17,0002,18,1A90,19,3840%3D
$B16,1A,0031,1B,458C,1C,00CA%4E
$B17,02,000A,01,02A8,03,0001,08,0B45,09,3C79,0A,0000,0B,0000%40
$B17,0C,0001,0D,0049,0E,0046,0F,126F,10,1988,11,FFFF,12,FFFF%37
$B17,13,FFFF,14,0BB8,15,41A0,16,00C0,17,0002,18,1A90,19,3840%3C
$B17,1A,0031,1B,458C,1C,011A%3C
$B18,02,000A,01,02A8,03,0001,08,0B39,09,3C1B,0A,0000,0B,0000%39
$B18,0C,0001,0D,0048,0E,0041,0F,1123,10,18D0,11,FFFF,12,FFFF%39
$B18,13,FFFF,14,0BB8,15,41A0,16,00C0,17,0003,18,1A90,19,3840%32
$B18,1A,0031,1B,458C,1C,00FD%40

2015-04-02T20:23:05.583Z,1428006185.583 [BPC1](ERROR): Failed to parse bank A battery data
2015-04-02T20:23:05.583Z,1428006185.583 [BPC1] Data Fault, FailCount= 1
2015-04-02T20:23:05.583Z,1428006185.583 [BPC1](ERROR): Data Fault
2015-04-02T20:23:05.605Z,1428006185.605 [CBIT](ERROR): Data Fault in component: BPC1
2015-04-02T20:23:06.032Z,1428006186.032 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:23:06.467Z,1428006186.467 [DataOverHttps](INFO): Moved sent file to Logs/20150402T172534/Courier0092.lzma.bak
2015-04-02T20:23:06.467Z,1428006186.467 [DataOverHttps](INFO): SBD MOMSN=3101080
2015-04-02T20:23:06.473Z,1428006186.473 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:23:07.010Z,1428006187.010 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:23:07.161Z,1428006187.161 [CBIT](INFO): Clearing failed state for component BPC1
2015-04-02T20:23:07.161Z,1428006187.161 [BPC1] No Fault, FailCount= 1
2015-04-02T20:23:07.555Z,1428006187.555 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:23:11.038Z,1428006191.038 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:23:11.513Z,1428006191.513 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:23:11.945Z,1428006191.945 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:23:12.406Z,1428006192.406 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:23:12.831Z,1428006192.831 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:23:13.275Z,1428006193.275 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:23:16.628Z,1428006196.628 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:23:17.073Z,1428006197.073 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:23:17.504Z,1428006197.504 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:23:17.964Z,1428006197.964 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:23:18.375Z,1428006198.375 [DataOverHttps](INFO): Sending 72 bytes from file Logs/20150402T201714/Courier0000.lzma
2015-04-02T20:23:18.387Z,1428006198.387 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:23:18.434Z,1428006198.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:23:18.861Z,1428006198.861 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:23:18.876Z,1428006198.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:23:19.290Z,1428006199.290 [DataOverHttps](INFO): Moved sent file to Logs/20150402T201714/Courier0000.lzma.bak
2015-04-02T20:23:19.291Z,1428006199.291 [DataOverHttps](INFO): SBD MOMSN=3101082
2015-04-02T20:23:19.301Z,1428006199.301 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:23:19.354Z,1428006199.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 2 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:23:19.847Z,1428006199.847 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:23:19.860Z,1428006199.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 3 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:23:20.288Z,1428006200.288 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:23:20.324Z,1428006200.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 4 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:23:20.741Z,1428006200.741 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:23:20.755Z,1428006200.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 5 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:23:24.093Z,1428006204.093 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:23:24.607Z,1428006204.607 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:23:25.038Z,1428006205.038 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:23:25.141Z,1428006205.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:23:25.532Z,1428006205.532 [DataOverHttps](IMPORTANT): SBD MTMSN=20150402T202300
2015-04-02T20:23:25.539Z,1428006205.539 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:23:25.553Z,1428006205.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:23:25.972Z,1428006205.972 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:23:26.050Z,1428006206.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 2 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:23:26.456Z,1428006206.456 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:23:26.500Z,1428006206.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 3 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:23:29.775Z,1428006209.775 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:23:30.222Z,1428006210.222 [DataOverHttps](INFO): Sending 212 bytes from file Logs/20150402T201714/Courier0004.lzma
2015-04-02T20:23:30.225Z,1428006210.225 [DataOverHttps](INFO): Received command:! ifconfig eth0
2015-04-02T20:23:30.244Z,1428006210.244 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:23:30.313Z,1428006210.313 [CommandLine](IMPORTANT): got command ! ifconfig eth0
2015-04-02T20:23:30.410Z,1428006210.410 [CommandLine](IMPORTANT): eth0      Link encap:Ethernet  HWaddr 00:50:C2:8C:E7:DA  
          inet addr:192.168.0.111  Bcast:192.168.0.255  Mask:255.255.255.0
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:94 errors:0 dropped:0 overruns:0 frame:0
          TX packets:146 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:38703 (37.7 Kb)  TX bytes:21694 (21.1 Kb)
          Interrupt:29 


2015-04-02T20:23:30.872Z,1428006210.872 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:23:31.325Z,1428006211.325 [DataOverHttps](INFO): Moved sent file to Logs/20150402T201714/Courier0004.lzma.bak
2015-04-02T20:23:31.325Z,1428006211.325 [DataOverHttps](INFO): SBD MOMSN=3101087
2015-04-02T20:23:31.332Z,1428006211.332 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:23:31.824Z,1428006211.824 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:23:32.263Z,1428006212.263 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:23:35.561Z,1428006215.561 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:23:36.015Z,1428006216.015 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:23:36.432Z,1428006216.432 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:23:36.884Z,1428006216.884 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:23:37.310Z,1428006217.310 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:23:37.786Z,1428006217.786 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:23:38.230Z,1428006218.230 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:23:38.711Z,1428006218.711 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:23:39.181Z,1428006219.181 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:23:39.211Z,1428006219.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:23:39.620Z,1428006219.620 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:23:39.645Z,1428006219.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:23:40.057Z,1428006220.057 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:23:40.554Z,1428006220.554 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:23:40.987Z,1428006220.987 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:23:41.495Z,1428006221.495 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:23:44.880Z,1428006224.880 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:23:45.309Z,1428006225.309 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20150402T201714/Courier0008.lzma
2015-04-02T20:23:45.317Z,1428006225.317 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:23:45.746Z,1428006225.746 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:23:46.172Z,1428006226.172 [DataOverHttps](INFO): Moved sent file to Logs/20150402T201714/Courier0008.lzma.bak
2015-04-02T20:23:46.172Z,1428006226.172 [DataOverHttps](INFO): SBD MOMSN=3101091
2015-04-02T20:23:46.197Z,1428006226.197 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:23:46.700Z,1428006226.700 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:23:47.144Z,1428006227.144 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:23:47.568Z,1428006227.568 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:23:47.615Z,1428006227.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:23:50.899Z,1428006230.899 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:23:50.912Z,1428006230.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:23:51.318Z,1428006231.318 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:23:51.375Z,1428006231.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 2 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:23:51.798Z,1428006231.798 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:23:51.811Z,1428006231.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 3 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:23:52.224Z,1428006232.224 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:23:52.279Z,1428006232.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 4 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:23:52.688Z,1428006232.688 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:23:52.711Z,1428006232.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 5 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:23:53.125Z,1428006233.125 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:23:56.603Z,1428006236.603 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:23:57.119Z,1428006237.119 [DataOverHttps](INFO): Sending 305 bytes from file Logs/20150402T172534/Express0085.lzma
2015-04-02T20:23:57.127Z,1428006237.127 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:23:57.563Z,1428006237.563 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:23:58.005Z,1428006238.005 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:23:58.462Z,1428006238.462 [DataOverHttps](INFO): Moved sent file to Logs/20150402T172534/Express0085.lzma.bak
2015-04-02T20:23:58.462Z,1428006238.462 [DataOverHttps](INFO): SBD MOMSN=3101093
2015-04-02T20:23:58.484Z,1428006238.484 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:23:58.552Z,1428006238.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:23:59.082Z,1428006239.082 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:23:59.128Z,1428006239.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:23:59.543Z,1428006239.543 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:24:02.904Z,1428006242.904 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:24:03.337Z,1428006243.337 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:24:03.395Z,1428006243.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:24:03.802Z,1428006243.802 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:24:03.815Z,1428006243.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:24:04.217Z,1428006244.217 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:24:04.298Z,1428006244.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 2 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:24:04.692Z,1428006244.692 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:24:04.710Z,1428006244.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 3 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:24:05.128Z,1428006245.128 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:24:05.171Z,1428006245.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 4 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:24:08.450Z,1428006248.450 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:24:08.463Z,1428006248.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 5 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:24:08.868Z,1428006248.868 [DataOverHttps](INFO): Sending 125 bytes from file Logs/20150402T172534/Express0089.lzma
2015-04-02T20:24:08.878Z,1428006248.878 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:24:09.312Z,1428006249.312 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:24:09.771Z,1428006249.771 [DataOverHttps](INFO): Moved sent file to Logs/20150402T172534/Express0089.lzma.bak
2015-04-02T20:24:09.771Z,1428006249.771 [DataOverHttps](INFO): SBD MOMSN=3101098
2015-04-02T20:24:09.783Z,1428006249.783 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:24:10.364Z,1428006250.364 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:24:10.464Z,1428006250.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:24:10.873Z,1428006250.873 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:24:10.886Z,1428006250.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:24:14.221Z,1428006254.221 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:24:14.731Z,1428006254.731 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:24:15.179Z,1428006255.179 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:24:15.676Z,1428006255.676 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:24:16.101Z,1428006256.101 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:24:16.580Z,1428006256.580 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:24:19.889Z,1428006259.889 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:24:19.958Z,1428006259.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:24:20.349Z,1428006260.349 [DataOverHttps](INFO): Sending 61 bytes from file Logs/20150402T172534/Express0093.lzma
2015-04-02T20:24:20.359Z,1428006260.359 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:24:20.386Z,1428006260.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:24:20.785Z,1428006260.785 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:24:21.236Z,1428006261.236 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:24:21.655Z,1428006261.655 [DataOverHttps](INFO): Moved sent file to Logs/20150402T172534/Express0093.lzma.bak
2015-04-02T20:24:21.656Z,1428006261.656 [DataOverHttps](INFO): SBD MOMSN=3101102
2015-04-02T20:24:21.670Z,1428006261.670 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:24:22.204Z,1428006262.204 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:24:22.640Z,1428006262.640 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:24:22.674Z,1428006262.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:24:25.952Z,1428006265.952 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:24:25.965Z,1428006265.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:24:26.373Z,1428006266.373 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:24:26.426Z,1428006266.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 2 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:24:26.842Z,1428006266.842 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:24:26.865Z,1428006266.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 3 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:24:27.282Z,1428006267.282 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:24:27.336Z,1428006267.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 4 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:24:27.756Z,1428006267.756 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:24:27.774Z,1428006267.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 5 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:24:28.187Z,1428006268.187 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:24:31.602Z,1428006271.602 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:24:32.066Z,1428006272.066 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:24:32.518Z,1428006272.518 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:24:32.972Z,1428006272.972 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:24:33.436Z,1428006273.436 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:24:33.528Z,1428006273.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:24:33.941Z,1428006273.941 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:24:33.954Z,1428006273.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:24:37.234Z,1428006277.234 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:24:37.684Z,1428006277.684 [DataOverHttps](INFO): Sending 587 bytes from file Logs/20150402T201714/Express0001.lzma
2015-04-02T20:24:37.694Z,1428006277.694 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:24:38.111Z,1428006278.111 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:24:38.153Z,1428006278.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:24:38.545Z,1428006278.545 [DataOverHttps](INFO): Moved sent file to Logs/20150402T201714/Express0001.lzma.bak
2015-04-02T20:24:38.545Z,1428006278.545 [DataOverHttps](INFO): SBD MOMSN=3101104
2015-04-02T20:24:38.556Z,1428006278.556 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:24:38.572Z,1428006278.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:24:39.056Z,1428006279.056 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:24:39.517Z,1428006279.517 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:24:42.826Z,1428006282.826 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:24:42.862Z,1428006282.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:24:43.296Z,1428006283.296 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:24:43.310Z,1428006283.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:24:43.716Z,1428006283.716 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:24:44.160Z,1428006284.160 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:24:44.597Z,1428006284.597 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:24:45.054Z,1428006285.054 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:24:45.096Z,1428006285.096 [BPC1](DEBUG): Received data from all battery sticks
2015-04-02T20:24:48.484Z,1428006288.484 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:24:48.953Z,1428006288.953 [DataOverHttps](INFO): Sending 495 bytes from file Logs/20150402T201714/Express0005.lzma
2015-04-02T20:24:48.959Z,1428006288.959 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:24:49.395Z,1428006289.395 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:24:49.827Z,1428006289.827 [DataOverHttps](INFO): Moved sent file to Logs/20150402T201714/Express0005.lzma.bak
2015-04-02T20:24:49.827Z,1428006289.827 [DataOverHttps](INFO): SBD MOMSN=3101116
2015-04-02T20:24:49.837Z,1428006289.837 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:24:50.384Z,1428006290.384 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:24:50.843Z,1428006290.843 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:24:54.164Z,1428006294.164 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:24:54.236Z,1428006294.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:24:54.654Z,1428006294.654 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:24:54.667Z,1428006294.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:24:55.073Z,1428006295.073 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:24:55.137Z,1428006295.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 2 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:24:55.551Z,1428006295.551 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:24:55.565Z,1428006295.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 3 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:24:55.967Z,1428006295.967 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:24:56.031Z,1428006296.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 4 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:24:56.443Z,1428006296.443 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:24:56.466Z,1428006296.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 5 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:24:59.906Z,1428006299.906 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:25:00.342Z,1428006300.342 [DataOverHttps](INFO): Sending 417 bytes from file Logs/20150402T201714/Express0009.lzma
2015-04-02T20:25:00.363Z,1428006300.363 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:25:00.794Z,1428006300.794 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:25:01.229Z,1428006301.229 [DataOverHttps](INFO): Moved sent file to Logs/20150402T201714/Express0009.lzma.bak
2015-04-02T20:25:01.229Z,1428006301.229 [DataOverHttps](IMPORTANT): SBD MOMSN=3101124, MTMSN=20150402T202436
2015-04-02T20:25:01.239Z,1428006301.239 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:25:01.739Z,1428006301.739 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:25:01.812Z,1428006301.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:25:01.827Z,1428006301.827 [Default:CheckIn:Read_Iridium] Stopped
2015-04-02T20:25:01.828Z,1428006301.828 [Default:CheckIn](INFO): Completed Default:CheckIn
2015-04-02T20:25:01.828Z,1428006301.828 [Default:CheckIn] Stopped
2015-04-02T20:25:01.828Z,1428006301.828 [Default:CheckIn](INFO): Aggregate::uninitialize Default:CheckIn
2015-04-02T20:25:01.828Z,1428006301.828 [Default:CheckIn:A.SetSpeed] Stopped
2015-04-02T20:25:01.828Z,1428006301.828 [Default:CheckIn:A.SetSpeed](DEBUG): Uninitialize.
2015-04-02T20:25:02.236Z,1428006302.236 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:25:02.249Z,1428006302.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:25:10.035Z,1428006310.035 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:25:12.181Z,1428006312.181 [DataOverHttps](INFO): Received command:! ifconfig
2015-04-02T20:25:12.192Z,1428006312.192 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:25:12.231Z,1428006312.231 [CommandLine](IMPORTANT): got command ! ifconfig
2015-04-02T20:25:12.351Z,1428006312.351 [CommandLine](IMPORTANT): eth0      Link encap:Ethernet  HWaddr 00:50:C2:8C:E7:DA  
          inet addr:192.168.0.111  Bcast:192.168.0.255  Mask:255.255.255.0
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:246 errors:0 dropped:0 overruns:0 frame:0
          TX packets:377 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:106093 (103.6 Kb)  TX bytes:54796 (53.5 Kb)
          Interrupt:29 

lo        Link encap:Local Loopback  
          inet addr:127.0.0.1  Mask:255.0.0.0
          UP LOOPBACK RUNNING  MTU:16436  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0 
          RX bytes:0 (0.0 b)  TX bytes:0 (0.0 b)


2015-04-02T20:25:17.195Z,1428006317.195 [Depth_Keller](ERROR): Pressure reading out of range: 1830.866943 decibar
2015-04-02T20:25:17.197Z,1428006317.197 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:25:17.385Z,1428006317.385 [Radio_Surface](INFO): Powering down
2015-04-02T20:25:22.200Z,1428006322.200 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:25:27.193Z,1428006327.193 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:25:32.199Z,1428006332.199 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:25:37.191Z,1428006337.191 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:25:42.191Z,1428006342.191 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:25:47.193Z,1428006347.193 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:25:52.198Z,1428006352.198 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:25:57.185Z,1428006357.185 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:26:02.194Z,1428006362.194 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:26:07.188Z,1428006367.188 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:26:12.201Z,1428006372.201 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:26:17.194Z,1428006377.194 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:26:22.200Z,1428006382.200 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:26:27.193Z,1428006387.193 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:26:32.184Z,1428006392.184 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2015-04-02T20:26:32.191Z,1428006392.191 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:26:37.187Z,1428006397.187 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:26:42.191Z,1428006402.191 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:26:47.187Z,1428006407.187 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:26:52.190Z,1428006412.190 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:26:57.186Z,1428006417.186 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:27:02.190Z,1428006422.190 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:27:07.189Z,1428006427.189 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:27:12.186Z,1428006432.186 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:27:17.190Z,1428006437.190 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:27:22.189Z,1428006442.189 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:27:27.188Z,1428006447.188 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:27:27.262Z,1428006447.262 [Default:UpdateAndReportMinutesSinceMissionStarted] Running Loop=1
2015-04-02T20:27:27.263Z,1428006447.263 [Default:UpdateAndReportMinutesSinceMissionStarted](INFO): Aggregate::initialize Default:UpdateAndReportMinutesSinceMissionStarted
2015-04-02T20:27:27.263Z,1428006447.263 [Default:UpdateAndReportMinutesSinceMissionStarted:A] Running Loop=1
2015-04-02T20:27:27.264Z,1428006447.264 [Default:UpdateAndReportMinutesSinceMissionStarted:A] Stopped
2015-04-02T20:27:27.264Z,1428006447.264 [Default:UpdateAndReportMinutesSinceMissionStarted:B] Running Loop=1
2015-04-02T20:27:27.435Z,1428006447.435 [CBIT](DEBUG): EFC running - data check-sum false
2015-04-02T20:27:32.189Z,1428006452.189 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:27:32.254Z,1428006452.254 [Default:UpdateAndReportMinutesSinceMissionStarted:B](IMPORTANT): Default mission has been running for 6.830520 min 
2015-04-02T20:27:32.255Z,1428006452.255 [Default:UpdateAndReportMinutesSinceMissionStarted:B] Stopped
2015-04-02T20:27:32.255Z,1428006452.255 [Default:UpdateAndReportMinutesSinceMissionStarted](INFO): Completed Default:UpdateAndReportMinutesSinceMissionStarted
2015-04-02T20:27:32.255Z,1428006452.255 [Default:UpdateAndReportMinutesSinceMissionStarted] Stopped
2015-04-02T20:27:32.255Z,1428006452.255 [Default:UpdateAndReportMinutesSinceMissionStarted](INFO): Aggregate::uninitialize Default:UpdateAndReportMinutesSinceMissionStarted
2015-04-02T20:27:37.185Z,1428006457.185 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2015-04-02T20:27:37.192Z,1428006457.192 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:27:42.187Z,1428006462.187 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:27:47.194Z,1428006467.194 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:27:52.196Z,1428006472.196 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:27:57.193Z,1428006477.193 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:28:02.197Z,1428006482.197 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:28:07.192Z,1428006487.192 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:28:12.197Z,1428006492.197 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:28:17.199Z,1428006497.199 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:28:22.196Z,1428006502.196 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:28:27.187Z,1428006507.187 [DataOverHttps](INFO): setting unavailable, lastComms_.elapsed()=184.997116
2015-04-02T20:28:27.204Z,1428006507.204 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:28:27.280Z,1428006507.280 [Default:CheckIn] Running Loop=1
2015-04-02T20:28:27.280Z,1428006507.280 [Default:CheckIn](INFO): Aggregate::initialize Default:CheckIn
2015-04-02T20:28:27.280Z,1428006507.280 [Default:CheckIn:A.SetSpeed] Running Loop=1
2015-04-02T20:28:27.280Z,1428006507.280 [Default:CheckIn:A.SetSpeed](DEBUG): Initialize.
