2014-08-21T04:12:54.026Z,1408594374.026 [Supervisor](DEBUG): Initializing supervisor.
2014-08-21T04:12:54.029Z,1408594374.029 [SyncHandler](DEBUG): Created PCaller Thread at 4034C4E0
2014-08-21T04:12:54.029Z,1408594374.029 [SyncHandler](INFO): Protected caller Thread ID is 1113
2014-08-21T04:12:54.030Z,1408594374.030 [ComponentRegistry](DEBUG): Component "controlThread" handled in its own thread.
2014-08-21T04:12:54.031Z,1408594374.031 [controlThread ThreadHandler](DEBUG): Created PCaller Thread at 4037C4E0
2014-08-21T04:12:54.031Z,1408594374.031 [controlThread ThreadHandler](INFO): Protected caller Thread ID is 1114
2014-08-21T04:12:54.035Z,1408594374.035 [ComponentRegistry](DEBUG): SyncComponent "CycleStarter" handled in the control thread.
2014-08-21T04:12:54.047Z,1408594374.047 [ComponentRegistry](DEBUG): Component "CommandLine" handled in its own thread.
2014-08-21T04:12:54.048Z,1408594374.048 [CommandLine ThreadHandler](DEBUG): Created PCaller Thread at 403AC4E0
2014-08-21T04:12:54.049Z,1408594374.049 [CommandLine ThreadHandler](INFO): Protected caller Thread ID is 1115
2014-08-21T04:12:54.049Z,1408594374.049 [ComponentRegistry](DEBUG): Component "logger" handled in its own thread.
2014-08-21T04:12:54.050Z,1408594374.050 [logger ThreadHandler](DEBUG): Created PCaller Thread at 403DC4E0
2014-08-21T04:12:54.051Z,1408594374.051 [logger ThreadHandler](INFO): Protected caller Thread ID is 1116
2014-08-21T04:12:54.053Z,1408594374.053 [ComponentRegistry](DEBUG): SyncComponent "LogSplitter" handled in the control thread.
2014-08-21T04:12:54.053Z,1408594374.053 [Supervisor](INFO): Looking for Config files in directory: Config/
2014-08-21T04:12:54.055Z,1408594374.055 [Supervisor](INFO): Opening Config file at: Config/Control.cfg
2014-08-21T04:12:54.391Z,1408594374.391 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Control
2014-08-21T04:12:54.391Z,1408594374.391 [Supervisor](INFO): Opening Config file at: Config/BIT.cfg
2014-08-21T04:12:54.550Z,1408594374.550 [ComponentRegistry](DEBUG): Loaded Config Component "Config/BIT
2014-08-21T04:12:54.551Z,1408594374.551 [Supervisor](INFO): Opening Config file at: Config/Derivation.cfg
2014-08-21T04:12:54.669Z,1408594374.669 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Derivation
2014-08-21T04:12:54.670Z,1408594374.670 [Supervisor](INFO): Opening Config file at: Config/Estimation.cfg
2014-08-21T04:12:54.815Z,1408594374.815 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Estimation
2014-08-21T04:12:54.815Z,1408594374.815 [Supervisor](INFO): Opening Config file at: Config/Guidance.cfg
2014-08-21T04:12:54.903Z,1408594374.903 [Supervisor](INFO): Opening Config file at: Config/Navigation.cfg
2014-08-21T04:12:55.050Z,1408594375.050 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Navigation
2014-08-21T04:12:55.050Z,1408594375.050 [Supervisor](INFO): Opening Config file at: Config/Sample.cfg
2014-08-21T04:12:55.139Z,1408594375.139 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Sample
2014-08-21T04:12:55.140Z,1408594375.140 [Supervisor](INFO): Opening Config file at: Config/Science.cfg
2014-08-21T04:12:55.323Z,1408594375.323 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Science
2014-08-21T04:12:55.323Z,1408594375.323 [Supervisor](INFO): Opening Config file at: Config/Sensor.cfg
2014-08-21T04:12:55.625Z,1408594375.625 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Sensor
2014-08-21T04:12:55.625Z,1408594375.625 [Supervisor](INFO): Opening Config file at: Config/Servo.cfg
2014-08-21T04:12:55.932Z,1408594375.932 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Servo
2014-08-21T04:12:55.933Z,1408594375.933 [Supervisor](INFO): Opening Config file at: Config/Simulator.cfg
2014-08-21T04:12:56.426Z,1408594376.426 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Simulator
2014-08-21T04:12:56.427Z,1408594376.427 [Supervisor](INFO): Opening Config file at: Config/logger.cfg
2014-08-21T04:12:56.621Z,1408594376.621 [ComponentRegistry](DEBUG): Loaded Config Component "Config/logger
2014-08-21T04:12:56.621Z,1408594376.621 [Supervisor](INFO): Opening Config file at: Config/secure.cfg
2014-08-21T04:12:56.726Z,1408594376.726 [ComponentRegistry](DEBUG): Loaded Config Component "Config/secure
2014-08-21T04:12:56.727Z,1408594376.727 [Supervisor](INFO): Opening Config file at: Config/vehicle.cfg
2014-08-21T04:12:57.128Z,1408594377.128 [ComponentRegistry](DEBUG): Loaded Config Component "Config/vehicle
2014-08-21T04:12:57.129Z,1408594377.129 [Supervisor](INFO): Opening Config file at: Config/workSite.cfg
2014-08-21T04:12:57.241Z,1408594377.241 [ComponentRegistry](DEBUG): Loaded Config Component "Config/workSite
2014-08-21T04:12:57.243Z,1408594377.243 [Supervisor](INFO): Looking for Config files in directory: Config/lrauv-daphne/
2014-08-21T04:12:57.244Z,1408594377.244 [Supervisor](INFO): Opening Config file at: Config/lrauv-daphne/Control.cfg
2014-08-21T04:12:57.351Z,1408594377.351 [Supervisor](INFO): Opening Config file at: Config/lrauv-daphne/BIT.cfg
2014-08-21T04:12:57.470Z,1408594377.470 [Supervisor](INFO): Opening Config file at: Config/lrauv-daphne/logger.cfg
2014-08-21T04:12:57.571Z,1408594377.571 [Supervisor](INFO): Opening Config file at: Config/lrauv-daphne/Estimation.cfg
2014-08-21T04:12:57.683Z,1408594377.683 [Supervisor](INFO): Opening Config file at: Config/lrauv-daphne/Navigation.cfg
2014-08-21T04:12:57.781Z,1408594377.781 [Supervisor](INFO): Opening Config file at: Config/lrauv-daphne/Science.cfg
2014-08-21T04:12:57.912Z,1408594377.912 [Supervisor](INFO): Opening Config file at: Config/lrauv-daphne/Sensor.cfg
2014-08-21T04:12:58.062Z,1408594378.062 [Supervisor](INFO): Opening Config file at: Config/lrauv-daphne/Servo.cfg
2014-08-21T04:12:58.165Z,1408594378.165 [Supervisor](INFO): Opening Config file at: Config/lrauv-daphne/Simulator.cfg
2014-08-21T04:12:58.253Z,1408594378.253 [Supervisor](INFO): Opening Config file at: Config/lrauv-daphne/workSite.cfg
2014-08-21T04:12:58.335Z,1408594378.335 [Supervisor](INFO): Opening Config file at: Config/lrauv-daphne/secure.cfg
2014-08-21T04:12:58.434Z,1408594378.434 [Supervisor](INFO): Opening Config file at: Config/lrauv-daphne/vehicle.cfg
2014-08-21T04:12:58.548Z,1408594378.548 [Supervisor](INFO): Looking for Config files in directory: Config/lrauv-daphne/root/
2014-08-21T04:12:58.549Z,1408594378.549 [Supervisor](IMPORTANT): Reading configuration overrides from Data/persisted.cfg
2014-08-21T04:12:58.553Z,1408594378.553 [Module Loader](DEBUG): Loading Module at Modules/Control.so
2014-08-21T04:12:58.602Z,1408594378.602 [VerticalControl](DEBUG): Construct VerticalControl.
2014-08-21T04:12:58.719Z,1408594378.719 [VerticalControl] Loaded
2014-08-21T04:12:58.719Z,1408594378.719 [ComponentRegistry](DEBUG): SyncComponent "VerticalControl" handled in the control thread.
2014-08-21T04:12:58.720Z,1408594378.720 [HorizontalControl](DEBUG): Construct HorizontalControl.
2014-08-21T04:12:58.789Z,1408594378.789 [HorizontalControl] Loaded
2014-08-21T04:12:58.789Z,1408594378.789 [ComponentRegistry](DEBUG): SyncComponent "HorizontalControl" handled in the control thread.
2014-08-21T04:12:58.790Z,1408594378.790 [SpeedControl](DEBUG): Construct SpeedControl.
2014-08-21T04:12:58.796Z,1408594378.796 [SpeedControl] Loaded
2014-08-21T04:12:58.796Z,1408594378.796 [ComponentRegistry](DEBUG): SyncComponent "SpeedControl" handled in the control thread.
2014-08-21T04:12:58.797Z,1408594378.797 [LoopControl](DEBUG): Construct LoopControl.
2014-08-21T04:12:58.797Z,1408594378.797 [LoopControl] Loaded
2014-08-21T04:12:58.797Z,1408594378.797 [ComponentRegistry](DEBUG): SyncComponent "LoopControl" handled in the control thread.
2014-08-21T04:12:58.798Z,1408594378.798 [Module Loader](DEBUG): Loaded Module: Control (Contains the Control components, such as Depth, Heading, and Speed Control)
2014-08-21T04:12:58.798Z,1408594378.798 [Module Loader](DEBUG): Loading Module at Modules/BIT.so
2014-08-21T04:12:58.895Z,1408594378.895 [SBIT](DEBUG): Construct Startup Built In Test.
2014-08-21T04:12:58.907Z,1408594378.907 [SBIT] Loaded
2014-08-21T04:12:58.907Z,1408594378.907 [ComponentRegistry](DEBUG): SyncComponent "SBIT" handled in the control thread.
2014-08-21T04:12:58.908Z,1408594378.908 [IBIT](DEBUG): Construct Initiated Built In Test.
2014-08-21T04:12:58.936Z,1408594378.936 [IBIT] Loaded
2014-08-21T04:12:58.936Z,1408594378.936 [ComponentRegistry](DEBUG): SyncComponent "IBIT" handled in the control thread.
2014-08-21T04:12:58.939Z,1408594378.939 [CBIT](DEBUG): Construct CBIT Built In Test.
2014-08-21T04:12:59.054Z,1408594379.054 [CBIT] Loaded
2014-08-21T04:12:59.054Z,1408594379.054 [ComponentRegistry](DEBUG): SyncComponent "CBIT" handled in the control thread.
2014-08-21T04:12:59.054Z,1408594379.054 [Module Loader](DEBUG): Loaded Module: BIT (Contains the BuiltInTest components, such as C Built In Test)
2014-08-21T04:12:59.055Z,1408594379.055 [Module Loader](DEBUG): Loading Module at Modules/Derivation.so
2014-08-21T04:12:59.073Z,1408594379.073 [DepthRateCalculator] Loaded
2014-08-21T04:12:59.074Z,1408594379.074 [ComponentRegistry](DEBUG): SyncComponent "DepthRateCalculator" handled in the control thread.
2014-08-21T04:12:59.079Z,1408594379.079 [PitchRateCalculator] Loaded
2014-08-21T04:12:59.079Z,1408594379.079 [ComponentRegistry](DEBUG): SyncComponent "PitchRateCalculator" handled in the control thread.
2014-08-21T04:12:59.090Z,1408594379.090 [SpeedCalculator] Loaded
2014-08-21T04:12:59.090Z,1408594379.090 [ComponentRegistry](DEBUG): SyncComponent "SpeedCalculator" handled in the control thread.
2014-08-21T04:12:59.107Z,1408594379.107 [TempGradientCalculator] Loaded
2014-08-21T04:12:59.107Z,1408594379.107 [ComponentRegistry](DEBUG): SyncComponent "TempGradientCalculator" handled in the control thread.
2014-08-21T04:12:59.112Z,1408594379.112 [YawRateCalculator] Loaded
2014-08-21T04:12:59.113Z,1408594379.113 [ComponentRegistry](DEBUG): SyncComponent "YawRateCalculator" handled in the control thread.
2014-08-21T04:12:59.113Z,1408594379.113 [Module Loader](DEBUG): Loaded Module: Derivation (Contains the base derivation components)
2014-08-21T04:12:59.114Z,1408594379.114 [Module Loader](DEBUG): Loading Module at Modules/Estimation.so
2014-08-21T04:13:03.587Z,1408594383.587 [HFRadarCompactModelForecaster] Loaded
2014-08-21T04:13:03.588Z,1408594383.588 [ComponentRegistry](DEBUG): SyncComponent "HFRadarCompactModelForecaster" handled in the control thread.
2014-08-21T04:13:04.704Z,1408594384.704 [HFRCMSpaceInterpolator] Loaded
2014-08-21T04:13:04.704Z,1408594384.704 [ComponentRegistry](DEBUG): SyncComponent "HFRCMSpaceInterpolator" handled in the control thread.
2014-08-21T04:13:04.706Z,1408594384.706 [HFRCMTimeInterpolator] Loaded
2014-08-21T04:13:04.706Z,1408594384.707 [ComponentRegistry](DEBUG): SyncComponent "HFRCMTimeInterpolator" handled in the control thread.
2014-08-21T04:13:05.745Z,1408594385.745 [HFRCMReconstructedInterpolator] Loaded
2014-08-21T04:13:05.745Z,1408594385.745 [ComponentRegistry](DEBUG): SyncComponent "HFRCMReconstructedInterpolator" handled in the control thread.
2014-08-21T04:13:05.757Z,1408594385.757 [HFRCMSurfaceCurrentAtVehicleLocation] Loaded
2014-08-21T04:13:05.758Z,1408594385.758 [ComponentRegistry](DEBUG): SyncComponent "HFRCMSurfaceCurrentAtVehicleLocation" handled in the control thread.
2014-08-21T04:13:05.758Z,1408594385.758 [Module Loader](DEBUG): Loaded Module: Estimation (Contains the base estimation components)
2014-08-21T04:13:05.759Z,1408594385.759 [Module Loader](DEBUG): Loading Module at Modules/Guidance.so
2014-08-21T04:13:05.980Z,1408594385.980 [Module Loader](DEBUG): Loaded Module: Guidance (Contains behaviors and commands)
2014-08-21T04:13:05.981Z,1408594385.981 [Module Loader](DEBUG): Loading Module at Modules/Navigation.so
2014-08-21T04:13:06.059Z,1408594386.059 [DeadReckonUsingMultipleVelocitySourcesVector] Loaded
2014-08-21T04:13:06.059Z,1408594386.059 [ComponentRegistry](DEBUG): SyncComponent "DeadReckonUsingMultipleVelocitySourcesVector" handled in the control thread.
2014-08-21T04:13:06.113Z,1408594386.113 [DeadReckonUsingMultipleVelocitySources] Loaded
2014-08-21T04:13:06.114Z,1408594386.114 [ComponentRegistry](DEBUG): SyncComponent "DeadReckonUsingMultipleVelocitySources" handled in the control thread.
2014-08-21T04:13:06.157Z,1408594386.157 [DeadReckonWithRespectToWater] Loaded
2014-08-21T04:13:06.158Z,1408594386.158 [ComponentRegistry](DEBUG): SyncComponent "DeadReckonWithRespectToWater" handled in the control thread.
2014-08-21T04:13:06.202Z,1408594386.202 [DeadReckonWithRespectToSeafloor] Loaded
2014-08-21T04:13:06.203Z,1408594386.203 [ComponentRegistry](DEBUG): SyncComponent "DeadReckonWithRespectToSeafloor" handled in the control thread.
2014-08-21T04:13:06.260Z,1408594386.260 [DeadReckonUsingDVLWaterTrack] Loaded
2014-08-21T04:13:06.261Z,1408594386.261 [ComponentRegistry](DEBUG): SyncComponent "DeadReckonUsingDVLWaterTrack" handled in the control thread.
2014-08-21T04:13:06.306Z,1408594386.306 [DeadReckonUsingCompactModelForecast] Loaded
2014-08-21T04:13:06.306Z,1408594386.306 [ComponentRegistry](DEBUG): SyncComponent "DeadReckonUsingCompactModelForecast" handled in the control thread.
2014-08-21T04:13:06.323Z,1408594386.323 [NavChart] Loaded
2014-08-21T04:13:06.323Z,1408594386.323 [ComponentRegistry](DEBUG): SyncComponent "NavChart" handled in the control thread.
2014-08-21T04:13:06.328Z,1408594386.328 [UniversalFixResidualReporter] Loaded
2014-08-21T04:13:06.328Z,1408594386.328 [ComponentRegistry](DEBUG): SyncComponent "UniversalFixResidualReporter" handled in the control thread.
2014-08-21T04:13:06.328Z,1408594386.328 [Module Loader](DEBUG): Loaded Module: Navigation (Contains the base navigation components)
2014-08-21T04:13:06.329Z,1408594386.329 [Module Loader](DEBUG): Loading Module at Modules/Sample.so
2014-08-21T04:13:06.338Z,1408594386.338 [Module Loader](DEBUG): Loaded Module: Sample (This is a Sample Module of Sample Components)
2014-08-21T04:13:06.339Z,1408594386.339 [Module Loader](DEBUG): Loading Module at Modules/Science.so
2014-08-21T04:13:06.512Z,1408594386.512 [CTD_NeilBrown] Loaded
2014-08-21T04:13:06.512Z,1408594386.512 [ComponentRegistry](DEBUG): Component "CTD_NeilBrown" handled in its own thread.
2014-08-21T04:13:06.513Z,1408594386.513 [CTD_NeilBrown ThreadHandler](DEBUG): Created PCaller Thread at 406C64E0
2014-08-21T04:13:06.514Z,1408594386.514 [CTD_NeilBrown ThreadHandler](INFO): Protected caller Thread ID is 1198
2014-08-21T04:13:06.529Z,1408594386.529 [PAR_Licor] Loaded
2014-08-21T04:13:06.529Z,1408594386.529 [ComponentRegistry](DEBUG): SyncComponent "PAR_Licor" handled in the control thread.
2014-08-21T04:13:06.564Z,1408594386.564 [WetLabsBB2FL] Loaded
2014-08-21T04:13:06.564Z,1408594386.564 [ComponentRegistry](DEBUG): Component "WetLabsBB2FL" handled in its own thread.
2014-08-21T04:13:06.565Z,1408594386.565 [WetLabsBB2FL ThreadHandler](DEBUG): Created PCaller Thread at 406F64E0
2014-08-21T04:13:06.566Z,1408594386.566 [WetLabsBB2FL ThreadHandler](INFO): Protected caller Thread ID is 1199
2014-08-21T04:13:06.566Z,1408594386.566 [Module Loader](DEBUG): Loaded Module: Science (Contains the science components)
2014-08-21T04:13:06.567Z,1408594386.567 [Module Loader](DEBUG): Loading Module at Modules/Sensor.so
2014-08-21T04:13:06.851Z,1408594386.851 [AHRS_sp3003D] Loaded
2014-08-21T04:13:06.851Z,1408594386.851 [ComponentRegistry](DEBUG): SyncComponent "AHRS_sp3003D" handled in the control thread.
2014-08-21T04:13:07.105Z,1408594387.105 [Batt_Ocean_Server] Loaded
2014-08-21T04:13:07.106Z,1408594387.106 [ComponentRegistry](DEBUG): SyncComponent "Batt_Ocean_Server" handled in the control thread.
2014-08-21T04:13:07.180Z,1408594387.180 [DataOverHttps] Loaded
2014-08-21T04:13:07.181Z,1408594387.181 [ComponentRegistry](DEBUG): SyncComponent "DataOverHttps" handled in the control thread.
2014-08-21T04:13:07.194Z,1408594387.194 [Depth_Keller] Loaded
2014-08-21T04:13:07.194Z,1408594387.194 [ComponentRegistry](DEBUG): SyncComponent "Depth_Keller" handled in the control thread.
2014-08-21T04:13:07.324Z,1408594387.324 [DVL_micro] Loaded
2014-08-21T04:13:07.325Z,1408594387.325 [ComponentRegistry](DEBUG): SyncComponent "DVL_micro" handled in the control thread.
2014-08-21T04:13:07.416Z,1408594387.416 [NAL9602] Loaded
2014-08-21T04:13:07.417Z,1408594387.417 [ComponentRegistry](DEBUG): SyncComponent "NAL9602" handled in the control thread.
2014-08-21T04:13:07.457Z,1408594387.457 [Onboard] Loaded
2014-08-21T04:13:07.458Z,1408594387.458 [ComponentRegistry](DEBUG): SyncComponent "Onboard" handled in the control thread.
2014-08-21T04:13:07.465Z,1408594387.465 [Radio_Freewave] Loaded
2014-08-21T04:13:07.465Z,1408594387.465 [ComponentRegistry](DEBUG): Component "Radio_Freewave" handled in its own thread.
2014-08-21T04:13:07.466Z,1408594387.466 [Radio_Freewave ThreadHandler](DEBUG): Created PCaller Thread at 409314E0
2014-08-21T04:13:07.467Z,1408594387.467 [Radio_Freewave ThreadHandler](INFO): Protected caller Thread ID is 1200
2014-08-21T04:13:07.590Z,1408594387.590 [DAT] Loaded
2014-08-21T04:13:07.591Z,1408594387.591 [ComponentRegistry](DEBUG): SyncComponent "DAT" handled in the control thread.
2014-08-21T04:13:07.597Z,1408594387.597 [SCPI] Loaded
2014-08-21T04:13:07.597Z,1408594387.597 [ComponentRegistry](DEBUG): SyncComponent "SCPI" handled in the control thread.
2014-08-21T04:13:07.598Z,1408594387.598 [Module Loader](DEBUG): Loaded Module: Sensor (Contains the sensor components)
2014-08-21T04:13:07.599Z,1408594387.599 [Module Loader](DEBUG): Loading Module at Modules/Servo.so
2014-08-21T04:13:07.695Z,1408594387.695 [BuoyancyServo] Loaded
2014-08-21T04:13:07.695Z,1408594387.695 [ComponentRegistry](DEBUG): SyncComponent "BuoyancyServo" handled in the control thread.
2014-08-21T04:13:07.708Z,1408594387.708 [ElevatorServo] Loaded
2014-08-21T04:13:07.708Z,1408594387.708 [ComponentRegistry](DEBUG): SyncComponent "ElevatorServo" handled in the control thread.
2014-08-21T04:13:07.719Z,1408594387.719 [MassServo] Loaded
2014-08-21T04:13:07.719Z,1408594387.719 [ComponentRegistry](DEBUG): SyncComponent "MassServo" handled in the control thread.
2014-08-21T04:13:07.731Z,1408594387.731 [RudderServo] Loaded
2014-08-21T04:13:07.731Z,1408594387.731 [ComponentRegistry](DEBUG): SyncComponent "RudderServo" handled in the control thread.
2014-08-21T04:13:07.742Z,1408594387.742 [ThrusterServo] Loaded
2014-08-21T04:13:07.743Z,1408594387.743 [ComponentRegistry](DEBUG): SyncComponent "ThrusterServo" handled in the control thread.
2014-08-21T04:13:07.743Z,1408594387.743 [Module Loader](DEBUG): Loaded Module: Servo (This is the module containing motor controllers)
2014-08-21T04:13:07.744Z,1408594387.744 [Module Loader](DEBUG): Loading Module at Modules/Simulator.so
2014-08-21T04:13:07.901Z,1408594387.901 [InternalSim] Loaded
2014-08-21T04:13:07.901Z,1408594387.901 [ComponentRegistry](DEBUG): SyncComponent "InternalSim" handled in the control thread.
2014-08-21T04:13:07.902Z,1408594387.902 [Module Loader](DEBUG): Loaded Module: Simulator (This is the module containing the Simulator)
2014-08-21T04:13:07.902Z,1408594387.902 [Module Loader](DEBUG): Loading Module at Modules/Trigger.so
2014-08-21T04:13:07.925Z,1408594387.925 [Module Loader](DEBUG): Loaded Module: Trigger (Contains triggers for use in missions)
2014-08-21T04:13:07.927Z,1408594387.927 [ComponentRegistry](DEBUG): SyncComponent "MissionManager" handled in the control thread.
2014-08-21T04:13:07.928Z,1408594387.928 [ComponentRegistry](DEBUG): SyncComponent "Reporter" handled in the control thread.
2014-08-21T04:13:07.935Z,1408594387.935 [ComponentRegistry](DEBUG): Component "NavChartDb" handled in its own thread.
2014-08-21T04:13:07.936Z,1408594387.936 [NavChartDb ThreadHandler](DEBUG): Created PCaller Thread at 409E24E0
2014-08-21T04:13:07.936Z,1408594387.936 [NavChartDb ThreadHandler](INFO): Protected caller Thread ID is 1201
2014-08-21T04:13:07.941Z,1408594387.941 [Supervisor](INFO): Main Thread ID is 768
2014-08-21T04:13:07.941Z,1408594387.941 [Supervisor](DEBUG): Running supervisor.
2014-08-21T04:13:07.942Z,1408594387.942 [CommandLine ThreadHandler](INFO): Handler Thread ID is 1202
2014-08-21T04:13:07.947Z,1408594387.947 [controlThread ThreadHandler](INFO): Handler Thread ID is 1203
2014-08-21T04:13:07.947Z,1408594387.947 [controlThread](DEBUG): Initializing ControlThread
2014-08-21T04:13:07.948Z,1408594387.948 [VerticalControl](DEBUG): Initialize VerticalControlComponent.
2014-08-21T04:13:07.950Z,1408594387.950 [HorizontalControl](DEBUG): Initialize HorizontalControlComponent.
2014-08-21T04:13:07.950Z,1408594387.950 [SpeedControl](DEBUG): Initialize SpeedControlComponent.
2014-08-21T04:13:07.951Z,1408594387.951 [LoopControl](DEBUG): Initialize LoopControlComponent.
2014-08-21T04:13:07.951Z,1408594387.951 [SBIT](INFO): Initialize SBIT Component.
2014-08-21T04:13:07.952Z,1408594387.952 [SBIT](IMPORTANT): Tethys CM Info: SVN revision: 11562
2014-08-21T04:13:07.952Z,1408594387.952 [SBIT](IMPORTANT): Kernel Release: 2.6.27.8
2014-08-21T04:13:07.952Z,1408594387.952 [SBIT](IMPORTANT): Kernel Version:#639 PREEMPT Wed Mar 12 12:53:33 PDT 2014
2014-08-21T04:13:07.953Z,1408594387.953 [IBIT](INFO): Initialize IBIT Component.
2014-08-21T04:13:07.954Z,1408594387.954 [CBIT](DEBUG): Initialize CBIT Component.
2014-08-21T04:13:07.954Z,1408594387.954 [CBIT](INFO): Last reboot was NOT due to watchdog timer.
2014-08-21T04:13:07.955Z,1408594387.955 [logger ThreadHandler](INFO): Handler Thread ID is 1204
2014-08-21T04:13:07.973Z,1408594387.973 [CTD_NeilBrown ThreadHandler](INFO): Handler Thread ID is 1205
2014-08-21T04:13:07.974Z,1408594387.974 [CTD_NeilBrown](DEBUG): Initializing CTD_NeilBrown.
2014-08-21T04:13:07.977Z,1408594387.977 [DepthRateCalculator](DEBUG): Initializing DepthRateCalculator.
2014-08-21T04:13:07.978Z,1408594387.978 [PitchRateCalculator](DEBUG): Initializing PitchRateCalculator.
2014-08-21T04:13:07.978Z,1408594387.978 [SpeedCalculator](DEBUG): Initializing SpeedCalculator.
2014-08-21T04:13:07.978Z,1408594387.978 [TempGradientCalculator](DEBUG): Initializing TempGradientCalculator.
2014-08-21T04:13:07.979Z,1408594387.979 [YawRateCalculator](DEBUG): Initializing YawRateCalculator.
2014-08-21T04:13:07.986Z,1408594387.986 [HFRadarCompactModelForecaster](DEBUG): Found new ECs!
2014-08-21T04:13:07.997Z,1408594387.997 [CTD_NeilBrown](INFO): Opening uart, block timeout 10ths=4
2014-08-21T04:13:08.007Z,1408594388.007 [WetLabsBB2FL ThreadHandler](INFO): Handler Thread ID is 1207
2014-08-21T04:13:08.008Z,1408594388.008 [WetLabsBB2FL](INFO): Powering down
2014-08-21T04:13:08.040Z,1408594388.040 [Radio_Freewave ThreadHandler](INFO): Handler Thread ID is 1208
2014-08-21T04:13:08.082Z,1408594388.082 [NavChartDb ThreadHandler](INFO): Handler Thread ID is 1210
2014-08-21T04:13:08.085Z,1408594388.085 [NavChartDb](INFO): Looking for Electronic Nav Chart files in directory: Resources
2014-08-21T04:13:08.086Z,1408594388.086 [NavChartDb](INFO): Already Loaded Electronic Nav Chart data from US1WC07M.000
2014-08-21T04:13:08.086Z,1408594388.086 [NavChartDb](INFO): Already Loaded Electronic Nav Chart data from US2WC11M.000
2014-08-21T04:13:08.087Z,1408594388.087 [NavChartDb](INFO): Already Loaded Electronic Nav Chart data from US3CA52M.000
2014-08-21T04:13:08.087Z,1408594388.087 [NavChartDb](INFO): Already Loaded Electronic Nav Chart data from US4CA60M.000
2014-08-21T04:13:08.087Z,1408594388.087 [NavChartDb](INFO): Already Loaded Electronic Nav Chart data from US5CA50M.000
2014-08-21T04:13:08.087Z,1408594388.087 [NavChartDb](INFO): Already Loaded Electronic Nav Chart data from US5CA61M.000
2014-08-21T04:13:08.087Z,1408594388.087 [NavChartDb](INFO): Already Loaded Electronic Nav Chart data from US5CA62M.000
2014-08-21T04:13:08.088Z,1408594388.088 [NavChartDb](INFO): Already Loaded Electronic Nav Chart data from US5CA83M.000
2014-08-21T04:13:08.369Z,1408594388.369 [Radio_Freewave](INFO): Powering up
2014-08-21T04:13:09.180Z,1408594389.180 [Radio_Freewave](IMPORTANT): Starting PPPD with command:/sbin/pppd nocrtscts /dev/ttyS1 noauth 115200 10.1.1.2:10.1.1.1 persist maxfail 0
2014-08-21T04:13:17.311Z,1408594397.311 [HFRadarCompactModelForecaster](IMPORTANT): forecast time 201408210100 published
2014-08-21T04:13:17.328Z,1408594397.328 [HFRCMSpaceInterpolator](DEBUG): Initializing HFRCMSpaceInterpolator component with verbosity level 0.
2014-08-21T04:13:17.329Z,1408594397.329 [HFRCMTimeInterpolator](DEBUG): Initializing HFRCMTimeInterpolator component.
2014-08-21T04:13:17.330Z,1408594397.330 [HFRCMReconstructedInterpolator](INFO): Initializing HFRCMReconstructedInterpolator component with velocityAccuracy_ = 0.300000 m/s.
2014-08-21T04:13:17.332Z,1408594397.332 [HFRCMSurfaceCurrentAtVehicleLocation](DEBUG): Initializing HFRCMSurfaceCurrentAtVehicleLocation component.
2014-08-21T04:13:17.332Z,1408594397.332 [DeadReckonUsingMultipleVelocitySourcesVector](DEBUG): Initializing DeadReckonUsingMultipleVelocitySourcesVector component.
2014-08-21T04:13:17.333Z,1408594397.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2014-08-21T04:13:17.333Z,1408594397.333 [DeadReckonWithRespectToWater](DEBUG): Initializing DeadReckonWithRespectToWater component.
2014-08-21T04:13:17.334Z,1408594397.334 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2014-08-21T04:13:17.334Z,1408594397.334 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2014-08-21T04:13:17.335Z,1408594397.335 [DeadReckonUsingCompactModelForecast](DEBUG): Initializing DeadReckonUsingCompactModelForecast component.
2014-08-21T04:13:17.335Z,1408594397.335 [NavChart](DEBUG): Initialize NavChart Navigation.
2014-08-21T04:13:17.352Z,1408594397.352 [UniversalFixResidualReporter](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2014-08-21T04:13:19.131Z,1408594399.131 [Batt_Ocean_Server](INFO): Ocean Server Batteries initialized
2014-08-21T04:13:19.163Z,1408594399.163 [InternalSim](DEBUG):  InternalSim initializing...
2014-08-21T04:13:19.251Z,1408594399.251 [MissionManager](INFO): Loading Mission: Missions/Startup.xml
2014-08-21T04:13:19.286Z,1408594399.286 [Startup:A.GoToSurface](DEBUG): Construct GoToSurface.
2014-08-21T04:13:19.311Z,1408594399.311 [MissionManager](DEBUG): 
<?xml version="1.0" encoding="UTF-8"?>
<Mission xmlns="Tethys"
       xmlns:Control="Tethys/Control"
       xmlns:Guidance="Tethys/Guidance" 
       xmlns:Units="Tethys/Units"
       xmlns:Universal="Tethys/Universal"
       xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
       xsi:schemaLocation="Tethys http://aosn.mbari.org/tethys/Xml/Tethys.xsd
                           Tethys/Control http://aosn.mbari.org/tethys/Xml/Control.xsd
                           Tethys/Guidance http://aosn.mbari.org/tethys/Xml/Guidance.xsd
                           Tethys/Units http://aosn.mbari.org/tethys/Xml/Units.xsd
                           Tethys/Universal http://aosn.mbari.org/tethys/Xml/Universal.xsd"
       Id="Startup">

