2013-12-16T21:15:49.279Z,1387228549.279 [Supervisor](DEBUG): Initializing supervisor.
2013-12-16T21:15:49.285Z,1387228549.285 [SyncHandler](DEBUG): Created PCaller Thread at 4033B4E0
2013-12-16T21:15:49.286Z,1387228549.286 [ComponentRegistry](DEBUG): Component "controlThread" handled in its own thread.
2013-12-16T21:15:49.289Z,1387228549.289 [controlThread ThreadHandler](DEBUG): Created PCaller Thread at 4036B4E0
2013-12-16T21:15:49.292Z,1387228549.292 [ComponentRegistry](DEBUG): SyncComponent "CycleStarter" handled in the control thread.
2013-12-16T21:15:49.303Z,1387228549.303 [ComponentRegistry](DEBUG): Component "CommandLine" handled in its own thread.
2013-12-16T21:15:49.305Z,1387228549.305 [CommandLine ThreadHandler](DEBUG): Created PCaller Thread at 4039B4E0
2013-12-16T21:15:49.306Z,1387228549.306 [ComponentRegistry](DEBUG): Component "logger" handled in its own thread.
2013-12-16T21:15:49.309Z,1387228549.309 [logger ThreadHandler](DEBUG): Created PCaller Thread at 403CB4E0
2013-12-16T21:15:49.311Z,1387228549.311 [ComponentRegistry](DEBUG): SyncComponent "LogSplitter" handled in the control thread.
2013-12-16T21:15:49.312Z,1387228549.312 [Supervisor](INFO): Looking for Config files in directory: Config/
2013-12-16T21:15:49.316Z,1387228549.316 [Supervisor](INFO): Opening Config file at: Config/vehicle.cfg
2013-12-16T21:15:49.641Z,1387228549.641 [ComponentRegistry](DEBUG): Loaded Config Component "Config/vehicle
2013-12-16T21:15:49.642Z,1387228549.642 [Supervisor](INFO): Opening Config file at: Config/Sensor.cfg
2013-12-16T21:15:49.871Z,1387228549.871 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Sensor
2013-12-16T21:15:49.871Z,1387228549.871 [Supervisor](INFO): Opening Config file at: Config/Sample.cfg
2013-12-16T21:15:49.969Z,1387228549.969 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Sample
2013-12-16T21:15:49.972Z,1387228549.972 [Supervisor](INFO): Opening Config file at: Config/logger.cfg
2013-12-16T21:15:50.107Z,1387228550.107 [ComponentRegistry](DEBUG): Loaded Config Component "Config/logger
2013-12-16T21:15:50.108Z,1387228550.108 [Supervisor](INFO): Opening Config file at: Config/BIT.cfg
2013-12-16T21:15:50.271Z,1387228550.271 [ComponentRegistry](DEBUG): Loaded Config Component "Config/BIT
2013-12-16T21:15:50.273Z,1387228550.273 [Supervisor](INFO): Opening Config file at: Config/Servo.cfg
2013-12-16T21:15:50.550Z,1387228550.550 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Servo
2013-12-16T21:15:50.551Z,1387228550.551 [Supervisor](INFO): Opening Config file at: Config/Science.cfg
2013-12-16T21:15:50.742Z,1387228550.742 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Science
2013-12-16T21:15:50.745Z,1387228550.745 [Supervisor](INFO): Opening Config file at: Config/Control.cfg
2013-12-16T21:15:51.053Z,1387228551.053 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Control
2013-12-16T21:15:51.055Z,1387228551.055 [Supervisor](INFO): Opening Config file at: Config/workSite.cfg
2013-12-16T21:15:51.172Z,1387228551.172 [ComponentRegistry](DEBUG): Loaded Config Component "Config/workSite
2013-12-16T21:15:51.173Z,1387228551.173 [Supervisor](INFO): Opening Config file at: Config/Simulator.cfg
2013-12-16T21:15:51.676Z,1387228551.676 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Simulator
2013-12-16T21:15:51.677Z,1387228551.677 [Supervisor](INFO): Opening Config file at: Config/Derivation.cfg
2013-12-16T21:15:51.806Z,1387228551.806 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Derivation
2013-12-16T21:15:51.806Z,1387228551.806 [Supervisor](INFO): Opening Config file at: Config/Guidance.cfg
2013-12-16T21:15:51.905Z,1387228551.905 [Supervisor](INFO): Opening Config file at: Config/secure.cfg
2013-12-16T21:15:52.016Z,1387228552.016 [ComponentRegistry](DEBUG): Loaded Config Component "Config/secure
2013-12-16T21:15:52.018Z,1387228552.018 [Supervisor](INFO): Looking for Config files in directory: Config/lrauv-daphne/
2013-12-16T21:15:52.023Z,1387228552.023 [Supervisor](INFO): Opening Config file at: Config/lrauv-daphne/vehicle.cfg
2013-12-16T21:15:52.132Z,1387228552.132 [Supervisor](INFO): Opening Config file at: Config/lrauv-daphne/Sensor.cfg
2013-12-16T21:15:52.279Z,1387228552.279 [Supervisor](INFO): Opening Config file at: Config/lrauv-daphne/logger.cfg
2013-12-16T21:15:52.390Z,1387228552.390 [Supervisor](INFO): Opening Config file at: Config/lrauv-daphne/BIT.cfg
2013-12-16T21:15:52.507Z,1387228552.507 [Supervisor](INFO): Opening Config file at: Config/lrauv-daphne/Servo.cfg
2013-12-16T21:15:52.615Z,1387228552.615 [Supervisor](INFO): Opening Config file at: Config/lrauv-daphne/Science.cfg
2013-12-16T21:15:52.747Z,1387228552.747 [Supervisor](INFO): Opening Config file at: Config/lrauv-daphne/Control.cfg
2013-12-16T21:15:52.855Z,1387228552.855 [Supervisor](INFO): Opening Config file at: Config/lrauv-daphne/Simulator.cfg
2013-12-16T21:15:52.954Z,1387228552.954 [Supervisor](INFO): Opening Config file at: Config/lrauv-daphne/secure.cfg
2013-12-16T21:15:53.070Z,1387228553.070 [Supervisor](FAULT): Ignoring configuration overrides from Data/persisted.cfg
2013-12-16T21:15:53.196Z,1387228553.196 [Module Loader](DEBUG): Loading Module at Modules/Simulator.so
2013-12-16T21:15:53.431Z,1387228553.431 [InternalSim] Loaded
2013-12-16T21:15:53.431Z,1387228553.431 [ComponentRegistry](DEBUG): SyncComponent "InternalSim" handled in the control thread.
2013-12-16T21:15:53.432Z,1387228553.432 [Module Loader](DEBUG): Loaded Module: Simulator (This is the module containing the Simulator)
2013-12-16T21:15:53.432Z,1387228553.432 [Module Loader](DEBUG): Loading Module at Modules/BIT.so
2013-12-16T21:15:53.559Z,1387228553.559 [SBIT](DEBUG): Construct Startup Built In Test.
2013-12-16T21:15:53.594Z,1387228553.594 [SBIT] Loaded
2013-12-16T21:15:53.594Z,1387228553.594 [ComponentRegistry](DEBUG): SyncComponent "SBIT" handled in the control thread.
2013-12-16T21:15:53.595Z,1387228553.595 [IBIT](DEBUG): Construct Initiated Built In Test.
2013-12-16T21:15:53.624Z,1387228553.624 [IBIT] Loaded
2013-12-16T21:15:53.625Z,1387228553.625 [ComponentRegistry](DEBUG): SyncComponent "IBIT" handled in the control thread.
2013-12-16T21:15:53.627Z,1387228553.627 [CBIT](DEBUG): Construct CBIT Built In Test.
2013-12-16T21:15:53.763Z,1387228553.763 [CBIT] Loaded
2013-12-16T21:15:53.763Z,1387228553.763 [ComponentRegistry](DEBUG): SyncComponent "CBIT" handled in the control thread.
2013-12-16T21:15:53.764Z,1387228553.764 [Module Loader](DEBUG): Loaded Module: BIT (Contains the BuiltInTest components, such as C Built In Test)
2013-12-16T21:15:53.765Z,1387228553.765 [Module Loader](DEBUG): Loading Module at Modules/Servo.so
2013-12-16T21:15:53.966Z,1387228553.966 [BuoyancyServo] Loaded
2013-12-16T21:15:53.966Z,1387228553.966 [ComponentRegistry](DEBUG): SyncComponent "BuoyancyServo" handled in the control thread.
2013-12-16T21:15:53.978Z,1387228553.978 [ElevatorServo] Loaded
2013-12-16T21:15:53.979Z,1387228553.979 [ComponentRegistry](DEBUG): SyncComponent "ElevatorServo" handled in the control thread.
2013-12-16T21:15:53.995Z,1387228553.995 [MassServo] Loaded
2013-12-16T21:15:53.995Z,1387228553.995 [ComponentRegistry](DEBUG): SyncComponent "MassServo" handled in the control thread.
2013-12-16T21:15:54.007Z,1387228554.007 [RudderServo] Loaded
2013-12-16T21:15:54.007Z,1387228554.007 [ComponentRegistry](DEBUG): SyncComponent "RudderServo" handled in the control thread.
2013-12-16T21:15:54.018Z,1387228554.018 [ThrusterServo] Loaded
2013-12-16T21:15:54.019Z,1387228554.019 [ComponentRegistry](DEBUG): SyncComponent "ThrusterServo" handled in the control thread.
2013-12-16T21:15:54.019Z,1387228554.019 [Module Loader](DEBUG): Loaded Module: Servo (This is the module containing motor controllers)
2013-12-16T21:15:54.020Z,1387228554.020 [Module Loader](DEBUG): Loading Module at Modules/Derivation.so
2013-12-16T21:15:54.081Z,1387228554.081 [DepthRateCalculator] Loaded
2013-12-16T21:15:54.081Z,1387228554.081 [ComponentRegistry](DEBUG): SyncComponent "DepthRateCalculator" handled in the control thread.
2013-12-16T21:15:57.020Z,1387228557.020 [HFRadarModelCalc] Loaded
2013-12-16T21:15:57.020Z,1387228557.020 [ComponentRegistry](DEBUG): SyncComponent "HFRadarModelCalc" handled in the control thread.
2013-12-16T21:15:57.040Z,1387228557.040 [NavChart] Loaded
2013-12-16T21:15:57.041Z,1387228557.041 [ComponentRegistry](DEBUG): SyncComponent "NavChart" handled in the control thread.
2013-12-16T21:15:57.047Z,1387228557.047 [PitchRateCalculator] Loaded
2013-12-16T21:15:57.047Z,1387228557.047 [ComponentRegistry](DEBUG): SyncComponent "PitchRateCalculator" handled in the control thread.
2013-12-16T21:15:57.058Z,1387228557.058 [SpeedCalculator] Loaded
2013-12-16T21:15:57.058Z,1387228557.058 [ComponentRegistry](DEBUG): SyncComponent "SpeedCalculator" handled in the control thread.
2013-12-16T21:15:57.079Z,1387228557.079 [TempGradientCalculator] Loaded
2013-12-16T21:15:57.080Z,1387228557.080 [ComponentRegistry](DEBUG): SyncComponent "TempGradientCalculator" handled in the control thread.
2013-12-16T21:15:57.085Z,1387228557.085 [YawRateCalculator] Loaded
2013-12-16T21:15:57.086Z,1387228557.086 [ComponentRegistry](DEBUG): SyncComponent "YawRateCalculator" handled in the control thread.
2013-12-16T21:15:57.142Z,1387228557.142 [Navigation] Loaded
2013-12-16T21:15:57.142Z,1387228557.142 [ComponentRegistry](DEBUG): SyncComponent "Navigation" handled in the control thread.
2013-12-16T21:15:57.142Z,1387228557.142 [Module Loader](DEBUG): Loaded Module: Derivation (Contains the base derivation components)
2013-12-16T21:15:57.143Z,1387228557.143 [Module Loader](DEBUG): Loading Module at Modules/Guidance.so
2013-12-16T21:15:57.466Z,1387228557.466 [Module Loader](DEBUG): Loaded Module: Guidance (Contains behaviors and commands)
2013-12-16T21:15:57.467Z,1387228557.467 [Module Loader](DEBUG): Loading Module at Modules/Trigger.so
2013-12-16T21:15:57.508Z,1387228557.508 [Module Loader](DEBUG): Loaded Module: Trigger (Contains triggers for use in missions)
2013-12-16T21:15:57.508Z,1387228557.508 [Module Loader](DEBUG): Loading Module at Modules/Control.so
2013-12-16T21:15:57.583Z,1387228557.583 [VerticalControl](DEBUG): Construct VerticalControl.
2013-12-16T21:15:57.689Z,1387228557.689 [VerticalControl] Loaded
2013-12-16T21:15:57.689Z,1387228557.689 [ComponentRegistry](DEBUG): SyncComponent "VerticalControl" handled in the control thread.
2013-12-16T21:15:57.694Z,1387228557.694 [HorizontalControl](DEBUG): Construct HorizontalControl.
2013-12-16T21:15:57.762Z,1387228557.762 [HorizontalControl] Loaded
2013-12-16T21:15:57.763Z,1387228557.763 [ComponentRegistry](DEBUG): SyncComponent "HorizontalControl" handled in the control thread.
2013-12-16T21:15:57.763Z,1387228557.763 [SpeedControl](DEBUG): Construct SpeedControl.
2013-12-16T21:15:57.765Z,1387228557.765 [SpeedControl] Loaded
2013-12-16T21:15:57.765Z,1387228557.765 [ComponentRegistry](DEBUG): SyncComponent "SpeedControl" handled in the control thread.
2013-12-16T21:15:57.766Z,1387228557.766 [LoopControl](DEBUG): Construct LoopControl.
2013-12-16T21:15:57.767Z,1387228557.767 [LoopControl] Loaded
2013-12-16T21:15:57.767Z,1387228557.767 [ComponentRegistry](DEBUG): SyncComponent "LoopControl" handled in the control thread.
2013-12-16T21:15:57.767Z,1387228557.767 [Module Loader](DEBUG): Loaded Module: Control (Contains the Control components, such as Depth, Heading, and Speed Control)
2013-12-16T21:15:57.768Z,1387228557.768 [Module Loader](DEBUG): Loading Module at Modules/Sample.so
2013-12-16T21:15:57.777Z,1387228557.777 [AsyncPiEstimator](DEBUG): Construct AsyncPiEstimator.
2013-12-16T21:15:57.782Z,1387228557.782 [AsyncPiEstimator] Loaded
2013-12-16T21:15:57.782Z,1387228557.782 [ComponentRegistry](DEBUG): Component "AsyncPiEstimator" handled in its own thread.
2013-12-16T21:15:57.786Z,1387228557.786 [AsyncPiEstimator ThreadHandler](DEBUG): Created PCaller Thread at 406474E0
2013-12-16T21:15:57.787Z,1387228557.787 [Module Loader](DEBUG): Loaded Module: Sample (This is a Sample Module of Sample Components)
2013-12-16T21:15:57.787Z,1387228557.787 [Module Loader](DEBUG): Loading Module at Modules/Sensor.so
2013-12-16T21:15:58.276Z,1387228558.276 [AHRS_sp3003D] Loaded
2013-12-16T21:15:58.276Z,1387228558.276 [ComponentRegistry](DEBUG): SyncComponent "AHRS_sp3003D" handled in the control thread.
2013-12-16T21:15:58.481Z,1387228558.481 [DataOverHttps] Loaded
2013-12-16T21:15:58.481Z,1387228558.481 [ComponentRegistry](DEBUG): SyncComponent "DataOverHttps" handled in the control thread.
2013-12-16T21:15:58.495Z,1387228558.495 [Depth_Keller] Loaded
2013-12-16T21:15:58.496Z,1387228558.496 [ComponentRegistry](DEBUG): SyncComponent "Depth_Keller" handled in the control thread.
2013-12-16T21:15:58.709Z,1387228558.709 [DVL_micro] Loaded
2013-12-16T21:15:58.709Z,1387228558.709 [ComponentRegistry](DEBUG): Component "DVL_micro" handled in its own thread.
2013-12-16T21:15:58.711Z,1387228558.711 [DVL_micro ThreadHandler](DEBUG): Created PCaller Thread at 408554E0
2013-12-16T21:15:58.816Z,1387228558.816 [NAL9602] Loaded
2013-12-16T21:15:58.817Z,1387228558.817 [ComponentRegistry](DEBUG): SyncComponent "NAL9602" handled in the control thread.
2013-12-16T21:15:58.868Z,1387228558.868 [Onboard] Loaded
2013-12-16T21:15:58.868Z,1387228558.868 [ComponentRegistry](DEBUG): SyncComponent "Onboard" handled in the control thread.
2013-12-16T21:15:58.875Z,1387228558.875 [Radio_Freewave] Loaded
2013-12-16T21:15:58.875Z,1387228558.875 [ComponentRegistry](DEBUG): SyncComponent "Radio_Freewave" handled in the control thread.
2013-12-16T21:15:59.042Z,1387228559.042 [DAT] Loaded
2013-12-16T21:15:59.042Z,1387228559.042 [ComponentRegistry](DEBUG): SyncComponent "DAT" handled in the control thread.
2013-12-16T21:15:59.043Z,1387228559.043 [Module Loader](DEBUG): Loaded Module: Sensor (Contains the sensor components)
2013-12-16T21:15:59.043Z,1387228559.043 [Module Loader](DEBUG): Loading Module at Modules/Science.so
2013-12-16T21:15:59.183Z,1387228559.183 [CTD_NeilBrown] Loaded
2013-12-16T21:15:59.183Z,1387228559.183 [ComponentRegistry](DEBUG): Component "CTD_NeilBrown" handled in its own thread.
2013-12-16T21:15:59.188Z,1387228559.188 [CTD_NeilBrown ThreadHandler](DEBUG): Created PCaller Thread at 408B24E0
2013-12-16T21:15:59.226Z,1387228559.226 [WetLabsBB2FL] Loaded
2013-12-16T21:15:59.226Z,1387228559.226 [ComponentRegistry](DEBUG): Component "WetLabsBB2FL" handled in its own thread.
2013-12-16T21:15:59.228Z,1387228559.228 [WetLabsBB2FL ThreadHandler](DEBUG): Created PCaller Thread at 408E24E0
2013-12-16T21:15:59.229Z,1387228559.229 [Module Loader](DEBUG): Loaded Module: Science (Contains the science components)
2013-12-16T21:15:59.231Z,1387228559.231 [ComponentRegistry](DEBUG): SyncComponent "MissionManager" handled in the control thread.
2013-12-16T21:15:59.232Z,1387228559.232 [ComponentRegistry](DEBUG): SyncComponent "Reporter" handled in the control thread.
2013-12-16T21:15:59.245Z,1387228559.245 [ComponentRegistry](DEBUG): Component "NavChartDb" handled in its own thread.
2013-12-16T21:15:59.248Z,1387228559.248 [NavChartDb ThreadHandler](DEBUG): Created PCaller Thread at 409124E0
2013-12-16T21:15:59.253Z,1387228559.253 [Supervisor](DEBUG): Running supervisor.
2013-12-16T21:15:59.254Z,1387228559.254 [CommandLine](INFO): Thread ID is 760
2013-12-16T21:15:59.257Z,1387228559.257 [controlThread](INFO): Thread ID is 759
2013-12-16T21:15:59.257Z,1387228559.257 [controlThread](DEBUG): Initializing ControlThread
2013-12-16T21:15:59.258Z,1387228559.258 [CycleStarter](INFO): Thread ID is 758
2013-12-16T21:15:59.258Z,1387228559.258 [InternalSim](DEBUG):  InternalSim initializing...
2013-12-16T21:15:59.340Z,1387228559.340 [logger](INFO): Thread ID is 761
2013-12-16T21:15:59.406Z,1387228559.406 [AsyncPiEstimator](INFO): Thread ID is 828
2013-12-16T21:15:59.406Z,1387228559.406 [AsyncPiEstimator](DEBUG): Initialize AsyncPiEstimator.
2013-12-16T21:15:59.415Z,1387228559.415 [DVL_micro](INFO): Thread ID is 829
2013-12-16T21:15:59.433Z,1387228559.433 [DVL_micro](INFO): Initializing
2013-12-16T21:15:59.433Z,1387228559.433 [DVL_micro](INFO): start:Powering up
2013-12-16T21:15:59.434Z,1387228559.434 [DVL_micro](INFO): Opening uart, block timeout 10ths=20
2013-12-16T21:15:59.435Z,1387228559.435 [DVL_micro](INFO): Cycling power to configure device.
2013-12-16T21:15:59.443Z,1387228559.443 [SBIT](INFO): Initialize SBIT Component.
2013-12-16T21:15:59.443Z,1387228559.443 [SBIT](IMPORTANT): Tethys CM Info: 
 $Rev:10713
2013-12-16T21:15:59.443Z,1387228559.443 [SBIT](IMPORTANT): Kernel Release:2.6.27.8
2013-12-16T21:15:59.444Z,1387228559.444 [SBIT](IMPORTANT): Kernel Version:#634 PREEMPT Wed Feb 13 10:21:48 PST 2013
2013-12-16T21:15:59.444Z,1387228559.444 [IBIT](INFO): Initialize IBIT Component.
2013-12-16T21:15:59.446Z,1387228559.446 [CBIT](DEBUG): Initialize CBIT Component.
2013-12-16T21:15:59.446Z,1387228559.446 [CBIT](FAULT): LAST RESTART WAS UNINTENTIONAL.
2013-12-16T21:15:59.446Z,1387228559.446 [CBIT](INFO): Last reboot was NOT due to watchdog timer.
2013-12-16T21:15:59.465Z,1387228559.465 [CTD_NeilBrown](INFO): Thread ID is 830
2013-12-16T21:15:59.466Z,1387228559.466 [CTD_NeilBrown](DEBUG): Initializing CTD_NeilBrown.
2013-12-16T21:15:59.474Z,1387228559.474 [DepthRateCalculator](DEBUG): Initializing DepthRateCalculator.
2013-12-16T21:15:59.475Z,1387228559.475 [NavChart](DEBUG): Initialize NavChart Derivation.
2013-12-16T21:15:59.475Z,1387228559.475 [PitchRateCalculator](DEBUG): Initializing PitchRateCalculator.
2013-12-16T21:15:59.475Z,1387228559.475 [SpeedCalculator](DEBUG): Initializing SpeedCalculator.
2013-12-16T21:15:59.476Z,1387228559.476 [TempGradientCalculator](DEBUG): Initializing TempGradientCalculator.
2013-12-16T21:15:59.476Z,1387228559.476 [YawRateCalculator](DEBUG): Initializing YawRateCalculator.
2013-12-16T21:15:59.477Z,1387228559.477 [Navigation](DEBUG): Initializing Navigation.
2013-12-16T21:15:59.477Z,1387228559.477 [VerticalControl](DEBUG): Initialize VerticalControlComponent.
2013-12-16T21:15:59.479Z,1387228559.479 [HorizontalControl](DEBUG): Initialize HorizontalControlComponent.
2013-12-16T21:15:59.480Z,1387228559.480 [SpeedControl](DEBUG): Initialize SpeedControlComponent.
2013-12-16T21:15:59.480Z,1387228559.480 [LoopControl](DEBUG): Initialize LoopControlComponent.
2013-12-16T21:15:59.481Z,1387228559.481 [CTD_NeilBrown](INFO): Opening uart, block timeout 10ths=4
2013-12-16T21:15:59.492Z,1387228559.492 [WetLabsBB2FL](INFO): Thread ID is 831
2013-12-16T21:15:59.492Z,1387228559.492 [WetLabsBB2FL](INFO): Powering down
2013-12-16T21:15:59.522Z,1387228559.522 [NavChartDb](INFO): Thread ID is 832
2013-12-16T21:15:59.523Z,1387228559.523 [MissionManager](INFO): Loading Mission: Missions/Startup.xml
2013-12-16T21:15:59.607Z,1387228559.607 [Startup:A.GoToSurface](DEBUG): Construct GoToSurface.
2013-12-16T21:15:59.611Z,1387228559.611 [NavChartDb](INFO): Looking for Electronic Nav Chart files in directory: Resources
2013-12-16T21:15:59.612Z,1387228559.612 [NavChartDb](INFO): Already Loaded Electronic Nav Chart data from US5CA50M.000
2013-12-16T21:15:59.612Z,1387228559.612 [NavChartDb](INFO): Already Loaded Electronic Nav Chart data from US2WC11M.000
2013-12-16T21:15:59.612Z,1387228559.612 [NavChartDb](INFO): Already Loaded Electronic Nav Chart data from US1WC07M.000
2013-12-16T21:15:59.612Z,1387228559.612 [NavChartDb](INFO): Already Loaded Electronic Nav Chart data from US3CA52M.000
2013-12-16T21:15:59.613Z,1387228559.613 [NavChartDb](INFO): Already Loaded Electronic Nav Chart data from US5CA61M.000
2013-12-16T21:15:59.613Z,1387228559.613 [NavChartDb](INFO): Already Loaded Electronic Nav Chart data from US5CA83M.000
2013-12-16T21:15:59.613Z,1387228559.613 [NavChartDb](INFO): Already Loaded Electronic Nav Chart data from US5CA62M.000
2013-12-16T21:15:59.614Z,1387228559.614 [NavChartDb](INFO): Already Loaded Electronic Nav Chart data from US4CA60M.000
2013-12-16T21:15:59.665Z,1387228559.665 [MissionManager](DEBUG): 
<?xml version="1.0" encoding="UTF-8"?>
<Mission xmlns="Tethys"
       xmlns:Control="Tethys/Control"
       xmlns:Guidance="Tethys/Guidance" 
       xmlns:Units="Tethys/Units"
       xmlns:Universal="Tethys/Universal"
       xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
       xsi:schemaLocation="Tethys http://aosn.mbari.org/tethys/Xml/Tethys.xsd
                           Tethys/Control http://aosn.mbari.org/tethys/Xml/Control.xsd
                           Tethys/Guidance http://aosn.mbari.org/tethys/Xml/Guidance.xsd
                           Tethys/Units http://aosn.mbari.org/tethys/Xml/Units.xsd
                           Tethys/Universal http://aosn.mbari.org/tethys/Xml/Universal.xsd"
       Id="Startup">

    <Guidance:GoToSurface RunIn="Progression"/>

    <Aggregate Id="StartupSatComms" >

        <ReadDatum>
            <Timeout Duration="P1M" />
            <Universal:latitude_fix/>
        </ReadDatum>

        <ReadDatum>
            <Timeout Duration="P1M" />
            <Universal:platform_communications/>
        </ReadDatum>

    </Aggregate>

</Mission>


2013-12-16T21:15:59.666Z,1387228559.666 [MissionManager](INFO): Loading Mission: Missions/Default.xml
2013-12-16T21:15:59.728Z,1387228559.728 [MissionManager](INFO): DefineArg Default.NeedGPS = 1 bool
2013-12-16T21:15:59.730Z,1387228559.730 [Default:GPS:A.SetSpeed](DEBUG): Construct.
2013-12-16T21:15:59.734Z,1387228559.734 [Default:GPS:B.GoToSurface](DEBUG): Construct GoToSurface.
2013-12-16T21:15:59.763Z,1387228559.763 [Default:Iridium:A.SetSpeed](DEBUG): Construct.
2013-12-16T21:15:59.770Z,1387228559.770 [Default:Iridium:B.GoToSurface](DEBUG): Construct GoToSurface.
2013-12-16T21:15:59.799Z,1387228559.799 [Default:Iridium:Read_Iridium:A_Timeout:A.Execute](DEBUG): Construct Execute.
2013-12-16T21:15:59.825Z,1387228559.825 [Default:D.SetSpeed](DEBUG): Construct.
2013-12-16T21:15:59.828Z,1387228559.828 [Default:E.GoToSurface](DEBUG): Construct GoToSurface.
2013-12-16T21:15:59.869Z,1387228559.869 [Default:F.Wait](DEBUG): Construct Wait.
2013-12-16T21:15:59.873Z,1387228559.873 [MissionManager](DEBUG): 
<?xml version="1.0" encoding="UTF-8"?>
<Mission xmlns="Tethys"
xmlns:Control="Tethys/Control"
xmlns:Guidance="Tethys/Guidance" 
xmlns:Units="Tethys/Units"
xmlns:Universal="Tethys/Universal"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:schemaLocation="Tethys http://aosn.mbari.org/tethys/Xml/Tethys.xsd
Tethys/Control http://aosn.mbari.org/tethys/Xml/Control.xsd
Tethys/Guidance http://aosn.mbari.org/tethys/Xml/Guidance.xsd
Tethys/Units http://aosn.mbari.org/tethys/Xml/Units.xsd
Tethys/Universal http://aosn.mbari.org/tethys/Xml/Universal.xsd"
Id="Default">

    <DefineArg Name="NeedGPS"><True/></DefineArg>

    <Aggregate Id="GPS" >

        <When>
            <Arg Name="NeedGPS"/>
        </When>

<!-- Run at high speed -->

        <Guidance:SetSpeed RunIn="Parallel">
            <Setting><Guidance:SetSpeed.period/><Units:millisecond/><Value>400</Value></Setting>
        </Guidance:SetSpeed>

<!-- Get to the surface -->

        <Guidance:GoToSurface RunIn="Sequence"/>

<!-- Get GPS fix -->

        <ReadDatum Id="Read_GPS">
            <Universal:latitude_fix/>
        </ReadDatum>

        <Assign><Arg Name="NeedGPS"/><False/></Assign>

    </Aggregate>

    <Aggregate Id="Iridium" >

<!-- Run at high speed -->

        <Guidance:SetSpeed RunIn="Parallel">
            <Setting><Guidance:SetSpeed.period/><Units:millisecond/><Value>400</Value></Setting>
        </Guidance:SetSpeed>

<!-- Get to the surface -->

        <Guidance:GoToSurface RunIn="Sequence"/>

<!-- Do data comms -->

        <ReadDatum Id="Read_Iridium">
            <Timeout Duration="P2H">
                <Guidance:Execute RunIn="Sequence">
                    <Setting><Guidance:Execute.command/><String>Burn 300</String></Setting>
                </Guidance:Execute>
                <Syslog Severity="Critical">Dropped drop weight due to communications timeout</Syslog>
            </Timeout>
            <Universal:platform_communications/>
        </ReadDatum>

    </Aggregate>

    <Aggregate Id="CallIridium" >

        <When>
            <Elapsed><Universal:platform_communications/></Elapsed>
            <Gt><Units:minute/><Value>5.0</Value></Gt>
            <And><Universal:platform_conversation/><Eq><True/></Eq></And>
            <Or><Elapsed><Universal:platform_communications/></Elapsed><Gt><Units:hour/><Value>1.0</Value></Gt></Or>
        </When>

        <Assign><Arg Name="NeedGPS"/><True/></Assign>

        <Call RefId="Iridium"/>

    </Aggregate>

<!-- Wait forever at the surface-->

<!-- Run at low speed -->

    <Guidance:SetSpeed RunIn="Parallel">
        <Setting><Guidance:SetSpeed.period/><Units:second/><Value>5</Value></Setting>
    </Guidance:SetSpeed>

    <Guidance:GoToSurface RunIn="Parallel"/>

    <Guidance:Wait RunIn="Sequence"></Guidance:Wait>

</Mission>


2013-12-16T21:15:59.894Z,1387228559.894 [controlThread](DEBUG): Component order: CycleStarter,InternalSim,AHRS_sp3003D,DataOverHttps,Depth_Keller,NAL9602,Onboard,Radio_Freewave,DAT,Depth_Keller,DepthRateCalculator,HFRadarModelCalc,NavChart,PitchRateCalculator,SpeedCalculator,TempGradientCalculator,YawRateCalculator,Navigation,MissionManager,VerticalControl,HorizontalControl,SpeedControl,LoopControl,BuoyancyServo,ElevatorServo,MassServo,RudderServo,ThrusterServo,SBIT,IBIT,CBIT,Reporter,LogSplitter,
2013-12-16T21:15:59.950Z,1387228559.950 [AHRS_sp3003D](DEBUG): Initializing AHRS_sp3003D.
2013-12-16T21:15:59.964Z,1387228559.964 [DataOverHttps](INFO): tcpConnect
2013-12-16T21:16:00.191Z,1387228560.191 [Radio_Freewave](INFO): Powering up
2013-12-16T21:16:00.197Z,1387228560.197 [DAT](INFO): Powering up
2013-12-16T21:16:00.197Z,1387228560.197 [DAT](DEBUG): Initializing DAT.
2013-12-16T21:16:00.416Z,1387228560.416 [BuoyancyServo](DEBUG): Initializing EZServoServo.
2013-12-16T21:16:00.430Z,1387228560.430 [BuoyancyServo](DEBUG): Initializing BuoyancyServo.
2013-12-16T21:16:00.437Z,1387228560.437 [ElevatorServo](DEBUG): Initializing EZServoServo.
2013-12-16T21:16:00.462Z,1387228560.462 [ElevatorServo](DEBUG): Initializing ElevatorServo.
2013-12-16T21:16:00.469Z,1387228560.469 [MassServo](DEBUG): Initializing EZServoServo.
2013-12-16T21:16:00.474Z,1387228560.474 [MassServo](DEBUG): Initializing MassServo.
2013-12-16T21:16:00.480Z,1387228560.480 [RudderServo](DEBUG): Initializing EZServoServo.
2013-12-16T21:16:00.487Z,1387228560.487 [RudderServo](DEBUG): Initializing RudderServo.
2013-12-16T21:16:00.492Z,1387228560.492 [ThrusterServo](DEBUG): Initializing EZServoServo.
2013-12-16T21:16:00.495Z,1387228560.495 [ThrusterServo](DEBUG): Initializing ThrusterServo.
2013-12-16T21:16:00.999Z,1387228560.999 [AHRS_sp3003D](ERROR): readHeadingMagBin UART error: serial timeout
2013-12-16T21:16:00.999Z,1387228560.999 [AHRS_sp3003D](ERROR): SP3003D failed to initialize
2013-12-16T21:16:00.999Z,1387228560.999 [AHRS_sp3003D] Hardware Fault, FailCount= 1
2013-12-16T21:16:00.000Z,1387228561.000 [AHRS_sp3003D](ERROR): Hardware Fault
2013-12-16T21:16:01.001Z,1387228561.001 [DataOverHttps](INFO): tcpConnecting
2013-12-16T21:16:01.001Z,1387228561.001 [DataOverHttps](INFO): sslConnect
2013-12-16T21:16:01.005Z,1387228561.005 [DataOverHttps](INFO): sslConnecting
2013-12-16T21:16:01.554Z,1387228561.554 [CBIT](ERROR): Hardware Fault in component: AHRS_sp3003D
2013-12-16T21:16:01.564Z,1387228561.564 [DVL_micro](INFO): Opening uart, block timeout 10ths=20
2013-12-16T21:16:01.565Z,1387228561.565 [DVL_micro](INFO): Querying output modes
2013-12-16T21:16:01.565Z,1387228561.565 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD0606

2013-12-16T21:16:01.599Z,1387228561.599 [AHRS_sp3003D](INFO): Powering down
2013-12-16T21:16:01.689Z,1387228561.689 [DataOverHttps](INFO): sslConnecting
2013-12-16T21:16:03.571Z,1387228563.571 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:16:03.571Z,1387228563.571 [DVL_micro](INFO): Output Modes: No Response
2013-12-16T21:16:03.571Z,1387228563.571 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD2525

2013-12-16T21:16:03.711Z,1387228563.711 [MassServo](FAULT): Mass shifter EEPROM initialization uart error serial timeout
2013-12-16T21:16:03.712Z,1387228563.712 [MassServo] Communications Fault, FailCount= 1
2013-12-16T21:16:03.712Z,1387228563.712 [MassServo](ERROR): Communications Fault
2013-12-16T21:16:03.715Z,1387228563.715 [CBIT](ERROR): Communications Fault in component: MassServo
2013-12-16T21:16:03.797Z,1387228563.797 [DataOverHttps](INFO): sslConnecting
2013-12-16T21:16:03.800Z,1387228563.800 [DataOverHttps](INFO): dataWrite
2013-12-16T21:16:03.800Z,1387228563.800 [DataOverHttps](INFO): dataWriting
2013-12-16T21:16:03.801Z,1387228563.801 [DataOverHttps](INFO): Wrote 206 bytes.
2013-12-16T21:16:03.968Z,1387228563.968 [MassServo](DEBUG): Uninitialize Mass Servo.
2013-12-16T21:16:03.969Z,1387228563.969 [MassServo](INFO): Powering down
2013-12-16T21:16:04.132Z,1387228564.132 [DataOverHttps](INFO): dataRead
2013-12-16T21:16:04.137Z,1387228564.137 [NAL9602](INFO): Powering up NAL9602
2013-12-16T21:16:04.322Z,1387228564.322 [CBIT](INFO): Clearing failed state for component AHRS_sp3003D
2013-12-16T21:16:04.322Z,1387228564.322 [AHRS_sp3003D] No Fault, FailCount= 1
2013-12-16T21:16:04.528Z,1387228564.528 [AHRS_sp3003D](DEBUG): Initializing AHRS_sp3003D.
2013-12-16T21:16:04.537Z,1387228564.537 [DataOverHttps](INFO): dataRead
2013-12-16T21:16:04.538Z,1387228564.538 [DataOverHttps](INFO): disconnect
2013-12-16T21:16:04.542Z,1387228564.542 [DataOverHttps](INFO): setting available, lastComms_.elapsed()=0.004006
2013-12-16T21:16:04.695Z,1387228564.695 [MassServo](DEBUG): Initializing EZServoServo.
2013-12-16T21:16:04.813Z,1387228564.813 [MassServo](DEBUG): Initializing MassServo.
2013-12-16T21:16:04.919Z,1387228564.919 [CBIT](INFO): Clearing failed state for component MassServo
2013-12-16T21:16:04.920Z,1387228564.920 [MassServo] No Fault, FailCount= 1
2013-12-16T21:16:05.575Z,1387228565.575 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:16:05.580Z,1387228565.580 [DVL_micro](INFO): pause:Powering down
2013-12-16T21:16:05.746Z,1387228565.746 [AHRS_sp3003D](ERROR): readHeadingMagBin UART error: serial timeout
2013-12-16T21:16:05.747Z,1387228565.747 [AHRS_sp3003D](ERROR): SP3003D failed to initialize
2013-12-16T21:16:05.747Z,1387228565.747 [AHRS_sp3003D] Hardware Fault, FailCount= 2
2013-12-16T21:16:05.747Z,1387228565.747 [AHRS_sp3003D](ERROR): Hardware Fault
2013-12-16T21:16:05.940Z,1387228565.940 [CBIT](ERROR): Hardware Fault in component: AHRS_sp3003D
2013-12-16T21:16:05.983Z,1387228565.983 [DVL_micro](INFO): NQ1 requested
2013-12-16T21:16:05.984Z,1387228565.984 [DVL_micro](INFO): Opening uart, block timeout 10ths=20
2013-12-16T21:16:05.984Z,1387228565.984 [DVL_micro](INFO): resume:Powering up
2013-12-16T21:16:05.984Z,1387228565.984 [DVL_micro](INFO): Cycling power to configure device.
2013-12-16T21:16:06.004Z,1387228566.004 [AHRS_sp3003D](INFO): Powering down
2013-12-16T21:16:07.509Z,1387228567.509 [MassServo](FAULT): Mass shifter EEPROM initialization uart error serial timeout
2013-12-16T21:16:07.509Z,1387228567.509 [MassServo] Communications Fault, FailCount= 2
2013-12-16T21:16:07.509Z,1387228567.509 [MassServo](ERROR): Communications Fault
2013-12-16T21:16:07.513Z,1387228567.513 [CBIT](ERROR): Communications Fault in component: MassServo
2013-12-16T21:16:07.621Z,1387228567.621 [MassServo](DEBUG): Uninitialize Mass Servo.
2013-12-16T21:16:07.621Z,1387228567.621 [MassServo](INFO): Powering down
2013-12-16T21:16:07.629Z,1387228567.629 [CBIT](INFO): Clearing failed state for component AHRS_sp3003D
2013-12-16T21:16:07.629Z,1387228567.629 [AHRS_sp3003D] No Fault, FailCount= 2
2013-12-16T21:16:07.929Z,1387228567.929 [AHRS_sp3003D](DEBUG): Initializing AHRS_sp3003D.
2013-12-16T21:16:07.990Z,1387228567.990 [DVL_micro](INFO): Opening uart, block timeout 10ths=20
2013-12-16T21:16:07.991Z,1387228567.991 [DVL_micro](INFO): Querying output modes
2013-12-16T21:16:07.991Z,1387228567.991 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD0606

