daphne Path

trajectory

20140413T191102 [CBIT]:No ground fault detected

20140413T191130 [MissionManager]:Started mission Startup

20140413T191141 [CommandLine]:got command failComponent

20140413T191141 [CommandLine]:Failed components:

20140413T191141 [CommandLine]:No failed Components.

20140413T191149 [CommandLine]:got command failComponent

20140413T191149 [CommandLine]:Failed components:

20140413T191149 [CommandLine]:No failed Components.

20140413T191206 [NAL9602]:Failed to initiate SBD session. Error code: 2

20140413T191303 [MissionManager]:Started mission Default

20140413T191325 [DVL_micro]:DVL failed to acquire valid data within timeout.

20140413T191325 [DVL_micro]:Data Fault

20140413T191325 [CBIT]:Data Fault in component: DVL_micro

20140413T191326 [DVL_micro]:LCB fault: Software Overcurrent.

20140413T191326 [DVL_micro]:Hardware Fault

20140413T191350 [NAL9602]:Failed to initiate SBD session. Error code: 2

20140413T191352 [DVL_micro]:DVL Failure: Failed to read in all data items. Got 45 of 46

20140413T191423 [NAL9602]:Failed to initiate SBD session. Error code: 2

20140413T191640 [DVL_micro]:DVL failed to acquire valid data within timeout.

20140413T191640 [DVL_micro]:Data Fault

20140413T191640 [CBIT]:Data Fault in component: DVL_micro

20140413T191650 [DVL_micro]:LCB fault: Software Overcurrent.

20140413T191650 [DVL_micro]:Hardware Fault

20140413T191839 [DVL_micro]:No DVL communication! Re-initializing

20140413T191839 [DVL_micro]:Communications Fault

20140413T191839 [CBIT]:Communications Fault in component: DVL_micro

20140413T191840 [DVL_micro]:LCB fault: Software Overcurrent.

20140413T191840 [DVL_micro]:Hardware Fault

20140413T192021 [DVL_micro]:DVL failed to acquire valid data within timeout.

20140413T192021 [DVL_micro]:Data Fault

20140413T192021 [CBIT]:Data Fault in component: DVL_micro

20140413T192911 [DVL_micro]:DVL Failure: Failed to read in all data items. Got 44 of 46

20140413T192925 [DVL_micro]:DVL Failure: Failed to read in all data items. Got 43 of 46

20140413T195026 [DVL_micro]:NQ1 string checksum mismatch. Reported:112 Calculated:102

20140413T200937 [DVL_micro]:LCB fault: Current Limiter Activated.

20140413T203347 [DVL_micro]:No DVL communication! Re-initializing

20140413T203347 [DVL_micro]:Communications Fault

20140413T203347 [CBIT]:Communications Fault in component: DVL_micro

20140413T210151 [NAL9602]:NAL9602 initialize error - Can't enter command mode:##+CIEV:1,1#

20140413T210151 [NAL9602]:Communications Fault

20140413T210151 [CBIT]:Communications Fault in component: NAL9602

20140413T210209 [NAL9602]:NAL9602 initialize error - Can't enter command mode:##+CIEV:0,5#

20140413T210209 [NAL9602]:Communications Fault

20140413T210209 [CBIT]:Communications Fault in component: NAL9602

20140413T210209 [CommandLine]:Scheduling is paused

20140413T211301 [DVL_micro]:No DVL communication! Re-initializing

20140413T211301 [DVL_micro]:Communications Fault

20140413T211301 [CBIT]:Communications Fault in component: DVL_micro

20140413T220706 [NAL9602]:NAL9602 initialize error - Can't enter command mode:AT-MSSTM###

20140413T220706 [NAL9602]:Communications Fault

20140413T220706 [CBIT]:Communications Fault in component: NAL9602

20140413T223946 [NAL9602]:NAL9602 initialize error - Can't enter command mode:AT-MSSTM###

20140413T233358 [DVL_micro]:NQ1 string checksum mismatch. Reported:73 Calculated:69

20140413T233402 [NAL9602]:NAL9602 initialize error - Can't enter command mode:AT-MSSTM###

20140413T235030 [NAL9602]:NAL9602 initialize error - Can't enter command mode:-MSSTM: no network service###

20140413T235202 [DVL_micro]:NQ1 string checksum mismatch. Reported:73 Calculated:95

20140414T002633 [Radio_Freewave]:LCB fault: Invalid Command. Hardware Overcurrent Shutdown. Current Limiter Activated.

20140414T002633 [Radio_Freewave]:Hardware Fault

20140414T002633 [CBIT]:Hardware Fault in component: Radio_Freewave

20140414T002643 [Radio_Freewave]:LCB fault: Software Overcurrent.

20140414T002654 [Radio_Freewave]:Starting PPPD with command:/sbin/pppd nocrtscts /dev/ttyS1 noauth 115200 10.1.1.2:10.1.1.1 persist maxfail 0

20140414T003948 [NAL9602]:NAL9602 initialize error - Can't enter command mode:+CIEV:1,1##AT-MSSTM#

20140414T011105 [CBIT]:Beginning GF scan

20140414T011819 [NAL9602]:NAL9602 initialize error - Can't enter command mode:+CIEV:1,1##AT-MSSTM#

20140414T015703 [NAL9602]:NAL9602 initialize uart error: serial timeout

20140414T015721 [NAL9602]:NAL9602 initialize error - Can't enter command mode:##+CIEV:1,1#

20140414T031349 [CBIT]:Humidity exceeds 50% of running average: Humidity:10 %. Average:6.410000

20140414T040447 [DVL_micro]:LCB fault: Current Limiter Activated.