2015-04-02T20:28:27.281Z,1428006507.281 [Default:CheckIn:Read_GPS] Running Loop=1
2015-04-02T20:28:27.806Z,1428006507.806 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:28:27.809Z,1428006507.809 [NAL9602](INFO): Powering up
2015-04-02T20:28:28.183Z,1428006508.183 [Radio_Surface](INFO): Powering up
2015-04-02T20:28:28.236Z,1428006508.236 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:28:28.813Z,1428006508.813 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:28:29.309Z,1428006509.309 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:28:30.139Z,1428006510.139 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:28:30.653Z,1428006510.653 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:28:31.216Z,1428006511.216 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:28:31.789Z,1428006511.789 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:28:31.832Z,1428006511.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:28:32.270Z,1428006512.270 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:28:32.283Z,1428006512.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:28:32.709Z,1428006512.709 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:28:33.171Z,1428006513.171 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:28:33.596Z,1428006513.596 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:28:34.065Z,1428006514.065 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:28:34.477Z,1428006514.477 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:28:34.942Z,1428006514.942 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:28:35.369Z,1428006515.369 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:28:35.828Z,1428006515.828 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:28:36.265Z,1428006516.265 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:28:36.714Z,1428006516.714 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:28:37.142Z,1428006517.142 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:28:37.602Z,1428006517.602 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:28:38.031Z,1428006518.031 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:28:38.488Z,1428006518.488 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:28:38.940Z,1428006518.940 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:28:38.977Z,1428006518.977 [NAL9602](INFO): NAL9602 initialized
2015-04-02T20:28:39.409Z,1428006519.409 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:28:39.846Z,1428006519.846 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:28:40.326Z,1428006520.326 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:28:40.783Z,1428006520.783 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:28:41.292Z,1428006521.292 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:28:41.729Z,1428006521.729 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:28:42.185Z,1428006522.185 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:28:42.625Z,1428006522.625 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:28:43.079Z,1428006523.079 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:28:43.559Z,1428006523.559 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:28:44.018Z,1428006524.018 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:28:44.445Z,1428006524.445 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:28:44.938Z,1428006524.938 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:28:45.398Z,1428006525.398 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:28:45.887Z,1428006525.887 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:28:46.352Z,1428006526.352 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:28:46.804Z,1428006526.804 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:28:47.245Z,1428006527.245 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:28:47.714Z,1428006527.714 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:28:48.155Z,1428006528.155 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:28:48.244Z,1428006528.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:28:48.668Z,1428006528.668 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:28:48.702Z,1428006528.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:28:49.097Z,1428006529.097 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:28:49.553Z,1428006529.553 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:28:49.974Z,1428006529.974 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:28:50.427Z,1428006530.427 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:28:50.867Z,1428006530.867 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:28:51.324Z,1428006531.324 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:28:51.761Z,1428006531.761 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:28:52.233Z,1428006532.233 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:28:52.674Z,1428006532.674 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:28:53.138Z,1428006533.138 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:28:53.575Z,1428006533.575 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:28:54.044Z,1428006534.044 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:28:54.469Z,1428006534.469 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:28:54.925Z,1428006534.925 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:28:55.358Z,1428006535.358 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:28:55.826Z,1428006535.826 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:28:56.243Z,1428006536.243 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:28:56.732Z,1428006536.732 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:28:57.165Z,1428006537.165 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:28:57.627Z,1428006537.627 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:28:58.106Z,1428006538.106 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:28:58.559Z,1428006538.559 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:28:59.003Z,1428006539.003 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:28:59.500Z,1428006539.500 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:28:59.961Z,1428006539.961 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:29:00.060Z,1428006540.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:29:00.462Z,1428006540.462 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:29:00.504Z,1428006540.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:29:00.914Z,1428006540.914 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:29:01.389Z,1428006541.389 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:29:01.816Z,1428006541.816 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:29:02.273Z,1428006542.273 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:29:02.697Z,1428006542.697 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:29:03.150Z,1428006543.150 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:29:03.578Z,1428006543.578 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:29:04.048Z,1428006544.048 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:29:04.473Z,1428006544.473 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:29:04.929Z,1428006544.929 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:29:05.361Z,1428006545.361 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:29:05.417Z,1428006545.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:29:05.826Z,1428006545.826 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:29:05.840Z,1428006545.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:29:06.347Z,1428006546.347 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:29:06.391Z,1428006546.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 2 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:29:06.813Z,1428006546.813 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:29:06.826Z,1428006546.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 3 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:29:07.236Z,1428006547.236 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:29:07.313Z,1428006547.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 4 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:29:07.710Z,1428006547.710 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:29:07.737Z,1428006547.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 5 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:29:08.141Z,1428006548.141 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:29:08.602Z,1428006548.602 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:29:09.019Z,1428006549.019 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:29:09.061Z,1428006549.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:29:09.460Z,1428006549.460 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:29:09.473Z,1428006549.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:29:09.889Z,1428006549.889 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:29:10.325Z,1428006550.325 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:29:10.755Z,1428006550.755 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:29:10.787Z,1428006550.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:29:11.210Z,1428006551.210 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:29:11.213Z,1428006551.213 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check.
2015-04-02T20:29:11.293Z,1428006551.293 [NAL9602](FAULT): received: 
+CSQ:0

OK
2015-04-02T20:29:11.293Z,1428006551.293 [NAL9602] Data Fault, FailCount= 1
2015-04-02T20:29:11.293Z,1428006551.293 [NAL9602](ERROR): Data Fault
2015-04-02T20:29:11.371Z,1428006551.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:29:11.387Z,1428006551.387 [CBIT](ERROR): Data Fault in component: NAL9602
2015-04-02T20:29:11.783Z,1428006551.783 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:29:11.817Z,1428006551.817 [NAL9602](INFO): Powering down
2015-04-02T20:29:12.248Z,1428006552.248 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:29:12.693Z,1428006552.693 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:29:12.734Z,1428006552.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:29:12.766Z,1428006552.766 [CBIT](INFO): Clearing failed state for component NAL9602
2015-04-02T20:29:12.767Z,1428006552.767 [NAL9602] No Fault, FailCount= 1
2015-04-02T20:29:13.159Z,1428006553.159 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:29:13.214Z,1428006553.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:29:13.626Z,1428006553.626 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:29:13.693Z,1428006553.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 2 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:29:14.095Z,1428006554.095 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:29:14.142Z,1428006554.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 3 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:29:14.561Z,1428006554.561 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:29:15.036Z,1428006555.036 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:29:15.473Z,1428006555.473 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:29:15.986Z,1428006555.986 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:29:16.407Z,1428006556.407 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:29:16.850Z,1428006556.850 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:29:16.853Z,1428006556.853 [NAL9602](INFO): Powering up NAL9602
2015-04-02T20:29:17.276Z,1428006557.276 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:29:17.721Z,1428006557.721 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:29:18.132Z,1428006558.132 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:29:18.562Z,1428006558.562 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:29:19.014Z,1428006559.014 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:29:19.458Z,1428006559.458 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:29:19.885Z,1428006559.885 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:29:20.337Z,1428006560.337 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:29:20.760Z,1428006560.760 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:29:20.816Z,1428006560.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:29:21.226Z,1428006561.226 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:29:21.248Z,1428006561.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:29:21.658Z,1428006561.658 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:29:22.141Z,1428006562.141 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:29:22.560Z,1428006562.560 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:29:23.021Z,1428006563.021 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:29:23.447Z,1428006563.447 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:29:23.886Z,1428006563.886 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:29:24.311Z,1428006564.311 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:29:24.342Z,1428006564.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:29:24.761Z,1428006564.761 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:29:24.774Z,1428006564.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:29:25.180Z,1428006565.180 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:29:25.658Z,1428006565.658 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:29:26.090Z,1428006566.090 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:29:26.145Z,1428006566.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:29:26.550Z,1428006566.550 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:29:26.581Z,1428006566.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:29:26.979Z,1428006566.979 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:29:27.425Z,1428006567.425 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:29:27.856Z,1428006567.856 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:29:27.890Z,1428006567.890 [NAL9602](INFO): NAL9602 initialized
2015-04-02T20:29:27.901Z,1428006567.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:29:28.317Z,1428006568.317 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:29:28.339Z,1428006568.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:29:28.750Z,1428006568.750 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:29:29.218Z,1428006569.218 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:29:29.663Z,1428006569.663 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:29:29.716Z,1428006569.716 [BPC1](ERROR): Failed to receive battery data
2015-04-02T20:29:29.716Z,1428006569.716 [BPC1] Communications Fault, FailCount= 1
2015-04-02T20:29:29.716Z,1428006569.716 [BPC1](ERROR): Communications Fault
2015-04-02T20:29:29.785Z,1428006569.785 [CBIT](ERROR): Communications Fault in component: BPC1
2015-04-02T20:29:30.156Z,1428006570.156 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:29:30.560Z,1428006570.560 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:29:31.021Z,1428006571.021 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:29:31.080Z,1428006571.080 [CBIT](INFO): Clearing failed state for component BPC1
2015-04-02T20:29:31.080Z,1428006571.080 [BPC1] No Fault, FailCount= 1
2015-04-02T20:29:31.458Z,1428006571.458 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:29:32.007Z,1428006572.007 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:29:32.444Z,1428006572.444 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2015-04-02T20:29:32.461Z,1428006572.461 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:29:32.912Z,1428006572.912 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:29:33.329Z,1428006573.329 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:29:33.793Z,1428006573.793 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:29:34.226Z,1428006574.226 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:29:34.691Z,1428006574.691 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:29:35.131Z,1428006575.131 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:29:35.217Z,1428006575.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:29:35.619Z,1428006575.619 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:29:35.645Z,1428006575.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:29:36.058Z,1428006576.058 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:29:36.141Z,1428006576.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 2 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:29:36.550Z,1428006576.550 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:29:36.624Z,1428006576.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 3 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:29:37.012Z,1428006577.012 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:29:37.468Z,1428006577.468 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:29:37.888Z,1428006577.888 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:29:38.345Z,1428006578.345 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:29:38.766Z,1428006578.766 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:29:39.223Z,1428006579.223 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:29:39.643Z,1428006579.643 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:29:39.698Z,1428006579.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:29:40.103Z,1428006580.103 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:29:40.147Z,1428006580.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:29:40.556Z,1428006580.556 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:29:41.041Z,1428006581.041 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:29:41.461Z,1428006581.461 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:29:41.502Z,1428006581.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:29:41.931Z,1428006581.931 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:29:41.945Z,1428006581.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:29:42.355Z,1428006582.355 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:29:42.807Z,1428006582.807 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:29:43.237Z,1428006583.237 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:29:43.690Z,1428006583.690 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:29:44.113Z,1428006584.113 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:29:44.181Z,1428006584.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:29:44.582Z,1428006584.582 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:29:44.610Z,1428006584.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:29:45.015Z,1428006585.015 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:29:45.487Z,1428006585.487 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:29:45.945Z,1428006585.945 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:29:46.051Z,1428006586.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:29:46.436Z,1428006586.436 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:29:46.467Z,1428006586.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:29:46.870Z,1428006586.870 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:29:47.383Z,1428006587.383 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:29:47.819Z,1428006587.819 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:29:47.950Z,1428006587.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:29:48.364Z,1428006588.364 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:29:48.419Z,1428006588.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:29:48.833Z,1428006588.833 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:29:49.306Z,1428006589.306 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:29:49.726Z,1428006589.726 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:29:49.818Z,1428006589.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:29:50.220Z,1428006590.220 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:29:50.250Z,1428006590.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:29:50.643Z,1428006590.643 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:29:51.108Z,1428006591.108 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:29:51.545Z,1428006591.545 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:29:51.606Z,1428006591.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:29:52.017Z,1428006592.017 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:29:52.040Z,1428006592.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:29:52.466Z,1428006592.466 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:29:52.939Z,1428006592.939 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:29:53.343Z,1428006593.343 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:29:53.402Z,1428006593.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:29:53.804Z,1428006593.804 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:29:53.833Z,1428006593.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:29:54.229Z,1428006594.229 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:29:54.264Z,1428006594.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 2 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:29:54.682Z,1428006594.682 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:29:54.712Z,1428006594.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 3 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:29:55.115Z,1428006595.115 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:29:55.595Z,1428006595.595 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:29:56.020Z,1428006596.020 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:29:56.473Z,1428006596.473 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:29:56.905Z,1428006596.905 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:29:57.358Z,1428006597.358 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:29:57.803Z,1428006597.803 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:29:57.879Z,1428006597.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:29:58.279Z,1428006598.279 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:29:58.306Z,1428006598.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:29:58.717Z,1428006598.717 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:29:58.765Z,1428006598.765 [BPC1](ERROR): Failed to parse message.
2015-04-02T20:29:58.765Z,1428006598.765 [BPC1](ERROR): Failed to parse bank A battery data
2015-04-02T20:29:58.765Z,1428006598.765 [BPC1] Data Fault, FailCount= 1
2015-04-02T20:29:58.765Z,1428006598.765 [BPC1](ERROR): Data Fault
2015-04-02T20:29:58.804Z,1428006598.804 [CBIT](ERROR): Data Fault in component: BPC1
2015-04-02T20:29:59.202Z,1428006599.202 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:29:59.621Z,1428006599.621 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:30:00.082Z,1428006600.082 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:30:00.126Z,1428006600.126 [CBIT](INFO): Clearing failed state for component BPC1
2015-04-02T20:30:00.126Z,1428006600.126 [BPC1] No Fault, FailCount= 1
2015-04-02T20:30:00.500Z,1428006600.500 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:30:00.607Z,1428006600.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:30:01.008Z,1428006601.008 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:30:01.070Z,1428006601.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:30:01.472Z,1428006601.472 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:30:01.933Z,1428006601.933 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:30:02.361Z,1428006602.361 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:30:02.798Z,1428006602.798 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:30:03.231Z,1428006603.231 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:30:03.684Z,1428006603.684 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:30:04.136Z,1428006604.136 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:30:04.611Z,1428006604.611 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:30:05.026Z,1428006605.026 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:30:05.079Z,1428006605.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:30:05.478Z,1428006605.478 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:30:05.492Z,1428006605.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:30:05.916Z,1428006605.916 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:30:06.372Z,1428006606.372 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:30:06.822Z,1428006606.822 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:30:06.858Z,1428006606.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:30:07.281Z,1428006607.281 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:30:07.312Z,1428006607.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:30:07.738Z,1428006607.738 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:30:07.837Z,1428006607.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 2 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:30:08.259Z,1428006608.259 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:30:08.272Z,1428006608.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 3 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:30:08.684Z,1428006608.684 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:30:09.144Z,1428006609.144 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:30:09.581Z,1428006609.581 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:30:09.635Z,1428006609.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:30:10.046Z,1428006610.046 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:30:10.071Z,1428006610.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:30:10.479Z,1428006610.479 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:30:10.957Z,1428006610.957 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:30:11.380Z,1428006611.380 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:30:11.441Z,1428006611.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:30:11.852Z,1428006611.852 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:30:11.947Z,1428006611.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:30:12.329Z,1428006612.329 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:30:12.380Z,1428006612.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 2 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:30:12.790Z,1428006612.790 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:30:12.848Z,1428006612.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 3 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:30:13.254Z,1428006613.254 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:30:13.733Z,1428006613.733 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:30:14.185Z,1428006614.185 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:30:14.267Z,1428006614.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:30:14.682Z,1428006614.682 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:30:14.696Z,1428006614.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:30:15.105Z,1428006615.105 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:30:15.566Z,1428006615.566 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:30:16.032Z,1428006616.032 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:30:16.076Z,1428006616.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:30:16.482Z,1428006616.482 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:30:16.495Z,1428006616.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:30:16.904Z,1428006616.904 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:30:16.972Z,1428006616.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 2 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:30:17.371Z,1428006617.371 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:30:17.398Z,1428006617.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 3 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:30:17.797Z,1428006617.797 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:30:17.831Z,1428006617.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 4 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:30:18.258Z,1428006618.258 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:30:18.272Z,1428006618.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 5 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:30:18.675Z,1428006618.675 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:30:19.156Z,1428006619.156 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:30:19.603Z,1428006619.603 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:30:20.061Z,1428006620.061 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:30:20.493Z,1428006620.493 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:30:20.535Z,1428006620.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:30:20.956Z,1428006620.956 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:30:20.974Z,1428006620.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:30:21.379Z,1428006621.379 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:30:21.832Z,1428006621.832 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:30:22.252Z,1428006622.252 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:30:22.718Z,1428006622.718 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:30:23.178Z,1428006623.178 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:30:23.212Z,1428006623.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:30:23.639Z,1428006623.639 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:30:23.652Z,1428006623.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:30:24.080Z,1428006624.080 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:30:24.528Z,1428006624.528 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:30:24.961Z,1428006624.961 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:30:25.124Z,1428006625.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:30:25.522Z,1428006625.522 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:30:25.535Z,1428006625.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:30:25.952Z,1428006625.952 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:30:26.431Z,1428006626.431 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:30:26.849Z,1428006626.849 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:30:26.930Z,1428006626.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:30:27.320Z,1428006627.320 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:30:27.384Z,1428006627.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:30:27.789Z,1428006627.789 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:30:28.263Z,1428006628.263 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:30:28.682Z,1428006628.682 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:30:28.740Z,1428006628.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:30:29.147Z,1428006629.147 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:30:29.176Z,1428006629.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:30:29.576Z,1428006629.576 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:30:30.025Z,1428006630.025 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:30:30.441Z,1428006630.441 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:30:30.503Z,1428006630.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:30:30.923Z,1428006630.923 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:30:30.937Z,1428006630.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:30:31.343Z,1428006631.343 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:30:31.803Z,1428006631.803 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:30:32.240Z,1428006632.240 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:30:32.717Z,1428006632.717 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2015-04-02T20:30:32.735Z,1428006632.735 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:30:33.193Z,1428006633.193 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:30:33.256Z,1428006633.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:30:33.633Z,1428006633.633 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:30:33.661Z,1428006633.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:30:34.067Z,1428006634.067 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:30:34.527Z,1428006634.527 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:30:34.944Z,1428006634.944 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:30:35.381Z,1428006635.381 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:30:35.805Z,1428006635.805 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:30:35.846Z,1428006635.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:30:36.254Z,1428006636.254 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:30:36.289Z,1428006636.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:30:36.703Z,1428006636.703 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:30:37.160Z,1428006637.160 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:30:37.596Z,1428006637.596 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:30:37.657Z,1428006637.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:30:38.061Z,1428006638.061 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:30:38.087Z,1428006638.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:30:38.498Z,1428006638.498 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:30:38.995Z,1428006638.995 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:30:39.423Z,1428006639.423 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:30:39.465Z,1428006639.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:30:39.887Z,1428006639.887 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:30:39.949Z,1428006639.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:30:40.353Z,1428006640.353 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:30:40.853Z,1428006640.853 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:30:41.335Z,1428006641.335 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:30:41.819Z,1428006641.819 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:30:42.251Z,1428006642.251 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:30:42.712Z,1428006642.712 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:30:43.138Z,1428006643.138 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:30:43.595Z,1428006643.595 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:30:44.018Z,1428006644.018 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:30:44.074Z,1428006644.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:30:44.474Z,1428006644.474 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:30:44.496Z,1428006644.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:30:44.901Z,1428006644.901 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:30:44.935Z,1428006644.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 2 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:30:45.360Z,1428006645.360 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:30:45.376Z,1428006645.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 3 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:30:45.776Z,1428006645.776 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:30:46.238Z,1428006646.238 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:30:46.670Z,1428006646.670 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:30:46.729Z,1428006646.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:30:47.130Z,1428006647.130 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:30:47.152Z,1428006647.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:30:47.556Z,1428006647.556 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:30:48.010Z,1428006648.010 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:30:48.429Z,1428006648.429 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:30:48.485Z,1428006648.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:30:48.890Z,1428006648.890 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:30:48.940Z,1428006648.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:30:49.363Z,1428006649.363 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:30:49.861Z,1428006649.861 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:30:50.280Z,1428006650.280 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:30:50.741Z,1428006650.741 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:30:51.173Z,1428006651.173 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:30:51.206Z,1428006651.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:30:51.623Z,1428006651.623 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:30:51.637Z,1428006651.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:30:52.047Z,1428006652.047 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:30:52.526Z,1428006652.526 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:30:52.984Z,1428006652.984 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:30:53.421Z,1428006653.421 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:30:53.869Z,1428006653.869 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:30:54.322Z,1428006654.322 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:30:54.791Z,1428006654.791 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:30:54.832Z,1428006654.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:30:55.248Z,1428006655.248 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:30:55.309Z,1428006655.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:30:55.728Z,1428006655.728 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:30:56.241Z,1428006656.241 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:30:56.666Z,1428006656.666 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:30:56.708Z,1428006656.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:30:57.134Z,1428006657.134 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:30:57.147Z,1428006657.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:30:57.577Z,1428006657.577 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:30:58.036Z,1428006658.036 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:30:58.486Z,1428006658.486 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:30:58.521Z,1428006658.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:30:58.928Z,1428006658.928 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:30:58.952Z,1428006658.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:30:59.358Z,1428006659.358 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:30:59.827Z,1428006659.827 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:31:00.264Z,1428006660.264 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:31:00.728Z,1428006660.728 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:31:01.157Z,1428006661.157 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:31:01.595Z,1428006661.595 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:31:02.010Z,1428006662.010 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:31:02.471Z,1428006662.471 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:31:02.912Z,1428006662.912 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:31:03.358Z,1428006663.358 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:31:03.781Z,1428006663.781 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:31:03.842Z,1428006663.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:31:04.234Z,1428006664.234 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:31:04.248Z,1428006664.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:31:04.651Z,1428006664.651 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:31:05.115Z,1428006665.115 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:31:05.552Z,1428006665.552 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:31:05.595Z,1428006665.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:31:06.000Z,1428006666.000 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:31:06.014Z,1428006666.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:31:06.430Z,1428006666.430 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:31:06.914Z,1428006666.914 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:31:07.384Z,1428006667.384 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:31:07.855Z,1428006667.855 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:31:08.339Z,1428006668.339 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:31:08.370Z,1428006668.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:31:08.780Z,1428006668.780 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:31:08.842Z,1428006668.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:31:09.265Z,1428006669.265 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:31:09.730Z,1428006669.730 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:31:10.219Z,1428006670.219 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:31:10.712Z,1428006670.712 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:31:11.136Z,1428006671.136 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:31:11.178Z,1428006671.