2015-01-30T20:49:32.660Z,1422650972.660 [Supervisor](DEBUG): Initializing supervisor.
2015-01-30T20:49:32.662Z,1422650972.662 [SyncHandler](DEBUG): Created PCaller Thread at 4034C4E0
2015-01-30T20:49:32.663Z,1422650972.663 [SyncHandler](INFO): Protected caller Thread ID is 1279
2015-01-30T20:49:32.663Z,1422650972.663 [ComponentRegistry](DEBUG): Component "controlThread" handled in its own thread.
2015-01-30T20:49:32.664Z,1422650972.664 [controlThread ThreadHandler](DEBUG): Created PCaller Thread at 4037C4E0
2015-01-30T20:49:32.664Z,1422650972.664 [controlThread ThreadHandler](INFO): Protected caller Thread ID is 1280
2015-01-30T20:49:32.667Z,1422650972.667 [ComponentRegistry](DEBUG): SyncComponent "CycleStarter" handled in the control thread.
2015-01-30T20:49:32.679Z,1422650972.679 [ComponentRegistry](DEBUG): Component "CommandLine" handled in its own thread.
2015-01-30T20:49:32.680Z,1422650972.680 [CommandLine ThreadHandler](DEBUG): Created PCaller Thread at 403AC4E0
2015-01-30T20:49:32.680Z,1422650972.680 [CommandLine ThreadHandler](INFO): Protected caller Thread ID is 1281
2015-01-30T20:49:32.681Z,1422650972.681 [ComponentRegistry](DEBUG): Component "logger" handled in its own thread.
2015-01-30T20:49:32.682Z,1422650972.682 [logger ThreadHandler](DEBUG): Created PCaller Thread at 403DC4E0
2015-01-30T20:49:32.682Z,1422650972.682 [logger ThreadHandler](INFO): Protected caller Thread ID is 1282
2015-01-30T20:49:32.684Z,1422650972.684 [ComponentRegistry](DEBUG): SyncComponent "LogSplitter" handled in the control thread.
2015-01-30T20:49:32.685Z,1422650972.685 [Supervisor](INFO): Looking for Config files in directory: Config/
2015-01-30T20:49:32.686Z,1422650972.686 [Supervisor](INFO): Opening Config file at: Config/Control.cfg
2015-01-30T20:49:33.006Z,1422650973.006 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Control
2015-01-30T20:49:33.006Z,1422650973.006 [Supervisor](INFO): Opening Config file at: Config/BIT.cfg
2015-01-30T20:49:33.165Z,1422650973.165 [ComponentRegistry](DEBUG): Loaded Config Component "Config/BIT
2015-01-30T20:49:33.166Z,1422650973.166 [Supervisor](INFO): Opening Config file at: Config/Derivation.cfg
2015-01-30T20:49:33.274Z,1422650973.274 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Derivation
2015-01-30T20:49:33.274Z,1422650973.274 [Supervisor](INFO): Opening Config file at: Config/Estimation.cfg
2015-01-30T20:49:33.395Z,1422650973.395 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Estimation
2015-01-30T20:49:33.396Z,1422650973.396 [Supervisor](INFO): Opening Config file at: Config/Guidance.cfg
2015-01-30T20:49:33.482Z,1422650973.482 [Supervisor](INFO): Opening Config file at: Config/Navigation.cfg
2015-01-30T20:49:33.639Z,1422650973.639 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Navigation
2015-01-30T20:49:33.640Z,1422650973.640 [Supervisor](INFO): Opening Config file at: Config/Sample.cfg
2015-01-30T20:49:33.726Z,1422650973.726 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Sample
2015-01-30T20:49:33.726Z,1422650973.726 [Supervisor](INFO): Opening Config file at: Config/Science.cfg
2015-01-30T20:49:33.929Z,1422650973.929 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Science
2015-01-30T20:49:33.929Z,1422650973.929 [Supervisor](INFO): Opening Config file at: Config/Sensor.cfg
2015-01-30T20:49:34.287Z,1422650974.287 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Sensor
2015-01-30T20:49:34.288Z,1422650974.288 [Supervisor](INFO): Opening Config file at: Config/Servo.cfg
2015-01-30T20:49:34.590Z,1422650974.590 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Servo
2015-01-30T20:49:34.591Z,1422650974.591 [Supervisor](INFO): Opening Config file at: Config/Simulator.cfg
2015-01-30T20:49:35.097Z,1422650975.097 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Simulator
2015-01-30T20:49:35.098Z,1422650975.098 [Supervisor](INFO): Opening Config file at: Config/logger.cfg
2015-01-30T20:49:35.299Z,1422650975.299 [ComponentRegistry](DEBUG): Loaded Config Component "Config/logger
2015-01-30T20:49:35.300Z,1422650975.300 [Supervisor](INFO): Opening Config file at: Config/secure.cfg
2015-01-30T20:49:35.404Z,1422650975.404 [ComponentRegistry](DEBUG): Loaded Config Component "Config/secure
2015-01-30T20:49:35.404Z,1422650975.404 [Supervisor](INFO): Opening Config file at: Config/vehicle.cfg
2015-01-30T20:49:35.811Z,1422650975.811 [ComponentRegistry](DEBUG): Loaded Config Component "Config/vehicle
2015-01-30T20:49:35.812Z,1422650975.812 [Supervisor](INFO): Opening Config file at: Config/workSite.cfg
2015-01-30T20:49:35.922Z,1422650975.922 [ComponentRegistry](DEBUG): Loaded Config Component "Config/workSite
2015-01-30T20:49:35.924Z,1422650975.924 [Supervisor](INFO): Looking for Config files in directory: Config/lrauv-daphne/
2015-01-30T20:49:35.925Z,1422650975.925 [Supervisor](INFO): Opening Config file at: Config/lrauv-daphne/Control.cfg
2015-01-30T20:49:36.027Z,1422650976.027 [Supervisor](INFO): Opening Config file at: Config/lrauv-daphne/BIT.cfg
2015-01-30T20:49:36.145Z,1422650976.145 [Supervisor](INFO): Opening Config file at: Config/lrauv-daphne/logger.cfg
2015-01-30T20:49:36.242Z,1422650976.242 [Supervisor](INFO): Opening Config file at: Config/lrauv-daphne/Estimation.cfg
2015-01-30T20:49:36.349Z,1422650976.349 [Supervisor](INFO): Opening Config file at: Config/lrauv-daphne/Navigation.cfg
2015-01-30T20:49:36.446Z,1422650976.446 [Supervisor](INFO): Opening Config file at: Config/lrauv-daphne/Science.cfg
2015-01-30T20:49:36.573Z,1422650976.573 [Supervisor](INFO): Opening Config file at: Config/lrauv-daphne/Sensor.cfg
2015-01-30T20:49:36.726Z,1422650976.726 [Supervisor](INFO): Opening Config file at: Config/lrauv-daphne/Servo.cfg
2015-01-30T20:49:36.826Z,1422650976.826 [Supervisor](INFO): Opening Config file at: Config/lrauv-daphne/Simulator.cfg
2015-01-30T20:49:36.916Z,1422650976.916 [Supervisor](INFO): Opening Config file at: Config/lrauv-daphne/workSite.cfg
2015-01-30T20:49:37.003Z,1422650977.003 [Supervisor](INFO): Opening Config file at: Config/lrauv-daphne/secure.cfg
2015-01-30T20:49:37.152Z,1422650977.152 [Supervisor](INFO): Opening Config file at: Config/lrauv-daphne/vehicle.cfg
2015-01-30T20:49:37.270Z,1422650977.270 [Supervisor](INFO): Opening Config file at: Config/lrauv-daphne/Battery.cfg
2015-01-30T20:49:37.506Z,1422650977.506 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Battery
2015-01-30T20:49:37.507Z,1422650977.507 [Supervisor](IMPORTANT): Reading configuration overrides from Data/persisted.cfg
2015-01-30T20:49:37.512Z,1422650977.512 [Module Loader](DEBUG): Loading Module at Modules/Control.so
2015-01-30T20:49:37.565Z,1422650977.565 [VerticalControl](DEBUG): Construct VerticalControl.
2015-01-30T20:49:37.685Z,1422650977.685 [VerticalControl] Loaded
2015-01-30T20:49:37.685Z,1422650977.685 [ComponentRegistry](DEBUG): SyncComponent "VerticalControl" handled in the control thread.
2015-01-30T20:49:37.686Z,1422650977.686 [HorizontalControl](DEBUG): Construct HorizontalControl.
2015-01-30T20:49:37.758Z,1422650977.758 [HorizontalControl] Loaded
2015-01-30T20:49:37.758Z,1422650977.758 [ComponentRegistry](DEBUG): SyncComponent "HorizontalControl" handled in the control thread.
2015-01-30T20:49:37.759Z,1422650977.759 [SpeedControl](DEBUG): Construct SpeedControl.
2015-01-30T20:49:37.765Z,1422650977.765 [SpeedControl] Loaded
2015-01-30T20:49:37.765Z,1422650977.765 [ComponentRegistry](DEBUG): SyncComponent "SpeedControl" handled in the control thread.
2015-01-30T20:49:37.766Z,1422650977.766 [LoopControl](DEBUG): Construct LoopControl.
2015-01-30T20:49:37.766Z,1422650977.766 [LoopControl] Loaded
2015-01-30T20:49:37.767Z,1422650977.767 [ComponentRegistry](DEBUG): SyncComponent "LoopControl" handled in the control thread.
2015-01-30T20:49:37.767Z,1422650977.767 [Module Loader](DEBUG): Loaded Module: Control (Contains the Control components, such as Depth, Heading, and Speed Control)
2015-01-30T20:49:37.768Z,1422650977.768 [Module Loader](DEBUG): Loading Module at Modules/BIT.so
2015-01-30T20:49:37.870Z,1422650977.870 [SBIT](DEBUG): Construct Startup Built In Test.
2015-01-30T20:49:37.882Z,1422650977.882 [SBIT] Loaded
2015-01-30T20:49:37.882Z,1422650977.882 [ComponentRegistry](DEBUG): SyncComponent "SBIT" handled in the control thread.
2015-01-30T20:49:37.883Z,1422650977.883 [IBIT](DEBUG): Construct Initiated Built In Test.
2015-01-30T20:49:37.912Z,1422650977.912 [IBIT] Loaded
2015-01-30T20:49:37.912Z,1422650977.912 [ComponentRegistry](DEBUG): SyncComponent "IBIT" handled in the control thread.
2015-01-30T20:49:37.914Z,1422650977.914 [CBIT](DEBUG): Construct CBIT Built In Test.
2015-01-30T20:49:38.047Z,1422650978.047 [CBIT] Loaded
2015-01-30T20:49:38.047Z,1422650978.047 [ComponentRegistry](DEBUG): SyncComponent "CBIT" handled in the control thread.
2015-01-30T20:49:38.048Z,1422650978.048 [Module Loader](DEBUG): Loaded Module: BIT (Contains the BuiltInTest components, such as C Built In Test)
2015-01-30T20:49:38.048Z,1422650978.048 [Module Loader](DEBUG): Loading Module at Modules/Derivation.so
2015-01-30T20:49:38.067Z,1422650978.067 [DepthRateCalculator] Loaded
2015-01-30T20:49:38.067Z,1422650978.067 [ComponentRegistry](DEBUG): SyncComponent "DepthRateCalculator" handled in the control thread.
2015-01-30T20:49:38.072Z,1422650978.072 [PitchRateCalculator] Loaded
2015-01-30T20:49:38.073Z,1422650978.073 [ComponentRegistry](DEBUG): SyncComponent "PitchRateCalculator" handled in the control thread.
2015-01-30T20:49:38.084Z,1422650978.084 [SpeedCalculator] Loaded
2015-01-30T20:49:38.084Z,1422650978.084 [ComponentRegistry](DEBUG): SyncComponent "SpeedCalculator" handled in the control thread.
2015-01-30T20:49:38.101Z,1422650978.101 [TempGradientCalculator] Loaded
2015-01-30T20:49:38.101Z,1422650978.101 [ComponentRegistry](DEBUG): SyncComponent "TempGradientCalculator" handled in the control thread.
2015-01-30T20:49:38.107Z,1422650978.107 [YawRateCalculator] Loaded
2015-01-30T20:49:38.107Z,1422650978.107 [ComponentRegistry](DEBUG): SyncComponent "YawRateCalculator" handled in the control thread.
2015-01-30T20:49:38.108Z,1422650978.108 [Module Loader](DEBUG): Loaded Module: Derivation (Contains the base derivation components)
2015-01-30T20:49:38.108Z,1422650978.108 [Module Loader](DEBUG): Loading Module at Modules/Estimation.so
2015-01-30T20:49:38.160Z,1422650978.160 [Module Loader](DEBUG): Loaded Module: Estimation (Contains the base estimation components)
2015-01-30T20:49:38.160Z,1422650978.160 [Module Loader](DEBUG): Loading Module at Modules/Guidance.so
2015-01-30T20:49:38.394Z,1422650978.394 [Module Loader](DEBUG): Loaded Module: Guidance (Contains behaviors and commands)
2015-01-30T20:49:38.394Z,1422650978.394 [Module Loader](DEBUG): Loading Module at Modules/Navigation.so
2015-01-30T20:49:38.482Z,1422650978.482 [DeadReckonUsingMultipleVelocitySources] Loaded
2015-01-30T20:49:38.482Z,1422650978.482 [ComponentRegistry](DEBUG): SyncComponent "DeadReckonUsingMultipleVelocitySources" handled in the control thread.
2015-01-30T20:49:38.528Z,1422650978.528 [DeadReckonUsingSpeedCalculator] Loaded
2015-01-30T20:49:38.528Z,1422650978.528 [ComponentRegistry](DEBUG): SyncComponent "DeadReckonUsingSpeedCalculator" handled in the control thread.
2015-01-30T20:49:38.545Z,1422650978.545 [NavChart] Loaded
2015-01-30T20:49:38.545Z,1422650978.545 [ComponentRegistry](DEBUG): SyncComponent "NavChart" handled in the control thread.
2015-01-30T20:49:38.550Z,1422650978.550 [UniversalFixResidualReporter] Loaded
2015-01-30T20:49:38.550Z,1422650978.550 [ComponentRegistry](DEBUG): SyncComponent "UniversalFixResidualReporter" handled in the control thread.
2015-01-30T20:49:38.550Z,1422650978.550 [Module Loader](DEBUG): Loaded Module: Navigation (Contains the base navigation components)
2015-01-30T20:49:38.551Z,1422650978.551 [Module Loader](DEBUG): Loading Module at Modules/Sample.so
2015-01-30T20:49:38.557Z,1422650978.557 [Module Loader](DEBUG): Loaded Module: Sample (This is a Sample Module of Sample Components)
2015-01-30T20:49:38.557Z,1422650978.557 [Module Loader](DEBUG): Loading Module at Modules/Science.so
2015-01-30T20:49:38.735Z,1422650978.735 [Aanderaa_O2] Loaded
2015-01-30T20:49:38.736Z,1422650978.736 [ComponentRegistry](DEBUG): SyncComponent "Aanderaa_O2" handled in the control thread.
2015-01-30T20:49:38.773Z,1422650978.773 [CTD_NeilBrown] Loaded
2015-01-30T20:49:38.773Z,1422650978.773 [ComponentRegistry](DEBUG): Component "CTD_NeilBrown" handled in its own thread.
2015-01-30T20:49:38.774Z,1422650978.774 [CTD_NeilBrown ThreadHandler](DEBUG): Created PCaller Thread at 4056E4E0
2015-01-30T20:49:38.775Z,1422650978.775 [CTD_NeilBrown ThreadHandler](INFO): Protected caller Thread ID is 1367
2015-01-30T20:49:38.788Z,1422650978.788 [ISUS] Loaded
2015-01-30T20:49:38.788Z,1422650978.788 [ComponentRegistry](DEBUG): SyncComponent "ISUS" handled in the control thread.
2015-01-30T20:49:38.803Z,1422650978.803 [PAR_Licor] Loaded
2015-01-30T20:49:38.803Z,1422650978.803 [ComponentRegistry](DEBUG): SyncComponent "PAR_Licor" handled in the control thread.
2015-01-30T20:49:38.839Z,1422650978.839 [WetLabsBB2FL] Loaded
2015-01-30T20:49:38.839Z,1422650978.839 [ComponentRegistry](DEBUG): Component "WetLabsBB2FL" handled in its own thread.
2015-01-30T20:49:38.840Z,1422650978.840 [WetLabsBB2FL ThreadHandler](DEBUG): Created PCaller Thread at 4059E4E0
2015-01-30T20:49:38.841Z,1422650978.841 [WetLabsBB2FL ThreadHandler](INFO): Protected caller Thread ID is 1368
2015-01-30T20:49:38.841Z,1422650978.841 [Module Loader](DEBUG): Loaded Module: Science (Contains the science components)
2015-01-30T20:49:38.842Z,1422650978.842 [Module Loader](DEBUG): Loading Module at Modules/Sensor.so
2015-01-30T20:49:39.161Z,1422650979.161 [AHRS_sp3003D] Loaded
2015-01-30T20:49:39.161Z,1422650979.161 [ComponentRegistry](DEBUG): SyncComponent "AHRS_sp3003D" handled in the control thread.
2015-01-30T20:49:39.233Z,1422650979.233 [DataOverHttps] Loaded
2015-01-30T20:49:39.233Z,1422650979.233 [ComponentRegistry](DEBUG): SyncComponent "DataOverHttps" handled in the control thread.
2015-01-30T20:49:39.247Z,1422650979.247 [Depth_Keller] Loaded
2015-01-30T20:49:39.247Z,1422650979.247 [ComponentRegistry](DEBUG): SyncComponent "Depth_Keller" handled in the control thread.
2015-01-30T20:49:39.252Z,1422650979.252 [DropWeight] Loaded
2015-01-30T20:49:39.252Z,1422650979.253 [ComponentRegistry](DEBUG): SyncComponent "DropWeight" handled in the control thread.
2015-01-30T20:49:39.389Z,1422650979.389 [DVL_micro] Loaded
2015-01-30T20:49:39.390Z,1422650979.390 [ComponentRegistry](DEBUG): SyncComponent "DVL_micro" handled in the control thread.
2015-01-30T20:49:39.486Z,1422650979.486 [NAL9602] Loaded
2015-01-30T20:49:39.486Z,1422650979.486 [ComponentRegistry](DEBUG): SyncComponent "NAL9602" handled in the control thread.
2015-01-30T20:49:39.528Z,1422650979.528 [Onboard] Loaded
2015-01-30T20:49:39.529Z,1422650979.529 [ComponentRegistry](DEBUG): SyncComponent "Onboard" handled in the control thread.
2015-01-30T20:49:39.536Z,1422650979.536 [Radio_Surface] Loaded
2015-01-30T20:49:39.536Z,1422650979.536 [ComponentRegistry](DEBUG): Component "Radio_Surface" handled in its own thread.
2015-01-30T20:49:39.537Z,1422650979.537 [Radio_Surface ThreadHandler](DEBUG): Created PCaller Thread at 407ED4E0
2015-01-30T20:49:39.538Z,1422650979.538 [Radio_Surface ThreadHandler](INFO): Protected caller Thread ID is 1369
2015-01-30T20:49:41.420Z,1422650981.420 [BPC1] Loaded
2015-01-30T20:49:41.420Z,1422650981.420 [ComponentRegistry](DEBUG): SyncComponent "BPC1" handled in the control thread.
2015-01-30T20:49:41.421Z,1422650981.421 [Module Loader](DEBUG): Loaded Module: Sensor (Contains the sensor components)
2015-01-30T20:49:41.421Z,1422650981.421 [Module Loader](DEBUG): Loading Module at Modules/Servo.so
2015-01-30T20:49:41.520Z,1422650981.520 [BuoyancyServo] Loaded
2015-01-30T20:49:41.521Z,1422650981.521 [ComponentRegistry](DEBUG): SyncComponent "BuoyancyServo" handled in the control thread.
2015-01-30T20:49:41.533Z,1422650981.533 [ElevatorServo] Loaded
2015-01-30T20:49:41.533Z,1422650981.533 [ComponentRegistry](DEBUG): SyncComponent "ElevatorServo" handled in the control thread.
2015-01-30T20:49:41.545Z,1422650981.545 [MassServo] Loaded
2015-01-30T20:49:41.545Z,1422650981.545 [ComponentRegistry](DEBUG): SyncComponent "MassServo" handled in the control thread.
2015-01-30T20:49:41.557Z,1422650981.557 [RudderServo] Loaded
2015-01-30T20:49:41.557Z,1422650981.557 [ComponentRegistry](DEBUG): SyncComponent "RudderServo" handled in the control thread.
2015-01-30T20:49:41.569Z,1422650981.569 [ThrusterServo] Loaded
2015-01-30T20:49:41.569Z,1422650981.569 [ComponentRegistry](DEBUG): SyncComponent "ThrusterServo" handled in the control thread.
2015-01-30T20:49:41.570Z,1422650981.570 [Module Loader](DEBUG): Loaded Module: Servo (This is the module containing motor controllers)
2015-01-30T20:49:41.570Z,1422650981.570 [Module Loader](DEBUG): Loading Module at Modules/Simulator.so
2015-01-30T20:49:41.676Z,1422650981.676 [Module Loader](DEBUG): Loaded Module: Simulator (This is the module containing the Simulator)
2015-01-30T20:49:41.677Z,1422650981.677 [Module Loader](DEBUG): Loading Module at Modules/Trigger.so
2015-01-30T20:49:41.702Z,1422650981.702 [Module Loader](DEBUG): Loaded Module: Trigger (Contains triggers for use in missions)
2015-01-30T20:49:41.704Z,1422650981.704 [ComponentRegistry](DEBUG): SyncComponent "MissionManager" handled in the control thread.
2015-01-30T20:49:41.705Z,1422650981.705 [ComponentRegistry](DEBUG): SyncComponent "Reporter" handled in the control thread.
2015-01-30T20:49:41.711Z,1422650981.711 [ComponentRegistry](DEBUG): Component "NavChartDb" handled in its own thread.
2015-01-30T20:49:41.712Z,1422650981.712 [NavChartDb ThreadHandler](DEBUG): Created PCaller Thread at 4089E4E0
2015-01-30T20:49:41.713Z,1422650981.713 [NavChartDb ThreadHandler](INFO): Protected caller Thread ID is 1370
2015-01-30T20:49:41.717Z,1422650981.717 [Supervisor](INFO): Main Thread ID is 762
2015-01-30T20:49:41.717Z,1422650981.717 [Supervisor](DEBUG): Running supervisor.
2015-01-30T20:49:41.718Z,1422650981.718 [CommandLine ThreadHandler](INFO): Handler Thread ID is 1371
2015-01-30T20:49:41.721Z,1422650981.721 [controlThread ThreadHandler](INFO): Handler Thread ID is 1372
2015-01-30T20:49:41.721Z,1422650981.721 [controlThread](DEBUG): Initializing ControlThread
2015-01-30T20:49:41.722Z,1422650981.722 [VerticalControl](DEBUG): Initialize VerticalControlComponent.
2015-01-30T20:49:41.724Z,1422650981.724 [HorizontalControl](DEBUG): Initialize HorizontalControlComponent.
2015-01-30T20:49:41.725Z,1422650981.725 [SpeedControl](DEBUG): Initialize SpeedControlComponent.
2015-01-30T20:49:41.725Z,1422650981.725 [LoopControl](DEBUG): Initialize LoopControlComponent.
2015-01-30T20:49:41.725Z,1422650981.725 [SBIT](INFO): Initialize SBIT Component.
2015-01-30T20:49:41.726Z,1422650981.726 [SBIT](IMPORTANT): Tethys CM Info: SVN revision:11998
2015-01-30T20:49:41.726Z,1422650981.726 [SBIT](IMPORTANT): Kernel Release: 2.6.27.8
2015-01-30T20:49:41.726Z,1422650981.726 [SBIT](IMPORTANT): Kernel Version:#639 PREEMPT Wed Mar 12 12:53:33 PDT 2014
2015-01-30T20:49:41.727Z,1422650981.727 [IBIT](INFO): Initialize IBIT Component.
2015-01-30T20:49:41.728Z,1422650981.728 [CBIT](DEBUG): Initialize CBIT Component.
2015-01-30T20:49:41.728Z,1422650981.728 [CBIT](INFO): Last reboot was NOT due to watchdog timer.
2015-01-30T20:49:41.729Z,1422650981.729 [logger ThreadHandler](INFO): Handler Thread ID is 1373
2015-01-30T20:49:41.749Z,1422650981.749 [CTD_NeilBrown ThreadHandler](INFO): Handler Thread ID is 1374
2015-01-30T20:49:41.750Z,1422650981.750 [CTD_NeilBrown](DEBUG): Initializing CTD_NeilBrown.
2015-01-30T20:49:41.753Z,1422650981.753 [DepthRateCalculator](DEBUG): Initializing DepthRateCalculator.
2015-01-30T20:49:41.753Z,1422650981.753 [PitchRateCalculator](DEBUG): Initializing PitchRateCalculator.
2015-01-30T20:49:41.754Z,1422650981.754 [SpeedCalculator](DEBUG): Initializing SpeedCalculator.
2015-01-30T20:49:41.754Z,1422650981.754 [TempGradientCalculator](DEBUG): Initializing TempGradientCalculator.
2015-01-30T20:49:41.754Z,1422650981.754 [YawRateCalculator](DEBUG): Initializing YawRateCalculator.
2015-01-30T20:49:41.755Z,1422650981.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2015-01-30T20:49:41.755Z,1422650981.755 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2015-01-30T20:49:41.755Z,1422650981.755 [NavChart](DEBUG): Initialize NavChart Navigation.
2015-01-30T20:49:41.756Z,1422650981.756 [UniversalFixResidualReporter](DEBUG): Initializing UniversalFixResidualReporter component.
2015-01-30T20:49:41.770Z,1422650981.770 [MissionManager](INFO): Loading Mission: Missions/Startup.xml
2015-01-30T20:49:41.773Z,1422650981.773 [CTD_NeilBrown](INFO): Opening uart, block timeout 10ths=4
2015-01-30T20:49:41.782Z,1422650981.782 [WetLabsBB2FL ThreadHandler](INFO): Handler Thread ID is 1376
2015-01-30T20:49:41.784Z,1422650981.784 [WetLabsBB2FL](INFO): Powering down
2015-01-30T20:49:41.816Z,1422650981.816 [Startup:A.GoToSurface](DEBUG): Construct GoToSurface.
2015-01-30T20:49:41.818Z,1422650981.818 [Radio_Surface ThreadHandler](INFO): Handler Thread ID is 1377
2015-01-30T20:49:41.824Z,1422650981.824 [Radio_Surface](INFO): Powering up
2015-01-30T20:49:41.837Z,1422650981.837 [NavChartDb ThreadHandler](INFO): Handler Thread ID is 1378
2015-01-30T20:49:41.842Z,1422650981.842 [MissionManager](DEBUG): 
<?xml version="1.0" encoding="UTF-8"?>
<Mission xmlns="Tethys"
       xmlns:Control="Tethys/Control"
       xmlns:Guidance="Tethys/Guidance" 
       xmlns:Units="Tethys/Units"
       xmlns:Universal="Tethys/Universal"
       xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
       xsi:schemaLocation="Tethys http://aosn.mbari.org/tethys/Xml/Tethys.xsd
                           Tethys/Control http://aosn.mbari.org/tethys/Xml/Control.xsd
                           Tethys/Guidance http://aosn.mbari.org/tethys/Xml/Guidance.xsd
                           Tethys/Units http://aosn.mbari.org/tethys/Xml/Units.xsd
                           Tethys/Universal http://aosn.mbari.org/tethys/Xml/Universal.xsd"
       Id="Startup">

    <Guidance:GoToSurface>
        <Progression/>
    </Guidance:GoToSurface>

    <Aggregate Id="StartupSatComms">

        <Sequence/>

        <ReadDatum>
            <Timeout Duration="P1M" />
            <Universal:latitude_fix/>
        </ReadDatum>

        <ReadDatum>
            <Timeout Duration="P1M" />
            <Universal:platform_communications/>
        </ReadDatum>

    </Aggregate>

</Mission>


2015-01-30T20:49:41.843Z,1422650981.843 [MissionManager](INFO): Loading Mission: Missions/Default.xml
2015-01-30T20:49:41.847Z,1422650981.847 [NavChartDb](INFO): Looking for Electronic Nav Chart files in directory: Resources
2015-01-30T20:49:41.849Z,1422650981.849 [NavChartDb](INFO): Already Loaded Electronic Nav Chart data from US1WC07M.000
2015-01-30T20:49:41.849Z,1422650981.849 [NavChartDb](INFO): Already Loaded Electronic Nav Chart data from US2WC11M.000
2015-01-30T20:49:41.850Z,1422650981.850 [NavChartDb](INFO): Already Loaded Electronic Nav Chart data from US3CA52M.000
2015-01-30T20:49:41.850Z,1422650981.850 [NavChartDb](INFO): Already Loaded Electronic Nav Chart data from US4CA60M.000
2015-01-30T20:49:41.850Z,1422650981.850 [NavChartDb](INFO): Already Loaded Electronic Nav Chart data from US5CA50M.000
2015-01-30T20:49:41.851Z,1422650981.851 [NavChartDb](INFO): Already Loaded Electronic Nav Chart data from US5CA61M.000
2015-01-30T20:49:41.851Z,1422650981.851 [NavChartDb](INFO): Already Loaded Electronic Nav Chart data from US5CA62M.000
2015-01-30T20:49:41.851Z,1422650981.851 [NavChartDb](INFO): Already Loaded Electronic Nav Chart data from US5CA83M.000
2015-01-30T20:49:41.966Z,1422650981.966 [MissionManager](INFO): DefineArg Default.TimeMissionWasStarted = 0.000000 h
2015-01-30T20:49:41.978Z,1422650981.978 [MissionManager](INFO): DefineArg Default.ElapsedSinceMissionWasStarted = 0.000000 h
2015-01-30T20:49:41.990Z,1422650981.990 [Default:B.GoToSurface](DEBUG): Construct GoToSurface.
2015-01-30T20:49:42.015Z,1422650982.015 [Default:CheckIn:A.SetSpeed](DEBUG): Construct.
2015-01-30T20:49:42.030Z,1422650982.030 [Default:CheckIn:Read_Iridium:A_Timeout:A.Execute](DEBUG): Construct Execute.
2015-01-30T20:49:42.070Z,1422650982.070 [Default:WaitAtTheSurface:RunApplicationAtLowSpeed.SetSpeed](DEBUG): Construct.
2015-01-30T20:49:42.076Z,1422650982.076 [MissionManager](DEBUG): 
<?xml version="1.0" encoding="UTF-8"?>
<Mission xmlns="Tethys"
xmlns:Control="Tethys/Control"
xmlns:Guidance="Tethys/Guidance" 
xmlns:Units="Tethys/Units"
xmlns:Universal="Tethys/Universal"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:schemaLocation="Tethys http://aosn.mbari.org/tethys/Xml/Tethys.xsd
Tethys/Control http://aosn.mbari.org/tethys/Xml/Control.xsd
Tethys/Guidance http://aosn.mbari.org/tethys/Xml/Guidance.xsd
Tethys/Units http://aosn.mbari.org/tethys/Xml/Units.xsd
Tethys/Universal http://aosn.mbari.org/tethys/Xml/Universal.xsd"
Id="Default">

    <DefineArg Name="TimeMissionWasStarted"><Units:hour/><Value>0</Value></DefineArg>

    <DefineArg Name="ElapsedSinceMissionWasStarted"><Units:hour/><Value>0</Value></DefineArg>

    <Aggregate Id="StartClock">

        <Sequence/>

        <Assign><Arg Name="TimeMissionWasStarted"/><Universal:time/></Assign>

    </Aggregate>

    <Guidance:GoToSurface>
        <Progression/>
    </Guidance:GoToSurface>

    <Aggregate Id="CheckIn">

        <When>
            <Elapsed><Universal:platform_communications/></Elapsed>
            <Gt><Units:minute/><Value>5.0</Value></Gt>
            <And><Universal:platform_conversation/><Eq><True/></Eq></And>
            <Or><Elapsed><Universal:platform_communications/></Elapsed><Gt><Units:hour/><Value>1.0</Value></Gt></Or>
        </When>

<!-- TODO: Do we really want this When operating on platform_communications? or on something else like time_fix? -->

<!-- Run application at high speed -->

        <Guidance:SetSpeed>
            <Parallel/>
            <Setting><Guidance:SetSpeed.period/><Units:millisecond/><Value>400</Value></Setting>
        </Guidance:SetSpeed>

        <ReadDatum Id="Read_GPS">
            <Timeout Duration="P5M"/>
<!-- NOTE: Original Default.xml didn't have a timeout on the GPS read, so theoretically could have hung indefinitely there... -->
            <Universal:latitude_fix/>
        </ReadDatum>

<!-- Do data comms -->

        <ReadDatum Id="Read_Iridium">
            <Timeout Duration="P2H">
                <Guidance:Execute>
                    <Sequence/>
                    <Setting><Guidance:Execute.command/><String>Burn 300</String></Setting>
                </Guidance:Execute>
                <Syslog Severity="Critical">Dropped drop weight due to communications timeout</Syslog>
            </Timeout>
            <Universal:platform_communications/>
        </ReadDatum>

    </Aggregate>

    <Aggregate Id="UpdateAndReportMinutesSinceMissionStarted">

        <When>
            <Elapsed><Arg Name="ElapsedSinceMissionWasStarted"/></Elapsed>
            <Gt><Units:minute/><Value>5.0</Value></Gt>
        </When>

        <Assign><Arg Name="ElapsedSinceMissionWasStarted"/><Universal:time/><Sub><Arg Name="TimeMissionWasStarted"/></Sub></Assign>

        <Syslog Severity="Important">Default mission has been running for <Arg Name="ElapsedSinceMissionWasStarted"/><Units:minute/></Syslog>

    </Aggregate>

    <Aggregate Id="WaitAtTheSurface">

        <Sequence/>

        <Guidance:SetSpeed Id="RunApplicationAtLowSpeed">
            <Parallel/>
            <Setting><Guidance:SetSpeed.period/><Units:second/><Value>5</Value></Setting>
        </Guidance:SetSpeed>