    <Guidance:GoToSurface>
        <Progression/>
    </Guidance:GoToSurface>

    <Aggregate Id="StartupSatComms">

        <Sequence/>

        <ReadDatum>
            <Timeout Duration="P1M" />
            <Universal:latitude_fix/>
        </ReadDatum>

        <ReadDatum>
            <Timeout Duration="P1M" />
            <Universal:platform_communications/>
        </ReadDatum>

    </Aggregate>

</Mission>


2014-08-21T04:13:19.312Z,1408594399.312 [MissionManager](INFO): Loading Mission: Missions/Default.xml
2014-08-21T04:13:19.416Z,1408594399.416 [MissionManager](INFO): DefineArg Default.TimeMissionWasStarted = 0.000000 h
2014-08-21T04:13:19.420Z,1408594399.420 [MissionManager](INFO): DefineArg Default.ElapsedSinceMissionWasStarted = 0.000000 h
2014-08-21T04:13:19.440Z,1408594399.440 [Default:B.GoToSurface](DEBUG): Construct GoToSurface.
2014-08-21T04:13:19.465Z,1408594399.465 [Default:CheckIn:A.SetSpeed](DEBUG): Construct.
2014-08-21T04:13:19.491Z,1408594399.491 [Default:CheckIn:Read_Iridium:A_Timeout:A.Execute](DEBUG): Construct Execute.
2014-08-21T04:13:19.509Z,1408594399.509 [Default:WaitAtTheSurface:RunApplicationAtLowSpeed.SetSpeed](DEBUG): Construct.
2014-08-21T04:13:19.537Z,1408594399.537 [MissionManager](DEBUG): 
<?xml version="1.0" encoding="UTF-8"?>
<Mission xmlns="Tethys"
xmlns:Control="Tethys/Control"
xmlns:Guidance="Tethys/Guidance" 
xmlns:Units="Tethys/Units"
xmlns:Universal="Tethys/Universal"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:schemaLocation="Tethys http://aosn.mbari.org/tethys/Xml/Tethys.xsd
Tethys/Control http://aosn.mbari.org/tethys/Xml/Control.xsd
Tethys/Guidance http://aosn.mbari.org/tethys/Xml/Guidance.xsd
Tethys/Units http://aosn.mbari.org/tethys/Xml/Units.xsd
Tethys/Universal http://aosn.mbari.org/tethys/Xml/Universal.xsd"
Id="Default">

    <DefineArg Name="TimeMissionWasStarted"><Units:hour/><Value>0</Value></DefineArg>

    <DefineArg Name="ElapsedSinceMissionWasStarted"><Units:hour/><Value>0</Value></DefineArg>

    <Aggregate Id="StartClock">

        <Sequence/>

        <Assign><Arg Name="TimeMissionWasStarted"/><Universal:time/></Assign>

    </Aggregate>

    <Guidance:GoToSurface>
        <Progression/>
    </Guidance:GoToSurface>

    <Aggregate Id="CheckIn">

        <When>
            <Elapsed><Universal:platform_communications/></Elapsed>
            <Gt><Units:minute/><Value>5.0</Value></Gt>
            <And><Universal:platform_conversation/><Eq><True/></Eq></And>
            <Or><Elapsed><Universal:platform_communications/></Elapsed><Gt><Units:hour/><Value>1.0</Value></Gt></Or>
        </When>

<!-- TODO: Do we really want this When operating on platform_communications? or on something else like time_fix? -->

<!-- Run application at high speed -->

        <Guidance:SetSpeed>
            <Parallel/>
            <Setting><Guidance:SetSpeed.period/><Units:millisecond/><Value>400</Value></Setting>
        </Guidance:SetSpeed>

        <ReadDatum Id="Read_GPS">
            <Timeout Duration="P5M"/>
<!-- NOTE: Original Default.xml didn't have a timeout on the GPS read, so theoretically could have hung indefinitely there... -->
            <Universal:latitude_fix/>
        </ReadDatum>

<!-- Do data comms -->

        <ReadDatum Id="Read_Iridium">
            <Timeout Duration="P2H">
                <Guidance:Execute>
                    <Sequence/>
                    <Setting><Guidance:Execute.command/><String>Burn 300</String></Setting>
                </Guidance:Execute>
                <Syslog Severity="Critical">Dropped drop weight due to communications timeout</Syslog>
            </Timeout>
            <Universal:platform_communications/>
        </ReadDatum>

    </Aggregate>

    <Aggregate Id="UpdateAndReportMinutesSinceMissionStarted">

        <When>
            <Elapsed><Arg Name="ElapsedSinceMissionWasStarted"/></Elapsed>
            <Gt><Units:minute/><Value>5.0</Value></Gt>
        </When>

        <Assign><Arg Name="ElapsedSinceMissionWasStarted"/><Universal:time/><Sub><Arg Name="TimeMissionWasStarted"/></Sub></Assign>

        <Syslog Severity="Important">Default mission has been running for <Arg Name="ElapsedSinceMissionWasStarted"/><Units:minute/></Syslog>

    </Aggregate>

    <Aggregate Id="WaitAtTheSurface">

        <Sequence/>

        <Guidance:SetSpeed Id="RunApplicationAtLowSpeed">
            <Parallel/>
            <Setting><Guidance:SetSpeed.period/><Units:second/><Value>5</Value></Setting>
        </Guidance:SetSpeed>