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:31:11.589Z,1428006671.589 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:31:11.617Z,1428006671.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:31:12.030Z,1428006672.030 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:31:12.535Z,1428006672.535 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:31:12.987Z,1428006672.987 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:31:13.070Z,1428006673.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:31:13.472Z,1428006673.472 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:31:13.485Z,1428006673.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:31:13.917Z,1428006673.917 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:31:13.950Z,1428006673.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 2 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:31:14.362Z,1428006674.362 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:31:14.380Z,1428006674.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 3 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:31:14.786Z,1428006674.786 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:31:15.255Z,1428006675.255 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:31:15.699Z,1428006675.699 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:31:15.745Z,1428006675.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:31:16.171Z,1428006676.171 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:31:16.185Z,1428006676.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:31:16.593Z,1428006676.593 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:31:17.065Z,1428006677.065 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:31:17.514Z,1428006677.514 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:31:17.601Z,1428006677.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:31:17.996Z,1428006677.996 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:31:18.045Z,1428006678.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:31:18.440Z,1428006678.440 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:31:18.890Z,1428006678.890 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:31:19.317Z,1428006679.317 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:31:19.358Z,1428006679.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:31:19.768Z,1428006679.768 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:31:19.781Z,1428006679.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:31:20.200Z,1428006680.200 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:31:20.649Z,1428006680.649 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:31:21.072Z,1428006681.072 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:31:21.131Z,1428006681.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:31:21.532Z,1428006681.532 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:31:21.580Z,1428006681.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:31:21.994Z,1428006681.994 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:31:22.458Z,1428006682.458 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:31:22.930Z,1428006682.930 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:31:22.997Z,1428006682.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:31:23.399Z,1428006683.399 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:31:23.451Z,1428006683.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:31:23.861Z,1428006683.861 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:31:24.313Z,1428006684.313 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:31:24.786Z,1428006684.786 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:31:24.874Z,1428006684.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:31:25.286Z,1428006685.286 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:31:25.300Z,1428006685.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:31:25.721Z,1428006685.721 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:31:26.174Z,1428006686.174 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:31:26.596Z,1428006686.596 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:31:27.070Z,1428006687.070 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:31:27.502Z,1428006687.502 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:31:27.559Z,1428006687.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:31:27.974Z,1428006687.974 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:31:27.989Z,1428006687.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:31:28.403Z,1428006688.403 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:31:28.881Z,1428006688.881 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:31:29.304Z,1428006689.304 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:31:29.761Z,1428006689.761 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:31:30.231Z,1428006690.231 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:31:30.673Z,1428006690.673 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:31:31.104Z,1428006691.104 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:31:31.135Z,1428006691.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:31:31.548Z,1428006691.548 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:31:31.571Z,1428006691.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:31:31.977Z,1428006691.977 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:31:32.459Z,1428006692.459 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:31:32.870Z,1428006692.870 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2015-04-02T20:31:32.878Z,1428006692.878 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:31:32.951Z,1428006692.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:31:33.351Z,1428006693.351 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:31:33.382Z,1428006693.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:31:33.787Z,1428006693.787 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:31:34.236Z,1428006694.236 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:31:34.665Z,1428006694.665 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:31:34.707Z,1428006694.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:31:35.126Z,1428006695.126 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:31:35.140Z,1428006695.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:31:35.546Z,1428006695.546 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:31:36.039Z,1428006696.039 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:31:36.485Z,1428006696.485 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:31:36.585Z,1428006696.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:31:36.986Z,1428006696.986 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:31:37.001Z,1428006697.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:31:37.409Z,1428006697.409 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:31:37.902Z,1428006697.902 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:31:38.323Z,1428006698.323 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:31:38.807Z,1428006698.807 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:31:39.285Z,1428006699.285 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:31:39.317Z,1428006699.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:31:39.729Z,1428006699.729 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:31:39.758Z,1428006699.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:31:40.153Z,1428006700.153 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:31:40.606Z,1428006700.606 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:31:41.052Z,1428006701.052 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:31:41.606Z,1428006701.606 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:31:42.025Z,1428006702.025 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:31:42.481Z,1428006702.481 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:31:42.905Z,1428006702.905 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:31:42.937Z,1428006702.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:31:43.350Z,1428006703.350 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:31:43.375Z,1428006703.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:31:43.783Z,1428006703.783 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:31:44.227Z,1428006704.227 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:31:44.652Z,1428006704.652 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:31:44.696Z,1428006704.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:31:45.124Z,1428006705.124 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:31:45.137Z,1428006705.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:31:45.542Z,1428006705.542 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:31:46.038Z,1428006706.038 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:31:46.463Z,1428006706.463 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:31:46.504Z,1428006706.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:31:46.916Z,1428006706.916 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:31:46.941Z,1428006706.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:31:47.348Z,1428006707.348 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:31:47.813Z,1428006707.813 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:31:48.242Z,1428006708.242 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:31:48.275Z,1428006708.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:31:48.694Z,1428006708.694 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:31:48.709Z,1428006708.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:31:49.124Z,1428006709.124 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:31:49.612Z,1428006709.612 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:31:50.101Z,1428006710.101 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:31:50.132Z,1428006710.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:31:50.547Z,1428006710.547 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:31:50.560Z,1428006710.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:31:50.968Z,1428006710.968 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:31:51.471Z,1428006711.471 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:31:51.897Z,1428006711.897 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:31:51.930Z,1428006711.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:31:52.340Z,1428006712.340 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:31:52.392Z,1428006712.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:31:52.807Z,1428006712.807 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:31:52.841Z,1428006712.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 2 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:31:53.255Z,1428006713.255 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:31:53.310Z,1428006713.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 3 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:31:53.714Z,1428006713.714 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:31:54.213Z,1428006714.213 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:31:54.632Z,1428006714.632 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:31:55.088Z,1428006715.088 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:31:55.511Z,1428006715.511 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:31:55.544Z,1428006715.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:31:55.963Z,1428006715.963 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:31:55.977Z,1428006715.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:31:56.382Z,1428006716.382 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:31:56.847Z,1428006716.847 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:31:57.288Z,1428006717.288 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:31:57.342Z,1428006717.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:31:57.750Z,1428006717.750 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:31:57.787Z,1428006717.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:31:58.189Z,1428006718.189 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:31:58.654Z,1428006718.654 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:31:59.083Z,1428006719.083 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:31:59.125Z,1428006719.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:31:59.540Z,1428006719.540 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:31:59.581Z,1428006719.581 [BPC1](DEBUG): Received data from all battery sticks
2015-04-02T20:31:59.590Z,1428006719.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:31:59.995Z,1428006719.995 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:32:00.453Z,1428006720.453 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:32:00.894Z,1428006720.894 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:32:00.938Z,1428006720.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:32:01.342Z,1428006721.342 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:32:01.356Z,1428006721.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:32:01.791Z,1428006721.791 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:32:01.904Z,1428006721.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 2 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:32:02.316Z,1428006722.316 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:32:02.358Z,1428006722.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 3 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:32:02.764Z,1428006722.764 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:32:02.823Z,1428006722.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 4 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:32:03.237Z,1428006723.237 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:32:03.267Z,1428006723.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 5 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:32:03.663Z,1428006723.663 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:32:04.112Z,1428006724.112 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:32:04.531Z,1428006724.531 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:32:04.988Z,1428006724.988 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:32:05.421Z,1428006725.421 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:32:05.455Z,1428006725.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:32:05.860Z,1428006725.860 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:32:05.905Z,1428006725.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:32:06.318Z,1428006726.318 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:32:06.363Z,1428006726.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 2 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:32:06.787Z,1428006726.787 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:32:06.849Z,1428006726.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 3 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:32:10.108Z,1428006730.108 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:32:10.556Z,1428006730.556 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:32:11.046Z,1428006731.046 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:32:11.546Z,1428006731.546 [DataOverHttps](INFO): setting available, lastComms_.elapsed()=0.002606
2015-04-02T20:32:11.554Z,1428006731.554 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:32:11.971Z,1428006731.971 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:32:12.014Z,1428006732.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:32:12.427Z,1428006732.427 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:32:12.452Z,1428006732.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:32:12.868Z,1428006732.868 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:32:12.921Z,1428006732.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 2 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:32:13.337Z,1428006733.337 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:32:13.360Z,1428006733.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 3 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:32:13.781Z,1428006733.781 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:32:14.233Z,1428006734.233 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:32:14.660Z,1428006734.660 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:32:14.693Z,1428006734.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:32:15.111Z,1428006735.111 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:32:15.137Z,1428006735.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:32:15.536Z,1428006735.536 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:32:16.025Z,1428006736.025 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:32:16.437Z,1428006736.437 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:32:16.921Z,1428006736.921 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:32:17.339Z,1428006737.339 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:32:17.812Z,1428006737.812 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:32:18.241Z,1428006738.241 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:32:18.303Z,1428006738.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:32:18.705Z,1428006738.705 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:32:18.719Z,1428006738.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:32:19.135Z,1428006739.135 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:32:19.619Z,1428006739.619 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:32:20.064Z,1428006740.064 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:32:20.127Z,1428006740.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:32:20.524Z,1428006740.524 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:32:20.537Z,1428006740.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:32:20.950Z,1428006740.950 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:32:21.407Z,1428006741.407 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:32:21.826Z,1428006741.826 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:32:22.299Z,1428006742.299 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:32:22.757Z,1428006742.757 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:32:23.233Z,1428006743.233 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:32:23.716Z,1428006743.716 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:32:23.764Z,1428006743.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:32:24.172Z,1428006744.172 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:32:24.232Z,1428006744.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:32:24.630Z,1428006744.630 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:32:25.098Z,1428006745.098 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:32:25.572Z,1428006745.572 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:32:26.044Z,1428006746.044 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:32:26.470Z,1428006746.470 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:32:26.920Z,1428006746.920 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:32:27.342Z,1428006747.342 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:32:27.401Z,1428006747.401 [Default:UpdateAndReportMinutesSinceMissionStarted] Running Loop=1
2015-04-02T20:32:27.401Z,1428006747.401 [Default:UpdateAndReportMinutesSinceMissionStarted](INFO): Aggregate::initialize Default:UpdateAndReportMinutesSinceMissionStarted
2015-04-02T20:32:27.401Z,1428006747.401 [Default:UpdateAndReportMinutesSinceMissionStarted:A] Running Loop=1
2015-04-02T20:32:27.402Z,1428006747.402 [Default:UpdateAndReportMinutesSinceMissionStarted:A] Stopped
2015-04-02T20:32:27.402Z,1428006747.402 [Default:UpdateAndReportMinutesSinceMissionStarted:B] Running Loop=1
2015-04-02T20:32:27.803Z,1428006747.803 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:32:27.838Z,1428006747.838 [Default:UpdateAndReportMinutesSinceMissionStarted:B](IMPORTANT): Default mission has been running for 11.832186 min 
2015-04-02T20:32:27.838Z,1428006747.838 [Default:UpdateAndReportMinutesSinceMissionStarted:B] Stopped
2015-04-02T20:32:27.838Z,1428006747.838 [Default:UpdateAndReportMinutesSinceMissionStarted](INFO): Completed Default:UpdateAndReportMinutesSinceMissionStarted
2015-04-02T20:32:27.838Z,1428006747.838 [Default:UpdateAndReportMinutesSinceMissionStarted] Stopped
2015-04-02T20:32:27.838Z,1428006747.838 [Default:UpdateAndReportMinutesSinceMissionStarted](INFO): Aggregate::uninitialize Default:UpdateAndReportMinutesSinceMissionStarted
2015-04-02T20:32:28.232Z,1428006748.232 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:32:28.264Z,1428006748.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:32:28.688Z,1428006748.688 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:32:28.702Z,1428006748.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:32:29.112Z,1428006749.112 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:32:29.172Z,1428006749.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 2 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:32:29.578Z,1428006749.578 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:32:29.601Z,1428006749.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 3 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:32:30.014Z,1428006750.014 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:32:30.471Z,1428006750.471 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:32:30.900Z,1428006750.900 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:32:31.386Z,1428006751.386 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:32:31.821Z,1428006751.821 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:32:31.868Z,1428006751.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:32:32.295Z,1428006752.295 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:32:32.325Z,1428006752.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:32:32.744Z,1428006752.744 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:32:33.208Z,1428006753.208 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:32:33.640Z,1428006753.640 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:32:34.077Z,1428006754.077 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:32:34.518Z,1428006754.518 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:32:34.549Z,1428006754.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:32:34.975Z,1428006754.975 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:32:34.989Z,1428006754.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:32:35.407Z,1428006755.407 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:32:35.864Z,1428006755.864 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:32:36.296Z,1428006756.296 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:32:36.361Z,1428006756.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:32:36.761Z,1428006756.761 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:32:36.786Z,1428006756.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:32:37.198Z,1428006757.198 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:32:37.686Z,1428006757.686 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:32:38.169Z,1428006758.169 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:32:38.612Z,1428006758.612 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:32:39.086Z,1428006759.086 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:32:39.538Z,1428006759.538 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:32:39.987Z,1428006759.987 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:32:40.069Z,1428006760.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:32:40.467Z,1428006760.467 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:32:40.480Z,1428006760.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:32:40.897Z,1428006760.897 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:32:41.366Z,1428006761.366 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:32:41.805Z,1428006761.805 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:32:42.275Z,1428006762.275 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:32:42.698Z,1428006762.698 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:32:43.151Z,1428006763.151 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:32:43.571Z,1428006763.571 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:32:44.036Z,1428006764.036 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:32:44.478Z,1428006764.478 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:32:44.901Z,1428006764.901 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:32:45.330Z,1428006765.330 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:32:45.858Z,1428006765.858 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:32:46.288Z,1428006766.288 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:32:46.729Z,1428006766.729 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:32:47.161Z,1428006767.161 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:32:47.611Z,1428006767.611 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:32:48.035Z,1428006768.035 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:32:48.087Z,1428006768.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:32:48.491Z,1428006768.491 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:32:48.520Z,1428006768.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:32:48.932Z,1428006768.932 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:32:49.441Z,1428006769.441 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:32:49.875Z,1428006769.875 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:32:49.907Z,1428006769.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:32:50.334Z,1428006770.334 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:32:50.348Z,1428006770.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:32:50.781Z,1428006770.781 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:32:51.224Z,1428006771.224 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:32:51.656Z,1428006771.656 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:32:52.153Z,1428006772.153 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:32:52.614Z,1428006772.614 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:32:53.082Z,1428006773.082 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:32:53.541Z,1428006773.541 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:32:54.013Z,1428006774.013 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:32:54.446Z,1428006774.446 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:32:54.921Z,1428006774.921 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:32:55.368Z,1428006775.368 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:32:55.826Z,1428006775.826 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:32:56.247Z,1428006776.247 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:32:56.692Z,1428006776.692 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:32:57.128Z,1428006777.128 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:32:57.194Z,1428006777.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:32:57.615Z,1428006777.615 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:32:57.628Z,1428006777.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:32:58.034Z,1428006778.034 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:32:58.499Z,1428006778.499 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:32:58.923Z,1428006778.923 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:32:58.955Z,1428006778.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:32:59.376Z,1428006779.376 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:32:59.390Z,1428006779.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:32:59.797Z,1428006779.797 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:33:00.266Z,1428006780.266 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:33:00.694Z,1428006780.694 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:33:01.151Z,1428006781.151 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:33:01.572Z,1428006781.572 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:33:02.028Z,1428006782.028 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:33:02.469Z,1428006782.469 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:33:02.517Z,1428006782.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:33:02.939Z,1428006782.939 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:33:02.952Z,1428006782.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:33:03.358Z,1428006783.358 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:33:03.417Z,1428006783.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 2 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:33:06.790Z,1428006786.790 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:33:06.866Z,1428006786.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 3 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:33:07.302Z,1428006787.302 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:33:07.825Z,1428006787.825 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:33:08.259Z,1428006788.259 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:33:08.742Z,1428006788.742 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:33:09.183Z,1428006789.183 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:33:09.680Z,1428006789.680 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:33:10.165Z,1428006790.165 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:33:10.248Z,1428006790.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:33:10.642Z,1428006790.642 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:33:10.655Z,1428006790.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:33:11.066Z,1428006791.066 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:33:11.532Z,1428006791.532 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:33:11.956Z,1428006791.956 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:33:12.408Z,1428006792.408 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:33:12.834Z,1428006792.834 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:33:13.287Z,1428006793.287 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:33:13.710Z,1428006793.710 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:33:14.169Z,1428006794.169 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:33:14.597Z,1428006794.597 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:33:14.630Z,1428006794.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:33:15.050Z,1428006795.050 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:33:15.063Z,1428006795.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:33:15.469Z,1428006795.469 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:33:15.947Z,1428006795.947 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:33:16.370Z,1428006796.370 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:33:16.440Z,1428006796.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:33:16.853Z,1428006796.853 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:33:16.867Z,1428006796.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:33:17.276Z,1428006797.276 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:33:17.758Z,1428006797.758 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:33:18.206Z,1428006798.206 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:33:18.766Z,1428006798.766 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:33:19.212Z,1428006799.212 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:33:19.245Z,1428006799.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:33:19.669Z,1428006799.669 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:33:19.683Z,1428006799.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:33:20.092Z,1428006800.092 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:33:20.557Z,1428006800.557 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:33:20.986Z,1428006800.986 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:33:21.434Z,1428006801.434 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:33:21.919Z,1428006801.919 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:33:21.961Z,1428006801.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:33:22.376Z,1428006802.376 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:33:22.436Z,1428006802.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:33:22.853Z,1428006802.853 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:33:23.341Z,1428006803.341 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:33:23.842Z,1428006803.842 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:33:24.332Z,1428006804.332 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:33:24.763Z,1428006804.763 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:33:25.212Z,1428006805.212 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:33:25.642Z,1428006805.642 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:33:26.090Z,1428006806.091 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:33:26.522Z,1428006806.522 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:33:26.563Z,1428006806.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:33:26.992Z,1428006806.992 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:33:27.006Z,1428006807.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:33:27.415Z,1428006807.415 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:33:27.507Z,1428006807.507 [Default:CheckIn:Read_GPS](INFO): Timed out from 2015-04-02T20:28:27.3Z
2015-04-02T20:33:27.507Z,1428006807.507 [Default:CheckIn:Read_GPS] Stopped
2015-04-02T20:33:27.507Z,1428006807.507 [Default:CheckIn:Read_Iridium] Running Loop=1
2015-04-02T20:33:27.899Z,1428006807.899 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:33:28.757Z,1428006808.757 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:33:29.210Z,1428006809.210 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:33:32.514Z,1428006812.514 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:33:32.993Z,1428006812.993 [DataOverHttps](INFO): Sending 193 bytes from file Logs/20150402T201714/Courier0012.lzma
2015-04-02T20:33:33.009Z,1428006813.009 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:33:33.455Z,1428006813.455 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:33:33.875Z,1428006813.875 [DataOverHttps](INFO): Moved sent file to Logs/20150402T201714/Courier0012.lzma.bak
2015-04-02T20:33:33.875Z,1428006813.875 [DataOverHttps](INFO): SBD MOMSN=3101133
2015-04-02T20:33:33.886Z,1428006813.886 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:33:34.379Z,1428006814.379 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:33:34.437Z,1428006814.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:33:34.859Z,1428006814.859 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:33:34.898Z,1428006814.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:33:38.231Z,1428006818.231 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:33:38.785Z,1428006818.785 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:33:39.206Z,1428006819.206 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:33:39.699Z,1428006819.699 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:33:40.155Z,1428006820.155 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:33:40.204Z,1428006820.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:33:40.637Z,1428006820.637 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:33:40.693Z,1428006820.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:33:43.963Z,1428006823.963 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:33:43.995Z,1428006823.995 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2015-04-02T20:33:44.430Z,1428006824.430 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20150402T201714/Courier0016.lzma
2015-04-02T20:33:44.442Z,1428006824.442 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:33:44.884Z,1428006824.884 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:33:45.325Z,1428006825.325 [DataOverHttps](INFO): Moved sent file to Logs/20150402T201714/Courier0016.lzma.bak
2015-04-02T20:33:45.325Z,1428006825.325 [DataOverHttps](INFO): SBD MOMSN=3101135
2015-04-02T20:33:45.349Z,1428006825.349 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:33:45.839Z,1428006825.839 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:33:45.871Z,1428006825.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:33:46.294Z,1428006826.294 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:33:46.307Z,1428006826.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:33:49.556Z,1428006829.556 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:33:49.579Z,1428006829.579 [NAL9602](INFO): Powering down
2015-04-02T20:33:49.645Z,1428006829.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 2 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:33:50.050Z,1428006830.050 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:33:50.063Z,1428006830.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 3 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:33:50.467Z,1428006830.467 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:33:50.944Z,1428006830.944 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:33:51.381Z,1428006831.381 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:33:51.430Z,1428006831.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:33:51.845Z,1428006831.845 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:33:51.870Z,1428006831.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:33:55.243Z,1428006835.243 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:33:55.286Z,1428006835.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 2 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:33:55.701Z,1428006835.701 [DataOverHttps](INFO): Sending 803 bytes from file Logs/20150402T201714/Express0013.lzma
2015-04-02T20:33:55.718Z,1428006835.718 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:33:55.731Z,1428006835.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 3 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:33:56.177Z,1428006836.177 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:33:56.691Z,1428006836.691 [DataOverHttps](INFO): Moved sent file to Logs/20150402T201714/Express0013.lzma.bak
2015-04-02T20:33:56.691Z,1428006836.691 [DataOverHttps](INFO): SBD MOMSN=3101137
2015-04-02T20:33:56.703Z,1428006836.703 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:33:57.216Z,1428006837.216 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:33:57.293Z,1428006837.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:33:57.706Z,1428006837.706 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:33:57.731Z,1428006837.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:34:00.981Z,1428006840.981 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:34:01.062Z,1428006841.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 2 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:34:01.478Z,1428006841.478 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:34:01.531Z,1428006841.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 3 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:34:01.937Z,1428006841.937 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:34:02.374Z,1428006842.374 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:34:02.806Z,1428006842.806 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:34:02.855Z,1428006842.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:34:03.275Z,1428006843.275 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:34:03.299Z,1428006843.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:34:06.553Z,1428006846.553 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:34:07.013Z,1428006847.013 [DataOverHttps](INFO): Sending 51 bytes from file Logs/20150402T201714/Express0017.lzma
2015-04-02T20:34:07.038Z,1428006847.038 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:34:07.478Z,1428006847.478 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:34:07.920Z,1428006847.920 [DataOverHttps](INFO): Moved sent file to Logs/20150402T201714/Express0017.lzma.bak
2015-04-02T20:34:07.920Z,1428006847.920 [DataOverHttps](INFO): SBD MOMSN=3101145
2015-04-02T20:34:07.931Z,1428006847.931 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:34:08.440Z,1428006848.440 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:34:08.477Z,1428006848.477 [Default:CheckIn:Read_Iridium] Stopped
2015-04-02T20:34:08.478Z,1428006848.478 [Default:CheckIn](INFO): Completed Default:CheckIn
2015-04-02T20:34:08.478Z,1428006848.478 [Default:CheckIn] Stopped
2015-04-02T20:34:08.478Z,1428006848.478 [Default:CheckIn](INFO): Aggregate::uninitialize Default:CheckIn
2015-04-02T20:34:08.478Z,1428006848.478 [Default:CheckIn:A.SetSpeed] Stopped
2015-04-02T20:34:08.478Z,1428006848.478 [Default:CheckIn:A.SetSpeed](DEBUG): Uninitialize.
