daphne Path

trajectory

20140816T011554 [MissionManager]:Started mission Startup

20140816T011649 [CommandLine]:got command conversation stop

20140816T011649 [CommandLine]:Conversation is stopped.

20140816T011733 [MissionManager]:Started mission Default

20140816T011804 [DVL_micro]:DVL failed to acquire valid data within timeout.

20140816T011804 [DVL_micro]:Data Fault

20140816T011804 [CBIT]:Data Fault in component: DVL_micro

20140816T011805 [DVL_micro]:LCB fault: Software Overcurrent.

20140816T011805 [DVL_micro]:Hardware Fault

20140816T011916 [NAL9602]:Failed to initiate SBD session. Error code: 2

20140816T012112 [DVL_micro]:DVL failed to acquire valid data within timeout.

20140816T012112 [DVL_micro]:Data Fault

20140816T012112 [CBIT]:Data Fault in component: DVL_micro

20140816T012122 [DVL_micro]:LCB fault: Software Overcurrent.

20140816T012122 [DVL_micro]:Hardware Fault

20140816T012447 [DVL_micro]:DVL failed to acquire valid data within timeout.

20140816T012447 [DVL_micro]:Data Fault

20140816T012447 [CBIT]:Data Fault in component: DVL_micro

20140816T012457 [DVL_micro]:LCB fault: Software Overcurrent.

20140816T012457 [DVL_micro]:Hardware Fault

20140816T020452 [DVL_micro]:LCB fault: Current Limiter Activated.

20140816T023013 [DVL_micro]:LCB fault: Current Limiter Activated.

20140816T031408 [Depth_Keller]:Pressure reading out of range: 1830.337036 decibar

20140816T031918 [Depth_Keller]:Pressure reading out of range: 1830.320435 decibar

20140816T032038 [Depth_Keller]:Pressure reading out of range: 1830.318726 decibar

20140816T032233 [NAL9602]:Failed to initiate SBD session. Error code: 2

20140816T032258 [NAL9602]:Failed to initiate SBD session. Error code: 2

20140816T032426 [Radio_Freewave]:LCB fault: Software Overcurrent.

20140816T032426 [Radio_Freewave]:Hardware Fault

20140816T032430 [CBIT]:Hardware Fault in component: Radio_Freewave

20140816T032437 [Radio_Freewave]:Starting PPPD with command:/sbin/pppd nocrtscts /dev/ttyS1 noauth 115200 10.1.1.2:10.1.1.1 persist maxfail 0

20140816T034025 [Depth_Keller]:Pressure reading out of range: -850.609253 decibar

20140816T035525 [Depth_Keller]:Pressure reading out of range: -850.721008 decibar

20140816T035910 [Depth_Keller]:Pressure reading out of range: -850.609253 decibar

20140816T042458 [CommandLine]:got command ! ifconfig -a

20140816T042459 [CommandLine]:eth0 Link encap:Ethernet HWaddr 00:50:C2:8C:E7:DA # UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1# RX packets:378 errors:0 dropped:0 overruns:0 frame:0# TX packets:1179 errors:0 dropped:0 overruns:0 carrier:0# collisions:0 txqueuelen:1000 # RX bytes:127386 (124.4 Kb) TX bytes:695610 (679.3 Kb)# Interrupt:29 ##lo Link encap:Local Loopback # inet addr:127.0.0.1 Mask:255.0.0.0# UP LOOPBACK RUNNING MTU:16436 Metric:1# RX packets:0 errors:0 dropped:0 overruns:0 frame:0# TX packets:0 errors:0 dropped:0 overruns:0 carrier:0# collisions:0 txqueuelen:0 # RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)##ppp0 Link encap:Point-to-Point Protocol # POINTOPOINT NOARP MULTICAST MTU:1500 Metric:1# RX packets:0 errors:0 dropped:0 overruns:0 frame:0# TX packets:0 errors:0 dropped:0 overruns:0 carrier:0# collisions:0 txqueuelen:3 # RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)##

20140816T042633 [Radio_Freewave]:Starting PPPD with command:/sbin/pppd nocrtscts /dev/ttyS1 noauth 115200 10.1.1.2:10.1.1.1 persist maxfail 0

20140816T050012 [DVL_micro]:LCB fault: Current Limiter Activated.