    </Aggregate>

</Mission>


2014-08-21T04:13:19.545Z,1408594399.545 [controlThread](DEBUG): Component order: CycleStarter,InternalSim,PAR_Licor,AHRS_sp3003D,Batt_Ocean_Server,DataOverHttps,Depth_Keller,DVL_micro,NAL9602,Onboard,DAT,SCPI,PAR_Licor,Depth_Keller,DepthRateCalculator,PitchRateCalculator,SpeedCalculator,TempGradientCalculator,YawRateCalculator,HFRadarCompactModelForecaster,HFRCMSpaceInterpolator,HFRCMTimeInterpolator,HFRCMReconstructedInterpolator,HFRCMSurfaceCurrentAtVehicleLocation,DeadReckonUsingMultipleVelocitySourcesVector,DeadReckonUsingMultipleVelocitySources,DeadReckonWithRespectToWater,DeadReckonWithRespectToSeafloor,DeadReckonUsingDVLWaterTrack,DeadReckonUsingCompactModelForecast,NavChart,UniversalFixResidualReporter,MissionManager,VerticalControl,HorizontalControl,SpeedControl,LoopControl,BuoyancyServo,ElevatorServo,MassServo,RudderServo,ThrusterServo,SBIT,IBIT,CBIT,Reporter,LogSplitter,
2014-08-21T04:13:19.630Z,1408594399.630 [AHRS_sp3003D](DEBUG): Initializing AHRS_sp3003D.
2014-08-21T04:13:19.685Z,1408594399.685 [Depth_Keller](ERROR): Pressure reading out of range: 915.616455 decibar
2014-08-21T04:13:19.718Z,1408594399.718 [DVL_micro](INFO): Initializing
2014-08-21T04:13:19.741Z,1408594399.741 [NAL9602](INFO): Powering up NAL9602
2014-08-21T04:13:19.778Z,1408594399.778 [DAT](INFO): Powering up
2014-08-21T04:13:19.778Z,1408594399.778 [DAT](DEBUG): Initializing DAT.
2014-08-21T04:13:27.079Z,1408594407.079 [DeadReckonUsingMultipleVelocitySourcesVector](DEBUG): Could not determine rotation from vehicle frame to navigation frame.
2014-08-21T04:13:27.087Z,1408594407.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Could not determine rotation from vehicle frame to navigation frame.
2014-08-21T04:13:27.122Z,1408594407.122 [DeadReckonWithRespectToWater](DEBUG): Could not determine rotation from vehicle frame to navigation frame.
2014-08-21T04:13:27.144Z,1408594407.144 [DeadReckonWithRespectToSeafloor](DEBUG): Could not determine rotation from vehicle frame to navigation frame.
2014-08-21T04:13:27.152Z,1408594407.152 [DeadReckonUsingDVLWaterTrack](DEBUG): Could not determine rotation from vehicle frame to navigation frame.
2014-08-21T04:13:27.167Z,1408594407.167 [DeadReckonUsingCompactModelForecast](DEBUG): Could not determine rotation from vehicle frame to navigation frame.
2014-08-21T04:13:27.275Z,1408594407.275 [BuoyancyServo](DEBUG): Initializing EZServoServo.
2014-08-21T04:13:27.283Z,1408594407.283 [BuoyancyServo](DEBUG): Initializing BuoyancyServo.
2014-08-21T04:13:27.297Z,1408594407.297 [ElevatorServo](DEBUG): Initializing EZServoServo.
2014-08-21T04:13:27.303Z,1408594407.303 [ElevatorServo](DEBUG): Initializing ElevatorServo.
2014-08-21T04:13:27.321Z,1408594407.321 [MassServo](DEBUG): Initializing EZServoServo.
2014-08-21T04:13:27.327Z,1408594407.327 [MassServo](DEBUG): Initializing MassServo.
2014-08-21T04:13:27.349Z,1408594407.349 [RudderServo](DEBUG): Initializing EZServoServo.
2014-08-21T04:13:27.355Z,1408594407.355 [RudderServo](DEBUG): Initializing RudderServo.
2014-08-21T04:13:27.377Z,1408594407.377 [ThrusterServo](DEBUG): Initializing EZServoServo.
2014-08-21T04:13:27.383Z,1408594407.383 [ThrusterServo](DEBUG): Initializing ThrusterServo.
2014-08-21T04:13:28.105Z,1408594408.105 [DeadReckonUsingMultipleVelocitySourcesVector](DEBUG): Could not determine rotation from vehicle frame to navigation frame.
2014-08-21T04:13:28.106Z,1408594408.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Could not determine rotation from vehicle frame to navigation frame.
2014-08-21T04:13:28.107Z,1408594408.107 [DeadReckonWithRespectToWater](DEBUG): Could not determine rotation from vehicle frame to navigation frame.
2014-08-21T04:13:28.112Z,1408594408.112 [DeadReckonWithRespectToSeafloor](DEBUG): Could not determine rotation from vehicle frame to navigation frame.
2014-08-21T04:13:28.113Z,1408594408.113 [DeadReckonUsingDVLWaterTrack](DEBUG): Could not determine rotation from vehicle frame to navigation frame.
2014-08-21T04:13:28.114Z,1408594408.114 [DeadReckonUsingCompactModelForecast](DEBUG): Could not determine rotation from vehicle frame to navigation frame.
2014-08-21T04:13:28.437Z,1408594408.437 [SBIT](IMPORTANT): Beginning Startup BIT
2014-08-21T04:13:28.440Z,1408594408.440 [CBIT](IMPORTANT): Beginning GF scan
2014-08-21T04:13:30.500Z,1408594410.500 [NAL9602](INFO): NAL9602 initialized
2014-08-21T04:13:31.597Z,1408594411.597 [DataOverHttps](INFO): setting available, lastComms_.elapsed()=0.003906
2014-08-21T04:13:32.298Z,1408594412.298 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:13:33.247Z,1408594413.247 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:13:33.766Z,1408594413.766 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:13:34.383Z,1408594414.383 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:13:35.053Z,1408594415.053 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:13:35.637Z,1408594415.637 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:13:35.663Z,1408594415.663 [DAT](INFO): read user prompt: user:1>
2014-08-21T04:13:35.663Z,1408594415.663 [DAT](INFO): setting local address to 2
2014-08-21T04:13:35.666Z,1408594415.666 [DAT](INFO): bytes available on uart_: 0
2014-08-21T04:13:35.667Z,1408594415.667 [DAT](INFO): uart CANNOT read until LocalAddr 0
2014-08-21T04:13:35.677Z,1408594415.677 [DAT](INFO): uart CANNOT read until LocalAddr 0
2014-08-21T04:13:35.677Z,1408594415.677 [DAT](INFO): uart CANNOT read until LocalAddr 0
2014-08-21T04:13:35.677Z,1408594415.677 [DAT](INFO): uart CANNOT read until LocalAddr 0
2014-08-21T04:13:35.678Z,1408594415.678 [DAT](INFO): uart CANNOT read until LocalAddr 0
2014-08-21T04:13:35.678Z,1408594415.678 [DAT](ERROR): failed to set local address; deviceResponse_: user:1>
2014-08-21T04:13:35.678Z,1408594415.678 [DAT] Communications Fault, FailCount= 1
2014-08-21T04:13:35.678Z,1408594415.678 [DAT](ERROR): Communications Fault
2014-08-21T04:13:36.216Z,1408594416.216 [CBIT](ERROR): Communications Fault in component: DAT
2014-08-21T04:13:36.599Z,1408594416.599 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:13:36.624Z,1408594416.624 [DAT](INFO): Powering down
2014-08-21T04:13:37.276Z,1408594417.276 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:13:37.765Z,1408594417.765 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:13:37.932Z,1408594417.932 [CBIT](INFO): Clearing failed state for component DAT
2014-08-21T04:13:37.932Z,1408594417.932 [DAT] No Fault, FailCount= 1
2014-08-21T04:13:38.282Z,1408594418.282 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:13:38.742Z,1408594418.742 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:13:39.239Z,1408594419.239 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:13:39.824Z,1408594419.824 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:13:39.852Z,1408594419.852 [DAT](INFO): Powering up
2014-08-21T04:13:39.852Z,1408594419.852 [DAT](DEBUG): Initializing DAT.
2014-08-21T04:13:40.345Z,1408594420.345 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:13:40.818Z,1408594420.818 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:13:41.359Z,1408594421.359 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:13:41.488Z,1408594421.488 [SBIT](FAULT): Mass: EXPECTED:0.004000 ACTUAL:0.003855
2014-08-21T04:13:41.855Z,1408594421.855 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:13:42.344Z,1408594422.344 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:13:42.813Z,1408594422.813 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:13:43.293Z,1408594423.293 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:13:43.783Z,1408594423.783 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:13:44.399Z,1408594424.399 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:13:45.100Z,1408594425.100 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:13:45.617Z,1408594425.617 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:13:46.146Z,1408594426.146 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:13:46.671Z,1408594426.671 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:13:47.199Z,1408594427.199 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:13:47.697Z,1408594427.697 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:13:48.253Z,1408594428.253 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:13:48.770Z,1408594428.770 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:13:49.407Z,1408594429.407 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:13:50.280Z,1408594430.280 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:13:50.757Z,1408594430.757 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:13:51.226Z,1408594431.226 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:13:51.726Z,1408594431.726 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:13:52.210Z,1408594432.210 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:13:52.688Z,1408594432.688 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:13:53.161Z,1408594433.161 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:13:53.694Z,1408594433.694 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:13:54.186Z,1408594434.186 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:13:54.667Z,1408594434.667 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:13:55.304Z,1408594435.304 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:13:55.329Z,1408594435.329 [DAT](INFO): read user prompt: user:1>
2014-08-21T04:13:55.330Z,1408594435.330 [DAT](INFO): setting local address to 2
2014-08-21T04:13:55.340Z,1408594435.340 [DAT](INFO): bytes available on uart_: 0
2014-08-21T04:13:55.341Z,1408594435.341 [DAT](INFO): uart CANNOT read until LocalAddr 0
2014-08-21T04:13:55.342Z,1408594435.342 [DAT](INFO): uart CANNOT read until LocalAddr 0
2014-08-21T04:13:55.343Z,1408594435.343 [DAT](INFO): uart CANNOT read until LocalAddr 0
2014-08-21T04:13:55.343Z,1408594435.343 [DAT](INFO): uart CANNOT read until LocalAddr 0
2014-08-21T04:13:55.343Z,1408594435.343 [DAT](INFO): uart CANNOT read until LocalAddr 0
2014-08-21T04:13:55.343Z,1408594435.343 [DAT](ERROR): failed to set local address; deviceResponse_: user:1>
2014-08-21T04:13:55.343Z,1408594435.343 [DAT] Communications Fault, FailCount= 2
2014-08-21T04:13:55.344Z,1408594435.344 [DAT](ERROR): Communications Fault
2014-08-21T04:13:55.500Z,1408594435.500 [CBIT](ERROR): Communications Fault in component: DAT
2014-08-21T04:13:55.501Z,1408594435.501 [CBIT](IMPORTANT): No ground fault detected
2014-08-21T04:13:55.865Z,1408594435.865 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:13:55.874Z,1408594435.874 [DAT](INFO): Powering down
2014-08-21T04:13:56.414Z,1408594436.414 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:13:56.854Z,1408594436.854 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:13:56.928Z,1408594436.928 [CBIT](INFO): Clearing failed state for component DAT
2014-08-21T04:13:56.928Z,1408594436.928 [DAT] No Fault, FailCount= 2
2014-08-21T04:13:57.295Z,1408594437.295 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:13:57.732Z,1408594437.732 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:13:58.232Z,1408594438.232 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:13:58.735Z,1408594438.735 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:13:59.222Z,1408594439.222 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:13:59.235Z,1408594439.235 [DAT](INFO): Powering up
2014-08-21T04:13:59.236Z,1408594439.236 [DAT](DEBUG): Initializing DAT.
2014-08-21T04:13:59.700Z,1408594439.700 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:14:00.228Z,1408594440.228 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:14:00.704Z,1408594440.704 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:14:01.153Z,1408594441.153 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:14:01.626Z,1408594441.626 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:14:02.116Z,1408594442.116 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:14:02.551Z,1408594442.551 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:14:02.988Z,1408594442.988 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:14:03.445Z,1408594443.445 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:14:03.937Z,1408594443.937 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:14:03.946Z,1408594443.946 [NAL9602](IMPORTANT): GPS fix at: 1408594442.00
2014-08-21T04:14:04.475Z,1408594444.475 [Batt_Ocean_Server](ERROR): Battery controller B communication timeout. Re-initializing
2014-08-21T04:14:04.478Z,1408594444.478 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:14:04.549Z,1408594444.549 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802380, -121.787140) is outside the bounding box
2014-08-21T04:14:04.551Z,1408594444.551 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802380, -121.787140) is outside the bounding box
2014-08-21T04:14:05.019Z,1408594445.019 [Batt_Ocean_Server] Communications Fault, FailCount= 1
2014-08-21T04:14:05.019Z,1408594445.019 [Batt_Ocean_Server](ERROR): Communications Fault
2014-08-21T04:14:06.500Z,1408594446.500 [Batt_Ocean_Server](ERROR): Batt_Ocean_Server A initialization uart error: serial timeout
2014-08-21T04:14:06.500Z,1408594446.500 [Batt_Ocean_Server](ERROR): Ocean Server Batteries failed to initialize. Re-initializing
2014-08-21T04:14:06.509Z,1408594446.509 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:14:06.610Z,1408594446.610 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802380, -121.787140) is outside the bounding box
2014-08-21T04:14:06.611Z,1408594446.611 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802380, -121.787140) is outside the bounding box
2014-08-21T04:14:06.654Z,1408594446.654 [CBIT](ERROR): Communications Fault in component: Batt_Ocean_Server
2014-08-21T04:14:07.062Z,1408594447.062 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:14:07.090Z,1408594447.090 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802380, -121.787140) is outside the bounding box
2014-08-21T04:14:07.092Z,1408594447.092 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802380, -121.787140) is outside the bounding box
2014-08-21T04:14:07.113Z,1408594447.113 [CBIT](INFO): Clearing failed state for component Batt_Ocean_Server
2014-08-21T04:14:07.113Z,1408594447.113 [Batt_Ocean_Server] No Fault, FailCount= 1
2014-08-21T04:14:09.381Z,1408594449.381 [Batt_Ocean_Server](INFO): Ocean Server Batteries initialized
2014-08-21T04:14:09.414Z,1408594449.414 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:14:09.449Z,1408594449.449 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802380, -121.787140) is outside the bounding box
2014-08-21T04:14:09.451Z,1408594449.451 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802380, -121.787140) is outside the bounding box
2014-08-21T04:14:09.890Z,1408594449.890 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:14:09.923Z,1408594449.923 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802380, -121.787140) is outside the bounding box
2014-08-21T04:14:09.957Z,1408594449.957 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802380, -121.787140) is outside the bounding box
2014-08-21T04:14:10.367Z,1408594450.367 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:14:10.380Z,1408594450.380 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802380, -121.787140) is outside the bounding box
2014-08-21T04:14:10.382Z,1408594450.382 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802380, -121.787140) is outside the bounding box
2014-08-21T04:14:10.800Z,1408594450.800 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:14:10.820Z,1408594450.820 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802380, -121.787140) is outside the bounding box
2014-08-21T04:14:10.822Z,1408594450.822 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802380, -121.787140) is outside the bounding box
2014-08-21T04:14:11.236Z,1408594451.236 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:14:11.264Z,1408594451.264 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802380, -121.787140) is outside the bounding box
2014-08-21T04:14:11.266Z,1408594451.266 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802380, -121.787140) is outside the bounding box
2014-08-21T04:14:11.661Z,1408594451.661 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:14:11.674Z,1408594451.674 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802380, -121.787140) is outside the bounding box
2014-08-21T04:14:11.676Z,1408594451.676 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802380, -121.787140) is outside the bounding box
2014-08-21T04:14:12.259Z,1408594452.259 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:14:12.260Z,1408594452.260 [NAL9602](INFO): Powering down
2014-08-21T04:14:12.279Z,1408594452.279 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802380, -121.787140) is outside the bounding box
2014-08-21T04:14:12.282Z,1408594452.282 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802380, -121.787140) is outside the bounding box
2014-08-21T04:14:13.131Z,1408594453.131 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:14:13.209Z,1408594453.209 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802380, -121.787140) is outside the bounding box
2014-08-21T04:14:13.211Z,1408594453.211 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802380, -121.787140) is outside the bounding box
2014-08-21T04:14:13.692Z,1408594453.692 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:14:13.721Z,1408594453.721 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802380, -121.787140) is outside the bounding box
2014-08-21T04:14:13.723Z,1408594453.723 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802380, -121.787140) is outside the bounding box
2014-08-21T04:14:14.189Z,1408594454.189 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:14:14.202Z,1408594454.202 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802380, -121.787140) is outside the bounding box
2014-08-21T04:14:14.223Z,1408594454.223 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802380, -121.787140) is outside the bounding box
2014-08-21T04:14:14.795Z,1408594454.795 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:14:14.801Z,1408594454.801 [DAT](INFO): read user prompt: user:1>
2014-08-21T04:14:14.802Z,1408594454.802 [DAT](INFO): setting local address to 2
2014-08-21T04:14:14.804Z,1408594454.804 [DAT](INFO): bytes available on uart_: 0
2014-08-21T04:14:14.858Z,1408594454.858 [DAT](INFO): uart can read until LocalAddr 14
2014-08-21T04:14:14.858Z,1408594454.858 [DAT](INFO): bytes: 
LocalAddr    
2014-08-21T04:14:14.859Z,1408594454.859 [DAT](INFO): uart CANNOT read until LocalAddr 0
2014-08-21T04:14:14.859Z,1408594454.859 [DAT](INFO): bytes:  
!
2014-08-21T04:14:14.859Z,1408594454.859 [DAT](INFO): uart CANNOT read until LocalAddr 0
2014-08-21T04:14:14.860Z,1408594454.860 [DAT](INFO): uart CANNOT read until LocalAddr 0
2014-08-21T04:14:14.860Z,1408594454.860 [DAT](INFO): bytes:  
!
2014-08-21T04:14:14.860Z,1408594454.860 [DAT](INFO): uart CANNOT read until LocalAddr 0
2014-08-21T04:14:14.860Z,1408594454.860 [DAT](ERROR): failed to set local address; deviceResponse_: user:1>
2014-08-21T04:14:14.861Z,1408594454.861 [DAT] Communications Fault, FailCount= 3
2014-08-21T04:14:14.861Z,1408594454.861 [DAT](ERROR): Communications Fault
2014-08-21T04:14:14.899Z,1408594454.899 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802380, -121.787140) is outside the bounding box
2014-08-21T04:14:14.901Z,1408594454.901 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802380, -121.787140) is outside the bounding box
2014-08-21T04:14:15.137Z,1408594455.137 [CBIT](ERROR): Communications Fault in component: DAT
2014-08-21T04:14:15.507Z,1408594455.507 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:14:15.513Z,1408594455.513 [DAT](INFO): Powering down
2014-08-21T04:14:15.649Z,1408594455.649 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802380, -121.787140) is outside the bounding box
2014-08-21T04:14:15.651Z,1408594455.651 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802380, -121.787140) is outside the bounding box
2014-08-21T04:14:16.301Z,1408594456.301 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:14:16.334Z,1408594456.334 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802380, -121.787140) is outside the bounding box
2014-08-21T04:14:16.336Z,1408594456.336 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802380, -121.787140) is outside the bounding box
2014-08-21T04:14:16.777Z,1408594456.777 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:14:16.790Z,1408594456.790 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802380, -121.787140) is outside the bounding box
2014-08-21T04:14:16.792Z,1408594456.792 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802380, -121.787140) is outside the bounding box
2014-08-21T04:14:16.884Z,1408594456.884 [CBIT](INFO): Clearing failed state for component DAT
2014-08-21T04:14:16.884Z,1408594456.884 [DAT] No Fault, FailCount= 3
2014-08-21T04:14:17.258Z,1408594457.258 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:14:17.271Z,1408594457.271 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802380, -121.787140) is outside the bounding box
2014-08-21T04:14:17.274Z,1408594457.274 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802380, -121.787140) is outside the bounding box
2014-08-21T04:14:17.690Z,1408594457.690 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:14:17.716Z,1408594457.716 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802380, -121.787140) is outside the bounding box
2014-08-21T04:14:17.734Z,1408594457.734 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802380, -121.787140) is outside the bounding box
2014-08-21T04:14:18.212Z,1408594458.212 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:14:18.252Z,1408594458.252 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802380, -121.787140) is outside the bounding box
2014-08-21T04:14:18.258Z,1408594458.258 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802380, -121.787140) is outside the bounding box
2014-08-21T04:14:18.720Z,1408594458.720 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:14:18.729Z,1408594458.729 [DAT](INFO): Powering up
2014-08-21T04:14:18.729Z,1408594458.729 [DAT](DEBUG): Initializing DAT.
2014-08-21T04:14:18.788Z,1408594458.788 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802380, -121.787140) is outside the bounding box
2014-08-21T04:14:18.790Z,1408594458.790 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802380, -121.787140) is outside the bounding box
2014-08-21T04:14:19.441Z,1408594459.441 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:14:19.635Z,1408594459.635 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802380, -121.787140) is outside the bounding box
2014-08-21T04:14:19.655Z,1408594459.655 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802380, -121.787140) is outside the bounding box
2014-08-21T04:14:20.243Z,1408594460.243 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:14:20.273Z,1408594460.273 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802380, -121.787140) is outside the bounding box
2014-08-21T04:14:20.302Z,1408594460.302 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802380, -121.787140) is outside the bounding box
2014-08-21T04:14:20.860Z,1408594460.860 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:14:20.928Z,1408594460.928 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802380, -121.787140) is outside the bounding box
2014-08-21T04:14:20.943Z,1408594460.943 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802380, -121.787140) is outside the bounding box
2014-08-21T04:14:22.504Z,1408594462.504 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:14:22.555Z,1408594462.555 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802380, -121.787140) is outside the bounding box
2014-08-21T04:14:22.557Z,1408594462.557 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802380, -121.787140) is outside the bounding box
2014-08-21T04:14:23.115Z,1408594463.115 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:14:23.262Z,1408594463.262 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802380, -121.787140) is outside the bounding box
2014-08-21T04:14:23.268Z,1408594463.268 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802380, -121.787140) is outside the bounding box
2014-08-21T04:14:23.780Z,1408594463.780 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:14:23.856Z,1408594463.856 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802380, -121.787140) is outside the bounding box
2014-08-21T04:14:23.858Z,1408594463.858 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802380, -121.787140) is outside the bounding box
2014-08-21T04:14:23.916Z,1408594463.916 [SBIT](CRITICAL): SBIT FAILED
2014-08-21T04:14:23.917Z,1408594463.917 [CommandLine](FAULT): Scheduling is paused
2014-08-21T04:14:24.364Z,1408594464.364 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:14:24.378Z,1408594464.378 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802380, -121.787140) is outside the bounding box
2014-08-21T04:14:24.380Z,1408594464.380 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802380, -121.787140) is outside the bounding box
2014-08-21T04:14:24.393Z,1408594464.393 [MissionManager](IMPORTANT): Started mission Startup
2014-08-21T04:14:24.393Z,1408594464.393 [Startup] Running Loop=1
2014-08-21T04:14:24.393Z,1408594464.393 [Startup](INFO): Aggregate::initialize Startup
2014-08-21T04:14:24.394Z,1408594464.394 [Startup:A.GoToSurface] Running Loop=1
2014-08-21T04:14:24.394Z,1408594464.394 [Startup:A.GoToSurface](DEBUG): Initialize GoToSurfaceComponent.
2014-08-21T04:14:24.394Z,1408594464.394 [Startup:A.GoToSurface](DEBUG): No depth rate setting specified. Using default value of nan m/s.
2014-08-21T04:14:24.395Z,1408594464.395 [Startup:A.GoToSurface](DEBUG): No pitch setting specified. Using default value of nan degrees.
2014-08-21T04:14:24.395Z,1408594464.395 [Startup:A.GoToSurface](DEBUG): No speed setting specified. Using default value of 0.500000 m/s.
2014-08-21T04:14:24.401Z,1408594464.401 [Startup:StartupSatComms] Running Loop=1
2014-08-21T04:14:24.401Z,1408594464.401 [Startup:StartupSatComms](INFO): Aggregate::initialize Startup:StartupSatComms
2014-08-21T04:14:24.401Z,1408594464.401 [Startup:StartupSatComms:A] Running Loop=1
2014-08-21T04:14:24.871Z,1408594464.871 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:14:24.899Z,1408594464.899 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802380, -121.787140) is outside the bounding box
2014-08-21T04:14:24.901Z,1408594464.901 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802380, -121.787140) is outside the bounding box
2014-08-21T04:14:24.914Z,1408594464.914 [Startup:StartupSatComms:A](DEBUG): Initialize ReadDataComponent to sense latitude_fix
2014-08-21T04:14:25.310Z,1408594465.310 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:14:25.311Z,1408594465.311 [NAL9602](INFO): Powering up
2014-08-21T04:14:25.348Z,1408594465.348 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802380, -121.787140) is outside the bounding box
2014-08-21T04:14:25.350Z,1408594465.350 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802380, -121.787140) is outside the bounding box
2014-08-21T04:14:25.751Z,1408594465.751 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:14:25.764Z,1408594465.764 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802380, -121.787140) is outside the bounding box
2014-08-21T04:14:25.766Z,1408594465.766 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802380, -121.787140) is outside the bounding box
2014-08-21T04:14:26.203Z,1408594466.203 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:14:26.217Z,1408594466.217 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802380, -121.787140) is outside the bounding box
2014-08-21T04:14:26.219Z,1408594466.219 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802380, -121.787140) is outside the bounding box
2014-08-21T04:14:26.998Z,1408594466.998 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:14:27.047Z,1408594467.047 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802380, -121.787140) is outside the bounding box
2014-08-21T04:14:27.053Z,1408594467.053 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802380, -121.787140) is outside the bounding box
2014-08-21T04:14:27.484Z,1408594467.484 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:14:27.501Z,1408594467.501 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802380, -121.787140) is outside the bounding box
2014-08-21T04:14:27.503Z,1408594467.503 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802380, -121.787140) is outside the bounding box
2014-08-21T04:14:27.910Z,1408594467.910 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:14:27.924Z,1408594467.924 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802380, -121.787140) is outside the bounding box
2014-08-21T04:14:27.926Z,1408594467.926 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802380, -121.787140) is outside the bounding box
2014-08-21T04:14:28.375Z,1408594468.375 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:14:28.396Z,1408594468.396 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802380, -121.787140) is outside the bounding box
2014-08-21T04:14:28.398Z,1408594468.398 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802380, -121.787140) is outside the bounding box
2014-08-21T04:14:28.832Z,1408594468.832 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:14:28.860Z,1408594468.860 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802380, -121.787140) is outside the bounding box
2014-08-21T04:14:28.862Z,1408594468.862 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802380, -121.787140) is outside the bounding box
2014-08-21T04:14:29.320Z,1408594469.320 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:14:29.334Z,1408594469.334 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802380, -121.787140) is outside the bounding box
2014-08-21T04:14:29.336Z,1408594469.336 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802380, -121.787140) is outside the bounding box
2014-08-21T04:14:29.785Z,1408594469.785 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:14:29.810Z,1408594469.810 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802380, -121.787140) is outside the bounding box
2014-08-21T04:14:29.812Z,1408594469.812 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802380, -121.787140) is outside the bounding box
2014-08-21T04:14:30.310Z,1408594470.310 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:14:30.344Z,1408594470.344 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802380, -121.787140) is outside the bounding box
2014-08-21T04:14:30.346Z,1408594470.346 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802380, -121.787140) is outside the bounding box
2014-08-21T04:14:30.786Z,1408594470.786 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:14:30.799Z,1408594470.799 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802380, -121.787140) is outside the bounding box
2014-08-21T04:14:30.801Z,1408594470.801 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802380, -121.787140) is outside the bounding box
2014-08-21T04:14:31.231Z,1408594471.231 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:14:31.247Z,1408594471.247 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802380, -121.787140) is outside the bounding box
2014-08-21T04:14:31.249Z,1408594471.249 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802380, -121.787140) is outside the bounding box
2014-08-21T04:14:31.756Z,1408594471.756 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:14:31.784Z,1408594471.784 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802380, -121.787140) is outside the bounding box
2014-08-21T04:14:31.786Z,1408594471.786 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802380, -121.787140) is outside the bounding box
2014-08-21T04:14:32.193Z,1408594472.193 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:14:32.208Z,1408594472.208 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802380, -121.787140) is outside the bounding box
2014-08-21T04:14:32.210Z,1408594472.210 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802380, -121.787140) is outside the bounding box
2014-08-21T04:14:32.626Z,1408594472.626 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:14:32.640Z,1408594472.640 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802380, -121.787140) is outside the bounding box
2014-08-21T04:14:32.642Z,1408594472.642 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802380, -121.787140) is outside the bounding box
2014-08-21T04:14:33.042Z,1408594473.042 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:14:33.055Z,1408594473.055 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802380, -121.787140) is outside the bounding box
2014-08-21T04:14:33.057Z,1408594473.057 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802380, -121.787140) is outside the bounding box
2014-08-21T04:14:33.455Z,1408594473.455 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:14:33.515Z,1408594473.515 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802380, -121.787140) is outside the bounding box
2014-08-21T04:14:33.517Z,1408594473.517 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802380, -121.787140) is outside the bounding box
2014-08-21T04:14:33.915Z,1408594473.915 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:14:33.922Z,1408594473.922 [DAT](INFO): read user prompt: user:1>
2014-08-21T04:14:33.922Z,1408594473.922 [DAT](INFO): setting local address to 2
2014-08-21T04:14:33.924Z,1408594473.924 [DAT](INFO): bytes available on uart_: 0
2014-08-21T04:14:33.926Z,1408594473.926 [DAT](INFO): uart CANNOT read until LocalAddr 0
2014-08-21T04:14:33.927Z,1408594473.927 [DAT](INFO): uart CANNOT read until LocalAddr 0
2014-08-21T04:14:33.928Z,1408594473.928 [DAT](INFO): uart CANNOT read until LocalAddr 0
2014-08-21T04:14:33.929Z,1408594473.929 [DAT](INFO): uart CANNOT read until LocalAddr 0
2014-08-21T04:14:33.931Z,1408594473.931 [DAT](INFO): uart CANNOT read until LocalAddr 0
2014-08-21T04:14:33.933Z,1408594473.933 [DAT](ERROR): failed to set local address; deviceResponse_: user:1>
2014-08-21T04:14:33.934Z,1408594473.934 [DAT] Communications Fault, FailCount= 4
2014-08-21T04:14:33.934Z,1408594473.934 [DAT](ERROR): Communications Fault
2014-08-21T04:14:34.026Z,1408594474.026 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802380, -121.787140) is outside the bounding box
2014-08-21T04:14:34.036Z,1408594474.036 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802380, -121.787140) is outside the bounding box
2014-08-21T04:14:34.114Z,1408594474.114 [CBIT](ERROR): Communications Fault in component: DAT
2014-08-21T04:14:34.514Z,1408594474.514 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:14:34.520Z,1408594474.520 [DAT](INFO): Powering down
2014-08-21T04:14:34.659Z,1408594474.659 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802380, -121.787140) is outside the bounding box
2014-08-21T04:14:34.661Z,1408594474.661 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802380, -121.787140) is outside the bounding box
2014-08-21T04:14:35.122Z,1408594475.122 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:14:35.135Z,1408594475.135 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802380, -121.787140) is outside the bounding box
2014-08-21T04:14:35.137Z,1408594475.137 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802380, -121.787140) is outside the bounding box
2014-08-21T04:14:35.530Z,1408594475.530 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:14:35.543Z,1408594475.543 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802380, -121.787140) is outside the bounding box
2014-08-21T04:14:35.545Z,1408594475.545 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802380, -121.787140) is outside the bounding box
2014-08-21T04:14:35.598Z,1408594475.598 [CBIT](INFO): Clearing failed state for component DAT
2014-08-21T04:14:35.598Z,1408594475.598 [DAT] No Fault, FailCount= 4
2014-08-21T04:14:35.974Z,1408594475.974 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:14:36.014Z,1408594476.014 [NAL9602](INFO): NAL9602 initialized
2014-08-21T04:14:36.031Z,1408594476.031 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802380, -121.787140) is outside the bounding box
2014-08-21T04:14:36.033Z,1408594476.033 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802380, -121.787140) is outside the bounding box
2014-08-21T04:14:36.440Z,1408594476.440 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:14:36.475Z,1408594476.475 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802380, -121.787140) is outside the bounding box
2014-08-21T04:14:36.477Z,1408594476.477 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802380, -121.787140) is outside the bounding box
2014-08-21T04:14:36.868Z,1408594476.868 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:14:36.951Z,1408594476.951 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802380, -121.787140) is outside the bounding box
2014-08-21T04:14:36.953Z,1408594476.953 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802380, -121.787140) is outside the bounding box
2014-08-21T04:14:37.361Z,1408594477.361 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:14:37.397Z,1408594477.397 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802380, -121.787140) is outside the bounding box
2014-08-21T04:14:37.400Z,1408594477.400 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802380, -121.787140) is outside the bounding box
2014-08-21T04:14:37.813Z,1408594477.813 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:14:37.847Z,1408594477.847 [DAT](INFO): Powering up
2014-08-21T04:14:37.847Z,1408594477.847 [DAT](DEBUG): Initializing DAT.
2014-08-21T04:14:37.898Z,1408594477.898 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802380, -121.787140) is outside the bounding box
2014-08-21T04:14:37.900Z,1408594477.900 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802380, -121.787140) is outside the bounding box
2014-08-21T04:14:38.294Z,1408594478.294 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:14:38.309Z,1408594478.309 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802380, -121.787140) is outside the bounding box
2014-08-21T04:14:38.311Z,1408594478.311 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802380, -121.787140) is outside the bounding box
2014-08-21T04:14:38.723Z,1408594478.723 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:14:38.754Z,1408594478.754 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802380, -121.787140) is outside the bounding box
2014-08-21T04:14:38.756Z,1408594478.756 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802380, -121.787140) is outside the bounding box