2015-04-02T20:34:08.908Z,1428006848.908 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:34:16.705Z,1428006856.705 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:34:18.855Z,1428006858.855 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:34:23.850Z,1428006863.850 [Depth_Keller](ERROR): Pressure reading out of range: 1830.859985 decibar
2015-04-02T20:34:23.852Z,1428006863.852 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:34:23.858Z,1428006863.858 [Radio_Surface](INFO): Powering down
2015-04-02T20:34:23.949Z,1428006863.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:34:28.855Z,1428006868.855 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:34:28.868Z,1428006868.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:34:33.850Z,1428006873.850 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:34:33.952Z,1428006873.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 2 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:34:38.858Z,1428006878.858 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:34:38.914Z,1428006878.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 3 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:34:43.854Z,1428006883.854 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:34:48.850Z,1428006888.850 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:34:53.849Z,1428006893.849 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:34:58.849Z,1428006898.849 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:35:03.849Z,1428006903.849 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:35:03.933Z,1428006903.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:35:08.849Z,1428006908.849 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:35:08.873Z,1428006908.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:35:13.862Z,1428006913.862 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:35:18.865Z,1428006918.865 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:35:23.847Z,1428006923.847 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:35:23.887Z,1428006923.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:35:28.861Z,1428006928.861 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:35:28.875Z,1428006928.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:35:33.851Z,1428006933.851 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:35:38.847Z,1428006938.847 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:35:43.844Z,1428006943.844 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2015-04-02T20:35:43.846Z,1428006943.846 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:35:48.851Z,1428006948.851 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:35:53.846Z,1428006953.846 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:35:53.930Z,1428006953.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:35:58.854Z,1428006958.854 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:35:58.915Z,1428006958.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:36:03.853Z,1428006963.853 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:36:08.858Z,1428006968.858 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:36:13.849Z,1428006973.849 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:36:18.861Z,1428006978.861 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:36:23.853Z,1428006983.853 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:36:28.845Z,1428006988.845 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:36:33.856Z,1428006993.856 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:36:38.856Z,1428006998.856 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:36:43.844Z,1428007003.844 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2015-04-02T20:36:43.852Z,1428007003.852 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:36:48.864Z,1428007008.864 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:36:53.854Z,1428007013.854 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:36:58.855Z,1428007018.855 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:37:03.846Z,1428007023.846 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:37:08.851Z,1428007028.851 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:37:09.030Z,1428007029.030 [Radio_Surface](INFO): Powering up
2015-04-02T20:37:13.850Z,1428007033.850 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:37:18.858Z,1428007038.858 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:37:23.853Z,1428007043.853 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:37:23.913Z,1428007043.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:37:28.850Z,1428007048.850 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:37:28.864Z,1428007048.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:37:28.870Z,1428007048.870 [Default:UpdateAndReportMinutesSinceMissionStarted] Running Loop=1
2015-04-02T20:37:28.871Z,1428007048.871 [Default:UpdateAndReportMinutesSinceMissionStarted](INFO): Aggregate::initialize Default:UpdateAndReportMinutesSinceMissionStarted
2015-04-02T20:37:28.871Z,1428007048.871 [Default:UpdateAndReportMinutesSinceMissionStarted:A] Running Loop=1
2015-04-02T20:37:28.871Z,1428007048.871 [Default:UpdateAndReportMinutesSinceMissionStarted:A] Stopped
2015-04-02T20:37:28.871Z,1428007048.871 [Default:UpdateAndReportMinutesSinceMissionStarted:B] Running Loop=1
2015-04-02T20:37:29.000Z,1428007049.000 [CBIT](DEBUG): EFC running - data check-sum false
2015-04-02T20:37:33.842Z,1428007053.842 [DataOverHttps](INFO): setting unavailable, lastComms_.elapsed()=184.998322
2015-04-02T20:37:33.850Z,1428007053.850 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:37:33.977Z,1428007053.977 [Default:UpdateAndReportMinutesSinceMissionStarted:B](IMPORTANT): Default mission has been running for 16.858199 min 
2015-04-02T20:37:33.977Z,1428007053.977 [Default:UpdateAndReportMinutesSinceMissionStarted:B] Stopped
2015-04-02T20:37:33.977Z,1428007053.977 [Default:UpdateAndReportMinutesSinceMissionStarted](INFO): Completed Default:UpdateAndReportMinutesSinceMissionStarted
2015-04-02T20:37:33.977Z,1428007053.977 [Default:UpdateAndReportMinutesSinceMissionStarted] Stopped
2015-04-02T20:37:33.977Z,1428007053.977 [Default:UpdateAndReportMinutesSinceMissionStarted](INFO): Aggregate::uninitialize Default:UpdateAndReportMinutesSinceMissionStarted
2015-04-02T20:37:33.978Z,1428007053.978 [Default:CheckIn] Running Loop=1
2015-04-02T20:37:33.978Z,1428007053.978 [Default:CheckIn](INFO): Aggregate::initialize Default:CheckIn
2015-04-02T20:37:33.978Z,1428007053.978 [Default:CheckIn:A.SetSpeed] Running Loop=1
2015-04-02T20:37:33.978Z,1428007053.978 [Default:CheckIn:A.SetSpeed](DEBUG): Initialize.
2015-04-02T20:37:33.978Z,1428007053.978 [Default:CheckIn:Read_GPS] Running Loop=1
2015-04-02T20:37:34.483Z,1428007054.483 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:37:34.486Z,1428007054.486 [NAL9602](INFO): Powering up
2015-04-02T20:37:34.923Z,1428007054.923 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:37:35.436Z,1428007055.436 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:37:35.893Z,1428007055.893 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:37:35.938Z,1428007055.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:37:36.349Z,1428007056.349 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:37:36.405Z,1428007056.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:37:36.830Z,1428007056.830 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:37:37.336Z,1428007057.336 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:37:37.777Z,1428007057.777 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:37:37.830Z,1428007057.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:37:38.233Z,1428007058.233 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:37:38.246Z,1428007058.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:37:38.673Z,1428007058.673 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:37:39.130Z,1428007059.130 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:37:39.568Z,1428007059.568 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:37:40.031Z,1428007060.031 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:37:40.460Z,1428007060.460 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:37:40.940Z,1428007060.940 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:37:41.381Z,1428007061.381 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:37:41.850Z,1428007061.850 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:37:42.275Z,1428007062.275 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:37:42.307Z,1428007062.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:37:42.728Z,1428007062.728 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:37:42.742Z,1428007062.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:37:43.152Z,1428007063.152 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:37:43.609Z,1428007063.609 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:37:44.034Z,1428007064.034 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:37:44.067Z,1428007064.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:37:44.494Z,1428007064.494 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:37:44.508Z,1428007064.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:37:44.919Z,1428007064.919 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:37:45.398Z,1428007065.398 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:37:45.401Z,1428007065.401 [NAL9602](INFO): NAL9602 initialized
2015-04-02T20:37:45.816Z,1428007065.816 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:37:46.285Z,1428007066.285 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:37:46.726Z,1428007066.726 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:37:46.812Z,1428007066.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:37:47.218Z,1428007067.218 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:37:47.264Z,1428007067.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:37:47.683Z,1428007067.683 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:37:48.136Z,1428007068.136 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:37:48.584Z,1428007068.584 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:37:48.680Z,1428007068.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:37:49.084Z,1428007069.084 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:37:49.140Z,1428007069.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:37:49.559Z,1428007069.559 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:37:50.007Z,1428007070.007 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:37:50.435Z,1428007070.435 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:37:50.527Z,1428007070.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:37:50.936Z,1428007070.936 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:37:50.950Z,1428007070.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:37:51.405Z,1428007071.405 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:37:51.914Z,1428007071.914 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:37:52.394Z,1428007072.394 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:37:52.465Z,1428007072.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:37:52.871Z,1428007072.871 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:37:52.896Z,1428007072.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:37:53.312Z,1428007073.312 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:37:53.785Z,1428007073.785 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:37:54.213Z,1428007074.213 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:37:54.269Z,1428007074.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:37:54.700Z,1428007074.700 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:37:54.713Z,1428007074.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:37:55.139Z,1428007075.139 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:37:55.591Z,1428007075.591 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:37:56.049Z,1428007076.049 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:37:56.529Z,1428007076.529 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:37:56.985Z,1428007076.985 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:37:57.030Z,1428007077.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:37:57.442Z,1428007077.442 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:37:57.467Z,1428007077.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:37:57.879Z,1428007077.879 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:37:58.348Z,1428007078.348 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:37:58.792Z,1428007078.792 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:37:59.249Z,1428007079.249 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:37:59.678Z,1428007079.678 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:37:59.711Z,1428007079.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:38:00.135Z,1428007080.135 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:38:00.148Z,1428007080.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:38:00.563Z,1428007080.563 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:38:01.112Z,1428007081.112 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:38:01.545Z,1428007081.545 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:38:01.601Z,1428007081.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:38:02.013Z,1428007082.013 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:38:02.043Z,1428007082.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:38:02.438Z,1428007082.438 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:38:02.891Z,1428007082.891 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:38:03.355Z,1428007083.355 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:38:03.417Z,1428007083.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:38:03.833Z,1428007083.833 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:38:03.891Z,1428007083.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:38:04.293Z,1428007084.293 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:38:04.746Z,1428007084.746 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:38:05.214Z,1428007085.214 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:38:05.664Z,1428007085.664 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:38:06.131Z,1428007086.131 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:38:06.220Z,1428007086.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:38:06.625Z,1428007086.625 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:38:06.653Z,1428007086.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:38:07.049Z,1428007087.049 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:38:07.566Z,1428007087.566 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:38:08.012Z,1428007088.012 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:38:08.045Z,1428007088.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:38:08.467Z,1428007088.467 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:38:08.480Z,1428007088.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:38:08.892Z,1428007088.892 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:38:09.349Z,1428007089.349 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:38:09.780Z,1428007089.780 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:38:10.230Z,1428007090.230 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:38:10.649Z,1428007090.649 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:38:10.695Z,1428007090.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:38:11.121Z,1428007091.121 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:38:11.134Z,1428007091.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:38:11.544Z,1428007091.544 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:38:12.009Z,1428007092.009 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:38:12.449Z,1428007092.449 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:38:12.915Z,1428007092.915 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:38:13.347Z,1428007093.347 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:38:13.422Z,1428007093.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:38:13.829Z,1428007093.829 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:38:13.843Z,1428007093.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:38:14.252Z,1428007094.252 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:38:14.730Z,1428007094.730 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:38:15.154Z,1428007095.154 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:38:15.214Z,1428007095.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:38:15.636Z,1428007095.636 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:38:15.649Z,1428007095.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:38:16.059Z,1428007096.059 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:38:16.516Z,1428007096.516 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:38:16.957Z,1428007096.957 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:38:17.027Z,1428007097.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:38:17.433Z,1428007097.433 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:38:17.445Z,1428007097.445 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check.
2015-04-02T20:38:17.528Z,1428007097.528 [NAL9602](FAULT): received: 
+CSQ:0

OK
2015-04-02T20:38:17.528Z,1428007097.528 [NAL9602] Data Fault, FailCount= 2
2015-04-02T20:38:17.528Z,1428007097.528 [NAL9602](ERROR): Data Fault
2015-04-02T20:38:17.594Z,1428007097.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:38:17.610Z,1428007097.610 [CBIT](ERROR): Data Fault in component: NAL9602
2015-04-02T20:38:18.006Z,1428007098.006 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:38:18.027Z,1428007098.027 [NAL9602](INFO): Powering down
2015-04-02T20:38:18.483Z,1428007098.483 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:38:18.887Z,1428007098.887 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:38:18.973Z,1428007098.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:38:18.988Z,1428007098.988 [CBIT](INFO): Clearing failed state for component NAL9602
2015-04-02T20:38:18.988Z,1428007098.988 [NAL9602] No Fault, FailCount= 2
2015-04-02T20:38:19.380Z,1428007099.380 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:38:19.393Z,1428007099.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:38:19.797Z,1428007099.797 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:38:20.277Z,1428007100.277 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:38:20.734Z,1428007100.734 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:38:21.199Z,1428007101.199 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:38:21.628Z,1428007101.628 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:38:22.068Z,1428007102.068 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:38:22.505Z,1428007102.505 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:38:22.958Z,1428007102.958 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:38:23.431Z,1428007103.431 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:38:23.461Z,1428007103.461 [NAL9602](INFO): Powering up NAL9602
2015-04-02T20:38:23.474Z,1428007103.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:38:23.897Z,1428007103.897 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:38:23.910Z,1428007103.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:38:24.312Z,1428007104.312 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:38:24.777Z,1428007104.777 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:38:25.201Z,1428007105.201 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:38:25.233Z,1428007105.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:38:25.650Z,1428007105.650 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:38:25.663Z,1428007105.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:38:26.071Z,1428007106.071 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:38:26.531Z,1428007106.531 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:38:26.976Z,1428007106.976 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:38:27.035Z,1428007107.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:38:27.433Z,1428007107.433 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:38:27.447Z,1428007107.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:38:27.865Z,1428007107.865 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:38:28.346Z,1428007108.346 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:38:28.787Z,1428007108.787 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:38:28.831Z,1428007108.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:38:29.240Z,1428007109.240 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:38:29.253Z,1428007109.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:38:29.670Z,1428007109.670 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:38:30.122Z,1428007110.122 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:38:30.538Z,1428007110.538 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:38:30.998Z,1428007110.998 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:38:31.424Z,1428007111.424 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:38:31.900Z,1428007111.900 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:38:32.320Z,1428007112.320 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:38:32.360Z,1428007112.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:38:32.752Z,1428007112.752 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:38:32.818Z,1428007112.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:38:33.222Z,1428007113.222 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:38:33.692Z,1428007113.692 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:38:34.139Z,1428007114.139 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:38:34.620Z,1428007114.620 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:38:34.623Z,1428007114.623 [NAL9602](INFO): NAL9602 initialized
2015-04-02T20:38:35.090Z,1428007115.090 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:38:35.562Z,1428007115.562 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:38:36.011Z,1428007116.011 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:38:36.075Z,1428007116.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:38:36.483Z,1428007116.483 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:38:36.521Z,1428007116.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:38:36.924Z,1428007116.924 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:38:37.370Z,1428007117.370 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:38:37.799Z,1428007117.799 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:38:37.831Z,1428007117.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:38:38.238Z,1428007118.238 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:38:38.264Z,1428007118.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:38:38.670Z,1428007118.670 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:38:39.135Z,1428007119.135 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:38:39.575Z,1428007119.575 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:38:39.632Z,1428007119.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:38:40.040Z,1428007120.040 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:38:40.066Z,1428007120.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:38:40.473Z,1428007120.473 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:38:40.930Z,1428007120.930 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:38:41.346Z,1428007121.346 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:38:41.390Z,1428007121.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:38:41.810Z,1428007121.810 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:38:41.823Z,1428007121.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:38:42.232Z,1428007122.232 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:38:42.692Z,1428007122.692 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:38:43.117Z,1428007123.117 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:38:43.200Z,1428007123.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:38:43.602Z,1428007123.602 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:38:43.634Z,1428007123.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:38:44.039Z,1428007124.039 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:38:44.520Z,1428007124.520 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2015-04-02T20:38:44.527Z,1428007124.527 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:38:44.975Z,1428007124.975 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:38:45.417Z,1428007125.417 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:38:45.882Z,1428007125.882 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:38:45.914Z,1428007125.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:38:46.322Z,1428007126.322 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:38:46.355Z,1428007126.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:38:46.771Z,1428007126.771 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:38:47.264Z,1428007127.264 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:38:47.693Z,1428007127.693 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:38:47.726Z,1428007127.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:38:48.145Z,1428007128.145 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:38:48.208Z,1428007128.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:38:48.613Z,1428007128.613 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:38:49.092Z,1428007129.092 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:38:49.571Z,1428007129.571 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:38:49.694Z,1428007129.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:38:50.100Z,1428007130.100 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:38:50.114Z,1428007130.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:38:50.533Z,1428007130.533 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:38:50.986Z,1428007130.986 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:38:51.418Z,1428007131.418 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:38:51.479Z,1428007131.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:38:51.883Z,1428007131.883 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:38:51.911Z,1428007131.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:38:52.311Z,1428007132.311 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:38:52.744Z,1428007132.744 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:38:53.177Z,1428007133.177 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:38:53.633Z,1428007133.633 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:38:54.090Z,1428007134.090 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:38:54.567Z,1428007134.567 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:38:55.003Z,1428007135.003 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:38:55.471Z,1428007135.471 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:38:55.913Z,1428007135.913 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:38:56.373Z,1428007136.373 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:38:56.806Z,1428007136.806 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:38:56.861Z,1428007136.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:38:57.271Z,1428007137.271 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:38:57.296Z,1428007137.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:38:57.700Z,1428007137.700 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:38:58.157Z,1428007138.157 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:38:58.613Z,1428007138.613 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:38:58.678Z,1428007138.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:38:59.098Z,1428007139.098 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:38:59.123Z,1428007139.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:38:59.544Z,1428007139.544 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:39:00.045Z,1428007140.045 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:39:00.545Z,1428007140.545 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:39:01.002Z,1428007141.002 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:39:01.426Z,1428007141.426 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:39:01.497Z,1428007141.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:39:01.908Z,1428007141.908 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:39:01.942Z,1428007141.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:39:02.351Z,1428007142.351 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:39:02.825Z,1428007142.825 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:39:03.274Z,1428007143.274 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:39:03.349Z,1428007143.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:39:03.733Z,1428007143.733 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:39:03.800Z,1428007143.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:39:04.202Z,1428007144.202 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:39:04.711Z,1428007144.711 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:39:05.148Z,1428007145.148 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:39:05.625Z,1428007145.625 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:39:06.045Z,1428007146.045 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:39:06.517Z,1428007146.517 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:39:06.950Z,1428007146.950 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:39:07.399Z,1428007147.399 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:39:07.832Z,1428007147.832 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:39:07.864Z,1428007147.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:39:08.285Z,1428007148.285 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:39:08.314Z,1428007148.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:39:08.735Z,1428007148.735 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:39:09.200Z,1428007149.200 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:39:09.634Z,1428007149.634 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:39:09.713Z,1428007149.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:39:10.108Z,1428007150.108 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:39:10.122Z,1428007150.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:39:10.536Z,1428007150.536 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:39:11.010Z,1428007151.010 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:39:11.441Z,1428007151.441 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:39:11.930Z,1428007151.930 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:39:12.354Z,1428007152.354 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:39:12.395Z,1428007152.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:39:12.807Z,1428007152.807 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:39:12.833Z,1428007152.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:39:13.248Z,1428007153.248 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:39:13.728Z,1428007153.728 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:39:14.165Z,1428007154.165 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:39:14.246Z,1428007154.246 [BPC1](ERROR): Failed to parse message.
