2015-01-29T23:41:38.620Z,1422574898.620 [Supervisor](DEBUG): Initializing supervisor.
2015-01-29T23:41:38.623Z,1422574898.623 [SyncHandler](DEBUG): Created PCaller Thread at 4034C4E0
2015-01-29T23:41:38.623Z,1422574898.623 [SyncHandler](INFO): Protected caller Thread ID is 3248
2015-01-29T23:41:38.624Z,1422574898.624 [ComponentRegistry](DEBUG): Component "controlThread" handled in its own thread.
2015-01-29T23:41:38.625Z,1422574898.625 [controlThread ThreadHandler](DEBUG): Created PCaller Thread at 4037C4E0
2015-01-29T23:41:38.625Z,1422574898.625 [controlThread ThreadHandler](INFO): Protected caller Thread ID is 3249
2015-01-29T23:41:38.628Z,1422574898.628 [ComponentRegistry](DEBUG): SyncComponent "CycleStarter" handled in the control thread.
2015-01-29T23:41:38.650Z,1422574898.650 [ComponentRegistry](DEBUG): Component "CommandLine" handled in its own thread.
2015-01-29T23:41:38.651Z,1422574898.651 [CommandLine ThreadHandler](DEBUG): Created PCaller Thread at 403AC4E0
2015-01-29T23:41:38.651Z,1422574898.651 [CommandLine ThreadHandler](INFO): Protected caller Thread ID is 3250
2015-01-29T23:41:38.652Z,1422574898.652 [ComponentRegistry](DEBUG): Component "logger" handled in its own thread.
2015-01-29T23:41:38.653Z,1422574898.653 [logger ThreadHandler](DEBUG): Created PCaller Thread at 403DC4E0
2015-01-29T23:41:38.654Z,1422574898.654 [logger ThreadHandler](INFO): Protected caller Thread ID is 3251
2015-01-29T23:41:38.656Z,1422574898.656 [ComponentRegistry](DEBUG): SyncComponent "LogSplitter" handled in the control thread.
2015-01-29T23:41:38.656Z,1422574898.656 [Supervisor](INFO): Looking for Config files in directory: Config/
2015-01-29T23:41:38.658Z,1422574898.658 [Supervisor](INFO): Opening Config file at: Config/Control.cfg
2015-01-29T23:41:39.152Z,1422574899.152 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Control
2015-01-29T23:41:39.153Z,1422574899.153 [Supervisor](INFO): Opening Config file at: Config/BIT.cfg
2015-01-29T23:41:39.318Z,1422574899.318 [ComponentRegistry](DEBUG): Loaded Config Component "Config/BIT
2015-01-29T23:41:39.319Z,1422574899.319 [Supervisor](INFO): Opening Config file at: Config/Derivation.cfg
2015-01-29T23:41:39.431Z,1422574899.431 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Derivation
2015-01-29T23:41:39.432Z,1422574899.432 [Supervisor](INFO): Opening Config file at: Config/Estimation.cfg
2015-01-29T23:41:39.559Z,1422574899.559 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Estimation
2015-01-29T23:41:39.560Z,1422574899.560 [Supervisor](INFO): Opening Config file at: Config/Guidance.cfg
2015-01-29T23:41:39.650Z,1422574899.650 [Supervisor](INFO): Opening Config file at: Config/Navigation.cfg
2015-01-29T23:41:39.814Z,1422574899.814 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Navigation
2015-01-29T23:41:39.815Z,1422574899.815 [Supervisor](INFO): Opening Config file at: Config/Sample.cfg
2015-01-29T23:41:39.905Z,1422574899.905 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Sample
2015-01-29T23:41:39.906Z,1422574899.906 [Supervisor](INFO): Opening Config file at: Config/Science.cfg
2015-01-29T23:41:40.116Z,1422574900.116 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Science
2015-01-29T23:41:40.117Z,1422574900.117 [Supervisor](INFO): Opening Config file at: Config/Sensor.cfg
2015-01-29T23:41:40.484Z,1422574900.484 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Sensor
2015-01-29T23:41:40.484Z,1422574900.484 [Supervisor](INFO): Opening Config file at: Config/Servo.cfg
2015-01-29T23:41:40.795Z,1422574900.795 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Servo
2015-01-29T23:41:40.796Z,1422574900.796 [Supervisor](INFO): Opening Config file at: Config/Simulator.cfg
2015-01-29T23:41:41.319Z,1422574901.319 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Simulator
2015-01-29T23:41:41.320Z,1422574901.320 [Supervisor](INFO): Opening Config file at: Config/logger.cfg
2015-01-29T23:41:41.529Z,1422574901.529 [ComponentRegistry](DEBUG): Loaded Config Component "Config/logger
2015-01-29T23:41:41.530Z,1422574901.530 [Supervisor](INFO): Opening Config file at: Config/secure.cfg
2015-01-29T23:41:41.639Z,1422574901.639 [ComponentRegistry](DEBUG): Loaded Config Component "Config/secure
2015-01-29T23:41:41.640Z,1422574901.640 [Supervisor](INFO): Opening Config file at: Config/vehicle.cfg
2015-01-29T23:41:42.064Z,1422574902.064 [ComponentRegistry](DEBUG): Loaded Config Component "Config/vehicle
2015-01-29T23:41:42.065Z,1422574902.065 [Supervisor](INFO): Opening Config file at: Config/workSite.cfg
2015-01-29T23:41:42.285Z,1422574902.285 [ComponentRegistry](DEBUG): Loaded Config Component "Config/workSite
2015-01-29T23:41:42.287Z,1422574902.287 [Supervisor](INFO): Looking for Config files in directory: Config/lrauv-daphne/
2015-01-29T23:41:42.288Z,1422574902.288 [Supervisor](INFO): Opening Config file at: Config/lrauv-daphne/Control.cfg
2015-01-29T23:41:42.397Z,1422574902.397 [Supervisor](INFO): Opening Config file at: Config/lrauv-daphne/BIT.cfg
2015-01-29T23:41:42.519Z,1422574902.519 [Supervisor](INFO): Opening Config file at: Config/lrauv-daphne/logger.cfg
2015-01-29T23:41:42.621Z,1422574902.621 [Supervisor](INFO): Opening Config file at: Config/lrauv-daphne/Estimation.cfg
2015-01-29T23:41:42.734Z,1422574902.734 [Supervisor](INFO): Opening Config file at: Config/lrauv-daphne/Navigation.cfg
2015-01-29T23:41:42.836Z,1422574902.836 [Supervisor](INFO): Opening Config file at: Config/lrauv-daphne/Science.cfg
2015-01-29T23:41:42.969Z,1422574902.969 [Supervisor](INFO): Opening Config file at: Config/lrauv-daphne/Sensor.cfg
2015-01-29T23:41:43.127Z,1422574903.127 [Supervisor](INFO): Opening Config file at: Config/lrauv-daphne/Servo.cfg
2015-01-29T23:41:43.233Z,1422574903.233 [Supervisor](INFO): Opening Config file at: Config/lrauv-daphne/Simulator.cfg
2015-01-29T23:41:43.328Z,1422574903.328 [Supervisor](INFO): Opening Config file at: Config/lrauv-daphne/workSite.cfg
2015-01-29T23:41:43.414Z,1422574903.414 [Supervisor](INFO): Opening Config file at: Config/lrauv-daphne/secure.cfg
2015-01-29T23:41:43.515Z,1422574903.515 [Supervisor](INFO): Opening Config file at: Config/lrauv-daphne/vehicle.cfg
2015-01-29T23:41:43.634Z,1422574903.634 [Supervisor](INFO): Opening Config file at: Config/lrauv-daphne/Battery.cfg
2015-01-29T23:41:43.877Z,1422574903.877 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Battery
2015-01-29T23:41:43.878Z,1422574903.878 [Supervisor](INFO): Looking for Config files in directory: Config/lrauv-daphne/LOGIN/
2015-01-29T23:41:43.879Z,1422574903.879 [Supervisor](IMPORTANT): Reading configuration overrides from Data/persisted.cfg
2015-01-29T23:41:43.895Z,1422574903.895 [Module Loader](DEBUG): Loading Module at Modules/Control.so
2015-01-29T23:41:43.946Z,1422574903.946 [VerticalControl](DEBUG): Construct VerticalControl.
2015-01-29T23:41:44.065Z,1422574904.065 [VerticalControl] Loaded
2015-01-29T23:41:44.066Z,1422574904.066 [ComponentRegistry](DEBUG): SyncComponent "VerticalControl" handled in the control thread.
2015-01-29T23:41:44.066Z,1422574904.066 [HorizontalControl](DEBUG): Construct HorizontalControl.
2015-01-29T23:41:44.138Z,1422574904.138 [HorizontalControl] Loaded
2015-01-29T23:41:44.139Z,1422574904.139 [ComponentRegistry](DEBUG): SyncComponent "HorizontalControl" handled in the control thread.
2015-01-29T23:41:44.139Z,1422574904.139 [SpeedControl](DEBUG): Construct SpeedControl.
2015-01-29T23:41:44.145Z,1422574904.145 [SpeedControl] Loaded
2015-01-29T23:41:44.146Z,1422574904.146 [ComponentRegistry](DEBUG): SyncComponent "SpeedControl" handled in the control thread.
2015-01-29T23:41:44.146Z,1422574904.146 [LoopControl](DEBUG): Construct LoopControl.
2015-01-29T23:41:44.147Z,1422574904.147 [LoopControl] Loaded
2015-01-29T23:41:44.147Z,1422574904.147 [ComponentRegistry](DEBUG): SyncComponent "LoopControl" handled in the control thread.
2015-01-29T23:41:44.148Z,1422574904.148 [Module Loader](DEBUG): Loaded Module: Control (Contains the Control components, such as Depth, Heading, and Speed Control)
2015-01-29T23:41:44.148Z,1422574904.148 [Module Loader](DEBUG): Loading Module at Modules/BIT.so
2015-01-29T23:41:44.249Z,1422574904.249 [SBIT](DEBUG): Construct Startup Built In Test.
2015-01-29T23:41:44.260Z,1422574904.260 [SBIT] Loaded
2015-01-29T23:41:44.260Z,1422574904.260 [ComponentRegistry](DEBUG): SyncComponent "SBIT" handled in the control thread.
2015-01-29T23:41:44.261Z,1422574904.261 [IBIT](DEBUG): Construct Initiated Built In Test.
2015-01-29T23:41:44.290Z,1422574904.290 [IBIT] Loaded
2015-01-29T23:41:44.291Z,1422574904.291 [ComponentRegistry](DEBUG): SyncComponent "IBIT" handled in the control thread.
2015-01-29T23:41:44.293Z,1422574904.293 [CBIT](DEBUG): Construct CBIT Built In Test.
2015-01-29T23:41:44.425Z,1422574904.425 [CBIT] Loaded
2015-01-29T23:41:44.425Z,1422574904.425 [ComponentRegistry](DEBUG): SyncComponent "CBIT" handled in the control thread.
2015-01-29T23:41:44.425Z,1422574904.425 [Module Loader](DEBUG): Loaded Module: BIT (Contains the BuiltInTest components, such as C Built In Test)
2015-01-29T23:41:44.426Z,1422574904.426 [Module Loader](DEBUG): Loading Module at Modules/Derivation.so
2015-01-29T23:41:44.444Z,1422574904.444 [DepthRateCalculator] Loaded
2015-01-29T23:41:44.445Z,1422574904.445 [ComponentRegistry](DEBUG): SyncComponent "DepthRateCalculator" handled in the control thread.
2015-01-29T23:41:44.450Z,1422574904.450 [PitchRateCalculator] Loaded
2015-01-29T23:41:44.450Z,1422574904.450 [ComponentRegistry](DEBUG): SyncComponent "PitchRateCalculator" handled in the control thread.
2015-01-29T23:41:44.462Z,1422574904.462 [SpeedCalculator] Loaded
2015-01-29T23:41:44.462Z,1422574904.462 [ComponentRegistry](DEBUG): SyncComponent "SpeedCalculator" handled in the control thread.
2015-01-29T23:41:44.479Z,1422574904.479 [TempGradientCalculator] Loaded
2015-01-29T23:41:44.479Z,1422574904.479 [ComponentRegistry](DEBUG): SyncComponent "TempGradientCalculator" handled in the control thread.
2015-01-29T23:41:44.485Z,1422574904.485 [YawRateCalculator] Loaded
2015-01-29T23:41:44.485Z,1422574904.485 [ComponentRegistry](DEBUG): SyncComponent "YawRateCalculator" handled in the control thread.
2015-01-29T23:41:44.485Z,1422574904.485 [Module Loader](DEBUG): Loaded Module: Derivation (Contains the base derivation components)
2015-01-29T23:41:44.486Z,1422574904.486 [Module Loader](DEBUG): Loading Module at Modules/Estimation.so
2015-01-29T23:41:49.287Z,1422574909.287 [HFRadarModelCalc] Loaded
2015-01-29T23:41:49.287Z,1422574909.287 [ComponentRegistry](DEBUG): SyncComponent "HFRadarModelCalc" handled in the control thread.
2015-01-29T23:41:53.112Z,1422574913.112 [HFRadarCompactModelForecaster] Loaded
2015-01-29T23:41:53.112Z,1422574913.112 [ComponentRegistry](DEBUG): SyncComponent "HFRadarCompactModelForecaster" handled in the control thread.
2015-01-29T23:41:54.045Z,1422574914.045 [HFRCMSpaceInterpolator] Loaded
2015-01-29T23:41:54.045Z,1422574914.045 [ComponentRegistry](DEBUG): SyncComponent "HFRCMSpaceInterpolator" handled in the control thread.
2015-01-29T23:41:54.048Z,1422574914.048 [HFRCMTimeInterpolator] Loaded
2015-01-29T23:41:54.048Z,1422574914.048 [ComponentRegistry](DEBUG): SyncComponent "HFRCMTimeInterpolator" handled in the control thread.
2015-01-29T23:41:55.015Z,1422574915.015 [HFRCMReconstructedInterpolator] Loaded
2015-01-29T23:41:55.016Z,1422574915.016 [ComponentRegistry](DEBUG): SyncComponent "HFRCMReconstructedInterpolator" handled in the control thread.
2015-01-29T23:41:55.028Z,1422574915.028 [HFRCMSurfaceCurrentAtVehicleLocation] Loaded
2015-01-29T23:41:55.028Z,1422574915.028 [ComponentRegistry](DEBUG): SyncComponent "HFRCMSurfaceCurrentAtVehicleLocation" handled in the control thread.
2015-01-29T23:41:55.055Z,1422574915.055 [HFRCMVirtualSurfaceDrifter] Loaded
2015-01-29T23:41:55.055Z,1422574915.055 [ComponentRegistry](DEBUG): SyncComponent "HFRCMVirtualSurfaceDrifter" handled in the control thread.
2015-01-29T23:41:55.056Z,1422574915.056 [Module Loader](DEBUG): Loaded Module: Estimation (Contains the base estimation components)
2015-01-29T23:41:55.056Z,1422574915.056 [Module Loader](DEBUG): Loading Module at Modules/Guidance.so
2015-01-29T23:41:55.289Z,1422574915.289 [Module Loader](DEBUG): Loaded Module: Guidance (Contains behaviors and commands)
2015-01-29T23:41:55.289Z,1422574915.289 [Module Loader](DEBUG): Loading Module at Modules/Navigation.so
2015-01-29T23:41:55.376Z,1422574915.376 [DeadReckonUsingMultipleVelocitySources] Loaded
2015-01-29T23:41:55.377Z,1422574915.377 [ComponentRegistry](DEBUG): SyncComponent "DeadReckonUsingMultipleVelocitySources" handled in the control thread.
2015-01-29T23:41:55.423Z,1422574915.423 [DeadReckonUsingSpeedCalculator] Loaded
2015-01-29T23:41:55.424Z,1422574915.424 [ComponentRegistry](DEBUG): SyncComponent "DeadReckonUsingSpeedCalculator" handled in the control thread.
2015-01-29T23:41:55.470Z,1422574915.470 [DeadReckonWithRespectToWater] Loaded
2015-01-29T23:41:55.470Z,1422574915.470 [ComponentRegistry](DEBUG): SyncComponent "DeadReckonWithRespectToWater" handled in the control thread.
2015-01-29T23:41:55.518Z,1422574915.518 [DeadReckonWithRespectToSeafloor] Loaded
2015-01-29T23:41:55.518Z,1422574915.518 [ComponentRegistry](DEBUG): SyncComponent "DeadReckonWithRespectToSeafloor" handled in the control thread.
2015-01-29T23:41:55.570Z,1422574915.570 [DeadReckonUsingDVLWaterTrack] Loaded
2015-01-29T23:41:55.570Z,1422574915.570 [ComponentRegistry](DEBUG): SyncComponent "DeadReckonUsingDVLWaterTrack" handled in the control thread.
2015-01-29T23:41:55.618Z,1422574915.618 [DeadReckonUsingCompactModelForecast] Loaded
2015-01-29T23:41:55.619Z,1422574915.619 [ComponentRegistry](DEBUG): SyncComponent "DeadReckonUsingCompactModelForecast" handled in the control thread.
2015-01-29T23:41:55.635Z,1422574915.635 [NavChart] Loaded
2015-01-29T23:41:55.636Z,1422574915.636 [ComponentRegistry](DEBUG): SyncComponent "NavChart" handled in the control thread.
2015-01-29T23:41:55.640Z,1422574915.640 [UniversalFixResidualReporter] Loaded
2015-01-29T23:41:55.640Z,1422574915.640 [ComponentRegistry](DEBUG): SyncComponent "UniversalFixResidualReporter" handled in the control thread.
2015-01-29T23:41:55.641Z,1422574915.641 [Module Loader](DEBUG): Loaded Module: Navigation (Contains the base navigation components)
2015-01-29T23:41:55.641Z,1422574915.641 [Module Loader](DEBUG): Loading Module at Modules/Sample.so
2015-01-29T23:41:55.647Z,1422574915.647 [Module Loader](DEBUG): Loaded Module: Sample (This is a Sample Module of Sample Components)
2015-01-29T23:41:55.648Z,1422574915.648 [Module Loader](DEBUG): Loading Module at Modules/Science.so
2015-01-29T23:41:55.823Z,1422574915.823 [Aanderaa_O2] Loaded
2015-01-29T23:41:55.823Z,1422574915.823 [ComponentRegistry](DEBUG): SyncComponent "Aanderaa_O2" handled in the control thread.
2015-01-29T23:41:55.861Z,1422574915.861 [CTD_NeilBrown] Loaded
2015-01-29T23:41:55.861Z,1422574915.861 [ComponentRegistry](DEBUG): Component "CTD_NeilBrown" handled in its own thread.
2015-01-29T23:41:55.862Z,1422574915.862 [CTD_NeilBrown ThreadHandler](DEBUG): Created PCaller Thread at 407D34E0
2015-01-29T23:41:55.862Z,1422574915.862 [CTD_NeilBrown ThreadHandler](INFO): Protected caller Thread ID is 3336
2015-01-29T23:41:55.876Z,1422574915.876 [ISUS] Loaded
2015-01-29T23:41:55.876Z,1422574915.876 [ComponentRegistry](DEBUG): SyncComponent "ISUS" handled in the control thread.
2015-01-29T23:41:55.891Z,1422574915.891 [PAR_Licor] Loaded
2015-01-29T23:41:55.891Z,1422574915.891 [ComponentRegistry](DEBUG): SyncComponent "PAR_Licor" handled in the control thread.
2015-01-29T23:41:55.927Z,1422574915.927 [WetLabsBB2FL] Loaded
2015-01-29T23:41:55.927Z,1422574915.927 [ComponentRegistry](DEBUG): Component "WetLabsBB2FL" handled in its own thread.
2015-01-29T23:41:55.928Z,1422574915.928 [WetLabsBB2FL ThreadHandler](DEBUG): Created PCaller Thread at 408034E0
2015-01-29T23:41:55.929Z,1422574915.929 [WetLabsBB2FL ThreadHandler](INFO): Protected caller Thread ID is 3337
2015-01-29T23:41:55.929Z,1422574915.929 [Module Loader](DEBUG): Loaded Module: Science (Contains the science components)
2015-01-29T23:41:55.930Z,1422574915.930 [Module Loader](DEBUG): Loading Module at Modules/Sensor.so
2015-01-29T23:41:56.248Z,1422574916.248 [AHRS_sp3003D] Loaded
2015-01-29T23:41:56.248Z,1422574916.248 [ComponentRegistry](DEBUG): SyncComponent "AHRS_sp3003D" handled in the control thread.
2015-01-29T23:41:56.320Z,1422574916.320 [DataOverHttps] Loaded
2015-01-29T23:41:56.321Z,1422574916.321 [ComponentRegistry](DEBUG): SyncComponent "DataOverHttps" handled in the control thread.
2015-01-29T23:41:56.334Z,1422574916.334 [Depth_Keller] Loaded
2015-01-29T23:41:56.335Z,1422574916.335 [ComponentRegistry](DEBUG): SyncComponent "Depth_Keller" handled in the control thread.
2015-01-29T23:41:56.340Z,1422574916.340 [DropWeight] Loaded
2015-01-29T23:41:56.340Z,1422574916.340 [ComponentRegistry](DEBUG): SyncComponent "DropWeight" handled in the control thread.
2015-01-29T23:41:56.475Z,1422574916.475 [DVL_micro] Loaded
2015-01-29T23:41:56.476Z,1422574916.476 [ComponentRegistry](DEBUG): SyncComponent "DVL_micro" handled in the control thread.
2015-01-29T23:41:56.572Z,1422574916.572 [NAL9602] Loaded
2015-01-29T23:41:56.572Z,1422574916.572 [ComponentRegistry](DEBUG): SyncComponent "NAL9602" handled in the control thread.
2015-01-29T23:41:56.615Z,1422574916.615 [Onboard] Loaded
2015-01-29T23:41:56.615Z,1422574916.615 [ComponentRegistry](DEBUG): SyncComponent "Onboard" handled in the control thread.
2015-01-29T23:41:56.622Z,1422574916.622 [Radio_Surface] Loaded
2015-01-29T23:41:56.623Z,1422574916.623 [ComponentRegistry](DEBUG): Component "Radio_Surface" handled in its own thread.
2015-01-29T23:41:56.624Z,1422574916.624 [Radio_Surface ThreadHandler](DEBUG): Created PCaller Thread at 40A524E0
2015-01-29T23:41:56.624Z,1422574916.624 [Radio_Surface ThreadHandler](INFO): Protected caller Thread ID is 3338
2015-01-29T23:41:58.545Z,1422574918.545 [BPC1] Loaded
2015-01-29T23:41:58.545Z,1422574918.545 [ComponentRegistry](DEBUG): SyncComponent "BPC1" handled in the control thread.
2015-01-29T23:41:58.545Z,1422574918.545 [Module Loader](DEBUG): Loaded Module: Sensor (Contains the sensor components)
2015-01-29T23:41:58.546Z,1422574918.546 [Module Loader](DEBUG): Loading Module at Modules/Servo.so
2015-01-29T23:41:58.652Z,1422574918.652 [BuoyancyServo] Loaded
2015-01-29T23:41:58.652Z,1422574918.652 [ComponentRegistry](DEBUG): SyncComponent "BuoyancyServo" handled in the control thread.
2015-01-29T23:41:58.664Z,1422574918.664 [ElevatorServo] Loaded
2015-01-29T23:41:58.665Z,1422574918.665 [ComponentRegistry](DEBUG): SyncComponent "ElevatorServo" handled in the control thread.
2015-01-29T23:41:58.677Z,1422574918.677 [MassServo] Loaded
2015-01-29T23:41:58.677Z,1422574918.677 [ComponentRegistry](DEBUG): SyncComponent "MassServo" handled in the control thread.
2015-01-29T23:41:58.689Z,1422574918.689 [RudderServo] Loaded
2015-01-29T23:41:58.689Z,1422574918.689 [ComponentRegistry](DEBUG): SyncComponent "RudderServo" handled in the control thread.
2015-01-29T23:41:58.701Z,1422574918.701 [ThrusterServo] Loaded
2015-01-29T23:41:58.701Z,1422574918.701 [ComponentRegistry](DEBUG): SyncComponent "ThrusterServo" handled in the control thread.
2015-01-29T23:41:58.701Z,1422574918.701 [Module Loader](DEBUG): Loaded Module: Servo (This is the module containing motor controllers)
2015-01-29T23:41:58.702Z,1422574918.702 [Module Loader](DEBUG): Loading Module at Modules/Simulator.so
2015-01-29T23:41:58.807Z,1422574918.807 [Module Loader](DEBUG): Loaded Module: Simulator (This is the module containing the Simulator)
2015-01-29T23:41:58.807Z,1422574918.807 [Module Loader](DEBUG): Loading Module at Modules/Trigger.so
2015-01-29T23:41:58.832Z,1422574918.832 [Module Loader](DEBUG): Loaded Module: Trigger (Contains triggers for use in missions)
2015-01-29T23:41:58.834Z,1422574918.834 [ComponentRegistry](DEBUG): SyncComponent "MissionManager" handled in the control thread.
2015-01-29T23:41:58.835Z,1422574918.835 [ComponentRegistry](DEBUG): SyncComponent "Reporter" handled in the control thread.
2015-01-29T23:41:58.841Z,1422574918.841 [ComponentRegistry](DEBUG): Component "NavChartDb" handled in its own thread.
2015-01-29T23:41:58.842Z,1422574918.842 [NavChartDb ThreadHandler](DEBUG): Created PCaller Thread at 40B034E0
2015-01-29T23:41:58.843Z,1422574918.843 [NavChartDb ThreadHandler](INFO): Protected caller Thread ID is 3339
2015-01-29T23:41:58.848Z,1422574918.848 [Supervisor](INFO): Main Thread ID is 2800
2015-01-29T23:41:58.848Z,1422574918.848 [Supervisor](DEBUG): Running supervisor.
2015-01-29T23:41:58.849Z,1422574918.849 [CommandLine ThreadHandler](INFO): Handler Thread ID is 3340
2015-01-29T23:41:58.851Z,1422574918.851 [controlThread ThreadHandler](INFO): Handler Thread ID is 3341
2015-01-29T23:41:58.851Z,1422574918.851 [controlThread](DEBUG): Initializing ControlThread
2015-01-29T23:41:58.852Z,1422574918.852 [VerticalControl](DEBUG): Initialize VerticalControlComponent.
2015-01-29T23:41:58.854Z,1422574918.854 [HorizontalControl](DEBUG): Initialize HorizontalControlComponent.
2015-01-29T23:41:58.855Z,1422574918.855 [SpeedControl](DEBUG): Initialize SpeedControlComponent.
2015-01-29T23:41:58.855Z,1422574918.855 [LoopControl](DEBUG): Initialize LoopControlComponent.
2015-01-29T23:41:58.855Z,1422574918.855 [SBIT](INFO): Initialize SBIT Component.
2015-01-29T23:41:58.856Z,1422574918.856 [SBIT](IMPORTANT): Tethys CM Info: SVN revision:11990
2015-01-29T23:41:58.856Z,1422574918.856 [SBIT](IMPORTANT): Kernel Release: 2.6.27.8
2015-01-29T23:41:58.857Z,1422574918.857 [SBIT](IMPORTANT): Kernel Version:#639 PREEMPT Wed Mar 12 12:53:33 PDT 2014
2015-01-29T23:41:58.857Z,1422574918.857 [IBIT](INFO): Initialize IBIT Component.
2015-01-29T23:41:58.858Z,1422574918.858 [CBIT](DEBUG): Initialize CBIT Component.
2015-01-29T23:41:58.858Z,1422574918.858 [CBIT](INFO): Last reboot was NOT due to watchdog timer.
2015-01-29T23:41:58.859Z,1422574918.859 [logger ThreadHandler](INFO): Handler Thread ID is 3342
2015-01-29T23:41:58.884Z,1422574918.884 [DepthRateCalculator](DEBUG): Initializing DepthRateCalculator.
2015-01-29T23:41:58.885Z,1422574918.885 [PitchRateCalculator](DEBUG): Initializing PitchRateCalculator.
2015-01-29T23:41:58.885Z,1422574918.885 [SpeedCalculator](DEBUG): Initializing SpeedCalculator.
2015-01-29T23:41:58.885Z,1422574918.885 [TempGradientCalculator](DEBUG): Initializing TempGradientCalculator.
2015-01-29T23:41:58.886Z,1422574918.886 [YawRateCalculator](DEBUG): Initializing YawRateCalculator.
2015-01-29T23:41:58.893Z,1422574918.893 [HFRadarCompactModelForecaster](DEBUG): Found new ECs!
2015-01-29T23:41:58.893Z,1422574918.893 [HFRadarCompactModelForecaster](ERROR): Most recent ECs are more than six hours old.
2015-01-29T23:41:58.895Z,1422574918.895 [CTD_NeilBrown ThreadHandler](INFO): Handler Thread ID is 3343
2015-01-29T23:41:58.896Z,1422574918.896 [CTD_NeilBrown](DEBUG): Initializing CTD_NeilBrown.
2015-01-29T23:41:58.903Z,1422574918.903 [CTD_NeilBrown](INFO): Opening uart, block timeout 10ths=4
2015-01-29T23:41:58.919Z,1422574918.919 [WetLabsBB2FL ThreadHandler](INFO): Handler Thread ID is 3345
2015-01-29T23:41:58.923Z,1422574918.923 [WetLabsBB2FL](INFO): Powering down
2015-01-29T23:41:58.953Z,1422574918.953 [Radio_Surface ThreadHandler](INFO): Handler Thread ID is 3346
2015-01-29T23:41:58.959Z,1422574918.959 [Radio_Surface](INFO): Powering up
2015-01-29T23:41:58.969Z,1422574918.969 [NavChartDb ThreadHandler](INFO): Handler Thread ID is 3347
2015-01-29T23:41:58.971Z,1422574918.971 [NavChartDb](INFO): Looking for Electronic Nav Chart files in directory: Resources
2015-01-29T23:41:58.972Z,1422574918.972 [NavChartDb](INFO): Already Loaded Electronic Nav Chart data from US1WC07M.000
2015-01-29T23:41:58.973Z,1422574918.973 [NavChartDb](INFO): Already Loaded Electronic Nav Chart data from US2WC11M.000
2015-01-29T23:41:58.973Z,1422574918.973 [NavChartDb](INFO): Already Loaded Electronic Nav Chart data from US3CA52M.000
2015-01-29T23:41:58.973Z,1422574918.973 [NavChartDb](INFO): Already Loaded Electronic Nav Chart data from US4CA60M.000
2015-01-29T23:41:58.973Z,1422574918.973 [NavChartDb](INFO): Already Loaded Electronic Nav Chart data from US5CA50M.000
2015-01-29T23:41:58.974Z,1422574918.974 [NavChartDb](INFO): Already Loaded Electronic Nav Chart data from US5CA61M.000
2015-01-29T23:41:58.974Z,1422574918.974 [NavChartDb](INFO): Already Loaded Electronic Nav Chart data from US5CA62M.000
2015-01-29T23:41:58.974Z,1422574918.974 [NavChartDb](INFO): Already Loaded Electronic Nav Chart data from US5CA83M.000
2015-01-29T23:42:07.601Z,1422574927.601 [HFRadarCompactModelForecaster](IMPORTANT): forecast time 201501152200 published
2015-01-29T23:42:07.622Z,1422574927.622 [HFRCMSpaceInterpolator](DEBUG): Initializing HFRCMSpaceInterpolator component with verbosity level 0.
2015-01-29T23:42:07.623Z,1422574927.623 [HFRCMTimeInterpolator](DEBUG): Initializing HFRCMTimeInterpolator component.
2015-01-29T23:42:07.624Z,1422574927.624 [HFRCMReconstructedInterpolator](INFO): Initializing HFRCMReconstructedInterpolator component with velocityAccuracy_ = 0.300000 m/s.
2015-01-29T23:42:07.625Z,1422574927.625 [HFRCMSurfaceCurrentAtVehicleLocation](DEBUG): Initializing HFRCMSurfaceCurrentAtVehicleLocation component.
2015-01-29T23:42:07.626Z,1422574927.626 [HFRCMVirtualSurfaceDrifter](DEBUG): Initializing HFRCMVirtualSurfaceDrifter component.
2015-01-29T23:42:07.626Z,1422574927.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2015-01-29T23:42:07.627Z,1422574927.627 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2015-01-29T23:42:07.627Z,1422574927.627 [DeadReckonWithRespectToWater](DEBUG): Initializing DeadReckonWithRespectToWater component.
2015-01-29T23:42:07.627Z,1422574927.627 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2015-01-29T23:42:07.628Z,1422574927.628 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2015-01-29T23:42:07.628Z,1422574927.628 [DeadReckonUsingCompactModelForecast](DEBUG): Initializing DeadReckonUsingCompactModelForecast component.
2015-01-29T23:42:07.629Z,1422574927.629 [NavChart](DEBUG): Initialize NavChart Navigation.
2015-01-29T23:42:07.629Z,1422574927.629 [UniversalFixResidualReporter](DEBUG): Initializing UniversalFixResidualReporter component.
2015-01-29T23:42:07.640Z,1422574927.640 [DropWeight](CRITICAL): DROP WEIGHT MISSING.

2015-01-29T23:42:07.641Z,1422574927.641 [DropWeight] Hardware Fault, FailCount= 1
2015-01-29T23:42:07.641Z,1422574927.641 [DropWeight](ERROR): Hardware Fault
2015-01-29T23:42:07.644Z,1422574927.644 [MissionManager](INFO): Loading Mission: Missions/Startup.xml
2015-01-29T23:42:07.675Z,1422574927.675 [Startup:A.GoToSurface](DEBUG): Construct GoToSurface.
2015-01-29T23:42:07.698Z,1422574927.698 [MissionManager](DEBUG): 
<?xml version="1.0" encoding="UTF-8"?>
<Mission xmlns="Tethys"
       xmlns:Control="Tethys/Control"
       xmlns:Guidance="Tethys/Guidance" 
       xmlns:Units="Tethys/Units"
       xmlns:Universal="Tethys/Universal"
       xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
       xsi:schemaLocation="Tethys http://aosn.mbari.org/tethys/Xml/Tethys.xsd
                           Tethys/Control http://aosn.mbari.org/tethys/Xml/Control.xsd
                           Tethys/Guidance http://aosn.mbari.org/tethys/Xml/Guidance.xsd
                           Tethys/Units http://aosn.mbari.org/tethys/Xml/Units.xsd
                           Tethys/Universal http://aosn.mbari.org/tethys/Xml/Universal.xsd"
       Id="Startup">

    <Guidance:GoToSurface>
        <Progression/>
    </Guidance:GoToSurface>

    <Aggregate Id="StartupSatComms">

        <Sequence/>

        <ReadDatum>
            <Timeout Duration="P1M" />
            <Universal:latitude_fix/>
        </ReadDatum>

        <ReadDatum>
            <Timeout Duration="P1M" />
            <Universal:platform_communications/>
        </ReadDatum>

    </Aggregate>

</Mission>


2015-01-29T23:42:07.699Z,1422574927.699 [MissionManager](INFO): Loading Mission: Missions/Default.xml
2015-01-29T23:42:07.777Z,1422574927.777 [MissionManager](INFO): DefineArg Default.TimeMissionWasStarted = 0.000000 h
2015-01-29T23:42:07.797Z,1422574927.797 [MissionManager](INFO): DefineArg Default.ElapsedSinceMissionWasStarted = 0.000000 h
2015-01-29T23:42:07.809Z,1422574927.809 [Default:B.GoToSurface](DEBUG): Construct GoToSurface.
2015-01-29T23:42:07.838Z,1422574927.838 [Default:CheckIn:A.SetSpeed](DEBUG): Construct.
2015-01-29T23:42:07.853Z,1422574927.853 [Default:CheckIn:Read_Iridium:A_Timeout:A.Execute](DEBUG): Construct Execute.
2015-01-29T23:42:07.887Z,1422574927.887 [Default:WaitAtTheSurface:RunApplicationAtLowSpeed.SetSpeed](DEBUG): Construct.
2015-01-29T23:42:07.897Z,1422574927.897 [MissionManager](DEBUG): 
<?xml version="1.0" encoding="UTF-8"?>
<Mission xmlns="Tethys"
xmlns:Control="Tethys/Control"
xmlns:Guidance="Tethys/Guidance" 
xmlns:Units="Tethys/Units"
xmlns:Universal="Tethys/Universal"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:schemaLocation="Tethys http://aosn.mbari.org/tethys/Xml/Tethys.xsd
Tethys/Control http://aosn.mbari.org/tethys/Xml/Control.xsd
Tethys/Guidance http://aosn.mbari.org/tethys/Xml/Guidance.xsd
Tethys/Units http://aosn.mbari.org/tethys/Xml/Units.xsd
Tethys/Universal http://aosn.mbari.org/tethys/Xml/Universal.xsd"
Id="Default">

    <DefineArg Name="TimeMissionWasStarted"><Units:hour/><Value>0</Value></DefineArg>

    <DefineArg Name="ElapsedSinceMissionWasStarted"><Units:hour/><Value>0</Value></DefineArg>

    <Aggregate Id="StartClock">

        <Sequence/>

        <Assign><Arg Name="TimeMissionWasStarted"/><Universal:time/></Assign>

    </Aggregate>

    <Guidance:GoToSurface>
        <Progression/>
    </Guidance:GoToSurface>

    <Aggregate Id="CheckIn">

        <When>
            <Elapsed><Universal:platform_communications/></Elapsed>
            <Gt><Units:minute/><Value>5.0</Value></Gt>
            <And><Universal:platform_conversation/><Eq><True/></Eq></And>
            <Or><Elapsed><Universal:platform_communications/></Elapsed><Gt><Units:hour/><Value>1.0</Value></Gt></Or>
        </When>

<!-- TODO: Do we really want this When operating on platform_communications? or on something else like time_fix? -->

<!-- Run application at high speed -->

        <Guidance:SetSpeed>
            <Parallel/>
            <Setting><Guidance:SetSpeed.period/><Units:millisecond/><Value>400</Value></Setting>
        </Guidance:SetSpeed>

        <ReadDatum Id="Read_GPS">
            <Timeout Duration="P5M"/>
<!-- NOTE: Original Default.xml didn't have a timeout on the GPS read, so theoretically could have hung indefinitely there... -->
            <Universal:latitude_fix/>
        </ReadDatum>

<!-- Do data comms -->

        <ReadDatum Id="Read_Iridium">
            <Timeout Duration="P2H">
                <Guidance:Execute>
                    <Sequence/>
                    <Setting><Guidance:Execute.command/><String>Burn 300</String></Setting>
                </Guidance:Execute>
                <Syslog Severity="Critical">Dropped drop weight due to communications timeout</Syslog>
            </Timeout>
            <Universal:platform_communications/>
        </ReadDatum>

    </Aggregate>

    <Aggregate Id="UpdateAndReportMinutesSinceMissionStarted">

        <When>
            <Elapsed><Arg Name="ElapsedSinceMissionWasStarted"/></Elapsed>
            <Gt><Units:minute/><Value>5.0</Value></Gt>
        </When>

        <Assign><Arg Name="ElapsedSinceMissionWasStarted"/><Universal:time/><Sub><Arg Name="TimeMissionWasStarted"/></Sub></Assign>

        <Syslog Severity="Important">Default mission has been running for <Arg Name="ElapsedSinceMissionWasStarted"/><Units:minute/></Syslog>

    </Aggregate>

    <Aggregate Id="WaitAtTheSurface">

        <Sequence/>

        <Guidance:SetSpeed Id="RunApplicationAtLowSpeed">
            <Parallel/>
            <Setting><Guidance:SetSpeed.period/><Units:second/><Value>5</Value></Setting>
        </Guidance:SetSpeed>