    </Aggregate>

</Mission>


2015-01-30T20:49:42.082Z,1422650982.082 [controlThread](DEBUG): Component order: CycleStarter,Aanderaa_O2,ISUS,PAR_Licor,AHRS_sp3003D,DataOverHttps,Depth_Keller,DropWeight,DVL_micro,NAL9602,Onboard,BPC1,PAR_Licor,Depth_Keller,DepthRateCalculator,PitchRateCalculator,SpeedCalculator,TempGradientCalculator,YawRateCalculator,DeadReckonUsingMultipleVelocitySources,DeadReckonUsingSpeedCalculator,NavChart,UniversalFixResidualReporter,MissionManager,VerticalControl,HorizontalControl,SpeedControl,LoopControl,BuoyancyServo,ElevatorServo,MassServo,RudderServo,ThrusterServo,SBIT,IBIT,CBIT,Reporter,LogSplitter,
2015-01-30T20:49:42.259Z,1422650982.259 [AHRS_sp3003D](DEBUG): Initializing AHRS_sp3003D.
2015-01-30T20:49:42.305Z,1422650982.305 [Depth_Keller](ERROR): Pressure reading out of range: 1831.023193 decibar
2015-01-30T20:49:42.359Z,1422650982.359 [DVL_micro](INFO): Initializing
2015-01-30T20:49:42.540Z,1422650982.540 [DepthRateCalculator](ERROR): Depth measurement is not active
2015-01-30T20:49:42.651Z,1422650982.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T20:49:42.662Z,1422650982.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-30T20:49:42.767Z,1422650982.767 [BuoyancyServo](DEBUG): Initializing EZServoServo.
2015-01-30T20:49:42.775Z,1422650982.775 [BuoyancyServo](DEBUG): Initializing BuoyancyServo.
2015-01-30T20:49:42.781Z,1422650982.781 [ElevatorServo](DEBUG): Initializing EZServoServo.
2015-01-30T20:49:42.787Z,1422650982.787 [ElevatorServo](DEBUG): Initializing ElevatorServo.
2015-01-30T20:49:42.793Z,1422650982.793 [MassServo](DEBUG): Initializing EZServoServo.
2015-01-30T20:49:42.799Z,1422650982.799 [MassServo](DEBUG): Initializing MassServo.
2015-01-30T20:49:42.805Z,1422650982.805 [RudderServo](DEBUG): Initializing EZServoServo.
2015-01-30T20:49:42.811Z,1422650982.811 [RudderServo](DEBUG): Initializing RudderServo.
2015-01-30T20:49:42.817Z,1422650982.817 [ThrusterServo](DEBUG): Initializing EZServoServo.
2015-01-30T20:49:42.823Z,1422650982.823 [ThrusterServo](DEBUG): Initializing ThrusterServo.
2015-01-30T20:49:43.154Z,1422650983.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T20:49:43.155Z,1422650983.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-30T20:49:43.465Z,1422650983.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 2 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T20:49:43.466Z,1422650983.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-30T20:49:44.163Z,1422650984.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 3 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T20:49:44.164Z,1422650984.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-30T20:49:44.564Z,1422650984.564 [NAL9602](INFO): Powering up NAL9602
2015-01-30T20:49:44.582Z,1422650984.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 4 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T20:49:44.583Z,1422650984.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-30T20:49:44.750Z,1422650984.750 [Aanderaa_O2](INFO): Powering down
2015-01-30T20:49:45.186Z,1422650985.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 5 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T20:49:45.187Z,1422650985.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-30T20:49:45.753Z,1422650985.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): All data for platform velocity is invalid.
2015-01-30T20:49:45.754Z,1422650985.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-30T20:49:46.220Z,1422650986.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): All data for platform velocity is invalid.
2015-01-30T20:49:46.221Z,1422650986.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-30T20:49:46.700Z,1422650986.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): All data for platform velocity is invalid.
2015-01-30T20:49:46.709Z,1422650986.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-30T20:49:47.395Z,1422650987.395 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:49:47.430Z,1422650987.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): All data for platform velocity is invalid.
2015-01-30T20:49:47.432Z,1422650987.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-30T20:49:48.013Z,1422650988.013 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:49:48.049Z,1422650988.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-30T20:49:48.453Z,1422650988.453 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:49:48.481Z,1422650988.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-30T20:49:48.886Z,1422650988.886 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:49:48.969Z,1422650988.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-30T20:49:49.383Z,1422650989.383 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:49:49.410Z,1422650989.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-30T20:49:49.799Z,1422650989.799 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:49:49.831Z,1422650989.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-30T20:49:50.264Z,1422650990.264 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:49:50.532Z,1422650990.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-30T20:49:51.029Z,1422650991.029 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:49:51.065Z,1422650991.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-30T20:49:51.450Z,1422650991.450 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:49:51.733Z,1422650991.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-30T20:49:52.199Z,1422650992.199 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:49:52.273Z,1422650992.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-30T20:49:52.696Z,1422650992.696 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:49:52.736Z,1422650992.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-30T20:49:53.132Z,1422650993.132 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:49:53.164Z,1422650993.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-30T20:49:53.570Z,1422650993.570 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:49:53.841Z,1422650993.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-30T20:49:54.266Z,1422650994.266 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:49:54.294Z,1422650994.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-30T20:49:54.699Z,1422650994.699 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:49:54.771Z,1422650994.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-30T20:49:55.165Z,1422650995.165 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:49:55.215Z,1422650995.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-30T20:49:55.628Z,1422650995.628 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:49:55.713Z,1422650995.713 [NAL9602](INFO): NAL9602 initialized
2015-01-30T20:49:55.795Z,1422650995.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-30T20:49:56.193Z,1422650996.193 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:49:56.228Z,1422650996.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-30T20:49:56.618Z,1422650996.618 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:49:56.705Z,1422650996.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-30T20:49:57.179Z,1422650997.179 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:49:57.320Z,1422650997.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-30T20:49:57.344Z,1422650997.344 [SBIT](IMPORTANT): Beginning Startup BIT
2015-01-30T20:49:57.355Z,1422650997.355 [CBIT](IMPORTANT): Beginning GF scan
2015-01-30T20:49:57.728Z,1422650997.728 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:49:57.794Z,1422650997.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-30T20:49:58.204Z,1422650998.204 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:49:58.227Z,1422650998.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-30T20:49:58.637Z,1422650998.637 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:49:58.669Z,1422650998.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-30T20:49:59.090Z,1422650999.090 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:49:59.157Z,1422650999.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-30T20:49:59.644Z,1422650999.644 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:49:59.685Z,1422650999.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-30T20:50:00.496Z,1422651000.496 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:50:00.517Z,1422651000.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-30T20:50:01.001Z,1422651001.001 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:50:01.023Z,1422651001.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-30T20:50:01.582Z,1422651001.582 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:50:01.617Z,1422651001.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-30T20:50:02.030Z,1422651002.030 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:50:02.070Z,1422651002.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-30T20:50:02.527Z,1422651002.527 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:50:02.696Z,1422651002.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-30T20:50:03.162Z,1422651003.162 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:50:03.215Z,1422651003.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-30T20:50:03.677Z,1422651003.677 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:50:03.736Z,1422651003.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-30T20:50:04.206Z,1422651004.206 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:50:04.229Z,1422651004.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-30T20:50:04.699Z,1422651004.699 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:50:04.729Z,1422651004.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-30T20:50:05.195Z,1422651005.195 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:50:05.226Z,1422651005.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-30T20:50:05.680Z,1422651005.680 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:50:05.735Z,1422651005.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-30T20:50:06.197Z,1422651006.197 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:50:06.298Z,1422651006.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-30T20:50:06.754Z,1422651006.754 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:50:06.817Z,1422651006.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-30T20:50:07.278Z,1422651007.278 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:50:07.338Z,1422651007.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-30T20:50:07.803Z,1422651007.803 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:50:07.830Z,1422651007.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-30T20:50:08.304Z,1422651008.304 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:50:08.396Z,1422651008.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-30T20:50:08.857Z,1422651008.857 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:50:08.876Z,1422651008.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-30T20:50:09.347Z,1422651009.347 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:50:09.465Z,1422651009.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-30T20:50:09.914Z,1422651009.914 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:50:09.968Z,1422651009.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-30T20:50:10.423Z,1422651010.423 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:50:10.494Z,1422651010.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-30T20:50:10.620Z,1422651010.620 [SBIT](FAULT): Mass: EXPECTED:0.005000 ACTUAL:0.004720
2015-01-30T20:50:10.957Z,1422651010.957 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:50:10.980Z,1422651010.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-30T20:50:11.485Z,1422651011.485 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:50:11.536Z,1422651011.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-30T20:50:11.990Z,1422651011.990 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:50:12.061Z,1422651012.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-30T20:50:12.487Z,1422651012.487 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:50:12.548Z,1422651012.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-30T20:50:12.988Z,1422651012.988 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:50:13.028Z,1422651013.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-30T20:50:13.516Z,1422651013.516 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:50:13.519Z,1422651013.519 [NAL9602](INFO): SBD MO Status=0, MOMSN=47148, MT Status=0, MTMSN=0
2015-01-30T20:50:13.519Z,1422651013.519 [NAL9602](INFO): No messages in MT queue
2015-01-30T20:50:13.535Z,1422651013.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-30T20:50:13.997Z,1422651013.997 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:50:14.032Z,1422651014.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-30T20:50:14.470Z,1422651014.470 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:50:14.528Z,1422651014.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-30T20:50:14.970Z,1422651014.970 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:50:15.025Z,1422651015.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-30T20:50:15.463Z,1422651015.463 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:50:15.529Z,1422651015.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-30T20:50:15.972Z,1422651015.972 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:50:16.097Z,1422651016.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-30T20:50:16.525Z,1422651016.525 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:50:16.545Z,1422651016.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-30T20:50:17.038Z,1422651017.038 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:50:17.078Z,1422651017.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-30T20:50:17.567Z,1422651017.567 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:50:17.585Z,1422651017.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-30T20:50:18.123Z,1422651018.123 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:50:18.202Z,1422651018.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-30T20:50:18.669Z,1422651018.669 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:50:18.707Z,1422651018.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-30T20:50:19.225Z,1422651019.225 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:50:19.329Z,1422651019.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-30T20:50:19.718Z,1422651019.718 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:50:19.745Z,1422651019.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-30T20:50:20.150Z,1422651020.150 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:50:20.182Z,1422651020.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-30T20:50:20.599Z,1422651020.599 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:50:20.638Z,1422651020.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-30T20:50:21.040Z,1422651021.040 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:50:21.084Z,1422651021.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-30T20:50:21.476Z,1422651021.476 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:50:21.504Z,1422651021.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-30T20:50:21.918Z,1422651021.918 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:50:21.977Z,1422651021.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-30T20:50:22.382Z,1422651022.382 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:50:22.431Z,1422651022.431 [NAL9602](IMPORTANT): GPS fix at: 1422651020.00
2015-01-30T20:50:22.910Z,1422651022.910 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:50:23.375Z,1422651023.375 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:50:23.393Z,1422651023.393 [BPC1](ERROR): A bank expecting battery number:1 and read number: uart read:X
$S,01,3C24,02,00,04,64%20
$C1,01,7F,02,00,03,7F,04,00,05,00,06,00,07,00%72
$B11,0A,FFFC%36
$B12,0A,FFFD%32
$B13,0A,FFFB%35
$B14,0A,0000%36
$B15,0A,0000%37
$B16,0A,0000%34
$B17,0A,FF3B%44
$S,01,3424,02,00,04,64%57
$C1,01,7F,02,00,03,7F,04,00,05,00,06,00,07,00%72
$B11,02,000A,01,02A8,03,0001,08,0B8B,09,4128,0A,FFFC,0B,FFFC%4C
$B11,0C,0001,0D,0064,0E,005F,0F,1928,10,192C,11,FFFF,12,FFFF%4F
$B11,13,FFFF,14,0000,15,41A0,16,00E0,17,0001,18,1A90,19,3840%37
$B11,1A,0031,1B,458B,1C,0091%42
$B12,02,000A,01,02A8,03,0001,08,0B89,09,4121,0A,FFFD,0B,FFFD%3D
$B12,0C,0001,0D,0064,0E,0060,0F,193E,10,1940,11,FFFF,12,FFFF%30
$B12,13,FFFF,14,0000,15,41A0,16,00E0,17,0001,18,1A90,19,3840%34
$B12,1A,0031,1B,458F,1C,0153%4A
$B13,02,000A,01,02A8,03,0001,08,0B85,09,412B,0A,FFFB,0B,FFFB%43
$B13,0C,0001,0D,0064,0E,005E,0F,18F3,10,18F7,11,FFFF,12,FFFF%31
$B13,13,FFFF,14,0000,15,41A0,16,00E0,17,0001,18,1A90,19,3840%35
$B13,1A,0031,1B,458B,1C,00AF%4F
$B14,02,000A,01,02A8,03,0001,08,0B7E,09,4125,0A,FFFD,0B,FFFF%4E
$B14,0C,0001,0D,0064,0E,0060,0F,1975,10,1975,11,FFFF,12,FFFF%44
$B14,13,FFFF,14,0000,15,41A0,16,00E0,17,0001,18,1A90,19,3840%32
$B14,1A,0031,1B,458F,1C,0151%4E
$B15,02,000A,01,02A8,03,0001,08,0B8F,09,40EA,0A,0000,0B,0000%43
$B15,0C,0001,0D,0064,0E,0062,0F,19CE,10,19CE,11,FFFF,12,FFFF%47
$B15,13,FFFF,14,0000,15,41A0,16,00E0,17,0001,18,1A90,19,3840%33
$B15,1A,0031,1B,458C,1C,00DC%48
$B16,02,000A,01,02A8,03,0001,08,0B7C,09,40EB,0A,0000,0B,0000%49
$B16,0C,0001,0D,0064,0E,0060,0F,194A,10,194A,11,FFFF,12,FFFF%46
$B16,13,FFFF,14,0000,15,41A0,16,00E0,17,0001,18,1A90,19,3840%30
$B16,1A,0031,1B,458B,1C,00BA%4E
$B17,02,000A,01,02A8,03,0001,08,0B76,09,407E,0A,FF3F,0B,FF4E%4C
$B17,0C,0001,0D,0063,0E,005D,0F,1883,10,18ED,11,079F,12,0843%4A
$B17,13,FFFF,14,0000,15,41A0,16,00E0,17,0001,18,1A90,19,3840%31
$B17,1A,0031,1B,458C,1C,00DA%48

2015-01-30T20:50:23.393Z,1422651023.393 [BPC1](FAULT): Failed to parse bank A battery data
2015-01-30T20:50:23.393Z,1422651023.393 [BPC1] Data Fault, FailCount= 1
2015-01-30T20:50:23.394Z,1422651023.394 [BPC1](ERROR): Data Fault
2015-01-30T20:50:23.566Z,1422651023.566 [CBIT](ERROR): Data Fault in component: BPC1
2015-01-30T20:50:23.948Z,1422651023.948 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:50:24.029Z,1422651024.029 [CBIT](IMPORTANT): No ground fault detected
2015-01-30T20:50:24.413Z,1422651024.413 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:50:24.841Z,1422651024.841 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:50:24.904Z,1422651024.904 [CBIT](INFO): Clearing failed state for component BPC1
2015-01-30T20:50:24.904Z,1422651024.904 [BPC1] No Fault, FailCount= 1
2015-01-30T20:50:25.274Z,1422651025.274 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:50:25.795Z,1422651025.795 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:50:26.324Z,1422651026.324 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:50:26.756Z,1422651026.756 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:50:27.185Z,1422651027.185 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:50:27.618Z,1422651027.618 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:50:28.042Z,1422651028.042 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:50:28.471Z,1422651028.471 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:50:28.896Z,1422651028.896 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:50:29.408Z,1422651029.408 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:50:29.857Z,1422651029.857 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:50:29.858Z,1422651029.858 [NAL9602](INFO): Powering down
2015-01-30T20:50:30.378Z,1422651030.378 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:50:30.823Z,1422651030.823 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:50:31.256Z,1422651031.256 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:50:31.736Z,1422651031.736 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:50:32.177Z,1422651032.177 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:50:32.686Z,1422651032.686 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:50:33.114Z,1422651033.114 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:50:33.539Z,1422651033.539 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:50:33.980Z,1422651033.980 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:50:34.441Z,1422651034.441 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:50:34.865Z,1422651034.865 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:50:35.294Z,1422651035.294 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:50:35.822Z,1422651035.822 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:50:36.275Z,1422651036.275 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:50:36.696Z,1422651036.696 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:50:37.132Z,1422651037.132 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:50:37.553Z,1422651037.553 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:50:37.957Z,1422651037.957 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:50:38.391Z,1422651038.391 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:50:38.841Z,1422651038.841 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:50:39.288Z,1422651039.288 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:50:39.837Z,1422651039.837 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:50:40.686Z,1422651040.686 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:50:41.203Z,1422651041.203 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:50:41.663Z,1422651041.663 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:50:42.188Z,1422651042.188 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:50:42.754Z,1422651042.754 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:50:43.394Z,1422651043.394 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:50:43.819Z,1422651043.819 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:50:44.243Z,1422651044.243 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:50:44.663Z,1422651044.663 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:50:45.077Z,1422651045.077 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:50:45.562Z,1422651045.562 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:50:45.982Z,1422651045.982 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:50:46.495Z,1422651046.495 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:50:46.927Z,1422651046.927 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:50:47.340Z,1422651047.340 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:50:47.761Z,1422651047.761 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:50:48.177Z,1422651048.177 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:50:48.655Z,1422651048.655 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:50:49.079Z,1422651049.079 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:50:49.487Z,1422651049.487 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:50:49.913Z,1422651049.913 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:50:50.325Z,1422651050.325 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:50:50.741Z,1422651050.741 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:50:51.166Z,1422651051.166 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:50:51.242Z,1422651051.242 [SBIT](CRITICAL): SBIT FAILED
2015-01-30T20:50:51.244Z,1422651051.244 [CommandLine](FAULT): Scheduling is paused
2015-01-30T20:50:51.607Z,1422651051.607 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:50:51.648Z,1422651051.648 [MissionManager](IMPORTANT): Started mission Startup
2015-01-30T20:50:51.648Z,1422651051.648 [Startup] Running Loop=1
2015-01-30T20:50:51.648Z,1422651051.648 [Startup](INFO): Aggregate::initialize Startup
2015-01-30T20:50:51.648Z,1422651051.648 [Startup:A.GoToSurface] Running Loop=1
2015-01-30T20:50:51.648Z,1422651051.648 [Startup:A.GoToSurface](DEBUG): Initialize GoToSurfaceComponent.
2015-01-30T20:50:51.649Z,1422651051.649 [Startup:A.GoToSurface](DEBUG): No depth rate setting specified. Using default value of nan m/s.
2015-01-30T20:50:51.665Z,1422651051.665 [Startup:A.GoToSurface](DEBUG): No pitch setting specified. Using default value of nan degrees.
2015-01-30T20:50:51.666Z,1422651051.666 [Startup:A.GoToSurface](DEBUG): No speed setting specified. Using default value of 0.500000 m/s.
2015-01-30T20:50:51.676Z,1422651051.676 [Startup:StartupSatComms] Running Loop=1
2015-01-30T20:50:51.676Z,1422651051.676 [Startup:StartupSatComms](INFO): Aggregate::initialize Startup:StartupSatComms
2015-01-30T20:50:51.676Z,1422651051.676 [Startup:StartupSatComms:A] Running Loop=1
2015-01-30T20:50:52.060Z,1422651052.060 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:50:52.078Z,1422651052.078 [Startup:StartupSatComms:A](DEBUG): Initialize ReadDataComponent to sense latitude_fix
2015-01-30T20:50:52.484Z,1422651052.484 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:50:52.485Z,1422651052.485 [NAL9602](INFO): Powering up
2015-01-30T20:50:52.901Z,1422651052.901 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:50:53.369Z,1422651053.369 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:50:54.123Z,1422651054.123 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:50:54.579Z,1422651054.579 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:50:55.020Z,1422651055.020 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:50:55.497Z,1422651055.497 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:50:55.941Z,1422651055.941 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:50:56.374Z,1422651056.374 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:50:56.787Z,1422651056.787 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:50:57.220Z,1422651057.220 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:50:57.642Z,1422651057.642 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:50:58.081Z,1422651058.081 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:50:58.537Z,1422651058.537 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:50:59.046Z,1422651059.046 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:50:59.464Z,1422651059.464 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:50:59.879Z,1422651059.879 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:51:00.301Z,1422651060.301 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:51:00.720Z,1422651060.720 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:51:01.133Z,1422651061.133 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:51:01.594Z,1422651061.594 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:51:02.024Z,1422651062.024 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:51:02.441Z,1422651062.441 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:51:02.868Z,1422651062.868 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:51:03.293Z,1422651063.293 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:51:03.733Z,1422651063.733 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:51:03.734Z,1422651063.734 [NAL9602](INFO): NAL9602 initialized
2015-01-30T20:51:04.150Z,1422651064.150 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:51:04.611Z,1422651064.611 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:51:05.044Z,1422651065.044 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:51:05.484Z,1422651065.484 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:51:05.925Z,1422651065.925 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:51:06.338Z,1422651066.338 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:51:06.802Z,1422651066.802 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:51:07.231Z,1422651067.231 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:51:07.692Z,1422651067.692 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:51:08.160Z,1422651068.160 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:51:08.577Z,1422651068.577 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:51:09.010Z,1422651069.010 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:51:09.479Z,1422651069.479 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:51:09.903Z,1422651069.903 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:51:10.368Z,1422651070.368 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:51:10.857Z,1422651070.857 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:51:11.281Z,1422651071.281 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:51:11.715Z,1422651071.715 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:51:12.140Z,1422651072.140 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:51:12.551Z,1422651072.551 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:51:12.968Z,1422651072.968 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:51:13.402Z,1422651073.402 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:51:13.850Z,1422651073.850 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:51:14.290Z,1422651074.290 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:51:14.719Z,1422651074.719 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:51:15.131Z,1422651075.131 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:51:15.596Z,1422651075.596 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:51:16.017Z,1422651076.017 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:51:16.417Z,1422651076.417 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:51:16.878Z,1422651076.878 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:51:17.303Z,1422651077.303 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:51:17.715Z,1422651077.715 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:51:18.128Z,1422651078.128 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:51:18.573Z,1422651078.573 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:51:18.989Z,1422651078.989 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:51:19.414Z,1422651079.414 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:51:19.835Z,1422651079.835 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:51:20.291Z,1422651080.291 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:51:20.716Z,1422651080.716 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:51:21.133Z,1422651081.133 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:51:21.545Z,1422651081.545 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:51:21.970Z,1422651081.970 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:51:22.387Z,1422651082.387 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:51:22.834Z,1422651082.834 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:51:23.312Z,1422651083.312 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:51:23.769Z,1422651083.769 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:51:24.225Z,1422651084.225 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:51:24.659Z,1422651084.659 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:51:25.111Z,1422651085.111 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:51:25.560Z,1422651085.560 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:51:25.972Z,1422651085.972 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:51:26.385Z,1422651086.385 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:51:26.844Z,1422651086.844 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:51:27.286Z,1422651087.286 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:51:27.711Z,1422651087.711 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:51:28.127Z,1422651088.127 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:51:28.540Z,1422651088.540 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:51:28.953Z,1422651088.953 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:51:29.393Z,1422651089.393 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:51:29.850Z,1422651089.850 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:51:30.279Z,1422651090.279 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:51:30.691Z,1422651090.691 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:51:31.104Z,1422651091.104 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:51:31.533Z,1422651091.533 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:51:31.966Z,1422651091.966 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:51:32.382Z,1422651092.382 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:51:32.799Z,1422651092.799 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:51:33.251Z,1422651093.251 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:51:33.676Z,1422651093.676 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:51:34.097Z,1422651094.097 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:51:34.522Z,1422651094.522 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:51:34.938Z,1422651094.938 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:51:35.359Z,1422651095.359 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:51:35.796Z,1422651095.796 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:51:36.224Z,1422651096.224 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:51:36.713Z,1422651096.713 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:51:37.145Z,1422651097.145 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:51:37.586Z,1422651097.586 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:51:38.041Z,1422651098.041 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:51:38.459Z,1422651098.459 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:51:38.896Z,1422651098.896 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:51:39.353Z,1422651099.353 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:51:39.800Z,1422651099.800 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:51:40.250Z,1422651100.250 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:51:40.712Z,1422651100.712 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:51:41.144Z,1422651101.144 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:51:41.569Z,1422651101.569 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:51:41.985Z,1422651101.985 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:51:42.398Z,1422651102.398 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:51:42.862Z,1422651102.862 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:51:43.287Z,1422651103.287 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:51:43.696Z,1422651103.696 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:51:44.125Z,1422651104.125 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:51:44.545Z,1422651104.545 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:51:44.961Z,1422651104.961 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:51:45.412Z,1422651105.412 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:51:45.851Z,1422651105.851 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:51:46.325Z,1422651106.325 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:51:46.748Z,1422651106.748 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:51:47.173Z,1422651107.173 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:51:47.586Z,1422651107.586 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:51:48.006Z,1422651108.006 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:51:48.428Z,1422651108.428 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:51:48.881Z,1422651108.881 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:51:49.333Z,1422651109.333 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:51:49.749Z,1422651109.749 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:51:50.166Z,1422651110.166 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:51:50.590Z,1422651110.590 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:51:51.011Z,1422651111.011 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:51:51.432Z,1422651111.432 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:51:51.856Z,1422651111.856 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:51:51.895Z,1422651111.895 [Startup:StartupSatComms:A](INFO): Timed out from 2015-01-30T20:50:51.7Z
2015-01-30T20:51:51.896Z,1422651111.896 [Startup:StartupSatComms:A] Stopped
2015-01-30T20:51:51.896Z,1422651111.896 [Startup:StartupSatComms:B] Running Loop=1
2015-01-30T20:51:52.277Z,1422651112.277 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:51:52.398Z,1422651112.398 [Startup:StartupSatComms:B](DEBUG): Initialize ReadDataComponent to sense platform_communications
2015-01-30T20:51:52.998Z,1422651112.998 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:51:53.411Z,1422651113.411 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:51:53.867Z,1422651113.867 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:51:54.275Z,1422651114.275 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:51:54.725Z,1422651114.725 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:51:55.142Z,1422651115.142 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:51:55.582Z,1422651115.582 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:51:56.035Z,1422651116.035 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:51:56.459Z,1422651116.459 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:51:56.872Z,1422651116.872 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:51:57.305Z,1422651117.305 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:51:57.746Z,1422651117.746 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:51:58.170Z,1422651118.170 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:51:58.591Z,1422651118.591 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:51:59.059Z,1422651119.059 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:51:59.476Z,1422651119.476 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:51:59.908Z,1422651119.908 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:52:00.325Z,1422651120.325 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:52:00.742Z,1422651120.742 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:52:01.170Z,1422651121.170 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:52:01.611Z,1422651121.611 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:52:02.100Z,1422651122.100 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:52:02.525Z,1422651122.525 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:52:02.950Z,1422651122.950 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:52:03.367Z,1422651123.367 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:52:03.800Z,1422651123.800 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:52:04.216Z,1422651124.216 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:52:04.652Z,1422651124.652 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:52:05.097Z,1422651125.097 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:52:05.526Z,1422651125.526 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:52:05.942Z,1422651125.942 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:52:06.383Z,1422651126.383 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:52:06.804Z,1422651126.804 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:52:07.216Z,1422651127.216 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:52:07.709Z,1422651127.709 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:52:08.158Z,1422651128.158 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:52:08.607Z,1422651128.607 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:52:09.023Z,1422651129.023 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:52:09.484Z,1422651129.484 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:52:09.928Z,1422651129.928 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:52:10.357Z,1422651130.357 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:52:10.770Z,1422651130.770 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:52:11.210Z,1422651131.210 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:52:11.641Z,1422651131.641 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:52:12.064Z,1422651132.064 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:52:12.479Z,1422651132.479 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:52:12.901Z,1422651132.901 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:52:13.322Z,1422651133.322 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:52:13.733Z,1422651133.733 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:52:14.143Z,1422651134.143 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:52:14.611Z,1422651134.611 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:52:15.035Z,1422651135.035 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:52:15.453Z,1422651135.453 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:52:15.874Z,1422651135.874 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:52:16.286Z,1422651136.286 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:52:16.703Z,1422651136.703 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:52:17.124Z,1422651137.124 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:52:17.544Z,1422651137.544 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:52:18.005Z,1422651138.005 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:52:18.438Z,1422651138.438 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:52:18.854Z,1422651138.854 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:52:19.299Z,1422651139.299 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:52:19.728Z,1422651139.728 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:52:20.140Z,1422651140.140 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:52:20.560Z,1422651140.560 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:52:21.021Z,1422651141.021 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:52:21.482Z,1422651141.482 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:52:21.907Z,1422651141.907 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:52:22.360Z,1422651142.360 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:52:22.789Z,1422651142.789 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:52:23.253Z,1422651143.253 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:52:23.674Z,1422651143.674 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:52:24.199Z,1422651144.199 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:52:24.659Z,1422651144.659 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:52:25.085Z,1422651145.085 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:52:25.500Z,1422651145.500 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:52:25.933Z,1422651145.933 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:52:26.346Z,1422651146.346 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:52:26.761Z,1422651146.761 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:52:27.223Z,1422651147.223 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:52:27.660Z,1422651147.660 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:52:28.072Z,1422651148.072 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:52:28.509Z,1422651148.509 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:52:28.926Z,1422651148.926 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:52:29.349Z,1422651149.349 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:52:29.779Z,1422651149.779 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:52:30.228Z,1422651150.228 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:52:30.655Z,1422651150.655 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:52:31.077Z,1422651151.077 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:52:31.510Z,1422651151.510 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:52:31.930Z,1422651151.930 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:52:32.371Z,1422651152.371 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:52:32.792Z,1422651152.792 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:52:33.247Z,1422651153.247 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:52:33.665Z,1422651153.665 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:52:34.086Z,1422651154.086 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:52:34.514Z,1422651154.514 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:52:34.935Z,1422651154.935 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:52:35.368Z,1422651155.368 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:52:35.375Z,1422651155.375 [BPC1](ERROR): A bank expecting battery number:1 and read number: uart read:X
$S,01,5A8A,02,00,04,64%5B
$C1,01,FF,02,00,03,FF,04,00,05,00,06,00,07,00%72
$B11,0A,FFF9%4C
$B12,0A,FFFA%37
$B13,0A,0000%31
$B14,0A,0000%36
$B15,0A,0000%37
$B16,0A,0000%34
$B17,0A,0000%35
$B18,0A,FF7D%49
$S,01,557A,02,00,04,64%20
$C1,01,FF,02,00,03,FF,04,00,05,00,06,00,07,00%72
$B11,02,000A,01,02A8,03,0001,08,0B7D,09,411A,0A,FFF9,0B,FFF9%3F
$B11,0C,0001,0D,0064,0E,0060,0F,195C,10,1962,11,D95E,12,D95E%33
$B11,13,FFFF,14,0000,15,41A0,16,00E0,17,0001,18,1A90,19,3840%37
$B11,1A,0031,1B,458F,1C,0157%4D
$B12,02,000A,01,02A8,03,0001,08,0B82,09,4118,0A,FFFA,0B,FFFA%3C
$B12,0C,0001,0D,0064,0E,0062,0F,19CD,10,19D2,11,FFFF,12,FFFF%31
$B12,13,FFFF,14,0000,15,41A0,16,00E0,17,0001,18,1A90,19,3840%34
$B12,1A,0031,1B,458C,1C,00F1%3F
$B13,02,000A,01,02A8,03,0001,08,0B8A,09,40D6,0A,0000,0B,0000%34
$B13,0C,0001,0D,0064,0E,0060,0F,1958,10,1958,11,FFFF,12,FFFF%43
$B13,13,FFFF,14,0000,15,41A0,16,00E0,17,0001,18,1A90,19,3840%35
$B13,1A,0031,1B,458B,1C,00BF%4C
$B14,02,000A,01,02A8,03,0001,08,0B89,09,40E2,0A,0000,0B,0000%4E
$B14,0C,0001,0D,0064,0E,005F,0F,1937,10,1937,11,FFFF,12,FFFF%31
$B14,13,FFFF,14,0000,15,41A0,16,00E0,17,0001,18,1A90,19,3840%32
$B14,1A,0031,1B,458B,1C,0089%4E
$B15,02,000A,01,02A8,03,0001,08,0B89,09,40FE,0A,0000,0B,0000%3B
$B15,0C,0001,0D,0064,0E,0062,0F,19D2,10,19D2,11,FFFF,12,FFFF%47
$B15,13,FFFF,14,0000,15,41A0,16,00E0,17,0001,18,1A90,19,3840%33
$B15,1A,0031,1B,458C,1C,00C2%3E
$B16,02,000A,01,02A8,03,0001,08,0B7A,09,4132,0A,0000,0B,0000%4C
$B16,0C,0001,0D,0064,0E,0062,0F,19D0,10,19D0,11,FFFF,12,FFFF%44
$B16,13,FFFF,14,0000,15,41A0,16,00E0,17,0001,18,1A90,19,3840%30
$B16,1A,0031,1B,458C,1C,00CA%4E
$B17,02,000A,01,02A8,03,0001,08,0B8E,09,4130,0A,0000,0B,0000%44
$B17,0C,0001,0D,0064,0E,0062,0F,19CE,10,19CE,11,FFFF,12,FFFF%45
$B17,13,FFFF,14,0000,15,41A0,16,00E0,17,0001,18,1A90,19,3840%31
$B17,1A,0031,1B,458C,1C,011A%3C
$B18,02,000A,01,02A8,03,0001,08,0B8B,09,4070,0A,FF79,0B,FF7C%33
$B18,0C,0001,0D,0062,0E,005D,0F,188F,10,1923,11,0AEA,12,0B2A%33
$B18,13,FFFF,14,0000,15,41A0,16,00E0,17,0001,18,1A90,19,3840%3E
$B18,1A,0031,1B,458C,1C,00FD%40

2015-01-30T20:52:35.375Z,1422651155.375 [BPC1](FAULT): Failed to parse bank A battery data
2015-01-30T20:52:35.375Z,1422651155.375 [BPC1] Data Fault, FailCount= 1
2015-01-30T20:52:35.375Z,1422651155.375 [BPC1](ERROR): Data Fault
2015-01-30T20:52:35.447Z,1422651155.447 [CBIT](ERROR): Data Fault in component: BPC1
2015-01-30T20:52:35.792Z,1422651155.792 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:52:36.213Z,1422651156.213 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:52:36.678Z,1422651156.678 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:52:36.704Z,1422651156.704 [CBIT](INFO): Clearing failed state for component BPC1
2015-01-30T20:52:36.705Z,1422651156.705 [BPC1] No Fault, FailCount= 1
2015-01-30T20:52:37.094Z,1422651157.094 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:52:37.575Z,1422651157.575 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:52:38.032Z,1422651158.032 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:52:38.449Z,1422651158.449 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:52:38.865Z,1422651158.865 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:52:39.294Z,1422651159.294 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:52:39.762Z,1422651159.762 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:52:40.195Z,1422651160.195 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:52:40.616Z,1422651160.616 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:52:41.049Z,1422651161.049 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:52:41.474Z,1422651161.474 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:52:41.886Z,1422651161.886 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:52:42.307Z,1422651162.307 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:52:42.759Z,1422651162.759 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:52:43.184Z,1422651163.184 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:52:43.596Z,1422651163.596 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:52:44.025Z,1422651164.025 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:52:44.440Z,1422651164.440 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:52:44.862Z,1422651164.862 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:52:45.306Z,1422651165.306 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:52:45.768Z,1422651165.768 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:52:46.192Z,1422651166.192 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:52:46.605Z,1422651166.605 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:52:47.031Z,1422651167.031 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:52:47.031Z,1422651167.031 [DVL_micro](FAULT): DVL failed to acquire valid data within timeout.
2015-01-30T20:52:47.031Z,1422651167.031 [DVL_micro] Data Fault, FailCount= 1
2015-01-30T20:52:47.031Z,1422651167.031 [DVL_micro](ERROR): Data Fault
2015-01-30T20:52:47.061Z,1422651167.061 [CBIT](ERROR): Data Fault in component: DVL_micro
2015-01-30T20:52:47.529Z,1422651167.529 [DVL_micro](INFO): uninitialize:Powering down
2015-01-30T20:52:47.951Z,1422651167.951 [DVL_micro](FAULT): LCB fault:  Software Overcurrent.
2015-01-30T20:52:47.951Z,1422651167.951 [DVL_micro] Hardware Fault, FailCount= 1
2015-01-30T20:52:47.951Z,1422651167.951 [DVL_micro](ERROR): Hardware Fault
2015-01-30T20:52:47.954Z,1422651167.954 [NAL9602](INFO): SBD MO Status=2, MOMSN=47149, MT Status=2, MTMSN=0
2015-01-30T20:52:47.954Z,1422651167.954 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2015-01-30T20:52:48.416Z,1422651168.416 [CBIT](INFO): Clearing failed state for component DVL_micro
2015-01-30T20:52:48.416Z,1422651168.416 [DVL_micro] No Fault, FailCount= 1
2015-01-30T20:52:48.811Z,1422651168.810 [DVL_micro](INFO): Initializing
2015-01-30T20:52:48.819Z,1422651168.819 [BPC1](ERROR): B bank expecting battery number:1 and read number: uart read:X
$S,01,4FE2,02,00,04,64%53
$C1,01,FF,02,00,03,FF,04,00,05,00,06,00,07,00%72
$B11,0A,FFF9%4C
$B12,0A,FFFA%37
$B13,0A,0000%31
$B14,0A,0000%36
$B15,0A,0000%37
$B16,0A,0000%34
$B17,0A,0000%35
$B18,0A,FF5B%4D
$S,01,50F2,02,00,04,64%27
$C1,01,FF,02,00,03,FF,04,00,05,00,06,00,07,00%72
$B11,02,000A,01,02A8,03,0001,08,0B7D,09,411A,0A,FFF9,0B,FFF9%3F
$B11,0C,0001,0D,0064,0E,0060,0F,195C,10,1962,11,D95E,12,D95E%33
$B11,13,FFFF,14,0000,15,41A0,16,00E0,17,0001,18,1A90,19,3840%37
$B11,1A,0031,1B,458F,1C,0157%4D
$B12,02,000A,01,02A8,03,0001,08,0B82,09,4118,0A,FFFA,0B,FFFA%3C
$B12,0C,0001,0D,0064,0E,0062,0F,19CD,10,19D2,11,FFFF,12,FFFF%31
$B12,13,FFFF,14,0000,15,41A0,16,00E0,17,0001,18,1A90,19,3840%34
$B12,1A,0031,1B,458C,1C,00F1%3F
$B13,02,000A,01,02A8,03,0001,08,0B8A,09,40D5,0A,0000,0B,0000%37
$B13,0C,0001,0D,0064,0E,0060,0F,1958,10,1958,11,FFFF,12,FFFF%43
$B13,13,FFFF,14,0000,15,41A0,16,00E0,17,0001,18,1A90,19,3840%35
$B13,1A,0031,1B,458B,1C,00BF%4C
$B14,02,000A,01,02A8,03,0001,08,0B89,09,40E1,0A,0000,0B,0000%4D
$B14,0C,0001,0D,0064,0E,005F,0F,1937,10,1937,11,FFFF,12,FFFF%31
$B14,13,FFFF,14,0000,15,41A0,16,00E0,17,0001,18,1A90,19,3840%32
$B14,1A,0031,1B,458B,1C,0089%4E
$B15,02,000A,01,02A8,03,0001,08,0B89,09,40FE,0A,0000,0B,0000%3B
$B15,0C,0001,0D,0064,0E,0062,0F,19D2,10,19D2,11,FFFF,12,FFFF%47
$B15,13,FFFF,14,0000,15,41A0,16,00E0,17,0001,18,1A90,19,3840%33
$B15,1A,0031,1B,458C,1C,00C2%3E
$B16,02,000A,01,02A8,03,0001,08,0B7A,09,4132,0A,0000,0B,0000%4C
$B16,0C,0001,0D,0064,0E,0062,0F,19D0,10,19D0,11,FFFF,12,FFFF%44
$B16,13,FFFF,14,0000,15,41A0,16,00E0,17,0001,18,1A90,19,3840%30
$B16,1A,0031,1B,458C,1C,00CA%4E
$B17,02,000A,01,02A8,03,0001,08,0B8E,09,4130,0A,0000,0B,0000%44
$B17,0C,0001,0D,0064,0E,0062,0F,19CE,10,19CE,11,FFFF,12,FFFF%45
$B17,13,FFFF,14,0000,15,41A0,16,00E0,17,0001,18,1A90,19,3840%31
$B17,1A,0031,1B,458C,1C,011A%3C
$B18,02,000A,01,02A8,03,0001,08,0B8B,09,4070,0A,FF79,0B,FF7C%33
$B18,0C,0001,0D,0062,0E,005D,0F,188F,10,1923,11,0AEA,12,0B2A%33
$B18,13,FFFF,14,0000,15,41A0,16,00E0,17,0001,18,1A90,19,3840%3E
$B18,1A,0031,1B,458C,1C,00FD%40