2013-12-16T21:16:08.405Z,1387228568.405 [MassServo](DEBUG): Initializing EZServoServo.
2013-12-16T21:16:08.535Z,1387228568.535 [MassServo](DEBUG): Initializing MassServo.
2013-12-16T21:16:08.539Z,1387228568.539 [CBIT](INFO): Clearing failed state for component MassServo
2013-12-16T21:16:08.539Z,1387228568.539 [MassServo] No Fault, FailCount= 2
2013-12-16T21:16:09.072Z,1387228569.072 [AHRS_sp3003D](ERROR): readHeadingMagBin UART error: serial timeout
2013-12-16T21:16:09.072Z,1387228569.072 [AHRS_sp3003D](ERROR): SP3003D failed to initialize
2013-12-16T21:16:09.072Z,1387228569.072 [AHRS_sp3003D] Hardware Fault, FailCount= 3
2013-12-16T21:16:09.072Z,1387228569.072 [AHRS_sp3003D](ERROR): Hardware Fault
2013-12-16T21:16:09.223Z,1387228569.223 [CBIT](ERROR): Hardware Fault in component: AHRS_sp3003D
2013-12-16T21:16:09.273Z,1387228569.273 [AHRS_sp3003D](INFO): Powering down
2013-12-16T21:16:09.997Z,1387228569.997 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:16:09.997Z,1387228569.997 [DVL_micro](INFO): Output Modes: No Response
2013-12-16T21:16:09.997Z,1387228569.997 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD2525

2013-12-16T21:16:11.011Z,1387228571.011 [MassServo](FAULT): Mass shifter EEPROM initialization uart error serial timeout
2013-12-16T21:16:11.011Z,1387228571.011 [MassServo] Communications Fault, FailCount= 3
2013-12-16T21:16:11.011Z,1387228571.011 [MassServo](ERROR): Communications Fault
2013-12-16T21:16:11.014Z,1387228571.014 [CBIT](ERROR): Communications Fault in component: MassServo
2013-12-16T21:16:11.014Z,1387228571.014 [CBIT](INFO): Clearing failed state for component AHRS_sp3003D
2013-12-16T21:16:11.015Z,1387228571.015 [AHRS_sp3003D] No Fault, FailCount= 3
2013-12-16T21:16:11.037Z,1387228571.037 [AHRS_sp3003D](DEBUG): Initializing AHRS_sp3003D.
2013-12-16T21:16:11.131Z,1387228571.131 [MassServo](DEBUG): Uninitialize Mass Servo.
2013-12-16T21:16:11.131Z,1387228571.131 [MassServo](INFO): Powering down
2013-12-16T21:16:12.000Z,1387228572.000 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:16:12.003Z,1387228572.003 [DVL_micro](INFO): pause:Powering down
2013-12-16T21:16:12.164Z,1387228572.164 [AHRS_sp3003D](ERROR): readHeadingMagBin UART error: serial timeout
2013-12-16T21:16:12.165Z,1387228572.165 [AHRS_sp3003D](ERROR): SP3003D failed to initialize
2013-12-16T21:16:12.165Z,1387228572.165 [AHRS_sp3003D] Hardware Fault, FailCount= 4
2013-12-16T21:16:12.165Z,1387228572.165 [AHRS_sp3003D](ERROR): Hardware Fault
2013-12-16T21:16:12.269Z,1387228572.269 [MassServo](DEBUG): Initializing EZServoServo.
2013-12-16T21:16:12.414Z,1387228572.414 [DVL_micro](INFO): NQ1 requested
2013-12-16T21:16:12.414Z,1387228572.414 [DVL_micro](INFO): Opening uart, block timeout 10ths=20
2013-12-16T21:16:12.414Z,1387228572.414 [DVL_micro](INFO): resume:Powering up
2013-12-16T21:16:12.415Z,1387228572.415 [DVL_micro](INFO): Cycling power to configure device.
2013-12-16T21:16:12.418Z,1387228572.418 [MassServo](DEBUG): Initializing MassServo.
2013-12-16T21:16:12.423Z,1387228572.423 [CBIT](INFO): Clearing failed state for component MassServo
2013-12-16T21:16:12.423Z,1387228572.423 [MassServo] No Fault, FailCount= 3
2013-12-16T21:16:12.423Z,1387228572.423 [CBIT](ERROR): Hardware Fault in component: AHRS_sp3003D
2013-12-16T21:16:12.480Z,1387228572.480 [AHRS_sp3003D](INFO): Powering down
2013-12-16T21:16:13.717Z,1387228573.717 [CBIT](INFO): Clearing failed state for component AHRS_sp3003D
2013-12-16T21:16:13.717Z,1387228573.717 [AHRS_sp3003D] No Fault, FailCount= 4
2013-12-16T21:16:14.039Z,1387228574.039 [AHRS_sp3003D](DEBUG): Initializing AHRS_sp3003D.
2013-12-16T21:16:14.420Z,1387228574.420 [DVL_micro](INFO): Opening uart, block timeout 10ths=20
2013-12-16T21:16:14.421Z,1387228574.421 [DVL_micro](INFO): Querying output modes
2013-12-16T21:16:14.421Z,1387228574.421 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD0606

2013-12-16T21:16:15.009Z,1387228575.009 [MassServo](FAULT): Mass shifter EEPROM initialization uart error serial timeout
2013-12-16T21:16:15.009Z,1387228575.009 [MassServo] Communications Fault, FailCount= 4
2013-12-16T21:16:15.009Z,1387228575.009 [MassServo](ERROR): Communications Fault
2013-12-16T21:16:15.012Z,1387228575.012 [CBIT](ERROR): Communications Fault in component: MassServo
2013-12-16T21:16:15.369Z,1387228575.369 [AHRS_sp3003D](ERROR): readHeadingMagBin UART error: serial timeout
2013-12-16T21:16:15.369Z,1387228575.369 [AHRS_sp3003D](ERROR): SP3003D failed to initialize
2013-12-16T21:16:15.370Z,1387228575.370 [AHRS_sp3003D] Hardware Fault, FailCount= 5
2013-12-16T21:16:15.370Z,1387228575.370 [AHRS_sp3003D](ERROR): Hardware Fault
2013-12-16T21:16:16.427Z,1387228576.427 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:16:16.427Z,1387228576.427 [DVL_micro](INFO): Output Modes: No Response
2013-12-16T21:16:16.427Z,1387228576.427 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD2525

2013-12-16T21:16:17.413Z,1387228577.413 [NAL9602](ERROR): NAL9602 initialize uart error: serial timeout
2013-12-16T21:16:17.413Z,1387228577.413 [NAL9602] Communications Fault, FailCount= 1
2013-12-16T21:16:17.413Z,1387228577.413 [NAL9602](ERROR): Communications Fault
2013-12-16T21:16:17.481Z,1387228577.481 [MassServo](DEBUG): Uninitialize Mass Servo.
2013-12-16T21:16:17.481Z,1387228577.481 [MassServo](INFO): Powering down
2013-12-16T21:16:17.483Z,1387228577.483 [SBIT](IMPORTANT): Beginning Startup BIT
2013-12-16T21:16:17.486Z,1387228577.486 [CBIT](ERROR): Hardware Fault in component: AHRS_sp3003D
2013-12-16T21:16:17.486Z,1387228577.486 [CBIT](CRITICAL): Hardware Fault in component: AHRS_sp3003D
2013-12-16T21:16:17.486Z,1387228577.486 [CBIT](ERROR): Communications Fault in component: NAL9602
2013-12-16T21:16:17.487Z,1387228577.487 [CBIT](IMPORTANT): Beginning GF scan
2013-12-16T21:16:17.632Z,1387228577.632 [AHRS_sp3003D](INFO): Powering down
2013-12-16T21:16:17.720Z,1387228577.720 [NAL9602](INFO): Powering down
2013-12-16T21:16:17.901Z,1387228577.901 [CommandLine](FAULT): Scheduling is paused
2013-12-16T21:16:18.014Z,1387228578.014 [MassServo](DEBUG): Initializing EZServoServo.
2013-12-16T21:16:18.131Z,1387228578.131 [MassServo](DEBUG): Initializing MassServo.
2013-12-16T21:16:18.150Z,1387228578.150 [CBIT](INFO): Clearing failed state for component MassServo
2013-12-16T21:16:18.150Z,1387228578.150 [MassServo] No Fault, FailCount= 4
2013-12-16T21:16:18.431Z,1387228578.431 [CBIT](INFO): Clearing failed state for component NAL9602
2013-12-16T21:16:18.431Z,1387228578.431 [NAL9602] No Fault, FailCount= 1
2013-12-16T21:16:18.432Z,1387228578.432 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:16:18.433Z,1387228578.433 [DVL_micro](INFO): NQ1 requested
2013-12-16T21:16:18.434Z,1387228578.434 [DVL_micro](INFO): Cycling power to configure device.
2013-12-16T21:16:19.864Z,1387228579.864 [DAT](INFO): Init failed - response: 
2013-12-16T21:16:19.864Z,1387228579.864 [DAT](FAULT): DAT failed to initialize
2013-12-16T21:16:19.865Z,1387228579.865 [DAT] Communications Fault, FailCount= 1
2013-12-16T21:16:19.865Z,1387228579.865 [DAT](ERROR): Communications Fault
2013-12-16T21:16:20.443Z,1387228580.443 [MassServo](FAULT): Mass shifter EEPROM initialization uart error serial timeout
2013-12-16T21:16:20.443Z,1387228580.443 [MassServo] Communications Fault, FailCount= 5
2013-12-16T21:16:20.443Z,1387228580.443 [MassServo](ERROR): Communications Fault
2013-12-16T21:16:20.448Z,1387228580.448 [DVL_micro](INFO): Opening uart, block timeout 10ths=20
2013-12-16T21:16:20.448Z,1387228580.448 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD1616 00 0

2013-12-16T21:16:20.473Z,1387228580.473 [CBIT](ERROR): Communications Fault in component: MassServo
2013-12-16T21:16:20.474Z,1387228580.474 [CBIT](CRITICAL): Communications Fault in component: MassServo
2013-12-16T21:16:20.474Z,1387228580.474 [CBIT](ERROR): Communications Fault in component: DAT
2013-12-16T21:16:20.581Z,1387228580.581 [DAT](INFO): Powering down
2013-12-16T21:16:20.827Z,1387228580.827 [MassServo](DEBUG): Uninitialize Mass Servo.
2013-12-16T21:16:20.827Z,1387228580.827 [MassServo](INFO): Powering down
2013-12-16T21:16:21.383Z,1387228581.383 [MassServo](DEBUG): Initializing EZServoServo.
2013-12-16T21:16:21.511Z,1387228581.511 [MassServo](DEBUG): Initializing MassServo.
2013-12-16T21:16:21.539Z,1387228581.539 [CBIT](INFO): Clearing failed state for component DAT
2013-12-16T21:16:21.539Z,1387228581.539 [DAT] No Fault, FailCount= 1
2013-12-16T21:16:22.460Z,1387228582.460 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:16:22.460Z,1387228582.460 [DVL_micro](INFO): Enabling NQ1 output
2013-12-16T21:16:22.461Z,1387228582.461 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD0505 01 1

2013-12-16T21:16:22.894Z,1387228582.894 [NAL9602](INFO): Powering up NAL9602
2013-12-16T21:16:23.705Z,1387228583.705 [DAT](INFO): Powering up
2013-12-16T21:16:23.706Z,1387228583.706 [DAT](DEBUG): Initializing DAT.
2013-12-16T21:16:24.463Z,1387228584.463 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:16:24.464Z,1387228584.464 [DVL_micro](INFO): Querying output modes
2013-12-16T21:16:24.464Z,1387228584.464 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD0606

2013-12-16T21:16:26.466Z,1387228586.466 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:16:26.467Z,1387228586.467 [DVL_micro](INFO): Output Modes: No Response
2013-12-16T21:16:26.467Z,1387228586.467 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD2525

2013-12-16T21:16:28.474Z,1387228588.474 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:16:30.092Z,1387228590.092 [DataOverHttps](INFO): tcpConnect
2013-12-16T21:16:30.489Z,1387228590.489 [DataOverHttps](INFO): tcpConnecting
2013-12-16T21:16:30.489Z,1387228590.489 [DataOverHttps](INFO): sslConnect
2013-12-16T21:16:30.490Z,1387228590.490 [DataOverHttps](INFO): sslConnecting
2013-12-16T21:16:30.505Z,1387228590.505 [DVL_micro](INFO): NQ1 requested
2013-12-16T21:16:30.505Z,1387228590.505 [DVL_micro](INFO): Cycling power to configure device.
2013-12-16T21:16:30.889Z,1387228590.889 [DataOverHttps](INFO): sslConnecting
2013-12-16T21:16:31.991Z,1387228591.991 [DataOverHttps](INFO): sslConnecting
2013-12-16T21:16:31.993Z,1387228591.993 [DataOverHttps](INFO): dataWrite
2013-12-16T21:16:31.993Z,1387228591.993 [DataOverHttps](INFO): dataWriting
2013-12-16T21:16:31.995Z,1387228591.995 [DataOverHttps](INFO): Wrote 206 bytes.
2013-12-16T21:16:32.350Z,1387228592.350 [DataOverHttps](INFO): dataRead
2013-12-16T21:16:32.512Z,1387228592.512 [DVL_micro](INFO): Opening uart, block timeout 10ths=20
2013-12-16T21:16:32.513Z,1387228592.513 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD1616 00 0

2013-12-16T21:16:32.750Z,1387228592.750 [DataOverHttps](INFO): dataRead
2013-12-16T21:16:32.750Z,1387228592.750 [DataOverHttps](INFO): disconnect
2013-12-16T21:16:34.523Z,1387228594.523 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:16:34.523Z,1387228594.523 [DVL_micro](INFO): Enabling NQ1 output
2013-12-16T21:16:34.523Z,1387228594.523 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD0505 01 1

2013-12-16T21:16:35.573Z,1387228595.573 [NAL9602](ERROR): NAL9602 initialize uart error: serial timeout
2013-12-16T21:16:35.573Z,1387228595.573 [NAL9602] Communications Fault, FailCount= 2
2013-12-16T21:16:35.573Z,1387228595.573 [NAL9602](ERROR): Communications Fault
2013-12-16T21:16:35.669Z,1387228595.669 [CBIT](ERROR): Communications Fault in component: NAL9602
2013-12-16T21:16:35.669Z,1387228595.669 [CBIT](CRITICAL): Communications Fault in component: NAL9602
2013-12-16T21:16:35.775Z,1387228595.775 [NAL9602](INFO): Powering down
2013-12-16T21:16:36.534Z,1387228596.534 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:16:36.534Z,1387228596.534 [DVL_micro](INFO): Querying output modes
2013-12-16T21:16:36.535Z,1387228596.535 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD0606

2013-12-16T21:16:38.569Z,1387228598.569 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:16:38.569Z,1387228598.569 [DVL_micro](INFO): Output Modes: No Response
2013-12-16T21:16:38.569Z,1387228598.569 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD2525

2013-12-16T21:16:40.580Z,1387228600.580 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:16:42.584Z,1387228602.584 [DVL_micro](INFO): NQ1 requested
2013-12-16T21:16:42.584Z,1387228602.584 [DVL_micro](INFO): Cycling power to configure device.
2013-12-16T21:16:43.216Z,1387228603.216 [DAT](INFO): Init failed - response: 
2013-12-16T21:16:43.217Z,1387228603.217 [DAT](FAULT): DAT failed to initialize
2013-12-16T21:16:43.217Z,1387228603.217 [DAT] Communications Fault, FailCount= 2
2013-12-16T21:16:43.217Z,1387228603.217 [DAT](ERROR): Communications Fault
2013-12-16T21:16:43.236Z,1387228603.236 [CBIT](ERROR): Communications Fault in component: DAT
2013-12-16T21:16:43.446Z,1387228603.446 [DAT](INFO): Powering down
2013-12-16T21:16:43.581Z,1387228603.581 [CBIT](CRITICAL): Environmental Failure. Press:14.451184 PSI. Humidity:12%. Temp:21 C. ABORTING MISSION
2013-12-16T21:16:43.583Z,1387228603.583 [CBIT](IMPORTANT): No ground fault detected
2013-12-16T21:16:44.172Z,1387228604.172 [CBIT](INFO): Clearing failed state for component DAT
2013-12-16T21:16:44.172Z,1387228604.172 [DAT] No Fault, FailCount= 2
2013-12-16T21:16:44.587Z,1387228604.587 [DVL_micro](INFO): Opening uart, block timeout 10ths=20
2013-12-16T21:16:44.587Z,1387228604.587 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD1616 00 0

2013-12-16T21:16:46.500Z,1387228606.500 [DAT](INFO): Powering up
2013-12-16T21:16:46.501Z,1387228606.501 [DAT](DEBUG): Initializing DAT.
2013-12-16T21:16:46.594Z,1387228606.594 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:16:46.594Z,1387228606.594 [DVL_micro](INFO): Enabling NQ1 output
2013-12-16T21:16:46.594Z,1387228606.594 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD0505 01 1

2013-12-16T21:16:48.605Z,1387228608.605 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:16:48.605Z,1387228608.605 [DVL_micro](INFO): Querying output modes
2013-12-16T21:16:48.605Z,1387228608.605 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD0606

2013-12-16T21:16:50.612Z,1387228610.612 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:16:50.612Z,1387228610.612 [DVL_micro](INFO): Output Modes: No Response
2013-12-16T21:16:50.612Z,1387228610.612 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD2525

2013-12-16T21:16:52.623Z,1387228612.623 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:16:54.635Z,1387228614.635 [DVL_micro](INFO): NQ1 requested
2013-12-16T21:16:54.635Z,1387228614.635 [DVL_micro](INFO): Cycling power to configure device.
2013-12-16T21:16:56.638Z,1387228616.638 [DVL_micro](INFO): Opening uart, block timeout 10ths=20
2013-12-16T21:16:56.638Z,1387228616.638 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD1616 00 0

2013-12-16T21:16:58.648Z,1387228618.648 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:16:58.649Z,1387228618.649 [DVL_micro](INFO): Enabling NQ1 output
2013-12-16T21:16:58.649Z,1387228618.649 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD0505 01 1

2013-12-16T21:17:00.092Z,1387228620.092 [DataOverHttps](INFO): tcpConnect
2013-12-16T21:17:00.488Z,1387228620.488 [DataOverHttps](INFO): tcpConnecting
2013-12-16T21:17:00.488Z,1387228620.488 [DataOverHttps](INFO): sslConnect
2013-12-16T21:17:00.489Z,1387228620.489 [DataOverHttps](INFO): sslConnecting
2013-12-16T21:17:00.655Z,1387228620.655 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:17:00.656Z,1387228620.656 [DVL_micro](INFO): Querying output modes
2013-12-16T21:17:00.656Z,1387228620.656 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD0606

2013-12-16T21:17:00.888Z,1387228620.888 [DataOverHttps](INFO): sslConnecting
2013-12-16T21:17:01.491Z,1387228621.491 [DataOverHttps](INFO): sslConnecting
2013-12-16T21:17:01.494Z,1387228621.494 [DataOverHttps](INFO): dataWrite
2013-12-16T21:17:01.494Z,1387228621.494 [DataOverHttps](INFO): dataWriting
2013-12-16T21:17:01.495Z,1387228621.495 [DataOverHttps](INFO): Wrote 206 bytes.
2013-12-16T21:17:01.857Z,1387228621.857 [DataOverHttps](INFO): dataRead
2013-12-16T21:17:02.257Z,1387228622.257 [DataOverHttps](INFO): dataRead
2013-12-16T21:17:02.258Z,1387228622.258 [DataOverHttps](INFO): disconnect
2013-12-16T21:17:02.667Z,1387228622.667 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:17:02.667Z,1387228622.667 [DVL_micro](INFO): Output Modes: No Response
2013-12-16T21:17:02.667Z,1387228622.667 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD2525

2013-12-16T21:17:04.670Z,1387228624.670 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:17:06.172Z,1387228626.172 [DAT](INFO): Init failed - response: 
2013-12-16T21:17:06.172Z,1387228626.172 [DAT](FAULT): DAT failed to initialize
2013-12-16T21:17:06.172Z,1387228626.172 [DAT] Communications Fault, FailCount= 3
2013-12-16T21:17:06.173Z,1387228626.173 [DAT](ERROR): Communications Fault
2013-12-16T21:17:06.189Z,1387228626.189 [CBIT](ERROR): Communications Fault in component: DAT
2013-12-16T21:17:06.189Z,1387228626.189 [CBIT](CRITICAL): Communications Fault in component: DAT
2013-12-16T21:17:06.302Z,1387228626.302 [DAT](INFO): Powering down
2013-12-16T21:17:06.677Z,1387228626.677 [DVL_micro](INFO): NQ1 requested
2013-12-16T21:17:06.678Z,1387228626.678 [DVL_micro](INFO): Cycling power to configure device.
2013-12-16T21:17:08.680Z,1387228628.680 [DVL_micro](INFO): Opening uart, block timeout 10ths=20
2013-12-16T21:17:08.681Z,1387228628.681 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD1616 00 0

2013-12-16T21:17:10.687Z,1387228630.687 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:17:10.687Z,1387228630.687 [DVL_micro](INFO): Enabling NQ1 output
2013-12-16T21:17:10.687Z,1387228630.687 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD0505 01 1

2013-12-16T21:17:12.282Z,1387228632.282 [SBIT](IMPORTANT): SBIT PASSED
2013-12-16T21:17:12.672Z,1387228632.672 [MissionManager](IMPORTANT): Started mission Startup
2013-12-16T21:17:12.672Z,1387228632.672 [Startup] Running Loop=1
2013-12-16T21:17:12.672Z,1387228632.672 [Startup](INFO): Aggregate::initialize Startup
2013-12-16T21:17:12.672Z,1387228632.672 [Startup:A.GoToSurface] Running Loop=1
2013-12-16T21:17:12.672Z,1387228632.672 [Startup:A.GoToSurface](DEBUG): Initialize GoToSurfaceComponent.
2013-12-16T21:17:12.679Z,1387228632.679 [Startup:StartupSatComms] Running Loop=1
2013-12-16T21:17:12.679Z,1387228632.679 [Startup:StartupSatComms](INFO): Aggregate::initialize Startup:StartupSatComms
2013-12-16T21:17:12.679Z,1387228632.679 [Startup:StartupSatComms:A] Running Loop=1
2013-12-16T21:17:12.698Z,1387228632.698 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:17:12.698Z,1387228632.698 [DVL_micro](INFO): Querying output modes
2013-12-16T21:17:12.698Z,1387228632.698 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD0606

2013-12-16T21:17:13.082Z,1387228633.082 [Startup:StartupSatComms:A](DEBUG): Initialize ReadDataComponent to sense latitude_fix
2013-12-16T21:17:14.705Z,1387228634.705 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:17:14.706Z,1387228634.706 [DVL_micro](INFO): Output Modes: No Response
2013-12-16T21:17:14.706Z,1387228634.706 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD2525

2013-12-16T21:17:16.712Z,1387228636.712 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:17:18.724Z,1387228638.724 [DVL_micro](INFO): NQ1 requested
2013-12-16T21:17:18.724Z,1387228638.724 [DVL_micro](INFO): Cycling power to configure device.
2013-12-16T21:17:20.727Z,1387228640.727 [DVL_micro](INFO): Opening uart, block timeout 10ths=20
2013-12-16T21:17:20.727Z,1387228640.727 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD1616 00 0

2013-12-16T21:17:22.738Z,1387228642.738 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:17:22.738Z,1387228642.738 [DVL_micro](INFO): Enabling NQ1 output
2013-12-16T21:17:22.738Z,1387228642.738 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD0505 01 1

2013-12-16T21:17:24.761Z,1387228644.761 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:17:24.762Z,1387228644.762 [DVL_micro](INFO): Querying output modes
2013-12-16T21:17:24.762Z,1387228644.762 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD0606

2013-12-16T21:17:26.768Z,1387228646.768 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:17:26.768Z,1387228646.768 [DVL_micro](INFO): Output Modes: No Response
2013-12-16T21:17:26.768Z,1387228646.768 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD2525

2013-12-16T21:17:28.775Z,1387228648.775 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:17:30.258Z,1387228650.258 [DataOverHttps](INFO): tcpConnect
2013-12-16T21:17:30.658Z,1387228650.658 [DataOverHttps](INFO): tcpConnecting
2013-12-16T21:17:30.658Z,1387228650.658 [DataOverHttps](INFO): sslConnect
2013-12-16T21:17:30.659Z,1387228650.659 [DataOverHttps](INFO): sslConnecting
2013-12-16T21:17:30.783Z,1387228650.783 [DVL_micro](INFO): NQ1 requested
2013-12-16T21:17:30.783Z,1387228650.783 [DVL_micro](INFO): Cycling power to configure device.
2013-12-16T21:17:31.054Z,1387228651.054 [DataOverHttps](INFO): sslConnecting
2013-12-16T21:17:31.583Z,1387228651.583 [DataOverHttps](INFO): sslConnecting
2013-12-16T21:17:31.585Z,1387228651.585 [DataOverHttps](INFO): dataWrite
2013-12-16T21:17:31.585Z,1387228651.585 [DataOverHttps](INFO): dataWriting
2013-12-16T21:17:31.586Z,1387228651.586 [DataOverHttps](INFO): Wrote 206 bytes.
2013-12-16T21:17:31.984Z,1387228651.984 [DataOverHttps](INFO): dataRead
2013-12-16T21:17:32.384Z,1387228652.384 [DataOverHttps](INFO): dataRead
2013-12-16T21:17:32.385Z,1387228652.385 [DataOverHttps](INFO): disconnect
2013-12-16T21:17:32.786Z,1387228652.786 [DVL_micro](INFO): Opening uart, block timeout 10ths=20
2013-12-16T21:17:32.786Z,1387228652.786 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD1616 00 0

2013-12-16T21:17:34.789Z,1387228654.789 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:17:34.789Z,1387228654.789 [DVL_micro](INFO): Enabling NQ1 output
2013-12-16T21:17:34.789Z,1387228654.789 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD0505 01 1

2013-12-16T21:17:36.800Z,1387228656.800 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:17:36.800Z,1387228656.800 [DVL_micro](INFO): Querying output modes
2013-12-16T21:17:36.800Z,1387228656.800 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD0606

2013-12-16T21:17:38.803Z,1387228658.803 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:17:38.803Z,1387228658.803 [DVL_micro](INFO): Output Modes: No Response
2013-12-16T21:17:38.803Z,1387228658.803 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD2525

2013-12-16T21:17:40.806Z,1387228660.806 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:17:42.814Z,1387228662.814 [DVL_micro](INFO): NQ1 requested
2013-12-16T21:17:42.814Z,1387228662.814 [DVL_micro](INFO): Cycling power to configure device.
2013-12-16T21:17:44.816Z,1387228664.816 [DVL_micro](INFO): Opening uart, block timeout 10ths=20
2013-12-16T21:17:44.817Z,1387228664.817 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD1616 00 0

2013-12-16T21:17:46.823Z,1387228666.823 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:17:46.823Z,1387228666.823 [DVL_micro](INFO): Enabling NQ1 output
2013-12-16T21:17:46.823Z,1387228666.823 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD0505 01 1

2013-12-16T21:17:48.830Z,1387228668.830 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:17:48.830Z,1387228668.830 [DVL_micro](INFO): Querying output modes
2013-12-16T21:17:48.830Z,1387228668.830 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD0606

2013-12-16T21:17:50.837Z,1387228670.837 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:17:50.837Z,1387228670.837 [DVL_micro](INFO): Output Modes: No Response
2013-12-16T21:17:50.838Z,1387228670.838 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD2525

2013-12-16T21:17:52.840Z,1387228672.840 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:17:54.860Z,1387228674.860 [DVL_micro](INFO): NQ1 requested
2013-12-16T21:17:54.860Z,1387228674.860 [DVL_micro](INFO): Cycling power to configure device.
2013-12-16T21:17:56.863Z,1387228676.863 [DVL_micro](INFO): Opening uart, block timeout 10ths=20
2013-12-16T21:17:56.864Z,1387228676.864 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD1616 00 0

2013-12-16T21:17:58.874Z,1387228678.874 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:17:58.874Z,1387228678.874 [DVL_micro](INFO): Enabling NQ1 output
2013-12-16T21:17:58.874Z,1387228678.874 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD0505 01 1

2013-12-16T21:18:00.384Z,1387228680.384 [DataOverHttps](INFO): tcpConnect
2013-12-16T21:18:00.784Z,1387228680.784 [DataOverHttps](INFO): tcpConnecting
2013-12-16T21:18:00.784Z,1387228680.784 [DataOverHttps](INFO): sslConnect
2013-12-16T21:18:00.786Z,1387228680.786 [DataOverHttps](INFO): sslConnecting
2013-12-16T21:18:00.885Z,1387228680.885 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:18:00.885Z,1387228680.885 [DVL_micro](INFO): Querying output modes
2013-12-16T21:18:00.885Z,1387228680.885 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD0606

2013-12-16T21:18:01.184Z,1387228681.184 [DataOverHttps](INFO): sslConnecting
2013-12-16T21:18:01.692Z,1387228681.692 [DataOverHttps](INFO): sslConnecting
2013-12-16T21:18:01.694Z,1387228681.694 [DataOverHttps](INFO): dataWrite
2013-12-16T21:18:01.694Z,1387228681.694 [DataOverHttps](INFO): dataWriting
2013-12-16T21:18:01.695Z,1387228681.695 [DataOverHttps](INFO): Wrote 206 bytes.
2013-12-16T21:18:02.094Z,1387228682.094 [DataOverHttps](INFO): dataRead
2013-12-16T21:18:02.495Z,1387228682.495 [DataOverHttps](INFO): dataRead
2013-12-16T21:18:02.496Z,1387228682.496 [DataOverHttps](INFO): disconnect
2013-12-16T21:18:02.896Z,1387228682.896 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:18:02.896Z,1387228682.896 [DVL_micro](INFO): Output Modes: No Response
2013-12-16T21:18:02.896Z,1387228682.896 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD2525

2013-12-16T21:18:04.907Z,1387228684.907 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:18:06.911Z,1387228686.911 [DVL_micro](INFO): NQ1 requested
2013-12-16T21:18:06.911Z,1387228686.911 [DVL_micro](INFO): Cycling power to configure device.
2013-12-16T21:18:08.914Z,1387228688.914 [DVL_micro](INFO): Opening uart, block timeout 10ths=20
2013-12-16T21:18:08.914Z,1387228688.914 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD1616 00 0

2013-12-16T21:18:10.921Z,1387228690.921 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:18:10.921Z,1387228690.921 [DVL_micro](INFO): Enabling NQ1 output
2013-12-16T21:18:10.921Z,1387228690.921 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD0505 01 1

2013-12-16T21:18:12.918Z,1387228692.918 [Startup:StartupSatComms:A](INFO): Timed out from 2013-12-16T21:17:12.7Z
2013-12-16T21:18:12.918Z,1387228692.918 [Startup:StartupSatComms:A:A_Timeout] Running Loop=1
2013-12-16T21:18:12.918Z,1387228692.918 [Startup:StartupSatComms:A:A_Timeout](INFO): Aggregate::initialize Startup:StartupSatComms:A:A_Timeout
2013-12-16T21:18:12.918Z,1387228692.918 [Startup:StartupSatComms:A:A_Timeout](INFO): Completed Startup:StartupSatComms:A:A_Timeout
2013-12-16T21:18:12.918Z,1387228692.918 [Startup:StartupSatComms:A] Stopped
2013-12-16T21:18:12.918Z,1387228692.918 [Startup:StartupSatComms:B] Running Loop=1
2013-12-16T21:18:12.932Z,1387228692.932 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:18:12.932Z,1387228692.932 [DVL_micro](INFO): Querying output modes
2013-12-16T21:18:12.932Z,1387228692.932 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD0606

2013-12-16T21:18:13.314Z,1387228693.314 [Startup:StartupSatComms:B](DEBUG): Initialize ReadDataComponent to sense platform_communications
2013-12-16T21:18:14.353Z,1387228694.353 [DataOverHttps](INFO): tcpConnect
2013-12-16T21:18:14.394Z,1387228694.394 [DataOverHttps](INFO): tcpConnecting
2013-12-16T21:18:14.394Z,1387228694.394 [DataOverHttps](INFO): sslConnect
2013-12-16T21:18:14.395Z,1387228694.395 [DataOverHttps](INFO): sslConnecting
2013-12-16T21:18:14.794Z,1387228694.794 [DataOverHttps](INFO): sslConnecting
2013-12-16T21:18:14.935Z,1387228694.935 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:18:14.935Z,1387228694.935 [DVL_micro](INFO): Output Modes: No Response
2013-12-16T21:18:14.935Z,1387228694.935 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD2525

2013-12-16T21:18:15.309Z,1387228695.309 [DataOverHttps](INFO): sslConnecting
2013-12-16T21:18:15.311Z,1387228695.311 [DataOverHttps](INFO): dataWrite
2013-12-16T21:18:15.312Z,1387228695.312 [DataOverHttps](INFO): encoded 54 bytes: %5d%00%00%04%00%00%00%00%00%00%00%00%00%00%00%00%00%00
2013-12-16T21:18:15.313Z,1387228695.313 [DataOverHttps](INFO): Sending 18 bytes from file Logs/20131203T223425/Courier0008.lzma
2013-12-16T21:18:15.313Z,1387228695.313 [DataOverHttps](INFO): dataWriting
2013-12-16T21:18:15.315Z,1387228695.315 [DataOverHttps](INFO): Wrote 326 bytes.
2013-12-16T21:18:15.711Z,1387228695.711 [DataOverHttps](INFO): dataRead
2013-12-16T21:18:16.112Z,1387228696.112 [DataOverHttps](INFO): dataRead
2013-12-16T21:18:16.513Z,1387228696.513 [DataOverHttps](INFO): dataRead
2013-12-16T21:18:16.514Z,1387228696.514 [DataOverHttps](INFO): Moved sent file to Logs/20131203T223425/Courier0008.lzma.bak
2013-12-16T21:18:16.514Z,1387228696.514 [DataOverHttps](INFO): SBD MOMSN=271383
2013-12-16T21:18:16.514Z,1387228696.514 [DataOverHttps](INFO): disconnect
2013-12-16T21:18:16.938Z,1387228696.938 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:18:17.229Z,1387228697.229 [DataOverHttps](INFO): tcpConnect
2013-12-16T21:18:17.310Z,1387228697.310 [DataOverHttps](INFO): tcpConnecting
2013-12-16T21:18:17.310Z,1387228697.310 [DataOverHttps](INFO): sslConnect
2013-12-16T21:18:17.311Z,1387228697.311 [DataOverHttps](INFO): sslConnecting
2013-12-16T21:18:17.711Z,1387228697.711 [DataOverHttps](INFO): sslConnecting
2013-12-16T21:18:18.219Z,1387228698.219 [DataOverHttps](INFO): sslConnecting
2013-12-16T21:18:18.221Z,1387228698.221 [DataOverHttps](INFO): dataWrite
2013-12-16T21:18:18.223Z,1387228698.223 [DataOverHttps](INFO): encoded 598 bytes: %5d%00%00%04%00M%01%00%00%00%00%00%00%00%15%1d%80%03%0cVb%01%11U%5e%ae%14%09%a7%08%ce%24%89%5cS%d4%b1g%a9%fa%b4%e6H%b0a%bb%3a%7c%168%07%c6%b3%b5%3f%9c%27.%83%7bx%a3%02%9a%e2a%aek%e6%ac%86L%d5%3c%81%ed%7f%94%d2%5b%a6%ee%fb%c0P4%5e%ea%8f%e9Y%90%ee%7f%ea%d3%aa%b7o%94%2fi%92%c2%3a%b5h%bd%cbf%1d3%dbp%17%a5%ee%9f%bb2%c2%93%few%10%40%28%e6%19g%0eIL%af%01%04%cdvr%02%d7d%eb%5b%cd%f7%ca%c4%18%16SaH%adH%60h%2f%91%a9%de%a8%3b%c5z%ad%21%16%c7%12%1f%e1%3c%a7az%87%c4%91fG%f5%f0%b9%df%2f%c0%f8%0b%26%1a%bfr%c7%fb%c8km%a6%aa%7c%e8A%d9%08%bdNWu%e0%60Q%a2%fb%0e%db%98%3efGXH%f8%e79%bc%06%cfX%c0%8e%0f%10%c4%b1%10
2013-12-16T21:18:18.224Z,1387228698.224 [DataOverHttps](INFO): Sending 236 bytes from file Logs/20131216T211549/Courier0000.lzma
2013-12-16T21:18:18.224Z,1387228698.224 [DataOverHttps](INFO): dataWriting
2013-12-16T21:18:18.226Z,1387228698.226 [DataOverHttps](INFO): Wrote 871 bytes.
2013-12-16T21:18:18.620Z,1387228698.620 [DataOverHttps](INFO): dataRead
2013-12-16T21:18:18.943Z,1387228698.943 [DVL_micro](INFO): NQ1 requested
2013-12-16T21:18:18.943Z,1387228698.943 [DVL_micro](INFO): Cycling power to configure device.
2013-12-16T21:18:19.020Z,1387228699.020 [DataOverHttps](INFO): dataRead
2013-12-16T21:18:19.022Z,1387228699.022 [DataOverHttps](INFO): Moved sent file to Logs/20131216T211549/Courier0000.lzma.bak
2013-12-16T21:18:19.022Z,1387228699.022 [DataOverHttps](INFO): SBD MOMSN=271385
2013-12-16T21:18:19.022Z,1387228699.022 [DataOverHttps](INFO): disconnect
2013-12-16T21:18:19.965Z,1387228699.965 [DataOverHttps](INFO): tcpConnect
2013-12-16T21:18:20.002Z,1387228700.002 [DataOverHttps](INFO): tcpConnecting
2013-12-16T21:18:20.003Z,1387228700.003 [DataOverHttps](INFO): sslConnect
2013-12-16T21:18:20.004Z,1387228700.004 [DataOverHttps](INFO): sslConnecting
2013-12-16T21:18:20.406Z,1387228700.406 [DataOverHttps](INFO): sslConnecting
2013-12-16T21:18:20.908Z,1387228700.908 [DataOverHttps](INFO): sslConnecting
2013-12-16T21:18:20.910Z,1387228700.910 [DataOverHttps](INFO): dataWrite
2013-12-16T21:18:20.913Z,1387228700.913 [DataOverHttps](INFO): encoded 766 bytes: %5d%00%00%04%00%de%01%00%00%00%00%00%00%00%15%1d%80%03%0cVb%02%a9%bb1%c7%a1%06%3d%95%e7%e1%af%fb%f6%c9%02AF%09O%f6%2a%60%9b%af%b6%aa%5d5Z%ca%fe%b5%27%08%e8%ba%ae%91%d5%9fWS%5e%d9%d0M%2a%ef%94%d1V%f6Y%12%02%1e%efh%db%ff%0eUk%84%e0%b7%b5S%9a%0b%b6%fdi%b8%a6%f1%9cL%aa%07%0a%b7%dd%f59%cb%ec%db%c5G%ba%b1%86S%a3o5qk%ce%04%99%ff%8f%ad%90%40%ba%c8N%f6%9d%7bR%09Z%b6%0f%eb%b1%da%c1U%18%3b%5dB%d4%c4%3e%25xv%f5%ad%997%28t%12%81%5e%06%d5%99xN%5b%ef%2f%dc%f0%12%91%dd%act%e3%d4%906%ea%bd%ba%28%88~%3d%24r%ef%28E%85%94%24p%c1%0b%23%df%cfW%d7%14%8a%bf%29%28%b3Hmad%f0%f4%f1MO%1e%e4%dd%a6%e7%ac%a53%8d%a9%d0%d4%0b%15z%9b%ce%c1-%93%da%98%9b%15I%15V%10L%22%83B%94%fb%b2%e5s%00%91%0a%00%02%c9t%88%86%a8%2a%1a%d1%e8%d9%9dp%2b%b2-%9f%cc%a1%ad%0e%9f%b0%ea%0a%b5%3e%dd%88%e6%25%ae%24%00
2013-12-16T21:18:20.914Z,1387228700.914 [DataOverHttps](INFO): Sending 296 bytes from file Logs/20131203T223425/Express0005.lzma
2013-12-16T21:18:20.914Z,1387228700.914 [DataOverHttps](INFO): dataWriting
2013-12-16T21:18:20.917Z,1387228700.917 [DataOverHttps](INFO): Wrote 1039 bytes.
2013-12-16T21:18:20.948Z,1387228700.948 [DVL_micro](INFO): Opening uart, block timeout 10ths=20
2013-12-16T21:18:20.949Z,1387228700.949 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD1616 00 0