    </Aggregate>

</Mission>


2015-01-29T23:42:07.905Z,1422574927.905 [controlThread](DEBUG): Component order: CycleStarter,Aanderaa_O2,ISUS,PAR_Licor,AHRS_sp3003D,DataOverHttps,Depth_Keller,DropWeight,DVL_micro,NAL9602,Onboard,BPC1,PAR_Licor,Depth_Keller,DepthRateCalculator,PitchRateCalculator,SpeedCalculator,TempGradientCalculator,YawRateCalculator,HFRadarModelCalc,HFRadarCompactModelForecaster,HFRCMSpaceInterpolator,HFRCMTimeInterpolator,HFRCMReconstructedInterpolator,HFRCMSurfaceCurrentAtVehicleLocation,HFRCMVirtualSurfaceDrifter,DeadReckonUsingMultipleVelocitySources,DeadReckonUsingSpeedCalculator,DeadReckonWithRespectToWater,DeadReckonWithRespectToSeafloor,DeadReckonUsingDVLWaterTrack,DeadReckonUsingCompactModelForecast,NavChart,UniversalFixResidualReporter,MissionManager,VerticalControl,HorizontalControl,SpeedControl,LoopControl,BuoyancyServo,ElevatorServo,MassServo,RudderServo,ThrusterServo,SBIT,IBIT,CBIT,Reporter,LogSplitter,
2015-01-29T23:42:08.144Z,1422574928.144 [AHRS_sp3003D](DEBUG): Initializing AHRS_sp3003D.
2015-01-29T23:42:08.319Z,1422574928.319 [DVL_micro](INFO): Initializing
2015-01-29T23:42:08.345Z,1422574928.345 [NAL9602](INFO): Powering up NAL9602
2015-01-29T23:42:17.441Z,1422574937.441 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:42:17.440Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:42:17.469Z,1422574937.469 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:42:17.468Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:42:17.486Z,1422574937.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-01-29T23:42:17.488Z,1422574937.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:42:17.706Z,1422574937.706 [BuoyancyServo](DEBUG): Initializing EZServoServo.
2015-01-29T23:42:17.722Z,1422574937.722 [BuoyancyServo](DEBUG): Initializing BuoyancyServo.
2015-01-29T23:42:17.736Z,1422574937.736 [ElevatorServo](DEBUG): Initializing EZServoServo.
2015-01-29T23:42:17.738Z,1422574937.738 [ElevatorServo](DEBUG): Initializing ElevatorServo.
2015-01-29T23:42:17.744Z,1422574937.744 [MassServo](DEBUG): Initializing EZServoServo.
2015-01-29T23:42:17.750Z,1422574937.750 [MassServo](DEBUG): Initializing MassServo.
2015-01-29T23:42:17.772Z,1422574937.772 [RudderServo](DEBUG): Initializing EZServoServo.
2015-01-29T23:42:17.778Z,1422574937.778 [RudderServo](DEBUG): Initializing RudderServo.
2015-01-29T23:42:17.786Z,1422574937.786 [ThrusterServo](DEBUG): Initializing EZServoServo.
2015-01-29T23:42:17.794Z,1422574937.794 [ThrusterServo](DEBUG): Initializing ThrusterServo.
2015-01-29T23:42:17.865Z,1422574937.865 [CommandLine](FAULT): Scheduling is paused
2015-01-29T23:42:17.867Z,1422574937.867 [CBIT](ERROR): Hardware Fault in component: DropWeight
2015-01-29T23:42:17.868Z,1422574937.868 [CBIT](CRITICAL): Hardware Fault in component: DropWeight
2015-01-29T23:42:18.314Z,1422574938.314 [AHRS_sp3003D](ERROR): readHeadingMagBin UART error: serial timeout
2015-01-29T23:42:18.314Z,1422574938.314 [AHRS_sp3003D](ERROR): SP3003D failed to initialize
2015-01-29T23:42:18.314Z,1422574938.314 [AHRS_sp3003D] Hardware Fault, FailCount= 1
2015-01-29T23:42:18.315Z,1422574938.315 [AHRS_sp3003D](ERROR): Hardware Fault
2015-01-29T23:42:18.398Z,1422574938.398 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:42:18.397Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:42:18.412Z,1422574938.412 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:42:18.410Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:42:18.413Z,1422574938.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-01-29T23:42:18.415Z,1422574938.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:42:18.748Z,1422574938.748 [SBIT](IMPORTANT): Beginning Startup BIT
2015-01-29T23:42:18.750Z,1422574938.750 [CBIT](ERROR): Hardware Fault in component: AHRS_sp3003D
2015-01-29T23:42:18.751Z,1422574938.751 [CBIT](IMPORTANT): Beginning GF scan
2015-01-29T23:42:18.790Z,1422574938.790 [AHRS_sp3003D](INFO): Powering down
2015-01-29T23:42:18.941Z,1422574938.941 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:42:18.935Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:42:18.949Z,1422574938.949 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:42:18.942Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:42:18.951Z,1422574938.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 2 cycles since last successful read, accepting data for 5 cycles.
2015-01-29T23:42:18.956Z,1422574938.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:42:19.249Z,1422574939.249 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:42:19.248Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:42:19.251Z,1422574939.251 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:42:19.250Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:42:19.257Z,1422574939.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 3 cycles since last successful read, accepting data for 5 cycles.
2015-01-29T23:42:19.258Z,1422574939.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:42:19.582Z,1422574939.582 [NAL9602](INFO): NAL9602 initialized
2015-01-29T23:42:19.647Z,1422574939.647 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:42:19.646Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:42:19.650Z,1422574939.650 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:42:19.648Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:42:19.651Z,1422574939.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 4 cycles since last successful read, accepting data for 5 cycles.
2015-01-29T23:42:19.652Z,1422574939.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:42:20.093Z,1422574940.093 [Aanderaa_O2](INFO): Powering down
2015-01-29T23:42:20.250Z,1422574940.250 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:42:20.248Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:42:20.252Z,1422574940.252 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:42:20.251Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:42:20.254Z,1422574940.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 5 cycles since last successful read, accepting data for 5 cycles.
2015-01-29T23:42:20.255Z,1422574940.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:42:20.496Z,1422574940.496 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:42:20.495Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:42:20.503Z,1422574940.503 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:42:20.497Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:42:20.504Z,1422574940.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): All data for platform velocity is invalid.
2015-01-29T23:42:20.505Z,1422574940.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:42:20.569Z,1422574940.569 [CBIT](INFO): Clearing failed state for component AHRS_sp3003D
2015-01-29T23:42:20.569Z,1422574940.569 [AHRS_sp3003D] No Fault, FailCount= 1
2015-01-29T23:42:20.843Z,1422574940.843 [AHRS_sp3003D](DEBUG): Initializing AHRS_sp3003D.
2015-01-29T23:42:20.979Z,1422574940.979 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:42:20.978Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:42:20.982Z,1422574940.982 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:42:20.980Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:42:20.995Z,1422574940.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): All data for platform velocity is invalid.
2015-01-29T23:42:20.996Z,1422574940.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:42:21.337Z,1422574941.337 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:42:21.335Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:42:21.343Z,1422574941.343 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:42:21.338Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:42:21.345Z,1422574941.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): All data for platform velocity is invalid.
2015-01-29T23:42:21.346Z,1422574941.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:42:21.976Z,1422574941.976 [AHRS_sp3003D](ERROR): readHeadingMagBin UART error: serial timeout
2015-01-29T23:42:21.976Z,1422574941.976 [AHRS_sp3003D](ERROR): SP3003D failed to initialize
2015-01-29T23:42:21.976Z,1422574941.976 [AHRS_sp3003D] Hardware Fault, FailCount= 2
2015-01-29T23:42:21.976Z,1422574941.976 [AHRS_sp3003D](ERROR): Hardware Fault
2015-01-29T23:42:22.018Z,1422574942.018 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:42:22.016Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:42:22.044Z,1422574942.044 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:42:22.019Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:42:22.046Z,1422574942.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): All data for platform velocity is invalid.
2015-01-29T23:42:22.047Z,1422574942.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:42:22.396Z,1422574942.396 [CBIT](ERROR): Hardware Fault in component: AHRS_sp3003D
2015-01-29T23:42:22.406Z,1422574942.406 [AHRS_sp3003D](INFO): Powering down
2015-01-29T23:42:22.514Z,1422574942.514 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:42:22.558Z,1422574942.558 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:42:22.552Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:42:22.560Z,1422574942.560 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:42:22.559Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:42:22.567Z,1422574942.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:42:22.815Z,1422574942.815 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:42:22.851Z,1422574942.851 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:42:22.850Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:42:22.858Z,1422574942.858 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:42:22.852Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:42:22.860Z,1422574942.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:42:23.215Z,1422574943.215 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:42:23.272Z,1422574943.272 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:42:23.271Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:42:23.294Z,1422574943.294 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:42:23.273Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:42:23.296Z,1422574943.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:42:23.649Z,1422574943.649 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:42:23.692Z,1422574943.692 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:42:23.674Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:42:23.705Z,1422574943.705 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:42:23.704Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:42:23.708Z,1422574943.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:42:24.021Z,1422574944.021 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:42:24.049Z,1422574944.049 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:42:24.048Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:42:24.056Z,1422574944.056 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:42:24.050Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:42:24.058Z,1422574944.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:42:24.259Z,1422574944.259 [CBIT](INFO): Clearing failed state for component AHRS_sp3003D
2015-01-29T23:42:24.259Z,1422574944.259 [AHRS_sp3003D] No Fault, FailCount= 2
2015-01-29T23:42:24.425Z,1422574944.425 [AHRS_sp3003D](DEBUG): Initializing AHRS_sp3003D.
2015-01-29T23:42:24.441Z,1422574944.441 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:42:24.467Z,1422574944.467 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:42:24.465Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:42:24.473Z,1422574944.473 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:42:24.472Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:42:24.480Z,1422574944.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:42:24.864Z,1422574944.864 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:42:24.951Z,1422574944.951 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:42:24.949Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:42:24.961Z,1422574944.961 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:42:24.952Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:42:24.963Z,1422574944.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:42:25.586Z,1422574945.586 [AHRS_sp3003D](ERROR): readHeadingMagBin UART error: serial timeout
2015-01-29T23:42:25.586Z,1422574945.586 [AHRS_sp3003D](ERROR): SP3003D failed to initialize
2015-01-29T23:42:25.586Z,1422574945.586 [AHRS_sp3003D] Hardware Fault, FailCount= 3
2015-01-29T23:42:25.586Z,1422574945.586 [AHRS_sp3003D](ERROR): Hardware Fault
2015-01-29T23:42:25.591Z,1422574945.591 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:42:25.637Z,1422574945.637 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:42:25.635Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:42:25.643Z,1422574945.643 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:42:25.642Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:42:25.658Z,1422574945.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:42:25.746Z,1422574945.746 [CBIT](ERROR): Hardware Fault in component: AHRS_sp3003D
2015-01-29T23:42:25.775Z,1422574945.775 [AHRS_sp3003D](INFO): Powering down
2015-01-29T23:42:25.864Z,1422574945.864 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:42:25.886Z,1422574945.886 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:42:25.884Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:42:25.892Z,1422574945.892 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:42:25.891Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:42:25.917Z,1422574945.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:42:26.164Z,1422574946.164 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:42:26.213Z,1422574946.213 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:42:26.212Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:42:26.220Z,1422574946.220 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:42:26.214Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:42:26.222Z,1422574946.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:42:26.564Z,1422574946.564 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:42:26.586Z,1422574946.586 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:42:26.584Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:42:26.592Z,1422574946.592 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:42:26.587Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:42:26.594Z,1422574946.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:42:26.965Z,1422574946.965 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:42:27.030Z,1422574947.030 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:42:27.029Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:42:27.033Z,1422574947.033 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:42:27.031Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:42:27.035Z,1422574947.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:42:27.386Z,1422574947.386 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:42:27.439Z,1422574947.439 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:42:27.438Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:42:27.446Z,1422574947.446 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:42:27.440Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:42:27.448Z,1422574947.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:42:27.537Z,1422574947.537 [CBIT](INFO): Clearing failed state for component AHRS_sp3003D
2015-01-29T23:42:27.537Z,1422574947.537 [AHRS_sp3003D] No Fault, FailCount= 3
2015-01-29T23:42:27.758Z,1422574947.758 [AHRS_sp3003D](DEBUG): Initializing AHRS_sp3003D.
2015-01-29T23:42:27.762Z,1422574947.762 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:42:27.819Z,1422574947.819 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:42:27.818Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:42:27.826Z,1422574947.826 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:42:27.820Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:42:27.828Z,1422574947.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:42:28.163Z,1422574948.163 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:42:28.244Z,1422574948.244 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:42:28.242Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:42:28.246Z,1422574948.246 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:42:28.245Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:42:28.248Z,1422574948.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:42:28.907Z,1422574948.907 [AHRS_sp3003D](ERROR): readHeadingMagBin UART error: serial timeout
2015-01-29T23:42:28.907Z,1422574948.907 [AHRS_sp3003D](ERROR): SP3003D failed to initialize
2015-01-29T23:42:28.907Z,1422574948.907 [AHRS_sp3003D] Hardware Fault, FailCount= 4
2015-01-29T23:42:28.907Z,1422574948.907 [AHRS_sp3003D](ERROR): Hardware Fault
2015-01-29T23:42:28.912Z,1422574948.912 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:42:29.032Z,1422574949.032 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:42:29.031Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:42:29.034Z,1422574949.034 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:42:29.033Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:42:29.037Z,1422574949.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:42:29.139Z,1422574949.139 [CBIT](ERROR): Hardware Fault in component: AHRS_sp3003D
2015-01-29T23:42:29.165Z,1422574949.165 [AHRS_sp3003D](INFO): Powering down
2015-01-29T23:42:29.257Z,1422574949.257 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:42:29.284Z,1422574949.284 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:42:29.278Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:42:29.286Z,1422574949.286 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:42:29.285Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:42:29.317Z,1422574949.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:42:29.601Z,1422574949.601 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:42:29.623Z,1422574949.623 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:42:29.622Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:42:29.630Z,1422574949.630 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:42:29.629Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:42:29.637Z,1422574949.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:42:29.978Z,1422574949.978 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:42:30.019Z,1422574950.019 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:42:30.018Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:42:30.030Z,1422574950.030 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:42:30.020Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:42:30.032Z,1422574950.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:42:30.402Z,1422574950.402 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:42:30.474Z,1422574950.474 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:42:30.448Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:42:30.476Z,1422574950.476 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:42:30.475Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:42:30.486Z,1422574950.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:42:30.775Z,1422574950.775 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:42:30.868Z,1422574950.868 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:42:30.867Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:42:30.875Z,1422574950.875 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:42:30.869Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:42:30.877Z,1422574950.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:42:30.963Z,1422574950.963 [CBIT](INFO): Clearing failed state for component AHRS_sp3003D
2015-01-29T23:42:30.963Z,1422574950.963 [AHRS_sp3003D] No Fault, FailCount= 4
2015-01-29T23:42:31.179Z,1422574951.179 [AHRS_sp3003D](DEBUG): Initializing AHRS_sp3003D.
2015-01-29T23:42:31.192Z,1422574951.192 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:42:31.230Z,1422574951.230 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:42:31.229Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:42:31.244Z,1422574951.244 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:42:31.242Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:42:31.246Z,1422574951.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:42:31.576Z,1422574951.576 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:42:31.696Z,1422574951.696 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:42:31.690Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:42:31.698Z,1422574951.698 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:42:31.697Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:42:31.705Z,1422574951.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:42:31.793Z,1422574951.793 [SBIT](ERROR): Could not read massPosReader_.
2015-01-29T23:42:32.328Z,1422574952.328 [AHRS_sp3003D](ERROR): readHeadingMagBin UART error: serial timeout
2015-01-29T23:42:32.328Z,1422574952.328 [AHRS_sp3003D](ERROR): SP3003D failed to initialize
2015-01-29T23:42:32.328Z,1422574952.328 [AHRS_sp3003D] Hardware Fault, FailCount= 5
2015-01-29T23:42:32.328Z,1422574952.328 [AHRS_sp3003D](ERROR): Hardware Fault
2015-01-29T23:42:32.334Z,1422574952.334 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:42:32.401Z,1422574952.401 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:42:32.399Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:42:32.407Z,1422574952.407 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:42:32.406Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:42:32.425Z,1422574952.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:42:32.504Z,1422574952.504 [CBIT](ERROR): Hardware Fault in component: AHRS_sp3003D
2015-01-29T23:42:32.504Z,1422574952.504 [CBIT](CRITICAL): Hardware Fault in component: AHRS_sp3003D
2015-01-29T23:42:32.527Z,1422574952.527 [AHRS_sp3003D](INFO): Powering down
2015-01-29T23:42:32.620Z,1422574952.620 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:42:32.639Z,1422574952.639 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:42:32.638Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:42:32.646Z,1422574952.646 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:42:32.640Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:42:32.648Z,1422574952.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:42:32.926Z,1422574952.926 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:42:33.007Z,1422574953.007 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:42:33.006Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:42:33.023Z,1422574953.023 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:42:33.008Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:42:33.030Z,1422574953.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:42:33.323Z,1422574953.323 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:42:33.388Z,1422574953.388 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:42:33.387Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:42:33.395Z,1422574953.395 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:42:33.389Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:42:33.397Z,1422574953.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:42:33.724Z,1422574953.724 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:42:33.754Z,1422574953.754 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:42:33.749Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:42:33.757Z,1422574953.757 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:42:33.755Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:42:33.779Z,1422574953.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:42:34.125Z,1422574954.125 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:42:34.151Z,1422574954.151 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:42:34.146Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:42:34.154Z,1422574954.154 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:42:34.152Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:42:34.156Z,1422574954.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:42:34.529Z,1422574954.529 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:42:34.560Z,1422574954.560 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:42:34.554Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:42:34.562Z,1422574954.562 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:42:34.561Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:42:34.589Z,1422574954.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:42:34.922Z,1422574954.922 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:42:34.000Z,1422574955.000 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:42:34.998Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:42:35.010Z,1422574955.010 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:42:35.009Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:42:35.021Z,1422574955.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:42:35.322Z,1422574955.322 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:42:35.363Z,1422574955.363 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:42:35.362Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:42:35.370Z,1422574955.370 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:42:35.364Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:42:35.372Z,1422574955.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:42:35.723Z,1422574955.723 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:42:35.760Z,1422574955.760 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:42:35.759Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:42:35.766Z,1422574955.766 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:42:35.761Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:42:35.769Z,1422574955.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:42:36.123Z,1422574956.123 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:42:36.156Z,1422574956.156 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:42:36.155Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:42:36.159Z,1422574956.159 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:42:36.157Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:42:36.161Z,1422574956.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:42:36.520Z,1422574956.520 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:42:36.553Z,1422574956.553 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:42:36.552Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:42:36.559Z,1422574956.559 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:42:36.554Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:42:36.562Z,1422574956.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:42:36.921Z,1422574956.921 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:42:36.962Z,1422574956.962 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:42:36.960Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:42:36.968Z,1422574956.968 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:42:36.963Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:42:36.970Z,1422574956.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:42:37.321Z,1422574957.321 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:42:37.371Z,1422574957.371 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:42:37.370Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:42:37.377Z,1422574957.377 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:42:37.376Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:42:37.379Z,1422574957.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:42:37.722Z,1422574957.722 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:42:37.759Z,1422574957.759 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:42:37.758Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:42:37.765Z,1422574957.765 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:42:37.760Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:42:37.768Z,1422574957.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:42:38.123Z,1422574958.123 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:42:38.216Z,1422574958.216 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:42:38.214Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:42:38.226Z,1422574958.226 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:42:38.217Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:42:38.228Z,1422574958.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:42:38.523Z,1422574958.523 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:42:38.560Z,1422574958.560 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:42:38.559Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:42:38.567Z,1422574958.567 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:42:38.561Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:42:38.569Z,1422574958.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:42:38.924Z,1422574958.924 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:42:38.972Z,1422574958.972 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:42:38.971Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:42:38.978Z,1422574958.978 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:42:38.973Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:42:38.981Z,1422574958.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:42:39.344Z,1422574959.344 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:42:39.370Z,1422574959.370 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:42:39.369Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:42:39.377Z,1422574959.377 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:42:39.376Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:42:39.383Z,1422574959.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:42:39.764Z,1422574959.764 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:42:39.787Z,1422574959.787 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:42:39.786Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:42:39.817Z,1422574959.817 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:42:39.811Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:42:39.819Z,1422574959.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:42:40.166Z,1422574960.166 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:42:40.215Z,1422574960.215 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:42:40.213Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:42:40.221Z,1422574960.221 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:42:40.216Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:42:40.223Z,1422574960.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:42:40.562Z,1422574960.562 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:42:40.622Z,1422574960.622 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:42:40.616Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:42:40.624Z,1422574960.624 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:42:40.623Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:42:40.630Z,1422574960.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:42:40.983Z,1422574960.983 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:42:41.017Z,1422574961.017 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:42:41.012Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:42:41.020Z,1422574961.020 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:42:41.018Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:42:41.026Z,1422574961.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:42:41.363Z,1422574961.363 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:42:41.430Z,1422574961.430 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:42:41.428Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:42:41.444Z,1422574961.444 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:42:41.443Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:42:41.454Z,1422574961.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:42:41.760Z,1422574961.760 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:42:41.806Z,1422574961.806 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:42:41.804Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:42:41.809Z,1422574961.809 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:42:41.808Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:42:41.811Z,1422574961.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:42:42.165Z,1422574962.165 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:42:42.190Z,1422574962.190 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:42:42.188Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:42:42.196Z,1422574962.196 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:42:42.191Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:42:42.198Z,1422574962.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:42:42.565Z,1422574962.565 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:42:42.603Z,1422574962.603 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:42:42.602Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:42:42.610Z,1422574962.610 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:42:42.608Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:42:42.634Z,1422574962.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:42:42.962Z,1422574962.962 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:42:43.003Z,1422574963.003 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:42:43.002Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:42:43.006Z,1422574963.006 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:42:43.004Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:42:43.008Z,1422574963.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:42:43.363Z,1422574963.363 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:42:43.412Z,1422574963.412 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:42:43.411Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:42:43.431Z,1422574963.431 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:42:43.430Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:42:43.438Z,1422574963.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:42:43.779Z,1422574963.779 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:42:43.810Z,1422574963.810 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:42:43.804Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:42:43.812Z,1422574963.812 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:42:43.811Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:42:43.835Z,1422574963.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:42:44.164Z,1422574964.164 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:42:44.212Z,1422574964.212 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:42:44.210Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:42:44.214Z,1422574964.214 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:42:44.213Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:42:44.220Z,1422574964.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:42:44.535Z,1422574964.535 [CommandLine](IMPORTANT): got command failComponent
2015-01-29T23:42:44.535Z,1422574964.535 [CommandLine](IMPORTANT): Failed components:
2015-01-29T23:42:44.536Z,1422574964.536 [CommandLine](IMPORTANT): AHRS_sp3003D: Hardware Fault
2015-01-29T23:42:44.536Z,1422574964.536 [CommandLine](IMPORTANT): DropWeight: Hardware Fault
2015-01-29T23:42:44.560Z,1422574964.560 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:42:44.653Z,1422574964.653 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:42:44.651Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:42:44.663Z,1422574964.663 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:42:44.654Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:42:44.666Z,1422574964.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:42:44.965Z,1422574964.965 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:42:44.987Z,1422574964.987 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:42:44.986Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:42:45.011Z,1422574965.011 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:42:45.010Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:42:45.018Z,1422574965.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:42:45.366Z,1422574965.366 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:42:45.464Z,1422574965.464 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:42:45.459Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:42:45.467Z,1422574965.467 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:42:45.465Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:42:45.473Z,1422574965.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:42:45.547Z,1422574965.547 [CBIT](IMPORTANT): No ground fault detected
2015-01-29T23:42:45.762Z,1422574965.762 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:42:45.852Z,1422574965.852 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:42:45.851Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:42:45.858Z,1422574965.858 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:42:45.857Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:42:45.865Z,1422574965.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:42:46.163Z,1422574966.163 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:42:46.205Z,1422574966.205 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:42:46.184Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:42:46.211Z,1422574966.211 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:42:46.210Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:42:46.218Z,1422574966.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:42:46.560Z,1422574966.560 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:42:46.618Z,1422574966.618 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:42:46.616Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:42:46.621Z,1422574966.621 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:42:46.619Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:42:46.623Z,1422574966.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:42:46.960Z,1422574966.960 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:42:47.029Z,1422574967.029 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:42:47.028Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:42:47.036Z,1422574967.036 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:42:47.030Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:42:47.038Z,1422574967.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:42:47.365Z,1422574967.365 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:42:47.413Z,1422574967.413 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:42:47.411Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:42:47.415Z,1422574967.415 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:42:47.414Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:42:47.422Z,1422574967.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:42:47.762Z,1422574967.762 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:42:47.891Z,1422574967.891 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:42:47.890Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:42:47.903Z,1422574967.903 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:42:47.901Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:42:47.909Z,1422574967.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:42:48.162Z,1422574968.162 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:42:48.224Z,1422574968.224 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:42:48.222Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:42:48.230Z,1422574968.230 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:42:48.229Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:42:48.237Z,1422574968.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:42:48.583Z,1422574968.583 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:42:48.624Z,1422574968.624 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:42:48.622Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:42:48.631Z,1422574968.631 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:42:48.625Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:42:48.637Z,1422574968.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:42:48.862Z,1422574968.862 [CommandLine](IMPORTANT): got command failComponent none AHRS_sp3003D
2015-01-29T23:42:48.862Z,1422574968.862 [AHRS_sp3003D] No Fault, FailCount= 5
2015-01-29T23:42:48.863Z,1422574968.863 [CommandLine](IMPORTANT): AHRS_sp3003D failureMode is No Fault
2015-01-29T23:42:48.959Z,1422574968.959 [AHRS_sp3003D](DEBUG): Initializing AHRS_sp3003D.
2015-01-29T23:42:48.964Z,1422574968.964 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:42:49.026Z,1422574969.026 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:42:49.025Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:42:49.029Z,1422574969.029 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:42:49.027Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:42:49.032Z,1422574969.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:42:49.360Z,1422574969.360 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:42:49.408Z,1422574969.408 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:42:49.406Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:42:49.410Z,1422574969.410 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:42:49.409Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:42:49.417Z,1422574969.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:42:50.092Z,1422574970.092 [AHRS_sp3003D](ERROR): readHeadingMagBin UART error: serial timeout
2015-01-29T23:42:50.092Z,1422574970.092 [AHRS_sp3003D](ERROR): SP3003D failed to initialize
2015-01-29T23:42:50.092Z,1422574970.092 [AHRS_sp3003D] Hardware Fault, FailCount= 6
2015-01-29T23:42:50.092Z,1422574970.092 [AHRS_sp3003D](ERROR): Hardware Fault
2015-01-29T23:42:50.108Z,1422574970.108 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:42:50.155Z,1422574970.155 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:42:50.154Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:42:50.162Z,1422574970.162 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:42:50.160Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:42:50.168Z,1422574970.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:42:50.237Z,1422574970.237 [CBIT](ERROR): Hardware Fault in component: AHRS_sp3003D
2015-01-29T23:42:50.237Z,1422574970.237 [CBIT](CRITICAL): Hardware Fault in component: AHRS_sp3003D
2015-01-29T23:42:50.269Z,1422574970.269 [AHRS_sp3003D](INFO): Powering down
2015-01-29T23:42:50.358Z,1422574970.358 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:42:50.385Z,1422574970.385 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:42:50.384Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:42:50.388Z,1422574970.388 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:42:50.386Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:42:50.411Z,1422574970.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:42:50.682Z,1422574970.682 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:42:50.732Z,1422574970.732 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:42:50.731Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:42:50.738Z,1422574970.738 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:42:50.737Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:42:50.757Z,1422574970.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:42:51.055Z,1422574971.055 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:42:51.148Z,1422574971.148 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:42:51.146Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:42:51.150Z,1422574971.150 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:42:51.149Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:42:51.162Z,1422574971.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:42:51.451Z,1422574971.451 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:42:51.499Z,1422574971.499 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:42:51.498Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:42:51.506Z,1422574971.506 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:42:51.500Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:42:51.508Z,1422574971.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:42:51.856Z,1422574971.856 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:42:51.900Z,1422574971.900 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:42:51.899Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:42:51.907Z,1422574971.907 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:42:51.901Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:42:51.909Z,1422574971.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:42:52.252Z,1422574972.253 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:42:52.309Z,1422574972.309 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:42:52.308Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:42:52.311Z,1422574972.311 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:42:52.310Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:42:52.313Z,1422574972.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:42:52.653Z,1422574972.653 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:42:52.698Z,1422574972.698 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:42:52.697Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:42:52.705Z,1422574972.705 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:42:52.699Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:42:52.707Z,1422574972.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:42:53.054Z,1422574973.054 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:42:53.122Z,1422574973.122 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:42:53.121Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:42:53.144Z,1422574973.144 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:42:53.123Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:42:53.146Z,1422574973.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:42:53.454Z,1422574973.454 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:42:53.510Z,1422574973.510 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:42:53.509Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:42:53.512Z,1422574973.512 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:42:53.511Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:42:53.515Z,1422574973.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:42:53.855Z,1422574973.855 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:42:53.904Z,1422574973.904 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:42:53.903Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:42:53.910Z,1422574973.910 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:42:53.905Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:42:53.913Z,1422574973.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:42:54.256Z,1422574974.256 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:42:54.369Z,1422574974.369 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:42:54.367Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:42:54.375Z,1422574974.375 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:42:54.370Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:42:54.378Z,1422574974.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:42:54.656Z,1422574974.656 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:42:54.704Z,1422574974.704 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:42:54.703Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:42:54.707Z,1422574974.707 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:42:54.705Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:42:54.720Z,1422574974.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:42:55.057Z,1422574975.057 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:42:55.104Z,1422574975.104 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:42:55.099Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:42:55.107Z,1422574975.107 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:42:55.105Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:42:55.113Z,1422574975.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:42:55.453Z,1422574975.453 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:42:55.501Z,1422574975.501 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:42:55.500Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:42:55.503Z,1422574975.503 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:42:55.502Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:42:55.510Z,1422574975.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:42:55.854Z,1422574975.854 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:42:55.914Z,1422574975.914 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:42:55.913Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:42:55.917Z,1422574975.917 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:42:55.915Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:42:55.919Z,1422574975.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:42:56.149Z,1422574976.149 [CommandLine](IMPORTANT): got command failComponent none AHRS_sp3003D
2015-01-29T23:42:56.150Z,1422574976.150 [AHRS_sp3003D] No Fault, FailCount= 6
2015-01-29T23:42:56.150Z,1422574976.150 [CommandLine](IMPORTANT): AHRS_sp3003D failureMode is No Fault
2015-01-29T23:42:56.250Z,1422574976.250 [AHRS_sp3003D](DEBUG): Initializing AHRS_sp3003D.
2015-01-29T23:42:56.263Z,1422574976.263 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:42:56.310Z,1422574976.310 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:42:56.304Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:42:56.312Z,1422574976.312 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:42:56.311Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:42:56.318Z,1422574976.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:42:56.663Z,1422574976.663 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:42:56.710Z,1422574976.710 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:42:56.704Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:42:56.713Z,1422574976.713 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:42:56.711Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:42:56.719Z,1422574976.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:42:57.399Z,1422574977.399 [AHRS_sp3003D](ERROR): readHeadingMagBin UART error: serial timeout
2015-01-29T23:42:57.399Z,1422574977.399 [AHRS_sp3003D](ERROR): SP3003D failed to initialize
2015-01-29T23:42:57.399Z,1422574977.399 [AHRS_sp3003D] Hardware Fault, FailCount= 7
2015-01-29T23:42:57.399Z,1422574977.399 [AHRS_sp3003D](ERROR): Hardware Fault
2015-01-29T23:42:57.405Z,1422574977.405 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:42:57.509Z,1422574977.509 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:42:57.508Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:42:57.512Z,1422574977.512 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:42:57.510Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:42:57.521Z,1422574977.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:42:57.588Z,1422574977.588 [CBIT](ERROR): Hardware Fault in component: AHRS_sp3003D
2015-01-29T23:42:57.588Z,1422574977.588 [CBIT](CRITICAL): Hardware Fault in component: AHRS_sp3003D
2015-01-29T23:42:57.600Z,1422574977.600 [AHRS_sp3003D](INFO): Powering down
2015-01-29T23:42:57.693Z,1422574977.693 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:42:57.731Z,1422574977.731 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:42:57.726Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:42:57.734Z,1422574977.734 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:42:57.732Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:42:57.740Z,1422574977.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:42:58.021Z,1422574978.021 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:42:58.070Z,1422574978.070 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:42:58.068Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:42:58.076Z,1422574978.076 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:42:58.071Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:42:58.078Z,1422574978.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:42:58.422Z,1422574978.422 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:42:58.478Z,1422574978.478 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:42:58.477Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:42:58.481Z,1422574978.481 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:42:58.479Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:42:58.483Z,1422574978.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:42:58.811Z,1422574978.811 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:42:58.866Z,1422574978.866 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:42:58.860Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:42:58.868Z,1422574978.868 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:42:58.867Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:42:58.875Z,1422574978.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:42:59.212Z,1422574979.212 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:42:59.228Z,1422574979.228 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:42:59.227Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:42:59.231Z,1422574979.231 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:42:59.230Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:42:59.233Z,1422574979.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:42:59.608Z,1422574979.608 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:42:59.623Z,1422574979.623 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:42:59.622Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:42:59.625Z,1422574979.625 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:42:59.624Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:42:59.628Z,1422574979.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:43:00.012Z,1422574980.012 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:43:00.028Z,1422574980.028 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:43:00.026Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:43:00.030Z,1422574980.030 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:43:00.028Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:43:00.032Z,1422574980.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:43:00.409Z,1422574980.409 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:43:00.486Z,1422574980.486 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:43:00.485Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:43:00.493Z,1422574980.493 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:43:00.487Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:43:00.495Z,1422574980.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:43:00.813Z,1422574980.813 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:43:00.852Z,1422574980.852 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:43:00.851Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:43:00.854Z,1422574980.854 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:43:00.853Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:43:00.881Z,1422574980.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:43:01.380Z,1422574981.380 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:43:01.395Z,1422574981.395 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:43:01.393Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:43:01.397Z,1422574981.397 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:43:01.396Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:43:01.399Z,1422574981.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:43:01.787Z,1422574981.787 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:43:01.801Z,1422574981.801 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:43:01.800Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:43:01.804Z,1422574981.804 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:43:01.802Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:43:01.822Z,1422574981.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:43:02.188Z,1422574982.188 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:43:02.245Z,1422574982.245 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:43:02.244Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:43:02.248Z,1422574982.248 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:43:02.247Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:43:02.250Z,1422574982.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:43:02.584Z,1422574982.584 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:43:02.598Z,1422574982.598 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:43:02.597Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:43:02.601Z,1422574982.601 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:43:02.600Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:43:02.603Z,1422574982.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:43:02.985Z,1422574982.985 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:43:03.016Z,1422574983.016 [CommandLine](IMPORTANT): got command failComponent none AHRS_sp3003D
2015-01-29T23:43:03.016Z,1422574983.016 [AHRS_sp3003D] No Fault, FailCount= 7
2015-01-29T23:43:03.017Z,1422574983.017 [CommandLine](IMPORTANT): AHRS_sp3003D failureMode is No Fault
2015-01-29T23:43:03.074Z,1422574983.074 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:43:03.073Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:43:03.077Z,1422574983.077 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:43:03.075Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:43:03.080Z,1422574983.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:43:03.381Z,1422574983.381 [AHRS_sp3003D](DEBUG): Initializing AHRS_sp3003D.
2015-01-29T23:43:03.386Z,1422574983.386 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:43:03.471Z,1422574983.471 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:43:03.470Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:43:03.474Z,1422574983.474 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:43:03.472Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:43:03.476Z,1422574983.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:43:03.784Z,1422574983.784 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:43:03.828Z,1422574983.828 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:43:03.826Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:43:03.830Z,1422574983.830 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:43:03.829Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:43:03.832Z,1422574983.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:43:04.514Z,1422574984.514 [AHRS_sp3003D](ERROR): readHeadingMagBin UART error: serial timeout
2015-01-29T23:43:04.514Z,1422574984.514 [AHRS_sp3003D](ERROR): SP3003D failed to initialize
2015-01-29T23:43:04.514Z,1422574984.514 [AHRS_sp3003D] Hardware Fault, FailCount= 8
2015-01-29T23:43:04.514Z,1422574984.514 [AHRS_sp3003D](ERROR): Hardware Fault
2015-01-29T23:43:04.524Z,1422574984.524 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:43:04.538Z,1422574984.538 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:43:04.537Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:43:04.540Z,1422574984.540 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:43:04.539Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:43:04.542Z,1422574984.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:43:04.618Z,1422574984.618 [CBIT](ERROR): Hardware Fault in component: AHRS_sp3003D
2015-01-29T23:43:04.619Z,1422574984.619 [CBIT](CRITICAL): Hardware Fault in component: AHRS_sp3003D
2015-01-29T23:43:04.631Z,1422574984.631 [AHRS_sp3003D](INFO): Powering down
2015-01-29T23:43:04.724Z,1422574984.724 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:43:04.739Z,1422574984.739 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:43:04.737Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:43:04.741Z,1422574984.741 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:43:04.739Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:43:04.743Z,1422574984.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:43:05.038Z,1422574985.038 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:43:05.053Z,1422574985.053 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:43:05.051Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:43:05.055Z,1422574985.055 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:43:05.054Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:43:05.057Z,1422574985.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:43:05.439Z,1422574985.439 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:43:05.454Z,1422574985.454 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:43:05.452Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:43:05.456Z,1422574985.456 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:43:05.455Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:43:05.458Z,1422574985.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:43:05.839Z,1422574985.839 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:43:05.854Z,1422574985.854 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:43:05.852Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:43:05.856Z,1422574985.856 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:43:05.855Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:43:05.858Z,1422574985.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:43:06.240Z,1422574986.240 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:43:06.254Z,1422574986.254 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:43:06.253Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:43:06.273Z,1422574986.273 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:43:06.255Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:43:06.275Z,1422574986.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:43:06.633Z,1422574986.633 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:43:06.700Z,1422574986.700 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:43:06.698Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:43:06.702Z,1422574986.702 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:43:06.701Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:43:06.704Z,1422574986.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:43:07.033Z,1422574987.033 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:43:07.049Z,1422574987.049 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:43:07.048Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:43:07.052Z,1422574987.052 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:43:07.050Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:43:07.054Z,1422574987.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:43:07.440Z,1422574987.440 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:43:07.454Z,1422574987.454 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:43:07.452Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:43:07.456Z,1422574987.456 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:43:07.455Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:43:07.475Z,1422574987.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:43:07.841Z,1422574987.841 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:43:07.855Z,1422574987.855 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:43:07.853Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:43:07.857Z,1422574987.857 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:43:07.856Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:43:07.881Z,1422574987.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:43:08.235Z,1422574988.235 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:43:08.277Z,1422574988.277 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:43:08.276Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:43:08.279Z,1422574988.279 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:43:08.278Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:43:08.282Z,1422574988.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:43:08.637Z,1422574988.637 [CommandLine](IMPORTANT): got command failComponent none AHRS_sp3003D
2015-01-29T23:43:08.637Z,1422574988.637 [AHRS_sp3003D] No Fault, FailCount= 8
2015-01-29T23:43:08.638Z,1422574988.638 [CommandLine](IMPORTANT): AHRS_sp3003D failureMode is No Fault
2015-01-29T23:43:08.640Z,1422574988.640 [AHRS_sp3003D](DEBUG): Initializing AHRS_sp3003D.
2015-01-29T23:43:08.646Z,1422574988.646 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:43:08.660Z,1422574988.660 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:43:08.658Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:43:08.678Z,1422574988.678 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:43:08.677Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:43:08.681Z,1422574988.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:43:09.044Z,1422574989.044 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:43:09.088Z,1422574989.088 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:43:09.086Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:43:09.090Z,1422574989.090 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:43:09.089Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:43:09.092Z,1422574989.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:43:09.429Z,1422574989.429 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:43:09.444Z,1422574989.444 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:43:09.443Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:43:09.447Z,1422574989.447 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:43:09.445Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:43:09.450Z,1422574989.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:43:10.159Z,1422574990.159 [AHRS_sp3003D](ERROR): readHeadingMagBin UART error: serial timeout
2015-01-29T23:43:10.159Z,1422574990.159 [AHRS_sp3003D](ERROR): SP3003D failed to initialize
2015-01-29T23:43:10.159Z,1422574990.159 [AHRS_sp3003D] Hardware Fault, FailCount= 9
2015-01-29T23:43:10.159Z,1422574990.159 [AHRS_sp3003D](ERROR): Hardware Fault
2015-01-29T23:43:10.176Z,1422574990.176 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:43:10.233Z,1422574990.233 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:43:10.232Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:43:10.235Z,1422574990.235 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:43:10.234Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:43:10.237Z,1422574990.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:43:10.292Z,1422574990.292 [CBIT](ERROR): Hardware Fault in component: AHRS_sp3003D
2015-01-29T23:43:10.292Z,1422574990.292 [CBIT](CRITICAL): Hardware Fault in component: AHRS_sp3003D
2015-01-29T23:43:10.298Z,1422574990.298 [AHRS_sp3003D](INFO): Powering down
2015-01-29T23:43:10.397Z,1422574990.397 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:43:10.413Z,1422574990.413 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:43:10.411Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:43:10.415Z,1422574990.415 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:43:10.414Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:43:10.418Z,1422574990.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:43:10.710Z,1422574990.710 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:43:10.741Z,1422574990.741 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:43:10.735Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:43:10.743Z,1422574990.743 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:43:10.742Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:43:10.746Z,1422574990.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:43:11.110Z,1422574991.110 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:43:11.141Z,1422574991.141 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:43:11.139Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:43:11.144Z,1422574991.144 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:43:11.142Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:43:11.146Z,1422574991.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:43:11.511Z,1422574991.511 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:43:11.540Z,1422574991.540 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:43:11.538Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:43:11.543Z,1422574991.543 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:43:11.540Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:43:11.545Z,1422574991.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:43:11.915Z,1422574991.915 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:43:11.940Z,1422574991.940 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:43:11.938Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:43:11.943Z,1422574991.943 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:43:11.941Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:43:11.945Z,1422574991.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:43:12.308Z,1422574992.308 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:43:12.340Z,1422574992.340 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:43:12.321Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:43:12.343Z,1422574992.343 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:43:12.341Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:43:12.345Z,1422574992.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:43:12.389Z,1422574992.389 [SBIT](CRITICAL): SBIT FAILED
2015-01-29T23:43:12.704Z,1422574992.704 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:43:12.736Z,1422574992.736 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:43:12.735Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:43:12.739Z,1422574992.739 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:43:12.737Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:43:12.741Z,1422574992.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:43:12.747Z,1422574992.747 [MissionManager](IMPORTANT): Started mission Startup
2015-01-29T23:43:12.747Z,1422574992.747 [Startup] Running Loop=1
2015-01-29T23:43:12.747Z,1422574992.747 [Startup](INFO): Aggregate::initialize Startup
2015-01-29T23:43:12.748Z,1422574992.748 [Startup:A.GoToSurface] Running Loop=1
2015-01-29T23:43:12.748Z,1422574992.748 [Startup:A.GoToSurface](DEBUG): Initialize GoToSurfaceComponent.
2015-01-29T23:43:12.748Z,1422574992.748 [Startup:A.GoToSurface](DEBUG): No depth rate setting specified. Using default value of nan m/s.
2015-01-29T23:43:12.749Z,1422574992.749 [Startup:A.GoToSurface](DEBUG): No pitch setting specified. Using default value of nan degrees.
2015-01-29T23:43:12.749Z,1422574992.749 [Startup:A.GoToSurface](DEBUG): No speed setting specified. Using default value of 0.500000 m/s.
2015-01-29T23:43:12.756Z,1422574992.756 [Startup:StartupSatComms] Running Loop=1
2015-01-29T23:43:12.756Z,1422574992.756 [Startup:StartupSatComms](INFO): Aggregate::initialize Startup:StartupSatComms
2015-01-29T23:43:12.756Z,1422574992.756 [Startup:StartupSatComms:A] Running Loop=1
2015-01-29T23:43:13.113Z,1422574993.113 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:43:13.174Z,1422574993.174 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:43:13.172Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:43:13.192Z,1422574993.192 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:43:13.175Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:43:13.195Z,1422574993.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:43:13.201Z,1422574993.201 [Startup:StartupSatComms:A](DEBUG): Initialize ReadDataComponent to sense latitude_fix
2015-01-29T23:43:13.510Z,1422574993.510 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:43:13.546Z,1422574993.546 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:43:13.545Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:43:13.549Z,1422574993.549 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:43:13.547Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:43:13.551Z,1422574993.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:43:13.909Z,1422574993.909 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:43:13.955Z,1422574993.955 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:43:13.954Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:43:13.958Z,1422574993.958 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:43:13.956Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:43:13.960Z,1422574993.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:43:14.311Z,1422574994.311 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:43:14.326Z,1422574994.326 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:43:14.324Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:43:14.328Z,1422574994.328 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:43:14.327Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:43:14.346Z,1422574994.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:43:14.801Z,1422574994.801 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:43:14.816Z,1422574994.816 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:43:14.814Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:43:14.818Z,1422574994.818 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:43:14.816Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:43:14.820Z,1422574994.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:43:15.206Z,1422574995.206 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:43:15.220Z,1422574995.220 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:43:15.219Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:43:15.223Z,1422574995.223 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:43:15.221Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:43:15.225Z,1422574995.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:43:15.606Z,1422574995.606 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:43:15.668Z,1422574995.668 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:43:15.667Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:43:15.671Z,1422574995.671 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:43:15.669Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:43:15.673Z,1422574995.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:43:16.007Z,1422574996.007 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:43:16.087Z,1422574996.087 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:43:16.086Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:43:16.090Z,1422574996.090 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:43:16.088Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:43:16.092Z,1422574996.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:43:16.403Z,1422574996.403 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:43:16.447Z,1422574996.447 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:43:16.446Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:43:16.453Z,1422574996.453 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:43:16.448Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:43:16.456Z,1422574996.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:43:16.804Z,1422574996.804 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:43:16.863Z,1422574996.863 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:43:16.862Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:43:16.866Z,1422574996.866 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:43:16.864Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:43:16.868Z,1422574996.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:43:17.211Z,1422574997.211 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:43:17.225Z,1422574997.225 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:43:17.224Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:43:17.227Z,1422574997.227 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:43:17.226Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:43:17.229Z,1422574997.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:43:17.604Z,1422574997.604 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:43:17.657Z,1422574997.657 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:43:17.656Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:43:17.659Z,1422574997.659 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:43:17.658Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:43:17.661Z,1422574997.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:43:18.008Z,1422574998.008 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:43:18.074Z,1422574998.074 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:43:18.073Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:43:18.076Z,1422574998.076 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:43:18.075Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:43:18.079Z,1422574998.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:43:18.407Z,1422574998.407 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:43:18.421Z,1422574998.421 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:43:18.420Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:43:18.423Z,1422574998.423 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:43:18.422Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:43:18.425Z,1422574998.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:43:18.803Z,1422574998.803 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:43:18.834Z,1422574998.834 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:43:18.833Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:43:18.837Z,1422574998.837 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:43:18.835Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:43:18.839Z,1422574998.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:43:19.206Z,1422574999.206 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:43:19.220Z,1422574999.220 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:43:19.218Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:43:19.222Z,1422574999.222 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:43:19.221Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:43:19.224Z,1422574999.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:43:19.607Z,1422574999.607 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:43:19.666Z,1422574999.666 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:43:19.636Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:43:19.668Z,1422574999.668 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:43:19.667Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:43:19.670Z,1422574999.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:43:20.008Z,1422575000.008 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:43:20.024Z,1422575000.024 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:43:20.023Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:43:20.026Z,1422575000.026 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:43:20.025Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:43:20.029Z,1422575000.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:43:20.409Z,1422575000.409 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:43:20.423Z,1422575000.423 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:43:20.421Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:43:20.425Z,1422575000.425 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:43:20.424Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:43:20.428Z,1422575000.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:43:20.805Z,1422575000.805 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:43:20.819Z,1422575000.819 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:43:20.818Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:43:20.822Z,1422575000.822 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:43:20.820Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:43:20.824Z,1422575000.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:43:21.206Z,1422575001.206 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:43:21.221Z,1422575001.221 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:43:21.219Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:43:21.223Z,1422575001.223 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:43:21.222Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:43:21.225Z,1422575001.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:43:21.610Z,1422575001.610 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:43:21.624Z,1422575001.624 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:43:21.623Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:43:21.626Z,1422575001.626 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:43:21.625Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:43:21.629Z,1422575001.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:43:22.011Z,1422575002.011 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:43:22.025Z,1422575002.025 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:43:22.023Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:43:22.027Z,1422575002.027 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:43:22.026Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:43:22.029Z,1422575002.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:43:22.404Z,1422575002.404 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:43:22.419Z,1422575002.419 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:43:22.417Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:43:22.421Z,1422575002.421 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:43:22.420Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:43:22.423Z,1422575002.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:43:22.804Z,1422575002.804 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:43:22.836Z,1422575002.836 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:43:22.835Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:43:22.839Z,1422575002.839 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:43:22.837Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:43:22.841Z,1422575002.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:43:23.213Z,1422575003.213 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:43:23.244Z,1422575003.244 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:43:23.242Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:43:23.246Z,1422575003.246 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:43:23.245Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:43:23.248Z,1422575003.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:43:23.605Z,1422575003.605 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:43:23.621Z,1422575003.621 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:43:23.619Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:43:23.623Z,1422575003.623 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:43:23.622Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:43:23.625Z,1422575003.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:43:24.014Z,1422575004.014 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:43:24.046Z,1422575004.046 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:43:24.045Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:43:24.067Z,1422575004.067 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:43:24.047Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:43:24.069Z,1422575004.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:43:24.406Z,1422575004.406 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:43:24.421Z,1422575004.421 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:43:24.419Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:43:24.423Z,1422575004.423 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:43:24.422Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:43:24.426Z,1422575004.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:43:24.801Z,1422575004.801 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:43:24.822Z,1422575004.822 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:43:24.820Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:43:24.824Z,1422575004.824 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:43:24.823Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:43:24.826Z,1422575004.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:43:25.204Z,1422575005.204 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:43:25.218Z,1422575005.218 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:43:25.217Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:43:25.221Z,1422575005.221 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:43:25.219Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:43:25.223Z,1422575005.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:43:25.609Z,1422575005.609 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:43:25.623Z,1422575005.623 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:43:25.622Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:43:25.626Z,1422575005.626 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:43:25.624Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:43:25.628Z,1422575005.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:43:26.005Z,1422575006.005 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:43:26.036Z,1422575006.036 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:43:26.035Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:43:26.039Z,1422575006.039 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:43:26.037Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:43:26.041Z,1422575006.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:43:26.405Z,1422575006.405 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:43:26.436Z,1422575006.436 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:43:26.434Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:43:26.438Z,1422575006.438 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:43:26.437Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:43:26.440Z,1422575006.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:43:26.806Z,1422575006.806 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:43:26.835Z,1422575006.835 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:43:26.834Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:43:26.838Z,1422575006.838 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:43:26.836Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:43:26.840Z,1422575006.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:43:27.207Z,1422575007.207 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:43:27.235Z,1422575007.235 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:43:27.234Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:43:27.238Z,1422575007.238 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:43:27.236Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:43:27.240Z,1422575007.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:43:27.607Z,1422575007.607 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:43:27.629Z,1422575007.629 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:43:27.627Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:43:27.631Z,1422575007.631 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:43:27.630Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:43:27.633Z,1422575007.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:43:28.008Z,1422575008.008 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:43:28.032Z,1422575008.032 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:43:28.030Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:43:28.034Z,1422575008.034 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:43:28.033Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:43:28.036Z,1422575008.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:43:28.404Z,1422575008.404 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:43:28.438Z,1422575008.438 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:43:28.436Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:43:28.440Z,1422575008.440 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:43:28.439Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:43:28.442Z,1422575008.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:43:28.805Z,1422575008.805 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:43:28.827Z,1422575008.827 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:43:28.825Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:43:28.829Z,1422575008.829 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:43:28.828Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:43:28.831Z,1422575008.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:43:29.214Z,1422575009.214 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:43:29.283Z,1422575009.283 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:43:29.282Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:43:29.285Z,1422575009.285 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:43:29.284Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:43:29.290Z,1422575009.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:43:29.606Z,1422575009.606 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:43:29.638Z,1422575009.638 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:43:29.636Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:43:29.640Z,1422575009.640 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:43:29.639Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:43:29.643Z,1422575009.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:43:30.003Z,1422575010.003 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:43:30.017Z,1422575010.017 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:43:30.016Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:43:30.019Z,1422575010.019 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:43:30.018Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:43:30.038Z,1422575010.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:43:30.408Z,1422575010.408 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:43:30.480Z,1422575010.480 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:43:30.478Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:43:30.482Z,1422575010.482 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:43:30.481Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:43:30.484Z,1422575010.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:43:30.799Z,1422575010.799 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:43:30.813Z,1422575010.813 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:43:30.812Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:43:30.815Z,1422575010.815 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:43:30.814Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:43:30.818Z,1422575010.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:43:31.206Z,1422575011.206 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:43:31.262Z,1422575011.262 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:43:31.261Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:43:31.265Z,1422575011.265 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:43:31.264Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:43:31.267Z,1422575011.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:43:31.607Z,1422575011.607 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:43:31.622Z,1422575011.622 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:43:31.620Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:43:31.643Z,1422575011.643 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:43:31.623Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:43:31.646Z,1422575011.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:43:32.006Z,1422575012.006 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:43:32.064Z,1422575012.064 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:43:32.062Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:43:32.066Z,1422575012.066 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:43:32.065Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:43:32.068Z,1422575012.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:43:32.407Z,1422575012.407 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:43:32.488Z,1422575012.488 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:43:32.487Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:43:32.491Z,1422575012.491 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:43:32.490Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:43:32.493Z,1422575012.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:43:32.800Z,1422575012.800 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:43:32.820Z,1422575012.820 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:43:32.819Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:43:32.823Z,1422575012.823 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:43:32.821Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:43:32.825Z,1422575012.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:43:33.208Z,1422575013.208 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:43:33.222Z,1422575013.222 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:43:33.221Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:43:33.224Z,1422575013.224 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:43:33.223Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:43:33.247Z,1422575013.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:43:33.608Z,1422575013.608 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:43:33.650Z,1422575013.650 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:43:33.648Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:43:33.652Z,1422575013.652 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:43:33.651Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:43:33.654Z,1422575013.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:43:34.009Z,1422575014.009 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:43:34.024Z,1422575014.024 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:43:34.022Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:43:34.026Z,1422575014.026 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:43:34.025Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:43:34.045Z,1422575014.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:43:34.410Z,1422575014.410 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:43:34.455Z,1422575014.455 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:43:34.453Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:43:34.457Z,1422575014.457 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:43:34.456Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:43:34.459Z,1422575014.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:43:34.803Z,1422575014.803 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:43:34.817Z,1422575014.817 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:43:34.815Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:43:34.819Z,1422575014.819 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:43:34.818Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:43:34.822Z,1422575014.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:43:35.204Z,1422575015.204 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:43:35.218Z,1422575015.218 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:43:35.217Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:43:35.221Z,1422575015.221 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:43:35.219Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:43:35.223Z,1422575015.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:43:35.601Z,1422575015.601 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:43:35.649Z,1422575015.649 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:43:35.647Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:43:35.655Z,1422575015.655 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:43:35.650Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:43:35.657Z,1422575015.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:43:36.000Z,1422575016.000 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:43:36.018Z,1422575016.018 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:43:36.016Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:43:36.020Z,1422575016.020 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:43:36.019Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:43:36.022Z,1422575016.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:43:36.410Z,1422575016.410 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:43:36.424Z,1422575016.424 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:43:36.422Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:43:36.426Z,1422575016.426 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:43:36.425Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:43:36.429Z,1422575016.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:43:36.810Z,1422575016.810 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:43:36.824Z,1422575016.824 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:43:36.823Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:43:36.826Z,1422575016.826 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:43:36.825Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:43:36.829Z,1422575016.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:43:37.206Z,1422575017.206 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:43:37.221Z,1422575017.221 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:43:37.219Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:43:37.223Z,1422575017.223 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:43:37.222Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:43:37.225Z,1422575017.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:43:37.607Z,1422575017.607 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:43:37.622Z,1422575017.622 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:43:37.620Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:43:37.624Z,1422575017.624 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:43:37.623Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:43:37.627Z,1422575017.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:43:38.007Z,1422575018.007 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:43:38.022Z,1422575018.022 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:43:38.020Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:43:38.024Z,1422575018.024 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:43:38.023Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:43:38.026Z,1422575018.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:43:38.408Z,1422575018.408 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:43:38.422Z,1422575018.422 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:43:38.421Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:43:38.425Z,1422575018.425 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:43:38.423Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:43:38.427Z,1422575018.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:43:38.809Z,1422575018.809 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:43:38.882Z,1422575018.882 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:43:38.880Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:43:38.888Z,1422575018.888 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:43:38.883Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:43:38.890Z,1422575018.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:43:39.209Z,1422575019.209 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:43:39.226Z,1422575019.226 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:43:39.224Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:43:39.228Z,1422575019.228 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:43:39.227Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:43:39.230Z,1422575019.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:43:39.607Z,1422575019.607 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:43:39.654Z,1422575019.654 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:43:39.653Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:43:39.656Z,1422575019.656 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:43:39.655Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:43:39.659Z,1422575019.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:43:40.007Z,1422575020.007 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:43:40.021Z,1422575020.021 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:43:40.020Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:43:40.023Z,1422575020.023 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:43:40.022Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:43:40.026Z,1422575020.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:43:40.405Z,1422575020.405 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:43:40.419Z,1422575020.419 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:43:40.418Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:43:40.421Z,1422575020.421 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:43:40.420Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:43:40.424Z,1422575020.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:43:40.808Z,1422575020.808 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:43:40.822Z,1422575020.822 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:43:40.820Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:43:40.824Z,1422575020.824 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:43:40.823Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:43:40.827Z,1422575020.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:43:41.209Z,1422575021.209 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:43:41.223Z,1422575021.223 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:43:41.222Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:43:41.225Z,1422575021.225 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:43:41.224Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:43:41.228Z,1422575021.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:43:41.609Z,1422575021.609 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:43:41.623Z,1422575021.623 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:43:41.622Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:43:41.625Z,1422575021.625 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:43:41.624Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:43:41.628Z,1422575021.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:43:42.006Z,1422575022.006 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:43:42.036Z,1422575022.036 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:43:42.035Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:43:42.039Z,1422575022.039 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:43:42.037Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:43:42.058Z,1422575022.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:43:42.406Z,1422575022.406 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:43:42.427Z,1422575022.427 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:43:42.426Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:43:42.430Z,1422575022.430 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:43:42.428Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:43:42.432Z,1422575022.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:43:42.807Z,1422575022.807 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:43:42.821Z,1422575022.821 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:43:42.820Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:43:42.823Z,1422575022.823 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:43:42.822Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:43:42.826Z,1422575022.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:43:43.211Z,1422575023.211 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:43:43.225Z,1422575023.225 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:43:43.224Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:43:43.228Z,1422575023.228 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:43:43.227Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:43:43.230Z,1422575023.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:43:43.606Z,1422575023.606 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:43:43.621Z,1422575023.621 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:43:43.619Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:43:43.623Z,1422575023.623 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:43:43.622Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:43:43.625Z,1422575023.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:43:44.009Z,1422575024.009 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:43:44.042Z,1422575024.042 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:43:44.040Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:43:44.063Z,1422575024.063 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:43:44.043Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:43:44.065Z,1422575024.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:43:44.409Z,1422575024.409 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:43:44.483Z,1422575024.483 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:43:44.482Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:43:44.490Z,1422575024.490 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:43:44.489Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:43:44.496Z,1422575024.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:43:44.807Z,1422575024.807 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:43:44.839Z,1422575024.839 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:43:44.838Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:43:44.841Z,1422575024.841 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:43:44.840Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:43:44.844Z,1422575024.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:43:45.211Z,1422575025.211 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:43:45.242Z,1422575025.242 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:43:45.240Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:43:45.244Z,1422575025.244 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:43:45.243Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:43:45.267Z,1422575025.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:43:45.608Z,1422575025.608 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:43:45.668Z,1422575025.668 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:43:45.667Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:43:45.671Z,1422575025.671 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:43:45.669Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:43:45.673Z,1422575025.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:43:46.008Z,1422575026.008 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:43:46.022Z,1422575026.022 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:43:46.021Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:43:46.025Z,1422575026.025 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:43:46.023Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:43:46.027Z,1422575026.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:43:46.400Z,1422575026.400 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:43:46.462Z,1422575026.462 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:43:46.461Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:43:46.465Z,1422575026.465 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:43:46.463Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:43:46.467Z,1422575026.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:43:46.809Z,1422575026.809 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:43:46.866Z,1422575026.866 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:43:46.865Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:43:46.869Z,1422575026.869 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:43:46.867Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:43:46.871Z,1422575026.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:43:47.206Z,1422575027.206 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:43:47.223Z,1422575027.223 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:43:47.221Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:43:47.225Z,1422575027.225 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:43:47.224Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:43:47.227Z,1422575027.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:43:47.598Z,1422575027.598 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:43:47.623Z,1422575027.623 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:43:47.622Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:43:47.626Z,1422575027.626 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:43:47.624Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:43:47.628Z,1422575027.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:43:48.007Z,1422575028.007 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:43:48.024Z,1422575028.024 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:43:48.023Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:43:48.027Z,1422575028.027 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:43:48.025Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:43:48.029Z,1422575028.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:43:48.408Z,1422575028.408 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:43:48.439Z,1422575028.439 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:43:48.437Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:43:48.441Z,1422575028.441 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:43:48.440Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:43:48.444Z,1422575028.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:43:48.800Z,1422575028.800 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:43:48.829Z,1422575028.829 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:43:48.828Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:43:48.832Z,1422575028.832 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:43:48.830Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:43:48.834Z,1422575028.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:43:49.205Z,1422575029.205 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:43:49.238Z,1422575029.238 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:43:49.236Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:43:49.240Z,1422575029.240 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:43:49.239Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:43:49.242Z,1422575029.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:43:49.606Z,1422575029.606 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:43:49.631Z,1422575029.631 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:43:49.630Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:43:49.634Z,1422575029.634 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:43:49.633Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:43:49.636Z,1422575029.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:43:50.010Z,1422575030.010 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:43:50.038Z,1422575030.038 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:43:50.036Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:43:50.040Z,1422575030.040 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:43:50.039Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:43:50.042Z,1422575030.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:43:50.399Z,1422575030.399 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:43:50.432Z,1422575030.432 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:43:50.430Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:43:50.435Z,1422575030.435 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:43:50.433Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:43:50.437Z,1422575030.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:43:50.807Z,1422575030.807 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:43:50.831Z,1422575030.831 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:43:50.829Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:43:50.833Z,1422575030.833 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:43:50.832Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:43:50.835Z,1422575030.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:43:51.200Z,1422575031.200 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:43:51.229Z,1422575031.229 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:43:51.228Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:43:51.236Z,1422575031.236 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:43:51.235Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:43:51.242Z,1422575031.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:43:51.608Z,1422575031.608 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:43:51.647Z,1422575031.647 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:43:51.645Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:43:51.649Z,1422575031.649 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:43:51.648Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:43:51.652Z,1422575031.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:43:52.001Z,1422575032.001 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:43:52.039Z,1422575032.039 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:43:52.037Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:43:52.041Z,1422575032.041 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:43:52.040Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:43:52.043Z,1422575032.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:43:52.402Z,1422575032.402 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:43:52.431Z,1422575032.431 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:43:52.430Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:43:52.438Z,1422575032.438 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:43:52.436Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:43:52.444Z,1422575032.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:43:52.806Z,1422575032.806 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:43:52.835Z,1422575032.835 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:43:52.832Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:43:52.837Z,1422575032.837 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:43:52.836Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:43:52.840Z,1422575032.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:43:53.199Z,1422575033.199 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:43:53.215Z,1422575033.215 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:43:53.214Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:43:53.236Z,1422575033.236 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:43:53.216Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:43:53.239Z,1422575033.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:43:53.607Z,1422575033.607 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:43:53.636Z,1422575033.636 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:43:53.634Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:43:53.638Z,1422575033.638 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:43:53.637Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:43:53.640Z,1422575033.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:43:54.004Z,1422575034.004 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:43:54.036Z,1422575034.036 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:43:54.035Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:43:54.039Z,1422575034.039 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:43:54.037Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:43:54.041Z,1422575034.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:43:54.401Z,1422575034.401 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:43:54.443Z,1422575034.443 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:43:54.442Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:43:54.445Z,1422575034.445 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:43:54.444Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:43:54.448Z,1422575034.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:43:54.806Z,1422575034.806 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:43:54.846Z,1422575034.846 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:43:54.845Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:43:54.849Z,1422575034.849 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:43:54.847Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:43:54.851Z,1422575034.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:43:55.206Z,1422575035.206 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:43:55.251Z,1422575035.251 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:43:55.250Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:43:55.254Z,1422575035.254 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:43:55.252Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:43:55.256Z,1422575035.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:43:55.607Z,1422575035.607 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:43:55.639Z,1422575035.639 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:43:55.620Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:43:55.641Z,1422575035.641 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:43:55.640Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:43:55.643Z,1422575035.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:43:56.007Z,1422575036.007 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:43:56.038Z,1422575036.038 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:43:56.021Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:43:56.041Z,1422575036.041 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:43:56.039Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:43:56.043Z,1422575036.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:43:56.404Z,1422575036.404 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:43:56.421Z,1422575036.421 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:43:56.419Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:43:56.439Z,1422575036.439 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:43:56.422Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:43:56.441Z,1422575036.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:43:56.809Z,1422575036.809 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:43:56.823Z,1422575036.823 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:43:56.821Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:43:56.844Z,1422575036.844 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:43:56.843Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:43:56.847Z,1422575036.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:43:57.209Z,1422575037.209 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:43:57.223Z,1422575037.223 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:43:57.222Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:43:57.242Z,1422575037.242 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:43:57.240Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:43:57.248Z,1422575037.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:43:57.607Z,1422575037.607 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:43:57.622Z,1422575037.622 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:43:57.620Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:43:57.640Z,1422575037.640 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:43:57.623Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:43:57.646Z,1422575037.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:43:58.006Z,1422575038.006 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:43:58.066Z,1422575038.066 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:43:58.064Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:43:58.068Z,1422575038.068 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:43:58.067Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:43:58.077Z,1422575038.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:43:58.407Z,1422575038.407 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:43:58.423Z,1422575038.423 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:43:58.422Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:43:58.425Z,1422575038.425 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:43:58.424Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:43:58.428Z,1422575038.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:43:58.807Z,1422575038.807 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:43:58.869Z,1422575038.869 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:43:58.867Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:43:58.871Z,1422575038.871 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:43:58.870Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:43:58.873Z,1422575038.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:43:59.202Z,1422575039.202 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:43:59.259Z,1422575039.259 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:43:59.258Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:43:59.262Z,1422575039.262 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:43:59.260Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:43:59.264Z,1422575039.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:43:59.602Z,1422575039.602 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:43:59.634Z,1422575039.634 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:43:59.633Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:43:59.636Z,1422575039.636 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:43:59.635Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:43:59.639Z,1422575039.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:44:00.009Z,1422575040.009 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:44:00.067Z,1422575040.067 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:44:00.066Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:44:00.070Z,1422575040.070 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:44:00.068Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:44:00.072Z,1422575040.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:44:00.406Z,1422575040.406 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:44:00.433Z,1422575040.433 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:44:00.432Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:44:00.435Z,1422575040.435 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:44:00.434Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:44:00.458Z,1422575040.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:44:00.804Z,1422575040.804 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:44:00.860Z,1422575040.860 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:44:00.858Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:44:00.862Z,1422575040.862 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:44:00.861Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:44:00.864Z,1422575040.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:44:01.211Z,1422575041.211 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:44:01.286Z,1422575041.286 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:44:01.281Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:44:01.289Z,1422575041.289 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:44:01.287Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:44:01.295Z,1422575041.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:44:01.608Z,1422575041.608 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:44:01.624Z,1422575041.624 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:44:01.622Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:44:01.626Z,1422575041.626 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:44:01.625Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:44:01.628Z,1422575041.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:44:02.008Z,1422575042.008 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:44:02.022Z,1422575042.022 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:44:02.021Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:44:02.025Z,1422575042.025 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:44:02.024Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:44:02.027Z,1422575042.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:44:02.409Z,1422575042.409 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:44:02.423Z,1422575042.423 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:44:02.422Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:44:02.426Z,1422575042.426 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:44:02.424Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:44:02.428Z,1422575042.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:44:02.810Z,1422575042.810 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:44:02.824Z,1422575042.824 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:44:02.822Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:44:02.826Z,1422575042.826 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:44:02.825Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:44:02.828Z,1422575042.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:44:03.206Z,1422575043.206 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:44:03.221Z,1422575043.221 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:44:03.219Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:44:03.223Z,1422575043.223 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:44:03.222Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:44:03.225Z,1422575043.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:44:03.607Z,1422575043.607 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:44:03.621Z,1422575043.621 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:44:03.620Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:44:03.623Z,1422575043.623 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:44:03.622Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:44:03.626Z,1422575043.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:44:04.008Z,1422575044.008 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:44:04.021Z,1422575044.021 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:44:04.020Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:44:04.024Z,1422575044.024 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:44:04.022Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:44:04.026Z,1422575044.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:44:04.404Z,1422575044.404 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:44:04.435Z,1422575044.435 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:44:04.433Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:44:04.437Z,1422575044.437 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:44:04.436Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:44:04.440Z,1422575044.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:44:04.808Z,1422575044.808 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:44:04.842Z,1422575044.842 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:44:04.840Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:44:04.844Z,1422575044.844 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:44:04.843Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:44:04.846Z,1422575044.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:44:05.210Z,1422575045.210 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:44:05.224Z,1422575045.224 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:44:05.222Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:44:05.226Z,1422575045.226 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:44:05.225Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:44:05.228Z,1422575045.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:44:05.606Z,1422575045.606 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:44:05.639Z,1422575045.639 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:44:05.638Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:44:05.642Z,1422575045.642 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:44:05.640Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:44:05.644Z,1422575045.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:44:06.007Z,1422575046.007 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:44:06.021Z,1422575046.021 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:44:06.019Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:44:06.023Z,1422575046.023 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:44:06.022Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:44:06.025Z,1422575046.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:44:06.407Z,1422575046.407 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:44:06.421Z,1422575046.421 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:44:06.420Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:44:06.424Z,1422575046.424 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:44:06.422Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:44:06.426Z,1422575046.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:44:06.804Z,1422575046.804 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:44:06.821Z,1422575046.821 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:44:06.819Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:44:06.823Z,1422575046.823 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:44:06.822Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:44:06.826Z,1422575046.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:44:07.209Z,1422575047.209 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:44:07.222Z,1422575047.222 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:44:07.221Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:44:07.225Z,1422575047.225 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:44:07.224Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:44:07.227Z,1422575047.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:44:07.605Z,1422575047.605 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:44:07.635Z,1422575047.635 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:44:07.634Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:44:07.638Z,1422575047.638 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:44:07.636Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:44:07.640Z,1422575047.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:44:08.010Z,1422575048.010 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:44:08.026Z,1422575048.026 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:44:08.024Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:44:08.028Z,1422575048.028 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:44:08.027Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:44:08.030Z,1422575048.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:44:08.406Z,1422575048.406 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:44:08.420Z,1422575048.420 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:44:08.419Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:44:08.423Z,1422575048.423 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:44:08.421Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:44:08.425Z,1422575048.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:44:08.803Z,1422575048.803 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:44:08.820Z,1422575048.820 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:44:08.819Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:44:08.822Z,1422575048.822 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:44:08.821Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:44:08.825Z,1422575048.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:44:09.208Z,1422575049.208 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:44:09.222Z,1422575049.222 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:44:09.220Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:44:09.224Z,1422575049.224 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:44:09.223Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:44:09.227Z,1422575049.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:44:09.608Z,1422575049.608 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:44:09.622Z,1422575049.622 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:44:09.621Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:44:09.625Z,1422575049.625 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:44:09.623Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:44:09.627Z,1422575049.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:44:10.009Z,1422575050.009 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:44:10.042Z,1422575050.042 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:44:10.040Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:44:10.044Z,1422575050.044 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:44:10.043Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:44:10.046Z,1422575050.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:44:10.406Z,1422575050.406 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:44:10.420Z,1422575050.420 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:44:10.419Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:44:10.422Z,1422575050.422 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:44:10.421Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:44:10.425Z,1422575050.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:44:10.810Z,1422575050.810 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:44:10.891Z,1422575050.891 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:44:10.890Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:44:10.898Z,1422575050.898 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:44:10.892Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:44:10.900Z,1422575050.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:44:11.211Z,1422575051.211 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:44:11.226Z,1422575051.226 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:44:11.225Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:44:11.229Z,1422575051.229 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:44:11.227Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:44:11.231Z,1422575051.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:44:11.607Z,1422575051.607 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:44:11.621Z,1422575051.621 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:44:11.620Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:44:11.624Z,1422575051.624 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:44:11.623Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:44:11.626Z,1422575051.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:44:12.008Z,1422575052.008 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:44:12.025Z,1422575052.025 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:44:12.024Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:44:12.027Z,1422575052.027 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:44:12.026Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:44:12.030Z,1422575052.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:44:12.401Z,1422575052.401 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:44:12.426Z,1422575052.426 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:44:12.424Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:44:12.428Z,1422575052.428 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:44:12.427Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:44:12.430Z,1422575052.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:44:12.809Z,1422575052.809 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:44:12.819Z,1422575052.819 [BPC1](ERROR): A bank expecting battery number:1 and read number: uart read:X
$S,01,270F,02,00,04,58%2A
$C1,01,FF,02,FF,03,00,04,00,05,FF,06,00,07,00%72
$B11,0A,05A9%4E
$B12,0A,059D%48
$B13,0A,0582%3E
$B14,0A,05A1%43
$B15,0A,063A%43
$B16,0A,0616%35
$B17,0A,05D6%42
$B18,0A,0633%3C
$S,01,270F,02,00,04,58%2A
$C1,01,FF,02,FF,03,00,04,00,05,FF,06,00,07,00%72
$B11,02,000A,01,02A8,03,0001,08,0BA5,09,4040,0A,05A9,0B,05A9%4D
$B11,0C,0001,0D,0058,0E,0053,0F,15D0,10,18E0,11,FFFF,12,FFFF%42
$B11,13,0041,14,0BB8,15,41A0,16,0080,17,0001,18,1A90,19,3840%47
$B11,1A,0031,1B,458B,1C,0095%46
$B12,02,000A,01,02A8,03,0001,08,0B95,09,403C,0A,059C,0B,059D%45
$B12,0C,0001,0D,0059,0E,0055,0F,1663,10,196C,11,FFFF,12,FFFF%35
$B12,13,0041,14,0BB8,15,41A0,16,0080,17,0001,18,1A90,19,3840%44
$B12,1A,0031,1B,458B,1C,00BE%4E
$B13,02,000A,01,02A8,03,0001,08,0B97,09,4031,0A,0582,0B,0581%30
$B13,0C,0001,0D,0058,0E,0053,0F,15DE,10,18FC,11,FFFF,12,FFFF%45
$B13,13,0044,14,0BB8,15,41A0,16,0080,17,0001,18,1A90,19,3840%40
$B13,1A,0031,1B,458B,1C,0086%46
$B14,02,000A,01,02A8,03,0001,08,0B96,09,4030,0A,05A1,0B,05A2%37
$B14,0C,0001,0D,0058,0E,0053,0F,15E4,10,18F1,11,FFFF,12,FFFF%40
$B14,13,0041,14,0BB8,15,41A0,16,0080,17,0001,18,1A90,19,3840%42
$B14,1A,0031,1B,458B,1C,00AE%4B
$B15,02,000A,01,02A8,03,0001,08,0B97,09,4070,0A,064B,0B,0644%46
$B15,0C,0001,0D,0059,0E,0056,0F,16C3,10,19BB,11,FFFF,12,FFFF%31
$B15,13,003C,14,0BB8,15,41A0,16,0080,17,0001,18,1A90,19,3840%36
$B15,1A,0031,1B,458C,1C,00CB%4E
$B16,02,000A,01,02A8,03,0001,08,0B92,09,4077,0A,05F4,0B,0625%47
$B16,0C,0001,0D,0059,0E,0055,0F,165F,10,1947,11,FFFF,12,FFFF%31
$B16,13,0039,14,0BB8,15,41A0,16,0080,17,0001,18,1A90,19,3840%4F
$B16,1A,0031,1B,458C,1C,00F7%3D
$B17,02,000A,01,02A8,03,0001,08,0B95,09,404A,0A,05D7,0B,05D5%40
$B17,0C,0001,0D,0058,0E,0053,0F,15E3,10,18F1,11,FFFF,12,FFFF%44
$B17,13,003F,14,0BB8,15,41A0,16,0080,17,0001,18,1A90,19,3840%31
$B17,1A,0031,1B,458B,1C,00A1%3C
$B18,02,000A,01,02A8,03,0001,08,0B8F,09,404C,0A,0632,0B,0633%3C
$B18,0C,0001,0D,0058,0E,0053,0F,1603,10,190E,11,FFFF,12,FFFF%3E
$B18,13,003F,14,0BB8,15,41A0,16,0080,17,0001,18,1A90,19,3840%3E
$B18,1A,0031,1B,458C,1C,00F0%34

