2014-08-21T02:40:50.155Z,1408588850.155 [Supervisor](DEBUG): Initializing supervisor.
2014-08-21T02:40:50.158Z,1408588850.158 [SyncHandler](DEBUG): Created PCaller Thread at 4034C4E0
2014-08-21T02:40:50.159Z,1408588850.159 [SyncHandler](INFO): Protected caller Thread ID is 4648
2014-08-21T02:40:50.159Z,1408588850.159 [ComponentRegistry](DEBUG): Component "controlThread" handled in its own thread.
2014-08-21T02:40:50.160Z,1408588850.160 [controlThread ThreadHandler](DEBUG): Created PCaller Thread at 4037C4E0
2014-08-21T02:40:50.161Z,1408588850.161 [controlThread ThreadHandler](INFO): Protected caller Thread ID is 4649
2014-08-21T02:40:50.164Z,1408588850.164 [ComponentRegistry](DEBUG): SyncComponent "CycleStarter" handled in the control thread.
2014-08-21T02:40:50.177Z,1408588850.177 [ComponentRegistry](DEBUG): Component "CommandLine" handled in its own thread.
2014-08-21T02:40:50.178Z,1408588850.178 [CommandLine ThreadHandler](DEBUG): Created PCaller Thread at 403AC4E0
2014-08-21T02:40:50.178Z,1408588850.178 [CommandLine ThreadHandler](INFO): Protected caller Thread ID is 4650
2014-08-21T02:40:50.179Z,1408588850.179 [ComponentRegistry](DEBUG): Component "logger" handled in its own thread.
2014-08-21T02:40:50.180Z,1408588850.180 [logger ThreadHandler](DEBUG): Created PCaller Thread at 403DC4E0
2014-08-21T02:40:50.181Z,1408588850.181 [logger ThreadHandler](INFO): Protected caller Thread ID is 4651
2014-08-21T02:40:50.183Z,1408588850.183 [ComponentRegistry](DEBUG): SyncComponent "LogSplitter" handled in the control thread.
2014-08-21T02:40:50.183Z,1408588850.183 [Supervisor](INFO): Looking for Config files in directory: Config/
2014-08-21T02:40:50.185Z,1408588850.185 [Supervisor](INFO): Opening Config file at: Config/Control.cfg
2014-08-21T02:40:50.511Z,1408588850.511 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Control
2014-08-21T02:40:50.512Z,1408588850.512 [Supervisor](INFO): Opening Config file at: Config/BIT.cfg
2014-08-21T02:40:50.668Z,1408588850.668 [ComponentRegistry](DEBUG): Loaded Config Component "Config/BIT
2014-08-21T02:40:50.668Z,1408588850.668 [Supervisor](INFO): Opening Config file at: Config/Derivation.cfg
2014-08-21T02:40:50.778Z,1408588850.778 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Derivation
2014-08-21T02:40:50.778Z,1408588850.778 [Supervisor](INFO): Opening Config file at: Config/Estimation.cfg
2014-08-21T02:40:50.902Z,1408588850.902 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Estimation
2014-08-21T02:40:50.903Z,1408588850.903 [Supervisor](INFO): Opening Config file at: Config/Guidance.cfg
2014-08-21T02:40:50.990Z,1408588850.990 [Supervisor](INFO): Opening Config file at: Config/Navigation.cfg
2014-08-21T02:40:51.134Z,1408588851.134 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Navigation
2014-08-21T02:40:51.135Z,1408588851.135 [Supervisor](INFO): Opening Config file at: Config/Sample.cfg
2014-08-21T02:40:51.222Z,1408588851.222 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Sample
2014-08-21T02:40:51.223Z,1408588851.223 [Supervisor](INFO): Opening Config file at: Config/Science.cfg
2014-08-21T02:40:51.403Z,1408588851.403 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Science
2014-08-21T02:40:51.404Z,1408588851.404 [Supervisor](INFO): Opening Config file at: Config/Sensor.cfg
2014-08-21T02:40:51.699Z,1408588851.699 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Sensor
2014-08-21T02:40:51.700Z,1408588851.700 [Supervisor](INFO): Opening Config file at: Config/Servo.cfg
2014-08-21T02:40:51.998Z,1408588851.998 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Servo
2014-08-21T02:40:51.998Z,1408588851.998 [Supervisor](INFO): Opening Config file at: Config/Simulator.cfg
2014-08-21T02:40:52.486Z,1408588852.486 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Simulator
2014-08-21T02:40:52.486Z,1408588852.486 [Supervisor](INFO): Opening Config file at: Config/logger.cfg
2014-08-21T02:40:52.672Z,1408588852.672 [ComponentRegistry](DEBUG): Loaded Config Component "Config/logger
2014-08-21T02:40:52.672Z,1408588852.672 [Supervisor](INFO): Opening Config file at: Config/secure.cfg
2014-08-21T02:40:52.777Z,1408588852.777 [ComponentRegistry](DEBUG): Loaded Config Component "Config/secure
2014-08-21T02:40:52.777Z,1408588852.777 [Supervisor](INFO): Opening Config file at: Config/vehicle.cfg
2014-08-21T02:40:53.171Z,1408588853.171 [ComponentRegistry](DEBUG): Loaded Config Component "Config/vehicle
2014-08-21T02:40:53.172Z,1408588853.172 [Supervisor](INFO): Opening Config file at: Config/workSite.cfg
2014-08-21T02:40:53.284Z,1408588853.284 [ComponentRegistry](DEBUG): Loaded Config Component "Config/workSite
2014-08-21T02:40:53.286Z,1408588853.286 [Supervisor](INFO): Looking for Config files in directory: Config/lrauv-daphne/
2014-08-21T02:40:53.287Z,1408588853.287 [Supervisor](INFO): Opening Config file at: Config/lrauv-daphne/Control.cfg
2014-08-21T02:40:53.392Z,1408588853.392 [Supervisor](INFO): Opening Config file at: Config/lrauv-daphne/BIT.cfg
2014-08-21T02:40:53.510Z,1408588853.510 [Supervisor](INFO): Opening Config file at: Config/lrauv-daphne/logger.cfg
2014-08-21T02:40:53.609Z,1408588853.609 [Supervisor](INFO): Opening Config file at: Config/lrauv-daphne/Estimation.cfg
2014-08-21T02:40:53.719Z,1408588853.719 [Supervisor](INFO): Opening Config file at: Config/lrauv-daphne/Navigation.cfg
2014-08-21T02:40:53.817Z,1408588853.817 [Supervisor](INFO): Opening Config file at: Config/lrauv-daphne/Science.cfg
2014-08-21T02:40:53.945Z,1408588853.945 [Supervisor](INFO): Opening Config file at: Config/lrauv-daphne/Sensor.cfg
2014-08-21T02:40:54.093Z,1408588854.093 [Supervisor](INFO): Opening Config file at: Config/lrauv-daphne/Servo.cfg
2014-08-21T02:40:54.195Z,1408588854.195 [Supervisor](INFO): Opening Config file at: Config/lrauv-daphne/Simulator.cfg
2014-08-21T02:40:54.283Z,1408588854.283 [Supervisor](INFO): Opening Config file at: Config/lrauv-daphne/workSite.cfg
2014-08-21T02:40:54.370Z,1408588854.370 [Supervisor](INFO): Opening Config file at: Config/lrauv-daphne/secure.cfg
2014-08-21T02:40:54.523Z,1408588854.523 [Supervisor](INFO): Opening Config file at: Config/lrauv-daphne/vehicle.cfg
2014-08-21T02:40:54.635Z,1408588854.635 [Supervisor](INFO): Looking for Config files in directory: Config/lrauv-daphne/root/
2014-08-21T02:40:54.636Z,1408588854.636 [Supervisor](IMPORTANT): Reading configuration overrides from Data/persisted.cfg
2014-08-21T02:40:54.640Z,1408588854.640 [Module Loader](DEBUG): Loading Module at Modules/Control.so
2014-08-21T02:40:54.693Z,1408588854.693 [VerticalControl](DEBUG): Construct VerticalControl.
2014-08-21T02:40:54.838Z,1408588854.838 [VerticalControl] Loaded
2014-08-21T02:40:54.838Z,1408588854.838 [ComponentRegistry](DEBUG): SyncComponent "VerticalControl" handled in the control thread.
2014-08-21T02:40:54.839Z,1408588854.839 [HorizontalControl](DEBUG): Construct HorizontalControl.
2014-08-21T02:40:54.911Z,1408588854.911 [HorizontalControl] Loaded
2014-08-21T02:40:54.911Z,1408588854.911 [ComponentRegistry](DEBUG): SyncComponent "HorizontalControl" handled in the control thread.
2014-08-21T02:40:54.912Z,1408588854.912 [SpeedControl](DEBUG): Construct SpeedControl.
2014-08-21T02:40:54.918Z,1408588854.918 [SpeedControl] Loaded
2014-08-21T02:40:54.918Z,1408588854.918 [ComponentRegistry](DEBUG): SyncComponent "SpeedControl" handled in the control thread.
2014-08-21T02:40:54.919Z,1408588854.919 [LoopControl](DEBUG): Construct LoopControl.
2014-08-21T02:40:54.919Z,1408588854.919 [LoopControl] Loaded
2014-08-21T02:40:54.919Z,1408588854.919 [ComponentRegistry](DEBUG): SyncComponent "LoopControl" handled in the control thread.
2014-08-21T02:40:54.920Z,1408588854.920 [Module Loader](DEBUG): Loaded Module: Control (Contains the Control components, such as Depth, Heading, and Speed Control)
2014-08-21T02:40:54.920Z,1408588854.920 [Module Loader](DEBUG): Loading Module at Modules/BIT.so
2014-08-21T02:40:55.022Z,1408588855.022 [SBIT](DEBUG): Construct Startup Built In Test.
2014-08-21T02:40:55.034Z,1408588855.034 [SBIT] Loaded
2014-08-21T02:40:55.034Z,1408588855.034 [ComponentRegistry](DEBUG): SyncComponent "SBIT" handled in the control thread.
2014-08-21T02:40:55.035Z,1408588855.035 [IBIT](DEBUG): Construct Initiated Built In Test.
2014-08-21T02:40:55.064Z,1408588855.064 [IBIT] Loaded
2014-08-21T02:40:55.064Z,1408588855.064 [ComponentRegistry](DEBUG): SyncComponent "IBIT" handled in the control thread.
2014-08-21T02:40:55.067Z,1408588855.067 [CBIT](DEBUG): Construct CBIT Built In Test.
2014-08-21T02:40:55.185Z,1408588855.185 [CBIT] Loaded
2014-08-21T02:40:55.185Z,1408588855.185 [ComponentRegistry](DEBUG): SyncComponent "CBIT" handled in the control thread.
2014-08-21T02:40:55.186Z,1408588855.186 [Module Loader](DEBUG): Loaded Module: BIT (Contains the BuiltInTest components, such as C Built In Test)
2014-08-21T02:40:55.186Z,1408588855.186 [Module Loader](DEBUG): Loading Module at Modules/Derivation.so
2014-08-21T02:40:55.206Z,1408588855.206 [DepthRateCalculator] Loaded
2014-08-21T02:40:55.206Z,1408588855.206 [ComponentRegistry](DEBUG): SyncComponent "DepthRateCalculator" handled in the control thread.
2014-08-21T02:40:55.212Z,1408588855.212 [PitchRateCalculator] Loaded
2014-08-21T02:40:55.212Z,1408588855.212 [ComponentRegistry](DEBUG): SyncComponent "PitchRateCalculator" handled in the control thread.
2014-08-21T02:40:55.223Z,1408588855.223 [SpeedCalculator] Loaded
2014-08-21T02:40:55.223Z,1408588855.223 [ComponentRegistry](DEBUG): SyncComponent "SpeedCalculator" handled in the control thread.
2014-08-21T02:40:55.240Z,1408588855.240 [TempGradientCalculator] Loaded
2014-08-21T02:40:55.240Z,1408588855.240 [ComponentRegistry](DEBUG): SyncComponent "TempGradientCalculator" handled in the control thread.
2014-08-21T02:40:55.246Z,1408588855.246 [YawRateCalculator] Loaded
2014-08-21T02:40:55.246Z,1408588855.246 [ComponentRegistry](DEBUG): SyncComponent "YawRateCalculator" handled in the control thread.
2014-08-21T02:40:55.247Z,1408588855.247 [Module Loader](DEBUG): Loaded Module: Derivation (Contains the base derivation components)
2014-08-21T02:40:55.247Z,1408588855.247 [Module Loader](DEBUG): Loading Module at Modules/Estimation.so
2014-08-21T02:40:59.278Z,1408588859.278 [HFRadarCompactModelForecaster] Loaded
2014-08-21T02:40:59.278Z,1408588859.278 [ComponentRegistry](DEBUG): SyncComponent "HFRadarCompactModelForecaster" handled in the control thread.
2014-08-21T02:41:00.371Z,1408588860.371 [HFRCMSpaceInterpolator] Loaded
2014-08-21T02:41:00.372Z,1408588860.372 [ComponentRegistry](DEBUG): SyncComponent "HFRCMSpaceInterpolator" handled in the control thread.
2014-08-21T02:41:00.374Z,1408588860.374 [HFRCMTimeInterpolator] Loaded
2014-08-21T02:41:00.374Z,1408588860.374 [ComponentRegistry](DEBUG): SyncComponent "HFRCMTimeInterpolator" handled in the control thread.
2014-08-21T02:41:01.356Z,1408588861.356 [HFRCMReconstructedInterpolator] Loaded
2014-08-21T02:41:01.357Z,1408588861.357 [ComponentRegistry](DEBUG): SyncComponent "HFRCMReconstructedInterpolator" handled in the control thread.
2014-08-21T02:41:01.369Z,1408588861.369 [HFRCMSurfaceCurrentAtVehicleLocation] Loaded
2014-08-21T02:41:01.369Z,1408588861.369 [ComponentRegistry](DEBUG): SyncComponent "HFRCMSurfaceCurrentAtVehicleLocation" handled in the control thread.
2014-08-21T02:41:01.370Z,1408588861.370 [Module Loader](DEBUG): Loaded Module: Estimation (Contains the base estimation components)
2014-08-21T02:41:01.370Z,1408588861.370 [Module Loader](DEBUG): Loading Module at Modules/Guidance.so
2014-08-21T02:41:01.602Z,1408588861.602 [Module Loader](DEBUG): Loaded Module: Guidance (Contains behaviors and commands)
2014-08-21T02:41:01.603Z,1408588861.603 [Module Loader](DEBUG): Loading Module at Modules/Navigation.so
2014-08-21T02:41:01.684Z,1408588861.684 [DeadReckonUsingMultipleVelocitySourcesVector] Loaded
2014-08-21T02:41:01.684Z,1408588861.684 [ComponentRegistry](DEBUG): SyncComponent "DeadReckonUsingMultipleVelocitySourcesVector" handled in the control thread.
2014-08-21T02:41:01.740Z,1408588861.740 [DeadReckonUsingMultipleVelocitySources] Loaded
2014-08-21T02:41:01.740Z,1408588861.740 [ComponentRegistry](DEBUG): SyncComponent "DeadReckonUsingMultipleVelocitySources" handled in the control thread.
2014-08-21T02:41:01.786Z,1408588861.786 [DeadReckonWithRespectToWater] Loaded
2014-08-21T02:41:01.786Z,1408588861.786 [ComponentRegistry](DEBUG): SyncComponent "DeadReckonWithRespectToWater" handled in the control thread.
2014-08-21T02:41:01.832Z,1408588861.832 [DeadReckonWithRespectToSeafloor] Loaded
2014-08-21T02:41:01.832Z,1408588861.832 [ComponentRegistry](DEBUG): SyncComponent "DeadReckonWithRespectToSeafloor" handled in the control thread.
2014-08-21T02:41:01.892Z,1408588861.892 [DeadReckonUsingDVLWaterTrack] Loaded
2014-08-21T02:41:01.893Z,1408588861.893 [ComponentRegistry](DEBUG): SyncComponent "DeadReckonUsingDVLWaterTrack" handled in the control thread.
2014-08-21T02:41:01.940Z,1408588861.940 [DeadReckonUsingCompactModelForecast] Loaded
2014-08-21T02:41:01.940Z,1408588861.940 [ComponentRegistry](DEBUG): SyncComponent "DeadReckonUsingCompactModelForecast" handled in the control thread.
2014-08-21T02:41:01.957Z,1408588861.957 [NavChart] Loaded
2014-08-21T02:41:01.958Z,1408588861.958 [ComponentRegistry](DEBUG): SyncComponent "NavChart" handled in the control thread.
2014-08-21T02:41:01.962Z,1408588861.962 [UniversalFixResidualReporter] Loaded
2014-08-21T02:41:01.962Z,1408588861.962 [ComponentRegistry](DEBUG): SyncComponent "UniversalFixResidualReporter" handled in the control thread.
2014-08-21T02:41:01.963Z,1408588861.963 [Module Loader](DEBUG): Loaded Module: Navigation (Contains the base navigation components)
2014-08-21T02:41:01.963Z,1408588861.963 [Module Loader](DEBUG): Loading Module at Modules/Sample.so
2014-08-21T02:41:01.969Z,1408588861.969 [Module Loader](DEBUG): Loaded Module: Sample (This is a Sample Module of Sample Components)
2014-08-21T02:41:01.970Z,1408588861.970 [Module Loader](DEBUG): Loading Module at Modules/Science.so
2014-08-21T02:41:02.147Z,1408588862.147 [CTD_NeilBrown] Loaded
2014-08-21T02:41:02.147Z,1408588862.147 [ComponentRegistry](DEBUG): Component "CTD_NeilBrown" handled in its own thread.
2014-08-21T02:41:02.149Z,1408588862.149 [CTD_NeilBrown ThreadHandler](DEBUG): Created PCaller Thread at 406C64E0
2014-08-21T02:41:02.149Z,1408588862.149 [CTD_NeilBrown ThreadHandler](INFO): Protected caller Thread ID is 4733
2014-08-21T02:41:02.164Z,1408588862.164 [PAR_Licor] Loaded
2014-08-21T02:41:02.165Z,1408588862.165 [ComponentRegistry](DEBUG): SyncComponent "PAR_Licor" handled in the control thread.
2014-08-21T02:41:02.200Z,1408588862.200 [WetLabsBB2FL] Loaded
2014-08-21T02:41:02.201Z,1408588862.201 [ComponentRegistry](DEBUG): Component "WetLabsBB2FL" handled in its own thread.
2014-08-21T02:41:02.202Z,1408588862.202 [WetLabsBB2FL ThreadHandler](DEBUG): Created PCaller Thread at 406F64E0
2014-08-21T02:41:02.202Z,1408588862.202 [WetLabsBB2FL ThreadHandler](INFO): Protected caller Thread ID is 4734
2014-08-21T02:41:02.203Z,1408588862.203 [Module Loader](DEBUG): Loaded Module: Science (Contains the science components)
2014-08-21T02:41:02.203Z,1408588862.203 [Module Loader](DEBUG): Loading Module at Modules/Sensor.so
2014-08-21T02:41:02.501Z,1408588862.501 [AHRS_sp3003D] Loaded
2014-08-21T02:41:02.502Z,1408588862.502 [ComponentRegistry](DEBUG): SyncComponent "AHRS_sp3003D" handled in the control thread.
2014-08-21T02:41:02.766Z,1408588862.766 [Batt_Ocean_Server] Loaded
2014-08-21T02:41:02.766Z,1408588862.766 [ComponentRegistry](DEBUG): SyncComponent "Batt_Ocean_Server" handled in the control thread.
2014-08-21T02:41:02.841Z,1408588862.841 [DataOverHttps] Loaded
2014-08-21T02:41:02.841Z,1408588862.841 [ComponentRegistry](DEBUG): SyncComponent "DataOverHttps" handled in the control thread.
2014-08-21T02:41:02.855Z,1408588862.855 [Depth_Keller] Loaded
2014-08-21T02:41:02.855Z,1408588862.855 [ComponentRegistry](DEBUG): SyncComponent "Depth_Keller" handled in the control thread.
2014-08-21T02:41:02.990Z,1408588862.990 [DVL_micro] Loaded
2014-08-21T02:41:02.991Z,1408588862.991 [ComponentRegistry](DEBUG): SyncComponent "DVL_micro" handled in the control thread.
2014-08-21T02:41:03.085Z,1408588863.085 [NAL9602] Loaded
2014-08-21T02:41:03.086Z,1408588863.086 [ComponentRegistry](DEBUG): SyncComponent "NAL9602" handled in the control thread.
2014-08-21T02:41:03.128Z,1408588863.128 [Onboard] Loaded
2014-08-21T02:41:03.129Z,1408588863.129 [ComponentRegistry](DEBUG): SyncComponent "Onboard" handled in the control thread.
2014-08-21T02:41:03.136Z,1408588863.136 [Radio_Freewave] Loaded
2014-08-21T02:41:03.136Z,1408588863.136 [ComponentRegistry](DEBUG): Component "Radio_Freewave" handled in its own thread.
2014-08-21T02:41:03.138Z,1408588863.138 [Radio_Freewave ThreadHandler](DEBUG): Created PCaller Thread at 409314E0
2014-08-21T02:41:03.138Z,1408588863.138 [Radio_Freewave ThreadHandler](INFO): Protected caller Thread ID is 4735
2014-08-21T02:41:03.266Z,1408588863.266 [DAT] Loaded
2014-08-21T02:41:03.266Z,1408588863.266 [ComponentRegistry](DEBUG): SyncComponent "DAT" handled in the control thread.
2014-08-21T02:41:03.273Z,1408588863.273 [SCPI] Loaded
2014-08-21T02:41:03.273Z,1408588863.273 [ComponentRegistry](DEBUG): SyncComponent "SCPI" handled in the control thread.
2014-08-21T02:41:03.274Z,1408588863.274 [Module Loader](DEBUG): Loaded Module: Sensor (Contains the sensor components)
2014-08-21T02:41:03.274Z,1408588863.274 [Module Loader](DEBUG): Loading Module at Modules/Servo.so
2014-08-21T02:41:03.374Z,1408588863.374 [BuoyancyServo] Loaded
2014-08-21T02:41:03.374Z,1408588863.374 [ComponentRegistry](DEBUG): SyncComponent "BuoyancyServo" handled in the control thread.
2014-08-21T02:41:03.387Z,1408588863.387 [ElevatorServo] Loaded
2014-08-21T02:41:03.387Z,1408588863.387 [ComponentRegistry](DEBUG): SyncComponent "ElevatorServo" handled in the control thread.
2014-08-21T02:41:03.398Z,1408588863.398 [MassServo] Loaded
2014-08-21T02:41:03.399Z,1408588863.399 [ComponentRegistry](DEBUG): SyncComponent "MassServo" handled in the control thread.
2014-08-21T02:41:03.410Z,1408588863.410 [RudderServo] Loaded
2014-08-21T02:41:03.411Z,1408588863.411 [ComponentRegistry](DEBUG): SyncComponent "RudderServo" handled in the control thread.
2014-08-21T02:41:03.422Z,1408588863.422 [ThrusterServo] Loaded
2014-08-21T02:41:03.422Z,1408588863.422 [ComponentRegistry](DEBUG): SyncComponent "ThrusterServo" handled in the control thread.
2014-08-21T02:41:03.423Z,1408588863.423 [Module Loader](DEBUG): Loaded Module: Servo (This is the module containing motor controllers)
2014-08-21T02:41:03.423Z,1408588863.423 [Module Loader](DEBUG): Loading Module at Modules/Simulator.so
2014-08-21T02:41:03.586Z,1408588863.586 [InternalSim] Loaded
2014-08-21T02:41:03.586Z,1408588863.586 [ComponentRegistry](DEBUG): SyncComponent "InternalSim" handled in the control thread.
2014-08-21T02:41:03.586Z,1408588863.586 [Module Loader](DEBUG): Loaded Module: Simulator (This is the module containing the Simulator)
2014-08-21T02:41:03.587Z,1408588863.587 [Module Loader](DEBUG): Loading Module at Modules/Trigger.so
2014-08-21T02:41:03.611Z,1408588863.611 [Module Loader](DEBUG): Loaded Module: Trigger (Contains triggers for use in missions)
2014-08-21T02:41:03.613Z,1408588863.613 [ComponentRegistry](DEBUG): SyncComponent "MissionManager" handled in the control thread.
2014-08-21T02:41:03.614Z,1408588863.614 [ComponentRegistry](DEBUG): SyncComponent "Reporter" handled in the control thread.
2014-08-21T02:41:03.621Z,1408588863.621 [ComponentRegistry](DEBUG): Component "NavChartDb" handled in its own thread.
2014-08-21T02:41:03.622Z,1408588863.622 [NavChartDb ThreadHandler](DEBUG): Created PCaller Thread at 409E24E0
2014-08-21T02:41:03.622Z,1408588863.622 [NavChartDb ThreadHandler](INFO): Protected caller Thread ID is 4736
2014-08-21T02:41:03.627Z,1408588863.627 [Supervisor](INFO): Main Thread ID is 3219
2014-08-21T02:41:03.627Z,1408588863.627 [Supervisor](DEBUG): Running supervisor.
2014-08-21T02:41:03.628Z,1408588863.628 [CommandLine ThreadHandler](INFO): Handler Thread ID is 4737
2014-08-21T02:41:03.633Z,1408588863.633 [controlThread ThreadHandler](INFO): Handler Thread ID is 4738
2014-08-21T02:41:03.633Z,1408588863.633 [controlThread](DEBUG): Initializing ControlThread
2014-08-21T02:41:03.634Z,1408588863.634 [VerticalControl](DEBUG): Initialize VerticalControlComponent.
2014-08-21T02:41:03.636Z,1408588863.636 [HorizontalControl](DEBUG): Initialize HorizontalControlComponent.
2014-08-21T02:41:03.637Z,1408588863.637 [SpeedControl](DEBUG): Initialize SpeedControlComponent.
2014-08-21T02:41:03.637Z,1408588863.637 [LoopControl](DEBUG): Initialize LoopControlComponent.
2014-08-21T02:41:03.637Z,1408588863.637 [SBIT](INFO): Initialize SBIT Component.
2014-08-21T02:41:03.638Z,1408588863.638 [SBIT](IMPORTANT): Tethys CM Info: SVN revision: 11562
2014-08-21T02:41:03.638Z,1408588863.638 [SBIT](IMPORTANT): Kernel Release: 2.6.27.8
2014-08-21T02:41:03.638Z,1408588863.638 [SBIT](IMPORTANT): Kernel Version:#639 PREEMPT Wed Mar 12 12:53:33 PDT 2014
2014-08-21T02:41:03.639Z,1408588863.639 [IBIT](INFO): Initialize IBIT Component.
2014-08-21T02:41:03.640Z,1408588863.640 [CBIT](DEBUG): Initialize CBIT Component.
2014-08-21T02:41:03.640Z,1408588863.640 [CBIT](INFO): Last reboot was NOT due to watchdog timer.
2014-08-21T02:41:03.641Z,1408588863.641 [logger ThreadHandler](INFO): Handler Thread ID is 4739
2014-08-21T02:41:03.659Z,1408588863.659 [CTD_NeilBrown ThreadHandler](INFO): Handler Thread ID is 4740
2014-08-21T02:41:03.660Z,1408588863.660 [CTD_NeilBrown](DEBUG): Initializing CTD_NeilBrown.
2014-08-21T02:41:03.663Z,1408588863.663 [DepthRateCalculator](DEBUG): Initializing DepthRateCalculator.
2014-08-21T02:41:03.664Z,1408588863.664 [PitchRateCalculator](DEBUG): Initializing PitchRateCalculator.
2014-08-21T02:41:03.664Z,1408588863.664 [SpeedCalculator](DEBUG): Initializing SpeedCalculator.
2014-08-21T02:41:03.664Z,1408588863.664 [TempGradientCalculator](DEBUG): Initializing TempGradientCalculator.
2014-08-21T02:41:03.665Z,1408588863.665 [YawRateCalculator](DEBUG): Initializing YawRateCalculator.
2014-08-21T02:41:03.672Z,1408588863.672 [HFRadarCompactModelForecaster](DEBUG): Found new ECs!
2014-08-21T02:41:03.683Z,1408588863.683 [CTD_NeilBrown](INFO): Opening uart, block timeout 10ths=4
2014-08-21T02:41:03.692Z,1408588863.692 [WetLabsBB2FL ThreadHandler](INFO): Handler Thread ID is 4742
2014-08-21T02:41:03.694Z,1408588863.694 [WetLabsBB2FL](INFO): Powering down
2014-08-21T02:41:03.724Z,1408588863.724 [Radio_Freewave ThreadHandler](INFO): Handler Thread ID is 4743
2014-08-21T02:41:03.764Z,1408588863.764 [NavChartDb ThreadHandler](INFO): Handler Thread ID is 4745
2014-08-21T02:41:03.767Z,1408588863.767 [NavChartDb](INFO): Looking for Electronic Nav Chart files in directory: Resources
2014-08-21T02:41:03.768Z,1408588863.768 [NavChartDb](INFO): Already Loaded Electronic Nav Chart data from US1WC07M.000
2014-08-21T02:41:03.768Z,1408588863.768 [NavChartDb](INFO): Already Loaded Electronic Nav Chart data from US2WC11M.000
2014-08-21T02:41:03.769Z,1408588863.769 [NavChartDb](INFO): Already Loaded Electronic Nav Chart data from US3CA52M.000
2014-08-21T02:41:03.769Z,1408588863.769 [NavChartDb](INFO): Already Loaded Electronic Nav Chart data from US4CA60M.000
2014-08-21T02:41:03.769Z,1408588863.769 [NavChartDb](INFO): Already Loaded Electronic Nav Chart data from US5CA50M.000
2014-08-21T02:41:03.769Z,1408588863.769 [NavChartDb](INFO): Already Loaded Electronic Nav Chart data from US5CA61M.000
2014-08-21T02:41:03.770Z,1408588863.770 [NavChartDb](INFO): Already Loaded Electronic Nav Chart data from US5CA62M.000
2014-08-21T02:41:03.770Z,1408588863.770 [NavChartDb](INFO): Already Loaded Electronic Nav Chart data from US5CA83M.000
2014-08-21T02:41:04.083Z,1408588864.083 [Radio_Freewave](INFO): Powering up
2014-08-21T02:41:04.890Z,1408588864.890 [Radio_Freewave](IMPORTANT): Starting PPPD with command:/sbin/pppd nocrtscts /dev/ttyS1 noauth 115200 10.1.1.2:10.1.1.1 persist maxfail 0
2014-08-21T02:41:13.281Z,1408588873.281 [HFRadarCompactModelForecaster](IMPORTANT): forecast time 201408202300 published
2014-08-21T02:41:13.301Z,1408588873.301 [HFRCMSpaceInterpolator](DEBUG): Initializing HFRCMSpaceInterpolator component with verbosity level 0.
2014-08-21T02:41:13.318Z,1408588873.318 [HFRCMTimeInterpolator](DEBUG): Initializing HFRCMTimeInterpolator component.
2014-08-21T02:41:13.319Z,1408588873.319 [HFRCMReconstructedInterpolator](INFO): Initializing HFRCMReconstructedInterpolator component with velocityAccuracy_ = 0.300000 m/s.
2014-08-21T02:41:13.321Z,1408588873.321 [HFRCMSurfaceCurrentAtVehicleLocation](DEBUG): Initializing HFRCMSurfaceCurrentAtVehicleLocation component.
2014-08-21T02:41:13.321Z,1408588873.321 [DeadReckonUsingMultipleVelocitySourcesVector](DEBUG): Initializing DeadReckonUsingMultipleVelocitySourcesVector component.
2014-08-21T02:41:13.322Z,1408588873.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2014-08-21T02:41:13.322Z,1408588873.322 [DeadReckonWithRespectToWater](DEBUG): Initializing DeadReckonWithRespectToWater component.
2014-08-21T02:41:13.323Z,1408588873.323 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2014-08-21T02:41:13.323Z,1408588873.323 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2014-08-21T02:41:13.324Z,1408588873.324 [DeadReckonUsingCompactModelForecast](DEBUG): Initializing DeadReckonUsingCompactModelForecast component.
2014-08-21T02:41:13.324Z,1408588873.324 [NavChart](DEBUG): Initialize NavChart Navigation.
2014-08-21T02:41:13.324Z,1408588873.324 [UniversalFixResidualReporter](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2014-08-21T02:41:14.825Z,1408588874.825 [Batt_Ocean_Server](ERROR): Batt_Ocean_Server A initialization uart error: serial timeout
2014-08-21T02:41:14.825Z,1408588874.825 [Batt_Ocean_Server](ERROR): Ocean Server Batteries failed to initialize. Re-initializing
2014-08-21T02:41:14.825Z,1408588874.825 [Batt_Ocean_Server] Communications Fault, FailCount= 1
2014-08-21T02:41:14.825Z,1408588874.825 [Batt_Ocean_Server](ERROR): Communications Fault
2014-08-21T02:41:14.836Z,1408588874.836 [InternalSim](DEBUG):  InternalSim initializing...
2014-08-21T02:41:14.949Z,1408588874.949 [MissionManager](INFO): Loading Mission: Missions/Startup.xml
2014-08-21T02:41:14.992Z,1408588874.992 [Startup:A.GoToSurface](DEBUG): Construct GoToSurface.
2014-08-21T02:41:15.017Z,1408588875.017 [MissionManager](DEBUG): 
<?xml version="1.0" encoding="UTF-8"?>
<Mission xmlns="Tethys"
       xmlns:Control="Tethys/Control"
       xmlns:Guidance="Tethys/Guidance" 
       xmlns:Units="Tethys/Units"
       xmlns:Universal="Tethys/Universal"
       xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
       xsi:schemaLocation="Tethys http://aosn.mbari.org/tethys/Xml/Tethys.xsd
                           Tethys/Control http://aosn.mbari.org/tethys/Xml/Control.xsd
                           Tethys/Guidance http://aosn.mbari.org/tethys/Xml/Guidance.xsd
                           Tethys/Units http://aosn.mbari.org/tethys/Xml/Units.xsd
                           Tethys/Universal http://aosn.mbari.org/tethys/Xml/Universal.xsd"
       Id="Startup">