2013-12-16T21:18:21.312Z,1387228701.312 [DataOverHttps](INFO): dataRead
2013-12-16T21:18:21.709Z,1387228701.709 [DataOverHttps](INFO): dataRead
2013-12-16T21:18:21.710Z,1387228701.710 [DataOverHttps](INFO): Moved sent file to Logs/20131203T223425/Express0005.lzma.bak
2013-12-16T21:18:21.710Z,1387228701.710 [DataOverHttps](INFO): SBD MOMSN=226385
2013-12-16T21:18:21.710Z,1387228701.710 [DataOverHttps](INFO): disconnect
2013-12-16T21:18:22.659Z,1387228702.659 [DataOverHttps](INFO): tcpConnect
2013-12-16T21:18:22.697Z,1387228702.697 [DataOverHttps](INFO): tcpConnecting
2013-12-16T21:18:22.697Z,1387228702.697 [DataOverHttps](INFO): sslConnect
2013-12-16T21:18:22.699Z,1387228702.699 [DataOverHttps](INFO): sslConnecting
2013-12-16T21:18:22.959Z,1387228702.959 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:18:22.959Z,1387228702.959 [DVL_micro](INFO): Enabling NQ1 output
2013-12-16T21:18:22.960Z,1387228702.960 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD0505 01 1

2013-12-16T21:18:23.098Z,1387228703.098 [DataOverHttps](INFO): sslConnecting
2013-12-16T21:18:23.605Z,1387228703.605 [DataOverHttps](INFO): sslConnecting
2013-12-16T21:18:23.607Z,1387228703.607 [DataOverHttps](INFO): dataWrite
2013-12-16T21:18:23.609Z,1387228703.609 [DataOverHttps](INFO): encoded 54 bytes: %5d%00%00%04%00%00%00%00%00%00%00%00%00%00%00%00%00%00
2013-12-16T21:18:23.609Z,1387228703.609 [DataOverHttps](INFO): Sending 18 bytes from file Logs/20131203T223425/Express0009.lzma
2013-12-16T21:18:23.610Z,1387228703.610 [DataOverHttps](INFO): dataWriting
2013-12-16T21:18:23.611Z,1387228703.611 [DataOverHttps](INFO): Wrote 326 bytes.
2013-12-16T21:18:24.008Z,1387228704.008 [DataOverHttps](INFO): dataRead
2013-12-16T21:18:24.409Z,1387228704.409 [DataOverHttps](INFO): dataRead
2013-12-16T21:18:24.413Z,1387228704.413 [DataOverHttps](INFO): Moved sent file to Logs/20131203T223425/Express0009.lzma.bak
2013-12-16T21:18:24.413Z,1387228704.413 [DataOverHttps](INFO): SBD MOMSN=271394
2013-12-16T21:18:24.413Z,1387228704.413 [DataOverHttps](INFO): disconnect
2013-12-16T21:18:24.970Z,1387228704.970 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:18:24.970Z,1387228704.970 [DVL_micro](INFO): Querying output modes
2013-12-16T21:18:24.971Z,1387228704.971 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD0606

2013-12-16T21:18:25.337Z,1387228705.337 [DataOverHttps](INFO): tcpConnect
2013-12-16T21:18:25.383Z,1387228705.383 [DataOverHttps](INFO): tcpConnecting
2013-12-16T21:18:25.384Z,1387228705.384 [DataOverHttps](INFO): sslConnect
2013-12-16T21:18:25.385Z,1387228705.385 [DataOverHttps](INFO): sslConnecting
2013-12-16T21:18:25.787Z,1387228705.787 [DataOverHttps](INFO): sslConnecting
2013-12-16T21:18:26.293Z,1387228706.293 [DataOverHttps](INFO): sslConnecting
2013-12-16T21:18:26.295Z,1387228706.295 [DataOverHttps](INFO): dataWrite
2013-12-16T21:18:26.299Z,1387228706.299 [DataOverHttps](INFO): encoded 4586 bytes: %5d%00%00%04%00%c0%0f%00%00%00%00%00%00%00%15%1d%80%03%0cVb%01%11U%5e%ae%14%09%a7%08%d5%087%cd%95%95G%3bG%19%86%a3%83%d0%f4%df%ccd%a6%87%9bd%3a%d9%94%29%a3%83_%907q%8drF%1c%f40%c2%10%88%03q%82%d7%0dU%d6%be%bd%89%ceG+z%94%b3%21%9b%5c%40q%d4%a3%05%a7%ba%e6D%b0%3cH%15%afL%ef%a98c.%80s%ec%97%1e%d1%82%e5%e0%9c%de%0a%04ct%b5%fd7%a9%d2%b2%f7%c7%13%29%a9%d9Ez%1b%2a%5c%be~%22%84%2b%fa%c7%c8%fac%3c%b2%bf%de%b49%3a%f2%dc%22%dd%01%a4%e8%d2H%bb_%91Ul%da%d5%d0%bd%e1%b2%2an%e0W%bb%00%9d%f8%af%ee%8e%cd%05w%60%ad%c9%98Q%ae%9c%9f%3e%21%a95%8aA%c4%a8%3a%cd%d5%da%9a%9d%0b5%da%f0%b6j%1arvM%b8%123%bb%19%7d%5b%282%b0%e5%dd%0cYp%b6C%86%5e%90RnQ%98qc%e9G%ff%bf%3a%25%14%eb%a0%bf%00%80Q%f0h%bey%f0%ec%f2%5d%8a%c2%0d%9b%f5KL%be%ef%1aB%2a%1e%f1%82r%ff%a2%92%efI%8cv%40%98%88%c5%a8%7c%83%86%e0%c54f%90%2c%3fC%1c%7c%e7%a1%c9F%e3v%d6%ecL%91%94%af%87%00%d6%1fe%83R3Cv%d4%3aM%ab%8d%daQu%2c.YMR%a2%89aK%a4%0a%d7%d5%bb%09+%f0%e5R%83%10%86%a7d%de%22%00%e0%01%11t%1a%2f%b0%c0%03%27%10NT%a2%9e%f6%1aL%e8%be%2c%b09tf%bfL%d4h%91%e5%96%94%3aI%f2%dd%3c%e6%b4%eep%183%7bD%5d%d6N%a1%a2%88%cc%88%8e%24%12B%cb%02%c0%dd%ad%ca%cfU%de%a9%27%2c%17%601%02%25%8d%ca%87%db%e5%9f%bee%60si%d3%13%81%28e%e5%ad%cd%0f%98%9c%01%e5%a5%b4%ce%95%83L%2bS%af%d1v%ec%f3%cb%0f%9a%27%0af~%fb5%9eW%fbw%fe%5d%02%ae%03%8c%13%8f%c2%9a%a6%85w%9bY%ba%ec%88%f0%2a%df%bcH%c1%8e%d0%c3%17F%0cE%ee%d9%5e%89%bf%c34lr%06I%00%28%8cN%02%00%e0%0e%25%f3%adl%c9%16t%9a%cb%d6%bfG%b2%9fV%b7x%7f%40IuZ%bc%cdp%ef%c6fm%1b%3d%d5%7f_%1d51S%f2%86%94%7f%83%5c%8dZ%ac%d1%9a%f2%ad%f0%edhP%9d%8d%c5P%1c%3c%ed%2b%12L%e1%a8M%8f%92%5bL%18%81%7dC%dc%3f%db%a7%d5%b2%17%83h%d3%22%7f%92s%f6%0c%91%c8%e6%ae%a8+Z%abH.%a7t+1%82%9a%98%1e%1c%3c%c8%ce%90L%ea%0c%179%e9%d8%0b%fc%daW%94%9fp%ddF%0d%9e%c93C%85%22eQ%bb%b9%df%85%db%c4X%c0%ad%d6%be%e8q%e1I%0a%f7%ea%b9%2a%3f%3b%9e%25%d1%b1%1f%c7Y%d6%ea%e53P%7c%c4%84%05%94%fc%23%ba%84f%c4%b4+%04%90%f9%d9%16%91%8e%8b%8f%7f%f0%17z%a9%bbW%d8K%98%d9i%21%08%d0%08%ac%09%c8W%3f%b0%a1%c9o%99%ca%21%c7%da%f4B%09%b0%ba%5e%d6G%99%ad7Fi%b2%27%e8C%8f%1e%f0%a6kxS%98%25%1a%8dw%3bm%d2%b6_%7c%1d%5bB%5c%1f%9b%04%d5qVrS%a4%f5%dfL%16%a6%a8%ba%3f%8d%ad%f7%2aS%b3%eaW%9c%fd%bfO%b8%8b%fb%ddHn%82%c6%2c%8f%f2H%b9%9f%12%90%d7xX%60%ae%f8q%cd%3e%9b%af%2c%3e%eb%e8%26%b9%b7N%3a%bc%3d5j5%8f~%e1%ad%ed%ab%3d%f2%ed%88%c7Y%5c%f4%dbB.%a9%dcU%f56n%83%a9%83%ee%b6r%b9Z%14%11%92%f7%8a%f2I%b3%26%d9a%0b%1f%06R%96%bf%97%ef%e8%f9%7d%bd%cdp%220K%ba_%2c%a3R%8f%b8%b9%d9Gr%04%5cN%aa%2b%1fu%e7%a0%d0%25%e8D%93%fe%05%afB%96O%1d1%8c%01%87%b3%9b%83%e9%0f%98%10%ccZW%e1%bd%3a%b1e%98%118~~%1e%b97F%ebw%2a%fc_l4%dc%1c2%a00r%b9%df%3ep%b2%a2%d8%11%80%ebM%a4w5%e1b-g%c3%00%18%1f%02%c3%9a%9e%f6J%ee1%ca%e56%c9%a8~%ce%ab%f4%dd%f0%b2%3f%12%aa%c4%ae%8aA%3cE%d4%21%e1G%1f%99%9c%aeS%7b%256%fc%7bJ%a5%18%3d%23%eb%7f.%5c%7c%c1%29%f9F%ef%af%a8%fd%13%fc%99%c0y%ce%9em%a4%d6%c4%0bB%01%e55%d9u%e3+%e216%997T%b8%3cb%12%c5%7b%fc%b7y+5%8a.%96%92G9p%cb%fcW%5cTX%d7%b9U%ae%ba%40%85T%9d%ab6%02%a3.1%e5%e7s%ba%f8%c1%a5%3eQlv%9aD%be%c8%9f%c0%f1%11%17%cc%ae%83%be%d3%1cF%abg%a2%07%95%405%ef%5cr5h%bd%1b%3dMj1%29%eb%c3%daB%14.%92%04%7ba%add%40%3fZ%16w%963%d8p%3e%ca%f1%c4b%fb%d7%2c7%b3%ed%98%b6%ca%27%cd%ab%5e%dd%25%ef%b7%d1%fdNkw%16%d8%3d%3b%82%e7%9dt%1f5%a7%b0%d3%f1%01KKV%97%b2%21%f8~%1d%13%ae%24%5bd%c9U%27cM%00%03%1f%12%7f%c7z%a73%b5%1f%c6g4h%2f%a2%06%17%c7%3a%11%95%d1D%2b%12%87%ce%96%88%a7%af%a1%a6%a5z%7b%86%df%97%8f%251%a2%13%dc%91%3a%1fjGQ%cfcB%bea%7f%92%d3%80A%99%82%02%06%ff%ea%1ft%ae%a6_%95%e4%f0T%dfqv%be%5d%ac%d0%17%e1%403%f9%86%d6%92%a7%fc%9b%e4%09%ce%d1%b7mB%0a%0f%eb%f7%c3%28%5b%b3gy%3d%a3%17%c5%de%94%95%88%02HC%3eE_%d9%0a%c8%dd%21X-%d0%d1%97c%3a%3b%e8%d2%23%f3%3e%22%be%bf%80%bf%c4%ac%23%97%5cw%fcsFav%3a%905%ec%bb%89%93%f9%86%c2W%82%a2%a60%a8%c3O%fa~e%b6%1d%87%ef%b3%beMk%98%ec%05c%25%f5%07%fbc%8dY%bd%19%24%28%3c%03%d6%05%05%1c%5bZ%fa%f5%cc%eb%7c%3cnq%5b8%b9%2a%a6%c3%7c%a9%ac%d3%16%95%84%7d%99%3c%0f%85%d9QoNB%0eC%00%c7wJ%5eB%eb%cd%3a%92%5b%db%07%f2%03q4%fb%8d%2a%3a%0cC%96%1c%5dy%96%0b%0ca%0d%f7%cc%1f_%95%d1%2fq%f1%b3I%e3s%d9%3d%c2%8f%ad%d3%89%a9%d1%a3%19Y%f4q%24%13%01kR%60%f4%3bt%d0%87%0e%9d%ee%22%be%caS+%9a%bby%60%97%0d%07%ff%87F%ce%5e%f6F%ad%09%a0%bfHzP%cf%bb%3c%14%11%3e%07Q%5d%1a~%e9q%d0%f0%eb%1dtO%da1%b0%fb%9dp%0b_2p%09%1c%8b%93%87%d7y%da%ea%16%7dd%fd%8a%a5%92%c2%b5%ddQ%fd%fd~%d0%f4U%18%40%9a%88%9bD%b5%23%c6Z%0b%07i%bf%e3g%2a%98%fc%eeZw%f6%de%5b%03%03%98%ff%0eS%fd%b7w%5e%a9%08%10%1el%1e%7c%88%cd%18%8c%139%1e%bb%bbu%b0Zd%e2%a7M%95%05%ae%ccc%a2%e1%ca%05%7b%2c%bbsSs%c7w%bef%23%08%96%09O%f6%ec%96%e8%25I.%de%b4%9e%07%a2%a4%d7u%21%23%9e%ce~%c7m%fc%a8%a0%1d%e7i%ea%f0%0d%21%a3A%8f%fbP%3d%cf%fa3%b4U%01%aa%cb%09%0b%25%27%00%8b.%fc%ca%9c%a8%c6%8f%86%85%e3b%da%d2y2%c8%93%87%e2D%a7%c4
2013-12-16T21:18:26.301Z,1387228706.301 [DataOverHttps](INFO): Sending 1844 bytes from file Logs/20131216T211549/Express0001.lzma
2013-12-16T21:18:26.301Z,1387228706.301 [DataOverHttps](INFO): dataWriting
2013-12-16T21:18:26.307Z,1387228706.307 [DataOverHttps](INFO): Wrote 4861 bytes.
2013-12-16T21:18:26.697Z,1387228706.697 [DataOverHttps](INFO): dataRead
2013-12-16T21:18:26.977Z,1387228706.977 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:18:26.978Z,1387228706.978 [DVL_micro](INFO): Output Modes: No Response
2013-12-16T21:18:26.978Z,1387228706.978 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD2525

2013-12-16T21:18:27.093Z,1387228707.093 [DataOverHttps](INFO): dataRead
2013-12-16T21:18:27.095Z,1387228707.095 [DataOverHttps](INFO): Moved sent file to Logs/20131216T211549/Express0001.lzma.bak
2013-12-16T21:18:27.095Z,1387228707.095 [DataOverHttps](INFO): SBD MOMSN=271396
2013-12-16T21:18:27.095Z,1387228707.095 [DataOverHttps](INFO): disconnect
2013-12-16T21:18:28.072Z,1387228708.072 [DataOverHttps](INFO): tcpConnect
2013-12-16T21:18:28.984Z,1387228708.984 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:18:30.988Z,1387228710.988 [DVL_micro](INFO): NQ1 requested
2013-12-16T21:18:30.988Z,1387228710.988 [DVL_micro](INFO): Cycling power to configure device.
2013-12-16T21:18:31.737Z,1387228711.737 [Startup:StartupSatComms:B] Stopped
2013-12-16T21:18:31.737Z,1387228711.737 [Startup:StartupSatComms](INFO): Completed Startup:StartupSatComms
2013-12-16T21:18:31.737Z,1387228711.737 [Startup:StartupSatComms] Stopped
2013-12-16T21:18:31.738Z,1387228711.738 [Startup:StartupSatComms](INFO): Aggregate::uninitialize Startup:StartupSatComms
2013-12-16T21:18:31.738Z,1387228711.738 [Startup](INFO): Completed Startup
2013-12-16T21:18:31.738Z,1387228711.738 [Startup] Stopped
2013-12-16T21:18:31.739Z,1387228711.739 [Startup](INFO): Aggregate::uninitialize Startup
2013-12-16T21:18:31.739Z,1387228711.739 [Startup:A.GoToSurface] Stopped
2013-12-16T21:18:31.739Z,1387228711.739 [Startup:A.GoToSurface](DEBUG): Uninitialize GoToSurfaceComponent.
2013-12-16T21:18:31.858Z,1387228711.858 [DataOverHttps](INFO): tcpConnecting
2013-12-16T21:18:31.859Z,1387228711.859 [DataOverHttps](INFO): sslConnect
2013-12-16T21:18:31.860Z,1387228711.860 [DataOverHttps](INFO): sslConnecting
2013-12-16T21:18:31.893Z,1387228711.893 [MissionManager](IMPORTANT): Started mission Default
2013-12-16T21:18:31.893Z,1387228711.893 [Default] Running Loop=1
2013-12-16T21:18:31.893Z,1387228711.893 [Default](INFO): Aggregate::initialize Default
2013-12-16T21:18:31.893Z,1387228711.893 [Default:D.SetSpeed] Running Loop=1
2013-12-16T21:18:31.893Z,1387228711.893 [Default:D.SetSpeed](DEBUG): Initialize.
2013-12-16T21:18:31.894Z,1387228711.894 [Default:E.GoToSurface] Running Loop=1
2013-12-16T21:18:31.894Z,1387228711.894 [Default:E.GoToSurface](DEBUG): Initialize GoToSurfaceComponent.
2013-12-16T21:18:31.894Z,1387228711.894 [Default:Iridium] Running Loop=1
2013-12-16T21:18:31.894Z,1387228711.894 [Default:Iridium](INFO): Aggregate::initialize Default:Iridium
2013-12-16T21:18:31.894Z,1387228711.894 [Default:Iridium:A.SetSpeed] Running Loop=1
2013-12-16T21:18:31.894Z,1387228711.894 [Default:Iridium:A.SetSpeed](DEBUG): Initialize.
2013-12-16T21:18:31.894Z,1387228711.894 [Default:Iridium:B.GoToSurface] Running Loop=1
2013-12-16T21:18:31.894Z,1387228711.894 [Default:Iridium:B.GoToSurface](DEBUG): Initialize GoToSurfaceComponent.
2013-12-16T21:18:31.895Z,1387228711.895 [Default:E.GoToSurface] Running Loop=1
2013-12-16T21:18:31.900Z,1387228711.900 [Default:D.SetSpeed] Running Loop=1
2013-12-16T21:18:31.910Z,1387228711.910 [Default:Iridium:B.GoToSurface] Stopped
2013-12-16T21:18:31.910Z,1387228711.910 [Default:Iridium:B.GoToSurface](DEBUG): Uninitialize GoToSurfaceComponent.
2013-12-16T21:18:31.910Z,1387228711.910 [Default:Iridium:Read_Iridium] Running Loop=1
2013-12-16T21:18:31.910Z,1387228711.910 [Default:Iridium:A.SetSpeed] Running Loop=1
2013-12-16T21:18:31.915Z,1387228711.915 [Default:GPS] Running Loop=1
2013-12-16T21:18:31.915Z,1387228711.915 [Default:GPS](INFO): Aggregate::initialize Default:GPS
2013-12-16T21:18:31.915Z,1387228711.915 [Default:GPS:A.SetSpeed] Running Loop=1
2013-12-16T21:18:31.916Z,1387228711.916 [Default:GPS:A.SetSpeed](DEBUG): Initialize.
2013-12-16T21:18:31.916Z,1387228711.916 [Default:GPS:B.GoToSurface] Running Loop=1
2013-12-16T21:18:31.916Z,1387228711.916 [Default:GPS:B.GoToSurface](DEBUG): Initialize GoToSurfaceComponent.
2013-12-16T21:18:31.921Z,1387228711.921 [Default:GPS:B.GoToSurface] Stopped
2013-12-16T21:18:31.921Z,1387228711.921 [Default:GPS:B.GoToSurface](DEBUG): Uninitialize GoToSurfaceComponent.
2013-12-16T21:18:31.921Z,1387228711.921 [Default:GPS:Read_GPS] Running Loop=1
2013-12-16T21:18:31.921Z,1387228711.921 [Default:GPS:A.SetSpeed] Running Loop=1
2013-12-16T21:18:32.171Z,1387228712.171 [DataOverHttps](INFO): sslConnecting
2013-12-16T21:18:32.663Z,1387228712.663 [Default:Iridium:Read_Iridium](DEBUG): Initialize ReadDataComponent to sense platform_communications
2013-12-16T21:18:32.666Z,1387228712.666 [Default:GPS:Read_GPS](DEBUG): Initialize ReadDataComponent to sense latitude_fix
2013-12-16T21:18:32.991Z,1387228712.991 [DVL_micro](INFO): Opening uart, block timeout 10ths=20
2013-12-16T21:18:32.991Z,1387228712.991 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD1616 00 0

2013-12-16T21:18:33.275Z,1387228713.275 [DataOverHttps](INFO): sslConnecting
2013-12-16T21:18:33.277Z,1387228713.277 [DataOverHttps](INFO): dataWrite
2013-12-16T21:18:33.279Z,1387228713.279 [DataOverHttps](INFO): encoded 71 bytes: %5d%00%00%04%00%08%00%00%00%00%00%00%00%00%15%1d%80%03%0cVb%00%b8%f0%00
2013-12-16T21:18:33.280Z,1387228713.280 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20131216T211549/Courier0004.lzma
2013-12-16T21:18:33.280Z,1387228713.280 [DataOverHttps](INFO): dataWriting
2013-12-16T21:18:33.282Z,1387228713.282 [DataOverHttps](INFO): Wrote 343 bytes.
2013-12-16T21:18:33.308Z,1387228713.308 [CBIT](CRITICAL): Environmental Failure. Press:14.451184 PSI. Humidity:11%. Temp:21 C. ABORTING MISSION
2013-12-16T21:18:33.404Z,1387228713.404 [DataOverHttps](INFO): dataRead
2013-12-16T21:18:33.792Z,1387228713.792 [DataOverHttps](INFO): dataRead
2013-12-16T21:18:33.793Z,1387228713.793 [DataOverHttps](INFO): Moved sent file to Logs/20131216T211549/Courier0004.lzma.bak
2013-12-16T21:18:33.793Z,1387228713.793 [DataOverHttps](INFO): SBD MOMSN=271417
2013-12-16T21:18:33.793Z,1387228713.793 [DataOverHttps](INFO): disconnect
2013-12-16T21:18:34.714Z,1387228714.714 [DataOverHttps](INFO): tcpConnect
2013-12-16T21:18:34.755Z,1387228714.755 [DataOverHttps](INFO): tcpConnecting
2013-12-16T21:18:34.755Z,1387228714.755 [DataOverHttps](INFO): sslConnect
2013-12-16T21:18:34.756Z,1387228714.756 [DataOverHttps](INFO): sslConnecting
2013-12-16T21:18:34.994Z,1387228714.994 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:18:34.994Z,1387228714.994 [DVL_micro](INFO): Enabling NQ1 output
2013-12-16T21:18:34.994Z,1387228714.994 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD0505 01 1

2013-12-16T21:18:35.157Z,1387228715.157 [DataOverHttps](INFO): sslConnecting
2013-12-16T21:18:35.654Z,1387228715.654 [CBIT](INFO): Clearing failed count for component NAL9602
2013-12-16T21:18:35.654Z,1387228715.654 [NAL9602] No Fault, FailCount= 2
2013-12-16T21:18:35.701Z,1387228715.701 [DataOverHttps](INFO): sslConnecting
2013-12-16T21:18:35.707Z,1387228715.707 [DataOverHttps](INFO): dataWrite
2013-12-16T21:18:35.708Z,1387228715.708 [DataOverHttps](INFO): encoded 385 bytes: %5d%00%00%04%00%b7%00%00%00%00%00%00%00%00%15%1d%80%03%0cVb%02%a9%bb1%d5%f5%8b%fa%fch%3fI%16E%d7mP%be%f7%d2nS%60%f2%7ci%db0h%c3%1d%9eIF%2f%94%002g%e5%86%2f%03%e7%c2%bf%b5%9b%a4%dd%290%f8Q%b3%9d%fea%e8o%de%d9%5b%85%a2%ac%13%c8%01%f1%94%91%15%dc%9e%d8%e3%28%bd%cf%0a%fb%3ft%e5%03%88%9d%14%9d%9b%d0j%83%93%23%b3%c7%04h%88%deVn%00y%26%23%97%d7%90%97%aa%3dj~%fe%e5%86%db%1c%f1%cdM%e0t%ee%80
2013-12-16T21:18:35.709Z,1387228715.709 [DataOverHttps](INFO): Sending 149 bytes from file Logs/20131216T211549/Express0005.lzma
2013-12-16T21:18:35.709Z,1387228715.709 [DataOverHttps](INFO): dataWriting
2013-12-16T21:18:35.711Z,1387228715.711 [DataOverHttps](INFO): Wrote 658 bytes.
2013-12-16T21:18:35.717Z,1387228715.717 [NAL9602](INFO): Powering up NAL9602
2013-12-16T21:18:36.071Z,1387228716.071 [DataOverHttps](INFO): dataRead
2013-12-16T21:18:36.471Z,1387228716.471 [DataOverHttps](INFO): dataRead
2013-12-16T21:18:36.473Z,1387228716.473 [DataOverHttps](INFO): Moved sent file to Logs/20131216T211549/Express0005.lzma.bak
2013-12-16T21:18:36.473Z,1387228716.473 [DataOverHttps](INFO): SBD MOMSN=271419
2013-12-16T21:18:36.473Z,1387228716.473 [DataOverHttps](INFO): disconnect
2013-12-16T21:18:37.005Z,1387228717.005 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:18:37.005Z,1387228717.005 [DVL_micro](INFO): Querying output modes
2013-12-16T21:18:37.005Z,1387228717.005 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD0606

2013-12-16T21:18:37.399Z,1387228717.399 [DataOverHttps](INFO): tcpConnect
2013-12-16T21:18:39.016Z,1387228719.016 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:18:39.016Z,1387228719.016 [DVL_micro](INFO): Output Modes: No Response
2013-12-16T21:18:39.016Z,1387228719.016 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD2525

2013-12-16T21:18:40.992Z,1387228720.992 [Default:Iridium:Read_Iridium] Stopped
2013-12-16T21:18:40.993Z,1387228720.993 [Default:Iridium](INFO): Completed Default:Iridium
2013-12-16T21:18:40.993Z,1387228720.993 [Default:Iridium] Stopped
2013-12-16T21:18:40.993Z,1387228720.993 [Default:Iridium](INFO): Aggregate::uninitialize Default:Iridium
2013-12-16T21:18:40.993Z,1387228720.993 [Default:Iridium:A.SetSpeed] Stopped
2013-12-16T21:18:40.993Z,1387228720.993 [Default:Iridium:A.SetSpeed](DEBUG): Uninitialize.
2013-12-16T21:18:40.993Z,1387228720.993 [Default:F.Wait] Running Loop=1
2013-12-16T21:18:40.994Z,1387228720.994 [Default:F.Wait](DEBUG): Initialize Wait Component.
2013-12-16T21:18:41.019Z,1387228721.019 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:18:41.104Z,1387228721.104 [DataOverHttps](INFO): tcpConnecting
2013-12-16T21:18:41.104Z,1387228721.104 [DataOverHttps](INFO): sslConnect
2013-12-16T21:18:41.105Z,1387228721.105 [DataOverHttps](INFO): sslConnecting
2013-12-16T21:18:41.422Z,1387228721.422 [DataOverHttps](INFO): sslConnecting
2013-12-16T21:18:41.934Z,1387228721.934 [DataOverHttps](INFO): sslConnecting
2013-12-16T21:18:41.936Z,1387228721.936 [DataOverHttps](INFO): dataWrite
2013-12-16T21:18:41.937Z,1387228721.937 [DataOverHttps](INFO): dataWriting
2013-12-16T21:18:41.938Z,1387228721.938 [DataOverHttps](INFO): Wrote 206 bytes.
2013-12-16T21:18:42.337Z,1387228722.337 [DataOverHttps](INFO): dataRead
2013-12-16T21:18:42.737Z,1387228722.737 [DataOverHttps](INFO): dataRead
2013-12-16T21:18:42.738Z,1387228722.738 [DataOverHttps](INFO): disconnect
2013-12-16T21:18:43.031Z,1387228723.031 [DVL_micro](INFO): NQ1 requested
2013-12-16T21:18:43.031Z,1387228723.031 [DVL_micro](INFO): Cycling power to configure device.
2013-12-16T21:18:45.034Z,1387228725.034 [DVL_micro](INFO): Opening uart, block timeout 10ths=20
2013-12-16T21:18:45.034Z,1387228725.034 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD1616 00 0

2013-12-16T21:18:47.036Z,1387228727.036 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:18:47.037Z,1387228727.037 [DVL_micro](INFO): Enabling NQ1 output
2013-12-16T21:18:47.037Z,1387228727.037 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD0505 01 1

2013-12-16T21:18:48.362Z,1387228728.362 [NAL9602](ERROR): NAL9602 initialize uart error: serial timeout
2013-12-16T21:18:48.363Z,1387228728.363 [NAL9602] Communications Fault, FailCount= 1
2013-12-16T21:18:48.363Z,1387228728.363 [NAL9602](ERROR): Communications Fault
2013-12-16T21:18:48.401Z,1387228728.401 [CBIT](ERROR): Communications Fault in component: NAL9602
2013-12-16T21:18:48.509Z,1387228728.509 [NAL9602](INFO): Powering down
2013-12-16T21:18:49.044Z,1387228729.044 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:18:49.044Z,1387228729.044 [DVL_micro](INFO): Querying output modes
2013-12-16T21:18:49.044Z,1387228729.044 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD0606

2013-12-16T21:18:49.240Z,1387228729.240 [CBIT](INFO): Clearing failed state for component NAL9602
2013-12-16T21:18:49.241Z,1387228729.241 [NAL9602] No Fault, FailCount= 1
2013-12-16T21:18:51.055Z,1387228731.055 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:18:51.055Z,1387228731.055 [DVL_micro](INFO): Output Modes: No Response
2013-12-16T21:18:51.055Z,1387228731.055 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD2525

2013-12-16T21:18:53.058Z,1387228733.058 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:18:53.624Z,1387228733.624 [NAL9602](INFO): Powering up NAL9602
2013-12-16T21:18:55.062Z,1387228735.062 [DVL_micro](INFO): NQ1 requested
2013-12-16T21:18:55.062Z,1387228735.062 [DVL_micro](INFO): Cycling power to configure device.
2013-12-16T21:18:57.064Z,1387228737.064 [DVL_micro](INFO): Opening uart, block timeout 10ths=20
2013-12-16T21:18:57.065Z,1387228737.065 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD1616 00 0

2013-12-16T21:18:59.068Z,1387228739.068 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:18:59.068Z,1387228739.068 [DVL_micro](INFO): Enabling NQ1 output
2013-12-16T21:18:59.068Z,1387228739.068 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD0505 01 1

2013-12-16T21:19:01.076Z,1387228741.076 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:19:01.077Z,1387228741.077 [DVL_micro](INFO): Querying output modes
2013-12-16T21:19:01.077Z,1387228741.077 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD0606

2013-12-16T21:19:03.077Z,1387228743.077 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:19:03.078Z,1387228743.078 [DVL_micro](INFO): Output Modes: No Response
2013-12-16T21:19:03.078Z,1387228743.078 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD2525

2013-12-16T21:19:05.081Z,1387228745.081 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:19:06.439Z,1387228746.439 [NAL9602](ERROR): NAL9602 initialize uart error: serial timeout
2013-12-16T21:19:06.439Z,1387228746.439 [NAL9602] Communications Fault, FailCount= 2
2013-12-16T21:19:06.439Z,1387228746.439 [NAL9602](ERROR): Communications Fault
2013-12-16T21:19:06.495Z,1387228746.495 [CBIT](ERROR): Communications Fault in component: NAL9602
2013-12-16T21:19:06.496Z,1387228746.496 [CBIT](CRITICAL): Communications Fault in component: NAL9602
2013-12-16T21:19:06.549Z,1387228746.549 [NAL9602](INFO): Powering down
2013-12-16T21:19:07.092Z,1387228747.092 [DVL_micro](INFO): NQ1 requested
2013-12-16T21:19:07.092Z,1387228747.092 [DVL_micro](INFO): Cycling power to configure device.
2013-12-16T21:19:07.711Z,1387228747.711 [DataOverHttps](INFO): tcpConnect
2013-12-16T21:19:08.112Z,1387228748.112 [DataOverHttps](INFO): tcpConnecting
2013-12-16T21:19:08.112Z,1387228748.112 [DataOverHttps](INFO): sslConnect
2013-12-16T21:19:08.113Z,1387228748.113 [DataOverHttps](INFO): sslConnecting
2013-12-16T21:19:08.512Z,1387228748.512 [DataOverHttps](INFO): sslConnecting
2013-12-16T21:19:09.013Z,1387228749.013 [DataOverHttps](INFO): sslConnecting
2013-12-16T21:19:09.015Z,1387228749.015 [DataOverHttps](INFO): dataWrite
2013-12-16T21:19:09.015Z,1387228749.015 [DataOverHttps](INFO): dataWriting
2013-12-16T21:19:09.016Z,1387228749.016 [DataOverHttps](INFO): Wrote 206 bytes.
2013-12-16T21:19:09.095Z,1387228749.095 [DVL_micro](INFO): Opening uart, block timeout 10ths=20
2013-12-16T21:19:09.096Z,1387228749.096 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD1616 00 0

2013-12-16T21:19:09.417Z,1387228749.417 [DataOverHttps](INFO): dataRead
2013-12-16T21:19:09.815Z,1387228749.815 [DataOverHttps](INFO): dataRead
2013-12-16T21:19:09.816Z,1387228749.816 [DataOverHttps](INFO): disconnect
2013-12-16T21:19:11.106Z,1387228751.106 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:19:11.106Z,1387228751.106 [DVL_micro](INFO): Enabling NQ1 output
2013-12-16T21:19:11.106Z,1387228751.106 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD0505 01 1

2013-12-16T21:19:13.113Z,1387228753.113 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:19:13.113Z,1387228753.113 [DVL_micro](INFO): Querying output modes
2013-12-16T21:19:13.113Z,1387228753.113 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD0606

2013-12-16T21:19:15.116Z,1387228755.116 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:19:15.116Z,1387228755.116 [DVL_micro](INFO): Output Modes: No Response
2013-12-16T21:19:15.116Z,1387228755.116 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD2525

2013-12-16T21:19:17.119Z,1387228757.119 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:19:19.123Z,1387228759.123 [DVL_micro](INFO): NQ1 requested
2013-12-16T21:19:19.123Z,1387228759.123 [DVL_micro](INFO): Cycling power to configure device.
2013-12-16T21:19:21.126Z,1387228761.126 [DVL_micro](INFO): Opening uart, block timeout 10ths=20
2013-12-16T21:19:21.126Z,1387228761.126 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD1616 00 0

2013-12-16T21:19:23.128Z,1387228763.128 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:19:23.128Z,1387228763.128 [DVL_micro](INFO): Enabling NQ1 output
2013-12-16T21:19:23.129Z,1387228763.129 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD0505 01 1

2013-12-16T21:19:25.140Z,1387228765.140 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:19:25.140Z,1387228765.140 [DVL_micro](INFO): Querying output modes
2013-12-16T21:19:25.140Z,1387228765.140 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD0606

2013-12-16T21:19:27.151Z,1387228767.151 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:19:27.151Z,1387228767.151 [DVL_micro](INFO): Output Modes: No Response
2013-12-16T21:19:27.151Z,1387228767.151 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD2525

2013-12-16T21:19:29.158Z,1387228769.158 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:19:31.169Z,1387228771.169 [DVL_micro](INFO): NQ1 requested
2013-12-16T21:19:31.170Z,1387228771.170 [DVL_micro](INFO): Cycling power to configure device.
2013-12-16T21:19:33.172Z,1387228773.172 [DVL_micro](INFO): Opening uart, block timeout 10ths=20
2013-12-16T21:19:33.173Z,1387228773.173 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD1616 00 0

2013-12-16T21:19:35.179Z,1387228775.179 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:19:35.179Z,1387228775.179 [DVL_micro](INFO): Enabling NQ1 output
2013-12-16T21:19:35.179Z,1387228775.179 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD0505 01 1

2013-12-16T21:19:37.190Z,1387228777.190 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:19:37.190Z,1387228777.190 [DVL_micro](INFO): Querying output modes
2013-12-16T21:19:37.190Z,1387228777.190 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD0606

2013-12-16T21:19:37.815Z,1387228777.815 [DataOverHttps](INFO): tcpConnect
2013-12-16T21:19:38.215Z,1387228778.215 [DataOverHttps](INFO): tcpConnecting
2013-12-16T21:19:38.215Z,1387228778.215 [DataOverHttps](INFO): sslConnect
2013-12-16T21:19:38.217Z,1387228778.217 [DataOverHttps](INFO): sslConnecting
2013-12-16T21:19:38.616Z,1387228778.616 [DataOverHttps](INFO): sslConnecting
2013-12-16T21:19:39.127Z,1387228779.127 [DataOverHttps](INFO): sslConnecting
2013-12-16T21:19:39.129Z,1387228779.129 [DataOverHttps](INFO): dataWrite
2013-12-16T21:19:39.129Z,1387228779.129 [DataOverHttps](INFO): dataWriting
2013-12-16T21:19:39.130Z,1387228779.130 [DataOverHttps](INFO): Wrote 206 bytes.
2013-12-16T21:19:39.193Z,1387228779.193 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:19:39.193Z,1387228779.193 [DVL_micro](INFO): Output Modes: No Response
2013-12-16T21:19:39.194Z,1387228779.194 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD2525

2013-12-16T21:19:39.530Z,1387228779.530 [DataOverHttps](INFO): dataRead
2013-12-16T21:19:39.930Z,1387228779.930 [DataOverHttps](INFO): dataRead
2013-12-16T21:19:39.931Z,1387228779.931 [DataOverHttps](INFO): disconnect
2013-12-16T21:19:41.196Z,1387228781.196 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:19:43.200Z,1387228783.200 [DVL_micro](INFO): NQ1 requested
2013-12-16T21:19:43.200Z,1387228783.200 [DVL_micro](INFO): Cycling power to configure device.
2013-12-16T21:19:45.203Z,1387228785.203 [DVL_micro](INFO): Opening uart, block timeout 10ths=20
2013-12-16T21:19:45.204Z,1387228785.204 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD1616 00 0

2013-12-16T21:19:47.214Z,1387228787.214 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:19:47.214Z,1387228787.214 [DVL_micro](INFO): Enabling NQ1 output
2013-12-16T21:19:47.214Z,1387228787.214 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD0505 01 1

2013-12-16T21:19:49.217Z,1387228789.217 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:19:49.217Z,1387228789.217 [DVL_micro](INFO): Querying output modes
2013-12-16T21:19:49.217Z,1387228789.217 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD0606

2013-12-16T21:19:51.220Z,1387228791.220 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:19:51.220Z,1387228791.220 [DVL_micro](INFO): Output Modes: No Response
2013-12-16T21:19:51.220Z,1387228791.220 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD2525

2013-12-16T21:19:53.227Z,1387228793.227 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:19:55.235Z,1387228795.235 [DVL_micro](INFO): NQ1 requested
2013-12-16T21:19:55.235Z,1387228795.235 [DVL_micro](INFO): Cycling power to configure device.
2013-12-16T21:19:57.238Z,1387228797.238 [DVL_micro](INFO): Opening uart, block timeout 10ths=20
2013-12-16T21:19:57.238Z,1387228797.238 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD1616 00 0

2013-12-16T21:19:59.244Z,1387228799.244 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:19:59.244Z,1387228799.244 [DVL_micro](INFO): Enabling NQ1 output
2013-12-16T21:19:59.245Z,1387228799.245 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD0505 01 1

2013-12-16T21:20:01.247Z,1387228801.247 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:20:01.248Z,1387228801.248 [DVL_micro](INFO): Querying output modes
2013-12-16T21:20:01.248Z,1387228801.248 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD0606

2013-12-16T21:20:03.251Z,1387228803.251 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:20:03.251Z,1387228803.251 [DVL_micro](INFO): Output Modes: No Response
2013-12-16T21:20:03.251Z,1387228803.251 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD2525

