daphne Path

trajectory

20150220T004347 mission has been running for 1.819366 min

20150220T004400 [BPC1]:Failed to receive battery data

20150220T004400 [BPC1]:Communications Fault

20150220T004400 [CBIT]:Communications Fault in component: BPC1

20150220T004500 [DVL_micro]:DVL failed to acquire valid data within timeout.

20150220T004500 [DVL_micro]:Data Fault

20150220T004500 [CBIT]:Data Fault in component: DVL_micro

20150220T004813 [DVL_micro]:DVL failed to acquire valid data within timeout.

20150220T004813 [DVL_micro]:Data Fault

20150220T004813 [CBIT]:Data Fault in component: DVL_micro

20150220T004853 mission has been running for 6.837271 min

20150220T004911 [BPC1]:Failed to receive battery data

20150220T004911 [BPC1]:Communications Fault

20150220T004911 [CBIT]:Communications Fault in component: BPC1

20150220T005153 [DVL_micro]:DVL failed to acquire valid data within timeout.

20150220T005153 [DVL_micro]:Data Fault

20150220T005153 [CBIT]:Data Fault in component: DVL_micro

20150220T005348 mission has been running for 11.843738 min

20150220T005408 [BPC1]:Failed to receive battery data

20150220T005408 [BPC1]:Communications Fault

20150220T005409 [CBIT]:Communications Fault in component: BPC1

20150220T005623 [NAL9602]:Failed to initiate SBD session. Error code: 2

20150220T005623 [NAL9602]:MT Queue status failed to be acquired within timeout. Will not retry this session.

20150220T010136 [NAL9602]:GPS failed to acquire within timeout.

20150220T010136 [CBIT]:Data Fault in component: NAL9602

20150220T010657 [NAL9602]:MT Queue status failed to be acquired within timeout. Will not retry this session.

20150220T011155 [NAL9602]:GPS failed to acquire within timeout.

20150220T011155 [CBIT]:Data Fault in component: NAL9602

20150220T011206 [PAR_Licor]:Data Fault

20150220T011206 [BPC1]:B bank: No match for serial number:5911 was found in the onboard configuration.

20150220T011206 [BPC1]:Failed to parse bank B battery data

20150220T011206 [CBIT]:Data Fault in component: PAR_Licor

20150220T011206 [CBIT]:Data Fault in component: BPC1

20150220T011305 [DVL_micro]:DVL Failure: Failed to read in all data items. Got 1 of 46

20150220T011305 [DVL_micro]:Failed to parse DVL response:$#NQ.RES 0X116#

20150220T011524 [DVL_micro]:NQ1 string checksum mismatch. Reported:122 Calculated:97

20150220T011710 [DVL_micro]:No DVL communication! Re-initializing

20150220T011710 [DVL_micro]:Communications Fault

20150220T011710 [CBIT]:Communications Fault in component: DVL_micro

20150220T011716 [NAL9602]:MT Queue status failed to be acquired within timeout. Will not retry this session.

20150220T012214 [NAL9602]:GPS failed to acquire within timeout.

20150220T012214 [CBIT]:Data Fault in component: NAL9602

20150220T012657 [NAL9602]:Failed to initiate SBD session. Error code: 2

20150220T012708 [Depth_Keller]:Pressure reading out of range: 1830.459229 decibar

20150220T013443 [NAL9602]:Failed to initiate SBD session. Error code: 2

20150220T015414 [Depth_Keller]:Pressure reading out of range: 1830.494263 decibar

20150220T015426 [DVL_micro]:DVL Failure: Failed to read in all data items. Got 44 of 46

20150220T015428 [BPC1]:B bank expecting battery number:1 and read number: uart

20150220T015428 [BPC1]:Failed to parse bank B battery data

20150220T015428 [CBIT]:Data Fault in component: BPC1

20150220T015553 [BPC1]:Failed to parse message.

20150220T015553 [BPC1]:Failed to parse bank A battery data

20150220T015553 [CBIT]:Data Fault in component: BPC1

20150220T015607 [BPC1]:B bank expecting battery number:1 and read number: uart

20150220T015607 [BPC1]:Failed to parse bank B battery data

20150220T015619 [BPC1]:Failed to parse message.