2014-08-21T04:14:39.177Z,1408594479.177 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:14:39.212Z,1408594479.212 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802380, -121.787140) is outside the bounding box
2014-08-21T04:14:39.215Z,1408594479.215 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802380, -121.787140) is outside the bounding box
2014-08-21T04:14:39.620Z,1408594479.620 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:14:39.678Z,1408594479.678 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802380, -121.787140) is outside the bounding box
2014-08-21T04:14:39.680Z,1408594479.680 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802380, -121.787140) is outside the bounding box
2014-08-21T04:14:40.081Z,1408594480.081 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:14:40.134Z,1408594480.134 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802380, -121.787140) is outside the bounding box
2014-08-21T04:14:40.136Z,1408594480.136 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802380, -121.787140) is outside the bounding box
2014-08-21T04:14:40.583Z,1408594480.583 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:14:40.597Z,1408594480.597 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802380, -121.787140) is outside the bounding box
2014-08-21T04:14:40.599Z,1408594480.599 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802380, -121.787140) is outside the bounding box
2014-08-21T04:14:41.010Z,1408594481.010 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:14:41.024Z,1408594481.024 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802380, -121.787140) is outside the bounding box
2014-08-21T04:14:41.027Z,1408594481.027 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802380, -121.787140) is outside the bounding box
2014-08-21T04:14:41.423Z,1408594481.423 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:14:41.439Z,1408594481.439 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802380, -121.787140) is outside the bounding box
2014-08-21T04:14:41.441Z,1408594481.441 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802380, -121.787140) is outside the bounding box
2014-08-21T04:14:41.844Z,1408594481.844 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:14:41.858Z,1408594481.858 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802380, -121.787140) is outside the bounding box
2014-08-21T04:14:41.860Z,1408594481.860 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802380, -121.787140) is outside the bounding box
2014-08-21T04:14:42.260Z,1408594482.260 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:14:42.302Z,1408594482.302 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802380, -121.787140) is outside the bounding box
2014-08-21T04:14:42.304Z,1408594482.304 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802380, -121.787140) is outside the bounding box
2014-08-21T04:14:42.697Z,1408594482.697 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:14:42.725Z,1408594482.725 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802380, -121.787140) is outside the bounding box
2014-08-21T04:14:42.727Z,1408594482.727 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802380, -121.787140) is outside the bounding box
2014-08-21T04:14:43.134Z,1408594483.134 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:14:43.187Z,1408594483.187 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802380, -121.787140) is outside the bounding box
2014-08-21T04:14:43.190Z,1408594483.190 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802380, -121.787140) is outside the bounding box
2014-08-21T04:14:43.591Z,1408594483.591 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:14:43.608Z,1408594483.608 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802380, -121.787140) is outside the bounding box
2014-08-21T04:14:43.610Z,1408594483.610 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802380, -121.787140) is outside the bounding box
2014-08-21T04:14:44.041Z,1408594484.041 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:14:44.055Z,1408594484.055 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802380, -121.787140) is outside the bounding box
2014-08-21T04:14:44.057Z,1408594484.057 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802380, -121.787140) is outside the bounding box
2014-08-21T04:14:44.460Z,1408594484.460 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:14:44.476Z,1408594484.476 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802380, -121.787140) is outside the bounding box
2014-08-21T04:14:44.479Z,1408594484.479 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802380, -121.787140) is outside the bounding box
2014-08-21T04:14:44.893Z,1408594484.893 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:14:44.908Z,1408594484.908 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802380, -121.787140) is outside the bounding box
2014-08-21T04:14:44.910Z,1408594484.910 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802380, -121.787140) is outside the bounding box
2014-08-21T04:14:45.363Z,1408594485.363 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:14:45.389Z,1408594485.389 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802380, -121.787140) is outside the bounding box
2014-08-21T04:14:45.391Z,1408594485.391 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802380, -121.787140) is outside the bounding box
2014-08-21T04:14:45.790Z,1408594485.790 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:14:45.831Z,1408594485.831 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802380, -121.787140) is outside the bounding box
2014-08-21T04:14:45.837Z,1408594485.837 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802380, -121.787140) is outside the bounding box
2014-08-21T04:14:46.243Z,1408594486.243 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:14:46.339Z,1408594486.339 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802380, -121.787140) is outside the bounding box
2014-08-21T04:14:46.341Z,1408594486.341 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802380, -121.787140) is outside the bounding box
2014-08-21T04:14:46.761Z,1408594486.761 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:14:46.774Z,1408594486.774 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802380, -121.787140) is outside the bounding box
2014-08-21T04:14:46.776Z,1408594486.776 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802380, -121.787140) is outside the bounding box
2014-08-21T04:14:47.180Z,1408594487.180 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:14:47.196Z,1408594487.196 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802380, -121.787140) is outside the bounding box
2014-08-21T04:14:47.198Z,1408594487.198 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802380, -121.787140) is outside the bounding box
2014-08-21T04:14:47.614Z,1408594487.614 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:14:47.627Z,1408594487.627 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802380, -121.787140) is outside the bounding box
2014-08-21T04:14:47.629Z,1408594487.629 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802380, -121.787140) is outside the bounding box
2014-08-21T04:14:48.042Z,1408594488.042 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:14:48.082Z,1408594488.082 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802380, -121.787140) is outside the bounding box
2014-08-21T04:14:48.084Z,1408594488.084 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802380, -121.787140) is outside the bounding box
2014-08-21T04:14:48.486Z,1408594488.486 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:14:48.531Z,1408594488.531 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802380, -121.787140) is outside the bounding box
2014-08-21T04:14:48.533Z,1408594488.533 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802380, -121.787140) is outside the bounding box
2014-08-21T04:14:48.959Z,1408594488.959 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:14:48.988Z,1408594488.988 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802380, -121.787140) is outside the bounding box
2014-08-21T04:14:48.991Z,1408594488.991 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802380, -121.787140) is outside the bounding box
2014-08-21T04:14:49.396Z,1408594489.396 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:14:49.458Z,1408594489.458 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802380, -121.787140) is outside the bounding box
2014-08-21T04:14:49.464Z,1408594489.464 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802380, -121.787140) is outside the bounding box
2014-08-21T04:14:49.879Z,1408594489.879 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:14:49.893Z,1408594489.893 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802380, -121.787140) is outside the bounding box
2014-08-21T04:14:49.896Z,1408594489.896 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802380, -121.787140) is outside the bounding box
2014-08-21T04:14:50.309Z,1408594490.309 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:14:50.341Z,1408594490.341 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802380, -121.787140) is outside the bounding box
2014-08-21T04:14:50.343Z,1408594490.343 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802380, -121.787140) is outside the bounding box
2014-08-21T04:14:50.799Z,1408594490.799 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:14:50.819Z,1408594490.819 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802380, -121.787140) is outside the bounding box
2014-08-21T04:14:50.821Z,1408594490.821 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802380, -121.787140) is outside the bounding box
2014-08-21T04:14:51.238Z,1408594491.238 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:14:51.273Z,1408594491.273 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802380, -121.787140) is outside the bounding box
2014-08-21T04:14:51.290Z,1408594491.290 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802380, -121.787140) is outside the bounding box
2014-08-21T04:14:51.691Z,1408594491.691 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:14:51.759Z,1408594491.759 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802380, -121.787140) is outside the bounding box
2014-08-21T04:14:51.761Z,1408594491.761 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802380, -121.787140) is outside the bounding box
2014-08-21T04:14:52.220Z,1408594492.220 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:14:52.279Z,1408594492.279 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802380, -121.787140) is outside the bounding box
2014-08-21T04:14:52.280Z,1408594492.280 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802380, -121.787140) is outside the bounding box
2014-08-21T04:14:52.742Z,1408594492.742 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:14:52.833Z,1408594492.833 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802380, -121.787140) is outside the bounding box
2014-08-21T04:14:52.835Z,1408594492.835 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802380, -121.787140) is outside the bounding box
2014-08-21T04:14:53.322Z,1408594493.322 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:14:53.371Z,1408594493.371 [DAT](INFO): read user prompt: user:1>
2014-08-21T04:14:53.371Z,1408594493.371 [DAT](INFO): setting local address to 2
2014-08-21T04:14:53.374Z,1408594493.374 [DAT](INFO): bytes available on uart_: 0
2014-08-21T04:14:53.375Z,1408594493.375 [DAT](INFO): uart CANNOT read until LocalAddr 0
2014-08-21T04:14:53.376Z,1408594493.376 [DAT](INFO): uart CANNOT read until LocalAddr 0
2014-08-21T04:14:53.377Z,1408594493.377 [DAT](INFO): uart CANNOT read until LocalAddr 0
2014-08-21T04:14:53.379Z,1408594493.379 [DAT](INFO): uart CANNOT read until LocalAddr 0
2014-08-21T04:14:53.380Z,1408594493.380 [DAT](INFO): uart CANNOT read until LocalAddr 0
2014-08-21T04:14:53.451Z,1408594493.451 [DAT](INFO): bytes: 
LocalAddr       | 2           
user
2014-08-21T04:14:53.451Z,1408594493.451 [DAT](ERROR): failed to set local address; deviceResponse_: user:1>
2014-08-21T04:14:53.451Z,1408594493.451 [DAT] Communications Fault, FailCount= 5
2014-08-21T04:14:53.451Z,1408594493.451 [DAT](ERROR): Communications Fault
2014-08-21T04:14:53.547Z,1408594493.547 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802380, -121.787140) is outside the bounding box
2014-08-21T04:14:53.549Z,1408594493.549 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802380, -121.787140) is outside the bounding box
2014-08-21T04:14:53.632Z,1408594493.632 [CBIT](ERROR): Communications Fault in component: DAT
2014-08-21T04:14:54.111Z,1408594494.111 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:14:54.124Z,1408594494.124 [DAT](INFO): Powering down
2014-08-21T04:14:54.260Z,1408594494.260 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802380, -121.787140) is outside the bounding box
2014-08-21T04:14:54.266Z,1408594494.266 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802380, -121.787140) is outside the bounding box
2014-08-21T04:14:54.733Z,1408594494.733 [Batt_Ocean_Server](ERROR): Battery controller B communication timeout. Re-initializing
2014-08-21T04:14:54.736Z,1408594494.736 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:14:54.785Z,1408594494.785 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802380, -121.787140) is outside the bounding box
2014-08-21T04:14:54.787Z,1408594494.787 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802380, -121.787140) is outside the bounding box
2014-08-21T04:14:55.298Z,1408594495.298 [Batt_Ocean_Server] Communications Fault, FailCount= 2
2014-08-21T04:14:55.299Z,1408594495.299 [Batt_Ocean_Server](ERROR): Communications Fault
2014-08-21T04:14:56.618Z,1408594496.618 [Batt_Ocean_Server](ERROR): Batt_Ocean_Server A initialization uart error: serial timeout
2014-08-21T04:14:56.618Z,1408594496.618 [Batt_Ocean_Server](ERROR): Ocean Server Batteries failed to initialize. Re-initializing
2014-08-21T04:14:56.623Z,1408594496.623 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:14:56.800Z,1408594496.800 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802380, -121.787140) is outside the bounding box
2014-08-21T04:14:56.810Z,1408594496.810 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802380, -121.787140) is outside the bounding box
2014-08-21T04:14:56.882Z,1408594496.882 [CBIT](ERROR): Communications Fault in component: Batt_Ocean_Server
2014-08-21T04:14:56.883Z,1408594496.883 [CBIT](INFO): Clearing failed state for component DAT
2014-08-21T04:14:56.883Z,1408594496.883 [DAT] No Fault, FailCount= 5
2014-08-21T04:14:57.353Z,1408594497.353 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:14:57.419Z,1408594497.419 [DAT](INFO): Powering up
2014-08-21T04:14:57.419Z,1408594497.419 [DAT](DEBUG): Initializing DAT.
2014-08-21T04:14:57.478Z,1408594497.478 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802380, -121.787140) is outside the bounding box
2014-08-21T04:14:57.481Z,1408594497.481 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802380, -121.787140) is outside the bounding box
2014-08-21T04:14:57.561Z,1408594497.561 [CBIT](INFO): Clearing failed state for component Batt_Ocean_Server
2014-08-21T04:14:57.561Z,1408594497.561 [Batt_Ocean_Server] No Fault, FailCount= 2
2014-08-21T04:14:59.803Z,1408594499.803 [Batt_Ocean_Server](INFO): Ocean Server Batteries initialized
2014-08-21T04:14:59.832Z,1408594499.832 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:14:59.890Z,1408594499.890 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802380, -121.787140) is outside the bounding box
2014-08-21T04:14:59.909Z,1408594499.909 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802380, -121.787140) is outside the bounding box
2014-08-21T04:15:00.414Z,1408594500.414 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:15:00.540Z,1408594500.540 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802380, -121.787140) is outside the bounding box
2014-08-21T04:15:00.542Z,1408594500.542 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802380, -121.787140) is outside the bounding box
2014-08-21T04:15:01.011Z,1408594501.011 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:15:01.047Z,1408594501.047 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802380, -121.787140) is outside the bounding box
2014-08-21T04:15:01.078Z,1408594501.078 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802380, -121.787140) is outside the bounding box
2014-08-21T04:15:01.522Z,1408594501.522 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:15:01.580Z,1408594501.580 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802380, -121.787140) is outside the bounding box
2014-08-21T04:15:01.587Z,1408594501.587 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802380, -121.787140) is outside the bounding box
2014-08-21T04:15:02.027Z,1408594502.027 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:15:02.084Z,1408594502.084 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802380, -121.787140) is outside the bounding box
2014-08-21T04:15:02.091Z,1408594502.091 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802380, -121.787140) is outside the bounding box
2014-08-21T04:15:02.524Z,1408594502.524 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:15:02.603Z,1408594502.603 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802380, -121.787140) is outside the bounding box
2014-08-21T04:15:02.604Z,1408594502.604 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802380, -121.787140) is outside the bounding box
2014-08-21T04:15:03.053Z,1408594503.053 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:15:03.137Z,1408594503.137 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802380, -121.787140) is outside the bounding box
2014-08-21T04:15:03.139Z,1408594503.139 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802380, -121.787140) is outside the bounding box
2014-08-21T04:15:03.630Z,1408594503.630 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:15:03.741Z,1408594503.741 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802380, -121.787140) is outside the bounding box
2014-08-21T04:15:03.743Z,1408594503.743 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802380, -121.787140) is outside the bounding box
2014-08-21T04:15:04.207Z,1408594504.207 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:15:04.261Z,1408594504.261 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802380, -121.787140) is outside the bounding box
2014-08-21T04:15:04.267Z,1408594504.267 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802380, -121.787140) is outside the bounding box
2014-08-21T04:15:04.765Z,1408594504.765 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:15:04.809Z,1408594504.809 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802380, -121.787140) is outside the bounding box
2014-08-21T04:15:04.815Z,1408594504.815 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802380, -121.787140) is outside the bounding box
2014-08-21T04:15:05.358Z,1408594505.358 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:15:05.366Z,1408594505.366 [NAL9602](IMPORTANT): GPS fix at: 1408594503.00
2014-08-21T04:15:05.424Z,1408594505.424 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802380, -121.787140) is outside the bounding box
2014-08-21T04:15:05.426Z,1408594505.426 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802380, -121.787140) is outside the bounding box
2014-08-21T04:15:05.470Z,1408594505.470 [Startup:StartupSatComms:A] Stopped
2014-08-21T04:15:05.470Z,1408594505.470 [Startup:StartupSatComms:B] Running Loop=1
2014-08-21T04:15:05.905Z,1408594505.905 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:15:05.983Z,1408594505.983 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:15:05.985Z,1408594505.985 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:15:06.013Z,1408594506.013 [Startup:StartupSatComms:B](DEBUG): Initialize ReadDataComponent to sense platform_communications
2014-08-21T04:15:07.452Z,1408594507.452 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:15:07.627Z,1408594507.627 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:15:07.629Z,1408594507.629 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:15:08.139Z,1408594508.139 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:15:08.202Z,1408594508.202 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:15:08.212Z,1408594508.212 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:15:10.176Z,1408594510.176 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:15:10.219Z,1408594510.219 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:15:10.243Z,1408594510.243 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:15:10.992Z,1408594510.992 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20140821T040819/Courier0008.lzma
2014-08-21T04:15:11.002Z,1408594511.002 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:15:11.167Z,1408594511.167 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:15:11.182Z,1408594511.182 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:15:11.711Z,1408594511.711 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:15:11.742Z,1408594511.742 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:15:11.744Z,1408594511.744 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:15:12.230Z,1408594512.230 [DataOverHttps](INFO): Moved sent file to Logs/20140821T040819/Courier0008.lzma.bak
2014-08-21T04:15:12.230Z,1408594512.230 [DataOverHttps](INFO): SBD MOMSN=1090143
2014-08-21T04:15:12.235Z,1408594512.235 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:15:12.308Z,1408594512.308 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:15:12.319Z,1408594512.319 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:15:13.233Z,1408594513.233 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:15:13.234Z,1408594513.234 [NAL9602](INFO): Powering down
2014-08-21T04:15:13.312Z,1408594513.312 [DAT](INFO): read user prompt: user:1>
2014-08-21T04:15:13.313Z,1408594513.313 [DAT](INFO): setting local address to 2
2014-08-21T04:15:13.356Z,1408594513.356 [DAT](INFO): bytes available on uart_: 0
2014-08-21T04:15:13.357Z,1408594513.357 [DAT](INFO): uart CANNOT read until LocalAddr 8
2014-08-21T04:15:13.357Z,1408594513.357 [DAT](INFO): bytes: 
LocalA\
!
2014-08-21T04:15:13.357Z,1408594513.357 [DAT](INFO): uart CANNOT read until LocalAddr 0
2014-08-21T04:15:13.358Z,1408594513.358 [DAT](INFO): bytes: d
!
2014-08-21T04:15:13.358Z,1408594513.358 [DAT](INFO): uart CANNOT read until LocalAddr 0
2014-08-21T04:15:13.358Z,1408594513.358 [DAT](INFO): uart CANNOT read until LocalAddr 0
2014-08-21T04:15:13.358Z,1408594513.358 [DAT](INFO): uart CANNOT read until LocalAddr 0
2014-08-21T04:15:13.359Z,1408594513.359 [DAT](ERROR): failed to set local address; deviceResponse_: user:1>
2014-08-21T04:15:13.359Z,1408594513.359 [DAT] Communications Fault, FailCount= 6
2014-08-21T04:15:13.359Z,1408594513.359 [DAT](ERROR): Communications Fault
2014-08-21T04:15:13.453Z,1408594513.453 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:15:13.472Z,1408594513.472 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:15:13.547Z,1408594513.547 [CBIT](ERROR): Communications Fault in component: DAT
2014-08-21T04:15:14.006Z,1408594514.006 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:15:14.012Z,1408594514.012 [DAT](INFO): Powering down
2014-08-21T04:15:14.214Z,1408594514.214 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:15:14.216Z,1408594514.216 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:15:16.330Z,1408594516.330 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:15:16.449Z,1408594516.449 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:15:16.451Z,1408594516.451 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:15:17.151Z,1408594517.151 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:15:17.176Z,1408594517.176 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:15:17.194Z,1408594517.194 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:15:17.263Z,1408594517.263 [CBIT](INFO): Clearing failed state for component DAT
2014-08-21T04:15:17.263Z,1408594517.263 [DAT] No Fault, FailCount= 6
2014-08-21T04:15:17.724Z,1408594517.724 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:15:17.730Z,1408594517.730 [DAT](INFO): Powering up
2014-08-21T04:15:17.763Z,1408594517.763 [DAT](DEBUG): Initializing DAT.
2014-08-21T04:15:17.800Z,1408594517.800 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:15:17.802Z,1408594517.802 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:15:18.268Z,1408594518.268 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:15:18.302Z,1408594518.302 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:15:18.308Z,1408594518.308 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:15:18.753Z,1408594518.753 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:15:18.811Z,1408594518.811 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:15:18.813Z,1408594518.813 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:15:19.371Z,1408594519.371 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:15:19.467Z,1408594519.467 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:15:19.468Z,1408594519.468 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:15:21.080Z,1408594521.080 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:15:21.179Z,1408594521.179 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:15:21.189Z,1408594521.189 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:15:21.826Z,1408594521.826 [DataOverHttps](INFO): Sending 237 bytes from file Logs/20140821T041253/Courier0000.lzma
2014-08-21T04:15:21.872Z,1408594521.872 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:15:21.950Z,1408594521.950 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:15:21.952Z,1408594521.952 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:15:22.480Z,1408594522.480 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:15:22.556Z,1408594522.556 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:15:22.579Z,1408594522.579 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:15:23.006Z,1408594523.006 [DataOverHttps](INFO): Moved sent file to Logs/20140821T041253/Courier0000.lzma.bak
2014-08-21T04:15:23.007Z,1408594523.007 [DataOverHttps](INFO): SBD MOMSN=1090145
2014-08-21T04:15:23.039Z,1408594523.039 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:15:23.088Z,1408594523.088 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:15:23.090Z,1408594523.090 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:15:24.278Z,1408594524.278 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:15:24.331Z,1408594524.331 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:15:24.337Z,1408594524.337 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:15:24.967Z,1408594524.967 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:15:25.108Z,1408594525.108 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:15:25.126Z,1408594525.126 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:15:27.130Z,1408594527.130 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:15:27.160Z,1408594527.160 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:15:27.183Z,1408594527.183 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:15:27.703Z,1408594527.703 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:15:27.797Z,1408594527.797 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:15:27.799Z,1408594527.799 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:15:28.308Z,1408594528.308 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:15:28.342Z,1408594528.342 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:15:28.380Z,1408594528.380 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:15:28.829Z,1408594528.829 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:15:28.855Z,1408594528.855 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:15:28.857Z,1408594528.857 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:15:29.363Z,1408594529.363 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:15:29.389Z,1408594529.389 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:15:29.391Z,1408594529.391 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:15:29.828Z,1408594529.828 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:15:29.964Z,1408594529.964 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:15:29.967Z,1408594529.967 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:15:31.870Z,1408594531.870 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:15:31.911Z,1408594531.911 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:15:31.934Z,1408594531.934 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:15:32.646Z,1408594532.646 [DataOverHttps](INFO): Sending 130 bytes from file Logs/20140821T040819/Express0009.lzma
2014-08-21T04:15:32.650Z,1408594532.650 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:15:32.728Z,1408594532.728 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:15:32.738Z,1408594532.738 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:15:33.236Z,1408594533.236 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:15:33.257Z,1408594533.257 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:15:33.291Z,1408594533.291 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:15:33.719Z,1408594533.719 [DataOverHttps](INFO): Moved sent file to Logs/20140821T040819/Express0009.lzma.bak
2014-08-21T04:15:33.719Z,1408594533.719 [DataOverHttps](INFO): SBD MOMSN=1090149
2014-08-21T04:15:33.728Z,1408594533.728 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:15:33.735Z,1408594533.735 [DAT](INFO): read user prompt: user:1>
2014-08-21T04:15:33.736Z,1408594533.736 [DAT](INFO): setting local address to 2
2014-08-21T04:15:33.738Z,1408594533.738 [DAT](INFO): bytes available on uart_: 0
2014-08-21T04:15:33.739Z,1408594533.739 [DAT](INFO): uart CANNOT read until LocalAddr 0
2014-08-21T04:15:33.740Z,1408594533.740 [DAT](INFO): uart CANNOT read until LocalAddr 0
2014-08-21T04:15:33.742Z,1408594533.742 [DAT](INFO): uart CANNOT read until LocalAddr 0
2014-08-21T04:15:33.743Z,1408594533.743 [DAT](INFO): uart CANNOT read until LocalAddr 0
2014-08-21T04:15:33.745Z,1408594533.745 [DAT](INFO): uart CANNOT read until LocalAddr 0
2014-08-21T04:15:33.746Z,1408594533.746 [DAT](ERROR): failed to set local address; deviceResponse_: user:1>
2014-08-21T04:15:33.747Z,1408594533.747 [DAT] Communications Fault, FailCount= 7
2014-08-21T04:15:33.747Z,1408594533.747 [DAT](ERROR): Communications Fault
2014-08-21T04:15:33.756Z,1408594533.756 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:15:33.758Z,1408594533.758 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:15:33.904Z,1408594533.904 [CBIT](ERROR): Communications Fault in component: DAT
2014-08-21T04:15:34.595Z,1408594534.595 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:15:34.620Z,1408594534.620 [DAT](INFO): Powering down
2014-08-21T04:15:34.748Z,1408594534.748 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:15:34.750Z,1408594534.750 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:15:35.211Z,1408594535.211 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:15:35.225Z,1408594535.225 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:15:35.227Z,1408594535.227 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:15:36.091Z,1408594536.091 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:15:36.104Z,1408594536.104 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:15:36.106Z,1408594536.106 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:15:36.128Z,1408594536.128 [CBIT](INFO): Clearing failed state for component DAT
2014-08-21T04:15:36.128Z,1408594536.128 [DAT] No Fault, FailCount= 7
2014-08-21T04:15:36.597Z,1408594536.597 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:15:36.611Z,1408594536.611 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:15:36.613Z,1408594536.613 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:15:37.045Z,1408594537.045 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:15:37.058Z,1408594537.058 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:15:37.061Z,1408594537.061 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:15:37.484Z,1408594537.484 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:15:37.497Z,1408594537.497 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:15:37.499Z,1408594537.499 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:15:37.903Z,1408594537.903 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:15:37.929Z,1408594537.929 [DAT](INFO): Powering up
2014-08-21T04:15:37.949Z,1408594537.949 [DAT](DEBUG): Initializing DAT.
2014-08-21T04:15:37.987Z,1408594537.987 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:15:37.989Z,1408594537.989 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:15:38.412Z,1408594538.412 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:15:38.426Z,1408594538.426 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:15:38.428Z,1408594538.428 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:15:39.306Z,1408594539.306 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:15:39.319Z,1408594539.319 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:15:39.321Z,1408594539.321 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:15:39.763Z,1408594539.763 [DataOverHttps](INFO): Sending 976 bytes from file Logs/20140821T041253/Express0001.lzma
2014-08-21T04:15:39.769Z,1408594539.769 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:15:39.782Z,1408594539.782 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:15:39.784Z,1408594539.784 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:15:40.210Z,1408594540.210 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:15:40.224Z,1408594540.224 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:15:40.230Z,1408594540.230 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:15:40.634Z,1408594540.634 [DataOverHttps](INFO): Moved sent file to Logs/20140821T041253/Express0001.lzma.bak
2014-08-21T04:15:40.634Z,1408594540.634 [DataOverHttps](INFO): SBD MOMSN=1090152
2014-08-21T04:15:40.643Z,1408594540.643 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:15:40.688Z,1408594540.688 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:15:40.690Z,1408594540.690 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:15:41.447Z,1408594541.447 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:15:41.488Z,1408594541.488 [HFRadarCompactModelForecaster](DEBUG): Did not find new historical expansion coefficients.
2014-08-21T04:15:41.490Z,1408594541.490 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:15:41.492Z,1408594541.492 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:15:41.541Z,1408594541.541 [Startup:StartupSatComms:B] Stopped
2014-08-21T04:15:41.542Z,1408594541.542 [Startup:StartupSatComms](INFO): Completed Startup:StartupSatComms
2014-08-21T04:15:41.542Z,1408594541.542 [Startup:StartupSatComms] Stopped
2014-08-21T04:15:41.542Z,1408594541.542 [Startup:StartupSatComms](INFO): Aggregate::uninitialize Startup:StartupSatComms
2014-08-21T04:15:41.543Z,1408594541.543 [Startup](INFO): Completed Startup
2014-08-21T04:15:41.543Z,1408594541.543 [Startup] Stopped
2014-08-21T04:15:41.543Z,1408594541.543 [Startup](INFO): Aggregate::uninitialize Startup
2014-08-21T04:15:41.543Z,1408594541.543 [Startup:A.GoToSurface] Stopped
2014-08-21T04:15:41.543Z,1408594541.543 [Startup:A.GoToSurface](DEBUG): Uninitialize GoToSurfaceComponent.
2014-08-21T04:15:41.945Z,1408594541.945 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:15:41.959Z,1408594541.959 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:15:41.961Z,1408594541.961 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:15:41.999Z,1408594541.999 [MissionManager](IMPORTANT): Started mission Default
2014-08-21T04:15:41.999Z,1408594541.999 [Default] Running Loop=1
2014-08-21T04:15:41.999Z,1408594541.999 [Default](INFO): Aggregate::initialize Default
2014-08-21T04:15:41.999Z,1408594541.999 [Default:B.GoToSurface] Running Loop=1
2014-08-21T04:15:41.999Z,1408594541.999 [Default:B.GoToSurface](DEBUG): Initialize GoToSurfaceComponent.
2014-08-21T04:15:42.004Z,1408594542.004 [Default:B.GoToSurface](DEBUG): No depth rate setting specified. Using default value of nan m/s.
2014-08-21T04:15:42.004Z,1408594542.004 [Default:B.GoToSurface](DEBUG): No pitch setting specified. Using default value of nan degrees.
2014-08-21T04:15:42.004Z,1408594542.004 [Default:B.GoToSurface](DEBUG): No speed setting specified. Using default value of 0.500000 m/s.
2014-08-21T04:15:42.005Z,1408594542.005 [Default:StartClock] Running Loop=1
2014-08-21T04:15:42.005Z,1408594542.005 [Default:StartClock](INFO): Aggregate::initialize Default:StartClock
2014-08-21T04:15:42.005Z,1408594542.005 [Default:StartClock:A] Running Loop=1
2014-08-21T04:15:42.017Z,1408594542.017 [Default:StartClock:A] Stopped
2014-08-21T04:15:42.018Z,1408594542.018 [Default:StartClock](INFO): Completed Default:StartClock
2014-08-21T04:15:42.018Z,1408594542.018 [Default:StartClock] Stopped
2014-08-21T04:15:42.018Z,1408594542.018 [Default:StartClock](INFO): Aggregate::uninitialize Default:StartClock
2014-08-21T04:15:42.895Z,1408594542.895 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:15:42.909Z,1408594542.909 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:15:42.911Z,1408594542.911 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:15:42.942Z,1408594542.942 [Default:WaitAtTheSurface] Running Loop=1
2014-08-21T04:15:42.942Z,1408594542.942 [Default:WaitAtTheSurface](INFO): Aggregate::initialize Default:WaitAtTheSurface
2014-08-21T04:15:42.942Z,1408594542.942 [Default:WaitAtTheSurface:RunApplicationAtLowSpeed.SetSpeed] Running Loop=1
2014-08-21T04:15:42.942Z,1408594542.942 [Default:WaitAtTheSurface:RunApplicationAtLowSpeed.SetSpeed](DEBUG): Initialize.
2014-08-21T04:15:43.342Z,1408594543.342 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:15:43.356Z,1408594543.356 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:15:43.358Z,1408594543.358 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:15:43.372Z,1408594543.372 [Default:WaitAtTheSurface:RunApplicationAtLowSpeed.SetSpeed] Running Loop=1
2014-08-21T04:15:48.477Z,1408594548.477 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:15:48.527Z,1408594548.527 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:15:48.529Z,1408594548.529 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:15:53.496Z,1408594553.496 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:15:53.514Z,1408594553.514 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:15:53.516Z,1408594553.516 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:15:58.475Z,1408594558.475 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:15:58.530Z,1408594558.530 [DAT](FAULT): failed to initialize; deviceResponse_:CONNECT 00800 bits/sec
nsponder version 8.3.1