2015-01-30T20:52:48.820Z,1422651168.820 [BPC1](FAULT): Failed to parse bank B battery data
2015-01-30T20:52:48.820Z,1422651168.820 [BPC1] Data Fault, FailCount= 2
2015-01-30T20:52:48.820Z,1422651168.820 [BPC1](ERROR): Data Fault
2015-01-30T20:52:48.893Z,1422651168.893 [CBIT](ERROR): Data Fault in component: BPC1
2015-01-30T20:52:50.124Z,1422651170.124 [CBIT](INFO): Clearing failed state for component BPC1
2015-01-30T20:52:50.124Z,1422651170.124 [BPC1] No Fault, FailCount= 2
2015-01-30T20:52:52.325Z,1422651172.325 [Startup:StartupSatComms:B](INFO): Timed out from 2015-01-30T20:51:51.9Z
2015-01-30T20:52:52.325Z,1422651172.325 [Startup:StartupSatComms:B] Stopped
2015-01-30T20:52:52.325Z,1422651172.325 [Startup:StartupSatComms](INFO): Completed Startup:StartupSatComms
2015-01-30T20:52:52.325Z,1422651172.325 [Startup:StartupSatComms] Stopped
2015-01-30T20:52:52.326Z,1422651172.326 [Startup:StartupSatComms](INFO): Aggregate::uninitialize Startup:StartupSatComms
2015-01-30T20:52:52.326Z,1422651172.326 [Startup](INFO): Completed Startup
2015-01-30T20:52:52.326Z,1422651172.326 [Startup] Stopped
2015-01-30T20:52:52.327Z,1422651172.327 [Startup](INFO): Aggregate::uninitialize Startup
2015-01-30T20:52:52.327Z,1422651172.327 [Startup:A.GoToSurface] Stopped
2015-01-30T20:52:52.327Z,1422651172.327 [Startup:A.GoToSurface](DEBUG): Uninitialize GoToSurfaceComponent.
2015-01-30T20:52:52.776Z,1422651172.776 [MissionManager](IMPORTANT): Started mission Default
2015-01-30T20:52:52.776Z,1422651172.776 [Default] Running Loop=1
2015-01-30T20:52:52.776Z,1422651172.776 [Default](INFO): Aggregate::initialize Default
2015-01-30T20:52:52.776Z,1422651172.776 [Default:B.GoToSurface] Running Loop=1
2015-01-30T20:52:52.776Z,1422651172.776 [Default:B.GoToSurface](DEBUG): Initialize GoToSurfaceComponent.
2015-01-30T20:52:52.777Z,1422651172.777 [Default:B.GoToSurface](DEBUG): No depth rate setting specified. Using default value of nan m/s.
2015-01-30T20:52:52.777Z,1422651172.777 [Default:B.GoToSurface](DEBUG): No pitch setting specified. Using default value of nan degrees.
2015-01-30T20:52:52.778Z,1422651172.778 [Default:B.GoToSurface](DEBUG): No speed setting specified. Using default value of 0.500000 m/s.
2015-01-30T20:52:52.778Z,1422651172.778 [Default:StartClock] Running Loop=1
2015-01-30T20:52:52.778Z,1422651172.778 [Default:StartClock](INFO): Aggregate::initialize Default:StartClock
2015-01-30T20:52:52.778Z,1422651172.778 [Default:StartClock:A] Running Loop=1
2015-01-30T20:52:52.779Z,1422651172.779 [Default:CheckIn] Running Loop=1
2015-01-30T20:52:52.779Z,1422651172.779 [Default:CheckIn](INFO): Aggregate::initialize Default:CheckIn
2015-01-30T20:52:52.779Z,1422651172.779 [Default:CheckIn:A.SetSpeed] Running Loop=1
2015-01-30T20:52:52.779Z,1422651172.779 [Default:CheckIn:A.SetSpeed](DEBUG): Initialize.
2015-01-30T20:52:52.779Z,1422651172.779 [Default:CheckIn:Read_GPS] Running Loop=1
2015-01-30T20:52:52.780Z,1422651172.780 [Default:CheckIn:Read_GPS](DEBUG): Initialize ReadDataComponent to sense latitude_fix
2015-01-30T20:52:52.782Z,1422651172.782 [Default:CheckIn:A.SetSpeed] Running Loop=1
2015-01-30T20:52:52.795Z,1422651172.795 [Default:StartClock:A] Stopped
2015-01-30T20:52:52.795Z,1422651172.795 [Default:StartClock](INFO): Completed Default:StartClock
2015-01-30T20:52:52.795Z,1422651172.795 [Default:StartClock] Stopped
2015-01-30T20:52:52.796Z,1422651172.796 [Default:StartClock](INFO): Aggregate::uninitialize Default:StartClock
2015-01-30T20:52:53.179Z,1422651173.179 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:52:53.197Z,1422651173.197 [Default:WaitAtTheSurface] Running Loop=1
2015-01-30T20:52:53.197Z,1422651173.197 [Default:WaitAtTheSurface](INFO): Aggregate::initialize Default:WaitAtTheSurface
2015-01-30T20:52:53.197Z,1422651173.197 [Default:WaitAtTheSurface:RunApplicationAtLowSpeed.SetSpeed] Running Loop=1
2015-01-30T20:52:53.197Z,1422651173.197 [Default:WaitAtTheSurface:RunApplicationAtLowSpeed.SetSpeed](DEBUG): Initialize.
2015-01-30T20:52:53.604Z,1422651173.604 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:52:53.620Z,1422651173.620 [Default:WaitAtTheSurface:RunApplicationAtLowSpeed.SetSpeed] Running Loop=1
2015-01-30T20:52:54.020Z,1422651174.020 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:52:54.438Z,1422651174.438 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:52:54.854Z,1422651174.854 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:52:55.314Z,1422651175.314 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:52:55.740Z,1422651175.740 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:52:56.156Z,1422651176.156 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:52:56.580Z,1422651176.580 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:52:57.005Z,1422651177.005 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:52:57.426Z,1422651177.426 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:52:57.854Z,1422651177.854 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:52:58.279Z,1422651178.279 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:52:58.728Z,1422651178.728 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:52:59.152Z,1422651179.152 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:52:59.569Z,1422651179.569 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:52:59.995Z,1422651179.995 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:53:00.418Z,1422651180.418 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:53:00.835Z,1422651180.835 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:53:01.266Z,1422651181.266 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:53:01.697Z,1422651181.697 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:53:02.137Z,1422651182.137 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:53:02.562Z,1422651182.562 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:53:02.974Z,1422651182.974 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:53:03.428Z,1422651183.428 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:53:03.900Z,1422651183.900 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:53:04.324Z,1422651184.324 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:53:04.761Z,1422651184.761 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:53:05.210Z,1422651185.210 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:53:05.670Z,1422651185.670 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:53:06.115Z,1422651186.115 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:53:06.528Z,1422651186.528 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:53:06.944Z,1422651186.944 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:53:07.365Z,1422651187.365 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:53:07.786Z,1422651187.786 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:53:08.230Z,1422651188.230 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:53:08.657Z,1422651188.657 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:53:09.080Z,1422651189.080 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:53:09.497Z,1422651189.497 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:53:09.930Z,1422651189.930 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:53:09.933Z,1422651189.933 [NAL9602](INFO): SBD MO Status=0, MOMSN=47149, MT Status=0, MTMSN=0
2015-01-30T20:53:09.933Z,1422651189.933 [NAL9602](INFO): No messages in MT queue
2015-01-30T20:53:10.363Z,1422651190.363 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:53:10.786Z,1422651190.786 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:53:11.264Z,1422651191.264 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:53:11.270Z,1422651191.270 [NAL9602](IMPORTANT): GPS fix at: 1422651189.00
2015-01-30T20:53:11.288Z,1422651191.288 [Default:CheckIn:Read_GPS] Stopped
2015-01-30T20:53:11.288Z,1422651191.288 [Default:CheckIn:Read_Iridium] Running Loop=1
2015-01-30T20:53:11.713Z,1422651191.713 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:53:11.780Z,1422651191.780 [Default:CheckIn:Read_Iridium](DEBUG): Initialize ReadDataComponent to sense platform_communications
2015-01-30T20:53:12.381Z,1422651192.381 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:53:12.806Z,1422651192.806 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:53:13.282Z,1422651193.282 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:53:13.712Z,1422651193.712 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:53:14.144Z,1422651194.144 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:53:14.661Z,1422651194.661 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:53:15.614Z,1422651195.614 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:53:16.159Z,1422651196.159 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:53:18.655Z,1422651198.655 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:53:19.148Z,1422651199.148 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:53:19.572Z,1422651199.572 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:53:20.025Z,1422651200.025 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:53:20.457Z,1422651200.457 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:53:20.918Z,1422651200.918 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:53:21.388Z,1422651201.388 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:53:21.816Z,1422651201.816 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:53:22.297Z,1422651202.297 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:53:22.717Z,1422651202.717 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:53:23.146Z,1422651203.146 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:53:23.577Z,1422651203.577 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:53:24.002Z,1422651204.002 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:53:24.428Z,1422651204.428 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:53:24.855Z,1422651204.855 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:53:25.308Z,1422651205.308 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:53:25.730Z,1422651205.730 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:53:26.154Z,1422651206.154 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:53:26.651Z,1422651206.651 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:53:27.104Z,1422651207.104 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:53:27.536Z,1422651207.536 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:53:27.954Z,1422651207.954 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:53:28.414Z,1422651208.414 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:53:28.831Z,1422651208.831 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:53:29.256Z,1422651209.256 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:53:29.696Z,1422651209.696 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:53:30.121Z,1422651210.121 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:53:30.533Z,1422651210.533 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:53:30.982Z,1422651210.982 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:53:31.451Z,1422651211.451 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:53:31.887Z,1422651211.887 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:53:32.304Z,1422651212.304 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:53:32.737Z,1422651212.737 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:53:33.189Z,1422651213.189 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:53:33.650Z,1422651213.650 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:53:34.079Z,1422651214.079 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:53:34.532Z,1422651214.532 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:53:34.988Z,1422651214.988 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:53:35.402Z,1422651215.402 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:53:35.845Z,1422651215.845 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:53:36.302Z,1422651216.302 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:53:36.715Z,1422651216.715 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:53:37.132Z,1422651217.132 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:53:37.589Z,1422651217.589 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:53:37.593Z,1422651217.593 [NAL9602](INFO): SBD MO Status=2, MOMSN=47150, MT Status=2, MTMSN=0
2015-01-30T20:53:37.593Z,1422651217.593 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2015-01-30T20:53:38.041Z,1422651218.041 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:53:38.458Z,1422651218.458 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:53:38.887Z,1422651218.887 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:53:39.323Z,1422651219.323 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:53:39.780Z,1422651219.780 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:53:40.204Z,1422651220.204 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:53:40.653Z,1422651220.653 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:53:41.066Z,1422651221.066 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:53:41.486Z,1422651221.486 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:53:41.915Z,1422651221.915 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:53:42.860Z,1422651222.860 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:53:43.409Z,1422651223.409 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:53:45.884Z,1422651225.884 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:53:49.149Z,1422651229.149 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:53:49.659Z,1422651229.659 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:53:50.080Z,1422651230.080 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:53:50.538Z,1422651230.538 [DataOverHttps](IMPORTANT): SBD MTMSN=20150130T205349
2015-01-30T20:53:50.541Z,1422651230.541 [DataOverHttps](INFO): setting available, lastComms_.elapsed()=0.004006
2015-01-30T20:53:50.565Z,1422651230.565 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:53:50.991Z,1422651230.991 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:53:51.458Z,1422651231.458 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:53:54.722Z,1422651234.722 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:53:55.179Z,1422651235.179 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20150130T203032/Courier0012.lzma
2015-01-30T20:53:55.182Z,1422651235.182 [DataOverHttps](INFO): Received command:ibit
2015-01-30T20:53:55.191Z,1422651235.191 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:53:55.195Z,1422651235.195 [CommandLine](IMPORTANT): got command ibit
2015-01-30T20:53:55.247Z,1422651235.247 [IBIT](IMPORTANT): Beginning Initiated BIT
2015-01-30T20:53:55.247Z,1422651235.247 [IBIT](IMPORTANT): Beginning control surface checks.
2015-01-30T20:53:55.249Z,1422651235.249 [CBIT](IMPORTANT): Beginning GF scan
2015-01-30T20:53:55.993Z,1422651235.993 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:53:55.996Z,1422651235.996 [NAL9602](INFO): SBD MO Status=1, MOMSN=47150, MT Status=0, MTMSN=0
2015-01-30T20:53:56.051Z,1422651236.051 [NAL9602](INFO): Sent 45 bytes from file Logs/20150130T203032/Courier0012.lzma
2015-01-30T20:53:56.052Z,1422651236.052 [NAL9602](INFO): Packets left to send: 0
2015-01-30T20:53:56.054Z,1422651236.054 [NAL9602](INFO): Stored copy of sent data in Logs/20150130T203032/Courier0012.lzma.parts/0000.sbd
2015-01-30T20:53:56.055Z,1422651236.055 [NAL9602](INFO): Completed sending Logs/20150130T203032/Courier0012.lzma
2015-01-30T20:53:56.518Z,1422651236.518 [DataOverHttps](FAULT): Server acknowledged file Logs/20150130T203032/Courier0012.lzma, notLogs/20150130T204932/Courier0000.lzma
2015-01-30T20:53:56.518Z,1422651236.518 [DataOverHttps](INFO): SBD MOMSN=1514067
2015-01-30T20:53:56.523Z,1422651236.523 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:53:56.939Z,1422651236.939 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:53:57.403Z,1422651237.403 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:53:57.407Z,1422651237.407 [NAL9602](IMPORTANT): GPS fix at: 1422651235.00
2015-01-30T20:54:00.839Z,1422651240.839 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:54:01.429Z,1422651241.429 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:54:01.866Z,1422651241.866 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:54:02.322Z,1422651242.322 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:54:02.755Z,1422651242.755 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:54:03.224Z,1422651243.224 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:54:03.228Z,1422651243.228 [NAL9602](IMPORTANT): GPS fix at: 1422651241.00
2015-01-30T20:54:06.725Z,1422651246.725 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:54:07.387Z,1422651247.387 [DataOverHttps](INFO): Sending 243 bytes from file Logs/20150130T204932/Courier0000.lzma
2015-01-30T20:54:07.398Z,1422651247.398 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:54:07.907Z,1422651247.907 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:54:08.337Z,1422651248.337 [DataOverHttps](INFO): Moved sent file to Logs/20150130T204932/Courier0000.lzma.bak
2015-01-30T20:54:08.338Z,1422651248.338 [DataOverHttps](INFO): SBD MOMSN=1514070
2015-01-30T20:54:08.348Z,1422651248.348 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:54:08.808Z,1422651248.808 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:54:09.245Z,1422651249.245 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:54:09.249Z,1422651249.249 [NAL9602](IMPORTANT): GPS fix at: 1422651247.00
2015-01-30T20:54:12.727Z,1422651252.727 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:54:13.248Z,1422651253.248 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:54:13.676Z,1422651253.676 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:54:14.101Z,1422651254.101 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:54:14.526Z,1422651254.526 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:54:14.980Z,1422651254.980 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:54:14.984Z,1422651254.984 [NAL9602](IMPORTANT): GPS fix at: 1422651253.00
2015-01-30T20:54:18.475Z,1422651258.475 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:54:18.980Z,1422651258.980 [DataOverHttps](INFO): Sending 63 bytes from file Logs/20150130T204932/Courier0004.lzma
2015-01-30T20:54:18.992Z,1422651258.992 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:54:19.421Z,1422651259.421 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:54:19.859Z,1422651259.859 [DataOverHttps](INFO): Moved sent file to Logs/20150130T204932/Courier0004.lzma.bak
2015-01-30T20:54:19.859Z,1422651259.859 [DataOverHttps](INFO): SBD MOMSN=1514075
2015-01-30T20:54:19.870Z,1422651259.870 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:54:20.334Z,1422651260.334 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:54:20.847Z,1422651260.847 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:54:24.274Z,1422651264.274 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:54:24.301Z,1422651264.301 [NAL9602](IMPORTANT): GPS fix at: 1422651259.00
2015-01-30T20:54:24.802Z,1422651264.802 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:54:24.968Z,1422651264.968 [CBIT](IMPORTANT): No ground fault detected
2015-01-30T20:54:25.322Z,1422651265.322 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:54:25.803Z,1422651265.803 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:54:26.296Z,1422651266.296 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:54:26.733Z,1422651266.733 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:54:30.113Z,1422651270.113 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:54:30.152Z,1422651270.152 [NAL9602](IMPORTANT): GPS fix at: 1422651265.00
2015-01-30T20:54:30.650Z,1422651270.650 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20150130T204932/Courier0008.lzma
2015-01-30T20:54:30.654Z,1422651270.654 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:54:31.127Z,1422651271.127 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:54:31.566Z,1422651271.566 [DataOverHttps](INFO): Moved sent file to Logs/20150130T204932/Courier0008.lzma.bak
2015-01-30T20:54:31.566Z,1422651271.566 [DataOverHttps](INFO): SBD MOMSN=1514080
2015-01-30T20:54:31.576Z,1422651271.576 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:54:32.053Z,1422651272.053 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:54:32.493Z,1422651272.493 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:54:35.836Z,1422651275.836 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:54:36.421Z,1422651276.421 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:54:36.427Z,1422651276.427 [NAL9602](IMPORTANT): GPS fix at: 1422651274.00
2015-01-30T20:54:37.053Z,1422651277.053 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:54:37.497Z,1422651277.497 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:54:37.942Z,1422651277.942 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:54:38.367Z,1422651278.367 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:54:41.678Z,1422651281.678 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:54:42.149Z,1422651282.149 [DataOverHttps](INFO): Sending 371 bytes from file Logs/20150130T203032/Express0013.lzma
2015-01-30T20:54:42.168Z,1422651282.168 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:54:42.173Z,1422651282.173 [NAL9602](IMPORTANT): GPS fix at: 1422651280.00
2015-01-30T20:54:42.637Z,1422651282.637 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:54:43.064Z,1422651283.064 [DataOverHttps](INFO): Moved sent file to Logs/20150130T203032/Express0013.lzma.bak
2015-01-30T20:54:43.064Z,1422651283.064 [DataOverHttps](INFO): SBD MOMSN=1514082
2015-01-30T20:54:43.076Z,1422651283.076 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:54:43.512Z,1422651283.512 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:54:43.936Z,1422651283.936 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:54:47.232Z,1422651287.232 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:54:47.721Z,1422651287.721 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:54:47.797Z,1422651287.797 [IBIT](IMPORTANT): Communications Status:
Fix Status: 1
Iridium Signal Strength: 3
Latitude: 36.804211 Longitude: -121.786407
2015-01-30T20:54:48.203Z,1422651288.203 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:54:48.207Z,1422651288.207 [NAL9602](IMPORTANT): GPS fix at: 1422651286.00
2015-01-30T20:54:48.281Z,1422651288.281 [IBIT](FAULT): Warning: Battery Data not active. Expected only when running primaries. Threshold checking not active.
2015-01-30T20:54:48.656Z,1422651288.656 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:54:48.714Z,1422651288.714 [IBIT](IMPORTANT): bitHumidityThreshold: 55.000000 %
2015-01-30T20:54:48.714Z,1422651288.714 [IBIT](IMPORTANT): bitPressureThreshold: 0.750000 psi
2015-01-30T20:54:48.714Z,1422651288.714 [IBIT](IMPORTANT): Pressure:8.079079 PSI
2015-01-30T20:54:48.715Z,1422651288.715 [IBIT](IMPORTANT): Humidity:4.901165 %
2015-01-30T20:54:49.095Z,1422651289.095 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:54:49.130Z,1422651289.130 [IBIT](IMPORTANT): surfaceThreshold: 0.500000 m
2015-01-30T20:54:49.130Z,1422651289.130 [IBIT](IMPORTANT): buoyancyNeutral: 350.000000 cc
2015-01-30T20:54:49.131Z,1422651289.131 [IBIT](IMPORTANT): massDefault: -0.300000 cm
2015-01-30T20:54:49.131Z,1422651289.131 [IBIT](IMPORTANT): stopDepth: 112.000000 m
2015-01-30T20:54:49.131Z,1422651289.131 [IBIT](IMPORTANT): abortDepth: 130.000000 m
2015-01-30T20:54:49.132Z,1422651289.132 [IBIT](IMPORTANT): IBIT PASSED
2015-01-30T20:54:49.557Z,1422651289.557 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:54:49.587Z,1422651289.587 [Default:UpdateAndReportMinutesSinceMissionStarted] Running Loop=1
2015-01-30T20:54:49.588Z,1422651289.588 [Default:UpdateAndReportMinutesSinceMissionStarted](INFO): Aggregate::initialize Default:UpdateAndReportMinutesSinceMissionStarted
2015-01-30T20:54:49.588Z,1422651289.588 [Default:UpdateAndReportMinutesSinceMissionStarted:A] Running Loop=1
2015-01-30T20:54:49.590Z,1422651289.590 [Default:UpdateAndReportMinutesSinceMissionStarted:A] Stopped
2015-01-30T20:54:49.590Z,1422651289.590 [Default:UpdateAndReportMinutesSinceMissionStarted:B] Running Loop=1
2015-01-30T20:54:49.590Z,1422651289.590 [Default:CheckIn:Read_Iridium] Stopped
2015-01-30T20:54:49.591Z,1422651289.591 [Default:CheckIn](INFO): Completed Default:CheckIn
2015-01-30T20:54:49.591Z,1422651289.591 [Default:CheckIn] Stopped
2015-01-30T20:54:49.591Z,1422651289.591 [Default:CheckIn](INFO): Aggregate::uninitialize Default:CheckIn
2015-01-30T20:54:49.591Z,1422651289.591 [Default:CheckIn:A.SetSpeed] Stopped
2015-01-30T20:54:49.591Z,1422651289.591 [Default:CheckIn:A.SetSpeed](DEBUG): Uninitialize.
2015-01-30T20:54:52.834Z,1422651292.834 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:54:52.904Z,1422651292.904 [Default:UpdateAndReportMinutesSinceMissionStarted:B](IMPORTANT): Default mission has been running for 1.946613 min 
2015-01-30T20:54:52.906Z,1422651292.906 [Default:UpdateAndReportMinutesSinceMissionStarted:B] Stopped
2015-01-30T20:54:52.906Z,1422651292.906 [Default:UpdateAndReportMinutesSinceMissionStarted](INFO): Completed Default:UpdateAndReportMinutesSinceMissionStarted
2015-01-30T20:54:52.907Z,1422651292.907 [Default:UpdateAndReportMinutesSinceMissionStarted] Stopped
2015-01-30T20:54:52.907Z,1422651292.907 [Default:UpdateAndReportMinutesSinceMissionStarted](INFO): Aggregate::uninitialize Default:UpdateAndReportMinutesSinceMissionStarted
2015-01-30T20:54:54.937Z,1422651294.937 [DataOverHttps](INFO): Sending 669 bytes from file Logs/20150130T204932/Express0001.lzma
2015-01-30T20:54:54.944Z,1422651294.944 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:54:59.948Z,1422651299.948 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:55:04.937Z,1422651304.937 [DataOverHttps](INFO): Moved sent file to Logs/20150130T204932/Express0001.lzma.bak
2015-01-30T20:55:04.937Z,1422651304.937 [DataOverHttps](INFO): SBD MOMSN=1514092
2015-01-30T20:55:04.948Z,1422651304.948 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:55:04.950Z,1422651304.950 [NAL9602](INFO): Powering down
2015-01-30T20:55:09.959Z,1422651309.959 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:55:14.953Z,1422651314.953 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:55:22.912Z,1422651322.912 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:55:24.943Z,1422651324.943 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:55:29.942Z,1422651329.942 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:55:34.946Z,1422651334.946 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:55:39.930Z,1422651339.930 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:55:44.942Z,1422651344.942 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:55:49.942Z,1422651349.942 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:55:54.941Z,1422651354.941 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:55:59.942Z,1422651359.942 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:55:59.942Z,1422651359.942 [DVL_micro](FAULT): DVL failed to acquire valid data within timeout.
2015-01-30T20:55:59.942Z,1422651359.942 [DVL_micro] Data Fault, FailCount= 1
2015-01-30T20:55:59.942Z,1422651359.942 [DVL_micro](ERROR): Data Fault
2015-01-30T20:55:59.994Z,1422651359.994 [CBIT](ERROR): Data Fault in component: DVL_micro
2015-01-30T20:56:05.011Z,1422651365.011 [DVL_micro](INFO): uninitialize:Powering down
2015-01-30T20:56:09.939Z,1422651369.939 [DVL_micro](FAULT): LCB fault:  Software Overcurrent.
2015-01-30T20:56:09.939Z,1422651369.939 [DVL_micro] Hardware Fault, FailCount= 1
2015-01-30T20:56:09.939Z,1422651369.939 [DVL_micro](ERROR): Hardware Fault
2015-01-30T20:56:14.997Z,1422651374.997 [CBIT](INFO): Clearing failed state for component DVL_micro
2015-01-30T20:56:14.997Z,1422651374.997 [DVL_micro] No Fault, FailCount= 1
2015-01-30T20:56:19.958Z,1422651379.958 [DVL_micro](INFO): Initializing
2015-01-30T20:56:27.935Z,1422651387.935 [BPC1](FAULT): Failed to receive battery data
2015-01-30T20:56:27.935Z,1422651387.935 [BPC1] Communications Fault, FailCount= 1
2015-01-30T20:56:27.935Z,1422651387.935 [BPC1](ERROR): Communications Fault
2015-01-30T20:56:27.956Z,1422651387.956 [CBIT](ERROR): Communications Fault in component: BPC1
2015-01-30T20:56:39.998Z,1422651399.998 [CBIT](INFO): Clearing failed state for component BPC1
2015-01-30T20:56:39.998Z,1422651399.998 [BPC1] No Fault, FailCount= 1
2015-01-30T20:56:49.943Z,1422651409.943 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:56:54.942Z,1422651414.942 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:56:59.942Z,1422651419.942 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:57:04.950Z,1422651424.950 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:57:09.942Z,1422651429.942 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:57:14.946Z,1422651434.946 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:57:19.945Z,1422651439.945 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:57:24.949Z,1422651444.949 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:57:32.789Z,1422651452.789 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:57:34.952Z,1422651454.952 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:57:34.965Z,1422651454.965 [BPC1](DEBUG): Received data from all battery sticks
2015-01-30T20:57:39.949Z,1422651459.949 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:57:44.940Z,1422651464.940 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:57:49.953Z,1422651469.953 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:57:54.948Z,1422651474.948 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:57:59.951Z,1422651479.951 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:58:04.943Z,1422651484.943 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:58:09.943Z,1422651489.943 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:58:14.951Z,1422651494.951 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:58:19.942Z,1422651499.942 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:58:24.950Z,1422651504.950 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:58:32.743Z,1422651512.743 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:58:32.774Z,1422651512.774 [BPC1](FAULT): Failed to receive battery data
2015-01-30T20:58:32.774Z,1422651512.774 [BPC1] Communications Fault, FailCount= 1
2015-01-30T20:58:32.775Z,1422651512.775 [BPC1](ERROR): Communications Fault
2015-01-30T20:58:32.833Z,1422651512.833 [CBIT](ERROR): Communications Fault in component: BPC1
2015-01-30T20:58:34.950Z,1422651514.950 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:58:39.942Z,1422651519.942 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:58:44.945Z,1422651524.945 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:58:44.982Z,1422651524.982 [CBIT](INFO): Clearing failed state for component BPC1
2015-01-30T20:58:44.982Z,1422651524.982 [BPC1] No Fault, FailCount= 1
2015-01-30T20:58:49.945Z,1422651529.945 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:58:54.960Z,1422651534.960 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:58:59.952Z,1422651539.952 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:58:59.990Z,1422651539.990 [Default:CheckIn] Running Loop=1
2015-01-30T20:58:59.990Z,1422651539.990 [Default:CheckIn](INFO): Aggregate::initialize Default:CheckIn
2015-01-30T20:58:59.990Z,1422651539.990 [Default:CheckIn:A.SetSpeed] Running Loop=1
2015-01-30T20:58:59.990Z,1422651539.990 [Default:CheckIn:A.SetSpeed](DEBUG): Initialize.
2015-01-30T20:58:59.990Z,1422651539.990 [Default:CheckIn:Read_GPS] Running Loop=1
2015-01-30T20:59:00.405Z,1422651540.405 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:59:00.407Z,1422651540.407 [NAL9602](INFO): Powering up
2015-01-30T20:59:00.845Z,1422651540.845 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:59:01.270Z,1422651541.270 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:59:01.731Z,1422651541.731 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:59:02.195Z,1422651542.195 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:59:02.648Z,1422651542.648 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:59:03.096Z,1422651543.096 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:59:03.562Z,1422651543.562 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:59:03.982Z,1422651543.982 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:59:04.399Z,1422651544.399 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:59:04.832Z,1422651544.832 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:59:05.292Z,1422651545.292 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:59:05.713Z,1422651545.713 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:59:06.136Z,1422651546.136 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:59:06.560Z,1422651546.560 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:59:07.011Z,1422651547.011 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:59:07.431Z,1422651547.431 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:59:07.844Z,1422651547.844 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:59:08.277Z,1422651548.277 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:59:08.733Z,1422651548.733 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:59:09.159Z,1422651549.159 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:59:09.579Z,1422651549.579 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:59:10.027Z,1422651550.027 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:59:10.492Z,1422651550.492 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:59:10.917Z,1422651550.917 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:59:11.374Z,1422651551.374 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:59:11.375Z,1422651551.375 [NAL9602](INFO): NAL9602 initialized
2015-01-30T20:59:11.802Z,1422651551.802 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:59:12.251Z,1422651552.251 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:59:12.692Z,1422651552.692 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:59:13.148Z,1422651553.148 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:59:13.585Z,1422651553.585 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:59:14.078Z,1422651554.078 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:59:14.495Z,1422651554.495 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:59:14.936Z,1422651554.936 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:59:15.340Z,1422651555.340 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:59:15.841Z,1422651555.841 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:59:16.257Z,1422651556.257 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:59:16.730Z,1422651556.730 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:59:17.163Z,1422651557.163 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:59:17.624Z,1422651557.624 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:59:18.044Z,1422651558.044 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:59:18.497Z,1422651558.497 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:59:18.953Z,1422651558.953 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:59:19.382Z,1422651559.382 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:59:19.799Z,1422651559.799 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:59:20.240Z,1422651560.240 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:59:20.708Z,1422651560.708 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:59:24.119Z,1422651564.119 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:59:24.141Z,1422651564.141 [NAL9602](INFO): SBD MO Status=0, MOMSN=47151, MT Status=0, MTMSN=0
2015-01-30T20:59:24.141Z,1422651564.141 [NAL9602](ERROR): Buffer populated but no message sent from NAL9602. Error code: 0
2015-01-30T20:59:24.554Z,1422651564.554 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:59:24.983Z,1422651564.983 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:59:25.424Z,1422651565.424 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:59:25.856Z,1422651565.856 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:59:25.913Z,1422651565.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T20:59:26.317Z,1422651566.317 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:59:26.343Z,1422651566.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T20:59:26.746Z,1422651566.746 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:59:27.187Z,1422651567.187 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:59:27.607Z,1422651567.607 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:59:28.072Z,1422651568.072 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:59:28.508Z,1422651568.508 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:59:28.997Z,1422651568.997 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:59:29.414Z,1422651569.414 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:59:29.862Z,1422651569.862 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:59:30.312Z,1422651570.312 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:59:30.772Z,1422651570.772 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:59:31.204Z,1422651571.204 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:59:31.673Z,1422651571.673 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:59:32.099Z,1422651572.099 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:59:32.570Z,1422651572.570 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:59:33.031Z,1422651573.031 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:59:33.476Z,1422651573.476 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:59:33.897Z,1422651573.897 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:59:33.920Z,1422651573.920 [NAL9602](INFO): SBD MO Status=0, MOMSN=47152, MT Status=0, MTMSN=0
2015-01-30T20:59:33.920Z,1422651573.920 [NAL9602](ERROR): Buffer populated but no message sent from NAL9602. Error code: 0
2015-01-30T20:59:34.345Z,1422651574.345 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:59:34.770Z,1422651574.770 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:59:35.229Z,1422651575.229 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:59:35.647Z,1422651575.647 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:59:36.101Z,1422651576.101 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:59:36.523Z,1422651576.523 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:59:36.557Z,1422651576.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T20:59:36.974Z,1422651576.974 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:59:36.988Z,1422651576.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T20:59:37.398Z,1422651577.398 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:59:37.841Z,1422651577.841 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:59:38.275Z,1422651578.275 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:59:38.756Z,1422651578.756 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:59:39.181Z,1422651579.181 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:59:39.625Z,1422651579.625 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:59:40.050Z,1422651580.050 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:59:40.519Z,1422651580.519 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:59:40.947Z,1422651580.947 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:59:41.420Z,1422651581.420 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:59:41.849Z,1422651581.849 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:59:41.880Z,1422651581.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T20:59:42.299Z,1422651582.299 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:59:42.312Z,1422651582.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T20:59:42.722Z,1422651582.722 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:59:43.191Z,1422651583.191 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:59:43.654Z,1422651583.654 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:59:44.092Z,1422651584.092 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:59:44.525Z,1422651584.525 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:59:45.014Z,1422651585.014 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:59:45.435Z,1422651585.435 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:59:45.469Z,1422651585.469 [NAL9602](INFO): SBD MO Status=0, MOMSN=47153, MT Status=0, MTMSN=0
2015-01-30T20:59:45.469Z,1422651585.469 [NAL9602](ERROR): Buffer populated but no message sent from NAL9602. Error code: 0
2015-01-30T20:59:45.927Z,1422651585.927 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:59:46.364Z,1422651586.364 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:59:46.829Z,1422651586.829 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:59:47.277Z,1422651587.277 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:59:47.325Z,1422651587.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T20:59:47.723Z,1422651587.723 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:59:47.737Z,1422651587.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T20:59:48.139Z,1422651588.139 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:59:48.603Z,1422651588.603 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:59:49.029Z,1422651589.029 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:59:49.465Z,1422651589.465 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:59:49.893Z,1422651589.893 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:59:49.959Z,1422651589.959 [Default:UpdateAndReportMinutesSinceMissionStarted] Running Loop=1
2015-01-30T20:59:49.960Z,1422651589.960 [Default:UpdateAndReportMinutesSinceMissionStarted](INFO): Aggregate::initialize Default:UpdateAndReportMinutesSinceMissionStarted
2015-01-30T20:59:49.960Z,1422651589.960 [Default:UpdateAndReportMinutesSinceMissionStarted:A] Running Loop=1
2015-01-30T20:59:49.960Z,1422651589.960 [Default:UpdateAndReportMinutesSinceMissionStarted:A] Stopped
2015-01-30T20:59:49.960Z,1422651589.960 [Default:UpdateAndReportMinutesSinceMissionStarted:B] Running Loop=1
2015-01-30T20:59:50.350Z,1422651590.350 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:59:50.385Z,1422651590.385 [Default:UpdateAndReportMinutesSinceMissionStarted:B](IMPORTANT): Default mission has been running for 6.952750 min 
2015-01-30T20:59:50.385Z,1422651590.385 [Default:UpdateAndReportMinutesSinceMissionStarted:B] Stopped
2015-01-30T20:59:50.385Z,1422651590.385 [Default:UpdateAndReportMinutesSinceMissionStarted](INFO): Completed Default:UpdateAndReportMinutesSinceMissionStarted
2015-01-30T20:59:50.385Z,1422651590.385 [Default:UpdateAndReportMinutesSinceMissionStarted] Stopped
2015-01-30T20:59:50.386Z,1422651590.386 [Default:UpdateAndReportMinutesSinceMissionStarted](INFO): Aggregate::uninitialize Default:UpdateAndReportMinutesSinceMissionStarted
2015-01-30T20:59:50.791Z,1422651590.791 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:59:50.850Z,1422651590.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T20:59:51.250Z,1422651591.250 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:59:51.263Z,1422651591.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T20:59:51.677Z,1422651591.677 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:59:52.117Z,1422651592.117 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:59:52.541Z,1422651592.541 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:59:52.983Z,1422651592.983 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:59:52.987Z,1422651592.987 [NAL9602](INFO): SBD MO Status=0, MOMSN=47154, MT Status=0, MTMSN=0
2015-01-30T20:59:52.988Z,1422651592.988 [NAL9602](ERROR): Buffer populated but no message sent from NAL9602. Error code: 0
2015-01-30T20:59:53.411Z,1422651593.411 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:59:53.864Z,1422651593.864 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:59:54.281Z,1422651594.281 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:59:54.753Z,1422651594.753 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:59:55.182Z,1422651595.182 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:59:55.626Z,1422651595.626 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:59:56.055Z,1422651596.055 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:59:56.492Z,1422651596.492 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:59:56.920Z,1422651596.920 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:59:57.402Z,1422651597.402 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:59:57.878Z,1422651597.878 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:59:58.342Z,1422651598.342 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:59:58.771Z,1422651598.771 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:59:59.279Z,1422651599.279 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T20:59:59.709Z,1422651599.709 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:00:00.145Z,1422651600.145 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:00:00.615Z,1422651600.615 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:00:01.068Z,1422651601.068 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:00:01.532Z,1422651601.532 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:00:01.577Z,1422651601.577 [NAL9602](INFO): SBD MO Status=0, MOMSN=47155, MT Status=0, MTMSN=0
2015-01-30T21:00:01.577Z,1422651601.577 [NAL9602](ERROR): Buffer populated but no message sent from NAL9602. Error code: 0
2015-01-30T21:00:02.027Z,1422651602.027 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:00:02.445Z,1422651602.445 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:00:02.890Z,1422651602.890 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:00:03.314Z,1422651603.314 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:00:03.743Z,1422651603.743 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:00:04.157Z,1422651604.157 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:00:04.588Z,1422651604.588 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:00:05.017Z,1422651605.017 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:00:05.466Z,1422651605.466 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:00:05.890Z,1422651605.890 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:00:06.363Z,1422651606.363 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:00:06.804Z,1422651606.804 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:00:07.260Z,1422651607.260 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:00:07.685Z,1422651607.685 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:00:07.716Z,1422651607.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:00:08.122Z,1422651608.122 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:00:08.143Z,1422651608.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:00:08.546Z,1422651608.546 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:00:09.019Z,1422651609.019 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:00:09.444Z,1422651609.444 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:00:09.885Z,1422651609.885 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:00:10.305Z,1422651610.305 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:00:10.787Z,1422651610.787 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:00:11.210Z,1422651611.210 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:00:11.663Z,1422651611.663 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:00:12.092Z,1422651612.092 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:00:12.124Z,1422651612.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:00:12.537Z,1422651612.537 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:00:12.541Z,1422651612.541 [NAL9602](INFO): SBD MO Status=0, MOMSN=47156, MT Status=0, MTMSN=0
2015-01-30T21:00:12.541Z,1422651612.541 [NAL9602](ERROR): Buffer populated but no message sent from NAL9602. Error code: 0
2015-01-30T21:00:12.596Z,1422651612.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:00:12.997Z,1422651612.997 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:00:13.434Z,1422651613.434 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:00:13.865Z,1422651613.865 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:00:14.351Z,1422651614.351 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:00:14.780Z,1422651614.780 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:00:15.281Z,1422651615.281 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:00:15.709Z,1422651615.709 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:00:16.202Z,1422651616.202 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:00:16.650Z,1422651616.650 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:00:17.083Z,1422651617.083 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:00:17.524Z,1422651617.524 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:00:17.973Z,1422651617.973 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:00:18.398Z,1422651618.398 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:00:18.846Z,1422651618.846 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:00:19.266Z,1422651619.266 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:00:19.712Z,1422651619.712 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:00:20.132Z,1422651620.132 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:00:20.174Z,1422651620.174 [NAL9602](INFO): SBD MO Status=0, MOMSN=47157, MT Status=0, MTMSN=0
2015-01-30T21:00:20.174Z,1422651620.174 [NAL9602](ERROR): Buffer populated but no message sent from NAL9602. Error code: 0
2015-01-30T21:00:20.593Z,1422651620.593 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:00:21.022Z,1422651621.022 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:00:24.280Z,1422651624.280 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:00:24.727Z,1422651624.727 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:00:25.184Z,1422651625.184 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:00:25.617Z,1422651625.617 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:00:26.058Z,1422651626.058 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:00:26.498Z,1422651626.498 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:00:26.955Z,1422651626.955 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:00:27.403Z,1422651627.403 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:00:27.876Z,1422651627.876 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:00:27.880Z,1422651627.880 [NAL9602](INFO): SBD MO Status=0, MOMSN=47158, MT Status=0, MTMSN=0
2015-01-30T21:00:27.880Z,1422651627.880 [NAL9602](ERROR): Buffer populated but no message sent from NAL9602. Error code: 0
2015-01-30T21:00:28.293Z,1422651628.293 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:00:28.762Z,1422651628.762 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:00:29.186Z,1422651629.186 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:00:29.643Z,1422651629.643 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:00:30.120Z,1422651630.120 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:00:30.544Z,1422651630.544 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:00:31.001Z,1422651631.001 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:00:31.502Z,1422651631.502 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:00:31.927Z,1422651631.927 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:00:32.359Z,1422651632.359 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:00:32.804Z,1422651632.804 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:00:33.256Z,1422651633.256 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:00:33.682Z,1422651633.682 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:00:34.118Z,1422651634.118 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:00:34.542Z,1422651634.542 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:00:34.988Z,1422651634.988 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:00:35.404Z,1422651635.404 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:00:35.853Z,1422651635.853 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:00:36.269Z,1422651636.269 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:00:36.722Z,1422651636.722 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:00:37.147Z,1422651637.147 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:00:37.177Z,1422651637.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:00:37.587Z,1422651637.587 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:00:37.610Z,1422651637.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:00:38.016Z,1422651638.016 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:00:38.485Z,1422651638.485 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:00:38.914Z,1422651638.914 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:00:39.350Z,1422651639.350 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:00:39.791Z,1422651639.791 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:00:40.244Z,1422651640.244 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:00:40.668Z,1422651640.668 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:00:40.700Z,1422651640.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:00:41.117Z,1422651641.117 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:00:41.131Z,1422651641.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:00:41.542Z,1422651641.542 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:00:42.027Z,1422651642.027 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:00:42.451Z,1422651642.451 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:00:42.924Z,1422651642.924 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:00:43.341Z,1422651643.341 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:00:43.368Z,1422651643.368 [NAL9602](INFO): SBD MO Status=0, MOMSN=47159, MT Status=0, MTMSN=0
2015-01-30T21:00:43.368Z,1422651643.368 [NAL9602](ERROR): Buffer populated but no message sent from NAL9602. Error code: 0
2015-01-30T21:00:43.817Z,1422651643.817 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:00:44.250Z,1422651644.250 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:00:44.718Z,1422651644.718 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:00:45.144Z,1422651645.144 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:00:45.624Z,1422651645.624 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:00:46.072Z,1422651646.072 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:00:46.554Z,1422651646.554 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:00:46.974Z,1422651646.974 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:00:47.439Z,1422651647.439 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:00:47.871Z,1422651647.871 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:00:47.938Z,1422651647.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:00:48.348Z,1422651648.348 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:00:48.370Z,1422651648.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:00:48.777Z,1422651648.777 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:00:49.233Z,1422651649.233 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:00:49.660Z,1422651649.660 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:00:49.692Z,1422651649.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:00:50.103Z,1422651650.103 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:00:50.126Z,1422651650.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:00:50.531Z,1422651650.531 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:00:50.992Z,1422651650.992 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:00:51.403Z,1422651651.403 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:00:51.446Z,1422651651.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:00:51.857Z,1422651651.857 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:00:51.881Z,1422651651.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:00:52.282Z,1422651652.282 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:00:52.731Z,1422651652.731 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:00:53.152Z,1422651653.152 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:00:53.620Z,1422651653.620 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:00:54.045Z,1422651654.045 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:00:54.490Z,1422651654.490 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:00:54.907Z,1422651654.907 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:00:55.361Z,1422651655.361 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:00:55.775Z,1422651655.775 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:00:56.228Z,1422651656.228 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:00:56.653Z,1422651656.653 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:00:56.728Z,1422651656.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:00:57.117Z,1422651657.117 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:00:57.132Z,1422651657.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:00:57.534Z,1422651657.534 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:00:57.983Z,1422651657.983 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:00:58.436Z,1422651658.436 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:00:58.904Z,1422651658.904 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:00:59.354Z,1422651659.354 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:00:59.404Z,1422651659.404 [NAL9602](INFO): SBD MO Status=2, MOMSN=47160, MT Status=2, MTMSN=0