2013-12-16T21:20:05.262Z,1387228805.262 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:20:07.267Z,1387228807.267 [DVL_micro](INFO): NQ1 requested
2013-12-16T21:20:07.267Z,1387228807.267 [DVL_micro](INFO): Cycling power to configure device.
2013-12-16T21:20:07.928Z,1387228807.928 [DataOverHttps](INFO): tcpConnect
2013-12-16T21:20:08.329Z,1387228808.329 [DataOverHttps](INFO): tcpConnecting
2013-12-16T21:20:08.329Z,1387228808.329 [DataOverHttps](INFO): sslConnect
2013-12-16T21:20:08.330Z,1387228808.330 [DataOverHttps](INFO): sslConnecting
2013-12-16T21:20:08.730Z,1387228808.730 [DataOverHttps](INFO): sslConnecting
2013-12-16T21:20:09.234Z,1387228809.234 [DataOverHttps](INFO): sslConnecting
2013-12-16T21:20:09.236Z,1387228809.236 [DataOverHttps](INFO): dataWrite
2013-12-16T21:20:09.236Z,1387228809.236 [DataOverHttps](INFO): dataWriting
2013-12-16T21:20:09.238Z,1387228809.238 [DataOverHttps](INFO): Wrote 206 bytes.
2013-12-16T21:20:09.272Z,1387228809.272 [DVL_micro](INFO): Opening uart, block timeout 10ths=20
2013-12-16T21:20:09.273Z,1387228809.273 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD1616 00 0

2013-12-16T21:20:09.635Z,1387228809.635 [DataOverHttps](INFO): dataRead
2013-12-16T21:20:10.036Z,1387228810.036 [DataOverHttps](INFO): dataRead
2013-12-16T21:20:10.037Z,1387228810.037 [DataOverHttps](INFO): disconnect
2013-12-16T21:20:11.275Z,1387228811.275 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:20:11.275Z,1387228811.275 [DVL_micro](INFO): Enabling NQ1 output
2013-12-16T21:20:11.275Z,1387228811.275 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD0505 01 1

2013-12-16T21:20:13.278Z,1387228813.278 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:20:13.278Z,1387228813.278 [DVL_micro](INFO): Querying output modes
2013-12-16T21:20:13.278Z,1387228813.278 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD0606

2013-12-16T21:20:15.285Z,1387228815.285 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:20:15.285Z,1387228815.285 [DVL_micro](INFO): Output Modes: No Response
2013-12-16T21:20:15.286Z,1387228815.286 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD2525

2013-12-16T21:20:17.296Z,1387228817.296 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:20:19.308Z,1387228819.308 [DVL_micro](INFO): NQ1 requested
2013-12-16T21:20:19.308Z,1387228819.308 [DVL_micro](INFO): Cycling power to configure device.
2013-12-16T21:20:21.311Z,1387228821.311 [DVL_micro](INFO): Opening uart, block timeout 10ths=20
2013-12-16T21:20:21.311Z,1387228821.311 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD1616 00 0

2013-12-16T21:20:23.322Z,1387228823.322 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:20:23.322Z,1387228823.322 [DVL_micro](INFO): Enabling NQ1 output
2013-12-16T21:20:23.322Z,1387228823.322 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD0505 01 1

2013-12-16T21:20:25.333Z,1387228825.333 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:20:25.333Z,1387228825.333 [DVL_micro](INFO): Querying output modes
2013-12-16T21:20:25.333Z,1387228825.333 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD0606

2013-12-16T21:20:27.344Z,1387228827.344 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:20:27.344Z,1387228827.344 [DVL_micro](INFO): Output Modes: No Response
2013-12-16T21:20:27.344Z,1387228827.344 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD2525

2013-12-16T21:20:29.351Z,1387228829.351 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:20:31.359Z,1387228831.359 [DVL_micro](INFO): NQ1 requested
2013-12-16T21:20:31.359Z,1387228831.359 [DVL_micro](INFO): Cycling power to configure device.
2013-12-16T21:20:33.362Z,1387228833.362 [DVL_micro](INFO): Opening uart, block timeout 10ths=20
2013-12-16T21:20:33.362Z,1387228833.362 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD1616 00 0

2013-12-16T21:20:35.368Z,1387228835.368 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:20:35.368Z,1387228835.368 [DVL_micro](INFO): Enabling NQ1 output
2013-12-16T21:20:35.369Z,1387228835.369 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD0505 01 1

2013-12-16T21:20:37.371Z,1387228837.371 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:20:37.372Z,1387228837.372 [DVL_micro](INFO): Querying output modes
2013-12-16T21:20:37.372Z,1387228837.372 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD0606

2013-12-16T21:20:38.036Z,1387228838.036 [DataOverHttps](INFO): tcpConnect
2013-12-16T21:20:38.436Z,1387228838.436 [DataOverHttps](INFO): tcpConnecting
2013-12-16T21:20:38.436Z,1387228838.436 [DataOverHttps](INFO): sslConnect
2013-12-16T21:20:38.438Z,1387228838.438 [DataOverHttps](INFO): sslConnecting
2013-12-16T21:20:38.837Z,1387228838.837 [DataOverHttps](INFO): sslConnecting
2013-12-16T21:20:39.347Z,1387228839.347 [DataOverHttps](INFO): sslConnecting
2013-12-16T21:20:39.349Z,1387228839.349 [DataOverHttps](INFO): dataWrite
2013-12-16T21:20:39.349Z,1387228839.349 [DataOverHttps](INFO): dataWriting
2013-12-16T21:20:39.350Z,1387228839.350 [DataOverHttps](INFO): Wrote 206 bytes.
2013-12-16T21:20:39.399Z,1387228839.399 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:20:39.399Z,1387228839.399 [DVL_micro](INFO): Output Modes: No Response
2013-12-16T21:20:39.399Z,1387228839.399 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD2525

2013-12-16T21:20:39.753Z,1387228839.753 [DataOverHttps](INFO): dataRead
2013-12-16T21:20:40.151Z,1387228840.151 [DataOverHttps](INFO): dataRead
2013-12-16T21:20:40.152Z,1387228840.152 [DataOverHttps](INFO): disconnect
2013-12-16T21:20:41.410Z,1387228841.410 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:20:43.413Z,1387228843.413 [DVL_micro](INFO): NQ1 requested
2013-12-16T21:20:43.414Z,1387228843.414 [DVL_micro](INFO): Cycling power to configure device.
2013-12-16T21:20:45.416Z,1387228845.416 [DVL_micro](INFO): Opening uart, block timeout 10ths=20
2013-12-16T21:20:45.417Z,1387228845.417 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD1616 00 0

2013-12-16T21:20:47.423Z,1387228847.423 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:20:47.423Z,1387228847.423 [DVL_micro](INFO): Enabling NQ1 output
2013-12-16T21:20:47.423Z,1387228847.423 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD0505 01 1

2013-12-16T21:20:49.434Z,1387228849.434 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:20:49.434Z,1387228849.434 [DVL_micro](INFO): Querying output modes
2013-12-16T21:20:49.434Z,1387228849.434 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD0606

2013-12-16T21:20:51.445Z,1387228851.445 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:20:51.445Z,1387228851.445 [DVL_micro](INFO): Output Modes: No Response
2013-12-16T21:20:51.446Z,1387228851.446 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD2525

2013-12-16T21:20:53.456Z,1387228853.456 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:20:55.464Z,1387228855.464 [DVL_micro](INFO): NQ1 requested
2013-12-16T21:20:55.465Z,1387228855.465 [DVL_micro](INFO): Cycling power to configure device.
2013-12-16T21:20:57.467Z,1387228857.467 [DVL_micro](INFO): Opening uart, block timeout 10ths=20
2013-12-16T21:20:57.467Z,1387228857.467 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD1616 00 0

2013-12-16T21:20:59.470Z,1387228859.470 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:20:59.470Z,1387228859.470 [DVL_micro](INFO): Enabling NQ1 output
2013-12-16T21:20:59.470Z,1387228859.470 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD0505 01 1

2013-12-16T21:21:01.477Z,1387228861.477 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:21:01.477Z,1387228861.477 [DVL_micro](INFO): Querying output modes
2013-12-16T21:21:01.477Z,1387228861.477 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD0606

2013-12-16T21:21:03.484Z,1387228863.484 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:21:03.484Z,1387228863.484 [DVL_micro](INFO): Output Modes: No Response
2013-12-16T21:21:03.484Z,1387228863.484 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD2525

2013-12-16T21:21:05.495Z,1387228865.495 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:21:06.588Z,1387228866.588 [CBIT](INFO): Clearing failed count for component NAL9602
2013-12-16T21:21:06.588Z,1387228866.588 [NAL9602] No Fault, FailCount= 2
2013-12-16T21:21:06.951Z,1387228866.951 [NAL9602](INFO): Powering up NAL9602
2013-12-16T21:21:07.507Z,1387228867.507 [DVL_micro](INFO): NQ1 requested
2013-12-16T21:21:07.507Z,1387228867.507 [DVL_micro](INFO): Cycling power to configure device.
2013-12-16T21:21:08.150Z,1387228868.150 [DataOverHttps](INFO): tcpConnect
2013-12-16T21:21:08.551Z,1387228868.551 [DataOverHttps](INFO): tcpConnecting
2013-12-16T21:21:08.551Z,1387228868.551 [DataOverHttps](INFO): sslConnect
2013-12-16T21:21:08.552Z,1387228868.552 [DataOverHttps](INFO): sslConnecting
2013-12-16T21:21:08.947Z,1387228868.947 [DataOverHttps](INFO): sslConnecting
2013-12-16T21:21:09.451Z,1387228869.451 [DataOverHttps](INFO): sslConnecting
2013-12-16T21:21:09.453Z,1387228869.453 [DataOverHttps](INFO): dataWrite
2013-12-16T21:21:09.453Z,1387228869.453 [DataOverHttps](INFO): dataWriting
2013-12-16T21:21:09.454Z,1387228869.454 [DataOverHttps](INFO): Wrote 206 bytes.
2013-12-16T21:21:09.510Z,1387228869.510 [DVL_micro](INFO): Opening uart, block timeout 10ths=20
2013-12-16T21:21:09.510Z,1387228869.510 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD1616 00 0

2013-12-16T21:21:09.853Z,1387228869.853 [DataOverHttps](INFO): dataRead
2013-12-16T21:21:10.254Z,1387228870.254 [DataOverHttps](INFO): dataRead
2013-12-16T21:21:10.255Z,1387228870.255 [DataOverHttps](INFO): disconnect
2013-12-16T21:21:11.512Z,1387228871.512 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:21:11.513Z,1387228871.513 [DVL_micro](INFO): Enabling NQ1 output
2013-12-16T21:21:11.513Z,1387228871.513 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD0505 01 1

2013-12-16T21:21:13.524Z,1387228873.524 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:21:13.524Z,1387228873.524 [DVL_micro](INFO): Querying output modes
2013-12-16T21:21:13.524Z,1387228873.524 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD0606

2013-12-16T21:21:15.492Z,1387228875.492 [CBIT](INFO): Clearing failed count for component AHRS_sp3003D
2013-12-16T21:21:15.492Z,1387228875.492 [AHRS_sp3003D] No Fault, FailCount= 5
2013-12-16T21:21:15.535Z,1387228875.535 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:21:15.535Z,1387228875.535 [DVL_micro](INFO): Output Modes: No Response
2013-12-16T21:21:15.535Z,1387228875.535 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD2525

2013-12-16T21:21:15.855Z,1387228875.855 [AHRS_sp3003D](DEBUG): Initializing AHRS_sp3003D.
2013-12-16T21:21:16.997Z,1387228876.997 [AHRS_sp3003D](ERROR): readHeadingMagBin UART error: serial timeout
2013-12-16T21:21:16.997Z,1387228876.997 [AHRS_sp3003D](ERROR): SP3003D failed to initialize
2013-12-16T21:21:16.997Z,1387228876.997 [AHRS_sp3003D] Hardware Fault, FailCount= 1
2013-12-16T21:21:16.997Z,1387228876.997 [AHRS_sp3003D](ERROR): Hardware Fault
2013-12-16T21:21:17.029Z,1387228877.029 [CBIT](ERROR): Hardware Fault in component: AHRS_sp3003D
2013-12-16T21:21:17.053Z,1387228877.053 [AHRS_sp3003D](INFO): Powering down
2013-12-16T21:21:17.546Z,1387228877.546 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:21:19.156Z,1387228879.156 [NAL9602](ERROR): NAL9602 initialize uart error: serial timeout
2013-12-16T21:21:19.156Z,1387228879.156 [NAL9602] Communications Fault, FailCount= 1
2013-12-16T21:21:19.156Z,1387228879.156 [NAL9602](ERROR): Communications Fault
2013-12-16T21:21:19.196Z,1387228879.196 [CBIT](ERROR): Communications Fault in component: NAL9602
2013-12-16T21:21:19.258Z,1387228879.258 [NAL9602](INFO): Powering down
2013-12-16T21:21:19.549Z,1387228879.549 [DVL_micro](INFO): NQ1 requested
2013-12-16T21:21:19.550Z,1387228879.550 [DVL_micro](INFO): Cycling power to configure device.
2013-12-16T21:21:19.648Z,1387228879.648 [CBIT](INFO): Clearing failed state for component AHRS_sp3003D
2013-12-16T21:21:19.649Z,1387228879.649 [AHRS_sp3003D] No Fault, FailCount= 1
2013-12-16T21:21:20.013Z,1387228880.013 [AHRS_sp3003D](DEBUG): Initializing AHRS_sp3003D.
2013-12-16T21:21:20.040Z,1387228880.040 [CBIT](INFO): Clearing failed state for component NAL9602
2013-12-16T21:21:20.040Z,1387228880.040 [NAL9602] No Fault, FailCount= 1
2013-12-16T21:21:21.151Z,1387228881.151 [AHRS_sp3003D](ERROR): readHeadingMagBin UART error: serial timeout
2013-12-16T21:21:21.151Z,1387228881.151 [AHRS_sp3003D](ERROR): SP3003D failed to initialize
2013-12-16T21:21:21.152Z,1387228881.152 [AHRS_sp3003D] Hardware Fault, FailCount= 2
2013-12-16T21:21:21.152Z,1387228881.152 [AHRS_sp3003D](ERROR): Hardware Fault
2013-12-16T21:21:21.204Z,1387228881.204 [CBIT](INFO): Clearing failed count for component MassServo
2013-12-16T21:21:21.204Z,1387228881.204 [MassServo] No Fault, FailCount= 5
2013-12-16T21:21:21.205Z,1387228881.205 [CBIT](ERROR): Hardware Fault in component: AHRS_sp3003D
2013-12-16T21:21:21.217Z,1387228881.217 [AHRS_sp3003D](INFO): Powering down
2013-12-16T21:21:21.552Z,1387228881.552 [DVL_micro](INFO): Opening uart, block timeout 10ths=20
2013-12-16T21:21:21.553Z,1387228881.553 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD1616 00 0

2013-12-16T21:21:22.954Z,1387228882.954 [MassServo](FAULT): Mass shifter EEPROM initialization uart error serial timeout
2013-12-16T21:21:22.954Z,1387228882.954 [MassServo] Communications Fault, FailCount= 1
2013-12-16T21:21:22.954Z,1387228882.954 [MassServo](ERROR): Communications Fault
2013-12-16T21:21:22.958Z,1387228882.958 [CBIT](ERROR): Communications Fault in component: MassServo
2013-12-16T21:21:22.958Z,1387228882.958 [CBIT](INFO): Clearing failed state for component AHRS_sp3003D
2013-12-16T21:21:22.958Z,1387228882.958 [AHRS_sp3003D] No Fault, FailCount= 2
2013-12-16T21:21:22.979Z,1387228882.979 [AHRS_sp3003D](DEBUG): Initializing AHRS_sp3003D.
2013-12-16T21:21:23.032Z,1387228883.032 [MassServo](DEBUG): Uninitialize Mass Servo.
2013-12-16T21:21:23.032Z,1387228883.032 [MassServo](INFO): Powering down
2013-12-16T21:21:23.559Z,1387228883.559 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:21:23.559Z,1387228883.559 [DVL_micro](INFO): Enabling NQ1 output
2013-12-16T21:21:23.559Z,1387228883.559 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD0505 01 1

2013-12-16T21:21:24.112Z,1387228884.112 [AHRS_sp3003D](ERROR): readHeadingMagBin UART error: serial timeout
2013-12-16T21:21:24.112Z,1387228884.112 [AHRS_sp3003D](ERROR): SP3003D failed to initialize
2013-12-16T21:21:24.112Z,1387228884.112 [AHRS_sp3003D] Hardware Fault, FailCount= 3
2013-12-16T21:21:24.112Z,1387228884.112 [AHRS_sp3003D](ERROR): Hardware Fault
2013-12-16T21:21:24.141Z,1387228884.141 [MassServo](DEBUG): Initializing EZServoServo.
2013-12-16T21:21:24.257Z,1387228884.257 [MassServo](DEBUG): Initializing MassServo.
2013-12-16T21:21:24.261Z,1387228884.261 [CBIT](INFO): Clearing failed state for component MassServo
2013-12-16T21:21:24.261Z,1387228884.261 [MassServo] No Fault, FailCount= 1
2013-12-16T21:21:24.261Z,1387228884.261 [CBIT](ERROR): Hardware Fault in component: AHRS_sp3003D
2013-12-16T21:21:24.289Z,1387228884.289 [AHRS_sp3003D](INFO): Powering down
2013-12-16T21:21:24.386Z,1387228884.386 [NAL9602](INFO): Powering up NAL9602
2013-12-16T21:21:25.505Z,1387228885.505 [CBIT](INFO): Clearing failed state for component AHRS_sp3003D
2013-12-16T21:21:25.505Z,1387228885.505 [AHRS_sp3003D] No Fault, FailCount= 3
2013-12-16T21:21:25.562Z,1387228885.562 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:21:25.562Z,1387228885.562 [DVL_micro](INFO): Querying output modes
2013-12-16T21:21:25.563Z,1387228885.563 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD0606

2013-12-16T21:21:25.879Z,1387228885.879 [AHRS_sp3003D](DEBUG): Initializing AHRS_sp3003D.
2013-12-16T21:21:26.820Z,1387228886.820 [MassServo](FAULT): Mass shifter EEPROM initialization uart error serial timeout
2013-12-16T21:21:26.820Z,1387228886.820 [MassServo] Communications Fault, FailCount= 2
2013-12-16T21:21:26.821Z,1387228886.821 [MassServo](ERROR): Communications Fault
2013-12-16T21:21:26.824Z,1387228886.824 [CBIT](ERROR): Communications Fault in component: MassServo
2013-12-16T21:21:27.173Z,1387228887.173 [AHRS_sp3003D](ERROR): readHeadingMagBin UART error: serial timeout
2013-12-16T21:21:27.173Z,1387228887.173 [AHRS_sp3003D](ERROR): SP3003D failed to initialize
2013-12-16T21:21:27.173Z,1387228887.173 [AHRS_sp3003D] Hardware Fault, FailCount= 4
2013-12-16T21:21:27.173Z,1387228887.173 [AHRS_sp3003D](ERROR): Hardware Fault
2013-12-16T21:21:27.197Z,1387228887.197 [MassServo](DEBUG): Uninitialize Mass Servo.
2013-12-16T21:21:27.197Z,1387228887.197 [MassServo](INFO): Powering down
2013-12-16T21:21:27.201Z,1387228887.201 [CBIT](ERROR): Hardware Fault in component: AHRS_sp3003D
2013-12-16T21:21:27.240Z,1387228887.240 [AHRS_sp3003D](INFO): Powering down
2013-12-16T21:21:27.565Z,1387228887.565 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:21:27.565Z,1387228887.565 [DVL_micro](INFO): Output Modes: No Response
2013-12-16T21:21:27.566Z,1387228887.566 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD2525

2013-12-16T21:21:27.691Z,1387228887.691 [MassServo](DEBUG): Initializing EZServoServo.
2013-12-16T21:21:27.811Z,1387228887.811 [MassServo](DEBUG): Initializing MassServo.
2013-12-16T21:21:27.814Z,1387228887.814 [CBIT](INFO): Clearing failed state for component MassServo
2013-12-16T21:21:27.814Z,1387228887.814 [MassServo] No Fault, FailCount= 2
2013-12-16T21:21:28.490Z,1387228888.490 [CBIT](INFO): Clearing failed state for component AHRS_sp3003D
2013-12-16T21:21:28.490Z,1387228888.490 [AHRS_sp3003D] No Fault, FailCount= 4
2013-12-16T21:21:28.839Z,1387228888.839 [AHRS_sp3003D](DEBUG): Initializing AHRS_sp3003D.
2013-12-16T21:21:29.572Z,1387228889.572 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:21:29.973Z,1387228889.973 [AHRS_sp3003D](ERROR): readHeadingMagBin UART error: serial timeout
2013-12-16T21:21:29.973Z,1387228889.973 [AHRS_sp3003D](ERROR): SP3003D failed to initialize
2013-12-16T21:21:29.973Z,1387228889.973 [AHRS_sp3003D] Hardware Fault, FailCount= 5
2013-12-16T21:21:29.973Z,1387228889.973 [AHRS_sp3003D](ERROR): Hardware Fault
2013-12-16T21:21:30.510Z,1387228890.510 [MassServo](FAULT): Mass shifter EEPROM initialization uart error serial timeout
2013-12-16T21:21:30.510Z,1387228890.510 [MassServo] Communications Fault, FailCount= 3
2013-12-16T21:21:30.510Z,1387228890.510 [MassServo](ERROR): Communications Fault
2013-12-16T21:21:30.513Z,1387228890.513 [CBIT](ERROR): Communications Fault in component: MassServo
2013-12-16T21:21:30.514Z,1387228890.514 [CBIT](ERROR): Hardware Fault in component: AHRS_sp3003D
2013-12-16T21:21:30.514Z,1387228890.514 [CBIT](CRITICAL): Hardware Fault in component: AHRS_sp3003D
2013-12-16T21:21:30.533Z,1387228890.533 [AHRS_sp3003D](INFO): Powering down
2013-12-16T21:21:30.647Z,1387228890.647 [MassServo](DEBUG): Uninitialize Mass Servo.
2013-12-16T21:21:30.647Z,1387228890.647 [MassServo](INFO): Powering down
2013-12-16T21:21:31.353Z,1387228891.353 [MassServo](DEBUG): Initializing EZServoServo.
2013-12-16T21:21:31.472Z,1387228891.472 [MassServo](DEBUG): Initializing MassServo.
2013-12-16T21:21:31.476Z,1387228891.476 [CBIT](INFO): Clearing failed state for component MassServo
2013-12-16T21:21:31.476Z,1387228891.476 [MassServo] No Fault, FailCount= 3
2013-12-16T21:21:31.580Z,1387228891.580 [DVL_micro](INFO): NQ1 requested
2013-12-16T21:21:31.580Z,1387228891.580 [DVL_micro](INFO): Cycling power to configure device.
2013-12-16T21:21:33.583Z,1387228893.583 [DVL_micro](INFO): Opening uart, block timeout 10ths=20
2013-12-16T21:21:33.583Z,1387228893.583 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD1616 00 0

2013-12-16T21:21:33.868Z,1387228893.868 [MassServo](FAULT): Mass shifter EEPROM initialization uart error serial timeout
2013-12-16T21:21:33.868Z,1387228893.868 [MassServo] Communications Fault, FailCount= 4
2013-12-16T21:21:33.868Z,1387228893.868 [MassServo](ERROR): Communications Fault
2013-12-16T21:21:33.872Z,1387228893.872 [CBIT](ERROR): Communications Fault in component: MassServo
2013-12-16T21:21:33.909Z,1387228893.909 [MassServo](DEBUG): Uninitialize Mass Servo.
2013-12-16T21:21:33.909Z,1387228893.909 [MassServo](INFO): Powering down
2013-12-16T21:21:34.718Z,1387228894.718 [MassServo](DEBUG): Initializing EZServoServo.
2013-12-16T21:21:34.837Z,1387228894.837 [MassServo](DEBUG): Initializing MassServo.
2013-12-16T21:21:34.841Z,1387228894.841 [CBIT](INFO): Clearing failed state for component MassServo
2013-12-16T21:21:34.841Z,1387228894.841 [MassServo] No Fault, FailCount= 4
2013-12-16T21:21:35.594Z,1387228895.594 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:21:35.594Z,1387228895.594 [DVL_micro](INFO): Enabling NQ1 output
2013-12-16T21:21:35.594Z,1387228895.594 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD0505 01 1

2013-12-16T21:21:37.108Z,1387228897.108 [NAL9602](ERROR): NAL9602 initialize uart error: serial timeout
2013-12-16T21:21:37.108Z,1387228897.108 [NAL9602] Communications Fault, FailCount= 2
2013-12-16T21:21:37.108Z,1387228897.108 [NAL9602](ERROR): Communications Fault
2013-12-16T21:21:37.156Z,1387228897.156 [CBIT](ERROR): Communications Fault in component: NAL9602
2013-12-16T21:21:37.159Z,1387228897.159 [CBIT](CRITICAL): Communications Fault in component: NAL9602
2013-12-16T21:21:37.237Z,1387228897.237 [NAL9602](INFO): Powering down
2013-12-16T21:21:37.601Z,1387228897.601 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:21:37.601Z,1387228897.601 [DVL_micro](INFO): Querying output modes
2013-12-16T21:21:37.601Z,1387228897.601 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD0606

2013-12-16T21:21:38.379Z,1387228898.379 [DataOverHttps](INFO): tcpConnect
2013-12-16T21:21:38.907Z,1387228898.907 [MassServo](FAULT): Mass shifter EEPROM initialization uart error serial timeout
2013-12-16T21:21:38.907Z,1387228898.907 [MassServo] Communications Fault, FailCount= 5
2013-12-16T21:21:38.907Z,1387228898.907 [MassServo](ERROR): Communications Fault
2013-12-16T21:21:38.910Z,1387228898.910 [CBIT](ERROR): Communications Fault in component: MassServo
2013-12-16T21:21:38.911Z,1387228898.911 [CBIT](CRITICAL): Communications Fault in component: MassServo
2013-12-16T21:21:38.924Z,1387228898.924 [DataOverHttps](INFO): tcpConnecting
2013-12-16T21:21:38.924Z,1387228898.924 [DataOverHttps](INFO): sslConnect
2013-12-16T21:21:38.926Z,1387228898.926 [DataOverHttps](INFO): sslConnecting
2013-12-16T21:21:38.952Z,1387228898.952 [MassServo](DEBUG): Uninitialize Mass Servo.
2013-12-16T21:21:38.953Z,1387228898.953 [MassServo](INFO): Powering down
2013-12-16T21:21:39.326Z,1387228899.326 [DataOverHttps](INFO): sslConnecting
2013-12-16T21:21:39.604Z,1387228899.604 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:21:39.604Z,1387228899.604 [DVL_micro](INFO): Output Modes: No Response
2013-12-16T21:21:39.604Z,1387228899.604 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD2525

2013-12-16T21:21:39.843Z,1387228899.843 [DataOverHttps](INFO): sslConnecting
2013-12-16T21:21:39.845Z,1387228899.845 [DataOverHttps](INFO): dataWrite
2013-12-16T21:21:39.845Z,1387228899.845 [DataOverHttps](INFO): dataWriting
2013-12-16T21:21:39.846Z,1387228899.846 [DataOverHttps](INFO): Wrote 206 bytes.
2013-12-16T21:21:39.934Z,1387228899.934 [MassServo](DEBUG): Initializing EZServoServo.
2013-12-16T21:21:40.050Z,1387228900.050 [MassServo](DEBUG): Initializing MassServo.
2013-12-16T21:21:40.244Z,1387228900.244 [DataOverHttps](INFO): dataRead
2013-12-16T21:21:40.645Z,1387228900.645 [DataOverHttps](INFO): dataRead
2013-12-16T21:21:40.645Z,1387228900.645 [DataOverHttps](INFO): disconnect
2013-12-16T21:21:41.611Z,1387228901.611 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:21:43.619Z,1387228903.619 [DVL_micro](INFO): NQ1 requested
2013-12-16T21:21:43.620Z,1387228903.620 [DVL_micro](INFO): Cycling power to configure device.
2013-12-16T21:21:45.622Z,1387228905.622 [DVL_micro](INFO): Opening uart, block timeout 10ths=20
2013-12-16T21:21:45.622Z,1387228905.622 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD1616 00 0

2013-12-16T21:21:47.624Z,1387228907.624 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:21:47.625Z,1387228907.625 [DVL_micro](INFO): Enabling NQ1 output
2013-12-16T21:21:47.625Z,1387228907.625 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD0505 01 1

2013-12-16T21:21:49.632Z,1387228909.632 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:21:49.632Z,1387228909.632 [DVL_micro](INFO): Querying output modes
2013-12-16T21:21:49.632Z,1387228909.632 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD0606

2013-12-16T21:21:51.643Z,1387228911.643 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:21:51.643Z,1387228911.643 [DVL_micro](INFO): Output Modes: No Response
2013-12-16T21:21:51.643Z,1387228911.643 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD2525

2013-12-16T21:21:53.650Z,1387228913.650 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:21:55.653Z,1387228915.653 [DVL_micro](INFO): NQ1 requested
2013-12-16T21:21:55.654Z,1387228915.654 [DVL_micro](INFO): Cycling power to configure device.
2013-12-16T21:21:57.656Z,1387228917.656 [DVL_micro](INFO): Opening uart, block timeout 10ths=20
2013-12-16T21:21:57.657Z,1387228917.657 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD1616 00 0

2013-12-16T21:21:59.669Z,1387228919.669 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:21:59.669Z,1387228919.669 [DVL_micro](INFO): Enabling NQ1 output
2013-12-16T21:21:59.669Z,1387228919.669 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD0505 01 1

2013-12-16T21:22:01.678Z,1387228921.678 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:22:01.678Z,1387228921.678 [DVL_micro](INFO): Querying output modes
2013-12-16T21:22:01.679Z,1387228921.679 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD0606

2013-12-16T21:22:03.681Z,1387228923.681 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:22:03.681Z,1387228923.681 [DVL_micro](INFO): Output Modes: No Response
2013-12-16T21:22:03.682Z,1387228923.682 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD2525

2013-12-16T21:22:05.692Z,1387228925.692 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:22:06.286Z,1387228926.286 [CBIT](INFO): Clearing failed count for component DAT
2013-12-16T21:22:06.286Z,1387228926.286 [DAT] No Fault, FailCount= 3
2013-12-16T21:22:06.657Z,1387228926.657 [DAT](INFO): Powering up
2013-12-16T21:22:06.657Z,1387228926.657 [DAT](DEBUG): Initializing DAT.
2013-12-16T21:22:07.696Z,1387228927.696 [DVL_micro](INFO): NQ1 requested
2013-12-16T21:22:07.696Z,1387228927.696 [DVL_micro](INFO): Cycling power to configure device.
2013-12-16T21:22:08.644Z,1387228928.644 [DataOverHttps](INFO): tcpConnect
2013-12-16T21:22:09.045Z,1387228929.045 [DataOverHttps](INFO): tcpConnecting
2013-12-16T21:22:09.045Z,1387228929.045 [DataOverHttps](INFO): sslConnect
2013-12-16T21:22:09.046Z,1387228929.046 [DataOverHttps](INFO): sslConnecting
2013-12-16T21:22:09.445Z,1387228929.445 [DataOverHttps](INFO): sslConnecting
2013-12-16T21:22:09.699Z,1387228929.699 [DVL_micro](INFO): Opening uart, block timeout 10ths=20
2013-12-16T21:22:09.699Z,1387228929.699 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD1616 00 0

2013-12-16T21:22:09.958Z,1387228929.958 [DataOverHttps](INFO): sslConnecting
2013-12-16T21:22:09.960Z,1387228929.960 [DataOverHttps](INFO): dataWrite
2013-12-16T21:22:09.960Z,1387228929.960 [DataOverHttps](INFO): dataWriting
2013-12-16T21:22:09.962Z,1387228929.962 [DataOverHttps](INFO): Wrote 206 bytes.
2013-12-16T21:22:10.359Z,1387228930.359 [DataOverHttps](INFO): dataRead
2013-12-16T21:22:10.759Z,1387228930.759 [DataOverHttps](INFO): dataRead
2013-12-16T21:22:10.760Z,1387228930.760 [DataOverHttps](INFO): disconnect
2013-12-16T21:22:11.702Z,1387228931.702 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:22:11.702Z,1387228931.702 [DVL_micro](INFO): Enabling NQ1 output
2013-12-16T21:22:11.702Z,1387228931.702 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD0505 01 1

2013-12-16T21:22:13.709Z,1387228933.709 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:22:13.709Z,1387228933.709 [DVL_micro](INFO): Querying output modes
2013-12-16T21:22:13.709Z,1387228933.709 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD0606

2013-12-16T21:22:15.720Z,1387228935.720 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:22:15.720Z,1387228935.720 [DVL_micro](INFO): Output Modes: No Response
2013-12-16T21:22:15.720Z,1387228935.720 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD2525

2013-12-16T21:22:17.731Z,1387228937.731 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:22:19.735Z,1387228939.735 [DVL_micro](INFO): NQ1 requested
2013-12-16T21:22:19.735Z,1387228939.735 [DVL_micro](INFO): Cycling power to configure device.
2013-12-16T21:22:21.738Z,1387228941.738 [DVL_micro](INFO): Opening uart, block timeout 10ths=20
2013-12-16T21:22:21.738Z,1387228941.738 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD1616 00 0

2013-12-16T21:22:23.744Z,1387228943.744 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:22:23.745Z,1387228943.745 [DVL_micro](INFO): Enabling NQ1 output
2013-12-16T21:22:23.745Z,1387228943.745 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD0505 01 1

2013-12-16T21:22:25.756Z,1387228945.756 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:22:25.756Z,1387228945.756 [DVL_micro](INFO): Querying output modes
2013-12-16T21:22:25.756Z,1387228945.756 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD0606

2013-12-16T21:22:26.288Z,1387228946.288 [DAT](INFO): Init failed - response: 
2013-12-16T21:22:26.289Z,1387228946.289 [DAT](FAULT): DAT failed to initialize
2013-12-16T21:22:26.289Z,1387228946.289 [DAT] Communications Fault, FailCount= 1
2013-12-16T21:22:26.289Z,1387228946.289 [DAT](ERROR): Communications Fault
2013-12-16T21:22:26.313Z,1387228946.313 [CBIT](ERROR): Communications Fault in component: DAT
2013-12-16T21:22:26.416Z,1387228946.416 [DAT](INFO): Powering down
2013-12-16T21:22:27.200Z,1387228947.200 [CBIT](INFO): Clearing failed state for component DAT
2013-12-16T21:22:27.200Z,1387228947.200 [DAT] No Fault, FailCount= 1
2013-12-16T21:22:27.769Z,1387228947.769 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:22:27.769Z,1387228947.769 [DVL_micro](INFO): Output Modes: No Response
2013-12-16T21:22:27.769Z,1387228947.769 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD2525

2013-12-16T21:22:29.581Z,1387228949.581 [DAT](INFO): Powering up
2013-12-16T21:22:29.582Z,1387228949.582 [DAT](DEBUG): Initializing DAT.
2013-12-16T21:22:29.782Z,1387228949.782 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:22:31.794Z,1387228951.794 [DVL_micro](INFO): NQ1 requested
2013-12-16T21:22:31.794Z,1387228951.794 [DVL_micro](INFO): Cycling power to configure device.
2013-12-16T21:22:33.796Z,1387228953.796 [DVL_micro](INFO): Opening uart, block timeout 10ths=20
2013-12-16T21:22:33.797Z,1387228953.797 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD1616 00 0

2013-12-16T21:22:35.807Z,1387228955.807 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:22:35.807Z,1387228955.807 [DVL_micro](INFO): Enabling NQ1 output
2013-12-16T21:22:35.807Z,1387228955.807 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD0505 01 1

2013-12-16T21:22:37.818Z,1387228957.818 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:22:37.818Z,1387228957.818 [DVL_micro](INFO): Querying output modes
2013-12-16T21:22:37.819Z,1387228957.819 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD0606

2013-12-16T21:22:38.759Z,1387228958.759 [DataOverHttps](INFO): tcpConnect
2013-12-16T21:22:39.159Z,1387228959.159 [DataOverHttps](INFO): tcpConnecting
2013-12-16T21:22:39.160Z,1387228959.160 [DataOverHttps](INFO): sslConnect
2013-12-16T21:22:39.161Z,1387228959.161 [DataOverHttps](INFO): sslConnecting
2013-12-16T21:22:39.560Z,1387228959.560 [DataOverHttps](INFO): sslConnecting
2013-12-16T21:22:39.829Z,1387228959.829 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:22:39.830Z,1387228959.830 [DVL_micro](INFO): Output Modes: No Response
2013-12-16T21:22:39.830Z,1387228959.830 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD2525

2013-12-16T21:22:40.110Z,1387228960.110 [DataOverHttps](INFO): sslConnecting
2013-12-16T21:22:40.112Z,1387228960.112 [DataOverHttps](INFO): dataWrite
2013-12-16T21:22:40.112Z,1387228960.112 [DataOverHttps](INFO): dataWriting
2013-12-16T21:22:40.114Z,1387228960.114 [DataOverHttps](INFO): Wrote 206 bytes.
2013-12-16T21:22:40.478Z,1387228960.478 [DataOverHttps](INFO): dataRead
2013-12-16T21:22:40.878Z,1387228960.878 [DataOverHttps](INFO): dataRead
2013-12-16T21:22:40.879Z,1387228960.879 [DataOverHttps](INFO): disconnect
2013-12-16T21:22:41.328Z,1387228961.328 [CBIT](CRITICAL): Environmental Failure. Press:14.982194 PSI. Humidity:11%. Temp:21 C. ABORTING MISSION
2013-12-16T21:22:41.832Z,1387228961.832 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:22:43.844Z,1387228963.844 [DVL_micro](INFO): NQ1 requested
2013-12-16T21:22:43.844Z,1387228963.844 [DVL_micro](INFO): Cycling power to configure device.
2013-12-16T21:22:45.847Z,1387228965.847 [DVL_micro](INFO): Opening uart, block timeout 10ths=20
2013-12-16T21:22:45.847Z,1387228965.847 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD1616 00 0

2013-12-16T21:22:47.858Z,1387228967.858 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:22:47.858Z,1387228967.858 [DVL_micro](INFO): Enabling NQ1 output
2013-12-16T21:22:47.858Z,1387228967.858 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD0505 01 1

2013-12-16T21:22:49.196Z,1387228969.196 [DAT](INFO): Init failed - response: 
2013-12-16T21:22:49.196Z,1387228969.196 [DAT](FAULT): DAT failed to initialize
2013-12-16T21:22:49.196Z,1387228969.196 [DAT] Communications Fault, FailCount= 2
2013-12-16T21:22:49.196Z,1387228969.196 [DAT](ERROR): Communications Fault
2013-12-16T21:22:49.213Z,1387228969.213 [CBIT](ERROR): Communications Fault in component: DAT
2013-12-16T21:22:49.325Z,1387228969.325 [DAT](INFO): Powering down
2013-12-16T21:22:49.869Z,1387228969.869 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:22:49.869Z,1387228969.869 [DVL_micro](INFO): Querying output modes
2013-12-16T21:22:49.869Z,1387228969.869 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD0606

2013-12-16T21:22:50.112Z,1387228970.112 [CBIT](INFO): Clearing failed state for component DAT
2013-12-16T21:22:50.112Z,1387228970.112 [DAT] No Fault, FailCount= 2
2013-12-16T21:22:51.880Z,1387228971.880 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:22:51.880Z,1387228971.880 [DVL_micro](INFO): Output Modes: No Response
2013-12-16T21:22:51.880Z,1387228971.880 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD2525

2013-12-16T21:22:52.500Z,1387228972.500 [DAT](INFO): Powering up
2013-12-16T21:22:52.500Z,1387228972.500 [DAT](DEBUG): Initializing DAT.
2013-12-16T21:22:53.891Z,1387228973.891 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:22:55.895Z,1387228975.895 [DVL_micro](INFO): NQ1 requested
2013-12-16T21:22:55.895Z,1387228975.895 [DVL_micro](INFO): Cycling power to configure device.
2013-12-16T21:22:57.898Z,1387228977.898 [DVL_micro](INFO): Opening uart, block timeout 10ths=20
2013-12-16T21:22:57.898Z,1387228977.898 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD1616 00 0

2013-12-16T21:22:59.905Z,1387228979.905 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:22:59.905Z,1387228979.905 [DVL_micro](INFO): Enabling NQ1 output
2013-12-16T21:22:59.905Z,1387228979.905 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD0505 01 1

2013-12-16T21:23:01.912Z,1387228981.912 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:23:01.912Z,1387228981.912 [DVL_micro](INFO): Querying output modes
2013-12-16T21:23:01.912Z,1387228981.912 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD0606

2013-12-16T21:23:03.919Z,1387228983.919 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:23:03.919Z,1387228983.919 [DVL_micro](INFO): Output Modes: No Response
2013-12-16T21:23:03.919Z,1387228983.919 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD2525