20140816T052253 [Radio_Freewave]:Starting PPPD with command:/sbin/pppd nocrtscts /dev/ttyS1 noauth 115200 10.1.1.2:10.1.1.1 persist maxfail 0

20140816T052806 [NAL9602]:Inadequate Iridium signal strength reported: 0

20140816T052818 [NAL9602]:Inadequate Iridium signal strength reported: 0

20140816T052842 [Radio_Freewave]:LCB fault: Software Overcurrent.

20140816T052842 [Radio_Freewave]:Hardware Fault

20140816T052847 [CBIT]:STOP DEPTH REACHED. Terminating Mission.#

20140816T052847 [CBIT]:Hardware Fault in component: Radio_Freewave

20140816T052852 [CommandLine]:Scheduling is paused

20140816T063005 [Radio_Freewave]:LCB fault: Software Overcurrent.

20140816T063005 [Radio_Freewave]:Hardware Fault

20140816T063009 [CBIT]:Hardware Fault in component: Radio_Freewave

20140816T071529 [CBIT]:Beginning GF scan

20140816T131620 [CBIT]:Beginning GF scan

20140816T174633 [DVL_micro]:DVL Failure: Failed to read in all data items. Got 43 of 46

20140816T191709 [CBIT]:Beginning GF scan

20140817T010051 [NAL9602]:NAL9602 initialize error - Can't enter command mode:##+CIEV:0,3#

20140817T010051 [NAL9602]:Communications Fault

20140817T010051 [CBIT]:Communications Fault in component: NAL9602

20140817T030410 [Batt_Ocean_Server]:Battery controller B communication timeout. Re-initializing

20140817T030411 [Batt_Ocean_Server]:Communications Fault

20140817T030412 [CBIT]:Communications Fault in component: Batt_Ocean_Server

20140817T032727 [AHRS_sp3003D]:LCB fault: Invalid Command. Hardware Overcurrent Shutdown. Current Limiter Activated.

20140817T032727 [CBIT]:Hardware Fault in component: AHRS_sp3003D

20140817T032737 [AHRS_sp3003D]:LCB fault: Invalid Command. Hardware Overcurrent Shutdown. Current Limiter Activated.

20140817T033127 [Batt_Ocean_Server]:Battery controller B communication timeout. Re-initializing

20140817T033132 [Batt_Ocean_Server]:Communications Fault

20140817T033134 [CBIT]:Communications Fault in component: Batt_Ocean_Server

20140817T051042 [CBIT]:STOP DEPTH REACHED. Terminating Mission.#

20140817T081345 [DVL_micro]:NQ1 string checksum mismatch. Reported:99 Calculated:118

20140817T091639 [NAL9602]:Verify xmit timeout failure.

20140817T091639 [CBIT]:Data Fault in component: NAL9602

20140817T142455 [NAL9602]:NAL9602 initialize error - Can't enter command mode:##+CIEV:1,1#

20140817T142455 [NAL9602]:Communications Fault

20140817T142455 [CBIT]:Communications Fault in component: NAL9602

20140817T183311 [NAL9602]:Verify xmit timeout failure.

20140817T183311 [CBIT]:Data Fault in component: NAL9602

20140817T213739 [NAL9602]:NAL9602 initialize error - Can't enter command mode:##+CIEV:1,1#

20140817T213739 [NAL9602]:Communications Fault

20140817T213739 [CBIT]:Communications Fault in component: NAL9602

20140818T034909 [NAL9602]:Inadequate Iridium signal strength reported: 0

20140818T045305 [CBIT]:STOP DEPTH REACHED. Terminating Mission.#

20140818T045325 [CBIT]:ABORT DEPTH REACHED. ACTIVATING BURNWIRE.#

20140818T170829 [DVL_micro]:NQ1 string checksum mismatch. Reported:96 Calculated:24

20140818T170914 [DVL_micro]:DVL Failure: Failed to read in all data items. Got 45 of 46

20140818T171002 [CommandLine]:got command conversation start

20140818T171002 [CommandLine]:Conversation is started.

20140818T171016 [CommandLine]:got command restart system