daphne Path

trajectory

20140812T201346 [CommandLine]:got command restart logs

20140812T201607 [DVL_micro]:DVL failed to acquire valid data within timeout.

20140812T201607 [DVL_micro]:Data Fault

20140812T201607 [CBIT]:Data Fault in component: DVL_micro

20140812T201617 [DVL_micro]:LCB fault: Software Overcurrent.

20140812T201617 [DVL_micro]:Hardware Fault

20140812T201942 [DVL_micro]:DVL failed to acquire valid data within timeout.

20140812T201942 [DVL_micro]:Data Fault

20140812T201942 [CBIT]:Data Fault in component: DVL_micro

20140812T201952 [DVL_micro]:LCB fault: Software Overcurrent.

20140812T201952 [DVL_micro]:Hardware Fault

20140812T202322 [DVL_micro]:DVL failed to acquire valid data within timeout.

20140812T202322 [DVL_micro]:Data Fault

20140812T202322 [CBIT]:Data Fault in component: DVL_micro

20140812T202332 [DVL_micro]:LCB fault: Software Overcurrent.

20140812T202332 [DVL_micro]:Hardware Fault

20140812T202617 [Depth_Keller]:Pressure reading out of range: 1830.399048 decibar

20140812T202809 [NAL9602]:Failed to initiate SBD session. Error code: 2

20140812T202900 [Depth_Keller]:Pressure reading out of range: 1830.422607 decibar

20140812T202922 [Radio_Freewave]:Starting PPPD with command:/sbin/pppd nocrtscts /dev/ttyS1 noauth 115200 10.1.1.2:10.1.1.1 persist maxfail 0

20140812T202925 [Depth_Keller]:Pressure reading out of range: -850.721008 decibar

20140812T202936 [Radio_Freewave]:Starting PPPD with command:/sbin/pppd nocrtscts /dev/ttyS1 noauth 115200 10.1.1.2:10.1.1.1 persist maxfail 0

20140812T203005 [Depth_Keller]:Pressure reading out of range: 1830.451416 decibar

20140812T203011 [Radio_Freewave]:Starting PPPD with command:/sbin/pppd nocrtscts /dev/ttyS1 noauth 115200 10.1.1.2:10.1.1.1 persist maxfail 0

20140812T203100 [Depth_Keller]:Pressure reading out of range: -850.721008 decibar

20140812T203150 [Depth_Keller]:Pressure reading out of range: -850.721008 decibar

20140812T203401 [NAL9602]:NAL9602 initialize error - Can't enter command mode:+CIEV:1,1##AT-MSSTM#

20140812T203401 [NAL9602]:Communications Fault

20140812T203401 [CBIT]:Communications Fault in component: NAL9602

20140812T203605 [NAL9602]:Failed to initiate SBD session. Error code: 2

20140812T203639 [NAL9602]:Failed to initiate SBD session. Error code: 2

20140812T210438 [NAL9602]:Verify xmit timeout failure.

20140812T210439 [CBIT]:Data Fault in component: NAL9602

20140812T224140 [NAL9602]:Verify xmit timeout failure.

20140812T224140 [CBIT]:Data Fault in component: NAL9602

20140812T224910 [DVL_micro]:DVL Failure: Failed to read in all data items. Got 45 of 46

20140812T225701 [NAL9602]:Inadequate Iridium signal strength reported: 0

20140812T225704 [NAL9602]:Inadequate Iridium signal strength reported: 0

20140812T225708 [NAL9602]:Inadequate Iridium signal strength reported: 0

20140812T232941 [CommandLine]:got command conversation stop

20140812T232941 [CommandLine]:Conversation is stopped.

20140813T002549 [DVL_micro]:LCB fault: Current Limiter Activated.

20140813T021252 [CBIT]:Beginning GF scan

20140813T033642 [Radio_Freewave]:LCB fault: Software Overcurrent.

20140813T033642 [Radio_Freewave]:Hardware Fault

20140813T033646 [CBIT]:Hardware Fault in component: Radio_Freewave

20140813T054323 [DVL_micro]:NQ1 string checksum mismatch. Reported:95 Calculated:94

20140813T080406 [DVL_micro]:LCB fault: Current Limiter Activated.

20140813T081346 [CBIT]:Beginning GF scan

20140813T111823 [AHRS_sp3003D]:LCB fault: Invalid Command. Hardware Overcurrent Shutdown. Current Limiter Activated.

20140813T111823 [CBIT]:Hardware Fault in component: AHRS_sp3003D

20140813T111833 [AHRS_sp3003D]:LCB fault: Invalid Command. Hardware Overcurrent Shutdown. Current Limiter Activated.

20140813T141431 [CBIT]:Beginning GF scan

20140813T160102 [DVL_micro]:NQ1 string checksum mismatch. Reported:91 Calculated:72

20140813T201525 [DVL_micro]:LCB fault: Current Limiter Activated.

20140813T221246 [NAL9602]:NAL9602 initialize error - Can't enter command mode:##+CIEV:1,1#

20140813T221246 [NAL9602]:Communications Fault

20140813T221246 [CBIT]:Communications Fault in component: NAL9602

20140813T233218 [DVL_micro]:DVL Failure: Failed to read in all data items. Got 45 of 46

20140813T233343 [DVL_micro]:DVL Failure: Failed to read in all data items. Got 43 of 46

20140813T233920 [CommandLine]:got command restart application