2015-01-30T21:00:59.405Z,1422651659.405 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2015-01-30T21:00:59.858Z,1422651659.858 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:01:00.282Z,1422651660.282 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:01:00.763Z,1422651660.763 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:01:01.228Z,1422651661.228 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:01:01.259Z,1422651661.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:01:01.677Z,1422651661.677 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:01:01.691Z,1422651661.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:01:02.097Z,1422651662.097 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:01:02.594Z,1422651662.594 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:01:03.035Z,1422651663.035 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:01:03.067Z,1422651663.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:01:03.484Z,1422651663.484 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:01:03.497Z,1422651663.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:01:03.908Z,1422651663.908 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:01:04.397Z,1422651664.397 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:01:04.830Z,1422651664.830 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:01:05.270Z,1422651665.270 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:01:05.699Z,1422651665.699 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:01:06.147Z,1422651666.147 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:01:06.572Z,1422651666.572 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:01:07.013Z,1422651667.013 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:01:07.429Z,1422651667.429 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:01:07.863Z,1422651667.863 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:01:08.292Z,1422651668.292 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:01:08.732Z,1422651668.732 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:01:09.160Z,1422651669.160 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:01:09.609Z,1422651669.609 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:01:10.033Z,1422651670.033 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:01:10.487Z,1422651670.487 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:01:10.911Z,1422651670.911 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:01:10.942Z,1422651670.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:01:11.362Z,1422651671.362 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:01:11.376Z,1422651671.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:01:11.781Z,1422651671.781 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:01:12.237Z,1422651672.237 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:01:12.666Z,1422651672.666 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:01:13.111Z,1422651673.111 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:01:13.555Z,1422651673.555 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:01:14.017Z,1422651674.017 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:01:14.433Z,1422651674.433 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:01:14.881Z,1422651674.881 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:01:15.294Z,1422651675.294 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:01:15.787Z,1422651675.787 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:01:16.203Z,1422651676.203 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:01:16.226Z,1422651676.226 [NAL9602](INFO): SBD MO Status=2, MOMSN=47160, MT Status=2, MTMSN=0
2015-01-30T21:01:16.227Z,1422651676.227 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2015-01-30T21:01:16.272Z,1422651676.272 [BPC1](FAULT): Failed to receive battery data
2015-01-30T21:01:16.272Z,1422651676.272 [BPC1] Communications Fault, FailCount= 1
2015-01-30T21:01:16.272Z,1422651676.272 [BPC1](ERROR): Communications Fault
2015-01-30T21:01:16.315Z,1422651676.315 [CBIT](ERROR): Communications Fault in component: BPC1
2015-01-30T21:01:16.684Z,1422651676.684 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:01:17.129Z,1422651677.129 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:01:17.568Z,1422651677.568 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:01:17.609Z,1422651677.609 [CBIT](INFO): Clearing failed state for component BPC1
2015-01-30T21:01:17.609Z,1422651677.609 [BPC1] No Fault, FailCount= 1
2015-01-30T21:01:17.986Z,1422651677.986 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:01:18.495Z,1422651678.495 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:01:18.952Z,1422651678.952 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:01:19.440Z,1422651679.440 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:01:19.885Z,1422651679.885 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:01:19.927Z,1422651679.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:01:20.334Z,1422651680.334 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:01:20.347Z,1422651680.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:01:20.769Z,1422651680.769 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:01:21.260Z,1422651681.260 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:01:24.482Z,1422651684.482 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:01:24.527Z,1422651684.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:01:24.949Z,1422651684.949 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:01:24.972Z,1422651684.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:01:25.378Z,1422651685.378 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:01:25.859Z,1422651685.859 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:01:26.279Z,1422651686.279 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:01:26.756Z,1422651686.756 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:01:27.172Z,1422651687.172 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:01:27.625Z,1422651687.625 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:01:28.050Z,1422651688.050 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:01:28.089Z,1422651688.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:01:28.502Z,1422651688.502 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:01:28.526Z,1422651688.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:01:28.931Z,1422651688.931 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:01:29.400Z,1422651689.400 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:01:29.828Z,1422651689.828 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:01:30.269Z,1422651690.269 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:01:30.686Z,1422651690.686 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:01:31.171Z,1422651691.171 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:01:31.595Z,1422651691.595 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:01:32.056Z,1422651692.056 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:01:32.480Z,1422651692.480 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:01:32.896Z,1422651692.896 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:01:33.322Z,1422651693.322 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:01:33.352Z,1422651693.352 [NAL9602](INFO): SBD MO Status=2, MOMSN=47160, MT Status=2, MTMSN=0
2015-01-30T21:01:33.352Z,1422651693.352 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2015-01-30T21:01:33.788Z,1422651693.788 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:01:33.796Z,1422651693.796 [BPC1](FAULT): Failed to receive battery data
2015-01-30T21:01:33.796Z,1422651693.796 [BPC1] Communications Fault, FailCount= 2
2015-01-30T21:01:33.797Z,1422651693.797 [BPC1](ERROR): Communications Fault
2015-01-30T21:01:33.819Z,1422651693.819 [CBIT](ERROR): Communications Fault in component: BPC1
2015-01-30T21:01:34.215Z,1422651694.215 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:01:34.668Z,1422651694.668 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:01:35.092Z,1422651695.092 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:01:35.168Z,1422651695.168 [CBIT](INFO): Clearing failed state for component BPC1
2015-01-30T21:01:35.168Z,1422651695.168 [BPC1] No Fault, FailCount= 2
2015-01-30T21:01:35.548Z,1422651695.548 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:01:36.030Z,1422651696.030 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:01:36.515Z,1422651696.515 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:01:36.961Z,1422651696.961 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:01:37.416Z,1422651697.416 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:01:37.833Z,1422651697.833 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:01:38.310Z,1422651698.310 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:01:38.738Z,1422651698.738 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:01:38.780Z,1422651698.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:01:39.169Z,1422651699.169 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:01:39.183Z,1422651699.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:01:39.587Z,1422651699.587 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:01:40.048Z,1422651700.048 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:01:40.480Z,1422651700.480 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:01:40.930Z,1422651700.930 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:01:41.370Z,1422651701.370 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:01:41.802Z,1422651701.802 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:01:42.239Z,1422651702.239 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:01:42.688Z,1422651702.688 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:01:43.109Z,1422651703.109 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:01:43.566Z,1422651703.566 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:01:43.986Z,1422651703.986 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:01:44.455Z,1422651704.455 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:01:44.891Z,1422651704.891 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:01:44.945Z,1422651704.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:01:45.348Z,1422651705.348 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:01:45.376Z,1422651705.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:01:45.777Z,1422651705.777 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:01:46.222Z,1422651706.222 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:01:46.646Z,1422651706.646 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:01:47.095Z,1422651707.095 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:01:47.521Z,1422651707.521 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:01:47.982Z,1422651707.982 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:01:48.484Z,1422651708.484 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:01:48.938Z,1422651708.938 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:01:49.403Z,1422651709.403 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:01:49.846Z,1422651709.846 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:01:50.333Z,1422651710.333 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:01:50.814Z,1422651710.814 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:01:51.250Z,1422651711.250 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:01:51.727Z,1422651711.727 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:01:52.143Z,1422651712.143 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:01:52.612Z,1422651712.612 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:01:53.036Z,1422651713.036 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:01:53.068Z,1422651713.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:01:53.481Z,1422651713.481 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:01:53.495Z,1422651713.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:01:53.898Z,1422651713.898 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:01:54.354Z,1422651714.354 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:01:54.776Z,1422651714.776 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:01:55.224Z,1422651715.224 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:01:55.656Z,1422651715.656 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:01:55.722Z,1422651715.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:01:56.112Z,1422651716.112 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:01:56.126Z,1422651716.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:01:56.526Z,1422651716.526 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:01:56.986Z,1422651716.986 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:01:57.415Z,1422651717.415 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:01:57.470Z,1422651717.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:01:57.868Z,1422651717.868 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:01:57.881Z,1422651717.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:01:58.297Z,1422651718.297 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:01:58.769Z,1422651718.769 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:01:59.190Z,1422651719.190 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:01:59.229Z,1422651719.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:01:59.622Z,1422651719.622 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:01:59.637Z,1422651719.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:02:00.036Z,1422651720.036 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:02:00.492Z,1422651720.492 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:02:00.920Z,1422651720.920 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:02:00.987Z,1422651720.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:02:01.389Z,1422651721.389 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:02:01.416Z,1422651721.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:02:01.818Z,1422651721.818 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:02:02.266Z,1422651722.266 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:02:02.687Z,1422651722.687 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:02:02.790Z,1422651722.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:02:03.196Z,1422651723.196 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:02:03.209Z,1422651723.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:02:03.628Z,1422651723.628 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:02:04.097Z,1422651724.097 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:02:04.530Z,1422651724.530 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:02:04.661Z,1422651724.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:02:05.071Z,1422651725.071 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:02:05.133Z,1422651725.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:02:05.528Z,1422651725.528 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:02:05.988Z,1422651725.988 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:02:06.414Z,1422651726.414 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:02:06.446Z,1422651726.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:02:06.854Z,1422651726.854 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:02:06.877Z,1422651726.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:02:07.294Z,1422651727.294 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:02:07.735Z,1422651727.735 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:02:08.164Z,1422651728.164 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:02:08.204Z,1422651728.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:02:08.617Z,1422651728.617 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:02:08.651Z,1422651728.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:02:09.097Z,1422651729.097 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:02:09.557Z,1422651729.557 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:02:09.990Z,1422651729.990 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:02:10.022Z,1422651730.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:02:10.427Z,1422651730.427 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:02:10.451Z,1422651730.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:02:10.847Z,1422651730.847 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:02:11.293Z,1422651731.293 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:02:11.709Z,1422651731.709 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:02:11.772Z,1422651731.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:02:12.146Z,1422651732.146 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:02:12.163Z,1422651732.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:02:12.575Z,1422651732.575 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:02:13.027Z,1422651733.027 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:02:13.452Z,1422651733.452 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:02:13.535Z,1422651733.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:02:13.937Z,1422651733.937 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:02:13.958Z,1422651733.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:02:14.361Z,1422651734.361 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:02:14.425Z,1422651734.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 2 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:02:14.826Z,1422651734.826 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:02:14.840Z,1422651734.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 3 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:02:15.255Z,1422651735.255 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:02:15.286Z,1422651735.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 4 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:02:15.712Z,1422651735.712 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:02:15.725Z,1422651735.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 5 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:02:16.128Z,1422651736.128 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:02:16.573Z,1422651736.573 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:02:16.990Z,1422651736.990 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:02:17.482Z,1422651737.482 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:02:17.979Z,1422651737.979 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:02:18.436Z,1422651738.436 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:02:18.884Z,1422651738.884 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:02:19.373Z,1422651739.373 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:02:19.798Z,1422651739.798 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:02:20.282Z,1422651740.282 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:02:20.735Z,1422651740.735 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:02:21.224Z,1422651741.224 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:02:21.649Z,1422651741.649 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:02:22.118Z,1422651742.118 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:02:22.538Z,1422651742.538 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:02:23.031Z,1422651743.031 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:02:23.443Z,1422651743.443 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:02:23.924Z,1422651743.924 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:02:24.353Z,1422651744.353 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:02:24.797Z,1422651744.797 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:02:25.223Z,1422651745.223 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:02:25.683Z,1422651745.683 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:02:26.099Z,1422651746.099 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:02:26.562Z,1422651746.562 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:02:26.989Z,1422651746.989 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:02:27.036Z,1422651747.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:02:27.435Z,1422651747.435 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:02:27.458Z,1422651747.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:02:27.850Z,1422651747.850 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:02:27.914Z,1422651747.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 2 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:02:28.311Z,1422651748.311 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:02:28.346Z,1422651748.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 3 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:02:28.751Z,1422651748.751 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:02:28.826Z,1422651748.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 4 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:02:29.221Z,1422651749.221 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:02:29.250Z,1422651749.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 5 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:02:29.645Z,1422651749.645 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:02:30.098Z,1422651750.098 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:02:30.519Z,1422651750.519 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:02:30.578Z,1422651750.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:02:30.975Z,1422651750.975 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:02:30.989Z,1422651750.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:02:31.408Z,1422651751.408 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:02:31.442Z,1422651751.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 2 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:02:31.861Z,1422651751.861 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:02:31.875Z,1422651751.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 3 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:02:32.285Z,1422651752.285 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:02:32.388Z,1422651752.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 4 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:02:32.794Z,1422651752.794 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:02:32.837Z,1422651752.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 5 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:02:33.247Z,1422651753.247 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:02:33.739Z,1422651753.739 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:02:34.180Z,1422651754.180 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:02:34.268Z,1422651754.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:02:34.677Z,1422651754.677 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:02:34.736Z,1422651754.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:02:35.141Z,1422651755.141 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:02:35.606Z,1422651755.606 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:02:36.039Z,1422651756.039 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:02:36.504Z,1422651756.504 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:02:36.935Z,1422651756.935 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:02:37.015Z,1422651757.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:02:37.421Z,1422651757.421 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:02:37.445Z,1422651757.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:02:37.854Z,1422651757.854 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:02:38.335Z,1422651758.335 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:02:38.763Z,1422651758.763 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:02:38.842Z,1422651758.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:02:39.241Z,1422651759.241 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:02:39.254Z,1422651759.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:02:39.663Z,1422651759.663 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:02:39.711Z,1422651759.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 2 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:02:40.113Z,1422651760.113 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:02:40.127Z,1422651760.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 3 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:02:40.546Z,1422651760.546 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:02:41.044Z,1422651761.044 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:02:41.467Z,1422651761.467 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:02:41.533Z,1422651761.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:02:41.944Z,1422651761.944 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:02:41.968Z,1422651761.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:02:42.405Z,1422651762.405 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:02:42.850Z,1422651762.850 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:02:43.290Z,1422651763.290 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:02:43.333Z,1422651763.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:02:43.743Z,1422651763.743 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:02:43.782Z,1422651763.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:02:44.192Z,1422651764.192 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:02:44.652Z,1422651764.652 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:02:45.077Z,1422651765.077 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:02:45.134Z,1422651765.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:02:45.534Z,1422651765.534 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:02:45.547Z,1422651765.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:02:45.967Z,1422651765.967 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:02:45.999Z,1422651765.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 2 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:02:46.411Z,1422651766.411 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:02:46.462Z,1422651766.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 3 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:02:46.880Z,1422651766.880 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:02:47.358Z,1422651767.358 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:02:47.777Z,1422651767.777 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:02:48.282Z,1422651768.282 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:02:48.707Z,1422651768.707 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:02:48.802Z,1422651768.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:02:49.207Z,1422651769.207 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:02:49.259Z,1422651769.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:02:49.672Z,1422651769.672 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:02:50.129Z,1422651770.129 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:02:50.554Z,1422651770.554 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:02:50.604Z,1422651770.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:02:51.010Z,1422651771.010 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:02:51.023Z,1422651771.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:02:51.423Z,1422651771.423 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2015-01-30T21:02:51.431Z,1422651771.431 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:02:51.866Z,1422651771.866 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:02:52.292Z,1422651772.292 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:02:52.333Z,1422651772.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:02:52.741Z,1422651772.741 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:02:52.766Z,1422651772.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:02:53.168Z,1422651773.168 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:02:53.630Z,1422651773.630 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:02:54.111Z,1422651774.111 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:02:54.142Z,1422651774.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:02:54.564Z,1422651774.564 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:02:54.577Z,1422651774.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:02:54.996Z,1422651774.996 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:02:55.430Z,1422651775.430 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:02:55.850Z,1422651775.850 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:02:55.890Z,1422651775.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:02:56.315Z,1422651776.315 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:02:56.329Z,1422651776.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:02:56.731Z,1422651776.731 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:02:57.224Z,1422651777.224 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:02:57.653Z,1422651777.653 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:02:57.692Z,1422651777.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:02:58.097Z,1422651778.097 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:02:58.137Z,1422651778.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:02:58.550Z,1422651778.550 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:02:59.003Z,1422651779.003 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:02:59.451Z,1422651779.451 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:02:59.503Z,1422651779.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:02:59.929Z,1422651779.929 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:02:59.943Z,1422651779.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:03:00.357Z,1422651780.357 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:03:00.805Z,1422651780.805 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:03:01.227Z,1422651781.227 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:03:01.309Z,1422651781.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:03:01.703Z,1422651781.703 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:03:01.762Z,1422651781.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:03:02.151Z,1422651782.151 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:03:02.607Z,1422651782.607 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:03:03.041Z,1422651783.041 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:03:03.115Z,1422651783.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:03:03.521Z,1422651783.521 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:03:03.555Z,1422651783.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:03:03.954Z,1422651783.954 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:03:04.435Z,1422651784.435 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:03:04.912Z,1422651784.912 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:03:04.953Z,1422651784.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:03:05.358Z,1422651785.358 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:03:05.372Z,1422651785.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:03:05.789Z,1422651785.789 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:03:05.821Z,1422651785.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 2 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:03:06.238Z,1422651786.238 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:03:06.252Z,1422651786.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 3 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:03:06.653Z,1422651786.653 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:03:07.115Z,1422651787.115 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:03:07.540Z,1422651787.540 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:03:07.572Z,1422651787.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:03:07.960Z,1422651787.960 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:03:07.974Z,1422651787.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:03:08.391Z,1422651788.391 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:03:08.834Z,1422651788.834 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:03:09.275Z,1422651789.275 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:03:09.319Z,1422651789.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:03:09.752Z,1422651789.752 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:03:09.807Z,1422651789.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:03:10.216Z,1422651790.216 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:03:10.689Z,1422651790.689 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:03:11.117Z,1422651791.117 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:03:11.178Z,1422651791.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:03:11.566Z,1422651791.566 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:03:11.580Z,1422651791.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:03:11.991Z,1422651791.991 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:03:12.465Z,1422651792.465 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:03:12.896Z,1422651792.896 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:03:12.935Z,1422651792.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:03:13.353Z,1422651793.353 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:03:13.367Z,1422651793.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:03:13.773Z,1422651793.773 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:03:13.860Z,1422651793.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 2 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:03:14.262Z,1422651794.262 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:03:14.276Z,1422651794.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 3 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:03:14.703Z,1422651794.703 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:03:15.184Z,1422651795.184 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:03:15.620Z,1422651795.620 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:03:15.674Z,1422651795.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:03:16.094Z,1422651796.094 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:03:16.108Z,1422651796.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:03:16.518Z,1422651796.518 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:03:16.661Z,1422651796.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 2 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:03:17.063Z,1422651797.063 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:03:17.076Z,1422651797.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 3 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:03:17.487Z,1422651797.487 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:03:17.586Z,1422651797.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 4 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:03:17.984Z,1422651797.984 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:03:17.997Z,1422651797.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 5 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:03:18.409Z,1422651798.409 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:03:18.849Z,1422651798.849 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:03:19.286Z,1422651799.286 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:03:19.751Z,1422651799.751 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:03:20.183Z,1422651800.183 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:03:20.588Z,1422651800.588 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:03:21.013Z,1422651801.013 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:03:21.453Z,1422651801.453 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:03:21.883Z,1422651801.883 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:03:22.299Z,1422651802.299 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:03:22.720Z,1422651802.720 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:03:23.176Z,1422651803.176 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:03:23.592Z,1422651803.592 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:03:24.006Z,1422651804.006 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:03:24.447Z,1422651804.447 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:03:24.890Z,1422651804.890 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:03:25.327Z,1422651805.327 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:03:25.744Z,1422651805.744 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:03:26.222Z,1422651806.222 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:03:26.658Z,1422651806.658 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:03:27.090Z,1422651807.090 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:03:27.507Z,1422651807.507 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:03:27.935Z,1422651807.935 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:03:28.388Z,1422651808.388 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:03:28.813Z,1422651808.813 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:03:29.234Z,1422651809.234 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:03:29.698Z,1422651809.698 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:03:30.139Z,1422651810.139 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:03:30.588Z,1422651810.588 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:03:31.020Z,1422651811.020 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:03:31.429Z,1422651811.429 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:03:31.950Z,1422651811.950 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:03:32.370Z,1422651812.370 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:03:32.827Z,1422651812.827 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:03:33.252Z,1422651813.252 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:03:33.740Z,1422651813.740 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:03:34.206Z,1422651814.206 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:03:34.627Z,1422651814.627 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:03:35.082Z,1422651815.082 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:03:35.535Z,1422651815.535 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:03:35.972Z,1422651815.972 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:03:36.401Z,1422651816.401 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:03:36.821Z,1422651816.821 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:03:37.262Z,1422651817.262 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:03:37.687Z,1422651817.687 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:03:38.098Z,1422651818.098 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:03:38.532Z,1422651818.532 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:03:38.996Z,1422651818.996 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:03:39.416Z,1422651819.416 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:03:39.830Z,1422651819.830 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:03:40.270Z,1422651820.270 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:03:40.708Z,1422651820.708 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:03:41.156Z,1422651821.156 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:03:41.572Z,1422651821.572 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:03:42.001Z,1422651822.001 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:03:42.458Z,1422651822.458 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:03:42.887Z,1422651822.887 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:03:43.316Z,1422651823.316 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:03:43.745Z,1422651823.745 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:03:44.192Z,1422651824.192 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:03:44.621Z,1422651824.621 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:03:45.046Z,1422651825.046 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:03:45.499Z,1422651825.499 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:03:46.024Z,1422651826.024 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:03:46.469Z,1422651826.469 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:03:46.929Z,1422651826.929 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:03:47.374Z,1422651827.374 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:03:47.846Z,1422651827.846 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:03:48.320Z,1422651828.320 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:03:48.326Z,1422651828.326 [BPC1](DEBUG): Received data from all battery sticks
2015-01-30T21:03:48.740Z,1422651828.740 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:03:49.152Z,1422651829.152 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:03:49.597Z,1422651829.597 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:03:50.018Z,1422651830.018 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:03:50.450Z,1422651830.450 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:03:50.879Z,1422651830.879 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:03:51.358Z,1422651831.358 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:03:51.775Z,1422651831.775 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2015-01-30T21:03:51.785Z,1422651831.785 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:03:52.221Z,1422651832.221 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:03:52.645Z,1422651832.645 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:03:53.102Z,1422651833.102 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:03:53.527Z,1422651833.527 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:03:53.935Z,1422651833.935 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:03:54.348Z,1422651834.348 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:03:54.809Z,1422651834.809 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:03:55.234Z,1422651835.234 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:03:55.662Z,1422651835.662 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:03:56.115Z,1422651836.115 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:03:56.552Z,1422651836.552 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:03:56.607Z,1422651836.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:03:57.008Z,1422651837.008 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:03:57.022Z,1422651837.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:03:57.425Z,1422651837.425 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:03:57.466Z,1422651837.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 2 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:03:57.882Z,1422651837.882 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:03:57.913Z,1422651837.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 3 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:03:58.315Z,1422651838.315 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:03:58.375Z,1422651838.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 4 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:03:58.783Z,1422651838.783 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:03:58.796Z,1422651838.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 5 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:03:59.204Z,1422651839.204 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:03:59.649Z,1422651839.649 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:04:00.101Z,1422651840.101 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:04:00.204Z,1422651840.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:04:00.210Z,1422651840.210 [Default:CheckIn:Read_GPS](INFO): Timed out from 2015-01-30T20:58:59.0Z
2015-01-30T21:04:00.210Z,1422651840.210 [Default:CheckIn:Read_GPS] Stopped
2015-01-30T21:04:00.211Z,1422651840.211 [Default:CheckIn:Read_Iridium] Running Loop=1
2015-01-30T21:04:00.590Z,1422651840.590 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:04:00.624Z,1422651840.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:04:01.255Z,1422651841.255 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:04:01.342Z,1422651841.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 2 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:04:01.764Z,1422651841.764 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:04:01.806Z,1422651841.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 3 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:04:02.208Z,1422651842.208 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:04:02.710Z,1422651842.710 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:04:03.191Z,1422651843.191 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:04:03.643Z,1422651843.643 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:04:04.060Z,1422651844.060 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:04:04.508Z,1422651844.508 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:04:04.921Z,1422651844.921 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:04:04.979Z,1422651844.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:04:05.398Z,1422651845.398 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:04:05.412Z,1422651845.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:04:05.814Z,1422651845.814 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:04:06.275Z,1422651846.275 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:04:06.708Z,1422651846.708 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:04:06.784Z,1422651846.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:04:07.201Z,1422651847.201 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:04:07.214Z,1422651847.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:04:07.626Z,1422651847.626 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:04:08.085Z,1422651848.085 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:04:08.502Z,1422651848.502 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:04:08.542Z,1422651848.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:04:08.935Z,1422651848.935 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:04:08.949Z,1422651848.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:04:09.347Z,1422651849.347 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:04:09.393Z,1422651849.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 2 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:04:09.804Z,1422651849.804 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:04:09.827Z,1422651849.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 3 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:04:10.233Z,1422651850.233 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:04:10.710Z,1422651850.710 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:04:11.138Z,1422651851.138 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:04:11.197Z,1422651851.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:04:11.595Z,1422651851.595 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:04:11.609Z,1422651851.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:04:12.020Z,1422651852.020 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:04:12.098Z,1422651852.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 2 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:04:12.481Z,1422651852.481 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:04:12.499Z,1422651852.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 3 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:04:12.905Z,1422651852.905 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:04:12.961Z,1422651852.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 4 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:04:13.370Z,1422651853.370 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:04:13.394Z,1422651853.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 5 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:04:13.811Z,1422651853.811 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:04:14.295Z,1422651854.295 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:04:14.296Z,1422651854.296 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2015-01-30T21:04:14.741Z,1422651854.741 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:04:14.823Z,1422651854.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:04:15.225Z,1422651855.225 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:04:15.255Z,1422651855.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:04:15.661Z,1422651855.661 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:04:15.745Z,1422651855.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 2 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:04:16.146Z,1422651856.146 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:04:16.161Z,1422651856.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 3 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:04:16.571Z,1422651856.571 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:04:16.667Z,1422651856.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 4 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:04:17.067Z,1422651857.067 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:04:17.112Z,1422651857.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 5 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:04:17.516Z,1422651857.516 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:04:17.949Z,1422651857.949 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:04:18.364Z,1422651858.364 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:04:18.788Z,1422651858.788 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:04:19.207Z,1422651859.207 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:04:19.623Z,1422651859.623 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:04:20.048Z,1422651860.048 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:04:20.070Z,1422651860.070 [NAL9602](INFO): Powering down
2015-01-30T21:04:20.501Z,1422651860.501 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:04:20.925Z,1422651860.925 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:04:21.330Z,1422651861.330 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:04:21.756Z,1422651861.756 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:04:22.192Z,1422651862.192 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:04:22.616Z,1422651862.616 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:04:23.033Z,1422651863.033 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:04:23.453Z,1422651863.453 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:04:23.897Z,1422651863.897 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:04:24.327Z,1422651864.327 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:04:24.747Z,1422651864.747 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:04:25.176Z,1422651865.176 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:04:25.633Z,1422651865.633 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:04:26.042Z,1422651866.042 [DataOverHttps](INFO): setting unavailable, lastComms_.elapsed()=180.199188
2015-01-30T21:04:26.049Z,1422651866.049 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:04:26.050Z,1422651866.050 [NAL9602](INFO): Powering up
2015-01-30T21:04:26.486Z,1422651866.486 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:04:26.919Z,1422651866.919 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:04:27.357Z,1422651867.357 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:04:27.784Z,1422651867.784 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:04:28.197Z,1422651868.197 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:04:28.622Z,1422651868.622 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:04:29.058Z,1422651869.058 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:04:29.524Z,1422651869.524 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:04:29.990Z,1422651869.990 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:04:30.456Z,1422651870.456 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:04:30.910Z,1422651870.910 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:04:31.335Z,1422651871.335 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:04:31.783Z,1422651871.783 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:04:32.236Z,1422651872.236 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:04:32.692Z,1422651872.692 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:04:33.116Z,1422651873.116 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:04:33.530Z,1422651873.530 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:04:33.994Z,1422651873.994 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:04:34.415Z,1422651874.415 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:04:34.831Z,1422651874.831 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:04:35.268Z,1422651875.268 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:04:35.725Z,1422651875.725 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:04:36.145Z,1422651876.145 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:04:36.560Z,1422651876.560 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:04:36.996Z,1422651876.996 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:04:37.017Z,1422651877.017 [NAL9602](INFO): NAL9602 initialized
2015-01-30T21:04:37.447Z,1422651877.447 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:04:37.872Z,1422651877.872 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:04:38.285Z,1422651878.285 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:04:38.709Z,1422651878.709 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:04:39.150Z,1422651879.150 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:04:39.571Z,1422651879.571 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:04:39.991Z,1422651879.991 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:04:40.424Z,1422651880.424 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:04:40.876Z,1422651880.876 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:04:41.298Z,1422651881.298 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:04:41.722Z,1422651881.722 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:04:42.138Z,1422651882.138 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:04:42.583Z,1422651882.583 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:04:42.000Z,1422651883.000 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:04:43.432Z,1422651883.432 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:04:43.830Z,1422651883.830 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:04:44.278Z,1422651884.278 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:04:44.741Z,1422651884.741 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:04:45.155Z,1422651885.155 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:04:45.644Z,1422651885.644 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:04:46.073Z,1422651886.073 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:04:46.533Z,1422651886.533 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:04:47.002Z,1422651887.002 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:04:47.459Z,1422651887.459 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:04:47.884Z,1422651887.884 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:04:48.316Z,1422651888.316 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:04:48.741Z,1422651888.741 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:04:49.205Z,1422651889.205 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:04:49.634Z,1422651889.634 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:04:50.051Z,1422651890.051 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:04:50.068Z,1422651890.068 [Default:UpdateAndReportMinutesSinceMissionStarted] Running Loop=1
2015-01-30T21:04:50.068Z,1422651890.068 [Default:UpdateAndReportMinutesSinceMissionStarted](INFO): Aggregate::initialize Default:UpdateAndReportMinutesSinceMissionStarted
2015-01-30T21:04:50.068Z,1422651890.068 [Default:UpdateAndReportMinutesSinceMissionStarted:A] Running Loop=1
2015-01-30T21:04:50.069Z,1422651890.069 [Default:UpdateAndReportMinutesSinceMissionStarted:A] Stopped
2015-01-30T21:04:50.069Z,1422651890.069 [Default:UpdateAndReportMinutesSinceMissionStarted:B] Running Loop=1
2015-01-30T21:04:50.496Z,1422651890.496 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:04:50.551Z,1422651890.551 [Default:UpdateAndReportMinutesSinceMissionStarted:B](IMPORTANT): Default mission has been running for 11.955398 min 
2015-01-30T21:04:50.551Z,1422651890.551 [Default:UpdateAndReportMinutesSinceMissionStarted:B] Stopped
2015-01-30T21:04:50.551Z,1422651890.551 [Default:UpdateAndReportMinutesSinceMissionStarted](INFO): Completed Default:UpdateAndReportMinutesSinceMissionStarted
2015-01-30T21:04:50.551Z,1422651890.551 [Default:UpdateAndReportMinutesSinceMissionStarted] Stopped
2015-01-30T21:04:50.552Z,1422651890.552 [Default:UpdateAndReportMinutesSinceMissionStarted](INFO): Aggregate::uninitialize Default:UpdateAndReportMinutesSinceMissionStarted
2015-01-30T21:04:50.952Z,1422651890.952 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:04:51.398Z,1422651891.398 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:04:51.837Z,1422651891.837 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:04:52.274Z,1422651892.274 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:04:52.723Z,1422651892.723 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:04:53.140Z,1422651893.140 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:04:53.572Z,1422651893.572 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:04:53.998Z,1422651893.998 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:04:54.430Z,1422651894.430 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:04:54.854Z,1422651894.854 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:04:55.271Z,1422651895.271 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:04:55.696Z,1422651895.696 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:04:56.132Z,1422651896.132 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:04:56.549Z,1422651896.549 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2015-01-30T21:04:56.559Z,1422651896.559 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:04:56.977Z,1422651896.977 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:04:57.390Z,1422651897.390 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:04:57.856Z,1422651897.856 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:04:58.275Z,1422651898.275 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:04:58.724Z,1422651898.724 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:04:59.168Z,1422651899.168 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:04:59.618Z,1422651899.618 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:05:00.086Z,1422651900.086 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:05:00.507Z,1422651900.507 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:05:00.968Z,1422651900.968 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:05:01.436Z,1422651901.436 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:05:01.857Z,1422651901.857 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:05:02.278Z,1422651902.278 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:05:02.710Z,1422651902.710 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:05:03.170Z,1422651903.170 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:05:03.596Z,1422651903.596 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:05:04.020Z,1422651904.020 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:05:04.437Z,1422651904.437 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:05:04.882Z,1422651904.882 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:05:05.310Z,1422651905.310 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:05:05.731Z,1422651905.731 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:05:06.152Z,1422651906.152 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:05:06.648Z,1422651906.648 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:05:06.659Z,1422651906.659 [NAL9602](FAULT): Queried for signal strength and failed to receive proper response. no error
2015-01-30T21:05:06.743Z,1422651906.743 [NAL9602](ERROR): received: 
COMMAND MODE: Started