2014-08-21T04:15:58.530Z,1408594558.530 [DAT] Communications Fault, FailCount= 8
2014-08-21T04:15:58.530Z,1408594558.530 [DAT](ERROR): Communications Fault
2014-08-21T04:15:58.537Z,1408594558.537 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:15:58.539Z,1408594558.539 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:15:58.634Z,1408594558.634 [CBIT](ERROR): Communications Fault in component: DAT
2014-08-21T04:15:58.634Z,1408594558.634 [CBIT](CRITICAL): Communications Fault in component: DAT
2014-08-21T04:16:03.502Z,1408594563.502 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:16:03.508Z,1408594563.508 [DAT](INFO): Powering down
2014-08-21T04:16:03.644Z,1408594563.644 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:16:03.646Z,1408594563.646 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:16:08.454Z,1408594568.454 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:16:08.501Z,1408594568.501 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:16:08.503Z,1408594568.503 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:16:13.455Z,1408594573.455 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:16:13.476Z,1408594573.476 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:16:13.482Z,1408594573.482 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:16:18.467Z,1408594578.467 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:16:18.507Z,1408594578.507 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:16:18.509Z,1408594578.509 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:16:23.521Z,1408594583.521 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:16:23.546Z,1408594583.546 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:16:23.549Z,1408594583.549 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:16:28.470Z,1408594588.470 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:16:28.510Z,1408594588.510 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:16:28.512Z,1408594588.512 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:16:33.474Z,1408594593.474 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:16:33.500Z,1408594593.500 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:16:33.502Z,1408594593.502 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:16:38.489Z,1408594598.489 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:16:38.489Z,1408594598.489 [DVL_micro](FAULT): DVL failed to acquire valid data within timeout.
2014-08-21T04:16:38.489Z,1408594598.489 [DVL_micro] Data Fault, FailCount= 1
2014-08-21T04:16:38.489Z,1408594598.489 [DVL_micro](ERROR): Data Fault
2014-08-21T04:16:38.502Z,1408594598.502 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:16:38.504Z,1408594598.504 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:16:38.529Z,1408594598.529 [CBIT](ERROR): Data Fault in component: DVL_micro
2014-08-21T04:16:43.560Z,1408594603.560 [DVL_micro](INFO): uninitialize:Powering down
2014-08-21T04:16:43.607Z,1408594603.607 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:16:43.609Z,1408594603.609 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:16:48.472Z,1408594608.472 [DVL_micro](FAULT): LCB fault:  Software Overcurrent.
2014-08-21T04:16:48.472Z,1408594608.472 [DVL_micro] Hardware Fault, FailCount= 1
2014-08-21T04:16:48.472Z,1408594608.472 [DVL_micro](ERROR): Hardware Fault
2014-08-21T04:16:48.518Z,1408594608.518 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:16:48.520Z,1408594608.520 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:16:53.960Z,1408594613.960 [DVL_micro](INFO): Initializing
2014-08-21T04:16:53.974Z,1408594613.974 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:16:53.976Z,1408594613.976 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:16:54.043Z,1408594614.043 [CBIT](INFO): Clearing failed state for component DVL_micro
2014-08-21T04:16:54.043Z,1408594614.043 [DVL_micro] No Fault, FailCount= 1
2014-08-21T04:16:58.497Z,1408594618.497 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:16:58.515Z,1408594618.515 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:17:03.480Z,1408594623.480 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:17:03.482Z,1408594623.482 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:17:08.483Z,1408594628.483 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:17:08.485Z,1408594628.485 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:17:13.488Z,1408594633.488 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:17:13.538Z,1408594633.538 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:17:13.540Z,1408594633.540 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:17:18.488Z,1408594638.488 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:17:18.501Z,1408594638.501 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:17:18.503Z,1408594638.503 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:17:23.516Z,1408594643.516 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:17:23.549Z,1408594643.549 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:17:23.551Z,1408594643.551 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:17:28.474Z,1408594648.474 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:17:28.487Z,1408594648.487 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:17:28.489Z,1408594648.489 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:17:33.467Z,1408594653.467 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:17:33.500Z,1408594653.500 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:17:33.502Z,1408594653.502 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:17:38.463Z,1408594658.463 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:17:38.484Z,1408594658.484 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:17:38.486Z,1408594658.486 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:17:43.425Z,1408594663.425 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:17:43.559Z,1408594663.559 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:17:43.561Z,1408594663.561 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:17:48.511Z,1408594668.511 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:17:48.533Z,1408594668.533 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:17:48.535Z,1408594668.535 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:17:53.431Z,1408594673.431 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:17:53.488Z,1408594673.488 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:17:53.490Z,1408594673.490 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:17:58.921Z,1408594678.921 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:17:58.948Z,1408594678.948 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:17:58.950Z,1408594678.950 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:18:03.465Z,1408594683.465 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:18:03.530Z,1408594683.530 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:18:03.536Z,1408594683.536 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:18:08.453Z,1408594688.453 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:18:08.466Z,1408594688.466 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:18:08.468Z,1408594688.468 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:18:13.473Z,1408594693.473 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:18:13.537Z,1408594693.537 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:18:13.539Z,1408594693.539 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:18:18.481Z,1408594698.481 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:18:18.494Z,1408594698.494 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:18:18.512Z,1408594698.512 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:18:23.477Z,1408594703.477 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:18:23.554Z,1408594703.554 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:18:23.556Z,1408594703.556 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:18:23.570Z,1408594703.570 [Default:UpdateAndReportMinutesSinceMissionStarted] Running Loop=1
2014-08-21T04:18:23.570Z,1408594703.570 [Default:UpdateAndReportMinutesSinceMissionStarted](INFO): Aggregate::initialize Default:UpdateAndReportMinutesSinceMissionStarted
2014-08-21T04:18:23.570Z,1408594703.570 [Default:UpdateAndReportMinutesSinceMissionStarted:A] Running Loop=1
2014-08-21T04:18:23.572Z,1408594703.572 [Default:UpdateAndReportMinutesSinceMissionStarted:A] Stopped
2014-08-21T04:18:23.572Z,1408594703.572 [Default:UpdateAndReportMinutesSinceMissionStarted:B] Running Loop=1
2014-08-21T04:18:28.466Z,1408594708.466 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:18:28.479Z,1408594708.479 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:18:28.481Z,1408594708.481 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:18:28.497Z,1408594708.497 [Default:UpdateAndReportMinutesSinceMissionStarted:B](IMPORTANT): Default mission has been running for 2.689900 min 
2014-08-21T04:18:28.499Z,1408594708.499 [Default:UpdateAndReportMinutesSinceMissionStarted:B] Stopped
2014-08-21T04:18:28.499Z,1408594708.499 [Default:UpdateAndReportMinutesSinceMissionStarted](INFO): Completed Default:UpdateAndReportMinutesSinceMissionStarted
2014-08-21T04:18:28.499Z,1408594708.499 [Default:UpdateAndReportMinutesSinceMissionStarted] Stopped
2014-08-21T04:18:28.499Z,1408594708.499 [Default:UpdateAndReportMinutesSinceMissionStarted](INFO): Aggregate::uninitialize Default:UpdateAndReportMinutesSinceMissionStarted
2014-08-21T04:18:33.475Z,1408594713.475 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:18:33.506Z,1408594713.506 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:18:33.508Z,1408594713.508 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:18:38.483Z,1408594718.483 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:18:38.496Z,1408594718.496 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:18:38.498Z,1408594718.498 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:18:43.499Z,1408594723.499 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:18:43.570Z,1408594723.570 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:18:43.572Z,1408594723.572 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:18:48.482Z,1408594728.482 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:18:48.495Z,1408594728.495 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:18:48.497Z,1408594728.497 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:18:53.472Z,1408594733.472 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:18:53.511Z,1408594733.511 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:18:53.513Z,1408594733.513 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:18:58.477Z,1408594738.477 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:18:58.499Z,1408594738.499 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:18:58.501Z,1408594738.501 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:19:03.995Z,1408594743.995 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:19:04.028Z,1408594744.028 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:19:04.046Z,1408594744.046 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:19:08.473Z,1408594748.473 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:19:08.501Z,1408594748.501 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:19:08.503Z,1408594748.503 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:19:13.475Z,1408594753.475 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:19:13.523Z,1408594753.523 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:19:13.525Z,1408594753.525 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:19:18.489Z,1408594758.489 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:19:18.510Z,1408594758.510 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:19:18.512Z,1408594758.512 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:19:23.481Z,1408594763.481 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:19:23.529Z,1408594763.529 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:19:23.531Z,1408594763.531 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:19:28.473Z,1408594768.473 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:19:28.486Z,1408594768.486 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:19:28.488Z,1408594768.488 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:19:33.481Z,1408594773.481 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:19:33.529Z,1408594773.529 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:19:33.531Z,1408594773.531 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:19:38.467Z,1408594778.467 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:19:38.480Z,1408594778.480 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:19:38.482Z,1408594778.482 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:19:43.468Z,1408594783.468 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:19:43.536Z,1408594783.536 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:19:43.538Z,1408594783.538 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:19:48.464Z,1408594788.464 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:19:48.477Z,1408594788.477 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:19:48.479Z,1408594788.479 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:19:53.475Z,1408594793.475 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:19:53.507Z,1408594793.507 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:19:53.509Z,1408594793.509 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:19:58.483Z,1408594798.483 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:19:58.496Z,1408594798.496 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:19:58.499Z,1408594798.499 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:20:03.961Z,1408594803.961 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:20:03.997Z,1408594803.997 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:20:03.999Z,1408594803.999 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:20:08.471Z,1408594808.471 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:20:08.492Z,1408594808.492 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:20:08.494Z,1408594808.494 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:20:13.468Z,1408594813.468 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:20:13.508Z,1408594813.508 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:20:13.510Z,1408594813.510 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:20:18.474Z,1408594818.474 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:20:18.498Z,1408594818.498 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:20:18.501Z,1408594818.501 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:20:23.518Z,1408594823.518 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:20:23.518Z,1408594823.518 [DVL_micro](FAULT): DVL failed to acquire valid data within timeout.
2014-08-21T04:20:23.518Z,1408594823.518 [DVL_micro] Data Fault, FailCount= 1
2014-08-21T04:20:23.518Z,1408594823.518 [DVL_micro](ERROR): Data Fault
2014-08-21T04:20:23.588Z,1408594823.588 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:20:23.590Z,1408594823.590 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:20:23.613Z,1408594823.613 [CBIT](ERROR): Data Fault in component: DVL_micro
2014-08-21T04:20:28.540Z,1408594828.540 [DVL_micro](INFO): uninitialize:Powering down
2014-08-21T04:20:28.554Z,1408594828.554 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:20:28.556Z,1408594828.556 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:20:33.478Z,1408594833.478 [DVL_micro](FAULT): LCB fault:  Software Overcurrent.
2014-08-21T04:20:33.478Z,1408594833.478 [DVL_micro] Hardware Fault, FailCount= 1
2014-08-21T04:20:33.478Z,1408594833.478 [DVL_micro](ERROR): Hardware Fault
2014-08-21T04:20:33.523Z,1408594833.523 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:20:33.525Z,1408594833.525 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:20:38.491Z,1408594838.491 [DVL_micro](INFO): Initializing
2014-08-21T04:20:38.509Z,1408594838.509 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:20:38.511Z,1408594838.511 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:20:38.560Z,1408594838.560 [CBIT](INFO): Clearing failed state for component DVL_micro
2014-08-21T04:20:38.560Z,1408594838.560 [DVL_micro] No Fault, FailCount= 1
2014-08-21T04:20:43.497Z,1408594843.497 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:20:43.499Z,1408594843.499 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:20:43.513Z,1408594843.513 [Default:CheckIn] Running Loop=1
2014-08-21T04:20:43.513Z,1408594843.513 [Default:CheckIn](INFO): Aggregate::initialize Default:CheckIn
2014-08-21T04:20:43.513Z,1408594843.513 [Default:CheckIn:A.SetSpeed] Running Loop=1
2014-08-21T04:20:43.513Z,1408594843.513 [Default:CheckIn:A.SetSpeed](DEBUG): Initialize.
2014-08-21T04:20:43.513Z,1408594843.513 [Default:CheckIn:Read_GPS] Running Loop=1
2014-08-21T04:20:43.514Z,1408594843.514 [Default:CheckIn:Read_GPS](DEBUG): Initialize ReadDataComponent to sense latitude_fix
2014-08-21T04:20:43.516Z,1408594843.516 [Default:CheckIn:A.SetSpeed] Running Loop=1
2014-08-21T04:20:43.973Z,1408594843.973 [NAL9602](INFO): Powering up
2014-08-21T04:20:43.985Z,1408594843.985 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:20:43.987Z,1408594843.987 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:20:44.399Z,1408594844.399 [Batt_Ocean_Server](ERROR): Battery controller B communication timeout. Re-initializing
2014-08-21T04:20:44.413Z,1408594844.413 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:20:44.415Z,1408594844.415 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:20:44.815Z,1408594844.815 [Batt_Ocean_Server] Communications Fault, FailCount= 3
2014-08-21T04:20:44.815Z,1408594844.815 [Batt_Ocean_Server](ERROR): Communications Fault
2014-08-21T04:20:46.505Z,1408594846.505 [Batt_Ocean_Server](INFO): Ocean Server Batteries initialized
2014-08-21T04:20:46.543Z,1408594846.543 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:20:46.565Z,1408594846.565 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:20:46.608Z,1408594846.608 [CBIT](ERROR): Communications Fault in component: Batt_Ocean_Server
2014-08-21T04:20:46.608Z,1408594846.608 [CBIT](CRITICAL): Communications Fault in component: Batt_Ocean_Server
2014-08-21T04:20:47.033Z,1408594847.033 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:20:47.035Z,1408594847.035 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:20:47.451Z,1408594847.451 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:20:47.453Z,1408594847.453 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:20:47.854Z,1408594847.854 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:20:47.879Z,1408594847.879 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:20:47.881Z,1408594847.881 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:20:48.280Z,1408594848.280 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:20:48.293Z,1408594848.293 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:20:48.295Z,1408594848.295 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:20:48.704Z,1408594848.704 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:20:48.717Z,1408594848.717 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:20:48.736Z,1408594848.736 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:20:49.130Z,1408594849.130 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:20:49.142Z,1408594849.142 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:20:49.145Z,1408594849.145 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:20:49.558Z,1408594849.558 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:20:49.615Z,1408594849.615 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:20:49.621Z,1408594849.621 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:20:50.039Z,1408594850.039 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:20:50.051Z,1408594850.051 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:20:50.053Z,1408594850.053 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:20:50.454Z,1408594850.454 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:20:50.467Z,1408594850.467 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:20:50.469Z,1408594850.469 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:20:50.897Z,1408594850.897 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:20:50.909Z,1408594850.909 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:20:50.911Z,1408594850.911 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:20:51.324Z,1408594851.324 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:20:51.338Z,1408594851.338 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:20:51.340Z,1408594851.340 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:20:51.741Z,1408594851.741 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:20:51.767Z,1408594851.767 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:20:51.769Z,1408594851.769 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:20:52.182Z,1408594852.182 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:20:52.195Z,1408594852.195 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:20:52.213Z,1408594852.213 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:20:52.614Z,1408594852.614 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:20:52.648Z,1408594852.648 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:20:52.682Z,1408594852.682 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:20:53.088Z,1408594853.088 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:20:53.100Z,1408594853.100 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:20:53.102Z,1408594853.102 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:20:53.508Z,1408594853.508 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:20:53.529Z,1408594853.529 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:20:53.531Z,1408594853.531 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:20:53.949Z,1408594853.949 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:20:53.962Z,1408594853.962 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:20:53.964Z,1408594853.964 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:20:54.849Z,1408594854.849 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:20:54.863Z,1408594854.863 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:20:54.865Z,1408594854.865 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:20:55.303Z,1408594855.303 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:20:55.350Z,1408594855.350 [NAL9602](INFO): NAL9602 initialized
2014-08-21T04:20:55.367Z,1408594855.367 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:20:55.369Z,1408594855.369 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:20:55.844Z,1408594855.844 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:20:55.898Z,1408594855.898 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:20:55.904Z,1408594855.904 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:20:56.349Z,1408594856.349 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:20:56.381Z,1408594856.381 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:20:56.383Z,1408594856.383 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:20:56.785Z,1408594856.785 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:20:56.827Z,1408594856.827 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:20:56.829Z,1408594856.829 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:20:57.238Z,1408594857.238 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:20:57.278Z,1408594857.278 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:20:57.280Z,1408594857.280 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:20:57.671Z,1408594857.671 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:20:57.684Z,1408594857.684 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:20:57.686Z,1408594857.686 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:20:58.099Z,1408594858.099 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:20:58.130Z,1408594858.130 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:20:58.132Z,1408594858.132 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:20:58.524Z,1408594858.524 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:20:58.537Z,1408594858.537 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:20:58.539Z,1408594858.539 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:20:58.561Z,1408594858.561 [CBIT](INFO): Clearing failed count for component DAT
2014-08-21T04:20:58.562Z,1408594858.562 [DAT] No Fault, FailCount= 8
2014-08-21T04:20:58.949Z,1408594858.949 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:20:59.002Z,1408594859.002 [DAT](INFO): Powering up
2014-08-21T04:20:59.002Z,1408594859.002 [DAT](DEBUG): Initializing DAT.
2014-08-21T04:20:59.045Z,1408594859.045 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:20:59.051Z,1408594859.051 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:20:59.449Z,1408594859.449 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:20:59.482Z,1408594859.482 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:20:59.500Z,1408594859.500 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:20:59.894Z,1408594859.894 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:20:59.927Z,1408594859.927 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:20:59.929Z,1408594859.929 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:21:00.343Z,1408594860.343 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:21:00.357Z,1408594860.357 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:21:00.359Z,1408594860.359 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:21:00.775Z,1408594860.775 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:21:00.789Z,1408594860.789 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:21:00.809Z,1408594860.809 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:21:01.196Z,1408594861.196 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:21:01.213Z,1408594861.213 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:21:01.215Z,1408594861.215 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:21:01.625Z,1408594861.625 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:21:01.638Z,1408594861.638 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:21:01.640Z,1408594861.640 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:21:02.054Z,1408594862.054 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:21:02.121Z,1408594862.121 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:21:02.133Z,1408594862.133 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:21:02.530Z,1408594862.530 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:21:02.572Z,1408594862.572 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:21:02.574Z,1408594862.574 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:21:02.979Z,1408594862.979 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:21:03.023Z,1408594863.023 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:21:03.025Z,1408594863.025 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:21:03.420Z,1408594863.420 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:21:03.435Z,1408594863.435 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:21:03.437Z,1408594863.437 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:21:03.848Z,1408594863.848 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:21:03.862Z,1408594863.862 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:21:03.880Z,1408594863.880 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:21:04.278Z,1408594864.278 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:21:04.294Z,1408594864.294 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:21:04.296Z,1408594864.296 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:21:04.714Z,1408594864.714 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:21:04.741Z,1408594864.741 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:21:04.743Z,1408594864.743 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:21:05.138Z,1408594865.138 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:21:05.223Z,1408594865.223 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:21:05.229Z,1408594865.229 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:21:05.635Z,1408594865.635 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:21:05.667Z,1408594865.667 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:21:05.670Z,1408594865.670 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:21:06.080Z,1408594866.080 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:21:06.107Z,1408594866.107 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:21:06.109Z,1408594866.109 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:21:06.520Z,1408594866.520 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:21:06.549Z,1408594866.549 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:21:06.551Z,1408594866.551 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:21:06.940Z,1408594866.940 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:21:06.965Z,1408594866.965 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:21:06.967Z,1408594866.967 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:21:07.386Z,1408594867.386 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:21:07.417Z,1408594867.417 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:21:07.419Z,1408594867.419 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:21:07.822Z,1408594867.822 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:21:07.840Z,1408594867.840 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:21:07.842Z,1408594867.842 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:21:08.259Z,1408594868.259 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:21:08.339Z,1408594868.339 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:21:08.341Z,1408594868.341 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:21:08.756Z,1408594868.756 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:21:08.793Z,1408594868.793 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:21:08.795Z,1408594868.795 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:21:09.204Z,1408594869.204 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:21:09.249Z,1408594869.249 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:21:09.251Z,1408594869.251 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:21:09.661Z,1408594869.661 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:21:09.675Z,1408594869.675 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:21:09.677Z,1408594869.677 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:21:10.095Z,1408594870.095 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:21:10.108Z,1408594870.108 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:21:10.110Z,1408594870.110 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:21:10.526Z,1408594870.526 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:21:10.542Z,1408594870.542 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:21:10.544Z,1408594870.544 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:21:10.972Z,1408594870.972 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:21:10.987Z,1408594870.987 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:21:10.989Z,1408594870.989 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:21:11.396Z,1408594871.396 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:21:11.503Z,1408594871.503 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:21:11.505Z,1408594871.505 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:21:11.946Z,1408594871.946 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:21:11.980Z,1408594871.980 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:21:11.982Z,1408594871.982 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:21:12.398Z,1408594872.398 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:21:12.435Z,1408594872.435 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:21:12.437Z,1408594872.437 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:21:12.838Z,1408594872.838 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:21:12.864Z,1408594872.864 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:21:12.866Z,1408594872.866 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:21:13.279Z,1408594873.279 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:21:13.311Z,1408594873.311 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:21:13.313Z,1408594873.313 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:21:13.706Z,1408594873.706 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:21:13.720Z,1408594873.720 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:21:13.723Z,1408594873.723 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:21:14.132Z,1408594874.132 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:21:14.169Z,1408594874.169 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:21:14.171Z,1408594874.171 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:21:14.573Z,1408594874.573 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:21:14.638Z,1408594874.638 [DAT](INFO): read user prompt: user:1>
2014-08-21T04:21:14.639Z,1408594874.639 [DAT](INFO): setting local address to 2
2014-08-21T04:21:14.645Z,1408594874.645 [DAT](INFO): bytes available on uart_: 0
2014-08-21T04:21:14.646Z,1408594874.646 [DAT](INFO): uart CANNOT read until LocalAddr 0
2014-08-21T04:21:14.652Z,1408594874.652 [DAT](INFO): uart CANNOT read until LocalAddr 0
2014-08-21T04:21:14.652Z,1408594874.652 [DAT](INFO): uart CANNOT read until LocalAddr 0
2014-08-21T04:21:14.652Z,1408594874.652 [DAT](INFO): uart CANNOT read until LocalAddr 0
2014-08-21T04:21:14.652Z,1408594874.652 [DAT](INFO): uart CANNOT read until LocalAddr 0
2014-08-21T04:21:14.653Z,1408594874.653 [DAT](ERROR): failed to set local address; deviceResponse_: user:1>
2014-08-21T04:21:14.653Z,1408594874.653 [DAT] Communications Fault, FailCount= 1
2014-08-21T04:21:14.653Z,1408594874.653 [DAT](ERROR): Communications Fault
2014-08-21T04:21:14.669Z,1408594874.669 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:21:14.671Z,1408594874.671 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:21:14.734Z,1408594874.734 [CBIT](ERROR): Communications Fault in component: DAT
2014-08-21T04:21:15.118Z,1408594875.118 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:21:15.143Z,1408594875.143 [DAT](INFO): Powering down
2014-08-21T04:21:15.269Z,1408594875.269 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:21:15.270Z,1408594875.270 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:21:15.678Z,1408594875.678 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:21:15.692Z,1408594875.692 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:21:15.694Z,1408594875.694 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:21:16.112Z,1408594876.112 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:21:16.127Z,1408594876.127 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:21:16.129Z,1408594876.129 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:21:16.153Z,1408594876.153 [CBIT](INFO): Clearing failed state for component DAT
2014-08-21T04:21:16.153Z,1408594876.153 [DAT] No Fault, FailCount= 1
2014-08-21T04:21:16.548Z,1408594876.548 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:21:16.561Z,1408594876.561 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:21:16.563Z,1408594876.563 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:21:16.978Z,1408594876.978 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:21:17.009Z,1408594877.009 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:21:17.011Z,1408594877.011 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:21:17.425Z,1408594877.425 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:21:17.453Z,1408594877.453 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:21:17.455Z,1408594877.455 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:21:17.859Z,1408594877.859 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:21:17.939Z,1408594877.939 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:21:17.941Z,1408594877.941 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:21:18.346Z,1408594878.346 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:21:18.353Z,1408594878.353 [DAT](INFO): Powering up
2014-08-21T04:21:18.353Z,1408594878.353 [DAT](DEBUG): Initializing DAT.
2014-08-21T04:21:18.380Z,1408594878.380 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:21:18.382Z,1408594878.382 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:21:18.807Z,1408594878.807 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:21:18.821Z,1408594878.821 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:21:18.823Z,1408594878.823 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:21:19.228Z,1408594879.228 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:21:19.244Z,1408594879.244 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:21:19.267Z,1408594879.267 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:21:19.661Z,1408594879.661 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:21:19.675Z,1408594879.675 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:21:19.677Z,1408594879.677 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:21:20.077Z,1408594880.077 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:21:20.119Z,1408594880.119 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:21:20.121Z,1408594880.121 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:21:20.530Z,1408594880.530 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:21:20.570Z,1408594880.570 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:21:20.572Z,1408594880.572 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:21:20.967Z,1408594880.967 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:21:21.048Z,1408594881.048 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:21:21.054Z,1408594881.054 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:21:21.471Z,1408594881.471 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:21:21.485Z,1408594881.485 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:21:21.487Z,1408594881.487 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:21:21.892Z,1408594881.892 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:21:21.907Z,1408594881.907 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:21:21.909Z,1408594881.909 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:21:22.326Z,1408594882.326 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:21:22.342Z,1408594882.342 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:21:22.344Z,1408594882.344 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:21:22.761Z,1408594882.761 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:21:22.794Z,1408594882.794 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:21:22.800Z,1408594882.800 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:21:23.249Z,1408594883.249 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:21:23.293Z,1408594883.293 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:21:23.295Z,1408594883.295 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:21:23.703Z,1408594883.703 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:21:23.745Z,1408594883.745 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:21:23.747Z,1408594883.747 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:21:24.160Z,1408594884.160 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:21:24.220Z,1408594884.220 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:21:24.238Z,1408594884.238 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:21:24.652Z,1408594884.652 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:21:24.666Z,1408594884.666 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:21:24.668Z,1408594884.668 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:21:25.073Z,1408594885.073 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:21:25.086Z,1408594885.086 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:21:25.088Z,1408594885.088 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:21:25.494Z,1408594885.494 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:21:25.519Z,1408594885.519 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:21:25.521Z,1408594885.521 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:21:25.942Z,1408594885.942 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:21:25.968Z,1408594885.968 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:21:25.970Z,1408594885.970 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:21:26.395Z,1408594886.395 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:21:26.422Z,1408594886.422 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:21:26.424Z,1408594886.424 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:21:26.831Z,1408594886.831 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:21:26.874Z,1408594886.874 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:21:26.876Z,1408594886.876 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:21:27.313Z,1408594887.313 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:21:27.385Z,1408594887.385 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:21:27.392Z,1408594887.392 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:21:27.845Z,1408594887.845 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:21:27.859Z,1408594887.859 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:21:27.861Z,1408594887.861 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:21:28.274Z,1408594888.274 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:21:28.298Z,1408594888.298 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:21:28.301Z,1408594888.301 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:21:28.710Z,1408594888.710 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:21:28.724Z,1408594888.724 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:21:28.726Z,1408594888.726 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:21:29.140Z,1408594889.140 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:21:29.176Z,1408594889.176 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:21:29.178Z,1408594889.178 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:21:29.584Z,1408594889.584 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:21:29.588Z,1408594889.588 [NAL9602](IMPORTANT): GPS fix at: 1408594888.00
2014-08-21T04:21:29.626Z,1408594889.626 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:21:29.628Z,1408594889.628 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802425, -121.787239) is outside the bounding box
2014-08-21T04:21:29.657Z,1408594889.657 [Default:CheckIn:Read_GPS] Stopped
2014-08-21T04:21:29.657Z,1408594889.657 [Default:CheckIn:Read_Iridium] Running Loop=1
2014-08-21T04:21:30.040Z,1408594890.040 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:21:30.069Z,1408594890.069 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802433, -121.787209) is outside the bounding box
2014-08-21T04:21:30.071Z,1408594890.071 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802433, -121.787209) is outside the bounding box
2014-08-21T04:21:30.087Z,1408594890.087 [Default:CheckIn:Read_Iridium](DEBUG): Initialize ReadDataComponent to sense platform_communications
2014-08-21T04:21:30.952Z,1408594890.952 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:21:30.986Z,1408594890.986 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802433, -121.787209) is outside the bounding box
2014-08-21T04:21:30.988Z,1408594890.988 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802433, -121.787209) is outside the bounding box
2014-08-21T04:21:31.443Z,1408594891.443 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:21:31.479Z,1408594891.479 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802433, -121.787209) is outside the bounding box
2014-08-21T04:21:31.481Z,1408594891.481 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802433, -121.787209) is outside the bounding box
2014-08-21T04:21:32.352Z,1408594892.352 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:21:32.366Z,1408594892.366 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802433, -121.787209) is outside the bounding box
2014-08-21T04:21:32.383Z,1408594892.383 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802433, -121.787209) is outside the bounding box
2014-08-21T04:21:32.777Z,1408594892.777 [DataOverHttps](INFO): Sending 151 bytes from file Logs/20140821T041253/Courier0004.lzma
2014-08-21T04:21:32.781Z,1408594892.781 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:21:32.797Z,1408594892.797 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802433, -121.787209) is outside the bounding box
2014-08-21T04:21:32.799Z,1408594892.799 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802433, -121.787209) is outside the bounding box
2014-08-21T04:21:33.214Z,1408594893.214 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:21:33.238Z,1408594893.238 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802433, -121.787209) is outside the bounding box
2014-08-21T04:21:33.240Z,1408594893.240 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802433, -121.787209) is outside the bounding box
2014-08-21T04:21:33.656Z,1408594893.656 [DataOverHttps](INFO): Moved sent file to Logs/20140821T041253/Courier0004.lzma.bak
2014-08-21T04:21:33.656Z,1408594893.656 [DataOverHttps](INFO): SBD MOMSN=1090168
2014-08-21T04:21:33.667Z,1408594893.667 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:21:33.706Z,1408594893.706 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802433, -121.787209) is outside the bounding box
2014-08-21T04:21:33.708Z,1408594893.708 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802433, -121.787209) is outside the bounding box
2014-08-21T04:21:34.420Z,1408594894.420 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:21:34.451Z,1408594894.451 [DAT](INFO): read user prompt: user:1>
2014-08-21T04:21:34.452Z,1408594894.452 [DAT](INFO): setting local address to 2
2014-08-21T04:21:34.454Z,1408594894.454 [DAT](INFO): bytes available on uart_: 0
2014-08-21T04:21:34.455Z,1408594894.455 [DAT](INFO): uart CANNOT read until LocalAddr 0
2014-08-21T04:21:34.457Z,1408594894.457 [DAT](INFO): uart CANNOT read until LocalAddr 0
2014-08-21T04:21:34.458Z,1408594894.458 [DAT](INFO): uart CANNOT read until LocalAddr 0
2014-08-21T04:21:34.464Z,1408594894.464 [DAT](INFO): uart CANNOT read until LocalAddr 0
2014-08-21T04:21:34.465Z,1408594894.465 [DAT](INFO): uart CANNOT read until LocalAddr 0
2014-08-21T04:21:34.465Z,1408594894.465 [DAT](ERROR): failed to set local address; deviceResponse_: user:1>
2014-08-21T04:21:34.465Z,1408594894.465 [DAT] Communications Fault, FailCount= 2
2014-08-21T04:21:34.465Z,1408594894.465 [DAT](ERROR): Communications Fault
2014-08-21T04:21:34.473Z,1408594894.473 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802433, -121.787209) is outside the bounding box
2014-08-21T04:21:34.475Z,1408594894.475 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802433, -121.787209) is outside the bounding box
2014-08-21T04:21:34.563Z,1408594894.563 [CBIT](ERROR): Communications Fault in component: DAT
2014-08-21T04:21:34.989Z,1408594894.989 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:21:34.994Z,1408594894.994 [DAT](INFO): Powering down
2014-08-21T04:21:35.130Z,1408594895.130 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802433, -121.787209) is outside the bounding box
2014-08-21T04:21:35.132Z,1408594895.132 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802433, -121.787209) is outside the bounding box
2014-08-21T04:21:36.057Z,1408594896.057 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:21:36.071Z,1408594896.071 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802433, -121.787209) is outside the bounding box
2014-08-21T04:21:36.090Z,1408594896.090 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802433, -121.787209) is outside the bounding box
2014-08-21T04:21:36.499Z,1408594896.499 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:21:36.512Z,1408594896.512 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802433, -121.787209) is outside the bounding box
2014-08-21T04:21:36.514Z,1408594896.514 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802433, -121.787209) is outside the bounding box
2014-08-21T04:21:36.564Z,1408594896.564 [CBIT](INFO): Clearing failed state for component DAT
2014-08-21T04:21:36.564Z,1408594896.564 [DAT] No Fault, FailCount= 2
2014-08-21T04:21:36.939Z,1408594896.939 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:21:36.952Z,1408594896.952 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802433, -121.787209) is outside the bounding box
2014-08-21T04:21:36.954Z,1408594896.954 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802433, -121.787209) is outside the bounding box
2014-08-21T04:21:37.366Z,1408594897.366 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:21:37.367Z,1408594897.367 [NAL9602](INFO): Powering down
2014-08-21T04:21:37.407Z,1408594897.407 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802433, -121.787209) is outside the bounding box
2014-08-21T04:21:37.409Z,1408594897.409 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802433, -121.787209) is outside the bounding box
2014-08-21T04:21:37.821Z,1408594897.821 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:21:37.887Z,1408594897.887 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802433, -121.787209) is outside the bounding box
2014-08-21T04:21:37.893Z,1408594897.893 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802433, -121.787209) is outside the bounding box
2014-08-21T04:21:38.306Z,1408594898.306 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:21:38.312Z,1408594898.312 [DAT](INFO): Powering up
2014-08-21T04:21:38.312Z,1408594898.312 [DAT](DEBUG): Initializing DAT.
2014-08-21T04:21:38.338Z,1408594898.338 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802433, -121.787209) is outside the bounding box
2014-08-21T04:21:38.371Z,1408594898.371 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802433, -121.787209) is outside the bounding box
2014-08-21T04:21:39.219Z,1408594899.219 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:21:39.232Z,1408594899.232 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802433, -121.787209) is outside the bounding box
2014-08-21T04:21:39.235Z,1408594899.235 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802433, -121.787209) is outside the bounding box
2014-08-21T04:21:39.649Z,1408594899.649 [DataOverHttps](INFO): Sending 435 bytes from file Logs/20140821T041253/Express0005.lzma
2014-08-21T04:21:39.676Z,1408594899.676 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:21:39.689Z,1408594899.689 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802433, -121.787209) is outside the bounding box
2014-08-21T04:21:39.691Z,1408594899.691 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802433, -121.787209) is outside the bounding box
2014-08-21T04:21:40.105Z,1408594900.105 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:21:40.118Z,1408594900.118 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802433, -121.787209) is outside the bounding box
2014-08-21T04:21:40.120Z,1408594900.120 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802433, -121.787209) is outside the bounding box
2014-08-21T04:21:40.529Z,1408594900.529 [DataOverHttps](INFO): Moved sent file to Logs/20140821T041253/Express0005.lzma.bak
2014-08-21T04:21:40.529Z,1408594900.529 [DataOverHttps](INFO): SBD MOMSN=1090172
2014-08-21T04:21:40.541Z,1408594900.541 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:21:40.587Z,1408594900.587 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802433, -121.787209) is outside the bounding box
2014-08-21T04:21:40.589Z,1408594900.589 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802433, -121.787209) is outside the bounding box
2014-08-21T04:21:41.260Z,1408594901.260 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:21:41.295Z,1408594901.295 [HFRadarCompactModelForecaster](DEBUG): Did not find new historical expansion coefficients.
2014-08-21T04:21:41.298Z,1408594901.298 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802433, -121.787209) is outside the bounding box
2014-08-21T04:21:41.300Z,1408594901.300 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802433, -121.787209) is outside the bounding box
2014-08-21T04:21:41.354Z,1408594901.354 [Default:CheckIn:Read_Iridium] Stopped
2014-08-21T04:21:41.355Z,1408594901.355 [Default:CheckIn](INFO): Completed Default:CheckIn
2014-08-21T04:21:41.355Z,1408594901.355 [Default:CheckIn] Stopped
2014-08-21T04:21:41.355Z,1408594901.355 [Default:CheckIn](INFO): Aggregate::uninitialize Default:CheckIn
2014-08-21T04:21:41.355Z,1408594901.355 [Default:CheckIn:A.SetSpeed] Stopped
2014-08-21T04:21:41.355Z,1408594901.355 [Default:CheckIn:A.SetSpeed](DEBUG): Uninitialize.
2014-08-21T04:21:41.719Z,1408594901.719 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:21:41.734Z,1408594901.734 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802433, -121.787209) is outside the bounding box
2014-08-21T04:21:41.735Z,1408594901.735 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802433, -121.787209) is outside the bounding box
2014-08-21T04:21:47.412Z,1408594907.412 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:21:47.479Z,1408594907.479 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802433, -121.787209) is outside the bounding box
2014-08-21T04:21:47.481Z,1408594907.481 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802433, -121.787209) is outside the bounding box
2014-08-21T04:21:51.788Z,1408594911.788 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:21:51.817Z,1408594911.817 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802433, -121.787209) is outside the bounding box
2014-08-21T04:21:51.819Z,1408594911.819 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802433, -121.787209) is outside the bounding box
2014-08-21T04:21:56.782Z,1408594916.782 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:21:56.836Z,1408594916.836 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802433, -121.787209) is outside the bounding box
2014-08-21T04:21:56.838Z,1408594916.838 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802433, -121.787209) is outside the bounding box
2014-08-21T04:22:01.785Z,1408594921.784 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:22:01.791Z,1408594921.791 [DAT](FAULT): failed to initialize; deviceResponse_:
2014-08-21T04:22:01.791Z,1408594921.791 [DAT] Communications Fault, FailCount= 3
2014-08-21T04:22:01.791Z,1408594921.791 [DAT](ERROR): Communications Fault
2014-08-21T04:22:01.799Z,1408594921.799 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802433, -121.787209) is outside the bounding box
2014-08-21T04:22:01.801Z,1408594921.801 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802433, -121.787209) is outside the bounding box
2014-08-21T04:22:01.873Z,1408594921.873 [CBIT](ERROR): Communications Fault in component: DAT
2014-08-21T04:22:06.782Z,1408594926.782 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:22:06.806Z,1408594926.806 [DAT](INFO): Powering down
2014-08-21T04:22:06.939Z,1408594926.939 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802433, -121.787209) is outside the bounding box
2014-08-21T04:22:06.941Z,1408594926.941 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802433, -121.787209) is outside the bounding box
2014-08-21T04:22:11.781Z,1408594931.781 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:22:11.795Z,1408594931.795 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802433, -121.787209) is outside the bounding box
2014-08-21T04:22:11.798Z,1408594931.798 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802433, -121.787209) is outside the bounding box
2014-08-21T04:22:16.781Z,1408594936.781 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:22:16.815Z,1408594936.815 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802433, -121.787209) is outside the bounding box
2014-08-21T04:22:16.817Z,1408594936.817 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802433, -121.787209) is outside the bounding box
2014-08-21T04:22:16.887Z,1408594936.887 [CBIT](INFO): Clearing failed state for component DAT
2014-08-21T04:22:16.887Z,1408594936.887 [DAT] No Fault, FailCount= 3
2014-08-21T04:22:21.789Z,1408594941.789 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:22:21.795Z,1408594941.795 [DAT](INFO): Powering up
2014-08-21T04:22:21.795Z,1408594941.795 [DAT](DEBUG): Initializing DAT.
2014-08-21T04:22:21.822Z,1408594941.822 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802433, -121.787209) is outside the bounding box
2014-08-21T04:22:21.853Z,1408594941.853 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802433, -121.787209) is outside the bounding box
2014-08-21T04:22:26.785Z,1408594946.785 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:22:26.817Z,1408594946.817 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802433, -121.787209) is outside the bounding box
2014-08-21T04:22:26.819Z,1408594946.819 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802433, -121.787209) is outside the bounding box
2014-08-21T04:22:31.775Z,1408594951.775 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:22:31.804Z,1408594951.804 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802433, -121.787209) is outside the bounding box
2014-08-21T04:22:31.806Z,1408594951.806 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802433, -121.787209) is outside the bounding box
2014-08-21T04:22:36.780Z,1408594956.780 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:22:36.826Z,1408594956.826 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802433, -121.787209) is outside the bounding box
2014-08-21T04:22:36.828Z,1408594956.828 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802433, -121.787209) is outside the bounding box
2014-08-21T04:22:41.793Z,1408594961.793 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:22:41.800Z,1408594961.800 [DAT](FAULT): failed to initialize; deviceResponse_:CONNECT 00800 bits/sec
nsponder version 8.3.1