    <Guidance:GoToSurface>
        <Progression/>
    </Guidance:GoToSurface>

    <Aggregate Id="StartupSatComms">

        <Sequence/>

        <ReadDatum>
            <Timeout Duration="P1M" />
            <Universal:latitude_fix/>
        </ReadDatum>

        <ReadDatum>
            <Timeout Duration="P1M" />
            <Universal:platform_communications/>
        </ReadDatum>

    </Aggregate>

</Mission>


2014-08-21T02:41:15.018Z,1408588875.018 [MissionManager](INFO): Loading Mission: Missions/Default.xml
2014-08-21T02:41:15.095Z,1408588875.095 [MissionManager](INFO): DefineArg Default.TimeMissionWasStarted = 0.000000 h
2014-08-21T02:41:15.107Z,1408588875.107 [MissionManager](INFO): DefineArg Default.ElapsedSinceMissionWasStarted = 0.000000 h
2014-08-21T02:41:15.111Z,1408588875.111 [Default:B.GoToSurface](DEBUG): Construct GoToSurface.
2014-08-21T02:41:15.144Z,1408588875.144 [Default:CheckIn:A.SetSpeed](DEBUG): Construct.
2014-08-21T02:41:15.174Z,1408588875.174 [Default:CheckIn:Read_Iridium:A_Timeout:A.Execute](DEBUG): Construct Execute.
2014-08-21T02:41:15.203Z,1408588875.203 [Default:WaitAtTheSurface:RunApplicationAtLowSpeed.SetSpeed](DEBUG): Construct.
2014-08-21T02:41:15.229Z,1408588875.229 [MissionManager](DEBUG): 
<?xml version="1.0" encoding="UTF-8"?>
<Mission xmlns="Tethys"
xmlns:Control="Tethys/Control"
xmlns:Guidance="Tethys/Guidance" 
xmlns:Units="Tethys/Units"
xmlns:Universal="Tethys/Universal"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:schemaLocation="Tethys http://aosn.mbari.org/tethys/Xml/Tethys.xsd
Tethys/Control http://aosn.mbari.org/tethys/Xml/Control.xsd
Tethys/Guidance http://aosn.mbari.org/tethys/Xml/Guidance.xsd
Tethys/Units http://aosn.mbari.org/tethys/Xml/Units.xsd
Tethys/Universal http://aosn.mbari.org/tethys/Xml/Universal.xsd"
Id="Default">

    <DefineArg Name="TimeMissionWasStarted"><Units:hour/><Value>0</Value></DefineArg>

    <DefineArg Name="ElapsedSinceMissionWasStarted"><Units:hour/><Value>0</Value></DefineArg>

    <Aggregate Id="StartClock">

        <Sequence/>

        <Assign><Arg Name="TimeMissionWasStarted"/><Universal:time/></Assign>

    </Aggregate>

    <Guidance:GoToSurface>
        <Progression/>
    </Guidance:GoToSurface>

    <Aggregate Id="CheckIn">

        <When>
            <Elapsed><Universal:platform_communications/></Elapsed>
            <Gt><Units:minute/><Value>5.0</Value></Gt>
            <And><Universal:platform_conversation/><Eq><True/></Eq></And>
            <Or><Elapsed><Universal:platform_communications/></Elapsed><Gt><Units:hour/><Value>1.0</Value></Gt></Or>
        </When>

<!-- TODO: Do we really want this When operating on platform_communications? or on something else like time_fix? -->

<!-- Run application at high speed -->

        <Guidance:SetSpeed>
            <Parallel/>
            <Setting><Guidance:SetSpeed.period/><Units:millisecond/><Value>400</Value></Setting>
        </Guidance:SetSpeed>

        <ReadDatum Id="Read_GPS">
            <Timeout Duration="P5M"/>
<!-- NOTE: Original Default.xml didn't have a timeout on the GPS read, so theoretically could have hung indefinitely there... -->
            <Universal:latitude_fix/>
        </ReadDatum>

<!-- Do data comms -->

        <ReadDatum Id="Read_Iridium">
            <Timeout Duration="P2H">
                <Guidance:Execute>
                    <Sequence/>
                    <Setting><Guidance:Execute.command/><String>Burn 300</String></Setting>
                </Guidance:Execute>
                <Syslog Severity="Critical">Dropped drop weight due to communications timeout</Syslog>
            </Timeout>
            <Universal:platform_communications/>
        </ReadDatum>

    </Aggregate>

    <Aggregate Id="UpdateAndReportMinutesSinceMissionStarted">

        <When>
            <Elapsed><Arg Name="ElapsedSinceMissionWasStarted"/></Elapsed>
            <Gt><Units:minute/><Value>5.0</Value></Gt>
        </When>

        <Assign><Arg Name="ElapsedSinceMissionWasStarted"/><Universal:time/><Sub><Arg Name="TimeMissionWasStarted"/></Sub></Assign>

        <Syslog Severity="Important">Default mission has been running for <Arg Name="ElapsedSinceMissionWasStarted"/><Units:minute/></Syslog>

    </Aggregate>

    <Aggregate Id="WaitAtTheSurface">

        <Sequence/>

        <Guidance:SetSpeed Id="RunApplicationAtLowSpeed">
            <Parallel/>
            <Setting><Guidance:SetSpeed.period/><Units:second/><Value>5</Value></Setting>
        </Guidance:SetSpeed>