COMMAND MODE: Ready for Input

2015-01-30T21:05:06.743Z,1422651906.743 [NAL9602] Data Fault, FailCount= 1
2015-01-30T21:05:06.743Z,1422651906.743 [NAL9602](ERROR): Data Fault
2015-01-30T21:05:06.797Z,1422651906.797 [CBIT](ERROR): Data Fault in component: NAL9602
2015-01-30T21:05:07.165Z,1422651907.165 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:05:07.166Z,1422651907.166 [NAL9602](INFO): Powering down
2015-01-30T21:05:07.594Z,1422651907.594 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:05:08.063Z,1422651908.063 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:05:08.090Z,1422651908.090 [CBIT](INFO): Clearing failed state for component NAL9602
2015-01-30T21:05:08.091Z,1422651908.091 [NAL9602] No Fault, FailCount= 1
2015-01-30T21:05:08.495Z,1422651908.495 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:05:08.920Z,1422651908.920 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:05:09.341Z,1422651909.341 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:05:09.814Z,1422651909.814 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:05:10.238Z,1422651910.238 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:05:10.655Z,1422651910.655 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:05:11.087Z,1422651911.087 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:05:11.532Z,1422651911.532 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:05:11.952Z,1422651911.952 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:05:12.377Z,1422651912.377 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:05:12.378Z,1422651912.378 [NAL9602](INFO): Powering up NAL9602
2015-01-30T21:05:12.802Z,1422651912.802 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:05:13.299Z,1422651913.299 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:05:13.742Z,1422651913.742 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:05:14.153Z,1422651914.153 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:05:14.621Z,1422651914.621 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:05:15.041Z,1422651915.041 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:05:15.482Z,1422651915.482 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:05:15.931Z,1422651915.931 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:05:16.360Z,1422651916.360 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:05:16.808Z,1422651916.808 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:05:17.233Z,1422651917.233 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:05:17.640Z,1422651917.640 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:05:18.075Z,1422651918.075 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:05:18.511Z,1422651918.511 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:05:18.928Z,1422651918.928 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:05:19.368Z,1422651919.368 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:05:19.817Z,1422651919.817 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:05:20.266Z,1422651920.266 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:05:20.694Z,1422651920.694 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:05:21.115Z,1422651921.115 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:05:21.540Z,1422651921.540 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:05:21.993Z,1422651921.993 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:05:22.425Z,1422651922.425 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:05:22.850Z,1422651922.850 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:05:23.310Z,1422651923.310 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:05:23.332Z,1422651923.332 [NAL9602](INFO): NAL9602 initialized
2015-01-30T21:05:23.787Z,1422651923.787 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:05:24.256Z,1422651924.256 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:05:24.708Z,1422651924.708 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:05:25.658Z,1422651925.658 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:05:26.103Z,1422651926.103 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:05:26.515Z,1422651926.515 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:05:26.944Z,1422651926.944 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:05:27.425Z,1422651927.425 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:05:27.902Z,1422651927.902 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:05:28.340Z,1422651928.340 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:05:28.823Z,1422651928.823 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:05:29.759Z,1422651929.759 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:05:30.258Z,1422651930.258 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:05:30.714Z,1422651930.714 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:05:30.746Z,1422651930.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:05:31.155Z,1422651931.155 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:05:31.190Z,1422651931.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:05:31.607Z,1422651931.607 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:05:32.164Z,1422651932.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 2 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:05:32.573Z,1422651932.573 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:05:32.606Z,1422651932.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 3 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:05:33.013Z,1422651933.013 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:05:33.056Z,1422651933.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 4 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:05:33.462Z,1422651933.462 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:05:33.485Z,1422651933.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 5 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:05:33.895Z,1422651933.895 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:05:34.376Z,1422651934.376 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:05:34.800Z,1422651934.800 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:05:34.849Z,1422651934.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:05:35.252Z,1422651935.252 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:05:35.265Z,1422651935.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:05:35.681Z,1422651935.681 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:05:36.635Z,1422651936.635 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:05:37.080Z,1422651937.080 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:05:37.115Z,1422651937.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:05:37.529Z,1422651937.529 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:05:37.543Z,1422651937.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:05:37.953Z,1422651937.953 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:05:38.035Z,1422651938.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 2 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:05:38.443Z,1422651938.443 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:05:38.990Z,1422651938.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 3 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:05:39.395Z,1422651939.395 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:05:39.466Z,1422651939.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 4 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:05:39.872Z,1422651939.872 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:05:39.899Z,1422651939.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 5 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:05:40.293Z,1422651940.293 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:05:40.746Z,1422651940.746 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:05:41.195Z,1422651941.195 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:05:41.663Z,1422651941.663 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:05:42.079Z,1422651942.079 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:05:42.122Z,1422651942.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:05:42.532Z,1422651942.532 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:05:43.073Z,1422651943.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:05:43.478Z,1422651943.478 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:05:43.563Z,1422651943.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 2 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:05:43.970Z,1422651943.970 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:05:43.984Z,1422651943.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 3 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:05:44.399Z,1422651944.399 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:05:44.474Z,1422651944.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 4 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:05:44.868Z,1422651944.868 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:05:44.907Z,1422651944.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 5 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:05:45.297Z,1422651945.297 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:05:46.286Z,1422651946.286 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:05:46.755Z,1422651946.755 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:05:47.171Z,1422651947.171 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:05:47.600Z,1422651947.600 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:05:48.057Z,1422651948.057 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:05:48.473Z,1422651948.473 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:05:48.522Z,1422651948.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:05:48.926Z,1422651948.926 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:05:48.939Z,1422651948.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:05:49.347Z,1422651949.347 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:05:49.901Z,1422651949.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 2 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:05:50.297Z,1422651950.297 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:05:50.338Z,1422651950.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 3 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:05:50.749Z,1422651950.749 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:05:50.784Z,1422651950.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 4 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:05:51.209Z,1422651951.209 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:05:51.223Z,1422651951.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 5 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:05:51.642Z,1422651951.642 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:05:52.115Z,1422651952.115 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:05:53.041Z,1422651953.041 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:05:53.132Z,1422651953.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:05:53.537Z,1422651953.537 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:05:53.551Z,1422651953.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:05:53.974Z,1422651953.974 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:05:54.459Z,1422651954.459 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:05:54.920Z,1422651954.920 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:05:54.968Z,1422651954.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:05:55.380Z,1422651955.380 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:05:55.394Z,1422651955.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:05:55.817Z,1422651955.817 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:05:56.262Z,1422651956.262 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:05:57.227Z,1422651957.227 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2015-01-30T21:05:57.235Z,1422651957.235 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:05:57.304Z,1422651957.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:05:57.720Z,1422651957.720 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:05:57.733Z,1422651957.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:05:58.136Z,1422651958.136 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:05:58.192Z,1422651958.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 2 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:05:58.593Z,1422651958.593 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:05:58.649Z,1422651958.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 3 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:05:59.054Z,1422651959.054 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:05:59.618Z,1422651959.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 4 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:06:00.023Z,1422651960.023 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:06:00.079Z,1422651960.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 5 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:06:00.480Z,1422651960.480 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:06:00.928Z,1422651960.928 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:06:01.374Z,1422651961.374 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:06:01.843Z,1422651961.843 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:06:02.262Z,1422651962.262 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:06:02.687Z,1422651962.687 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:06:03.112Z,1422651963.112 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:06:04.038Z,1422651964.038 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:06:04.527Z,1422651964.527 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:06:04.957Z,1422651964.957 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:06:05.380Z,1422651965.380 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:06:05.812Z,1422651965.812 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:06:06.774Z,1422651966.774 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:06:07.214Z,1422651967.214 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:06:07.643Z,1422651967.643 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:06:08.084Z,1422651968.084 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:06:08.552Z,1422651968.552 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:06:08.985Z,1422651968.985 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:06:09.398Z,1422651969.398 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:06:09.810Z,1422651969.810 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:06:10.243Z,1422651970.243 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:06:11.189Z,1422651971.189 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:06:11.649Z,1422651971.649 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:06:12.082Z,1422651972.082 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:06:12.531Z,1422651972.531 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:06:13.015Z,1422651973.015 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:06:14.021Z,1422651974.021 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:06:14.470Z,1422651974.470 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:06:14.898Z,1422651974.898 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:06:15.357Z,1422651975.357 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:06:15.816Z,1422651975.816 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:06:16.288Z,1422651976.288 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:06:16.741Z,1422651976.741 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:06:17.150Z,1422651977.150 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:06:18.128Z,1422651978.128 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:06:18.568Z,1422651978.568 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:06:18.993Z,1422651978.993 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:06:19.401Z,1422651979.401 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:06:19.862Z,1422651979.862 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:06:20.804Z,1422651980.804 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:06:21.284Z,1422651981.284 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:06:21.709Z,1422651981.709 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:06:22.130Z,1422651982.130 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:06:22.583Z,1422651982.583 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:06:23.035Z,1422651983.035 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:06:23.456Z,1422651983.456 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:06:23.900Z,1422651983.900 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:06:24.842Z,1422651984.842 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:06:25.322Z,1422651985.322 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:06:25.761Z,1422651985.761 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:06:26.196Z,1422651986.196 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:06:26.637Z,1422651986.637 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:06:27.606Z,1422651987.606 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:06:28.067Z,1422651988.067 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:06:28.110Z,1422651988.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): No water reference layer data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:06:28.527Z,1422651988.527 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:06:28.572Z,1422651988.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): No water reference layer data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:06:28.975Z,1422651988.975 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:06:29.003Z,1422651989.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): No water reference layer data -- 2 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:06:29.416Z,1422651989.416 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:06:29.865Z,1422651989.865 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:06:30.314Z,1422651990.314 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:06:30.727Z,1422651990.727 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:06:31.192Z,1422651991.192 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:06:32.169Z,1422651992.169 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:06:32.610Z,1422651992.610 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:06:33.030Z,1422651993.030 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:06:33.455Z,1422651993.455 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:06:33.932Z,1422651993.932 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:06:34.860Z,1422651994.860 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:06:35.314Z,1422651995.314 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:06:35.767Z,1422651995.767 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:06:36.183Z,1422651996.183 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:06:36.616Z,1422651996.616 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:06:37.045Z,1422651997.045 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:06:37.490Z,1422651997.490 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:06:37.914Z,1422651997.914 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:06:38.339Z,1422651998.339 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:06:39.272Z,1422651999.272 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:06:39.781Z,1422651999.781 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:06:40.209Z,1422652000.209 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:06:40.634Z,1422652000.634 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:06:41.083Z,1422652001.083 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:06:42.049Z,1422652002.049 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:06:42.517Z,1422652002.517 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:06:43.003Z,1422652003.003 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:06:43.427Z,1422652003.427 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:06:43.492Z,1422652003.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:06:43.908Z,1422652003.908 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:06:43.946Z,1422652003.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:06:44.356Z,1422652004.356 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:06:44.397Z,1422652004.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 2 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:06:44.825Z,1422652004.825 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:06:44.876Z,1422652004.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 3 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:06:45.273Z,1422652005.273 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:06:45.823Z,1422652005.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 4 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:06:46.222Z,1422652006.222 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:06:46.282Z,1422652006.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 5 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:06:46.688Z,1422652006.688 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:06:47.169Z,1422652007.169 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:06:47.589Z,1422652007.589 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:06:48.042Z,1422652008.042 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:06:48.979Z,1422652008.979 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:06:49.424Z,1422652009.424 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:06:49.840Z,1422652009.840 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:06:50.257Z,1422652010.257 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:06:50.718Z,1422652010.718 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:06:51.134Z,1422652011.134 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:06:51.547Z,1422652011.547 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:06:51.976Z,1422652011.976 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:06:52.412Z,1422652012.412 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:06:53.342Z,1422652013.342 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:06:53.824Z,1422652013.824 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:06:54.243Z,1422652014.243 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:06:54.672Z,1422652014.672 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:06:55.113Z,1422652015.113 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:06:56.086Z,1422652016.086 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:06:56.543Z,1422652016.543 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:06:56.604Z,1422652016.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): No water reference layer data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:06:57.008Z,1422652017.008 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2015-01-30T21:06:57.016Z,1422652017.016 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:06:57.029Z,1422652017.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): No water reference layer data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:06:57.444Z,1422652017.444 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:06:57.507Z,1422652017.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): No water reference layer data -- 2 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:06:57.901Z,1422652017.901 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:06:57.913Z,1422652017.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): No water reference layer data -- 3 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:06:58.330Z,1422652018.330 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:06:58.806Z,1422652018.806 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:06:59.223Z,1422652019.223 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:07:00.201Z,1422652020.201 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:07:00.694Z,1422652020.694 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:07:01.146Z,1422652021.146 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:07:01.611Z,1422652021.611 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:07:02.047Z,1422652022.047 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:07:02.000Z,1422652023.000 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:07:03.442Z,1422652023.442 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:07:03.858Z,1422652023.858 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:07:04.270Z,1422652024.270 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:07:04.732Z,1422652024.732 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:07:05.164Z,1422652025.164 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:07:05.572Z,1422652025.572 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:07:05.985Z,1422652025.985 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:07:06.939Z,1422652026.939 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:07:07.396Z,1422652027.396 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:07:07.816Z,1422652027.816 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:07:08.246Z,1422652028.246 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:07:08.722Z,1422652028.722 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:07:09.147Z,1422652029.147 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:07:09.571Z,1422652029.571 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:07:10.508Z,1422652030.508 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:07:11.054Z,1422652031.054 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:07:13.565Z,1422652033.565 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:07:14.018Z,1422652034.018 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:07:14.439Z,1422652034.439 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:07:14.904Z,1422652034.904 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:07:15.324Z,1422652035.324 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:07:15.845Z,1422652035.845 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:07:16.274Z,1422652036.274 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:07:16.735Z,1422652036.735 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:07:17.167Z,1422652037.167 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:07:17.587Z,1422652037.587 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:07:18.008Z,1422652038.008 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:07:18.449Z,1422652038.449 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:07:18.873Z,1422652038.873 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:07:19.314Z,1422652039.314 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:07:19.739Z,1422652039.739 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:07:20.151Z,1422652040.151 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:07:20.580Z,1422652040.580 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:07:21.017Z,1422652041.017 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:07:21.445Z,1422652041.445 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:07:21.862Z,1422652041.862 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:07:22.279Z,1422652042.279 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:07:22.715Z,1422652042.715 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:07:23.138Z,1422652043.138 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:07:23.553Z,1422652043.553 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:07:23.973Z,1422652043.973 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:07:24.005Z,1422652044.005 [NAL9602](INFO): SBD MO Status=2, MOMSN=47160, MT Status=2, MTMSN=0
2015-01-30T21:07:24.005Z,1422652044.005 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2015-01-30T21:07:24.430Z,1422652044.430 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:07:24.859Z,1422652044.859 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:07:25.271Z,1422652045.271 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:07:25.732Z,1422652045.732 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:07:26.181Z,1422652046.181 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:07:26.605Z,1422652046.605 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:07:27.018Z,1422652047.018 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:07:27.467Z,1422652047.467 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:07:27.944Z,1422652047.944 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:07:28.471Z,1422652048.471 [BPC1](FAULT): B bank: No match for serial number:5911 was found in the onboard configuration.
2015-01-30T21:07:28.471Z,1422652048.471 [BPC1](FAULT): Failed to parse bank B battery data
2015-01-30T21:07:28.471Z,1422652048.471 [BPC1] Data Fault, FailCount= 1
2015-01-30T21:07:28.471Z,1422652048.471 [BPC1](ERROR): Data Fault
2015-01-30T21:07:28.518Z,1422652048.518 [CBIT](ERROR): Data Fault in component: BPC1
2015-01-30T21:07:28.906Z,1422652048.906 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:07:29.454Z,1422652049.454 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:07:31.901Z,1422652051.901 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:07:31.977Z,1422652051.977 [CBIT](INFO): Clearing failed state for component BPC1
2015-01-30T21:07:31.977Z,1422652051.977 [BPC1] No Fault, FailCount= 1
2015-01-30T21:07:32.334Z,1422652052.334 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:07:32.831Z,1422652052.831 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:07:33.336Z,1422652053.336 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:07:33.759Z,1422652053.759 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:07:34.197Z,1422652054.197 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:07:34.626Z,1422652054.626 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:07:35.075Z,1422652055.075 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:07:35.499Z,1422652055.499 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:07:35.943Z,1422652055.943 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:07:36.385Z,1422652056.385 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:07:36.825Z,1422652056.825 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:07:37.237Z,1422652057.237 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:07:37.683Z,1422652057.683 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:07:38.112Z,1422652058.112 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:07:38.544Z,1422652058.544 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:07:38.981Z,1422652058.981 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:07:39.038Z,1422652059.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:07:39.441Z,1422652059.441 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:07:39.467Z,1422652059.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:07:39.866Z,1422652059.866 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:07:40.299Z,1422652060.299 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:07:40.727Z,1422652060.727 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:07:40.785Z,1422652060.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:07:41.184Z,1422652061.184 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:07:41.198Z,1422652061.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:07:41.601Z,1422652061.601 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:07:42.049Z,1422652062.049 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:07:42.486Z,1422652062.486 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:07:42.935Z,1422652062.935 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:07:43.367Z,1422652063.367 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:07:43.808Z,1422652063.808 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:07:44.269Z,1422652064.269 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:07:44.350Z,1422652064.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:07:44.753Z,1422652064.753 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:07:44.801Z,1422652064.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:07:45.193Z,1422652065.193 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:07:45.639Z,1422652065.639 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:07:46.059Z,1422652066.059 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:07:46.147Z,1422652066.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:07:46.552Z,1422652066.552 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:07:46.568Z,1422652066.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:07:46.977Z,1422652066.977 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:07:47.008Z,1422652067.008 [NAL9602](INFO): SBD MO Status=2, MOMSN=47160, MT Status=2, MTMSN=0
2015-01-30T21:07:47.008Z,1422652067.008 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2015-01-30T21:07:47.462Z,1422652067.462 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:07:47.919Z,1422652067.919 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:07:48.363Z,1422652068.363 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:07:48.820Z,1422652068.820 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:07:52.112Z,1422652072.112 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:07:53.047Z,1422652073.047 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:07:53.539Z,1422652073.539 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:07:53.955Z,1422652073.955 [DataOverHttps](INFO): setting available, lastComms_.elapsed()=0.002406
2015-01-30T21:07:53.961Z,1422652073.961 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:07:54.008Z,1422652074.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:07:54.421Z,1422652074.421 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:07:54.447Z,1422652074.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:07:54.853Z,1422652074.853 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:07:58.127Z,1422652078.127 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:07:58.566Z,1422652078.566 [DataOverHttps](INFO): Sending 228 bytes from file Logs/20150130T204932/Courier0012.lzma
2015-01-30T21:07:58.574Z,1422652078.574 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:07:59.045Z,1422652079.045 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:07:59.454Z,1422652079.454 [DataOverHttps](INFO): Moved sent file to Logs/20150130T204932/Courier0012.lzma.bak
2015-01-30T21:07:59.454Z,1422652079.454 [DataOverHttps](INFO): SBD MOMSN=1514115
2015-01-30T21:07:59.465Z,1422652079.465 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:07:59.503Z,1422652079.503 [NAL9602](INFO): Powering down
2015-01-30T21:07:59.957Z,1422652079.957 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:08:00.402Z,1422652080.402 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:08:00.852Z,1422652080.852 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:08:04.157Z,1422652084.157 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:08:04.189Z,1422652084.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:08:04.605Z,1422652084.605 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:08:04.654Z,1422652084.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:08:05.061Z,1422652085.061 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:08:05.558Z,1422652085.558 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:08:05.982Z,1422652085.982 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:08:06.431Z,1422652086.431 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:08:09.666Z,1422652089.666 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:08:09.719Z,1422652089.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:08:10.109Z,1422652090.109 [DataOverHttps](INFO): Sending 273 bytes from file Logs/20150130T204932/Express0005.lzma
2015-01-30T21:08:10.121Z,1422652090.121 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:08:10.134Z,1422652090.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:08:10.526Z,1422652090.526 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:08:10.984Z,1422652090.984 [DataOverHttps](INFO): Moved sent file to Logs/20150130T204932/Express0005.lzma.bak
2015-01-30T21:08:10.984Z,1422652090.984 [DataOverHttps](INFO): SBD MOMSN=1514118
2015-01-30T21:08:10.994Z,1422652090.994 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:08:11.483Z,1422652091.483 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:08:11.936Z,1422652091.936 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:08:12.357Z,1422652092.357 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:08:12.797Z,1422652092.797 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:08:13.222Z,1422652093.222 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:08:13.663Z,1422652093.663 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:08:14.091Z,1422652094.091 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:08:14.536Z,1422652094.536 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:08:14.963Z,1422652094.963 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:08:14.995Z,1422652094.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:08:18.391Z,1422652098.391 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:08:18.432Z,1422652098.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:08:18.838Z,1422652098.838 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:08:19.291Z,1422652099.291 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:08:19.720Z,1422652099.720 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:08:20.232Z,1422652100.232 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:08:20.666Z,1422652100.666 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:08:23.987Z,1422652103.987 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:08:24.431Z,1422652104.431 [DataOverHttps](INFO): Sending 228 bytes from file Logs/20150130T204932/Express0009.lzma
2015-01-30T21:08:24.444Z,1422652104.444 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:08:24.892Z,1422652104.892 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:08:25.313Z,1422652105.313 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:08:25.345Z,1422652105.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:08:25.747Z,1422652105.747 [DataOverHttps](INFO): Moved sent file to Logs/20150130T204932/Express0009.lzma.bak
2015-01-30T21:08:25.747Z,1422652105.747 [DataOverHttps](INFO): SBD MOMSN=1514126
2015-01-30T21:08:25.775Z,1422652105.775 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:08:25.789Z,1422652105.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:08:26.226Z,1422652106.226 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:08:26.656Z,1422652106.656 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:08:29.881Z,1422652109.881 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:08:29.929Z,1422652109.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:08:30.344Z,1422652110.344 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:08:30.357Z,1422652110.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:08:30.770Z,1422652110.770 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:08:31.214Z,1422652111.214 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:08:31.634Z,1422652111.634 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:08:32.087Z,1422652112.087 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:08:35.512Z,1422652115.512 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:08:35.964Z,1422652115.964 [DataOverHttps](INFO): Sending 934 bytes from file Logs/20150130T204932/Express0013.lzma
2015-01-30T21:08:35.983Z,1422652115.983 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:08:36.426Z,1422652116.426 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:08:36.863Z,1422652116.863 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:08:37.295Z,1422652117.295 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:08:37.377Z,1422652117.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:08:37.748Z,1422652117.748 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:08:37.767Z,1422652117.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:08:38.180Z,1422652118.180 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:08:38.637Z,1422652118.637 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:08:39.055Z,1422652119.055 [DataOverHttps](INFO): Moved sent file to Logs/20150130T204932/Express0013.lzma.bak
2015-01-30T21:08:39.056Z,1422652119.056 [DataOverHttps](INFO): SBD MOMSN=1514133
2015-01-30T21:08:39.067Z,1422652119.067 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:08:39.113Z,1422652119.113 [BPC1](FAULT): Failed to receive battery data
2015-01-30T21:08:39.113Z,1422652119.113 [BPC1] Communications Fault, FailCount= 1
2015-01-30T21:08:39.113Z,1422652119.113 [BPC1](ERROR): Communications Fault
2015-01-30T21:08:39.133Z,1422652119.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:08:39.165Z,1422652119.165 [CBIT](ERROR): Communications Fault in component: BPC1
2015-01-30T21:08:39.563Z,1422652119.563 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:08:39.576Z,1422652119.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:08:39.582Z,1422652119.582 [Default:CheckIn:Read_Iridium] Stopped
2015-01-30T21:08:39.583Z,1422652119.583 [Default:CheckIn](INFO): Completed Default:CheckIn
2015-01-30T21:08:39.583Z,1422652119.583 [Default:CheckIn] Stopped
2015-01-30T21:08:39.583Z,1422652119.583 [Default:CheckIn](INFO): Aggregate::uninitialize Default:CheckIn
2015-01-30T21:08:39.583Z,1422652119.583 [Default:CheckIn:A.SetSpeed] Stopped
2015-01-30T21:08:39.583Z,1422652119.583 [Default:CheckIn:A.SetSpeed](DEBUG): Uninitialize.
2015-01-30T21:08:39.983Z,1422652119.983 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:08:47.740Z,1422652127.740 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:08:47.783Z,1422652127.783 [CBIT](INFO): Clearing failed state for component BPC1
2015-01-30T21:08:47.783Z,1422652127.783 [BPC1] No Fault, FailCount= 1
2015-01-30T21:08:49.943Z,1422652129.943 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:08:54.935Z,1422652134.935 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:08:59.946Z,1422652139.946 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:09:04.938Z,1422652144.938 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:09:09.942Z,1422652149.942 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:09:09.997Z,1422652149.997 [BPC1](ERROR): B bank expecting battery number:1 and read number: uart read:X
$S,01,65B4,02,00,04,64%23
$C1,01,7F,02,00,03,7F,04,00,05,00,06,00,07,00%72
$B11,02,000A,01,02A8,03,0001,08,0B89,09,4127,0A,FFFC,0B,FFFE%3E
$B11,0C,0001,0D,0064,0E,005F,0F,1928,10,192C,11,FFFF,12,FFFF%4F
$B11,13,FFFF,14,0000,15,41A0,16,00E0,17,0001,18,1A90,19,3840%37
$B11,1A,0031,1B,458B,1C,0091%42
$B12,02,000A,01,02A8,03,0001,08,0B87,09,4121,0A,FFFD,0B,FFFF%31
$B12,0C,0001,0D,0064,0E,0060,0F,193D,10,1940,11,FFFF,12,FFFF%31
$B12,13,FFFF,14,0000,15,41A0,16,00E0,17,0001,18,1A90,19,3840%34
$B12,1A,0031,1B,458F,1C,0153%4A
$B13,02,000A,01,02A8,03,0001,08,0B81,09,4129,0A,FFFC,0B,FFFD%3B
$B13,0C,0001,0D,0064,0E,005E,0F,18F3,10,18F7,11,FFFF,12,FFFF%31
$B13,13,FFFF,14,0000,15,41A0,16,00E0,17,0001,18,1A90,19,3840%35
$B13,1A,0031,1B,458B,1C,00AF%4F
$B14,02,000A,01,02A8,03,0001,08,0B7C,09,4124,0A,FFFD,0B,FFFE%4A
$B14,0C,0001,0D,0064,0E,0060,0F,1975,10,1975,11,FFFF,12,FFFF%44
$B14,13,FFFF,14,0000,15,41A0,16,00E0,17,0001,18,1A90,19,3840%32
$B14,1A,0031,1B,458F,1C,0151%4E
$B15,02,000A,01,02A8,03,0001,08,0B8D,09,40EB,0A,0000,0B,0001%43
$B15,0C,0001,0D,0064,0E,0062,0F,19CE,10,19CE,11,FFFF,12,FFFF%47
$B15,13,0000,14,0000,15,41A0,16,00E0,17,0001,18,1A90,19,3840%33
$B15,1A,0031,1B,458C,1C,00DC%48
$B16,02,000A,01,02A8,03,0001,08,0B78,09,40EB,0A,0000,0B,0001%33
$B16,0C,0001,0D,0064,0E,0060,0F,194A,10,194A,11,FFFF,12,FFFF%46
$B16,13,0000,14,0000,15,41A0,16,00E0,17,0001,18,1A90,19,3840%30
$B16,1A,0031,1B,458B,1C,00BA%4E
$B17,02,000A,01,02A8,03,0001,08,0B73,09,406F,0A,FFA4,0B,FFA1%4A
$B17,0C,0001,0D,0062,0E,005C,0F,1864,10,18F4,11,0FE8,12,0F68%32
$B17,13,FFFF,14,0000,15,41A0,16,00E0,17,0001,18,1A90,19,3840%31
$B17,1A,0031,1B,458C,1C,00DA%48
$S,01,67B2,02,00,04,64%27
$C1,01,7F,02,00,03,7F,04,00,05,00,06,00,07,00%72
$B11,0A,FFFC%36
$B12,0A,FFFD%32
$B13,0A,FFFC%34
$B14,0A,FFFD%34
$B15,0A,0000%37
$B16,0A,0000%34
$B17,0A,FF9F%4A
458B,1C,008E%31
$B18,02,000A,01,02A8,03,0001,08,0B82,09,405B,0A,FFA0,0B,FF98%39
$B18,0C,0001,0D,0062,0E,0060,0F,193E,10,19F5,11,0FC7,12,0E90%35
$B18,13,FFFF,14,0000,15,41A0,16,00E0,17,0001,18,1A90,19,3840%3E
$B18,1A,0031,1B,458B,1C,00AC%41