2014-08-21T04:22:41.800Z,1408594961.800 [DAT] Communications Fault, FailCount= 4
2014-08-21T04:22:41.800Z,1408594961.800 [DAT](ERROR): Communications Fault
2014-08-21T04:22:41.807Z,1408594961.807 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802433, -121.787209) is outside the bounding box
2014-08-21T04:22:41.809Z,1408594961.809 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802433, -121.787209) is outside the bounding box
2014-08-21T04:22:41.836Z,1408594961.836 [CBIT](ERROR): Communications Fault in component: DAT
2014-08-21T04:22:46.788Z,1408594966.788 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:22:46.831Z,1408594966.831 [DAT](INFO): Powering down
2014-08-21T04:22:46.965Z,1408594966.965 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802433, -121.787209) is outside the bounding box
2014-08-21T04:22:46.967Z,1408594966.967 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802433, -121.787209) is outside the bounding box
2014-08-21T04:22:52.317Z,1408594972.317 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:22:52.331Z,1408594972.331 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802433, -121.787209) is outside the bounding box
2014-08-21T04:22:52.333Z,1408594972.333 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802433, -121.787209) is outside the bounding box
2014-08-21T04:22:56.791Z,1408594976.791 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:22:56.841Z,1408594976.841 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802433, -121.787209) is outside the bounding box
2014-08-21T04:22:56.843Z,1408594976.843 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802433, -121.787209) is outside the bounding box
2014-08-21T04:22:56.898Z,1408594976.898 [CBIT](INFO): Clearing failed state for component DAT
2014-08-21T04:22:56.898Z,1408594976.898 [DAT] No Fault, FailCount= 4
2014-08-21T04:23:01.787Z,1408594981.787 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:23:01.793Z,1408594981.793 [DAT](INFO): Powering up
2014-08-21T04:23:01.793Z,1408594981.793 [DAT](DEBUG): Initializing DAT.
2014-08-21T04:23:01.843Z,1408594981.843 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802433, -121.787209) is outside the bounding box
2014-08-21T04:23:01.845Z,1408594981.845 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802433, -121.787209) is outside the bounding box
2014-08-21T04:23:06.791Z,1408594986.791 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:23:06.841Z,1408594986.841 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802433, -121.787209) is outside the bounding box
2014-08-21T04:23:06.843Z,1408594986.843 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802433, -121.787209) is outside the bounding box
2014-08-21T04:23:11.789Z,1408594991.789 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:23:11.803Z,1408594991.803 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802433, -121.787209) is outside the bounding box
2014-08-21T04:23:11.805Z,1408594991.805 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802433, -121.787209) is outside the bounding box
2014-08-21T04:23:16.782Z,1408594996.782 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:23:16.850Z,1408594996.850 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802433, -121.787209) is outside the bounding box
2014-08-21T04:23:16.852Z,1408594996.852 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802433, -121.787209) is outside the bounding box
2014-08-21T04:23:21.777Z,1408595001.777 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:23:21.794Z,1408595001.794 [DAT](FAULT): failed to initialize; deviceResponse_:CONNECT 00800 bits/sec
nsponder version 8.3.1