    </Aggregate>

</Mission>


2014-08-21T02:41:15.237Z,1408588875.237 [controlThread](DEBUG): Component order: CycleStarter,InternalSim,PAR_Licor,AHRS_sp3003D,Batt_Ocean_Server,DataOverHttps,Depth_Keller,DVL_micro,NAL9602,Onboard,DAT,SCPI,PAR_Licor,Depth_Keller,DepthRateCalculator,PitchRateCalculator,SpeedCalculator,TempGradientCalculator,YawRateCalculator,HFRadarCompactModelForecaster,HFRCMSpaceInterpolator,HFRCMTimeInterpolator,HFRCMReconstructedInterpolator,HFRCMSurfaceCurrentAtVehicleLocation,DeadReckonUsingMultipleVelocitySourcesVector,DeadReckonUsingMultipleVelocitySources,DeadReckonWithRespectToWater,DeadReckonWithRespectToSeafloor,DeadReckonUsingDVLWaterTrack,DeadReckonUsingCompactModelForecast,NavChart,UniversalFixResidualReporter,MissionManager,VerticalControl,HorizontalControl,SpeedControl,LoopControl,BuoyancyServo,ElevatorServo,MassServo,RudderServo,ThrusterServo,SBIT,IBIT,CBIT,Reporter,LogSplitter,
2014-08-21T02:41:15.412Z,1408588875.412 [AHRS_sp3003D](DEBUG): Initializing AHRS_sp3003D.
2014-08-21T02:41:15.496Z,1408588875.496 [Depth_Keller](ERROR): Pressure reading out of range: 1831.023193 decibar
2014-08-21T02:41:15.557Z,1408588875.557 [DVL_micro](INFO): Initializing
2014-08-21T02:41:15.592Z,1408588875.592 [NAL9602](INFO): Powering up NAL9602
2014-08-21T02:41:15.734Z,1408588875.734 [DAT](INFO): Powering up
2014-08-21T02:41:15.734Z,1408588875.734 [DAT](DEBUG): Initializing DAT.
2014-08-21T02:41:23.319Z,1408588883.319 [DeadReckonUsingMultipleVelocitySourcesVector](DEBUG): Could not determine rotation from vehicle frame to navigation frame.
2014-08-21T02:41:23.326Z,1408588883.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Could not determine rotation from vehicle frame to navigation frame.
2014-08-21T02:41:23.342Z,1408588883.342 [DeadReckonWithRespectToWater](DEBUG): Could not determine rotation from vehicle frame to navigation frame.
2014-08-21T02:41:23.368Z,1408588883.368 [DeadReckonWithRespectToSeafloor](DEBUG): Could not determine rotation from vehicle frame to navigation frame.
2014-08-21T02:41:23.383Z,1408588883.383 [DeadReckonUsingDVLWaterTrack](DEBUG): Could not determine rotation from vehicle frame to navigation frame.
2014-08-21T02:41:23.389Z,1408588883.389 [DeadReckonUsingCompactModelForecast](DEBUG): Could not determine rotation from vehicle frame to navigation frame.
2014-08-21T02:41:23.530Z,1408588883.530 [BuoyancyServo](DEBUG): Initializing EZServoServo.
2014-08-21T02:41:23.538Z,1408588883.538 [BuoyancyServo](DEBUG): Initializing BuoyancyServo.
2014-08-21T02:41:23.544Z,1408588883.544 [ElevatorServo](DEBUG): Initializing EZServoServo.
2014-08-21T02:41:23.570Z,1408588883.570 [ElevatorServo](DEBUG): Initializing ElevatorServo.
2014-08-21T02:41:23.576Z,1408588883.576 [MassServo](DEBUG): Initializing EZServoServo.
2014-08-21T02:41:23.582Z,1408588883.582 [MassServo](DEBUG): Initializing MassServo.
2014-08-21T02:41:23.588Z,1408588883.588 [RudderServo](DEBUG): Initializing EZServoServo.
2014-08-21T02:41:23.608Z,1408588883.608 [RudderServo](DEBUG): Initializing RudderServo.
2014-08-21T02:41:23.614Z,1408588883.614 [ThrusterServo](DEBUG): Initializing EZServoServo.
2014-08-21T02:41:23.622Z,1408588883.622 [ThrusterServo](DEBUG): Initializing ThrusterServo.
2014-08-21T02:41:23.665Z,1408588883.665 [CBIT](ERROR): Communications Fault in component: Batt_Ocean_Server
2014-08-21T02:41:23.665Z,1408588883.665 [CBIT](INFO): Clearing failed state for component Batt_Ocean_Server
2014-08-21T02:41:23.665Z,1408588883.665 [Batt_Ocean_Server] No Fault, FailCount= 1
2014-08-21T02:41:25.874Z,1408588885.874 [Batt_Ocean_Server](INFO): Ocean Server Batteries initialized
2014-08-21T02:41:26.073Z,1408588886.073 [DeadReckonUsingMultipleVelocitySourcesVector](DEBUG): Could not determine rotation from vehicle frame to navigation frame.
2014-08-21T02:41:26.074Z,1408588886.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Could not determine rotation from vehicle frame to navigation frame.
2014-08-21T02:41:26.075Z,1408588886.075 [DeadReckonWithRespectToWater](DEBUG): Could not determine rotation from vehicle frame to navigation frame.
2014-08-21T02:41:26.076Z,1408588886.076 [DeadReckonWithRespectToSeafloor](DEBUG): Could not determine rotation from vehicle frame to navigation frame.
2014-08-21T02:41:26.076Z,1408588886.076 [DeadReckonUsingDVLWaterTrack](DEBUG): Could not determine rotation from vehicle frame to navigation frame.
2014-08-21T02:41:26.077Z,1408588886.077 [DeadReckonUsingCompactModelForecast](DEBUG): Could not determine rotation from vehicle frame to navigation frame.
2014-08-21T02:41:26.384Z,1408588886.384 [SBIT](IMPORTANT): Beginning Startup BIT
2014-08-21T02:41:26.387Z,1408588886.387 [CBIT](IMPORTANT): Beginning GF scan
2014-08-21T02:41:27.869Z,1408588887.869 [NAL9602](INFO): NAL9602 initialized
2014-08-21T02:41:29.478Z,1408588889.478 [DataOverHttps](INFO): setting available, lastComms_.elapsed()=0.003607
2014-08-21T02:41:30.241Z,1408588890.241 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T02:41:31.304Z,1408588891.304 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T02:41:31.328Z,1408588891.328 [DAT](INFO): no user prompt found in:
2014-08-21T02:41:31.328Z,1408588891.328 [DAT](ERROR): no user prompt; deviceResponse_: 
2014-08-21T02:41:31.888Z,1408588891.888 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T02:41:32.427Z,1408588892.427 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T02:41:32.484Z,1408588892.484 [DAT](INFO): no user prompt found in:user:1> 00800 bits/sec
2014-08-21T02:41:32.484Z,1408588892.484 [DAT](ERROR): no user prompt; deviceResponse_: 
2014-08-21T02:41:33.026Z,1408588893.026 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T02:41:33.064Z,1408588893.064 [DAT](INFO): no user prompt found in:
2014-08-21T02:41:33.065Z,1408588893.065 [DAT](ERROR): no user prompt; deviceResponse_: 
2014-08-21T02:41:33.723Z,1408588893.723 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T02:41:33.766Z,1408588893.766 [DAT](INFO): no user prompt found in:
2014-08-21T02:41:33.766Z,1408588893.766 [DAT](ERROR): no user prompt; deviceResponse_: 
2014-08-21T02:41:34.360Z,1408588894.360 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T02:41:34.398Z,1408588894.398 [DAT](INFO): no user prompt found in:
2014-08-21T02:41:34.399Z,1408588894.399 [DAT](ERROR): no user prompt; deviceResponse_: 
2014-08-21T02:41:34.953Z,1408588894.953 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T02:41:34.979Z,1408588894.979 [DAT](FAULT): failed to initialize; deviceResponse_:
2014-08-21T02:41:34.980Z,1408588894.980 [DAT] Communications Fault, FailCount= 1
2014-08-21T02:41:34.980Z,1408588894.980 [DAT](ERROR): Communications Fault
2014-08-21T02:41:35.169Z,1408588895.169 [CBIT](ERROR): Communications Fault in component: DAT
2014-08-21T02:41:35.534Z,1408588895.534 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T02:41:35.579Z,1408588895.579 [DAT](INFO): Powering down
2014-08-21T02:41:36.463Z,1408588896.463 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T02:41:37.129Z,1408588897.129 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T02:41:37.316Z,1408588897.316 [CBIT](INFO): Clearing failed state for component DAT
2014-08-21T02:41:37.316Z,1408588897.316 [DAT] No Fault, FailCount= 1
2014-08-21T02:41:37.677Z,1408588897.677 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T02:41:38.206Z,1408588898.206 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T02:41:38.735Z,1408588898.735 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T02:41:38.749Z,1408588898.749 [DAT](INFO): Powering up
2014-08-21T02:41:38.749Z,1408588898.749 [DAT](DEBUG): Initializing DAT.
2014-08-21T02:41:39.316Z,1408588899.316 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T02:41:39.342Z,1408588899.342 [DAT](INFO): no user prompt found in:
2014-08-21T02:41:39.342Z,1408588899.342 [DAT](ERROR): no user prompt; deviceResponse_: 
2014-08-21T02:41:39.882Z,1408588899.882 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T02:41:39.942Z,1408588899.942 [DAT](INFO): no user prompt found in:
2014-08-21T02:41:39.943Z,1408588899.943 [DAT](ERROR): no user prompt; deviceResponse_: 
2014-08-21T02:41:40.522Z,1408588900.522 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T02:41:40.564Z,1408588900.564 [DAT](INFO): no user prompt found in:
2014-08-21T02:41:40.564Z,1408588900.564 [DAT](ERROR): no user prompt; deviceResponse_: 
2014-08-21T02:41:41.087Z,1408588901.087 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T02:41:41.115Z,1408588901.115 [DAT](INFO): no user prompt found in:
2014-08-21T02:41:41.115Z,1408588901.115 [DAT](ERROR): no user prompt; deviceResponse_: 
2014-08-21T02:41:41.744Z,1408588901.744 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T02:41:41.778Z,1408588901.778 [DAT](INFO): no user prompt found in:
2014-08-21T02:41:41.778Z,1408588901.778 [DAT](ERROR): no user prompt; deviceResponse_: 
2014-08-21T02:41:42.305Z,1408588902.305 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T02:41:42.339Z,1408588902.339 [DAT](INFO): no user prompt found in:
2014-08-21T02:41:42.339Z,1408588902.339 [DAT](ERROR): no user prompt; deviceResponse_: 
2014-08-21T02:41:43.242Z,1408588903.242 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T02:41:43.296Z,1408588903.296 [DAT](INFO): no user prompt found in:
2014-08-21T02:41:43.297Z,1408588903.297 [DAT](ERROR): no user prompt; deviceResponse_: 
2014-08-21T02:41:43.839Z,1408588903.839 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T02:41:43.853Z,1408588903.853 [DAT](INFO): no user prompt found in:+++r:1> 00800 bits/sec
2014-08-21T02:41:43.854Z,1408588903.854 [DAT](ERROR): no user prompt; deviceResponse_: 
2014-08-21T02:41:44.380Z,1408588904.380 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T02:41:44.406Z,1408588904.406 [DAT](INFO): no user prompt found in:+++r:1> 00800 bits/sec
2014-08-21T02:41:44.406Z,1408588904.406 [DAT](ERROR): no user prompt; deviceResponse_: 
2014-08-21T02:41:44.925Z,1408588904.925 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T02:41:44.967Z,1408588904.967 [DAT](INFO): no user prompt found in:
2014-08-21T02:41:44.967Z,1408588904.967 [DAT](ERROR): no user prompt; deviceResponse_: 
2014-08-21T02:41:45.494Z,1408588905.494 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T02:41:45.520Z,1408588905.520 [DAT](INFO): no user prompt found in:
2014-08-21T02:41:45.520Z,1408588905.520 [DAT](ERROR): no user prompt; deviceResponse_: 
2014-08-21T02:41:46.099Z,1408588906.099 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T02:41:46.129Z,1408588906.129 [DAT](INFO): no user prompt found in:
2014-08-21T02:41:46.129Z,1408588906.129 [DAT](ERROR): no user prompt; deviceResponse_: 
2014-08-21T02:41:46.888Z,1408588906.888 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T02:41:46.966Z,1408588906.966 [DAT](INFO): no user prompt found in:
2014-08-21T02:41:46.966Z,1408588906.966 [DAT](ERROR): no user prompt; deviceResponse_: 
2014-08-21T02:41:47.465Z,1408588907.465 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T02:41:47.491Z,1408588907.491 [DAT](INFO): no user prompt found in:
2014-08-21T02:41:47.491Z,1408588907.491 [DAT](ERROR): no user prompt; deviceResponse_: 
2014-08-21T02:41:47.978Z,1408588907.978 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T02:41:47.996Z,1408588907.996 [DAT](INFO): no user prompt found in:
2014-08-21T02:41:47.996Z,1408588907.996 [DAT](ERROR): no user prompt; deviceResponse_: 
2014-08-21T02:41:48.514Z,1408588908.514 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T02:41:48.557Z,1408588908.557 [DAT](INFO): no user prompt found in:
2014-08-21T02:41:48.557Z,1408588908.557 [DAT](ERROR): no user prompt; deviceResponse_: 
2014-08-21T02:41:49.143Z,1408588909.143 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T02:41:49.164Z,1408588909.164 [DAT](INFO): no user prompt found in:
2014-08-21T02:41:49.164Z,1408588909.164 [DAT](ERROR): no user prompt; deviceResponse_: 
2014-08-21T02:41:49.640Z,1408588909.640 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T02:41:49.674Z,1408588909.674 [DAT](INFO): no user prompt found in:
2014-08-21T02:41:49.674Z,1408588909.674 [DAT](ERROR): no user prompt; deviceResponse_: 
2014-08-21T02:41:50.141Z,1408588910.141 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T02:41:50.214Z,1408588910.214 [DAT](INFO): no user prompt found in:
2014-08-21T02:41:50.215Z,1408588910.215 [DAT](ERROR): no user prompt; deviceResponse_: 
2014-08-21T02:41:50.734Z,1408588910.734 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T02:41:50.756Z,1408588910.756 [DAT](INFO): no user prompt found in:
2014-08-21T02:41:50.756Z,1408588910.756 [DAT](ERROR): no user prompt; deviceResponse_: 
2014-08-21T02:41:51.226Z,1408588911.226 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T02:41:51.891Z,1408588911.891 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T02:41:52.368Z,1408588912.368 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T02:41:52.381Z,1408588912.381 [NAL9602](IMPORTANT): GPS fix at: 1408588911.00
2014-08-21T02:41:52.969Z,1408588912.969 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T02:41:53.011Z,1408588913.011 [DAT](INFO): no user prompt found in:
2014-08-21T02:41:53.012Z,1408588913.012 [DAT](ERROR): no user prompt; deviceResponse_: 
2014-08-21T02:41:53.028Z,1408588913.028 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802444, -121.787186) is outside the bounding box
2014-08-21T02:41:53.030Z,1408588913.030 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802444, -121.787186) is outside the bounding box
2014-08-21T02:41:53.169Z,1408588913.169 [CBIT](IMPORTANT): No ground fault detected
2014-08-21T02:41:53.551Z,1408588913.551 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T02:41:53.641Z,1408588913.641 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802444, -121.787186) is outside the bounding box
2014-08-21T02:41:53.643Z,1408588913.643 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802444, -121.787186) is outside the bounding box
2014-08-21T02:41:54.112Z,1408588914.112 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T02:41:54.129Z,1408588914.129 [DAT](INFO): no user prompt found in:user:1> 00800 bits/sec
2014-08-21T02:41:54.129Z,1408588914.129 [DAT](ERROR): no user prompt; deviceResponse_: 
2014-08-21T02:41:54.146Z,1408588914.146 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802444, -121.787186) is outside the bounding box
2014-08-21T02:41:54.148Z,1408588914.148 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802444, -121.787186) is outside the bounding box
2014-08-21T02:41:54.712Z,1408588914.712 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T02:41:54.734Z,1408588914.734 [DAT](INFO): no user prompt found in:
2014-08-21T02:41:54.734Z,1408588914.734 [DAT](ERROR): no user prompt; deviceResponse_: 
2014-08-21T02:41:54.746Z,1408588914.746 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802444, -121.787186) is outside the bounding box
2014-08-21T02:41:54.752Z,1408588914.752 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802444, -121.787186) is outside the bounding box
2014-08-21T02:41:55.220Z,1408588915.220 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T02:41:55.247Z,1408588915.247 [DAT](INFO): no user prompt found in:
2014-08-21T02:41:55.247Z,1408588915.247 [DAT](ERROR): no user prompt; deviceResponse_: 
2014-08-21T02:41:55.263Z,1408588915.263 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802444, -121.787186) is outside the bounding box
2014-08-21T02:41:55.265Z,1408588915.265 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802444, -121.787186) is outside the bounding box
2014-08-21T02:41:55.789Z,1408588915.789 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T02:41:55.812Z,1408588915.812 [DAT](INFO): no user prompt found in:
2014-08-21T02:41:55.812Z,1408588915.812 [DAT](ERROR): no user prompt; deviceResponse_: 
2014-08-21T02:41:55.823Z,1408588915.823 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802444, -121.787186) is outside the bounding box
2014-08-21T02:41:55.850Z,1408588915.850 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802444, -121.787186) is outside the bounding box
2014-08-21T02:41:56.303Z,1408588916.303 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T02:41:56.317Z,1408588916.317 [DAT](INFO): no user prompt found in:
2014-08-21T02:41:56.317Z,1408588916.317 [DAT](ERROR): no user prompt; deviceResponse_: 
2014-08-21T02:41:56.328Z,1408588916.328 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802444, -121.787186) is outside the bounding box
2014-08-21T02:41:56.330Z,1408588916.330 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802444, -121.787186) is outside the bounding box
2014-08-21T02:41:56.999Z,1408588916.999 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T02:41:57.089Z,1408588917.089 [DAT](INFO): no user prompt found in:
2014-08-21T02:41:57.089Z,1408588917.089 [DAT](ERROR): no user prompt; deviceResponse_: 
2014-08-21T02:41:57.104Z,1408588917.104 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802444, -121.787186) is outside the bounding box
2014-08-21T02:41:57.115Z,1408588917.115 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802444, -121.787186) is outside the bounding box
2014-08-21T02:41:57.604Z,1408588917.604 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T02:41:57.615Z,1408588917.615 [DAT](INFO): no user prompt found in:
2014-08-21T02:41:57.615Z,1408588917.615 [DAT](ERROR): no user prompt; deviceResponse_: 
2014-08-21T02:41:57.700Z,1408588917.700 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802444, -121.787186) is outside the bounding box
2014-08-21T02:41:57.702Z,1408588917.702 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802444, -121.787186) is outside the bounding box
2014-08-21T02:41:58.137Z,1408588918.137 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T02:41:58.150Z,1408588918.150 [DAT](FAULT): failed to initialize; deviceResponse_:
2014-08-21T02:41:58.150Z,1408588918.150 [DAT] Communications Fault, FailCount= 2
2014-08-21T02:41:58.151Z,1408588918.151 [DAT](ERROR): Communications Fault
2014-08-21T02:41:58.162Z,1408588918.162 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802444, -121.787186) is outside the bounding box
2014-08-21T02:41:58.168Z,1408588918.168 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802444, -121.787186) is outside the bounding box
2014-08-21T02:41:58.264Z,1408588918.264 [CBIT](ERROR): Communications Fault in component: DAT
2014-08-21T02:41:58.650Z,1408588918.650 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T02:41:58.700Z,1408588918.700 [DAT](INFO): Powering down
2014-08-21T02:41:58.844Z,1408588918.844 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802444, -121.787186) is outside the bounding box
2014-08-21T02:41:58.858Z,1408588918.858 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802444, -121.787186) is outside the bounding box
2014-08-21T02:41:59.299Z,1408588919.299 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T02:41:59.299Z,1408588919.299 [NAL9602](INFO): Powering down
2014-08-21T02:41:59.319Z,1408588919.319 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802444, -121.787186) is outside the bounding box
2014-08-21T02:41:59.326Z,1408588919.326 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802444, -121.787186) is outside the bounding box
2014-08-21T02:41:59.787Z,1408588919.787 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T02:41:59.839Z,1408588919.839 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802444, -121.787186) is outside the bounding box
2014-08-21T02:41:59.841Z,1408588919.841 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802444, -121.787186) is outside the bounding box
2014-08-21T02:41:59.909Z,1408588919.909 [CBIT](INFO): Clearing failed state for component DAT
2014-08-21T02:41:59.910Z,1408588919.910 [DAT] No Fault, FailCount= 2
2014-08-21T02:42:00.304Z,1408588920.304 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T02:42:00.386Z,1408588920.386 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802444, -121.787186) is outside the bounding box
2014-08-21T02:42:00.396Z,1408588920.396 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802444, -121.787186) is outside the bounding box
2014-08-21T02:42:00.901Z,1408588920.901 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T02:42:00.927Z,1408588920.927 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802444, -121.787186) is outside the bounding box
2014-08-21T02:42:00.929Z,1408588920.929 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802444, -121.787186) is outside the bounding box
2014-08-21T02:42:01.374Z,1408588921.374 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T02:42:01.410Z,1408588921.410 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802444, -121.787186) is outside the bounding box
2014-08-21T02:42:01.412Z,1408588921.412 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802444, -121.787186) is outside the bounding box
2014-08-21T02:42:01.871Z,1408588921.871 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T02:42:01.889Z,1408588921.889 [DAT](INFO): Powering up
2014-08-21T02:42:01.889Z,1408588921.889 [DAT](DEBUG): Initializing DAT.
2014-08-21T02:42:01.952Z,1408588921.952 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802444, -121.787186) is outside the bounding box
2014-08-21T02:42:01.954Z,1408588921.954 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802444, -121.787186) is outside the bounding box
2014-08-21T02:42:02.604Z,1408588922.604 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T02:42:02.634Z,1408588922.634 [DAT](INFO): no user prompt found in:
2014-08-21T02:42:02.638Z,1408588922.638 [DAT](ERROR): no user prompt; deviceResponse_: 
2014-08-21T02:42:02.650Z,1408588922.650 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802444, -121.787186) is outside the bounding box
2014-08-21T02:42:02.656Z,1408588922.656 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802444, -121.787186) is outside the bounding box
2014-08-21T02:42:03.129Z,1408588923.129 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T02:42:03.157Z,1408588923.157 [DAT](INFO): no user prompt found in:
2014-08-21T02:42:03.157Z,1408588923.157 [DAT](ERROR): no user prompt; deviceResponse_: 
2014-08-21T02:42:03.173Z,1408588923.173 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802444, -121.787186) is outside the bounding box
2014-08-21T02:42:03.180Z,1408588923.180 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802444, -121.787186) is outside the bounding box
2014-08-21T02:42:03.641Z,1408588923.641 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T02:42:03.718Z,1408588923.718 [DAT](INFO): no user prompt found in:
2014-08-21T02:42:03.718Z,1408588923.718 [DAT](ERROR): no user prompt; deviceResponse_: 
2014-08-21T02:42:03.742Z,1408588923.742 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802444, -121.787186) is outside the bounding box
2014-08-21T02:42:03.752Z,1408588923.752 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802444, -121.787186) is outside the bounding box
2014-08-21T02:42:04.202Z,1408588924.202 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T02:42:04.253Z,1408588924.253 [DAT](INFO): no user prompt found in:
2014-08-21T02:42:04.253Z,1408588924.253 [DAT](ERROR): no user prompt; deviceResponse_: 
2014-08-21T02:42:04.314Z,1408588924.314 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802444, -121.787186) is outside the bounding box
2014-08-21T02:42:04.316Z,1408588924.316 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802444, -121.787186) is outside the bounding box
2014-08-21T02:42:04.739Z,1408588924.739 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T02:42:04.758Z,1408588924.758 [DAT](INFO): no user prompt found in:
2014-08-21T02:42:04.758Z,1408588924.758 [DAT](ERROR): no user prompt; deviceResponse_: 
2014-08-21T02:42:04.814Z,1408588924.814 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802444, -121.787186) is outside the bounding box
2014-08-21T02:42:04.816Z,1408588924.816 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802444, -121.787186) is outside the bounding box
2014-08-21T02:42:05.264Z,1408588925.264 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T02:42:05.290Z,1408588925.290 [DAT](INFO): no user prompt found in:
2014-08-21T02:42:05.291Z,1408588925.291 [DAT](ERROR): no user prompt; deviceResponse_: 
2014-08-21T02:42:05.302Z,1408588925.302 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802444, -121.787186) is outside the bounding box
2014-08-21T02:42:05.308Z,1408588925.308 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802444, -121.787186) is outside the bounding box
2014-08-21T02:42:05.826Z,1408588925.826 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T02:42:05.833Z,1408588925.833 [DAT](INFO): no user prompt found in:
2014-08-21T02:42:05.834Z,1408588925.834 [DAT](ERROR): no user prompt; deviceResponse_: 
2014-08-21T02:42:05.865Z,1408588925.865 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802444, -121.787186) is outside the bounding box
2014-08-21T02:42:05.880Z,1408588925.880 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802444, -121.787186) is outside the bounding box
2014-08-21T02:42:06.286Z,1408588926.286 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T02:42:06.293Z,1408588926.293 [DAT](INFO): no user prompt found in:
2014-08-21T02:42:06.293Z,1408588926.293 [DAT](ERROR): no user prompt; deviceResponse_: 
2014-08-21T02:42:06.341Z,1408588926.341 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802444, -121.787186) is outside the bounding box
2014-08-21T02:42:06.343Z,1408588926.343 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802444, -121.787186) is outside the bounding box
2014-08-21T02:42:06.735Z,1408588926.735 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T02:42:06.799Z,1408588926.799 [DAT](INFO): no user prompt found in:+++r:1> 00800 bits/sec
2014-08-21T02:42:06.800Z,1408588926.800 [DAT](ERROR): no user prompt; deviceResponse_: 
2014-08-21T02:42:06.840Z,1408588926.840 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802444, -121.787186) is outside the bounding box
2014-08-21T02:42:06.843Z,1408588926.843 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802444, -121.787186) is outside the bounding box
2014-08-21T02:42:07.329Z,1408588927.329 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T02:42:07.336Z,1408588927.336 [DAT](INFO): no user prompt found in:+++r:1> 00800 bits/sec
2014-08-21T02:42:07.336Z,1408588927.336 [DAT](ERROR): no user prompt; deviceResponse_: 
2014-08-21T02:42:07.344Z,1408588927.344 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802444, -121.787186) is outside the bounding box
2014-08-21T02:42:07.346Z,1408588927.346 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802444, -121.787186) is outside the bounding box
2014-08-21T02:42:07.764Z,1408588927.764 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T02:42:07.783Z,1408588927.783 [DAT](INFO): no user prompt found in:+++r:1> 00800 bits/sec
2014-08-21T02:42:07.783Z,1408588927.783 [DAT](ERROR): no user prompt; deviceResponse_: 
2014-08-21T02:42:07.830Z,1408588927.830 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802444, -121.787186) is outside the bounding box
2014-08-21T02:42:07.832Z,1408588927.832 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802444, -121.787186) is outside the bounding box
2014-08-21T02:42:08.233Z,1408588928.233 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T02:42:08.240Z,1408588928.240 [DAT](INFO): no user prompt found in:
2014-08-21T02:42:08.240Z,1408588928.240 [DAT](ERROR): no user prompt; deviceResponse_: 
2014-08-21T02:42:08.247Z,1408588928.247 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802444, -121.787186) is outside the bounding box
2014-08-21T02:42:08.249Z,1408588928.249 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802444, -121.787186) is outside the bounding box
2014-08-21T02:42:08.680Z,1408588928.680 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T02:42:08.701Z,1408588928.701 [DAT](INFO): no user prompt found in:
2014-08-21T02:42:08.701Z,1408588928.701 [DAT](ERROR): no user prompt; deviceResponse_: 
2014-08-21T02:42:08.709Z,1408588928.709 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802444, -121.787186) is outside the bounding box
2014-08-21T02:42:08.711Z,1408588928.711 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802444, -121.787186) is outside the bounding box
2014-08-21T02:42:09.250Z,1408588929.250 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T02:42:09.258Z,1408588929.258 [DAT](INFO): no user prompt found in:
2014-08-21T02:42:09.258Z,1408588929.258 [DAT](ERROR): no user prompt; deviceResponse_: 
2014-08-21T02:42:09.265Z,1408588929.265 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802444, -121.787186) is outside the bounding box
2014-08-21T02:42:09.267Z,1408588929.267 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802444, -121.787186) is outside the bounding box
2014-08-21T02:42:10.135Z,1408588930.135 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T02:42:10.172Z,1408588930.172 [DAT](INFO): no user prompt found in:
2014-08-21T02:42:10.172Z,1408588930.172 [DAT](ERROR): no user prompt; deviceResponse_: 
2014-08-21T02:42:10.180Z,1408588930.180 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802444, -121.787186) is outside the bounding box
2014-08-21T02:42:10.182Z,1408588930.182 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802444, -121.787186) is outside the bounding box
2014-08-21T02:42:10.737Z,1408588930.737 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T02:42:10.754Z,1408588930.754 [DAT](INFO): no user prompt found in:
2014-08-21T02:42:10.754Z,1408588930.754 [DAT](ERROR): no user prompt; deviceResponse_: 
2014-08-21T02:42:10.762Z,1408588930.762 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802444, -121.787186) is outside the bounding box
2014-08-21T02:42:10.764Z,1408588930.764 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802444, -121.787186) is outside the bounding box
2014-08-21T02:42:11.238Z,1408588931.238 [Batt_Ocean_Server](ERROR): Battery controller B communication timeout. Re-initializing
2014-08-21T02:42:11.262Z,1408588931.262 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T02:42:11.270Z,1408588931.270 [DAT](INFO): no user prompt found in:
2014-08-21T02:42:11.270Z,1408588931.270 [DAT](ERROR): no user prompt; deviceResponse_: 
2014-08-21T02:42:11.278Z,1408588931.278 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802444, -121.787186) is outside the bounding box
2014-08-21T02:42:11.280Z,1408588931.280 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802444, -121.787186) is outside the bounding box
2014-08-21T02:42:11.775Z,1408588931.775 [Batt_Ocean_Server] Communications Fault, FailCount= 2
2014-08-21T02:42:11.775Z,1408588931.775 [Batt_Ocean_Server](ERROR): Communications Fault
2014-08-21T02:42:13.143Z,1408588933.143 [Batt_Ocean_Server](ERROR): Batt_Ocean_Server A initialization uart error: serial timeout
2014-08-21T02:42:13.143Z,1408588933.143 [Batt_Ocean_Server](ERROR): Ocean Server Batteries failed to initialize. Re-initializing
2014-08-21T02:42:13.179Z,1408588933.179 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T02:42:13.187Z,1408588933.187 [DAT](INFO): no user prompt found in:
2014-08-21T02:42:13.187Z,1408588933.187 [DAT](ERROR): no user prompt; deviceResponse_: 
2014-08-21T02:42:13.194Z,1408588933.194 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802444, -121.787186) is outside the bounding box
2014-08-21T02:42:13.196Z,1408588933.196 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802444, -121.787186) is outside the bounding box
2014-08-21T02:42:13.423Z,1408588933.423 [CBIT](ERROR): Communications Fault in component: Batt_Ocean_Server
2014-08-21T02:42:13.814Z,1408588933.814 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T02:42:13.842Z,1408588933.842 [DAT](INFO): no user prompt found in:
2014-08-21T02:42:13.842Z,1408588933.842 [DAT](ERROR): no user prompt; deviceResponse_: 
2014-08-21T02:42:13.850Z,1408588933.850 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802444, -121.787186) is outside the bounding box
2014-08-21T02:42:13.868Z,1408588933.868 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802444, -121.787186) is outside the bounding box
2014-08-21T02:42:14.173Z,1408588934.173 [CBIT](INFO): Clearing failed state for component Batt_Ocean_Server
2014-08-21T02:42:14.173Z,1408588934.173 [Batt_Ocean_Server] No Fault, FailCount= 2
2014-08-21T02:42:16.477Z,1408588936.477 [Batt_Ocean_Server](INFO): Ocean Server Batteries initialized
2014-08-21T02:42:16.516Z,1408588936.516 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T02:42:16.533Z,1408588936.533 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802444, -121.787186) is outside the bounding box
2014-08-21T02:42:16.535Z,1408588936.535 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802444, -121.787186) is outside the bounding box
2014-08-21T02:42:16.988Z,1408588936.988 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T02:42:17.004Z,1408588937.004 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802444, -121.787186) is outside the bounding box
2014-08-21T02:42:17.026Z,1408588937.026 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802444, -121.787186) is outside the bounding box
2014-08-21T02:42:17.996Z,1408588937.996 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T02:42:18.005Z,1408588938.005 [DAT](INFO): no user prompt found in:user:1> 00800 bits/sec