2015-01-30T21:09:09.997Z,1422652149.997 [BPC1](FAULT): Failed to parse bank B battery data
2015-01-30T21:09:09.997Z,1422652149.997 [BPC1] Data Fault, FailCount= 2
2015-01-30T21:09:09.997Z,1422652149.997 [BPC1](ERROR): Data Fault
2015-01-30T21:09:10.122Z,1422652150.122 [CBIT](ERROR): Data Fault in component: BPC1
2015-01-30T21:09:14.934Z,1422652154.934 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:09:19.933Z,1422652159.933 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:09:24.933Z,1422652164.933 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:09:24.981Z,1422652164.981 [CBIT](INFO): Clearing failed state for component BPC1
2015-01-30T21:09:24.981Z,1422652164.981 [BPC1] No Fault, FailCount= 2
2015-01-30T21:09:29.933Z,1422652169.933 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:09:34.945Z,1422652174.945 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:09:39.952Z,1422652179.952 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:09:44.953Z,1422652184.953 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:09:52.898Z,1422652192.898 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:09:52.927Z,1422652192.927 [BPC1](FAULT): Failed to receive battery data
2015-01-30T21:09:52.927Z,1422652192.927 [BPC1] Communications Fault, FailCount= 3
2015-01-30T21:09:52.927Z,1422652192.927 [BPC1](ERROR): Communications Fault
2015-01-30T21:09:52.934Z,1422652192.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:09:52.940Z,1422652192.940 [Default:UpdateAndReportMinutesSinceMissionStarted] Running Loop=1
2015-01-30T21:09:52.940Z,1422652192.940 [Default:UpdateAndReportMinutesSinceMissionStarted](INFO): Aggregate::initialize Default:UpdateAndReportMinutesSinceMissionStarted
2015-01-30T21:09:52.940Z,1422652192.940 [Default:UpdateAndReportMinutesSinceMissionStarted:A] Running Loop=1
2015-01-30T21:09:52.941Z,1422652192.941 [Default:UpdateAndReportMinutesSinceMissionStarted:A] Stopped
2015-01-30T21:09:52.941Z,1422652192.941 [Default:UpdateAndReportMinutesSinceMissionStarted:B] Running Loop=1
2015-01-30T21:09:52.995Z,1422652192.995 [CBIT](ERROR): Communications Fault in component: BPC1
2015-01-30T21:09:54.936Z,1422652194.936 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:09:54.965Z,1422652194.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:09:54.971Z,1422652194.971 [Default:UpdateAndReportMinutesSinceMissionStarted:B](IMPORTANT): Default mission has been running for 16.954323 min 
2015-01-30T21:09:54.971Z,1422652194.971 [Default:UpdateAndReportMinutesSinceMissionStarted:B] Stopped
2015-01-30T21:09:54.971Z,1422652194.971 [Default:UpdateAndReportMinutesSinceMissionStarted](INFO): Completed Default:UpdateAndReportMinutesSinceMissionStarted
2015-01-30T21:09:54.971Z,1422652194.971 [Default:UpdateAndReportMinutesSinceMissionStarted] Stopped
2015-01-30T21:09:54.971Z,1422652194.971 [Default:UpdateAndReportMinutesSinceMissionStarted](INFO): Aggregate::uninitialize Default:UpdateAndReportMinutesSinceMissionStarted
2015-01-30T21:09:59.935Z,1422652199.935 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:09:59.983Z,1422652199.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 2 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:10:04.939Z,1422652204.939 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:10:04.969Z,1422652204.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 3 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:10:04.984Z,1422652204.984 [CBIT](INFO): Clearing failed state for component BPC1
2015-01-30T21:10:04.984Z,1422652204.984 [BPC1] No Fault, FailCount= 3
2015-01-30T21:10:09.939Z,1422652209.939 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:10:10.051Z,1422652210.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 4 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:10:14.960Z,1422652214.960 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:10:15.012Z,1422652215.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 5 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:10:19.933Z,1422652219.933 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:10:24.934Z,1422652224.934 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:10:29.932Z,1422652229.932 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:10:34.938Z,1422652234.938 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:10:39.928Z,1422652239.928 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:10:44.933Z,1422652244.933 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:10:49.941Z,1422652249.941 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:10:57.907Z,1422652257.907 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:10:59.961Z,1422652259.961 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:11:04.940Z,1422652264.940 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:11:09.952Z,1422652269.952 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:11:14.940Z,1422652274.940 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:11:14.947Z,1422652274.947 [BPC1](FAULT): Failed to receive battery data
2015-01-30T21:11:14.947Z,1422652274.947 [BPC1] Communications Fault, FailCount= 1
2015-01-30T21:11:14.947Z,1422652274.947 [BPC1](ERROR): Communications Fault
2015-01-30T21:11:15.004Z,1422652275.004 [CBIT](ERROR): Communications Fault in component: BPC1
2015-01-30T21:11:19.944Z,1422652279.944 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:11:24.939Z,1422652284.939 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:11:29.943Z,1422652289.943 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:11:29.997Z,1422652289.997 [CBIT](INFO): Clearing failed state for component BPC1
2015-01-30T21:11:29.997Z,1422652289.997 [BPC1] No Fault, FailCount= 1
2015-01-30T21:11:34.939Z,1422652294.939 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:11:39.938Z,1422652299.938 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:11:44.934Z,1422652304.934 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:11:49.942Z,1422652309.942 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:11:57.728Z,1422652317.728 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:11:57.736Z,1422652317.736 [BPC1](FAULT): Failed to receive battery data
2015-01-30T21:11:57.736Z,1422652317.736 [BPC1] Communications Fault, FailCount= 2
2015-01-30T21:11:57.736Z,1422652317.736 [BPC1](ERROR): Communications Fault
2015-01-30T21:11:57.793Z,1422652317.793 [CBIT](ERROR): Communications Fault in component: BPC1
2015-01-30T21:11:59.937Z,1422652319.937 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:12:04.941Z,1422652324.941 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:12:09.937Z,1422652329.937 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:12:10.015Z,1422652330.015 [CBIT](INFO): Clearing failed state for component BPC1
2015-01-30T21:12:10.015Z,1422652330.015 [BPC1] No Fault, FailCount= 2
2015-01-30T21:12:14.941Z,1422652334.941 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:12:19.940Z,1422652339.940 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:12:24.940Z,1422652344.940 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:12:29.948Z,1422652349.948 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:12:34.936Z,1422652354.936 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:12:39.935Z,1422652359.935 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:12:44.935Z,1422652364.935 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:12:49.943Z,1422652369.943 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:12:57.737Z,1422652377.737 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:12:59.938Z,1422652379.938 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:13:04.929Z,1422652384.929 [Depth_Keller](ERROR): Pressure reading out of range: 1830.694946 decibar
2015-01-30T21:13:04.931Z,1422652384.931 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:13:04.938Z,1422652384.938 [BPC1](DEBUG): Received data from all battery sticks
2015-01-30T21:13:05.013Z,1422652385.013 [Radio_Surface](INFO): Powering down
2015-01-30T21:13:09.946Z,1422652389.946 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:13:10.229Z,1422652390.229 [Radio_Surface](INFO): Powering up
2015-01-30T21:13:14.926Z,1422652394.926 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:13:19.938Z,1422652399.938 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:13:24.937Z,1422652404.937 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:13:29.933Z,1422652409.933 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:13:34.941Z,1422652414.941 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:13:39.941Z,1422652419.941 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:13:40.014Z,1422652420.014 [Default:CheckIn] Running Loop=1
2015-01-30T21:13:40.014Z,1422652420.014 [Default:CheckIn](INFO): Aggregate::initialize Default:CheckIn
2015-01-30T21:13:40.014Z,1422652420.014 [Default:CheckIn:A.SetSpeed] Running Loop=1
2015-01-30T21:13:40.014Z,1422652420.014 [Default:CheckIn:A.SetSpeed](DEBUG): Initialize.
2015-01-30T21:13:40.014Z,1422652420.014 [Default:CheckIn:Read_GPS] Running Loop=1
2015-01-30T21:13:40.446Z,1422652420.446 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:13:40.449Z,1422652420.449 [NAL9602](INFO): Powering up
2015-01-30T21:13:40.891Z,1422652420.891 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:13:41.391Z,1422652421.391 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:13:41.879Z,1422652421.879 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:13:42.344Z,1422652422.344 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:13:42.777Z,1422652422.777 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:13:43.295Z,1422652423.295 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:13:43.710Z,1422652423.710 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:13:44.161Z,1422652424.161 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:13:44.579Z,1422652424.579 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:13:45.032Z,1422652425.032 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:13:45.454Z,1422652425.454 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:13:48.709Z,1422652428.709 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:13:49.122Z,1422652429.122 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:13:49.571Z,1422652429.571 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:13:50.001Z,1422652430.001 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:13:50.453Z,1422652430.453 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:13:50.873Z,1422652430.873 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:13:51.342Z,1422652431.342 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:13:51.353Z,1422652431.353 [NAL9602](INFO): NAL9602 initialized
2015-01-30T21:13:51.771Z,1422652431.771 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:13:52.256Z,1422652432.256 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:13:52.258Z,1422652432.258 [NAL9602](FAULT): GPS failed to acquire within timeout.
2015-01-30T21:13:52.258Z,1422652432.258 [NAL9602] Data Fault, FailCount= 1
2015-01-30T21:13:52.258Z,1422652432.258 [NAL9602](ERROR): Data Fault
2015-01-30T21:13:52.342Z,1422652432.342 [CBIT](ERROR): Data Fault in component: NAL9602
2015-01-30T21:13:52.739Z,1422652432.739 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:13:52.767Z,1422652432.767 [NAL9602](INFO): Powering down
2015-01-30T21:13:53.193Z,1422652433.193 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:13:53.618Z,1422652433.618 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:13:53.688Z,1422652433.688 [CBIT](INFO): Clearing failed state for component NAL9602
2015-01-30T21:13:53.688Z,1422652433.688 [NAL9602] No Fault, FailCount= 1
2015-01-30T21:13:54.074Z,1422652434.074 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:13:54.503Z,1422652434.503 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:13:54.972Z,1422652434.972 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:13:55.417Z,1422652435.417 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:13:55.862Z,1422652435.862 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:13:56.294Z,1422652436.294 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:13:56.734Z,1422652436.734 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:13:57.167Z,1422652437.167 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:13:57.621Z,1422652437.621 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:13:58.043Z,1422652438.043 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:13:58.072Z,1422652438.072 [NAL9602](INFO): Powering up NAL9602
2015-01-30T21:13:58.084Z,1422652438.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:13:58.501Z,1422652438.501 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:13:58.514Z,1422652438.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:13:58.926Z,1422652438.926 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:13:58.937Z,1422652438.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 2 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:13:59.333Z,1422652439.333 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:13:59.385Z,1422652439.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 3 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:13:59.791Z,1422652439.791 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:13:59.804Z,1422652439.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 4 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:14:00.208Z,1422652440.208 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:14:00.219Z,1422652440.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 5 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:14:00.615Z,1422652440.615 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:14:01.029Z,1422652441.029 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:14:01.467Z,1422652441.467 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:14:01.906Z,1422652441.906 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:14:02.363Z,1422652442.363 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:14:02.788Z,1422652442.788 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:14:02.821Z,1422652442.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:14:03.237Z,1422652443.237 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:14:03.250Z,1422652443.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:14:03.657Z,1422652443.657 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:14:03.714Z,1422652443.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 2 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:14:04.118Z,1422652444.118 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:14:04.131Z,1422652444.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 3 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:14:04.546Z,1422652444.546 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:14:04.583Z,1422652444.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 4 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:14:05.003Z,1422652445.003 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:14:05.016Z,1422652445.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 5 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:14:05.420Z,1422652445.420 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:14:05.845Z,1422652445.845 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:14:06.265Z,1422652446.265 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:14:06.682Z,1422652446.682 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:14:07.148Z,1422652447.148 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:14:07.619Z,1422652447.619 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:14:08.059Z,1422652448.059 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:14:08.513Z,1422652448.513 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:14:09.013Z,1422652449.013 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:14:09.494Z,1422652449.494 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:14:09.522Z,1422652449.522 [NAL9602](INFO): NAL9602 initialized
2015-01-30T21:14:09.979Z,1422652449.979 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:14:10.396Z,1422652450.396 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:14:10.872Z,1422652450.872 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:14:11.317Z,1422652451.317 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:14:11.806Z,1422652451.806 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:14:12.226Z,1422652452.226 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:14:12.279Z,1422652452.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:14:12.699Z,1422652452.699 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:14:12.726Z,1422652452.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:14:13.140Z,1422652453.140 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:14:13.592Z,1422652453.592 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:14:14.038Z,1422652454.038 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:14:14.494Z,1422652454.494 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:14:14.915Z,1422652454.915 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:14:15.357Z,1422652455.357 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:14:15.792Z,1422652455.792 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:14:16.237Z,1422652456.237 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:14:16.657Z,1422652456.657 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:14:17.102Z,1422652457.102 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:14:17.531Z,1422652457.531 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:14:17.580Z,1422652457.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:14:17.983Z,1422652457.983 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:14:17.997Z,1422652457.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:14:18.408Z,1422652458.408 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:14:18.849Z,1422652458.849 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:14:19.277Z,1422652459.277 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:14:19.312Z,1422652459.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:14:19.727Z,1422652459.727 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:14:19.740Z,1422652459.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:14:20.151Z,1422652460.151 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:14:20.603Z,1422652460.603 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:14:21.036Z,1422652461.036 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:14:21.481Z,1422652461.481 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:14:21.934Z,1422652461.934 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:14:22.394Z,1422652462.394 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:14:22.823Z,1422652462.823 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:14:23.267Z,1422652463.267 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:14:23.737Z,1422652463.737 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:14:24.177Z,1422652464.177 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:14:24.641Z,1422652464.641 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:14:25.117Z,1422652465.117 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:14:25.555Z,1422652465.555 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:14:26.007Z,1422652466.007 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:14:26.438Z,1422652466.438 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:14:26.870Z,1422652466.870 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:14:27.318Z,1422652467.318 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:14:27.768Z,1422652467.768 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:14:28.201Z,1422652468.201 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:14:28.644Z,1422652468.644 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:14:29.097Z,1422652469.097 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:14:29.521Z,1422652469.521 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:14:29.974Z,1422652469.974 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:14:30.427Z,1422652470.427 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:14:30.851Z,1422652470.851 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:14:31.276Z,1422652471.276 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:14:31.721Z,1422652471.721 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:14:32.164Z,1422652472.164 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:14:32.614Z,1422652472.614 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:14:33.048Z,1422652473.048 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:14:33.463Z,1422652473.463 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:14:33.517Z,1422652473.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:14:33.912Z,1422652473.912 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:14:33.925Z,1422652473.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:14:34.333Z,1422652474.333 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:14:34.377Z,1422652474.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 2 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:14:34.781Z,1422652474.781 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:14:34.811Z,1422652474.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 3 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:14:35.210Z,1422652475.210 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:14:35.222Z,1422652475.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 4 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:14:35.631Z,1422652475.631 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:14:35.698Z,1422652475.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 5 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:14:36.096Z,1422652476.096 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:14:36.528Z,1422652476.528 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:14:37.018Z,1422652477.018 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:14:37.449Z,1422652477.449 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:14:37.914Z,1422652477.914 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:14:38.343Z,1422652478.343 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:14:38.831Z,1422652478.831 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:14:39.288Z,1422652479.288 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:14:39.741Z,1422652479.741 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:14:40.174Z,1422652480.174 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:14:40.208Z,1422652480.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:14:40.614Z,1422652480.614 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:14:40.637Z,1422652480.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:14:41.055Z,1422652481.055 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:14:41.150Z,1422652481.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 2 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:14:41.573Z,1422652481.573 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:14:41.599Z,1422652481.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 3 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:14:42.012Z,1422652482.012 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:14:42.039Z,1422652482.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 4 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:14:42.437Z,1422652482.437 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:14:42.499Z,1422652482.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 5 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:14:42.874Z,1422652482.874 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:14:43.311Z,1422652483.311 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:14:43.312Z,1422652483.312 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check.
2015-01-30T21:14:43.834Z,1422652483.834 [NAL9602](FAULT): received: 
2015-01-30T21:14:43.834Z,1422652483.834 [NAL9602] Data Fault, FailCount= 2
2015-01-30T21:14:43.834Z,1422652483.834 [NAL9602](ERROR): Data Fault
2015-01-30T21:14:43.864Z,1422652483.864 [CBIT](ERROR): Data Fault in component: NAL9602
2015-01-30T21:14:44.263Z,1422652484.263 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:14:44.304Z,1422652484.304 [NAL9602](INFO): Powering down
2015-01-30T21:14:44.745Z,1422652484.745 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:14:45.170Z,1422652485.170 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:14:45.223Z,1422652485.223 [CBIT](INFO): Clearing failed state for component NAL9602
2015-01-30T21:14:45.223Z,1422652485.223 [NAL9602] No Fault, FailCount= 2
2015-01-30T21:14:45.614Z,1422652485.614 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:14:48.907Z,1422652488.907 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:14:49.345Z,1422652489.345 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:14:49.368Z,1422652489.368 [NAL9602](INFO): Powering up NAL9602
2015-01-30T21:14:49.789Z,1422652489.789 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:14:50.214Z,1422652490.214 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:14:50.662Z,1422652490.662 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:14:51.127Z,1422652491.127 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:14:51.567Z,1422652491.567 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:14:52.020Z,1422652492.020 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:14:52.461Z,1422652492.461 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:14:52.902Z,1422652492.902 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:14:52.978Z,1422652492.978 [Default:UpdateAndReportMinutesSinceMissionStarted] Running Loop=1
2015-01-30T21:14:52.978Z,1422652492.978 [Default:UpdateAndReportMinutesSinceMissionStarted](INFO): Aggregate::initialize Default:UpdateAndReportMinutesSinceMissionStarted
2015-01-30T21:14:52.978Z,1422652492.978 [Default:UpdateAndReportMinutesSinceMissionStarted:A] Running Loop=1
2015-01-30T21:14:52.979Z,1422652492.979 [Default:UpdateAndReportMinutesSinceMissionStarted:A] Stopped
2015-01-30T21:14:52.979Z,1422652492.979 [Default:UpdateAndReportMinutesSinceMissionStarted:B] Running Loop=1
2015-01-30T21:14:53.387Z,1422652493.387 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:14:53.405Z,1422652493.405 [Default:UpdateAndReportMinutesSinceMissionStarted:B](IMPORTANT): Default mission has been running for 22.002966 min 
2015-01-30T21:14:53.405Z,1422652493.405 [Default:UpdateAndReportMinutesSinceMissionStarted:B] Stopped
2015-01-30T21:14:53.405Z,1422652493.405 [Default:UpdateAndReportMinutesSinceMissionStarted](INFO): Completed Default:UpdateAndReportMinutesSinceMissionStarted
2015-01-30T21:14:53.406Z,1422652493.406 [Default:UpdateAndReportMinutesSinceMissionStarted] Stopped
2015-01-30T21:14:53.406Z,1422652493.406 [Default:UpdateAndReportMinutesSinceMissionStarted](INFO): Aggregate::uninitialize Default:UpdateAndReportMinutesSinceMissionStarted
2015-01-30T21:14:53.815Z,1422652493.815 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:14:54.264Z,1422652494.264 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:14:54.680Z,1422652494.680 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:14:54.718Z,1422652494.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:14:55.125Z,1422652495.125 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:14:55.148Z,1422652495.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:14:55.553Z,1422652495.553 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:14:56.022Z,1422652496.022 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:14:56.443Z,1422652496.443 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:14:56.892Z,1422652496.892 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:14:57.332Z,1422652497.332 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:14:57.802Z,1422652497.802 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:14:58.217Z,1422652498.217 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:14:58.270Z,1422652498.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:14:58.670Z,1422652498.670 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:14:58.683Z,1422652498.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:14:59.087Z,1422652499.087 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:14:59.110Z,1422652499.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 2 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:14:59.512Z,1422652499.512 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:14:59.968Z,1422652499.968 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:15:00.413Z,1422652500.413 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:15:00.435Z,1422652500.435 [NAL9602](INFO): NAL9602 initialized
2015-01-30T21:15:00.446Z,1422652500.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:15:00.866Z,1422652500.866 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:15:00.879Z,1422652500.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:15:01.298Z,1422652501.298 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:15:01.324Z,1422652501.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 2 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:15:01.739Z,1422652501.739 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:15:01.868Z,1422652501.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 3 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:15:02.269Z,1422652502.269 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:15:02.299Z,1422652502.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 4 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:15:02.718Z,1422652502.718 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:15:02.732Z,1422652502.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 5 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:15:03.142Z,1422652503.142 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:15:03.554Z,1422652503.554 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:15:04.031Z,1422652504.031 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:15:04.459Z,1422652504.459 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:15:04.888Z,1422652504.888 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:15:05.369Z,1422652505.369 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:15:05.821Z,1422652505.821 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:15:06.280Z,1422652506.280 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:15:06.711Z,1422652506.711 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:15:07.188Z,1422652507.188 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:15:07.608Z,1422652507.608 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:15:08.101Z,1422652508.101 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:15:08.537Z,1422652508.537 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:15:08.970Z,1422652508.970 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:15:09.396Z,1422652509.396 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:15:09.860Z,1422652509.860 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:15:10.288Z,1422652510.288 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:15:10.737Z,1422652510.737 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:15:11.154Z,1422652511.154 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:15:11.602Z,1422652511.602 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:15:12.036Z,1422652512.036 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:15:12.472Z,1422652512.472 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:15:12.904Z,1422652512.904 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:15:13.378Z,1422652513.378 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:15:13.810Z,1422652513.810 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:15:14.267Z,1422652514.267 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:15:14.696Z,1422652514.696 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:15:15.140Z,1422652515.140 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:15:15.573Z,1422652515.573 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:15:15.615Z,1422652515.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:15:16.025Z,1422652516.025 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:15:16.039Z,1422652516.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:15:16.462Z,1422652516.462 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:15:16.915Z,1422652516.915 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:15:17.331Z,1422652517.331 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:15:17.788Z,1422652517.788 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:15:18.229Z,1422652518.229 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:15:18.276Z,1422652518.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:15:18.673Z,1422652518.673 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:15:18.714Z,1422652518.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:15:19.114Z,1422652519.114 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:15:19.562Z,1422652519.562 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:15:19.983Z,1422652519.983 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:15:20.479Z,1422652520.479 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:15:20.910Z,1422652520.910 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:15:21.373Z,1422652521.373 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:15:21.785Z,1422652521.785 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:15:22.267Z,1422652522.267 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:15:22.727Z,1422652522.727 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:15:23.197Z,1422652523.197 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:15:23.633Z,1422652523.633 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:15:24.102Z,1422652524.102 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:15:24.527Z,1422652524.527 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:15:24.588Z,1422652524.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:15:25.007Z,1422652525.007 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:15:25.021Z,1422652525.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:15:25.432Z,1422652525.432 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:15:25.889Z,1422652525.889 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:15:26.314Z,1422652526.314 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:15:26.750Z,1422652526.750 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:15:27.179Z,1422652527.179 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:15:27.639Z,1422652527.639 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:15:28.088Z,1422652528.088 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:15:28.537Z,1422652528.537 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:15:28.968Z,1422652528.968 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:15:29.402Z,1422652529.402 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:15:29.847Z,1422652529.847 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:15:30.288Z,1422652530.288 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:15:30.717Z,1422652530.717 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:15:31.177Z,1422652531.177 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:15:31.598Z,1422652531.598 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:15:32.074Z,1422652532.074 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:15:32.503Z,1422652532.503 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:15:32.944Z,1422652532.944 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:15:33.376Z,1422652533.376 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:15:33.826Z,1422652533.826 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:15:34.250Z,1422652534.250 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:15:34.738Z,1422652534.738 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:15:35.170Z,1422652535.170 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:15:35.222Z,1422652535.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:15:35.632Z,1422652535.632 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:15:35.670Z,1422652535.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:15:36.076Z,1422652536.076 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:15:36.562Z,1422652536.562 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:15:37.014Z,1422652537.014 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:15:37.502Z,1422652537.502 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:15:37.951Z,1422652537.951 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:15:38.396Z,1422652538.396 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:15:38.821Z,1422652538.821 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:15:39.269Z,1422652539.269 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:15:39.694Z,1422652539.694 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:15:39.726Z,1422652539.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:15:40.130Z,1422652540.130 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:15:40.154Z,1422652540.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:15:40.557Z,1422652540.557 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:15:41.044Z,1422652541.044 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:15:41.469Z,1422652541.469 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:15:41.913Z,1422652541.913 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:15:42.331Z,1422652542.331 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:15:42.775Z,1422652542.775 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:15:43.218Z,1422652543.218 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:15:43.668Z,1422652543.668 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:15:44.117Z,1422652544.117 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:15:44.560Z,1422652544.560 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:15:44.979Z,1422652544.979 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:15:45.419Z,1422652545.419 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:15:45.852Z,1422652545.852 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:15:45.930Z,1422652545.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:15:49.207Z,1422652549.207 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:15:49.221Z,1422652549.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:15:49.637Z,1422652549.637 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:15:50.118Z,1422652550.118 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:15:50.547Z,1422652550.547 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:15:51.039Z,1422652551.039 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:15:51.509Z,1422652551.509 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:15:51.958Z,1422652551.958 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:15:52.422Z,1422652552.422 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:15:52.919Z,1422652552.919 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:15:53.335Z,1422652553.335 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:15:53.780Z,1422652553.780 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:15:54.217Z,1422652554.217 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:15:54.657Z,1422652554.657 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:15:55.074Z,1422652555.074 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:15:55.519Z,1422652555.519 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:15:55.935Z,1422652555.935 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:15:56.380Z,1422652556.380 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:15:56.813Z,1422652556.813 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:15:57.245Z,1422652557.245 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:15:57.690Z,1422652557.690 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:15:58.131Z,1422652558.131 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:15:58.547Z,1422652558.547 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:15:58.996Z,1422652558.996 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:15:59.429Z,1422652559.429 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:15:59.881Z,1422652559.881 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:16:00.310Z,1422652560.310 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:16:00.760Z,1422652560.760 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:16:01.175Z,1422652561.175 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:16:01.632Z,1422652561.632 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:16:02.077Z,1422652562.077 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:16:02.525Z,1422652562.525 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:16:02.946Z,1422652562.946 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:16:02.989Z,1422652562.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:16:03.391Z,1422652563.391 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:16:03.446Z,1422652563.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:16:03.855Z,1422652563.855 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:16:04.316Z,1422652564.316 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:16:04.741Z,1422652564.741 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:16:04.832Z,1422652564.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:16:05.230Z,1422652565.230 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:16:05.243Z,1422652565.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:16:05.658Z,1422652565.658 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:16:06.103Z,1422652566.103 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:16:06.600Z,1422652566.600 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:16:06.647Z,1422652566.647 [NAL9602](INFO): SBD MO Status=2, MOMSN=47160, MT Status=2, MTMSN=0
2015-01-30T21:16:06.648Z,1422652566.648 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2015-01-30T21:16:06.660Z,1422652566.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:16:07.056Z,1422652567.056 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:16:07.103Z,1422652567.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:16:07.505Z,1422652567.505 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:16:07.994Z,1422652567.994 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:16:08.418Z,1422652568.418 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:16:08.871Z,1422652568.871 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:16:09.300Z,1422652569.300 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:16:09.758Z,1422652569.758 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:16:10.173Z,1422652570.173 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:16:10.602Z,1422652570.602 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:16:11.038Z,1422652571.038 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:16:11.492Z,1422652571.492 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:16:11.912Z,1422652571.912 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:16:11.962Z,1422652571.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:16:12.360Z,1422652572.360 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:16:12.374Z,1422652572.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:16:12.786Z,1422652572.786 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:16:12.797Z,1422652572.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 2 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:16:13.202Z,1422652573.202 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:16:13.262Z,1422652573.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 3 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:16:13.663Z,1422652573.663 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:16:13.681Z,1422652573.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 4 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:16:14.096Z,1422652574.096 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:16:14.126Z,1422652574.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 5 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:16:14.528Z,1422652574.528 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:16:14.968Z,1422652574.968 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:16:15.402Z,1422652575.402 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:16:15.838Z,1422652575.838 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:16:16.266Z,1422652576.266 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:16:16.716Z,1422652576.716 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:16:17.144Z,1422652577.144 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:16:17.184Z,1422652577.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:16:17.605Z,1422652577.605 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:16:17.619Z,1422652577.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:16:18.033Z,1422652578.033 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:16:18.503Z,1422652578.503 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:16:18.939Z,1422652578.939 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:16:19.384Z,1422652579.384 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:16:19.395Z,1422652579.395 [BPC1](FAULT): B bank: No match for serial number:5911 was found in the onboard configuration.
2015-01-30T21:16:19.395Z,1422652579.395 [BPC1](FAULT): Failed to parse bank B battery data
2015-01-30T21:16:19.395Z,1422652579.395 [BPC1] Data Fault, FailCount= 1
2015-01-30T21:16:19.395Z,1422652579.395 [BPC1](ERROR): Data Fault
2015-01-30T21:16:19.450Z,1422652579.450 [CBIT](ERROR): Data Fault in component: BPC1
2015-01-30T21:16:19.828Z,1422652579.828 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:16:20.273Z,1422652580.273 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:16:20.698Z,1422652580.698 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:16:20.754Z,1422652580.754 [CBIT](INFO): Clearing failed state for component BPC1
2015-01-30T21:16:20.754Z,1422652580.754 [BPC1] No Fault, FailCount= 1
2015-01-30T21:16:21.141Z,1422652581.141 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:16:21.635Z,1422652581.635 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:16:22.108Z,1422652582.108 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:16:22.536Z,1422652582.536 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:16:23.025Z,1422652583.025 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:16:23.442Z,1422652583.442 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:16:23.879Z,1422652583.879 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:16:24.359Z,1422652584.359 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:16:24.796Z,1422652584.796 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:16:24.845Z,1422652584.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:16:25.244Z,1422652585.244 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:16:25.258Z,1422652585.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:16:25.677Z,1422652585.677 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:16:25.699Z,1422652585.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 2 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:16:26.123Z,1422652586.123 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:16:26.575Z,1422652586.575 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:16:26.995Z,1422652586.995 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:16:27.424Z,1422652587.424 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:16:27.457Z,1422652587.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:16:27.865Z,1422652587.865 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:16:27.889Z,1422652587.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:16:28.296Z,1422652588.296 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:16:28.314Z,1422652588.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 2 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:16:28.718Z,1422652588.718 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:16:29.163Z,1422652589.163 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:16:29.604Z,1422652589.604 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:16:30.032Z,1422652590.032 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:16:30.481Z,1422652590.481 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:16:30.907Z,1422652590.907 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:16:30.950Z,1422652590.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:16:31.360Z,1422652591.360 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:16:31.388Z,1422652591.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:16:31.793Z,1422652591.793 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:16:31.844Z,1422652591.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 2 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:16:32.243Z,1422652592.243 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:16:32.307Z,1422652592.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 3 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:16:32.706Z,1422652592.706 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:16:33.181Z,1422652593.181 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:16:33.613Z,1422652593.613 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:16:34.051Z,1422652594.051 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:16:34.511Z,1422652594.511 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:16:34.931Z,1422652594.931 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:16:35.420Z,1422652595.420 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:16:35.864Z,1422652595.864 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:16:36.326Z,1422652596.326 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:16:36.783Z,1422652596.783 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:16:37.219Z,1422652597.219 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:16:37.664Z,1422652597.664 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:16:38.101Z,1422652598.101 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:16:38.534Z,1422652598.534 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:16:38.982Z,1422652598.982 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:16:39.423Z,1422652599.423 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:16:39.430Z,1422652599.430 [DVL_micro](ERROR): DVL Failure: Failed to read in all data items. Got 35 of 46
2015-01-30T21:16:39.430Z,1422652599.430 [DVL_micro](ERROR): Failed to parse DVL response:$#NQ.RES 0X0000 1 0 1 1 49.0 0 52.0 52.1 -818.1 0 781.1 13.5 -897 -3 839 -6 10 12 9 8 -2134.4 -85.4 -20.0 1 174.8 2128.0 -67.4 1 -2316 4 -18 2 302 225
2015-01-30T21:16:39.444Z,1422652599.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:16:39.856Z,1422652599.856 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:16:39.869Z,1422652599.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:16:40.276Z,1422652600.276 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:16:40.287Z,1422652600.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 2 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:16:40.693Z,1422652600.693 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:16:41.137Z,1422652601.137 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:16:41.566Z,1422652601.566 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:16:42.015Z,1422652602.015 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:16:42.451Z,1422652602.451 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:16:42.888Z,1422652602.888 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:16:43.321Z,1422652603.321 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:16:43.354Z,1422652603.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:16:43.771Z,1422652603.771 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:16:43.785Z,1422652603.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:16:44.194Z,1422652604.194 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:16:44.231Z,1422652604.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 2 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:16:44.635Z,1422652604.635 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:16:45.080Z,1422652605.080 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:16:45.500Z,1422652605.500 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:16:45.549Z,1422652605.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:16:45.957Z,1422652605.957 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:16:45.970Z,1422652605.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:16:49.207Z,1422652609.207 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:16:49.706Z,1422652609.706 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:16:50.185Z,1422652610.185 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:16:50.648Z,1422652610.648 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:16:51.104Z,1422652611.104 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:16:51.553Z,1422652611.553 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:16:52.006Z,1422652612.006 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:16:52.487Z,1422652612.487 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:16:52.908Z,1422652612.908 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:16:52.949Z,1422652612.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:16:53.401Z,1422652613.401 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:16:53.421Z,1422652613.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:16:53.833Z,1422652613.833 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:16:53.845Z,1422652613.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 2 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:16:54.250Z,1422652614.250 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:16:54.305Z,1422652614.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 3 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:16:54.705Z,1422652614.705 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:16:54.718Z,1422652614.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 4 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:16:55.123Z,1422652615.123 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:16:55.134Z,1422652615.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 5 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:16:55.540Z,1422652615.540 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:16:55.983Z,1422652615.983 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:16:56.405Z,1422652616.405 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:16:56.842Z,1422652616.842 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:16:57.265Z,1422652617.265 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:16:57.711Z,1422652617.711 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:16:58.132Z,1422652618.132 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:16:58.186Z,1422652618.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:16:58.592Z,1422652618.592 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:16:58.631Z,1422652618.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:16:59.033Z,1422652619.033 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:16:59.482Z,1422652619.482 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:16:59.915Z,1422652619.915 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:17:00.347Z,1422652620.347 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:17:00.772Z,1422652620.772 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:17:01.208Z,1422652621.208 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:17:01.645Z,1422652621.645 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:17:02.098Z,1422652622.098 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:17:02.523Z,1422652622.523 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:17:02.972Z,1422652622.972 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:17:03.426Z,1422652623.426 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:17:03.864Z,1422652623.864 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:17:04.297Z,1422652624.297 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:17:04.770Z,1422652624.770 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:17:05.194Z,1422652625.194 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:17:05.647Z,1422652625.647 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:17:06.096Z,1422652626.096 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:17:06.585Z,1422652626.585 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:17:07.049Z,1422652627.049 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:17:07.531Z,1422652627.531 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:17:07.971Z,1422652627.971 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:17:08.428Z,1422652628.428 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:17:08.844Z,1422652628.844 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:17:09.296Z,1422652629.296 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:17:09.721Z,1422652629.721 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:17:10.190Z,1422652630.190 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:17:10.618Z,1422652630.618 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:17:11.072Z,1422652631.072 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:17:11.521Z,1422652631.521 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:17:11.956Z,1422652631.956 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:17:12.374Z,1422652632.374 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:17:12.826Z,1422652632.826 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:17:13.250Z,1422652633.250 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:17:13.692Z,1422652633.692 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:17:14.112Z,1422652634.112 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:17:14.559Z,1422652634.559 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:17:14.990Z,1422652634.990 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:17:15.430Z,1422652635.430 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:17:15.859Z,1422652635.859 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:17:16.312Z,1422652636.312 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:17:16.736Z,1422652636.736 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:17:17.181Z,1422652637.181 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:17:17.606Z,1422652637.606 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:17:18.051Z,1422652638.051 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:17:18.496Z,1422652638.496 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:17:18.936Z,1422652638.936 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:17:19.359Z,1422652639.359 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:17:19.817Z,1422652639.817 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:17:20.246Z,1422652640.246 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:17:20.719Z,1422652640.719 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:17:21.152Z,1422652641.152 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:17:21.632Z,1422652641.632 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:17:22.073Z,1422652642.073 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:17:22.517Z,1422652642.517 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:17:22.954Z,1422652642.954 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:17:23.419Z,1422652643.419 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:17:23.839Z,1422652643.839 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:17:24.288Z,1422652644.288 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:17:24.713Z,1422652644.713 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:17:25.152Z,1422652645.152 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:17:25.566Z,1422652645.566 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:17:25.609Z,1422652645.609 [NAL9602](INFO): SBD MO Status=2, MOMSN=47160, MT Status=2, MTMSN=0
2015-01-30T21:17:25.609Z,1422652645.609 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2015-01-30T21:17:26.031Z,1422652646.031 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:17:26.454Z,1422652646.454 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:17:26.905Z,1422652646.905 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:17:27.321Z,1422652647.321 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:17:27.797Z,1422652647.797 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:17:28.226Z,1422652648.226 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:17:28.675Z,1422652648.675 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:17:29.100Z,1422652649.100 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:17:29.548Z,1422652649.548 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:17:29.982Z,1422652649.982 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:17:30.038Z,1422652650.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:17:30.454Z,1422652650.454 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:17:30.469Z,1422652650.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:17:30.871Z,1422652650.871 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:17:31.320Z,1422652651.320 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:17:31.736Z,1422652651.736 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:17:32.192Z,1422652652.192 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:17:32.618Z,1422652652.618 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:17:33.090Z,1422652653.090 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:17:33.511Z,1422652653.511 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:17:33.991Z,1422652653.991 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:17:34.416Z,1422652654.416 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:17:34.888Z,1422652654.888 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:17:35.309Z,1422652655.309 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:17:35.782Z,1422652655.782 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:17:36.242Z,1422652656.242 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:17:36.275Z,1422652656.275 [NAL9602](INFO): SBD MO Status=0, MOMSN=47160, MT Status=0, MTMSN=0
2015-01-30T21:17:36.276Z,1422652656.276 [NAL9602](ERROR): Buffer populated but no message sent from NAL9602. Error code: 0
2015-01-30T21:17:36.688Z,1422652656.688 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:17:37.104Z,1422652657.104 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:17:37.548Z,1422652657.548 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:17:37.974Z,1422652657.974 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:17:38.405Z,1422652658.405 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:17:38.834Z,1422652658.834 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:17:39.280Z,1422652659.280 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:17:39.693Z,1422652659.693 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:17:40.148Z,1422652660.148 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:17:40.582Z,1422652660.582 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:17:41.037Z,1422652661.037 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:17:41.459Z,1422652661.459 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:17:41.940Z,1422652661.940 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:17:42.400Z,1422652662.400 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:17:42.853Z,1422652662.853 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:17:43.282Z,1422652663.282 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:17:43.718Z,1422652663.718 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:17:44.139Z,1422652664.139 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:17:44.601Z,1422652664.601 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:17:45.020Z,1422652665.020 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:17:45.477Z,1422652665.477 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:17:45.906Z,1422652665.906 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:17:46.346Z,1422652666.346 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:17:46.812Z,1422652666.812 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:17:46.845Z,1422652666.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:17:50.057Z,1422652670.057 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:17:50.124Z,1422652670.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:17:50.524Z,1422652670.524 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:17:51.006Z,1422652671.006 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:17:51.427Z,1422652671.427 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:17:51.879Z,1422652671.879 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:17:52.311Z,1422652672.311 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:17:52.781Z,1422652672.781 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:17:53.204Z,1422652673.204 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:17:53.682Z,1422652673.682 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:17:54.142Z,1422652674.142 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:17:54.603Z,1422652674.603 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:17:55.044Z,1422652675.044 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:17:55.513Z,1422652675.513 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:17:55.933Z,1422652675.933 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:17:56.382Z,1422652676.382 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:17:56.808Z,1422652676.808 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:17:57.243Z,1422652677.243 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:17:57.676Z,1422652677.676 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:17:58.129Z,1422652678.129 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:17:58.565Z,1422652678.565 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:17:59.026Z,1422652679.026 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:17:59.451Z,1422652679.451 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:17:59.910Z,1422652679.910 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:18:00.340Z,1422652680.340 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:18:00.797Z,1422652680.797 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:18:01.213Z,1422652681.213 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:18:01.254Z,1422652681.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:18:01.666Z,1422652681.666 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:18:01.687Z,1422652681.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:18:02.095Z,1422652682.095 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:18:02.567Z,1422652682.567 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:18:03.004Z,1422652683.004 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:18:03.453Z,1422652683.453 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:18:03.874Z,1422652683.874 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:18:03.907Z,1422652683.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:18:04.318Z,1422652684.318 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:18:04.369Z,1422652684.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:18:04.779Z,1422652684.779 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:18:05.219Z,1422652685.219 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:18:05.656Z,1422652685.656 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:18:06.109Z,1422652686.109 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:18:06.549Z,1422652686.549 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:18:07.010Z,1422652687.010 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:18:07.014Z,1422652687.014 [NAL9602](INFO): SBD MO Status=0, MOMSN=47161, MT Status=0, MTMSN=0
2015-01-30T21:18:07.015Z,1422652687.015 [NAL9602](ERROR): Buffer populated but no message sent from NAL9602. Error code: 0
2015-01-30T21:18:07.484Z,1422652687.484 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:18:07.914Z,1422652687.914 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:18:08.389Z,1422652688.389 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:18:08.869Z,1422652688.869 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:18:09.294Z,1422652689.294 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:18:09.726Z,1422652689.726 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:18:10.151Z,1422652690.151 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:18:10.592Z,1422652690.592 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:18:11.021Z,1422652691.021 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:18:11.505Z,1422652691.505 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:18:11.942Z,1422652691.942 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:18:12.375Z,1422652692.375 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:18:12.811Z,1422652692.811 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:18:13.272Z,1422652693.272 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:18:13.693Z,1422652693.693 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:18:13.729Z,1422652693.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:18:14.151Z,1422652694.151 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:18:14.220Z,1422652694.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:18:14.621Z,1422652694.621 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:18:15.099Z,1422652695.099 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:18:15.532Z,1422652695.532 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:18:16.008Z,1422652696.008 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:18:16.437Z,1422652696.437 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:18:16.870Z,1422652696.870 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:18:17.299Z,1422652697.299 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:18:17.331Z,1422652697.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:18:17.739Z,1422652697.739 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:18:17.769Z,1422652697.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:18:18.172Z,1422652698.172 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:18:18.184Z,1422652698.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 2 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:18:18.603Z,1422652698.603 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:18:19.033Z,1422652699.033 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:18:19.458Z,1422652699.458 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:18:19.907Z,1422652699.907 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:18:20.323Z,1422652700.323 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:18:20.812Z,1422652700.812 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:18:21.248Z,1422652701.248 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:18:21.323Z,1422652701.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:18:21.729Z,1422652701.729 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:18:21.742Z,1422652701.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:18:22.154Z,1422652702.154 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:18:22.647Z,1422652702.647 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:18:23.103Z,1422652703.103 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:18:23.552Z,1422652703.552 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:18:23.977Z,1422652703.977 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:18:24.030Z,1422652704.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:18:24.437Z,1422652704.437 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:18:24.451Z,1422652704.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:18:24.866Z,1422652704.866 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:18:25.299Z,1422652705.299 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:18:25.731Z,1422652705.731 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:18:26.196Z,1422652706.196 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:18:26.625Z,1422652706.625 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:18:27.062Z,1422652707.062 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:18:27.527Z,1422652707.527 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:18:27.967Z,1422652707.967 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:18:27.971Z,1422652707.971 [NAL9602](INFO): SBD MO Status=0, MOMSN=47162, MT Status=0, MTMSN=0
2015-01-30T21:18:27.971Z,1422652707.971 [NAL9602](ERROR): Buffer populated but no message sent from NAL9602. Error code: 0
2015-01-30T21:18:28.407Z,1422652708.407 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:18:28.860Z,1422652708.860 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:18:29.277Z,1422652709.277 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:18:29.714Z,1422652709.714 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:18:30.150Z,1422652710.150 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:18:30.610Z,1422652710.610 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:18:31.052Z,1422652711.052 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:18:31.509Z,1422652711.509 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:18:31.941Z,1422652711.941 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:18:32.386Z,1422652712.386 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:18:32.823Z,1422652712.823 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:18:33.279Z,1422652713.279 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:18:33.704Z,1422652713.704 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:18:34.169Z,1422652714.169 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:18:34.593Z,1422652714.593 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:18:35.038Z,1422652715.038 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:18:35.491Z,1422652715.491 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:18:35.927Z,1422652715.927 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:18:36.348Z,1422652716.348 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:18:36.794Z,1422652716.794 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:18:37.210Z,1422652717.210 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:18:37.662Z,1422652717.662 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:18:37.666Z,1422652717.666 [NAL9602](INFO): SBD MO Status=0, MOMSN=47163, MT Status=0, MTMSN=0
2015-01-30T21:18:37.666Z,1422652717.666 [NAL9602](ERROR): Buffer populated but no message sent from NAL9602. Error code: 0
2015-01-30T21:18:38.095Z,1422652718.095 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:18:38.121Z,1422652718.121 [BPC1](FAULT): Failed to receive battery data
2015-01-30T21:18:38.121Z,1422652718.121 [BPC1] Communications Fault, FailCount= 1
2015-01-30T21:18:38.121Z,1422652718.121 [BPC1](ERROR): Communications Fault
2015-01-30T21:18:38.182Z,1422652718.182 [CBIT](ERROR): Communications Fault in component: BPC1
2015-01-30T21:18:38.539Z,1422652718.539 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:18:38.972Z,1422652718.972 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:18:39.421Z,1422652719.421 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:18:39.476Z,1422652719.476 [CBIT](INFO): Clearing failed state for component BPC1
2015-01-30T21:18:39.476Z,1422652719.476 [BPC1] No Fault, FailCount= 1
2015-01-30T21:18:39.837Z,1422652719.837 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:18:40.334Z,1422652720.334 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:18:40.383Z,1422652720.383 [Default:CheckIn:Read_GPS](INFO): Timed out from 2015-01-30T21:13:40.0Z
2015-01-30T21:18:40.383Z,1422652720.383 [Default:CheckIn:Read_GPS] Stopped
2015-01-30T21:18:40.383Z,1422652720.383 [Default:CheckIn:Read_Iridium] Running Loop=1
2015-01-30T21:18:40.773Z,1422652720.773 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:18:41.424Z,1422652721.424 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:18:41.857Z,1422652721.857 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:18:41.889Z,1422652721.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:18:42.309Z,1422652722.309 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:18:42.334Z,1422652722.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:18:42.729Z,1422652722.729 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:18:43.198Z,1422652723.198 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:18:43.635Z,1422652723.635 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:18:43.696Z,1422652723.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:18:44.095Z,1422652724.095 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:18:44.108Z,1422652724.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:18:44.512Z,1422652724.512 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:18:44.945Z,1422652724.945 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:18:45.359Z,1422652725.359 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:18:45.810Z,1422652725.810 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:18:46.263Z,1422652726.263 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:18:46.720Z,1422652726.720 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:18:47.141Z,1422652727.141 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:18:47.605Z,1422652727.605 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:18:48.034Z,1422652728.034 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:18:48.067Z,1422652728.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:18:48.491Z,1422652728.491 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:18:48.505Z,1422652728.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:18:48.907Z,1422652728.907 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:18:48.919Z,1422652728.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 2 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:18:49.320Z,1422652729.320 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:18:49.366Z,1422652729.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 3 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:18:49.781Z,1422652729.781 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:18:49.803Z,1422652729.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 4 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:18:50.205Z,1422652730.205 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:18:50.276Z,1422652730.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 5 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:18:50.694Z,1422652730.694 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:18:51.111Z,1422652731.111 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:18:51.599Z,1422652731.599 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:18:52.020Z,1422652732.020 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:18:52.119Z,1422652732.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:18:52.509Z,1422652732.509 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:18:52.522Z,1422652732.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:18:52.926Z,1422652732.926 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:18:53.028Z,1422652733.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 2 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:18:53.418Z,1422652733.418 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:18:53.469Z,1422652733.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 3 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:18:53.875Z,1422652733.875 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:18:54.328Z,1422652734.328 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:18:54.765Z,1422652734.765 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:18:54.798Z,1422652734.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:18:55.213Z,1422652735.213 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:18:55.227Z,1422652735.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:18:55.634Z,1422652735.634 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:18:55.687Z,1422652735.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 2 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:18:56.085Z,1422652736.085 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:18:56.099Z,1422652736.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 3 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:18:56.503Z,1422652736.503 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:18:56.545Z,1422652736.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 4 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:18:56.958Z,1422652736.958 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:18:56.980Z,1422652736.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 5 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:18:57.379Z,1422652737.379 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:18:57.382Z,1422652737.382 [NAL9602](INFO): SBD MO Status=0, MOMSN=47164, MT Status=0, MTMSN=0
2015-01-30T21:18:57.382Z,1422652737.382 [NAL9602](ERROR): Buffer populated but no message sent from NAL9602. Error code: 0
2015-01-30T21:18:57.809Z,1422652737.809 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:18:58.234Z,1422652738.234 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:18:58.650Z,1422652738.650 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:18:59.119Z,1422652739.119 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:18:59.552Z,1422652739.552 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:18:59.996Z,1422652739.996 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:19:00.413Z,1422652740.413 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:19:00.879Z,1422652740.879 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:19:01.307Z,1422652741.307 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:19:01.747Z,1422652741.747 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:19:02.196Z,1422652742.196 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:19:02.248Z,1422652742.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:19:02.653Z,1422652742.653 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:19:02.683Z,1422652742.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:19:03.081Z,1422652743.081 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:19:03.538Z,1422652743.538 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:19:03.963Z,1422652743.963 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:19:04.411Z,1422652744.411 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:19:04.872Z,1422652744.872 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:19:05.317Z,1422652745.317 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:19:05.754Z,1422652745.754 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:19:06.226Z,1422652746.226 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:19:06.659Z,1422652746.659 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:19:06.751Z,1422652746.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:19:07.164Z,1422652747.164 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:19:07.177Z,1422652747.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:19:07.589Z,1422652747.589 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:19:07.672Z,1422652747.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 2 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:19:08.081Z,1422652748.081 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:19:08.142Z,1422652748.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 3 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:19:08.546Z,1422652748.546 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:19:08.560Z,1422652748.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 4 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:19:08.970Z,1422652748.970 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:19:09.415Z,1422652749.415 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:19:09.844Z,1422652749.844 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:19:09.877Z,1422652749.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:19:10.297Z,1422652750.297 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:19:10.311Z,1422652750.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:19:10.730Z,1422652750.730 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:19:10.756Z,1422652750.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 2 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:19:11.154Z,1422652751.154 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:19:11.591Z,1422652751.591 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2015-01-30T21:19:11.608Z,1422652751.608 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:19:12.035Z,1422652752.035 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:19:12.484Z,1422652752.484 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:19:12.488Z,1422652752.488 [NAL9602](INFO): SBD MO Status=2, MOMSN=47165, MT Status=2, MTMSN=0
2015-01-30T21:19:12.488Z,1422652752.488 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2015-01-30T21:19:12.924Z,1422652752.924 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:19:13.381Z,1422652753.381 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:19:13.384Z,1422652753.384 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2015-01-30T21:19:13.807Z,1422652753.807 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:19:14.238Z,1422652754.238 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:19:14.660Z,1422652754.660 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:19:15.118Z,1422652755.118 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:19:18.409Z,1422652758.409 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:19:18.878Z,1422652758.878 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:19:18.880Z,1422652758.880 [NAL9602](INFO): Powering down
2015-01-30T21:19:19.334Z,1422652759.334 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20150130T204932/Courier0016.lzma
2015-01-30T21:19:19.343Z,1422652759.343 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:19:19.816Z,1422652759.816 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:19:20.278Z,1422652760.278 [DataOverHttps](INFO): Moved sent file to Logs/20150130T204932/Courier0016.lzma.bak
2015-01-30T21:19:20.278Z,1422652760.278 [DataOverHttps](INFO): SBD MOMSN=1514171
2015-01-30T21:19:20.288Z,1422652760.288 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:19:20.769Z,1422652760.769 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:19:21.222Z,1422652761.222 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:19:21.671Z,1422652761.671 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:19:22.123Z,1422652762.123 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:19:25.398Z,1422652765.398 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:19:25.824Z,1422652765.824 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:19:26.266Z,1422652766.266 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:19:26.680Z,1422652766.680 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:19:27.123Z,1422652767.123 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:19:27.548Z,1422652767.548 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:19:30.816Z,1422652770.816 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:19:31.253Z,1422652771.253 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:19:31.710Z,1422652771.710 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:19:32.143Z,1422652772.143 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:19:32.587Z,1422652772.587 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:19:33.004Z,1422652773.004 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:19:33.485Z,1422652773.485 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:19:33.494Z,1422652773.494 [BPC1](ERROR): A bank expecting battery number:1 and read number: uart read:X
$S,01,6BDE,02,00,04,64%23
$C1,01,7F,02,00,03,7F,04,00,05,00,06,00,07,00%72
$B11,0A,FFFC%36
$B12,0A,FFFD%32
$B13,0A,FFFB%35
$B14,0A,FFFD%34
$B15,0A,0000%37
$B16,0A,0000%34
$B17,0A,FFAB%36
$S,01,6F46,02,00,04,64%24
$C1,01,7F,02,00,03,7F,04,00,05,00,06,00,07,00%72
$B11,02,000A,01,02A8,03,0001,08,0B88,09,4127,0A,FFFC,0B,FFFC%39
$B11,0C,0001,0D,0064,0E,005F,0F,1927,10,192C,11,FFFF,12,FFFF%40
$B11,13,FFFF,14,0000,15,41A0,16,00E0,17,0001,18,1A90,19,3840%37
$B11,1A,0031,1B,458B,1C,0091%42
$B12,02,000A,01,02A8,03,0001,08,0B86,09,411F,0A,FFFC,0B,FFFD%41
$B12,0C,0001,0D,0064,0E,0060,0F,193D,10,1940,11,FFFF,12,FFFF%31
$B12,13,FFFF,14,0000,15,41A0,16,00E0,17,0001,18,1A90,19,3840%34
$B12,1A,0031,1B,458F,1C,0153%4A
$B13,02,000A,01,02A8,03,0001,08,0B7E,09,4129,0A,FFFB,0B,FFFB%47
$B13,0C,0001,0D,0064,0E,005E,0F,18F2,10,18F7,11,FFFF,12,FFFF%30
$B13,13,FFFF,14,0000,15,41A0,16,00E0,17,0001,18,1A90,19,3840%35
$B13,1A,0031,1B,458B,1C,00AF%4F
$B14,02,000A,01,02A8,03,0001,08,0B7B,09,4123,0A,FFFD,0B,FFFF%4F
$B14,0C,0001,0D,0064,0E,0060,0F,1975,10,1975,11,FFFF,12,FFFF%44
$B14,13,FFFF,14,0000,15,41A0,16,00E0,17,0001,18,1A90,19,3840%32
$B14,1A,0031,1B,458F,1C,0151%4E
$B15,02,000A,01,02A8,03,0001,08,0B8C,09,40EC,0A,0000,0B,0000%44
$B15,0C,0001,0D,0064,0E,0062,0F,19CE,10,19CE,11,FFFF,12,FFFF%47
$B15,13,FFFF,14,0000,15,41A0,16,00E0,17,0001,18,1A90,19,3840%33
$B15,1A,0031,1B,458C,1C,00DC%48
$B16,02,000A,01,02A8,03,0001,08,0B75,09,40EC,0A,0000,0B,0000%3E
$B16,0C,0001,0D,0064,0E,0060,0F,194A,10,194A,11,FFFF,12,FFFF%46
$B16,13,FFFF,14,0000,15,41A0,16,00E0,17,0001,18,1A90,19,3840%30
$B16,1A,0031,1B,458B,1C,00BA%4E
$B17,02,000A,01,02A8,03,0001,08,0B71,09,4066,0A,FFBA,0B,FFAC%3C
$B17,0C,0001,0D,0062,0E,005C,0F,184D,10,18ED,11,14D4,12,115C%43
$B17,13,FFFF,14,0000,15,41A0,16,00E0,17,0001,18,1A90,19,3840%31
$B17,1A,0031,1B,458C,1C,00DA%48
458B,1C,008E%31
$B18,02,000A,01,02A8,03,0001,08,0B7F,09,4052,0A,FFA6,0B,FF9D%48
$B18,0C,0001,0D,0062,0E,005F,0F,192F,10,19F6,11,10CA,12,0F43%4D
$B18,13,FFFF,14,0000,15,41A0,16,00E0,17,0001,18,1A90,19,3840%3E
$B18,1A,0031,1B,458B,1C,00AC%41