2015-01-29T23:44:12.819Z,1422575052.819 [BPC1](FAULT): Failed to parse bank A battery data
2015-01-29T23:44:12.819Z,1422575052.819 [BPC1] Data Fault, FailCount= 1
2015-01-29T23:44:12.820Z,1422575052.820 [BPC1](ERROR): Data Fault
2015-01-29T23:44:12.829Z,1422575052.829 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:44:12.827Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:44:12.831Z,1422575052.831 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:44:12.830Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:44:12.834Z,1422575052.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:44:12.839Z,1422575052.839 [Startup:StartupSatComms:A](INFO): Timed out from 2015-01-29T23:43:12.8Z
2015-01-29T23:44:12.840Z,1422575052.840 [Startup:StartupSatComms:A] Stopped
2015-01-29T23:44:12.840Z,1422575052.840 [Startup:StartupSatComms:B] Running Loop=1
2015-01-29T23:44:12.880Z,1422575052.880 [CBIT](ERROR): Data Fault in component: BPC1
2015-01-29T23:44:13.206Z,1422575053.206 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:44:13.221Z,1422575053.221 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:44:13.219Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:44:13.231Z,1422575053.231 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:44:13.229Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:44:13.237Z,1422575053.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:44:13.248Z,1422575053.248 [Startup:StartupSatComms:B](DEBUG): Initialize ReadDataComponent to sense platform_communications
2015-01-29T23:44:13.599Z,1422575053.599 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:44:13.613Z,1422575053.613 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:44:13.612Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:44:13.616Z,1422575053.616 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:44:13.614Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:44:13.618Z,1422575053.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:44:14.007Z,1422575054.007 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:44:14.038Z,1422575054.038 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:44:14.036Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:44:14.040Z,1422575054.040 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:44:14.039Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:44:14.043Z,1422575054.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:44:14.106Z,1422575054.106 [CBIT](INFO): Clearing failed state for component BPC1
2015-01-29T23:44:14.107Z,1422575054.107 [BPC1] No Fault, FailCount= 1
2015-01-29T23:44:14.407Z,1422575054.407 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:44:14.485Z,1422575054.485 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:44:14.484Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:44:14.488Z,1422575054.488 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:44:14.486Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:44:14.490Z,1422575054.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:44:14.808Z,1422575054.808 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:44:14.862Z,1422575054.862 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:44:14.846Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:44:14.864Z,1422575054.864 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:44:14.863Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:44:14.866Z,1422575054.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:44:15.205Z,1422575055.205 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:44:15.238Z,1422575055.238 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:44:15.237Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:44:15.241Z,1422575055.241 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:44:15.239Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:44:15.243Z,1422575055.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:44:15.610Z,1422575055.610 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:44:15.624Z,1422575055.624 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:44:15.622Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:44:15.626Z,1422575055.626 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:44:15.625Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:44:15.628Z,1422575055.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:44:15.998Z,1422575055.998 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:44:16.031Z,1422575056.031 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:44:16.029Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:44:16.033Z,1422575056.033 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:44:16.032Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:44:16.036Z,1422575056.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:44:16.403Z,1422575056.403 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:44:16.417Z,1422575056.417 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:44:16.416Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:44:16.420Z,1422575056.420 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:44:16.418Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:44:16.422Z,1422575056.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:44:16.803Z,1422575056.803 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:44:16.820Z,1422575056.820 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:44:16.819Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:44:16.823Z,1422575056.823 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:44:16.821Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:44:16.825Z,1422575056.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:44:17.204Z,1422575057.204 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:44:17.234Z,1422575057.234 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:44:17.232Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:44:17.236Z,1422575057.236 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:44:17.235Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:44:17.238Z,1422575057.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:44:17.601Z,1422575057.601 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:44:17.626Z,1422575057.626 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:44:17.624Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:44:17.628Z,1422575057.628 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:44:17.627Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:44:17.630Z,1422575057.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:44:18.001Z,1422575058.001 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:44:18.026Z,1422575058.026 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:44:18.025Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:44:18.029Z,1422575058.029 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:44:18.027Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:44:18.031Z,1422575058.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:44:18.413Z,1422575058.413 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:44:18.427Z,1422575058.427 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:44:18.426Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:44:18.430Z,1422575058.430 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:44:18.428Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:44:18.432Z,1422575058.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:44:18.810Z,1422575058.810 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:44:18.824Z,1422575058.824 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:44:18.823Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:44:18.827Z,1422575058.827 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:44:18.826Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:44:18.829Z,1422575058.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:44:19.211Z,1422575059.211 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:44:19.225Z,1422575059.225 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:44:19.223Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:44:19.227Z,1422575059.227 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:44:19.226Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:44:19.229Z,1422575059.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:44:19.600Z,1422575059.600 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:44:19.632Z,1422575059.632 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:44:19.631Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:44:19.635Z,1422575059.635 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:44:19.633Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:44:19.637Z,1422575059.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:44:20.012Z,1422575060.012 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:44:20.088Z,1422575060.088 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:44:20.086Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:44:20.090Z,1422575060.090 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:44:20.089Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:44:20.092Z,1422575060.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:44:20.409Z,1422575060.409 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:44:20.482Z,1422575060.482 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:44:20.481Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:44:20.489Z,1422575060.489 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:44:20.483Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:44:20.491Z,1422575060.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:44:20.803Z,1422575060.803 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:44:20.830Z,1422575060.830 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:44:20.829Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:44:20.833Z,1422575060.833 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:44:20.831Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:44:20.835Z,1422575060.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:44:21.200Z,1422575061.200 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:44:21.239Z,1422575061.239 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:44:21.238Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:44:21.242Z,1422575061.242 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:44:21.240Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:44:21.244Z,1422575061.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:44:21.607Z,1422575061.607 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:44:21.628Z,1422575061.628 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:44:21.626Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:44:21.630Z,1422575061.630 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:44:21.629Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:44:21.632Z,1422575061.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:44:21.000Z,1422575062.000 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:44:22.027Z,1422575062.027 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:44:22.026Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:44:22.030Z,1422575062.030 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:44:22.028Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:44:22.032Z,1422575062.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:44:22.408Z,1422575062.408 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:44:22.430Z,1422575062.430 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:44:22.428Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:44:22.432Z,1422575062.432 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:44:22.431Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:44:22.434Z,1422575062.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:44:22.801Z,1422575062.801 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:44:22.830Z,1422575062.830 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:44:22.829Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:44:22.838Z,1422575062.838 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:44:22.831Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:44:22.841Z,1422575062.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:44:23.210Z,1422575063.210 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:44:23.231Z,1422575063.231 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:44:23.230Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:44:23.234Z,1422575063.234 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:44:23.233Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:44:23.236Z,1422575063.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:44:23.602Z,1422575063.602 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:44:23.643Z,1422575063.643 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:44:23.642Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:44:23.646Z,1422575063.646 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:44:23.645Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:44:23.649Z,1422575063.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:44:23.999Z,1422575063.999 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:44:24.030Z,1422575064.030 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:44:24.029Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:44:24.032Z,1422575064.032 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:44:24.031Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:44:24.035Z,1422575064.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:44:24.399Z,1422575064.399 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:44:24.431Z,1422575064.431 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:44:24.429Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:44:24.433Z,1422575064.433 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:44:24.432Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:44:24.435Z,1422575064.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:44:24.800Z,1422575064.800 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:44:24.832Z,1422575064.832 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:44:24.830Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:44:24.834Z,1422575064.834 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:44:24.833Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:44:24.836Z,1422575064.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:44:25.206Z,1422575065.206 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:44:25.221Z,1422575065.221 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:44:25.219Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:44:25.223Z,1422575065.223 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:44:25.222Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:44:25.225Z,1422575065.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:44:25.605Z,1422575065.605 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:44:25.647Z,1422575065.647 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:44:25.645Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:44:25.649Z,1422575065.649 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:44:25.648Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:44:25.652Z,1422575065.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:44:26.010Z,1422575066.010 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:44:26.024Z,1422575066.024 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:44:26.022Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:44:26.043Z,1422575066.043 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:44:26.041Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:44:26.045Z,1422575066.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:44:26.406Z,1422575066.406 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:44:26.440Z,1422575066.440 [BPC1](ERROR): B bank expecting battery number:1 and read number: uart read:X
$S,01,270F,02,00,04,58%2A
$C1,01,FF,02,FF,03,00,04,00,05,FF,06,00,07,00%72
$B11,0A,05A8%4F
$B12,0A,059B%4E
$B13,0A,0582%3E
$B14,0A,059F%4C
$B15,0A,063B%40
$B16,0A,0618%3B
$B17,0A,05D9%4D
$B18,0A,062F%48
$S,01,270F,02,00,04,58%2A
$C1,01,FF,02,FF,03,00,04,00,05,FF,06,00,07,00%72
$B11,02,000A,01,02A8,03,0001,08,0BA5,09,404F,0A,05A8,0B,05A8%3B
$B11,0C,0001,0D,0058,0E,0053,0F,15DB,10,18E0,11,FFFF,12,FFFF%30
$B11,13,0040,14,0BB8,15,41A0,16,0084,17,0001,18,1A90,19,3840%42
$B11,1A,0031,1B,458B,1C,0095%46
$B12,02,000A,01,02A8,03,0001,08,0B95,09,4050,0A,059B,0B,059C%36
$B12,0C,0001,0D,0059,0E,0055,0F,166F,10,196C,11,FFFF,12,FFFF%40
$B12,13,0040,14,0BB8,15,41A0,16,0080,17,0001,18,1A90,19,3840%45
$B12,1A,0031,1B,458B,1C,00BE%4E
$B13,02,000A,01,02A8,03,0001,08,0B97,09,403F,0A,0581,0B,0581%44
$B13,0C,0001,0D,0058,0E,0053,0F,15E9,10,18FC,11,FFFF,12,FFFF%38
$B13,13,0043,14,0BB8,15,41A0,16,0080,17,0001,18,1A90,19,3840%47
$B13,1A,0031,1B,458B,1C,0086%46
$B14,02,000A,01,02A8,03,0001,08,0B97,09,4041,0A,059F,0B,059F%33
$B14,0C,0001,0D,0058,0E,0053,0F,15F0,10,18F1,11,FFFF,12,FFFF%47
$B14,13,0040,14,0BB8,15,41A0,16,0080,17,0001,18,1A90,19,3840%43
$B14,1A,0031,1B,458B,1C,00AE%4B
$B15,02,000A,01,02A8,03,0001,08,0B97,09,4085,0A,0649,0B,0642%31
$B15,0C,0001,0D,0059,0E,0056,0F,16D0,10,19BB,11,FFFF,12,FFFF%35
$B15,13,003B,14,0BB8,15,41A0,16,0080,17,0001,18,1A90,19,3840%37
$B15,1A,0031,1B,458C,1C,00CB%4E
$B16,02,000A,01,02A8,03,0001,08,0B92,09,4088,0A,062C,0B,0625%47
$B16,0C,0001,0D,0059,0E,0054,0F,164B,10,195D,11,FFFF,12,FFFF%47
$B16,13,24D8,14,0BB8,15,41A0,16,00C0,17,0001,18,1A90,19,3840%44
$B16,1A,0031,1B,458F,1C,015E%38
$B17,02,000A,01,02A8,03,0001,08,0B8F,09,3F0C,0A,0007,0B,0005%45
$B17,0C,0001,0D,0058,0E,0054,0F,1614,10,1955,11,FFFF,12,FFFF%45
$B17,13,270C,14,0BB8,15,41A0,16,00C0,17,0001,18,1A90,19,3840%49
$B17,1A,0031,1B,458B,1C,00A1%3C
$B18,02,000A,01,02A8,03,0001,08,0B8F,09,404C,0A,0632,0B,0633%3C
$B18,0C,0001,0D,0058,0E,0053,0F,1603,10,190E,11,FFFF,12,FFFF%3E
$B18,13,003F,14,0BB8,15,41A0,16,0080,17,0001,18,1A90,19,3840%3E
$B18,1A,0031,1B,458C,1C,00F0%34