2014-08-21T02:42:18.005Z,1408588938.005 [DAT](ERROR): no user prompt; deviceResponse_: 
2014-08-21T02:42:18.046Z,1408588938.046 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802444, -121.787186) is outside the bounding box
2014-08-21T02:42:18.048Z,1408588938.048 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802444, -121.787186) is outside the bounding box
2014-08-21T02:42:18.466Z,1408588938.466 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T02:42:18.474Z,1408588938.474 [DAT](INFO): no user prompt found in:
2014-08-21T02:42:18.474Z,1408588938.474 [DAT](ERROR): no user prompt; deviceResponse_: 
2014-08-21T02:42:18.482Z,1408588938.482 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802444, -121.787186) is outside the bounding box
2014-08-21T02:42:18.484Z,1408588938.484 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802444, -121.787186) is outside the bounding box
2014-08-21T02:42:18.909Z,1408588938.909 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T02:42:18.925Z,1408588938.925 [DAT](INFO): no user prompt found in:
2014-08-21T02:42:18.926Z,1408588938.926 [DAT](ERROR): no user prompt; deviceResponse_: 
2014-08-21T02:42:18.933Z,1408588938.933 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802444, -121.787186) is outside the bounding box
2014-08-21T02:42:18.935Z,1408588938.935 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802444, -121.787186) is outside the bounding box
2014-08-21T02:42:19.340Z,1408588939.340 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T02:42:19.367Z,1408588939.367 [DAT](INFO): no user prompt found in:
2014-08-21T02:42:19.367Z,1408588939.367 [DAT](ERROR): no user prompt; deviceResponse_: 
2014-08-21T02:42:19.399Z,1408588939.399 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802444, -121.787186) is outside the bounding box
2014-08-21T02:42:19.401Z,1408588939.401 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802444, -121.787186) is outside the bounding box
2014-08-21T02:42:19.810Z,1408588939.810 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T02:42:19.818Z,1408588939.818 [DAT](INFO): no user prompt found in:
2014-08-21T02:42:19.818Z,1408588939.818 [DAT](ERROR): no user prompt; deviceResponse_: 
2014-08-21T02:42:19.826Z,1408588939.826 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802444, -121.787186) is outside the bounding box
2014-08-21T02:42:19.828Z,1408588939.828 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802444, -121.787186) is outside the bounding box
2014-08-21T02:42:20.259Z,1408588940.259 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T02:42:20.266Z,1408588940.266 [DAT](INFO): no user prompt found in:
2014-08-21T02:42:20.266Z,1408588940.266 [DAT](ERROR): no user prompt; deviceResponse_: 
2014-08-21T02:42:20.274Z,1408588940.274 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802444, -121.787186) is outside the bounding box
2014-08-21T02:42:20.276Z,1408588940.276 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802444, -121.787186) is outside the bounding box
2014-08-21T02:42:20.295Z,1408588940.295 [SBIT](IMPORTANT): SBIT PASSED
2014-08-21T02:42:20.700Z,1408588940.700 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T02:42:20.719Z,1408588940.719 [DAT](INFO): no user prompt found in:
2014-08-21T02:42:20.719Z,1408588940.719 [DAT](ERROR): no user prompt; deviceResponse_: 
2014-08-21T02:42:20.726Z,1408588940.726 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802444, -121.787186) is outside the bounding box
2014-08-21T02:42:20.728Z,1408588940.728 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802444, -121.787186) is outside the bounding box
2014-08-21T02:42:20.741Z,1408588940.741 [MissionManager](IMPORTANT): Started mission Startup
2014-08-21T02:42:20.742Z,1408588940.742 [Startup] Running Loop=1
2014-08-21T02:42:20.742Z,1408588940.742 [Startup](INFO): Aggregate::initialize Startup
2014-08-21T02:42:20.742Z,1408588940.742 [Startup:A.GoToSurface] Running Loop=1
2014-08-21T02:42:20.742Z,1408588940.742 [Startup:A.GoToSurface](DEBUG): Initialize GoToSurfaceComponent.
2014-08-21T02:42:20.743Z,1408588940.743 [Startup:A.GoToSurface](DEBUG): No depth rate setting specified. Using default value of nan m/s.
2014-08-21T02:42:20.743Z,1408588940.743 [Startup:A.GoToSurface](DEBUG): No pitch setting specified. Using default value of nan degrees.
2014-08-21T02:42:20.743Z,1408588940.743 [Startup:A.GoToSurface](DEBUG): No speed setting specified. Using default value of 0.500000 m/s.
2014-08-21T02:42:20.750Z,1408588940.750 [Startup:StartupSatComms] Running Loop=1
2014-08-21T02:42:20.750Z,1408588940.750 [Startup:StartupSatComms](INFO): Aggregate::initialize Startup:StartupSatComms
2014-08-21T02:42:20.750Z,1408588940.750 [Startup:StartupSatComms:A] Running Loop=1
2014-08-21T02:42:21.213Z,1408588941.213 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T02:42:21.231Z,1408588941.231 [DAT](FAULT): failed to initialize; deviceResponse_:
2014-08-21T02:42:21.231Z,1408588941.231 [DAT] Communications Fault, FailCount= 3
2014-08-21T02:42:21.231Z,1408588941.231 [DAT](ERROR): Communications Fault
2014-08-21T02:42:21.239Z,1408588941.239 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802444, -121.787186) is outside the bounding box
2014-08-21T02:42:21.241Z,1408588941.241 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802444, -121.787186) is outside the bounding box
2014-08-21T02:42:21.255Z,1408588941.255 [Startup:StartupSatComms:A](DEBUG): Initialize ReadDataComponent to sense latitude_fix
2014-08-21T02:42:21.300Z,1408588941.300 [CBIT](ERROR): Communications Fault in component: DAT
2014-08-21T02:42:21.715Z,1408588941.715 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T02:42:21.715Z,1408588941.715 [NAL9602](INFO): Powering up
2014-08-21T02:42:21.721Z,1408588941.721 [DAT](INFO): Powering down
2014-08-21T02:42:21.843Z,1408588941.843 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802444, -121.787186) is outside the bounding box
2014-08-21T02:42:21.845Z,1408588941.845 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802444, -121.787186) is outside the bounding box
2014-08-21T02:42:22.258Z,1408588942.258 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T02:42:22.289Z,1408588942.289 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802444, -121.787186) is outside the bounding box
2014-08-21T02:42:22.291Z,1408588942.291 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802444, -121.787186) is outside the bounding box
2014-08-21T02:42:23.089Z,1408588943.089 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T02:42:23.121Z,1408588943.121 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802444, -121.787186) is outside the bounding box
2014-08-21T02:42:23.123Z,1408588943.123 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802444, -121.787186) is outside the bounding box
2014-08-21T02:42:23.222Z,1408588943.222 [CBIT](INFO): Clearing failed state for component DAT
2014-08-21T02:42:23.222Z,1408588943.222 [DAT] No Fault, FailCount= 3
2014-08-21T02:42:23.593Z,1408588943.593 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T02:42:23.606Z,1408588943.606 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802444, -121.787186) is outside the bounding box
2014-08-21T02:42:23.609Z,1408588943.609 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802444, -121.787186) is outside the bounding box
2014-08-21T02:42:24.029Z,1408588944.029 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T02:42:24.050Z,1408588944.050 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802444, -121.787186) is outside the bounding box
2014-08-21T02:42:24.057Z,1408588944.057 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802444, -121.787186) is outside the bounding box
2014-08-21T02:42:24.486Z,1408588944.486 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T02:42:24.514Z,1408588944.514 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802444, -121.787186) is outside the bounding box
2014-08-21T02:42:24.516Z,1408588944.516 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802444, -121.787186) is outside the bounding box
2014-08-21T02:42:24.934Z,1408588944.934 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T02:42:24.941Z,1408588944.941 [DAT](INFO): Powering up
2014-08-21T02:42:24.964Z,1408588944.964 [DAT](DEBUG): Initializing DAT.
2014-08-21T02:42:24.991Z,1408588944.991 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802444, -121.787186) is outside the bounding box
2014-08-21T02:42:25.004Z,1408588945.004 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802444, -121.787186) is outside the bounding box
2014-08-21T02:42:25.411Z,1408588945.411 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T02:42:25.419Z,1408588945.419 [DAT](INFO): no user prompt found in:
2014-08-21T02:42:25.419Z,1408588945.419 [DAT](ERROR): no user prompt; deviceResponse_: 
2014-08-21T02:42:25.426Z,1408588945.426 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802444, -121.787186) is outside the bounding box
2014-08-21T02:42:25.428Z,1408588945.428 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802444, -121.787186) is outside the bounding box
2014-08-21T02:42:25.917Z,1408588945.917 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T02:42:25.924Z,1408588945.924 [DAT](INFO): no user prompt found in:
2014-08-21T02:42:25.925Z,1408588945.925 [DAT](ERROR): no user prompt; deviceResponse_: 
2014-08-21T02:42:25.932Z,1408588945.932 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802444, -121.787186) is outside the bounding box
2014-08-21T02:42:25.934Z,1408588945.934 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802444, -121.787186) is outside the bounding box
2014-08-21T02:42:26.389Z,1408588946.389 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T02:42:26.435Z,1408588946.435 [DAT](INFO): no user prompt found in:
2014-08-21T02:42:26.435Z,1408588946.435 [DAT](ERROR): no user prompt; deviceResponse_: 
2014-08-21T02:42:26.443Z,1408588946.443 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802444, -121.787186) is outside the bounding box
2014-08-21T02:42:26.445Z,1408588946.445 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802444, -121.787186) is outside the bounding box
2014-08-21T02:42:26.978Z,1408588946.978 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T02:42:26.988Z,1408588946.988 [DAT](INFO): no user prompt found in:
2014-08-21T02:42:26.989Z,1408588946.989 [DAT](ERROR): no user prompt; deviceResponse_: 
2014-08-21T02:42:26.996Z,1408588946.996 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802444, -121.787186) is outside the bounding box
2014-08-21T02:42:26.998Z,1408588946.998 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802444, -121.787186) is outside the bounding box
2014-08-21T02:42:27.454Z,1408588947.454 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T02:42:27.462Z,1408588947.462 [DAT](INFO): no user prompt found in:
2014-08-21T02:42:27.462Z,1408588947.462 [DAT](ERROR): no user prompt; deviceResponse_: 
2014-08-21T02:42:27.500Z,1408588947.500 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802444, -121.787186) is outside the bounding box
2014-08-21T02:42:27.502Z,1408588947.502 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802444, -121.787186) is outside the bounding box
2014-08-21T02:42:28.092Z,1408588948.092 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T02:42:28.104Z,1408588948.104 [DAT](INFO): no user prompt found in:
2014-08-21T02:42:28.104Z,1408588948.104 [DAT](ERROR): no user prompt; deviceResponse_: 
2014-08-21T02:42:28.111Z,1408588948.111 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802444, -121.787186) is outside the bounding box
2014-08-21T02:42:28.113Z,1408588948.113 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802444, -121.787186) is outside the bounding box
2014-08-21T02:42:28.552Z,1408588948.552 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T02:42:28.560Z,1408588948.560 [DAT](INFO): no user prompt found in:
2014-08-21T02:42:28.560Z,1408588948.560 [DAT](ERROR): no user prompt; deviceResponse_: 
2014-08-21T02:42:28.567Z,1408588948.567 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802444, -121.787186) is outside the bounding box
2014-08-21T02:42:28.569Z,1408588948.569 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802444, -121.787186) is outside the bounding box
2014-08-21T02:42:28.996Z,1408588948.996 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T02:42:29.004Z,1408588949.004 [DAT](INFO): no user prompt found in:
2014-08-21T02:42:29.004Z,1408588949.004 [DAT](ERROR): no user prompt; deviceResponse_: 
2014-08-21T02:42:29.011Z,1408588949.011 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802444, -121.787186) is outside the bounding box
2014-08-21T02:42:29.013Z,1408588949.013 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802444, -121.787186) is outside the bounding box
2014-08-21T02:42:29.446Z,1408588949.446 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T02:42:29.454Z,1408588949.454 [DAT](INFO): no user prompt found in:+++r:1> 00800 bits/sec

