daphne Path

trajectory

20140808T110556 [MissionManager]:Started mission Startup

20140808T110736 [HFRadarModelCalc]:Forecast time 20140806T140000: published 50 modes in rows, 61 hours in columns, 3050 elements.

20140808T110738 [MissionManager]:Started mission Default

20140808T110813 [DVL_micro]:DVL failed to acquire valid data within timeout.

20140808T110813 [DVL_micro]:Data Fault

20140808T110813 [CBIT]:Data Fault in component: DVL_micro

20140808T110823 [DVL_micro]:LCB fault: Software Overcurrent.

20140808T110823 [DVL_micro]:Hardware Fault

20140808T111149 [DVL_micro]:DVL failed to acquire valid data within timeout.

20140808T111149 [DVL_micro]:Data Fault

20140808T111149 [CBIT]:Data Fault in component: DVL_micro

20140808T111158 [DVL_micro]:LCB fault: Software Overcurrent.

20140808T111158 [DVL_micro]:Hardware Fault

20140808T111317 [HFRadarModelCalc]:Forecast time 20140806T140000: published 50 modes in rows, 61 hours in columns, 3050 elements.

20140808T111529 [DVL_micro]:DVL failed to acquire valid data within timeout.

20140808T111529 [DVL_micro]:Data Fault

20140808T111529 [CBIT]:Data Fault in component: DVL_micro

20140808T111539 [DVL_micro]:LCB fault: Software Overcurrent.

20140808T111539 [DVL_micro]:Hardware Fault

20140808T111831 [DVL_micro]:DVL Failure: Failed to read in all data items. Got 22 of 46

20140808T112336 [HFRadarModelCalc]:Forecast time 20140806T140000: published 50 modes in rows, 61 hours in columns, 3050 elements.

20140808T112850 [NAL9602]:GPS failed to acquire within timeout.

20140808T112850 [CBIT]:Data Fault in component: NAL9602

20140808T112935 [NAL9602]:Failed to initiate SBD session. Error code: 2

20140808T113029 [NAL9602]:Failed to initiate SBD session. Error code: 2

20140808T120028 [DVL_micro]:NQ1 string checksum mismatch. Reported:97 Calculated:119

20140808T130019 [DVL_micro]:LCB fault: Current Limiter Activated.

20140808T134138 [NAL9602]:NAL9602 initialize error - Can't enter command mode:##+CIEV:1,1#

20140808T134138 [NAL9602]:Communications Fault

20140808T134138 [CBIT]:Communications Fault in component: NAL9602

20140808T140002 [NAL9602]:Failed to initiate SBD session. Error code: 2

20140808T142940 [NAL9602]:NAL9602 initialize uart error: serial timeout

20140808T142940 [NAL9602]:Communications Fault

20140808T142940 [CBIT]:Communications Fault in component: NAL9602

20140808T143737 [NAL9602]:NAL9602 initialize error - Can't enter command mode:##+CIEV:1,1#

20140808T143737 [NAL9602]:Communications Fault

20140808T143737 [CBIT]:Communications Fault in component: NAL9602

20140808T154509 [Depth_Keller]:Pressure reading out of range: 1830.326538 decibar

20140808T154514 [Radio_Freewave]:Starting PPPD with command:/sbin/pppd nocrtscts /dev/ttyS1 noauth 115200 10.1.1.2:10.1.1.1 persist maxfail 0

20140808T161010 [Depth_Keller]:Pressure reading out of range: 1372.646729 decibar

20140808T161015 [Radio_Freewave]:Starting PPPD with command:/sbin/pppd nocrtscts /dev/ttyS1 noauth 115200 10.1.1.2:10.1.1.1 persist maxfail 0

20140808T161915 [Depth_Keller]:Pressure reading out of range: 1830.344971 decibar

20140808T162815 [Radio_Freewave]:Starting PPPD with command:/sbin/pppd nocrtscts /dev/ttyS1 noauth 115200 10.1.1.2:10.1.1.1 persist maxfail 0

20140808T170134 [Depth_Keller]:Pressure reading out of range: -850.776855 decibar

20140808T170530 [CBIT]:Beginning GF scan

20140808T171006 [Radio_Freewave]:LCB fault: Software Overcurrent.

20140808T171006 [Radio_Freewave]:Hardware Fault

20140808T171011 [CBIT]:Hardware Fault in component: Radio_Freewave

20140808T171040 [CBIT]:STOP DEPTH REACHED. Terminating Mission.#

20140808T171100 [CBIT]:ABORT DEPTH REACHED. ACTIVATING BURNWIRE.#

20140808T171100 [CBIT]:STOP DEPTH REACHED. Terminating Mission.#

20140808T172127 [Depth_Keller]:Pressure reading out of range: -850.776855 decibar

20140808T172614 [NAL9602]:NAL9602 initialize error - Can't enter command mode:+SBDLOE:0,0###

20140808T175214 [DVL_micro]:DVL Failure: Failed to read in all data items. Got 45 of 46

20140808T190621 [NAL9602]:NAL9602 initialize error - Can't enter command mode:##+CIEV:0,4#

20140808T191438 [NAL9602]:NAL9602 initialize error - Can't enter command mode:+CIEV:0,5###

20140808T193325 [NAL9602]:NAL9602 initialize error - Can't enter command mode:+CIEV:0,4###

20140808T194752 [NAL9602]:NAL9602 initialize error - Can't enter command mode:-MSSTM: 9b1b01a9###

20140808T230621 [CBIT]:Beginning GF scan

20140809T013518 [DVL_micro]:No DVL communication! Re-initializing

20140809T013518 [DVL_micro]:Communications Fault

20140809T013518 [CBIT]:Communications Fault in component: DVL_micro

20140809T022019 [DVL_micro]:No DVL communication! Re-initializing

20140809T022019 [DVL_micro]:Communications Fault

20140809T022019 [CBIT]:Communications Fault in component: DVL_micro

20140809T030324 [NAL9602]:NAL9602 initialize error - Can't enter command mode:AT-MSSTM###

20140809T034150 [NAL9602]:NAL9602 initialize error - Can't enter command mode:##-MSSTM: no network service#

20140809T034459 [Depth_Keller]:Pressure reading out of range: -850.609253 decibar

20140809T035005 [Radio_Freewave]:LCB fault: Software Overcurrent.