2013-12-16T21:23:05.926Z,1387228985.926 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:23:07.934Z,1387228987.934 [DVL_micro](INFO): NQ1 requested
2013-12-16T21:23:07.934Z,1387228987.934 [DVL_micro](INFO): Cycling power to configure device.
2013-12-16T21:23:08.877Z,1387228988.877 [DataOverHttps](INFO): tcpConnect
2013-12-16T21:23:09.278Z,1387228989.278 [DataOverHttps](INFO): tcpConnecting
2013-12-16T21:23:09.278Z,1387228989.278 [DataOverHttps](INFO): sslConnect
2013-12-16T21:23:09.280Z,1387228989.280 [DataOverHttps](INFO): sslConnecting
2013-12-16T21:23:09.679Z,1387228989.679 [DataOverHttps](INFO): sslConnecting
2013-12-16T21:23:09.936Z,1387228989.936 [DVL_micro](INFO): Opening uart, block timeout 10ths=20
2013-12-16T21:23:09.937Z,1387228989.937 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD1616 00 0

2013-12-16T21:23:10.214Z,1387228990.214 [DataOverHttps](INFO): sslConnecting
2013-12-16T21:23:10.216Z,1387228990.216 [DataOverHttps](INFO): dataWrite
2013-12-16T21:23:10.216Z,1387228990.216 [DataOverHttps](INFO): dataWriting
2013-12-16T21:23:10.218Z,1387228990.218 [DataOverHttps](INFO): Wrote 206 bytes.
2013-12-16T21:23:10.616Z,1387228990.616 [DataOverHttps](INFO): dataRead
2013-12-16T21:23:11.017Z,1387228991.017 [DataOverHttps](INFO): dataRead
2013-12-16T21:23:11.018Z,1387228991.018 [DataOverHttps](INFO): disconnect
2013-12-16T21:23:11.939Z,1387228991.939 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:23:11.939Z,1387228991.939 [DVL_micro](INFO): Enabling NQ1 output
2013-12-16T21:23:11.939Z,1387228991.939 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD0505 01 1

2013-12-16T21:23:12.131Z,1387228992.131 [DAT](INFO): Init failed - response: 
2013-12-16T21:23:12.132Z,1387228992.132 [DAT](FAULT): DAT failed to initialize
2013-12-16T21:23:12.132Z,1387228992.132 [DAT] Communications Fault, FailCount= 3
2013-12-16T21:23:12.132Z,1387228992.132 [DAT](ERROR): Communications Fault
2013-12-16T21:23:12.149Z,1387228992.149 [CBIT](ERROR): Communications Fault in component: DAT
2013-12-16T21:23:12.150Z,1387228992.150 [CBIT](CRITICAL): Communications Fault in component: DAT
2013-12-16T21:23:12.227Z,1387228992.227 [DAT](INFO): Powering down
2013-12-16T21:23:13.946Z,1387228993.946 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:23:13.946Z,1387228993.946 [DVL_micro](INFO): Querying output modes
2013-12-16T21:23:13.947Z,1387228993.947 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD0606

2013-12-16T21:23:15.953Z,1387228995.953 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:23:15.953Z,1387228995.953 [DVL_micro](INFO): Output Modes: No Response
2013-12-16T21:23:15.954Z,1387228995.954 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD2525

2013-12-16T21:23:17.956Z,1387228997.956 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:23:19.964Z,1387228999.964 [DVL_micro](INFO): NQ1 requested
2013-12-16T21:23:19.964Z,1387228999.964 [DVL_micro](INFO): Cycling power to configure device.
2013-12-16T21:23:21.967Z,1387229001.967 [DVL_micro](INFO): Opening uart, block timeout 10ths=20
2013-12-16T21:23:21.967Z,1387229001.967 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD1616 00 0

2013-12-16T21:23:23.978Z,1387229003.978 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:23:23.978Z,1387229003.978 [DVL_micro](INFO): Enabling NQ1 output
2013-12-16T21:23:23.978Z,1387229003.978 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD0505 01 1

2013-12-16T21:23:25.981Z,1387229005.981 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:23:25.981Z,1387229005.981 [DVL_micro](INFO): Querying output modes
2013-12-16T21:23:25.981Z,1387229005.981 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD0606

2013-12-16T21:23:27.984Z,1387229007.984 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:23:27.984Z,1387229007.984 [DVL_micro](INFO): Output Modes: No Response
2013-12-16T21:23:27.984Z,1387229007.984 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD2525

2013-12-16T21:23:29.995Z,1387229009.995 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:23:32.003Z,1387229012.003 [DVL_micro](INFO): NQ1 requested
2013-12-16T21:23:32.003Z,1387229012.003 [DVL_micro](INFO): Cycling power to configure device.
2013-12-16T21:23:34.006Z,1387229014.006 [DVL_micro](INFO): Opening uart, block timeout 10ths=20
2013-12-16T21:23:34.006Z,1387229014.006 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD1616 00 0

2013-12-16T21:23:36.012Z,1387229016.012 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:23:36.013Z,1387229016.013 [DVL_micro](INFO): Enabling NQ1 output
2013-12-16T21:23:36.013Z,1387229016.013 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD0505 01 1

2013-12-16T21:23:37.436Z,1387229017.436 [Default:CallIridium] Running Loop=1
2013-12-16T21:23:37.436Z,1387229017.436 [Default:CallIridium](INFO): Aggregate::initialize Default:CallIridium
2013-12-16T21:23:37.436Z,1387229017.436 [Default:CallIridium:A] Running Loop=1
2013-12-16T21:23:37.438Z,1387229017.438 [Default:CallIridium:A] Stopped
2013-12-16T21:23:37.438Z,1387229017.438 [Default:CallIridium:B] Running Loop=1
2013-12-16T21:23:37.438Z,1387229017.438 [Default:CallIridium:B](INFO): Aggregate::initialize Default:CallIridium:B
2013-12-16T21:23:37.448Z,1387229017.448 [CBIT](INFO): Clearing failed count for component NAL9602
2013-12-16T21:23:37.448Z,1387229017.448 [NAL9602] No Fault, FailCount= 2
2013-12-16T21:23:37.817Z,1387229017.817 [NAL9602](INFO): Powering up NAL9602
2013-12-16T21:23:37.832Z,1387229017.832 [Default:Iridium] Running Loop=1
2013-12-16T21:23:37.832Z,1387229017.832 [Default:Iridium](INFO): Aggregate::initialize Default:Iridium
2013-12-16T21:23:37.832Z,1387229017.832 [Default:Iridium:A.SetSpeed] Running Loop=1
2013-12-16T21:23:37.832Z,1387229017.832 [Default:Iridium:A.SetSpeed](DEBUG): Initialize.
2013-12-16T21:23:37.832Z,1387229017.832 [Default:Iridium:B.GoToSurface] Running Loop=1
2013-12-16T21:23:37.832Z,1387229017.832 [Default:Iridium:B.GoToSurface](DEBUG): Initialize GoToSurfaceComponent.
2013-12-16T21:23:37.833Z,1387229017.833 [Default:Iridium:B.GoToSurface] Stopped
2013-12-16T21:23:37.833Z,1387229017.833 [Default:Iridium:B.GoToSurface](DEBUG): Uninitialize GoToSurfaceComponent.
2013-12-16T21:23:37.833Z,1387229017.833 [Default:Iridium:Read_Iridium] Running Loop=1
2013-12-16T21:23:38.020Z,1387229018.020 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:23:38.020Z,1387229018.020 [DVL_micro](INFO): Querying output modes
2013-12-16T21:23:38.020Z,1387229018.020 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD0606

2013-12-16T21:23:38.918Z,1387229018.918 [DataOverHttps](INFO): tcpConnect
2013-12-16T21:23:39.049Z,1387229019.049 [DataOverHttps](INFO): tcpConnecting
2013-12-16T21:23:39.050Z,1387229019.050 [DataOverHttps](INFO): sslConnect
2013-12-16T21:23:39.051Z,1387229019.051 [DataOverHttps](INFO): sslConnecting
2013-12-16T21:23:39.449Z,1387229019.449 [DataOverHttps](INFO): sslConnecting
2013-12-16T21:23:39.963Z,1387229019.963 [DataOverHttps](INFO): sslConnecting
2013-12-16T21:23:39.965Z,1387229019.965 [DataOverHttps](INFO): dataWrite
2013-12-16T21:23:39.980Z,1387229019.980 [DataOverHttps](INFO): encoded 598 bytes: %5d%00%00%04%00%c7%01%00%00%00%00%00%00%00%15%1d%80%03%0cVb%02T%99%fb%f8O%a5F%0a%93B%3b%de%a5%00%d7%db%87%aa%fd%1d%feK%7f%2c%7b%c9Ei%9d%ee%87N%11%d1-B%cb%a9%de%3aX%f8u%98%cc%2a%9a%84qZcsKs%7d%84%60%db%02V%ce98%c6%b1%b7p%a0%83xW%1a-%96%12%f5l%a7%07O%7d%87%0dR%bd%c5_%ae8%f1%ea%9b%fc%a1%c4%c1%2f%fa%8f%cc%fe%ccT%9b%ad%f83%ab%0d%93%ba%c66%83%609u%11%ab%24%d3t%27%eb%d7%b8Vc%0f%2bv%94x%1d%a5%d5%14%b2%ffi%0d0%15%afm%cd%0d%f0%3d%ac%0bv%1f%04%bc%96%d0%e4%bd%c4%c0L%3e%8cG%e9%7c%ad%0a%97%f0%b4%d1%ea%0d%94%27%b4%7dt%21%8cp%1b%00%e4%da%e9+%f8%ff%91%17%84%40%ad%fb%0a%c5%a9%81%7b%d7%f5P%e1bM%ef%5d%d6.%84%00
2013-12-16T21:23:39.982Z,1387229019.982 [DataOverHttps](INFO): Sending 236 bytes from file Logs/20131216T211549/Courier0008.lzma
2013-12-16T21:23:39.983Z,1387229019.983 [DataOverHttps](INFO): dataWriting
2013-12-16T21:23:39.985Z,1387229019.985 [DataOverHttps](INFO): Wrote 871 bytes.
2013-12-16T21:23:40.031Z,1387229020.031 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:23:40.031Z,1387229020.031 [DVL_micro](INFO): Output Modes: No Response
2013-12-16T21:23:40.031Z,1387229020.031 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD2525

2013-12-16T21:23:40.367Z,1387229020.367 [DataOverHttps](INFO): dataRead
2013-12-16T21:23:40.763Z,1387229020.763 [DataOverHttps](INFO): dataRead
2013-12-16T21:23:40.765Z,1387229020.765 [DataOverHttps](INFO): Moved sent file to Logs/20131216T211549/Courier0008.lzma.bak
2013-12-16T21:23:40.765Z,1387229020.765 [DataOverHttps](INFO): SBD MOMSN=271422
2013-12-16T21:23:40.765Z,1387229020.765 [DataOverHttps](INFO): disconnect
2013-12-16T21:23:41.691Z,1387229021.691 [DataOverHttps](INFO): tcpConnect
2013-12-16T21:23:41.731Z,1387229021.731 [DataOverHttps](INFO): tcpConnecting
2013-12-16T21:23:41.731Z,1387229021.731 [DataOverHttps](INFO): sslConnect
2013-12-16T21:23:41.732Z,1387229021.732 [DataOverHttps](INFO): sslConnecting
2013-12-16T21:23:42.042Z,1387229022.042 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:23:42.134Z,1387229022.134 [DataOverHttps](INFO): sslConnecting
2013-12-16T21:23:42.644Z,1387229022.644 [DataOverHttps](INFO): sslConnecting
2013-12-16T21:23:42.646Z,1387229022.646 [DataOverHttps](INFO): dataWrite
2013-12-16T21:23:42.648Z,1387229022.648 [DataOverHttps](INFO): encoded 1107 bytes: %5d%00%00%04%00%03%04%00%00%00%00%00%00%00%15%1d%80%03%0cVb%02%a9%bb1%e1%3f%83%2f%fbm%dd%ab%ee%18%b6%11%d5%9c%c3%21%15%fa%b0%7f%a28%e9%a3%d2%f74%a6%8b%9a%f7%d5%b3+%f6%09x%17%f99%07%0e%c9b%01%9a%af%bb%9e%e3%8f%b2%e1FX%0eMr%e3%02%16%7d%d7%11%92%da%27%d3%10%17%c2%abd%87%1b%18%b3%aaT%f9%e32%1f%fc%10%2a%02%27%8b%5c%1f%fa%95%a5%fdMgX%e7l%a6%c8%1c%a2%b3%24FUN%06%ecQ%cb%28w%a0%c6%f5%0f%d7tdp%8cN%03%91%01%dc%1b%ce%08%8a%88%29q%e73i%96%c2%d9aJ%40%3e%ca%c1RuA%c9%889%08+%cc%e9%0e%60%c1%f1%c0z%98c%0d%22%c55Z%b9%c3%0a%a0n%d6%a1%9c%0c%13_%f7%da%e4%5b%1e2%04%7c%29%18+%adK%90%60%26%e8%eb%c5%f2%86%93sP%3c%9c%a0eSu%3f%1c%efc%3a%24%d8%f6%fcK%de%f6%22%b0C%c2%8f%83%40%07%8c%219%bb%b2%3d%ab%3f%23%11%d8%5dA%fc%96%0d%fb3%fe%d4%f9l%8e%f38%9e%a3H%0e%f7N%00%22%8aO%ac7+W%02%18%a0%c9I%1dTq%a3%db%bd%cf%89%b6Dyg%d7%2c%10%bd%bb%b2%cek%e6%c8%2c%deH%87%d5%f4v%bc%bc%1dgC%e6%1d6J%04%af%a2%93G%d5%8b%e3%2a%fb%c4%a0%e0%eb%afub5%de-%86%fe%1d%93%dfS%26+%de%e9%81L%03%9c%d8%f5%0e%84%d3p%25%f0%04%94H%00%dd%7d%85%a5%f4%83%1f%93%83%26%d0%25%e0Z%cfk%dft%a6%082%deG%a1%22%ad%c6q%25%e7%de%af%2c%e4g%d2%11%5b%c9%1ab%fac%19%ee%91%8a%02%60%ec89
2013-12-16T21:23:42.649Z,1387229022.649 [DataOverHttps](INFO): Sending 437 bytes from file Logs/20131216T211549/Express0009.lzma
2013-12-16T21:23:42.649Z,1387229022.649 [DataOverHttps](INFO): dataWriting
2013-12-16T21:23:42.652Z,1387229022.652 [DataOverHttps](INFO): Wrote 1381 bytes.
2013-12-16T21:23:43.047Z,1387229023.047 [DataOverHttps](INFO): dataRead
2013-12-16T21:23:43.447Z,1387229023.447 [DataOverHttps](INFO): dataRead
2013-12-16T21:23:43.449Z,1387229023.449 [DataOverHttps](INFO): Moved sent file to Logs/20131216T211549/Express0009.lzma.bak
2013-12-16T21:23:43.449Z,1387229023.449 [DataOverHttps](INFO): SBD MOMSN=271431
2013-12-16T21:23:43.449Z,1387229023.449 [DataOverHttps](INFO): disconnect
2013-12-16T21:23:44.054Z,1387229024.054 [DVL_micro](INFO): NQ1 requested
2013-12-16T21:23:44.054Z,1387229024.054 [DVL_micro](INFO): Cycling power to configure device.
2013-12-16T21:23:44.383Z,1387229024.383 [DataOverHttps](INFO): tcpConnect
2013-12-16T21:23:46.056Z,1387229026.056 [DVL_micro](INFO): Opening uart, block timeout 10ths=20
2013-12-16T21:23:46.057Z,1387229026.057 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD1616 00 0

2013-12-16T21:23:47.992Z,1387229027.992 [Default:Iridium:Read_Iridium] Stopped
2013-12-16T21:23:47.993Z,1387229027.993 [Default:Iridium](INFO): Completed Default:Iridium
2013-12-16T21:23:47.993Z,1387229027.993 [Default:Iridium] Stopped
2013-12-16T21:23:47.993Z,1387229027.993 [Default:Iridium](INFO): Aggregate::uninitialize Default:Iridium
2013-12-16T21:23:47.993Z,1387229027.993 [Default:Iridium:A.SetSpeed] Stopped
2013-12-16T21:23:47.993Z,1387229027.993 [Default:Iridium:A.SetSpeed](DEBUG): Uninitialize.
2013-12-16T21:23:48.059Z,1387229028.059 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:23:48.059Z,1387229028.059 [DVL_micro](INFO): Enabling NQ1 output
2013-12-16T21:23:48.060Z,1387229028.060 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD0505 01 1

2013-12-16T21:23:48.108Z,1387229028.108 [DataOverHttps](INFO): tcpConnecting
2013-12-16T21:23:48.109Z,1387229028.109 [DataOverHttps](INFO): sslConnect
2013-12-16T21:23:48.110Z,1387229028.110 [DataOverHttps](INFO): sslConnecting
2013-12-16T21:23:48.134Z,1387229028.134 [Default:CallIridium:B](INFO): Completed Default:CallIridium:B
2013-12-16T21:23:48.134Z,1387229028.134 [Default:CallIridium:B] Stopped
2013-12-16T21:23:48.134Z,1387229028.134 [Default:CallIridium:B](INFO): Aggregate::uninitialize Default:CallIridium:B
2013-12-16T21:23:48.134Z,1387229028.134 [Default:CallIridium](INFO): Completed Default:CallIridium
2013-12-16T21:23:48.134Z,1387229028.134 [Default:CallIridium] Stopped
2013-12-16T21:23:48.134Z,1387229028.134 [Default:CallIridium](INFO): Aggregate::uninitialize Default:CallIridium
2013-12-16T21:23:48.417Z,1387229028.417 [DataOverHttps](INFO): sslConnecting
2013-12-16T21:23:50.066Z,1387229030.066 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:23:50.066Z,1387229030.066 [DVL_micro](INFO): Querying output modes
2013-12-16T21:23:50.067Z,1387229030.067 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD0606

2013-12-16T21:23:50.904Z,1387229030.904 [NAL9602](ERROR): NAL9602 initialize uart error: serial timeout
2013-12-16T21:23:50.904Z,1387229030.904 [NAL9602] Communications Fault, FailCount= 1
2013-12-16T21:23:50.904Z,1387229030.904 [NAL9602](ERROR): Communications Fault
2013-12-16T21:23:50.932Z,1387229030.932 [CBIT](ERROR): Communications Fault in component: NAL9602
2013-12-16T21:23:51.003Z,1387229031.003 [DataOverHttps](INFO): sslConnecting
2013-12-16T21:23:51.009Z,1387229031.009 [DataOverHttps](INFO): dataWrite
2013-12-16T21:23:51.010Z,1387229031.010 [DataOverHttps](INFO): dataWriting
2013-12-16T21:23:51.011Z,1387229031.011 [DataOverHttps](INFO): Wrote 206 bytes.
2013-12-16T21:23:51.017Z,1387229031.017 [NAL9602](INFO): Powering down
2013-12-16T21:23:51.348Z,1387229031.348 [DataOverHttps](INFO): dataRead
2013-12-16T21:23:51.751Z,1387229031.751 [DataOverHttps](INFO): dataRead
2013-12-16T21:23:51.752Z,1387229031.752 [DataOverHttps](INFO): disconnect
2013-12-16T21:23:51.799Z,1387229031.799 [CBIT](INFO): Clearing failed state for component NAL9602
2013-12-16T21:23:51.799Z,1387229031.799 [NAL9602] No Fault, FailCount= 1
2013-12-16T21:23:52.077Z,1387229032.077 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:23:52.078Z,1387229032.078 [DVL_micro](INFO): Output Modes: No Response
2013-12-16T21:23:52.078Z,1387229032.078 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD2525

2013-12-16T21:23:54.080Z,1387229034.080 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:23:56.088Z,1387229036.088 [DVL_micro](INFO): NQ1 requested
2013-12-16T21:23:56.088Z,1387229036.088 [DVL_micro](INFO): Cycling power to configure device.
2013-12-16T21:23:56.149Z,1387229036.149 [NAL9602](INFO): Powering up NAL9602
2013-12-16T21:23:58.091Z,1387229038.091 [DVL_micro](INFO): Opening uart, block timeout 10ths=20
2013-12-16T21:23:58.091Z,1387229038.091 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD1616 00 0

2013-12-16T21:24:00.102Z,1387229040.102 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:24:00.102Z,1387229040.102 [DVL_micro](INFO): Enabling NQ1 output
2013-12-16T21:24:00.102Z,1387229040.102 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD0505 01 1

2013-12-16T21:24:02.113Z,1387229042.113 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:24:02.113Z,1387229042.113 [DVL_micro](INFO): Querying output modes
2013-12-16T21:24:02.113Z,1387229042.113 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD0606

2013-12-16T21:24:04.116Z,1387229044.116 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:24:04.116Z,1387229044.116 [DVL_micro](INFO): Output Modes: No Response
2013-12-16T21:24:04.116Z,1387229044.116 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD2525

2013-12-16T21:24:06.123Z,1387229046.123 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:24:08.127Z,1387229048.127 [DVL_micro](INFO): NQ1 requested
2013-12-16T21:24:08.127Z,1387229048.127 [DVL_micro](INFO): Cycling power to configure device.
2013-12-16T21:24:08.980Z,1387229048.980 [NAL9602](ERROR): NAL9602 initialize uart error: serial timeout
2013-12-16T21:24:08.980Z,1387229048.980 [NAL9602] Communications Fault, FailCount= 2
2013-12-16T21:24:08.980Z,1387229048.980 [NAL9602](ERROR): Communications Fault
2013-12-16T21:24:09.007Z,1387229049.007 [CBIT](ERROR): Communications Fault in component: NAL9602
2013-12-16T21:24:09.008Z,1387229049.008 [CBIT](CRITICAL): Communications Fault in component: NAL9602
2013-12-16T21:24:09.082Z,1387229049.082 [NAL9602](INFO): Powering down
2013-12-16T21:24:10.130Z,1387229050.130 [DVL_micro](INFO): Opening uart, block timeout 10ths=20
2013-12-16T21:24:10.130Z,1387229050.130 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD1616 00 0

2013-12-16T21:24:12.141Z,1387229052.141 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:24:12.141Z,1387229052.141 [DVL_micro](INFO): Enabling NQ1 output
2013-12-16T21:24:12.141Z,1387229052.141 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD0505 01 1

2013-12-16T21:24:14.152Z,1387229054.152 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:24:14.152Z,1387229054.152 [DVL_micro](INFO): Querying output modes
2013-12-16T21:24:14.152Z,1387229054.152 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD0606

2013-12-16T21:24:14.624Z,1387229054.624 [DataOverHttps](INFO): tcpConnect
2013-12-16T21:24:15.024Z,1387229055.024 [DataOverHttps](INFO): tcpConnecting
2013-12-16T21:24:15.024Z,1387229055.024 [DataOverHttps](INFO): sslConnect
2013-12-16T21:24:15.026Z,1387229055.026 [DataOverHttps](INFO): sslConnecting
2013-12-16T21:24:15.425Z,1387229055.425 [DataOverHttps](INFO): sslConnecting
2013-12-16T21:24:15.935Z,1387229055.935 [DataOverHttps](INFO): sslConnecting
2013-12-16T21:24:15.937Z,1387229055.937 [DataOverHttps](INFO): dataWrite
2013-12-16T21:24:15.937Z,1387229055.937 [DataOverHttps](INFO): dataWriting
2013-12-16T21:24:15.938Z,1387229055.938 [DataOverHttps](INFO): Wrote 206 bytes.
2013-12-16T21:24:16.155Z,1387229056.155 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:24:16.155Z,1387229056.155 [DVL_micro](INFO): Output Modes: No Response
2013-12-16T21:24:16.155Z,1387229056.155 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD2525

2013-12-16T21:24:16.340Z,1387229056.340 [DataOverHttps](INFO): dataRead
2013-12-16T21:24:16.736Z,1387229056.736 [DataOverHttps](INFO): dataRead
2013-12-16T21:24:16.736Z,1387229056.736 [DataOverHttps](INFO): disconnect
2013-12-16T21:24:18.168Z,1387229058.168 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:24:20.170Z,1387229060.170 [DVL_micro](INFO): NQ1 requested
2013-12-16T21:24:20.170Z,1387229060.170 [DVL_micro](INFO): Cycling power to configure device.
2013-12-16T21:24:22.172Z,1387229062.172 [DVL_micro](INFO): Opening uart, block timeout 10ths=20
2013-12-16T21:24:22.173Z,1387229062.173 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD1616 00 0

2013-12-16T21:24:24.183Z,1387229064.183 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:24:24.183Z,1387229064.183 [DVL_micro](INFO): Enabling NQ1 output
2013-12-16T21:24:24.183Z,1387229064.183 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD0505 01 1

2013-12-16T21:24:26.190Z,1387229066.190 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:24:26.190Z,1387229066.190 [DVL_micro](INFO): Querying output modes
2013-12-16T21:24:26.191Z,1387229066.191 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD0606

2013-12-16T21:24:28.201Z,1387229068.201 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:24:28.201Z,1387229068.201 [DVL_micro](INFO): Output Modes: No Response
2013-12-16T21:24:28.202Z,1387229068.202 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD2525

2013-12-16T21:24:30.212Z,1387229070.212 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:24:32.220Z,1387229072.220 [DVL_micro](INFO): NQ1 requested
2013-12-16T21:24:32.220Z,1387229072.220 [DVL_micro](INFO): Cycling power to configure device.
2013-12-16T21:24:34.223Z,1387229074.223 [DVL_micro](INFO): Opening uart, block timeout 10ths=20
2013-12-16T21:24:34.223Z,1387229074.223 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD1616 00 0

2013-12-16T21:24:36.226Z,1387229076.226 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:24:36.226Z,1387229076.226 [DVL_micro](INFO): Enabling NQ1 output
2013-12-16T21:24:36.226Z,1387229076.226 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD0505 01 1

2013-12-16T21:24:38.229Z,1387229078.229 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:24:38.229Z,1387229078.229 [DVL_micro](INFO): Querying output modes
2013-12-16T21:24:38.229Z,1387229078.229 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD0606

2013-12-16T21:24:40.240Z,1387229080.240 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:24:40.240Z,1387229080.240 [DVL_micro](INFO): Output Modes: No Response
2013-12-16T21:24:40.240Z,1387229080.240 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD2525

2013-12-16T21:24:42.251Z,1387229082.251 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:24:44.259Z,1387229084.259 [DVL_micro](INFO): NQ1 requested
2013-12-16T21:24:44.259Z,1387229084.259 [DVL_micro](INFO): Cycling power to configure device.
2013-12-16T21:24:44.739Z,1387229084.739 [DataOverHttps](INFO): tcpConnect
2013-12-16T21:24:45.135Z,1387229085.135 [DataOverHttps](INFO): tcpConnecting
2013-12-16T21:24:45.135Z,1387229085.135 [DataOverHttps](INFO): sslConnect
2013-12-16T21:24:45.137Z,1387229085.137 [DataOverHttps](INFO): sslConnecting
2013-12-16T21:24:45.536Z,1387229085.536 [DataOverHttps](INFO): sslConnecting
2013-12-16T21:24:46.037Z,1387229086.037 [DataOverHttps](INFO): sslConnecting
2013-12-16T21:24:46.039Z,1387229086.039 [DataOverHttps](INFO): dataWrite
2013-12-16T21:24:46.039Z,1387229086.039 [DataOverHttps](INFO): dataWriting
2013-12-16T21:24:46.040Z,1387229086.040 [DataOverHttps](INFO): Wrote 206 bytes.
2013-12-16T21:24:46.262Z,1387229086.262 [DVL_micro](INFO): Opening uart, block timeout 10ths=20
2013-12-16T21:24:46.262Z,1387229086.262 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD1616 00 0

2013-12-16T21:24:46.441Z,1387229086.441 [DataOverHttps](INFO): dataRead
2013-12-16T21:24:46.838Z,1387229086.838 [DataOverHttps](INFO): dataRead
2013-12-16T21:24:46.838Z,1387229086.838 [DataOverHttps](INFO): disconnect
2013-12-16T21:24:48.264Z,1387229088.264 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:24:48.265Z,1387229088.265 [DVL_micro](INFO): Enabling NQ1 output
2013-12-16T21:24:48.265Z,1387229088.265 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD0505 01 1

2013-12-16T21:24:50.272Z,1387229090.272 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:24:50.272Z,1387229090.272 [DVL_micro](INFO): Querying output modes
2013-12-16T21:24:50.272Z,1387229090.272 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD0606

2013-12-16T21:24:52.283Z,1387229092.283 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:24:52.283Z,1387229092.283 [DVL_micro](INFO): Output Modes: No Response
2013-12-16T21:24:52.283Z,1387229092.283 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD2525

2013-12-16T21:24:54.286Z,1387229094.286 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:24:56.290Z,1387229096.290 [DVL_micro](INFO): NQ1 requested
2013-12-16T21:24:56.290Z,1387229096.290 [DVL_micro](INFO): Cycling power to configure device.
2013-12-16T21:24:58.292Z,1387229098.292 [DVL_micro](INFO): Opening uart, block timeout 10ths=20
2013-12-16T21:24:58.293Z,1387229098.293 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD1616 00 0

2013-12-16T21:25:00.295Z,1387229100.295 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:25:00.295Z,1387229100.295 [DVL_micro](INFO): Enabling NQ1 output
2013-12-16T21:25:00.295Z,1387229100.295 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD0505 01 1

2013-12-16T21:25:02.302Z,1387229102.302 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:25:02.302Z,1387229102.302 [DVL_micro](INFO): Querying output modes
2013-12-16T21:25:02.303Z,1387229102.303 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD0606

2013-12-16T21:25:04.313Z,1387229104.313 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:25:04.313Z,1387229104.313 [DVL_micro](INFO): Output Modes: No Response
2013-12-16T21:25:04.314Z,1387229104.314 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD2525

2013-12-16T21:25:06.324Z,1387229106.324 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:25:08.332Z,1387229108.332 [DVL_micro](INFO): NQ1 requested
2013-12-16T21:25:08.332Z,1387229108.332 [DVL_micro](INFO): Cycling power to configure device.
2013-12-16T21:25:10.335Z,1387229110.335 [DVL_micro](INFO): Opening uart, block timeout 10ths=20
2013-12-16T21:25:10.336Z,1387229110.336 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD1616 00 0

2013-12-16T21:25:12.342Z,1387229112.342 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:25:12.342Z,1387229112.342 [DVL_micro](INFO): Enabling NQ1 output
2013-12-16T21:25:12.342Z,1387229112.342 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD0505 01 1

2013-12-16T21:25:14.353Z,1387229114.353 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:25:14.353Z,1387229114.353 [DVL_micro](INFO): Querying output modes
2013-12-16T21:25:14.353Z,1387229114.353 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD0606

2013-12-16T21:25:14.842Z,1387229114.842 [DataOverHttps](INFO): tcpConnect
2013-12-16T21:25:15.238Z,1387229115.238 [DataOverHttps](INFO): tcpConnecting
2013-12-16T21:25:15.238Z,1387229115.238 [DataOverHttps](INFO): sslConnect
2013-12-16T21:25:15.240Z,1387229115.240 [DataOverHttps](INFO): sslConnecting
2013-12-16T21:25:15.638Z,1387229115.638 [DataOverHttps](INFO): sslConnecting
2013-12-16T21:25:16.153Z,1387229116.153 [DataOverHttps](INFO): sslConnecting
2013-12-16T21:25:16.155Z,1387229116.155 [DataOverHttps](INFO): dataWrite
2013-12-16T21:25:16.155Z,1387229116.155 [DataOverHttps](INFO): dataWriting
2013-12-16T21:25:16.156Z,1387229116.156 [DataOverHttps](INFO): Wrote 206 bytes.
2013-12-16T21:25:16.356Z,1387229116.356 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:25:16.356Z,1387229116.356 [DVL_micro](INFO): Output Modes: No Response
2013-12-16T21:25:16.356Z,1387229116.356 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD2525

2013-12-16T21:25:16.556Z,1387229116.556 [DataOverHttps](INFO): dataRead
2013-12-16T21:25:16.956Z,1387229116.956 [DataOverHttps](INFO): dataRead
2013-12-16T21:25:16.957Z,1387229116.957 [DataOverHttps](INFO): disconnect
2013-12-16T21:25:18.368Z,1387229118.368 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:25:20.371Z,1387229120.371 [DVL_micro](INFO): NQ1 requested
2013-12-16T21:25:20.371Z,1387229120.371 [DVL_micro](INFO): Cycling power to configure device.
2013-12-16T21:25:22.374Z,1387229122.374 [DVL_micro](INFO): Opening uart, block timeout 10ths=20
2013-12-16T21:25:22.374Z,1387229122.374 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD1616 00 0

2013-12-16T21:25:24.377Z,1387229124.377 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:25:24.377Z,1387229124.377 [DVL_micro](INFO): Enabling NQ1 output
2013-12-16T21:25:24.377Z,1387229124.377 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD0505 01 1

2013-12-16T21:25:26.384Z,1387229126.384 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:25:26.384Z,1387229126.384 [DVL_micro](INFO): Querying output modes
2013-12-16T21:25:26.384Z,1387229126.384 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD0606

2013-12-16T21:25:28.391Z,1387229128.391 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:25:28.391Z,1387229128.391 [DVL_micro](INFO): Output Modes: No Response
2013-12-16T21:25:28.391Z,1387229128.391 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD2525

2013-12-16T21:25:30.394Z,1387229130.394 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:25:32.402Z,1387229132.402 [DVL_micro](INFO): NQ1 requested
2013-12-16T21:25:32.402Z,1387229132.402 [DVL_micro](INFO): Cycling power to configure device.
2013-12-16T21:25:34.404Z,1387229134.404 [DVL_micro](INFO): Opening uart, block timeout 10ths=20
2013-12-16T21:25:34.405Z,1387229134.405 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD1616 00 0

2013-12-16T21:25:36.410Z,1387229136.410 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:25:36.410Z,1387229136.410 [DVL_micro](INFO): Enabling NQ1 output
2013-12-16T21:25:36.410Z,1387229136.410 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD0505 01 1

2013-12-16T21:25:38.422Z,1387229138.422 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:25:38.422Z,1387229138.422 [DVL_micro](INFO): Querying output modes
2013-12-16T21:25:38.423Z,1387229138.423 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD0606

2013-12-16T21:25:40.425Z,1387229140.425 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:25:40.425Z,1387229140.425 [DVL_micro](INFO): Output Modes: No Response
2013-12-16T21:25:40.426Z,1387229140.426 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD2525

2013-12-16T21:25:42.436Z,1387229142.436 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:25:44.440Z,1387229144.440 [DVL_micro](INFO): NQ1 requested
2013-12-16T21:25:44.440Z,1387229144.440 [DVL_micro](INFO): Cycling power to configure device.
2013-12-16T21:25:44.956Z,1387229144.956 [DataOverHttps](INFO): tcpConnect
2013-12-16T21:25:45.356Z,1387229145.356 [DataOverHttps](INFO): tcpConnecting
2013-12-16T21:25:45.357Z,1387229145.357 [DataOverHttps](INFO): sslConnect
2013-12-16T21:25:45.358Z,1387229145.358 [DataOverHttps](INFO): sslConnecting
2013-12-16T21:25:45.753Z,1387229145.753 [DataOverHttps](INFO): sslConnecting
2013-12-16T21:25:46.257Z,1387229146.257 [DataOverHttps](INFO): sslConnecting
2013-12-16T21:25:46.259Z,1387229146.259 [DataOverHttps](INFO): dataWrite
2013-12-16T21:25:46.259Z,1387229146.259 [DataOverHttps](INFO): dataWriting
2013-12-16T21:25:46.261Z,1387229146.261 [DataOverHttps](INFO): Wrote 206 bytes.
2013-12-16T21:25:46.443Z,1387229146.443 [DVL_micro](INFO): Opening uart, block timeout 10ths=20
2013-12-16T21:25:46.443Z,1387229146.443 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD1616 00 0

2013-12-16T21:25:46.658Z,1387229146.658 [DataOverHttps](INFO): dataRead
2013-12-16T21:25:47.059Z,1387229147.059 [DataOverHttps](INFO): dataRead
2013-12-16T21:25:47.060Z,1387229147.060 [DataOverHttps](INFO): disconnect
2013-12-16T21:25:48.454Z,1387229148.454 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:25:48.454Z,1387229148.454 [DVL_micro](INFO): Enabling NQ1 output
2013-12-16T21:25:48.454Z,1387229148.454 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD0505 01 1

2013-12-16T21:25:50.467Z,1387229150.467 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:25:50.467Z,1387229150.467 [DVL_micro](INFO): Querying output modes
2013-12-16T21:25:50.468Z,1387229150.468 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD0606

2013-12-16T21:25:52.469Z,1387229152.469 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:25:52.469Z,1387229152.469 [DVL_micro](INFO): Output Modes: No Response
2013-12-16T21:25:52.471Z,1387229152.471 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD2525

2013-12-16T21:25:54.471Z,1387229154.471 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:25:56.475Z,1387229156.475 [DVL_micro](INFO): NQ1 requested
2013-12-16T21:25:56.475Z,1387229156.475 [DVL_micro](INFO): Cycling power to configure device.
2013-12-16T21:25:58.478Z,1387229158.478 [DVL_micro](INFO): Opening uart, block timeout 10ths=20
2013-12-16T21:25:58.478Z,1387229158.478 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD1616 00 0

2013-12-16T21:26:00.480Z,1387229160.480 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:26:00.481Z,1387229160.481 [DVL_micro](INFO): Enabling NQ1 output
2013-12-16T21:26:00.481Z,1387229160.481 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD0505 01 1

2013-12-16T21:26:02.484Z,1387229162.484 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:26:02.484Z,1387229162.484 [DVL_micro](INFO): Querying output modes
2013-12-16T21:26:02.484Z,1387229162.484 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD0606

2013-12-16T21:26:04.495Z,1387229164.495 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:26:04.495Z,1387229164.495 [DVL_micro](INFO): Output Modes: No Response
2013-12-16T21:26:04.495Z,1387229164.495 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD2525

2013-12-16T21:26:06.506Z,1387229166.506 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:26:08.518Z,1387229168.518 [DVL_micro](INFO): NQ1 requested
2013-12-16T21:26:08.518Z,1387229168.518 [DVL_micro](INFO): Cycling power to configure device.
2013-12-16T21:26:09.099Z,1387229169.099 [CBIT](INFO): Clearing failed count for component NAL9602
2013-12-16T21:26:09.099Z,1387229169.099 [NAL9602] No Fault, FailCount= 2
2013-12-16T21:26:09.464Z,1387229169.464 [NAL9602](INFO): Powering up NAL9602
2013-12-16T21:26:10.520Z,1387229170.520 [DVL_micro](INFO): Opening uart, block timeout 10ths=20
2013-12-16T21:26:10.521Z,1387229170.521 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD1616 00 0

2013-12-16T21:26:12.531Z,1387229172.531 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:26:12.531Z,1387229172.531 [DVL_micro](INFO): Enabling NQ1 output
2013-12-16T21:26:12.531Z,1387229172.531 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD0505 01 1

2013-12-16T21:26:14.542Z,1387229174.542 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:26:14.542Z,1387229174.542 [DVL_micro](INFO): Querying output modes
2013-12-16T21:26:14.543Z,1387229174.543 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD0606

2013-12-16T21:26:15.059Z,1387229175.059 [DataOverHttps](INFO): tcpConnect
2013-12-16T21:26:15.459Z,1387229175.459 [DataOverHttps](INFO): tcpConnecting
2013-12-16T21:26:15.459Z,1387229175.459 [DataOverHttps](INFO): sslConnect
2013-12-16T21:26:15.461Z,1387229175.461 [DataOverHttps](INFO): sslConnecting
2013-12-16T21:26:15.860Z,1387229175.860 [DataOverHttps](INFO): sslConnecting
2013-12-16T21:26:16.398Z,1387229176.398 [DataOverHttps](INFO): sslConnecting
2013-12-16T21:26:16.400Z,1387229176.400 [DataOverHttps](INFO): dataWrite
2013-12-16T21:26:16.400Z,1387229176.400 [DataOverHttps](INFO): dataWriting
2013-12-16T21:26:16.402Z,1387229176.402 [DataOverHttps](INFO): Wrote 206 bytes.
2013-12-16T21:26:16.549Z,1387229176.549 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:26:16.549Z,1387229176.549 [DVL_micro](INFO): Output Modes: No Response
2013-12-16T21:26:16.550Z,1387229176.550 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD2525