2014-08-21T02:42:29.454Z,1408588949.454 [DAT](ERROR): no user prompt; deviceResponse_: 
2014-08-21T02:42:29.462Z,1408588949.462 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802444, -121.787186) is outside the bounding box
2014-08-21T02:42:29.464Z,1408588949.464 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802444, -121.787186) is outside the bounding box
2014-08-21T02:42:29.915Z,1408588949.915 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T02:42:29.943Z,1408588949.943 [DAT](INFO): no user prompt found in:+++r:1> 00800 bits/sec

2014-08-21T02:42:29.943Z,1408588949.943 [DAT](ERROR): no user prompt; deviceResponse_: 
2014-08-21T02:42:29.951Z,1408588949.951 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802444, -121.787186) is outside the bounding box
2014-08-21T02:42:29.954Z,1408588949.954 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802444, -121.787186) is outside the bounding box
2014-08-21T02:42:30.399Z,1408588950.399 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T02:42:30.406Z,1408588950.406 [DAT](INFO): no user prompt found in:+++r:1> 00800 bits/sec

2014-08-21T02:42:30.406Z,1408588950.406 [DAT](ERROR): no user prompt; deviceResponse_: 
2014-08-21T02:42:30.413Z,1408588950.413 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802444, -121.787186) is outside the bounding box
2014-08-21T02:42:30.415Z,1408588950.415 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802444, -121.787186) is outside the bounding box
2014-08-21T02:42:30.893Z,1408588950.893 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T02:42:30.902Z,1408588950.902 [DAT](INFO): no user prompt found in:
2014-08-21T02:42:30.902Z,1408588950.902 [DAT](ERROR): no user prompt; deviceResponse_: 
2014-08-21T02:42:30.909Z,1408588950.909 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802444, -121.787186) is outside the bounding box
2014-08-21T02:42:30.911Z,1408588950.911 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802444, -121.787186) is outside the bounding box
2014-08-21T02:42:31.354Z,1408588951.354 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T02:42:31.361Z,1408588951.361 [DAT](INFO): no user prompt found in:
2014-08-21T02:42:31.361Z,1408588951.361 [DAT](ERROR): no user prompt; deviceResponse_: 
2014-08-21T02:42:31.369Z,1408588951.369 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802444, -121.787186) is outside the bounding box
2014-08-21T02:42:31.372Z,1408588951.372 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802444, -121.787186) is outside the bounding box
2014-08-21T02:42:31.785Z,1408588951.785 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T02:42:31.793Z,1408588951.793 [DAT](INFO): no user prompt found in:
2014-08-21T02:42:31.793Z,1408588951.793 [DAT](ERROR): no user prompt; deviceResponse_: 
2014-08-21T02:42:31.800Z,1408588951.800 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802444, -121.787186) is outside the bounding box
2014-08-21T02:42:31.802Z,1408588951.802 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802444, -121.787186) is outside the bounding box
2014-08-21T02:42:32.299Z,1408588952.299 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T02:42:32.349Z,1408588952.349 [NAL9602](INFO): NAL9602 initialized
2014-08-21T02:42:32.374Z,1408588952.374 [DAT](INFO): no user prompt found in:
2014-08-21T02:42:32.375Z,1408588952.375 [DAT](ERROR): no user prompt; deviceResponse_: 
2014-08-21T02:42:32.383Z,1408588952.383 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802444, -121.787186) is outside the bounding box
2014-08-21T02:42:32.385Z,1408588952.385 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802444, -121.787186) is outside the bounding box
2014-08-21T02:42:32.791Z,1408588952.791 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T02:42:32.798Z,1408588952.798 [DAT](INFO): no user prompt found in:
2014-08-21T02:42:32.799Z,1408588952.799 [DAT](ERROR): no user prompt; deviceResponse_: 
2014-08-21T02:42:32.806Z,1408588952.806 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802444, -121.787186) is outside the bounding box
2014-08-21T02:42:32.808Z,1408588952.808 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802444, -121.787186) is outside the bounding box
2014-08-21T02:42:33.372Z,1408588953.372 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T02:42:33.458Z,1408588953.458 [DAT](INFO): no user prompt found in:
2014-08-21T02:42:33.458Z,1408588953.458 [DAT](ERROR): no user prompt; deviceResponse_: 
2014-08-21T02:42:33.498Z,1408588953.498 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802444, -121.787186) is outside the bounding box
2014-08-21T02:42:33.504Z,1408588953.504 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802444, -121.787186) is outside the bounding box
2014-08-21T02:42:33.888Z,1408588953.888 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T02:42:33.924Z,1408588953.924 [DAT](INFO): no user prompt found in:
2014-08-21T02:42:33.924Z,1408588953.924 [DAT](ERROR): no user prompt; deviceResponse_: 
2014-08-21T02:42:33.932Z,1408588953.932 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802444, -121.787186) is outside the bounding box
2014-08-21T02:42:33.934Z,1408588953.934 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802444, -121.787186) is outside the bounding box
2014-08-21T02:42:34.345Z,1408588954.345 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T02:42:34.381Z,1408588954.381 [DAT](INFO): no user prompt found in:
2014-08-21T02:42:34.381Z,1408588954.381 [DAT](ERROR): no user prompt; deviceResponse_: 
2014-08-21T02:42:34.388Z,1408588954.388 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802444, -121.787186) is outside the bounding box
2014-08-21T02:42:34.390Z,1408588954.390 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802444, -121.787186) is outside the bounding box
2014-08-21T02:42:34.806Z,1408588954.806 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T02:42:34.814Z,1408588954.814 [DAT](INFO): no user prompt found in:
2014-08-21T02:42:34.814Z,1408588954.814 [DAT](ERROR): no user prompt; deviceResponse_: 
2014-08-21T02:42:34.822Z,1408588954.822 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802444, -121.787186) is outside the bounding box
2014-08-21T02:42:34.823Z,1408588954.823 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802444, -121.787186) is outside the bounding box
2014-08-21T02:42:35.254Z,1408588955.254 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T02:42:35.261Z,1408588955.261 [DAT](INFO): no user prompt found in:
2014-08-21T02:42:35.262Z,1408588955.262 [DAT](ERROR): no user prompt; deviceResponse_: 
2014-08-21T02:42:35.269Z,1408588955.269 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802444, -121.787186) is outside the bounding box
2014-08-21T02:42:35.271Z,1408588955.271 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802444, -121.787186) is outside the bounding box
2014-08-21T02:42:35.692Z,1408588955.692 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T02:42:35.714Z,1408588955.714 [DAT](INFO): no user prompt found in:
2014-08-21T02:42:35.714Z,1408588955.714 [DAT](ERROR): no user prompt; deviceResponse_: 
2014-08-21T02:42:35.722Z,1408588955.722 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802444, -121.787186) is outside the bounding box
2014-08-21T02:42:35.724Z,1408588955.724 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802444, -121.787186) is outside the bounding box
2014-08-21T02:42:36.185Z,1408588956.185 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T02:42:36.206Z,1408588956.206 [DAT](INFO): no user prompt found in:
2014-08-21T02:42:36.207Z,1408588956.207 [DAT](ERROR): no user prompt; deviceResponse_: 
2014-08-21T02:42:36.214Z,1408588956.214 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802444, -121.787186) is outside the bounding box
2014-08-21T02:42:36.216Z,1408588956.216 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802444, -121.787186) is outside the bounding box
2014-08-21T02:42:36.636Z,1408588956.636 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T02:42:36.715Z,1408588956.715 [DAT](INFO): no user prompt found in:
2014-08-21T02:42:36.715Z,1408588956.715 [DAT](ERROR): no user prompt; deviceResponse_: 
2014-08-21T02:42:36.731Z,1408588956.731 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802444, -121.787186) is outside the bounding box
2014-08-21T02:42:36.733Z,1408588956.733 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802444, -121.787186) is outside the bounding box
2014-08-21T02:42:37.234Z,1408588957.234 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T02:42:37.260Z,1408588957.260 [DAT](INFO): no user prompt found in:
2014-08-21T02:42:37.260Z,1408588957.260 [DAT](ERROR): no user prompt; deviceResponse_: 
2014-08-21T02:42:37.315Z,1408588957.315 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802444, -121.787186) is outside the bounding box
2014-08-21T02:42:37.318Z,1408588957.318 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802444, -121.787186) is outside the bounding box
2014-08-21T02:42:37.732Z,1408588957.732 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T02:42:37.766Z,1408588957.766 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802444, -121.787186) is outside the bounding box
2014-08-21T02:42:37.768Z,1408588957.768 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802444, -121.787186) is outside the bounding box
2014-08-21T02:42:38.187Z,1408588958.187 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T02:42:38.204Z,1408588958.204 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802444, -121.787186) is outside the bounding box
2014-08-21T02:42:38.206Z,1408588958.206 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802444, -121.787186) is outside the bounding box
2014-08-21T02:42:38.628Z,1408588958.628 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T02:42:38.653Z,1408588958.653 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802444, -121.787186) is outside the bounding box
2014-08-21T02:42:38.655Z,1408588958.655 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802444, -121.787186) is outside the bounding box
2014-08-21T02:42:39.060Z,1408588959.060 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T02:42:39.068Z,1408588959.068 [DAT](INFO): no user prompt found in:
2014-08-21T02:42:39.068Z,1408588959.068 [DAT](ERROR): no user prompt; deviceResponse_: 
2014-08-21T02:42:39.076Z,1408588959.076 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802444, -121.787186) is outside the bounding box
2014-08-21T02:42:39.078Z,1408588959.078 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802444, -121.787186) is outside the bounding box
2014-08-21T02:42:39.509Z,1408588959.509 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T02:42:39.554Z,1408588959.554 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802444, -121.787186) is outside the bounding box
2014-08-21T02:42:39.556Z,1408588959.556 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802444, -121.787186) is outside the bounding box
2014-08-21T02:42:39.950Z,1408588959.950 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T02:42:40.038Z,1408588960.038 [DAT](INFO): no user prompt found in:user:1> 00800 bits/sec
2014-08-21T02:42:40.038Z,1408588960.038 [DAT](ERROR): no user prompt; deviceResponse_: 
2014-08-21T02:42:40.053Z,1408588960.053 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802444, -121.787186) is outside the bounding box
2014-08-21T02:42:40.055Z,1408588960.055 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802444, -121.787186) is outside the bounding box
2014-08-21T02:42:40.462Z,1408588960.462 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T02:42:40.486Z,1408588960.486 [DAT](INFO): no user prompt found in:
2014-08-21T02:42:40.486Z,1408588960.486 [DAT](ERROR): no user prompt; deviceResponse_: 
2014-08-21T02:42:40.499Z,1408588960.499 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802444, -121.787186) is outside the bounding box
2014-08-21T02:42:40.534Z,1408588960.534 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802444, -121.787186) is outside the bounding box
2014-08-21T02:42:40.969Z,1408588960.969 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T02:42:40.976Z,1408588960.976 [DAT](INFO): no user prompt found in:
2014-08-21T02:42:40.977Z,1408588960.977 [DAT](ERROR): no user prompt; deviceResponse_: 
2014-08-21T02:42:40.984Z,1408588960.984 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802444, -121.787186) is outside the bounding box
2014-08-21T02:42:40.986Z,1408588960.986 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802444, -121.787186) is outside the bounding box
2014-08-21T02:42:41.415Z,1408588961.415 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T02:42:41.436Z,1408588961.436 [DAT](INFO): no user prompt found in:
2014-08-21T02:42:41.436Z,1408588961.436 [DAT](ERROR): no user prompt; deviceResponse_: 
2014-08-21T02:42:41.444Z,1408588961.444 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802444, -121.787186) is outside the bounding box
2014-08-21T02:42:41.446Z,1408588961.446 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802444, -121.787186) is outside the bounding box
2014-08-21T02:42:41.864Z,1408588961.864 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T02:42:41.886Z,1408588961.886 [DAT](INFO): no user prompt found in:
2014-08-21T02:42:41.886Z,1408588961.886 [DAT](ERROR): no user prompt; deviceResponse_: 
2014-08-21T02:42:41.894Z,1408588961.894 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802444, -121.787186) is outside the bounding box
2014-08-21T02:42:41.896Z,1408588961.896 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802444, -121.787186) is outside the bounding box
2014-08-21T02:42:42.367Z,1408588962.367 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T02:42:42.374Z,1408588962.374 [DAT](INFO): no user prompt found in:
2014-08-21T02:42:42.375Z,1408588962.375 [DAT](ERROR): no user prompt; deviceResponse_: 
2014-08-21T02:42:42.427Z,1408588962.427 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802444, -121.787186) is outside the bounding box
2014-08-21T02:42:42.433Z,1408588962.433 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802444, -121.787186) is outside the bounding box
2014-08-21T02:42:42.818Z,1408588962.818 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T02:42:42.849Z,1408588962.849 [DAT](INFO): no user prompt found in:
2014-08-21T02:42:42.849Z,1408588962.849 [DAT](ERROR): no user prompt; deviceResponse_: 
2014-08-21T02:42:42.857Z,1408588962.857 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802444, -121.787186) is outside the bounding box
2014-08-21T02:42:42.859Z,1408588962.859 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802444, -121.787186) is outside the bounding box
2014-08-21T02:42:43.287Z,1408588963.287 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T02:42:43.328Z,1408588963.328 [DAT](INFO): no user prompt found in:
2014-08-21T02:42:43.328Z,1408588963.328 [DAT](ERROR): no user prompt; deviceResponse_: 
2014-08-21T02:42:43.368Z,1408588963.368 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802444, -121.787186) is outside the bounding box
2014-08-21T02:42:43.370Z,1408588963.370 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802444, -121.787186) is outside the bounding box
2014-08-21T02:42:43.780Z,1408588963.780 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T02:42:43.801Z,1408588963.801 [DAT](INFO): no user prompt found in:
2014-08-21T02:42:43.801Z,1408588963.801 [DAT](ERROR): no user prompt; deviceResponse_: 
2014-08-21T02:42:43.809Z,1408588963.809 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802444, -121.787186) is outside the bounding box
2014-08-21T02:42:43.852Z,1408588963.852 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802444, -121.787186) is outside the bounding box
2014-08-21T02:42:44.224Z,1408588964.224 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T02:42:44.231Z,1408588964.231 [DAT](FAULT): failed to initialize; deviceResponse_:
2014-08-21T02:42:44.231Z,1408588964.231 [DAT] Communications Fault, FailCount= 4
2014-08-21T02:42:44.231Z,1408588964.231 [DAT](ERROR): Communications Fault
2014-08-21T02:42:44.238Z,1408588964.238 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802444, -121.787186) is outside the bounding box
2014-08-21T02:42:44.241Z,1408588964.241 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802444, -121.787186) is outside the bounding box
2014-08-21T02:42:44.304Z,1408588964.304 [CBIT](ERROR): Communications Fault in component: DAT
2014-08-21T02:42:44.665Z,1408588964.665 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T02:42:44.685Z,1408588964.685 [DAT](INFO): Powering down
2014-08-21T02:42:44.818Z,1408588964.818 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802444, -121.787186) is outside the bounding box
2014-08-21T02:42:44.829Z,1408588964.829 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802444, -121.787186) is outside the bounding box
2014-08-21T02:42:45.234Z,1408588965.234 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T02:42:45.248Z,1408588965.248 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802444, -121.787186) is outside the bounding box
2014-08-21T02:42:45.250Z,1408588965.250 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802444, -121.787186) is outside the bounding box
2014-08-21T02:42:45.666Z,1408588965.666 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T02:42:45.701Z,1408588965.701 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802444, -121.787186) is outside the bounding box
2014-08-21T02:42:45.703Z,1408588965.703 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802444, -121.787186) is outside the bounding box
2014-08-21T02:42:45.748Z,1408588965.748 [CBIT](INFO): Clearing failed state for component DAT
2014-08-21T02:42:45.748Z,1408588965.748 [DAT] No Fault, FailCount= 4
2014-08-21T02:42:46.156Z,1408588966.156 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T02:42:46.199Z,1408588966.199 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802444, -121.787186) is outside the bounding box
2014-08-21T02:42:46.201Z,1408588966.201 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802444, -121.787186) is outside the bounding box
2014-08-21T02:42:46.600Z,1408588966.600 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T02:42:46.661Z,1408588966.661 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802444, -121.787186) is outside the bounding box
2014-08-21T02:42:46.671Z,1408588966.671 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802444, -121.787186) is outside the bounding box
2014-08-21T02:42:47.069Z,1408588967.069 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T02:42:47.082Z,1408588967.082 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802444, -121.787186) is outside the bounding box
2014-08-21T02:42:47.085Z,1408588967.085 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802444, -121.787186) is outside the bounding box
2014-08-21T02:42:47.559Z,1408588967.559 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T02:42:47.575Z,1408588967.575 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802444, -121.787186) is outside the bounding box
2014-08-21T02:42:47.577Z,1408588967.577 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802444, -121.787186) is outside the bounding box
2014-08-21T02:42:47.970Z,1408588967.970 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T02:42:47.977Z,1408588967.977 [DAT](INFO): Powering up
2014-08-21T02:42:47.977Z,1408588967.977 [DAT](DEBUG): Initializing DAT.
2014-08-21T02:42:48.028Z,1408588968.028 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802444, -121.787186) is outside the bounding box
2014-08-21T02:42:48.030Z,1408588968.030 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802444, -121.787186) is outside the bounding box
2014-08-21T02:42:48.418Z,1408588968.418 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T02:42:48.457Z,1408588968.457 [DAT](INFO): no user prompt found in:
2014-08-21T02:42:48.457Z,1408588968.457 [DAT](ERROR): no user prompt; deviceResponse_: 
2014-08-21T02:42:48.464Z,1408588968.464 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802444, -121.787186) is outside the bounding box
2014-08-21T02:42:48.467Z,1408588968.467 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802444, -121.787186) is outside the bounding box
2014-08-21T02:42:48.879Z,1408588968.879 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T02:42:48.919Z,1408588968.919 [DAT](INFO): no user prompt found in:
2014-08-21T02:42:48.919Z,1408588968.919 [DAT](ERROR): no user prompt; deviceResponse_: 
2014-08-21T02:42:48.926Z,1408588968.926 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802444, -121.787186) is outside the bounding box
2014-08-21T02:42:48.928Z,1408588968.928 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802444, -121.787186) is outside the bounding box
2014-08-21T02:42:49.357Z,1408588969.357 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T02:42:49.378Z,1408588969.378 [DAT](INFO): no user prompt found in:
2014-08-21T02:42:49.379Z,1408588969.379 [DAT](ERROR): no user prompt; deviceResponse_: 
2014-08-21T02:42:49.386Z,1408588969.386 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802444, -121.787186) is outside the bounding box
2014-08-21T02:42:49.388Z,1408588969.388 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802444, -121.787186) is outside the bounding box
2014-08-21T02:42:49.812Z,1408588969.812 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T02:42:49.861Z,1408588969.861 [DAT](INFO): no user prompt found in:
2014-08-21T02:42:49.861Z,1408588969.861 [DAT](ERROR): no user prompt; deviceResponse_: 
2014-08-21T02:42:49.876Z,1408588969.876 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802444, -121.787186) is outside the bounding box
2014-08-21T02:42:49.878Z,1408588969.878 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802444, -121.787186) is outside the bounding box
2014-08-21T02:42:50.306Z,1408588970.306 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T02:42:50.313Z,1408588970.313 [DAT](INFO): no user prompt found in:
2014-08-21T02:42:50.313Z,1408588970.313 [DAT](ERROR): no user prompt; deviceResponse_: 
2014-08-21T02:42:50.321Z,1408588970.321 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802444, -121.787186) is outside the bounding box
2014-08-21T02:42:50.323Z,1408588970.323 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802444, -121.787186) is outside the bounding box
2014-08-21T02:42:50.795Z,1408588970.795 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T02:42:50.805Z,1408588970.805 [DAT](INFO): no user prompt found in:
2014-08-21T02:42:50.805Z,1408588970.805 [DAT](ERROR): no user prompt; deviceResponse_: 
2014-08-21T02:42:50.813Z,1408588970.813 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802444, -121.787186) is outside the bounding box
2014-08-21T02:42:50.815Z,1408588970.815 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802444, -121.787186) is outside the bounding box
2014-08-21T02:42:51.260Z,1408588971.260 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T02:42:51.268Z,1408588971.268 [DAT](INFO): no user prompt found in:
2014-08-21T02:42:51.268Z,1408588971.268 [DAT](ERROR): no user prompt; deviceResponse_: 
2014-08-21T02:42:51.275Z,1408588971.275 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802444, -121.787186) is outside the bounding box
2014-08-21T02:42:51.277Z,1408588971.277 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802444, -121.787186) is outside the bounding box
2014-08-21T02:42:51.694Z,1408588971.694 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T02:42:51.727Z,1408588971.727 [DAT](INFO): no user prompt found in:
2014-08-21T02:42:51.727Z,1408588971.727 [DAT](ERROR): no user prompt; deviceResponse_: 
2014-08-21T02:42:51.734Z,1408588971.734 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802444, -121.787186) is outside the bounding box
2014-08-21T02:42:51.737Z,1408588971.737 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802444, -121.787186) is outside the bounding box
2014-08-21T02:42:52.157Z,1408588972.157 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T02:42:52.195Z,1408588972.195 [DAT](INFO): no user prompt found in:
2014-08-21T02:42:52.195Z,1408588972.195 [DAT](ERROR): no user prompt; deviceResponse_: 
2014-08-21T02:42:52.203Z,1408588972.203 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802444, -121.787186) is outside the bounding box
2014-08-21T02:42:52.205Z,1408588972.205 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802444, -121.787186) is outside the bounding box
2014-08-21T02:42:52.695Z,1408588972.695 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T02:42:52.720Z,1408588972.720 [DAT](INFO): no user prompt found in:+++r:1> 00800 bits/sec
2014-08-21T02:42:52.721Z,1408588972.721 [DAT](ERROR): no user prompt; deviceResponse_: 
2014-08-21T02:42:52.764Z,1408588972.764 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802444, -121.787186) is outside the bounding box
2014-08-21T02:42:52.766Z,1408588972.766 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802444, -121.787186) is outside the bounding box
2014-08-21T02:42:53.166Z,1408588973.166 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T02:42:53.221Z,1408588973.221 [DAT](INFO): no user prompt found in:+++r:1> 00800 bits/sec
2014-08-21T02:42:53.221Z,1408588973.221 [DAT](ERROR): no user prompt; deviceResponse_: 
2014-08-21T02:42:53.228Z,1408588973.228 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802444, -121.787186) is outside the bounding box
2014-08-21T02:42:53.235Z,1408588973.235 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802444, -121.787186) is outside the bounding box
2014-08-21T02:42:53.691Z,1408588973.691 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T02:42:53.715Z,1408588973.715 [DAT](INFO): no user prompt found in:+++r:1> 00800 bits/sec
2014-08-21T02:42:53.716Z,1408588973.716 [DAT](ERROR): no user prompt; deviceResponse_: 
2014-08-21T02:42:53.723Z,1408588973.723 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802444, -121.787186) is outside the bounding box
2014-08-21T02:42:53.725Z,1408588973.725 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802444, -121.787186) is outside the bounding box
2014-08-21T02:42:54.148Z,1408588974.148 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T02:42:54.166Z,1408588974.166 [DAT](INFO): no user prompt found in:
2014-08-21T02:42:54.167Z,1408588974.167 [DAT](ERROR): no user prompt; deviceResponse_: 
2014-08-21T02:42:54.174Z,1408588974.174 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802444, -121.787186) is outside the bounding box
2014-08-21T02:42:54.176Z,1408588974.176 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802444, -121.787186) is outside the bounding box
2014-08-21T02:42:54.589Z,1408588974.589 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T02:42:54.620Z,1408588974.620 [DAT](INFO): no user prompt found in:
2014-08-21T02:42:54.620Z,1408588974.620 [DAT](ERROR): no user prompt; deviceResponse_: 
2014-08-21T02:42:54.627Z,1408588974.627 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802444, -121.787186) is outside the bounding box
2014-08-21T02:42:54.629Z,1408588974.629 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802444, -121.787186) is outside the bounding box
2014-08-21T02:42:55.033Z,1408588975.033 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T02:42:55.072Z,1408588975.072 [DAT](INFO): no user prompt found in:
2014-08-21T02:42:55.072Z,1408588975.072 [DAT](ERROR): no user prompt; deviceResponse_: 
2014-08-21T02:42:55.079Z,1408588975.079 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802444, -121.787186) is outside the bounding box
2014-08-21T02:42:55.082Z,1408588975.082 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802444, -121.787186) is outside the bounding box
2014-08-21T02:42:55.490Z,1408588975.490 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T02:42:55.525Z,1408588975.525 [DAT](INFO): no user prompt found in:
2014-08-21T02:42:55.526Z,1408588975.526 [DAT](ERROR): no user prompt; deviceResponse_: 
2014-08-21T02:42:55.533Z,1408588975.533 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802444, -121.787186) is outside the bounding box
2014-08-21T02:42:55.535Z,1408588975.535 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802444, -121.787186) is outside the bounding box
2014-08-21T02:42:55.978Z,1408588975.978 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T02:42:55.986Z,1408588975.986 [DAT](INFO): no user prompt found in:
2014-08-21T02:42:55.986Z,1408588975.986 [DAT](ERROR): no user prompt; deviceResponse_: 
2014-08-21T02:42:55.993Z,1408588975.993 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802444, -121.787186) is outside the bounding box
2014-08-21T02:42:55.995Z,1408588975.995 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802444, -121.787186) is outside the bounding box
2014-08-21T02:42:56.419Z,1408588976.419 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T02:42:56.455Z,1408588976.455 [DAT](INFO): no user prompt found in:
2014-08-21T02:42:56.455Z,1408588976.455 [DAT](ERROR): no user prompt; deviceResponse_: 
2014-08-21T02:42:56.463Z,1408588976.463 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802444, -121.787186) is outside the bounding box
2014-08-21T02:42:56.465Z,1408588976.465 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802444, -121.787186) is outside the bounding box
2014-08-21T02:42:56.894Z,1408588976.894 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T02:42:56.904Z,1408588976.904 [DAT](INFO): no user prompt found in:
2014-08-21T02:42:56.905Z,1408588976.905 [DAT](ERROR): no user prompt; deviceResponse_: 
2014-08-21T02:42:56.912Z,1408588976.912 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802444, -121.787186) is outside the bounding box
2014-08-21T02:42:56.914Z,1408588976.914 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802444, -121.787186) is outside the bounding box
2014-08-21T02:42:57.348Z,1408588977.348 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T02:42:57.356Z,1408588977.356 [DAT](INFO): no user prompt found in:
2014-08-21T02:42:57.357Z,1408588977.357 [DAT](ERROR): no user prompt; deviceResponse_: 
2014-08-21T02:42:57.364Z,1408588977.364 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802444, -121.787186) is outside the bounding box
2014-08-21T02:42:57.366Z,1408588977.366 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802444, -121.787186) is outside the bounding box
2014-08-21T02:42:57.867Z,1408588977.867 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T02:42:57.900Z,1408588977.900 [DAT](INFO): no user prompt found in:
2014-08-21T02:42:57.901Z,1408588977.901 [DAT](ERROR): no user prompt; deviceResponse_: 
2014-08-21T02:42:57.909Z,1408588977.909 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802444, -121.787186) is outside the bounding box
2014-08-21T02:42:57.911Z,1408588977.911 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802444, -121.787186) is outside the bounding box
2014-08-21T02:42:58.326Z,1408588978.326 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T02:42:58.365Z,1408588978.365 [DAT](INFO): no user prompt found in:
2014-08-21T02:42:58.365Z,1408588978.365 [DAT](ERROR): no user prompt; deviceResponse_: 
2014-08-21T02:42:58.373Z,1408588978.373 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802444, -121.787186) is outside the bounding box
2014-08-21T02:42:58.375Z,1408588978.375 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802444, -121.787186) is outside the bounding box
2014-08-21T02:42:58.795Z,1408588978.795 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T02:42:58.826Z,1408588978.826 [DAT](INFO): no user prompt found in:
2014-08-21T02:42:58.826Z,1408588978.826 [DAT](ERROR): no user prompt; deviceResponse_: 
2014-08-21T02:42:58.833Z,1408588978.833 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802444, -121.787186) is outside the bounding box
2014-08-21T02:42:58.835Z,1408588978.835 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802444, -121.787186) is outside the bounding box
2014-08-21T02:42:59.260Z,1408588979.260 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T02:42:59.276Z,1408588979.276 [DAT](INFO): no user prompt found in:
2014-08-21T02:42:59.277Z,1408588979.277 [DAT](ERROR): no user prompt; deviceResponse_: 
2014-08-21T02:42:59.284Z,1408588979.284 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802444, -121.787186) is outside the bounding box
2014-08-21T02:42:59.286Z,1408588979.286 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802444, -121.787186) is outside the bounding box
2014-08-21T02:42:59.708Z,1408588979.708 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T02:42:59.771Z,1408588979.771 [DAT](INFO): no user prompt found in:
2014-08-21T02:42:59.771Z,1408588979.771 [DAT](ERROR): no user prompt; deviceResponse_: 
2014-08-21T02:42:59.783Z,1408588979.783 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802444, -121.787186) is outside the bounding box
2014-08-21T02:42:59.789Z,1408588979.789 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802444, -121.787186) is outside the bounding box
2014-08-21T02:43:00.214Z,1408588980.214 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T02:43:00.222Z,1408588980.222 [DAT](INFO): no user prompt found in:
2014-08-21T02:43:00.222Z,1408588980.222 [DAT](ERROR): no user prompt; deviceResponse_: 
2014-08-21T02:43:00.229Z,1408588980.229 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802444, -121.787186) is outside the bounding box
2014-08-21T02:43:00.231Z,1408588980.231 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802444, -121.787186) is outside the bounding box
2014-08-21T02:43:00.662Z,1408588980.662 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T02:43:00.715Z,1408588980.715 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802444, -121.787186) is outside the bounding box
2014-08-21T02:43:00.718Z,1408588980.718 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802444, -121.787186) is outside the bounding box
2014-08-21T02:43:01.163Z,1408588981.163 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T02:43:01.196Z,1408588981.196 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802444, -121.787186) is outside the bounding box
2014-08-21T02:43:01.214Z,1408588981.214 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802444, -121.787186) is outside the bounding box
2014-08-21T02:43:01.604Z,1408588981.604 [Batt_Ocean_Server](ERROR): Battery controller B communication timeout. Re-initializing
2014-08-21T02:43:01.611Z,1408588981.611 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T02:43:01.645Z,1408588981.645 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802444, -121.787186) is outside the bounding box
2014-08-21T02:43:01.675Z,1408588981.675 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802444, -121.787186) is outside the bounding box
2014-08-21T02:43:02.069Z,1408588982.069 [Batt_Ocean_Server] Communications Fault, FailCount= 3
2014-08-21T02:43:02.069Z,1408588982.069 [Batt_Ocean_Server](ERROR): Communications Fault
2014-08-21T02:43:03.557Z,1408588983.557 [Batt_Ocean_Server](ERROR): Batt_Ocean_Server A initialization uart error: serial timeout
2014-08-21T02:43:03.558Z,1408588983.558 [Batt_Ocean_Server](ERROR): Ocean Server Batteries failed to initialize. Re-initializing
2014-08-21T02:43:03.566Z,1408588983.566 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T02:43:03.712Z,1408588983.712 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802444, -121.787186) is outside the bounding box
2014-08-21T02:43:03.723Z,1408588983.723 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802444, -121.787186) is outside the bounding box
2014-08-21T02:43:03.788Z,1408588983.788 [CBIT](ERROR): Communications Fault in component: Batt_Ocean_Server
2014-08-21T02:43:03.789Z,1408588983.789 [CBIT](CRITICAL): Communications Fault in component: Batt_Ocean_Server
2014-08-21T02:43:04.243Z,1408588984.243 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T02:43:04.251Z,1408588984.251 [DAT](INFO): no user prompt found in:user:1> 00800 bits/sec
2014-08-21T02:43:04.251Z,1408588984.251 [DAT](ERROR): no user prompt; deviceResponse_: 
2014-08-21T02:43:04.259Z,1408588984.259 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802444, -121.787186) is outside the bounding box
2014-08-21T02:43:04.261Z,1408588984.261 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802444, -121.787186) is outside the bounding box
2014-08-21T02:43:04.339Z,1408588984.339 [CommandLine](FAULT): Scheduling is paused
2014-08-21T02:43:04.712Z,1408588984.712 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T02:43:04.750Z,1408588984.750 [DAT](INFO): no user prompt found in:
2014-08-21T02:43:04.752Z,1408588984.752 [DAT](ERROR): no user prompt; deviceResponse_: 
2014-08-21T02:43:04.759Z,1408588984.759 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802444, -121.787186) is outside the bounding box
2014-08-21T02:43:04.761Z,1408588984.761 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802444, -121.787186) is outside the bounding box
2014-08-21T02:43:05.169Z,1408588985.169 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T02:43:05.173Z,1408588985.173 [NAL9602](IMPORTANT): GPS fix at: 1408588984.00
2014-08-21T02:43:05.181Z,1408588985.181 [DAT](INFO): no user prompt found in:
2014-08-21T02:43:05.181Z,1408588985.181 [DAT](ERROR): no user prompt; deviceResponse_: 
2014-08-21T02:43:05.188Z,1408588985.188 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802444, -121.787186) is outside the bounding box
2014-08-21T02:43:05.190Z,1408588985.190 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802444, -121.787186) is outside the bounding box
2014-08-21T02:43:05.265Z,1408588985.265 [Startup:StartupSatComms:A] Stopped
2014-08-21T02:43:05.265Z,1408588985.265 [Startup:StartupSatComms:B] Running Loop=1
2014-08-21T02:43:05.644Z,1408588985.644 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T02:43:05.676Z,1408588985.676 [DAT](INFO): no user prompt found in:
2014-08-21T02:43:05.676Z,1408588985.676 [DAT](ERROR): no user prompt; deviceResponse_: 
2014-08-21T02:43:05.684Z,1408588985.684 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802448, -121.787178) is outside the bounding box
2014-08-21T02:43:05.686Z,1408588985.686 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802448, -121.787178) is outside the bounding box
2014-08-21T02:43:05.762Z,1408588985.762 [Startup:StartupSatComms:B](DEBUG): Initialize ReadDataComponent to sense platform_communications
2014-08-21T02:43:06.532Z,1408588986.532 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T02:43:06.551Z,1408588986.551 [DAT](INFO): no user prompt found in:
2014-08-21T02:43:06.551Z,1408588986.551 [DAT](ERROR): no user prompt; deviceResponse_: 
2014-08-21T02:43:06.559Z,1408588986.559 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802448, -121.787178) is outside the bounding box
2014-08-21T02:43:06.561Z,1408588986.561 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802448, -121.787178) is outside the bounding box
2014-08-21T02:43:07.008Z,1408588987.008 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T02:43:07.044Z,1408588987.044 [DAT](FAULT): failed to initialize; deviceResponse_:
2014-08-21T02:43:07.044Z,1408588987.044 [DAT] Communications Fault, FailCount= 5
2014-08-21T02:43:07.044Z,1408588987.044 [DAT](ERROR): Communications Fault
2014-08-21T02:43:07.051Z,1408588987.051 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802448, -121.787178) is outside the bounding box
2014-08-21T02:43:07.053Z,1408588987.053 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802448, -121.787178) is outside the bounding box
2014-08-21T02:43:07.109Z,1408588987.109 [CBIT](ERROR): Communications Fault in component: DAT
2014-08-21T02:43:08.232Z,1408588988.232 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T02:43:08.247Z,1408588988.247 [DAT](INFO): Powering down
2014-08-21T02:43:08.386Z,1408588988.386 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802448, -121.787178) is outside the bounding box
2014-08-21T02:43:08.393Z,1408588988.393 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802448, -121.787178) is outside the bounding box
2014-08-21T02:43:08.891Z,1408588988.891 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20140821T023650/Courier0004.lzma
2014-08-21T02:43:08.898Z,1408588988.898 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T02:43:08.979Z,1408588988.979 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802448, -121.787178) is outside the bounding box
2014-08-21T02:43:08.988Z,1408588988.988 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802448, -121.787178) is outside the bounding box
2014-08-21T02:43:09.424Z,1408588989.424 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T02:43:09.449Z,1408588989.449 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802448, -121.787178) is outside the bounding box
2014-08-21T02:43:09.455Z,1408588989.455 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802448, -121.787178) is outside the bounding box
2014-08-21T02:43:09.533Z,1408588989.533 [CBIT](INFO): Clearing failed state for component DAT
2014-08-21T02:43:09.533Z,1408588989.533 [DAT] No Fault, FailCount= 5
2014-08-21T02:43:09.938Z,1408588989.938 [DataOverHttps](INFO): Moved sent file to Logs/20140821T023650/Courier0004.lzma.bak
2014-08-21T02:43:09.938Z,1408588989.938 [DataOverHttps](INFO): SBD MOMSN=1089599
2014-08-21T02:43:09.944Z,1408588989.944 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T02:43:10.009Z,1408588990.009 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802448, -121.787178) is outside the bounding box
2014-08-21T02:43:10.015Z,1408588990.015 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802448, -121.787178) is outside the bounding box
2014-08-21T02:43:10.648Z,1408588990.648 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T02:43:10.678Z,1408588990.678 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802448, -121.787178) is outside the bounding box
2014-08-21T02:43:10.679Z,1408588990.679 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802448, -121.787178) is outside the bounding box
2014-08-21T02:43:11.170Z,1408588991.170 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T02:43:11.249Z,1408588991.249 [DAT](INFO): Powering up
2014-08-21T02:43:11.249Z,1408588991.249 [DAT](DEBUG): Initializing DAT.
2014-08-21T02:43:11.307Z,1408588991.307 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802448, -121.787178) is outside the bounding box
2014-08-21T02:43:11.313Z,1408588991.313 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802448, -121.787178) is outside the bounding box
2014-08-21T02:43:12.399Z,1408588992.399 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T02:43:12.400Z,1408588992.400 [NAL9602](INFO): Powering down
2014-08-21T02:43:12.409Z,1408588992.409 [DAT](INFO): no user prompt found in:
2014-08-21T02:43:12.409Z,1408588992.409 [DAT](ERROR): no user prompt; deviceResponse_: 
2014-08-21T02:43:12.496Z,1408588992.496 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802448, -121.787178) is outside the bounding box
2014-08-21T02:43:12.499Z,1408588992.499 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802448, -121.787178) is outside the bounding box
2014-08-21T02:43:12.907Z,1408588992.907 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T02:43:12.916Z,1408588992.916 [DAT](INFO): no user prompt found in:
2014-08-21T02:43:12.916Z,1408588992.916 [DAT](ERROR): no user prompt; deviceResponse_: 
2014-08-21T02:43:12.923Z,1408588992.923 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802448, -121.787178) is outside the bounding box
2014-08-21T02:43:12.925Z,1408588992.925 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802448, -121.787178) is outside the bounding box
2014-08-21T02:43:13.365Z,1408588993.365 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T02:43:13.373Z,1408588993.373 [DAT](INFO): no user prompt found in:
2014-08-21T02:43:13.373Z,1408588993.373 [DAT](ERROR): no user prompt; deviceResponse_: 
2014-08-21T02:43:13.380Z,1408588993.380 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802448, -121.787178) is outside the bounding box
2014-08-21T02:43:13.382Z,1408588993.382 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802448, -121.787178) is outside the bounding box
2014-08-21T02:43:13.832Z,1408588993.832 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T02:43:13.840Z,1408588993.840 [DAT](INFO): no user prompt found in:
2014-08-21T02:43:13.840Z,1408588993.840 [DAT](ERROR): no user prompt; deviceResponse_: 
2014-08-21T02:43:13.877Z,1408588993.877 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802448, -121.787178) is outside the bounding box
2014-08-21T02:43:13.890Z,1408588993.890 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802448, -121.787178) is outside the bounding box
2014-08-21T02:43:14.287Z,1408588994.287 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T02:43:14.294Z,1408588994.294 [DAT](INFO): no user prompt found in:
2014-08-21T02:43:14.295Z,1408588994.295 [DAT](ERROR): no user prompt; deviceResponse_: 
2014-08-21T02:43:14.302Z,1408588994.302 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802448, -121.787178) is outside the bounding box
2014-08-21T02:43:14.304Z,1408588994.304 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802448, -121.787178) is outside the bounding box
2014-08-21T02:43:14.744Z,1408588994.744 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T02:43:14.751Z,1408588994.751 [DAT](INFO): no user prompt found in:
2014-08-21T02:43:14.752Z,1408588994.752 [DAT](ERROR): no user prompt; deviceResponse_: 
2014-08-21T02:43:14.759Z,1408588994.759 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802448, -121.787178) is outside the bounding box
2014-08-21T02:43:14.761Z,1408588994.761 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802448, -121.787178) is outside the bounding box
2014-08-21T02:43:15.704Z,1408588995.704 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T02:43:15.746Z,1408588995.746 [DAT](INFO): no user prompt found in:
2014-08-21T02:43:15.746Z,1408588995.746 [DAT](ERROR): no user prompt; deviceResponse_: 
2014-08-21T02:43:15.753Z,1408588995.753 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802448, -121.787178) is outside the bounding box
2014-08-21T02:43:15.755Z,1408588995.755 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802448, -121.787178) is outside the bounding box
2014-08-21T02:43:16.211Z,1408588996.211 [DataOverHttps](INFO): Sending 271 bytes from file Logs/20140821T024050/Courier0000.lzma
2014-08-21T02:43:16.215Z,1408588996.215 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T02:43:16.244Z,1408588996.244 [DAT](INFO): no user prompt found in:+++r:1> 00800 bits/sec
2014-08-21T02:43:16.244Z,1408588996.244 [DAT](ERROR): no user prompt; deviceResponse_: 
2014-08-21T02:43:16.252Z,1408588996.252 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802448, -121.787178) is outside the bounding box
2014-08-21T02:43:16.254Z,1408588996.254 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802448, -121.787178) is outside the bounding box
2014-08-21T02:43:16.691Z,1408588996.691 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T02:43:16.699Z,1408588996.699 [DAT](INFO): no user prompt found in:+++r:1> 00800 bits/sec
2014-08-21T02:43:16.699Z,1408588996.699 [DAT](ERROR): no user prompt; deviceResponse_: 
2014-08-21T02:43:16.707Z,1408588996.707 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802448, -121.787178) is outside the bounding box
2014-08-21T02:43:16.709Z,1408588996.709 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802448, -121.787178) is outside the bounding box
2014-08-21T02:43:17.145Z,1408588997.145 [DataOverHttps](INFO): Moved sent file to Logs/20140821T024050/Courier0000.lzma.bak
2014-08-21T02:43:17.146Z,1408588997.146 [DataOverHttps](INFO): SBD MOMSN=1089601
2014-08-21T02:43:17.155Z,1408588997.155 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T02:43:17.163Z,1408588997.163 [DAT](INFO): no user prompt found in:
2014-08-21T02:43:17.163Z,1408588997.163 [DAT](ERROR): no user prompt; deviceResponse_: 
2014-08-21T02:43:17.171Z,1408588997.171 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802448, -121.787178) is outside the bounding box
2014-08-21T02:43:17.172Z,1408588997.172 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802448, -121.787178) is outside the bounding box
2014-08-21T02:43:17.923Z,1408588997.923 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T02:43:17.939Z,1408588997.939 [DAT](INFO): no user prompt found in:
2014-08-21T02:43:17.939Z,1408588997.939 [DAT](ERROR): no user prompt; deviceResponse_: 
2014-08-21T02:43:17.947Z,1408588997.947 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802448, -121.787178) is outside the bounding box
2014-08-21T02:43:17.949Z,1408588997.949 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802448, -121.787178) is outside the bounding box
2014-08-21T02:43:18.389Z,1408588998.389 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T02:43:18.397Z,1408588998.397 [DAT](INFO): no user prompt found in:
2014-08-21T02:43:18.397Z,1408588998.397 [DAT](ERROR): no user prompt; deviceResponse_: 
2014-08-21T02:43:18.464Z,1408588998.464 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802448, -121.787178) is outside the bounding box
2014-08-21T02:43:18.466Z,1408588998.466 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802448, -121.787178) is outside the bounding box
2014-08-21T02:43:19.516Z,1408588999.516 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T02:43:19.543Z,1408588999.543 [DAT](INFO): no user prompt found in:
2014-08-21T02:43:19.543Z,1408588999.543 [DAT](ERROR): no user prompt; deviceResponse_: 
2014-08-21T02:43:19.616Z,1408588999.616 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802448, -121.787178) is outside the bounding box
2014-08-21T02:43:19.617Z,1408588999.617 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802448, -121.787178) is outside the bounding box
2014-08-21T02:43:20.116Z,1408589000.116 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T02:43:20.143Z,1408589000.143 [DAT](INFO): no user prompt found in:
2014-08-21T02:43:20.143Z,1408589000.143 [DAT](ERROR): no user prompt; deviceResponse_: 
2014-08-21T02:43:20.154Z,1408589000.154 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802448, -121.787178) is outside the bounding box
2014-08-21T02:43:20.160Z,1408589000.160 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802448, -121.787178) is outside the bounding box
2014-08-21T02:43:20.635Z,1408589000.635 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T02:43:20.645Z,1408589000.645 [DAT](INFO): no user prompt found in:
2014-08-21T02:43:20.645Z,1408589000.645 [DAT](ERROR): no user prompt; deviceResponse_: 
2014-08-21T02:43:20.653Z,1408589000.653 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802448, -121.787178) is outside the bounding box
2014-08-21T02:43:20.655Z,1408589000.655 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802448, -121.787178) is outside the bounding box
2014-08-21T02:43:21.104Z,1408589001.104 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T02:43:21.112Z,1408589001.112 [DAT](INFO): no user prompt found in:
2014-08-21T02:43:21.112Z,1408589001.112 [DAT](ERROR): no user prompt; deviceResponse_: 
2014-08-21T02:43:21.119Z,1408589001.119 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802448, -121.787178) is outside the bounding box
2014-08-21T02:43:21.121Z,1408589001.121 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802448, -121.787178) is outside the bounding box
2014-08-21T02:43:21.555Z,1408589001.555 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T02:43:21.563Z,1408589001.563 [DAT](INFO): no user prompt found in:
2014-08-21T02:43:21.563Z,1408589001.563 [DAT](ERROR): no user prompt; deviceResponse_: 
2014-08-21T02:43:21.571Z,1408589001.571 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802448, -121.787178) is outside the bounding box
2014-08-21T02:43:21.573Z,1408589001.573 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802448, -121.787178) is outside the bounding box
2014-08-21T02:43:22.015Z,1408589002.015 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T02:43:22.023Z,1408589002.023 [DAT](INFO): no user prompt found in:
2014-08-21T02:43:22.023Z,1408589002.023 [DAT](ERROR): no user prompt; deviceResponse_: 
2014-08-21T02:43:22.031Z,1408589002.031 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802448, -121.787178) is outside the bounding box
2014-08-21T02:43:22.032Z,1408589002.032 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802448, -121.787178) is outside the bounding box
2014-08-21T02:43:23.105Z,1408589003.105 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T02:43:23.152Z,1408589003.152 [DAT](INFO): no user prompt found in:
2014-08-21T02:43:23.152Z,1408589003.152 [DAT](ERROR): no user prompt; deviceResponse_: 
2014-08-21T02:43:23.170Z,1408589003.170 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802448, -121.787178) is outside the bounding box
2014-08-21T02:43:23.176Z,1408589003.176 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802448, -121.787178) is outside the bounding box
2014-08-21T02:43:23.652Z,1408589003.652 [DataOverHttps](INFO): Sending 297 bytes from file Logs/20140821T023650/Express0005.lzma
2014-08-21T02:43:23.662Z,1408589003.662 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T02:43:23.707Z,1408589003.707 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802448, -121.787178) is outside the bounding box
2014-08-21T02:43:23.709Z,1408589003.709 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802448, -121.787178) is outside the bounding box
2014-08-21T02:43:24.127Z,1408589004.127 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T02:43:24.138Z,1408589004.138 [DAT](INFO): no user prompt found in:Aug 21 2014 03:43:11 
ansponder version 8.3.1