20140809T035005 [Radio_Freewave]:Hardware Fault

20140809T035009 [CBIT]:Hardware Fault in component: Radio_Freewave

20140809T040344 [Radio_Freewave]:LCB fault: Software Overcurrent.

20140809T040344 [Radio_Freewave]:Hardware Fault

20140809T040348 [CBIT]:Hardware Fault in component: Radio_Freewave

20140809T050522 [Batt_Ocean_Server]:Battery controller A communication timeout. Re-initializing

20140809T050522 [Batt_Ocean_Server]:Communications Fault

20140809T050524 [Batt_Ocean_Server]:Batt_Ocean_Server A initialization uart error: serial timeout

20140809T050524 [Batt_Ocean_Server]:Ocean Server Batteries failed to initialize. Re-initializing

20140809T050524 [CBIT]:Communications Fault in component: Batt_Ocean_Server

20140809T050701 [CBIT]:Beginning GF scan

20140809T090658 [NAL9602]:NAL9602 initialize error - Can't enter command mode:+SBDLOE:0,0###

20140809T095142 [NAL9602]:NAL9602 initialize uart error: serial timeout

20140809T104954 [NAL9602]:MT Queue status failed to be acquired within timeout. Will not retry this session.

20140809T105529 [NAL9602]:GPS failed to acquire within timeout.

20140809T105529 [CBIT]:Data Fault in component: NAL9602

20140809T145343 [NAL9602]:NAL9602 initialize uart error: serial timeout

20140809T182502 [AHRS_sp3003D]:LCB fault: Invalid Command. Hardware Overcurrent Shutdown. Current Limiter Activated.

20140809T182503 [CBIT]:Hardware Fault in component: AHRS_sp3003D

20140809T182512 [AHRS_sp3003D]:LCB fault: Invalid Command. Hardware Overcurrent Shutdown. Current Limiter Activated.

20140809T191524 [DVL_micro]:No DVL communication! Re-initializing

20140809T191524 [DVL_micro]:Communications Fault

20140809T191524 [CBIT]:Communications Fault in component: DVL_micro

20140809T213244 [NAL9602]:NAL9602 initialize error - Can't enter command mode:-MSSTM: no network service###

20140809T220646 [NAL9602]:NAL9602 initialize error - Can't enter command mode:##-MSSTM: no network service#

20140809T230156 [NAL9602]:MT Queue status failed to be acquired within timeout. Will not retry this session.

20140809T230808 [NAL9602]:GPS failed to acquire within timeout.

20140809T230808 [CBIT]:Data Fault in component: NAL9602

20140809T230857 [NAL9602]:Failed to receive proper response when querying signal strength for MT queue check. no error

20140809T235007 [DVL_micro]:LCB fault: Current Limiter Activated.

20140810T005650 [NAL9602]:NAL9602 initialize error - Can't enter command mode:##-MSSTM: no network service#

20140810T020340 [VerticalControl]:Excessive depth excursion=14.349213 m, failToGoUpDepth_=96.400673 m, depthRate=0.271198 m/s, pitch=2.726445 deg.

20140810T022437 [CBIT]:STOP DEPTH REACHED. Terminating Mission.#

20140810T023148 [CBIT]:ABORT DEPTH REACHED. ACTIVATING BURNWIRE.#

20140810T023814 [CBIT]:ABORT DEPTH REACHED. ACTIVATING BURNWIRE.#

20140810T023824 [VerticalControl]:Excessive depth excursion=22.903030 m, failToGoUpDepth_=130.191742 m, depthRate=0.395180 m/s, pitch=2.616582 deg.

20140810T035305 [DVL_micro]:LCB fault: Current Limiter Activated.

20140810T100718 [NAL9602]:NAL9602 initialize error - Can't enter command mode:-MSSTM: no network service###

20140810T102857 [NAL9602]:NAL9602 initialize error - Can't enter command mode:-MSSTM: 9b329e24###

20140810T145136 [DVL_micro]:DVL Failure: Failed to read in all data items. Got 45 of 46

20140810T145745 [NAL9602]:NAL9602 initialize error - Can't enter command mode:+SBDLOE:0,0###

20140810T165435 [VerticalControl]:Excessive depth excursion=14.663780 m, failToGoUpDepth_=98.012245 m, depthRate=0.266744 m/s, pitch=2.638555 deg.

20140810T222827 [NAL9602]:MT Queue status failed to be acquired within timeout. Will not retry this session.

20140810T223552 [NAL9602]:Failed to receive proper response when querying signal strength for MT queue check. no error

20140810T234349 [NAL9602]:NAL9602 initialize error - Can't enter command mode:+CIEV:1,1##AT-MSSTM#

20140811T184821 [NAL9602]:NAL9602 initialize error - Can't enter command mode:AT-MSSTM###

20140811T190830 [DVL_micro]:NQ1 string checksum mismatch. Reported:109 Calculated:113

20140811T203247 [DVL_micro]:NQ1 string checksum mismatch. Reported:108 Calculated:119