2013-12-16T21:26:16.773Z,1387229176.773 [DataOverHttps](INFO): dataRead
2013-12-16T21:26:17.170Z,1387229177.170 [DataOverHttps](INFO): dataRead
2013-12-16T21:26:17.170Z,1387229177.170 [DataOverHttps](INFO): disconnect
2013-12-16T21:26:18.552Z,1387229178.552 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:26:20.556Z,1387229180.556 [DVL_micro](INFO): NQ1 requested
2013-12-16T21:26:20.556Z,1387229180.556 [DVL_micro](INFO): Cycling power to configure device.
2013-12-16T21:26:21.994Z,1387229181.994 [NAL9602](ERROR): NAL9602 initialize uart error: serial timeout
2013-12-16T21:26:21.994Z,1387229181.994 [NAL9602] Communications Fault, FailCount= 1
2013-12-16T21:26:21.994Z,1387229181.994 [NAL9602](ERROR): Communications Fault
2013-12-16T21:26:22.023Z,1387229182.023 [CBIT](CRITICAL): Environmental Failure. Press:14.982194 PSI. Humidity:10%. Temp:21 C. ABORTING MISSION
2013-12-16T21:26:22.023Z,1387229182.023 [CBIT](ERROR): Communications Fault in component: NAL9602
2013-12-16T21:26:22.086Z,1387229182.086 [NAL9602](INFO): Powering down
2013-12-16T21:26:22.559Z,1387229182.559 [DVL_micro](INFO): Opening uart, block timeout 10ths=20
2013-12-16T21:26:22.559Z,1387229182.559 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD1616 00 0

2013-12-16T21:26:22.863Z,1387229182.863 [CBIT](INFO): Clearing failed state for component NAL9602
2013-12-16T21:26:22.863Z,1387229182.863 [NAL9602] No Fault, FailCount= 1
2013-12-16T21:26:24.562Z,1387229184.562 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:26:24.562Z,1387229184.562 [DVL_micro](INFO): Enabling NQ1 output
2013-12-16T21:26:24.562Z,1387229184.562 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD0505 01 1

2013-12-16T21:26:26.569Z,1387229186.569 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:26:26.569Z,1387229186.569 [DVL_micro](INFO): Querying output modes
2013-12-16T21:26:26.569Z,1387229186.569 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD0606

2013-12-16T21:26:27.244Z,1387229187.244 [NAL9602](INFO): Powering up NAL9602
2013-12-16T21:26:28.575Z,1387229188.575 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:26:28.575Z,1387229188.575 [DVL_micro](INFO): Output Modes: No Response
2013-12-16T21:26:28.575Z,1387229188.575 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD2525

2013-12-16T21:26:30.062Z,1387229190.062 [CBIT](INFO): Clearing failed count for component AHRS_sp3003D
2013-12-16T21:26:30.063Z,1387229190.063 [AHRS_sp3003D] No Fault, FailCount= 5
2013-12-16T21:26:30.439Z,1387229190.439 [AHRS_sp3003D](DEBUG): Initializing AHRS_sp3003D.
2013-12-16T21:26:30.583Z,1387229190.583 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:26:31.585Z,1387229191.585 [AHRS_sp3003D](ERROR): readHeadingMagBin UART error: serial timeout
2013-12-16T21:26:31.585Z,1387229191.585 [AHRS_sp3003D](ERROR): SP3003D failed to initialize
2013-12-16T21:26:31.585Z,1387229191.585 [AHRS_sp3003D] Hardware Fault, FailCount= 1
2013-12-16T21:26:31.585Z,1387229191.585 [AHRS_sp3003D](ERROR): Hardware Fault
2013-12-16T21:26:31.610Z,1387229191.610 [CBIT](ERROR): Hardware Fault in component: AHRS_sp3003D
2013-12-16T21:26:31.640Z,1387229191.640 [AHRS_sp3003D](INFO): Powering down
2013-12-16T21:26:32.587Z,1387229192.587 [DVL_micro](INFO): NQ1 requested
2013-12-16T21:26:32.587Z,1387229192.587 [DVL_micro](INFO): Cycling power to configure device.
2013-12-16T21:26:32.891Z,1387229192.891 [CBIT](INFO): Clearing failed state for component AHRS_sp3003D
2013-12-16T21:26:32.891Z,1387229192.891 [AHRS_sp3003D] No Fault, FailCount= 1
2013-12-16T21:26:33.239Z,1387229193.239 [AHRS_sp3003D](DEBUG): Initializing AHRS_sp3003D.
2013-12-16T21:26:34.381Z,1387229194.381 [AHRS_sp3003D](ERROR): readHeadingMagBin UART error: serial timeout
2013-12-16T21:26:34.381Z,1387229194.381 [AHRS_sp3003D](ERROR): SP3003D failed to initialize
2013-12-16T21:26:34.381Z,1387229194.381 [AHRS_sp3003D] Hardware Fault, FailCount= 2
2013-12-16T21:26:34.381Z,1387229194.381 [AHRS_sp3003D](ERROR): Hardware Fault
2013-12-16T21:26:34.415Z,1387229194.415 [CBIT](ERROR): Hardware Fault in component: AHRS_sp3003D
2013-12-16T21:26:34.441Z,1387229194.441 [AHRS_sp3003D](INFO): Powering down
2013-12-16T21:26:34.590Z,1387229194.590 [DVL_micro](INFO): Opening uart, block timeout 10ths=20
2013-12-16T21:26:34.590Z,1387229194.590 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD1616 00 0

2013-12-16T21:26:35.664Z,1387229195.664 [CBIT](INFO): Clearing failed state for component AHRS_sp3003D
2013-12-16T21:26:35.664Z,1387229195.664 [AHRS_sp3003D] No Fault, FailCount= 2
2013-12-16T21:26:36.039Z,1387229196.039 [AHRS_sp3003D](DEBUG): Initializing AHRS_sp3003D.
2013-12-16T21:26:36.592Z,1387229196.592 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:26:36.593Z,1387229196.593 [DVL_micro](INFO): Enabling NQ1 output
2013-12-16T21:26:36.593Z,1387229196.593 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD0505 01 1

2013-12-16T21:26:37.173Z,1387229197.173 [AHRS_sp3003D](ERROR): readHeadingMagBin UART error: serial timeout
2013-12-16T21:26:37.174Z,1387229197.174 [AHRS_sp3003D](ERROR): SP3003D failed to initialize
2013-12-16T21:26:37.174Z,1387229197.174 [AHRS_sp3003D] Hardware Fault, FailCount= 3
2013-12-16T21:26:37.174Z,1387229197.174 [AHRS_sp3003D](ERROR): Hardware Fault
2013-12-16T21:26:37.206Z,1387229197.206 [CBIT](ERROR): Hardware Fault in component: AHRS_sp3003D
2013-12-16T21:26:37.238Z,1387229197.238 [AHRS_sp3003D](INFO): Powering down
2013-12-16T21:26:38.604Z,1387229198.604 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:26:38.604Z,1387229198.604 [DVL_micro](INFO): Querying output modes
2013-12-16T21:26:38.604Z,1387229198.604 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD0606

2013-12-16T21:26:39.661Z,1387229199.661 [NAL9602](ERROR): NAL9602 initialize uart error: serial timeout
2013-12-16T21:26:39.661Z,1387229199.661 [NAL9602] Communications Fault, FailCount= 2
2013-12-16T21:26:39.661Z,1387229199.661 [NAL9602](ERROR): Communications Fault
2013-12-16T21:26:39.699Z,1387229199.699 [CBIT](INFO): Clearing failed count for component MassServo
2013-12-16T21:26:39.699Z,1387229199.699 [MassServo] No Fault, FailCount= 5
2013-12-16T21:26:39.700Z,1387229199.700 [CBIT](ERROR): Communications Fault in component: NAL9602
2013-12-16T21:26:39.700Z,1387229199.700 [CBIT](CRITICAL): Communications Fault in component: NAL9602
2013-12-16T21:26:39.807Z,1387229199.807 [NAL9602](INFO): Powering down
2013-12-16T21:26:40.146Z,1387229200.146 [CBIT](INFO): Clearing failed state for component AHRS_sp3003D
2013-12-16T21:26:40.146Z,1387229200.146 [AHRS_sp3003D] No Fault, FailCount= 3
2013-12-16T21:26:40.514Z,1387229200.514 [AHRS_sp3003D](DEBUG): Initializing AHRS_sp3003D.
2013-12-16T21:26:40.611Z,1387229200.611 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:26:40.611Z,1387229200.611 [DVL_micro](INFO): Output Modes: No Response
2013-12-16T21:26:40.611Z,1387229200.611 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD2525

2013-12-16T21:26:41.448Z,1387229201.448 [MassServo](FAULT): Mass shifter EEPROM initialization uart error serial timeout
2013-12-16T21:26:41.448Z,1387229201.448 [MassServo] Communications Fault, FailCount= 1
2013-12-16T21:26:41.448Z,1387229201.448 [MassServo](ERROR): Communications Fault
2013-12-16T21:26:41.451Z,1387229201.451 [CBIT](ERROR): Communications Fault in component: MassServo
2013-12-16T21:26:41.805Z,1387229201.805 [AHRS_sp3003D](ERROR): readHeadingMagBin UART error: serial timeout
2013-12-16T21:26:41.805Z,1387229201.805 [AHRS_sp3003D](ERROR): SP3003D failed to initialize
2013-12-16T21:26:41.805Z,1387229201.805 [AHRS_sp3003D] Hardware Fault, FailCount= 4
2013-12-16T21:26:41.805Z,1387229201.805 [AHRS_sp3003D](ERROR): Hardware Fault
2013-12-16T21:26:41.828Z,1387229201.828 [MassServo](DEBUG): Uninitialize Mass Servo.
2013-12-16T21:26:41.828Z,1387229201.828 [MassServo](INFO): Powering down
2013-12-16T21:26:41.831Z,1387229201.831 [CBIT](ERROR): Hardware Fault in component: AHRS_sp3003D
2013-12-16T21:26:41.888Z,1387229201.888 [AHRS_sp3003D](INFO): Powering down
2013-12-16T21:26:42.301Z,1387229202.301 [MassServo](DEBUG): Initializing EZServoServo.
2013-12-16T21:26:42.422Z,1387229202.422 [MassServo](DEBUG): Initializing MassServo.
2013-12-16T21:26:42.426Z,1387229202.426 [CBIT](INFO): Clearing failed state for component MassServo
2013-12-16T21:26:42.426Z,1387229202.426 [MassServo] No Fault, FailCount= 1
2013-12-16T21:26:42.622Z,1387229202.622 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:26:43.118Z,1387229203.118 [CBIT](INFO): Clearing failed state for component AHRS_sp3003D
2013-12-16T21:26:43.118Z,1387229203.118 [AHRS_sp3003D] No Fault, FailCount= 4
2013-12-16T21:26:43.467Z,1387229203.467 [AHRS_sp3003D](DEBUG): Initializing AHRS_sp3003D.
2013-12-16T21:26:44.617Z,1387229204.617 [AHRS_sp3003D](ERROR): readHeadingMagBin UART error: serial timeout
2013-12-16T21:26:44.617Z,1387229204.617 [AHRS_sp3003D](ERROR): SP3003D failed to initialize
2013-12-16T21:26:44.617Z,1387229204.617 [AHRS_sp3003D] Hardware Fault, FailCount= 5
2013-12-16T21:26:44.617Z,1387229204.617 [AHRS_sp3003D](ERROR): Hardware Fault
2013-12-16T21:26:44.626Z,1387229204.626 [DVL_micro](INFO): NQ1 requested
2013-12-16T21:26:44.626Z,1387229204.626 [DVL_micro](INFO): Cycling power to configure device.
2013-12-16T21:26:45.154Z,1387229205.154 [MassServo](FAULT): Mass shifter EEPROM initialization uart error serial timeout
2013-12-16T21:26:45.154Z,1387229205.154 [MassServo] Communications Fault, FailCount= 2
2013-12-16T21:26:45.154Z,1387229205.154 [MassServo](ERROR): Communications Fault
2013-12-16T21:26:45.157Z,1387229205.157 [CBIT](ERROR): Communications Fault in component: MassServo
2013-12-16T21:26:45.157Z,1387229205.157 [CBIT](ERROR): Hardware Fault in component: AHRS_sp3003D
2013-12-16T21:26:45.158Z,1387229205.158 [CBIT](CRITICAL): Hardware Fault in component: AHRS_sp3003D
2013-12-16T21:26:45.198Z,1387229205.198 [AHRS_sp3003D](INFO): Powering down
2013-12-16T21:26:45.287Z,1387229205.287 [DataOverHttps](INFO): tcpConnect
2013-12-16T21:26:45.315Z,1387229205.315 [MassServo](DEBUG): Uninitialize Mass Servo.
2013-12-16T21:26:45.315Z,1387229205.315 [MassServo](INFO): Powering down
2013-12-16T21:26:45.574Z,1387229205.574 [DataOverHttps](INFO): tcpConnecting
2013-12-16T21:26:45.574Z,1387229205.574 [DataOverHttps](INFO): sslConnect
2013-12-16T21:26:45.576Z,1387229205.576 [DataOverHttps](INFO): sslConnecting
2013-12-16T21:26:45.975Z,1387229205.975 [DataOverHttps](INFO): sslConnecting
2013-12-16T21:26:46.491Z,1387229206.491 [MassServo](DEBUG): Initializing EZServoServo.
2013-12-16T21:26:46.609Z,1387229206.609 [MassServo](DEBUG): Initializing MassServo.
2013-12-16T21:26:46.613Z,1387229206.613 [CBIT](CRITICAL): Environmental Failure. Press:14.451184 PSI. Humidity:10%. Temp:21 C. ABORTING MISSION
2013-12-16T21:26:46.613Z,1387229206.613 [CBIT](INFO): Clearing failed state for component MassServo
2013-12-16T21:26:46.614Z,1387229206.614 [MassServo] No Fault, FailCount= 2
2013-12-16T21:26:46.628Z,1387229206.628 [DVL_micro](INFO): Opening uart, block timeout 10ths=20
2013-12-16T21:26:46.629Z,1387229206.629 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD1616 00 0

2013-12-16T21:26:46.632Z,1387229206.632 [DataOverHttps](INFO): sslConnecting
2013-12-16T21:26:46.634Z,1387229206.634 [DataOverHttps](INFO): dataWrite
2013-12-16T21:26:46.634Z,1387229206.634 [DataOverHttps](INFO): dataWriting
2013-12-16T21:26:46.636Z,1387229206.636 [DataOverHttps](INFO): Wrote 206 bytes.
2013-12-16T21:26:47.028Z,1387229207.028 [DataOverHttps](INFO): dataRead
2013-12-16T21:26:47.429Z,1387229207.429 [DataOverHttps](INFO): dataRead
2013-12-16T21:26:47.429Z,1387229207.429 [DataOverHttps](INFO): disconnect
2013-12-16T21:26:48.631Z,1387229208.631 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:26:48.632Z,1387229208.632 [DVL_micro](INFO): Enabling NQ1 output
2013-12-16T21:26:48.632Z,1387229208.632 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD0505 01 1

2013-12-16T21:26:49.164Z,1387229209.164 [MassServo](FAULT): Mass shifter EEPROM initialization uart error serial timeout
2013-12-16T21:26:49.164Z,1387229209.164 [MassServo] Communications Fault, FailCount= 3
2013-12-16T21:26:49.164Z,1387229209.164 [MassServo](ERROR): Communications Fault
2013-12-16T21:26:49.175Z,1387229209.175 [CBIT](ERROR): Communications Fault in component: MassServo
2013-12-16T21:26:49.227Z,1387229209.227 [MassServo](DEBUG): Uninitialize Mass Servo.
2013-12-16T21:26:49.227Z,1387229209.227 [MassServo](INFO): Powering down
2013-12-16T21:26:50.011Z,1387229210.011 [MassServo](DEBUG): Initializing EZServoServo.
2013-12-16T21:26:50.126Z,1387229210.126 [MassServo](DEBUG): Initializing MassServo.
2013-12-16T21:26:50.130Z,1387229210.130 [CBIT](INFO): Clearing failed state for component MassServo
2013-12-16T21:26:50.130Z,1387229210.130 [MassServo] No Fault, FailCount= 3
2013-12-16T21:26:50.634Z,1387229210.634 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:26:50.634Z,1387229210.634 [DVL_micro](INFO): Querying output modes
2013-12-16T21:26:50.635Z,1387229210.635 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD0606

2013-12-16T21:26:52.525Z,1387229212.525 [MassServo](FAULT): Mass shifter EEPROM initialization uart error serial timeout
2013-12-16T21:26:52.525Z,1387229212.525 [MassServo] Communications Fault, FailCount= 4
2013-12-16T21:26:52.525Z,1387229212.525 [MassServo](ERROR): Communications Fault
2013-12-16T21:26:52.529Z,1387229212.529 [CBIT](ERROR): Communications Fault in component: MassServo
2013-12-16T21:26:52.603Z,1387229212.603 [MassServo](DEBUG): Uninitialize Mass Servo.
2013-12-16T21:26:52.603Z,1387229212.603 [MassServo](INFO): Powering down
2013-12-16T21:26:52.645Z,1387229212.645 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:26:52.645Z,1387229212.645 [DVL_micro](INFO): Output Modes: No Response
2013-12-16T21:26:52.646Z,1387229212.646 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD2525

2013-12-16T21:26:53.395Z,1387229213.395 [MassServo](DEBUG): Initializing EZServoServo.
2013-12-16T21:26:53.516Z,1387229213.516 [MassServo](DEBUG): Initializing MassServo.
2013-12-16T21:26:53.519Z,1387229213.519 [CBIT](INFO): Clearing failed state for component MassServo
2013-12-16T21:26:53.519Z,1387229213.519 [MassServo] No Fault, FailCount= 4
2013-12-16T21:26:54.656Z,1387229214.656 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:26:55.882Z,1387229215.882 [MassServo](FAULT): Mass shifter EEPROM initialization uart error serial timeout
2013-12-16T21:26:55.882Z,1387229215.882 [MassServo] Communications Fault, FailCount= 5
2013-12-16T21:26:55.883Z,1387229215.883 [MassServo](ERROR): Communications Fault
2013-12-16T21:26:55.886Z,1387229215.886 [CBIT](ERROR): Communications Fault in component: MassServo
2013-12-16T21:26:55.886Z,1387229215.886 [CBIT](CRITICAL): Communications Fault in component: MassServo
2013-12-16T21:26:55.923Z,1387229215.923 [MassServo](DEBUG): Uninitialize Mass Servo.
2013-12-16T21:26:55.924Z,1387229215.924 [MassServo](INFO): Powering down
2013-12-16T21:26:56.670Z,1387229216.670 [DVL_micro](INFO): NQ1 requested
2013-12-16T21:26:56.670Z,1387229216.670 [DVL_micro](INFO): Cycling power to configure device.
2013-12-16T21:26:56.733Z,1387229216.733 [MassServo](DEBUG): Initializing EZServoServo.
2013-12-16T21:26:56.853Z,1387229216.853 [MassServo](DEBUG): Initializing MassServo.
2013-12-16T21:26:58.675Z,1387229218.675 [DVL_micro](INFO): Opening uart, block timeout 10ths=20
2013-12-16T21:26:58.675Z,1387229218.675 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD1616 00 0

2013-12-16T21:27:00.686Z,1387229220.686 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:27:00.686Z,1387229220.686 [DVL_micro](INFO): Enabling NQ1 output
2013-12-16T21:27:00.686Z,1387229220.686 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD0505 01 1

2013-12-16T21:27:02.705Z,1387229222.705 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:27:02.705Z,1387229222.705 [DVL_micro](INFO): Querying output modes
2013-12-16T21:27:02.705Z,1387229222.705 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD0606

2013-12-16T21:27:04.712Z,1387229224.712 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:27:04.712Z,1387229224.712 [DVL_micro](INFO): Output Modes: No Response
2013-12-16T21:27:04.713Z,1387229224.713 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD2525

2013-12-16T21:27:06.715Z,1387229226.715 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:27:08.719Z,1387229228.719 [DVL_micro](INFO): NQ1 requested
2013-12-16T21:27:08.719Z,1387229228.719 [DVL_micro](INFO): Cycling power to configure device.
2013-12-16T21:27:10.722Z,1387229230.722 [DVL_micro](INFO): Opening uart, block timeout 10ths=20
2013-12-16T21:27:10.722Z,1387229230.722 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD1616 00 0

2013-12-16T21:27:12.728Z,1387229232.728 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:27:12.729Z,1387229232.729 [DVL_micro](INFO): Enabling NQ1 output
2013-12-16T21:27:12.729Z,1387229232.729 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD0505 01 1

2013-12-16T21:27:14.732Z,1387229234.732 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:27:14.732Z,1387229234.732 [DVL_micro](INFO): Querying output modes
2013-12-16T21:27:14.732Z,1387229234.732 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD0606

2013-12-16T21:27:15.500Z,1387229235.500 [DataOverHttps](INFO): tcpConnect
2013-12-16T21:27:15.901Z,1387229235.901 [DataOverHttps](INFO): tcpConnecting
2013-12-16T21:27:15.901Z,1387229235.901 [DataOverHttps](INFO): sslConnect
2013-12-16T21:27:15.902Z,1387229235.902 [DataOverHttps](INFO): sslConnecting
2013-12-16T21:27:16.301Z,1387229236.302 [DataOverHttps](INFO): sslConnecting
2013-12-16T21:27:16.739Z,1387229236.739 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:27:16.739Z,1387229236.739 [DVL_micro](INFO): Output Modes: No Response
2013-12-16T21:27:16.739Z,1387229236.739 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD2525

2013-12-16T21:27:16.819Z,1387229236.819 [DataOverHttps](INFO): sslConnecting
2013-12-16T21:27:16.821Z,1387229236.821 [DataOverHttps](INFO): dataWrite
2013-12-16T21:27:16.822Z,1387229236.822 [DataOverHttps](INFO): dataWriting
2013-12-16T21:27:16.823Z,1387229236.823 [DataOverHttps](INFO): Wrote 206 bytes.
2013-12-16T21:27:17.219Z,1387229237.219 [DataOverHttps](INFO): dataRead
2013-12-16T21:27:17.619Z,1387229237.619 [DataOverHttps](INFO): dataRead
2013-12-16T21:27:17.621Z,1387229237.621 [DataOverHttps](INFO): disconnect
2013-12-16T21:27:18.750Z,1387229238.750 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:27:20.762Z,1387229240.762 [DVL_micro](INFO): NQ1 requested
2013-12-16T21:27:20.762Z,1387229240.762 [DVL_micro](INFO): Cycling power to configure device.
2013-12-16T21:27:22.764Z,1387229242.764 [DVL_micro](INFO): Opening uart, block timeout 10ths=20
2013-12-16T21:27:22.765Z,1387229242.765 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD1616 00 0

2013-12-16T21:27:24.769Z,1387229244.769 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:27:24.769Z,1387229244.769 [DVL_micro](INFO): Enabling NQ1 output
2013-12-16T21:27:24.770Z,1387229244.770 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD0505 01 1

2013-12-16T21:27:26.782Z,1387229246.782 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:27:26.782Z,1387229246.782 [DVL_micro](INFO): Querying output modes
2013-12-16T21:27:26.783Z,1387229246.783 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD0606

2013-12-16T21:27:28.793Z,1387229248.793 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:27:28.793Z,1387229248.793 [DVL_micro](INFO): Output Modes: No Response
2013-12-16T21:27:28.794Z,1387229248.794 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD2525

2013-12-16T21:27:30.804Z,1387229250.804 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:27:32.824Z,1387229252.824 [DVL_micro](INFO): NQ1 requested
2013-12-16T21:27:32.824Z,1387229252.824 [DVL_micro](INFO): Cycling power to configure device.
2013-12-16T21:27:34.827Z,1387229254.827 [DVL_micro](INFO): Opening uart, block timeout 10ths=20
2013-12-16T21:27:34.828Z,1387229254.828 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD1616 00 0

2013-12-16T21:27:36.834Z,1387229256.834 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:27:36.834Z,1387229256.834 [DVL_micro](INFO): Enabling NQ1 output
2013-12-16T21:27:36.834Z,1387229256.834 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD0505 01 1

2013-12-16T21:27:38.837Z,1387229258.837 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:27:38.837Z,1387229258.837 [DVL_micro](INFO): Querying output modes
2013-12-16T21:27:38.837Z,1387229258.837 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD0606

2013-12-16T21:27:40.848Z,1387229260.848 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:27:40.848Z,1387229260.848 [DVL_micro](INFO): Output Modes: No Response
2013-12-16T21:27:40.849Z,1387229260.849 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD2525

2013-12-16T21:27:42.851Z,1387229262.851 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:27:44.863Z,1387229264.863 [DVL_micro](INFO): NQ1 requested
2013-12-16T21:27:44.863Z,1387229264.863 [DVL_micro](INFO): Cycling power to configure device.
2013-12-16T21:27:45.619Z,1387229265.619 [DataOverHttps](INFO): tcpConnect
2013-12-16T21:27:46.019Z,1387229266.019 [DataOverHttps](INFO): tcpConnecting
2013-12-16T21:27:46.020Z,1387229266.020 [DataOverHttps](INFO): sslConnect
2013-12-16T21:27:46.022Z,1387229266.022 [DataOverHttps](INFO): sslConnecting
2013-12-16T21:27:46.420Z,1387229266.420 [DataOverHttps](INFO): sslConnecting
2013-12-16T21:27:46.866Z,1387229266.866 [DVL_micro](INFO): Opening uart, block timeout 10ths=20
2013-12-16T21:27:46.866Z,1387229266.866 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD1616 00 0

2013-12-16T21:27:46.931Z,1387229266.931 [DataOverHttps](INFO): sslConnecting
2013-12-16T21:27:46.933Z,1387229266.933 [DataOverHttps](INFO): dataWrite
2013-12-16T21:27:46.933Z,1387229266.933 [DataOverHttps](INFO): dataWriting
2013-12-16T21:27:46.935Z,1387229266.935 [DataOverHttps](INFO): Wrote 206 bytes.
2013-12-16T21:27:47.333Z,1387229267.333 [DataOverHttps](INFO): dataRead
2013-12-16T21:27:47.734Z,1387229267.734 [DataOverHttps](INFO): dataRead
2013-12-16T21:27:47.735Z,1387229267.735 [DataOverHttps](INFO): disconnect
2013-12-16T21:27:48.877Z,1387229268.877 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:27:48.877Z,1387229268.877 [DVL_micro](INFO): Enabling NQ1 output
2013-12-16T21:27:48.877Z,1387229268.877 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD0505 01 1

2013-12-16T21:27:50.880Z,1387229270.880 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:27:50.880Z,1387229270.880 [DVL_micro](INFO): Querying output modes
2013-12-16T21:27:50.880Z,1387229270.880 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD0606

2013-12-16T21:27:52.891Z,1387229272.891 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:27:52.891Z,1387229272.891 [DVL_micro](INFO): Output Modes: No Response
2013-12-16T21:27:52.891Z,1387229272.891 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD2525

2013-12-16T21:27:54.898Z,1387229274.898 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:27:56.909Z,1387229276.909 [DVL_micro](INFO): NQ1 requested
2013-12-16T21:27:56.910Z,1387229276.910 [DVL_micro](INFO): Cycling power to configure device.
2013-12-16T21:27:58.912Z,1387229278.912 [DVL_micro](INFO): Opening uart, block timeout 10ths=20
2013-12-16T21:27:58.913Z,1387229278.913 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD1616 00 0

2013-12-16T21:28:00.915Z,1387229280.915 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:28:00.915Z,1387229280.915 [DVL_micro](INFO): Enabling NQ1 output
2013-12-16T21:28:00.915Z,1387229280.915 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD0505 01 1

2013-12-16T21:28:02.939Z,1387229282.939 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:28:02.939Z,1387229282.939 [DVL_micro](INFO): Querying output modes
2013-12-16T21:28:02.939Z,1387229282.939 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD0606

2013-12-16T21:28:04.950Z,1387229284.950 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:28:04.950Z,1387229284.950 [DVL_micro](INFO): Output Modes: No Response
2013-12-16T21:28:04.950Z,1387229284.950 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD2525

2013-12-16T21:28:06.957Z,1387229286.957 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:28:08.976Z,1387229288.976 [DVL_micro](INFO): NQ1 requested
2013-12-16T21:28:08.976Z,1387229288.976 [DVL_micro](INFO): Cycling power to configure device.
2013-12-16T21:28:10.979Z,1387229290.979 [DVL_micro](INFO): Opening uart, block timeout 10ths=20
2013-12-16T21:28:10.980Z,1387229290.980 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD1616 00 0

2013-12-16T21:28:12.157Z,1387229292.157 [CBIT](INFO): Clearing failed count for component DAT
2013-12-16T21:28:12.157Z,1387229292.157 [DAT] No Fault, FailCount= 3
2013-12-16T21:28:12.548Z,1387229292.548 [DAT](INFO): Powering up
2013-12-16T21:28:12.549Z,1387229292.549 [DAT](DEBUG): Initializing DAT.
2013-12-16T21:28:12.986Z,1387229292.986 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:28:12.986Z,1387229292.986 [DVL_micro](INFO): Enabling NQ1 output
2013-12-16T21:28:12.986Z,1387229292.986 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD0505 01 1

2013-12-16T21:28:14.997Z,1387229294.997 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:28:14.997Z,1387229294.997 [DVL_micro](INFO): Querying output modes
2013-12-16T21:28:14.997Z,1387229294.997 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD0606

2013-12-16T21:28:15.734Z,1387229295.734 [DataOverHttps](INFO): tcpConnect
2013-12-16T21:28:16.135Z,1387229296.135 [DataOverHttps](INFO): tcpConnecting
2013-12-16T21:28:16.136Z,1387229296.136 [DataOverHttps](INFO): sslConnect
2013-12-16T21:28:16.137Z,1387229296.137 [DataOverHttps](INFO): sslConnecting
2013-12-16T21:28:16.535Z,1387229296.535 [DataOverHttps](INFO): sslConnecting
2013-12-16T21:28:17.008Z,1387229297.008 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:28:17.009Z,1387229297.009 [DVL_micro](INFO): Output Modes: No Response
2013-12-16T21:28:17.009Z,1387229297.009 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD2525

2013-12-16T21:28:17.043Z,1387229297.043 [DataOverHttps](INFO): sslConnecting
2013-12-16T21:28:17.046Z,1387229297.046 [DataOverHttps](INFO): dataWrite
2013-12-16T21:28:17.046Z,1387229297.046 [DataOverHttps](INFO): dataWriting
2013-12-16T21:28:17.047Z,1387229297.047 [DataOverHttps](INFO): Wrote 206 bytes.
2013-12-16T21:28:17.445Z,1387229297.445 [DataOverHttps](INFO): dataRead
2013-12-16T21:28:17.845Z,1387229297.845 [DataOverHttps](INFO): dataRead
2013-12-16T21:28:17.845Z,1387229297.845 [DataOverHttps](INFO): disconnect
2013-12-16T21:28:19.011Z,1387229299.011 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:28:21.023Z,1387229301.023 [DVL_micro](INFO): NQ1 requested
2013-12-16T21:28:21.023Z,1387229301.023 [DVL_micro](INFO): Cycling power to configure device.
2013-12-16T21:28:23.026Z,1387229303.026 [DVL_micro](INFO): Opening uart, block timeout 10ths=20
2013-12-16T21:28:23.026Z,1387229303.026 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD1616 00 0

2013-12-16T21:28:25.045Z,1387229305.045 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:28:25.045Z,1387229305.045 [DVL_micro](INFO): Enabling NQ1 output
2013-12-16T21:28:25.045Z,1387229305.045 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD0505 01 1

2013-12-16T21:28:27.052Z,1387229307.052 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:28:27.052Z,1387229307.052 [DVL_micro](INFO): Querying output modes
2013-12-16T21:28:27.052Z,1387229307.052 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD0606

2013-12-16T21:28:29.055Z,1387229309.055 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:28:29.055Z,1387229309.055 [DVL_micro](INFO): Output Modes: No Response
2013-12-16T21:28:29.055Z,1387229309.055 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD2525

2013-12-16T21:28:31.066Z,1387229311.066 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:28:32.164Z,1387229312.164 [DAT](INFO): Init failed - response: 
2013-12-16T21:28:32.164Z,1387229312.164 [DAT](FAULT): DAT failed to initialize
2013-12-16T21:28:32.164Z,1387229312.164 [DAT] Communications Fault, FailCount= 1
2013-12-16T21:28:32.164Z,1387229312.164 [DAT](ERROR): Communications Fault
2013-12-16T21:28:32.202Z,1387229312.202 [CBIT](ERROR): Communications Fault in component: DAT
2013-12-16T21:28:32.256Z,1387229312.256 [DAT](INFO): Powering down
2013-12-16T21:28:33.080Z,1387229313.080 [DVL_micro](INFO): NQ1 requested
2013-12-16T21:28:33.080Z,1387229313.080 [DVL_micro](INFO): Cycling power to configure device.
2013-12-16T21:28:33.114Z,1387229313.114 [CBIT](INFO): Clearing failed state for component DAT
2013-12-16T21:28:33.114Z,1387229313.114 [DAT] No Fault, FailCount= 1
2013-12-16T21:28:35.085Z,1387229315.085 [DVL_micro](INFO): Opening uart, block timeout 10ths=20
2013-12-16T21:28:35.085Z,1387229315.085 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD1616 00 0

2013-12-16T21:28:35.460Z,1387229315.460 [DAT](INFO): Powering up
2013-12-16T21:28:35.460Z,1387229315.460 [DAT](DEBUG): Initializing DAT.
2013-12-16T21:28:37.091Z,1387229317.091 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:28:37.091Z,1387229317.091 [DVL_micro](INFO): Enabling NQ1 output
2013-12-16T21:28:37.092Z,1387229317.092 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD0505 01 1

2013-12-16T21:28:39.098Z,1387229319.098 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:28:39.099Z,1387229319.099 [DVL_micro](INFO): Querying output modes
2013-12-16T21:28:39.099Z,1387229319.099 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD0606

2013-12-16T21:28:39.885Z,1387229319.885 [CBIT](INFO): Clearing failed count for component NAL9602
2013-12-16T21:28:39.885Z,1387229319.885 [NAL9602] No Fault, FailCount= 2
2013-12-16T21:28:40.254Z,1387229320.254 [NAL9602](INFO): Powering up NAL9602
2013-12-16T21:28:41.110Z,1387229321.110 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:28:41.110Z,1387229321.110 [DVL_micro](INFO): Output Modes: No Response
2013-12-16T21:28:41.110Z,1387229321.110 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD2525

2013-12-16T21:28:43.121Z,1387229323.121 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:28:44.687Z,1387229324.687 [Default:CallIridium] Running Loop=1
2013-12-16T21:28:44.691Z,1387229324.691 [Default:CallIridium](INFO): Aggregate::initialize Default:CallIridium
2013-12-16T21:28:44.691Z,1387229324.691 [Default:CallIridium:A] Running Loop=1
2013-12-16T21:28:44.692Z,1387229324.692 [Default:CallIridium:A] Stopped
2013-12-16T21:28:44.692Z,1387229324.692 [Default:CallIridium:B] Running Loop=1
2013-12-16T21:28:44.692Z,1387229324.692 [Default:CallIridium:B](INFO): Aggregate::initialize Default:CallIridium:B
2013-12-16T21:28:45.092Z,1387229325.092 [Default:Iridium] Running Loop=1
2013-12-16T21:28:45.093Z,1387229325.093 [Default:Iridium](INFO): Aggregate::initialize Default:Iridium
2013-12-16T21:28:45.093Z,1387229325.093 [Default:Iridium:A.SetSpeed] Running Loop=1
2013-12-16T21:28:45.093Z,1387229325.093 [Default:Iridium:A.SetSpeed](DEBUG): Initialize.
2013-12-16T21:28:45.093Z,1387229325.093 [Default:Iridium:B.GoToSurface] Running Loop=1
2013-12-16T21:28:45.093Z,1387229325.093 [Default:Iridium:B.GoToSurface](DEBUG): Initialize GoToSurfaceComponent.
2013-12-16T21:28:45.094Z,1387229325.094 [Default:Iridium:B.GoToSurface] Stopped
2013-12-16T21:28:45.094Z,1387229325.094 [Default:Iridium:B.GoToSurface](DEBUG): Uninitialize GoToSurfaceComponent.
2013-12-16T21:28:45.094Z,1387229325.094 [Default:Iridium:Read_Iridium] Running Loop=1
2013-12-16T21:28:45.128Z,1387229325.128 [DVL_micro](INFO): NQ1 requested
2013-12-16T21:28:45.128Z,1387229325.128 [DVL_micro](INFO): Cycling power to configure device.
2013-12-16T21:28:46.148Z,1387229326.148 [DataOverHttps](INFO): tcpConnect
2013-12-16T21:28:46.285Z,1387229326.285 [DataOverHttps](INFO): tcpConnecting
2013-12-16T21:28:46.285Z,1387229326.285 [DataOverHttps](INFO): sslConnect
2013-12-16T21:28:46.286Z,1387229326.286 [DataOverHttps](INFO): sslConnecting
2013-12-16T21:28:46.686Z,1387229326.686 [DataOverHttps](INFO): sslConnecting
2013-12-16T21:28:47.131Z,1387229327.131 [DVL_micro](INFO): Opening uart, block timeout 10ths=20
2013-12-16T21:28:47.132Z,1387229327.132 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD1616 00 0

2013-12-16T21:28:47.213Z,1387229327.213 [DataOverHttps](INFO): sslConnecting
2013-12-16T21:28:47.214Z,1387229327.214 [DataOverHttps](INFO): dataWrite
2013-12-16T21:28:47.216Z,1387229327.216 [DataOverHttps](INFO): encoded 545 bytes: %5d%00%00%04%00%97%01%00%00%00%00%00%00%00%15%1d%80%03%0cVb%02T%99%fb%ee%d8%1b%adiE%c4o%5b%2c%21%e9_5%93%1d%26%c76%25k%b7%a6%b1s%7c%23%eb%ca%e1%94%b4%b8U%28%8c%b0y%c9%d2X%d6%ef%1d%9a%d4h%3e%01%0d%f2%40%d3%d3%03ADL%eb%84S%e2%d5%dc0%f6%d2%ab%f0%0c%f3%3d%fdF%1b%f6%22%d4A%ef%9f%e0%c2V%1av%86%02%92W%eaX%8ax%3c0e%a0P%24%b4%9c%5d%acMN%27%85%13Lb%deS%15Q%d2%11%ab%dcF%c8%81%fa%5eCs%2c%f0+%8anUW%22%f4%d9%d71%3a.%0d%bb%f5%f1%e6f%a0%b5%bcT%e8i%bd6%e8%3c%c5%d4%90c%02%e5%c4%d1%fb%9f.%96~l%92C%a5A-%a7F%d5D%fc%84%da%22hq%24%c4%ba%c0+%a4P%7d%93%18%06%3c%1f
2013-12-16T21:28:47.217Z,1387229327.217 [DataOverHttps](INFO): Sending 223 bytes from file Logs/20131216T211549/Courier0012.lzma
2013-12-16T21:28:47.217Z,1387229327.217 [DataOverHttps](INFO): dataWriting
2013-12-16T21:28:47.221Z,1387229327.221 [DataOverHttps](INFO): Wrote 818 bytes.
2013-12-16T21:28:47.615Z,1387229327.615 [DataOverHttps](INFO): dataRead
2013-12-16T21:28:48.016Z,1387229328.016 [DataOverHttps](INFO): dataRead
2013-12-16T21:28:48.017Z,1387229328.017 [DataOverHttps](INFO): Moved sent file to Logs/20131216T211549/Courier0012.lzma.bak
2013-12-16T21:28:48.017Z,1387229328.017 [DataOverHttps](INFO): SBD MOMSN=271441
2013-12-16T21:28:48.017Z,1387229328.017 [DataOverHttps](INFO): disconnect
2013-12-16T21:28:48.947Z,1387229328.947 [DataOverHttps](INFO): tcpConnect
2013-12-16T21:28:49.026Z,1387229329.026 [DataOverHttps](INFO): tcpConnecting
2013-12-16T21:28:49.027Z,1387229329.027 [DataOverHttps](INFO): sslConnect
2013-12-16T21:28:49.028Z,1387229329.028 [DataOverHttps](INFO): sslConnecting
2013-12-16T21:28:49.138Z,1387229329.138 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:28:49.138Z,1387229329.138 [DVL_micro](INFO): Enabling NQ1 output
2013-12-16T21:28:49.138Z,1387229329.138 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD0505 01 1