2015-04-02T20:39:14.247Z,1428007154.247 [BPC1](ERROR): Failed to parse bank A battery data
2015-04-02T20:39:14.247Z,1428007154.247 [BPC1] Data Fault, FailCount= 1
2015-04-02T20:39:14.247Z,1428007154.247 [BPC1](ERROR): Data Fault
2015-04-02T20:39:14.286Z,1428007154.286 [CBIT](ERROR): Data Fault in component: BPC1
2015-04-02T20:39:14.686Z,1428007154.686 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:39:15.132Z,1428007155.132 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:39:15.558Z,1428007155.558 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:39:15.604Z,1428007155.604 [CBIT](INFO): Clearing failed state for component BPC1
2015-04-02T20:39:15.604Z,1428007155.604 [BPC1] No Fault, FailCount= 1
2015-04-02T20:39:16.000Z,1428007156.000 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:39:16.115Z,1428007156.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:39:16.525Z,1428007156.525 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:39:16.576Z,1428007156.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:39:16.982Z,1428007156.982 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:39:17.426Z,1428007157.426 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:39:17.851Z,1428007157.851 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:39:18.288Z,1428007158.288 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:39:18.732Z,1428007158.732 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:39:19.205Z,1428007159.205 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:39:19.638Z,1428007159.638 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:39:19.678Z,1428007159.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:39:20.104Z,1428007160.104 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:39:20.118Z,1428007160.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:39:20.524Z,1428007160.524 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:39:20.980Z,1428007160.980 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:39:21.400Z,1428007161.400 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:39:21.486Z,1428007161.486 [BPC1](DEBUG): Received data from all battery sticks
2015-04-02T20:39:21.897Z,1428007161.897 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:39:22.330Z,1428007162.330 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:39:22.806Z,1428007162.806 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:39:23.239Z,1428007163.239 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:39:23.696Z,1428007163.696 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:39:24.118Z,1428007164.118 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:39:24.574Z,1428007164.574 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:39:24.994Z,1428007164.994 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:39:25.451Z,1428007165.451 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:39:25.881Z,1428007165.881 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:39:25.912Z,1428007165.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:39:26.324Z,1428007166.324 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:39:26.349Z,1428007166.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:39:26.761Z,1428007166.761 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:39:27.246Z,1428007167.246 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:39:27.686Z,1428007167.686 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:39:27.796Z,1428007167.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:39:28.171Z,1428007168.171 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:39:28.184Z,1428007168.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:39:28.596Z,1428007168.596 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:39:29.092Z,1428007169.092 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:39:29.565Z,1428007169.565 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:39:30.019Z,1428007170.019 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:39:30.435Z,1428007170.435 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:39:30.903Z,1428007170.903 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:39:31.360Z,1428007171.360 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:39:31.821Z,1428007171.821 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:39:32.254Z,1428007172.254 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:39:32.286Z,1428007172.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:39:32.694Z,1428007172.694 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:39:32.718Z,1428007172.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:39:33.121Z,1428007173.121 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:39:33.583Z,1428007173.583 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:39:33.997Z,1428007173.997 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:39:34.435Z,1428007174.435 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:39:34.866Z,1428007174.866 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:39:34.897Z,1428007174.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:39:35.298Z,1428007175.298 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:39:35.337Z,1428007175.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:39:35.739Z,1428007175.739 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:39:36.227Z,1428007176.227 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:39:36.648Z,1428007176.648 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:39:37.101Z,1428007177.101 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:39:37.531Z,1428007177.531 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:39:37.564Z,1428007177.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:39:37.987Z,1428007177.987 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:39:38.001Z,1428007178.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:39:38.411Z,1428007178.411 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:39:38.871Z,1428007178.871 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:39:39.293Z,1428007179.293 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:39:39.325Z,1428007179.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:39:39.737Z,1428007179.737 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:39:39.788Z,1428007179.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:39:40.189Z,1428007180.189 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:39:40.690Z,1428007180.690 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:39:41.127Z,1428007181.127 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:39:41.226Z,1428007181.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:39:41.636Z,1428007181.636 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:39:41.665Z,1428007181.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:39:42.058Z,1428007182.058 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:39:42.533Z,1428007182.533 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:39:42.998Z,1428007182.998 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:39:43.439Z,1428007183.439 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:39:43.872Z,1428007183.872 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:39:44.344Z,1428007184.344 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:39:44.753Z,1428007184.753 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2015-04-02T20:39:44.761Z,1428007184.761 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:39:44.843Z,1428007184.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:39:45.245Z,1428007185.245 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:39:45.276Z,1428007185.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:39:45.698Z,1428007185.698 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:39:46.131Z,1428007186.131 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:39:46.593Z,1428007186.593 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:39:46.626Z,1428007186.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:39:47.049Z,1428007187.049 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:39:47.063Z,1428007187.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:39:47.473Z,1428007187.473 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:39:47.941Z,1428007187.941 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:39:48.404Z,1428007188.404 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:39:48.484Z,1428007188.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:39:48.919Z,1428007188.919 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:39:48.964Z,1428007188.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:39:49.360Z,1428007189.360 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:39:49.849Z,1428007189.849 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:39:50.289Z,1428007190.289 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:39:50.742Z,1428007190.742 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:39:51.168Z,1428007191.168 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:39:51.201Z,1428007191.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:39:51.624Z,1428007191.624 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:39:51.638Z,1428007191.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:39:52.044Z,1428007192.044 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:39:52.517Z,1428007192.517 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:39:52.941Z,1428007192.941 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:39:53.035Z,1428007193.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:39:53.434Z,1428007193.434 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:39:53.513Z,1428007193.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:39:53.911Z,1428007193.911 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:39:54.386Z,1428007194.386 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:39:54.808Z,1428007194.808 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:39:55.309Z,1428007195.309 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:39:55.722Z,1428007195.722 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:39:56.206Z,1428007196.206 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:39:56.655Z,1428007196.655 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:39:57.120Z,1428007197.120 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:39:57.548Z,1428007197.548 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:39:58.003Z,1428007198.003 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:39:58.422Z,1428007198.422 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:39:58.890Z,1428007198.890 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:39:59.327Z,1428007199.327 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:39:59.405Z,1428007199.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:39:59.820Z,1428007199.820 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:39:59.842Z,1428007199.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:40:00.270Z,1428007200.270 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:40:00.717Z,1428007200.717 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:40:01.146Z,1428007201.146 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:40:01.611Z,1428007201.611 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:40:02.056Z,1428007202.056 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:40:02.121Z,1428007202.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:40:02.540Z,1428007202.540 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:40:02.554Z,1428007202.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:40:02.961Z,1428007202.961 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:40:03.440Z,1428007203.440 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:40:03.866Z,1428007203.866 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:40:04.331Z,1428007204.331 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:40:04.772Z,1428007204.772 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:40:04.816Z,1428007204.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:40:05.217Z,1428007205.217 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:40:05.230Z,1428007205.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:40:05.650Z,1428007205.650 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:40:06.126Z,1428007206.126 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:40:06.578Z,1428007206.578 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:40:07.079Z,1428007207.079 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:40:07.500Z,1428007207.500 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:40:07.984Z,1428007207.984 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:40:08.414Z,1428007208.414 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:40:08.886Z,1428007208.886 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:40:09.339Z,1428007209.339 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:40:09.796Z,1428007209.796 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:40:10.221Z,1428007210.221 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:40:10.677Z,1428007210.677 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:40:11.127Z,1428007211.127 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:40:11.566Z,1428007211.566 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:40:11.999Z,1428007211.999 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:40:12.441Z,1428007212.441 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:40:12.868Z,1428007212.868 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:40:12.910Z,1428007212.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:40:13.329Z,1428007213.329 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:40:13.354Z,1428007213.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:40:13.768Z,1428007213.768 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:40:14.214Z,1428007214.214 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:40:14.631Z,1428007214.631 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:40:15.116Z,1428007215.116 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:40:15.557Z,1428007215.557 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:40:16.059Z,1428007216.059 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:40:16.518Z,1428007216.518 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:40:16.597Z,1428007216.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:40:16.978Z,1428007216.978 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:40:16.992Z,1428007216.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:40:17.407Z,1428007217.407 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:40:17.864Z,1428007217.864 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:40:18.301Z,1428007218.300 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:40:18.344Z,1428007218.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:40:18.758Z,1428007218.758 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:40:18.786Z,1428007218.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:40:19.190Z,1428007219.190 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:40:19.663Z,1428007219.663 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:40:20.148Z,1428007220.148 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:40:20.624Z,1428007220.624 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:40:21.069Z,1428007221.069 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:40:21.591Z,1428007221.591 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:40:22.018Z,1428007222.018 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:40:22.511Z,1428007222.511 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:40:22.970Z,1428007222.970 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:40:23.429Z,1428007223.429 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:40:23.853Z,1428007223.853 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:40:23.885Z,1428007223.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:40:24.307Z,1428007224.307 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:40:24.322Z,1428007224.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:40:24.731Z,1428007224.731 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:40:25.212Z,1428007225.212 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:40:25.644Z,1428007225.644 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:40:25.685Z,1428007225.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:40:26.101Z,1428007226.101 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:40:26.127Z,1428007226.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:40:26.533Z,1428007226.533 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:40:27.012Z,1428007227.012 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:40:27.435Z,1428007227.435 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:40:27.525Z,1428007227.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:40:27.936Z,1428007227.936 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:40:27.960Z,1428007227.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:40:28.370Z,1428007228.370 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:40:28.809Z,1428007228.809 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:40:29.246Z,1428007229.246 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:40:29.299Z,1428007229.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:40:29.706Z,1428007229.706 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:40:29.736Z,1428007229.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:40:30.124Z,1428007230.124 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:40:30.564Z,1428007230.564 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:40:30.996Z,1428007230.996 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:40:31.063Z,1428007231.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:40:31.461Z,1428007231.461 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:40:31.474Z,1428007231.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:40:31.890Z,1428007231.890 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:40:32.395Z,1428007232.395 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:40:32.819Z,1428007232.819 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:40:33.280Z,1428007233.280 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:40:33.749Z,1428007233.749 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:40:34.205Z,1428007234.205 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:40:34.639Z,1428007234.639 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:40:35.115Z,1428007235.115 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:40:35.547Z,1428007235.547 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:40:36.028Z,1428007236.028 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:40:36.513Z,1428007236.513 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:40:37.022Z,1428007237.022 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:40:37.466Z,1428007237.466 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:40:37.935Z,1428007237.935 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:40:38.384Z,1428007238.384 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:40:38.837Z,1428007238.837 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:40:39.266Z,1428007239.266 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:40:39.319Z,1428007239.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:40:39.730Z,1428007239.730 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:40:39.743Z,1428007239.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:40:40.160Z,1428007240.160 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:40:40.600Z,1428007240.600 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:40:41.032Z,1428007241.032 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:40:41.088Z,1428007241.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:40:41.493Z,1428007241.493 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:40:41.521Z,1428007241.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:40:41.917Z,1428007241.917 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:40:42.367Z,1428007242.367 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:40:42.795Z,1428007242.795 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:40:43.243Z,1428007243.243 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:40:43.673Z,1428007243.673 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:40:43.705Z,1428007243.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:40:44.117Z,1428007244.117 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:40:44.143Z,1428007244.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:40:44.549Z,1428007244.549 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:40:45.050Z,1428007245.050 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:40:45.491Z,1428007245.491 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2015-04-02T20:40:45.500Z,1428007245.500 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:40:45.971Z,1428007245.971 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:40:46.404Z,1428007246.404 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:40:46.873Z,1428007246.873 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:40:46.891Z,1428007246.891 [BPC1](ERROR): A bank expecting battery number:1 and read number: uart read:X
$S,01,270F,02,00,04,49%2A
$C1,01,7F,02,00,03,7F,04,00,05,00,06,00,07,00%72
$B11,0A,FFF8%4D
$B12,0A,0000%30
$B13,0A,0000%31
$B14,0A,FFFB%32
$B15,0A,0000%37
$B16,0A,0000%34
$B17,0A,0000%35
$S,01,270F,02,00,04,49%2A
$C1,01,7F,02,00,03,7F,04,00,05,00,06,00,07,00%72
$B11,02,000A,01,02A8,03,0001,08,0B56,09,3CCC,0A,FFF8,0B,FFF8%4A
$B11,0C,0001,0D,004C,0E,0046,0F,1272,10,18D6,11,8A57,12,8A57%4D
$B11,13,FFFF,14,0BB8,15,41A0,16,00C0,17,0002,18,1A90,19,3840%3A
$B11,1A,0031,1B,458B,1C,0091%42
$B12,02,000A,01,02A8,03,0001,08,0B3F,09,3C25,0A,0000,0B,0000%38
$B12,0C,0001,0D,0046,0E,0040,0F,10FB,10,1899,11,FFFF,12,FFFF%4C
$B12,13,FFFF,14,0BB8,15,41A0,16,00C0,17,0002,18,1A90,19,3840%39
$B12,1A,0031,1B,458F,1C,0153%4A
$B13,02,000A,01,02A8,03,0001,08,0B61,09,3C7E,0A,0000,0B,0000%3E
$B13,0C,0001,0D,0048,0E,0043,0F,11A5,10,189C,11,FFFF,12,FFFF%4B
$B13,13,FFFF,14,0BB8,15,41A0,16,00C0,17,0002,18,1A90,19,3840%38
$B13,1A,0031,1B,458B,1C,00AF%4F
$B14,02,000A,01,02A8,03,0001,08,0B4E,09,3CC6,0A,FFFB,0B,FFFB%48
$B14,0C,0001,0D,004B,0E,0048,0F,1314,10,1975,11,E4F0,12,E4F0%37
$B14,13,FFFF,14,0BB8,15,41A0,16,00C0,17,0002,18,1A90,19,3840%3F
$B14,1A,0031,1B,458F,1C,0151%4E
$B15,02,000A,01,02A8,03,0001,08,0B3F,09,3CAF,0A,0000,0B,0000%3F
$B15,0C,0001,0D,004B,0E,0048,0F,12F3,10,1989,11,FFFF,12,FFFF%44
$B15,13,FFFF,14,0BB8,15,41A0,16,00C0,17,0002,18,1A90,19,3840%3E
$B15,1A,0031,1B,458C,1C,00DC%48
$B16,02,000A,01,02A8,03,0001,08,0B55,09,3C78,0A,0000,0B,0000%41
$B16,0C,0001,0D,0048,0E,0044,0F,11FB,10,1905,11,FFFF,12,FFFF%47
$B16,13,FFFF,14,0BB8,15,41A0,16,00C0,17,0003,18,1A90,19,3840%3C
$B16,1A,0031,1B,458B,1C,00BA%4E
$B17,02,000A,01,02A8,03,0001,08,0B4A,09,3C79,0A,0000,0B,0000%34
$B17,0C,0001,0D,0049,0E,0044,0F,11F9,10,18F1,11,FFFF,12,FFFF%4F
$B17,13,FFFF,14,0BB8,15,41A0,16,00C0,17,0002,18,1A90,19,3840%3C
$B17,1A,0031,1B,458C,1C,00DA%48
458B,1C,008E%31
$B18,02,000A,01,02A8,03,0001,08,0B59,09,3BEE,0A,0000,0B,0000%4D
$B18,0C,0001,0D,0047,0E,0044,0F,11CD,10,19F5,11,FFFF,12,FFFF%33
$B18,13,FFFF,14,0BB8,15,41A0,16,00C0,17,0003,18,1A90,19,3840%32
$B18,1A,0031,1B,458B,1C,00AC%41

2015-04-02T20:40:46.891Z,1428007246.891 [BPC1](ERROR): Failed to parse bank A battery data
2015-04-02T20:40:46.892Z,1428007246.892 [BPC1] Data Fault, FailCount= 1
2015-04-02T20:40:46.892Z,1428007246.892 [BPC1](ERROR): Data Fault
2015-04-02T20:40:46.914Z,1428007246.914 [CBIT](ERROR): Data Fault in component: BPC1
2015-04-02T20:40:47.318Z,1428007247.318 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:40:47.772Z,1428007247.772 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:40:48.215Z,1428007248.215 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:40:48.349Z,1428007248.349 [CBIT](INFO): Clearing failed state for component BPC1
2015-04-02T20:40:48.349Z,1428007248.349 [BPC1] No Fault, FailCount= 1
2015-04-02T20:40:48.727Z,1428007248.727 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:40:49.225Z,1428007249.225 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:40:49.328Z,1428007249.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:40:49.733Z,1428007249.733 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:40:49.783Z,1428007249.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:40:50.190Z,1428007250.190 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:40:50.655Z,1428007250.655 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:40:51.092Z,1428007251.092 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:40:51.153Z,1428007251.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:40:51.556Z,1428007251.556 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:40:51.585Z,1428007251.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:40:51.985Z,1428007251.985 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:40:52.054Z,1428007252.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 2 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:40:52.438Z,1428007252.438 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:40:52.451Z,1428007252.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 3 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:40:52.884Z,1428007252.884 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:40:53.331Z,1428007253.331 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:40:53.803Z,1428007253.803 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:40:53.874Z,1428007253.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:40:54.268Z,1428007254.268 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:40:54.282Z,1428007254.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:40:54.698Z,1428007254.698 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:40:55.147Z,1428007255.147 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:40:55.570Z,1428007255.570 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:40:55.631Z,1428007255.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:40:56.043Z,1428007256.043 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:40:56.066Z,1428007256.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:40:56.472Z,1428007256.472 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:40:56.932Z,1428007256.932 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:40:57.362Z,1428007257.362 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:40:57.815Z,1428007257.815 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:40:58.263Z,1428007258.263 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:40:58.759Z,1428007258.759 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:40:59.196Z,1428007259.196 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:40:59.251Z,1428007259.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:40:59.674Z,1428007259.674 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:40:59.688Z,1428007259.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:41:00.097Z,1428007260.097 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:41:00.598Z,1428007260.598 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:41:01.028Z,1428007261.028 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:41:01.503Z,1428007261.503 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:41:01.920Z,1428007261.920 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:41:02.417Z,1428007262.417 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:41:02.858Z,1428007262.858 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:41:03.351Z,1428007263.351 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:41:03.843Z,1428007263.843 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:41:03.875Z,1428007263.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:41:04.288Z,1428007264.288 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:41:04.302Z,1428007264.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:41:04.717Z,1428007264.717 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:41:05.221Z,1428007265.221 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:41:05.654Z,1428007265.654 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:41:06.107Z,1428007266.107 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:41:06.540Z,1428007266.540 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:41:06.992Z,1428007266.992 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:41:07.445Z,1428007267.445 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:41:07.914Z,1428007267.914 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:41:08.371Z,1428007268.371 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:41:08.804Z,1428007268.804 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:41:09.248Z,1428007269.248 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:41:09.716Z,1428007269.716 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:41:10.154Z,1428007270.154 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:41:10.614Z,1428007270.614 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:41:11.055Z,1428007271.055 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:41:11.135Z,1428007271.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:41:11.531Z,1428007271.531 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:41:11.545Z,1428007271.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:41:11.961Z,1428007271.961 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:41:12.417Z,1428007272.417 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:41:12.837Z,1428007272.837 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:41:12.891Z,1428007272.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:41:13.290Z,1428007273.290 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:41:13.304Z,1428007273.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:41:13.726Z,1428007273.726 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:41:14.204Z,1428007274.204 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:41:14.626Z,1428007274.626 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:41:15.074Z,1428007275.074 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:41:15.534Z,1428007275.534 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:41:15.565Z,1428007275.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:41:15.978Z,1428007275.978 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:41:16.039Z,1428007276.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:41:19.300Z,1428007279.300 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:41:19.790Z,1428007279.790 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:41:20.249Z,1428007280.249 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:41:20.717Z,1428007280.717 [DataOverHttps](INFO): setting available, lastComms_.elapsed()=0.002606
