daphne Path

trajectory

20140814T001034 [CBIT]:No ground fault detected

20140814T001101 [CommandLine]:Scheduling is paused

20140814T001102 [MissionManager]:Started mission Startup

20140814T001117 [CommandLine]:got command run ./Missions/Maintenance/tracking_on_surface.xml

20140814T001117 [CommandLine]:Running ./Missions/Maintenance/tracking_on_surface.xml

20140814T001137 [Depth_Keller]:Pressure reading out of range: 1011.276306 decibar

20140814T001209 [MissionManager]:Started mission tracking_on_surface

20140814T001300 [DAT]:No response from remote modem.

20140814T001310 [DVL_micro]:DVL failed to acquire valid data within timeout.

20140814T001310 [DVL_micro]:Data Fault

20140814T001311 [CBIT]:Data Fault in component: DVL_micro

20140814T001311 [DVL_micro]:LCB fault: Software Overcurrent.

20140814T001311 [DVL_micro]:Hardware Fault

20140814T001320 [DAT]:unknown deviceResponse_: #

20140814T001320 [DAT]:Communications Fault

20140814T001320 [DAT]:No response from remote modem.

20140814T001320 [CBIT]:Communications Fault in component: DAT

20140814T001400 [DAT]:No response from remote modem.

20140814T001420 [DAT]:unknown deviceResponse_: #

20140814T001420 [DAT]:Communications Fault

20140814T001421 [CBIT]:Communications Fault in component: DAT

20140814T001521 [DAT]:unknown deviceResponse_: #

20140814T001521 [DAT]:Communications Fault

20140814T001521 [CBIT]:Communications Fault in component: DAT

20140814T001524 [CommandLine]:got command stop

20140814T001525 [MissionManager]:Started mission Default

20140814T001621 [DVL_micro]:DVL failed to acquire valid data within timeout.

20140814T001621 [DVL_micro]:Data Fault

20140814T001621 [CBIT]:Data Fault in component: DVL_micro

20140814T001631 [DVL_micro]:LCB fault: Software Overcurrent.

20140814T001631 [DVL_micro]:Hardware Fault

20140814T001956 [DVL_micro]:DVL failed to acquire valid data within timeout.

20140814T001956 [DVL_micro]:Data Fault

20140814T001956 [CBIT]:Data Fault in component: DVL_micro

20140814T001958 [DVL_micro]:LCB fault: Software Overcurrent.

20140814T001958 [DVL_micro]:Hardware Fault

20140814T025934 [NAL9602]:NAL9602 initialize error - Can't enter command mode:AT-MSSTM###

20140814T025934 [NAL9602]:Communications Fault

20140814T025934 [CBIT]:Communications Fault in component: NAL9602

20140814T034137 [NAL9602]:NAL9602 initialize error - Can't enter command mode:AT-MSSTM###

20140814T034137 [NAL9602]:Communications Fault

20140814T034137 [CBIT]:Communications Fault in component: NAL9602

20140814T040040 [Depth_Keller]:Pressure reading out of range: 1830.333618 decibar

20140814T040046 [Radio_Freewave]:Starting PPPD with command:/sbin/pppd nocrtscts /dev/ttyS1 noauth 115200 10.1.1.2:10.1.1.1 persist maxfail 0

20140814T042852 [Depth_Keller]:Pressure reading out of range: 1830.343140 decibar

20140814T043643 [Radio_Freewave]:Starting PPPD with command:/sbin/pppd nocrtscts /dev/ttyS1 noauth 115200 10.1.1.2:10.1.1.1 persist maxfail 0

20140814T044843 [Radio_Freewave]:Starting PPPD with command:/sbin/pppd nocrtscts /dev/ttyS1 noauth 115200 10.1.1.2:10.1.1.1 persist maxfail 0

20140814T052609 [Depth_Keller]:Pressure reading out of range: -850.609253 decibar

20140814T052819 [Depth_Keller]:Pressure reading out of range: -850.804810 decibar

20140814T053728 [Radio_Freewave]:LCB fault: Software Overcurrent.

20140814T053728 [Radio_Freewave]:Hardware Fault

20140814T053733 [CBIT]:Hardware Fault in component: Radio_Freewave

20140814T054519 [Radio_Freewave]:LCB fault: Software Overcurrent.

20140814T054519 [Radio_Freewave]:Hardware Fault

20140814T054523 [CBIT]:Hardware Fault in component: Radio_Freewave

20140814T055644 [Depth_Keller]:Pressure reading out of range: -850.721008 decibar

20140814T061038 [CBIT]:Beginning GF scan

20140814T061401 [Radio_Freewave]:LCB fault: Software Overcurrent.

20140814T061401 [Radio_Freewave]:Hardware Fault

20140814T061405 [CBIT]:Hardware Fault in component: Radio_Freewave

20140814T063904 [Radio_Freewave]:LCB fault: Current Limiter Activated.