2013-12-16T21:28:49.420Z,1387229329.420 [DataOverHttps](INFO): sslConnecting
2013-12-16T21:28:49.932Z,1387229329.932 [DataOverHttps](INFO): sslConnecting
2013-12-16T21:28:49.934Z,1387229329.934 [DataOverHttps](INFO): dataWrite
2013-12-16T21:28:49.935Z,1387229329.935 [DataOverHttps](INFO): encoded 439 bytes: %5d%00%00%04%00%c4%01%00%00%00%00%00%00%00%15%1d%80%03%0cVb%01zR%1e%dd%dasE%15%9d%15%c3%91%3f%c0%b8w%80%e0%1c%91%cf%8b%0f%a6%a7%f2%e1%bb%c9%ac%90%ec%2a%f9%3e%d5%0b%fd%a9d%229%c2%3dj%02%d1%f8%ca%a2%ed%0b%a6%3bu%9a%8f%97%dfg%24%5e%ca%2f%fc%b0%03%e6%ffTLB%02%01%ab%1a%8f%9et%d4u%60%d7%1fU%26%10h%a6%1a%da%e1H%b5%d0%0eAj%f2%e5%0a%cd%5emr%7fyIC%bd%03v%f7Hb%ad%91%cc%60%00%a2W9%2f%9f%0d%15%f6m%29Q%aea%097%b2CeO%5cgqJ%f3%08uM%14%7d%f2%d5T%8bf%00
2013-12-16T21:28:49.936Z,1387229329.936 [DataOverHttps](INFO): Sending 177 bytes from file Logs/20131216T211549/Express0013.lzma
2013-12-16T21:28:49.936Z,1387229329.936 [DataOverHttps](INFO): dataWriting
2013-12-16T21:28:49.938Z,1387229329.938 [DataOverHttps](INFO): Wrote 712 bytes.
2013-12-16T21:28:50.335Z,1387229330.335 [DataOverHttps](INFO): dataRead
2013-12-16T21:28:50.736Z,1387229330.736 [DataOverHttps](INFO): dataRead
2013-12-16T21:28:50.738Z,1387229330.738 [DataOverHttps](INFO): Moved sent file to Logs/20131216T211549/Express0013.lzma.bak
2013-12-16T21:28:50.738Z,1387229330.738 [DataOverHttps](INFO): SBD MOMSN=271449
2013-12-16T21:28:50.738Z,1387229330.738 [DataOverHttps](INFO): disconnect
2013-12-16T21:28:51.149Z,1387229331.149 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:28:51.149Z,1387229331.149 [DVL_micro](INFO): Querying output modes
2013-12-16T21:28:51.149Z,1387229331.149 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD0606

2013-12-16T21:28:52.760Z,1387229332.760 [NAL9602](ERROR): NAL9602 initialize uart error: serial timeout
2013-12-16T21:28:52.760Z,1387229332.760 [NAL9602] Communications Fault, FailCount= 1
2013-12-16T21:28:52.760Z,1387229332.760 [NAL9602](ERROR): Communications Fault
2013-12-16T21:28:52.799Z,1387229332.799 [CBIT](ERROR): Communications Fault in component: NAL9602
2013-12-16T21:28:53.152Z,1387229333.152 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:28:53.152Z,1387229333.152 [DVL_micro](INFO): Output Modes: No Response
2013-12-16T21:28:53.153Z,1387229333.153 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD2525

2013-12-16T21:28:53.478Z,1387229333.478 [DataOverHttps](INFO): tcpConnect
2013-12-16T21:28:53.481Z,1387229333.481 [NAL9602](INFO): Powering down
2013-12-16T21:28:55.159Z,1387229335.159 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:28:57.077Z,1387229337.077 [Default:Iridium:Read_Iridium] Stopped
2013-12-16T21:28:57.078Z,1387229337.078 [Default:Iridium](INFO): Completed Default:Iridium
2013-12-16T21:28:57.078Z,1387229337.078 [Default:Iridium] Stopped
2013-12-16T21:28:57.078Z,1387229337.078 [Default:Iridium](INFO): Aggregate::uninitialize Default:Iridium
2013-12-16T21:28:57.078Z,1387229337.078 [Default:Iridium:A.SetSpeed] Stopped
2013-12-16T21:28:57.078Z,1387229337.078 [Default:Iridium:A.SetSpeed](DEBUG): Uninitialize.
2013-12-16T21:28:57.161Z,1387229337.161 [DataOverHttps](INFO): tcpConnecting
2013-12-16T21:28:57.161Z,1387229337.161 [DataOverHttps](INFO): sslConnect
2013-12-16T21:28:57.162Z,1387229337.162 [DataOverHttps](INFO): sslConnecting
2013-12-16T21:28:57.183Z,1387229337.183 [DVL_micro](INFO): NQ1 requested
2013-12-16T21:28:57.183Z,1387229337.183 [DVL_micro](INFO): Cycling power to configure device.
2013-12-16T21:28:57.507Z,1387229337.507 [DAT](INFO): Init failed - response: 
2013-12-16T21:28:57.507Z,1387229337.507 [DAT](FAULT): DAT failed to initialize
2013-12-16T21:28:57.507Z,1387229337.507 [DAT] Communications Fault, FailCount= 2
2013-12-16T21:28:57.507Z,1387229337.507 [DAT](ERROR): Communications Fault
2013-12-16T21:28:57.522Z,1387229337.522 [Default:CallIridium:B](INFO): Completed Default:CallIridium:B
2013-12-16T21:28:57.522Z,1387229337.522 [Default:CallIridium:B] Stopped
2013-12-16T21:28:57.522Z,1387229337.522 [Default:CallIridium:B](INFO): Aggregate::uninitialize Default:CallIridium:B
2013-12-16T21:28:57.523Z,1387229337.523 [Default:CallIridium](INFO): Completed Default:CallIridium
2013-12-16T21:28:57.523Z,1387229337.523 [Default:CallIridium] Stopped
2013-12-16T21:28:57.523Z,1387229337.523 [Default:CallIridium](INFO): Aggregate::uninitialize Default:CallIridium
2013-12-16T21:28:57.532Z,1387229337.532 [CBIT](ERROR): Communications Fault in component: DAT
2013-12-16T21:28:57.545Z,1387229337.545 [DataOverHttps](INFO): sslConnecting
2013-12-16T21:28:58.072Z,1387229338.072 [DAT](INFO): Powering down
2013-12-16T21:28:58.221Z,1387229338.221 [CBIT](INFO): Clearing failed state for component NAL9602
2013-12-16T21:28:58.221Z,1387229338.221 [NAL9602] No Fault, FailCount= 1
2013-12-16T21:28:58.238Z,1387229338.238 [DataOverHttps](INFO): sslConnecting
2013-12-16T21:28:58.240Z,1387229338.240 [DataOverHttps](INFO): dataWrite
2013-12-16T21:28:58.240Z,1387229338.240 [DataOverHttps](INFO): dataWriting
2013-12-16T21:28:58.241Z,1387229338.241 [DataOverHttps](INFO): Wrote 206 bytes.
2013-12-16T21:28:58.636Z,1387229338.636 [DataOverHttps](INFO): dataRead
2013-12-16T21:28:58.642Z,1387229338.642 [NAL9602](INFO): Powering up NAL9602
2013-12-16T21:28:58.666Z,1387229338.666 [CBIT](INFO): Clearing failed state for component DAT
2013-12-16T21:28:58.666Z,1387229338.666 [DAT] No Fault, FailCount= 2
2013-12-16T21:28:59.037Z,1387229339.037 [DataOverHttps](INFO): dataRead
2013-12-16T21:28:59.037Z,1387229339.037 [DataOverHttps](INFO): disconnect
2013-12-16T21:28:59.070Z,1387229339.070 [CBIT](CRITICAL): Environmental Failure. Press:14.982194 PSI. Humidity:10%. Temp:21 C. ABORTING MISSION
2013-12-16T21:28:59.186Z,1387229339.186 [DVL_micro](INFO): Opening uart, block timeout 10ths=20
2013-12-16T21:28:59.186Z,1387229339.186 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD1616 00 0

2013-12-16T21:29:01.193Z,1387229341.193 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:29:01.193Z,1387229341.193 [DVL_micro](INFO): Enabling NQ1 output
2013-12-16T21:29:01.193Z,1387229341.193 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD0505 01 1

2013-12-16T21:29:01.453Z,1387229341.453 [DAT](INFO): Powering up
2013-12-16T21:29:01.453Z,1387229341.453 [DAT](DEBUG): Initializing DAT.
2013-12-16T21:29:03.196Z,1387229343.196 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:29:03.196Z,1387229343.196 [DVL_micro](INFO): Querying output modes
2013-12-16T21:29:03.196Z,1387229343.196 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD0606

2013-12-16T21:29:05.199Z,1387229345.199 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:29:05.199Z,1387229345.199 [DVL_micro](INFO): Output Modes: No Response
2013-12-16T21:29:05.199Z,1387229345.199 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD2525

2013-12-16T21:29:07.202Z,1387229347.202 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:29:09.210Z,1387229349.210 [DVL_micro](INFO): NQ1 requested
2013-12-16T21:29:09.210Z,1387229349.210 [DVL_micro](INFO): Cycling power to configure device.
2013-12-16T21:29:11.213Z,1387229351.213 [DVL_micro](INFO): Opening uart, block timeout 10ths=20
2013-12-16T21:29:11.213Z,1387229351.213 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD1616 00 0

2013-12-16T21:29:11.465Z,1387229351.465 [NAL9602](ERROR): NAL9602 initialize uart error: serial timeout
2013-12-16T21:29:11.465Z,1387229351.465 [NAL9602] Communications Fault, FailCount= 2
2013-12-16T21:29:11.465Z,1387229351.465 [NAL9602](ERROR): Communications Fault
2013-12-16T21:29:11.517Z,1387229351.517 [CBIT](ERROR): Communications Fault in component: NAL9602
2013-12-16T21:29:11.518Z,1387229351.518 [CBIT](CRITICAL): Communications Fault in component: NAL9602
2013-12-16T21:29:11.577Z,1387229351.577 [NAL9602](INFO): Powering down
2013-12-16T21:29:13.215Z,1387229353.215 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:29:13.215Z,1387229353.215 [DVL_micro](INFO): Enabling NQ1 output
2013-12-16T21:29:13.216Z,1387229353.216 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD0505 01 1

2013-12-16T21:29:15.219Z,1387229355.219 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:29:15.219Z,1387229355.219 [DVL_micro](INFO): Querying output modes
2013-12-16T21:29:15.219Z,1387229355.219 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD0606

2013-12-16T21:29:17.222Z,1387229357.222 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:29:17.222Z,1387229357.222 [DVL_micro](INFO): Output Modes: No Response
2013-12-16T21:29:17.222Z,1387229357.222 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD2525

2013-12-16T21:29:19.233Z,1387229359.233 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:29:21.051Z,1387229361.051 [DAT](INFO): Init failed - response: 
2013-12-16T21:29:21.052Z,1387229361.052 [DAT](FAULT): DAT failed to initialize
2013-12-16T21:29:21.052Z,1387229361.052 [DAT] Communications Fault, FailCount= 3
2013-12-16T21:29:21.052Z,1387229361.052 [DAT](ERROR): Communications Fault
2013-12-16T21:29:21.078Z,1387229361.078 [CBIT](ERROR): Communications Fault in component: DAT
2013-12-16T21:29:21.079Z,1387229361.079 [CBIT](CRITICAL): Communications Fault in component: DAT
2013-12-16T21:29:21.147Z,1387229361.147 [DAT](INFO): Powering down
2013-12-16T21:29:21.237Z,1387229361.237 [DVL_micro](INFO): NQ1 requested
2013-12-16T21:29:21.237Z,1387229361.237 [DVL_micro](INFO): Cycling power to configure device.
2013-12-16T21:29:22.774Z,1387229362.774 [CBIT](CRITICAL): Environmental Failure. Press:14.451184 PSI. Humidity:10%. Temp:21 C. ABORTING MISSION
2013-12-16T21:29:23.247Z,1387229363.247 [DVL_micro](INFO): Opening uart, block timeout 10ths=20
2013-12-16T21:29:23.248Z,1387229363.248 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD1616 00 0

2013-12-16T21:29:23.539Z,1387229363.539 [DataOverHttps](INFO): tcpConnect
2013-12-16T21:29:23.939Z,1387229363.939 [DataOverHttps](INFO): tcpConnecting
2013-12-16T21:29:23.939Z,1387229363.939 [DataOverHttps](INFO): sslConnect
2013-12-16T21:29:23.941Z,1387229363.941 [DataOverHttps](INFO): sslConnecting
2013-12-16T21:29:24.340Z,1387229364.340 [DataOverHttps](INFO): sslConnecting
2013-12-16T21:29:24.854Z,1387229364.854 [DataOverHttps](INFO): sslConnecting
2013-12-16T21:29:24.856Z,1387229364.856 [DataOverHttps](INFO): dataWrite
2013-12-16T21:29:24.856Z,1387229364.856 [DataOverHttps](INFO): dataWriting
2013-12-16T21:29:24.857Z,1387229364.857 [DataOverHttps](INFO): Wrote 206 bytes.
2013-12-16T21:29:25.257Z,1387229365.257 [DataOverHttps](INFO): dataRead
2013-12-16T21:29:25.266Z,1387229365.266 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:29:25.266Z,1387229365.266 [DVL_micro](INFO): Enabling NQ1 output
2013-12-16T21:29:25.266Z,1387229365.266 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD0505 01 1

2013-12-16T21:29:25.654Z,1387229365.654 [DataOverHttps](INFO): dataRead
2013-12-16T21:29:25.655Z,1387229365.655 [DataOverHttps](INFO): disconnect
2013-12-16T21:29:27.277Z,1387229367.277 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:29:27.277Z,1387229367.277 [DVL_micro](INFO): Querying output modes
2013-12-16T21:29:27.278Z,1387229367.278 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD0606

2013-12-16T21:29:29.288Z,1387229369.288 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:29:29.288Z,1387229369.288 [DVL_micro](INFO): Output Modes: No Response
2013-12-16T21:29:29.289Z,1387229369.289 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD2525

2013-12-16T21:29:31.295Z,1387229371.295 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:29:33.307Z,1387229373.307 [DVL_micro](INFO): NQ1 requested
2013-12-16T21:29:33.307Z,1387229373.307 [DVL_micro](INFO): Cycling power to configure device.
2013-12-16T21:29:35.310Z,1387229375.310 [DVL_micro](INFO): Opening uart, block timeout 10ths=20
2013-12-16T21:29:35.311Z,1387229375.311 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD1616 00 0

2013-12-16T21:29:37.321Z,1387229377.321 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:29:37.321Z,1387229377.321 [DVL_micro](INFO): Enabling NQ1 output
2013-12-16T21:29:37.321Z,1387229377.321 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD0505 01 1

2013-12-16T21:29:39.332Z,1387229379.332 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:29:39.332Z,1387229379.332 [DVL_micro](INFO): Querying output modes
2013-12-16T21:29:39.332Z,1387229379.332 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD0606

2013-12-16T21:29:41.335Z,1387229381.335 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:29:41.335Z,1387229381.335 [DVL_micro](INFO): Output Modes: No Response
2013-12-16T21:29:41.335Z,1387229381.335 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD2525

2013-12-16T21:29:43.342Z,1387229383.342 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:29:45.346Z,1387229385.346 [DVL_micro](INFO): NQ1 requested
2013-12-16T21:29:45.346Z,1387229385.346 [DVL_micro](INFO): Cycling power to configure device.
2013-12-16T21:29:47.349Z,1387229387.349 [DVL_micro](INFO): Opening uart, block timeout 10ths=20
2013-12-16T21:29:47.349Z,1387229387.349 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD1616 00 0

2013-12-16T21:29:49.356Z,1387229389.356 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:29:49.356Z,1387229389.356 [DVL_micro](INFO): Enabling NQ1 output
2013-12-16T21:29:49.356Z,1387229389.356 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD0505 01 1

2013-12-16T21:29:51.366Z,1387229391.366 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:29:51.367Z,1387229391.367 [DVL_micro](INFO): Querying output modes
2013-12-16T21:29:51.367Z,1387229391.367 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD0606

2013-12-16T21:29:53.370Z,1387229393.370 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:29:53.370Z,1387229393.370 [DVL_micro](INFO): Output Modes: No Response
2013-12-16T21:29:53.370Z,1387229393.370 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD2525

2013-12-16T21:29:53.658Z,1387229393.658 [DataOverHttps](INFO): tcpConnect
2013-12-16T21:29:54.054Z,1387229394.054 [DataOverHttps](INFO): tcpConnecting
2013-12-16T21:29:54.054Z,1387229394.054 [DataOverHttps](INFO): sslConnect
2013-12-16T21:29:54.056Z,1387229394.056 [DataOverHttps](INFO): sslConnecting
2013-12-16T21:29:54.455Z,1387229394.455 [DataOverHttps](INFO): sslConnecting
2013-12-16T21:29:54.963Z,1387229394.963 [DataOverHttps](INFO): sslConnecting
2013-12-16T21:29:54.965Z,1387229394.965 [DataOverHttps](INFO): dataWrite
2013-12-16T21:29:54.966Z,1387229394.966 [DataOverHttps](INFO): dataWriting
2013-12-16T21:29:54.967Z,1387229394.967 [DataOverHttps](INFO): Wrote 206 bytes.
2013-12-16T21:29:55.364Z,1387229395.364 [DataOverHttps](INFO): dataRead
2013-12-16T21:29:55.373Z,1387229395.373 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:29:55.765Z,1387229395.765 [DataOverHttps](INFO): dataRead
2013-12-16T21:29:55.766Z,1387229395.766 [DataOverHttps](INFO): disconnect
2013-12-16T21:29:57.384Z,1387229397.384 [DVL_micro](INFO): NQ1 requested
2013-12-16T21:29:57.385Z,1387229397.385 [DVL_micro](INFO): Cycling power to configure device.
2013-12-16T21:29:59.387Z,1387229399.387 [DVL_micro](INFO): Opening uart, block timeout 10ths=20
2013-12-16T21:29:59.388Z,1387229399.388 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD1616 00 0

2013-12-16T21:30:01.394Z,1387229401.394 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:30:01.394Z,1387229401.394 [DVL_micro](INFO): Enabling NQ1 output
2013-12-16T21:30:01.394Z,1387229401.394 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD0505 01 1

2013-12-16T21:30:03.397Z,1387229403.397 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:30:03.397Z,1387229403.397 [DVL_micro](INFO): Querying output modes
2013-12-16T21:30:03.397Z,1387229403.397 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD0606

2013-12-16T21:30:05.400Z,1387229405.400 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:30:05.400Z,1387229405.400 [DVL_micro](INFO): Output Modes: No Response
2013-12-16T21:30:05.401Z,1387229405.401 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD2525

2013-12-16T21:30:07.410Z,1387229407.410 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:30:09.423Z,1387229409.423 [DVL_micro](INFO): NQ1 requested
2013-12-16T21:30:09.423Z,1387229409.423 [DVL_micro](INFO): Cycling power to configure device.
2013-12-16T21:30:11.426Z,1387229411.426 [DVL_micro](INFO): Opening uart, block timeout 10ths=20
2013-12-16T21:30:11.426Z,1387229411.426 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD1616 00 0

2013-12-16T21:30:13.433Z,1387229413.433 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:30:13.433Z,1387229413.433 [DVL_micro](INFO): Enabling NQ1 output
2013-12-16T21:30:13.433Z,1387229413.433 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD0505 01 1

2013-12-16T21:30:15.444Z,1387229415.444 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:30:15.444Z,1387229415.444 [DVL_micro](INFO): Querying output modes
2013-12-16T21:30:15.444Z,1387229415.444 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD0606

2013-12-16T21:30:17.447Z,1387229417.447 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:30:17.447Z,1387229417.447 [DVL_micro](INFO): Output Modes: No Response
2013-12-16T21:30:17.447Z,1387229417.447 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD2525

2013-12-16T21:30:19.458Z,1387229419.458 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:30:21.470Z,1387229421.470 [DVL_micro](INFO): NQ1 requested
2013-12-16T21:30:21.470Z,1387229421.470 [DVL_micro](INFO): Cycling power to configure device.
2013-12-16T21:30:23.473Z,1387229423.473 [DVL_micro](INFO): Opening uart, block timeout 10ths=20
2013-12-16T21:30:23.473Z,1387229423.473 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD1616 00 0

2013-12-16T21:30:23.764Z,1387229423.764 [DataOverHttps](INFO): tcpConnect
2013-12-16T21:30:24.165Z,1387229424.165 [DataOverHttps](INFO): tcpConnecting
2013-12-16T21:30:24.165Z,1387229424.165 [DataOverHttps](INFO): sslConnect
2013-12-16T21:30:24.167Z,1387229424.167 [DataOverHttps](INFO): sslConnecting
2013-12-16T21:30:24.565Z,1387229424.565 [DataOverHttps](INFO): sslConnecting
2013-12-16T21:30:25.086Z,1387229425.086 [DataOverHttps](INFO): sslConnecting
2013-12-16T21:30:25.127Z,1387229425.127 [DataOverHttps](INFO): dataWrite
2013-12-16T21:30:25.127Z,1387229425.127 [DataOverHttps](INFO): dataWriting
2013-12-16T21:30:25.128Z,1387229425.128 [DataOverHttps](INFO): Wrote 206 bytes.
2013-12-16T21:30:25.487Z,1387229425.487 [DataOverHttps](INFO): dataRead
2013-12-16T21:30:25.492Z,1387229425.492 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:30:25.492Z,1387229425.492 [DVL_micro](INFO): Enabling NQ1 output
2013-12-16T21:30:25.492Z,1387229425.492 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD0505 01 1

2013-12-16T21:30:25.888Z,1387229425.888 [DataOverHttps](INFO): dataRead
2013-12-16T21:30:25.896Z,1387229425.896 [DataOverHttps](INFO): disconnect
2013-12-16T21:30:27.502Z,1387229427.502 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:30:27.503Z,1387229427.503 [DVL_micro](INFO): Querying output modes
2013-12-16T21:30:27.503Z,1387229427.503 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD0606

2013-12-16T21:30:29.506Z,1387229429.506 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:30:29.506Z,1387229429.506 [DVL_micro](INFO): Output Modes: No Response
2013-12-16T21:30:29.506Z,1387229429.506 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD2525

2013-12-16T21:30:31.517Z,1387229431.517 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:30:33.521Z,1387229433.521 [DVL_micro](INFO): NQ1 requested
2013-12-16T21:30:33.521Z,1387229433.521 [DVL_micro](INFO): Cycling power to configure device.
2013-12-16T21:30:35.523Z,1387229435.523 [DVL_micro](INFO): Opening uart, block timeout 10ths=20
2013-12-16T21:30:35.524Z,1387229435.524 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD1616 00 0

2013-12-16T21:30:37.526Z,1387229437.526 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:30:37.526Z,1387229437.526 [DVL_micro](INFO): Enabling NQ1 output
2013-12-16T21:30:37.526Z,1387229437.526 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD0505 01 1

2013-12-16T21:30:39.537Z,1387229439.537 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:30:39.537Z,1387229439.537 [DVL_micro](INFO): Querying output modes
2013-12-16T21:30:39.538Z,1387229439.538 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD0606

2013-12-16T21:30:41.544Z,1387229441.544 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:30:41.544Z,1387229441.544 [DVL_micro](INFO): Output Modes: No Response
2013-12-16T21:30:41.545Z,1387229441.545 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD2525

2013-12-16T21:30:43.551Z,1387229443.551 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:30:45.559Z,1387229445.559 [DVL_micro](INFO): NQ1 requested
2013-12-16T21:30:45.559Z,1387229445.559 [DVL_micro](INFO): Cycling power to configure device.
2013-12-16T21:30:47.562Z,1387229447.562 [DVL_micro](INFO): Opening uart, block timeout 10ths=20
2013-12-16T21:30:47.562Z,1387229447.562 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD1616 00 0

2013-12-16T21:30:49.565Z,1387229449.565 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:30:49.565Z,1387229449.565 [DVL_micro](INFO): Enabling NQ1 output
2013-12-16T21:30:49.565Z,1387229449.565 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD0505 01 1

2013-12-16T21:30:51.572Z,1387229451.572 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:30:51.572Z,1387229451.572 [DVL_micro](INFO): Querying output modes
2013-12-16T21:30:51.572Z,1387229451.572 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD0606

2013-12-16T21:30:53.583Z,1387229453.583 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:30:53.583Z,1387229453.583 [DVL_micro](INFO): Output Modes: No Response
2013-12-16T21:30:53.583Z,1387229453.583 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD2525

2013-12-16T21:30:53.887Z,1387229453.887 [DataOverHttps](INFO): tcpConnect
2013-12-16T21:30:54.287Z,1387229454.287 [DataOverHttps](INFO): tcpConnecting
2013-12-16T21:30:54.288Z,1387229454.288 [DataOverHttps](INFO): sslConnect
2013-12-16T21:30:54.290Z,1387229454.290 [DataOverHttps](INFO): sslConnecting
2013-12-16T21:30:54.684Z,1387229454.684 [DataOverHttps](INFO): sslConnecting
2013-12-16T21:30:55.231Z,1387229455.231 [DataOverHttps](INFO): sslConnecting
2013-12-16T21:30:55.233Z,1387229455.233 [DataOverHttps](INFO): dataWrite
2013-12-16T21:30:55.234Z,1387229455.234 [DataOverHttps](INFO): dataWriting
2013-12-16T21:30:55.235Z,1387229455.235 [DataOverHttps](INFO): Wrote 206 bytes.
2013-12-16T21:30:55.594Z,1387229455.594 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:30:55.634Z,1387229455.634 [DataOverHttps](INFO): dataRead
2013-12-16T21:30:56.034Z,1387229456.034 [DataOverHttps](INFO): dataRead
2013-12-16T21:30:56.035Z,1387229456.035 [DataOverHttps](INFO): disconnect
2013-12-16T21:30:57.602Z,1387229457.602 [DVL_micro](INFO): NQ1 requested
2013-12-16T21:30:57.602Z,1387229457.602 [DVL_micro](INFO): Cycling power to configure device.
2013-12-16T21:30:59.605Z,1387229459.605 [DVL_micro](INFO): Opening uart, block timeout 10ths=20
2013-12-16T21:30:59.605Z,1387229459.605 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD1616 00 0

2013-12-16T21:31:01.607Z,1387229461.607 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:31:01.607Z,1387229461.607 [DVL_micro](INFO): Enabling NQ1 output
2013-12-16T21:31:01.608Z,1387229461.608 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD0505 01 1

2013-12-16T21:31:03.614Z,1387229463.614 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:31:03.615Z,1387229463.615 [DVL_micro](INFO): Querying output modes
2013-12-16T21:31:03.615Z,1387229463.615 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD0606

2013-12-16T21:31:05.638Z,1387229465.638 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:31:05.638Z,1387229465.638 [DVL_micro](INFO): Output Modes: No Response
2013-12-16T21:31:05.638Z,1387229465.638 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD2525

2013-12-16T21:31:07.649Z,1387229467.649 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:31:09.661Z,1387229469.661 [DVL_micro](INFO): NQ1 requested
2013-12-16T21:31:09.661Z,1387229469.661 [DVL_micro](INFO): Cycling power to configure device.
2013-12-16T21:31:11.663Z,1387229471.663 [DVL_micro](INFO): Opening uart, block timeout 10ths=20
2013-12-16T21:31:11.664Z,1387229471.664 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD1616 00 0

2013-12-16T21:31:11.668Z,1387229471.668 [CBIT](INFO): Clearing failed count for component NAL9602
2013-12-16T21:31:11.668Z,1387229471.668 [NAL9602] No Fault, FailCount= 2
2013-12-16T21:31:12.034Z,1387229472.034 [NAL9602](INFO): Powering up NAL9602
2013-12-16T21:31:13.674Z,1387229473.674 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:31:13.674Z,1387229473.674 [DVL_micro](INFO): Enabling NQ1 output
2013-12-16T21:31:13.674Z,1387229473.674 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD0505 01 1

2013-12-16T21:31:15.681Z,1387229475.681 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:31:15.681Z,1387229475.681 [DVL_micro](INFO): Querying output modes
2013-12-16T21:31:15.681Z,1387229475.681 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD0606

2013-12-16T21:31:17.704Z,1387229477.704 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:31:17.705Z,1387229477.705 [DVL_micro](INFO): Output Modes: No Response
2013-12-16T21:31:17.705Z,1387229477.705 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD2525

2013-12-16T21:31:19.708Z,1387229479.708 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:31:20.458Z,1387229480.458 [CBIT](CRITICAL): Environmental Failure. Press:14.982194 PSI. Humidity:10%. Temp:21 C. ABORTING MISSION
2013-12-16T21:31:21.719Z,1387229481.719 [DVL_micro](INFO): NQ1 requested
2013-12-16T21:31:21.719Z,1387229481.719 [DVL_micro](INFO): Cycling power to configure device.
2013-12-16T21:31:23.722Z,1387229483.722 [DVL_micro](INFO): Opening uart, block timeout 10ths=20
2013-12-16T21:31:23.722Z,1387229483.722 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD1616 00 0

2013-12-16T21:31:24.455Z,1387229484.455 [NAL9602](ERROR): NAL9602 initialize uart error: serial timeout
2013-12-16T21:31:24.455Z,1387229484.455 [NAL9602] Communications Fault, FailCount= 1
2013-12-16T21:31:24.455Z,1387229484.455 [NAL9602](ERROR): Communications Fault
2013-12-16T21:31:24.483Z,1387229484.483 [CBIT](ERROR): Communications Fault in component: NAL9602
2013-12-16T21:31:24.561Z,1387229484.561 [DataOverHttps](INFO): tcpConnect
2013-12-16T21:31:24.564Z,1387229484.564 [NAL9602](INFO): Powering down
2013-12-16T21:31:24.900Z,1387229484.900 [DataOverHttps](INFO): tcpConnecting
2013-12-16T21:31:24.901Z,1387229484.901 [DataOverHttps](INFO): sslConnect
2013-12-16T21:31:24.902Z,1387229484.902 [DataOverHttps](INFO): sslConnecting
2013-12-16T21:31:25.301Z,1387229485.301 [DataOverHttps](INFO): sslConnecting
2013-12-16T21:31:25.733Z,1387229485.733 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:31:25.733Z,1387229485.733 [DVL_micro](INFO): Enabling NQ1 output
2013-12-16T21:31:25.733Z,1387229485.733 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD0505 01 1

2013-12-16T21:31:25.821Z,1387229485.821 [CBIT](INFO): Clearing failed state for component NAL9602
2013-12-16T21:31:25.821Z,1387229485.821 [NAL9602] No Fault, FailCount= 1
2013-12-16T21:31:25.835Z,1387229485.835 [DataOverHttps](INFO): sslConnecting
2013-12-16T21:31:25.837Z,1387229485.837 [DataOverHttps](INFO): dataWrite
2013-12-16T21:31:25.837Z,1387229485.837 [DataOverHttps](INFO): dataWriting
2013-12-16T21:31:25.839Z,1387229485.839 [DataOverHttps](INFO): Wrote 206 bytes.
2013-12-16T21:31:26.237Z,1387229486.237 [DataOverHttps](INFO): dataRead
2013-12-16T21:31:26.638Z,1387229486.638 [DataOverHttps](INFO): dataRead
2013-12-16T21:31:26.638Z,1387229486.638 [DataOverHttps](INFO): disconnect
2013-12-16T21:31:27.744Z,1387229487.744 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:31:27.744Z,1387229487.744 [DVL_micro](INFO): Querying output modes
2013-12-16T21:31:27.744Z,1387229487.744 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD0606

2013-12-16T21:31:29.747Z,1387229489.747 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:31:29.747Z,1387229489.747 [DVL_micro](INFO): Output Modes: No Response
2013-12-16T21:31:29.747Z,1387229489.747 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD2525

2013-12-16T21:31:29.845Z,1387229489.845 [NAL9602](INFO): Powering up NAL9602
2013-12-16T21:31:31.758Z,1387229491.758 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:31:33.762Z,1387229493.762 [DVL_micro](INFO): NQ1 requested
2013-12-16T21:31:33.762Z,1387229493.762 [DVL_micro](INFO): Cycling power to configure device.
2013-12-16T21:31:35.765Z,1387229495.765 [DVL_micro](INFO): Opening uart, block timeout 10ths=20
2013-12-16T21:31:35.765Z,1387229495.765 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD1616 00 0

2013-12-16T21:31:37.767Z,1387229497.767 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:31:37.767Z,1387229497.767 [DVL_micro](INFO): Enabling NQ1 output
2013-12-16T21:31:37.768Z,1387229497.768 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD0505 01 1

2013-12-16T21:31:39.779Z,1387229499.779 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:31:39.779Z,1387229499.779 [DVL_micro](INFO): Querying output modes
2013-12-16T21:31:39.779Z,1387229499.779 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD0606

2013-12-16T21:31:41.790Z,1387229501.790 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:31:41.790Z,1387229501.790 [DVL_micro](INFO): Output Modes: No Response
2013-12-16T21:31:41.790Z,1387229501.790 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD2525

2013-12-16T21:31:42.667Z,1387229502.667 [NAL9602](ERROR): NAL9602 initialize uart error: serial timeout
2013-12-16T21:31:42.667Z,1387229502.667 [NAL9602] Communications Fault, FailCount= 2
2013-12-16T21:31:42.667Z,1387229502.667 [NAL9602](ERROR): Communications Fault
2013-12-16T21:31:42.716Z,1387229502.716 [CBIT](ERROR): Communications Fault in component: NAL9602
2013-12-16T21:31:42.717Z,1387229502.717 [CBIT](CRITICAL): Communications Fault in component: NAL9602
2013-12-16T21:31:42.772Z,1387229502.772 [NAL9602](INFO): Powering down
2013-12-16T21:31:43.793Z,1387229503.793 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:31:44.764Z,1387229504.764 [CBIT](INFO): Clearing failed count for component AHRS_sp3003D
2013-12-16T21:31:44.764Z,1387229504.764 [AHRS_sp3003D] No Fault, FailCount= 5
2013-12-16T21:31:45.134Z,1387229505.134 [AHRS_sp3003D](DEBUG): Initializing AHRS_sp3003D.
2013-12-16T21:31:45.797Z,1387229505.797 [DVL_micro](INFO): pause:Powering down
2013-12-16T21:31:46.273Z,1387229506.273 [AHRS_sp3003D](ERROR): readHeadingMagBin UART error: serial timeout
2013-12-16T21:31:46.273Z,1387229506.273 [AHRS_sp3003D](ERROR): SP3003D failed to initialize
2013-12-16T21:31:46.273Z,1387229506.273 [AHRS_sp3003D] Hardware Fault, FailCount= 1
2013-12-16T21:31:46.273Z,1387229506.273 [AHRS_sp3003D](ERROR): Hardware Fault
2013-12-16T21:31:46.324Z,1387229506.324 [CBIT](ERROR): Hardware Fault in component: AHRS_sp3003D
2013-12-16T21:31:46.338Z,1387229506.338 [AHRS_sp3003D](INFO): Powering down
2013-12-16T21:31:46.601Z,1387229506.601 [DVL_micro](INFO): NQ1 requested
2013-12-16T21:31:46.602Z,1387229506.602 [DVL_micro](INFO): Opening uart, block timeout 10ths=20
2013-12-16T21:31:46.602Z,1387229506.602 [DVL_micro](INFO): resume:Powering up
2013-12-16T21:31:46.603Z,1387229506.603 [DVL_micro](INFO): Cycling power to configure device.
2013-12-16T21:31:47.563Z,1387229507.563 [CBIT](INFO): Clearing failed state for component AHRS_sp3003D
2013-12-16T21:31:47.563Z,1387229507.563 [AHRS_sp3003D] No Fault, FailCount= 1
2013-12-16T21:31:47.939Z,1387229507.939 [AHRS_sp3003D](DEBUG): Initializing AHRS_sp3003D.
2013-12-16T21:31:48.608Z,1387229508.608 [DVL_micro](INFO): Opening uart, block timeout 10ths=20
2013-12-16T21:31:48.609Z,1387229508.609 [DVL_micro](INFO): Querying output modes
2013-12-16T21:31:48.609Z,1387229508.609 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD0606

2013-12-16T21:31:49.091Z,1387229509.091 [AHRS_sp3003D](ERROR): readHeadingMagBin UART error: serial timeout
2013-12-16T21:31:49.091Z,1387229509.091 [AHRS_sp3003D](ERROR): SP3003D failed to initialize
2013-12-16T21:31:49.091Z,1387229509.091 [AHRS_sp3003D] Hardware Fault, FailCount= 2
2013-12-16T21:31:49.091Z,1387229509.091 [AHRS_sp3003D](ERROR): Hardware Fault
2013-12-16T21:31:49.117Z,1387229509.117 [CBIT](ERROR): Hardware Fault in component: AHRS_sp3003D
2013-12-16T21:31:49.141Z,1387229509.141 [AHRS_sp3003D](INFO): Powering down
2013-12-16T21:31:50.363Z,1387229510.363 [CBIT](INFO): Clearing failed state for component AHRS_sp3003D
2013-12-16T21:31:50.363Z,1387229510.363 [AHRS_sp3003D] No Fault, FailCount= 2
2013-12-16T21:31:50.615Z,1387229510.615 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:31:50.615Z,1387229510.615 [DVL_micro](INFO): Output Modes: No Response
2013-12-16T21:31:50.616Z,1387229510.616 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD2525

2013-12-16T21:31:50.739Z,1387229510.739 [AHRS_sp3003D](DEBUG): Initializing AHRS_sp3003D.
2013-12-16T21:31:51.873Z,1387229511.873 [AHRS_sp3003D](ERROR): readHeadingMagBin UART error: serial timeout
2013-12-16T21:31:51.873Z,1387229511.873 [AHRS_sp3003D](ERROR): SP3003D failed to initialize
2013-12-16T21:31:51.874Z,1387229511.874 [AHRS_sp3003D] Hardware Fault, FailCount= 3
2013-12-16T21:31:51.874Z,1387229511.874 [AHRS_sp3003D](ERROR): Hardware Fault
2013-12-16T21:31:51.940Z,1387229511.940 [CBIT](ERROR): Hardware Fault in component: AHRS_sp3003D
2013-12-16T21:31:51.954Z,1387229511.954 [AHRS_sp3003D](INFO): Powering down
2013-12-16T21:31:52.626Z,1387229512.626 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:31:52.628Z,1387229512.628 [DVL_micro](INFO): NQ1 requested
2013-12-16T21:31:52.628Z,1387229512.628 [DVL_micro](INFO): Cycling power to configure device.
2013-12-16T21:31:53.187Z,1387229513.187 [CBIT](INFO): Clearing failed state for component AHRS_sp3003D
2013-12-16T21:31:53.187Z,1387229513.187 [AHRS_sp3003D] No Fault, FailCount= 3
2013-12-16T21:31:53.555Z,1387229513.555 [AHRS_sp3003D](DEBUG): Initializing AHRS_sp3003D.
2013-12-16T21:31:54.634Z,1387229514.634 [DVL_micro](INFO): Opening uart, block timeout 10ths=20
2013-12-16T21:31:54.634Z,1387229514.634 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD1616 00 0

2013-12-16T21:31:54.702Z,1387229514.702 [AHRS_sp3003D](ERROR): readHeadingMagBin UART error: serial timeout
2013-12-16T21:31:54.702Z,1387229514.702 [AHRS_sp3003D](ERROR): SP3003D failed to initialize
2013-12-16T21:31:54.702Z,1387229514.702 [AHRS_sp3003D] Hardware Fault, FailCount= 4
2013-12-16T21:31:54.702Z,1387229514.702 [AHRS_sp3003D](ERROR): Hardware Fault
2013-12-16T21:31:54.703Z,1387229514.703 [DataOverHttps](INFO): tcpConnect
2013-12-16T21:31:54.735Z,1387229514.735 [CBIT](ERROR): Hardware Fault in component: AHRS_sp3003D
2013-12-16T21:31:54.758Z,1387229514.758 [AHRS_sp3003D](INFO): Powering down
2013-12-16T21:31:54.847Z,1387229514.847 [DataOverHttps](INFO): tcpConnecting
2013-12-16T21:31:54.847Z,1387229514.847 [DataOverHttps](INFO): sslConnect
2013-12-16T21:31:54.848Z,1387229514.848 [DataOverHttps](INFO): sslConnecting
2013-12-16T21:31:55.158Z,1387229515.158 [DataOverHttps](INFO): sslConnecting
2013-12-16T21:31:55.666Z,1387229515.666 [DataOverHttps](INFO): sslConnecting
2013-12-16T21:31:55.668Z,1387229515.668 [DataOverHttps](INFO): dataWrite
2013-12-16T21:31:55.668Z,1387229515.668 [DataOverHttps](INFO): dataWriting
2013-12-16T21:31:55.670Z,1387229515.670 [DataOverHttps](INFO): Wrote 206 bytes.
2013-12-16T21:31:56.068Z,1387229516.068 [DataOverHttps](INFO): dataRead
2013-12-16T21:31:56.125Z,1387229516.125 [CBIT](INFO): Clearing failed count for component MassServo
2013-12-16T21:31:56.125Z,1387229516.125 [MassServo] No Fault, FailCount= 5
2013-12-16T21:31:56.126Z,1387229516.126 [CBIT](INFO): Clearing failed state for component AHRS_sp3003D
2013-12-16T21:31:56.126Z,1387229516.126 [AHRS_sp3003D] No Fault, FailCount= 4
2013-12-16T21:31:56.468Z,1387229516.468 [AHRS_sp3003D](DEBUG): Initializing AHRS_sp3003D.
2013-12-16T21:31:56.470Z,1387229516.470 [DataOverHttps](INFO): dataRead
2013-12-16T21:31:56.470Z,1387229516.470 [DataOverHttps](INFO): disconnect
2013-12-16T21:31:56.645Z,1387229516.645 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:31:56.645Z,1387229516.645 [DVL_micro](INFO): Enabling NQ1 output
2013-12-16T21:31:56.645Z,1387229516.645 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD0505 01 1