2015-04-02T20:41:20.726Z,1428007280.726 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:41:21.165Z,1428007281.165 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:41:21.212Z,1428007281.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:41:21.647Z,1428007281.647 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:41:21.660Z,1428007281.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:41:22.068Z,1428007282.068 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:41:22.536Z,1428007282.536 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:41:22.971Z,1428007282.971 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:41:23.021Z,1428007283.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:41:23.418Z,1428007283.418 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:41:23.431Z,1428007283.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:41:23.858Z,1428007283.858 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:41:23.893Z,1428007283.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 2 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:41:24.315Z,1428007284.315 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:41:24.329Z,1428007284.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 3 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:41:24.735Z,1428007284.735 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:41:25.221Z,1428007285.221 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:41:25.641Z,1428007285.641 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:41:25.685Z,1428007285.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:41:26.093Z,1428007286.093 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:41:26.106Z,1428007286.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:41:26.527Z,1428007286.527 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:41:26.984Z,1428007286.984 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:41:27.404Z,1428007287.404 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:41:27.451Z,1428007287.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:41:27.848Z,1428007287.848 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:41:27.862Z,1428007287.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:41:28.269Z,1428007288.269 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:41:28.726Z,1428007288.726 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:41:29.158Z,1428007289.158 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:41:29.208Z,1428007289.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:41:29.611Z,1428007289.611 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:41:29.625Z,1428007289.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:41:30.037Z,1428007290.037 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:41:30.490Z,1428007290.490 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:41:30.913Z,1428007290.913 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:41:30.981Z,1428007290.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:41:31.396Z,1428007291.396 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:41:31.449Z,1428007291.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:41:31.851Z,1428007291.851 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:41:31.875Z,1428007291.875 [NAL9602](INFO): SBD MO Status=2, MOMSN=51955, MT Status=2, MTMSN=0
2015-04-02T20:41:31.875Z,1428007291.875 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2015-04-02T20:41:32.306Z,1428007292.306 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:41:32.764Z,1428007292.764 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:41:32.812Z,1428007292.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:41:33.213Z,1428007293.213 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:41:33.276Z,1428007293.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:41:33.673Z,1428007293.673 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:41:34.142Z,1428007294.142 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:41:34.608Z,1428007294.608 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:41:35.083Z,1428007295.083 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:41:35.514Z,1428007295.514 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:41:35.966Z,1428007295.966 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:41:36.390Z,1428007296.390 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:41:36.868Z,1428007296.868 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:41:37.339Z,1428007297.339 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:41:37.825Z,1428007297.825 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:41:38.239Z,1428007298.239 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:41:38.291Z,1428007298.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:41:38.693Z,1428007298.693 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:41:38.707Z,1428007298.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:41:39.122Z,1428007299.122 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:41:39.585Z,1428007299.585 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:41:40.041Z,1428007300.041 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:41:40.512Z,1428007300.512 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:41:40.953Z,1428007300.953 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:41:41.425Z,1428007301.425 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:41:41.854Z,1428007301.854 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:41:41.886Z,1428007301.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:41:42.307Z,1428007302.307 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:41:42.321Z,1428007302.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:41:42.740Z,1428007302.740 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:41:43.196Z,1428007303.196 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:41:43.629Z,1428007303.629 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:41:43.696Z,1428007303.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:41:44.094Z,1428007304.094 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:41:44.107Z,1428007304.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:41:44.526Z,1428007304.526 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:41:44.985Z,1428007304.985 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:41:45.408Z,1428007305.408 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:41:45.465Z,1428007305.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:41:45.876Z,1428007305.876 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:41:45.927Z,1428007305.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:41:46.329Z,1428007306.329 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:41:46.823Z,1428007306.823 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:41:47.247Z,1428007307.247 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:41:47.337Z,1428007307.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:41:47.731Z,1428007307.731 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:41:47.745Z,1428007307.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:41:48.165Z,1428007308.165 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:41:48.279Z,1428007308.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 2 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:41:48.685Z,1428007308.685 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:41:48.737Z,1428007308.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 3 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:41:49.137Z,1428007309.137 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:41:49.200Z,1428007309.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 4 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:41:49.624Z,1428007309.624 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:41:49.637Z,1428007309.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 5 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:41:50.043Z,1428007310.043 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:41:50.504Z,1428007310.504 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:41:50.928Z,1428007310.928 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:41:51.386Z,1428007311.386 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:41:51.806Z,1428007311.806 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:41:52.284Z,1428007312.284 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:41:52.718Z,1428007312.718 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:41:53.196Z,1428007313.196 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:41:53.608Z,1428007313.608 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:41:54.077Z,1428007314.077 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:41:54.510Z,1428007314.510 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:41:54.561Z,1428007314.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:41:54.974Z,1428007314.974 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:41:55.003Z,1428007315.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:41:55.398Z,1428007315.398 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:41:55.850Z,1428007315.850 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:41:56.272Z,1428007316.272 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:41:56.729Z,1428007316.729 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:41:57.210Z,1428007317.210 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:41:57.289Z,1428007317.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:41:57.708Z,1428007317.708 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:41:57.721Z,1428007317.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:41:58.127Z,1428007318.127 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:41:58.596Z,1428007318.596 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:41:59.017Z,1428007319.017 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:41:59.057Z,1428007319.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:41:59.470Z,1428007319.470 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:41:59.506Z,1428007319.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:41:59.891Z,1428007319.891 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:42:00.335Z,1428007320.335 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:42:00.788Z,1428007320.788 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:42:00.886Z,1428007320.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:42:01.279Z,1428007321.279 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:42:01.322Z,1428007321.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:42:01.725Z,1428007321.725 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:42:02.234Z,1428007322.234 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:42:02.655Z,1428007322.655 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:42:02.741Z,1428007322.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:42:03.123Z,1428007323.123 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:42:03.178Z,1428007323.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:42:03.576Z,1428007323.576 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:42:04.045Z,1428007324.045 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:42:04.477Z,1428007324.477 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:42:04.541Z,1428007324.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:42:04.938Z,1428007324.938 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:42:04.951Z,1428007324.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:42:05.364Z,1428007325.364 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:42:05.817Z,1428007325.817 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:42:06.240Z,1428007326.240 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:42:06.294Z,1428007326.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:42:06.697Z,1428007326.697 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:42:06.725Z,1428007326.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:42:07.122Z,1428007327.122 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:42:07.575Z,1428007327.575 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:42:07.995Z,1428007327.995 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:42:08.045Z,1428007328.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:42:08.459Z,1428007328.459 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:42:08.484Z,1428007328.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:42:08.891Z,1428007328.891 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:42:09.361Z,1428007329.361 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:42:09.830Z,1428007329.830 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:42:09.914Z,1428007329.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:42:10.328Z,1428007330.328 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:42:10.361Z,1428007330.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:42:10.771Z,1428007330.771 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:42:10.815Z,1428007330.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 2 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:42:11.237Z,1428007331.237 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:42:11.250Z,1428007331.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 3 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:42:11.660Z,1428007331.660 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:42:12.129Z,1428007332.129 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:42:12.562Z,1428007332.562 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:42:12.615Z,1428007332.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:42:13.023Z,1428007333.023 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:42:13.056Z,1428007333.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:42:13.447Z,1428007333.447 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:42:13.902Z,1428007333.902 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:42:14.346Z,1428007334.346 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:42:14.421Z,1428007334.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:42:14.833Z,1428007334.833 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:42:14.858Z,1428007334.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:42:15.266Z,1428007335.266 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:42:15.791Z,1428007335.791 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:42:16.227Z,1428007336.227 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:42:16.315Z,1428007336.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:42:19.574Z,1428007339.574 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:42:19.611Z,1428007339.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:42:20.008Z,1428007340.008 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:42:20.518Z,1428007340.518 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:42:20.969Z,1428007340.969 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:42:21.415Z,1428007341.415 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:42:21.836Z,1428007341.836 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:42:21.895Z,1428007341.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:42:22.301Z,1428007342.301 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:42:22.327Z,1428007342.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:42:22.737Z,1428007342.737 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:42:22.828Z,1428007342.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 2 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:42:23.230Z,1428007343.230 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:42:23.255Z,1428007343.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 3 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:42:23.655Z,1428007343.655 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:42:24.172Z,1428007344.172 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:42:24.612Z,1428007344.612 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:42:24.653Z,1428007344.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:42:25.078Z,1428007345.078 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:42:25.092Z,1428007345.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:42:25.498Z,1428007345.498 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:42:25.967Z,1428007345.967 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:42:26.404Z,1428007346.404 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:42:26.843Z,1428007346.843 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:42:27.269Z,1428007347.269 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:42:27.725Z,1428007347.725 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:42:28.158Z,1428007348.158 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:42:28.636Z,1428007348.636 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:42:29.079Z,1428007349.079 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:42:29.164Z,1428007349.164 [Default:UpdateAndReportMinutesSinceMissionStarted] Running Loop=1
2015-04-02T20:42:29.164Z,1428007349.164 [Default:UpdateAndReportMinutesSinceMissionStarted](INFO): Aggregate::initialize Default:UpdateAndReportMinutesSinceMissionStarted
2015-04-02T20:42:29.165Z,1428007349.165 [Default:UpdateAndReportMinutesSinceMissionStarted:A] Running Loop=1
2015-04-02T20:42:29.165Z,1428007349.165 [Default:UpdateAndReportMinutesSinceMissionStarted:A] Stopped
2015-04-02T20:42:29.165Z,1428007349.165 [Default:UpdateAndReportMinutesSinceMissionStarted:B] Running Loop=1
2015-04-02T20:42:29.576Z,1428007349.576 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:42:29.608Z,1428007349.608 [Default:UpdateAndReportMinutesSinceMissionStarted:B](IMPORTANT): Default mission has been running for 21.861449 min 
2015-04-02T20:42:29.608Z,1428007349.608 [Default:UpdateAndReportMinutesSinceMissionStarted:B] Stopped
2015-04-02T20:42:29.608Z,1428007349.608 [Default:UpdateAndReportMinutesSinceMissionStarted](INFO): Completed Default:UpdateAndReportMinutesSinceMissionStarted
2015-04-02T20:42:29.608Z,1428007349.608 [Default:UpdateAndReportMinutesSinceMissionStarted] Stopped
2015-04-02T20:42:29.608Z,1428007349.608 [Default:UpdateAndReportMinutesSinceMissionStarted](INFO): Aggregate::uninitialize Default:UpdateAndReportMinutesSinceMissionStarted
2015-04-02T20:42:30.013Z,1428007350.013 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:42:30.084Z,1428007350.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:42:30.489Z,1428007350.489 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:42:30.512Z,1428007350.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:42:30.942Z,1428007350.942 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:42:31.408Z,1428007351.408 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:42:31.831Z,1428007351.831 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:42:32.292Z,1428007352.292 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:42:32.785Z,1428007352.785 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:42:33.263Z,1428007353.263 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:42:33.739Z,1428007353.739 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:42:34.195Z,1428007354.195 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:42:34.248Z,1428007354.248 [Default:CheckIn:Read_GPS](INFO): Timed out from 2015-04-02T20:37:33.0Z
2015-04-02T20:42:34.248Z,1428007354.248 [Default:CheckIn:Read_GPS] Stopped
2015-04-02T20:42:34.249Z,1428007354.249 [Default:CheckIn:Read_Iridium] Running Loop=1
2015-04-02T20:42:34.656Z,1428007354.656 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:42:35.347Z,1428007355.347 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:42:35.782Z,1428007355.782 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:42:39.102Z,1428007359.102 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:42:39.523Z,1428007359.523 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20150402T201714/Courier0020.lzma
2015-04-02T20:42:39.532Z,1428007359.532 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:42:39.577Z,1428007359.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:42:39.992Z,1428007359.992 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:42:40.006Z,1428007360.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:42:40.411Z,1428007360.411 [DataOverHttps](INFO): Moved sent file to Logs/20150402T201714/Courier0020.lzma.bak
2015-04-02T20:42:40.411Z,1428007360.411 [DataOverHttps](INFO): SBD MOMSN=3101147
2015-04-02T20:42:40.435Z,1428007360.435 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:42:40.947Z,1428007360.947 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:42:41.372Z,1428007361.372 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:42:41.414Z,1428007361.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:42:44.860Z,1428007364.860 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:42:44.901Z,1428007364.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:42:45.317Z,1428007365.317 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:42:45.818Z,1428007365.818 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:42:46.246Z,1428007366.246 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:42:46.289Z,1428007366.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:42:46.712Z,1428007366.712 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:42:46.793Z,1428007366.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:42:47.196Z,1428007367.196 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:42:50.495Z,1428007370.495 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:42:50.498Z,1428007370.498 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2015-04-02T20:42:50.960Z,1428007370.960 [DataOverHttps](INFO): Sending 384 bytes from file Logs/20150402T201714/Express0021.lzma
2015-04-02T20:42:50.981Z,1428007370.981 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:42:51.430Z,1428007371.430 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:42:51.884Z,1428007371.884 [DataOverHttps](INFO): Moved sent file to Logs/20150402T201714/Express0021.lzma.bak
2015-04-02T20:42:51.885Z,1428007371.885 [DataOverHttps](INFO): SBD MOMSN=3101149
2015-04-02T20:42:51.895Z,1428007371.895 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:42:51.975Z,1428007371.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:42:52.459Z,1428007372.459 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:42:52.481Z,1428007372.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:42:52.487Z,1428007372.487 [Default:CheckIn:Read_Iridium] Stopped
2015-04-02T20:42:52.487Z,1428007372.487 [Default:CheckIn](INFO): Completed Default:CheckIn
2015-04-02T20:42:52.487Z,1428007372.487 [Default:CheckIn] Stopped
2015-04-02T20:42:52.487Z,1428007372.487 [Default:CheckIn](INFO): Aggregate::uninitialize Default:CheckIn
2015-04-02T20:42:52.488Z,1428007372.488 [Default:CheckIn:A.SetSpeed] Stopped
2015-04-02T20:42:52.488Z,1428007372.488 [Default:CheckIn:A.SetSpeed](DEBUG): Uninitialize.
2015-04-02T20:42:52.900Z,1428007372.900 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:43:00.906Z,1428007380.906 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:43:00.908Z,1428007380.908 [NAL9602](INFO): Powering down
2015-04-02T20:43:02.848Z,1428007382.848 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:43:07.839Z,1428007387.839 [Depth_Keller](ERROR): Pressure reading out of range: 1830.839966 decibar
2015-04-02T20:43:07.840Z,1428007387.840 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:43:12.843Z,1428007392.843 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:43:17.834Z,1428007397.834 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:43:22.838Z,1428007402.838 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:43:27.832Z,1428007407.832 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:43:32.838Z,1428007412.838 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:43:37.843Z,1428007417.843 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:43:42.843Z,1428007422.843 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:43:47.840Z,1428007427.840 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:43:52.842Z,1428007432.842 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:43:57.846Z,1428007437.846 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:44:05.716Z,1428007445.716 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:44:07.850Z,1428007447.850 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:44:12.849Z,1428007452.849 [Depth_Keller](ERROR): Pressure reading out of range: 1830.840820 decibar
2015-04-02T20:44:12.850Z,1428007452.850 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:44:17.832Z,1428007457.832 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:44:22.840Z,1428007462.840 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:44:27.839Z,1428007467.839 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:44:32.839Z,1428007472.839 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:44:37.839Z,1428007477.839 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:44:42.838Z,1428007482.838 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:44:47.838Z,1428007487.838 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:44:52.870Z,1428007492.870 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:44:57.842Z,1428007497.842 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:45:05.703Z,1428007505.703 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:45:07.839Z,1428007507.839 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:45:12.844Z,1428007512.844 [Depth_Keller](ERROR): Pressure reading out of range: 1830.819824 decibar
2015-04-02T20:45:12.846Z,1428007512.846 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:45:17.841Z,1428007517.841 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:45:22.836Z,1428007522.836 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:45:27.839Z,1428007527.839 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:45:32.840Z,1428007532.840 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:45:37.836Z,1428007537.836 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:45:42.843Z,1428007542.843 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:45:47.846Z,1428007547.846 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:45:52.845Z,1428007552.845 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:45:52.929Z,1428007552.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:45:57.844Z,1428007557.844 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:45:57.858Z,1428007557.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:46:02.855Z,1428007562.855 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:46:10.695Z,1428007570.695 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:46:12.848Z,1428007572.848 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:46:17.837Z,1428007577.837 [Depth_Keller](ERROR): Pressure reading out of range: 1830.856445 decibar
2015-04-02T20:46:17.839Z,1428007577.839 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:46:22.847Z,1428007582.847 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:46:27.859Z,1428007587.859 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:46:32.837Z,1428007592.837 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:46:37.841Z,1428007597.841 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:46:42.845Z,1428007602.845 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:46:42.943Z,1428007602.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:46:47.855Z,1428007607.855 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:46:47.901Z,1428007607.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:46:52.844Z,1428007612.844 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:46:57.844Z,1428007617.844 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:47:02.856Z,1428007622.856 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:47:10.684Z,1428007630.684 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:47:12.847Z,1428007632.847 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:47:17.838Z,1428007637.838 [Depth_Keller](ERROR): Pressure reading out of range: 1830.899292 decibar
2015-04-02T20:47:17.840Z,1428007637.840 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:47:22.847Z,1428007642.847 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:47:27.842Z,1428007647.842 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:47:32.838Z,1428007652.838 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:47:32.882Z,1428007652.882 [BPC1](DEBUG): Received data from all battery sticks
2015-04-02T20:47:32.920Z,1428007652.920 [Default:UpdateAndReportMinutesSinceMissionStarted] Running Loop=1
2015-04-02T20:47:32.920Z,1428007652.920 [Default:UpdateAndReportMinutesSinceMissionStarted](INFO): Aggregate::initialize Default:UpdateAndReportMinutesSinceMissionStarted
2015-04-02T20:47:32.920Z,1428007652.920 [Default:UpdateAndReportMinutesSinceMissionStarted:A] Running Loop=1
2015-04-02T20:47:32.925Z,1428007652.925 [Default:UpdateAndReportMinutesSinceMissionStarted:A] Stopped
2015-04-02T20:47:32.925Z,1428007652.925 [Default:UpdateAndReportMinutesSinceMissionStarted:B] Running Loop=1
2015-04-02T20:47:32.943Z,1428007652.943 [CBIT](DEBUG): EFC running - data check-sum false
2015-04-02T20:47:37.838Z,1428007657.838 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:47:37.857Z,1428007657.857 [Default:UpdateAndReportMinutesSinceMissionStarted:B](IMPORTANT): Default mission has been running for 26.924675 min 
2015-04-02T20:47:37.857Z,1428007657.857 [Default:UpdateAndReportMinutesSinceMissionStarted:B] Stopped
2015-04-02T20:47:37.857Z,1428007657.857 [Default:UpdateAndReportMinutesSinceMissionStarted](INFO): Completed Default:UpdateAndReportMinutesSinceMissionStarted
2015-04-02T20:47:37.858Z,1428007657.858 [Default:UpdateAndReportMinutesSinceMissionStarted] Stopped
2015-04-02T20:47:37.858Z,1428007657.858 [Default:UpdateAndReportMinutesSinceMissionStarted](INFO): Aggregate::uninitialize Default:UpdateAndReportMinutesSinceMissionStarted
2015-04-02T20:47:42.839Z,1428007662.839 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:47:47.847Z,1428007667.847 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:47:52.842Z,1428007672.842 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:47:52.935Z,1428007672.935 [Default:CheckIn] Running Loop=1
2015-04-02T20:47:52.935Z,1428007672.935 [Default:CheckIn](INFO): Aggregate::initialize Default:CheckIn
2015-04-02T20:47:52.935Z,1428007672.935 [Default:CheckIn:A.SetSpeed] Running Loop=1
2015-04-02T20:47:52.935Z,1428007672.935 [Default:CheckIn:A.SetSpeed](DEBUG): Initialize.
2015-04-02T20:47:52.935Z,1428007672.935 [Default:CheckIn:Read_GPS] Running Loop=1
2015-04-02T20:47:53.319Z,1428007673.319 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:47:53.321Z,1428007673.321 [NAL9602](INFO): Powering up
2015-04-02T20:47:53.722Z,1428007673.722 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:47:54.195Z,1428007674.195 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:47:54.672Z,1428007674.672 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:47:54.735Z,1428007674.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:47:55.113Z,1428007675.113 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:47:55.126Z,1428007675.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:47:55.529Z,1428007675.529 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:47:55.990Z,1428007675.990 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:47:56.423Z,1428007676.423 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:47:56.486Z,1428007676.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:47:56.868Z,1428007676.868 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:47:56.881Z,1428007676.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:47:57.292Z,1428007677.292 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:47:57.761Z,1428007677.761 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:47:58.194Z,1428007678.194 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:47:58.250Z,1428007678.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:47:58.647Z,1428007678.647 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:47:58.660Z,1428007678.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:47:59.071Z,1428007679.071 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:48:02.387Z,1428007682.387 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:48:02.849Z,1428007682.849 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:48:03.299Z,1428007683.299 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:48:03.762Z,1428007683.762 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:48:04.257Z,1428007684.257 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:48:04.688Z,1428007684.688 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:48:04.723Z,1428007684.723 [NAL9602](INFO): NAL9602 initialized
2015-04-02T20:48:05.144Z,1428007685.144 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:48:05.589Z,1428007685.589 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:48:05.622Z,1428007685.622 [NAL9602](FAULT): GPS failed to acquire within timeout.