2015-01-29T23:44:26.441Z,1422575066.441 [BPC1](FAULT): Failed to parse bank B battery data
2015-01-29T23:44:26.441Z,1422575066.441 [BPC1] Data Fault, FailCount= 2
2015-01-29T23:44:26.441Z,1422575066.441 [BPC1](ERROR): Data Fault
2015-01-29T23:44:26.450Z,1422575066.450 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:44:26.449Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:44:26.453Z,1422575066.453 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:44:26.451Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:44:26.455Z,1422575066.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:44:26.498Z,1422575066.498 [CBIT](ERROR): Data Fault in component: BPC1
2015-01-29T23:44:26.807Z,1422575066.807 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:44:26.839Z,1422575066.839 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:44:26.837Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:44:26.841Z,1422575066.841 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:44:26.840Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:44:26.843Z,1422575066.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:44:27.208Z,1422575067.208 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:44:27.225Z,1422575067.225 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:44:27.223Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:44:27.243Z,1422575067.243 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:44:27.226Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:44:27.245Z,1422575067.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:44:27.608Z,1422575067.608 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:44:27.622Z,1422575067.622 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:44:27.621Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:44:27.625Z,1422575067.625 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:44:27.623Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:44:27.643Z,1422575067.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:44:27.695Z,1422575067.695 [CBIT](INFO): Clearing failed state for component BPC1
2015-01-29T23:44:27.695Z,1422575067.695 [BPC1] No Fault, FailCount= 2
2015-01-29T23:44:28.001Z,1422575068.001 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:44:28.084Z,1422575068.084 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:44:28.082Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:44:28.086Z,1422575068.086 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:44:28.085Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:44:28.088Z,1422575068.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:44:28.407Z,1422575068.407 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:44:28.422Z,1422575068.422 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:44:28.421Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:44:28.424Z,1422575068.424 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:44:28.423Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:44:28.427Z,1422575068.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:44:28.806Z,1422575068.806 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:44:28.852Z,1422575068.852 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:44:28.850Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:44:28.854Z,1422575068.854 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:44:28.853Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:44:28.857Z,1422575068.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:44:29.200Z,1422575069.200 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:44:29.219Z,1422575069.219 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:44:29.218Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:44:29.222Z,1422575069.222 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:44:29.220Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:44:29.224Z,1422575069.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:44:29.597Z,1422575069.597 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:44:29.613Z,1422575069.613 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:44:29.612Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:44:29.616Z,1422575069.616 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:44:29.614Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:44:29.618Z,1422575069.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:44:30.009Z,1422575070.009 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:44:30.077Z,1422575070.077 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:44:30.075Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:44:30.083Z,1422575070.083 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:44:30.078Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:44:30.085Z,1422575070.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:44:30.402Z,1422575070.402 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:44:30.420Z,1422575070.420 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:44:30.419Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:44:30.423Z,1422575070.423 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:44:30.421Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:44:30.425Z,1422575070.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:44:30.803Z,1422575070.803 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:44:30.850Z,1422575070.850 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:44:30.848Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:44:30.852Z,1422575070.852 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:44:30.851Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:44:30.854Z,1422575070.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:44:31.202Z,1422575071.202 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:44:31.219Z,1422575071.219 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:44:31.217Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:44:31.223Z,1422575071.223 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:44:31.220Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:44:31.225Z,1422575071.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:44:31.607Z,1422575071.607 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:44:31.652Z,1422575071.652 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:44:31.651Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:44:31.654Z,1422575071.654 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:44:31.653Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:44:31.657Z,1422575071.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:44:31.997Z,1422575071.997 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:44:32.011Z,1422575072.011 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:44:32.010Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:44:32.014Z,1422575072.014 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:44:32.012Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:44:32.016Z,1422575072.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:44:32.400Z,1422575072.400 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:44:32.416Z,1422575072.416 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:44:32.415Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:44:32.419Z,1422575072.419 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:44:32.417Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:44:32.421Z,1422575072.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:44:32.808Z,1422575072.808 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:44:32.822Z,1422575072.822 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:44:32.821Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:44:32.825Z,1422575072.825 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:44:32.824Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:44:32.827Z,1422575072.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:44:33.203Z,1422575073.203 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:44:33.251Z,1422575073.251 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:44:33.249Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:44:33.258Z,1422575073.258 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:44:33.257Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:44:33.264Z,1422575073.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:44:33.609Z,1422575073.609 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:44:33.625Z,1422575073.625 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:44:33.624Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:44:33.628Z,1422575073.628 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:44:33.626Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:44:33.630Z,1422575073.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:44:34.006Z,1422575074.006 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:44:34.020Z,1422575074.020 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:44:34.019Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:44:34.022Z,1422575074.022 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:44:34.021Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:44:34.025Z,1422575074.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:44:34.407Z,1422575074.407 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:44:34.421Z,1422575074.421 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:44:34.419Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:44:34.423Z,1422575074.423 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:44:34.422Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:44:34.426Z,1422575074.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:44:34.807Z,1422575074.807 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:44:34.821Z,1422575074.821 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:44:34.820Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:44:34.824Z,1422575074.824 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:44:34.822Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:44:34.826Z,1422575074.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:44:35.208Z,1422575075.208 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:44:35.222Z,1422575075.222 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:44:35.220Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:44:35.224Z,1422575075.224 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:44:35.223Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:44:35.226Z,1422575075.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:44:35.601Z,1422575075.601 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:44:35.615Z,1422575075.615 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:44:35.614Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:44:35.617Z,1422575075.617 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:44:35.616Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:44:35.620Z,1422575075.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:44:36.009Z,1422575076.009 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:44:36.060Z,1422575076.060 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:44:36.058Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:44:36.062Z,1422575076.062 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:44:36.061Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:44:36.064Z,1422575076.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:44:36.410Z,1422575076.410 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:44:36.441Z,1422575076.441 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:44:36.440Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:44:36.443Z,1422575076.443 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:44:36.442Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:44:36.478Z,1422575076.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:44:36.799Z,1422575076.799 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:44:36.840Z,1422575076.840 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:44:36.838Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:44:36.842Z,1422575076.842 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:44:36.841Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:44:36.844Z,1422575076.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:44:37.207Z,1422575077.207 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:44:37.221Z,1422575077.221 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:44:37.219Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:44:37.223Z,1422575077.223 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:44:37.222Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:44:37.226Z,1422575077.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:44:37.600Z,1422575077.600 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:44:37.625Z,1422575077.625 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:44:37.623Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:44:37.627Z,1422575077.627 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:44:37.626Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:44:37.629Z,1422575077.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:44:38.000Z,1422575078.000 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:44:38.025Z,1422575078.025 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:44:38.024Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:44:38.028Z,1422575078.028 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:44:38.026Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:44:38.030Z,1422575078.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:44:38.417Z,1422575078.417 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:44:38.431Z,1422575078.431 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:44:38.430Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:44:38.434Z,1422575078.434 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:44:38.432Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:44:38.436Z,1422575078.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:44:38.805Z,1422575078.805 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:44:38.822Z,1422575078.822 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:44:38.821Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:44:38.825Z,1422575078.825 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:44:38.823Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:44:38.827Z,1422575078.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:44:39.210Z,1422575079.210 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:44:39.224Z,1422575079.224 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:44:39.223Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:44:39.226Z,1422575079.226 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:44:39.225Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:44:39.229Z,1422575079.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:44:39.599Z,1422575079.599 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:44:39.636Z,1422575079.636 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:44:39.634Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:44:39.638Z,1422575079.638 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:44:39.637Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:44:39.640Z,1422575079.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:44:39.000Z,1422575080.000 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:44:40.029Z,1422575080.029 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:44:40.027Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:44:40.031Z,1422575080.031 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:44:40.030Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:44:40.033Z,1422575080.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:44:40.412Z,1422575080.412 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:44:40.426Z,1422575080.426 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:44:40.425Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:44:40.428Z,1422575080.428 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:44:40.427Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:44:40.431Z,1422575080.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:44:40.805Z,1422575080.805 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:44:40.874Z,1422575080.874 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:44:40.873Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:44:40.881Z,1422575080.881 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:44:40.880Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:44:40.887Z,1422575080.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:44:41.213Z,1422575081.213 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:44:41.285Z,1422575081.285 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:44:41.258Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:44:41.287Z,1422575081.287 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:44:41.286Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:44:41.290Z,1422575081.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:44:41.600Z,1422575081.600 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:44:41.622Z,1422575081.622 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:44:41.621Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:44:41.629Z,1422575081.629 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:44:41.623Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:44:41.631Z,1422575081.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:44:42.006Z,1422575082.006 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:44:42.077Z,1422575082.077 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:44:42.076Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:44:42.079Z,1422575082.079 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:44:42.078Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:44:42.082Z,1422575082.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:44:42.399Z,1422575082.399 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:44:42.431Z,1422575082.431 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:44:42.430Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:44:42.434Z,1422575082.434 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:44:42.432Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:44:42.436Z,1422575082.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:44:42.797Z,1422575082.797 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:44:42.878Z,1422575082.878 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:44:42.876Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:44:42.880Z,1422575082.880 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:44:42.879Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:44:42.882Z,1422575082.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:44:43.200Z,1422575083.200 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:44:43.254Z,1422575083.254 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:44:43.253Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:44:43.257Z,1422575083.257 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:44:43.255Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:44:43.259Z,1422575083.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:44:43.609Z,1422575083.609 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:44:43.634Z,1422575083.634 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:44:43.633Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:44:43.636Z,1422575083.636 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:44:43.635Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:44:43.638Z,1422575083.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:44:43.999Z,1422575083.999 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:44:44.026Z,1422575084.026 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:44:44.024Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:44:44.030Z,1422575084.030 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:44:44.029Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:44:44.033Z,1422575084.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:44:44.406Z,1422575084.406 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:44:44.434Z,1422575084.434 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:44:44.432Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:44:44.436Z,1422575084.436 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:44:44.435Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:44:44.439Z,1422575084.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:44:44.799Z,1422575084.799 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:44:44.831Z,1422575084.831 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:44:44.829Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:44:44.833Z,1422575084.833 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:44:44.832Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:44:44.835Z,1422575084.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:44:45.201Z,1422575085.201 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:44:45.232Z,1422575085.232 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:44:45.231Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:44:45.235Z,1422575085.235 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:44:45.233Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:44:45.237Z,1422575085.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:44:45.600Z,1422575085.600 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:44:45.625Z,1422575085.625 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:44:45.624Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:44:45.632Z,1422575085.632 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:44:45.626Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:44:45.634Z,1422575085.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:44:46.002Z,1422575086.002 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:44:46.067Z,1422575086.067 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:44:46.065Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:44:46.079Z,1422575086.079 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:44:46.078Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:44:46.082Z,1422575086.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:44:46.409Z,1422575086.409 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:44:46.437Z,1422575086.437 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:44:46.436Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:44:46.439Z,1422575086.439 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:44:46.438Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:44:46.442Z,1422575086.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:44:46.798Z,1422575086.798 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:44:46.815Z,1422575086.815 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:44:46.814Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:44:46.829Z,1422575086.829 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:44:46.816Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:44:46.832Z,1422575086.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:44:47.207Z,1422575087.207 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:44:47.237Z,1422575087.237 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:44:47.236Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:44:47.240Z,1422575087.240 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:44:47.238Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:44:47.242Z,1422575087.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:44:47.597Z,1422575087.597 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:44:47.611Z,1422575087.611 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:44:47.610Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:44:47.614Z,1422575087.614 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:44:47.612Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:44:47.616Z,1422575087.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:44:48.001Z,1422575088.001 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:44:48.016Z,1422575088.016 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:44:48.014Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:44:48.018Z,1422575088.018 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:44:48.017Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:44:48.028Z,1422575088.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:44:48.402Z,1422575088.402 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:44:48.416Z,1422575088.416 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:44:48.415Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:44:48.418Z,1422575088.418 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:44:48.417Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:44:48.444Z,1422575088.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:44:48.799Z,1422575088.799 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:44:48.813Z,1422575088.813 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:44:48.812Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:44:48.816Z,1422575088.816 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:44:48.814Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:44:48.818Z,1422575088.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:44:49.207Z,1422575089.207 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:44:49.263Z,1422575089.263 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:44:49.262Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:44:49.270Z,1422575089.270 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:44:49.268Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:44:49.276Z,1422575089.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:44:49.606Z,1422575089.606 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:44:49.622Z,1422575089.622 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:44:49.621Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:44:49.624Z,1422575089.624 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:44:49.623Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:44:49.646Z,1422575089.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:44:49.997Z,1422575089.997 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:44:50.011Z,1422575090.011 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:44:50.010Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:44:50.013Z,1422575090.013 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:44:50.012Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:44:50.016Z,1422575090.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:44:50.405Z,1422575090.405 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:44:50.420Z,1422575090.420 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:44:50.418Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:44:50.422Z,1422575090.422 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:44:50.420Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:44:50.424Z,1422575090.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:44:50.802Z,1422575090.802 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:44:50.816Z,1422575090.816 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:44:50.815Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:44:50.819Z,1422575090.819 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:44:50.817Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:44:50.821Z,1422575090.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:44:51.209Z,1422575091.209 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:44:51.238Z,1422575091.238 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:44:51.222Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:44:51.241Z,1422575091.241 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:44:51.240Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:44:51.243Z,1422575091.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:44:51.609Z,1422575091.609 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:44:51.655Z,1422575091.655 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:44:51.653Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:44:51.657Z,1422575091.657 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:44:51.656Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:44:51.659Z,1422575091.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:44:52.002Z,1422575092.002 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:44:52.019Z,1422575092.019 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:44:52.017Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:44:52.021Z,1422575092.021 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:44:52.020Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:44:52.023Z,1422575092.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:44:52.407Z,1422575092.407 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:44:52.460Z,1422575092.460 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:44:52.459Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:44:52.463Z,1422575092.463 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:44:52.461Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:44:52.465Z,1422575092.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:44:52.811Z,1422575092.811 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:44:52.828Z,1422575092.828 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:44:52.827Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:44:52.849Z,1422575092.849 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:44:52.829Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:44:52.851Z,1422575092.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:44:53.202Z,1422575093.202 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:44:53.216Z,1422575093.216 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:44:53.215Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:44:53.218Z,1422575093.218 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:44:53.217Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:44:53.221Z,1422575093.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:44:53.602Z,1422575093.602 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:44:53.616Z,1422575093.616 [CommandLine](IMPORTANT): got command failComponent none AHRS_sp3003D
2015-01-29T23:44:53.616Z,1422575093.616 [AHRS_sp3003D] No Fault, FailCount= 9
2015-01-29T23:44:53.616Z,1422575093.616 [CommandLine](IMPORTANT): AHRS_sp3003D failureMode is No Fault
2015-01-29T23:44:53.619Z,1422575093.619 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:44:53.617Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:44:53.621Z,1422575093.621 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:44:53.620Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:44:53.624Z,1422575093.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:44:54.001Z,1422575094.001 [AHRS_sp3003D](DEBUG): Initializing AHRS_sp3003D.
2015-01-29T23:44:54.005Z,1422575094.005 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:44:54.020Z,1422575094.020 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:44:54.018Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:44:54.022Z,1422575094.022 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:44:54.021Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:44:54.024Z,1422575094.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:44:54.408Z,1422575094.408 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:44:54.422Z,1422575094.422 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:44:54.421Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:44:54.425Z,1422575094.425 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:44:54.423Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:44:54.427Z,1422575094.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:44:54.807Z,1422575094.807 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:44:54.821Z,1422575094.821 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:44:54.820Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:44:54.823Z,1422575094.823 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:44:54.822Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:44:54.826Z,1422575094.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:44:55.291Z,1422575095.291 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:44:55.356Z,1422575095.356 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:44:55.355Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:44:55.362Z,1422575095.362 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:44:55.357Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:44:55.365Z,1422575095.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:44:55.917Z,1422575095.917 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:44:55.985Z,1422575095.985 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:44:55.984Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:44:55.999Z,1422575095.999 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:44:55.986Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:44:56.001Z,1422575096.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:44:56.381Z,1422575096.381 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:44:56.410Z,1422575096.410 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:44:56.409Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:44:56.413Z,1422575096.413 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:44:56.412Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:44:56.415Z,1422575096.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:44:56.826Z,1422575096.826 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:44:56.863Z,1422575096.863 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:44:56.861Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:44:56.865Z,1422575096.865 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:44:56.864Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:44:56.868Z,1422575096.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:44:57.262Z,1422575097.262 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:44:57.277Z,1422575097.277 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:44:57.275Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:44:57.279Z,1422575097.279 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:44:57.278Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:44:57.281Z,1422575097.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:44:57.696Z,1422575097.696 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:44:57.729Z,1422575097.729 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:44:57.727Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:44:57.731Z,1422575097.731 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:44:57.730Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:44:57.733Z,1422575097.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:44:58.147Z,1422575098.147 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:44:58.162Z,1422575098.162 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:44:58.160Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:44:58.164Z,1422575098.164 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:44:58.163Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:44:58.166Z,1422575098.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:44:58.560Z,1422575098.560 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:44:58.567Z,1422575098.567 [BPC1](FAULT): Failed to receive battery data
2015-01-29T23:44:58.567Z,1422575098.567 [BPC1] Communications Fault, FailCount= 1
2015-01-29T23:44:58.567Z,1422575098.567 [BPC1](ERROR): Communications Fault
2015-01-29T23:44:58.576Z,1422575098.576 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:44:58.575Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:44:58.579Z,1422575098.579 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:44:58.577Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:44:58.581Z,1422575098.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:44:58.655Z,1422575098.655 [CBIT](ERROR): Communications Fault in component: BPC1
2015-01-29T23:44:58.985Z,1422575098.985 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:44:59.025Z,1422575099.025 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:44:59.024Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:44:59.028Z,1422575099.028 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:44:59.026Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:44:59.030Z,1422575099.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:44:59.429Z,1422575099.429 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:44:59.446Z,1422575099.446 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:44:59.445Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:44:59.449Z,1422575099.449 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:44:59.447Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:44:59.451Z,1422575099.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:44:59.617Z,1422575099.617 [CommandLine](IMPORTANT): got command failComponent
2015-01-29T23:44:59.617Z,1422575099.617 [CommandLine](IMPORTANT): Failed components:
2015-01-29T23:44:59.618Z,1422575099.618 [CommandLine](IMPORTANT): DropWeight: Hardware Fault
2015-01-29T23:44:59.618Z,1422575099.618 [CommandLine](IMPORTANT): BPC1: Communications Fault
2015-01-29T23:44:59.847Z,1422575099.847 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:44:59.873Z,1422575099.873 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:44:59.872Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:44:59.876Z,1422575099.876 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:44:59.874Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:44:59.878Z,1422575099.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:44:59.922Z,1422575099.922 [CBIT](INFO): Clearing failed state for component BPC1
2015-01-29T23:44:59.922Z,1422575099.922 [BPC1] No Fault, FailCount= 1
2015-01-29T23:45:00.279Z,1422575100.279 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:45:00.349Z,1422575100.349 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:45:00.347Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:45:00.351Z,1422575100.351 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:45:00.350Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:45:00.354Z,1422575100.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:45:00.751Z,1422575100.751 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:45:00.791Z,1422575100.791 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:45:00.789Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:45:00.793Z,1422575100.793 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:45:00.792Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:45:00.795Z,1422575100.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:45:01.184Z,1422575101.184 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:45:01.199Z,1422575101.199 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:45:01.198Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:45:01.202Z,1422575101.202 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:45:01.200Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:45:01.204Z,1422575101.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:45:01.618Z,1422575101.618 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:45:01.633Z,1422575101.633 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:45:01.632Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:45:01.636Z,1422575101.636 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:45:01.634Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:45:01.638Z,1422575101.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:45:02.042Z,1422575102.042 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:45:02.164Z,1422575102.164 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:45:02.147Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:45:02.167Z,1422575102.167 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:45:02.165Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:45:02.169Z,1422575102.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:45:02.583Z,1422575102.583 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:45:02.619Z,1422575102.619 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:45:02.617Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:45:02.626Z,1422575102.626 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:45:02.620Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:45:02.628Z,1422575102.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:45:03.047Z,1422575103.047 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:45:03.117Z,1422575103.117 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:45:03.116Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:45:03.124Z,1422575103.124 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:45:03.123Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:45:03.131Z,1422575103.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:45:03.572Z,1422575103.572 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:45:03.614Z,1422575103.614 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:45:03.612Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:45:03.624Z,1422575103.624 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:45:03.623Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:45:03.635Z,1422575103.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:45:04.054Z,1422575104.054 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:45:04.083Z,1422575104.083 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:45:04.081Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:45:04.090Z,1422575104.090 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:45:04.088Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:45:04.096Z,1422575104.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:45:04.546Z,1422575104.546 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:45:04.597Z,1422575104.597 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:45:04.591Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:45:04.599Z,1422575104.599 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:45:04.598Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:45:04.619Z,1422575104.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:45:05.071Z,1422575105.071 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:45:05.086Z,1422575105.086 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:45:05.084Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:45:05.088Z,1422575105.088 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:45:05.087Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:45:05.091Z,1422575105.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:45:05.491Z,1422575105.491 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:45:05.627Z,1422575105.627 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:45:05.609Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:45:05.631Z,1422575105.631 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:45:05.630Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:45:05.642Z,1422575105.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:45:06.060Z,1422575106.060 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:45:06.077Z,1422575106.077 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:45:06.076Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:45:06.080Z,1422575106.080 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:45:06.078Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:45:06.082Z,1422575106.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:45:06.493Z,1422575106.493 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:45:06.508Z,1422575106.508 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:45:06.506Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:45:06.510Z,1422575106.510 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:45:06.509Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:45:06.513Z,1422575106.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:45:06.913Z,1422575106.913 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:45:06.928Z,1422575106.928 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:45:06.926Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:45:06.930Z,1422575106.930 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:45:06.929Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:45:06.932Z,1422575106.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:45:07.367Z,1422575107.367 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:45:07.393Z,1422575107.393 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:45:07.392Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:45:07.396Z,1422575107.396 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:45:07.394Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:45:07.398Z,1422575107.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:45:07.803Z,1422575107.803 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:45:07.843Z,1422575107.843 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:45:07.842Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:45:07.850Z,1422575107.850 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:45:07.844Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:45:07.852Z,1422575107.852 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:45:07.852Z,1422575107.852 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 1
2015-01-29T23:45:07.852Z,1422575107.852 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2015-01-29T23:45:07.874Z,1422575107.874 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:45:07.875Z,1422575107.875 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 1
2015-01-29T23:45:07.875Z,1422575107.875 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2015-01-29T23:45:07.885Z,1422575107.885 [DeadReckonWithRespectToWater](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:45:07.885Z,1422575107.885 [DeadReckonWithRespectToWater] Software Fault, FailCount= 1
2015-01-29T23:45:07.885Z,1422575107.885 [DeadReckonWithRespectToWater](ERROR): Software Fault
2015-01-29T23:45:07.888Z,1422575107.888 [DeadReckonWithRespectToSeafloor](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:45:07.888Z,1422575107.888 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 1
2015-01-29T23:45:07.888Z,1422575107.888 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2015-01-29T23:45:07.895Z,1422575107.895 [DeadReckonUsingDVLWaterTrack](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:45:07.895Z,1422575107.895 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 1
2015-01-29T23:45:07.895Z,1422575107.895 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2015-01-29T23:45:07.901Z,1422575107.901 [DeadReckonUsingCompactModelForecast](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:45:07.902Z,1422575107.902 [DeadReckonUsingCompactModelForecast] Software Fault, FailCount= 1
2015-01-29T23:45:07.902Z,1422575107.902 [DeadReckonUsingCompactModelForecast](ERROR): Software Fault
2015-01-29T23:45:07.950Z,1422575107.950 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2015-01-29T23:45:07.950Z,1422575107.950 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2015-01-29T23:45:07.950Z,1422575107.950 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToWater
2015-01-29T23:45:07.950Z,1422575107.950 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2015-01-29T23:45:07.951Z,1422575107.951 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2015-01-29T23:45:07.951Z,1422575107.951 [CBIT](ERROR): Software Fault in component: DeadReckonUsingCompactModelForecast
2015-01-29T23:45:08.291Z,1422575108.291 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:45:08.349Z,1422575108.349 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:45:08.348Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:45:08.351Z,1422575108.351 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:45:08.350Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:45:08.407Z,1422575108.407 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2015-01-29T23:45:08.407Z,1422575108.407 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 1
2015-01-29T23:45:08.408Z,1422575108.408 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2015-01-29T23:45:08.408Z,1422575108.408 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 1
2015-01-29T23:45:08.409Z,1422575108.409 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToWater
2015-01-29T23:45:08.409Z,1422575108.409 [DeadReckonWithRespectToWater] No Fault, FailCount= 1
2015-01-29T23:45:08.409Z,1422575108.409 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2015-01-29T23:45:08.409Z,1422575108.409 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 1
2015-01-29T23:45:08.415Z,1422575108.415 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2015-01-29T23:45:08.415Z,1422575108.415 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 1
2015-01-29T23:45:08.416Z,1422575108.416 [CBIT](INFO): Clearing failed state for component DeadReckonUsingCompactModelForecast
2015-01-29T23:45:08.416Z,1422575108.416 [DeadReckonUsingCompactModelForecast] No Fault, FailCount= 1
2015-01-29T23:45:08.768Z,1422575108.768 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:45:08.914Z,1422575108.914 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:45:08.912Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:45:08.928Z,1422575108.928 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:45:08.927Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:45:08.929Z,1422575108.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2015-01-29T23:45:08.930Z,1422575108.930 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2015-01-29T23:45:08.930Z,1422575108.930 [DeadReckonWithRespectToWater](DEBUG): Initializing DeadReckonWithRespectToWater component.
2015-01-29T23:45:08.930Z,1422575108.930 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2015-01-29T23:45:08.951Z,1422575108.951 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2015-01-29T23:45:08.951Z,1422575108.951 [DeadReckonUsingCompactModelForecast](DEBUG): Initializing DeadReckonUsingCompactModelForecast component.
2015-01-29T23:45:09.389Z,1422575109.389 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:45:09.406Z,1422575109.406 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:45:09.404Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:45:09.408Z,1422575109.408 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:45:09.407Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:45:09.410Z,1422575109.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-01-29T23:45:09.411Z,1422575109.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:45:09.826Z,1422575109.826 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:45:09.840Z,1422575109.840 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:45:09.839Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:45:09.843Z,1422575109.843 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:45:09.841Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:45:09.844Z,1422575109.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-01-29T23:45:09.846Z,1422575109.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:45:10.270Z,1422575110.270 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:45:10.337Z,1422575110.337 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:45:10.335Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:45:10.339Z,1422575110.339 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:45:10.338Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:45:10.340Z,1422575110.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 2 cycles since last successful read, accepting data for 5 cycles.
2015-01-29T23:45:10.350Z,1422575110.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:45:10.783Z,1422575110.783 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:45:10.833Z,1422575110.833 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:45:10.832Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:45:10.840Z,1422575110.840 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:45:10.839Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:45:10.862Z,1422575110.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 3 cycles since last successful read, accepting data for 5 cycles.
2015-01-29T23:45:10.863Z,1422575110.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:45:11.276Z,1422575111.276 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:45:11.342Z,1422575111.342 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:45:11.340Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:45:11.352Z,1422575111.352 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:45:11.351Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:45:11.354Z,1422575111.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 4 cycles since last successful read, accepting data for 5 cycles.
2015-01-29T23:45:11.360Z,1422575111.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:45:11.829Z,1422575111.829 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:45:11.896Z,1422575111.896 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:45:11.894Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:45:11.898Z,1422575111.898 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:45:11.897Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:45:11.900Z,1422575111.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 5 cycles since last successful read, accepting data for 5 cycles.
2015-01-29T23:45:11.901Z,1422575111.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:45:12.327Z,1422575112.327 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:45:12.469Z,1422575112.469 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:45:12.459Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:45:12.471Z,1422575112.471 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:45:12.470Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:45:12.482Z,1422575112.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:45:12.907Z,1422575112.907 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:45:12.983Z,1422575112.983 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:45:12.982Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:45:12.986Z,1422575112.986 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:45:12.984Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:45:13.010Z,1422575113.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:45:13.017Z,1422575113.017 [Startup:StartupSatComms:B](INFO): Timed out from 2015-01-29T23:44:12.8Z
2015-01-29T23:45:13.017Z,1422575113.017 [Startup:StartupSatComms:B] Stopped
2015-01-29T23:45:13.017Z,1422575113.017 [Startup:StartupSatComms](INFO): Completed Startup:StartupSatComms
2015-01-29T23:45:13.017Z,1422575113.017 [Startup:StartupSatComms] Stopped
2015-01-29T23:45:13.017Z,1422575113.017 [Startup:StartupSatComms](INFO): Aggregate::uninitialize Startup:StartupSatComms
2015-01-29T23:45:13.018Z,1422575113.018 [Startup](INFO): Completed Startup
2015-01-29T23:45:13.018Z,1422575113.018 [Startup] Stopped
2015-01-29T23:45:13.018Z,1422575113.018 [Startup](INFO): Aggregate::uninitialize Startup
2015-01-29T23:45:13.019Z,1422575113.019 [Startup:A.GoToSurface] Stopped
2015-01-29T23:45:13.019Z,1422575113.019 [Startup:A.GoToSurface](DEBUG): Uninitialize GoToSurfaceComponent.
2015-01-29T23:45:13.419Z,1422575113.419 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:45:13.482Z,1422575113.482 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:45:13.476Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:45:13.485Z,1422575113.485 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:45:13.483Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:45:13.487Z,1422575113.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:45:13.497Z,1422575113.497 [MissionManager](IMPORTANT): Started mission Default
2015-01-29T23:45:13.497Z,1422575113.497 [Default] Running Loop=1
2015-01-29T23:45:13.497Z,1422575113.497 [Default](INFO): Aggregate::initialize Default
2015-01-29T23:45:13.497Z,1422575113.497 [Default:B.GoToSurface] Running Loop=1
2015-01-29T23:45:13.522Z,1422575113.522 [Default:B.GoToSurface](DEBUG): Initialize GoToSurfaceComponent.
2015-01-29T23:45:13.522Z,1422575113.522 [Default:B.GoToSurface](DEBUG): No depth rate setting specified. Using default value of nan m/s.
2015-01-29T23:45:13.523Z,1422575113.523 [Default:B.GoToSurface](DEBUG): No pitch setting specified. Using default value of nan degrees.
2015-01-29T23:45:13.523Z,1422575113.523 [Default:B.GoToSurface](DEBUG): No speed setting specified. Using default value of 0.500000 m/s.
2015-01-29T23:45:13.523Z,1422575113.523 [Default:StartClock] Running Loop=1
2015-01-29T23:45:13.523Z,1422575113.523 [Default:StartClock](INFO): Aggregate::initialize Default:StartClock
2015-01-29T23:45:13.523Z,1422575113.523 [Default:StartClock:A] Running Loop=1
2015-01-29T23:45:13.524Z,1422575113.524 [Default:CheckIn] Running Loop=1
2015-01-29T23:45:13.524Z,1422575113.524 [Default:CheckIn](INFO): Aggregate::initialize Default:CheckIn
2015-01-29T23:45:13.524Z,1422575113.524 [Default:CheckIn:A.SetSpeed] Running Loop=1
2015-01-29T23:45:13.524Z,1422575113.524 [Default:CheckIn:A.SetSpeed](DEBUG): Initialize.
2015-01-29T23:45:13.524Z,1422575113.524 [Default:CheckIn:Read_GPS] Running Loop=1
2015-01-29T23:45:13.525Z,1422575113.525 [Default:CheckIn:Read_GPS](DEBUG): Initialize ReadDataComponent to sense latitude_fix
2015-01-29T23:45:13.531Z,1422575113.531 [Default:CheckIn:A.SetSpeed] Running Loop=1
2015-01-29T23:45:13.573Z,1422575113.573 [Default:StartClock:A] Stopped
2015-01-29T23:45:13.573Z,1422575113.573 [Default:StartClock](INFO): Completed Default:StartClock
2015-01-29T23:45:13.573Z,1422575113.573 [Default:StartClock] Stopped
2015-01-29T23:45:13.573Z,1422575113.573 [Default:StartClock](INFO): Aggregate::uninitialize Default:StartClock
2015-01-29T23:45:13.980Z,1422575113.980 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:45:14.110Z,1422575114.110 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:45:14.108Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:45:14.112Z,1422575114.112 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:45:14.111Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:45:14.114Z,1422575114.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:45:14.149Z,1422575114.149 [Default:WaitAtTheSurface] Running Loop=1
2015-01-29T23:45:14.149Z,1422575114.149 [Default:WaitAtTheSurface](INFO): Aggregate::initialize Default:WaitAtTheSurface
2015-01-29T23:45:14.149Z,1422575114.149 [Default:WaitAtTheSurface:RunApplicationAtLowSpeed.SetSpeed] Running Loop=1
2015-01-29T23:45:14.149Z,1422575114.149 [Default:WaitAtTheSurface:RunApplicationAtLowSpeed.SetSpeed](DEBUG): Initialize.
2015-01-29T23:45:14.537Z,1422575114.537 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:45:14.563Z,1422575114.563 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:45:14.562Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:45:14.570Z,1422575114.570 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:45:14.568Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:45:14.592Z,1422575114.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:45:14.599Z,1422575114.599 [Default:WaitAtTheSurface:RunApplicationAtLowSpeed.SetSpeed] Running Loop=1
2015-01-29T23:45:15.014Z,1422575115.014 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:45:15.073Z,1422575115.073 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:45:15.067Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:45:15.075Z,1422575115.075 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:45:15.074Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:45:15.094Z,1422575115.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:45:15.470Z,1422575115.470 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:45:15.603Z,1422575115.603 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:45:15.601Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:45:15.605Z,1422575115.605 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:45:15.604Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:45:15.608Z,1422575115.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:45:15.995Z,1422575115.995 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:45:16.066Z,1422575116.066 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:45:16.060Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:45:16.069Z,1422575116.069 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:45:16.068Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:45:16.076Z,1422575116.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:45:16.488Z,1422575116.488 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:45:16.504Z,1422575116.504 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:45:16.503Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:45:16.507Z,1422575116.507 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:45:16.505Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:45:16.509Z,1422575116.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:45:16.925Z,1422575116.925 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:45:16.946Z,1422575116.946 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:45:16.945Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:45:16.953Z,1422575116.953 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:45:16.952Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:45:16.980Z,1422575116.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:45:17.374Z,1422575117.374 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:45:17.408Z,1422575117.408 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:45:17.402Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:45:17.411Z,1422575117.411 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:45:17.409Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:45:17.433Z,1422575117.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:45:17.839Z,1422575117.839 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:45:17.923Z,1422575117.923 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:45:17.922Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:45:17.926Z,1422575117.926 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:45:17.924Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:45:17.928Z,1422575117.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:45:18.335Z,1422575118.335 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:45:18.436Z,1422575118.436 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:45:18.435Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:45:18.438Z,1422575118.438 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:45:18.437Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:45:18.441Z,1422575118.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:45:18.837Z,1422575118.837 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:45:18.950Z,1422575118.950 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:45:18.948Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:45:18.960Z,1422575118.960 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:45:18.959Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:45:18.971Z,1422575118.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:45:19.381Z,1422575119.381 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:45:19.428Z,1422575119.428 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:45:19.422Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:45:19.431Z,1422575119.431 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:45:19.429Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:45:19.437Z,1422575119.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:45:19.854Z,1422575119.854 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:45:19.888Z,1422575119.888 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:45:19.882Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:45:19.890Z,1422575119.890 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:45:19.889Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:45:19.897Z,1422575119.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:45:20.330Z,1422575120.330 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:45:20.387Z,1422575120.387 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:45:20.386Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:45:20.390Z,1422575120.390 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:45:20.388Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:45:20.394Z,1422575120.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:45:20.835Z,1422575120.835 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:45:20.975Z,1422575120.975 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:45:20.973Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:45:20.977Z,1422575120.977 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:45:20.976Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:45:20.995Z,1422575120.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:45:21.428Z,1422575121.428 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:45:21.718Z,1422575121.718 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:45:21.709Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:45:21.721Z,1422575121.721 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:45:21.720Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:45:21.732Z,1422575121.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:45:22.165Z,1422575122.165 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:45:22.295Z,1422575122.295 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:45:22.293Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:45:22.297Z,1422575122.297 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:45:22.296Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:45:22.327Z,1422575122.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:45:22.742Z,1422575122.742 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:45:22.780Z,1422575122.780 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:45:22.778Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:45:22.787Z,1422575122.787 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:45:22.785Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:45:22.793Z,1422575122.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:45:23.198Z,1422575123.198 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:45:23.199Z,1422575123.199 [DVL_micro](FAULT): DVL failed to acquire valid data within timeout.
2015-01-29T23:45:23.199Z,1422575123.199 [DVL_micro] Data Fault, FailCount= 1
2015-01-29T23:45:23.199Z,1422575123.199 [DVL_micro](ERROR): Data Fault
2015-01-29T23:45:23.270Z,1422575123.270 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:45:23.260Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:45:23.272Z,1422575123.272 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:45:23.271Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:45:23.279Z,1422575123.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:45:23.343Z,1422575123.343 [CBIT](ERROR): Data Fault in component: DVL_micro
2015-01-29T23:45:23.746Z,1422575123.746 [DVL_micro](INFO): uninitialize:Powering down
2015-01-29T23:45:23.781Z,1422575123.781 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:45:23.779Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:45:23.783Z,1422575123.783 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:45:23.782Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:45:23.787Z,1422575123.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:45:24.212Z,1422575124.212 [DVL_micro](FAULT): LCB fault:  Software Overcurrent.
2015-01-29T23:45:24.212Z,1422575124.212 [DVL_micro] Hardware Fault, FailCount= 1
2015-01-29T23:45:24.212Z,1422575124.212 [DVL_micro](ERROR): Hardware Fault
2015-01-29T23:45:24.294Z,1422575124.294 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:45:24.293Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:45:24.313Z,1422575124.313 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:45:24.311Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:45:24.323Z,1422575124.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:45:24.747Z,1422575124.747 [DVL_micro](INFO): Initializing
2015-01-29T23:45:24.846Z,1422575124.846 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:45:24.845Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:45:24.850Z,1422575124.850 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:45:24.849Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:45:24.877Z,1422575124.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:45:24.947Z,1422575124.947 [CBIT](INFO): Clearing failed state for component DVL_micro
2015-01-29T23:45:24.947Z,1422575124.947 [DVL_micro] No Fault, FailCount= 1
2015-01-29T23:45:25.345Z,1422575125.345 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:45:25.339Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:45:25.347Z,1422575125.347 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:45:25.346Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:45:25.369Z,1422575125.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:45:25.792Z,1422575125.792 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:45:25.790Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:45:25.794Z,1422575125.794 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:45:25.793Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:45:25.797Z,1422575125.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:45:26.329Z,1422575126.329 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:45:26.327Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:45:26.335Z,1422575126.335 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:45:26.334Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:45:26.338Z,1422575126.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:45:26.795Z,1422575126.795 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:45:26.789Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:45:26.798Z,1422575126.798 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:45:26.796Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:45:26.805Z,1422575126.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:45:27.387Z,1422575127.387 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:45:27.386Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:45:27.398Z,1422575127.398 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:45:27.396Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:45:27.400Z,1422575127.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:45:27.997Z,1422575127.997 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:45:27.983Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:45:27.999Z,1422575127.999 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:45:27.998Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:45:28.013Z,1422575128.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:45:28.476Z,1422575128.476 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:45:28.475Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:45:28.483Z,1422575128.483 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:45:28.482Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:45:28.490Z,1422575128.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:45:28.972Z,1422575128.972 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:45:28.970Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:45:28.978Z,1422575128.978 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:45:28.973Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:45:28.981Z,1422575128.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:45:29.424Z,1422575129.424 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:45:29.568Z,1422575129.568 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:45:29.567Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:45:29.571Z,1422575129.571 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:45:29.569Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:45:29.573Z,1422575129.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:45:29.985Z,1422575129.985 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:45:30.032Z,1422575130.032 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:45:30.026Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:45:30.034Z,1422575130.034 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:45:30.033Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:45:30.041Z,1422575130.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:45:30.044Z,1422575130.044 [CommandLine](IMPORTANT): got command get AHRS_sp3003D.platform_orientation
2015-01-29T23:45:30.045Z,1422575130.045 [CommandLine](IMPORTANT): AHRS_sp3003D.platform_orientation 0.310149 rad
2015-01-29T23:45:30.446Z,1422575130.446 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:45:30.529Z,1422575130.529 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:45:30.523Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:45:30.531Z,1422575130.531 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:45:30.530Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:45:30.570Z,1422575130.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:45:30.995Z,1422575130.995 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:45:31.133Z,1422575131.133 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:45:31.131Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:45:31.136Z,1422575131.136 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:45:31.135Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:45:31.138Z,1422575131.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:45:31.564Z,1422575131.564 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:45:31.613Z,1422575131.613 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:45:31.612Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:45:31.636Z,1422575131.636 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:45:31.635Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:45:31.647Z,1422575131.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:45:32.072Z,1422575132.072 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:45:32.097Z,1422575132.097 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:45:32.096Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:45:32.100Z,1422575132.100 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:45:32.098Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:45:32.104Z,1422575132.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:45:32.562Z,1422575132.562 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:45:32.607Z,1422575132.607 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:45:32.605Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:45:32.629Z,1422575132.629 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:45:32.628Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:45:32.640Z,1422575132.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:45:33.063Z,1422575133.063 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:45:33.123Z,1422575133.123 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:45:33.122Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:45:33.134Z,1422575133.134 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:45:33.133Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:45:33.153Z,1422575133.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:45:33.585Z,1422575133.585 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:45:33.632Z,1422575133.632 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:45:33.631Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:45:33.638Z,1422575133.638 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:45:33.637Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:45:33.641Z,1422575133.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:45:34.068Z,1422575134.068 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:45:34.083Z,1422575134.083 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:45:34.081Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:45:34.090Z,1422575134.090 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:45:34.084Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:45:34.100Z,1422575134.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:45:34.504Z,1422575134.504 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:45:34.591Z,1422575134.591 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:45:34.590Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:45:34.594Z,1422575134.594 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:45:34.592Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:45:34.606Z,1422575134.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:45:34.988Z,1422575134.988 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:45:35.004Z,1422575135.004 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:45:35.003Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:45:35.007Z,1422575135.007 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:45:35.005Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:45:35.009Z,1422575135.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:45:35.393Z,1422575135.393 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:45:35.408Z,1422575135.408 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:45:35.406Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:45:35.410Z,1422575135.410 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:45:35.409Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:45:35.413Z,1422575135.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:45:35.436Z,1422575135.436 [CommandLine](IMPORTANT): got command get AHRS_sp3003D.platform_orientation degree
2015-01-29T23:45:35.437Z,1422575135.437 [CommandLine](IMPORTANT): AHRS_sp3003D.platform_orientation 17.770247 arcdeg
2015-01-29T23:45:35.814Z,1422575135.814 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:45:35.841Z,1422575135.841 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:45:35.840Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:45:35.843Z,1422575135.843 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:45:35.842Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:45:35.846Z,1422575135.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:45:36.229Z,1422575136.229 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:45:36.244Z,1422575136.244 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:45:36.243Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:45:36.247Z,1422575136.247 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:45:36.245Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:45:36.249Z,1422575136.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:45:36.647Z,1422575136.647 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:45:36.673Z,1422575136.673 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:45:36.671Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:45:36.699Z,1422575136.699 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:45:36.693Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:45:36.701Z,1422575136.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:45:37.112Z,1422575137.112 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:45:37.154Z,1422575137.154 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:45:37.152Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:45:37.160Z,1422575137.160 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:45:37.159Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:45:37.167Z,1422575137.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:45:37.561Z,1422575137.561 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:45:37.589Z,1422575137.589 [CommandLine](IMPORTANT): got command get AHRS_sp3003D.platform_orientation degree
2015-01-29T23:45:37.589Z,1422575137.589 [CommandLine](IMPORTANT): AHRS_sp3003D.platform_orientation 17.770247 arcdeg
2015-01-29T23:45:37.607Z,1422575137.607 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:45:37.606Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:45:37.609Z,1422575137.609 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:45:37.608Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:45:37.613Z,1422575137.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:45:38.009Z,1422575138.009 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:45:38.027Z,1422575138.027 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:45:38.026Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:45:38.029Z,1422575138.029 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:45:38.028Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:45:38.032Z,1422575138.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:45:38.429Z,1422575138.429 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:45:38.457Z,1422575138.457 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:45:38.456Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:45:38.459Z,1422575138.459 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:45:38.458Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:45:38.462Z,1422575138.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:45:38.859Z,1422575138.859 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:45:38.908Z,1422575138.908 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:45:38.907Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:45:38.911Z,1422575138.911 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:45:38.909Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:45:38.913Z,1422575138.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:45:39.296Z,1422575139.296 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:45:39.311Z,1422575139.311 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:45:39.310Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:45:39.313Z,1422575139.313 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:45:39.312Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:45:39.316Z,1422575139.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:45:39.712Z,1422575139.712 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:45:39.763Z,1422575139.763 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:45:39.761Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:45:39.765Z,1422575139.765 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:45:39.764Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:45:39.768Z,1422575139.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:45:40.152Z,1422575140.152 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:45:40.167Z,1422575140.167 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:45:40.166Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:45:40.169Z,1422575140.169 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:45:40.168Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:45:40.172Z,1422575140.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:45:40.565Z,1422575140.565 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:45:40.614Z,1422575140.614 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:45:40.612Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:45:40.620Z,1422575140.620 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:45:40.615Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:45:40.622Z,1422575140.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:45:41.010Z,1422575141.010 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:45:41.031Z,1422575141.031 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:45:41.030Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:45:41.034Z,1422575141.034 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:45:41.032Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:45:41.036Z,1422575141.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:45:41.431Z,1422575141.431 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:45:41.446Z,1422575141.446 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:45:41.444Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:45:41.448Z,1422575141.448 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:45:41.447Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:45:41.466Z,1422575141.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:45:41.847Z,1422575141.847 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:45:41.873Z,1422575141.873 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:45:41.871Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:45:41.875Z,1422575141.875 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:45:41.874Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:45:41.877Z,1422575141.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:45:42.280Z,1422575142.280 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:45:42.295Z,1422575142.295 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:45:42.293Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:45:42.297Z,1422575142.297 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:45:42.296Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:45:42.300Z,1422575142.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:45:42.710Z,1422575142.710 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:45:42.725Z,1422575142.725 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:45:42.724Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:45:42.728Z,1422575142.728 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:45:42.726Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:45:42.730Z,1422575142.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:45:43.125Z,1422575143.125 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:45:43.211Z,1422575143.211 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:45:43.210Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:45:43.217Z,1422575143.217 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:45:43.216Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:45:43.224Z,1422575143.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:45:43.619Z,1422575143.619 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:45:43.651Z,1422575143.651 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:45:43.650Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:45:43.654Z,1422575143.654 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:45:43.652Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:45:43.656Z,1422575143.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:45:44.067Z,1422575144.067 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:45:44.145Z,1422575144.145 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:45:44.143Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:45:44.147Z,1422575144.147 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:45:44.146Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:45:44.150Z,1422575144.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:45:44.555Z,1422575144.555 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:45:44.578Z,1422575144.578 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:45:44.577Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:45:44.581Z,1422575144.581 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:45:44.579Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:45:44.583Z,1422575144.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:45:44.988Z,1422575144.988 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:45:45.055Z,1422575145.055 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:45:45.053Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:45:45.057Z,1422575145.057 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:45:45.056Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:45:45.059Z,1422575145.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:45:45.461Z,1422575145.461 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:45:45.524Z,1422575145.524 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:45:45.522Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:45:45.526Z,1422575145.526 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:45:45.525Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:45:45.528Z,1422575145.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:45:45.923Z,1422575145.923 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:45:45.959Z,1422575145.959 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:45:45.958Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:45:45.978Z,1422575145.978 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:45:45.977Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:45:45.984Z,1422575145.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:45:46.375Z,1422575146.375 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:45:46.434Z,1422575146.434 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:45:46.432Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:45:46.439Z,1422575146.439 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:45:46.437Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:45:46.453Z,1422575146.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:45:46.869Z,1422575146.869 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:45:46.956Z,1422575146.956 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:45:46.955Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:45:46.967Z,1422575146.967 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:45:46.957Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:45:46.969Z,1422575146.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:45:47.373Z,1422575147.373 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:45:47.399Z,1422575147.399 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:45:47.397Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:45:47.401Z,1422575147.401 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:45:47.400Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:45:47.403Z,1422575147.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:45:47.805Z,1422575147.805 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:45:47.820Z,1422575147.820 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:45:47.818Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:45:47.822Z,1422575147.822 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:45:47.821Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:45:47.840Z,1422575147.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:45:47.872Z,1422575147.872 [CommandLine](IMPORTANT): got command get AHRS_sp3003D.platform_orientation degree
2015-01-29T23:45:47.872Z,1422575147.872 [CommandLine](IMPORTANT): AHRS_sp3003D.platform_orientation 17.770247 arcdeg
2015-01-29T23:45:48.238Z,1422575148.238 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:45:48.252Z,1422575148.252 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:45:48.251Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:45:48.255Z,1422575148.255 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:45:48.253Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:45:48.257Z,1422575148.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:45:48.658Z,1422575148.658 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:45:48.673Z,1422575148.673 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:45:48.671Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:45:48.675Z,1422575148.675 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:45:48.674Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:45:48.678Z,1422575148.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:45:49.079Z,1422575149.079 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:45:49.113Z,1422575149.113 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:45:49.111Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:45:49.115Z,1422575149.115 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:45:49.114Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:45:49.117Z,1422575149.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:45:49.508Z,1422575149.508 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:45:49.522Z,1422575149.522 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:45:49.520Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:45:49.524Z,1422575149.524 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:45:49.523Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:45:49.527Z,1422575149.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:45:49.920Z,1422575149.920 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:45:49.993Z,1422575149.993 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:45:49.992Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:45:49.996Z,1422575149.996 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:45:49.995Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:45:49.998Z,1422575149.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:45:50.393Z,1422575150.393 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:45:50.410Z,1422575150.410 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:45:50.409Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:45:50.413Z,1422575150.413 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:45:50.412Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:45:50.415Z,1422575150.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:45:50.813Z,1422575150.813 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:45:50.828Z,1422575150.828 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:45:50.826Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:45:50.830Z,1422575150.830 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:45:50.829Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:45:50.832Z,1422575150.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:45:51.234Z,1422575151.234 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:45:51.258Z,1422575151.258 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:45:51.256Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:45:51.260Z,1422575151.260 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:45:51.259Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:45:51.262Z,1422575151.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:45:51.663Z,1422575151.663 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:45:51.678Z,1422575151.678 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:45:51.676Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:45:51.680Z,1422575151.680 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:45:51.678Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:45:51.682Z,1422575151.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:45:52.083Z,1422575152.083 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:45:52.110Z,1422575152.110 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:45:52.109Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:45:52.113Z,1422575152.113 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:45:52.111Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:45:52.115Z,1422575152.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:45:52.505Z,1422575152.505 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:45:52.521Z,1422575152.521 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:45:52.520Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:45:52.524Z,1422575152.524 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:45:52.522Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:45:52.526Z,1422575152.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:45:52.922Z,1422575152.922 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:45:52.961Z,1422575152.961 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:45:52.959Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:45:52.967Z,1422575152.967 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:45:52.962Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:45:52.969Z,1422575152.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:45:53.357Z,1422575153.357 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:45:53.390Z,1422575153.390 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:45:53.388Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:45:53.392Z,1422575153.392 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:45:53.391Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:45:53.394Z,1422575153.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:45:53.808Z,1422575153.808 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:45:53.826Z,1422575153.826 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:45:53.824Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:45:53.828Z,1422575153.828 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:45:53.827Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:45:53.830Z,1422575153.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:45:54.231Z,1422575154.231 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:45:54.275Z,1422575154.275 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:45:54.273Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:45:54.277Z,1422575154.277 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:45:54.276Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:45:54.279Z,1422575154.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:45:54.671Z,1422575154.671 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:45:54.686Z,1422575154.686 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:45:54.684Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:45:54.688Z,1422575154.688 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:45:54.687Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:45:54.691Z,1422575154.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:45:55.088Z,1422575155.088 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:45:55.135Z,1422575155.135 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:45:55.134Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:45:55.137Z,1422575155.137 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:45:55.136Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:45:55.140Z,1422575155.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:45:55.541Z,1422575155.541 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:45:55.556Z,1422575155.556 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:45:55.554Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:45:55.558Z,1422575155.558 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:45:55.557Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:45:55.560Z,1422575155.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:45:55.961Z,1422575155.961 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:45:55.987Z,1422575155.987 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:45:55.986Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:45:55.990Z,1422575155.990 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:45:55.988Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:45:55.992Z,1422575155.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:45:56.386Z,1422575156.386 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:45:56.454Z,1422575156.454 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:45:56.416Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:45:56.456Z,1422575156.456 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:45:56.455Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:45:56.458Z,1422575156.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:45:56.839Z,1422575156.839 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:45:56.856Z,1422575156.856 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:45:56.855Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:45:56.858Z,1422575156.858 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:45:56.857Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:45:56.861Z,1422575156.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:45:57.263Z,1422575157.263 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:45:57.317Z,1422575157.317 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:45:57.316Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:45:57.336Z,1422575157.336 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:45:57.334Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:45:57.342Z,1422575157.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:45:57.732Z,1422575157.732 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:45:57.746Z,1422575157.746 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:45:57.745Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:45:57.748Z,1422575157.748 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:45:57.747Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:45:57.751Z,1422575157.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:45:58.153Z,1422575158.153 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:45:58.168Z,1422575158.168 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:45:58.167Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:45:58.171Z,1422575158.171 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:45:58.169Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:45:58.173Z,1422575158.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:45:58.573Z,1422575158.573 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:45:58.600Z,1422575158.600 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:45:58.598Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:45:58.602Z,1422575158.602 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:45:58.601Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:45:58.604Z,1422575158.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:45:59.006Z,1422575159.006 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:45:59.020Z,1422575159.020 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:45:59.019Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:45:59.022Z,1422575159.022 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:45:59.021Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:45:59.025Z,1422575159.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:45:59.440Z,1422575159.440 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:45:59.516Z,1422575159.516 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:45:59.512Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:45:59.519Z,1422575159.519 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:45:59.517Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:45:59.521Z,1422575159.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:45:59.915Z,1422575159.915 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:45:59.932Z,1422575159.932 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:45:59.931Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:45:59.955Z,1422575159.955 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:45:59.933Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:45:59.957Z,1422575159.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:46:00.341Z,1422575160.341 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:46:00.368Z,1422575160.368 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:46:00.366Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:46:00.370Z,1422575160.370 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:46:00.369Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:46:00.372Z,1422575160.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:46:00.777Z,1422575160.777 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:46:00.795Z,1422575160.795 [BPC1](FAULT): Failed to receive battery data
2015-01-29T23:46:00.796Z,1422575160.796 [BPC1] Communications Fault, FailCount= 1
2015-01-29T23:46:00.796Z,1422575160.796 [BPC1](ERROR): Communications Fault
2015-01-29T23:46:00.805Z,1422575160.805 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:46:00.804Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:46:00.808Z,1422575160.808 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:46:00.806Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:46:00.810Z,1422575160.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:46:00.852Z,1422575160.852 [CBIT](ERROR): Communications Fault in component: BPC1
2015-01-29T23:46:01.205Z,1422575161.205 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:46:01.220Z,1422575161.220 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:46:01.219Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:46:01.223Z,1422575161.223 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:46:01.221Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:46:01.225Z,1422575161.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:46:01.614Z,1422575161.614 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:46:01.628Z,1422575161.628 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:46:01.627Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:46:01.630Z,1422575161.630 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:46:01.629Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:46:01.633Z,1422575161.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:46:02.039Z,1422575162.039 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:46:02.066Z,1422575162.066 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:46:02.064Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:46:02.068Z,1422575162.068 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:46:02.067Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:46:02.070Z,1422575162.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:46:02.110Z,1422575162.110 [CBIT](INFO): Clearing failed state for component BPC1
2015-01-29T23:46:02.110Z,1422575162.110 [BPC1] No Fault, FailCount= 1
2015-01-29T23:46:02.467Z,1422575162.467 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:46:02.581Z,1422575162.581 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:46:02.580Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:46:02.584Z,1422575162.584 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:46:02.583Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:46:02.586Z,1422575162.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:46:02.976Z,1422575162.976 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:46:02.993Z,1422575162.993 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:46:02.991Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:46:02.995Z,1422575162.995 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:46:02.994Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:46:02.997Z,1422575162.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:46:03.389Z,1422575163.389 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:46:03.447Z,1422575163.447 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:46:03.445Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:46:03.449Z,1422575163.449 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:46:03.448Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:46:03.452Z,1422575163.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:46:03.849Z,1422575163.849 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:46:03.895Z,1422575163.895 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:46:03.894Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:46:03.897Z,1422575163.897 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:46:03.896Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:46:03.900Z,1422575163.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:46:04.306Z,1422575164.306 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:46:04.348Z,1422575164.348 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:46:04.347Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:46:04.355Z,1422575164.355 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:46:04.353Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:46:04.361Z,1422575164.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:46:04.759Z,1422575164.759 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:46:04.808Z,1422575164.808 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:46:04.807Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:46:04.815Z,1422575164.815 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:46:04.813Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:46:04.817Z,1422575164.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:46:05.236Z,1422575165.236 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:46:05.251Z,1422575165.251 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:46:05.249Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:46:05.253Z,1422575165.253 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:46:05.252Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:46:05.256Z,1422575165.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:46:05.527Z,1422575165.527 [CommandLine](IMPORTANT): got command get AHRS_sp3003D.platform_orientation degree
2015-01-29T23:46:05.528Z,1422575165.528 [CommandLine](IMPORTANT): AHRS_sp3003D.platform_orientation 11.266353 arcdeg
2015-01-29T23:46:05.653Z,1422575165.653 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:46:05.714Z,1422575165.714 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:46:05.712Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:46:05.716Z,1422575165.716 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:46:05.715Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:46:05.718Z,1422575165.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:46:06.102Z,1422575166.102 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:46:06.119Z,1422575166.119 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:46:06.117Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:46:06.121Z,1422575166.121 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:46:06.120Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:46:06.124Z,1422575166.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:46:06.517Z,1422575166.517 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:46:06.532Z,1422575166.532 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:46:06.531Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:46:06.535Z,1422575166.535 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:46:06.533Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:46:06.537Z,1422575166.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:46:06.931Z,1422575166.931 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:46:06.961Z,1422575166.961 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:46:06.944Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:46:06.964Z,1422575166.964 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:46:06.962Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:46:06.970Z,1422575166.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:46:07.355Z,1422575167.355 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:46:07.371Z,1422575167.371 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:46:07.369Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:46:07.373Z,1422575167.373 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:46:07.372Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:46:07.375Z,1422575167.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:46:07.775Z,1422575167.775 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:46:07.790Z,1422575167.790 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:46:07.788Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:46:07.792Z,1422575167.792 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:46:07.791Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:46:07.795Z,1422575167.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:46:08.196Z,1422575168.196 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:46:08.223Z,1422575168.223 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:46:08.221Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:46:08.225Z,1422575168.225 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:46:08.224Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:46:08.228Z,1422575168.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:46:08.637Z,1422575168.637 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:46:08.692Z,1422575168.692 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:46:08.691Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:46:08.694Z,1422575168.694 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:46:08.693Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:46:08.697Z,1422575168.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:46:09.097Z,1422575169.097 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:46:09.139Z,1422575169.139 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:46:09.137Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:46:09.141Z,1422575169.141 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:46:09.139Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:46:09.143Z,1422575169.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:46:09.539Z,1422575169.539 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:46:09.588Z,1422575169.588 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:46:09.587Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:46:09.591Z,1422575169.591 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:46:09.589Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:46:09.594Z,1422575169.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:46:09.987Z,1422575169.987 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:46:10.036Z,1422575170.036 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:46:10.035Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:46:10.043Z,1422575170.043 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:46:10.041Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:46:10.045Z,1422575170.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:46:10.444Z,1422575170.444 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:46:10.494Z,1422575170.494 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:46:10.492Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:46:10.496Z,1422575170.496 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:46:10.495Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:46:10.499Z,1422575170.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:46:10.896Z,1422575170.896 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:46:10.959Z,1422575170.959 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:46:10.958Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:46:10.962Z,1422575170.962 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:46:10.960Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:46:10.964Z,1422575170.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:46:11.374Z,1422575171.374 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:46:11.389Z,1422575171.389 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:46:11.387Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:46:11.391Z,1422575171.391 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:46:11.390Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:46:11.393Z,1422575171.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:46:11.790Z,1422575171.790 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:46:11.804Z,1422575171.804 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:46:11.803Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:46:11.807Z,1422575171.807 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:46:11.805Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:46:11.809Z,1422575171.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:46:12.203Z,1422575172.203 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:46:12.278Z,1422575172.278 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:46:12.276Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:46:12.281Z,1422575172.281 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:46:12.279Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:46:12.283Z,1422575172.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:46:12.676Z,1422575172.676 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:46:12.694Z,1422575172.694 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:46:12.692Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:46:12.696Z,1422575172.696 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:46:12.695Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:46:12.698Z,1422575172.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:46:13.100Z,1422575173.100 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:46:13.115Z,1422575173.115 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:46:13.113Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:46:13.117Z,1422575173.117 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:46:13.116Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:46:13.120Z,1422575173.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:46:13.538Z,1422575173.538 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:46:13.553Z,1422575173.553 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:46:13.552Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:46:13.556Z,1422575173.556 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:46:13.554Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:46:13.558Z,1422575173.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:46:13.957Z,1422575173.957 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:46:13.972Z,1422575173.972 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:46:13.970Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:46:13.974Z,1422575173.974 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:46:13.973Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:46:13.977Z,1422575173.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:46:14.378Z,1422575174.378 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:46:14.401Z,1422575174.401 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:46:14.399Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:46:14.403Z,1422575174.403 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:46:14.402Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:46:14.405Z,1422575174.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:46:14.803Z,1422575174.803 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:46:14.817Z,1422575174.817 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:46:14.815Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:46:14.819Z,1422575174.819 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:46:14.818Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:46:14.821Z,1422575174.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:46:15.232Z,1422575175.232 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:46:15.345Z,1422575175.345 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:46:15.343Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:46:15.347Z,1422575175.347 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:46:15.346Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:46:15.349Z,1422575175.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:46:15.745Z,1422575175.745 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:46:15.777Z,1422575175.777 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:46:15.776Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:46:15.780Z,1422575175.780 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:46:15.778Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:46:15.782Z,1422575175.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:46:16.198Z,1422575176.198 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:46:16.230Z,1422575176.230 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:46:16.229Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:46:16.232Z,1422575176.232 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:46:16.231Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:46:16.235Z,1422575176.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:46:16.633Z,1422575176.633 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:46:16.648Z,1422575176.648 [CommandLine](IMPORTANT): got command get AHRS_sp3003D.platform_orientation degree
2015-01-29T23:46:16.649Z,1422575176.649 [CommandLine](IMPORTANT): AHRS_sp3003D.platform_orientation 11.266353 arcdeg
2015-01-29T23:46:16.668Z,1422575176.668 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:46:16.667Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:46:16.670Z,1422575176.670 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:46:16.669Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:46:16.673Z,1422575176.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:46:17.058Z,1422575177.058 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:46:17.073Z,1422575177.073 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:46:17.071Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:46:17.075Z,1422575177.075 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:46:17.074Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:46:17.078Z,1422575177.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:46:17.467Z,1422575177.467 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:46:17.481Z,1422575177.481 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:46:17.480Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:46:17.484Z,1422575177.484 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:46:17.482Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:46:17.487Z,1422575177.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:46:17.891Z,1422575177.891 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:46:17.919Z,1422575177.919 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:46:17.918Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:46:17.922Z,1422575177.922 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:46:17.920Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:46:17.924Z,1422575177.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:46:18.308Z,1422575178.308 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:46:18.340Z,1422575178.340 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:46:18.339Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:46:18.343Z,1422575178.343 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:46:18.341Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:46:18.345Z,1422575178.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:46:18.749Z,1422575178.749 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:46:18.774Z,1422575178.774 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:46:18.772Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:46:18.776Z,1422575178.776 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:46:18.775Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:46:18.778Z,1422575178.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:46:19.177Z,1422575179.177 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:46:19.192Z,1422575179.192 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:46:19.191Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:46:19.195Z,1422575179.195 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:46:19.193Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:46:19.197Z,1422575179.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:46:19.602Z,1422575179.602 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:46:19.627Z,1422575179.627 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:46:19.626Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:46:19.630Z,1422575179.630 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:46:19.629Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:46:19.632Z,1422575179.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:46:20.027Z,1422575180.027 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:46:20.041Z,1422575180.041 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:46:20.040Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:46:20.043Z,1422575180.043 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:46:20.042Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:46:20.046Z,1422575180.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:46:20.451Z,1422575180.451 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:46:20.479Z,1422575180.479 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:46:20.478Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:46:20.482Z,1422575180.482 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:46:20.480Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:46:20.484Z,1422575180.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:46:20.880Z,1422575180.880 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:46:20.895Z,1422575180.895 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:46:20.893Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:46:20.897Z,1422575180.897 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:46:20.896Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:46:20.900Z,1422575180.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:46:21.305Z,1422575181.305 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:46:21.386Z,1422575181.386 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:46:21.385Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:46:21.393Z,1422575181.393 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:46:21.391Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:46:21.395Z,1422575181.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:46:21.793Z,1422575181.793 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:46:21.810Z,1422575181.810 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:46:21.809Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:46:21.813Z,1422575181.813 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:46:21.811Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:46:21.815Z,1422575181.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:46:22.231Z,1422575182.231 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:46:22.288Z,1422575182.288 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:46:22.287Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:46:22.295Z,1422575182.295 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:46:22.293Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:46:22.301Z,1422575182.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:46:22.691Z,1422575182.691 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:46:22.706Z,1422575182.706 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:46:22.704Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:46:22.708Z,1422575182.708 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:46:22.707Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:46:22.711Z,1422575182.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:46:23.103Z,1422575183.103 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:46:23.119Z,1422575183.119 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:46:23.117Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:46:23.121Z,1422575183.121 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:46:23.120Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:46:23.124Z,1422575183.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:46:23.524Z,1422575183.524 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:46:23.552Z,1422575183.552 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:46:23.550Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:46:23.554Z,1422575183.554 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:46:23.553Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:46:23.556Z,1422575183.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:46:23.949Z,1422575183.949 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:46:23.963Z,1422575183.963 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:46:23.962Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:46:23.965Z,1422575183.965 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:46:23.964Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:46:23.968Z,1422575183.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:46:24.361Z,1422575184.361 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:46:24.418Z,1422575184.418 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:46:24.416Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:46:24.424Z,1422575184.424 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:46:24.419Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:46:24.426Z,1422575184.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:46:24.813Z,1422575184.813 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:46:24.830Z,1422575184.830 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:46:24.828Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:46:24.832Z,1422575184.832 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:46:24.831Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:46:24.834Z,1422575184.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:46:25.252Z,1422575185.252 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:46:25.266Z,1422575185.266 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:46:25.265Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:46:25.268Z,1422575185.268 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:46:25.267Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:46:25.272Z,1422575185.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:46:25.663Z,1422575185.663 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:46:25.691Z,1422575185.691 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:46:25.689Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:46:25.693Z,1422575185.693 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:46:25.692Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:46:25.718Z,1422575185.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:46:26.103Z,1422575186.103 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:46:26.110Z,1422575186.110 [BPC1](FAULT): Failed to receive battery data
2015-01-29T23:46:26.110Z,1422575186.110 [BPC1] Communications Fault, FailCount= 1
2015-01-29T23:46:26.110Z,1422575186.110 [BPC1](ERROR): Communications Fault
2015-01-29T23:46:26.120Z,1422575186.120 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:46:26.118Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:46:26.122Z,1422575186.122 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:46:26.121Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:46:26.124Z,1422575186.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:46:26.167Z,1422575186.167 [CBIT](ERROR): Communications Fault in component: BPC1
2015-01-29T23:46:26.529Z,1422575186.529 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:46:26.574Z,1422575186.574 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:46:26.573Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:46:26.577Z,1422575186.577 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:46:26.576Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:46:26.580Z,1422575186.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:46:26.973Z,1422575186.973 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:46:26.988Z,1422575186.988 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:46:26.987Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:46:26.991Z,1422575186.991 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:46:26.989Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:46:26.994Z,1422575186.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:46:27.394Z,1422575187.394 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:46:27.435Z,1422575187.435 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:46:27.433Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:46:27.437Z,1422575187.437 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:46:27.436Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:46:27.439Z,1422575187.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:46:27.501Z,1422575187.501 [CBIT](INFO): Clearing failed state for component BPC1
2015-01-29T23:46:27.501Z,1422575187.501 [BPC1] No Fault, FailCount= 1
2015-01-29T23:46:27.835Z,1422575187.835 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:46:27.922Z,1422575187.922 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:46:27.920Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:46:27.924Z,1422575187.924 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:46:27.923Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:46:27.927Z,1422575187.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:46:28.320Z,1422575188.320 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:46:28.379Z,1422575188.379 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:46:28.377Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:46:28.381Z,1422575188.381 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:46:28.380Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:46:28.383Z,1422575188.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:46:28.776Z,1422575188.776 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:46:28.791Z,1422575188.791 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:46:28.790Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:46:28.794Z,1422575188.794 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:46:28.792Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:46:28.796Z,1422575188.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:46:29.197Z,1422575189.197 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:46:29.211Z,1422575189.211 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:46:29.210Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:46:29.214Z,1422575189.214 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:46:29.212Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:46:29.216Z,1422575189.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:46:29.622Z,1422575189.622 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:46:29.637Z,1422575189.637 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:46:29.635Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:46:29.639Z,1422575189.639 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:46:29.638Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:46:29.641Z,1422575189.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:46:30.046Z,1422575190.046 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:46:30.061Z,1422575190.061 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:46:30.059Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:46:30.063Z,1422575190.063 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:46:30.062Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:46:30.066Z,1422575190.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:46:30.463Z,1422575190.463 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:46:30.504Z,1422575190.504 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:46:30.502Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:46:30.507Z,1422575190.507 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:46:30.505Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:46:30.509Z,1422575190.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:46:30.895Z,1422575190.895 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:46:30.955Z,1422575190.955 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:46:30.954Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:46:30.957Z,1422575190.957 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:46:30.956Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:46:30.964Z,1422575190.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:46:31.368Z,1422575191.368 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:46:31.398Z,1422575191.398 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:46:31.396Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:46:31.408Z,1422575191.408 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:46:31.407Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:46:31.410Z,1422575191.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:46:31.834Z,1422575191.834 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:46:31.878Z,1422575191.878 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:46:31.877Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:46:31.897Z,1422575191.897 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:46:31.896Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:46:31.903Z,1422575191.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:46:32.298Z,1422575192.298 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:46:32.313Z,1422575192.313 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:46:32.312Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:46:32.316Z,1422575192.316 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:46:32.314Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:46:32.318Z,1422575192.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:46:32.357Z,1422575192.357 [CommandLine](IMPORTANT): got command get AHRS_sp3003D.platform_orientation degree
2015-01-29T23:46:32.357Z,1422575192.357 [CommandLine](IMPORTANT): AHRS_sp3003D.platform_orientation 14.254622 arcdeg
2015-01-29T23:46:32.717Z,1422575192.717 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:46:32.732Z,1422575192.732 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:46:32.730Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:46:32.734Z,1422575192.734 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:46:32.733Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:46:32.737Z,1422575192.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:46:33.131Z,1422575193.131 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:46:33.161Z,1422575193.161 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:46:33.159Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:46:33.163Z,1422575193.163 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:46:33.162Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:46:33.166Z,1422575193.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:46:33.549Z,1422575193.549 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:46:33.581Z,1422575193.581 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:46:33.579Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:46:33.583Z,1422575193.583 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:46:33.582Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:46:33.586Z,1422575193.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:46:33.971Z,1422575193.971 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:46:33.988Z,1422575193.988 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:46:33.987Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:46:33.991Z,1422575193.991 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:46:33.989Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:46:33.993Z,1422575193.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:46:34.385Z,1422575194.385 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:46:34.399Z,1422575194.399 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:46:34.398Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:46:34.402Z,1422575194.402 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:46:34.400Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:46:34.404Z,1422575194.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:46:34.801Z,1422575194.801 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:46:34.828Z,1422575194.828 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:46:34.827Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:46:34.831Z,1422575194.831 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:46:34.829Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:46:34.833Z,1422575194.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:46:35.226Z,1422575195.226 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:46:35.241Z,1422575195.241 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:46:35.240Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:46:35.243Z,1422575195.243 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:46:35.242Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:46:35.246Z,1422575195.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:46:35.639Z,1422575195.639 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:46:35.653Z,1422575195.653 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:46:35.652Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:46:35.655Z,1422575195.655 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:46:35.654Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:46:35.674Z,1422575195.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:46:36.072Z,1422575196.072 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:46:36.105Z,1422575196.105 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:46:36.103Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:46:36.107Z,1422575196.107 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:46:36.106Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:46:36.109Z,1422575196.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:46:36.524Z,1422575196.524 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:46:36.575Z,1422575196.575 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:46:36.558Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:46:36.578Z,1422575196.578 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:46:36.576Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:46:36.585Z,1422575196.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:46:36.973Z,1422575196.973 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:46:37.006Z,1422575197.006 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:46:37.005Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:46:37.009Z,1422575197.009 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:46:37.007Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:46:37.027Z,1422575197.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:46:37.425Z,1422575197.425 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:46:37.441Z,1422575197.441 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:46:37.439Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:46:37.443Z,1422575197.443 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:46:37.442Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:46:37.445Z,1422575197.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:46:37.838Z,1422575197.838 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:46:37.853Z,1422575197.853 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:46:37.852Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:46:37.855Z,1422575197.855 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:46:37.854Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:46:37.858Z,1422575197.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:46:38.251Z,1422575198.251 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:46:38.281Z,1422575198.281 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:46:38.264Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:46:38.284Z,1422575198.284 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:46:38.282Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:46:38.290Z,1422575198.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:46:38.684Z,1422575198.684 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:46:38.699Z,1422575198.699 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:46:38.697Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:46:38.701Z,1422575198.701 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:46:38.700Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:46:38.703Z,1422575198.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:46:39.109Z,1422575199.109 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:46:39.170Z,1422575199.170 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:46:39.169Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:46:39.181Z,1422575199.181 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:46:39.180Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:46:39.184Z,1422575199.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:46:39.605Z,1422575199.605 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:46:39.665Z,1422575199.665 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:46:39.659Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:46:39.667Z,1422575199.667 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:46:39.666Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:46:39.673Z,1422575199.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:46:40.062Z,1422575200.062 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:46:40.078Z,1422575200.078 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:46:40.077Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:46:40.101Z,1422575200.101 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:46:40.079Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:46:40.103Z,1422575200.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:46:40.498Z,1422575200.498 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:46:40.560Z,1422575200.560 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:46:40.558Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:46:40.562Z,1422575200.562 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:46:40.561Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:46:40.564Z,1422575200.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:46:40.960Z,1422575200.960 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:46:40.975Z,1422575200.975 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:46:40.973Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:46:40.977Z,1422575200.977 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:46:40.976Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:46:40.979Z,1422575200.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:46:41.396Z,1422575201.396 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:46:41.470Z,1422575201.470 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:46:41.468Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:46:41.472Z,1422575201.472 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:46:41.471Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:46:41.475Z,1422575201.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:46:41.970Z,1422575201.970 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:46:42.004Z,1422575202.004 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:46:42.003Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:46:42.007Z,1422575202.007 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:46:42.005Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:46:42.009Z,1422575202.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:46:42.390Z,1422575202.390 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:46:42.459Z,1422575202.459 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:46:42.458Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:46:42.462Z,1422575202.462 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:46:42.460Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:46:42.464Z,1422575202.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:46:42.866Z,1422575202.866 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:46:42.957Z,1422575202.957 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:46:42.956Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:46:42.959Z,1422575202.959 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:46:42.958Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:46:42.962Z,1422575202.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:46:43.351Z,1422575203.351 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:46:43.367Z,1422575203.367 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:46:43.366Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:46:43.369Z,1422575203.369 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:46:43.368Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:46:43.371Z,1422575203.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:46:43.763Z,1422575203.763 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:46:43.778Z,1422575203.778 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:46:43.776Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:46:43.780Z,1422575203.780 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:46:43.779Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:46:43.783Z,1422575203.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:46:44.172Z,1422575204.172 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:46:44.186Z,1422575204.186 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:46:44.184Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:46:44.188Z,1422575204.188 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:46:44.187Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:46:44.213Z,1422575204.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:46:44.581Z,1422575204.581 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:46:44.607Z,1422575204.607 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:46:44.606Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:46:44.610Z,1422575204.610 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:46:44.608Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:46:44.612Z,1422575204.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:46:45.001Z,1422575205.001 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:46:45.016Z,1422575205.016 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:46:45.015Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:46:45.019Z,1422575205.019 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:46:45.017Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:46:45.021Z,1422575205.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:46:45.414Z,1422575205.414 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:46:45.428Z,1422575205.428 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:46:45.426Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:46:45.430Z,1422575205.430 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:46:45.429Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:46:45.432Z,1422575205.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:46:45.823Z,1422575205.823 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:46:45.837Z,1422575205.837 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:46:45.836Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:46:45.839Z,1422575205.839 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:46:45.838Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:46:45.842Z,1422575205.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:46:46.239Z,1422575206.239 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:46:46.278Z,1422575206.278 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:46:46.276Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:46:46.280Z,1422575206.280 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:46:46.279Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:46:46.282Z,1422575206.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:46:46.688Z,1422575206.688 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:46:46.725Z,1422575206.725 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:46:46.724Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:46:46.728Z,1422575206.728 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:46:46.726Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:46:46.730Z,1422575206.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:46:47.125Z,1422575207.125 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:46:47.139Z,1422575207.139 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:46:47.138Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:46:47.141Z,1422575207.141 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:46:47.140Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:46:47.144Z,1422575207.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:46:47.525Z,1422575207.525 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:46:47.569Z,1422575207.569 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:46:47.567Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:46:47.571Z,1422575207.571 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:46:47.570Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:46:47.574Z,1422575207.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:46:47.974Z,1422575207.974 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:46:47.988Z,1422575207.988 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:46:47.987Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:46:47.991Z,1422575207.991 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:46:47.989Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:46:47.993Z,1422575207.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:46:48.383Z,1422575208.383 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:46:48.397Z,1422575208.397 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:46:48.396Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:46:48.399Z,1422575208.399 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:46:48.398Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:46:48.426Z,1422575208.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:46:48.795Z,1422575208.795 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:46:48.821Z,1422575208.821 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:46:48.820Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:46:48.824Z,1422575208.824 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:46:48.823Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:46:48.827Z,1422575208.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:46:49.223Z,1422575209.223 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:46:49.241Z,1422575209.241 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:46:49.239Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:46:49.243Z,1422575209.243 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:46:49.241Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:46:49.245Z,1422575209.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:46:49.633Z,1422575209.633 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:46:49.717Z,1422575209.717 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:46:49.715Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:46:49.719Z,1422575209.719 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:46:49.718Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:46:49.722Z,1422575209.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:46:50.114Z,1422575210.114 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:46:50.131Z,1422575210.131 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:46:50.129Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:46:50.133Z,1422575210.133 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:46:50.132Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:46:50.136Z,1422575210.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:46:50.526Z,1422575210.526 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:46:50.541Z,1422575210.541 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:46:50.539Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:46:50.543Z,1422575210.543 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:46:50.542Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:46:50.545Z,1422575210.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:46:50.943Z,1422575210.943 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:46:50.957Z,1422575210.957 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:46:50.956Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:46:50.960Z,1422575210.960 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:46:50.958Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:46:50.962Z,1422575210.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:46:51.359Z,1422575211.359 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:46:51.385Z,1422575211.385 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:46:51.384Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:46:51.387Z,1422575211.387 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:46:51.386Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:46:51.390Z,1422575211.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:46:51.792Z,1422575211.792 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:46:51.835Z,1422575211.835 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:46:51.834Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:46:51.838Z,1422575211.838 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:46:51.836Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:46:51.840Z,1422575211.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:46:52.229Z,1422575212.229 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:46:52.243Z,1422575212.243 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:46:52.242Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:46:52.246Z,1422575212.246 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:46:52.244Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:46:52.248Z,1422575212.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:46:52.642Z,1422575212.642 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:46:52.688Z,1422575212.688 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:46:52.686Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:46:52.690Z,1422575212.690 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:46:52.689Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:46:52.693Z,1422575212.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:46:53.082Z,1422575213.082 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:46:53.114Z,1422575213.114 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:46:53.112Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:46:53.116Z,1422575213.116 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:46:53.114Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:46:53.138Z,1422575213.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:46:53.503Z,1422575213.503 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:46:53.520Z,1422575213.520 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:46:53.518Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:46:53.542Z,1422575213.542 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:46:53.521Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:46:53.545Z,1422575213.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:46:53.919Z,1422575213.919 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:46:53.989Z,1422575213.989 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:46:53.988Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:46:53.996Z,1422575213.996 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:46:53.994Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:46:54.002Z,1422575214.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:46:54.360Z,1422575214.360 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:46:54.391Z,1422575214.391 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:46:54.373Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:46:54.394Z,1422575214.394 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:46:54.392Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:46:54.400Z,1422575214.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:46:54.786Z,1422575214.786 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:46:54.801Z,1422575214.801 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:46:54.799Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:46:54.803Z,1422575214.803 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:46:54.802Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:46:54.806Z,1422575214.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:46:55.197Z,1422575215.197 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:46:55.259Z,1422575215.259 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:46:55.257Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:46:55.265Z,1422575215.265 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:46:55.264Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:46:55.267Z,1422575215.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:46:55.646Z,1422575215.646 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:46:55.661Z,1422575215.661 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:46:55.659Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:46:55.663Z,1422575215.663 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:46:55.662Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:46:55.666Z,1422575215.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:46:56.059Z,1422575216.059 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:46:56.117Z,1422575216.117 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:46:56.116Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:46:56.120Z,1422575216.120 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:46:56.118Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:46:56.122Z,1422575216.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:46:56.508Z,1422575216.508 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:46:56.570Z,1422575216.570 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:46:56.568Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:46:56.572Z,1422575216.572 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:46:56.571Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:46:56.575Z,1422575216.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:46:56.961Z,1422575216.961 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:46:56.987Z,1422575216.987 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:46:56.986Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:46:56.990Z,1422575216.990 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:46:56.988Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:46:56.992Z,1422575216.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:46:57.385Z,1422575217.385 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:46:57.423Z,1422575217.423 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:46:57.422Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:46:57.425Z,1422575217.425 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:46:57.424Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:46:57.428Z,1422575217.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:46:57.817Z,1422575217.817 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:46:57.891Z,1422575217.891 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:46:57.890Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:46:57.894Z,1422575217.894 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:46:57.892Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:46:57.896Z,1422575217.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:46:58.282Z,1422575218.282 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:46:58.296Z,1422575218.296 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:46:58.294Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:46:58.298Z,1422575218.298 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:46:58.297Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:46:58.300Z,1422575218.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:46:58.691Z,1422575218.691 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:46:58.705Z,1422575218.705 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:46:58.704Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:46:58.707Z,1422575218.707 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:46:58.706Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:46:58.710Z,1422575218.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:46:59.091Z,1422575219.091 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:46:59.140Z,1422575219.140 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:46:59.138Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:46:59.146Z,1422575219.146 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:46:59.141Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:46:59.148Z,1422575219.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:46:59.548Z,1422575219.548 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:46:59.563Z,1422575219.563 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:46:59.562Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:46:59.565Z,1422575219.565 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:46:59.564Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:46:59.568Z,1422575219.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:46:59.961Z,1422575219.961 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:46:59.990Z,1422575219.990 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:46:59.989Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:46:59.993Z,1422575219.993 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:46:59.992Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:46:59.995Z,1422575219.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:47:00.374Z,1422575220.374 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:47:00.392Z,1422575220.392 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:47:00.390Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:47:00.394Z,1422575220.394 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:47:00.393Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:47:00.397Z,1422575220.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:47:00.790Z,1422575220.790 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:47:00.804Z,1422575220.804 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:47:00.802Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:47:00.806Z,1422575220.806 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:47:00.805Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:47:00.809Z,1422575220.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:47:01.202Z,1422575221.202 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:47:01.220Z,1422575221.220 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:47:01.218Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:47:01.222Z,1422575221.222 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:47:01.221Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:47:01.224Z,1422575221.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:47:01.632Z,1422575221.632 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:47:01.647Z,1422575221.647 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:47:01.646Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:47:01.650Z,1422575221.650 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:47:01.648Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:47:01.652Z,1422575221.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:47:02.036Z,1422575222.036 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:47:02.099Z,1422575222.099 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:47:02.098Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:47:02.101Z,1422575222.101 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:47:02.100Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:47:02.104Z,1422575222.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:47:02.473Z,1422575222.473 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:47:02.513Z,1422575222.513 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:47:02.512Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:47:02.516Z,1422575222.516 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:47:02.514Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:47:02.518Z,1422575222.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:47:02.913Z,1422575222.913 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:47:02.995Z,1422575222.995 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:47:02.994Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:47:03.002Z,1422575223.002 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:47:03.000Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:47:03.008Z,1422575223.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:47:03.382Z,1422575223.382 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:47:03.396Z,1422575223.396 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:47:03.395Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:47:03.399Z,1422575223.399 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:47:03.397Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:47:03.401Z,1422575223.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:47:03.791Z,1422575223.791 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:47:03.806Z,1422575223.806 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:47:03.804Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:47:03.808Z,1422575223.808 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:47:03.807Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:47:03.810Z,1422575223.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:47:04.199Z,1422575224.199 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:47:04.214Z,1422575224.214 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:47:04.212Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:47:04.216Z,1422575224.216 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:47:04.215Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:47:04.218Z,1422575224.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:47:04.620Z,1422575224.620 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:47:04.650Z,1422575224.650 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:47:04.648Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:47:04.652Z,1422575224.652 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:47:04.651Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:47:04.654Z,1422575224.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:47:05.041Z,1422575225.041 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:47:05.061Z,1422575225.061 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:47:05.060Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:47:05.064Z,1422575225.064 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:47:05.062Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:47:05.066Z,1422575225.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:47:05.469Z,1422575225.469 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:47:05.540Z,1422575225.540 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:47:05.534Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:47:05.542Z,1422575225.542 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:47:05.541Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:47:05.549Z,1422575225.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:47:05.938Z,1422575225.938 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:47:06.051Z,1422575226.051 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:47:06.050Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:47:06.053Z,1422575226.053 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:47:06.052Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:47:06.070Z,1422575226.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:47:06.451Z,1422575226.451 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:47:06.467Z,1422575226.467 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:47:06.466Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:47:06.470Z,1422575226.470 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:47:06.468Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:47:06.472Z,1422575226.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:47:06.867Z,1422575226.867 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:47:06.882Z,1422575226.882 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:47:06.880Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:47:06.884Z,1422575226.884 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:47:06.883Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:47:06.887Z,1422575226.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:47:07.268Z,1422575227.268 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:47:07.314Z,1422575227.314 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:47:07.312Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:47:07.316Z,1422575227.316 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:47:07.315Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:47:07.319Z,1422575227.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:47:07.698Z,1422575227.698 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:47:07.718Z,1422575227.718 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:47:07.717Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:47:07.721Z,1422575227.721 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:47:07.719Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:47:07.723Z,1422575227.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:47:08.109Z,1422575228.109 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:47:08.142Z,1422575228.142 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:47:08.141Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:47:08.165Z,1422575228.165 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:47:08.164Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:47:08.168Z,1422575228.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:47:08.178Z,1422575228.178 [Default:UpdateAndReportMinutesSinceMissionStarted] Running Loop=1
2015-01-29T23:47:08.178Z,1422575228.178 [Default:UpdateAndReportMinutesSinceMissionStarted](INFO): Aggregate::initialize Default:UpdateAndReportMinutesSinceMissionStarted
2015-01-29T23:47:08.179Z,1422575228.179 [Default:UpdateAndReportMinutesSinceMissionStarted:A] Running Loop=1
2015-01-29T23:47:08.185Z,1422575228.185 [Default:UpdateAndReportMinutesSinceMissionStarted:A] Stopped
2015-01-29T23:47:08.185Z,1422575228.185 [Default:UpdateAndReportMinutesSinceMissionStarted:B] Running Loop=1
2015-01-29T23:47:08.542Z,1422575228.542 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:47:08.632Z,1422575228.632 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:47:08.630Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:47:08.638Z,1422575228.638 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:47:08.637Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:47:08.645Z,1422575228.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:47:08.656Z,1422575228.656 [Default:UpdateAndReportMinutesSinceMissionStarted:B](IMPORTANT): Default mission has been running for 1.911170 min 
2015-01-29T23:47:08.662Z,1422575228.662 [Default:UpdateAndReportMinutesSinceMissionStarted:B] Stopped
2015-01-29T23:47:08.662Z,1422575228.662 [Default:UpdateAndReportMinutesSinceMissionStarted](INFO): Completed Default:UpdateAndReportMinutesSinceMissionStarted
2015-01-29T23:47:08.662Z,1422575228.662 [Default:UpdateAndReportMinutesSinceMissionStarted] Stopped
2015-01-29T23:47:08.662Z,1422575228.662 [Default:UpdateAndReportMinutesSinceMissionStarted](INFO): Aggregate::uninitialize Default:UpdateAndReportMinutesSinceMissionStarted