20150220T015619 [BPC1]:Failed to parse bank A battery data

20150220T020450 [BPC1]:B bank expecting battery number:1 and read number: uart

20150220T020915 [BPC1]:B bank: No match for serial number:5911 was found in the onboard configuration.

20150220T024004 [DVL_micro]:No DVL communication! Re-initializing

20150220T024004 [DVL_micro]:Communications Fault

20150220T024004 [CBIT]:Communications Fault in component: DVL_micro

20150220T024707 [Depth_Keller]:Pressure reading out of range: 1830.496826 decibar

20150220T025811 [DVL_micro]:DVL Failure: Failed to read in all data items. Got 43 of 46

20150220T030014 [BPC1]:A bank expecting battery number:1 and read number: uart

20150220T030014 [BPC1]:Failed to parse bank A battery data

20150220T030554 [CommandLine]:Scheduling is paused

20150220T030847 [BPC1]:A bank expecting battery number:1 and read number: uart

20150220T031109 [DVL_micro]:No DVL communication! Re-initializing

20150220T031109 [DVL_micro]:Communications Fault

20150220T031109 [CBIT]:Communications Fault in component: DVL_micro

20150220T032717 [BPC1]:A bank expecting battery number:1 and read number: uart

20150220T034519 [BPC1]:Failed to parse message.

20150220T035518 [BPC1]:A bank: No match for serial number:5911 was found in the onboard configuration.

20150220T040223 [DVL_micro]:NQ1 string checksum mismatch. Reported:93 Calculated:68

20150220T040808 [PAR_Licor]:Data Fault

20150220T040808 [CBIT]:Data Fault in component: PAR_Licor

20150220T042851 [NAL9602]:NAL9602 initialization error.

20150220T042851 [NAL9602]:Communications Fault

20150220T042851 [CBIT]:Communications Fault in component: NAL9602

20150220T043938 [NAL9602]:Failed to receive proper response when querying signal strength for MT queue check.

20150220T045034 [NAL9602]:Failed to receive proper response when querying signal strength for MT queue check.

20150220T060136 [BPC1]:A bank: No match for serial number:5911 was found in the onboard configuration.

20150220T062422 [BPC1]:B bank: No match for serial number:5911 was found in the onboard configuration.

20150220T063600 [BPC1]:A bank expecting battery number:1 and read number: uart read:

20150220T063930 [CBIT]:Beginning GF scan

20150220T064258 [NAL9602]:Queried for signal strength and failed to receive proper response. no error

20150220T064258 [NAL9602]:received: ##COMMAND MODE: Started####COMMAND MODE: Ready for Input##

20150220T065113 [PAR_Licor]:Data Fault

20150220T065114 [CBIT]:Data Fault in component: PAR_Licor

20150220T090632 [DVL_micro]:NQ1 string checksum mismatch. Reported:108 Calculated:104

20150220T091857 [BPC1]:A bank: No match for serial number:5911 was found in the onboard configuration.

20150220T101929 [NAL9602]:Inadequate Iridium signal strength reported: 0

20150220T101931 [NAL9602]:Inadequate Iridium signal strength reported: 0

20150220T101940 [NAL9602]:Inadequate Iridium signal strength reported: 0

20150220T112605 [BPC1]:A bank expecting battery number:1 and read number: uart read:

20150220T123957 [CBIT]:Beginning GF scan

20150220T130226 [NAL9602]:Queried for signal strength and failed to receive proper response. no error

20150220T130226 [NAL9602]:received: ##COMMAND MODE: Started####COMMAND MODE: Ready for Input##

20150220T131807 [NAL9602]:Failed to receive proper response when querying signal strength for MT queue check.

20150220T131807 [NAL9602]:received: ##+CSQ:0####OK: Started####COMMAND MODE: Ready for Input##

20150220T132650 [NAL9602]:received: ##+CSQ:0####OK: Started####COMMAND MODE: Ready for Input##

20150220T151407 [BPC1]:A bank expecting battery number:1 and read number: uart read:

20150220T153210 [CommandLine]:got command restart system