2014-08-21T04:23:21.794Z,1408595001.794 [DAT] Communications Fault, FailCount= 5
2014-08-21T04:23:21.795Z,1408595001.795 [DAT](ERROR): Communications Fault
2014-08-21T04:23:21.802Z,1408595001.802 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802433, -121.787209) is outside the bounding box
2014-08-21T04:23:21.804Z,1408595001.804 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802433, -121.787209) is outside the bounding box
2014-08-21T04:23:21.872Z,1408595001.872 [CBIT](ERROR): Communications Fault in component: DAT
2014-08-21T04:23:26.786Z,1408595006.786 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:23:26.812Z,1408595006.812 [DAT](INFO): Powering down
2014-08-21T04:23:26.943Z,1408595006.943 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802433, -121.787209) is outside the bounding box
2014-08-21T04:23:26.945Z,1408595006.945 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802433, -121.787209) is outside the bounding box
2014-08-21T04:23:26.959Z,1408595006.959 [Default:UpdateAndReportMinutesSinceMissionStarted] Running Loop=1
2014-08-21T04:23:26.959Z,1408595006.959 [Default:UpdateAndReportMinutesSinceMissionStarted](INFO): Aggregate::initialize Default:UpdateAndReportMinutesSinceMissionStarted
2014-08-21T04:23:26.959Z,1408595006.959 [Default:UpdateAndReportMinutesSinceMissionStarted:A] Running Loop=1
2014-08-21T04:23:26.960Z,1408595006.960 [Default:UpdateAndReportMinutesSinceMissionStarted:A] Stopped
2014-08-21T04:23:26.960Z,1408595006.960 [Default:UpdateAndReportMinutesSinceMissionStarted:B] Running Loop=1
2014-08-21T04:23:31.805Z,1408595011.805 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:23:31.819Z,1408595011.819 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802433, -121.787209) is outside the bounding box
2014-08-21T04:23:31.821Z,1408595011.821 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802433, -121.787209) is outside the bounding box
2014-08-21T04:23:31.839Z,1408595011.839 [Default:UpdateAndReportMinutesSinceMissionStarted:B](IMPORTANT): Default mission has been running for 7.746674 min 
2014-08-21T04:23:31.839Z,1408595011.839 [Default:UpdateAndReportMinutesSinceMissionStarted:B] Stopped
2014-08-21T04:23:31.839Z,1408595011.839 [Default:UpdateAndReportMinutesSinceMissionStarted](INFO): Completed Default:UpdateAndReportMinutesSinceMissionStarted
2014-08-21T04:23:31.839Z,1408595011.839 [Default:UpdateAndReportMinutesSinceMissionStarted] Stopped
2014-08-21T04:23:31.839Z,1408595011.839 [Default:UpdateAndReportMinutesSinceMissionStarted](INFO): Aggregate::uninitialize Default:UpdateAndReportMinutesSinceMissionStarted
2014-08-21T04:23:36.777Z,1408595016.777 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:23:36.827Z,1408595016.827 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802433, -121.787209) is outside the bounding box
2014-08-21T04:23:36.829Z,1408595016.829 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802433, -121.787209) is outside the bounding box
2014-08-21T04:23:36.868Z,1408595016.868 [CBIT](INFO): Clearing failed state for component DAT
2014-08-21T04:23:36.868Z,1408595016.868 [DAT] No Fault, FailCount= 5
2014-08-21T04:23:41.793Z,1408595021.793 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:23:41.799Z,1408595021.799 [DAT](INFO): Powering up
2014-08-21T04:23:41.799Z,1408595021.799 [DAT](DEBUG): Initializing DAT.
2014-08-21T04:23:41.854Z,1408595021.854 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802433, -121.787209) is outside the bounding box
2014-08-21T04:23:41.860Z,1408595021.860 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802433, -121.787209) is outside the bounding box
2014-08-21T04:23:46.789Z,1408595026.789 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:23:46.822Z,1408595026.822 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802433, -121.787209) is outside the bounding box
2014-08-21T04:23:46.824Z,1408595026.824 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802433, -121.787209) is outside the bounding box
2014-08-21T04:23:52.240Z,1408595032.240 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:23:52.253Z,1408595032.253 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802433, -121.787209) is outside the bounding box
2014-08-21T04:23:52.255Z,1408595032.255 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802433, -121.787209) is outside the bounding box
2014-08-21T04:23:56.781Z,1408595036.781 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:23:56.781Z,1408595036.781 [DVL_micro](FAULT): DVL failed to acquire valid data within timeout.
2014-08-21T04:23:56.781Z,1408595036.781 [DVL_micro] Data Fault, FailCount= 1
2014-08-21T04:23:56.781Z,1408595036.781 [DVL_micro](ERROR): Data Fault
2014-08-21T04:23:56.835Z,1408595036.835 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802433, -121.787209) is outside the bounding box
2014-08-21T04:23:56.837Z,1408595036.837 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802433, -121.787209) is outside the bounding box
2014-08-21T04:23:56.873Z,1408595036.873 [CBIT](ERROR): Data Fault in component: DVL_micro
2014-08-21T04:24:01.871Z,1408595041.871 [DVL_micro](INFO): uninitialize:Powering down
2014-08-21T04:24:01.878Z,1408595041.878 [DAT](FAULT): failed to initialize; deviceResponse_:CONNECT 00800 bits/sec
nsponder version 8.3.1

