daphne Path

trajectory

20150130T205023 [BPC1]:A bank expecting battery number:1 and read number: uart

20150130T205023 [BPC1]:Failed to parse bank A battery data

20150130T205023 [CBIT]:Data Fault in component: BPC1

20150130T205024 [CBIT]:No ground fault detected

20150130T205051 [CommandLine]:Scheduling is paused

20150130T205051 [MissionManager]:Started mission Startup

20150130T205235 [BPC1]:A bank expecting battery number:1 and read number: uart

20150130T205235 [BPC1]:Failed to parse bank A battery data

20150130T205235 [CBIT]:Data Fault in component: BPC1

20150130T205247 [DVL_micro]:DVL failed to acquire valid data within timeout.

20150130T205247 [DVL_micro]:Data Fault

20150130T205247 [CBIT]:Data Fault in component: DVL_micro

20150130T205247 [DVL_micro]:LCB fault: Software Overcurrent.

20150130T205247 [DVL_micro]:Hardware Fault

20150130T205247 [NAL9602]:Failed to initiate SBD session. Error code: 2

20150130T205248 [BPC1]:B bank expecting battery number:1 and read number: uart

20150130T205248 [BPC1]:Failed to parse bank B battery data

20150130T205248 [CBIT]:Data Fault in component: BPC1

20150130T205252 [MissionManager]:Started mission Default

20150130T205337 [NAL9602]:Failed to initiate SBD session. Error code: 2

20150130T205355 [CommandLine]:got command ibit

20150130T205355 [IBIT]:Beginning Initiated BIT

20150130T205355 [IBIT]:Beginning control surface checks.

20150130T205355 [CBIT]:Beginning GF scan

20150130T205356 [DataOverHttps]:Server acknowledged file Logs/20150130T203032/Courier0012.lzma, notLogs/20150130T204932/Courier0000.lzma

20150130T205424 [CBIT]:No ground fault detected

20150130T205447 [IBIT]:Communications Status:#Fix Status: 1#Iridium Signal Strength: 3#Latitude: 36.804211 Longitude: -121.786407

20150130T205448 [IBIT]:Warning: Battery Data not active. Expected only when running primaries. Threshold checking not active.

20150130T205448 [IBIT]:bitPressureThreshold: 0.750000 psi

20150130T205452 mission has been running for 1.946613 min

20150130T205559 [DVL_micro]:DVL failed to acquire valid data within timeout.

20150130T205559 [DVL_micro]:Data Fault

20150130T205559 [CBIT]:Data Fault in component: DVL_micro

20150130T205609 [DVL_micro]:LCB fault: Software Overcurrent.

20150130T205609 [DVL_micro]:Hardware Fault

20150130T205627 [BPC1]:Failed to receive battery data

20150130T205627 [BPC1]:Communications Fault

20150130T205627 [CBIT]:Communications Fault in component: BPC1

20150130T205832 [BPC1]:Failed to receive battery data

20150130T205832 [BPC1]:Communications Fault

20150130T205832 [CBIT]:Communications Fault in component: BPC1

20150130T205924 [NAL9602]:Buffer populated but no message sent from NAL9602. Error code: 0

20150130T205933 [NAL9602]:Buffer populated but no message sent from NAL9602. Error code: 0

20150130T205945 [NAL9602]:Buffer populated but no message sent from NAL9602. Error code: 0

20150130T205950 mission has been running for 6.952750 min

20150130T210059 [NAL9602]:Failed to initiate SBD session. Error code: 2

20150130T210116 [BPC1]:Failed to receive battery data

20150130T210116 [BPC1]:Communications Fault

20150130T210116 [CBIT]:Communications Fault in component: BPC1

20150130T210414 [NAL9602]:MT Queue status failed to be acquired within timeout. Will not retry this session.

20150130T210450 mission has been running for 11.955398 min

20150130T210506 [NAL9602]:Queried for signal strength and failed to receive proper response. no error

20150130T210506 [NAL9602]:received: ##COMMAND MODE: Started####COMMAND MODE: Ready for Input##

20150130T210506 [CBIT]:Data Fault in component: NAL9602

20150130T210728 [BPC1]:B bank: No match for serial number:5911 was found in the onboard configuration.

20150130T210728 [BPC1]:Failed to parse bank B battery data

20150130T210909 [BPC1]:B bank expecting battery number:1 and read number: uart

20150130T210909 [BPC1]:Failed to parse bank B battery data

20150130T211304 [Depth_Keller]:Pressure reading out of range: 1830.694946 decibar

20150130T211352 [NAL9602]:GPS failed to acquire within timeout.

20150130T211352 [CBIT]:Data Fault in component: NAL9602

20150130T211443 [NAL9602]:Failed to receive proper response when querying signal strength for MT queue check.

20150130T211443 [CBIT]:Data Fault in component: NAL9602

20150130T211619 [BPC1]:B bank: No match for serial number:5911 was found in the onboard configuration.

20150130T211639 [DVL_micro]:DVL Failure: Failed to read in all data items. Got 35 of 46

20150130T211913 [NAL9602]:MT Queue status failed to be acquired within timeout. Will not retry this session.

20150130T211933 [BPC1]:A bank expecting battery number:1 and read number: uart

20150130T211933 [BPC1]:Failed to parse bank A battery data

20150130T211958 [Depth_Keller]:Pressure reading out of range: 1355.175415 decibar

20150130T212023 [Depth_Keller]:Pressure reading out of range: 1830.675781 decibar

20150130T212341 [NAL9602]:Failed to receive proper response when querying signal strength for MT queue check.

20150130T212408 [BPC1]:B bank expecting battery number:1 and read number: uart

20150130T212814 [CommandLine]:got command restart application