2014-08-21T02:43:24.139Z,1408589004.139 [DAT](ERROR): no user prompt; deviceResponse_: 
2014-08-21T02:43:24.156Z,1408589004.156 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802448, -121.787178) is outside the bounding box
2014-08-21T02:43:24.162Z,1408589004.162 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802448, -121.787178) is outside the bounding box
2014-08-21T02:43:24.649Z,1408589004.649 [DataOverHttps](INFO): Moved sent file to Logs/20140821T023650/Express0005.lzma.bak
2014-08-21T02:43:24.649Z,1408589004.649 [DataOverHttps](INFO): SBD MOMSN=1089605
2014-08-21T02:43:24.684Z,1408589004.684 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T02:43:24.732Z,1408589004.732 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802448, -121.787178) is outside the bounding box
2014-08-21T02:43:24.734Z,1408589004.734 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802448, -121.787178) is outside the bounding box
2014-08-21T02:43:25.636Z,1408589005.636 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T02:43:25.659Z,1408589005.659 [DAT](INFO): no user prompt found in:
NNECT 00800 bits/sec
2014-08-21T02:43:25.659Z,1408589005.659 [DAT](ERROR): no user prompt; deviceResponse_: 
2014-08-21T02:43:25.671Z,1408589005.671 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802448, -121.787178) is outside the bounding box
2014-08-21T02:43:25.677Z,1408589005.677 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802448, -121.787178) is outside the bounding box
2014-08-21T02:43:26.155Z,1408589006.155 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T02:43:26.176Z,1408589006.176 [DAT](INFO): no user prompt found in:user:1> 00800 bits/sec
2014-08-21T02:43:26.177Z,1408589006.177 [DAT](ERROR): no user prompt; deviceResponse_: 
2014-08-21T02:43:26.190Z,1408589006.190 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802448, -121.787178) is outside the bounding box
2014-08-21T02:43:26.192Z,1408589006.192 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802448, -121.787178) is outside the bounding box
2014-08-21T02:43:27.083Z,1408589007.083 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T02:43:27.127Z,1408589007.127 [DAT](INFO): no user prompt found in:
2014-08-21T02:43:27.127Z,1408589007.127 [DAT](ERROR): no user prompt; deviceResponse_: 
2014-08-21T02:43:27.139Z,1408589007.139 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802448, -121.787178) is outside the bounding box
2014-08-21T02:43:27.141Z,1408589007.141 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802448, -121.787178) is outside the bounding box
2014-08-21T02:43:27.604Z,1408589007.604 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T02:43:27.612Z,1408589007.612 [DAT](INFO): no user prompt found in:
2014-08-21T02:43:27.612Z,1408589007.612 [DAT](ERROR): no user prompt; deviceResponse_: 
2014-08-21T02:43:27.656Z,1408589007.656 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802448, -121.787178) is outside the bounding box
2014-08-21T02:43:27.658Z,1408589007.658 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802448, -121.787178) is outside the bounding box
2014-08-21T02:43:28.092Z,1408589008.092 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T02:43:28.100Z,1408589008.100 [DAT](INFO): no user prompt found in:
2014-08-21T02:43:28.100Z,1408589008.100 [DAT](ERROR): no user prompt; deviceResponse_: 
2014-08-21T02:43:28.107Z,1408589008.107 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802448, -121.787178) is outside the bounding box
2014-08-21T02:43:28.109Z,1408589008.109 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802448, -121.787178) is outside the bounding box
2014-08-21T02:43:28.565Z,1408589008.565 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T02:43:28.572Z,1408589008.572 [DAT](INFO): no user prompt found in:
2014-08-21T02:43:28.573Z,1408589008.573 [DAT](ERROR): no user prompt; deviceResponse_: 
2014-08-21T02:43:28.580Z,1408589008.580 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802448, -121.787178) is outside the bounding box
2014-08-21T02:43:28.582Z,1408589008.582 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802448, -121.787178) is outside the bounding box
2014-08-21T02:43:29.010Z,1408589009.010 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T02:43:29.017Z,1408589009.017 [DAT](INFO): no user prompt found in:
2014-08-21T02:43:29.017Z,1408589009.017 [DAT](ERROR): no user prompt; deviceResponse_: 
2014-08-21T02:43:29.025Z,1408589009.025 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802448, -121.787178) is outside the bounding box
2014-08-21T02:43:29.026Z,1408589009.026 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802448, -121.787178) is outside the bounding box
2014-08-21T02:43:29.470Z,1408589009.470 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T02:43:29.479Z,1408589009.480 [DAT](INFO): no user prompt found in:
2014-08-21T02:43:29.480Z,1408589009.480 [DAT](ERROR): no user prompt; deviceResponse_: 
2014-08-21T02:43:29.487Z,1408589009.487 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802448, -121.787178) is outside the bounding box
2014-08-21T02:43:29.489Z,1408589009.489 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802448, -121.787178) is outside the bounding box
2014-08-21T02:43:30.511Z,1408589010.511 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T02:43:30.546Z,1408589010.546 [DAT](FAULT): failed to initialize; deviceResponse_:
2014-08-21T02:43:30.546Z,1408589010.546 [DAT] Communications Fault, FailCount= 6
2014-08-21T02:43:30.547Z,1408589010.547 [DAT](ERROR): Communications Fault
2014-08-21T02:43:30.554Z,1408589010.554 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802448, -121.787178) is outside the bounding box
2014-08-21T02:43:30.556Z,1408589010.556 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802448, -121.787178) is outside the bounding box
2014-08-21T02:43:30.629Z,1408589010.629 [CBIT](ERROR): Communications Fault in component: DAT
2014-08-21T02:43:31.032Z,1408589011.032 [DataOverHttps](INFO): Sending 1021 bytes from file Logs/20140821T024050/Express0001.lzma
2014-08-21T02:43:31.045Z,1408589011.045 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T02:43:31.051Z,1408589011.051 [DAT](INFO): Powering down
2014-08-21T02:43:31.211Z,1408589011.211 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802448, -121.787178) is outside the bounding box
2014-08-21T02:43:31.213Z,1408589011.213 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802448, -121.787178) is outside the bounding box
2014-08-21T02:43:31.618Z,1408589011.618 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T02:43:31.631Z,1408589011.631 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802448, -121.787178) is outside the bounding box
2014-08-21T02:43:31.633Z,1408589011.633 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802448, -121.787178) is outside the bounding box
2014-08-21T02:43:32.044Z,1408589012.044 [DataOverHttps](INFO): Moved sent file to Logs/20140821T024050/Express0001.lzma.bak
2014-08-21T02:43:32.045Z,1408589012.045 [DataOverHttps](INFO): SBD MOMSN=1089613
2014-08-21T02:43:32.054Z,1408589012.054 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T02:43:32.111Z,1408589012.111 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802448, -121.787178) is outside the bounding box
2014-08-21T02:43:32.121Z,1408589012.121 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802448, -121.787178) is outside the bounding box
2014-08-21T02:43:32.145Z,1408589012.145 [CBIT](INFO): Clearing failed state for component DAT
2014-08-21T02:43:32.145Z,1408589012.145 [DAT] No Fault, FailCount= 6
2014-08-21T02:43:32.752Z,1408589012.752 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T02:43:32.782Z,1408589012.782 [HFRadarCompactModelForecaster](DEBUG): Did not find new historical expansion coefficients.
2014-08-21T02:43:32.785Z,1408589012.785 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802448, -121.787178) is outside the bounding box
2014-08-21T02:43:32.787Z,1408589012.787 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802448, -121.787178) is outside the bounding box
2014-08-21T02:43:32.800Z,1408589012.800 [Startup:StartupSatComms:B] Stopped
2014-08-21T02:43:32.800Z,1408589012.800 [Startup:StartupSatComms](INFO): Completed Startup:StartupSatComms
2014-08-21T02:43:32.800Z,1408589012.800 [Startup:StartupSatComms] Stopped
2014-08-21T02:43:32.800Z,1408589012.800 [Startup:StartupSatComms](INFO): Aggregate::uninitialize Startup:StartupSatComms
2014-08-21T02:43:32.801Z,1408589012.801 [Startup](INFO): Completed Startup
2014-08-21T02:43:32.801Z,1408589012.801 [Startup] Stopped
2014-08-21T02:43:32.801Z,1408589012.801 [Startup](INFO): Aggregate::uninitialize Startup
2014-08-21T02:43:32.802Z,1408589012.802 [Startup:A.GoToSurface] Stopped
2014-08-21T02:43:32.802Z,1408589012.802 [Startup:A.GoToSurface](DEBUG): Uninitialize GoToSurfaceComponent.
2014-08-21T02:43:33.266Z,1408589013.266 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T02:43:33.285Z,1408589013.285 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802448, -121.787178) is outside the bounding box
2014-08-21T02:43:33.287Z,1408589013.287 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802448, -121.787178) is outside the bounding box
2014-08-21T02:43:33.300Z,1408589013.300 [MissionManager](IMPORTANT): Started mission Default
2014-08-21T02:43:33.301Z,1408589013.301 [Default] Running Loop=1
2014-08-21T02:43:33.301Z,1408589013.301 [Default](INFO): Aggregate::initialize Default
2014-08-21T02:43:33.301Z,1408589013.301 [Default:B.GoToSurface] Running Loop=1
2014-08-21T02:43:33.301Z,1408589013.301 [Default:B.GoToSurface](DEBUG): Initialize GoToSurfaceComponent.
2014-08-21T02:43:33.301Z,1408589013.301 [Default:B.GoToSurface](DEBUG): No depth rate setting specified. Using default value of nan m/s.
2014-08-21T02:43:33.302Z,1408589013.302 [Default:B.GoToSurface](DEBUG): No pitch setting specified. Using default value of nan degrees.
2014-08-21T02:43:33.302Z,1408589013.302 [Default:B.GoToSurface](DEBUG): No speed setting specified. Using default value of 0.500000 m/s.
2014-08-21T02:43:33.302Z,1408589013.302 [Default:StartClock] Running Loop=1
2014-08-21T02:43:33.302Z,1408589013.302 [Default:StartClock](INFO): Aggregate::initialize Default:StartClock
2014-08-21T02:43:33.302Z,1408589013.302 [Default:StartClock:A] Running Loop=1
2014-08-21T02:43:33.327Z,1408589013.327 [Default:StartClock:A] Stopped
2014-08-21T02:43:33.331Z,1408589013.331 [Default:StartClock](INFO): Completed Default:StartClock
2014-08-21T02:43:33.331Z,1408589013.331 [Default:StartClock] Stopped
2014-08-21T02:43:33.331Z,1408589013.331 [Default:StartClock](INFO): Aggregate::uninitialize Default:StartClock
2014-08-21T02:43:34.207Z,1408589014.207 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T02:43:34.247Z,1408589014.247 [DAT](INFO): Powering up
2014-08-21T02:43:34.247Z,1408589014.247 [DAT](DEBUG): Initializing DAT.
2014-08-21T02:43:34.307Z,1408589014.307 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802448, -121.787178) is outside the bounding box
2014-08-21T02:43:34.309Z,1408589014.309 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802448, -121.787178) is outside the bounding box
2014-08-21T02:43:34.340Z,1408589014.340 [Default:WaitAtTheSurface] Running Loop=1
2014-08-21T02:43:34.340Z,1408589014.340 [Default:WaitAtTheSurface](INFO): Aggregate::initialize Default:WaitAtTheSurface
2014-08-21T02:43:34.340Z,1408589014.340 [Default:WaitAtTheSurface:RunApplicationAtLowSpeed.SetSpeed] Running Loop=1
2014-08-21T02:43:34.340Z,1408589014.340 [Default:WaitAtTheSurface:RunApplicationAtLowSpeed.SetSpeed](DEBUG): Initialize.
2014-08-21T02:43:34.755Z,1408589014.755 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T02:43:34.791Z,1408589014.791 [DAT](INFO): no user prompt found in:
2014-08-21T02:43:34.791Z,1408589014.791 [DAT](ERROR): no user prompt; deviceResponse_: 
2014-08-21T02:43:34.803Z,1408589014.803 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802448, -121.787178) is outside the bounding box
2014-08-21T02:43:34.818Z,1408589014.818 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802448, -121.787178) is outside the bounding box
2014-08-21T02:43:34.903Z,1408589014.903 [Default:WaitAtTheSurface:RunApplicationAtLowSpeed.SetSpeed] Running Loop=1
2014-08-21T02:43:39.799Z,1408589019.799 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T02:43:39.835Z,1408589019.835 [DAT](INFO): no user prompt found in:
2014-08-21T02:43:39.835Z,1408589019.835 [DAT](ERROR): no user prompt; deviceResponse_: 
2014-08-21T02:43:39.843Z,1408589019.843 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802448, -121.787178) is outside the bounding box
2014-08-21T02:43:39.845Z,1408589019.845 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802448, -121.787178) is outside the bounding box
2014-08-21T02:43:44.798Z,1408589024.798 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T02:43:44.806Z,1408589024.806 [DAT](INFO): no user prompt found in:+++r:1> 00800 bits/sec
2014-08-21T02:43:44.806Z,1408589024.806 [DAT](ERROR): no user prompt; deviceResponse_: 
2014-08-21T02:43:44.854Z,1408589024.854 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802448, -121.787178) is outside the bounding box
2014-08-21T02:43:44.856Z,1408589024.856 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802448, -121.787178) is outside the bounding box
2014-08-21T02:43:49.794Z,1408589029.794 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T02:43:49.875Z,1408589029.875 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802448, -121.787178) is outside the bounding box
2014-08-21T02:43:49.877Z,1408589029.877 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802448, -121.787178) is outside the bounding box
2014-08-21T02:43:54.801Z,1408589034.801 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T02:43:54.807Z,1408589034.807 [DAT](FAULT): failed to initialize; deviceResponse_:user:1> 00800 bits/sec