2015-04-02T20:48:05.623Z,1428007685.623 [NAL9602] Data Fault, FailCount= 3
2015-04-02T20:48:05.623Z,1428007685.623 [NAL9602](ERROR): Data Fault
2015-04-02T20:48:05.669Z,1428007685.669 [CBIT](ERROR): Data Fault in component: NAL9602
2015-04-02T20:48:06.063Z,1428007686.063 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:48:06.066Z,1428007686.066 [NAL9602](INFO): Powering down
2015-04-02T20:48:06.521Z,1428007686.521 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:48:06.554Z,1428007686.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:48:07.016Z,1428007687.016 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:48:07.059Z,1428007687.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:48:07.093Z,1428007687.093 [CBIT](INFO): Clearing failed state for component NAL9602
2015-04-02T20:48:07.093Z,1428007687.093 [NAL9602] No Fault, FailCount= 3
2015-04-02T20:48:07.473Z,1428007687.473 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:48:07.909Z,1428007687.909 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:48:08.385Z,1428007688.385 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:48:08.466Z,1428007688.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:48:08.878Z,1428007688.878 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:48:08.891Z,1428007688.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:48:09.299Z,1428007689.299 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:48:09.759Z,1428007689.759 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:48:10.196Z,1428007690.196 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:48:10.248Z,1428007690.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:48:10.640Z,1428007690.640 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:48:10.653Z,1428007690.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:48:11.049Z,1428007691.049 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:48:11.071Z,1428007691.071 [NAL9602](INFO): Powering up NAL9602
2015-04-02T20:48:11.510Z,1428007691.510 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:48:11.935Z,1428007691.935 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:48:12.371Z,1428007692.371 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:48:12.800Z,1428007692.800 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:48:13.241Z,1428007693.241 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:48:13.670Z,1428007693.670 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:48:14.111Z,1428007694.111 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:48:14.535Z,1428007694.535 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:48:14.000Z,1428007695.000 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:48:15.428Z,1428007695.428 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:48:15.488Z,1428007695.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:48:15.869Z,1428007695.869 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:48:15.891Z,1428007695.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:48:16.294Z,1428007696.294 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:48:16.755Z,1428007696.755 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:48:17.183Z,1428007697.183 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:48:17.637Z,1428007697.637 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:48:18.053Z,1428007698.053 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:48:18.517Z,1428007698.517 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:48:18.947Z,1428007698.947 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:48:18.980Z,1428007698.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:48:19.405Z,1428007699.405 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:48:19.445Z,1428007699.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:48:19.859Z,1428007699.859 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:48:20.368Z,1428007700.368 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:48:20.822Z,1428007700.822 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:48:20.855Z,1428007700.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:48:21.279Z,1428007701.279 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:48:21.317Z,1428007701.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:48:21.718Z,1428007701.718 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:48:22.207Z,1428007702.207 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:48:22.210Z,1428007702.210 [NAL9602](INFO): NAL9602 initialized
2015-04-02T20:48:22.667Z,1428007702.667 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:48:23.168Z,1428007703.168 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:48:23.637Z,1428007703.637 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:48:24.122Z,1428007704.122 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:48:24.559Z,1428007704.559 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:48:25.058Z,1428007705.058 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:48:25.484Z,1428007705.484 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:48:25.933Z,1428007705.933 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:48:26.373Z,1428007706.373 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:48:26.847Z,1428007706.847 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:48:27.283Z,1428007707.283 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:48:27.739Z,1428007707.739 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:48:28.164Z,1428007708.164 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:48:28.633Z,1428007708.633 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:48:29.061Z,1428007709.061 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:48:29.113Z,1428007709.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:48:29.514Z,1428007709.514 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:48:29.527Z,1428007709.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:48:29.935Z,1428007709.935 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:48:30.400Z,1428007710.400 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:48:30.857Z,1428007710.857 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:48:31.325Z,1428007711.325 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:48:31.778Z,1428007711.778 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:48:31.840Z,1428007711.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:48:32.238Z,1428007712.238 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:48:32.253Z,1428007712.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:48:32.643Z,1428007712.643 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:48:33.112Z,1428007713.112 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:48:33.544Z,1428007713.544 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:48:34.029Z,1428007714.029 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:48:34.450Z,1428007714.450 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:48:34.513Z,1428007714.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:48:34.910Z,1428007714.910 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:48:34.959Z,1428007714.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:48:35.369Z,1428007715.369 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:48:35.474Z,1428007715.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 2 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:48:35.869Z,1428007715.869 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:48:35.937Z,1428007715.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 3 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:48:36.338Z,1428007716.338 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:48:36.427Z,1428007716.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 4 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:48:36.837Z,1428007716.837 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:48:36.901Z,1428007716.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 5 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:48:37.318Z,1428007717.318 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:48:37.807Z,1428007717.807 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:48:38.232Z,1428007718.232 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:48:38.275Z,1428007718.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:48:38.677Z,1428007718.677 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:48:38.707Z,1428007718.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:48:39.109Z,1428007719.109 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:48:39.164Z,1428007719.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 2 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:48:39.570Z,1428007719.570 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:48:39.584Z,1428007719.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 3 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:48:39.000Z,1428007720.000 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:48:40.452Z,1428007720.452 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:48:40.908Z,1428007720.908 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:48:41.028Z,1428007721.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:48:41.421Z,1428007721.421 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:48:41.451Z,1428007721.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:48:41.870Z,1428007721.870 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:48:41.968Z,1428007721.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 2 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:48:42.387Z,1428007722.387 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:48:42.400Z,1428007722.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 3 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:48:42.811Z,1428007722.811 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:48:42.854Z,1428007722.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 4 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:48:43.283Z,1428007723.283 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:48:43.297Z,1428007723.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 5 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:48:43.700Z,1428007723.700 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:48:44.149Z,1428007724.149 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:48:44.583Z,1428007724.583 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:48:45.039Z,1428007725.039 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:48:45.459Z,1428007725.459 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:48:45.945Z,1428007725.945 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:48:46.384Z,1428007726.384 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:48:46.465Z,1428007726.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:48:46.869Z,1428007726.869 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:48:46.912Z,1428007726.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:48:47.322Z,1428007727.322 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:48:47.769Z,1428007727.769 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:48:48.199Z,1428007728.199 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:48:48.672Z,1428007728.672 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:48:49.089Z,1428007729.089 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:48:49.537Z,1428007729.537 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:48:50.012Z,1428007730.012 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:48:50.044Z,1428007730.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:48:50.464Z,1428007730.464 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:48:50.478Z,1428007730.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:48:50.883Z,1428007730.883 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:48:51.396Z,1428007731.396 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:48:51.853Z,1428007731.853 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:48:51.941Z,1428007731.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:48:52.344Z,1428007732.344 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:48:52.402Z,1428007732.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:48:52.834Z,1428007732.834 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:48:53.295Z,1428007733.295 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:48:53.725Z,1428007733.725 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:48:53.756Z,1428007733.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:48:54.178Z,1428007734.178 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:48:54.192Z,1428007734.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:48:54.601Z,1428007734.601 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:48:55.083Z,1428007735.083 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:48:55.513Z,1428007735.513 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:48:55.560Z,1428007735.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:48:55.999Z,1428007735.999 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:48:56.047Z,1428007736.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:48:56.452Z,1428007736.452 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:48:56.933Z,1428007736.933 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:48:57.393Z,1428007737.393 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:48:57.874Z,1428007737.874 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:48:58.304Z,1428007738.304 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:48:58.336Z,1428007738.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:48:58.757Z,1428007738.757 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:48:58.771Z,1428007738.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:48:59.176Z,1428007739.176 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:48:59.645Z,1428007739.645 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:49:00.074Z,1428007740.074 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:49:00.542Z,1428007740.542 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:49:00.971Z,1428007740.971 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:49:01.051Z,1428007741.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:49:01.460Z,1428007741.460 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:49:01.498Z,1428007741.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:49:01.917Z,1428007741.917 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:49:02.389Z,1428007742.389 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:49:02.839Z,1428007742.839 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:49:03.318Z,1428007743.318 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:49:03.756Z,1428007743.756 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:49:03.801Z,1428007743.801 [BPC1](ERROR): B bank expecting battery number:1 and read number: uart read:X
$S,01,270F,02,00,04,4A%52
$C1,01,FF,02,00,03,FF,04,00,05,00,06,00,07,00%72
$B11,0A,FFF8%4D
$B12,0A,FFFD%32
$B13,0A,0000%31
$B14,0A,FFFD%34
$B15,0A,0000%37
$B16,0A,0000%34
$B17,0A,0000%35
$B18,0A,0000%3A
$S,01,270F,02,00,04,49%2A
$C1,01,7F,02,00,03,7F,04,00,05,00,06,00,07,00%72
$B11,02,000A,01,02A8,03,0001,08,0B55,09,3CCD,0A,FFF7,0B,0003%3C
$B11,0C,0001,0D,004B,0E,0046,0F,1272,10,18D6,11,7AF8,12,FFFF%44
$B11,13,7FD0,14,0BB8,15,41A0,16,00C0,17,0002,18,1A90,19,3840%3F
$B11,1A,0031,1B,458B,1C,0091%42
$B12,02,000A,01,02A8,03,0001,08,0B3F,09,3C26,0A,0000,0B,0001%3A
$B12,0C,0001,0D,0046,0E,0040,0F,10FB,10,1899,11,FFFF,12,FFFF%4C
$B12,13,FFFF,14,0BB8,15,41A0,16,00C0,17,0002,18,1A90,19,3840%39
$B12,1A,0031,1B,458F,1C,0153%4A
$B13,02,000A,01,02A8,03,0001,08,0B61,09,3C7F,0A,0000,0B,0004%39
$B13,0C,0001,0D,0048,0E,0043,0F,11A5,10,189C,11,FFFF,12,FFFF%4B
$B13,13,6879,14,0BB8,15,41A0,16,00C0,17,0002,18,1A90,19,3840%38
$B13,1A,0031,1B,458B,1C,00AF%4F
$B14,02,000A,01,02A8,03,0001,08,0B4E,09,3CC6,0A,FFFB,0B,0003%4F
$B14,0C,0001,0D,004B,0E,0048,0F,1314,10,1975,11,E4F0,12,FFFF%30
$B14,13,7F94,14,0BB8,15,41A0,16,00C0,17,0002,18,1A90,19,3840%43
$B14,1A,0031,1B,458F,1C,0151%4E
$B15,02,000A,01,02A8,03,0001,08,0B3F,09,3CB0,0A,0000,0B,0004%4E
$B15,0C,0001,0D,004B,0E,0048,0F,12F3,10,1989,11,FFFF,12,FFFF%44
$B15,13,62CA,14,0BB8,15,41A0,16,00C0,17,0002,18,1A90,19,3840%38
$B15,1A,0031,1B,458C,1C,00DC%48
$B16,02,000A,01,02A8,03,0001,08,0B55,09,3C78,0A,0000,0B,0003%42
$B16,0C,0001,0D,0048,0E,0044,0F,11FB,10,1905,11,FFFF,12,FFFF%47
$B16,13,8CC8,14,0BB8,15,41A0,16,00C0,17,0003,18,1A90,19,3840%3C
$B16,1A,0031,1B,458B,1C,00BA%4E
$B17,02,000A,01,02A8,03,0001,08,0B4A,09,3C78,0A,0000,0B,0004%31
$B17,0C,0001,0D,0049,0E,0044,0F,11F9,10,18F1,11,FFFF,12,FFFF%4F
$B17,13,6888,14,0BB8,15,41A0,16,00C0,17,0002,18,1A90,19,3840%32
$B17,1A,0031,1B,458B,1C,008E%31
$B18,02,000A,01,02A8,03,0001,08,0B5A,09,3BF0,0A,0000,0B,0000%43
$B18,0C,0001,0D,0047,0E,0044,0F,11CD,10,19F5,11,FFFF,12,FFFF%33
$B18,13,FFFF,14,0BB8,15,41A0,16,00C0,17,0003,18,1A90,19,3840%32
$B18,1A,0031,1B,458B,1C,00AC%41

2015-04-02T20:49:03.802Z,1428007743.802 [BPC1](ERROR): Failed to parse bank B battery data
2015-04-02T20:49:03.802Z,1428007743.802 [BPC1] Data Fault, FailCount= 1
2015-04-02T20:49:03.802Z,1428007743.802 [BPC1](ERROR): Data Fault
2015-04-02T20:49:03.853Z,1428007743.853 [CBIT](ERROR): Data Fault in component: BPC1
2015-04-02T20:49:04.236Z,1428007744.236 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:49:04.653Z,1428007744.653 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:49:05.101Z,1428007745.101 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:49:05.155Z,1428007745.155 [CBIT](INFO): Clearing failed state for component BPC1
2015-04-02T20:49:05.155Z,1428007745.155 [BPC1] No Fault, FailCount= 1
2015-04-02T20:49:05.534Z,1428007745.534 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:49:05.653Z,1428007745.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:49:06.059Z,1428007746.059 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:49:06.099Z,1428007746.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:49:06.508Z,1428007746.508 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:49:06.956Z,1428007746.956 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:49:07.371Z,1428007747.371 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:49:07.414Z,1428007747.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:49:07.818Z,1428007747.818 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:49:07.831Z,1428007747.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:49:08.262Z,1428007748.262 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:49:08.750Z,1428007748.750 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:49:09.176Z,1428007749.176 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:49:09.632Z,1428007749.632 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:49:10.049Z,1428007750.049 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:49:10.511Z,1428007750.511 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:49:10.954Z,1428007750.954 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:49:11.038Z,1428007751.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:49:11.465Z,1428007751.465 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:49:11.498Z,1428007751.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:49:11.907Z,1428007751.907 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:49:12.401Z,1428007752.401 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:49:12.830Z,1428007752.830 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:49:12.878Z,1428007752.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:49:13.282Z,1428007753.282 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:49:13.296Z,1428007753.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:49:13.724Z,1428007753.724 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:49:14.179Z,1428007754.179 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:49:14.604Z,1428007754.604 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:49:15.061Z,1428007755.061 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:49:15.492Z,1428007755.492 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:49:15.523Z,1428007755.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:49:15.934Z,1428007755.934 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:49:15.959Z,1428007755.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:49:16.376Z,1428007756.376 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:49:16.849Z,1428007756.849 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:49:17.312Z,1428007757.312 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:49:17.761Z,1428007757.761 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:49:18.226Z,1428007758.226 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:49:18.283Z,1428007758.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:49:18.690Z,1428007758.690 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:49:18.753Z,1428007758.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:49:19.159Z,1428007759.159 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:49:19.624Z,1428007759.624 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:49:20.049Z,1428007760.049 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:49:20.529Z,1428007760.529 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:49:20.962Z,1428007760.962 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:49:21.403Z,1428007761.403 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:49:21.823Z,1428007761.823 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:49:22.272Z,1428007762.272 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:49:22.709Z,1428007762.709 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:49:23.178Z,1428007763.178 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:49:23.606Z,1428007763.606 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:49:24.083Z,1428007764.083 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:49:24.547Z,1428007764.547 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:49:25.036Z,1428007765.036 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:49:25.466Z,1428007765.466 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:49:25.915Z,1428007765.915 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:49:26.338Z,1428007766.338 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:49:26.807Z,1428007766.807 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:49:27.244Z,1428007767.244 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:49:27.705Z,1428007767.705 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:49:28.153Z,1428007768.153 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:49:28.602Z,1428007768.602 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2015-04-02T20:49:28.610Z,1428007768.610 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:49:29.035Z,1428007769.035 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:49:29.067Z,1428007769.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:49:29.484Z,1428007769.484 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:49:29.498Z,1428007769.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:49:29.908Z,1428007769.908 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:49:30.428Z,1428007770.428 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:49:30.858Z,1428007770.858 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:49:31.354Z,1428007771.354 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:49:31.757Z,1428007771.757 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:49:31.842Z,1428007771.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:49:32.251Z,1428007772.251 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:49:32.315Z,1428007772.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:49:32.724Z,1428007772.724 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:49:33.161Z,1428007773.161 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:49:33.582Z,1428007773.582 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:49:34.018Z,1428007774.018 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:49:34.439Z,1428007774.439 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:49:34.892Z,1428007774.892 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:49:35.336Z,1428007775.336 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:49:35.781Z,1428007775.781 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:49:36.203Z,1428007776.203 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:49:36.646Z,1428007776.646 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:49:37.075Z,1428007777.075 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:49:37.536Z,1428007777.536 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:49:37.956Z,1428007777.956 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:49:38.385Z,1428007778.385 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:49:38.815Z,1428007778.815 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:49:38.838Z,1428007778.838 [NAL9602](IMPORTANT): SBD MO Status=0, MOMSN=51955, MT Status=1, MTMSN=48
2015-04-02T20:49:38.838Z,1428007778.838 [NAL9602](INFO): Data available in MT queue
2015-04-02T20:49:39.278Z,1428007779.278 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:49:39.381Z,1428007779.381 [NAL9602](INFO): Received command:! ifconfig eth0
2015-04-02T20:49:39.421Z,1428007779.421 [CommandLine](IMPORTANT): got command ! ifconfig eth0
2015-04-02T20:49:39.573Z,1428007779.573 [CommandLine](IMPORTANT): eth0      Link encap:Ethernet  HWaddr 00:50:C2:8C:E7:DA  
          inet addr:192.168.0.111  Bcast:192.168.0.255  Mask:255.255.255.0
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:468 errors:0 dropped:0 overruns:0 frame:0
          TX packets:722 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:196026 (191.4 Kb)  TX bytes:97770 (95.4 Kb)
          Interrupt:29 


2015-04-02T20:49:39.844Z,1428007779.844 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:49:40.297Z,1428007780.297 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:49:40.741Z,1428007780.741 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:49:41.238Z,1428007781.238 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:49:41.666Z,1428007781.666 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:49:42.127Z,1428007782.127 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:49:42.548Z,1428007782.548 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:49:43.000Z,1428007783.000 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:49:43.437Z,1428007783.437 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:49:43.965Z,1428007783.965 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:49:44.426Z,1428007784.426 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:49:44.505Z,1428007784.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:49:44.903Z,1428007784.903 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:49:44.934Z,1428007784.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:49:45.335Z,1428007785.335 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:49:45.837Z,1428007785.837 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:49:46.326Z,1428007786.326 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:49:46.786Z,1428007786.786 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:49:47.223Z,1428007787.223 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:49:47.693Z,1428007787.693 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:49:48.124Z,1428007788.124 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:49:48.571Z,1428007788.571 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:49:48.994Z,1428007788.994 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:49:49.474Z,1428007789.474 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:49:49.915Z,1428007789.915 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:49:50.399Z,1428007790.399 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:49:50.819Z,1428007790.819 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:49:50.867Z,1428007790.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:49:51.273Z,1428007791.273 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:49:51.289Z,1428007791.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:49:51.690Z,1428007791.690 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:49:52.154Z,1428007792.154 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:49:52.591Z,1428007792.591 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:49:52.671Z,1428007792.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:49:53.076Z,1428007793.076 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:49:53.106Z,1428007793.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:49:53.517Z,1428007793.517 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:49:53.971Z,1428007793.971 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:49:54.394Z,1428007794.394 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:49:54.851Z,1428007794.851 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:49:55.295Z,1428007795.295 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:49:55.340Z,1428007795.340 [NAL9602](INFO): GPS fix at 20150402T204930: (36.802605, -121.787994)
2015-04-02T20:49:55.360Z,1428007795.360 [UniversalFixResidualReporter](IMPORTANT): Fix residual: 9.1 %DT, over the last 1277.5 m. Residual distance 116.2 m at bearing -29.9 degrees. Fix at (36.8026, -121.7880) with 17.9 m made good.
2015-04-02T20:49:55.361Z,1428007795.361 [Default:CheckIn:Read_GPS] Stopped
2015-04-02T20:49:55.382Z,1428007795.382 [Default:CheckIn:Read_Iridium] Running Loop=1
2015-04-02T20:49:55.779Z,1428007795.779 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:49:55.805Z,1428007795.805 [BPC1](ERROR): Failed to parse message.