2015-01-29T23:47:09.019Z,1422575229.019 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:47:09.035Z,1422575229.035 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:47:09.033Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:47:09.037Z,1422575229.037 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:47:09.036Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:47:09.039Z,1422575229.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:47:09.439Z,1422575229.439 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:47:09.454Z,1422575229.454 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:47:09.452Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:47:09.456Z,1422575229.456 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:47:09.455Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:47:09.475Z,1422575229.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:47:09.852Z,1422575229.852 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:47:09.899Z,1422575229.899 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:47:09.897Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:47:09.901Z,1422575229.901 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:47:09.900Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:47:09.904Z,1422575229.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:47:10.301Z,1422575230.301 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:47:10.331Z,1422575230.331 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:47:10.329Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:47:10.333Z,1422575230.333 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:47:10.332Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:47:10.335Z,1422575230.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:47:10.725Z,1422575230.725 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:47:10.782Z,1422575230.782 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:47:10.781Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:47:10.785Z,1422575230.785 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:47:10.783Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:47:10.787Z,1422575230.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:47:11.167Z,1422575231.167 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:47:11.227Z,1422575231.227 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:47:11.226Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:47:11.230Z,1422575231.230 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:47:11.228Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:47:11.232Z,1422575231.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:47:11.619Z,1422575231.619 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:47:11.652Z,1422575231.652 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:47:11.651Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:47:11.655Z,1422575231.655 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:47:11.653Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:47:11.657Z,1422575231.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:47:12.072Z,1422575232.072 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:47:12.088Z,1422575232.088 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:47:12.087Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:47:12.091Z,1422575232.091 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:47:12.089Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:47:12.093Z,1422575232.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:47:12.500Z,1422575232.500 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:47:12.541Z,1422575232.541 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:47:12.540Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:47:12.544Z,1422575232.544 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:47:12.542Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:47:12.546Z,1422575232.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:47:12.945Z,1422575232.945 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:47:12.963Z,1422575232.963 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:47:12.961Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:47:12.965Z,1422575232.965 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:47:12.964Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:47:12.992Z,1422575232.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:47:13.353Z,1422575233.353 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:47:13.391Z,1422575233.391 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:47:13.389Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:47:13.393Z,1422575233.393 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:47:13.392Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:47:13.395Z,1422575233.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:47:13.794Z,1422575233.794 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:47:13.809Z,1422575233.809 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:47:13.807Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:47:13.811Z,1422575233.811 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:47:13.809Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:47:13.813Z,1422575233.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:47:14.203Z,1422575234.203 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:47:14.217Z,1422575234.217 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:47:14.216Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:47:14.220Z,1422575234.220 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:47:14.218Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:47:14.245Z,1422575234.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:47:14.613Z,1422575234.613 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:47:14.653Z,1422575234.653 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:47:14.651Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:47:14.655Z,1422575234.655 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:47:14.654Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:47:14.658Z,1422575234.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:47:15.056Z,1422575235.056 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:47:15.072Z,1422575235.072 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:47:15.071Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:47:15.091Z,1422575235.091 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:47:15.073Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:47:15.093Z,1422575235.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:47:15.465Z,1422575235.465 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:47:15.479Z,1422575235.479 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:47:15.478Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:47:15.482Z,1422575235.482 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:47:15.480Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:47:15.507Z,1422575235.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:47:15.905Z,1422575235.905 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:47:15.920Z,1422575235.920 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:47:15.919Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:47:15.922Z,1422575235.922 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:47:15.921Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:47:15.925Z,1422575235.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:47:16.318Z,1422575236.318 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:47:16.332Z,1422575236.332 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:47:16.331Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:47:16.335Z,1422575236.335 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:47:16.333Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:47:16.337Z,1422575236.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:47:16.725Z,1422575236.725 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:47:16.740Z,1422575236.740 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:47:16.738Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:47:16.754Z,1422575236.754 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:47:16.753Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:47:16.756Z,1422575236.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:47:17.139Z,1422575237.139 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:47:17.165Z,1422575237.165 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:47:17.164Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:47:17.168Z,1422575237.168 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:47:17.166Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:47:17.170Z,1422575237.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:47:17.564Z,1422575237.564 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:47:17.618Z,1422575237.618 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:47:17.616Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:47:17.620Z,1422575237.620 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:47:17.619Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:47:17.623Z,1422575237.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:47:18.013Z,1422575238.013 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:47:18.043Z,1422575238.043 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:47:18.042Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:47:18.046Z,1422575238.046 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:47:18.044Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:47:18.068Z,1422575238.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:47:18.449Z,1422575238.449 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:47:18.491Z,1422575238.491 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:47:18.489Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:47:18.493Z,1422575238.493 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:47:18.492Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:47:18.495Z,1422575238.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:47:18.894Z,1422575238.894 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:47:18.924Z,1422575238.924 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:47:18.922Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:47:18.926Z,1422575238.926 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:47:18.925Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:47:18.928Z,1422575238.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:47:19.311Z,1422575239.311 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:47:19.327Z,1422575239.327 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:47:19.325Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:47:19.329Z,1422575239.329 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:47:19.328Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:47:19.331Z,1422575239.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:47:19.720Z,1422575239.720 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:47:19.734Z,1422575239.734 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:47:19.733Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:47:19.737Z,1422575239.737 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:47:19.735Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:47:19.739Z,1422575239.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:47:20.136Z,1422575240.136 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:47:20.150Z,1422575240.150 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:47:20.149Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:47:20.153Z,1422575240.153 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:47:20.151Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:47:20.155Z,1422575240.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:47:20.544Z,1422575240.544 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:47:20.559Z,1422575240.559 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:47:20.558Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:47:20.561Z,1422575240.561 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:47:20.560Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:47:20.588Z,1422575240.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:47:20.957Z,1422575240.957 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:47:20.993Z,1422575240.993 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:47:20.991Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:47:20.995Z,1422575240.995 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:47:20.994Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:47:20.998Z,1422575240.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:47:21.382Z,1422575241.382 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:47:21.412Z,1422575241.412 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:47:21.410Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:47:21.443Z,1422575241.443 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:47:21.442Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:47:21.445Z,1422575241.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:47:21.810Z,1422575241.810 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:47:21.844Z,1422575241.844 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:47:21.843Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:47:21.848Z,1422575241.848 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:47:21.846Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:47:21.850Z,1422575241.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:47:22.232Z,1422575242.232 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:47:22.314Z,1422575242.314 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:47:22.308Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:47:22.316Z,1422575242.316 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:47:22.315Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:47:22.323Z,1422575242.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:47:22.708Z,1422575242.708 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:47:22.749Z,1422575242.749 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:47:22.748Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:47:22.751Z,1422575242.751 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:47:22.750Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:47:22.754Z,1422575242.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:47:23.141Z,1422575243.141 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:47:23.143Z,1422575243.143 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2015-01-29T23:47:23.206Z,1422575243.206 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:47:23.204Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:47:23.208Z,1422575243.208 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:47:23.207Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:47:23.210Z,1422575243.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:47:23.590Z,1422575243.590 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:47:23.605Z,1422575243.605 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:47:23.603Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:47:23.607Z,1422575243.607 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:47:23.606Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:47:23.609Z,1422575243.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:47:24.010Z,1422575244.010 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:47:24.061Z,1422575244.061 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:47:24.059Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:47:24.063Z,1422575244.063 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:47:24.062Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:47:24.066Z,1422575244.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:47:24.463Z,1422575244.463 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:47:24.566Z,1422575244.566 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:47:24.564Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:47:24.568Z,1422575244.568 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:47:24.567Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:47:24.570Z,1422575244.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:47:24.959Z,1422575244.959 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:47:25.002Z,1422575245.002 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:47:25.000Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:47:25.004Z,1422575245.004 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:47:25.003Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:47:25.007Z,1422575245.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:47:25.400Z,1422575245.400 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:47:25.415Z,1422575245.415 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:47:25.413Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:47:25.417Z,1422575245.417 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:47:25.416Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:47:25.419Z,1422575245.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:47:25.809Z,1422575245.809 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:47:25.823Z,1422575245.823 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:47:25.822Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:47:25.825Z,1422575245.825 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:47:25.824Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:47:25.828Z,1422575245.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:47:26.213Z,1422575246.213 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:47:26.259Z,1422575246.259 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:47:26.257Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:47:26.261Z,1422575246.261 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:47:26.260Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:47:26.264Z,1422575246.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:47:26.662Z,1422575246.662 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:47:26.701Z,1422575246.701 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:47:26.699Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:47:26.703Z,1422575246.703 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:47:26.702Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:47:26.709Z,1422575246.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:47:27.095Z,1422575247.095 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:47:27.122Z,1422575247.122 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:47:27.121Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:47:27.125Z,1422575247.125 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:47:27.123Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:47:27.127Z,1422575247.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:47:27.523Z,1422575247.523 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:47:27.570Z,1422575247.570 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:47:27.568Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:47:27.572Z,1422575247.572 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:47:27.571Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:47:27.574Z,1422575247.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:47:27.972Z,1422575247.972 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:47:28.004Z,1422575248.004 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:47:28.003Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:47:28.008Z,1422575248.008 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:47:28.005Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:47:28.012Z,1422575248.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:47:28.381Z,1422575248.381 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:47:28.410Z,1422575248.410 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:47:28.409Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:47:28.413Z,1422575248.413 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:47:28.411Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:47:28.415Z,1422575248.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:47:28.809Z,1422575248.809 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:47:28.827Z,1422575248.827 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:47:28.825Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:47:28.829Z,1422575248.829 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:47:28.828Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:47:28.832Z,1422575248.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:47:29.218Z,1422575249.218 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:47:29.261Z,1422575249.261 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:47:29.259Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:47:29.266Z,1422575249.266 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:47:29.265Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:47:29.269Z,1422575249.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:47:29.655Z,1422575249.655 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:47:29.682Z,1422575249.682 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:47:29.680Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:47:29.684Z,1422575249.684 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:47:29.683Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:47:29.687Z,1422575249.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:47:30.074Z,1422575250.074 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:47:30.113Z,1422575250.113 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:47:30.111Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:47:30.115Z,1422575250.115 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:47:30.114Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:47:30.118Z,1422575250.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:47:30.516Z,1422575250.516 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:47:30.604Z,1422575250.604 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:47:30.594Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:47:30.606Z,1422575250.606 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:47:30.605Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:47:30.616Z,1422575250.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:47:30.997Z,1422575250.997 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:47:31.024Z,1422575251.024 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:47:31.022Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:47:31.026Z,1422575251.026 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:47:31.025Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:47:31.028Z,1422575251.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:47:31.417Z,1422575251.417 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:47:31.433Z,1422575251.433 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:47:31.431Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:47:31.435Z,1422575251.435 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:47:31.434Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:47:31.438Z,1422575251.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:47:31.834Z,1422575251.834 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:47:31.848Z,1422575251.848 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:47:31.847Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:47:31.851Z,1422575251.851 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:47:31.849Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:47:31.853Z,1422575251.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:47:32.255Z,1422575252.255 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:47:32.283Z,1422575252.283 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:47:32.282Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:47:32.285Z,1422575252.285 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:47:32.284Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:47:32.288Z,1422575252.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:47:32.687Z,1422575252.687 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:47:32.730Z,1422575252.730 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:47:32.728Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:47:32.732Z,1422575252.732 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:47:32.731Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:47:32.735Z,1422575252.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:47:33.128Z,1422575253.128 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:47:33.178Z,1422575253.178 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:47:33.177Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:47:33.181Z,1422575253.181 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:47:33.179Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:47:33.183Z,1422575253.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:47:33.567Z,1422575253.567 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:47:33.598Z,1422575253.598 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:47:33.596Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:47:33.600Z,1422575253.600 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:47:33.599Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:47:33.602Z,1422575253.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:47:33.993Z,1422575253.993 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:47:34.010Z,1422575254.010 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:47:34.009Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:47:34.013Z,1422575254.013 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:47:34.011Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:47:34.015Z,1422575254.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:47:34.406Z,1422575254.406 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:47:34.438Z,1422575254.438 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:47:34.419Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:47:34.440Z,1422575254.440 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:47:34.439Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:47:34.442Z,1422575254.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:47:34.828Z,1422575254.828 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:47:34.886Z,1422575254.886 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:47:34.884Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:47:34.896Z,1422575254.896 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:47:34.895Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:47:34.905Z,1422575254.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:47:35.276Z,1422575255.276 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:47:35.351Z,1422575255.351 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:47:35.349Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:47:35.354Z,1422575255.354 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:47:35.352Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:47:35.356Z,1422575255.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:47:35.748Z,1422575255.748 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:47:35.807Z,1422575255.807 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:47:35.805Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:47:35.809Z,1422575255.809 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:47:35.808Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:47:35.812Z,1422575255.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:47:36.200Z,1422575256.200 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:47:36.241Z,1422575256.241 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:47:36.239Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:47:36.243Z,1422575256.243 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:47:36.242Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:47:36.257Z,1422575256.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:47:36.609Z,1422575256.609 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:47:36.692Z,1422575256.692 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:47:36.690Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:47:36.694Z,1422575256.694 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:47:36.693Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:47:36.697Z,1422575256.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:47:37.087Z,1422575257.087 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:47:37.103Z,1422575257.103 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:47:37.101Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:47:37.105Z,1422575257.105 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:47:37.103Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:47:37.107Z,1422575257.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:47:37.495Z,1422575257.495 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:47:37.550Z,1422575257.550 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:47:37.548Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:47:37.552Z,1422575257.552 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:47:37.551Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:47:37.554Z,1422575257.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:47:37.936Z,1422575257.936 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:47:37.981Z,1422575257.981 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:47:37.980Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:47:37.999Z,1422575257.999 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:47:37.997Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:47:38.001Z,1422575258.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:47:38.385Z,1422575258.385 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:47:38.418Z,1422575258.418 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:47:38.417Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:47:38.420Z,1422575258.420 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:47:38.419Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:47:38.423Z,1422575258.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:47:38.808Z,1422575258.808 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:47:38.845Z,1422575258.845 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:47:38.844Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:47:38.852Z,1422575258.852 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:47:38.846Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:47:38.854Z,1422575258.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:47:39.233Z,1422575259.233 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:47:39.267Z,1422575259.267 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:47:39.265Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:47:39.269Z,1422575259.269 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:47:39.268Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:47:39.271Z,1422575259.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:47:39.666Z,1422575259.666 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:47:39.722Z,1422575259.722 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:47:39.715Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:47:39.724Z,1422575259.724 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:47:39.723Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:47:39.738Z,1422575259.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:47:40.115Z,1422575260.115 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:47:40.132Z,1422575260.132 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:47:40.130Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:47:40.134Z,1422575260.134 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:47:40.133Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:47:40.136Z,1422575260.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:47:40.539Z,1422575260.539 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:47:40.555Z,1422575260.555 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:47:40.553Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:47:40.557Z,1422575260.557 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:47:40.556Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:47:40.575Z,1422575260.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:47:40.948Z,1422575260.948 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:47:40.962Z,1422575260.962 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:47:40.960Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:47:40.964Z,1422575260.964 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:47:40.963Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:47:40.990Z,1422575260.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:47:41.357Z,1422575261.357 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:47:41.402Z,1422575261.402 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:47:41.400Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:47:41.404Z,1422575261.404 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:47:41.403Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:47:41.407Z,1422575261.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:47:41.793Z,1422575261.793 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:47:41.836Z,1422575261.836 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:47:41.834Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:47:41.838Z,1422575261.838 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:47:41.837Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:47:41.841Z,1422575261.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:47:42.230Z,1422575262.230 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:47:42.258Z,1422575262.258 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:47:42.256Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:47:42.260Z,1422575262.260 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:47:42.259Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:47:42.262Z,1422575262.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:47:42.659Z,1422575262.659 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:47:42.698Z,1422575262.698 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:47:42.697Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:47:42.701Z,1422575262.701 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:47:42.699Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:47:42.703Z,1422575262.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:47:43.103Z,1422575263.103 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:47:43.120Z,1422575263.120 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:47:43.119Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:47:43.139Z,1422575263.139 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:47:43.121Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:47:43.141Z,1422575263.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:47:43.508Z,1422575263.508 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:47:43.545Z,1422575263.545 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:47:43.544Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:47:43.547Z,1422575263.547 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:47:43.546Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:47:43.550Z,1422575263.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:47:43.934Z,1422575263.934 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:47:43.948Z,1422575263.948 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:47:43.947Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:47:43.951Z,1422575263.951 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:47:43.949Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:47:43.953Z,1422575263.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:47:44.345Z,1422575264.345 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:47:44.395Z,1422575264.395 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:47:44.394Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:47:44.403Z,1422575264.403 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:47:44.402Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:47:44.412Z,1422575264.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:47:44.778Z,1422575264.778 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:47:44.806Z,1422575264.806 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:47:44.804Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:47:44.808Z,1422575264.808 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:47:44.807Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:47:44.810Z,1422575264.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:47:45.211Z,1422575265.211 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:47:45.250Z,1422575265.250 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:47:45.249Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:47:45.252Z,1422575265.252 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:47:45.251Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:47:45.255Z,1422575265.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:47:45.651Z,1422575265.651 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:47:45.703Z,1422575265.703 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:47:45.702Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:47:45.705Z,1422575265.705 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:47:45.704Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:47:45.708Z,1422575265.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:47:46.074Z,1422575266.074 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:47:46.107Z,1422575266.107 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:47:46.105Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:47:46.109Z,1422575266.109 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:47:46.108Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:47:46.112Z,1422575266.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:47:46.485Z,1422575266.485 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:47:46.510Z,1422575266.510 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:47:46.509Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:47:46.513Z,1422575266.513 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:47:46.511Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:47:46.515Z,1422575266.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:47:46.906Z,1422575266.906 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:47:46.921Z,1422575266.921 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:47:46.919Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:47:46.923Z,1422575266.923 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:47:46.922Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:47:46.926Z,1422575266.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:47:47.318Z,1422575267.318 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:47:47.361Z,1422575267.361 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:47:47.359Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:47:47.363Z,1422575267.363 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:47:47.362Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:47:47.366Z,1422575267.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:47:47.759Z,1422575267.759 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:47:47.787Z,1422575267.787 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:47:47.785Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:47:47.810Z,1422575267.810 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:47:47.788Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:47:47.812Z,1422575267.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:47:48.183Z,1422575268.183 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:47:48.212Z,1422575268.212 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:47:48.211Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:47:48.215Z,1422575268.215 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:47:48.213Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:47:48.217Z,1422575268.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:47:48.623Z,1422575268.623 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:47:48.683Z,1422575268.683 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:47:48.677Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:47:48.689Z,1422575268.689 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:47:48.687Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:47:48.691Z,1422575268.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:47:49.085Z,1422575269.085 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:47:49.142Z,1422575269.142 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:47:49.140Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:47:49.145Z,1422575269.145 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:47:49.143Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:47:49.148Z,1422575269.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:47:49.550Z,1422575269.550 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:47:49.574Z,1422575269.574 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:47:49.573Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:47:49.576Z,1422575269.576 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:47:49.575Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:47:49.579Z,1422575269.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:47:49.990Z,1422575269.990 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:47:50.005Z,1422575270.005 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:47:50.003Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:47:50.007Z,1422575270.007 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:47:50.005Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:47:50.009Z,1422575270.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:47:50.411Z,1422575270.411 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:47:50.444Z,1422575270.444 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:47:50.442Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:47:50.446Z,1422575270.446 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:47:50.445Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:47:50.448Z,1422575270.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:47:50.835Z,1422575270.835 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:47:50.885Z,1422575270.885 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:47:50.883Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:47:50.887Z,1422575270.887 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:47:50.886Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:47:50.889Z,1422575270.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:47:51.264Z,1422575271.264 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:47:51.299Z,1422575271.299 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:47:51.297Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:47:51.301Z,1422575271.301 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:47:51.300Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:47:51.304Z,1422575271.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:47:51.693Z,1422575271.693 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:47:51.764Z,1422575271.764 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:47:51.762Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:47:51.766Z,1422575271.766 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:47:51.765Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:47:51.780Z,1422575271.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:47:52.154Z,1422575272.154 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:47:52.183Z,1422575272.183 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:47:52.182Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:47:52.186Z,1422575272.186 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:47:52.184Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:47:52.188Z,1422575272.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:47:52.572Z,1422575272.572 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:47:52.591Z,1422575272.591 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:47:52.590Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:47:52.594Z,1422575272.594 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:47:52.592Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:47:52.596Z,1422575272.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:47:52.979Z,1422575272.979 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:47:52.985Z,1422575272.985 [BPC1](FAULT): Failed to receive battery data
2015-01-29T23:47:52.985Z,1422575272.985 [BPC1] Communications Fault, FailCount= 1
2015-01-29T23:47:52.985Z,1422575272.985 [BPC1](ERROR): Communications Fault
2015-01-29T23:47:52.995Z,1422575272.995 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:47:52.993Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:47:52.997Z,1422575272.997 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:47:52.996Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:47:52.999Z,1422575272.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:47:53.016Z,1422575273.016 [CBIT](ERROR): Communications Fault in component: BPC1
2015-01-29T23:47:53.391Z,1422575273.391 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:47:53.441Z,1422575273.441 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:47:53.440Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:47:53.444Z,1422575273.444 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:47:53.442Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:47:53.446Z,1422575273.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:47:53.829Z,1422575273.829 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:47:53.861Z,1422575273.861 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:47:53.860Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:47:53.864Z,1422575273.864 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:47:53.863Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:47:53.866Z,1422575273.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:47:54.265Z,1422575274.265 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:47:54.297Z,1422575274.297 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:47:54.295Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:47:54.299Z,1422575274.299 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:47:54.298Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:47:54.301Z,1422575274.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:47:54.318Z,1422575274.318 [CBIT](INFO): Clearing failed state for component BPC1
2015-01-29T23:47:54.318Z,1422575274.318 [BPC1] No Fault, FailCount= 1
2015-01-29T23:47:54.697Z,1422575274.697 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:47:54.823Z,1422575274.823 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:47:54.822Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:47:54.826Z,1422575274.826 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:47:54.825Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:47:54.841Z,1422575274.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:47:55.236Z,1422575275.236 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:47:55.292Z,1422575275.292 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:47:55.276Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:47:55.294Z,1422575275.294 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:47:55.293Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:47:55.296Z,1422575275.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:47:55.684Z,1422575275.684 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:47:55.699Z,1422575275.699 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:47:55.698Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:47:55.702Z,1422575275.702 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:47:55.700Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:47:55.704Z,1422575275.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:47:56.103Z,1422575276.103 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:47:56.118Z,1422575276.118 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:47:56.116Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:47:56.120Z,1422575276.120 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:47:56.119Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:47:56.123Z,1422575276.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:47:56.512Z,1422575276.512 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:47:56.551Z,1422575276.551 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:47:56.550Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:47:56.554Z,1422575276.554 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:47:56.552Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:47:56.556Z,1422575276.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:47:56.945Z,1422575276.945 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:47:56.978Z,1422575276.978 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:47:56.977Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:47:57.001Z,1422575277.001 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:47:56.999Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:47:57.004Z,1422575277.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:47:57.386Z,1422575277.386 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:47:57.420Z,1422575277.420 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:47:57.419Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:47:57.423Z,1422575277.423 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:47:57.421Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:47:57.425Z,1422575277.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:47:57.823Z,1422575277.823 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:47:57.900Z,1422575277.900 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:47:57.898Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:47:57.902Z,1422575277.902 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:47:57.901Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:47:57.905Z,1422575277.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:47:58.291Z,1422575278.291 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:47:58.316Z,1422575278.316 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:47:58.314Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:47:58.318Z,1422575278.318 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:47:58.317Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:47:58.320Z,1422575278.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:47:58.719Z,1422575278.719 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:47:58.735Z,1422575278.735 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:47:58.733Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:47:58.737Z,1422575278.737 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:47:58.736Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:47:58.740Z,1422575278.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:47:59.124Z,1422575279.124 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:47:59.139Z,1422575279.139 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:47:59.137Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:47:59.141Z,1422575279.141 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:47:59.140Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:47:59.143Z,1422575279.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:47:59.525Z,1422575279.525 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:47:59.570Z,1422575279.570 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:47:59.569Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:47:59.573Z,1422575279.573 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:47:59.572Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:47:59.575Z,1422575279.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:47:59.973Z,1422575279.973 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:48:00.015Z,1422575280.015 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:48:00.014Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:48:00.018Z,1422575280.018 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:48:00.016Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:48:00.020Z,1422575280.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:48:00.405Z,1422575280.405 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:48:00.430Z,1422575280.430 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:48:00.429Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:48:00.432Z,1422575280.432 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:48:00.431Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:48:00.435Z,1422575280.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:48:00.830Z,1422575280.830 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:48:00.885Z,1422575280.885 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:48:00.883Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:48:00.891Z,1422575280.891 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:48:00.890Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:48:00.898Z,1422575280.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:48:01.284Z,1422575281.284 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:48:01.300Z,1422575281.300 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:48:01.299Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:48:01.302Z,1422575281.302 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:48:01.301Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:48:01.305Z,1422575281.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:48:01.684Z,1422575281.684 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:48:01.700Z,1422575281.700 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:48:01.699Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:48:01.703Z,1422575281.703 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:48:01.701Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:48:01.705Z,1422575281.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:48:02.094Z,1422575282.094 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:48:02.123Z,1422575282.123 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:48:02.122Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:48:02.125Z,1422575282.125 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:48:02.124Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:48:02.128Z,1422575282.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:48:02.515Z,1422575282.515 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:48:02.547Z,1422575282.547 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:48:02.545Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:48:02.549Z,1422575282.549 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:48:02.548Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:48:02.551Z,1422575282.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:48:02.946Z,1422575282.946 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:48:02.978Z,1422575282.978 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:48:02.977Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:48:02.981Z,1422575282.981 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:48:02.979Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:48:02.983Z,1422575282.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:48:03.375Z,1422575283.375 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:48:03.424Z,1422575283.424 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:48:03.423Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:48:03.427Z,1422575283.427 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:48:03.425Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:48:03.430Z,1422575283.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:48:03.831Z,1422575283.831 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:48:03.903Z,1422575283.903 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:48:03.902Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:48:03.905Z,1422575283.905 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:48:03.904Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:48:03.920Z,1422575283.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:48:04.292Z,1422575284.292 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:48:04.310Z,1422575284.310 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:48:04.308Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:48:04.328Z,1422575284.328 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:48:04.327Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:48:04.330Z,1422575284.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:48:04.705Z,1422575284.705 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:48:04.734Z,1422575284.734 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:48:04.733Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:48:04.737Z,1422575284.737 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:48:04.735Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:48:04.739Z,1422575284.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:48:05.129Z,1422575285.129 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:48:05.144Z,1422575285.144 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:48:05.142Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:48:05.146Z,1422575285.146 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:48:05.145Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:48:05.148Z,1422575285.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:48:05.542Z,1422575285.542 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:48:05.586Z,1422575285.586 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:48:05.584Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:48:05.588Z,1422575285.588 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:48:05.587Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:48:05.591Z,1422575285.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:48:05.979Z,1422575285.979 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:48:06.054Z,1422575286.054 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:48:06.053Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:48:06.056Z,1422575286.056 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:48:06.055Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:48:06.059Z,1422575286.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:48:06.444Z,1422575286.444 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:48:06.486Z,1422575286.486 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:48:06.484Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:48:06.488Z,1422575286.488 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:48:06.487Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:48:06.491Z,1422575286.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:48:06.881Z,1422575286.881 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:48:06.959Z,1422575286.959 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:48:06.957Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:48:06.967Z,1422575286.967 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:48:06.966Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:48:06.980Z,1422575286.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:48:07.349Z,1422575287.349 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:48:07.367Z,1422575287.367 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:48:07.365Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:48:07.369Z,1422575287.369 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:48:07.368Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:48:07.387Z,1422575287.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:48:07.758Z,1422575287.758 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:48:07.796Z,1422575287.796 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:48:07.795Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:48:07.798Z,1422575287.798 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:48:07.797Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:48:07.801Z,1422575287.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:48:08.191Z,1422575288.191 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:48:08.245Z,1422575288.245 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:48:08.244Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:48:08.248Z,1422575288.248 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:48:08.246Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:48:08.251Z,1422575288.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:48:08.643Z,1422575288.643 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:48:08.697Z,1422575288.697 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:48:08.696Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:48:08.699Z,1422575288.699 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:48:08.698Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:48:08.702Z,1422575288.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:48:09.076Z,1422575289.076 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:48:09.104Z,1422575289.104 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:48:09.102Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:48:09.107Z,1422575289.107 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:48:09.105Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:48:09.109Z,1422575289.109 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:48:09.109Z,1422575289.109 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 2
2015-01-29T23:48:09.109Z,1422575289.109 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2015-01-29T23:48:09.111Z,1422575289.111 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:48:09.111Z,1422575289.111 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 2
2015-01-29T23:48:09.112Z,1422575289.112 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2015-01-29T23:48:09.114Z,1422575289.114 [DeadReckonWithRespectToWater](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:48:09.114Z,1422575289.114 [DeadReckonWithRespectToWater] Software Fault, FailCount= 2
2015-01-29T23:48:09.114Z,1422575289.114 [DeadReckonWithRespectToWater](ERROR): Software Fault
2015-01-29T23:48:09.116Z,1422575289.116 [DeadReckonWithRespectToSeafloor](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:48:09.116Z,1422575289.116 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 2
2015-01-29T23:48:09.116Z,1422575289.116 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2015-01-29T23:48:09.119Z,1422575289.119 [DeadReckonUsingDVLWaterTrack](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:48:09.119Z,1422575289.119 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 2
2015-01-29T23:48:09.119Z,1422575289.119 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2015-01-29T23:48:09.121Z,1422575289.121 [DeadReckonUsingCompactModelForecast](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:48:09.121Z,1422575289.121 [DeadReckonUsingCompactModelForecast] Software Fault, FailCount= 2
2015-01-29T23:48:09.121Z,1422575289.121 [DeadReckonUsingCompactModelForecast](ERROR): Software Fault
2015-01-29T23:48:09.153Z,1422575289.153 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2015-01-29T23:48:09.154Z,1422575289.154 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2015-01-29T23:48:09.158Z,1422575289.158 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToWater
2015-01-29T23:48:09.159Z,1422575289.159 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2015-01-29T23:48:09.159Z,1422575289.159 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2015-01-29T23:48:09.159Z,1422575289.159 [CBIT](ERROR): Software Fault in component: DeadReckonUsingCompactModelForecast
2015-01-29T23:48:09.497Z,1422575289.497 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:48:09.512Z,1422575289.512 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:48:09.511Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:48:09.515Z,1422575289.515 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:48:09.513Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:48:09.528Z,1422575289.528 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2015-01-29T23:48:09.528Z,1422575289.528 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 2
2015-01-29T23:48:09.528Z,1422575289.528 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2015-01-29T23:48:09.529Z,1422575289.529 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 2
2015-01-29T23:48:09.529Z,1422575289.529 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToWater
2015-01-29T23:48:09.529Z,1422575289.529 [DeadReckonWithRespectToWater] No Fault, FailCount= 2
2015-01-29T23:48:09.530Z,1422575289.530 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2015-01-29T23:48:09.530Z,1422575289.530 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 2
2015-01-29T23:48:09.532Z,1422575289.532 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2015-01-29T23:48:09.532Z,1422575289.532 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 2
2015-01-29T23:48:09.532Z,1422575289.532 [CBIT](INFO): Clearing failed state for component DeadReckonUsingCompactModelForecast
2015-01-29T23:48:09.533Z,1422575289.533 [DeadReckonUsingCompactModelForecast] No Fault, FailCount= 2
2015-01-29T23:48:09.905Z,1422575289.905 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:48:09.938Z,1422575289.938 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:48:09.936Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:48:09.957Z,1422575289.957 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:48:09.939Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:48:09.958Z,1422575289.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2015-01-29T23:48:09.958Z,1422575289.958 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2015-01-29T23:48:09.958Z,1422575289.958 [DeadReckonWithRespectToWater](DEBUG): Initializing DeadReckonWithRespectToWater component.
2015-01-29T23:48:09.959Z,1422575289.959 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2015-01-29T23:48:09.959Z,1422575289.959 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2015-01-29T23:48:09.964Z,1422575289.964 [DeadReckonUsingCompactModelForecast](DEBUG): Initializing DeadReckonUsingCompactModelForecast component.
2015-01-29T23:48:10.333Z,1422575290.333 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:48:10.363Z,1422575290.363 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:48:10.362Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:48:10.366Z,1422575290.366 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:48:10.365Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:48:10.368Z,1422575290.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-01-29T23:48:10.369Z,1422575290.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:48:10.758Z,1422575290.758 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:48:10.773Z,1422575290.773 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:48:10.771Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:48:10.775Z,1422575290.775 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:48:10.774Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:48:10.777Z,1422575290.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-01-29T23:48:10.778Z,1422575290.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:48:11.171Z,1422575291.171 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:48:11.213Z,1422575291.213 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:48:11.212Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:48:11.216Z,1422575291.216 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:48:11.214Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:48:11.218Z,1422575291.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 2 cycles since last successful read, accepting data for 5 cycles.
2015-01-29T23:48:11.219Z,1422575291.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:48:11.612Z,1422575291.612 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:48:11.645Z,1422575291.645 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:48:11.643Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:48:11.667Z,1422575291.667 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:48:11.665Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:48:11.668Z,1422575291.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 3 cycles since last successful read, accepting data for 5 cycles.
2015-01-29T23:48:11.670Z,1422575291.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:48:12.040Z,1422575292.040 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:48:12.068Z,1422575292.068 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:48:12.067Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:48:12.070Z,1422575292.070 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:48:12.069Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:48:12.072Z,1422575292.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 4 cycles since last successful read, accepting data for 5 cycles.
2015-01-29T23:48:12.073Z,1422575292.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:48:12.461Z,1422575292.461 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:48:12.476Z,1422575292.476 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:48:12.474Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:48:12.478Z,1422575292.478 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:48:12.476Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:48:12.480Z,1422575292.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 5 cycles since last successful read, accepting data for 5 cycles.
2015-01-29T23:48:12.481Z,1422575292.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:48:12.877Z,1422575292.877 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:48:12.940Z,1422575292.940 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:48:12.938Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:48:12.946Z,1422575292.946 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:48:12.945Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:48:12.953Z,1422575292.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:48:13.330Z,1422575293.330 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:48:13.347Z,1422575293.347 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:48:13.346Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:48:13.349Z,1422575293.349 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:48:13.348Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:48:13.352Z,1422575293.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:48:13.743Z,1422575293.743 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:48:13.772Z,1422575293.772 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:48:13.771Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:48:13.775Z,1422575293.775 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:48:13.773Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:48:13.777Z,1422575293.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:48:14.171Z,1422575294.171 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:48:14.221Z,1422575294.221 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:48:14.220Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:48:14.224Z,1422575294.224 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:48:14.222Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:48:14.226Z,1422575294.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:48:14.613Z,1422575294.613 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:48:14.641Z,1422575294.641 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:48:14.639Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:48:14.643Z,1422575294.643 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:48:14.642Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:48:14.645Z,1422575294.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:48:15.042Z,1422575295.042 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:48:15.086Z,1422575295.086 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:48:15.085Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:48:15.089Z,1422575295.089 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:48:15.087Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:48:15.091Z,1422575295.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:48:15.485Z,1422575295.485 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:48:15.500Z,1422575295.500 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:48:15.498Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:48:15.502Z,1422575295.502 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:48:15.501Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:48:15.505Z,1422575295.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:48:15.890Z,1422575295.890 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:48:15.958Z,1422575295.958 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:48:15.956Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:48:15.965Z,1422575295.965 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:48:15.963Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:48:15.976Z,1422575295.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:48:16.343Z,1422575296.343 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:48:16.360Z,1422575296.360 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:48:16.359Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:48:16.362Z,1422575296.362 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:48:16.361Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:48:16.365Z,1422575296.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:48:16.756Z,1422575296.756 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:48:16.770Z,1422575296.770 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:48:16.768Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:48:16.772Z,1422575296.772 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:48:16.771Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:48:16.795Z,1422575296.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:48:17.164Z,1422575297.164 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:48:17.197Z,1422575297.197 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:48:17.196Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:48:17.201Z,1422575297.201 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:48:17.198Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:48:17.203Z,1422575297.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:48:17.597Z,1422575297.597 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:48:17.642Z,1422575297.642 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:48:17.641Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:48:17.645Z,1422575297.645 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:48:17.643Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:48:17.647Z,1422575297.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:48:18.031Z,1422575298.031 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:48:18.063Z,1422575298.063 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:48:18.062Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:48:18.066Z,1422575298.066 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:48:18.064Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:48:18.068Z,1422575298.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:48:18.466Z,1422575298.466 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:48:18.497Z,1422575298.497 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:48:18.495Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:48:18.499Z,1422575298.499 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:48:18.498Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:48:18.502Z,1422575298.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:48:18.891Z,1422575298.891 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:48:18.960Z,1422575298.960 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:48:18.959Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:48:18.963Z,1422575298.963 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:48:18.962Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:48:18.969Z,1422575298.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:48:19.351Z,1422575299.351 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:48:19.415Z,1422575299.415 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:48:19.413Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:48:19.417Z,1422575299.417 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:48:19.416Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:48:19.419Z,1422575299.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:48:19.803Z,1422575299.803 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:48:19.818Z,1422575299.818 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:48:19.816Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:48:19.820Z,1422575299.820 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:48:19.819Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:48:19.822Z,1422575299.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:48:20.213Z,1422575300.213 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:48:20.256Z,1422575300.256 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:48:20.254Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:48:20.258Z,1422575300.258 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:48:20.257Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:48:20.260Z,1422575300.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:48:20.657Z,1422575300.657 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:48:20.717Z,1422575300.717 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:48:20.715Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:48:20.719Z,1422575300.719 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:48:20.718Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:48:20.721Z,1422575300.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:48:21.112Z,1422575301.112 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:48:21.153Z,1422575301.153 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:48:21.151Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:48:21.155Z,1422575301.155 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:48:21.154Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:48:21.157Z,1422575301.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:48:21.544Z,1422575301.544 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:48:21.600Z,1422575301.600 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:48:21.599Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:48:21.603Z,1422575301.603 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:48:21.601Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:48:21.605Z,1422575301.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:48:21.992Z,1422575301.992 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:48:22.072Z,1422575302.072 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:48:22.070Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:48:22.074Z,1422575302.074 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:48:22.073Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:48:22.076Z,1422575302.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:48:22.465Z,1422575302.465 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:48:22.482Z,1422575302.482 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:48:22.481Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:48:22.484Z,1422575302.484 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:48:22.483Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:48:22.503Z,1422575302.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:48:22.873Z,1422575302.873 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:48:22.888Z,1422575302.888 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:48:22.886Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:48:22.890Z,1422575302.890 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:48:22.889Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:48:22.908Z,1422575302.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:48:23.281Z,1422575303.281 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:48:23.318Z,1422575303.318 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:48:23.316Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:48:23.320Z,1422575303.320 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:48:23.319Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:48:23.322Z,1422575303.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:48:23.710Z,1422575303.710 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:48:23.744Z,1422575303.744 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:48:23.742Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:48:23.762Z,1422575303.762 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:48:23.761Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:48:23.769Z,1422575303.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:48:24.143Z,1422575304.143 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:48:24.176Z,1422575304.176 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:48:24.175Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:48:24.179Z,1422575304.179 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:48:24.178Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:48:24.181Z,1422575304.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:48:24.579Z,1422575304.579 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:48:24.594Z,1422575304.594 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:48:24.592Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:48:24.596Z,1422575304.596 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:48:24.595Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:48:24.621Z,1422575304.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:48:24.997Z,1422575304.997 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:48:25.023Z,1422575305.023 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:48:25.022Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:48:25.026Z,1422575305.026 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:48:25.024Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:48:25.028Z,1422575305.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:48:25.413Z,1422575305.413 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:48:25.445Z,1422575305.445 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:48:25.444Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:48:25.448Z,1422575305.448 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:48:25.446Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:48:25.450Z,1422575305.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:48:25.863Z,1422575305.863 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:48:25.879Z,1422575305.879 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:48:25.877Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:48:25.881Z,1422575305.881 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:48:25.880Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:48:25.883Z,1422575305.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:48:26.274Z,1422575306.274 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:48:26.302Z,1422575306.302 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:48:26.300Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:48:26.304Z,1422575306.304 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:48:26.303Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:48:26.330Z,1422575306.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:48:26.699Z,1422575306.699 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:48:26.740Z,1422575306.740 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:48:26.739Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:48:26.743Z,1422575306.743 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:48:26.742Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:48:26.745Z,1422575306.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:48:27.131Z,1422575307.131 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:48:27.173Z,1422575307.173 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:48:27.171Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:48:27.175Z,1422575307.175 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:48:27.174Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:48:27.177Z,1422575307.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:48:27.552Z,1422575307.552 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:48:27.576Z,1422575307.576 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:48:27.575Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:48:27.579Z,1422575307.579 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:48:27.577Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:48:27.581Z,1422575307.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:48:27.969Z,1422575307.969 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:48:27.984Z,1422575307.984 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:48:27.982Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:48:27.986Z,1422575307.986 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:48:27.985Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:48:27.989Z,1422575307.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:48:28.385Z,1422575308.385 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:48:28.427Z,1422575308.427 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:48:28.426Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:48:28.430Z,1422575308.430 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:48:28.428Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:48:28.432Z,1422575308.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:48:28.820Z,1422575308.820 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:48:28.851Z,1422575308.851 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:48:28.849Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:48:28.853Z,1422575308.853 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:48:28.851Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:48:28.855Z,1422575308.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:48:29.263Z,1422575309.263 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:48:29.304Z,1422575309.304 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:48:29.303Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:48:29.307Z,1422575309.307 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:48:29.306Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:48:29.309Z,1422575309.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:48:29.707Z,1422575309.707 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:48:29.708Z,1422575309.708 [DVL_micro](FAULT): DVL failed to acquire valid data within timeout.
2015-01-29T23:48:29.708Z,1422575309.708 [DVL_micro] Data Fault, FailCount= 1
2015-01-29T23:48:29.708Z,1422575309.708 [DVL_micro](ERROR): Data Fault
2015-01-29T23:48:29.761Z,1422575309.761 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:48:29.759Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:48:29.763Z,1422575309.763 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:48:29.762Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:48:29.766Z,1422575309.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:48:29.811Z,1422575309.811 [CBIT](ERROR): Data Fault in component: DVL_micro
2015-01-29T23:48:30.235Z,1422575310.235 [DVL_micro](INFO): uninitialize:Powering down
2015-01-29T23:48:30.270Z,1422575310.270 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:48:30.268Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:48:30.272Z,1422575310.272 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:48:30.271Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:48:30.274Z,1422575310.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:48:30.653Z,1422575310.653 [DVL_micro](FAULT): LCB fault:  Software Overcurrent.
2015-01-29T23:48:30.653Z,1422575310.653 [DVL_micro] Hardware Fault, FailCount= 1
2015-01-29T23:48:30.653Z,1422575310.653 [DVL_micro](ERROR): Hardware Fault
2015-01-29T23:48:30.668Z,1422575310.668 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:48:30.667Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:48:30.670Z,1422575310.670 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:48:30.669Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:48:30.673Z,1422575310.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:48:31.072Z,1422575311.072 [DVL_micro](INFO): Initializing
2015-01-29T23:48:31.101Z,1422575311.101 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:48:31.099Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:48:31.103Z,1422575311.103 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:48:31.102Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:48:31.106Z,1422575311.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:48:31.123Z,1422575311.123 [CBIT](INFO): Clearing failed state for component DVL_micro
2015-01-29T23:48:31.123Z,1422575311.123 [DVL_micro] No Fault, FailCount= 1
2015-01-29T23:48:31.501Z,1422575311.501 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:48:31.500Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:48:31.504Z,1422575311.504 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:48:31.502Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:48:31.506Z,1422575311.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:48:31.924Z,1422575311.924 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:48:31.923Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:48:31.927Z,1422575311.927 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:48:31.926Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:48:31.929Z,1422575311.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:48:32.358Z,1422575312.358 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:48:32.357Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:48:32.361Z,1422575312.361 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:48:32.359Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:48:32.363Z,1422575312.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:48:32.811Z,1422575312.811 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:48:32.810Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:48:32.814Z,1422575312.814 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:48:32.812Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:48:32.816Z,1422575312.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:48:33.254Z,1422575313.254 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:48:33.253Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:48:33.257Z,1422575313.257 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:48:33.256Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:48:33.259Z,1422575313.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:48:33.680Z,1422575313.680 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:48:33.679Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:48:33.683Z,1422575313.683 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:48:33.681Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:48:33.711Z,1422575313.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:48:34.079Z,1422575314.079 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:48:34.078Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:48:34.081Z,1422575314.081 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:48:34.080Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:48:34.084Z,1422575314.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:48:34.544Z,1422575314.544 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:48:34.543Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:48:34.547Z,1422575314.547 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:48:34.545Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:48:34.549Z,1422575314.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:48:34.955Z,1422575314.955 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:48:34.953Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:48:34.957Z,1422575314.957 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:48:34.956Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:48:34.960Z,1422575314.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:48:35.422Z,1422575315.422 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:48:35.421Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:48:35.425Z,1422575315.425 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:48:35.423Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:48:35.427Z,1422575315.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:48:35.817Z,1422575315.817 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:48:35.895Z,1422575315.895 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:48:35.893Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:48:35.897Z,1422575315.897 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:48:35.896Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:48:35.900Z,1422575315.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:48:36.302Z,1422575316.302 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:48:36.351Z,1422575316.351 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:48:36.350Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:48:36.354Z,1422575316.354 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:48:36.353Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:48:36.357Z,1422575316.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:48:36.739Z,1422575316.739 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:48:36.754Z,1422575316.754 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:48:36.752Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:48:36.756Z,1422575316.756 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:48:36.755Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:48:36.759Z,1422575316.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:48:37.151Z,1422575317.151 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:48:37.183Z,1422575317.183 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:48:37.182Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:48:37.206Z,1422575317.206 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:48:37.184Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:48:37.208Z,1422575317.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:48:37.584Z,1422575317.584 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:48:37.613Z,1422575317.613 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:48:37.611Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:48:37.615Z,1422575317.615 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:48:37.614Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:48:37.618Z,1422575317.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:48:38.005Z,1422575318.005 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:48:38.020Z,1422575318.020 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:48:38.018Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:48:38.022Z,1422575318.022 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:48:38.021Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:48:38.024Z,1422575318.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:48:38.409Z,1422575318.409 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:48:38.443Z,1422575318.443 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:48:38.441Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:48:38.465Z,1422575318.465 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:48:38.464Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:48:38.468Z,1422575318.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:48:38.842Z,1422575318.842 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:48:38.875Z,1422575318.875 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:48:38.874Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:48:38.878Z,1422575318.878 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:48:38.876Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:48:38.880Z,1422575318.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:48:39.274Z,1422575319.274 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:48:39.313Z,1422575319.313 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:48:39.311Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:48:39.315Z,1422575319.315 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:48:39.314Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:48:39.318Z,1422575319.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:48:39.707Z,1422575319.707 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:48:39.723Z,1422575319.723 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:48:39.721Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:48:39.726Z,1422575319.726 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:48:39.724Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:48:39.728Z,1422575319.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:48:40.128Z,1422575320.128 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:48:40.188Z,1422575320.188 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:48:40.187Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:48:40.194Z,1422575320.194 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:48:40.189Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:48:40.197Z,1422575320.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:48:40.580Z,1422575320.580 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:48:40.597Z,1422575320.597 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:48:40.596Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:48:40.600Z,1422575320.600 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:48:40.598Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:48:40.602Z,1422575320.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:48:40.981Z,1422575320.981 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:48:40.996Z,1422575320.996 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:48:40.994Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:48:40.998Z,1422575320.998 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:48:40.997Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:48:41.001Z,1422575321.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:48:41.394Z,1422575321.394 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:48:41.435Z,1422575321.435 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:48:41.434Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:48:41.438Z,1422575321.438 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:48:41.436Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:48:41.440Z,1422575321.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:48:41.826Z,1422575321.826 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:48:41.890Z,1422575321.890 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:48:41.888Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:48:41.892Z,1422575321.892 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:48:41.891Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:48:41.894Z,1422575321.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:48:42.284Z,1422575322.284 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:48:42.330Z,1422575322.330 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:48:42.328Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:48:42.332Z,1422575322.332 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:48:42.331Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:48:42.335Z,1422575322.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:48:42.722Z,1422575322.722 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:48:42.737Z,1422575322.737 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:48:42.735Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:48:42.739Z,1422575322.739 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:48:42.737Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:48:42.741Z,1422575322.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:48:43.140Z,1422575323.140 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:48:43.208Z,1422575323.208 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:48:43.207Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:48:43.215Z,1422575323.215 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:48:43.209Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:48:43.217Z,1422575323.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:48:43.590Z,1422575323.590 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:48:43.607Z,1422575323.607 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:48:43.605Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:48:43.609Z,1422575323.609 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:48:43.608Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:48:43.612Z,1422575323.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:48:44.014Z,1422575324.014 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:48:44.041Z,1422575324.041 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:48:44.039Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:48:44.043Z,1422575324.043 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:48:44.042Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:48:44.045Z,1422575324.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:48:44.450Z,1422575324.450 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:48:44.496Z,1422575324.496 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:48:44.494Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:48:44.498Z,1422575324.498 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:48:44.497Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:48:44.500Z,1422575324.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:48:44.887Z,1422575324.887 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:48:44.920Z,1422575324.920 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:48:44.919Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:48:44.943Z,1422575324.943 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:48:44.942Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:48:44.945Z,1422575324.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:48:45.320Z,1422575325.320 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:48:45.353Z,1422575325.353 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:48:45.352Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:48:45.356Z,1422575325.356 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:48:45.355Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:48:45.358Z,1422575325.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:48:45.760Z,1422575325.760 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:48:45.790Z,1422575325.790 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:48:45.789Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:48:45.794Z,1422575325.794 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:48:45.792Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:48:45.796Z,1422575325.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:48:46.178Z,1422575326.178 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:48:46.210Z,1422575326.210 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:48:46.208Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:48:46.212Z,1422575326.212 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:48:46.211Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:48:46.215Z,1422575326.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:48:46.602Z,1422575326.602 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:48:46.619Z,1422575326.619 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:48:46.618Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:48:46.622Z,1422575326.622 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:48:46.621Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:48:46.636Z,1422575326.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:48:47.035Z,1422575327.035 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:48:47.050Z,1422575327.050 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:48:47.048Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:48:47.052Z,1422575327.052 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:48:47.051Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:48:47.054Z,1422575327.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:48:47.447Z,1422575327.447 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:48:47.480Z,1422575327.480 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:48:47.479Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:48:47.503Z,1422575327.503 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:48:47.481Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:48:47.505Z,1422575327.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:48:47.889Z,1422575327.889 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:48:47.925Z,1422575327.925 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:48:47.924Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:48:47.928Z,1422575327.928 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:48:47.926Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:48:47.930Z,1422575327.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:48:48.324Z,1422575328.324 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:48:48.353Z,1422575328.353 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:48:48.352Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:48:48.356Z,1422575328.356 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:48:48.354Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:48:48.358Z,1422575328.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:48:48.749Z,1422575328.749 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:48:48.765Z,1422575328.765 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:48:48.764Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:48:48.767Z,1422575328.767 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:48:48.766Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:48:48.770Z,1422575328.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:48:49.158Z,1422575329.158 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:48:49.206Z,1422575329.206 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:48:49.204Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:48:49.212Z,1422575329.212 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:48:49.207Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:48:49.215Z,1422575329.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:48:49.604Z,1422575329.604 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:48:49.621Z,1422575329.621 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:48:49.620Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:48:49.623Z,1422575329.623 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:48:49.622Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:48:49.626Z,1422575329.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:48:50.011Z,1422575330.011 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:48:50.026Z,1422575330.026 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:48:50.024Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:48:50.028Z,1422575330.028 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:48:50.027Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:48:50.031Z,1422575330.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:48:50.420Z,1422575330.420 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:48:50.465Z,1422575330.465 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:48:50.464Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:48:50.468Z,1422575330.468 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:48:50.466Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:48:50.470Z,1422575330.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:48:50.855Z,1422575330.855 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:48:50.882Z,1422575330.882 [BPC1](FAULT): Failed to receive battery data
2015-01-29T23:48:50.882Z,1422575330.882 [BPC1] Communications Fault, FailCount= 1
2015-01-29T23:48:50.882Z,1422575330.882 [BPC1](ERROR): Communications Fault
2015-01-29T23:48:50.891Z,1422575330.891 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:48:50.889Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:48:50.893Z,1422575330.893 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:48:50.892Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:48:50.923Z,1422575330.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:48:50.939Z,1422575330.939 [CBIT](ERROR): Communications Fault in component: BPC1
2015-01-29T23:48:51.289Z,1422575331.289 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:48:51.323Z,1422575331.323 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:48:51.322Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:48:51.326Z,1422575331.326 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:48:51.324Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:48:51.328Z,1422575331.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:48:51.722Z,1422575331.722 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:48:51.736Z,1422575331.736 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:48:51.735Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:48:51.738Z,1422575331.738 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:48:51.737Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:48:51.741Z,1422575331.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:48:52.146Z,1422575332.146 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:48:52.184Z,1422575332.184 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:48:52.182Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:48:52.186Z,1422575332.186 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:48:52.184Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:48:52.188Z,1422575332.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:48:52.228Z,1422575332.228 [CBIT](INFO): Clearing failed state for component BPC1
2015-01-29T23:48:52.228Z,1422575332.228 [BPC1] No Fault, FailCount= 1
2015-01-29T23:48:52.612Z,1422575332.612 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:48:52.684Z,1422575332.684 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:48:52.683Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:48:52.687Z,1422575332.687 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:48:52.686Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:48:52.689Z,1422575332.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:48:53.084Z,1422575333.084 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:48:53.142Z,1422575333.142 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:48:53.140Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:48:53.144Z,1422575333.144 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:48:53.143Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:48:53.147Z,1422575333.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:48:53.544Z,1422575333.544 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:48:53.577Z,1422575333.577 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:48:53.575Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:48:53.579Z,1422575333.579 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:48:53.578Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:48:53.581Z,1422575333.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:48:53.973Z,1422575333.973 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:48:54.024Z,1422575334.024 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:48:54.022Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:48:54.026Z,1422575334.026 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:48:54.025Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:48:54.029Z,1422575334.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:48:54.419Z,1422575334.419 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:48:54.451Z,1422575334.451 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:48:54.450Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:48:54.470Z,1422575334.470 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:48:54.469Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:48:54.477Z,1422575334.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:48:54.846Z,1422575334.846 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:48:54.876Z,1422575334.876 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:48:54.875Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:48:54.878Z,1422575334.878 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:48:54.877Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:48:54.881Z,1422575334.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:48:55.271Z,1422575335.271 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:48:55.303Z,1422575335.303 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:48:55.301Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:48:55.305Z,1422575335.305 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:48:55.304Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:48:55.328Z,1422575335.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:48:55.704Z,1422575335.704 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:48:55.730Z,1422575335.730 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:48:55.729Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:48:55.732Z,1422575335.732 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:48:55.731Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:48:55.735Z,1422575335.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:48:56.125Z,1422575336.125 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:48:56.139Z,1422575336.139 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:48:56.137Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:48:56.141Z,1422575336.141 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:48:56.140Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:48:56.143Z,1422575336.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:48:56.530Z,1422575336.530 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:48:56.579Z,1422575336.579 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:48:56.578Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:48:56.582Z,1422575336.582 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:48:56.580Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:48:56.584Z,1422575336.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:48:56.966Z,1422575336.966 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:48:56.999Z,1422575336.999 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:48:56.998Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:48:57.001Z,1422575337.001 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:48:56.000Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:48:57.004Z,1422575337.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:48:57.402Z,1422575337.402 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:48:57.439Z,1422575337.439 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:48:57.437Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:48:57.441Z,1422575337.441 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:48:57.440Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:48:57.443Z,1422575337.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:48:57.832Z,1422575337.832 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:48:57.846Z,1422575337.846 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:48:57.845Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:48:57.849Z,1422575337.849 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:48:57.847Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:48:57.851Z,1422575337.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:48:58.256Z,1422575338.256 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:48:58.319Z,1422575338.319 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:48:58.314Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:48:58.322Z,1422575338.322 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:48:58.320Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:48:58.328Z,1422575338.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:48:58.704Z,1422575338.704 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:48:58.721Z,1422575338.721 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:48:58.720Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:48:58.724Z,1422575338.724 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:48:58.722Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:48:58.726Z,1422575338.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:48:59.105Z,1422575339.105 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:48:59.121Z,1422575339.121 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:48:59.119Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:48:59.123Z,1422575339.123 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:48:59.122Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:48:59.126Z,1422575339.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:48:59.522Z,1422575339.522 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:48:59.560Z,1422575339.560 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:48:59.559Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:48:59.563Z,1422575339.563 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:48:59.561Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:48:59.565Z,1422575339.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:48:59.962Z,1422575339.962 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:49:00.008Z,1422575340.008 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:49:00.006Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:49:00.010Z,1422575340.010 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:49:00.008Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:49:00.012Z,1422575340.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:49:00.407Z,1422575340.407 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:49:00.455Z,1422575340.455 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:49:00.454Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:49:00.457Z,1422575340.457 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:49:00.456Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:49:00.460Z,1422575340.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:49:00.860Z,1422575340.860 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:49:00.875Z,1422575340.875 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:49:00.873Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:49:00.877Z,1422575340.877 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:49:00.876Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:49:00.879Z,1422575340.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:49:01.284Z,1422575341.284 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:49:01.324Z,1422575341.324 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:49:01.322Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:49:01.326Z,1422575341.326 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:49:01.325Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:49:01.329Z,1422575341.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:49:01.717Z,1422575341.717 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:49:01.735Z,1422575341.735 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:49:01.733Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:49:01.737Z,1422575341.737 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:49:01.736Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:49:01.739Z,1422575341.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:49:02.130Z,1422575342.130 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:49:02.161Z,1422575342.161 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:49:02.143Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:49:02.163Z,1422575342.163 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:49:02.162Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:49:02.170Z,1422575342.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:49:02.552Z,1422575342.552 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:49:02.584Z,1422575342.584 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:49:02.582Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:49:02.586Z,1422575342.586 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:49:02.585Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:49:02.589Z,1422575342.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:49:02.987Z,1422575342.987 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:49:03.025Z,1422575343.025 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:49:03.023Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:49:03.027Z,1422575343.027 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:49:03.026Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:49:03.029Z,1422575343.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:49:03.424Z,1422575343.424 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:49:03.467Z,1422575343.467 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:49:03.465Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:49:03.469Z,1422575343.469 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:49:03.468Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:49:03.471Z,1422575343.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:49:03.873Z,1422575343.873 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:49:03.928Z,1422575343.928 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:49:03.927Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:49:03.931Z,1422575343.931 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:49:03.929Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:49:03.933Z,1422575343.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:49:04.310Z,1422575344.310 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:49:04.342Z,1422575344.342 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:49:04.341Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:49:04.345Z,1422575344.345 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:49:04.343Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:49:04.347Z,1422575344.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:49:04.750Z,1422575344.750 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:49:04.775Z,1422575344.775 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:49:04.773Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:49:04.777Z,1422575344.777 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:49:04.776Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:49:04.780Z,1422575344.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:49:05.170Z,1422575345.170 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:49:05.199Z,1422575345.199 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:49:05.197Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:49:05.222Z,1422575345.222 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:49:05.200Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:49:05.224Z,1422575345.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:49:05.608Z,1422575345.608 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:49:05.677Z,1422575345.677 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:49:05.676Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:49:05.680Z,1422575345.680 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:49:05.679Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:49:05.682Z,1422575345.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:49:06.080Z,1422575346.080 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:49:06.123Z,1422575346.123 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:49:06.121Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:49:06.125Z,1422575346.125 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:49:06.124Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:49:06.128Z,1422575346.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:49:06.532Z,1422575346.532 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:49:06.583Z,1422575346.583 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:49:06.582Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:49:06.585Z,1422575346.585 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:49:06.584Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:49:06.588Z,1422575346.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:49:06.977Z,1422575346.977 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:49:07.031Z,1422575347.031 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:49:07.030Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:49:07.034Z,1422575347.034 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:49:07.033Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:49:07.036Z,1422575347.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:49:07.430Z,1422575347.430 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:49:07.486Z,1422575347.486 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:49:07.485Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:49:07.493Z,1422575347.493 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:49:07.487Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:49:07.495Z,1422575347.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:49:07.871Z,1422575347.871 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:49:07.887Z,1422575347.887 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:49:07.885Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:49:07.889Z,1422575347.889 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:49:07.888Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:49:07.891Z,1422575347.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:49:08.284Z,1422575348.284 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:49:08.327Z,1422575348.327 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:49:08.326Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:49:08.330Z,1422575348.330 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:49:08.328Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:49:08.332Z,1422575348.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:49:08.736Z,1422575348.736 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:49:08.781Z,1422575348.781 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:49:08.780Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:49:08.784Z,1422575348.784 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:49:08.783Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:49:08.786Z,1422575348.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:49:09.185Z,1422575349.185 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:49:09.226Z,1422575349.226 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:49:09.225Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:49:09.228Z,1422575349.228 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:49:09.227Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:49:09.231Z,1422575349.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:49:09.618Z,1422575349.618 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:49:09.633Z,1422575349.633 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:49:09.631Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:49:09.635Z,1422575349.635 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:49:09.634Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:49:09.638Z,1422575349.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:49:10.034Z,1422575350.034 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:49:10.049Z,1422575350.049 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:49:10.047Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:49:10.051Z,1422575350.051 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:49:10.050Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:49:10.053Z,1422575350.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:49:10.439Z,1422575350.439 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:49:10.517Z,1422575350.517 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:49:10.515Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:49:10.519Z,1422575350.519 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:49:10.518Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:49:10.521Z,1422575350.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:49:10.921Z,1422575350.921 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:49:10.937Z,1422575350.937 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:49:10.935Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:49:10.939Z,1422575350.939 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:49:10.938Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:49:10.941Z,1422575350.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:49:11.328Z,1422575351.328 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:49:11.378Z,1422575351.378 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:49:11.377Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:49:11.381Z,1422575351.381 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:49:11.379Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:49:11.383Z,1422575351.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:49:11.770Z,1422575351.770 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:49:11.797Z,1422575351.797 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:49:11.795Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:49:11.799Z,1422575351.799 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:49:11.798Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:49:11.801Z,1422575351.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:49:12.190Z,1422575352.190 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:49:12.232Z,1422575352.232 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:49:12.231Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:49:12.235Z,1422575352.235 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:49:12.233Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:49:12.237Z,1422575352.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:49:12.630Z,1422575352.630 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:49:12.645Z,1422575352.645 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:49:12.643Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:49:12.647Z,1422575352.647 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:49:12.646Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:49:12.649Z,1422575352.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:49:13.043Z,1422575353.043 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:49:13.057Z,1422575353.057 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:49:13.055Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:49:13.059Z,1422575353.059 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:49:13.058Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:49:13.061Z,1422575353.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:49:13.443Z,1422575353.443 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:49:13.481Z,1422575353.481 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:49:13.480Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:49:13.484Z,1422575353.484 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:49:13.483Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:49:13.486Z,1422575353.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:49:13.873Z,1422575353.873 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:49:13.904Z,1422575353.904 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:49:13.902Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:49:13.906Z,1422575353.906 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:49:13.905Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:49:13.909Z,1422575353.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:49:14.305Z,1422575354.305 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:49:14.350Z,1422575354.350 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:49:14.349Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:49:14.352Z,1422575354.352 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:49:14.351Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:49:14.355Z,1422575354.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:49:14.750Z,1422575354.750 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:49:14.795Z,1422575354.795 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:49:14.793Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:49:14.797Z,1422575354.797 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:49:14.796Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:49:14.800Z,1422575354.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:49:15.194Z,1422575355.194 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:49:15.236Z,1422575355.236 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:49:15.235Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:49:15.239Z,1422575355.239 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:49:15.237Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:49:15.241Z,1422575355.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:49:15.647Z,1422575355.647 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:49:15.661Z,1422575355.661 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:49:15.660Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:49:15.664Z,1422575355.664 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:49:15.662Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:49:15.666Z,1422575355.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:49:16.060Z,1422575356.060 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:49:16.087Z,1422575356.087 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:49:16.085Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:49:16.089Z,1422575356.089 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:49:16.088Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:49:16.092Z,1422575356.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:49:16.493Z,1422575356.493 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:49:16.508Z,1422575356.508 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:49:16.507Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:49:16.511Z,1422575356.511 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:49:16.509Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:49:16.513Z,1422575356.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:49:16.917Z,1422575356.917 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:49:16.956Z,1422575356.956 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:49:16.955Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:49:16.959Z,1422575356.959 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:49:16.957Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:49:16.961Z,1422575356.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:49:17.358Z,1422575357.358 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:49:17.403Z,1422575357.403 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:49:17.402Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:49:17.406Z,1422575357.406 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:49:17.404Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:49:17.408Z,1422575357.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:49:17.802Z,1422575357.802 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:49:17.845Z,1422575357.845 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:49:17.844Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:49:17.848Z,1422575357.848 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:49:17.846Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:49:17.850Z,1422575357.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:49:18.251Z,1422575358.251 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:49:18.321Z,1422575358.321 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:49:18.320Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:49:18.323Z,1422575358.323 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:49:18.322Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:49:18.342Z,1422575358.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:49:18.708Z,1422575358.708 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:49:18.729Z,1422575358.729 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:49:18.728Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:49:18.747Z,1422575358.747 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:49:18.746Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:49:18.750Z,1422575358.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:49:19.109Z,1422575359.109 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:49:19.174Z,1422575359.174 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:49:19.172Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:49:19.176Z,1422575359.176 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:49:19.175Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:49:19.178Z,1422575359.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:49:19.557Z,1422575359.557 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:49:19.573Z,1422575359.573 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:49:19.571Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:49:19.575Z,1422575359.575 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:49:19.574Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:49:19.577Z,1422575359.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:49:19.970Z,1422575359.970 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:49:20.032Z,1422575360.032 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:49:20.030Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:49:20.038Z,1422575360.038 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:49:20.037Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:49:20.045Z,1422575360.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:49:20.422Z,1422575360.422 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:49:20.471Z,1422575360.471 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:49:20.470Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:49:20.474Z,1422575360.474 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:49:20.472Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:49:20.476Z,1422575360.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:49:20.859Z,1422575360.859 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:49:20.919Z,1422575360.919 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:49:20.917Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:49:20.921Z,1422575360.921 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:49:20.920Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:49:20.923Z,1422575360.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:49:21.316Z,1422575361.316 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:49:21.390Z,1422575361.390 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:49:21.388Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:49:21.392Z,1422575361.392 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:49:21.391Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:49:21.395Z,1422575361.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:49:21.780Z,1422575361.780 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:49:21.795Z,1422575361.795 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:49:21.794Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:49:21.798Z,1422575361.798 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:49:21.796Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:49:21.800Z,1422575361.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:49:22.185Z,1422575362.185 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:49:22.199Z,1422575362.199 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:49:22.198Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:49:22.201Z,1422575362.201 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:49:22.200Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:49:22.204Z,1422575362.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:49:22.598Z,1422575362.598 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:49:22.632Z,1422575362.632 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:49:22.630Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:49:22.634Z,1422575362.634 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:49:22.633Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:49:22.637Z,1422575362.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:49:23.031Z,1422575363.031 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:49:23.082Z,1422575363.082 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:49:23.080Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:49:23.084Z,1422575363.084 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:49:23.083Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:49:23.091Z,1422575363.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:49:23.459Z,1422575363.459 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:49:23.487Z,1422575363.487 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:49:23.486Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:49:23.490Z,1422575363.490 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:49:23.488Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:49:23.492Z,1422575363.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:49:23.880Z,1422575363.880 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:49:23.913Z,1422575363.913 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:49:23.912Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:49:23.936Z,1422575363.936 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:49:23.935Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:49:23.939Z,1422575363.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:49:24.322Z,1422575364.322 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:49:24.354Z,1422575364.354 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:49:24.352Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:49:24.356Z,1422575364.356 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:49:24.355Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:49:24.358Z,1422575364.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:49:24.761Z,1422575364.761 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:49:24.791Z,1422575364.791 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:49:24.790Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:49:24.794Z,1422575364.794 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:49:24.792Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:49:24.796Z,1422575364.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:49:25.178Z,1422575365.178 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:49:25.193Z,1422575365.193 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:49:25.192Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:49:25.196Z,1422575365.196 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:49:25.194Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:49:25.198Z,1422575365.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:49:25.586Z,1422575365.586 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:49:25.602Z,1422575365.602 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:49:25.600Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:49:25.604Z,1422575365.604 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:49:25.603Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:49:25.606Z,1422575365.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:49:26.007Z,1422575366.007 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:49:26.083Z,1422575366.083 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:49:26.072Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:49:26.085Z,1422575366.085 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:49:26.084Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:49:26.088Z,1422575366.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:49:26.481Z,1422575366.481 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:49:26.513Z,1422575366.513 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:49:26.512Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:49:26.516Z,1422575366.516 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:49:26.515Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:49:26.518Z,1422575366.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:49:26.904Z,1422575366.904 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:49:26.947Z,1422575366.947 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:49:26.945Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:49:26.949Z,1422575366.949 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:49:26.948Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:49:26.952Z,1422575366.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:49:27.353Z,1422575367.353 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:49:27.394Z,1422575367.394 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:49:27.393Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:49:27.397Z,1422575367.397 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:49:27.396Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:49:27.399Z,1422575367.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:49:27.784Z,1422575367.784 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:49:27.804Z,1422575367.804 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:49:27.802Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:49:27.806Z,1422575367.806 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:49:27.805Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:49:27.809Z,1422575367.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:49:28.194Z,1422575368.194 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:49:28.209Z,1422575368.209 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:49:28.207Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:49:28.211Z,1422575368.211 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:49:28.210Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:49:28.214Z,1422575368.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:49:28.607Z,1422575368.607 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:49:28.622Z,1422575368.622 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:49:28.621Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:49:28.625Z,1422575368.625 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:49:28.623Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:49:28.627Z,1422575368.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:49:29.016Z,1422575369.016 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:49:29.073Z,1422575369.073 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:49:29.072Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:49:29.080Z,1422575369.080 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:49:29.078Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:49:29.086Z,1422575369.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:49:29.480Z,1422575369.480 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:49:29.510Z,1422575369.510 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:49:29.509Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:49:29.513Z,1422575369.513 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:49:29.512Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:49:29.515Z,1422575369.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:49:29.905Z,1422575369.905 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:49:29.933Z,1422575369.933 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:49:29.931Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:49:29.935Z,1422575369.935 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:49:29.934Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:49:29.938Z,1422575369.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:49:30.348Z,1422575370.348 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:49:30.379Z,1422575370.379 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:49:30.377Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:49:30.381Z,1422575370.381 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:49:30.380Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:49:30.384Z,1422575370.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:49:30.782Z,1422575370.782 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:49:30.812Z,1422575370.812 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:49:30.811Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:49:30.815Z,1422575370.815 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:49:30.813Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:49:30.817Z,1422575370.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:49:31.195Z,1422575371.195 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:49:31.210Z,1422575371.210 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:49:31.209Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:49:31.213Z,1422575371.213 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:49:31.211Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:49:31.215Z,1422575371.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:49:31.603Z,1422575371.603 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:49:31.619Z,1422575371.619 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:49:31.617Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:49:31.621Z,1422575371.621 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:49:31.620Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:49:31.623Z,1422575371.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:49:32.017Z,1422575372.017 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:49:32.069Z,1422575372.069 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:49:32.067Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:49:32.075Z,1422575372.075 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:49:32.070Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:49:32.077Z,1422575372.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:49:32.453Z,1422575372.453 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:49:32.486Z,1422575372.486 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:49:32.485Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:49:32.488Z,1422575372.488 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:49:32.487Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:49:32.491Z,1422575372.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:49:32.894Z,1422575372.894 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:49:32.932Z,1422575372.932 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:49:32.930Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:49:32.934Z,1422575372.934 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:49:32.933Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:49:32.937Z,1422575372.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:49:33.334Z,1422575373.334 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:49:33.424Z,1422575373.424 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:49:33.422Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:49:33.426Z,1422575373.426 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:49:33.425Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:49:33.429Z,1422575373.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:49:33.815Z,1422575373.815 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:49:33.830Z,1422575373.830 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:49:33.828Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:49:33.832Z,1422575373.832 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:49:33.831Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:49:33.834Z,1422575373.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:49:34.228Z,1422575374.228 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:49:34.243Z,1422575374.243 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:49:34.241Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:49:34.245Z,1422575374.245 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:49:34.244Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:49:34.247Z,1422575374.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:49:34.640Z,1422575374.640 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:49:34.673Z,1422575374.673 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:49:34.672Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:49:34.676Z,1422575374.676 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:49:34.674Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:49:34.678Z,1422575374.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:49:35.061Z,1422575375.061 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:49:35.092Z,1422575375.092 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:49:35.090Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:49:35.094Z,1422575375.094 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:49:35.093Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:49:35.096Z,1422575375.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:49:35.502Z,1422575375.502 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:49:35.531Z,1422575375.531 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:49:35.529Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:49:35.533Z,1422575375.533 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:49:35.532Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:49:35.536Z,1422575375.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:49:35.922Z,1422575375.922 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:49:35.956Z,1422575375.956 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:49:35.954Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:49:35.979Z,1422575375.979 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:49:35.978Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:49:35.982Z,1422575375.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:49:36.364Z,1422575376.364 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:49:36.384Z,1422575376.384 [BPC1](FAULT): Failed to receive battery data
2015-01-29T23:49:36.384Z,1422575376.384 [BPC1] Communications Fault, FailCount= 1
2015-01-29T23:49:36.384Z,1422575376.384 [BPC1](ERROR): Communications Fault
2015-01-29T23:49:36.393Z,1422575376.393 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:49:36.392Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:49:36.396Z,1422575376.396 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:49:36.395Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:49:36.399Z,1422575376.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:49:36.440Z,1422575376.440 [CBIT](ERROR): Communications Fault in component: BPC1
2015-01-29T23:49:36.788Z,1422575376.788 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:49:36.830Z,1422575376.830 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:49:36.809Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:49:36.832Z,1422575376.832 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:49:36.831Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:49:36.835Z,1422575376.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:49:37.201Z,1422575377.201 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:49:37.228Z,1422575377.228 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:49:37.226Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:49:37.230Z,1422575377.230 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:49:37.229Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:49:37.232Z,1422575377.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:49:37.621Z,1422575377.621 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:49:37.637Z,1422575377.637 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:49:37.635Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:49:37.639Z,1422575377.639 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:49:37.638Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:49:37.641Z,1422575377.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:49:37.658Z,1422575377.658 [CBIT](INFO): Clearing failed state for component BPC1
2015-01-29T23:49:37.658Z,1422575377.658 [BPC1] No Fault, FailCount= 1
2015-01-29T23:49:38.046Z,1422575378.046 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:49:38.177Z,1422575378.177 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:49:38.176Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:49:38.180Z,1422575378.180 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:49:38.178Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:49:38.182Z,1422575378.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:49:38.582Z,1422575378.582 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:49:38.652Z,1422575378.652 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:49:38.651Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:49:38.655Z,1422575378.655 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:49:38.654Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:49:38.657Z,1422575378.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:49:39.055Z,1422575379.055 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:49:39.100Z,1422575379.100 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:49:39.099Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:49:39.103Z,1422575379.103 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:49:39.102Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:49:39.105Z,1422575379.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:49:39.500Z,1422575379.500 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:49:39.541Z,1422575379.541 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:49:39.540Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:49:39.544Z,1422575379.544 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:49:39.543Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:49:39.546Z,1422575379.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:49:39.934Z,1422575379.934 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:49:39.949Z,1422575379.949 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:49:39.947Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:49:39.951Z,1422575379.951 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:49:39.950Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:49:39.954Z,1422575379.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:49:40.349Z,1422575380.349 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:49:40.365Z,1422575380.365 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:49:40.363Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:49:40.367Z,1422575380.367 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:49:40.366Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:49:40.369Z,1422575380.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:49:40.758Z,1422575380.758 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:49:40.772Z,1422575380.772 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:49:40.770Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:49:40.774Z,1422575380.774 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:49:40.773Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:49:40.799Z,1422575380.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:49:41.166Z,1422575381.166 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:49:41.224Z,1422575381.224 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:49:41.222Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:49:41.247Z,1422575381.247 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:49:41.246Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:49:41.253Z,1422575381.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:49:41.636Z,1422575381.636 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:49:41.672Z,1422575381.672 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:49:41.671Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:49:41.675Z,1422575381.675 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:49:41.674Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:49:41.677Z,1422575381.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:49:42.076Z,1422575382.076 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:49:42.105Z,1422575382.105 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:49:42.103Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:49:42.107Z,1422575382.107 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:49:42.106Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:49:42.109Z,1422575382.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:49:42.500Z,1422575382.500 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:49:42.515Z,1422575382.515 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:49:42.514Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:49:42.518Z,1422575382.518 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:49:42.516Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:49:42.520Z,1422575382.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:49:42.917Z,1422575382.917 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:49:42.932Z,1422575382.932 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:49:42.930Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:49:42.934Z,1422575382.934 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:49:42.933Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:49:42.952Z,1422575382.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:49:43.318Z,1422575383.318 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:49:43.333Z,1422575383.333 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:49:43.331Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:49:43.335Z,1422575383.335 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:49:43.334Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:49:43.337Z,1422575383.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:49:43.722Z,1422575383.722 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:49:43.756Z,1422575383.756 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:49:43.736Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:49:43.759Z,1422575383.759 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:49:43.757Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:49:43.761Z,1422575383.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:49:44.150Z,1422575384.150 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:49:44.188Z,1422575384.188 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:49:44.187Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:49:44.207Z,1422575384.207 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:49:44.205Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:49:44.209Z,1422575384.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:49:44.597Z,1422575384.597 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:49:44.677Z,1422575384.677 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:49:44.676Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:49:44.679Z,1422575384.679 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:49:44.678Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:49:44.690Z,1422575384.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:49:45.053Z,1422575385.053 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:49:45.086Z,1422575385.086 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:49:45.084Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:49:45.088Z,1422575385.088 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:49:45.087Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:49:45.090Z,1422575385.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:49:45.477Z,1422575385.477 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:49:45.492Z,1422575385.492 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:49:45.490Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:49:45.494Z,1422575385.494 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:49:45.493Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:49:45.496Z,1422575385.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:49:45.878Z,1422575385.878 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:49:45.892Z,1422575385.892 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:49:45.891Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:49:45.894Z,1422575385.894 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:49:45.893Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:49:45.897Z,1422575385.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:49:46.286Z,1422575386.286 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:49:46.301Z,1422575386.301 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:49:46.300Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:49:46.304Z,1422575386.304 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:49:46.302Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:49:46.306Z,1422575386.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:49:46.687Z,1422575386.687 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:49:46.702Z,1422575386.702 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:49:46.701Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:49:46.705Z,1422575386.705 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:49:46.703Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:49:46.708Z,1422575386.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:49:47.100Z,1422575387.100 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:49:47.114Z,1422575387.114 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:49:47.113Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:49:47.117Z,1422575387.117 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:49:47.115Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:49:47.135Z,1422575387.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:49:47.504Z,1422575387.504 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:49:47.550Z,1422575387.550 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:49:47.548Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:49:47.552Z,1422575387.552 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:49:47.551Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:49:47.554Z,1422575387.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:49:47.949Z,1422575387.949 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:49:48.026Z,1422575388.026 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:49:48.025Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:49:48.029Z,1422575388.029 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:49:48.028Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:49:48.031Z,1422575388.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:49:48.418Z,1422575388.418 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:49:48.463Z,1422575388.463 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:49:48.462Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:49:48.466Z,1422575388.466 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:49:48.464Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:49:48.468Z,1422575388.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:49:48.854Z,1422575388.854 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:49:48.870Z,1422575388.870 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:49:48.868Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:49:48.872Z,1422575388.872 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:49:48.871Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:49:48.874Z,1422575388.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:49:49.267Z,1422575389.267 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:49:49.282Z,1422575389.282 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:49:49.280Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:49:49.284Z,1422575389.284 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:49:49.283Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:49:49.286Z,1422575389.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:49:49.684Z,1422575389.684 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:49:49.713Z,1422575389.713 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:49:49.712Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:49:49.716Z,1422575389.716 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:49:49.715Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:49:49.718Z,1422575389.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:49:50.105Z,1422575390.105 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:49:50.120Z,1422575390.120 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:49:50.118Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:49:50.122Z,1422575390.122 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:49:50.121Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:49:50.124Z,1422575390.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:49:50.517Z,1422575390.517 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:49:50.591Z,1422575390.591 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:49:50.590Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:49:50.594Z,1422575390.594 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:49:50.592Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:49:50.612Z,1422575390.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:49:50.982Z,1422575390.982 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:49:51.077Z,1422575391.077 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:49:51.075Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:49:51.079Z,1422575391.079 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:49:51.078Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:49:51.082Z,1422575391.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:49:51.477Z,1422575391.477 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:49:51.526Z,1422575391.526 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:49:51.524Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:49:51.528Z,1422575391.528 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:49:51.527Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:49:51.530Z,1422575391.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:49:51.919Z,1422575391.919 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:49:51.934Z,1422575391.934 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:49:51.932Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:49:51.936Z,1422575391.936 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:49:51.935Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:49:51.939Z,1422575391.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:49:52.324Z,1422575392.324 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:49:52.377Z,1422575392.377 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:49:52.376Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:49:52.380Z,1422575392.380 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:49:52.378Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:49:52.382Z,1422575392.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:49:52.769Z,1422575392.769 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:49:52.784Z,1422575392.784 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:49:52.782Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:49:52.786Z,1422575392.786 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:49:52.784Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:49:52.788Z,1422575392.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:49:53.181Z,1422575393.181 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:49:53.247Z,1422575393.247 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:49:53.246Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:49:53.250Z,1422575393.250 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:49:53.248Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:49:53.252Z,1422575393.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:49:53.646Z,1422575393.646 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:49:53.701Z,1422575393.701 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:49:53.699Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:49:53.703Z,1422575393.703 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:49:53.702Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:49:53.721Z,1422575393.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:49:54.098Z,1422575394.098 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:49:54.148Z,1422575394.148 [BPC1](DEBUG): Received data from all battery sticks
2015-01-29T23:49:54.180Z,1422575394.180 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:49:54.178Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:49:54.187Z,1422575394.187 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:49:54.181Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:49:54.193Z,1422575394.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:49:54.572Z,1422575394.572 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:49:54.589Z,1422575394.589 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:49:54.588Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:49:54.592Z,1422575394.592 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:49:54.591Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:49:54.595Z,1422575394.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:49:54.988Z,1422575394.988 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:49:55.003Z,1422575395.003 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:49:55.002Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:49:55.005Z,1422575395.005 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:49:55.004Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:49:55.009Z,1422575395.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:49:55.397Z,1422575395.397 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:49:55.433Z,1422575395.433 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:49:55.432Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:49:55.436Z,1422575395.436 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:49:55.434Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:49:55.438Z,1422575395.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:49:55.819Z,1422575395.819 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:49:55.834Z,1422575395.834 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:49:55.833Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:49:55.837Z,1422575395.837 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:49:55.835Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:49:55.839Z,1422575395.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:49:56.238Z,1422575396.238 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:49:56.280Z,1422575396.280 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:49:56.278Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:49:56.282Z,1422575396.282 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:49:56.281Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:49:56.284Z,1422575396.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:49:56.671Z,1422575396.671 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:49:56.704Z,1422575396.704 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:49:56.702Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:49:56.706Z,1422575396.706 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:49:56.705Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:49:56.708Z,1422575396.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:49:57.109Z,1422575397.109 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:49:57.164Z,1422575397.164 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:49:57.163Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:49:57.183Z,1422575397.183 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:49:57.182Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:49:57.185Z,1422575397.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:49:57.556Z,1422575397.556 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:49:57.589Z,1422575397.589 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:49:57.588Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:49:57.591Z,1422575397.591 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:49:57.590Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:49:57.594Z,1422575397.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:49:57.963Z,1422575397.963 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:49:57.990Z,1422575397.990 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:49:57.989Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:49:57.997Z,1422575397.997 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:49:57.995Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:49:58.003Z,1422575398.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:49:58.369Z,1422575398.369 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:49:58.395Z,1422575398.395 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:49:58.394Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:49:58.398Z,1422575398.398 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:49:58.396Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:49:58.400Z,1422575398.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:49:58.786Z,1422575398.786 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:49:58.800Z,1422575398.800 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:49:58.799Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:49:58.802Z,1422575398.802 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:49:58.801Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:49:58.805Z,1422575398.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:49:59.185Z,1422575399.185 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:49:59.216Z,1422575399.216 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:49:59.214Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:49:59.218Z,1422575399.218 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:49:59.217Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:49:59.220Z,1422575399.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:49:59.623Z,1422575399.623 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:49:59.651Z,1422575399.651 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:49:59.650Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:49:59.654Z,1422575399.654 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:49:59.652Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:49:59.656Z,1422575399.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:50:00.056Z,1422575400.056 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:50:00.104Z,1422575400.104 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:50:00.103Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:50:00.106Z,1422575400.106 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:50:00.105Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:50:00.120Z,1422575400.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:50:00.491Z,1422575400.491 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:50:00.523Z,1422575400.523 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:50:00.521Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:50:00.525Z,1422575400.525 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:50:00.524Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:50:00.528Z,1422575400.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:50:00.933Z,1422575400.933 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:50:00.959Z,1422575400.959 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:50:00.958Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:50:00.962Z,1422575400.962 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:50:00.960Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:50:00.964Z,1422575400.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:50:01.354Z,1422575401.354 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:50:01.369Z,1422575401.369 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:50:01.367Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:50:01.371Z,1422575401.371 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:50:01.370Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:50:01.374Z,1422575401.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:50:01.770Z,1422575401.770 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:50:01.785Z,1422575401.785 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:50:01.784Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:50:01.788Z,1422575401.788 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:50:01.786Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:50:01.802Z,1422575401.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:50:02.187Z,1422575402.187 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:50:02.225Z,1422575402.225 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:50:02.224Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:50:02.228Z,1422575402.228 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:50:02.226Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:50:02.230Z,1422575402.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:50:02.616Z,1422575402.616 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:50:02.643Z,1422575402.643 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:50:02.642Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:50:02.646Z,1422575402.646 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:50:02.644Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:50:02.668Z,1422575402.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:50:03.036Z,1422575403.036 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:50:03.074Z,1422575403.074 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:50:03.073Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:50:03.077Z,1422575403.077 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:50:03.076Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:50:03.080Z,1422575403.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:50:03.473Z,1422575403.473 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:50:03.525Z,1422575403.525 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:50:03.524Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:50:03.531Z,1422575403.531 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:50:03.526Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:50:03.534Z,1422575403.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:50:03.902Z,1422575403.902 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:50:03.929Z,1422575403.929 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:50:03.927Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:50:03.931Z,1422575403.931 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:50:03.930Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:50:03.933Z,1422575403.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:50:04.318Z,1422575404.318 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:50:04.335Z,1422575404.335 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:50:04.334Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:50:04.338Z,1422575404.338 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:50:04.336Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:50:04.340Z,1422575404.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:50:04.743Z,1422575404.743 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:50:04.773Z,1422575404.773 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:50:04.756Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:50:04.776Z,1422575404.776 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:50:04.774Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:50:04.782Z,1422575404.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:50:05.165Z,1422575405.165 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:50:05.197Z,1422575405.197 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:50:05.195Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:50:05.199Z,1422575405.199 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:50:05.198Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:50:05.201Z,1422575405.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:50:05.592Z,1422575405.592 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:50:05.678Z,1422575405.678 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:50:05.677Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:50:05.685Z,1422575405.685 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:50:05.684Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:50:05.691Z,1422575405.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:50:06.057Z,1422575406.057 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:50:06.119Z,1422575406.119 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:50:06.118Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:50:06.138Z,1422575406.138 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:50:06.136Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:50:06.144Z,1422575406.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:50:06.514Z,1422575406.514 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:50:06.557Z,1422575406.557 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:50:06.556Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:50:06.560Z,1422575406.560 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:50:06.558Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:50:06.562Z,1422575406.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:50:06.970Z,1422575406.970 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:50:06.999Z,1422575406.999 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:50:06.998Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:50:07.002Z,1422575407.002 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:50:07.000Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:50:07.004Z,1422575407.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:50:07.395Z,1422575407.395 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:50:07.456Z,1422575407.456 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:50:07.455Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:50:07.459Z,1422575407.459 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:50:07.458Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:50:07.461Z,1422575407.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:50:07.848Z,1422575407.848 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:50:07.862Z,1422575407.862 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:50:07.860Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:50:07.864Z,1422575407.864 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:50:07.863Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:50:07.866Z,1422575407.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:50:08.260Z,1422575408.260 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:50:08.343Z,1422575408.343 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:50:08.342Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:50:08.346Z,1422575408.346 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:50:08.344Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:50:08.348Z,1422575408.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:50:08.746Z,1422575408.746 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:50:08.822Z,1422575408.822 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:50:08.821Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:50:08.825Z,1422575408.825 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:50:08.823Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:50:08.827Z,1422575408.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:50:09.218Z,1422575409.218 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:50:09.256Z,1422575409.256 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:50:09.254Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:50:09.258Z,1422575409.258 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:50:09.257Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:50:09.261Z,1422575409.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:50:09.655Z,1422575409.655 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:50:09.712Z,1422575409.712 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:50:09.711Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:50:09.715Z,1422575409.715 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:50:09.713Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:50:09.717Z,1422575409.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:50:10.083Z,1422575410.083 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:50:10.107Z,1422575410.107 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:50:10.106Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:50:10.110Z,1422575410.110 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:50:10.108Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:50:10.112Z,1422575410.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:50:10.512Z,1422575410.512 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:50:10.528Z,1422575410.528 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:50:10.526Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:50:10.530Z,1422575410.530 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:50:10.529Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:50:10.532Z,1422575410.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:50:10.929Z,1422575410.929 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:50:10.955Z,1422575410.955 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:50:10.954Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:50:10.958Z,1422575410.958 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:50:10.956Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:50:10.960Z,1422575410.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:50:11.349Z,1422575411.349 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:50:11.382Z,1422575411.382 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:50:11.381Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:50:11.404Z,1422575411.404 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:50:11.383Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:50:11.406Z,1422575411.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:50:11.795Z,1422575411.795 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:50:11.822Z,1422575411.822 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:50:11.820Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:50:11.824Z,1422575411.824 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:50:11.823Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:50:11.826Z,1422575411.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:50:12.209Z,1422575412.209 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:50:12.256Z,1422575412.256 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:50:12.255Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:50:12.259Z,1422575412.259 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:50:12.257Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:50:12.263Z,1422575412.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:50:12.639Z,1422575412.639 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:50:12.679Z,1422575412.679 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:50:12.677Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:50:12.681Z,1422575412.681 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:50:12.680Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:50:12.683Z,1422575412.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:50:13.092Z,1422575413.092 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:50:13.119Z,1422575413.119 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:50:13.118Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:50:13.121Z,1422575413.121 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:50:13.120Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:50:13.124Z,1422575413.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:50:13.508Z,1422575413.508 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:50:13.524Z,1422575413.524 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:50:13.522Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:50:13.526Z,1422575413.526 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:50:13.525Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:50:13.529Z,1422575413.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:50:13.536Z,1422575413.536 [Default:CheckIn:Read_GPS](INFO): Timed out from 2015-01-29T23:45:13.5Z
2015-01-29T23:50:13.536Z,1422575413.536 [Default:CheckIn:Read_GPS] Stopped
2015-01-29T23:50:13.536Z,1422575413.536 [Default:CheckIn:Read_Iridium] Running Loop=1
2015-01-29T23:50:13.925Z,1422575413.925 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:50:13.940Z,1422575413.940 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:50:13.938Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:50:13.942Z,1422575413.942 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:50:13.941Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:50:13.945Z,1422575413.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:50:13.968Z,1422575413.968 [Default:CheckIn:Read_Iridium](DEBUG): Initialize ReadDataComponent to sense platform_communications
2015-01-29T23:50:14.586Z,1422575414.586 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:50:14.628Z,1422575414.628 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:50:14.627Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:50:14.630Z,1422575414.630 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:50:14.629Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:50:14.633Z,1422575414.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:50:15.015Z,1422575415.015 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:50:15.049Z,1422575415.049 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:50:15.047Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:50:15.051Z,1422575415.051 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:50:15.050Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:50:15.054Z,1422575415.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:50:15.439Z,1422575415.439 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:50:15.482Z,1422575415.482 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:50:15.481Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:50:15.485Z,1422575415.485 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:50:15.483Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:50:15.487Z,1422575415.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:50:15.896Z,1422575415.896 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:50:15.954Z,1422575415.954 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:50:15.952Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:50:15.956Z,1422575415.956 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:50:15.955Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:50:15.958Z,1422575415.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:50:16.345Z,1422575416.345 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:50:16.362Z,1422575416.362 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:50:16.361Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:50:16.365Z,1422575416.365 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:50:16.363Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:50:16.367Z,1422575416.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:50:16.753Z,1422575416.753 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:50:16.799Z,1422575416.799 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:50:16.798Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:50:16.801Z,1422575416.801 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:50:16.800Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:50:16.804Z,1422575416.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:50:17.202Z,1422575417.202 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:50:17.734Z,1422575417.734 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:50:17.732Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:50:17.736Z,1422575417.736 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:50:17.735Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:50:17.739Z,1422575417.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:50:18.136Z,1422575418.136 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:50:18.193Z,1422575418.193 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:50:18.192Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:50:18.195Z,1422575418.195 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:50:18.194Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:50:18.198Z,1422575418.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:50:18.581Z,1422575418.581 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:50:18.595Z,1422575418.595 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:50:18.594Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:50:18.598Z,1422575418.598 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:50:18.596Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:50:18.600Z,1422575418.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:50:18.989Z,1422575418.989 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:50:19.067Z,1422575419.067 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:50:19.065Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:50:19.073Z,1422575419.073 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:50:19.072Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:50:19.075Z,1422575419.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:50:19.458Z,1422575419.458 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:50:19.501Z,1422575419.501 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:50:19.499Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:50:19.503Z,1422575419.503 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:50:19.502Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:50:19.505Z,1422575419.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:50:19.898Z,1422575419.898 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:50:19.948Z,1422575419.948 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:50:19.947Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:50:19.950Z,1422575419.950 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:50:19.949Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:50:19.953Z,1422575419.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:50:20.343Z,1422575420.343 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:50:20.358Z,1422575420.358 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:50:20.357Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:50:20.361Z,1422575420.361 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:50:20.359Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:50:20.363Z,1422575420.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:50:20.760Z,1422575420.760 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:50:20.830Z,1422575420.830 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:50:20.829Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:50:20.849Z,1422575420.849 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:50:20.847Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:50:20.855Z,1422575420.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:50:21.241Z,1422575421.241 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:50:21.806Z,1422575421.806 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:50:21.783Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:50:21.808Z,1422575421.808 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:50:21.807Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:50:21.810Z,1422575421.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:50:22.173Z,1422575422.173 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:50:22.245Z,1422575422.245 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:50:22.244Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:50:22.248Z,1422575422.248 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:50:22.246Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:50:22.250Z,1422575422.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:50:22.644Z,1422575422.644 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:50:22.700Z,1422575422.700 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:50:22.699Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:50:22.703Z,1422575422.703 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:50:22.701Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:50:22.705Z,1422575422.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:50:23.095Z,1422575423.095 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:50:23.123Z,1422575423.123 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:50:23.122Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:50:23.125Z,1422575423.125 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:50:23.124Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:50:23.127Z,1422575423.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:50:23.509Z,1422575423.509 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:50:23.567Z,1422575423.567 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:50:23.565Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:50:23.569Z,1422575423.569 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:50:23.568Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:50:23.571Z,1422575423.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:50:23.965Z,1422575423.965 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:50:24.046Z,1422575424.046 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:50:24.045Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:50:24.049Z,1422575424.049 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:50:24.047Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:50:24.051Z,1422575424.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:50:24.449Z,1422575424.449 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:50:24.464Z,1422575424.464 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:50:24.463Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:50:24.467Z,1422575424.467 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:50:24.465Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:50:24.469Z,1422575424.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:50:24.857Z,1422575424.857 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:50:24.882Z,1422575424.882 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:50:24.881Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:50:24.905Z,1422575424.905 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:50:24.883Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:50:24.907Z,1422575424.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:50:25.292Z,1422575425.292 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:50:25.846Z,1422575425.846 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:50:25.845Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:50:25.848Z,1422575425.848 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:50:25.847Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:50:25.851Z,1422575425.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:50:26.228Z,1422575426.228 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:50:26.261Z,1422575426.261 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:50:26.259Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:50:26.263Z,1422575426.263 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:50:26.262Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:50:26.265Z,1422575426.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:50:26.661Z,1422575426.661 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:50:26.676Z,1422575426.676 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:50:26.675Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:50:26.678Z,1422575426.678 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:50:26.677Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:50:26.681Z,1422575426.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:50:27.061Z,1422575427.061 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:50:27.106Z,1422575427.106 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:50:27.104Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:50:27.109Z,1422575427.109 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:50:27.107Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:50:27.111Z,1422575427.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:50:27.483Z,1422575427.483 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:50:27.527Z,1422575427.527 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:50:27.526Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:50:27.530Z,1422575427.530 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:50:27.529Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:50:27.532Z,1422575427.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:50:27.907Z,1422575427.907 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:50:27.956Z,1422575427.956 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:50:27.955Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:50:27.959Z,1422575427.959 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:50:27.957Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:50:27.961Z,1422575427.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:50:28.335Z,1422575428.335 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:50:28.358Z,1422575428.358 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:50:28.357Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:50:28.360Z,1422575428.360 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:50:28.359Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:50:28.363Z,1422575428.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:50:28.759Z,1422575428.759 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:50:28.806Z,1422575428.806 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:50:28.804Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:50:28.808Z,1422575428.808 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:50:28.807Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:50:28.810Z,1422575428.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:50:29.185Z,1422575429.185 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:50:29.224Z,1422575429.224 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:50:29.222Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:50:29.226Z,1422575429.226 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:50:29.224Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:50:29.228Z,1422575429.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:50:29.621Z,1422575429.621 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:50:30.152Z,1422575430.152 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:50:30.151Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:50:30.155Z,1422575430.155 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:50:30.153Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:50:30.157Z,1422575430.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:50:30.538Z,1422575430.538 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:50:30.576Z,1422575430.576 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:50:30.574Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:50:30.578Z,1422575430.578 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:50:30.577Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:50:30.580Z,1422575430.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:50:30.976Z,1422575430.976 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:50:31.007Z,1422575431.007 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:50:30.989Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:50:31.009Z,1422575431.009 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:50:31.008Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:50:31.016Z,1422575431.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:50:31.372Z,1422575431.372 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:50:31.415Z,1422575431.415 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:50:31.413Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:50:31.417Z,1422575431.417 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:50:31.416Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:50:31.420Z,1422575431.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:50:31.809Z,1422575431.809 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:50:31.843Z,1422575431.843 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:50:31.842Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:50:31.865Z,1422575431.865 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:50:31.864Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:50:31.868Z,1422575431.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:50:32.242Z,1422575432.242 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:50:32.320Z,1422575432.320 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:50:32.319Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:50:32.322Z,1422575432.322 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:50:32.321Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:50:32.329Z,1422575432.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:50:32.708Z,1422575432.708 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:50:32.725Z,1422575432.725 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:50:32.724Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:50:32.727Z,1422575432.727 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:50:32.726Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:50:32.730Z,1422575432.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:50:33.119Z,1422575433.119 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:50:33.134Z,1422575433.134 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:50:33.132Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:50:33.136Z,1422575433.136 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:50:33.135Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:50:33.138Z,1422575433.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:50:33.478Z,1422575433.478 [CommandLine](IMPORTANT): got command show stack
2015-01-29T23:50:33.478Z,1422575433.478 [CommandLine](IMPORTANT): Behavior Stack:

2015-01-29T23:50:33.479Z,1422575433.479 [Default](IMPORTANT): Priority 0: Default:B.GoToSurface
2015-01-29T23:50:33.479Z,1422575433.479 [Default:CheckIn](IMPORTANT): Priority 1: Default:CheckIn:A.SetSpeed
2015-01-29T23:50:33.480Z,1422575433.480 [Default:CheckIn](IMPORTANT): Priority 2: Default:CheckIn:Read_Iridium
2015-01-29T23:50:33.480Z,1422575433.480 [Default:WaitAtTheSurface](IMPORTANT): Priority 3: Default:WaitAtTheSurface:RunApplicationAtLowSpeed.SetSpeed
2015-01-29T23:50:33.548Z,1422575433.548 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:50:33.575Z,1422575433.575 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:50:33.573Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:50:33.577Z,1422575433.577 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:50:33.576Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:50:33.580Z,1422575433.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:50:33.980Z,1422575433.980 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:50:34.022Z,1422575434.022 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:50:34.021Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:50:34.024Z,1422575434.024 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:50:34.023Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:50:34.027Z,1422575434.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:50:34.417Z,1422575434.417 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:50:34.947Z,1422575434.947 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:50:34.946Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:50:34.949Z,1422575434.949 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:50:34.948Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:50:34.952Z,1422575434.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:50:35.338Z,1422575435.338 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:50:35.416Z,1422575435.416 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:50:35.415Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:50:35.423Z,1422575435.423 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:50:35.421Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:50:35.429Z,1422575435.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:50:35.803Z,1422575435.803 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:50:35.861Z,1422575435.861 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:50:35.860Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:50:35.863Z,1422575435.863 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:50:35.862Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:50:35.883Z,1422575435.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:50:36.252Z,1422575436.252 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:50:36.292Z,1422575436.292 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:50:36.290Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:50:36.294Z,1422575436.294 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:50:36.293Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:50:36.297Z,1422575436.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:50:36.684Z,1422575436.684 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:50:36.758Z,1422575436.758 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:50:36.757Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:50:36.765Z,1422575436.765 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:50:36.764Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:50:36.768Z,1422575436.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:50:37.137Z,1422575437.137 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:50:37.171Z,1422575437.171 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:50:37.170Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:50:37.189Z,1422575437.189 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:50:37.188Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:50:37.196Z,1422575437.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:50:37.569Z,1422575437.569 [CommandLine](IMPORTANT): got command show variable dataoverhttp
2015-01-29T23:50:37.598Z,1422575437.598 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:50:37.603Z,1422575437.603 [CommandLine](IMPORTANT): DataOverHttps.loadAtStartup (bool)
2015-01-29T23:50:37.604Z,1422575437.604 [CommandLine](IMPORTANT): DataOverHttps.power (watt)
2015-01-29T23:50:37.604Z,1422575437.604 [CommandLine](IMPORTANT): DataOverHttps.connectionTimeout (second)
2015-01-29T23:50:37.605Z,1422575437.605 [CommandLine](IMPORTANT): DataOverHttps.period (second)
2015-01-29T23:50:37.605Z,1422575437.605 [CommandLine](IMPORTANT): DataOverHttps.timeout (minute)
2015-01-29T23:50:37.606Z,1422575437.606 [CommandLine](IMPORTANT): DataOverHttps.verbosity (count)
2015-01-29T23:50:37.675Z,1422575437.675 [CommandLine](IMPORTANT): DataOverHttps.platform_communications (bool)
2015-01-29T23:50:37.702Z,1422575437.702 [CommandLine](IMPORTANT): DataOverHttps.durationOfLastRun (second)
2015-01-29T23:50:37.739Z,1422575437.739 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:50:37.738Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:50:37.742Z,1422575437.742 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:50:37.740Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:50:37.744Z,1422575437.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:50:38.115Z,1422575438.115 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:50:38.144Z,1422575438.144 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:50:38.143Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:50:38.146Z,1422575438.146 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:50:38.145Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:50:38.149Z,1422575438.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:50:38.539Z,1422575438.539 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:50:38.617Z,1422575438.617 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:50:38.615Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:50:38.623Z,1422575438.623 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:50:38.622Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:50:38.630Z,1422575438.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:50:38.996Z,1422575438.996 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:50:39.073Z,1422575439.073 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:50:39.072Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:50:39.076Z,1422575439.076 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:50:39.074Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:50:39.078Z,1422575439.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:50:39.457Z,1422575439.457 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:50:39.993Z,1422575439.993 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:50:39.991Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:50:39.995Z,1422575439.995 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:50:39.994Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:50:39.998Z,1422575439.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:50:40.394Z,1422575440.394 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:50:40.422Z,1422575440.422 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:50:40.421Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:50:40.424Z,1422575440.424 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:50:40.423Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:50:40.427Z,1422575440.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:50:40.815Z,1422575440.815 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:50:40.830Z,1422575440.830 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:50:40.828Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:50:40.832Z,1422575440.832 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:50:40.830Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:50:40.850Z,1422575440.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:50:41.227Z,1422575441.227 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:50:41.265Z,1422575441.265 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:50:41.263Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:50:41.267Z,1422575441.267 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:50:41.266Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:50:41.269Z,1422575441.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:50:41.651Z,1422575441.651 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:50:41.744Z,1422575441.744 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:50:41.743Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:50:41.746Z,1422575441.746 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:50:41.745Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:50:41.749Z,1422575441.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:50:42.145Z,1422575442.145 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:50:42.232Z,1422575442.232 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:50:42.227Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:50:42.235Z,1422575442.235 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:50:42.233Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:50:42.254Z,1422575442.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:50:42.630Z,1422575442.630 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:50:42.687Z,1422575442.687 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:50:42.685Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:50:42.706Z,1422575442.707 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:50:42.688Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:50:42.721Z,1422575442.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:50:43.101Z,1422575443.101 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:50:43.118Z,1422575443.118 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:50:43.116Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:50:43.120Z,1422575443.120 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:50:43.119Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:50:43.122Z,1422575443.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:50:43.430Z,1422575443.430 [CommandLine](IMPORTANT): got command get DataOverHttps.loadAtStartup
2015-01-29T23:50:43.430Z,1422575443.430 [CommandLine](IMPORTANT): DataOverHttps.loadAtStartup 1 bool
2015-01-29T23:50:43.519Z,1422575443.519 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:50:43.535Z,1422575443.535 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:50:43.533Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:50:43.537Z,1422575443.537 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:50:43.536Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:50:43.539Z,1422575443.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:50:43.927Z,1422575443.927 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:50:43.970Z,1422575443.970 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:50:43.968Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:50:43.972Z,1422575443.972 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:50:43.971Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:50:43.975Z,1422575443.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:50:44.349Z,1422575444.349 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:50:44.886Z,1422575444.886 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:50:44.885Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:50:44.888Z,1422575444.888 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:50:44.887Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:50:44.891Z,1422575444.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:50:45.286Z,1422575445.286 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:50:45.362Z,1422575445.362 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:50:45.361Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:50:45.369Z,1422575445.369 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:50:45.363Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:50:45.371Z,1422575445.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:50:45.759Z,1422575445.759 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:50:45.776Z,1422575445.776 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:50:45.774Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:50:45.778Z,1422575445.778 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:50:45.777Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:50:45.780Z,1422575445.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:50:46.171Z,1422575446.171 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:50:46.222Z,1422575446.222 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:50:46.221Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:50:46.225Z,1422575446.225 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:50:46.223Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:50:46.227Z,1422575446.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:50:46.608Z,1422575446.608 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:50:46.641Z,1422575446.641 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:50:46.640Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:50:46.644Z,1422575446.644 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:50:46.643Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:50:46.646Z,1422575446.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:50:47.044Z,1422575447.044 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:50:47.082Z,1422575447.082 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:50:47.081Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:50:47.085Z,1422575447.085 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:50:47.083Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:50:47.087Z,1422575447.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:50:47.477Z,1422575447.477 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:50:47.492Z,1422575447.492 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:50:47.490Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:50:47.494Z,1422575447.494 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:50:47.493Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:50:47.496Z,1422575447.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:50:47.886Z,1422575447.886 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:50:47.900Z,1422575447.900 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:50:47.899Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:50:47.903Z,1422575447.903 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:50:47.901Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:50:47.905Z,1422575447.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:50:48.311Z,1422575448.311 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:50:48.351Z,1422575448.351 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:50:48.350Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:50:48.354Z,1422575448.354 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:50:48.352Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:50:48.356Z,1422575448.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:50:48.739Z,1422575448.739 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:50:48.776Z,1422575448.776 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:50:48.775Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:50:48.779Z,1422575448.779 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:50:48.777Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:50:48.781Z,1422575448.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:50:49.179Z,1422575449.179 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:50:49.710Z,1422575449.710 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:50:49.709Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:50:49.713Z,1422575449.713 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:50:49.711Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:50:49.715Z,1422575449.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:50:50.109Z,1422575450.109 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:50:50.143Z,1422575450.143 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:50:50.141Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:50:50.145Z,1422575450.145 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:50:50.144Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:50:50.147Z,1422575450.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:50:50.538Z,1422575450.538 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:50:50.553Z,1422575450.553 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:50:50.551Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:50:50.555Z,1422575450.555 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:50:50.554Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:50:50.558Z,1422575450.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:50:50.950Z,1422575450.950 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:50:51.017Z,1422575451.017 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:50:51.015Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:50:51.019Z,1422575451.019 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:50:51.018Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:50:51.041Z,1422575451.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:50:51.428Z,1422575451.428 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:50:51.530Z,1422575451.530 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:50:51.529Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:50:51.533Z,1422575451.533 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:50:51.531Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:50:51.534Z,1422575451.534 [CommandLine](IMPORTANT): got command show variable sendData
2015-01-29T23:50:51.559Z,1422575451.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:50:51.620Z,1422575451.620 [CommandLine](IMPORTANT): Vehicle.sendDataToShore (bool)
2015-01-29T23:50:51.939Z,1422575451.939 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:50:51.991Z,1422575451.991 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:50:51.989Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:50:51.993Z,1422575451.993 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:50:51.992Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:50:51.996Z,1422575451.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:50:52.385Z,1422575452.385 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:50:52.401Z,1422575452.401 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:50:52.400Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:50:52.403Z,1422575452.403 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:50:52.402Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:50:52.406Z,1422575452.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:50:52.798Z,1422575452.798 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:50:52.863Z,1422575452.863 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:50:52.862Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:50:52.866Z,1422575452.866 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:50:52.865Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:50:52.868Z,1422575452.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:50:53.262Z,1422575453.262 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:50:53.276Z,1422575453.276 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:50:53.275Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:50:53.298Z,1422575453.298 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:50:53.297Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:50:53.301Z,1422575453.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:50:53.683Z,1422575453.683 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:50:54.245Z,1422575454.245 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:50:54.244Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:50:54.248Z,1422575454.248 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:50:54.246Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:50:54.250Z,1422575454.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:50:54.640Z,1422575454.640 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:50:54.752Z,1422575454.752 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:50:54.750Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:50:54.754Z,1422575454.754 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:50:54.753Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:50:54.756Z,1422575454.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:50:55.145Z,1422575455.145 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:50:55.161Z,1422575455.161 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:50:55.160Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:50:55.164Z,1422575455.164 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:50:55.162Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:50:55.166Z,1422575455.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:50:55.566Z,1422575455.566 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:50:55.616Z,1422575455.616 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:50:55.614Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:50:55.622Z,1422575455.622 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:50:55.621Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:50:55.629Z,1422575455.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:50:56.027Z,1422575456.027 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:50:56.075Z,1422575456.075 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:50:56.074Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:50:56.078Z,1422575456.078 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:50:56.076Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:50:56.080Z,1422575456.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:50:56.254Z,1422575456.254 [CommandLine](IMPORTANT): got command get Vehicle.sendDataToShore
2015-01-29T23:50:56.254Z,1422575456.254 [CommandLine](IMPORTANT): Vehicle.sendDataToShore 1 bool
2015-01-29T23:50:56.467Z,1422575456.467 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:50:56.510Z,1422575456.510 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:50:56.508Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:50:56.512Z,1422575456.512 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:50:56.511Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:50:56.515Z,1422575456.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:50:56.904Z,1422575456.904 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:50:56.919Z,1422575456.919 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:50:56.917Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:50:56.921Z,1422575456.921 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:50:56.920Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:50:56.923Z,1422575456.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:50:57.321Z,1422575457.321 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:50:57.337Z,1422575457.337 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:50:57.334Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:50:57.339Z,1422575457.339 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:50:57.338Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:50:57.341Z,1422575457.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:50:57.721Z,1422575457.721 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:50:57.797Z,1422575457.797 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:50:57.796Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:50:57.799Z,1422575457.799 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:50:57.798Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:50:57.806Z,1422575457.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:50:58.194Z,1422575458.194 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:50:58.724Z,1422575458.724 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:50:58.722Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:50:58.726Z,1422575458.726 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:50:58.725Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:50:58.728Z,1422575458.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:50:59.119Z,1422575459.119 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:50:59.151Z,1422575459.151 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:50:59.150Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:50:59.153Z,1422575459.153 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:50:59.152Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:50:59.177Z,1422575459.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:50:59.552Z,1422575459.552 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:50:59.575Z,1422575459.575 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:50:59.574Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:50:59.578Z,1422575459.578 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:50:59.576Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:50:59.580Z,1422575459.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:50:59.968Z,1422575459.968 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:50:59.997Z,1422575459.997 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:50:59.995Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:50:59.999Z,1422575459.999 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:50:59.998Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:51:00.001Z,1422575460.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:51:00.393Z,1422575460.393 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:51:00.426Z,1422575460.426 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:51:00.425Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:51:00.429Z,1422575460.429 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:51:00.427Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:51:00.431Z,1422575460.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:51:00.822Z,1422575460.822 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:51:00.902Z,1422575460.902 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:51:00.899Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:51:00.906Z,1422575460.906 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:51:00.905Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:51:00.913Z,1422575460.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:51:01.291Z,1422575461.291 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:51:01.308Z,1422575461.308 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:51:01.306Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:51:01.326Z,1422575461.326 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:51:01.309Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:51:01.328Z,1422575461.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:51:01.703Z,1422575461.703 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:51:01.733Z,1422575461.733 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:51:01.732Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:51:01.735Z,1422575461.735 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:51:01.734Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:51:01.738Z,1422575461.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:51:02.126Z,1422575462.126 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:51:02.157Z,1422575462.157 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:51:02.156Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:51:02.160Z,1422575462.160 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:51:02.159Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:51:02.162Z,1422575462.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:51:02.556Z,1422575462.556 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:51:03.090Z,1422575463.090 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:51:03.089Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:51:03.093Z,1422575463.093 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:51:03.091Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:51:03.095Z,1422575463.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:51:03.482Z,1422575463.482 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:51:03.511Z,1422575463.511 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:51:03.509Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:51:03.513Z,1422575463.513 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:51:03.512Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:51:03.515Z,1422575463.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:51:03.928Z,1422575463.928 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:51:03.959Z,1422575463.959 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:51:03.958Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:51:03.962Z,1422575463.962 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:51:03.960Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:51:03.964Z,1422575463.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:51:04.363Z,1422575464.363 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:51:04.395Z,1422575464.395 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:51:04.393Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:51:04.397Z,1422575464.397 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:51:04.396Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:51:04.399Z,1422575464.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:51:04.800Z,1422575464.800 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:51:04.844Z,1422575464.844 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:51:04.843Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:51:04.846Z,1422575464.846 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:51:04.845Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:51:04.849Z,1422575464.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:51:05.245Z,1422575465.245 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:51:05.290Z,1422575465.290 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:51:05.289Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:51:05.293Z,1422575465.293 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:51:05.291Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:51:05.295Z,1422575465.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:51:05.682Z,1422575465.682 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:51:05.697Z,1422575465.697 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:51:05.696Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:51:05.699Z,1422575465.699 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:51:05.698Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:51:05.702Z,1422575465.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:51:06.090Z,1422575466.090 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:51:06.105Z,1422575466.105 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:51:06.103Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:51:06.107Z,1422575466.107 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:51:06.106Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:51:06.109Z,1422575466.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:51:06.515Z,1422575466.515 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:51:06.546Z,1422575466.546 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:51:06.544Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:51:06.548Z,1422575466.548 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:51:06.547Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:51:06.551Z,1422575466.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:51:06.940Z,1422575466.940 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:51:07.070Z,1422575467.070 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:51:07.069Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:51:07.073Z,1422575467.073 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:51:07.071Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:51:07.087Z,1422575467.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:51:07.472Z,1422575467.472 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:51:07.998Z,1422575467.998 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:51:07.997Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:51:08.001Z,1422575468.001 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:51:07.999Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:51:08.003Z,1422575468.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:51:08.394Z,1422575468.394 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:51:08.427Z,1422575468.427 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:51:08.426Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:51:08.450Z,1422575468.450 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:51:08.449Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:51:08.452Z,1422575468.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:51:08.839Z,1422575468.839 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:51:08.900Z,1422575468.900 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:51:08.899Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:51:08.903Z,1422575468.903 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:51:08.901Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:51:08.905Z,1422575468.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:51:09.303Z,1422575469.303 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:51:09.349Z,1422575469.349 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:51:09.329Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:51:09.352Z,1422575469.352 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:51:09.350Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:51:09.354Z,1422575469.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:51:09.736Z,1422575469.736 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:51:09.805Z,1422575469.805 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:51:09.804Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:51:09.808Z,1422575469.808 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:51:09.806Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:51:09.810Z,1422575469.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:51:10.204Z,1422575470.204 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:51:10.289Z,1422575470.289 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:51:10.287Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:51:10.291Z,1422575470.291 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:51:10.290Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:51:10.293Z,1422575470.293 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:51:10.293Z,1422575470.293 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 3
2015-01-29T23:51:10.293Z,1422575470.293 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2015-01-29T23:51:10.296Z,1422575470.296 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:51:10.296Z,1422575470.296 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 3
2015-01-29T23:51:10.296Z,1422575470.296 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2015-01-29T23:51:10.298Z,1422575470.298 [DeadReckonWithRespectToWater](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:51:10.298Z,1422575470.298 [DeadReckonWithRespectToWater] Software Fault, FailCount= 3
2015-01-29T23:51:10.298Z,1422575470.298 [DeadReckonWithRespectToWater](ERROR): Software Fault
2015-01-29T23:51:10.301Z,1422575470.301 [DeadReckonWithRespectToSeafloor](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:51:10.301Z,1422575470.301 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 3
2015-01-29T23:51:10.301Z,1422575470.301 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2015-01-29T23:51:10.304Z,1422575470.304 [DeadReckonUsingDVLWaterTrack](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:51:10.304Z,1422575470.304 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 3
2015-01-29T23:51:10.304Z,1422575470.304 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2015-01-29T23:51:10.306Z,1422575470.306 [DeadReckonUsingCompactModelForecast](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:51:10.306Z,1422575470.306 [DeadReckonUsingCompactModelForecast] Software Fault, FailCount= 3
2015-01-29T23:51:10.306Z,1422575470.306 [DeadReckonUsingCompactModelForecast](ERROR): Software Fault
2015-01-29T23:51:10.319Z,1422575470.319 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2015-01-29T23:51:10.319Z,1422575470.319 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2015-01-29T23:51:10.320Z,1422575470.320 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToWater
2015-01-29T23:51:10.320Z,1422575470.320 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2015-01-29T23:51:10.320Z,1422575470.320 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2015-01-29T23:51:10.320Z,1422575470.320 [CBIT](ERROR): Software Fault in component: DeadReckonUsingCompactModelForecast
2015-01-29T23:51:10.691Z,1422575470.691 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:51:10.794Z,1422575470.794 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:51:10.793Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:51:10.797Z,1422575470.797 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:51:10.795Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:51:10.820Z,1422575470.820 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2015-01-29T23:51:10.820Z,1422575470.820 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 3
2015-01-29T23:51:10.821Z,1422575470.821 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2015-01-29T23:51:10.821Z,1422575470.821 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 3
2015-01-29T23:51:10.821Z,1422575470.821 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToWater
2015-01-29T23:51:10.821Z,1422575470.821 [DeadReckonWithRespectToWater] No Fault, FailCount= 3
2015-01-29T23:51:10.822Z,1422575470.822 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2015-01-29T23:51:10.822Z,1422575470.822 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 3
2015-01-29T23:51:10.823Z,1422575470.823 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2015-01-29T23:51:10.823Z,1422575470.823 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 3
2015-01-29T23:51:10.856Z,1422575470.856 [CBIT](INFO): Clearing failed state for component DeadReckonUsingCompactModelForecast
2015-01-29T23:51:10.856Z,1422575470.856 [DeadReckonUsingCompactModelForecast] No Fault, FailCount= 3
2015-01-29T23:51:11.214Z,1422575471.214 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:51:11.261Z,1422575471.261 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:51:11.256Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:51:11.263Z,1422575471.263 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:51:11.262Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:51:11.269Z,1422575471.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2015-01-29T23:51:11.269Z,1422575471.269 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2015-01-29T23:51:11.269Z,1422575471.269 [DeadReckonWithRespectToWater](DEBUG): Initializing DeadReckonWithRespectToWater component.
2015-01-29T23:51:11.270Z,1422575471.270 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2015-01-29T23:51:11.270Z,1422575471.270 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2015-01-29T23:51:11.270Z,1422575471.270 [DeadReckonUsingCompactModelForecast](DEBUG): Initializing DeadReckonUsingCompactModelForecast component.
2015-01-29T23:51:11.651Z,1422575471.651 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:51:11.672Z,1422575471.672 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:51:11.670Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:51:11.674Z,1422575471.674 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:51:11.673Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:51:11.686Z,1422575471.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-01-29T23:51:11.687Z,1422575471.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:51:11.784Z,1422575471.784 [CommandLine](IMPORTANT): got command get DataOverHttps.platform_communications
2015-01-29T23:51:11.786Z,1422575471.786 [CommandLine](IMPORTANT): DataOverHttps.platform_communications 0 bool
2015-01-29T23:51:12.099Z,1422575472.099 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:51:12.132Z,1422575472.132 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:51:12.131Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:51:12.135Z,1422575472.135 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:51:12.133Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:51:12.136Z,1422575472.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-01-29T23:51:12.137Z,1422575472.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:51:12.528Z,1422575472.528 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:51:13.066Z,1422575473.066 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:51:13.064Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:51:13.068Z,1422575473.068 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:51:13.067Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:51:13.070Z,1422575473.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 2 cycles since last successful read, accepting data for 5 cycles.
2015-01-29T23:51:13.071Z,1422575473.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:51:13.466Z,1422575473.466 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:51:13.529Z,1422575473.529 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:51:13.523Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:51:13.531Z,1422575473.531 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:51:13.530Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:51:13.537Z,1422575473.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 3 cycles since last successful read, accepting data for 5 cycles.
2015-01-29T23:51:13.538Z,1422575473.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:51:13.927Z,1422575473.927 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:51:13.943Z,1422575473.943 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:51:13.942Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:51:13.946Z,1422575473.946 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:51:13.944Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:51:13.947Z,1422575473.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 4 cycles since last successful read, accepting data for 5 cycles.
2015-01-29T23:51:13.948Z,1422575473.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:51:14.331Z,1422575474.331 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:51:14.373Z,1422575474.373 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:51:14.371Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:51:14.375Z,1422575474.375 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:51:14.374Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:51:14.377Z,1422575474.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 5 cycles since last successful read, accepting data for 5 cycles.
2015-01-29T23:51:14.378Z,1422575474.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:51:14.768Z,1422575474.768 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:51:14.819Z,1422575474.819 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:51:14.801Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:51:14.821Z,1422575474.821 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:51:14.820Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:51:14.823Z,1422575474.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:51:15.204Z,1422575475.204 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:51:15.238Z,1422575475.238 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:51:15.236Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:51:15.240Z,1422575475.240 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:51:15.239Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:51:15.243Z,1422575475.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:51:15.633Z,1422575475.633 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:51:15.647Z,1422575475.647 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:51:15.645Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:51:15.649Z,1422575475.649 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:51:15.648Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:51:15.652Z,1422575475.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:51:16.038Z,1422575476.038 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:51:16.053Z,1422575476.053 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:51:16.051Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:51:16.055Z,1422575476.055 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:51:16.054Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:51:16.057Z,1422575476.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:51:16.434Z,1422575476.434 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:51:16.477Z,1422575476.477 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:51:16.458Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:51:16.483Z,1422575476.483 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:51:16.481Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:51:16.485Z,1422575476.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:51:16.851Z,1422575476.851 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:51:16.932Z,1422575476.932 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:51:16.931Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:51:16.934Z,1422575476.934 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:51:16.933Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:51:16.937Z,1422575476.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:51:17.328Z,1422575477.328 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:51:17.853Z,1422575477.853 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:51:17.852Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:51:17.856Z,1422575477.856 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:51:17.854Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:51:17.858Z,1422575477.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:51:18.253Z,1422575478.253 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:51:18.298Z,1422575478.298 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:51:18.297Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:51:18.301Z,1422575478.301 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:51:18.300Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:51:18.303Z,1422575478.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:51:18.702Z,1422575478.702 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:51:18.717Z,1422575478.717 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:51:18.715Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:51:18.719Z,1422575478.719 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:51:18.718Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:51:18.722Z,1422575478.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:51:19.118Z,1422575479.118 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:51:19.151Z,1422575479.151 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:51:19.150Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:51:19.153Z,1422575479.153 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:51:19.152Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:51:19.156Z,1422575479.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:51:19.543Z,1422575479.543 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:51:19.576Z,1422575479.576 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:51:19.575Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:51:19.600Z,1422575479.600 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:51:19.598Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:51:19.602Z,1422575479.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:51:19.972Z,1422575479.972 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:51:20.045Z,1422575480.045 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:51:20.044Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:51:20.052Z,1422575480.052 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:51:20.050Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:51:20.055Z,1422575480.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:51:20.444Z,1422575480.444 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:51:20.461Z,1422575480.461 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:51:20.459Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:51:20.463Z,1422575480.463 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:51:20.462Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:51:20.466Z,1422575480.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:51:20.857Z,1422575480.857 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:51:20.872Z,1422575480.872 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:51:20.870Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:51:20.874Z,1422575480.874 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:51:20.873Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:51:20.877Z,1422575480.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:51:21.265Z,1422575481.265 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:51:21.281Z,1422575481.281 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:51:21.278Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:51:21.283Z,1422575481.283 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:51:21.282Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:51:21.308Z,1422575481.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:51:21.670Z,1422575481.670 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:51:21.705Z,1422575481.705 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:51:21.684Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:51:21.707Z,1422575481.707 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:51:21.706Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:51:21.709Z,1422575481.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:51:22.083Z,1422575482.083 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:51:22.111Z,1422575482.111 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:51:22.110Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:51:22.114Z,1422575482.114 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:51:22.112Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:51:22.116Z,1422575482.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:51:22.512Z,1422575482.512 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:51:23.114Z,1422575483.114 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:51:23.112Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:51:23.117Z,1422575483.117 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:51:23.116Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:51:23.119Z,1422575483.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:51:23.497Z,1422575483.497 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:51:23.581Z,1422575483.581 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:51:23.580Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:51:23.592Z,1422575483.592 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:51:23.582Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:51:23.594Z,1422575483.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:51:23.982Z,1422575483.982 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:51:24.040Z,1422575484.040 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:51:24.038Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:51:24.053Z,1422575484.053 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:51:24.052Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:51:24.056Z,1422575484.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:51:24.438Z,1422575484.438 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:51:24.472Z,1422575484.472 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:51:24.470Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:51:24.474Z,1422575484.474 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:51:24.473Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:51:24.477Z,1422575484.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:51:24.871Z,1422575484.871 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:51:24.934Z,1422575484.934 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:51:24.932Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:51:24.936Z,1422575484.936 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:51:24.935Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:51:24.952Z,1422575484.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:51:25.332Z,1422575485.332 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:51:25.403Z,1422575485.403 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:51:25.401Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:51:25.405Z,1422575485.405 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:51:25.404Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:51:25.408Z,1422575485.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:51:25.805Z,1422575485.805 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:51:25.819Z,1422575485.819 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:51:25.818Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:51:25.822Z,1422575485.822 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:51:25.820Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:51:25.824Z,1422575485.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:51:26.218Z,1422575486.218 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:51:26.232Z,1422575486.232 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:51:26.230Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:51:26.234Z,1422575486.234 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:51:26.233Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:51:26.236Z,1422575486.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:51:26.626Z,1422575486.626 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:51:26.691Z,1422575486.691 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:51:26.689Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:51:26.696Z,1422575486.696 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:51:26.692Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:51:26.706Z,1422575486.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:51:27.075Z,1422575487.075 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:51:27.121Z,1422575487.121 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:51:27.120Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:51:27.124Z,1422575487.124 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:51:27.122Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:51:27.126Z,1422575487.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:51:27.508Z,1422575487.508 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:51:28.034Z,1422575488.034 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:51:28.032Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:51:28.036Z,1422575488.036 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:51:28.035Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:51:28.038Z,1422575488.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:51:28.429Z,1422575488.429 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:51:28.490Z,1422575488.490 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:51:28.488Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:51:28.492Z,1422575488.492 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:51:28.491Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:51:28.496Z,1422575488.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:51:28.869Z,1422575488.869 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:51:28.883Z,1422575488.883 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:51:28.882Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:51:28.886Z,1422575488.886 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:51:28.884Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:51:28.888Z,1422575488.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:51:29.274Z,1422575489.274 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:51:29.327Z,1422575489.327 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:51:29.326Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:51:29.330Z,1422575489.330 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:51:29.329Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:51:29.332Z,1422575489.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:51:29.711Z,1422575489.711 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:51:29.784Z,1422575489.784 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:51:29.783Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:51:29.787Z,1422575489.787 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:51:29.785Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:51:29.789Z,1422575489.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:51:30.159Z,1422575490.159 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:51:30.187Z,1422575490.187 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:51:30.186Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:51:30.189Z,1422575490.189 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:51:30.188Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:51:30.192Z,1422575490.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:51:30.584Z,1422575490.584 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:51:30.599Z,1422575490.599 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:51:30.597Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:51:30.601Z,1422575490.601 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:51:30.600Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:51:30.603Z,1422575490.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:51:30.989Z,1422575490.989 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:51:31.003Z,1422575491.003 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:51:31.002Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:51:31.006Z,1422575491.006 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:51:31.004Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:51:31.008Z,1422575491.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:51:31.409Z,1422575491.409 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:51:31.439Z,1422575491.439 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:51:31.437Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:51:31.441Z,1422575491.441 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:51:31.440Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:51:31.443Z,1422575491.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:51:31.827Z,1422575491.827 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:51:31.854Z,1422575491.854 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:51:31.852Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:51:31.856Z,1422575491.856 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:51:31.855Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:51:31.858Z,1422575491.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:51:32.247Z,1422575492.247 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:51:32.781Z,1422575492.781 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:51:32.780Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:51:32.784Z,1422575492.784 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:51:32.783Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:51:32.786Z,1422575492.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:51:33.181Z,1422575493.181 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:51:33.265Z,1422575493.265 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:51:33.264Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:51:33.268Z,1422575493.268 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:51:33.267Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:51:33.270Z,1422575493.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:51:33.665Z,1422575493.665 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:51:33.709Z,1422575493.709 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:51:33.708Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:51:33.712Z,1422575493.712 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:51:33.710Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:51:33.714Z,1422575493.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:51:34.089Z,1422575494.089 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:51:34.123Z,1422575494.123 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:51:34.122Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:51:34.146Z,1422575494.146 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:51:34.144Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:51:34.148Z,1422575494.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:51:34.531Z,1422575494.531 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:51:34.558Z,1422575494.558 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:51:34.557Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:51:34.560Z,1422575494.560 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:51:34.559Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:51:34.563Z,1422575494.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:51:34.959Z,1422575494.959 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:51:34.959Z,1422575494.959 [DVL_micro](FAULT): DVL failed to acquire valid data within timeout.
2015-01-29T23:51:34.959Z,1422575494.959 [DVL_micro] Data Fault, FailCount= 1
2015-01-29T23:51:34.959Z,1422575494.959 [DVL_micro](ERROR): Data Fault
2015-01-29T23:51:35.012Z,1422575495.012 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:51:35.011Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:51:35.015Z,1422575495.015 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:51:35.014Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:51:35.017Z,1422575495.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:51:35.059Z,1422575495.059 [CBIT](ERROR): Data Fault in component: DVL_micro
2015-01-29T23:51:35.486Z,1422575495.486 [DVL_micro](INFO): uninitialize:Powering down
2015-01-29T23:51:35.510Z,1422575495.510 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:51:35.508Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:51:35.512Z,1422575495.512 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:51:35.511Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:51:35.515Z,1422575495.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:51:35.904Z,1422575495.904 [DVL_micro](FAULT): LCB fault:  Software Overcurrent.
2015-01-29T23:51:35.904Z,1422575495.904 [DVL_micro] Hardware Fault, FailCount= 1
2015-01-29T23:51:35.904Z,1422575495.904 [DVL_micro](ERROR): Hardware Fault
2015-01-29T23:51:35.953Z,1422575495.953 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:51:35.952Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:51:35.956Z,1422575495.956 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:51:35.954Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:51:35.958Z,1422575495.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:51:36.359Z,1422575496.359 [DVL_micro](INFO): Initializing
2015-01-29T23:51:36.888Z,1422575496.888 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:51:36.887Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:51:36.891Z,1422575496.891 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:51:36.889Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:51:36.893Z,1422575496.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:51:36.909Z,1422575496.909 [CBIT](INFO): Clearing failed state for component DVL_micro
2015-01-29T23:51:36.909Z,1422575496.909 [DVL_micro] No Fault, FailCount= 1
2015-01-29T23:51:37.344Z,1422575497.344 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:51:37.342Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:51:37.346Z,1422575497.346 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:51:37.345Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:51:37.348Z,1422575497.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:51:37.773Z,1422575497.773 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:51:37.772Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:51:37.792Z,1422575497.792 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:51:37.790Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:51:37.798Z,1422575497.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:51:38.222Z,1422575498.222 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:51:38.220Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:51:38.224Z,1422575498.224 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:51:38.223Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:51:38.227Z,1422575498.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:51:38.648Z,1422575498.648 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:51:38.647Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:51:38.651Z,1422575498.651 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:51:38.649Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:51:38.653Z,1422575498.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:51:39.071Z,1422575499.071 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:51:39.069Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:51:39.073Z,1422575499.073 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:51:39.072Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:51:39.076Z,1422575499.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:51:39.504Z,1422575499.504 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:51:39.503Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:51:39.506Z,1422575499.506 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:51:39.505Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:51:39.509Z,1422575499.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:51:39.916Z,1422575499.916 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:51:39.914Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:51:39.918Z,1422575499.918 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:51:39.917Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:51:39.921Z,1422575499.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:51:40.369Z,1422575500.369 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:51:40.368Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:51:40.372Z,1422575500.372 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:51:40.370Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:51:40.374Z,1422575500.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:51:40.810Z,1422575500.810 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:51:40.808Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:51:40.812Z,1422575500.812 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:51:40.811Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:51:40.815Z,1422575500.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:51:41.232Z,1422575501.232 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:51:41.231Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:51:41.234Z,1422575501.234 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:51:41.233Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:51:41.257Z,1422575501.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:51:41.633Z,1422575501.633 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:51:42.160Z,1422575502.160 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:51:42.158Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:51:42.162Z,1422575502.162 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:51:42.161Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:51:42.164Z,1422575502.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:51:42.551Z,1422575502.551 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:51:42.605Z,1422575502.605 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:51:42.603Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:51:42.607Z,1422575502.607 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:51:42.606Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:51:42.610Z,1422575502.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:51:42.997Z,1422575502.997 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:51:43.028Z,1422575503.028 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:51:43.027Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:51:43.030Z,1422575503.030 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:51:43.029Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:51:43.033Z,1422575503.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:51:43.428Z,1422575503.428 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:51:43.460Z,1422575503.460 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:51:43.458Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:51:43.462Z,1422575503.462 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:51:43.461Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:51:43.464Z,1422575503.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:51:43.853Z,1422575503.853 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:51:43.886Z,1422575503.886 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:51:43.884Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:51:43.909Z,1422575503.909 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:51:43.908Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:51:43.916Z,1422575503.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:51:44.285Z,1422575504.285 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:51:44.314Z,1422575504.314 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:51:44.313Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:51:44.317Z,1422575504.317 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:51:44.315Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:51:44.319Z,1422575504.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:51:44.711Z,1422575504.711 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:51:44.725Z,1422575504.725 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:51:44.723Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:51:44.727Z,1422575504.727 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:51:44.726Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:51:44.729Z,1422575504.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:51:45.119Z,1422575505.119 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:51:45.134Z,1422575505.134 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:51:45.132Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:51:45.136Z,1422575505.136 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:51:45.135Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:51:45.158Z,1422575505.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:51:45.527Z,1422575505.527 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:51:45.557Z,1422575505.557 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:51:45.555Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:51:45.559Z,1422575505.559 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:51:45.558Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:51:45.561Z,1422575505.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:51:45.936Z,1422575505.936 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:51:45.971Z,1422575505.971 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:51:45.970Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:51:45.974Z,1422575505.974 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:51:45.972Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:51:45.976Z,1422575505.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:51:46.369Z,1422575506.369 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:51:46.914Z,1422575506.914 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:51:46.913Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:51:46.917Z,1422575506.917 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:51:46.915Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:51:46.919Z,1422575506.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:51:47.306Z,1422575507.306 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:51:47.360Z,1422575507.360 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:51:47.359Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:51:47.363Z,1422575507.363 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:51:47.362Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:51:47.366Z,1422575507.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:51:47.755Z,1422575507.755 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:51:47.770Z,1422575507.770 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:51:47.768Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:51:47.772Z,1422575507.772 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:51:47.771Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:51:47.775Z,1422575507.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:51:48.172Z,1422575508.172 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:51:48.215Z,1422575508.215 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:51:48.214Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:51:48.218Z,1422575508.218 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:51:48.216Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:51:48.220Z,1422575508.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:51:48.608Z,1422575508.608 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:51:48.641Z,1422575508.641 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:51:48.640Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:51:48.660Z,1422575508.660 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:51:48.659Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:51:48.667Z,1422575508.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:51:49.037Z,1422575509.037 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:51:49.078Z,1422575509.078 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:51:49.077Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:51:49.080Z,1422575509.080 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:51:49.079Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:51:49.083Z,1422575509.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:51:49.477Z,1422575509.477 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:51:49.492Z,1422575509.492 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:51:49.491Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:51:49.494Z,1422575509.494 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:51:49.493Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:51:49.520Z,1422575509.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:51:49.911Z,1422575509.911 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:51:49.942Z,1422575509.942 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:51:49.941Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:51:49.945Z,1422575509.945 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:51:49.943Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:51:49.947Z,1422575509.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:51:50.347Z,1422575510.347 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:51:50.378Z,1422575510.378 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:51:50.376Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:51:50.380Z,1422575510.380 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:51:50.379Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:51:50.382Z,1422575510.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:51:50.772Z,1422575510.772 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:51:50.804Z,1422575510.804 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:51:50.803Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:51:50.807Z,1422575510.807 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:51:50.805Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:51:50.809Z,1422575510.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:51:51.212Z,1422575511.212 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:51:51.738Z,1422575511.738 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:51:51.737Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:51:51.740Z,1422575511.740 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:51:51.739Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:51:51.743Z,1422575511.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:51:52.141Z,1422575512.141 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:51:52.192Z,1422575512.192 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:51:52.190Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:51:52.194Z,1422575512.194 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:51:52.193Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:51:52.197Z,1422575512.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:51:52.591Z,1422575512.591 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:51:52.607Z,1422575512.607 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:51:52.606Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:51:52.610Z,1422575512.610 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:51:52.609Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:51:52.612Z,1422575512.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:51:53.007Z,1422575513.007 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:51:53.140Z,1422575513.140 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:51:53.139Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:51:53.143Z,1422575513.143 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:51:53.141Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:51:53.145Z,1422575513.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:51:53.524Z,1422575513.524 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:51:53.552Z,1422575513.552 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:51:53.551Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:51:53.555Z,1422575513.555 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:51:53.553Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:51:53.557Z,1422575513.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:51:53.948Z,1422575513.948 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:51:54.015Z,1422575514.015 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:51:54.014Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:51:54.018Z,1422575514.018 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:51:54.016Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:51:54.020Z,1422575514.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:51:54.405Z,1422575514.405 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:51:54.421Z,1422575514.421 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:51:54.419Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:51:54.423Z,1422575514.423 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:51:54.422Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:51:54.425Z,1422575514.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:51:54.814Z,1422575514.814 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:51:54.891Z,1422575514.891 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:51:54.890Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:51:54.894Z,1422575514.894 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:51:54.893Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:51:54.896Z,1422575514.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:51:55.294Z,1422575515.294 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:51:55.846Z,1422575515.846 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:51:55.845Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:51:55.849Z,1422575515.849 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:51:55.847Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:51:55.851Z,1422575515.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:51:56.244Z,1422575516.244 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:51:56.325Z,1422575516.325 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:51:56.323Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:51:56.327Z,1422575516.327 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:51:56.326Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:51:56.329Z,1422575516.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:51:56.709Z,1422575516.709 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:51:56.725Z,1422575516.725 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:51:56.724Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:51:56.728Z,1422575516.728 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:51:56.726Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:51:56.730Z,1422575516.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:51:57.125Z,1422575517.125 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:51:57.159Z,1422575517.159 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:51:57.157Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:51:57.161Z,1422575517.161 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:51:57.160Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:51:57.164Z,1422575517.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:51:57.562Z,1422575517.562 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:51:57.605Z,1422575517.605 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:51:57.603Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:51:57.607Z,1422575517.607 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:51:57.606Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:51:57.609Z,1422575517.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:51:57.999Z,1422575517.999 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:51:58.032Z,1422575518.032 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:51:58.031Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:51:58.034Z,1422575518.034 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:51:58.033Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:51:58.037Z,1422575518.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:51:58.415Z,1422575518.415 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:51:58.430Z,1422575518.430 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:51:58.428Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:51:58.432Z,1422575518.432 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:51:58.431Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:51:58.434Z,1422575518.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:51:58.828Z,1422575518.828 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:51:58.842Z,1422575518.842 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:51:58.841Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:51:58.844Z,1422575518.844 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:51:58.843Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:51:58.871Z,1422575518.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:51:59.220Z,1422575519.220 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:51:59.265Z,1422575519.265 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:51:59.246Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:51:59.269Z,1422575519.269 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:51:59.266Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:51:59.271Z,1422575519.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:51:59.625Z,1422575519.625 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:51:59.678Z,1422575519.678 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:51:59.676Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:51:59.684Z,1422575519.684 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:51:59.679Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:51:59.687Z,1422575519.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:52:00.070Z,1422575520.070 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:52:00.097Z,1422575520.097 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:52:00.096Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:52:00.100Z,1422575520.100 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:52:00.098Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:52:00.124Z,1422575520.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:52:00.498Z,1422575520.498 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:52:01.029Z,1422575521.029 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:52:01.027Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:52:01.031Z,1422575521.031 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:52:01.030Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:52:01.034Z,1422575521.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:52:01.423Z,1422575521.423 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:52:01.464Z,1422575521.464 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:52:01.462Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:52:01.466Z,1422575521.466 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:52:01.465Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:52:01.479Z,1422575521.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:52:01.857Z,1422575521.857 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:52:01.872Z,1422575521.872 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:52:01.871Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:52:01.874Z,1422575521.874 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:52:01.873Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:52:01.877Z,1422575521.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:52:02.269Z,1422575522.269 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:52:02.323Z,1422575522.323 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:52:02.322Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:52:02.326Z,1422575522.326 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:52:02.325Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:52:02.328Z,1422575522.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:52:02.712Z,1422575522.712 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:52:02.786Z,1422575522.786 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:52:02.784Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:52:02.788Z,1422575522.788 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:52:02.787Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:52:02.790Z,1422575522.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:52:03.159Z,1422575523.159 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:52:03.187Z,1422575523.187 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:52:03.186Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:52:03.190Z,1422575523.190 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:52:03.188Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:52:03.192Z,1422575523.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:52:03.595Z,1422575523.595 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:52:03.610Z,1422575523.610 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:52:03.608Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:52:03.612Z,1422575523.612 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:52:03.611Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:52:03.631Z,1422575523.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:52:04.025Z,1422575524.025 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:52:04.039Z,1422575524.039 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:52:04.038Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:52:04.042Z,1422575524.042 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:52:04.040Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:52:04.044Z,1422575524.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:52:04.441Z,1422575524.441 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:52:04.456Z,1422575524.456 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:52:04.455Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:52:04.458Z,1422575524.458 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:52:04.457Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:52:04.461Z,1422575524.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:52:04.853Z,1422575524.853 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:52:04.899Z,1422575524.899 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:52:04.897Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:52:04.901Z,1422575524.901 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:52:04.900Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:52:04.904Z,1422575524.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:52:05.290Z,1422575525.290 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:52:05.816Z,1422575525.816 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:52:05.814Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:52:05.818Z,1422575525.818 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:52:05.817Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:52:05.820Z,1422575525.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:52:06.211Z,1422575526.211 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:52:06.293Z,1422575526.293 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:52:06.291Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:52:06.300Z,1422575526.300 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:52:06.298Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:52:06.307Z,1422575526.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:52:06.680Z,1422575526.680 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:52:06.706Z,1422575526.706 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:52:06.704Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:52:06.709Z,1422575526.709 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:52:06.708Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:52:06.711Z,1422575526.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:52:07.109Z,1422575527.109 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:52:07.155Z,1422575527.155 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:52:07.153Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:52:07.157Z,1422575527.157 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:52:07.156Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:52:07.159Z,1422575527.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:52:07.546Z,1422575527.546 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:52:07.580Z,1422575527.580 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:52:07.578Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:52:07.582Z,1422575527.582 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:52:07.581Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:52:07.585Z,1422575527.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:52:07.970Z,1422575527.970 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:52:08.059Z,1422575528.059 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:52:08.058Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:52:08.062Z,1422575528.062 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:52:08.061Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:52:08.064Z,1422575528.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:52:08.431Z,1422575528.431 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:52:08.480Z,1422575528.480 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:52:08.478Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:52:08.482Z,1422575528.482 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:52:08.481Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:52:08.485Z,1422575528.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:52:08.491Z,1422575528.491 [Default:UpdateAndReportMinutesSinceMissionStarted] Running Loop=1
2015-01-29T23:52:08.491Z,1422575528.491 [Default:UpdateAndReportMinutesSinceMissionStarted](INFO): Aggregate::initialize Default:UpdateAndReportMinutesSinceMissionStarted
2015-01-29T23:52:08.491Z,1422575528.491 [Default:UpdateAndReportMinutesSinceMissionStarted:A] Running Loop=1
2015-01-29T23:52:08.492Z,1422575528.492 [Default:UpdateAndReportMinutesSinceMissionStarted:A] Stopped
2015-01-29T23:52:08.492Z,1422575528.492 [Default:UpdateAndReportMinutesSinceMissionStarted:B] Running Loop=1
2015-01-29T23:52:08.875Z,1422575528.875 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:52:08.919Z,1422575528.919 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:52:08.917Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:52:08.921Z,1422575528.921 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:52:08.920Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:52:08.923Z,1422575528.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:52:08.930Z,1422575528.930 [Default:UpdateAndReportMinutesSinceMissionStarted:B](IMPORTANT): Default mission has been running for 6.917128 min 
2015-01-29T23:52:08.931Z,1422575528.931 [Default:UpdateAndReportMinutesSinceMissionStarted:B] Stopped
2015-01-29T23:52:08.931Z,1422575528.931 [Default:UpdateAndReportMinutesSinceMissionStarted](INFO): Completed Default:UpdateAndReportMinutesSinceMissionStarted
2015-01-29T23:52:08.931Z,1422575528.931 [Default:UpdateAndReportMinutesSinceMissionStarted] Stopped
2015-01-29T23:52:08.931Z,1422575528.931 [Default:UpdateAndReportMinutesSinceMissionStarted](INFO): Aggregate::uninitialize Default:UpdateAndReportMinutesSinceMissionStarted
2015-01-29T23:52:09.320Z,1422575529.320 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:52:09.899Z,1422575529.899 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:52:09.897Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:52:09.914Z,1422575529.914 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:52:09.913Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:52:09.917Z,1422575529.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:52:10.294Z,1422575530.294 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:52:10.325Z,1422575530.325 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:52:10.324Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:52:10.328Z,1422575530.328 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:52:10.326Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:52:10.330Z,1422575530.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:52:10.726Z,1422575530.726 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:52:10.776Z,1422575530.776 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:52:10.775Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:52:10.779Z,1422575530.779 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:52:10.778Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:52:10.781Z,1422575530.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:52:11.175Z,1422575531.175 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:52:11.242Z,1422575531.242 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:52:11.241Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:52:11.244Z,1422575531.244 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:52:11.243Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:52:11.247Z,1422575531.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:52:11.625Z,1422575531.625 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:52:11.670Z,1422575531.670 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:52:11.669Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:52:11.673Z,1422575531.673 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:52:11.671Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:52:11.675Z,1422575531.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:52:12.062Z,1422575532.062 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:52:12.094Z,1422575532.094 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:52:12.092Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:52:12.096Z,1422575532.096 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:52:12.095Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:52:12.098Z,1422575532.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:52:12.493Z,1422575532.493 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:52:12.518Z,1422575532.518 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:52:12.517Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:52:12.521Z,1422575532.521 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:52:12.520Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:52:12.523Z,1422575532.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:52:12.914Z,1422575532.914 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:52:12.946Z,1422575532.946 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:52:12.944Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:52:12.948Z,1422575532.948 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:52:12.947Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:52:12.966Z,1422575532.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:52:13.350Z,1422575533.350 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:52:13.378Z,1422575533.378 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:52:13.376Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:52:13.380Z,1422575533.380 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:52:13.379Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:52:13.382Z,1422575533.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:52:13.771Z,1422575533.771 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:52:13.799Z,1422575533.799 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:52:13.797Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:52:13.801Z,1422575533.801 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:52:13.800Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:52:13.803Z,1422575533.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:52:14.192Z,1422575534.192 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:52:14.723Z,1422575534.723 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:52:14.722Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:52:14.725Z,1422575534.725 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:52:14.724Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:52:14.728Z,1422575534.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:52:15.110Z,1422575535.110 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:52:15.154Z,1422575535.154 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:52:15.153Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:52:15.157Z,1422575535.157 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:52:15.156Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:52:15.159Z,1422575535.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:52:15.538Z,1422575535.538 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:52:15.552Z,1422575535.552 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:52:15.551Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:52:15.554Z,1422575535.554 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:52:15.553Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:52:15.557Z,1422575535.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:52:15.942Z,1422575535.942 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:52:16.006Z,1422575536.006 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:52:16.005Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:52:16.009Z,1422575536.009 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:52:16.007Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:52:16.017Z,1422575536.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:52:16.395Z,1422575536.395 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:52:16.445Z,1422575536.445 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:52:16.443Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:52:16.447Z,1422575536.447 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:52:16.446Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:52:16.450Z,1422575536.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:52:16.833Z,1422575536.833 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:52:16.865Z,1422575536.865 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:52:16.864Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:52:16.868Z,1422575536.868 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:52:16.866Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:52:16.870Z,1422575536.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:52:17.269Z,1422575537.269 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:52:17.299Z,1422575537.299 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:52:17.298Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:52:17.302Z,1422575537.302 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:52:17.300Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:52:17.304Z,1422575537.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:52:17.687Z,1422575537.687 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:52:17.706Z,1422575537.706 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:52:17.705Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:52:17.709Z,1422575537.709 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:52:17.707Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:52:17.711Z,1422575537.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:52:18.106Z,1422575538.106 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:52:18.148Z,1422575538.148 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:52:18.147Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:52:18.151Z,1422575538.151 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:52:18.149Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:52:18.153Z,1422575538.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:52:18.542Z,1422575538.542 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:52:19.073Z,1422575539.073 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:52:19.071Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:52:19.075Z,1422575539.075 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:52:19.074Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:52:19.077Z,1422575539.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:52:19.486Z,1422575539.486 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:52:19.569Z,1422575539.569 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:52:19.568Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:52:19.572Z,1422575539.572 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:52:19.570Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:52:19.574Z,1422575539.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:52:19.964Z,1422575539.964 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:52:19.980Z,1422575539.980 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:52:19.979Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:52:19.983Z,1422575539.983 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:52:19.981Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:52:19.985Z,1422575539.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:52:20.373Z,1422575540.373 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:52:20.418Z,1422575540.418 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:52:20.417Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:52:20.421Z,1422575540.421 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:52:20.419Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:52:20.423Z,1422575540.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:52:20.810Z,1422575540.810 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:52:20.811Z,1422575540.811 [NAL9602](FAULT): GPS failed to acquire within timeout.
2015-01-29T23:52:20.811Z,1422575540.811 [NAL9602] Data Fault, FailCount= 1
2015-01-29T23:52:20.811Z,1422575540.811 [NAL9602](ERROR): Data Fault
2015-01-29T23:52:20.825Z,1422575540.825 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:52:20.824Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:52:20.827Z,1422575540.827 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:52:20.826Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:52:20.830Z,1422575540.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:52:20.867Z,1422575540.867 [CBIT](ERROR): Data Fault in component: NAL9602
2015-01-29T23:52:21.226Z,1422575541.226 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:52:21.227Z,1422575541.227 [NAL9602](INFO): Powering down
2015-01-29T23:52:21.242Z,1422575541.242 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:52:21.240Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:52:21.244Z,1422575541.244 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:52:21.243Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:52:21.272Z,1422575541.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:52:21.639Z,1422575541.639 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:52:21.662Z,1422575541.662 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:52:21.660Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:52:21.664Z,1422575541.664 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:52:21.663Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:52:21.667Z,1422575541.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:52:22.056Z,1422575542.056 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:52:22.071Z,1422575542.071 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:52:22.069Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:52:22.073Z,1422575542.073 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:52:22.072Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:52:22.076Z,1422575542.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:52:22.092Z,1422575542.092 [CBIT](INFO): Clearing failed state for component NAL9602
2015-01-29T23:52:22.092Z,1422575542.092 [NAL9602] No Fault, FailCount= 1
2015-01-29T23:52:22.476Z,1422575542.476 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:52:22.520Z,1422575542.520 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:52:22.519Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:52:22.522Z,1422575542.522 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:52:22.521Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:52:22.528Z,1422575542.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:52:22.889Z,1422575542.889 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:52:22.931Z,1422575542.931 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:52:22.930Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:52:22.933Z,1422575542.933 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:52:22.932Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:52:22.937Z,1422575542.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:52:23.330Z,1422575543.330 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:52:23.391Z,1422575543.391 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:52:23.390Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:52:23.394Z,1422575543.394 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:52:23.393Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:52:23.397Z,1422575543.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:52:23.782Z,1422575543.782 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:52:23.843Z,1422575543.843 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:52:23.842Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:52:23.846Z,1422575543.846 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:52:23.844Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:52:23.848Z,1422575543.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:52:24.227Z,1422575544.227 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:52:24.241Z,1422575544.241 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:52:24.240Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:52:24.244Z,1422575544.244 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:52:24.242Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:52:24.246Z,1422575544.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:52:24.640Z,1422575544.640 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:52:24.686Z,1422575544.686 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:52:24.684Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:52:24.688Z,1422575544.688 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:52:24.687Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:52:24.691Z,1422575544.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:52:25.088Z,1422575545.088 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:52:25.103Z,1422575545.103 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:52:25.102Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:52:25.106Z,1422575545.106 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:52:25.104Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:52:25.109Z,1422575545.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:52:25.492Z,1422575545.492 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:52:25.535Z,1422575545.535 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:52:25.534Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:52:25.538Z,1422575545.538 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:52:25.536Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:52:25.540Z,1422575545.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:52:25.942Z,1422575545.942 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:52:26.028Z,1422575546.028 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:52:26.026Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:52:26.030Z,1422575546.030 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:52:26.029Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:52:26.033Z,1422575546.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:52:26.426Z,1422575546.426 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:52:26.429Z,1422575546.429 [NAL9602](INFO): Powering up NAL9602
2015-01-29T23:52:26.443Z,1422575546.443 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:52:26.442Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:52:26.446Z,1422575546.446 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:52:26.444Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:52:26.448Z,1422575546.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:52:26.843Z,1422575546.843 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:52:26.857Z,1422575546.857 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:52:26.856Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:52:26.860Z,1422575546.860 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:52:26.858Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:52:26.862Z,1422575546.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:52:27.244Z,1422575547.244 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:52:27.259Z,1422575547.259 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:52:27.257Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:52:27.261Z,1422575547.261 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:52:27.260Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:52:27.279Z,1422575547.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:52:27.664Z,1422575547.664 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:52:27.687Z,1422575547.687 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:52:27.685Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:52:27.689Z,1422575547.689 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:52:27.688Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:52:27.691Z,1422575547.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:52:28.081Z,1422575548.081 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:52:28.095Z,1422575548.095 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:52:28.094Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:52:28.097Z,1422575548.097 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:52:28.096Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:52:28.100Z,1422575548.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:52:28.498Z,1422575548.498 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:52:28.512Z,1422575548.512 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:52:28.511Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:52:28.514Z,1422575548.514 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:52:28.513Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:52:28.537Z,1422575548.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:52:28.902Z,1422575548.902 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:52:28.916Z,1422575548.916 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:52:28.915Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:52:28.919Z,1422575548.919 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:52:28.917Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:52:28.943Z,1422575548.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:52:29.315Z,1422575549.315 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:52:29.353Z,1422575549.353 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:52:29.351Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:52:29.355Z,1422575549.355 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:52:29.354Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:52:29.357Z,1422575549.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:52:29.760Z,1422575549.760 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:52:29.792Z,1422575549.792 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:52:29.791Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:52:29.797Z,1422575549.797 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:52:29.793Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:52:29.800Z,1422575549.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:52:30.181Z,1422575550.181 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:52:30.195Z,1422575550.195 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:52:30.193Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:52:30.197Z,1422575550.197 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:52:30.196Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:52:30.199Z,1422575550.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:52:30.584Z,1422575550.584 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:52:30.598Z,1422575550.598 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:52:30.596Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:52:30.600Z,1422575550.600 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:52:30.599Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:52:30.602Z,1422575550.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:52:31.002Z,1422575551.002 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:52:31.017Z,1422575551.017 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:52:31.015Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:52:31.019Z,1422575551.019 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:52:31.018Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:52:31.022Z,1422575551.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:52:31.419Z,1422575551.419 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:52:31.447Z,1422575551.447 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:52:31.446Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:52:31.450Z,1422575551.450 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:52:31.448Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:52:31.452Z,1422575551.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:52:31.836Z,1422575551.836 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:52:31.866Z,1422575551.866 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:52:31.865Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:52:31.868Z,1422575551.868 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:52:31.867Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:52:31.871Z,1422575551.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:52:32.260Z,1422575552.260 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:52:32.274Z,1422575552.274 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:52:32.272Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:52:32.295Z,1422575552.295 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:52:32.276Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:52:32.297Z,1422575552.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:52:32.668Z,1422575552.668 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:52:32.728Z,1422575552.728 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:52:32.726Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:52:32.730Z,1422575552.730 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:52:32.729Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:52:32.732Z,1422575552.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:52:33.129Z,1422575553.129 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:52:33.159Z,1422575553.159 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:52:33.157Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:52:33.161Z,1422575553.161 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:52:33.160Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:52:33.164Z,1422575553.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:52:33.554Z,1422575553.554 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:52:33.568Z,1422575553.568 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:52:33.567Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:52:33.571Z,1422575553.571 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:52:33.569Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:52:33.573Z,1422575553.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:52:33.966Z,1422575553.966 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:52:33.980Z,1422575553.980 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:52:33.979Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:52:33.982Z,1422575553.982 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:52:33.981Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:52:33.985Z,1422575553.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:52:34.383Z,1422575554.383 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:52:34.409Z,1422575554.409 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:52:34.407Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:52:34.411Z,1422575554.411 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:52:34.410Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:52:34.413Z,1422575554.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:52:34.804Z,1422575554.804 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:52:34.818Z,1422575554.818 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:52:34.817Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:52:34.820Z,1422575554.820 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:52:34.819Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:52:34.823Z,1422575554.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:52:35.208Z,1422575555.208 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:52:35.222Z,1422575555.222 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:52:35.221Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:52:35.224Z,1422575555.224 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:52:35.223Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:52:35.227Z,1422575555.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:52:35.621Z,1422575555.621 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:52:35.635Z,1422575555.635 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:52:35.634Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:52:35.637Z,1422575555.637 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:52:35.636Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:52:35.640Z,1422575555.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:52:36.030Z,1422575556.030 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:52:36.092Z,1422575556.092 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:52:36.090Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:52:36.098Z,1422575556.098 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:52:36.097Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:52:36.105Z,1422575556.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:52:36.474Z,1422575556.474 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:52:36.490Z,1422575556.490 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:52:36.489Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:52:36.492Z,1422575556.492 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:52:36.491Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:52:36.495Z,1422575556.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:52:36.887Z,1422575556.887 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:52:36.928Z,1422575556.928 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:52:36.927Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:52:36.930Z,1422575556.930 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:52:36.929Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:52:36.933Z,1422575556.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:52:37.324Z,1422575557.324 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:52:37.325Z,1422575557.325 [NAL9602](INFO): NAL9602 initialized
2015-01-29T23:52:37.339Z,1422575557.339 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:52:37.337Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:52:37.341Z,1422575557.341 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:52:37.340Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:52:37.343Z,1422575557.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:52:37.740Z,1422575557.740 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:52:37.755Z,1422575557.755 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:52:37.753Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:52:37.757Z,1422575557.757 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:52:37.756Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:52:37.759Z,1422575557.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:52:38.145Z,1422575558.145 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:52:38.182Z,1422575558.182 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:52:38.180Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:52:38.184Z,1422575558.184 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:52:38.183Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:52:38.186Z,1422575558.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:52:38.578Z,1422575558.578 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:52:38.648Z,1422575558.648 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:52:38.642Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:52:38.650Z,1422575558.650 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:52:38.649Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:52:38.657Z,1422575558.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:52:39.034Z,1422575559.034 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:52:39.064Z,1422575559.064 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:52:39.063Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:52:39.067Z,1422575559.067 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:52:39.065Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:52:39.098Z,1422575559.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:52:39.480Z,1422575559.480 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:52:39.497Z,1422575559.497 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:52:39.495Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:52:39.499Z,1422575559.499 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:52:39.498Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:52:39.502Z,1422575559.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:52:39.895Z,1422575559.895 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:52:39.942Z,1422575559.942 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:52:39.940Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:52:39.944Z,1422575559.944 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:52:39.943Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:52:39.947Z,1422575559.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:52:40.334Z,1422575560.334 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:52:40.858Z,1422575560.858 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:52:40.857Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:52:40.860Z,1422575560.860 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:52:40.859Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:52:40.863Z,1422575560.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:52:41.254Z,1422575561.254 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:52:41.286Z,1422575561.286 [BPC1](FAULT): Failed to receive battery data
2015-01-29T23:52:41.286Z,1422575561.286 [BPC1] Communications Fault, FailCount= 1
2015-01-29T23:52:41.287Z,1422575561.287 [BPC1](ERROR): Communications Fault
2015-01-29T23:52:41.296Z,1422575561.296 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:52:41.294Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:52:41.298Z,1422575561.298 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:52:41.297Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:52:41.300Z,1422575561.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:52:41.316Z,1422575561.316 [CBIT](ERROR): Communications Fault in component: BPC1
2015-01-29T23:52:41.698Z,1422575561.698 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:52:41.713Z,1422575561.713 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:52:41.712Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:52:41.716Z,1422575561.716 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:52:41.714Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:52:41.718Z,1422575561.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:52:42.103Z,1422575562.103 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:52:42.177Z,1422575562.177 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:52:42.176Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:52:42.184Z,1422575562.184 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:52:42.182Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:52:42.190Z,1422575562.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:52:42.589Z,1422575562.589 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:52:42.619Z,1422575562.619 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:52:42.618Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:52:42.621Z,1422575562.621 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:52:42.620Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:52:42.624Z,1422575562.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:52:42.668Z,1422575562.668 [CBIT](INFO): Clearing failed state for component BPC1
2015-01-29T23:52:42.668Z,1422575562.668 [BPC1] No Fault, FailCount= 1
2015-01-29T23:52:43.012Z,1422575563.012 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:52:43.106Z,1422575563.106 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:52:43.105Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:52:43.109Z,1422575563.109 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:52:43.108Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:52:43.112Z,1422575563.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:52:43.509Z,1422575563.509 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:52:43.559Z,1422575563.559 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:52:43.558Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:52:43.562Z,1422575563.562 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:52:43.560Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:52:43.564Z,1422575563.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:52:43.946Z,1422575563.946 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:52:43.974Z,1422575563.974 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:52:43.972Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:52:43.976Z,1422575563.976 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:52:43.974Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:52:43.978Z,1422575563.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:52:44.366Z,1422575564.366 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:52:44.381Z,1422575564.381 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:52:44.379Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:52:44.383Z,1422575564.383 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:52:44.382Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:52:44.386Z,1422575564.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:52:44.775Z,1422575564.775 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:52:45.306Z,1422575565.306 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:52:45.305Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:52:45.308Z,1422575565.308 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:52:45.307Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:52:45.311Z,1422575565.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:52:45.701Z,1422575565.701 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:52:45.786Z,1422575565.786 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:52:45.785Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:52:45.788Z,1422575565.788 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:52:45.787Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:52:45.790Z,1422575565.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:52:46.173Z,1422575566.173 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:52:46.190Z,1422575566.190 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:52:46.188Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:52:46.212Z,1422575566.212 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:52:46.190Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:52:46.214Z,1422575566.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:52:46.582Z,1422575566.582 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:52:46.618Z,1422575566.618 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:52:46.617Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:52:46.620Z,1422575566.620 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:52:46.619Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:52:46.623Z,1422575566.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:52:47.015Z,1422575567.015 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:52:47.042Z,1422575567.042 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:52:47.041Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:52:47.044Z,1422575567.044 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:52:47.043Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:52:47.069Z,1422575567.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:52:47.439Z,1422575567.439 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:52:47.473Z,1422575567.473 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:52:47.471Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:52:47.475Z,1422575567.475 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:52:47.474Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:52:47.477Z,1422575567.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:52:47.876Z,1422575567.876 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:52:47.890Z,1422575567.890 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:52:47.888Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:52:47.892Z,1422575567.892 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:52:47.891Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:52:47.894Z,1422575567.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:52:48.285Z,1422575568.285 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:52:48.316Z,1422575568.316 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:52:48.314Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:52:48.318Z,1422575568.318 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:52:48.317Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:52:48.320Z,1422575568.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:52:48.712Z,1422575568.712 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:52:48.747Z,1422575568.747 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:52:48.746Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:52:48.762Z,1422575568.762 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:52:48.760Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:52:48.768Z,1422575568.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:52:49.164Z,1422575569.164 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:52:49.193Z,1422575569.193 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:52:49.192Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:52:49.196Z,1422575569.196 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:52:49.194Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:52:49.198Z,1422575569.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:52:49.599Z,1422575569.599 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:52:50.132Z,1422575570.132 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:52:50.131Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:52:50.134Z,1422575570.134 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:52:50.133Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:52:50.137Z,1422575570.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:52:50.524Z,1422575570.524 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:52:50.557Z,1422575570.557 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:52:50.556Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:52:50.576Z,1422575570.576 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:52:50.574Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:52:50.578Z,1422575570.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:52:50.970Z,1422575570.970 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:52:50.984Z,1422575570.984 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:52:50.983Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:52:50.986Z,1422575570.986 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:52:50.985Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:52:50.989Z,1422575570.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:52:51.385Z,1422575571.385 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:52:51.431Z,1422575571.431 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:52:51.430Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:52:51.434Z,1422575571.434 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:52:51.432Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:52:51.436Z,1422575571.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:52:51.819Z,1422575571.819 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:52:51.884Z,1422575571.884 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:52:51.882Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:52:51.890Z,1422575571.890 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:52:51.889Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:52:51.897Z,1422575571.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:52:52.263Z,1422575572.263 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:52:52.292Z,1422575572.292 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:52:52.290Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:52:52.294Z,1422575572.294 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:52:52.293Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:52:52.296Z,1422575572.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:52:52.684Z,1422575572.684 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:52:52.699Z,1422575572.699 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:52:52.697Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:52:52.701Z,1422575572.701 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:52:52.700Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:52:52.703Z,1422575572.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:52:53.096Z,1422575573.096 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:52:53.112Z,1422575573.112 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:52:53.110Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:52:53.114Z,1422575573.114 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:52:53.113Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:52:53.116Z,1422575573.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:52:53.509Z,1422575573.509 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:52:53.537Z,1422575573.537 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:52:53.535Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:52:53.539Z,1422575573.539 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:52:53.538Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:52:53.552Z,1422575573.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:52:53.931Z,1422575573.931 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:52:53.957Z,1422575573.957 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:52:53.956Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:52:53.959Z,1422575573.959 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:52:53.958Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:52:53.962Z,1422575573.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:52:54.362Z,1422575574.362 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:52:54.892Z,1422575574.892 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:52:54.891Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:52:54.894Z,1422575574.894 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:52:54.893Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:52:54.897Z,1422575574.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:52:55.288Z,1422575575.288 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:52:55.373Z,1422575575.373 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:52:55.371Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:52:55.379Z,1422575575.379 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:52:55.378Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:52:55.381Z,1422575575.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:52:55.776Z,1422575575.776 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:52:55.826Z,1422575575.826 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:52:55.825Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:52:55.845Z,1422575575.845 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:52:55.843Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:52:55.851Z,1422575575.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:52:56.225Z,1422575576.225 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:52:56.253Z,1422575576.253 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:52:56.251Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:52:56.255Z,1422575576.255 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:52:56.254Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:52:56.257Z,1422575576.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:52:56.650Z,1422575576.650 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:52:56.701Z,1422575576.701 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:52:56.699Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:52:56.703Z,1422575576.703 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:52:56.701Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:52:56.705Z,1422575576.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:52:57.091Z,1422575577.091 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:52:57.164Z,1422575577.164 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:52:57.163Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:52:57.167Z,1422575577.167 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:52:57.165Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:52:57.169Z,1422575577.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:52:57.555Z,1422575577.555 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:52:57.569Z,1422575577.569 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:52:57.568Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:52:57.572Z,1422575577.572 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:52:57.570Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:52:57.574Z,1422575577.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:52:57.960Z,1422575577.960 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:52:58.010Z,1422575578.010 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:52:58.009Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:52:58.012Z,1422575578.012 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:52:58.011Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:52:58.015Z,1422575578.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:52:58.408Z,1422575578.408 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:52:58.498Z,1422575578.498 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:52:58.497Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:52:58.502Z,1422575578.502 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:52:58.500Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:52:58.504Z,1422575578.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:52:58.905Z,1422575578.905 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:52:58.951Z,1422575578.951 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:52:58.949Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:52:58.953Z,1422575578.953 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:52:58.952Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:52:58.956Z,1422575578.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:52:59.346Z,1422575579.346 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:52:59.876Z,1422575579.876 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:52:59.874Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:52:59.878Z,1422575579.878 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:52:59.877Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:52:59.880Z,1422575579.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:53:00.263Z,1422575580.263 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:53:00.309Z,1422575580.309 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:53:00.308Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:53:00.311Z,1422575580.311 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:53:00.310Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:53:00.314Z,1422575580.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:53:00.708Z,1422575580.708 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:53:00.723Z,1422575580.723 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:53:00.721Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:53:00.725Z,1422575580.725 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:53:00.724Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:53:00.727Z,1422575580.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:53:01.103Z,1422575581.103 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:53:01.151Z,1422575581.151 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:53:01.149Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:53:01.153Z,1422575581.153 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:53:01.152Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:53:01.155Z,1422575581.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:53:01.538Z,1422575581.538 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:53:01.611Z,1422575581.611 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:53:01.610Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:53:01.618Z,1422575581.618 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:53:01.616Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:53:01.624Z,1422575581.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:53:01.991Z,1422575581.991 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:53:02.018Z,1422575582.018 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:53:02.017Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:53:02.021Z,1422575582.021 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:53:02.019Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:53:02.023Z,1422575582.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:53:02.411Z,1422575582.411 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:53:02.431Z,1422575582.431 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:53:02.430Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:53:02.454Z,1422575582.454 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:53:02.432Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:53:02.456Z,1422575582.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:53:02.827Z,1422575582.827 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:53:02.860Z,1422575582.860 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:53:02.859Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:53:02.863Z,1422575582.863 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:53:02.862Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:53:02.865Z,1422575582.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:53:03.264Z,1422575583.264 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:53:03.278Z,1422575583.278 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:53:03.276Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:53:03.280Z,1422575583.280 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:53:03.279Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:53:03.282Z,1422575583.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:53:03.671Z,1422575583.671 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:53:04.202Z,1422575584.202 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:53:04.201Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:53:04.204Z,1422575584.204 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:53:04.203Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:53:04.207Z,1422575584.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:53:04.598Z,1422575584.598 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:53:04.691Z,1422575584.691 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:53:04.689Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:53:04.697Z,1422575584.697 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:53:04.692Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:53:04.700Z,1422575584.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:53:05.087Z,1422575585.087 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:53:05.117Z,1422575585.117 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:53:05.115Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:53:05.119Z,1422575585.119 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:53:05.118Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:53:05.122Z,1422575585.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:53:05.508Z,1422575585.508 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:53:05.535Z,1422575585.535 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:53:05.534Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:53:05.537Z,1422575585.537 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:53:05.536Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:53:05.540Z,1422575585.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:53:05.932Z,1422575585.932 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:53:05.977Z,1422575585.977 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:53:05.976Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:53:05.980Z,1422575585.980 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:53:05.979Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:53:05.982Z,1422575585.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:53:06.376Z,1422575586.376 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:53:06.419Z,1422575586.419 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:53:06.417Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:53:06.421Z,1422575586.421 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:53:06.420Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:53:06.424Z,1422575586.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:53:06.813Z,1422575586.813 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:53:06.828Z,1422575586.828 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:53:06.826Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:53:06.830Z,1422575586.830 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:53:06.829Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:53:06.833Z,1422575586.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:53:07.226Z,1422575587.226 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:53:07.241Z,1422575587.241 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:53:07.239Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:53:07.243Z,1422575587.243 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:53:07.242Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:53:07.246Z,1422575587.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:53:07.638Z,1422575587.638 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:53:07.704Z,1422575587.704 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:53:07.703Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:53:07.711Z,1422575587.711 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:53:07.709Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:53:07.717Z,1422575587.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:53:08.095Z,1422575588.095 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:53:08.140Z,1422575588.140 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:53:08.139Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:53:08.143Z,1422575588.143 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:53:08.141Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:53:08.145Z,1422575588.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:53:08.532Z,1422575588.532 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:53:09.058Z,1422575589.058 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:53:09.057Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:53:09.061Z,1422575589.061 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:53:09.060Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:53:09.079Z,1422575589.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:53:09.457Z,1422575589.457 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:53:09.489Z,1422575589.489 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:53:09.488Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:53:09.492Z,1422575589.492 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:53:09.490Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:53:09.494Z,1422575589.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:53:09.890Z,1422575589.890 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:53:09.905Z,1422575589.905 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:53:09.903Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:53:09.907Z,1422575589.907 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:53:09.906Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:53:09.910Z,1422575589.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:53:10.295Z,1422575590.295 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:53:10.340Z,1422575590.340 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:53:10.339Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:53:10.342Z,1422575590.342 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:53:10.341Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:53:10.345Z,1422575590.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:53:10.739Z,1422575590.739 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:53:10.846Z,1422575590.846 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:53:10.844Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:53:10.848Z,1422575590.848 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:53:10.847Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:53:10.850Z,1422575590.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:53:11.244Z,1422575591.244 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:53:11.289Z,1422575591.289 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:53:11.288Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:53:11.292Z,1422575591.292 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:53:11.291Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:53:11.294Z,1422575591.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:53:11.689Z,1422575591.689 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:53:11.703Z,1422575591.703 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:53:11.702Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:53:11.706Z,1422575591.706 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:53:11.704Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:53:11.708Z,1422575591.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:53:12.100Z,1422575592.100 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:53:12.131Z,1422575592.131 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:53:12.130Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:53:12.133Z,1422575592.133 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:53:12.132Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:53:12.135Z,1422575592.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:53:12.519Z,1422575592.519 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:53:12.534Z,1422575592.534 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:53:12.533Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:53:12.537Z,1422575592.537 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:53:12.535Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:53:12.539Z,1422575592.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:53:12.931Z,1422575592.931 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:53:12.959Z,1422575592.959 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:53:12.958Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:53:12.981Z,1422575592.981 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:53:12.960Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:53:12.983Z,1422575592.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:53:13.352Z,1422575593.352 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:53:13.877Z,1422575593.877 [BPC1](FAULT): Failed to receive battery data
2015-01-29T23:53:13.877Z,1422575593.877 [BPC1] Communications Fault, FailCount= 1
2015-01-29T23:53:13.877Z,1422575593.877 [BPC1](ERROR): Communications Fault
2015-01-29T23:53:13.887Z,1422575593.887 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:53:13.885Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:53:13.889Z,1422575593.889 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:53:13.888Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:53:13.891Z,1422575593.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:53:13.908Z,1422575593.908 [CBIT](ERROR): Communications Fault in component: BPC1
2015-01-29T23:53:14.277Z,1422575594.277 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:53:14.359Z,1422575594.359 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:53:14.357Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:53:14.365Z,1422575594.365 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:53:14.364Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:53:14.372Z,1422575594.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:53:14.753Z,1422575594.753 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:53:14.786Z,1422575594.786 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:53:14.784Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:53:14.792Z,1422575594.792 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:53:14.787Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:53:14.794Z,1422575594.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:53:15.175Z,1422575595.175 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:53:15.202Z,1422575595.202 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:53:15.200Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:53:15.204Z,1422575595.204 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:53:15.203Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:53:15.206Z,1422575595.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:53:15.250Z,1422575595.250 [CBIT](INFO): Clearing failed state for component BPC1
2015-01-29T23:53:15.250Z,1422575595.250 [BPC1] No Fault, FailCount= 1
2015-01-29T23:53:15.607Z,1422575595.607 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:53:15.697Z,1422575595.697 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:53:15.695Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:53:15.699Z,1422575595.699 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:53:15.698Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:53:15.702Z,1422575595.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:53:16.096Z,1422575596.096 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:53:16.181Z,1422575596.181 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:53:16.180Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:53:16.184Z,1422575596.184 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:53:16.183Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:53:16.187Z,1422575596.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:53:16.563Z,1422575596.563 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:53:16.588Z,1422575596.588 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:53:16.586Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:53:16.590Z,1422575596.590 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:53:16.589Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:53:16.593Z,1422575596.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:53:16.985Z,1422575596.985 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:53:17.001Z,1422575597.001 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:53:16.999Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:53:17.003Z,1422575597.003 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:53:17.002Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:53:17.005Z,1422575597.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:53:17.414Z,1422575597.414 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:53:17.458Z,1422575597.458 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:53:17.457Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:53:17.461Z,1422575597.461 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:53:17.459Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:53:17.463Z,1422575597.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:53:17.854Z,1422575597.854 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:53:17.899Z,1422575597.899 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:53:17.897Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:53:17.901Z,1422575597.901 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:53:17.900Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:53:17.903Z,1422575597.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:53:18.291Z,1422575598.291 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:53:18.822Z,1422575598.822 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:53:18.820Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:53:18.824Z,1422575598.824 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:53:18.823Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:53:18.843Z,1422575598.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:53:19.217Z,1422575599.217 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:53:19.249Z,1422575599.249 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:53:19.248Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:53:19.251Z,1422575599.251 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:53:19.250Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:53:19.254Z,1422575599.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:53:19.645Z,1422575599.645 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:53:19.660Z,1422575599.660 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:53:19.658Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:53:19.662Z,1422575599.662 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:53:19.661Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:53:19.665Z,1422575599.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:53:20.054Z,1422575600.054 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:53:20.100Z,1422575600.100 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:53:20.099Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:53:20.102Z,1422575600.102 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:53:20.101Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:53:20.105Z,1422575600.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:53:20.486Z,1422575600.486 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:53:20.554Z,1422575600.554 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:53:20.529Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:53:20.556Z,1422575600.556 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:53:20.555Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:53:20.559Z,1422575600.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:53:20.939Z,1422575600.939 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:53:20.967Z,1422575600.967 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:53:20.966Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:53:20.970Z,1422575600.970 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:53:20.968Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:53:20.972Z,1422575600.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:53:21.360Z,1422575601.360 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:53:21.375Z,1422575601.375 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:53:21.373Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:53:21.377Z,1422575601.377 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:53:21.376Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:53:21.379Z,1422575601.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:53:21.772Z,1422575601.772 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:53:21.787Z,1422575601.787 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:53:21.785Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:53:21.789Z,1422575601.789 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:53:21.788Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:53:21.791Z,1422575601.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:53:22.181Z,1422575602.181 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:53:22.226Z,1422575602.226 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:53:22.225Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:53:22.229Z,1422575602.229 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:53:22.228Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:53:22.231Z,1422575602.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:53:22.630Z,1422575602.630 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:53:23.162Z,1422575603.162 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:53:23.161Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:53:23.165Z,1422575603.165 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:53:23.163Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:53:23.167Z,1422575603.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:53:23.557Z,1422575603.557 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:53:23.647Z,1422575603.647 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:53:23.645Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:53:23.649Z,1422575603.649 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:53:23.648Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:53:23.662Z,1422575603.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:53:24.012Z,1422575604.012 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:53:24.028Z,1422575604.028 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:53:24.027Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:53:24.031Z,1422575604.031 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:53:24.029Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:53:24.034Z,1422575604.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:53:24.428Z,1422575604.428 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:53:24.475Z,1422575604.475 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:53:24.473Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:53:24.477Z,1422575604.477 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:53:24.476Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:53:24.480Z,1422575604.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:53:24.866Z,1422575604.866 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:53:24.893Z,1422575604.893 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:53:24.891Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:53:24.895Z,1422575604.895 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:53:24.894Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:53:24.898Z,1422575604.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:53:25.282Z,1422575605.282 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:53:25.325Z,1422575605.325 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:53:25.323Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:53:25.327Z,1422575605.327 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:53:25.325Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:53:25.329Z,1422575605.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:53:25.719Z,1422575605.719 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:53:25.733Z,1422575605.733 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:53:25.732Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:53:25.735Z,1422575605.735 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:53:25.734Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:53:25.738Z,1422575605.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:53:26.135Z,1422575606.135 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:53:26.150Z,1422575606.150 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:53:26.149Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:53:26.152Z,1422575606.152 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:53:26.151Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:53:26.155Z,1422575606.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:53:26.565Z,1422575606.565 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:53:26.597Z,1422575606.597 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:53:26.595Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:53:26.599Z,1422575606.599 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:53:26.598Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:53:26.602Z,1422575606.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:53:27.008Z,1422575607.008 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:53:27.037Z,1422575607.037 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:53:27.035Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:53:27.039Z,1422575607.039 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:53:27.038Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:53:27.041Z,1422575607.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:53:27.433Z,1422575607.433 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:53:27.959Z,1422575607.959 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:53:27.958Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:53:27.962Z,1422575607.962 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:53:27.960Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:53:27.964Z,1422575607.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:53:28.372Z,1422575608.372 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:53:28.453Z,1422575608.453 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:53:28.451Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:53:28.455Z,1422575608.455 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:53:28.454Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:53:28.458Z,1422575608.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:53:28.851Z,1422575608.851 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:53:28.901Z,1422575608.901 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:53:28.899Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:53:28.903Z,1422575608.903 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:53:28.901Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:53:28.905Z,1422575608.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:53:29.284Z,1422575609.284 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:53:29.334Z,1422575609.334 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:53:29.332Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:53:29.340Z,1422575609.340 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:53:29.339Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:53:29.342Z,1422575609.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:53:29.729Z,1422575609.729 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:53:29.818Z,1422575609.818 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:53:29.817Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:53:29.825Z,1422575609.825 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:53:29.824Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:53:29.832Z,1422575609.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:53:30.205Z,1422575610.205 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:53:30.268Z,1422575610.268 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:53:30.266Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:53:30.270Z,1422575610.270 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:53:30.269Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:53:30.285Z,1422575610.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:53:30.666Z,1422575610.666 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:53:30.692Z,1422575610.692 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:53:30.691Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:53:30.695Z,1422575610.695 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:53:30.693Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:53:30.697Z,1422575610.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:53:31.087Z,1422575611.087 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:53:31.148Z,1422575611.148 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:53:31.147Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:53:31.151Z,1422575611.151 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:53:31.149Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:53:31.153Z,1422575611.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:53:31.551Z,1422575611.551 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:53:31.594Z,1422575611.594 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:53:31.593Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:53:31.596Z,1422575611.596 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:53:31.595Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:53:31.599Z,1422575611.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:53:32.000Z,1422575612.000 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:53:32.044Z,1422575612.044 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:53:32.042Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:53:32.046Z,1422575612.046 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:53:32.045Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:53:32.049Z,1422575612.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:53:32.438Z,1422575612.438 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:53:32.967Z,1422575612.967 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:53:32.966Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:53:32.970Z,1422575612.970 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:53:32.968Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:53:32.972Z,1422575612.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:53:33.379Z,1422575613.379 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:53:33.461Z,1422575613.461 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:53:33.460Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:53:33.464Z,1422575613.464 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:53:33.462Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:53:33.466Z,1422575613.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:53:33.839Z,1422575613.839 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:53:33.855Z,1422575613.855 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:53:33.854Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:53:33.858Z,1422575613.858 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:53:33.856Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:53:33.860Z,1422575613.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:53:34.264Z,1422575614.264 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:53:34.310Z,1422575614.310 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:53:34.308Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:53:34.312Z,1422575614.312 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:53:34.311Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:53:34.315Z,1422575614.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:53:34.705Z,1422575614.705 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:53:34.747Z,1422575614.747 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:53:34.745Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:53:34.749Z,1422575614.749 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:53:34.748Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:53:34.751Z,1422575614.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:53:35.134Z,1422575615.134 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:53:35.167Z,1422575615.167 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:53:35.165Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:53:35.169Z,1422575615.169 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:53:35.168Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:53:35.172Z,1422575615.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:53:35.570Z,1422575615.570 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:53:35.600Z,1422575615.600 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:53:35.598Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:53:35.602Z,1422575615.602 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:53:35.601Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:53:35.605Z,1422575615.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:53:35.991Z,1422575615.991 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:53:36.006Z,1422575616.006 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:53:36.005Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:53:36.008Z,1422575616.008 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:53:36.007Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:53:36.011Z,1422575616.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:53:36.399Z,1422575616.399 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:53:36.448Z,1422575616.448 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:53:36.447Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:53:36.455Z,1422575616.455 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:53:36.453Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:53:36.457Z,1422575616.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:53:36.828Z,1422575616.828 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:53:36.856Z,1422575616.856 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:53:36.855Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:53:36.858Z,1422575616.858 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:53:36.857Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:53:36.861Z,1422575616.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:53:37.261Z,1422575617.261 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:53:37.795Z,1422575617.795 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:53:37.794Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:53:37.798Z,1422575617.798 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:53:37.797Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:53:37.801Z,1422575617.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:53:38.191Z,1422575618.191 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:53:38.227Z,1422575618.227 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:53:38.226Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:53:38.230Z,1422575618.230 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:53:38.228Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:53:38.232Z,1422575618.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:53:38.622Z,1422575618.622 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:53:38.651Z,1422575618.651 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:53:38.650Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:53:38.653Z,1422575618.653 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:53:38.652Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:53:38.656Z,1422575618.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:53:39.040Z,1422575619.040 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:53:39.073Z,1422575619.073 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:53:39.071Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:53:39.075Z,1422575619.075 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:53:39.074Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:53:39.078Z,1422575619.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:53:39.476Z,1422575619.476 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:53:39.548Z,1422575619.548 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:53:39.547Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:53:39.555Z,1422575619.555 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:53:39.549Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:53:39.557Z,1422575619.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:53:39.944Z,1422575619.944 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:53:39.980Z,1422575619.980 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:53:39.979Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:53:39.983Z,1422575619.983 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:53:39.981Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:53:39.985Z,1422575619.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:53:40.373Z,1422575620.373 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:53:40.388Z,1422575620.388 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:53:40.387Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:53:40.391Z,1422575620.391 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:53:40.389Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:53:40.393Z,1422575620.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:53:40.782Z,1422575620.782 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:53:40.797Z,1422575620.797 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:53:40.796Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:53:40.800Z,1422575620.800 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:53:40.798Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:53:40.802Z,1422575620.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:53:41.186Z,1422575621.186 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:53:41.228Z,1422575621.228 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:53:41.226Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:53:41.230Z,1422575621.230 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:53:41.228Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:53:41.232Z,1422575621.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:53:41.620Z,1422575621.620 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:53:42.145Z,1422575622.145 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:53:42.144Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:53:42.148Z,1422575622.148 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:53:42.146Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:53:42.150Z,1422575622.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:53:42.537Z,1422575622.537 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:53:42.602Z,1422575622.602 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:53:42.601Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:53:42.605Z,1422575622.605 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:53:42.603Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:53:42.607Z,1422575622.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:53:43.005Z,1422575623.005 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:53:43.014Z,1422575623.014 [BPC1](ERROR): A bank expecting battery number:1 and read number: uart read:X
$S,01,270F,02,00,04,59%2B
$C1,01,FF,02,FF,03,00,04,00,05,FF,06,00,07,00%72
$B11,0A,05A0%47
$B12,0A,0593%3F
$B13,0A,0579%3A
$B14,0A,0597%3D
$B15,0A,064D%41
$B16,0A,063F%47
$B17,0A,05ED%31
$B18,0A,061D%49
$S,01,270F,02,00,04,59%2B
$C1,01,FF,02,FF,03,00,04,00,05,FF,06,00,07,00%72
$B11,02,000A,01,02A8,03,0001,08,0BA7,09,4058,0A,05A0,0B,059D%4A
$B11,0C,0001,0D,0059,0E,0053,0F,1600,10,18E0,11,FFFF,12,FFFF%34
$B11,13,003D,14,0BB8,15,41A0,16,0080,17,0001,18,1A90,19,3840%35
$B11,1A,0031,1B,458B,1C,0095%46
$B12,02,000A,01,02A8,03,0001,08,0B97,09,4054,0A,0593,0B,0590%32
$B12,0C,0001,0D,0059,0E,0055,0F,1693,10,196C,11,FFFF,12,FFFF%3A
$B12,13,003D,14,0BB8,15,41A0,16,0080,17,0001,18,1A90,19,3840%36
$B12,1A,0031,1B,458B,1C,00BE%4E
$B13,02,000A,01,02A8,03,0001,08,0B97,09,4049,0A,0579,0B,0575%30
$B13,0C,0001,0D,0059,0E,0054,0F,160D,10,18FC,11,FFFF,12,FFFF%35
$B13,13,0041,14,0BB8,15,41A0,16,0080,17,0001,18,1A90,19,3840%45
$B13,1A,0031,1B,458B,1C,0086%46
$B14,02,000A,01,02A8,03,0001,08,0B97,09,4048,0A,0596,0B,0594%38
$B14,0C,0001,0D,0059,0E,0054,0F,1614,10,18F1,11,FFFF,12,FFFF%31
$B14,13,003E,14,0BB8,15,41A0,16,0080,17,0001,18,1A90,19,3840%31
$B14,1A,0031,1B,458B,1C,00AE%4B
$B15,02,000A,01,02A8,03,0001,08,0B98,09,4090,0A,064C,0B,0649%4B
$B15,0C,0001,0D,005A,0E,0057,0F,16F9,10,19BB,11,FFFF,12,FFFF%47
$B15,13,0038,14,0BB8,15,41A0,16,0080,17,0001,18,1A90,19,3840%4D
$B15,1A,0031,1B,458C,1C,00CB%4E
$B16,02,000A,01,02A8,03,0001,08,0B93,09,4099,0A,063E,0B,063B%37
$B16,0C,0001,0D,005A,0E,0055,0F,1694,10,1947,11,FFFF,12,FFFF%37
$B16,13,0037,14,0BB8,15,41A0,16,0080,17,0001,18,1A90,19,3840%41
$B16,1A,0031,1B,458C,1C,00F7%3D
$B17,02,000A,01,02A8,03,0001,08,0B96,09,406A,0A,05ED,0B,05EA%46
$B17,0C,0001,0D,0059,0E,0054,0F,1615,10,18F1,11,FFFF,12,FFFF%33
$B17,13,003A,14,0BB8,15,41A0,16,0080,17,0001,18,1A90,19,3840%36
$B17,1A,0031,1B,458B,1C,00A1%3C
$B18,02,000A,01,02A8,03,0001,08,0B91,09,4067,0A,061C,0B,061B%3C
$B18,0C,0001,0D,0059,0E,0054,0F,1638,10,190E,11,FFFF,12,FFFF%30
$B18,13,0038,14,0BB8,15,41A0,16,0080,17,0001,18,1A90,19,3840%40
$B18,1A,0031,1B,458C,1C,00F0%34