20140414T040942 [NAL9602]:NAL9602 initialize uart error: serial timeout

20140414T044306 [NAL9602]:NAL9602 initialize error - Can't enter command mode:-MSSTM: no network service###

20140414T053321 [Batt_Ocean_Server]:Battery controller A communication timeout. Re-initializing

20140414T053321 [Batt_Ocean_Server]:Communications Fault

20140414T053323 [CBIT]:Communications Fault in component: Batt_Ocean_Server

20140414T053910 [NAL9602]:NAL9602 initialize error - Can't enter command mode:+CIEV:0,2##AT-MSSTM#

20140414T061633 [Depth_Keller]:Pressure reading out of range: 1830.398193 decibar

20140414T062223 [Depth_Keller]:Pressure reading out of range: 1830.440063 decibar

20140414T062659 [Depth_Keller]:Pressure reading out of range: 1830.412109 decibar

20140414T070348 [Batt_Ocean_Server]:Battery controller A communication timeout. Re-initializing

20140414T070349 [Batt_Ocean_Server]:Communications Fault

20140414T070351 [CBIT]:Communications Fault in component: Batt_Ocean_Server

20140414T071154 [CBIT]:Beginning GF scan

20140414T071219 [Radio_Freewave]:Starting PPPD with command:/sbin/pppd nocrtscts /dev/ttyS1 noauth 115200 10.1.1.2:10.1.1.1 persist maxfail 0

20140414T073052 [Depth_Keller]:Pressure reading out of range: -850.609253 decibar

20140414T074329 [DVL_micro]:LCB fault: Current Limiter Activated.

20140414T084634 [NAL9602]:NAL9602 initialize error - Can't enter command mode:-MSSTM: no network service###

20140414T095025 [Batt_Ocean_Server]:Battery controller A communication timeout. Re-initializing

20140414T095026 [Batt_Ocean_Server]:Communications Fault

20140414T095028 [CBIT]:Communications Fault in component: Batt_Ocean_Server

20140414T103645 [NAL9602]:NAL9602 initialize error - Can't enter command mode:+SBDLOE:0,0###

20140414T123834 [NAL9602]:NAL9602 initialize error - Can't enter command mode:+CIEV:0,4###

20140414T131253 [CBIT]:Beginning GF scan

20140414T131318 [Radio_Freewave]:Starting PPPD with command:/sbin/pppd nocrtscts /dev/ttyS1 noauth 115200 10.1.1.2:10.1.1.1 persist maxfail 0

20140414T154101 [NAL9602]:NAL9602 initialize error - Can't enter command mode:+CIEV:0,3###

20140414T154102 [NAL9602]:LCB fault: Current Limiter Activated.

20140414T154119 [NAL9602]:NAL9602 initialize uart error: serial timeout

20140414T165720 [NAL9602]:NAL9602 initialize error - Can't enter command mode:##-MSSTM: no network service#

20140414T182311 [Depth_Keller]:Pressure reading out of range: -850.721008 decibar

20140414T183107 [Depth_Keller]:Pressure reading out of range: -850.693054 decibar

20140414T185631 [Radio_Freewave]:LCB fault: Invalid Command. Hardware Overcurrent Shutdown. Current Limiter Activated.

20140414T185631 [Radio_Freewave]:Hardware Fault

20140414T185631 [CBIT]:Hardware Fault in component: Radio_Freewave

20140414T185641 [Radio_Freewave]:LCB fault: Software Overcurrent.

20140414T214255 [NAL9602]:NAL9602 initialize error - Can't enter command mode:##-MSSTM: no network service#

20140414T221222 [NAL9602]:MT Queue status failed to be acquired within timeout. Will not retry this session.

20140414T221356 [NAL9602]:Failed to receive proper response when querying signal strength for MT queue check. no error

20140414T221356 [CBIT]:Data Fault in component: NAL9602

20140414T221608 [NAL9602]:NAL9602 initialize error - Can't enter command mode:-MSSTM: 94794a3f###

20140414T223036 [NAL9602]:MT Queue status failed to be acquired within timeout. Will not retry this session.

20140414T223214 [NAL9602]:Failed to receive proper response when querying signal strength for MT queue check. no error

20140414T223214 [CBIT]:Data Fault in component: NAL9602

20140415T000243 [NAL9602]:MT Queue status failed to be acquired within timeout. Will not retry this session.

20140415T000410 [NAL9602]:Failed to receive proper response when querying signal strength for MT queue check. no error

20140415T000411 [CBIT]:Data Fault in component: NAL9602

20140415T081032 [NAL9602]:NAL9602 initialize error - Can't enter command mode:+CIEV:0,3###

20140415T174657 [NAL9602]:NAL9602 initialize error - Can't enter command mode:##-MSSTM: no network service#

20140415T222643 [AHRS_sp3003D]:readHeadingMagBin UART error: serial timeout

20140415T222643 [AHRS_sp3003D]:Read Heading/Pitch/Roll Failure.

20140415T222643 [AHRS_sp3003D]:Communications Fault

20140415T222643 [CBIT]:Communications Fault in component: AHRS_sp3003D

20140416T050727 [AHRS_sp3003D]:LCB fault: Invalid Command. Hardware Overcurrent Shutdown. Current Limiter Activated.

20140416T050727 [CBIT]:Hardware Fault in component: AHRS_sp3003D

20140416T050737 [AHRS_sp3003D]:LCB fault: Invalid Command. Hardware Overcurrent Shutdown. Current Limiter Activated.