2015-01-30T21:19:33.494Z,1422652773.494 [BPC1](FAULT): Failed to parse bank A battery data
2015-01-30T21:19:33.494Z,1422652773.494 [BPC1] Data Fault, FailCount= 1
2015-01-30T21:19:33.494Z,1422652773.494 [BPC1](ERROR): Data Fault
2015-01-30T21:19:33.516Z,1422652773.516 [CBIT](ERROR): Data Fault in component: BPC1
2015-01-30T21:19:33.945Z,1422652773.945 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:19:34.390Z,1422652774.390 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:19:34.815Z,1422652774.815 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:19:34.877Z,1422652774.877 [CBIT](INFO): Clearing failed state for component BPC1
2015-01-30T21:19:34.877Z,1422652774.877 [BPC1] No Fault, FailCount= 1
2015-01-30T21:19:35.271Z,1422652775.271 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:19:35.729Z,1422652775.729 [DataOverHttps](INFO): Sending 588 bytes from file Logs/20150130T204932/Express0017.lzma
2015-01-30T21:19:35.740Z,1422652775.740 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:19:36.281Z,1422652776.281 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:19:36.698Z,1422652776.698 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:19:37.136Z,1422652777.136 [DataOverHttps](INFO): Moved sent file to Logs/20150130T204932/Express0017.lzma.bak
2015-01-30T21:19:37.136Z,1422652777.136 [DataOverHttps](INFO): SBD MOMSN=1514173
2015-01-30T21:19:37.146Z,1422652777.146 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:19:37.595Z,1422652777.595 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:19:37.648Z,1422652777.648 [Default:CheckIn:Read_Iridium] Stopped
2015-01-30T21:19:37.648Z,1422652777.648 [Default:CheckIn](INFO): Completed Default:CheckIn
2015-01-30T21:19:37.648Z,1422652777.648 [Default:CheckIn] Stopped
2015-01-30T21:19:37.648Z,1422652777.648 [Default:CheckIn](INFO): Aggregate::uninitialize Default:CheckIn
2015-01-30T21:19:37.648Z,1422652777.648 [Default:CheckIn:A.SetSpeed] Stopped
2015-01-30T21:19:37.648Z,1422652777.648 [Default:CheckIn:A.SetSpeed](DEBUG): Uninitialize.
2015-01-30T21:19:38.060Z,1422652778.060 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:19:45.825Z,1422652785.825 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:19:48.015Z,1422652788.015 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:19:52.999Z,1422652792.999 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:19:53.046Z,1422652793.046 [Default:UpdateAndReportMinutesSinceMissionStarted] Running Loop=1
2015-01-30T21:19:53.046Z,1422652793.046 [Default:UpdateAndReportMinutesSinceMissionStarted](INFO): Aggregate::initialize Default:UpdateAndReportMinutesSinceMissionStarted
2015-01-30T21:19:53.046Z,1422652793.046 [Default:UpdateAndReportMinutesSinceMissionStarted:A] Running Loop=1
2015-01-30T21:19:53.047Z,1422652793.047 [Default:UpdateAndReportMinutesSinceMissionStarted:A] Stopped
2015-01-30T21:19:53.047Z,1422652793.047 [Default:UpdateAndReportMinutesSinceMissionStarted:B] Running Loop=1
2015-01-30T21:19:58.001Z,1422652798.001 [Depth_Keller](ERROR): Pressure reading out of range: 1355.175415 decibar
2015-01-30T21:19:58.003Z,1422652798.003 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:19:58.048Z,1422652798.048 [Default:UpdateAndReportMinutesSinceMissionStarted:B](IMPORTANT): Default mission has been running for 27.005376 min 
2015-01-30T21:19:58.048Z,1422652798.048 [Default:UpdateAndReportMinutesSinceMissionStarted:B] Stopped
2015-01-30T21:19:58.048Z,1422652798.048 [Default:UpdateAndReportMinutesSinceMissionStarted](INFO): Completed Default:UpdateAndReportMinutesSinceMissionStarted
2015-01-30T21:19:58.049Z,1422652798.049 [Default:UpdateAndReportMinutesSinceMissionStarted] Stopped
2015-01-30T21:19:58.049Z,1422652798.049 [Default:UpdateAndReportMinutesSinceMissionStarted](INFO): Aggregate::uninitialize Default:UpdateAndReportMinutesSinceMissionStarted
2015-01-30T21:19:58.350Z,1422652798.350 [Radio_Surface](INFO): Powering down
2015-01-30T21:20:03.014Z,1422652803.014 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:20:08.002Z,1422652808.002 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:20:08.374Z,1422652808.374 [Radio_Surface](INFO): Powering up
2015-01-30T21:20:13.002Z,1422652813.002 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:20:18.005Z,1422652818.005 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:20:23.004Z,1422652823.004 [Depth_Keller](ERROR): Pressure reading out of range: 1830.675781 decibar
2015-01-30T21:20:23.006Z,1422652823.006 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:20:23.273Z,1422652823.273 [Radio_Surface](INFO): Powering down
2015-01-30T21:20:28.001Z,1422652828.001 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:20:28.089Z,1422652828.089 [Radio_Surface](INFO): Powering up
2015-01-30T21:20:33.005Z,1422652833.005 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:20:38.000Z,1422652838.000 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:20:43.000Z,1422652843.000 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:20:43.041Z,1422652843.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:20:47.000Z,1422652848.000 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:20:48.043Z,1422652848.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:20:52.000Z,1422652853.000 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:20:57.000Z,1422652858.000 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:21:03.003Z,1422652863.003 [Depth_Keller](ERROR): Pressure reading out of range: 1830.687988 decibar
2015-01-30T21:21:03.004Z,1422652863.004 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:21:03.143Z,1422652863.143 [Radio_Surface](INFO): Powering down
2015-01-30T21:21:07.999Z,1422652867.999 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:21:08.025Z,1422652868.025 [BPC1](DEBUG): Received data from all battery sticks
2015-01-30T21:21:08.355Z,1422652868.355 [Radio_Surface](INFO): Powering up
2015-01-30T21:21:12.999Z,1422652872.999 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2015-01-30T21:21:13.007Z,1422652873.007 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:21:13.046Z,1422652873.046 [BPC1](FAULT): Failed to receive battery data
2015-01-30T21:21:13.046Z,1422652873.046 [BPC1] Communications Fault, FailCount= 1
2015-01-30T21:21:13.046Z,1422652873.046 [BPC1](ERROR): Communications Fault
2015-01-30T21:21:13.092Z,1422652873.092 [CBIT](ERROR): Communications Fault in component: BPC1
2015-01-30T21:21:17.994Z,1422652877.994 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:21:23.005Z,1422652883.005 [Depth_Keller](ERROR): Pressure reading out of range: 1830.901001 decibar
2015-01-30T21:21:23.007Z,1422652883.007 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:21:23.246Z,1422652883.246 [Radio_Surface](INFO): Powering down
2015-01-30T21:21:28.002Z,1422652888.002 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:21:28.057Z,1422652888.057 [Radio_Surface](INFO): Powering up
2015-01-30T21:21:28.058Z,1422652888.058 [CBIT](INFO): Clearing failed state for component BPC1
2015-01-30T21:21:28.058Z,1422652888.058 [BPC1] No Fault, FailCount= 1
2015-01-30T21:21:33.002Z,1422652893.002 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:21:38.001Z,1422652898.001 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:21:43.009Z,1422652903.009 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:21:48.001Z,1422652908.001 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:21:52.996Z,1422652912.996 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:21:58.000Z,1422652918.000 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:22:03.000Z,1422652923.000 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:22:08.000Z,1422652928.000 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2015-01-30T21:22:08.008Z,1422652928.008 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:22:12.000Z,1422652933.000 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:22:18.012Z,1422652938.012 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:22:23.003Z,1422652943.003 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:22:27.999Z,1422652947.999 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:22:33.007Z,1422652953.007 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:22:37.997Z,1422652957.997 [Depth_Keller](ERROR): Pressure reading out of range: 1830.661865 decibar
2015-01-30T21:22:37.999Z,1422652957.999 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:22:38.182Z,1422652958.182 [Radio_Surface](INFO): Powering down
2015-01-30T21:22:43.007Z,1422652963.007 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:22:43.394Z,1422652963.394 [Radio_Surface](INFO): Powering up
2015-01-30T21:22:48.001Z,1422652968.001 [Depth_Keller](ERROR): Pressure reading out of range: 1830.705444 decibar
2015-01-30T21:22:48.002Z,1422652968.002 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:22:48.221Z,1422652968.221 [Radio_Surface](INFO): Powering down
2015-01-30T21:22:53.002Z,1422652973.002 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:22:53.037Z,1422652973.037 [Radio_Surface](INFO): Powering up
2015-01-30T21:22:57.994Z,1422652977.994 [DataOverHttps](INFO): setting unavailable, lastComms_.elapsed()=180.002884
2015-01-30T21:22:58.002Z,1422652978.002 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:22:58.066Z,1422652978.066 [Default:CheckIn] Running Loop=1
2015-01-30T21:22:58.066Z,1422652978.066 [Default:CheckIn](INFO): Aggregate::initialize Default:CheckIn
2015-01-30T21:22:58.066Z,1422652978.066 [Default:CheckIn:A.SetSpeed] Running Loop=1
2015-01-30T21:22:58.066Z,1422652978.066 [Default:CheckIn:A.SetSpeed](DEBUG): Initialize.
2015-01-30T21:22:58.066Z,1422652978.066 [Default:CheckIn:Read_GPS] Running Loop=1
2015-01-30T21:22:58.727Z,1422652978.727 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:22:58.755Z,1422652978.755 [NAL9602](INFO): Powering up
2015-01-30T21:22:59.195Z,1422652979.195 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:22:59.700Z,1422652979.700 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:23:00.138Z,1422652980.138 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:23:00.565Z,1422652980.565 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:23:01.005Z,1422652981.005 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:23:01.423Z,1422652981.423 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:23:01.867Z,1422652981.867 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:23:02.292Z,1422652982.292 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:23:02.749Z,1422652982.749 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:23:03.165Z,1422652983.165 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:23:03.619Z,1422652983.619 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:23:04.059Z,1422652984.059 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:23:04.122Z,1422652984.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:23:04.515Z,1422652984.515 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:23:04.528Z,1422652984.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:23:04.933Z,1422652984.933 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:23:05.385Z,1422652985.385 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:23:05.822Z,1422652985.822 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:23:05.865Z,1422652985.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:23:06.270Z,1422652986.270 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:23:06.283Z,1422652986.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:23:06.695Z,1422652986.695 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:23:07.139Z,1422652987.139 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:23:07.573Z,1422652987.573 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:23:08.017Z,1422652988.017 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:23:08.446Z,1422652988.446 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:23:08.882Z,1422652988.882 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:23:09.307Z,1422652989.307 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:23:09.788Z,1422652989.788 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:23:09.798Z,1422652989.798 [NAL9602](INFO): NAL9602 initialized
2015-01-30T21:23:10.245Z,1422652990.245 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:23:10.729Z,1422652990.729 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:23:11.174Z,1422652991.174 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:23:11.253Z,1422652991.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:23:11.652Z,1422652991.652 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:23:11.721Z,1422652991.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:23:12.120Z,1422652992.120 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:23:12.580Z,1422652992.580 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:23:13.045Z,1422652993.045 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:23:13.534Z,1422652993.534 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:23:13.967Z,1422652993.967 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:23:14.411Z,1422652994.411 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:23:14.836Z,1422652994.836 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:23:15.328Z,1422652995.328 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:23:15.746Z,1422652995.746 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:23:16.190Z,1422652996.190 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:23:16.626Z,1422652996.626 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:23:17.067Z,1422652997.067 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:23:17.488Z,1422652997.488 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:23:17.945Z,1422652997.945 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:23:18.365Z,1422652998.365 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:23:18.810Z,1422652998.810 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:23:19.226Z,1422652999.226 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:23:19.679Z,1422652999.679 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:23:20.112Z,1422653000.112 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:23:20.580Z,1422653000.580 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:23:21.009Z,1422653001.009 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:23:21.446Z,1422653001.446 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:23:21.870Z,1422653001.870 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:23:22.323Z,1422653002.323 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:23:22.752Z,1422653002.752 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:23:23.188Z,1422653003.188 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:23:23.613Z,1422653003.613 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:23:23.670Z,1422653003.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:23:24.062Z,1422653004.062 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:23:24.075Z,1422653004.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:23:24.474Z,1422653004.474 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:23:24.931Z,1422653004.931 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:23:25.409Z,1422653005.409 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:23:25.881Z,1422653005.881 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:23:26.306Z,1422653006.306 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:23:26.742Z,1422653006.742 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:23:27.207Z,1422653007.207 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:23:27.638Z,1422653007.638 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:23:28.088Z,1422653008.088 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:23:28.179Z,1422653008.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:23:28.573Z,1422653008.573 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:23:28.586Z,1422653008.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:23:28.990Z,1422653008.990 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:23:29.436Z,1422653009.436 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:23:29.860Z,1422653009.860 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:23:30.300Z,1422653010.300 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:23:30.740Z,1422653010.740 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:23:30.780Z,1422653010.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:23:31.197Z,1422653011.197 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:23:31.217Z,1422653011.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:23:31.638Z,1422653011.638 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:23:32.090Z,1422653012.090 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:23:32.511Z,1422653012.511 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:23:32.948Z,1422653012.948 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:23:33.380Z,1422653013.380 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:23:33.437Z,1422653013.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:23:33.853Z,1422653013.853 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:23:33.878Z,1422653013.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:23:34.282Z,1422653014.282 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:23:34.750Z,1422653014.750 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:23:35.179Z,1422653015.179 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:23:35.227Z,1422653015.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:23:35.628Z,1422653015.628 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:23:35.641Z,1422653015.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:23:36.052Z,1422653016.052 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:23:36.509Z,1422653016.509 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:23:36.938Z,1422653016.938 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:23:37.399Z,1422653017.399 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:23:37.831Z,1422653017.831 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:23:38.264Z,1422653018.264 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:23:38.689Z,1422653018.689 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:23:39.138Z,1422653019.138 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:23:39.558Z,1422653019.558 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:23:40.015Z,1422653020.015 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:23:40.488Z,1422653020.488 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:23:40.928Z,1422653020.928 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:23:41.377Z,1422653021.377 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:23:41.829Z,1422653021.829 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:23:41.840Z,1422653021.840 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check.
2015-01-30T21:23:42.357Z,1422653022.357 [NAL9602](FAULT): received: 
2015-01-30T21:23:42.357Z,1422653022.357 [NAL9602] Data Fault, FailCount= 3
2015-01-30T21:23:42.357Z,1422653022.357 [NAL9602](ERROR): Data Fault
2015-01-30T21:23:42.449Z,1422653022.449 [CBIT](ERROR): Data Fault in component: NAL9602
2015-01-30T21:23:42.831Z,1422653022.831 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:23:42.860Z,1422653022.860 [NAL9602](INFO): Powering down
2015-01-30T21:23:43.308Z,1422653023.308 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:23:43.737Z,1422653023.737 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:23:43.814Z,1422653023.814 [CBIT](INFO): Clearing failed state for component NAL9602
2015-01-30T21:23:43.814Z,1422653023.814 [NAL9602] No Fault, FailCount= 3
2015-01-30T21:23:44.159Z,1422653024.159 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:23:44.560Z,1422653024.560 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:23:45.014Z,1422653025.014 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:23:45.422Z,1422653025.422 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:23:45.872Z,1422653025.872 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:23:46.300Z,1422653026.300 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:23:46.728Z,1422653026.728 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:23:47.153Z,1422653027.153 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:23:47.201Z,1422653027.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:23:47.606Z,1422653027.606 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:23:47.620Z,1422653027.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:23:48.030Z,1422653028.030 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:23:48.060Z,1422653028.060 [NAL9602](INFO): Powering up NAL9602
2015-01-30T21:23:48.476Z,1422653028.476 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:23:48.892Z,1422653028.892 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:23:48.931Z,1422653028.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:23:49.332Z,1422653029.332 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:23:49.359Z,1422653029.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:23:49.754Z,1422653029.754 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:23:50.210Z,1422653030.210 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:23:50.634Z,1422653030.634 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:23:51.080Z,1422653031.080 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:23:51.509Z,1422653031.509 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:23:51.945Z,1422653031.945 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:23:52.386Z,1422653032.386 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:23:52.838Z,1422653032.838 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:23:53.259Z,1422653033.259 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:23:53.696Z,1422653033.696 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:23:54.129Z,1422653034.129 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:23:54.184Z,1422653034.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:23:54.589Z,1422653034.589 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:23:54.603Z,1422653034.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:23:55.018Z,1422653035.018 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:23:55.511Z,1422653035.511 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:23:55.935Z,1422653035.935 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:23:56.400Z,1422653036.400 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:23:56.825Z,1422653036.825 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:23:57.290Z,1422653037.290 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:23:57.730Z,1422653037.730 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:23:58.191Z,1422653038.191 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:23:58.620Z,1422653038.620 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:23:59.080Z,1422653039.080 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:23:59.083Z,1422653039.083 [NAL9602](INFO): NAL9602 initialized
2015-01-30T21:23:59.505Z,1422653039.505 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:23:59.962Z,1422653039.962 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:24:00.390Z,1422653040.390 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:24:00.863Z,1422653040.863 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:24:01.312Z,1422653041.312 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:24:01.748Z,1422653041.748 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:24:02.181Z,1422653042.181 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:24:02.646Z,1422653042.646 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:24:03.086Z,1422653043.086 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:24:03.539Z,1422653043.539 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:24:03.967Z,1422653043.967 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:24:04.400Z,1422653044.400 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:24:04.837Z,1422653044.837 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:24:05.290Z,1422653045.290 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:24:05.719Z,1422653045.719 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:24:06.169Z,1422653046.169 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:24:06.612Z,1422653046.612 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:24:07.069Z,1422653047.069 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:24:07.497Z,1422653047.497 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:24:07.946Z,1422653047.946 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:24:08.387Z,1422653048.387 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:24:08.430Z,1422653048.430 [BPC1](ERROR): B bank expecting battery number:1 and read number: uart read:X
$S,01,270F,02,00,04,64%25
$C1,01,FF,02,00,03,FF,04,00,05,00,06,00,07,00%72
$B11,0A,FFFC%36
$B12,0A,FFFC%35
$B13,0A,0000%31
$B14,0A,FFFC%33
$B15,0A,0000%37
$B16,0A,0000%34
$B17,0A,0000%35
$B18,0A,0000%3A
$S,01,270F,02,00,04,64%25
$C1,01,FF,02,00,03,FF,04,00,05,00,06,00,07,00%72
$B11,02,000A,01,02A8,03,0001,08,0B93,09,4128,0A,FFFD,0B,FFFD%3C
$B11,0C,0001,0D,0064,0E,005F,0F,192A,10,192B,11,FFFF,12,FFFF%37
$B11,13,FFFF,14,0000,15,41A0,16,00E0,17,0001,18,1A90,19,3840%37
$B11,1A,0031,1B,458B,1C,0095%46
$B12,02,000A,01,02A8,03,0001,08,0B84,09,4126,0A,FFFC,0B,FFFD%30
$B12,0C,0001,0D,0064,0E,0061,0F,19A4,10,19A7,11,FFFF,12,FFFF%40
$B12,13,FFFF,14,0000,15,41A0,16,00E0,17,0001,18,1A90,19,3840%34
$B12,1A,0031,1B,458B,1C,00BE%4E
$B13,02,000A,01,02A8,03,0001,08,0B79,09,4128,0A,FFFD,0B,FFFF%38
$B13,0C,0001,0D,0064,0E,005F,0F,1935,10,1937,11,FFFF,12,FFFF%34
$B13,13,FFFF,14,0000,15,41A0,16,00E0,17,0001,18,1A90,19,3840%35
$B13,1A,0031,1B,458B,1C,0086%46
$B14,02,000A,01,02A8,03,0001,08,0B7A,09,4126,0A,FFFC,0B,FFFD%4C
$B14,0C,0001,0D,0064,0E,005F,0F,1916,10,1919,11,FFFF,12,FFFF%3E
$B14,13,FFFF,14,0000,15,41A0,16,00E0,17,0001,18,1A90,19,3840%32
$B14,1A,0031,1B,458B,1C,00AE%4B
$B15,02,000A,01,02A8,03,0001,08,0B87,09,412B,0A,0000,0B,0000%47
$B15,0C,0001,0D,0064,0E,0062,0F,19D1,10,19D1,11,FFFF,12,FFFF%47
$B15,13,FFFF,14,0000,15,41A0,16,00E0,17,0001,18,1A90,19,3840%33
$B15,1A,0031,1B,458C,1C,00CB%4E
$B16,02,000A,01,02A8,03,0001,08,0B75,09,412E,0A,0000,0B,0000%4E
$B16,0C,0001,0D,0064,0E,0060,0F,1980,10,1980,11,FFFF,12,FFFF%46
$B16,13,FFFF,14,0000,15,41A0,16,00E0,17,0001,18,1A90,19,3840%30
$B16,1A,0031,1B,458C,1C,00F7%3D
$B17,02,000A,01,02A8,03,0001,08,0B72,09,40E2,0A,0000,0B,0000%49
$B17,0C,0001,0D,0064,0E,005F,0F,1922,10,1922,11,FFFF,12,FFFF%32
$B17,13,FFFF,14,0000,15,41A0,16,00E0,17,0001,18,1A90,19,3840%31
$B17,1A,0031,1B,458B,1C,00A1%3C
$B18,02,000A,01,02A8,03,0001,08,0B70,09,404F,0A,0000,0B,0001%40
$B18,0C,0001,0D,0061,0E,005C,0F,1858,10,193A,11,FFFF,12,FFFF%43
$B18,13,34F8,14,0000,15,41A0,16,00E0,17,0001,18,1A90,19,3840%47
$B18,1A,0031,1B,458C,1C,00F0%34

2015-01-30T21:24:08.430Z,1422653048.430 [BPC1](FAULT): Failed to parse bank B battery data
2015-01-30T21:24:08.430Z,1422653048.430 [BPC1] Data Fault, FailCount= 1
2015-01-30T21:24:08.430Z,1422653048.430 [BPC1](ERROR): Data Fault
2015-01-30T21:24:08.452Z,1422653048.452 [CBIT](ERROR): Data Fault in component: BPC1
2015-01-30T21:24:08.864Z,1422653048.864 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:24:09.284Z,1422653049.284 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:24:09.733Z,1422653049.733 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:24:09.781Z,1422653049.781 [CBIT](INFO): Clearing failed state for component BPC1
2015-01-30T21:24:09.781Z,1422653049.781 [BPC1] No Fault, FailCount= 1
2015-01-30T21:24:10.166Z,1422653050.166 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:24:10.674Z,1422653050.674 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:24:11.131Z,1422653051.131 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:24:11.576Z,1422653051.576 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:24:12.009Z,1422653052.009 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:24:12.449Z,1422653052.449 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:24:12.878Z,1422653052.878 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:24:13.307Z,1422653053.307 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2015-01-30T21:24:13.314Z,1422653053.314 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:24:13.747Z,1422653053.747 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:24:14.256Z,1422653054.256 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:24:14.680Z,1422653054.680 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:24:15.157Z,1422653055.157 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:24:15.582Z,1422653055.582 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:24:16.014Z,1422653056.014 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:24:16.439Z,1422653056.439 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:24:16.492Z,1422653056.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:24:16.900Z,1422653056.900 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:24:16.913Z,1422653056.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:24:17.316Z,1422653057.316 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:24:17.769Z,1422653057.769 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:24:18.214Z,1422653058.214 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:24:18.255Z,1422653058.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:24:18.676Z,1422653058.676 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:24:18.709Z,1422653058.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:24:19.128Z,1422653059.128 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:24:19.588Z,1422653059.588 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:24:20.030Z,1422653060.030 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:24:20.469Z,1422653060.469 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:24:20.902Z,1422653060.902 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:24:21.355Z,1422653061.355 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:24:21.771Z,1422653061.771 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:24:22.237Z,1422653062.237 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:24:22.657Z,1422653062.657 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:24:23.160Z,1422653063.160 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:24:23.606Z,1422653063.606 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:24:24.067Z,1422653064.067 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:24:24.527Z,1422653064.527 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:24:24.985Z,1422653064.985 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:24:25.441Z,1422653065.441 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:24:25.914Z,1422653065.914 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:24:26.342Z,1422653066.342 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:24:26.783Z,1422653066.783 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:24:27.212Z,1422653067.212 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:24:27.669Z,1422653067.669 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:24:28.118Z,1422653068.118 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:24:28.560Z,1422653068.560 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:24:28.975Z,1422653068.975 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:24:29.415Z,1422653069.415 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:24:29.844Z,1422653069.844 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:24:30.281Z,1422653070.281 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:24:30.705Z,1422653070.705 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:24:31.166Z,1422653071.166 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:24:31.579Z,1422653071.579 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:24:32.019Z,1422653072.019 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:24:32.445Z,1422653072.445 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:24:32.886Z,1422653072.886 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:24:33.321Z,1422653073.321 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:24:33.770Z,1422653073.770 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:24:34.187Z,1422653074.187 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:24:34.639Z,1422653074.639 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:24:35.076Z,1422653075.076 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:24:35.537Z,1422653075.537 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:24:35.985Z,1422653075.985 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:24:36.434Z,1422653076.434 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:24:36.863Z,1422653076.863 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:24:36.890Z,1422653076.890 [BPC1](ERROR): A bank expecting battery number:1 and read number: uart read:X
$S,01,270F,02,00,04,64%25
$C1,01,FF,02,00,03,FF,04,00,05,00,06,00,07,00%72
$B11,0A,FFFD%31
$B12,0A,FFFD%32
$B13,0A,FFFD%33
$B14,0A,FFFC%33
$B15,0A,0000%37
$B16,0A,0000%34
$B17,0A,0000%35
$B18,0A,0000%3A
$S,01,270F,02,00,04,64%25
$C1,01,FF,02,00,03,FF,04,00,05,00,06,00,07,00%72
$B11,02,000A,01,02A8,03,0001,08,0B93,09,4128,0A,FFFC,0B,FFFD%3B
$B11,0C,0001,0D,0064,0E,005F,0F,192A,10,192B,11,FFFF,12,FFFF%37
$B11,13,FFFF,14,0000,15,41A0,16,00E0,17,0001,18,1A90,19,3840%37
$B11,1A,0031,1B,458B,1C,0095%46
$B12,02,000A,01,02A8,03,0001,08,0B84,09,4126,0A,FFFD,0B,FFFD%37
$B12,0C,0001,0D,0064,0E,0061,0F,19A4,10,19A7,11,FFFF,12,FFFF%40
$B12,13,FFFF,14,0000,15,41A0,16,00E0,17,0001,18,1A90,19,3840%34
$B12,1A,0031,1B,458B,1C,00BE%4E
$B13,02,000A,01,02A8,03,0001,08,0B79,09,4128,0A,FFFD,0B,FFFE%3B
$B13,0C,0001,0D,0064,0E,005F,0F,1935,10,1937,11,FFFF,12,FFFF%34
$B13,13,FFFF,14,0000,15,41A0,16,00E0,17,0001,18,1A90,19,3840%35
$B13,1A,0031,1B,458B,1C,0086%46
$B14,02,000A,01,02A8,03,0001,08,0B7A,09,4126,0A,FFFC,0B,FFFC%4B
$B14,0C,0001,0D,0064,0E,005F,0F,1915,10,1919,11,FFFF,12,FFFF%3D
$B14,13,FFFF,14,0000,15,41A0,16,00E0,17,0001,18,1A90,19,3840%32
$B14,1A,0031,1B,458B,1C,00AE%4B
$B15,02,000A,01,02A8,03,0001,08,0B87,09,412B,0A,0000,0B,0000%47
$B15,0C,0001,0D,0064,0E,0062,0F,19D1,10,19D1,11,FFFF,12,FFFF%47
$B15,13,FFFF,14,0000,15,41A0,16,00E0,17,0001,18,1A90,19,3840%33
$B15,1A,0031,1B,458C,1C,00CB%4E
$B16,02,000A,01,02A8,03,0001,08,0B75,09,412F,0A,0000,0B,0000%4D
$B16,0C,0001,0D,0064,0E,0060,0F,1980,10,1980,11,FFFF,12,FFFF%46
$B16,13,FFFF,14,0000,15,41A0,16,00E0,17,0001,18,1A90,19,3840%30
$B16,1A,0031,1B,458C,1C,00F7%3D
$B17,02,000A,01,02A8,03,0001,08,0B72,09,40E2,0A,0000,0B,0000%49
$B17,0C,0001,0D,0064,0E,005F,0F,1922,10,1922,11,FFFF,12,FFFF%32
$B17,13,FFFF,14,0000,15,41A0,16,00E0,17,0001,18,1A90,19,3840%31
$B17,1A,0031,1B,458B,1C,00A1%3C
$B18,02,000A,01,02A8,03,0001,08,0B70,09,404F,0A,0000,0B,0000%41
$B18,0C,0001,0D,0061,0E,005C,0F,1858,10,193A,11,FFFF,12,FFFF%43
$B18,13,FFFF,14,0000,15,41A0,16,00E0,17,0001,18,1A90,19,3840%3E
$B18,1A,0031,1B,458C,1C,00F0%34