2015-04-02T20:49:55.805Z,1428007795.805 [BPC1](ERROR): Failed to parse bank B battery data
2015-04-02T20:49:55.805Z,1428007795.805 [BPC1] Data Fault, FailCount= 1
2015-04-02T20:49:55.805Z,1428007795.805 [BPC1](ERROR): Data Fault
2015-04-02T20:49:55.866Z,1428007795.866 [CBIT](ERROR): Data Fault in component: BPC1
2015-04-02T20:49:56.491Z,1428007796.491 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:49:56.938Z,1428007796.938 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:49:57.363Z,1428007797.363 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:49:57.443Z,1428007797.443 [CBIT](INFO): Clearing failed state for component BPC1
2015-04-02T20:49:57.443Z,1428007797.443 [BPC1] No Fault, FailCount= 1
2015-04-02T20:49:57.831Z,1428007797.831 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:49:58.324Z,1428007798.324 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:49:58.411Z,1428007798.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:49:58.817Z,1428007798.817 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:49:58.830Z,1428007798.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:49:59.242Z,1428007799.242 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:49:59.707Z,1428007799.707 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:50:00.147Z,1428007800.147 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:50:00.224Z,1428007800.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:50:00.631Z,1428007800.631 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:50:00.643Z,1428007800.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:50:01.060Z,1428007801.060 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:50:01.513Z,1428007801.513 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:50:01.954Z,1428007801.954 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:50:02.410Z,1428007802.410 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:50:02.413Z,1428007802.413 [NAL9602](INFO): Powering down
2015-04-02T20:50:02.859Z,1428007802.859 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:50:03.304Z,1428007803.304 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:50:03.720Z,1428007803.720 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:50:03.762Z,1428007803.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:50:04.186Z,1428007804.186 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:50:04.200Z,1428007804.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:50:04.601Z,1428007804.601 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:50:04.678Z,1428007804.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 2 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:50:05.086Z,1428007805.086 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:50:05.105Z,1428007805.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 3 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:50:05.523Z,1428007805.523 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:50:05.976Z,1428007805.976 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:50:06.409Z,1428007806.409 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:50:06.465Z,1428007806.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:50:06.869Z,1428007806.869 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:50:06.882Z,1428007806.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:50:07.291Z,1428007807.291 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:50:07.743Z,1428007807.743 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:50:08.179Z,1428007808.179 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:50:08.636Z,1428007808.636 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:50:09.061Z,1428007809.061 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:50:09.563Z,1428007809.563 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:50:09.986Z,1428007809.986 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:50:10.078Z,1428007810.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:50:10.483Z,1428007810.483 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:50:10.495Z,1428007810.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:50:10.913Z,1428007810.913 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:50:11.411Z,1428007811.411 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:50:11.866Z,1428007811.866 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:50:12.315Z,1428007812.315 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:50:12.745Z,1428007812.745 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:50:12.791Z,1428007812.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:50:13.223Z,1428007813.223 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:50:13.237Z,1428007813.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:50:13.656Z,1428007813.656 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:50:14.122Z,1428007814.122 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:50:14.541Z,1428007814.541 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:50:14.575Z,1428007814.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:50:14.989Z,1428007814.989 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:50:15.002Z,1428007815.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:50:15.418Z,1428007815.418 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:50:15.899Z,1428007815.899 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:50:16.323Z,1428007816.323 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:50:16.366Z,1428007816.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:50:16.768Z,1428007816.768 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:50:16.782Z,1428007816.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:50:17.198Z,1428007817.198 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:50:17.658Z,1428007817.658 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:50:18.087Z,1428007818.087 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:50:18.127Z,1428007818.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:50:18.556Z,1428007818.556 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:50:18.575Z,1428007818.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:50:18.980Z,1428007818.980 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:50:19.441Z,1428007819.441 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:50:19.877Z,1428007819.877 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:50:20.334Z,1428007820.334 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:50:20.766Z,1428007820.766 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:50:21.217Z,1428007821.217 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:50:21.636Z,1428007821.636 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:50:21.749Z,1428007821.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:50:22.157Z,1428007822.157 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:50:22.181Z,1428007822.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:50:22.581Z,1428007822.581 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:50:23.074Z,1428007823.074 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:50:23.495Z,1428007823.495 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:50:23.996Z,1428007823.996 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:50:24.440Z,1428007824.440 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:50:24.897Z,1428007824.897 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:50:25.323Z,1428007825.323 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:50:25.776Z,1428007825.776 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:50:26.199Z,1428007826.199 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:50:26.648Z,1428007826.648 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2015-04-02T20:50:26.656Z,1428007826.656 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:50:27.091Z,1428007827.091 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:50:27.530Z,1428007827.530 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:50:27.958Z,1428007827.958 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:50:28.018Z,1428007828.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:50:28.436Z,1428007828.436 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:50:28.449Z,1428007828.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:50:28.859Z,1428007828.859 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:50:29.332Z,1428007829.332 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:50:29.761Z,1428007829.761 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:50:29.852Z,1428007829.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:50:30.262Z,1428007830.262 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:50:30.280Z,1428007830.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:50:33.642Z,1428007833.642 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:50:34.116Z,1428007834.116 [DataOverHttps](INFO): Sending 211 bytes from file Logs/20150402T201714/Courier0024.lzma
2015-04-02T20:50:34.127Z,1428007834.127 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:50:34.548Z,1428007834.548 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:50:34.998Z,1428007834.998 [DataOverHttps](INFO): Moved sent file to Logs/20150402T201714/Courier0024.lzma.bak
2015-04-02T20:50:34.999Z,1428007834.999 [DataOverHttps](INFO): SBD MOMSN=3101156
2015-04-02T20:50:35.009Z,1428007835.009 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:50:35.546Z,1428007835.546 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:50:35.998Z,1428007835.998 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:50:39.306Z,1428007839.306 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:50:39.342Z,1428007839.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:50:39.742Z,1428007839.742 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:50:39.795Z,1428007839.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:50:40.193Z,1428007840.193 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:50:40.276Z,1428007840.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 2 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:50:40.680Z,1428007840.680 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:50:40.694Z,1428007840.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 3 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:50:41.110Z,1428007841.110 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:50:41.154Z,1428007841.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 4 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:50:41.567Z,1428007841.567 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:50:41.590Z,1428007841.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 5 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:50:44.848Z,1428007844.848 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:50:45.343Z,1428007845.343 [DataOverHttps](INFO): Sending 878 bytes from file Logs/20150402T201714/Express0025.lzma
2015-04-02T20:50:45.353Z,1428007845.353 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:50:45.819Z,1428007845.819 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:50:46.263Z,1428007846.263 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:50:46.686Z,1428007846.686 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:50:47.135Z,1428007847.135 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:50:47.565Z,1428007847.565 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:50:47.606Z,1428007847.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:50:48.017Z,1428007848.017 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:50:48.042Z,1428007848.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:50:48.454Z,1428007848.454 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:50:48.924Z,1428007848.924 [DataOverHttps](INFO): Moved sent file to Logs/20150402T201714/Express0025.lzma.bak
2015-04-02T20:50:48.924Z,1428007848.924 [DataOverHttps](INFO): SBD MOMSN=3101159
2015-04-02T20:50:48.935Z,1428007848.935 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:50:49.460Z,1428007849.460 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:50:49.522Z,1428007849.522 [Default:CheckIn:Read_Iridium] Stopped
2015-04-02T20:50:49.523Z,1428007849.523 [Default:CheckIn](INFO): Completed Default:CheckIn
2015-04-02T20:50:49.523Z,1428007849.523 [Default:CheckIn] Stopped
2015-04-02T20:50:49.523Z,1428007849.523 [Default:CheckIn](INFO): Aggregate::uninitialize Default:CheckIn
2015-04-02T20:50:49.523Z,1428007849.523 [Default:CheckIn:A.SetSpeed] Stopped
2015-04-02T20:50:49.523Z,1428007849.523 [Default:CheckIn:A.SetSpeed](DEBUG): Uninitialize.
2015-04-02T20:50:49.912Z,1428007849.912 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:50:57.754Z,1428007857.754 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:50:57.782Z,1428007857.782 [BPC1](ERROR): Failed to receive battery data
2015-04-02T20:50:57.782Z,1428007857.782 [BPC1] Communications Fault, FailCount= 1
2015-04-02T20:50:57.782Z,1428007857.782 [BPC1](ERROR): Communications Fault
2015-04-02T20:50:57.789Z,1428007857.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:50:57.850Z,1428007857.850 [CBIT](ERROR): Communications Fault in component: BPC1
2015-04-02T20:50:59.895Z,1428007859.895 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:50:59.921Z,1428007859.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-04-02T20:51:04.883Z,1428007864.883 [Depth_Keller](ERROR): Pressure reading out of range: 1830.853882 decibar
2015-04-02T20:51:04.884Z,1428007864.884 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:51:09.891Z,1428007869.891 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:51:09.934Z,1428007869.934 [CBIT](INFO): Clearing failed state for component BPC1
2015-04-02T20:51:09.934Z,1428007869.934 [BPC1] No Fault, FailCount= 1
2015-04-02T20:51:14.885Z,1428007874.885 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:51:19.886Z,1428007879.886 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:51:24.902Z,1428007884.902 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:51:29.882Z,1428007889.882 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:51:34.897Z,1428007894.897 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:51:34.952Z,1428007894.952 [BPC1](ERROR): Failed to receive battery data
2015-04-02T20:51:34.952Z,1428007894.952 [BPC1] Communications Fault, FailCount= 2
2015-04-02T20:51:34.952Z,1428007894.952 [BPC1](ERROR): Communications Fault
2015-04-02T20:51:35.012Z,1428007895.012 [CBIT](ERROR): Communications Fault in component: BPC1
2015-04-02T20:51:39.889Z,1428007899.889 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:51:44.885Z,1428007904.885 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:51:49.897Z,1428007909.897 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:51:49.982Z,1428007909.982 [CBIT](INFO): Clearing failed state for component BPC1
2015-04-02T20:51:49.983Z,1428007909.983 [BPC1] No Fault, FailCount= 2
2015-04-02T20:51:54.896Z,1428007914.896 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:52:02.734Z,1428007922.734 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:52:04.900Z,1428007924.900 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:52:09.906Z,1428007929.906 [Depth_Keller](ERROR): Pressure reading out of range: 1830.853882 decibar
2015-04-02T20:52:09.907Z,1428007929.907 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:52:14.881Z,1428007934.881 [DataOverHttps](IMPORTANT): SBD MTMSN=20150402T205140
2015-04-02T20:52:14.892Z,1428007934.892 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:52:19.888Z,1428007939.888 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:52:24.900Z,1428007944.900 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:52:32.738Z,1428007952.738 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:52:34.883Z,1428007954.883 [DataOverHttps](INFO): Received command:restart app
2015-04-02T20:52:34.891Z,1428007954.891 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-04-02T20:52:34.978Z,1428007954.978 [CommandLine](IMPORTANT): got command restart application
2015-04-02T20:52:34.984Z,1428007954.984 [Default:UpdateAndReportMinutesSinceMissionStarted] Running Loop=1
2015-04-02T20:52:34.984Z,1428007954.984 [Default:UpdateAndReportMinutesSinceMissionStarted](INFO): Aggregate::initialize Default:UpdateAndReportMinutesSinceMissionStarted
2015-04-02T20:52:34.985Z,1428007954.985 [Default:UpdateAndReportMinutesSinceMissionStarted:A] Running Loop=1
2015-04-02T20:52:34.986Z,1428007954.986 [Default:UpdateAndReportMinutesSinceMissionStarted:A] Stopped
2015-04-02T20:52:34.986Z,1428007954.986 [Default:UpdateAndReportMinutesSinceMissionStarted:B] Running Loop=1
2015-04-02T20:52:35.986Z,1428007955.986 [CommandLine ThreadHandler](INFO): Uninitializing protected caller thread.
2015-04-02T20:52:35.986Z,1428007955.986 [CommandLine ThreadHandler](INFO): Thread cancelled.
2015-04-02T20:52:36.003Z,1428007956.003 [Supervisor](DEBUG): Uninitializing supervisor and starting cleanup.  Bye!
2015-04-02T20:52:36.003Z,1428007956.003 [CommandLine ThreadHandler](INFO): Thread cancelled.
2015-04-02T20:52:36.003Z,1428007956.003 [CommandLine](INFO): Join timeout helper Thread ID is 915
2015-04-02T20:52:36.004Z,1428007956.004 [ComponentRegistry](INFO): Shutting down NavChartDb ThreadHandler
2015-04-02T20:52:36.004Z,1428007956.004 [NavChartDb ThreadHandler](INFO): Thread cancelled.
2015-04-02T20:52:36.005Z,1428007956.005 [NavChartDb](INFO): Join timeout helper Thread ID is 916
2015-04-02T20:52:36.167Z,1428007956.167 [NavChartDb ThreadHandler](INFO): Uninitializing protected caller thread.
2015-04-02T20:52:36.167Z,1428007956.167 [NavChartDb ThreadHandler](INFO): Thread cancelled.
2015-04-02T20:52:36.183Z,1428007956.183 [ComponentRegistry](INFO): Shutting down Radio_Surface ThreadHandler
2015-04-02T20:52:36.183Z,1428007956.183 [Radio_Surface ThreadHandler](INFO): Thread cancelled.
2015-04-02T20:52:36.183Z,1428007956.183 [Radio_Surface](INFO): Join timeout helper Thread ID is 917
2015-04-02T20:52:36.399Z,1428007956.399 [Radio_Surface ThreadHandler](INFO): Uninitializing protected caller thread.
2015-04-02T20:52:36.400Z,1428007956.400 [Radio_Surface ThreadHandler](INFO): Thread cancelled.
2015-04-02T20:52:36.403Z,1428007956.403 [ComponentRegistry](INFO): Shutting down WetLabsBB2FL ThreadHandler
2015-04-02T20:52:36.403Z,1428007956.403 [WetLabsBB2FL ThreadHandler](INFO): Thread cancelled.
2015-04-02T20:52:36.404Z,1428007956.404 [WetLabsBB2FL](INFO): Join timeout helper Thread ID is 918
2015-04-02T20:52:36.604Z,1428007956.604 [WetLabsBB2FL ThreadHandler](INFO): Uninitializing protected caller thread.
2015-04-02T20:52:36.604Z,1428007956.604 [WetLabsBB2FL](INFO): Powering down
2015-04-02T20:52:36.605Z,1428007956.605 [WetLabsBB2FL ThreadHandler](INFO): Thread cancelled.
2015-04-02T20:52:36.624Z,1428007956.624 [ComponentRegistry](INFO): Shutting down CTD_NeilBrown ThreadHandler
2015-04-02T20:52:36.624Z,1428007956.624 [CTD_NeilBrown ThreadHandler](INFO): Thread cancelled.
2015-04-02T20:52:36.624Z,1428007956.624 [CTD_NeilBrown](INFO): Join timeout helper Thread ID is 919
2015-04-02T20:52:36.980Z,1428007956.980 [CTD_NeilBrown ThreadHandler](INFO): Uninitializing protected caller thread.
2015-04-02T20:52:36.980Z,1428007956.980 [CTD_NeilBrown](INFO): Powering down
2015-04-02T20:52:36.981Z,1428007956.981 [CTD_NeilBrown ThreadHandler](INFO): Thread cancelled.
2015-04-02T20:52:36.985Z,1428007956.985 [ComponentRegistry](INFO): Shutting down logger ThreadHandler
2015-04-02T20:52:36.985Z,1428007956.985 [logger ThreadHandler](INFO): Thread cancelled.
2015-04-02T20:52:36.986Z,1428007956.986 [logger](INFO): Join timeout helper Thread ID is 920
2015-04-02T20:52:37.012Z,1428007957.012 [logger ThreadHandler](INFO): Uninitializing protected caller thread.
2015-04-02T20:52:37.013Z,1428007957.013 [logger ThreadHandler](INFO): Thread cancelled.
2015-04-02T20:52:37.025Z,1428007957.025 [ComponentRegistry](INFO): Shutting down CommandLine ThreadHandler
2015-04-02T20:52:37.025Z,1428007957.025 [CommandLine ThreadHandler](INFO): Thread cancelled.
2015-04-02T20:52:37.025Z,1428007957.025 [ComponentRegistry](INFO): Shutting down controlThread ThreadHandler
2015-04-02T20:52:37.025Z,1428007957.025 [controlThread ThreadHandler](INFO): Thread cancelled.
2015-04-02T20:52:37.026Z,1428007957.026 [controlThread](INFO): Join timeout helper Thread ID is 921
2015-04-02T20:52:39.548Z,1428007959.548 [controlThread ThreadHandler](INFO): Uninitializing protected caller thread.
2015-04-02T20:52:39.549Z,1428007959.549 [controlThread](DEBUG): Uninitializing ControlThread
2015-04-02T20:52:39.549Z,1428007959.549 [Aanderaa_O2](INFO): Powering down
2015-04-02T20:52:39.551Z,1428007959.551 [AHRS_sp3003D](INFO): Powering down
2015-04-02T20:52:39.709Z,1428007959.709 [DVL_micro](INFO): uninitialize:Powering down
2015-04-02T20:52:39.710Z,1428007959.710 [NAL9602](INFO): Powering down
2015-04-02T20:52:39.712Z,1428007959.712 [DepthRateCalculator](DEBUG): Initializing DepthRateCalculator.
2015-04-02T20:52:39.713Z,1428007959.713 [NavChart](DEBUG): Uninitialize NavChart Navigation.
2015-04-02T20:52:39.714Z,1428007959.714 [Default] Stopped
2015-04-02T20:52:39.714Z,1428007959.714 [Default](INFO): Aggregate::uninitialize Default
2015-04-02T20:52:39.714Z,1428007959.714 [Default:B.GoToSurface] Stopped
2015-04-02T20:52:39.714Z,1428007959.714 [Default:B.GoToSurface](DEBUG): Uninitialize GoToSurfaceComponent.
2015-04-02T20:52:39.714Z,1428007959.714 [Default:UpdateAndReportMinutesSinceMissionStarted] Stopped
2015-04-02T20:52:39.714Z,1428007959.714 [Default:UpdateAndReportMinutesSinceMissionStarted](INFO): Aggregate::uninitialize Default:UpdateAndReportMinutesSinceMissionStarted
2015-04-02T20:52:39.714Z,1428007959.714 [Default:UpdateAndReportMinutesSinceMissionStarted:B] Stopped
2015-04-02T20:52:39.714Z,1428007959.714 [Default:WaitAtTheSurface] Stopped
2015-04-02T20:52:39.714Z,1428007959.714 [Default:WaitAtTheSurface](INFO): Aggregate::uninitialize Default:WaitAtTheSurface
2015-04-02T20:52:39.715Z,1428007959.715 [Default:WaitAtTheSurface:RunApplicationAtLowSpeed.SetSpeed] Stopped
2015-04-02T20:52:39.715Z,1428007959.715 [Default:WaitAtTheSurface:RunApplicationAtLowSpeed.SetSpeed](DEBUG): Uninitialize.
2015-04-02T20:52:39.718Z,1428007959.718 [VerticalControl](DEBUG): Uninitialize VerticalControlComponent.
2015-04-02T20:52:39.719Z,1428007959.719 [HorizontalControl](DEBUG): Uninitialize HorizontalControlComponent.
2015-04-02T20:52:39.719Z,1428007959.719 [SpeedControl](DEBUG): Uninitialize SpeedControlComponent.
2015-04-02T20:52:39.719Z,1428007959.719 [LoopControl](DEBUG): Uninitialize LoopControlComponent.
2015-04-02T20:52:39.720Z,1428007959.720 [BuoyancyServo](DEBUG): Uninitialize Buoyancy Servo.
2015-04-02T20:52:39.720Z,1428007959.720 [BuoyancyServo](INFO): Powering down
2015-04-02T20:52:39.733Z,1428007959.733 [ElevatorServo](DEBUG): Uninitialize Elevator Servo.
2015-04-02T20:52:39.733Z,1428007959.733 [ElevatorServo](INFO): Powering down
2015-04-02T20:52:39.734Z,1428007959.734 [MassServo](DEBUG): Uninitialize Mass Servo.
2015-04-02T20:52:39.734Z,1428007959.734 [MassServo](INFO): Powering down
2015-04-02T20:52:39.734Z,1428007959.734 [RudderServo](DEBUG): Uninitialize Rudder Servo.
2015-04-02T20:52:39.735Z,1428007959.735 [RudderServo](INFO): Powering down
2015-04-02T20:52:39.735Z,1428007959.735 [ThrusterServo](DEBUG): Uninitialize Thruster Servo.
2015-04-02T20:52:39.736Z,1428007959.736 [ThrusterServo](INFO): Powering down
2015-04-02T20:52:39.736Z,1428007959.736 [SBIT](DEBUG): Uninitialize SBIT Component.
2015-04-02T20:52:39.737Z,1428007959.737 [IBIT](DEBUG): Uninitialize IBIT Component.
2015-04-02T20:52:39.737Z,1428007959.737 [CBIT](DEBUG): Uninitialize CBIT Component.
2015-04-02T20:52:39.769Z,1428007959.769 [controlThread ThreadHandler](INFO): Thread cancelled.
2015-04-02T20:52:39.833Z,1428007959.833 [WetLabsBB2FL ThreadHandler](INFO): Thread cancelled.
2015-04-02T20:52:39.838Z,1428007959.838 [CTD_NeilBrown ThreadHandler](INFO): Thread cancelled.
2015-04-02T20:52:39.897Z,1428007959.897 [Radio_Surface ThreadHandler](INFO): Thread cancelled.
2015-04-02T20:52:39.948Z,1428007959.948 [NavChartDb ThreadHandler](INFO): Thread cancelled.
2015-04-02T20:52:40.012Z,1428007960.012 [logger ThreadHandler](INFO): Thread cancelled.