2014-08-21T02:43:54.807Z,1408589034.807 [DAT] Communications Fault, FailCount= 7
2014-08-21T02:43:54.808Z,1408589034.808 [DAT](ERROR): Communications Fault
2014-08-21T02:43:54.839Z,1408589034.839 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802448, -121.787178) is outside the bounding box
2014-08-21T02:43:54.854Z,1408589034.854 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802448, -121.787178) is outside the bounding box
2014-08-21T02:43:54.927Z,1408589034.927 [CBIT](ERROR): Communications Fault in component: DAT
2014-08-21T02:43:59.910Z,1408589039.910 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T02:44:00.019Z,1408589040.019 [DAT](INFO): Powering down
2014-08-21T02:44:00.178Z,1408589040.178 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802448, -121.787178) is outside the bounding box
2014-08-21T02:44:00.180Z,1408589040.180 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802448, -121.787178) is outside the bounding box
2014-08-21T02:44:04.886Z,1408589044.886 [DVL_micro](DEBUG): LCB error: Software Overcurrent.
2014-08-21T02:44:04.926Z,1408589044.926 [HFRCMReconstructedInterpolator](DEBUG): requested location (36.802448, -121.787178) is outside the bounding box
2014-08-21T02:44:04.932Z,1408589044.932 [HFRCMSpaceInterpolator](DEBUG): requested location (36.802448, -121.787178) is outside the bounding box
2014-08-21T02:44:06.517Z,1408589046.517 [CommandLine](IMPORTANT): got command restart application
2014-08-21T02:44:07.523Z,1408589047.523 [CommandLine ThreadHandler](INFO): Uninitializing protected caller thread.
2014-08-21T02:44:07.523Z,1408589047.523 [CommandLine ThreadHandler](INFO): Thread cancelled.
2014-08-21T02:44:07.680Z,1408589047.680 [Supervisor](DEBUG): Uninitializing supervisor and starting cleanup.  Bye!
2014-08-21T02:44:07.680Z,1408589047.680 [CommandLine ThreadHandler](INFO): Thread cancelled.
2014-08-21T02:44:07.681Z,1408589047.681 [CommandLine](INFO): Join timeout helper Thread ID is 4790
2014-08-21T02:44:07.682Z,1408589047.682 [ComponentRegistry](INFO): Shutting down NavChartDb ThreadHandler
2014-08-21T02:44:07.682Z,1408589047.682 [NavChartDb ThreadHandler](INFO): Thread cancelled.
2014-08-21T02:44:07.682Z,1408589047.682 [NavChartDb](INFO): Join timeout helper Thread ID is 4791
2014-08-21T02:44:08.073Z,1408589048.073 [NavChartDb ThreadHandler](INFO): Uninitializing protected caller thread.
2014-08-21T02:44:08.073Z,1408589048.073 [NavChartDb ThreadHandler](INFO): Thread cancelled.
2014-08-21T02:44:08.081Z,1408589048.081 [ComponentRegistry](INFO): Shutting down Radio_Freewave ThreadHandler
2014-08-21T02:44:08.081Z,1408589048.081 [Radio_Freewave ThreadHandler](INFO): Thread cancelled.
2014-08-21T02:44:08.081Z,1408589048.081 [Radio_Freewave](INFO): Join timeout helper Thread ID is 4792
2014-08-21T02:44:08.414Z,1408589048.414 [Radio_Freewave ThreadHandler](INFO): Uninitializing protected caller thread.
2014-08-21T02:44:08.504Z,1408589048.504 [Radio_Freewave](INFO): Powering down
2014-08-21T02:44:08.914Z,1408589048.914 [Radio_Freewave ThreadHandler](INFO): Thread cancelled.
2014-08-21T02:44:08.926Z,1408589048.926 [ComponentRegistry](INFO): Shutting down WetLabsBB2FL ThreadHandler
2014-08-21T02:44:08.926Z,1408589048.926 [WetLabsBB2FL ThreadHandler](INFO): Thread cancelled.
2014-08-21T02:44:08.927Z,1408589048.927 [WetLabsBB2FL](INFO): Join timeout helper Thread ID is 4794
2014-08-21T02:44:09.127Z,1408589049.127 [WetLabsBB2FL ThreadHandler](INFO): Uninitializing protected caller thread.
2014-08-21T02:44:09.127Z,1408589049.127 [WetLabsBB2FL](INFO): Powering down
2014-08-21T02:44:09.128Z,1408589049.128 [WetLabsBB2FL ThreadHandler](INFO): Thread cancelled.
2014-08-21T02:44:09.147Z,1408589049.147 [ComponentRegistry](INFO): Shutting down CTD_NeilBrown ThreadHandler
2014-08-21T02:44:09.147Z,1408589049.147 [CTD_NeilBrown ThreadHandler](INFO): Thread cancelled.
2014-08-21T02:44:09.147Z,1408589049.147 [CTD_NeilBrown](INFO): Join timeout helper Thread ID is 4795
2014-08-21T02:44:09.311Z,1408589049.311 [CTD_NeilBrown ThreadHandler](INFO): Uninitializing protected caller thread.
2014-08-21T02:44:09.311Z,1408589049.311 [CTD_NeilBrown](INFO): Powering down
2014-08-21T02:44:09.312Z,1408589049.312 [CTD_NeilBrown ThreadHandler](INFO): Thread cancelled.
2014-08-21T02:44:09.328Z,1408589049.328 [ComponentRegistry](INFO): Shutting down logger ThreadHandler
2014-08-21T02:44:09.328Z,1408589049.328 [logger ThreadHandler](INFO): Thread cancelled.
2014-08-21T02:44:09.328Z,1408589049.328 [logger](INFO): Join timeout helper Thread ID is 4796
2014-08-21T02:44:09.359Z,1408589049.359 [logger ThreadHandler](INFO): Uninitializing protected caller thread.
2014-08-21T02:44:09.359Z,1408589049.359 [logger ThreadHandler](INFO): Thread cancelled.
2014-08-21T02:44:09.368Z,1408589049.368 [ComponentRegistry](INFO): Shutting down CommandLine ThreadHandler
2014-08-21T02:44:09.368Z,1408589049.368 [CommandLine ThreadHandler](INFO): Thread cancelled.
2014-08-21T02:44:09.368Z,1408589049.368 [ComponentRegistry](INFO): Shutting down controlThread ThreadHandler
2014-08-21T02:44:09.368Z,1408589049.368 [controlThread ThreadHandler](INFO): Thread cancelled.
2014-08-21T02:44:09.369Z,1408589049.369 [controlThread](INFO): Join timeout helper Thread ID is 4797
2014-08-21T02:44:09.379Z,1408589049.379 [controlThread ThreadHandler](INFO): Uninitializing protected caller thread.
2014-08-21T02:44:09.379Z,1408589049.379 [controlThread](DEBUG): Uninitializing ControlThread
2014-08-21T02:44:09.380Z,1408589049.380 [AHRS_sp3003D](INFO): Powering down
2014-08-21T02:44:09.540Z,1408589049.540 [DVL_micro](INFO): uninitialize:Powering down
2014-08-21T02:44:09.542Z,1408589049.542 [NAL9602](INFO): Powering down
2014-08-21T02:44:09.544Z,1408589049.544 [DAT](INFO): Powering down
2014-08-21T02:44:09.546Z,1408589049.546 [DepthRateCalculator](DEBUG): Initializing DepthRateCalculator.
2014-08-21T02:44:09.550Z,1408589049.550 [NavChart](DEBUG): Uninitialize NavChart Navigation.
2014-08-21T02:44:09.551Z,1408589049.551 [Default] Stopped
2014-08-21T02:44:09.551Z,1408589049.551 [Default](INFO): Aggregate::uninitialize Default
2014-08-21T02:44:09.551Z,1408589049.551 [Default:B.GoToSurface] Stopped
2014-08-21T02:44:09.551Z,1408589049.551 [Default:B.GoToSurface](DEBUG): Uninitialize GoToSurfaceComponent.
2014-08-21T02:44:09.552Z,1408589049.552 [Default:WaitAtTheSurface] Stopped
2014-08-21T02:44:09.552Z,1408589049.552 [Default:WaitAtTheSurface](INFO): Aggregate::uninitialize Default:WaitAtTheSurface
2014-08-21T02:44:09.552Z,1408589049.552 [Default:WaitAtTheSurface:RunApplicationAtLowSpeed.SetSpeed] Stopped
2014-08-21T02:44:09.552Z,1408589049.552 [Default:WaitAtTheSurface:RunApplicationAtLowSpeed.SetSpeed](DEBUG): Uninitialize.
2014-08-21T02:44:09.557Z,1408589049.557 [VerticalControl](DEBUG): Uninitialize VerticalControlComponent.
2014-08-21T02:44:09.558Z,1408589049.558 [HorizontalControl](DEBUG): Uninitialize HorizontalControlComponent.
2014-08-21T02:44:09.558Z,1408589049.558 [SpeedControl](DEBUG): Uninitialize SpeedControlComponent.
2014-08-21T02:44:09.558Z,1408589049.558 [LoopControl](DEBUG): Uninitialize LoopControlComponent.
2014-08-21T02:44:09.559Z,1408589049.559 [BuoyancyServo](DEBUG): Uninitialize Buoyancy Servo.
2014-08-21T02:44:09.559Z,1408589049.559 [BuoyancyServo](INFO): Powering down
2014-08-21T02:44:09.572Z,1408589049.572 [ElevatorServo](DEBUG): Uninitialize Elevator Servo.
2014-08-21T02:44:09.572Z,1408589049.572 [ElevatorServo](INFO): Powering down
2014-08-21T02:44:09.573Z,1408589049.573 [MassServo](DEBUG): Uninitialize Mass Servo.
2014-08-21T02:44:09.573Z,1408589049.573 [MassServo](INFO): Powering down
2014-08-21T02:44:09.574Z,1408589049.574 [RudderServo](DEBUG): Uninitialize Rudder Servo.
2014-08-21T02:44:09.574Z,1408589049.574 [RudderServo](INFO): Powering down
2014-08-21T02:44:09.575Z,1408589049.575 [ThrusterServo](DEBUG): Uninitialize Thruster Servo.
2014-08-21T02:44:09.576Z,1408589049.576 [ThrusterServo](INFO): Powering down
2014-08-21T02:44:09.578Z,1408589049.578 [SBIT](DEBUG): Uninitialize SBIT Component.
2014-08-21T02:44:09.578Z,1408589049.578 [IBIT](DEBUG): Uninitialize IBIT Component.
2014-08-21T02:44:09.578Z,1408589049.578 [CBIT](DEBUG): Uninitialize CBIT Component.
2014-08-21T02:44:09.624Z,1408589049.624 [controlThread ThreadHandler](INFO): Thread cancelled.
2014-08-21T02:44:09.692Z,1408589049.692 [WetLabsBB2FL ThreadHandler](INFO): Thread cancelled.
2014-08-21T02:44:09.696Z,1408589049.696 [CTD_NeilBrown ThreadHandler](INFO): Thread cancelled.
2014-08-21T02:44:09.704Z,1408589049.704 [Radio_Freewave ThreadHandler](INFO): Thread cancelled.
2014-08-21T02:44:09.769Z,1408589049.769 [NavChartDb ThreadHandler](INFO): Thread cancelled.
2014-08-21T02:44:09.823Z,1408589049.823 [logger ThreadHandler](INFO): Thread cancelled.