2015-01-30T21:24:36.890Z,1422653076.890 [BPC1](FAULT): Failed to parse bank A battery data
2015-01-30T21:24:36.890Z,1422653076.890 [BPC1] Data Fault, FailCount= 1
2015-01-30T21:24:36.890Z,1422653076.890 [BPC1](ERROR): Data Fault
2015-01-30T21:24:36.978Z,1422653076.978 [CBIT](ERROR): Data Fault in component: BPC1
2015-01-30T21:24:37.368Z,1422653077.368 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:24:37.804Z,1422653077.804 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:24:38.257Z,1422653078.257 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:24:38.310Z,1422653078.310 [CBIT](INFO): Clearing failed state for component BPC1
2015-01-30T21:24:38.310Z,1422653078.310 [BPC1] No Fault, FailCount= 1
2015-01-30T21:24:38.674Z,1422653078.674 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:24:39.174Z,1422653079.174 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:24:39.667Z,1422653079.667 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:24:40.112Z,1422653080.112 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:24:40.549Z,1422653080.549 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:24:41.001Z,1422653081.001 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:24:41.426Z,1422653081.426 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:24:41.867Z,1422653081.867 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:24:42.293Z,1422653082.293 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:24:42.715Z,1422653082.715 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:24:43.132Z,1422653083.132 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:24:43.581Z,1422653083.581 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:24:44.009Z,1422653084.009 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:24:44.459Z,1422653084.459 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:24:44.887Z,1422653084.887 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:24:45.331Z,1422653085.331 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:24:45.745Z,1422653085.745 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:24:46.189Z,1422653086.189 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:24:46.622Z,1422653086.622 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:24:47.079Z,1422653087.079 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:24:47.511Z,1422653087.511 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:24:47.960Z,1422653087.960 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:24:48.373Z,1422653088.373 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:24:48.825Z,1422653088.825 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:24:49.255Z,1422653089.255 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:24:49.719Z,1422653089.719 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:24:50.136Z,1422653090.136 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:24:50.592Z,1422653090.592 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:24:51.037Z,1422653091.037 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:24:51.489Z,1422653091.489 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:24:51.986Z,1422653091.986 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:24:52.435Z,1422653092.435 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:24:52.895Z,1422653092.895 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:24:53.340Z,1422653093.340 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:24:53.396Z,1422653093.396 [Default:UpdateAndReportMinutesSinceMissionStarted] Running Loop=1
2015-01-30T21:24:53.396Z,1422653093.396 [Default:UpdateAndReportMinutesSinceMissionStarted](INFO): Aggregate::initialize Default:UpdateAndReportMinutesSinceMissionStarted
2015-01-30T21:24:53.396Z,1422653093.396 [Default:UpdateAndReportMinutesSinceMissionStarted:A] Running Loop=1
2015-01-30T21:24:53.397Z,1422653093.397 [Default:UpdateAndReportMinutesSinceMissionStarted:A] Stopped
2015-01-30T21:24:53.397Z,1422653093.397 [Default:UpdateAndReportMinutesSinceMissionStarted:B] Running Loop=1
2015-01-30T21:24:53.789Z,1422653093.789 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:24:53.834Z,1422653093.834 [Default:UpdateAndReportMinutesSinceMissionStarted:B](IMPORTANT): Default mission has been running for 32.010817 min 
2015-01-30T21:24:53.834Z,1422653093.834 [Default:UpdateAndReportMinutesSinceMissionStarted:B] Stopped
2015-01-30T21:24:53.834Z,1422653093.834 [Default:UpdateAndReportMinutesSinceMissionStarted](INFO): Completed Default:UpdateAndReportMinutesSinceMissionStarted
2015-01-30T21:24:53.835Z,1422653093.835 [Default:UpdateAndReportMinutesSinceMissionStarted] Stopped
2015-01-30T21:24:53.835Z,1422653093.835 [Default:UpdateAndReportMinutesSinceMissionStarted](INFO): Aggregate::uninitialize Default:UpdateAndReportMinutesSinceMissionStarted
2015-01-30T21:24:54.250Z,1422653094.250 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:24:54.712Z,1422653094.712 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:24:55.168Z,1422653095.168 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:24:55.624Z,1422653095.624 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:24:56.069Z,1422653096.069 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:24:56.521Z,1422653096.521 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:24:56.970Z,1422653096.970 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:24:57.387Z,1422653097.387 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:24:57.839Z,1422653097.839 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:24:58.268Z,1422653098.268 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:24:58.700Z,1422653098.700 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:24:59.137Z,1422653099.137 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:24:59.222Z,1422653099.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:24:59.622Z,1422653099.622 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:24:59.635Z,1422653099.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:25:00.039Z,1422653100.039 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:25:00.520Z,1422653100.520 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:25:00.936Z,1422653100.936 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:25:01.389Z,1422653101.389 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:25:01.805Z,1422653101.805 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:25:02.254Z,1422653102.254 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:25:02.679Z,1422653102.679 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:25:03.128Z,1422653103.128 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:25:03.548Z,1422653103.548 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:25:03.997Z,1422653103.997 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:25:04.426Z,1422653104.426 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:25:04.890Z,1422653104.890 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:25:05.323Z,1422653105.323 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:25:05.800Z,1422653105.800 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:25:06.232Z,1422653106.232 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:25:06.684Z,1422653106.684 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:25:07.166Z,1422653107.166 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:25:07.199Z,1422653107.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:25:07.626Z,1422653107.626 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:25:07.682Z,1422653107.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:25:08.099Z,1422653108.099 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:25:08.544Z,1422653108.544 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:25:09.021Z,1422653109.021 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:25:09.489Z,1422653109.489 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:25:09.926Z,1422653109.926 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:25:10.371Z,1422653110.371 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:25:10.787Z,1422653110.787 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:25:11.256Z,1422653111.256 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:25:11.693Z,1422653111.693 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:25:12.146Z,1422653112.146 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:25:12.578Z,1422653112.578 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:25:13.024Z,1422653113.024 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:25:13.452Z,1422653113.452 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:25:13.884Z,1422653113.884 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2015-01-30T21:25:13.892Z,1422653113.892 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:25:14.313Z,1422653114.313 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:25:14.766Z,1422653114.766 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:25:15.194Z,1422653115.194 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:25:15.643Z,1422653115.643 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:25:16.084Z,1422653116.084 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:25:16.516Z,1422653116.516 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:25:16.941Z,1422653116.941 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:25:17.391Z,1422653117.391 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:25:17.811Z,1422653117.811 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:25:18.259Z,1422653118.259 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:25:18.684Z,1422653118.684 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:25:19.124Z,1422653119.124 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:25:19.566Z,1422653119.566 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:25:20.010Z,1422653120.010 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:25:20.446Z,1422653120.446 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:25:20.891Z,1422653120.891 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:25:21.344Z,1422653121.344 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:25:21.813Z,1422653121.813 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:25:22.241Z,1422653122.241 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:25:22.726Z,1422653122.726 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:25:23.139Z,1422653123.139 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:25:23.618Z,1422653123.618 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:25:24.100Z,1422653124.100 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:25:24.145Z,1422653124.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:25:24.553Z,1422653124.553 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:25:24.571Z,1422653124.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:25:24.973Z,1422653124.973 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:25:25.434Z,1422653125.434 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:25:25.859Z,1422653125.859 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:25:26.291Z,1422653126.291 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:25:26.732Z,1422653126.732 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:25:27.181Z,1422653127.181 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:25:27.606Z,1422653127.606 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:25:28.042Z,1422653128.042 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:25:28.511Z,1422653128.511 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:25:28.967Z,1422653128.967 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:25:29.380Z,1422653129.380 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:25:29.829Z,1422653129.829 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:25:30.261Z,1422653130.261 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:25:30.698Z,1422653130.698 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:25:31.135Z,1422653131.135 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:25:31.584Z,1422653131.584 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:25:32.013Z,1422653132.013 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:25:32.461Z,1422653132.461 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:25:32.886Z,1422653132.886 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:25:33.334Z,1422653133.334 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:25:33.762Z,1422653133.762 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:25:34.204Z,1422653134.204 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:25:34.632Z,1422653134.632 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:25:35.081Z,1422653135.081 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:25:35.546Z,1422653135.546 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:25:36.027Z,1422653136.027 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:25:36.447Z,1422653136.447 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:25:36.963Z,1422653136.963 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:25:37.377Z,1422653137.377 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:25:37.845Z,1422653137.845 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:25:38.294Z,1422653138.294 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:25:38.739Z,1422653138.739 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:25:39.164Z,1422653139.164 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:25:39.196Z,1422653139.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:25:39.621Z,1422653139.621 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:25:39.635Z,1422653139.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:25:40.041Z,1422653140.041 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:25:40.493Z,1422653140.493 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:25:40.922Z,1422653140.922 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:25:41.391Z,1422653141.391 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:25:41.824Z,1422653141.824 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:25:42.274Z,1422653142.274 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:25:42.693Z,1422653142.693 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:25:42.745Z,1422653142.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:25:43.156Z,1422653143.156 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:25:43.184Z,1422653143.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:25:43.590Z,1422653143.590 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:25:44.051Z,1422653144.051 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:25:44.500Z,1422653144.500 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:25:44.945Z,1422653144.945 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:25:45.362Z,1422653145.362 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:25:45.822Z,1422653145.822 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:25:46.239Z,1422653146.239 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:25:46.695Z,1422653146.695 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:25:47.112Z,1422653147.112 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:25:47.151Z,1422653147.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:25:47.564Z,1422653147.564 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:25:47.588Z,1422653147.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:25:47.989Z,1422653147.989 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:25:48.434Z,1422653148.434 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:25:48.854Z,1422653148.854 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:25:49.299Z,1422653149.299 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:25:49.728Z,1422653149.728 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:25:50.213Z,1422653150.213 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:25:50.653Z,1422653150.653 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:25:51.110Z,1422653151.110 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:25:51.535Z,1422653151.535 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:25:51.971Z,1422653151.971 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:25:52.400Z,1422653152.400 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:25:52.845Z,1422653152.845 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:25:53.261Z,1422653153.261 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:25:53.303Z,1422653153.303 [BPC1](FAULT): Failed to receive battery data
2015-01-30T21:25:53.303Z,1422653153.303 [BPC1] Communications Fault, FailCount= 1
2015-01-30T21:25:53.303Z,1422653153.303 [BPC1](ERROR): Communications Fault
2015-01-30T21:25:53.326Z,1422653153.326 [CBIT](ERROR): Communications Fault in component: BPC1
2015-01-30T21:25:53.718Z,1422653153.718 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:25:54.143Z,1422653154.143 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:25:54.599Z,1422653154.599 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:25:54.628Z,1422653154.628 [CBIT](INFO): Clearing failed state for component BPC1
2015-01-30T21:25:54.628Z,1422653154.628 [BPC1] No Fault, FailCount= 1
2015-01-30T21:25:55.020Z,1422653155.020 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:25:55.524Z,1422653155.524 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:25:55.969Z,1422653155.969 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:25:56.418Z,1422653156.418 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:25:56.847Z,1422653156.847 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:25:57.296Z,1422653157.296 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:25:57.724Z,1422653157.724 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:25:58.177Z,1422653158.177 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:25:58.609Z,1422653158.609 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:25:59.065Z,1422653159.065 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:25:59.499Z,1422653159.499 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:25:59.948Z,1422653159.948 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:26:00.368Z,1422653160.368 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:26:00.837Z,1422653160.837 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:26:01.262Z,1422653161.262 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:26:01.710Z,1422653161.710 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:26:02.127Z,1422653162.127 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:26:02.576Z,1422653162.576 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:26:03.009Z,1422653163.009 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:26:03.481Z,1422653163.481 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:26:03.898Z,1422653163.898 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:26:04.355Z,1422653164.355 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:26:04.779Z,1422653164.779 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:26:05.240Z,1422653165.240 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:26:05.668Z,1422653165.668 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:26:06.110Z,1422653166.110 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:26:06.546Z,1422653166.546 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:26:07.002Z,1422653167.002 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:26:07.443Z,1422653167.443 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:26:07.483Z,1422653167.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:26:07.888Z,1422653167.888 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:26:07.938Z,1422653167.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:26:08.340Z,1422653168.340 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:26:08.797Z,1422653168.797 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:26:09.259Z,1422653169.259 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:26:09.743Z,1422653169.743 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:26:10.168Z,1422653170.168 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:26:10.609Z,1422653170.609 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:26:11.033Z,1422653171.033 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:26:11.510Z,1422653171.510 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:26:11.947Z,1422653171.947 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:26:12.387Z,1422653172.387 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:26:12.812Z,1422653172.812 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:26:13.236Z,1422653173.236 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:26:13.649Z,1422653173.649 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2015-01-30T21:26:13.657Z,1422653173.657 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:26:14.102Z,1422653174.102 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:26:14.530Z,1422653174.530 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:26:14.999Z,1422653174.999 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:26:15.440Z,1422653175.440 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:26:15.892Z,1422653175.892 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:26:16.333Z,1422653176.333 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:26:16.798Z,1422653176.798 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:26:17.230Z,1422653177.230 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:26:17.691Z,1422653177.691 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:26:18.124Z,1422653178.124 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:26:18.561Z,1422653178.561 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:26:18.985Z,1422653178.985 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:26:19.426Z,1422653179.426 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:26:19.850Z,1422653179.850 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:26:20.351Z,1422653180.351 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:26:20.781Z,1422653180.781 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:26:21.220Z,1422653181.220 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:26:21.682Z,1422653181.682 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:26:22.122Z,1422653182.122 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:26:22.547Z,1422653182.547 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:26:23.007Z,1422653183.007 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:26:23.436Z,1422653183.436 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:26:23.901Z,1422653183.901 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:26:24.357Z,1422653184.357 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:26:24.810Z,1422653184.810 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:26:25.239Z,1422653185.239 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:26:25.686Z,1422653185.686 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:26:26.108Z,1422653186.108 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:26:26.569Z,1422653186.569 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:26:26.988Z,1422653186.988 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:26:27.430Z,1422653187.430 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:26:27.863Z,1422653187.863 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:26:28.351Z,1422653188.351 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:26:28.797Z,1422653188.797 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:26:29.249Z,1422653189.249 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:26:29.669Z,1422653189.669 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:26:30.118Z,1422653190.118 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:26:30.548Z,1422653190.548 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:26:31.008Z,1422653191.008 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:26:31.445Z,1422653191.445 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:26:31.881Z,1422653191.881 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:26:32.314Z,1422653192.314 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:26:32.774Z,1422653192.774 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:26:33.203Z,1422653193.203 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:26:33.636Z,1422653193.636 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:26:34.073Z,1422653194.073 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:26:34.529Z,1422653194.529 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:26:34.954Z,1422653194.954 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:26:35.418Z,1422653195.418 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:26:35.843Z,1422653195.843 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:26:36.319Z,1422653196.319 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:26:36.753Z,1422653196.753 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:26:36.786Z,1422653196.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:26:37.206Z,1422653197.206 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:26:37.245Z,1422653197.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:26:37.655Z,1422653197.655 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:26:38.131Z,1422653198.131 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:26:38.579Z,1422653198.579 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:26:39.053Z,1422653199.053 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:26:39.477Z,1422653199.477 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:26:39.929Z,1422653199.929 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:26:40.355Z,1422653200.355 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:26:40.803Z,1422653200.803 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:26:41.220Z,1422653201.220 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:26:41.660Z,1422653201.660 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:26:42.093Z,1422653202.093 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:26:42.133Z,1422653202.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:26:42.542Z,1422653202.542 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:26:42.571Z,1422653202.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:26:42.969Z,1422653202.969 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:26:43.419Z,1422653203.419 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:26:43.860Z,1422653203.860 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:26:44.353Z,1422653204.353 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:26:44.785Z,1422653204.785 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:26:45.234Z,1422653205.234 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:26:45.691Z,1422653205.691 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:26:46.135Z,1422653206.135 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:26:46.570Z,1422653206.570 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:26:47.021Z,1422653207.021 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:26:47.469Z,1422653207.469 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:26:47.915Z,1422653207.915 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:26:48.335Z,1422653208.335 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:26:48.803Z,1422653208.803 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:26:49.240Z,1422653209.240 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:26:49.333Z,1422653209.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:26:49.721Z,1422653209.721 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:26:49.773Z,1422653209.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:26:50.177Z,1422653210.177 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:26:50.622Z,1422653210.622 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:26:51.055Z,1422653211.055 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:26:51.536Z,1422653211.536 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:26:51.969Z,1422653211.969 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:26:52.445Z,1422653212.445 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:26:52.875Z,1422653212.875 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:26:53.346Z,1422653213.346 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:26:53.799Z,1422653213.799 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:26:54.252Z,1422653214.252 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:26:54.680Z,1422653214.680 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:26:55.114Z,1422653215.114 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:26:55.554Z,1422653215.554 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:26:56.002Z,1422653216.002 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:26:56.432Z,1422653216.432 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:26:56.876Z,1422653216.876 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:26:57.304Z,1422653217.304 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:26:57.760Z,1422653217.760 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:26:58.183Z,1422653218.183 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:26:58.626Z,1422653218.626 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:26:59.055Z,1422653219.055 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:26:59.512Z,1422653219.512 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:26:59.941Z,1422653219.941 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:27:00.386Z,1422653220.386 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:27:00.822Z,1422653220.822 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:27:01.263Z,1422653221.263 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:27:01.692Z,1422653221.692 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:27:01.723Z,1422653221.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:27:02.132Z,1422653222.132 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:27:02.154Z,1422653222.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:27:02.559Z,1422653222.559 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:27:03.013Z,1422653223.013 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:27:03.447Z,1422653223.447 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:27:03.911Z,1422653223.911 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:27:04.328Z,1422653224.328 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:27:04.816Z,1422653224.816 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:27:05.257Z,1422653225.257 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:27:05.694Z,1422653225.694 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:27:06.150Z,1422653226.150 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:27:06.607Z,1422653226.607 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:27:07.036Z,1422653227.036 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:27:07.528Z,1422653227.528 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:27:07.957Z,1422653227.957 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:27:08.422Z,1422653228.422 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:27:08.887Z,1422653228.887 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:27:09.331Z,1422653229.331 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:27:09.759Z,1422653229.759 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:27:10.197Z,1422653230.197 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:27:10.633Z,1422653230.633 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:27:11.082Z,1422653231.082 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:27:11.503Z,1422653231.503 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:27:11.959Z,1422653231.959 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:27:12.376Z,1422653232.376 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:27:12.813Z,1422653232.813 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:27:13.237Z,1422653233.237 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:27:13.690Z,1422653233.690 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:27:14.099Z,1422653234.099 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2015-01-30T21:27:14.107Z,1422653234.107 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:27:14.557Z,1422653234.557 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:27:14.992Z,1422653234.992 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:27:15.045Z,1422653235.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:27:15.457Z,1422653235.457 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:27:15.483Z,1422653235.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:27:15.881Z,1422653235.881 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:27:16.333Z,1422653236.333 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:27:16.763Z,1422653236.763 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:27:17.207Z,1422653237.207 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:27:17.632Z,1422653237.632 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:27:17.654Z,1422653237.654 [NAL9602](INFO): SBD MO Status=0, MOMSN=47165, MT Status=0, MTMSN=0
2015-01-30T21:27:17.654Z,1422653237.654 [NAL9602](ERROR): Buffer populated but no message sent from NAL9602. Error code: 0
2015-01-30T21:27:18.081Z,1422653238.081 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:27:18.506Z,1422653238.506 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:27:18.950Z,1422653238.950 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:27:19.387Z,1422653239.387 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:27:19.854Z,1422653239.854 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:27:20.285Z,1422653240.285 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:27:20.769Z,1422653240.769 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:27:21.197Z,1422653241.197 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:27:21.674Z,1422653241.674 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:27:22.107Z,1422653242.107 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:27:22.612Z,1422653242.612 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:27:23.064Z,1422653243.064 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:27:23.513Z,1422653243.513 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:27:23.938Z,1422653243.938 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:27:24.374Z,1422653244.374 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:27:24.803Z,1422653244.803 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:27:25.240Z,1422653245.240 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:27:25.656Z,1422653245.656 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:27:26.117Z,1422653246.117 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:27:26.546Z,1422653246.546 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:27:26.987Z,1422653246.987 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:27:27.419Z,1422653247.419 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:27:27.868Z,1422653247.868 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:27:27.872Z,1422653247.872 [NAL9602](INFO): SBD MO Status=0, MOMSN=47166, MT Status=0, MTMSN=0
2015-01-30T21:27:27.872Z,1422653247.872 [NAL9602](ERROR): Buffer populated but no message sent from NAL9602. Error code: 0
2015-01-30T21:27:28.300Z,1422653248.300 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:27:28.738Z,1422653248.738 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:27:29.166Z,1422653249.166 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:27:29.619Z,1422653249.619 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:27:30.043Z,1422653250.043 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:27:30.476Z,1422653250.476 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:27:30.893Z,1422653250.893 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:27:31.333Z,1422653251.333 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:27:31.764Z,1422653251.764 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:27:32.207Z,1422653252.207 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:27:32.667Z,1422653252.667 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:27:33.112Z,1422653253.112 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:27:33.565Z,1422653253.565 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:27:34.001Z,1422653254.001 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:27:34.434Z,1422653254.434 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:27:34.883Z,1422653254.883 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:27:35.327Z,1422653255.327 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:27:35.792Z,1422653255.792 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:27:36.249Z,1422653256.249 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:27:36.706Z,1422653256.706 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:27:37.175Z,1422653257.175 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:27:37.655Z,1422653257.655 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:27:38.072Z,1422653258.072 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:27:38.529Z,1422653258.529 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:27:38.949Z,1422653258.949 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:27:39.410Z,1422653259.410 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:27:39.829Z,1422653259.829 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:27:40.267Z,1422653260.267 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:27:40.692Z,1422653260.692 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:27:41.129Z,1422653261.129 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:27:41.557Z,1422653261.557 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:27:41.998Z,1422653261.998 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:27:42.397Z,1422653262.397 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:27:42.839Z,1422653262.839 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:27:43.260Z,1422653263.260 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:27:43.301Z,1422653263.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:27:43.705Z,1422653263.705 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:27:43.719Z,1422653263.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-01-30T21:27:44.125Z,1422653264.125 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:27:44.578Z,1422653264.578 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:27:47.838Z,1422653267.838 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:27:48.320Z,1422653268.320 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:27:48.768Z,1422653268.768 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:27:49.216Z,1422653269.216 [DataOverHttps](INFO): setting available, lastComms_.elapsed()=0.002406
2015-01-30T21:27:49.219Z,1422653269.219 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:27:49.686Z,1422653269.686 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:27:50.118Z,1422653270.118 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:27:50.576Z,1422653270.576 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:27:51.016Z,1422653271.016 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:27:51.485Z,1422653271.485 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:27:51.965Z,1422653271.965 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:27:52.391Z,1422653272.391 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:27:52.830Z,1422653272.830 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:27:53.259Z,1422653273.259 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:27:53.281Z,1422653273.281 [NAL9602](INFO): SBD MO Status=0, MOMSN=47167, MT Status=0, MTMSN=0
2015-01-30T21:27:53.281Z,1422653273.281 [NAL9602](ERROR): Buffer populated but no message sent from NAL9602. Error code: 0
2015-01-30T21:27:53.741Z,1422653273.741 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:27:54.169Z,1422653274.169 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:27:54.613Z,1422653274.613 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:27:55.043Z,1422653275.043 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:27:55.483Z,1422653275.483 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:27:55.915Z,1422653275.915 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:27:56.376Z,1422653276.376 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:27:56.801Z,1422653276.801 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:27:57.242Z,1422653277.242 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:27:57.658Z,1422653277.658 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:27:58.147Z,1422653278.147 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:27:58.168Z,1422653278.168 [Default:CheckIn:Read_GPS](INFO): Timed out from 2015-01-30T21:22:58.1Z
2015-01-30T21:27:58.168Z,1422653278.168 [Default:CheckIn:Read_GPS] Stopped
2015-01-30T21:27:58.169Z,1422653278.169 [Default:CheckIn:Read_Iridium] Running Loop=1
2015-01-30T21:27:58.568Z,1422653278.568 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:27:59.209Z,1422653279.209 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:27:59.642Z,1422653279.642 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:28:02.901Z,1422653282.901 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:28:03.363Z,1422653283.363 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20150130T204932/Courier0020.lzma
2015-01-30T21:28:03.371Z,1422653283.371 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:28:03.856Z,1422653283.856 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:28:04.274Z,1422653284.274 [DataOverHttps](INFO): Moved sent file to Logs/20150130T204932/Courier0020.lzma.bak
2015-01-30T21:28:04.274Z,1422653284.274 [DataOverHttps](INFO): SBD MOMSN=1514196
2015-01-30T21:28:04.280Z,1422653284.280 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:28:04.760Z,1422653284.760 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:28:05.218Z,1422653285.218 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:28:08.518Z,1422653288.518 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:28:08.976Z,1422653288.976 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:28:09.460Z,1422653289.460 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:28:09.874Z,1422653289.874 [DataOverHttps](IMPORTANT): SBD MTMSN=20150130T212809
2015-01-30T21:28:09.882Z,1422653289.882 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:28:10.334Z,1422653290.334 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:28:10.758Z,1422653290.758 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:28:14.001Z,1422653294.001 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:28:14.422Z,1422653294.422 [DataOverHttps](INFO): Sending 575 bytes from file Logs/20150130T204932/Express0021.lzma
2015-01-30T21:28:14.426Z,1422653294.426 [DataOverHttps](INFO): Received command:restart application
2015-01-30T21:28:14.432Z,1422653294.432 [CommandLine](IMPORTANT): got command restart application
2015-01-30T21:28:14.435Z,1422653294.435 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:28:15.104Z,1422653295.104 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:28:15.436Z,1422653295.436 [CommandLine ThreadHandler](INFO): Uninitializing protected caller thread.
2015-01-30T21:28:15.436Z,1422653295.436 [CommandLine ThreadHandler](INFO): Thread cancelled.
2015-01-30T21:28:15.523Z,1422653295.523 [DataOverHttps](INFO): Moved sent file to Logs/20150130T204932/Express0021.lzma.bak
2015-01-30T21:28:15.524Z,1422653295.524 [DataOverHttps](INFO): SBD MOMSN=1514199
2015-01-30T21:28:15.534Z,1422653295.534 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:28:15.596Z,1422653295.596 [Supervisor](DEBUG): Uninitializing supervisor and starting cleanup.  Bye!
2015-01-30T21:28:15.596Z,1422653295.596 [CommandLine ThreadHandler](INFO): Thread cancelled.
2015-01-30T21:28:15.597Z,1422653295.597 [CommandLine](INFO): Join timeout helper Thread ID is 1412
2015-01-30T21:28:15.598Z,1422653295.598 [ComponentRegistry](INFO): Shutting down NavChartDb ThreadHandler
2015-01-30T21:28:15.598Z,1422653295.598 [NavChartDb ThreadHandler](INFO): Thread cancelled.
2015-01-30T21:28:15.598Z,1422653295.598 [NavChartDb](INFO): Join timeout helper Thread ID is 1413
2015-01-30T21:28:15.757Z,1422653295.757 [NavChartDb ThreadHandler](INFO): Uninitializing protected caller thread.
2015-01-30T21:28:15.757Z,1422653295.757 [NavChartDb ThreadHandler](INFO): Thread cancelled.
2015-01-30T21:28:15.776Z,1422653295.776 [ComponentRegistry](INFO): Shutting down Radio_Surface ThreadHandler
2015-01-30T21:28:15.776Z,1422653295.776 [Radio_Surface ThreadHandler](INFO): Thread cancelled.
2015-01-30T21:28:15.777Z,1422653295.777 [Radio_Surface](INFO): Join timeout helper Thread ID is 1414
2015-01-30T21:28:15.999Z,1422653295.999 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:28:16.013Z,1422653296.013 [Radio_Surface ThreadHandler](INFO): Uninitializing protected caller thread.
2015-01-30T21:28:16.013Z,1422653296.013 [Radio_Surface ThreadHandler](INFO): Thread cancelled.
2015-01-30T21:28:16.017Z,1422653296.017 [ComponentRegistry](INFO): Shutting down WetLabsBB2FL ThreadHandler
2015-01-30T21:28:16.017Z,1422653296.017 [WetLabsBB2FL ThreadHandler](INFO): Thread cancelled.
2015-01-30T21:28:16.017Z,1422653296.017 [WetLabsBB2FL](INFO): Join timeout helper Thread ID is 1415
2015-01-30T21:28:16.065Z,1422653296.065 [WetLabsBB2FL ThreadHandler](INFO): Uninitializing protected caller thread.
2015-01-30T21:28:16.065Z,1422653296.065 [WetLabsBB2FL](INFO): Powering down
2015-01-30T21:28:16.066Z,1422653296.066 [WetLabsBB2FL ThreadHandler](INFO): Thread cancelled.
2015-01-30T21:28:16.067Z,1422653296.067 [ComponentRegistry](INFO): Shutting down CTD_NeilBrown ThreadHandler
2015-01-30T21:28:16.067Z,1422653296.067 [CTD_NeilBrown ThreadHandler](INFO): Thread cancelled.
2015-01-30T21:28:16.067Z,1422653296.067 [CTD_NeilBrown](INFO): Join timeout helper Thread ID is 1416
2015-01-30T21:28:16.297Z,1422653296.297 [CTD_NeilBrown ThreadHandler](INFO): Uninitializing protected caller thread.
2015-01-30T21:28:16.298Z,1422653296.298 [CTD_NeilBrown](INFO): Powering down
2015-01-30T21:28:16.298Z,1422653296.298 [CTD_NeilBrown ThreadHandler](INFO): Thread cancelled.
2015-01-30T21:28:16.314Z,1422653296.314 [ComponentRegistry](INFO): Shutting down logger ThreadHandler
2015-01-30T21:28:16.315Z,1422653296.315 [logger ThreadHandler](INFO): Thread cancelled.
2015-01-30T21:28:16.315Z,1422653296.315 [logger](INFO): Join timeout helper Thread ID is 1417
2015-01-30T21:28:16.355Z,1422653296.355 [logger ThreadHandler](INFO): Uninitializing protected caller thread.
2015-01-30T21:28:16.356Z,1422653296.356 [logger ThreadHandler](INFO): Thread cancelled.
2015-01-30T21:28:16.374Z,1422653296.374 [ComponentRegistry](INFO): Shutting down CommandLine ThreadHandler
2015-01-30T21:28:16.374Z,1422653296.374 [CommandLine ThreadHandler](INFO): Thread cancelled.
2015-01-30T21:28:16.375Z,1422653296.375 [ComponentRegistry](INFO): Shutting down controlThread ThreadHandler
2015-01-30T21:28:16.375Z,1422653296.375 [controlThread ThreadHandler](INFO): Thread cancelled.
2015-01-30T21:28:16.375Z,1422653296.375 [controlThread](INFO): Join timeout helper Thread ID is 1418
2015-01-30T21:28:16.447Z,1422653296.447 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-30T21:28:16.495Z,1422653296.495 [controlThread ThreadHandler](INFO): Uninitializing protected caller thread.
2015-01-30T21:28:16.495Z,1422653296.495 [controlThread](DEBUG): Uninitializing ControlThread
2015-01-30T21:28:16.495Z,1422653296.495 [Aanderaa_O2](INFO): Powering down
2015-01-30T21:28:16.497Z,1422653296.497 [AHRS_sp3003D](INFO): Powering down
2015-01-30T21:28:16.658Z,1422653296.658 [DVL_micro](INFO): uninitialize:Powering down
2015-01-30T21:28:16.659Z,1422653296.659 [NAL9602](INFO): Powering down
2015-01-30T21:28:16.661Z,1422653296.661 [DepthRateCalculator](DEBUG): Initializing DepthRateCalculator.
2015-01-30T21:28:16.662Z,1422653296.662 [NavChart](DEBUG): Uninitialize NavChart Navigation.
2015-01-30T21:28:16.663Z,1422653296.663 [Default] Stopped
2015-01-30T21:28:16.663Z,1422653296.663 [Default](INFO): Aggregate::uninitialize Default
2015-01-30T21:28:16.663Z,1422653296.663 [Default:B.GoToSurface] Stopped
2015-01-30T21:28:16.663Z,1422653296.663 [Default:B.GoToSurface](DEBUG): Uninitialize GoToSurfaceComponent.
2015-01-30T21:28:16.663Z,1422653296.663 [Default:CheckIn] Stopped
2015-01-30T21:28:16.663Z,1422653296.663 [Default:CheckIn](INFO): Aggregate::uninitialize Default:CheckIn
2015-01-30T21:28:16.664Z,1422653296.664 [Default:CheckIn:A.SetSpeed] Stopped
2015-01-30T21:28:16.664Z,1422653296.664 [Default:CheckIn:A.SetSpeed](DEBUG): Uninitialize.
2015-01-30T21:28:16.664Z,1422653296.664 [Default:CheckIn:Read_Iridium] Stopped
2015-01-30T21:28:16.664Z,1422653296.664 [Default:WaitAtTheSurface] Stopped
2015-01-30T21:28:16.664Z,1422653296.664 [Default:WaitAtTheSurface](INFO): Aggregate::uninitialize Default:WaitAtTheSurface
2015-01-30T21:28:16.664Z,1422653296.664 [Default:WaitAtTheSurface:RunApplicationAtLowSpeed.SetSpeed] Stopped
2015-01-30T21:28:16.664Z,1422653296.664 [Default:WaitAtTheSurface:RunApplicationAtLowSpeed.SetSpeed](DEBUG): Uninitialize.
2015-01-30T21:28:16.667Z,1422653296.667 [VerticalControl](DEBUG): Uninitialize VerticalControlComponent.
2015-01-30T21:28:16.668Z,1422653296.668 [HorizontalControl](DEBUG): Uninitialize HorizontalControlComponent.
2015-01-30T21:28:16.668Z,1422653296.668 [SpeedControl](DEBUG): Uninitialize SpeedControlComponent.
2015-01-30T21:28:16.668Z,1422653296.668 [LoopControl](DEBUG): Uninitialize LoopControlComponent.
2015-01-30T21:28:16.669Z,1422653296.669 [BuoyancyServo](DEBUG): Uninitialize Buoyancy Servo.
2015-01-30T21:28:16.669Z,1422653296.669 [BuoyancyServo](INFO): Powering down
2015-01-30T21:28:16.682Z,1422653296.682 [ElevatorServo](DEBUG): Uninitialize Elevator Servo.
2015-01-30T21:28:16.682Z,1422653296.682 [ElevatorServo](INFO): Powering down
2015-01-30T21:28:16.683Z,1422653296.683 [MassServo](DEBUG): Uninitialize Mass Servo.
2015-01-30T21:28:16.683Z,1422653296.683 [MassServo](INFO): Powering down
2015-01-30T21:28:16.684Z,1422653296.684 [RudderServo](DEBUG): Uninitialize Rudder Servo.
2015-01-30T21:28:16.684Z,1422653296.684 [RudderServo](INFO): Powering down
2015-01-30T21:28:16.685Z,1422653296.685 [ThrusterServo](DEBUG): Uninitialize Thruster Servo.
2015-01-30T21:28:16.685Z,1422653296.685 [ThrusterServo](INFO): Powering down
2015-01-30T21:28:16.686Z,1422653296.686 [SBIT](DEBUG): Uninitialize SBIT Component.
2015-01-30T21:28:16.686Z,1422653296.686 [IBIT](DEBUG): Uninitialize IBIT Component.
2015-01-30T21:28:16.686Z,1422653296.686 [CBIT](DEBUG): Uninitialize CBIT Component.
2015-01-30T21:28:16.719Z,1422653296.719 [controlThread ThreadHandler](INFO): Thread cancelled.
2015-01-30T21:28:16.775Z,1422653296.775 [WetLabsBB2FL ThreadHandler](INFO): Thread cancelled.
2015-01-30T21:28:16.779Z,1422653296.779 [CTD_NeilBrown ThreadHandler](INFO): Thread cancelled.
2015-01-30T21:28:16.837Z,1422653296.837 [Radio_Surface ThreadHandler](INFO): Thread cancelled.
2015-01-30T21:28:16.884Z,1422653296.884 [NavChartDb ThreadHandler](INFO): Thread cancelled.
2015-01-30T21:28:16.944Z,1422653296.944 [logger ThreadHandler](INFO): Thread cancelled.