2014-08-21T04:24:01.878Z,1408595041.878 [DAT] Communications Fault, FailCount= 6
2014-08-21T04:24:01.878Z,1408595041.878 [DAT](ERROR): Communications Fault
2014-08-21T04:24:01.885Z,1408595041.885 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802433, -121.787209) is outside the bounding box
2014-08-21T04:24:01.917Z,1408595041.917 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802433, -121.787209) is outside the bounding box
2014-08-21T04:24:01.993Z,1408595041.993 [CBIT](ERROR): Communications Fault in component: DAT
2014-08-21T04:24:06.792Z,1408595046.792 [DVL_micro](FAULT): LCB fault:  Software Overcurrent.
2014-08-21T04:24:06.792Z,1408595046.792 [DVL_micro] Hardware Fault, FailCount= 1
2014-08-21T04:24:06.792Z,1408595046.792 [DVL_micro](ERROR): Hardware Fault
2014-08-21T04:24:06.834Z,1408595046.834 [DAT](INFO): Powering down
2014-08-21T04:24:06.969Z,1408595046.969 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802433, -121.787209) is outside the bounding box
2014-08-21T04:24:06.971Z,1408595046.971 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802433, -121.787209) is outside the bounding box
2014-08-21T04:24:11.790Z,1408595051.790 [DVL_micro](INFO): Initializing
2014-08-21T04:24:11.860Z,1408595051.860 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802433, -121.787209) is outside the bounding box
2014-08-21T04:24:11.867Z,1408595051.867 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802433, -121.787209) is outside the bounding box
2014-08-21T04:24:11.924Z,1408595051.924 [CBIT](INFO): Clearing failed state for component DVL_micro
2014-08-21T04:24:11.924Z,1408595051.924 [DVL_micro] No Fault, FailCount= 1
2014-08-21T04:24:16.808Z,1408595056.808 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802433, -121.787209) is outside the bounding box
2014-08-21T04:24:16.810Z,1408595056.810 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802433, -121.787209) is outside the bounding box
2014-08-21T04:24:16.870Z,1408595056.870 [CBIT](INFO): Clearing failed state for component DAT
2014-08-21T04:24:16.870Z,1408595056.870 [DAT] No Fault, FailCount= 6
2014-08-21T04:24:21.805Z,1408595061.805 [DAT](INFO): Powering up
2014-08-21T04:24:21.805Z,1408595061.805 [DAT](DEBUG): Initializing DAT.
2014-08-21T04:24:21.891Z,1408595061.891 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802433, -121.787209) is outside the bounding box
2014-08-21T04:24:21.893Z,1408595061.893 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802433, -121.787209) is outside the bounding box
2014-08-21T04:24:26.800Z,1408595066.800 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802433, -121.787209) is outside the bounding box
2014-08-21T04:24:26.802Z,1408595066.802 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802433, -121.787209) is outside the bounding box
2014-08-21T04:24:31.919Z,1408595071.919 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:24:32.029Z,1408595072.029 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802433, -121.787209) is outside the bounding box
2014-08-21T04:24:32.043Z,1408595072.043 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802433, -121.787209) is outside the bounding box
2014-08-21T04:24:36.867Z,1408595076.867 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:24:36.945Z,1408595076.945 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802433, -121.787209) is outside the bounding box
2014-08-21T04:24:36.947Z,1408595076.947 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802433, -121.787209) is outside the bounding box
2014-08-21T04:24:41.831Z,1408595081.831 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T04:24:41.836Z,1408595081.836 [DVL_micro](ERROR): DVL Failure: Failed to read in all data items. Got 45 of 46
2014-08-21T04:24:41.837Z,1408595081.837 [DVL_micro](ERROR): Failed to parse DVL response:$#NQ.RES 0X0000 0 0 0 0 0 0 0 0 0 0 0 0 62 -60 -150 -185 2 3 3 2 282.9 166.8 -89.8 2 167.6 282.4 -89.8 2 282 166 -89 2 189 2 3.58 -0.69 28.8 -3.0 21.1 0.005 35.0 1489 119
2014-08-21T04:24:41.844Z,1408595081.844 [DAT](FAULT): failed to initialize; deviceResponse_:CONNECT 00800 bits/sec
nsponder version 8.3.1

2014-08-21T04:24:41.844Z,1408595081.844 [DAT] Communications Fault, FailCount= 7
2014-08-21T04:24:41.844Z,1408595081.844 [DAT](ERROR): Communications Fault
2014-08-21T04:24:41.940Z,1408595081.940 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802433, -121.787209) is outside the bounding box
2014-08-21T04:24:41.943Z,1408595081.943 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802433, -121.787209) is outside the bounding box
2014-08-21T04:24:42.016Z,1408595082.016 [CBIT](ERROR): Communications Fault in component: DAT
2014-08-21T04:24:42.911Z,1408595082.911 [CommandLine](IMPORTANT): got command restart application
2014-08-21T04:24:43.919Z,1408595083.919 [CommandLine ThreadHandler](INFO): Uninitializing protected caller thread.
2014-08-21T04:24:43.919Z,1408595083.919 [CommandLine ThreadHandler](INFO): Thread cancelled.
2014-08-21T04:24:44.076Z,1408595084.076 [Supervisor](DEBUG): Uninitializing supervisor and starting cleanup.  Bye!
2014-08-21T04:24:44.076Z,1408595084.076 [CommandLine ThreadHandler](INFO): Thread cancelled.
2014-08-21T04:24:44.077Z,1408595084.077 [CommandLine](INFO): Join timeout helper Thread ID is 1310
2014-08-21T04:24:44.077Z,1408595084.077 [ComponentRegistry](INFO): Shutting down NavChartDb ThreadHandler
2014-08-21T04:24:44.077Z,1408595084.077 [NavChartDb ThreadHandler](INFO): Thread cancelled.
2014-08-21T04:24:44.078Z,1408595084.078 [NavChartDb](INFO): Join timeout helper Thread ID is 1311
2014-08-21T04:24:44.228Z,1408595084.228 [NavChartDb ThreadHandler](INFO): Uninitializing protected caller thread.
2014-08-21T04:24:44.229Z,1408595084.229 [NavChartDb ThreadHandler](INFO): Thread cancelled.
2014-08-21T04:24:44.236Z,1408595084.236 [ComponentRegistry](INFO): Shutting down Radio_Freewave ThreadHandler
2014-08-21T04:24:44.236Z,1408595084.236 [Radio_Freewave ThreadHandler](INFO): Thread cancelled.
2014-08-21T04:24:44.237Z,1408595084.237 [Radio_Freewave](INFO): Join timeout helper Thread ID is 1312
2014-08-21T04:24:44.373Z,1408595084.373 [Radio_Freewave ThreadHandler](INFO): Uninitializing protected caller thread.
2014-08-21T04:24:44.481Z,1408595084.481 [Radio_Freewave](INFO): Powering down
2014-08-21T04:24:44.886Z,1408595084.886 [Radio_Freewave ThreadHandler](INFO): Thread cancelled.
2014-08-21T04:24:44.906Z,1408595084.906 [ComponentRegistry](INFO): Shutting down WetLabsBB2FL ThreadHandler
2014-08-21T04:24:44.906Z,1408595084.906 [WetLabsBB2FL ThreadHandler](INFO): Thread cancelled.
2014-08-21T04:24:44.906Z,1408595084.906 [WetLabsBB2FL](INFO): Join timeout helper Thread ID is 1314
2014-08-21T04:24:45.066Z,1408595085.066 [WetLabsBB2FL ThreadHandler](INFO): Uninitializing protected caller thread.
2014-08-21T04:24:45.066Z,1408595085.066 [WetLabsBB2FL](INFO): Powering down
2014-08-21T04:24:45.067Z,1408595085.067 [WetLabsBB2FL ThreadHandler](INFO): Thread cancelled.
2014-08-21T04:24:45.086Z,1408595085.086 [ComponentRegistry](INFO): Shutting down CTD_NeilBrown ThreadHandler
2014-08-21T04:24:45.086Z,1408595085.086 [CTD_NeilBrown ThreadHandler](INFO): Thread cancelled.
2014-08-21T04:24:45.086Z,1408595085.086 [CTD_NeilBrown](INFO): Join timeout helper Thread ID is 1315
2014-08-21T04:24:45.451Z,1408595085.451 [CTD_NeilBrown ThreadHandler](INFO): Uninitializing protected caller thread.
2014-08-21T04:24:45.451Z,1408595085.451 [CTD_NeilBrown](INFO): Powering down
2014-08-21T04:24:45.452Z,1408595085.452 [CTD_NeilBrown ThreadHandler](INFO): Thread cancelled.
2014-08-21T04:24:45.467Z,1408595085.467 [ComponentRegistry](INFO): Shutting down logger ThreadHandler
2014-08-21T04:24:45.467Z,1408595085.467 [logger ThreadHandler](INFO): Thread cancelled.
2014-08-21T04:24:45.468Z,1408595085.468 [logger](INFO): Join timeout helper Thread ID is 1316
2014-08-21T04:24:45.494Z,1408595085.494 [logger ThreadHandler](INFO): Uninitializing protected caller thread.
2014-08-21T04:24:45.495Z,1408595085.495 [logger ThreadHandler](INFO): Thread cancelled.
2014-08-21T04:24:45.507Z,1408595085.507 [ComponentRegistry](INFO): Shutting down CommandLine ThreadHandler
2014-08-21T04:24:45.507Z,1408595085.507 [CommandLine ThreadHandler](INFO): Thread cancelled.
2014-08-21T04:24:45.508Z,1408595085.508 [ComponentRegistry](INFO): Shutting down controlThread ThreadHandler
2014-08-21T04:24:45.508Z,1408595085.508 [controlThread ThreadHandler](INFO): Thread cancelled.
2014-08-21T04:24:45.508Z,1408595085.508 [controlThread](INFO): Join timeout helper Thread ID is 1317
2014-08-21T04:24:46.368Z,1408595086.368 [controlThread ThreadHandler](INFO): Uninitializing protected caller thread.
2014-08-21T04:24:46.368Z,1408595086.368 [controlThread](DEBUG): Uninitializing ControlThread
2014-08-21T04:24:46.369Z,1408595086.369 [AHRS_sp3003D](INFO): Powering down
2014-08-21T04:24:46.528Z,1408595086.528 [DVL_micro](INFO): uninitialize:Powering down
2014-08-21T04:24:46.530Z,1408595086.530 [NAL9602](INFO): Powering down
2014-08-21T04:24:46.531Z,1408595086.531 [DAT](INFO): Powering down
2014-08-21T04:24:46.649Z,1408595086.649 [DepthRateCalculator](DEBUG): Initializing DepthRateCalculator.
2014-08-21T04:24:46.652Z,1408595086.652 [NavChart](DEBUG): Uninitialize NavChart Navigation.
2014-08-21T04:24:46.652Z,1408595086.652 [Default] Stopped
2014-08-21T04:24:46.653Z,1408595086.653 [Default](INFO): Aggregate::uninitialize Default
2014-08-21T04:24:46.653Z,1408595086.653 [Default:B.GoToSurface] Stopped
2014-08-21T04:24:46.653Z,1408595086.653 [Default:B.GoToSurface](DEBUG): Uninitialize GoToSurfaceComponent.
2014-08-21T04:24:46.653Z,1408595086.653 [Default:WaitAtTheSurface] Stopped
2014-08-21T04:24:46.653Z,1408595086.653 [Default:WaitAtTheSurface](INFO): Aggregate::uninitialize Default:WaitAtTheSurface
2014-08-21T04:24:46.653Z,1408595086.653 [Default:WaitAtTheSurface:RunApplicationAtLowSpeed.SetSpeed] Stopped
2014-08-21T04:24:46.654Z,1408595086.654 [Default:WaitAtTheSurface:RunApplicationAtLowSpeed.SetSpeed](DEBUG): Uninitialize.
2014-08-21T04:24:46.660Z,1408595086.660 [VerticalControl](DEBUG): Uninitialize VerticalControlComponent.
2014-08-21T04:24:46.660Z,1408595086.660 [HorizontalControl](DEBUG): Uninitialize HorizontalControlComponent.
2014-08-21T04:24:46.661Z,1408595086.661 [SpeedControl](DEBUG): Uninitialize SpeedControlComponent.
2014-08-21T04:24:46.661Z,1408595086.661 [LoopControl](DEBUG): Uninitialize LoopControlComponent.
2014-08-21T04:24:46.661Z,1408595086.661 [BuoyancyServo](DEBUG): Uninitialize Buoyancy Servo.
2014-08-21T04:24:46.661Z,1408595086.661 [BuoyancyServo](INFO): Powering down
2014-08-21T04:24:46.676Z,1408595086.676 [ElevatorServo](DEBUG): Uninitialize Elevator Servo.
2014-08-21T04:24:46.676Z,1408595086.676 [ElevatorServo](INFO): Powering down
2014-08-21T04:24:46.677Z,1408595086.677 [MassServo](DEBUG): Uninitialize Mass Servo.
2014-08-21T04:24:46.678Z,1408595086.678 [MassServo](INFO): Powering down
2014-08-21T04:24:46.678Z,1408595086.678 [RudderServo](DEBUG): Uninitialize Rudder Servo.
2014-08-21T04:24:46.679Z,1408595086.679 [RudderServo](INFO): Powering down
2014-08-21T04:24:46.680Z,1408595086.680 [ThrusterServo](DEBUG): Uninitialize Thruster Servo.
2014-08-21T04:24:46.680Z,1408595086.680 [ThrusterServo](INFO): Powering down
2014-08-21T04:24:46.681Z,1408595086.681 [SBIT](DEBUG): Uninitialize SBIT Component.
2014-08-21T04:24:46.681Z,1408595086.681 [IBIT](DEBUG): Uninitialize IBIT Component.
2014-08-21T04:24:46.681Z,1408595086.681 [CBIT](DEBUG): Uninitialize CBIT Component.
2014-08-21T04:24:46.732Z,1408595086.732 [controlThread ThreadHandler](INFO): Thread cancelled.
2014-08-21T04:24:46.816Z,1408595086.816 [WetLabsBB2FL ThreadHandler](INFO): Thread cancelled.
2014-08-21T04:24:46.820Z,1408595086.820 [CTD_NeilBrown ThreadHandler](INFO): Thread cancelled.
2014-08-21T04:24:46.829Z,1408595086.829 [Radio_Freewave ThreadHandler](INFO): Thread cancelled.
2014-08-21T04:24:46.891Z,1408595086.891 [NavChartDb ThreadHandler](INFO): Thread cancelled.
2014-08-21T04:24:46.947Z,1408595086.947 [logger ThreadHandler](INFO): Thread cancelled.