2015-01-29T23:53:43.014Z,1422575623.014 [BPC1](FAULT): Failed to parse bank A battery data
2015-01-29T23:53:43.015Z,1422575623.015 [BPC1] Data Fault, FailCount= 1
2015-01-29T23:53:43.015Z,1422575623.015 [BPC1](ERROR): Data Fault
2015-01-29T23:53:43.056Z,1422575623.056 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:53:43.051Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:53:43.058Z,1422575623.058 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:53:43.057Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:53:43.061Z,1422575623.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:53:43.077Z,1422575623.077 [CBIT](ERROR): Data Fault in component: BPC1
2015-01-29T23:53:43.446Z,1422575623.446 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:53:43.506Z,1422575623.506 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:53:43.504Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:53:43.508Z,1422575623.508 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:53:43.507Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:53:43.511Z,1422575623.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:53:43.887Z,1422575623.887 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:53:43.924Z,1422575623.924 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:53:43.922Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:53:43.926Z,1422575623.926 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:53:43.925Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:53:43.928Z,1422575623.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:53:44.315Z,1422575624.315 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:53:44.361Z,1422575624.361 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:53:44.360Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:53:44.363Z,1422575624.363 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:53:44.362Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:53:44.366Z,1422575624.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:53:44.382Z,1422575624.382 [CBIT](INFO): Clearing failed state for component BPC1
2015-01-29T23:53:44.382Z,1422575624.382 [BPC1] No Fault, FailCount= 1
2015-01-29T23:53:44.748Z,1422575624.748 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:53:44.807Z,1422575624.807 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:53:44.806Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:53:44.809Z,1422575624.809 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:53:44.808Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:53:44.812Z,1422575624.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:53:45.205Z,1422575625.205 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:53:45.262Z,1422575625.262 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:53:45.261Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:53:45.265Z,1422575625.265 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:53:45.263Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:53:45.267Z,1422575625.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:53:45.653Z,1422575625.653 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:53:45.685Z,1422575625.685 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:53:45.683Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:53:45.687Z,1422575625.687 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:53:45.686Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:53:45.689Z,1422575625.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:53:46.093Z,1422575626.093 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:53:46.123Z,1422575626.123 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:53:46.122Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:53:46.126Z,1422575626.126 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:53:46.124Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:53:46.128Z,1422575626.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:53:46.519Z,1422575626.519 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:53:47.045Z,1422575627.045 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:53:47.043Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:53:47.047Z,1422575627.047 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:53:47.046Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:53:47.049Z,1422575627.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:53:47.441Z,1422575627.441 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:53:47.478Z,1422575627.478 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:53:47.476Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:53:47.480Z,1422575627.480 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:53:47.479Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:53:47.483Z,1422575627.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:53:47.877Z,1422575627.877 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:53:47.892Z,1422575627.892 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:53:47.890Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:53:47.894Z,1422575627.894 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:53:47.893Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:53:47.896Z,1422575627.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:53:48.282Z,1422575628.282 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:53:48.323Z,1422575628.323 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:53:48.322Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:53:48.326Z,1422575628.326 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:53:48.324Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:53:48.328Z,1422575628.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:53:48.712Z,1422575628.712 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:53:48.776Z,1422575628.776 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:53:48.774Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:53:48.782Z,1422575628.782 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:53:48.781Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:53:48.789Z,1422575628.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:53:49.151Z,1422575629.151 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:53:49.179Z,1422575629.179 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:53:49.178Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:53:49.182Z,1422575629.182 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:53:49.180Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:53:49.184Z,1422575629.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:53:49.584Z,1422575629.584 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:53:49.598Z,1422575629.598 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:53:49.596Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:53:49.600Z,1422575629.600 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:53:49.599Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:53:49.602Z,1422575629.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:53:49.988Z,1422575629.988 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:53:50.003Z,1422575630.003 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:53:50.002Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:53:50.006Z,1422575630.006 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:53:50.004Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:53:50.024Z,1422575630.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:53:50.401Z,1422575630.401 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:53:50.430Z,1422575630.430 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:53:50.429Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:53:50.432Z,1422575630.432 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:53:50.431Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:53:50.435Z,1422575630.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:53:50.821Z,1422575630.821 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:53:50.849Z,1422575630.849 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:53:50.847Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:53:50.851Z,1422575630.851 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:53:50.850Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:53:50.854Z,1422575630.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:53:51.242Z,1422575631.242 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:53:51.773Z,1422575631.773 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:53:51.771Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:53:51.775Z,1422575631.775 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:53:51.774Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:53:51.777Z,1422575631.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:53:52.169Z,1422575632.169 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:53:52.249Z,1422575632.249 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:53:52.248Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:53:52.255Z,1422575632.255 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:53:52.254Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:53:52.258Z,1422575632.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:53:52.652Z,1422575632.652 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:53:52.682Z,1422575632.682 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:53:52.680Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:53:52.685Z,1422575632.685 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:53:52.683Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:53:52.687Z,1422575632.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:53:53.074Z,1422575633.074 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:53:53.110Z,1422575633.110 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:53:53.109Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:53:53.113Z,1422575633.113 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:53:53.111Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:53:53.115Z,1422575633.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:53:53.510Z,1422575633.510 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:53:53.551Z,1422575633.551 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:53:53.550Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:53:53.554Z,1422575633.554 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:53:53.552Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:53:53.556Z,1422575633.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:53:53.954Z,1422575633.954 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:53:53.992Z,1422575633.992 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:53:53.990Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:53:53.994Z,1422575633.994 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:53:53.993Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:53:53.997Z,1422575633.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:53:54.391Z,1422575634.391 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:53:54.406Z,1422575634.406 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:53:54.404Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:53:54.408Z,1422575634.408 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:53:54.407Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:53:54.410Z,1422575634.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:53:54.800Z,1422575634.800 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:53:54.815Z,1422575634.815 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:53:54.814Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:53:54.818Z,1422575634.818 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:53:54.816Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:53:54.836Z,1422575634.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:53:55.211Z,1422575635.211 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:53:55.282Z,1422575635.282 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:53:55.281Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:53:55.285Z,1422575635.285 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:53:55.283Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:53:55.287Z,1422575635.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:53:55.689Z,1422575635.689 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:53:56.215Z,1422575636.215 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:53:56.214Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:53:56.217Z,1422575636.217 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:53:56.216Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:53:56.220Z,1422575636.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:53:56.614Z,1422575636.614 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:53:56.644Z,1422575636.644 [BPC1](ERROR): A bank expecting battery number:1 and read number: uart read:
2015-01-29T23:53:56.644Z,1422575636.644 [BPC1](FAULT): Failed to parse bank A battery data
2015-01-29T23:53:56.644Z,1422575636.644 [BPC1] Data Fault, FailCount= 2
2015-01-29T23:53:56.644Z,1422575636.644 [BPC1](ERROR): Data Fault
2015-01-29T23:53:56.655Z,1422575636.655 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:53:56.654Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:53:56.658Z,1422575636.658 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:53:56.656Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:53:56.660Z,1422575636.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:53:56.697Z,1422575636.697 [CBIT](ERROR): Data Fault in component: BPC1
2015-01-29T23:53:57.060Z,1422575637.060 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:53:57.077Z,1422575637.077 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:53:57.075Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:53:57.079Z,1422575637.079 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:53:57.078Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:53:57.081Z,1422575637.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:53:57.492Z,1422575637.492 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:53:57.520Z,1422575637.520 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:53:57.519Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:53:57.522Z,1422575637.522 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:53:57.521Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:53:57.525Z,1422575637.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:53:57.909Z,1422575637.909 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:53:57.952Z,1422575637.952 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:53:57.950Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:53:57.954Z,1422575637.954 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:53:57.953Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:53:57.956Z,1422575637.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:53:57.973Z,1422575637.973 [CBIT](INFO): Clearing failed state for component BPC1
2015-01-29T23:53:57.973Z,1422575637.973 [BPC1] No Fault, FailCount= 2
2015-01-29T23:53:58.345Z,1422575638.345 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:53:58.493Z,1422575638.493 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:53:58.491Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:53:58.495Z,1422575638.495 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:53:58.494Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:53:58.497Z,1422575638.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:53:58.898Z,1422575638.898 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:53:58.950Z,1422575638.950 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:53:58.948Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:53:58.952Z,1422575638.952 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:53:58.951Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:53:58.954Z,1422575638.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:53:59.347Z,1422575639.347 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:53:59.361Z,1422575639.361 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:53:59.360Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:53:59.364Z,1422575639.364 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:53:59.362Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:53:59.366Z,1422575639.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:53:59.759Z,1422575639.759 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:53:59.775Z,1422575639.775 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:53:59.773Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:53:59.777Z,1422575639.777 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:53:59.776Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:53:59.779Z,1422575639.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:54:00.172Z,1422575640.172 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:54:00.217Z,1422575640.217 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:54:00.216Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:54:00.220Z,1422575640.220 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:54:00.218Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:54:00.222Z,1422575640.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:54:00.609Z,1422575640.609 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:54:01.135Z,1422575641.135 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:54:01.133Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:54:01.137Z,1422575641.137 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:54:01.136Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:54:01.139Z,1422575641.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:54:01.525Z,1422575641.525 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:54:01.600Z,1422575641.600 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:54:01.599Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:54:01.602Z,1422575641.602 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:54:01.601Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:54:01.605Z,1422575641.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:54:02.002Z,1422575642.002 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:54:02.018Z,1422575642.018 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:54:02.017Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:54:02.020Z,1422575642.020 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:54:02.019Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:54:02.023Z,1422575642.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:54:02.407Z,1422575642.407 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:54:02.441Z,1422575642.441 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:54:02.439Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:54:02.459Z,1422575642.459 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:54:02.458Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:54:02.461Z,1422575642.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:54:02.844Z,1422575642.844 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:54:02.877Z,1422575642.877 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:54:02.875Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:54:02.879Z,1422575642.879 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:54:02.878Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:54:02.881Z,1422575642.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:54:03.273Z,1422575643.273 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:54:03.323Z,1422575643.323 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:54:03.321Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:54:03.325Z,1422575643.325 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:54:03.324Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:54:03.328Z,1422575643.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:54:03.710Z,1422575643.710 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:54:03.725Z,1422575643.725 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:54:03.723Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:54:03.727Z,1422575643.727 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:54:03.726Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:54:03.730Z,1422575643.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:54:04.113Z,1422575644.113 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:54:04.127Z,1422575644.127 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:54:04.126Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:54:04.130Z,1422575644.130 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:54:04.128Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:54:04.132Z,1422575644.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:54:04.530Z,1422575644.530 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:54:04.549Z,1422575644.549 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:54:04.547Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:54:04.551Z,1422575644.551 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:54:04.550Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:54:04.570Z,1422575644.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:54:04.939Z,1422575644.939 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:54:05.005Z,1422575645.005 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:54:05.003Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:54:05.007Z,1422575645.007 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:54:05.006Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:54:05.009Z,1422575645.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:54:05.383Z,1422575645.383 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:54:05.906Z,1422575645.906 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:54:05.904Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:54:05.909Z,1422575645.909 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:54:05.907Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:54:05.911Z,1422575645.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:54:06.301Z,1422575646.301 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:54:06.344Z,1422575646.344 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:54:06.343Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:54:06.347Z,1422575646.347 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:54:06.345Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:54:06.349Z,1422575646.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:54:06.742Z,1422575646.742 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:54:06.756Z,1422575646.756 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:54:06.755Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:54:06.759Z,1422575646.759 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:54:06.757Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:54:06.761Z,1422575646.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:54:07.163Z,1422575647.163 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:54:07.204Z,1422575647.204 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:54:07.203Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:54:07.207Z,1422575647.207 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:54:07.205Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:54:07.209Z,1422575647.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:54:07.603Z,1422575647.603 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:54:07.648Z,1422575647.648 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:54:07.647Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:54:07.651Z,1422575647.651 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:54:07.649Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:54:07.653Z,1422575647.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:54:08.037Z,1422575648.037 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:54:08.110Z,1422575648.110 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:54:08.108Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:54:08.112Z,1422575648.112 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:54:08.111Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:54:08.114Z,1422575648.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:54:08.513Z,1422575648.513 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:54:08.542Z,1422575648.542 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:54:08.540Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:54:08.544Z,1422575648.544 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:54:08.543Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:54:08.549Z,1422575648.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:54:08.926Z,1422575648.926 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:54:08.951Z,1422575648.951 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:54:08.950Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:54:08.954Z,1422575648.954 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:54:08.953Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:54:08.956Z,1422575648.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:54:09.350Z,1422575649.350 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:54:09.365Z,1422575649.365 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:54:09.363Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:54:09.368Z,1422575649.368 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:54:09.366Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:54:09.370Z,1422575649.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:54:09.767Z,1422575649.767 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:54:09.783Z,1422575649.783 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:54:09.782Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:54:09.806Z,1422575649.806 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:54:09.784Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:54:09.808Z,1422575649.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:54:10.172Z,1422575650.172 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:54:10.209Z,1422575650.209 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:54:10.207Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:54:10.211Z,1422575650.211 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:54:10.210Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:54:10.213Z,1422575650.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:54:10.612Z,1422575650.612 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:54:11.175Z,1422575651.175 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:54:11.173Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:54:11.177Z,1422575651.177 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:54:11.176Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:54:11.179Z,1422575651.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:54:11.557Z,1422575651.557 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:54:11.673Z,1422575651.673 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:54:11.671Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:54:11.675Z,1422575651.675 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:54:11.674Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:54:11.677Z,1422575651.677 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:54:11.677Z,1422575651.677 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 4
2015-01-29T23:54:11.677Z,1422575651.677 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2015-01-29T23:54:11.680Z,1422575651.680 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:54:11.680Z,1422575651.680 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 4
2015-01-29T23:54:11.680Z,1422575651.680 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2015-01-29T23:54:11.682Z,1422575651.682 [DeadReckonWithRespectToWater](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:54:11.682Z,1422575651.682 [DeadReckonWithRespectToWater] Software Fault, FailCount= 4
2015-01-29T23:54:11.683Z,1422575651.682 [DeadReckonWithRespectToWater](ERROR): Software Fault
2015-01-29T23:54:11.685Z,1422575651.685 [DeadReckonWithRespectToSeafloor](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:54:11.685Z,1422575651.685 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 4
2015-01-29T23:54:11.685Z,1422575651.685 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2015-01-29T23:54:11.687Z,1422575651.687 [DeadReckonUsingDVLWaterTrack](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:54:11.688Z,1422575651.688 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 4
2015-01-29T23:54:11.688Z,1422575651.688 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2015-01-29T23:54:11.698Z,1422575651.698 [DeadReckonUsingCompactModelForecast](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:54:11.698Z,1422575651.698 [DeadReckonUsingCompactModelForecast] Software Fault, FailCount= 4
2015-01-29T23:54:11.698Z,1422575651.698 [DeadReckonUsingCompactModelForecast](ERROR): Software Fault
2015-01-29T23:54:11.723Z,1422575651.723 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2015-01-29T23:54:11.723Z,1422575651.723 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2015-01-29T23:54:11.723Z,1422575651.723 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToWater
2015-01-29T23:54:11.723Z,1422575651.723 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2015-01-29T23:54:11.724Z,1422575651.724 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2015-01-29T23:54:11.724Z,1422575651.724 [CBIT](ERROR): Software Fault in component: DeadReckonUsingCompactModelForecast
2015-01-29T23:54:12.078Z,1422575652.078 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:54:12.111Z,1422575652.111 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:54:12.110Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:54:12.115Z,1422575652.115 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:54:12.112Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:54:12.141Z,1422575652.141 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2015-01-29T23:54:12.142Z,1422575652.142 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 4
2015-01-29T23:54:12.142Z,1422575652.142 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2015-01-29T23:54:12.142Z,1422575652.142 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 4
2015-01-29T23:54:12.143Z,1422575652.143 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToWater
2015-01-29T23:54:12.143Z,1422575652.143 [DeadReckonWithRespectToWater] No Fault, FailCount= 4
2015-01-29T23:54:12.144Z,1422575652.144 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2015-01-29T23:54:12.144Z,1422575652.144 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 4
2015-01-29T23:54:12.145Z,1422575652.145 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2015-01-29T23:54:12.145Z,1422575652.145 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 4
2015-01-29T23:54:12.154Z,1422575652.154 [CBIT](INFO): Clearing failed state for component DeadReckonUsingCompactModelForecast
2015-01-29T23:54:12.154Z,1422575652.154 [DeadReckonUsingCompactModelForecast] No Fault, FailCount= 4
2015-01-29T23:54:12.487Z,1422575652.487 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:54:12.557Z,1422575652.557 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:54:12.556Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:54:12.559Z,1422575652.559 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:54:12.558Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:54:12.560Z,1422575652.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2015-01-29T23:54:12.561Z,1422575652.561 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2015-01-29T23:54:12.561Z,1422575652.561 [DeadReckonWithRespectToWater](DEBUG): Initializing DeadReckonWithRespectToWater component.
2015-01-29T23:54:12.562Z,1422575652.562 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2015-01-29T23:54:12.562Z,1422575652.562 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2015-01-29T23:54:12.562Z,1422575652.562 [DeadReckonUsingCompactModelForecast](DEBUG): Initializing DeadReckonUsingCompactModelForecast component.
2015-01-29T23:54:12.957Z,1422575652.957 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:54:12.989Z,1422575652.989 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:54:12.988Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:54:12.992Z,1422575652.992 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:54:12.991Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:54:12.993Z,1422575652.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-01-29T23:54:13.011Z,1422575653.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:54:13.380Z,1422575653.380 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:54:13.462Z,1422575653.462 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:54:13.461Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:54:13.465Z,1422575653.465 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:54:13.463Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:54:13.466Z,1422575653.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-01-29T23:54:13.468Z,1422575653.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:54:13.861Z,1422575653.861 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:54:13.915Z,1422575653.915 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:54:13.899Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:54:13.917Z,1422575653.917 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:54:13.916Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:54:13.919Z,1422575653.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 2 cycles since last successful read, accepting data for 5 cycles.
2015-01-29T23:54:13.920Z,1422575653.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:54:14.294Z,1422575654.294 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:54:14.321Z,1422575654.321 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:54:14.320Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:54:14.323Z,1422575654.323 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:54:14.322Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:54:14.325Z,1422575654.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 3 cycles since last successful read, accepting data for 5 cycles.
2015-01-29T23:54:14.326Z,1422575654.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:54:14.711Z,1422575654.711 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:54:14.744Z,1422575654.744 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:54:14.742Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:54:14.746Z,1422575654.746 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:54:14.745Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:54:14.748Z,1422575654.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 4 cycles since last successful read, accepting data for 5 cycles.
2015-01-29T23:54:14.765Z,1422575654.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:54:15.135Z,1422575655.135 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:54:15.180Z,1422575655.180 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:54:15.179Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:54:15.183Z,1422575655.183 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:54:15.181Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:54:15.184Z,1422575655.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 5 cycles since last successful read, accepting data for 5 cycles.
2015-01-29T23:54:15.185Z,1422575655.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:54:15.572Z,1422575655.572 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:54:16.098Z,1422575656.098 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:54:16.096Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:54:16.100Z,1422575656.100 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:54:16.099Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:54:16.102Z,1422575656.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:54:16.477Z,1422575656.477 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:54:16.525Z,1422575656.525 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:54:16.523Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:54:16.527Z,1422575656.527 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:54:16.526Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:54:16.529Z,1422575656.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:54:16.918Z,1422575656.918 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:54:16.933Z,1422575656.933 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:54:16.931Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:54:16.935Z,1422575656.935 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:54:16.934Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:54:16.938Z,1422575656.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:54:17.327Z,1422575657.327 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:54:17.354Z,1422575657.354 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:54:17.353Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:54:17.357Z,1422575657.357 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:54:17.355Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:54:17.380Z,1422575657.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:54:17.751Z,1422575657.751 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:54:17.833Z,1422575657.833 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:54:17.831Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:54:17.835Z,1422575657.835 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:54:17.834Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:54:17.837Z,1422575657.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:54:18.204Z,1422575658.204 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:54:18.232Z,1422575658.232 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:54:18.231Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:54:18.235Z,1422575658.235 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:54:18.233Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:54:18.237Z,1422575658.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:54:18.627Z,1422575658.627 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:54:18.642Z,1422575658.642 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:54:18.640Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:54:18.644Z,1422575658.644 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:54:18.643Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:54:18.646Z,1422575658.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:54:19.037Z,1422575659.037 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:54:19.052Z,1422575659.052 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:54:19.050Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:54:19.054Z,1422575659.054 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:54:19.053Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:54:19.057Z,1422575659.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:54:19.446Z,1422575659.446 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:54:19.461Z,1422575659.461 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:54:19.459Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:54:19.463Z,1422575659.463 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:54:19.462Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:54:19.466Z,1422575659.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:54:19.845Z,1422575659.845 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:54:19.870Z,1422575659.870 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:54:19.868Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:54:19.872Z,1422575659.872 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:54:19.871Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:54:19.887Z,1422575659.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:54:20.267Z,1422575660.267 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:54:20.798Z,1422575660.798 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:54:20.796Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:54:20.800Z,1422575660.800 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:54:20.799Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:54:20.803Z,1422575660.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:54:21.183Z,1422575661.183 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:54:21.263Z,1422575661.263 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:54:21.261Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:54:21.265Z,1422575661.265 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:54:21.264Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:54:21.267Z,1422575661.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:54:21.650Z,1422575661.650 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:54:21.667Z,1422575661.667 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:54:21.665Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:54:21.669Z,1422575661.669 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:54:21.668Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:54:21.672Z,1422575661.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:54:22.070Z,1422575662.070 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:54:22.112Z,1422575662.112 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:54:22.111Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:54:22.115Z,1422575662.115 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:54:22.113Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:54:22.117Z,1422575662.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:54:22.523Z,1422575662.523 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:54:22.568Z,1422575662.568 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:54:22.566Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:54:22.570Z,1422575662.570 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:54:22.569Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:54:22.572Z,1422575662.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:54:22.959Z,1422575662.959 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:54:23.014Z,1422575663.014 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:54:22.993Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:54:23.016Z,1422575663.016 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:54:23.015Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:54:23.018Z,1422575663.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:54:23.388Z,1422575663.388 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:54:23.416Z,1422575663.416 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:54:23.414Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:54:23.418Z,1422575663.418 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:54:23.417Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:54:23.420Z,1422575663.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:54:23.821Z,1422575663.821 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:54:23.837Z,1422575663.837 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:54:23.835Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:54:23.839Z,1422575663.839 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:54:23.838Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:54:23.841Z,1422575663.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:54:24.221Z,1422575664.221 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:54:24.299Z,1422575664.299 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:54:24.297Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:54:24.301Z,1422575664.301 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:54:24.300Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:54:24.303Z,1422575664.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:54:24.702Z,1422575664.702 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:54:25.232Z,1422575665.232 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:54:25.230Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:54:25.234Z,1422575665.234 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:54:25.233Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:54:25.236Z,1422575665.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:54:25.628Z,1422575665.628 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:54:25.655Z,1422575665.655 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:54:25.654Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:54:25.657Z,1422575665.657 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:54:25.656Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:54:25.680Z,1422575665.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:54:26.048Z,1422575666.048 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:54:26.078Z,1422575666.078 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:54:26.077Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:54:26.081Z,1422575666.081 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:54:26.079Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:54:26.083Z,1422575666.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:54:26.457Z,1422575666.457 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:54:26.543Z,1422575666.543 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:54:26.541Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:54:26.549Z,1422575666.549 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:54:26.548Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:54:26.556Z,1422575666.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:54:26.934Z,1422575666.934 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:54:26.961Z,1422575666.961 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:54:26.960Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:54:26.963Z,1422575666.963 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:54:26.962Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:54:26.987Z,1422575666.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:54:27.371Z,1422575667.371 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:54:27.484Z,1422575667.484 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:54:27.483Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:54:27.487Z,1422575667.487 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:54:27.485Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:54:27.489Z,1422575667.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:54:27.891Z,1422575667.891 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:54:27.908Z,1422575667.908 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:54:27.907Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:54:27.911Z,1422575667.911 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:54:27.909Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:54:27.913Z,1422575667.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:54:28.300Z,1422575668.300 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:54:28.346Z,1422575668.346 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:54:28.344Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:54:28.348Z,1422575668.348 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:54:28.347Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:54:28.350Z,1422575668.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:54:28.744Z,1422575668.744 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:54:28.794Z,1422575668.794 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:54:28.793Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:54:28.797Z,1422575668.797 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:54:28.795Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:54:28.799Z,1422575668.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:54:29.193Z,1422575669.193 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:54:29.239Z,1422575669.239 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:54:29.238Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:54:29.242Z,1422575669.242 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:54:29.241Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:54:29.244Z,1422575669.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:54:29.626Z,1422575669.626 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:54:29.725Z,1422575669.725 [CommandLine](IMPORTANT): got command show stack
2015-01-29T23:54:29.725Z,1422575669.725 [CommandLine](IMPORTANT): Behavior Stack:

2015-01-29T23:54:29.725Z,1422575669.725 [Default](IMPORTANT): Priority 0: Default:B.GoToSurface
2015-01-29T23:54:29.726Z,1422575669.726 [Default:CheckIn](IMPORTANT): Priority 1: Default:CheckIn:A.SetSpeed
2015-01-29T23:54:29.726Z,1422575669.726 [Default:CheckIn](IMPORTANT): Priority 2: Default:CheckIn:Read_Iridium
2015-01-29T23:54:29.726Z,1422575669.726 [Default:WaitAtTheSurface](IMPORTANT): Priority 3: Default:WaitAtTheSurface:RunApplicationAtLowSpeed.SetSpeed
2015-01-29T23:54:30.156Z,1422575670.156 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:54:30.155Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:54:30.158Z,1422575670.158 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:54:30.157Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:54:30.161Z,1422575670.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:54:30.547Z,1422575670.547 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:54:30.621Z,1422575670.621 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:54:30.620Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:54:30.635Z,1422575670.635 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:54:30.633Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:54:30.637Z,1422575670.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:54:31.029Z,1422575671.029 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:54:31.045Z,1422575671.045 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:54:31.044Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:54:31.048Z,1422575671.048 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:54:31.046Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:54:31.050Z,1422575671.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:54:31.444Z,1422575671.444 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:54:31.492Z,1422575671.492 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:54:31.490Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:54:31.494Z,1422575671.494 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:54:31.493Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:54:31.497Z,1422575671.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:54:31.885Z,1422575671.885 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:54:31.913Z,1422575671.913 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:54:31.912Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:54:31.916Z,1422575671.916 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:54:31.914Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:54:31.918Z,1422575671.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:54:32.306Z,1422575672.306 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:54:32.347Z,1422575672.347 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:54:32.346Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:54:32.350Z,1422575672.350 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:54:32.348Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:54:32.352Z,1422575672.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:54:32.746Z,1422575672.746 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:54:32.761Z,1422575672.761 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:54:32.759Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:54:32.763Z,1422575672.763 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:54:32.762Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:54:32.766Z,1422575672.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:54:33.151Z,1422575673.151 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:54:33.166Z,1422575673.166 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:54:33.164Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:54:33.168Z,1422575673.168 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:54:33.167Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:54:33.170Z,1422575673.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:54:33.567Z,1422575673.567 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:54:33.606Z,1422575673.606 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:54:33.605Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:54:33.609Z,1422575673.609 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:54:33.607Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:54:33.611Z,1422575673.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:54:34.012Z,1422575674.012 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:54:34.058Z,1422575674.058 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:54:34.056Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:54:34.060Z,1422575674.060 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:54:34.059Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:54:34.062Z,1422575674.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:54:34.461Z,1422575674.461 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:54:34.988Z,1422575674.988 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:54:34.987Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:54:34.990Z,1422575674.990 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:54:34.989Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:54:34.993Z,1422575674.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:54:35.387Z,1422575675.387 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:54:35.424Z,1422575675.424 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:54:35.423Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:54:35.442Z,1422575675.442 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:54:35.441Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:54:35.445Z,1422575675.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:54:35.824Z,1422575675.824 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:54:35.846Z,1422575675.846 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:54:35.844Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:54:35.848Z,1422575675.848 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:54:35.847Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:54:35.850Z,1422575675.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:54:36.252Z,1422575676.252 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:54:36.295Z,1422575676.295 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:54:36.293Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:54:36.297Z,1422575676.297 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:54:36.296Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:54:36.300Z,1422575676.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:54:36.701Z,1422575676.701 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:54:36.774Z,1422575676.774 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:54:36.773Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:54:36.781Z,1422575676.781 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:54:36.779Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:54:36.787Z,1422575676.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:54:37.157Z,1422575677.157 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:54:37.204Z,1422575677.204 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:54:37.202Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:54:37.206Z,1422575677.206 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:54:37.205Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:54:37.209Z,1422575677.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:54:37.598Z,1422575677.598 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:54:37.613Z,1422575677.613 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:54:37.612Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:54:37.615Z,1422575677.615 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:54:37.614Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:54:37.618Z,1422575677.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:54:38.013Z,1422575678.013 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:54:38.028Z,1422575678.028 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:54:38.027Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:54:38.031Z,1422575678.031 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:54:38.029Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:54:38.033Z,1422575678.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:54:38.358Z,1422575678.358 [CommandLine](IMPORTANT): got command get latitude
2015-01-29T23:54:38.358Z,1422575678.358 [CommandLine](FAULT): Element has no value
2015-01-29T23:54:38.423Z,1422575678.423 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:54:38.439Z,1422575678.439 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:54:38.437Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:54:38.441Z,1422575678.441 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:54:38.440Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:54:38.464Z,1422575678.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:54:38.836Z,1422575678.836 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:54:38.877Z,1422575678.877 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:54:38.875Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:54:38.879Z,1422575678.879 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:54:38.878Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:54:38.881Z,1422575678.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:54:39.273Z,1422575679.273 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:54:39.808Z,1422575679.808 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:54:39.807Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:54:39.811Z,1422575679.811 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:54:39.809Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:54:39.813Z,1422575679.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:54:40.207Z,1422575680.207 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:54:40.290Z,1422575680.290 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:54:40.289Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:54:40.293Z,1422575680.293 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:54:40.291Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:54:40.298Z,1422575680.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:54:40.683Z,1422575680.683 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:54:40.730Z,1422575680.730 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:54:40.724Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:54:40.732Z,1422575680.732 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:54:40.731Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:54:40.739Z,1422575680.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:54:41.119Z,1422575681.119 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:54:41.120Z,1422575681.120 [DVL_micro](FAULT): DVL failed to acquire valid data within timeout.
2015-01-29T23:54:41.120Z,1422575681.120 [DVL_micro] Data Fault, FailCount= 1
2015-01-29T23:54:41.120Z,1422575681.120 [DVL_micro](ERROR): Data Fault
2015-01-29T23:54:41.185Z,1422575681.185 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:54:41.183Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:54:41.191Z,1422575681.191 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:54:41.186Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:54:41.193Z,1422575681.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:54:41.226Z,1422575681.226 [CBIT](ERROR): Data Fault in component: DVL_micro
2015-01-29T23:54:41.655Z,1422575681.655 [DVL_micro](INFO): uninitialize:Powering down
2015-01-29T23:54:41.684Z,1422575681.684 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:54:41.683Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:54:41.686Z,1422575681.686 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:54:41.685Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:54:41.689Z,1422575681.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:54:42.077Z,1422575682.077 [DVL_micro](FAULT): LCB fault:  Software Overcurrent.
2015-01-29T23:54:42.077Z,1422575682.077 [DVL_micro] Hardware Fault, FailCount= 1
2015-01-29T23:54:42.077Z,1422575682.077 [DVL_micro](ERROR): Hardware Fault
2015-01-29T23:54:42.131Z,1422575682.131 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:54:42.129Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:54:42.133Z,1422575682.133 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:54:42.132Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:54:42.140Z,1422575682.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:54:42.516Z,1422575682.516 [DVL_micro](INFO): Initializing
2015-01-29T23:54:42.579Z,1422575682.579 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:54:42.567Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:54:42.581Z,1422575682.581 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:54:42.580Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:54:42.583Z,1422575682.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:54:42.600Z,1422575682.600 [CBIT](INFO): Clearing failed state for component DVL_micro
2015-01-29T23:54:42.600Z,1422575682.600 [DVL_micro] No Fault, FailCount= 1
2015-01-29T23:54:42.994Z,1422575682.994 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:54:42.992Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:54:42.996Z,1422575682.996 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:54:42.995Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:54:42.998Z,1422575682.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:54:43.442Z,1422575683.442 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:54:43.440Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:54:43.444Z,1422575683.444 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:54:43.443Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:54:43.446Z,1422575683.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:54:43.884Z,1422575683.884 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:54:43.882Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:54:43.886Z,1422575683.886 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:54:43.885Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:54:43.888Z,1422575683.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:54:44.304Z,1422575684.304 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:54:44.303Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:54:44.306Z,1422575684.306 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:54:44.305Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:54:44.309Z,1422575684.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:54:45.229Z,1422575685.229 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:54:45.227Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:54:45.231Z,1422575685.231 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:54:45.230Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:54:45.234Z,1422575685.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:54:45.680Z,1422575685.680 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:54:45.679Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:54:45.683Z,1422575685.683 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:54:45.682Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:54:45.685Z,1422575685.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:54:46.088Z,1422575686.088 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:54:46.087Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:54:46.091Z,1422575686.091 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:54:46.089Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:54:46.093Z,1422575686.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:54:46.517Z,1422575686.517 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:54:46.516Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:54:46.538Z,1422575686.538 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:54:46.537Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:54:46.540Z,1422575686.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:54:46.958Z,1422575686.958 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:54:46.956Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:54:46.960Z,1422575686.960 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:54:46.959Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:54:46.963Z,1422575686.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:54:47.353Z,1422575687.353 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:54:47.395Z,1422575687.395 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:54:47.393Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:54:47.397Z,1422575687.397 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:54:47.396Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:54:47.400Z,1422575687.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:54:47.794Z,1422575687.794 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:54:47.808Z,1422575687.808 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:54:47.807Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:54:47.811Z,1422575687.811 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:54:47.809Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:54:47.813Z,1422575687.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:54:48.206Z,1422575688.206 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:54:48.221Z,1422575688.221 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:54:48.219Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:54:48.223Z,1422575688.223 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:54:48.222Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:54:48.249Z,1422575688.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:54:48.632Z,1422575688.632 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:54:48.664Z,1422575688.664 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:54:48.663Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:54:48.667Z,1422575688.667 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:54:48.665Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:54:48.669Z,1422575688.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:54:49.060Z,1422575689.060 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:54:49.105Z,1422575689.105 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:54:49.104Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:54:49.108Z,1422575689.108 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:54:49.106Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:54:49.111Z,1422575689.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:54:49.504Z,1422575689.504 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:54:49.912Z,1422575689.912 [CommandLine](IMPORTANT): got command quit
2015-01-29T23:54:50.041Z,1422575690.041 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:54:50.039Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:54:50.043Z,1422575690.043 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:54:50.042Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:54:50.045Z,1422575690.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:54:50.442Z,1422575690.442 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:54:50.475Z,1422575690.475 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:54:50.474Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:54:50.494Z,1422575690.494 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:54:50.492Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:54:50.496Z,1422575690.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:54:50.855Z,1422575690.855 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:54:50.869Z,1422575690.869 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:54:50.868Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:54:50.871Z,1422575690.871 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:54:50.870Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:54:50.874Z,1422575690.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:54:50.916Z,1422575690.916 [CommandLine ThreadHandler](INFO): Uninitializing protected caller thread.
2015-01-29T23:54:50.917Z,1422575690.917 [CommandLine ThreadHandler](INFO): Thread cancelled.
2015-01-29T23:54:50.961Z,1422575690.961 [Supervisor](DEBUG): Uninitializing supervisor and starting cleanup.  Bye!
2015-01-29T23:54:50.961Z,1422575690.961 [CommandLine ThreadHandler](INFO): Thread cancelled.
2015-01-29T23:54:50.962Z,1422575690.962 [CommandLine](INFO): Join timeout helper Thread ID is 3386
2015-01-29T23:54:50.963Z,1422575690.963 [ComponentRegistry](INFO): Shutting down NavChartDb ThreadHandler
2015-01-29T23:54:50.963Z,1422575690.963 [NavChartDb ThreadHandler](INFO): Thread cancelled.
2015-01-29T23:54:50.964Z,1422575690.964 [NavChartDb](INFO): Join timeout helper Thread ID is 3387
2015-01-29T23:54:51.105Z,1422575691.105 [NavChartDb ThreadHandler](INFO): Uninitializing protected caller thread.
2015-01-29T23:54:51.106Z,1422575691.106 [NavChartDb ThreadHandler](INFO): Thread cancelled.
2015-01-29T23:54:51.121Z,1422575691.121 [ComponentRegistry](INFO): Shutting down Radio_Surface ThreadHandler
2015-01-29T23:54:51.122Z,1422575691.122 [Radio_Surface ThreadHandler](INFO): Thread cancelled.
2015-01-29T23:54:51.122Z,1422575691.122 [Radio_Surface](INFO): Join timeout helper Thread ID is 3388
2015-01-29T23:54:51.238Z,1422575691.238 [Radio_Surface ThreadHandler](INFO): Uninitializing protected caller thread.
2015-01-29T23:54:51.238Z,1422575691.238 [Radio_Surface ThreadHandler](INFO): Thread cancelled.
2015-01-29T23:54:51.242Z,1422575691.242 [ComponentRegistry](INFO): Shutting down WetLabsBB2FL ThreadHandler
2015-01-29T23:54:51.242Z,1422575691.242 [WetLabsBB2FL ThreadHandler](INFO): Thread cancelled.
2015-01-29T23:54:51.242Z,1422575691.242 [WetLabsBB2FL](INFO): Join timeout helper Thread ID is 3389
2015-01-29T23:54:51.259Z,1422575691.259 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:54:51.308Z,1422575691.308 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:54:51.307Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:54:51.310Z,1422575691.310 [WetLabsBB2FL ThreadHandler](INFO): Uninitializing protected caller thread.
2015-01-29T23:54:51.310Z,1422575691.310 [WetLabsBB2FL](INFO): Powering down
2015-01-29T23:54:51.311Z,1422575691.311 [WetLabsBB2FL ThreadHandler](INFO): Thread cancelled.
2015-01-29T23:54:51.312Z,1422575691.312 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:54:51.309Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:54:51.315Z,1422575691.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:54:51.326Z,1422575691.326 [ComponentRegistry](INFO): Shutting down CTD_NeilBrown ThreadHandler
2015-01-29T23:54:51.326Z,1422575691.326 [CTD_NeilBrown ThreadHandler](INFO): Thread cancelled.
2015-01-29T23:54:51.326Z,1422575691.326 [CTD_NeilBrown](INFO): Join timeout helper Thread ID is 3390
2015-01-29T23:54:51.450Z,1422575691.450 [CTD_NeilBrown ThreadHandler](INFO): Uninitializing protected caller thread.
2015-01-29T23:54:51.450Z,1422575691.450 [CTD_NeilBrown](INFO): Powering down
2015-01-29T23:54:51.451Z,1422575691.451 [CTD_NeilBrown ThreadHandler](INFO): Thread cancelled.
2015-01-29T23:54:51.467Z,1422575691.467 [ComponentRegistry](INFO): Shutting down logger ThreadHandler
2015-01-29T23:54:51.467Z,1422575691.467 [logger ThreadHandler](INFO): Thread cancelled.
2015-01-29T23:54:51.467Z,1422575691.467 [logger](INFO): Join timeout helper Thread ID is 3391
2015-01-29T23:54:51.490Z,1422575691.490 [logger ThreadHandler](INFO): Uninitializing protected caller thread.
2015-01-29T23:54:51.490Z,1422575691.490 [logger ThreadHandler](INFO): Thread cancelled.
2015-01-29T23:54:51.507Z,1422575691.507 [ComponentRegistry](INFO): Shutting down CommandLine ThreadHandler
2015-01-29T23:54:51.507Z,1422575691.507 [CommandLine ThreadHandler](INFO): Thread cancelled.
2015-01-29T23:54:51.507Z,1422575691.507 [ComponentRegistry](INFO): Shutting down controlThread ThreadHandler
2015-01-29T23:54:51.507Z,1422575691.507 [controlThread ThreadHandler](INFO): Thread cancelled.
2015-01-29T23:54:51.508Z,1422575691.508 [controlThread](INFO): Join timeout helper Thread ID is 3392
2015-01-29T23:54:51.688Z,1422575691.688 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2015-01-29T23:54:51.737Z,1422575691.737 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:54:51.736Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:54:51.740Z,1422575691.740 [HFRCMTimeInterpolator](DEBUG): Query for interpolated value 2015-01-29T23:54:51.739Z outside the range of the data. [2015-01-13T22:00:00.000Z, 2015-01-16T10:00:00.000Z]
2015-01-29T23:54:51.742Z,1422575691.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-01-29T23:54:51.760Z,1422575691.760 [controlThread ThreadHandler](INFO): Uninitializing protected caller thread.
2015-01-29T23:54:51.760Z,1422575691.760 [controlThread](DEBUG): Uninitializing ControlThread
2015-01-29T23:54:51.761Z,1422575691.761 [Aanderaa_O2](INFO): Powering down
2015-01-29T23:54:51.763Z,1422575691.763 [AHRS_sp3003D](INFO): Powering down
2015-01-29T23:54:51.923Z,1422575691.923 [DVL_micro](INFO): uninitialize:Powering down
2015-01-29T23:54:51.924Z,1422575691.924 [NAL9602](INFO): Powering down
2015-01-29T23:54:51.926Z,1422575691.926 [DepthRateCalculator](DEBUG): Initializing DepthRateCalculator.
2015-01-29T23:54:51.929Z,1422575691.929 [NavChart](DEBUG): Uninitialize NavChart Navigation.
2015-01-29T23:54:51.930Z,1422575691.930 [Default] Stopped
2015-01-29T23:54:51.930Z,1422575691.930 [Default](INFO): Aggregate::uninitialize Default
2015-01-29T23:54:51.930Z,1422575691.930 [Default:B.GoToSurface] Stopped
2015-01-29T23:54:51.930Z,1422575691.930 [Default:B.GoToSurface](DEBUG): Uninitialize GoToSurfaceComponent.
2015-01-29T23:54:51.930Z,1422575691.930 [Default:CheckIn] Stopped
2015-01-29T23:54:51.930Z,1422575691.930 [Default:CheckIn](INFO): Aggregate::uninitialize Default:CheckIn
2015-01-29T23:54:51.930Z,1422575691.930 [Default:CheckIn:A.SetSpeed] Stopped
2015-01-29T23:54:51.930Z,1422575691.930 [Default:CheckIn:A.SetSpeed](DEBUG): Uninitialize.
2015-01-29T23:54:51.930Z,1422575691.930 [Default:CheckIn:Read_Iridium] Stopped
2015-01-29T23:54:51.931Z,1422575691.931 [Default:WaitAtTheSurface] Stopped
2015-01-29T23:54:51.931Z,1422575691.931 [Default:WaitAtTheSurface](INFO): Aggregate::uninitialize Default:WaitAtTheSurface
2015-01-29T23:54:51.931Z,1422575691.931 [Default:WaitAtTheSurface:RunApplicationAtLowSpeed.SetSpeed] Stopped
2015-01-29T23:54:51.931Z,1422575691.931 [Default:WaitAtTheSurface:RunApplicationAtLowSpeed.SetSpeed](DEBUG): Uninitialize.
2015-01-29T23:54:51.934Z,1422575691.934 [VerticalControl](DEBUG): Uninitialize VerticalControlComponent.
2015-01-29T23:54:51.935Z,1422575691.935 [HorizontalControl](DEBUG): Uninitialize HorizontalControlComponent.
2015-01-29T23:54:51.935Z,1422575691.935 [SpeedControl](DEBUG): Uninitialize SpeedControlComponent.
2015-01-29T23:54:51.935Z,1422575691.935 [LoopControl](DEBUG): Uninitialize LoopControlComponent.
2015-01-29T23:54:51.936Z,1422575691.936 [BuoyancyServo](DEBUG): Uninitialize Buoyancy Servo.
2015-01-29T23:54:51.936Z,1422575691.936 [BuoyancyServo](INFO): Powering down
2015-01-29T23:54:51.951Z,1422575691.951 [ElevatorServo](DEBUG): Uninitialize Elevator Servo.
2015-01-29T23:54:51.951Z,1422575691.951 [ElevatorServo](INFO): Powering down
2015-01-29T23:54:51.952Z,1422575691.952 [MassServo](DEBUG): Uninitialize Mass Servo.
2015-01-29T23:54:51.952Z,1422575691.952 [MassServo](INFO): Powering down
2015-01-29T23:54:51.953Z,1422575691.953 [RudderServo](DEBUG): Uninitialize Rudder Servo.
2015-01-29T23:54:51.953Z,1422575691.953 [RudderServo](INFO): Powering down
2015-01-29T23:54:51.954Z,1422575691.954 [ThrusterServo](DEBUG): Uninitialize Thruster Servo.
2015-01-29T23:54:51.954Z,1422575691.954 [ThrusterServo](INFO): Powering down
2015-01-29T23:54:51.955Z,1422575691.955 [SBIT](DEBUG): Uninitialize SBIT Component.
2015-01-29T23:54:51.955Z,1422575691.955 [IBIT](DEBUG): Uninitialize IBIT Component.
2015-01-29T23:54:51.955Z,1422575691.955 [CBIT](DEBUG): Uninitialize CBIT Component.
2015-01-29T23:54:51.987Z,1422575691.987 [controlThread ThreadHandler](INFO): Thread cancelled.
2015-01-29T23:54:52.054Z,1422575692.054 [WetLabsBB2FL ThreadHandler](INFO): Thread cancelled.
2015-01-29T23:54:52.058Z,1422575692.058 [CTD_NeilBrown ThreadHandler](INFO): Thread cancelled.
2015-01-29T23:54:52.119Z,1422575692.119 [Radio_Surface ThreadHandler](INFO): Thread cancelled.
2015-01-29T23:54:52.164Z,1422575692.164 [NavChartDb ThreadHandler](INFO): Thread cancelled.
2015-01-29T23:54:52.213Z,1422575692.213 [logger ThreadHandler](INFO): Thread cancelled.