2013-12-16T21:31:57.606Z,1387229517.606 [AHRS_sp3003D](ERROR): readHeadingMagBin UART error: serial timeout
2013-12-16T21:31:57.606Z,1387229517.606 [AHRS_sp3003D](ERROR): SP3003D failed to initialize
2013-12-16T21:31:57.607Z,1387229517.607 [AHRS_sp3003D] Hardware Fault, FailCount= 5
2013-12-16T21:31:57.607Z,1387229517.607 [AHRS_sp3003D](ERROR): Hardware Fault
2013-12-16T21:31:58.139Z,1387229518.139 [MassServo](FAULT): Mass shifter EEPROM initialization uart error serial timeout
2013-12-16T21:31:58.139Z,1387229518.139 [MassServo] Communications Fault, FailCount= 1
2013-12-16T21:31:58.139Z,1387229518.139 [MassServo](ERROR): Communications Fault
2013-12-16T21:31:58.142Z,1387229518.142 [CBIT](ERROR): Communications Fault in component: MassServo
2013-12-16T21:31:58.143Z,1387229518.143 [CBIT](ERROR): Hardware Fault in component: AHRS_sp3003D
2013-12-16T21:31:58.143Z,1387229518.143 [CBIT](CRITICAL): Hardware Fault in component: AHRS_sp3003D
2013-12-16T21:31:58.163Z,1387229518.163 [AHRS_sp3003D](INFO): Powering down
2013-12-16T21:31:58.276Z,1387229518.276 [MassServo](DEBUG): Uninitialize Mass Servo.
2013-12-16T21:31:58.276Z,1387229518.276 [MassServo](INFO): Powering down
2013-12-16T21:31:58.648Z,1387229518.648 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:31:58.648Z,1387229518.648 [DVL_micro](INFO): Querying output modes
2013-12-16T21:31:58.648Z,1387229518.648 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD0606

2013-12-16T21:31:58.982Z,1387229518.982 [MassServo](DEBUG): Initializing EZServoServo.
2013-12-16T21:31:59.101Z,1387229519.101 [MassServo](DEBUG): Initializing MassServo.
2013-12-16T21:31:59.105Z,1387229519.105 [CBIT](INFO): Clearing failed state for component MassServo
2013-12-16T21:31:59.105Z,1387229519.105 [MassServo] No Fault, FailCount= 1
2013-12-16T21:32:00.655Z,1387229520.655 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:32:00.655Z,1387229520.655 [DVL_micro](INFO): Output Modes: No Response
2013-12-16T21:32:00.655Z,1387229520.655 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD2525

2013-12-16T21:32:01.524Z,1387229521.524 [MassServo](FAULT): Mass shifter EEPROM initialization uart error serial timeout
2013-12-16T21:32:01.524Z,1387229521.524 [MassServo] Communications Fault, FailCount= 2
2013-12-16T21:32:01.524Z,1387229521.524 [MassServo](ERROR): Communications Fault
2013-12-16T21:32:01.528Z,1387229521.528 [CBIT](ERROR): Communications Fault in component: MassServo
2013-12-16T21:32:01.563Z,1387229521.563 [MassServo](DEBUG): Uninitialize Mass Servo.
2013-12-16T21:32:01.563Z,1387229521.563 [MassServo](INFO): Powering down
2013-12-16T21:32:02.370Z,1387229522.370 [MassServo](DEBUG): Initializing EZServoServo.
2013-12-16T21:32:02.491Z,1387229522.491 [MassServo](DEBUG): Initializing MassServo.
2013-12-16T21:32:02.494Z,1387229522.494 [CBIT](INFO): Clearing failed state for component MassServo
2013-12-16T21:32:02.494Z,1387229522.494 [MassServo] No Fault, FailCount= 2
2013-12-16T21:32:02.658Z,1387229522.658 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:32:04.666Z,1387229524.666 [DVL_micro](INFO): NQ1 requested
2013-12-16T21:32:04.666Z,1387229524.666 [DVL_micro](INFO): Cycling power to configure device.
2013-12-16T21:32:04.877Z,1387229524.877 [MassServo](FAULT): Mass shifter EEPROM initialization uart error serial timeout
2013-12-16T21:32:04.878Z,1387229524.878 [MassServo] Communications Fault, FailCount= 3
2013-12-16T21:32:04.878Z,1387229524.878 [MassServo](ERROR): Communications Fault
2013-12-16T21:32:04.881Z,1387229524.881 [CBIT](ERROR): Communications Fault in component: MassServo
2013-12-16T21:32:04.940Z,1387229524.940 [MassServo](DEBUG): Uninitialize Mass Servo.
2013-12-16T21:32:04.940Z,1387229524.940 [MassServo](INFO): Powering down
2013-12-16T21:32:05.732Z,1387229525.732 [MassServo](DEBUG): Initializing EZServoServo.
2013-12-16T21:32:05.848Z,1387229525.848 [MassServo](DEBUG): Initializing MassServo.
2013-12-16T21:32:05.851Z,1387229525.851 [CBIT](INFO): Clearing failed state for component MassServo
2013-12-16T21:32:05.851Z,1387229525.851 [MassServo] No Fault, FailCount= 3
2013-12-16T21:32:06.669Z,1387229526.669 [DVL_micro](INFO): Opening uart, block timeout 10ths=20
2013-12-16T21:32:06.669Z,1387229526.669 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD1616 00 0

2013-12-16T21:32:08.231Z,1387229528.231 [MassServo](FAULT): Mass shifter EEPROM initialization uart error serial timeout
2013-12-16T21:32:08.231Z,1387229528.231 [MassServo] Communications Fault, FailCount= 4
2013-12-16T21:32:08.231Z,1387229528.231 [MassServo](ERROR): Communications Fault
2013-12-16T21:32:08.234Z,1387229528.234 [CBIT](ERROR): Communications Fault in component: MassServo
2013-12-16T21:32:08.275Z,1387229528.275 [MassServo](DEBUG): Uninitialize Mass Servo.
2013-12-16T21:32:08.275Z,1387229528.275 [MassServo](INFO): Powering down
2013-12-16T21:32:08.679Z,1387229528.679 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:32:08.680Z,1387229528.680 [DVL_micro](INFO): Enabling NQ1 output
2013-12-16T21:32:08.680Z,1387229528.680 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD0505 01 1

2013-12-16T21:32:09.084Z,1387229529.084 [MassServo](DEBUG): Initializing EZServoServo.
2013-12-16T21:32:09.201Z,1387229529.201 [MassServo](DEBUG): Initializing MassServo.
2013-12-16T21:32:09.205Z,1387229529.205 [CBIT](INFO): Clearing failed state for component MassServo
2013-12-16T21:32:09.205Z,1387229529.205 [MassServo] No Fault, FailCount= 4
2013-12-16T21:32:10.698Z,1387229530.698 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:32:10.699Z,1387229530.699 [DVL_micro](INFO): Querying output modes
2013-12-16T21:32:10.699Z,1387229530.699 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD0606

2013-12-16T21:32:11.576Z,1387229531.576 [MassServo](FAULT): Mass shifter EEPROM initialization uart error serial timeout
2013-12-16T21:32:11.576Z,1387229531.576 [MassServo] Communications Fault, FailCount= 5
2013-12-16T21:32:11.576Z,1387229531.576 [MassServo](ERROR): Communications Fault
2013-12-16T21:32:11.579Z,1387229531.579 [CBIT](ERROR): Communications Fault in component: MassServo
2013-12-16T21:32:11.580Z,1387229531.580 [CBIT](CRITICAL): Communications Fault in component: MassServo
2013-12-16T21:32:11.646Z,1387229531.646 [MassServo](DEBUG): Uninitialize Mass Servo.
2013-12-16T21:32:11.646Z,1387229531.646 [MassServo](INFO): Powering down
2013-12-16T21:32:12.432Z,1387229532.432 [MassServo](DEBUG): Initializing EZServoServo.
2013-12-16T21:32:12.546Z,1387229532.546 [MassServo](DEBUG): Initializing MassServo.
2013-12-16T21:32:12.710Z,1387229532.710 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:32:12.710Z,1387229532.710 [DVL_micro](INFO): Output Modes: No Response
2013-12-16T21:32:12.710Z,1387229532.710 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD2525

2013-12-16T21:32:14.721Z,1387229534.721 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:32:16.724Z,1387229536.724 [DVL_micro](INFO): NQ1 requested
2013-12-16T21:32:16.724Z,1387229536.724 [DVL_micro](INFO): Cycling power to configure device.
2013-12-16T21:32:18.727Z,1387229538.727 [DVL_micro](INFO): Opening uart, block timeout 10ths=20
2013-12-16T21:32:18.728Z,1387229538.728 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD1616 00 0

2013-12-16T21:32:20.738Z,1387229540.738 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:32:20.738Z,1387229540.738 [DVL_micro](INFO): Enabling NQ1 output
2013-12-16T21:32:20.738Z,1387229540.738 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD0505 01 1

2013-12-16T21:32:22.749Z,1387229542.749 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:32:22.749Z,1387229542.749 [DVL_micro](INFO): Querying output modes
2013-12-16T21:32:22.749Z,1387229542.749 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD0606

2013-12-16T21:32:24.760Z,1387229544.760 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:32:24.760Z,1387229544.760 [DVL_micro](INFO): Output Modes: No Response
2013-12-16T21:32:24.761Z,1387229544.761 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD2525

2013-12-16T21:32:24.796Z,1387229544.796 [DataOverHttps](INFO): tcpConnect
2013-12-16T21:32:25.196Z,1387229545.196 [DataOverHttps](INFO): tcpConnecting
2013-12-16T21:32:25.197Z,1387229545.197 [DataOverHttps](INFO): sslConnect
2013-12-16T21:32:25.198Z,1387229545.198 [DataOverHttps](INFO): sslConnecting
2013-12-16T21:32:25.599Z,1387229545.599 [DataOverHttps](INFO): sslConnecting
2013-12-16T21:32:26.125Z,1387229546.125 [DataOverHttps](INFO): sslConnecting
2013-12-16T21:32:26.127Z,1387229546.127 [DataOverHttps](INFO): dataWrite
2013-12-16T21:32:26.128Z,1387229546.128 [DataOverHttps](INFO): dataWriting
2013-12-16T21:32:26.129Z,1387229546.129 [DataOverHttps](INFO): Wrote 206 bytes.
2013-12-16T21:32:26.526Z,1387229546.526 [DataOverHttps](INFO): dataRead
2013-12-16T21:32:26.772Z,1387229546.772 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:32:26.927Z,1387229546.927 [DataOverHttps](INFO): dataRead
2013-12-16T21:32:26.928Z,1387229546.928 [DataOverHttps](INFO): disconnect
2013-12-16T21:32:28.776Z,1387229548.776 [DVL_micro](INFO): NQ1 requested
2013-12-16T21:32:28.776Z,1387229548.776 [DVL_micro](INFO): Cycling power to configure device.
2013-12-16T21:32:30.778Z,1387229550.778 [DVL_micro](INFO): Opening uart, block timeout 10ths=20
2013-12-16T21:32:30.779Z,1387229550.779 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD1616 00 0

2013-12-16T21:32:32.785Z,1387229552.785 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:32:32.785Z,1387229552.785 [DVL_micro](INFO): Enabling NQ1 output
2013-12-16T21:32:32.785Z,1387229552.785 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD0505 01 1

2013-12-16T21:32:34.792Z,1387229554.792 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:32:34.792Z,1387229554.792 [DVL_micro](INFO): Querying output modes
2013-12-16T21:32:34.792Z,1387229554.792 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD0606

2013-12-16T21:32:36.795Z,1387229556.795 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:32:36.795Z,1387229556.795 [DVL_micro](INFO): Output Modes: No Response
2013-12-16T21:32:36.795Z,1387229556.795 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD2525

2013-12-16T21:32:38.798Z,1387229558.798 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:32:40.810Z,1387229560.810 [DVL_micro](INFO): NQ1 requested
2013-12-16T21:32:40.810Z,1387229560.810 [DVL_micro](INFO): Cycling power to configure device.
2013-12-16T21:32:42.813Z,1387229562.813 [DVL_micro](INFO): Opening uart, block timeout 10ths=20
2013-12-16T21:32:42.813Z,1387229562.813 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD1616 00 0

2013-12-16T21:32:44.820Z,1387229564.820 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:32:44.820Z,1387229564.820 [DVL_micro](INFO): Enabling NQ1 output
2013-12-16T21:32:44.820Z,1387229564.820 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD0505 01 1

2013-12-16T21:32:46.822Z,1387229566.822 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:32:46.823Z,1387229566.823 [DVL_micro](INFO): Querying output modes
2013-12-16T21:32:46.823Z,1387229566.823 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD0606

2013-12-16T21:32:48.830Z,1387229568.830 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:32:48.830Z,1387229568.830 [DVL_micro](INFO): Output Modes: No Response
2013-12-16T21:32:48.830Z,1387229568.830 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD2525

2013-12-16T21:32:50.841Z,1387229570.841 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:32:52.844Z,1387229572.844 [DVL_micro](INFO): NQ1 requested
2013-12-16T21:32:52.844Z,1387229572.844 [DVL_micro](INFO): Cycling power to configure device.
2013-12-16T21:32:54.847Z,1387229574.847 [DVL_micro](INFO): Opening uart, block timeout 10ths=20
2013-12-16T21:32:54.848Z,1387229574.848 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD1616 00 0

2013-12-16T21:32:54.927Z,1387229574.927 [DataOverHttps](INFO): tcpConnect
2013-12-16T21:32:55.327Z,1387229575.327 [DataOverHttps](INFO): tcpConnecting
2013-12-16T21:32:55.327Z,1387229575.327 [DataOverHttps](INFO): sslConnect
2013-12-16T21:32:55.329Z,1387229575.329 [DataOverHttps](INFO): sslConnecting
2013-12-16T21:32:55.728Z,1387229575.728 [DataOverHttps](INFO): sslConnecting
2013-12-16T21:32:56.241Z,1387229576.241 [DataOverHttps](INFO): sslConnecting
2013-12-16T21:32:56.243Z,1387229576.243 [DataOverHttps](INFO): dataWrite
2013-12-16T21:32:56.243Z,1387229576.243 [DataOverHttps](INFO): dataWriting
2013-12-16T21:32:56.245Z,1387229576.245 [DataOverHttps](INFO): Wrote 206 bytes.
2013-12-16T21:32:56.645Z,1387229576.645 [DataOverHttps](INFO): dataRead
2013-12-16T21:32:56.858Z,1387229576.858 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:32:56.858Z,1387229576.858 [DVL_micro](INFO): Enabling NQ1 output
2013-12-16T21:32:56.858Z,1387229576.858 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD0505 01 1

2013-12-16T21:32:57.042Z,1387229577.042 [DataOverHttps](INFO): dataRead
2013-12-16T21:32:57.043Z,1387229577.043 [DataOverHttps](INFO): disconnect
2013-12-16T21:32:58.865Z,1387229578.865 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:32:58.865Z,1387229578.865 [DVL_micro](INFO): Querying output modes
2013-12-16T21:32:58.865Z,1387229578.865 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD0606

2013-12-16T21:33:00.876Z,1387229580.876 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:33:00.876Z,1387229580.876 [DVL_micro](INFO): Output Modes: No Response
2013-12-16T21:33:00.877Z,1387229580.877 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD2525

2013-12-16T21:33:02.887Z,1387229582.887 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:33:04.899Z,1387229584.899 [DVL_micro](INFO): NQ1 requested
2013-12-16T21:33:04.899Z,1387229584.899 [DVL_micro](INFO): Cycling power to configure device.
2013-12-16T21:33:06.902Z,1387229586.902 [DVL_micro](INFO): Opening uart, block timeout 10ths=20
2013-12-16T21:33:06.902Z,1387229586.902 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD1616 00 0

2013-12-16T21:33:08.913Z,1387229588.913 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:33:08.913Z,1387229588.913 [DVL_micro](INFO): Enabling NQ1 output
2013-12-16T21:33:08.913Z,1387229588.913 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD0505 01 1

2013-12-16T21:33:10.924Z,1387229590.924 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:33:10.924Z,1387229590.924 [DVL_micro](INFO): Querying output modes
2013-12-16T21:33:10.924Z,1387229590.924 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD0606

2013-12-16T21:33:12.927Z,1387229592.927 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:33:12.927Z,1387229592.927 [DVL_micro](INFO): Output Modes: No Response
2013-12-16T21:33:12.927Z,1387229592.927 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD2525

2013-12-16T21:33:14.930Z,1387229594.930 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:33:16.938Z,1387229596.938 [DVL_micro](INFO): NQ1 requested
2013-12-16T21:33:16.938Z,1387229596.938 [DVL_micro](INFO): Cycling power to configure device.
2013-12-16T21:33:18.941Z,1387229598.941 [DVL_micro](INFO): Opening uart, block timeout 10ths=20
2013-12-16T21:33:18.941Z,1387229598.941 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD1616 00 0

2013-12-16T21:33:20.948Z,1387229600.948 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:33:20.948Z,1387229600.948 [DVL_micro](INFO): Enabling NQ1 output
2013-12-16T21:33:20.948Z,1387229600.948 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD0505 01 1

2013-12-16T21:33:22.958Z,1387229602.958 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:33:22.959Z,1387229602.959 [DVL_micro](INFO): Querying output modes
2013-12-16T21:33:22.959Z,1387229602.959 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD0606

2013-12-16T21:33:24.966Z,1387229604.966 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:33:24.966Z,1387229604.966 [DVL_micro](INFO): Output Modes: No Response
2013-12-16T21:33:24.966Z,1387229604.966 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD2525

2013-12-16T21:33:25.045Z,1387229605.045 [DataOverHttps](INFO): tcpConnect
2013-12-16T21:33:25.442Z,1387229605.442 [DataOverHttps](INFO): tcpConnecting
2013-12-16T21:33:25.442Z,1387229605.442 [DataOverHttps](INFO): sslConnect
2013-12-16T21:33:25.444Z,1387229605.444 [DataOverHttps](INFO): sslConnecting
2013-12-16T21:33:25.843Z,1387229605.843 [DataOverHttps](INFO): sslConnecting
2013-12-16T21:33:26.351Z,1387229606.351 [DataOverHttps](INFO): sslConnecting
2013-12-16T21:33:26.353Z,1387229606.353 [DataOverHttps](INFO): dataWrite
2013-12-16T21:33:26.353Z,1387229606.353 [DataOverHttps](INFO): dataWriting
2013-12-16T21:33:26.354Z,1387229606.354 [DataOverHttps](INFO): Wrote 206 bytes.
2013-12-16T21:33:26.752Z,1387229606.752 [DataOverHttps](INFO): dataRead
2013-12-16T21:33:26.969Z,1387229606.969 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:33:27.153Z,1387229607.153 [DataOverHttps](INFO): dataRead
2013-12-16T21:33:27.154Z,1387229607.154 [DataOverHttps](INFO): disconnect
2013-12-16T21:33:28.980Z,1387229608.980 [DVL_micro](INFO): NQ1 requested
2013-12-16T21:33:28.981Z,1387229608.981 [DVL_micro](INFO): Cycling power to configure device.
2013-12-16T21:33:30.983Z,1387229610.983 [DVL_micro](INFO): Opening uart, block timeout 10ths=20
2013-12-16T21:33:30.984Z,1387229610.984 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD1616 00 0

2013-12-16T21:33:32.990Z,1387229612.990 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:33:32.990Z,1387229612.990 [DVL_micro](INFO): Enabling NQ1 output
2013-12-16T21:33:32.990Z,1387229612.990 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD0505 01 1

2013-12-16T21:33:35.001Z,1387229615.001 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:33:35.001Z,1387229615.001 [DVL_micro](INFO): Querying output modes
2013-12-16T21:33:35.001Z,1387229615.001 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD0606

2013-12-16T21:33:37.004Z,1387229617.004 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:33:37.004Z,1387229617.004 [DVL_micro](INFO): Output Modes: No Response
2013-12-16T21:33:37.005Z,1387229617.005 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD2525

2013-12-16T21:33:39.015Z,1387229619.015 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:33:41.023Z,1387229621.023 [DVL_micro](INFO): NQ1 requested
2013-12-16T21:33:41.023Z,1387229621.023 [DVL_micro](INFO): Cycling power to configure device.
2013-12-16T21:33:42.783Z,1387229622.783 [CBIT](INFO): Clearing failed count for component NAL9602
2013-12-16T21:33:42.783Z,1387229622.783 [NAL9602] No Fault, FailCount= 2
2013-12-16T21:33:43.026Z,1387229623.026 [DVL_micro](INFO): Opening uart, block timeout 10ths=20
2013-12-16T21:33:43.026Z,1387229623.026 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD1616 00 0

2013-12-16T21:33:43.163Z,1387229623.163 [NAL9602](INFO): Powering up NAL9602
2013-12-16T21:33:45.037Z,1387229625.037 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:33:45.037Z,1387229625.037 [DVL_micro](INFO): Enabling NQ1 output
2013-12-16T21:33:45.037Z,1387229625.037 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD0505 01 1

2013-12-16T21:33:47.040Z,1387229627.040 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:33:47.040Z,1387229627.040 [DVL_micro](INFO): Querying output modes
2013-12-16T21:33:47.040Z,1387229627.040 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD0606

2013-12-16T21:33:49.051Z,1387229629.051 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:33:49.051Z,1387229629.051 [DVL_micro](INFO): Output Modes: No Response
2013-12-16T21:33:49.051Z,1387229629.051 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD2525

2013-12-16T21:33:51.058Z,1387229631.058 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:33:53.062Z,1387229633.062 [DVL_micro](INFO): NQ1 requested
2013-12-16T21:33:53.062Z,1387229633.062 [DVL_micro](INFO): Cycling power to configure device.
2013-12-16T21:33:53.569Z,1387229633.569 [Default:CallIridium] Running Loop=1
2013-12-16T21:33:53.569Z,1387229633.569 [Default:CallIridium](INFO): Aggregate::initialize Default:CallIridium
2013-12-16T21:33:53.570Z,1387229633.570 [Default:CallIridium:A] Running Loop=1
2013-12-16T21:33:53.570Z,1387229633.570 [Default:CallIridium:A] Stopped
2013-12-16T21:33:53.570Z,1387229633.570 [Default:CallIridium:B] Running Loop=1
2013-12-16T21:33:53.570Z,1387229633.570 [Default:CallIridium:B](INFO): Aggregate::initialize Default:CallIridium:B
2013-12-16T21:33:55.065Z,1387229635.065 [DVL_micro](INFO): Opening uart, block timeout 10ths=20
2013-12-16T21:33:55.065Z,1387229635.065 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD1616 00 0

2013-12-16T21:33:55.974Z,1387229635.974 [NAL9602](ERROR): NAL9602 initialize uart error: serial timeout
2013-12-16T21:33:55.974Z,1387229635.974 [NAL9602] Communications Fault, FailCount= 1
2013-12-16T21:33:55.974Z,1387229635.974 [NAL9602](ERROR): Communications Fault
2013-12-16T21:33:56.005Z,1387229636.005 [Default:Iridium] Running Loop=1
2013-12-16T21:33:56.005Z,1387229636.005 [Default:Iridium](INFO): Aggregate::initialize Default:Iridium
2013-12-16T21:33:56.005Z,1387229636.005 [Default:Iridium:A.SetSpeed] Running Loop=1
2013-12-16T21:33:56.005Z,1387229636.005 [Default:Iridium:A.SetSpeed](DEBUG): Initialize.
2013-12-16T21:33:56.010Z,1387229636.010 [Default:Iridium:B.GoToSurface] Running Loop=1
2013-12-16T21:33:56.010Z,1387229636.010 [Default:Iridium:B.GoToSurface](DEBUG): Initialize GoToSurfaceComponent.
2013-12-16T21:33:56.011Z,1387229636.011 [Default:Iridium:B.GoToSurface] Stopped
2013-12-16T21:33:56.011Z,1387229636.011 [Default:Iridium:B.GoToSurface](DEBUG): Uninitialize GoToSurfaceComponent.
2013-12-16T21:33:56.011Z,1387229636.011 [Default:Iridium:Read_Iridium] Running Loop=1
2013-12-16T21:33:56.025Z,1387229636.025 [CBIT](ERROR): Communications Fault in component: NAL9602
2013-12-16T21:33:56.079Z,1387229636.079 [DataOverHttps](INFO): tcpConnect
2013-12-16T21:33:56.082Z,1387229636.082 [NAL9602](INFO): Powering down
2013-12-16T21:33:56.833Z,1387229636.833 [DataOverHttps](INFO): tcpConnecting
2013-12-16T21:33:56.834Z,1387229636.834 [DataOverHttps](INFO): sslConnect
2013-12-16T21:33:56.835Z,1387229636.835 [DataOverHttps](INFO): sslConnecting
2013-12-16T21:33:56.963Z,1387229636.963 [DataOverHttps](INFO): sslConnecting
2013-12-16T21:33:57.067Z,1387229637.067 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:33:57.068Z,1387229637.068 [DVL_micro](INFO): Enabling NQ1 output
2013-12-16T21:33:57.068Z,1387229637.068 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD0505 01 1

2013-12-16T21:33:57.467Z,1387229637.467 [CBIT](INFO): Clearing failed state for component NAL9602
2013-12-16T21:33:57.467Z,1387229637.467 [NAL9602] No Fault, FailCount= 1
2013-12-16T21:33:57.481Z,1387229637.481 [DataOverHttps](INFO): sslConnecting
2013-12-16T21:33:57.483Z,1387229637.483 [DataOverHttps](INFO): dataWrite
2013-12-16T21:33:57.486Z,1387229637.486 [DataOverHttps](INFO): encoded 610 bytes: %5d%00%00%04%00%26%02%00%00%00%00%00%00%00%15%1d%80%03%0cVb%02T%99%fb%fe%90%c9%d7%2f4%11%df%9b%a0%5c%eb%7d%a9%3a%7b%8d%9f%c0%5e%5eB%a5%9d%eca%e6%99zf%5d%d1J%5d_%84%0d%a5%9bL%9b%ec%bf%ec%c8%ab%f5%1d%c3%13%d4%070%01a%811%1eL%c9%19%23%c0%d8%f73%c5%e2%b8%23%f7Y%f5%10K%e2+%26%c4%40_K%05%1c%7d%ecn%c1%feH%b8iqp%8d%28~%b1%fe%d30%d8%ba%ff%fc%27fw%28%ac%81%22G%d7%19%12%12%e8%0aF%85%b1%b1%c9y%ea%d3Q%fc%e6%5e%10%d4%d0%e2%04%f5Z%ed%a7n%8e%09Iv%feO%dd%102%dc%a95%0b%ecs%f8%155F%82%0c%2c%cdl%c3%16L%98%17%b7G%0bo%aa%95+%e1%c1Q%bc8%1d%91%cf%f0%0a%ecu%22%a5ld%97%bd%3ay%e6x%d1E%a8M%18%96-%26%b0%06%fc%dch%af%f6M%cf%0d%17%23
2013-12-16T21:33:57.487Z,1387229637.487 [DataOverHttps](INFO): Sending 244 bytes from file Logs/20131216T211549/Courier0016.lzma
2013-12-16T21:33:57.487Z,1387229637.487 [DataOverHttps](INFO): dataWriting
2013-12-16T21:33:57.519Z,1387229637.519 [DataOverHttps](INFO): Wrote 883 bytes.
2013-12-16T21:33:57.885Z,1387229637.885 [DataOverHttps](INFO): dataRead
2013-12-16T21:33:58.285Z,1387229638.285 [DataOverHttps](INFO): dataRead
2013-12-16T21:33:58.286Z,1387229638.286 [DataOverHttps](INFO): Moved sent file to Logs/20131216T211549/Courier0016.lzma.bak
2013-12-16T21:33:58.286Z,1387229638.286 [DataOverHttps](INFO): SBD MOMSN=271457
2013-12-16T21:33:58.286Z,1387229638.286 [DataOverHttps](INFO): disconnect
2013-12-16T21:33:59.074Z,1387229639.074 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:33:59.075Z,1387229639.075 [DVL_micro](INFO): Querying output modes
2013-12-16T21:33:59.075Z,1387229639.075 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD0606

2013-12-16T21:33:59.225Z,1387229639.225 [DataOverHttps](INFO): tcpConnect
2013-12-16T21:33:59.265Z,1387229639.265 [DataOverHttps](INFO): tcpConnecting
2013-12-16T21:33:59.265Z,1387229639.265 [DataOverHttps](INFO): sslConnect
2013-12-16T21:33:59.266Z,1387229639.266 [DataOverHttps](INFO): sslConnecting
2013-12-16T21:33:59.666Z,1387229639.666 [DataOverHttps](INFO): sslConnecting
2013-12-16T21:34:00.182Z,1387229640.182 [DataOverHttps](INFO): sslConnecting
2013-12-16T21:34:00.184Z,1387229640.184 [DataOverHttps](INFO): dataWrite
2013-12-16T21:34:00.185Z,1387229640.185 [DataOverHttps](INFO): encoded 507 bytes: %5d%00%00%04%00%f3%01%00%00%00%00%00%00%00%15%1d%80%03%0cVb%02s%89%e7%22.%80%1c%b2l%f9h%00%fc%0c%7c%ecM%9f%c3%17%7f%d5%d4%d8j4%d4%3f1%82%c1%c9%d6%27%1an%ff%08%fe%f1%3a%97%f0%b7+%0d.%1b%8aG%a5%97%87%0c%1c%d2%de%02q%25%9e%d9%3f%f8%5e%7dM%d4%5bV%f3%b4%07%ee%8d%16%bdo%af%83%c2p%e5%d4%0f%b1%e7%03%c7%bf7%af%d2%5c%8a%2c%cc%ef%94%89%cf%12%7d%881%0b%c3B%17%8a%a3%3e%f4.r%d4ub%e5qB%26S%ce%c0%fd%a8%d5%cf%15%d4%921%972%09%af%e5%e2%a4%c5%5c%3c%da%14%a6O%a1%b2%91%ad%13%88%089%c5%b3%e5%a0%ff%1b%e5%83%b7%b6%9ey%b5F3%c0
2013-12-16T21:34:00.186Z,1387229640.186 [DataOverHttps](INFO): Sending 193 bytes from file Logs/20131216T211549/Express0017.lzma
2013-12-16T21:34:00.186Z,1387229640.186 [DataOverHttps](INFO): dataWriting
2013-12-16T21:34:00.224Z,1387229640.224 [DataOverHttps](INFO): Wrote 780 bytes.
2013-12-16T21:34:00.584Z,1387229640.584 [DataOverHttps](INFO): dataRead
2013-12-16T21:34:00.985Z,1387229640.985 [DataOverHttps](INFO): dataRead
2013-12-16T21:34:00.987Z,1387229640.987 [DataOverHttps](INFO): Moved sent file to Logs/20131216T211549/Express0017.lzma.bak
2013-12-16T21:34:00.987Z,1387229640.987 [DataOverHttps](INFO): SBD MOMSN=271467
2013-12-16T21:34:00.987Z,1387229640.987 [DataOverHttps](INFO): disconnect
2013-12-16T21:34:01.082Z,1387229641.082 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:34:01.082Z,1387229641.082 [DVL_micro](INFO): Output Modes: No Response
2013-12-16T21:34:01.082Z,1387229641.082 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD2525

2013-12-16T21:34:01.920Z,1387229641.920 [DataOverHttps](INFO): tcpConnect
2013-12-16T21:34:01.923Z,1387229641.923 [NAL9602](INFO): Powering up NAL9602
2013-12-16T21:34:03.093Z,1387229643.093 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:34:05.104Z,1387229645.104 [DVL_micro](INFO): NQ1 requested
2013-12-16T21:34:05.105Z,1387229645.105 [DVL_micro](INFO): Cycling power to configure device.
2013-12-16T21:34:05.522Z,1387229645.522 [Default:Iridium:Read_Iridium] Stopped
2013-12-16T21:34:05.522Z,1387229645.522 [Default:Iridium](INFO): Completed Default:Iridium
2013-12-16T21:34:05.522Z,1387229645.522 [Default:Iridium] Stopped
2013-12-16T21:34:05.522Z,1387229645.522 [Default:Iridium](INFO): Aggregate::uninitialize Default:Iridium
2013-12-16T21:34:05.523Z,1387229645.523 [Default:Iridium:A.SetSpeed] Stopped
2013-12-16T21:34:05.523Z,1387229645.523 [Default:Iridium:A.SetSpeed](DEBUG): Uninitialize.
2013-12-16T21:34:05.639Z,1387229645.639 [DataOverHttps](INFO): tcpConnecting
2013-12-16T21:34:05.639Z,1387229645.639 [DataOverHttps](INFO): sslConnect
2013-12-16T21:34:05.640Z,1387229645.640 [DataOverHttps](INFO): sslConnecting
2013-12-16T21:34:05.658Z,1387229645.658 [Default:CallIridium:B](INFO): Completed Default:CallIridium:B
2013-12-16T21:34:05.658Z,1387229645.658 [Default:CallIridium:B] Stopped
2013-12-16T21:34:05.658Z,1387229645.658 [Default:CallIridium:B](INFO): Aggregate::uninitialize Default:CallIridium:B
2013-12-16T21:34:05.658Z,1387229645.658 [Default:CallIridium](INFO): Completed Default:CallIridium
2013-12-16T21:34:05.659Z,1387229645.659 [Default:CallIridium] Stopped
2013-12-16T21:34:05.659Z,1387229645.659 [Default:CallIridium](INFO): Aggregate::uninitialize Default:CallIridium
2013-12-16T21:34:05.948Z,1387229645.948 [DataOverHttps](INFO): sslConnecting
2013-12-16T21:34:06.453Z,1387229646.453 [DataOverHttps](INFO): sslConnecting
2013-12-16T21:34:06.455Z,1387229646.455 [DataOverHttps](INFO): dataWrite
2013-12-16T21:34:06.455Z,1387229646.455 [DataOverHttps](INFO): dataWriting
2013-12-16T21:34:06.456Z,1387229646.456 [DataOverHttps](INFO): Wrote 206 bytes.
2013-12-16T21:34:06.854Z,1387229646.854 [DataOverHttps](INFO): dataRead
2013-12-16T21:34:07.107Z,1387229647.107 [DVL_micro](INFO): Opening uart, block timeout 10ths=20
2013-12-16T21:34:07.108Z,1387229647.108 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD1616 00 0

2013-12-16T21:34:07.255Z,1387229647.255 [DataOverHttps](INFO): dataRead
2013-12-16T21:34:07.256Z,1387229647.256 [DataOverHttps](INFO): disconnect
2013-12-16T21:34:09.110Z,1387229649.110 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:34:09.110Z,1387229649.110 [DVL_micro](INFO): Enabling NQ1 output
2013-12-16T21:34:09.110Z,1387229649.110 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD0505 01 1

2013-12-16T21:34:11.117Z,1387229651.117 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:34:11.117Z,1387229651.117 [DVL_micro](INFO): Querying output modes
2013-12-16T21:34:11.117Z,1387229651.117 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD0606

2013-12-16T21:34:13.120Z,1387229653.120 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:34:13.120Z,1387229653.120 [DVL_micro](INFO): Output Modes: No Response
2013-12-16T21:34:13.121Z,1387229653.121 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD2525

2013-12-16T21:34:14.470Z,1387229654.470 [NAL9602](ERROR): NAL9602 initialize uart error: serial timeout
2013-12-16T21:34:14.470Z,1387229654.470 [NAL9602] Communications Fault, FailCount= 2
2013-12-16T21:34:14.471Z,1387229654.471 [NAL9602](ERROR): Communications Fault
2013-12-16T21:34:14.499Z,1387229654.499 [CBIT](ERROR): Communications Fault in component: NAL9602
2013-12-16T21:34:14.499Z,1387229654.499 [CBIT](CRITICAL): Communications Fault in component: NAL9602
2013-12-16T21:34:14.577Z,1387229654.577 [NAL9602](INFO): Powering down
2013-12-16T21:34:15.127Z,1387229655.127 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:34:17.131Z,1387229657.131 [DVL_micro](INFO): NQ1 requested
2013-12-16T21:34:17.131Z,1387229657.131 [DVL_micro](INFO): Cycling power to configure device.
2013-12-16T21:34:19.134Z,1387229659.134 [DVL_micro](INFO): Opening uart, block timeout 10ths=20
2013-12-16T21:34:19.134Z,1387229659.134 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD1616 00 0

2013-12-16T21:34:21.141Z,1387229661.141 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:34:21.141Z,1387229661.141 [DVL_micro](INFO): Enabling NQ1 output
2013-12-16T21:34:21.141Z,1387229661.141 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD0505 01 1

2013-12-16T21:34:21.344Z,1387229661.344 [CBIT](INFO): Clearing failed count for component DAT
2013-12-16T21:34:21.345Z,1387229661.345 [DAT] No Fault, FailCount= 3
2013-12-16T21:34:21.731Z,1387229661.731 [DAT](INFO): Powering up
2013-12-16T21:34:21.731Z,1387229661.731 [DAT](DEBUG): Initializing DAT.
2013-12-16T21:34:23.152Z,1387229663.152 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:34:23.152Z,1387229663.152 [DVL_micro](INFO): Querying output modes
2013-12-16T21:34:23.152Z,1387229663.152 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD0606

2013-12-16T21:34:25.155Z,1387229665.155 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:34:25.155Z,1387229665.155 [DVL_micro](INFO): Output Modes: No Response
2013-12-16T21:34:25.155Z,1387229665.155 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD2525

2013-12-16T21:34:27.166Z,1387229667.166 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:34:29.178Z,1387229669.178 [DVL_micro](INFO): NQ1 requested
2013-12-16T21:34:29.178Z,1387229669.178 [DVL_micro](INFO): Cycling power to configure device.
2013-12-16T21:34:31.181Z,1387229671.181 [DVL_micro](INFO): Opening uart, block timeout 10ths=20
2013-12-16T21:34:31.181Z,1387229671.181 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD1616 00 0

2013-12-16T21:34:32.117Z,1387229672.117 [DataOverHttps](INFO): tcpConnect
2013-12-16T21:34:32.514Z,1387229672.514 [DataOverHttps](INFO): tcpConnecting
2013-12-16T21:34:32.514Z,1387229672.514 [DataOverHttps](INFO): sslConnect
2013-12-16T21:34:32.516Z,1387229672.516 [DataOverHttps](INFO): sslConnecting
2013-12-16T21:34:32.915Z,1387229672.915 [DataOverHttps](INFO): sslConnecting
2013-12-16T21:34:33.191Z,1387229673.191 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:34:33.192Z,1387229673.192 [DVL_micro](INFO): Enabling NQ1 output
2013-12-16T21:34:33.192Z,1387229673.192 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD0505 01 1

2013-12-16T21:34:33.441Z,1387229673.441 [DataOverHttps](INFO): sslConnecting
2013-12-16T21:34:33.443Z,1387229673.443 [DataOverHttps](INFO): dataWrite
2013-12-16T21:34:33.444Z,1387229673.444 [DataOverHttps](INFO): dataWriting
2013-12-16T21:34:33.445Z,1387229673.445 [DataOverHttps](INFO): Wrote 206 bytes.
2013-12-16T21:34:33.844Z,1387229673.844 [DataOverHttps](INFO): dataRead
2013-12-16T21:34:34.245Z,1387229674.245 [DataOverHttps](INFO): dataRead
2013-12-16T21:34:34.245Z,1387229674.245 [DataOverHttps](INFO): disconnect
2013-12-16T21:34:35.194Z,1387229675.194 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:34:35.195Z,1387229675.195 [DVL_micro](INFO): Querying output modes
2013-12-16T21:34:35.195Z,1387229675.195 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD0606

2013-12-16T21:34:37.202Z,1387229677.202 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:34:37.203Z,1387229677.203 [DVL_micro](INFO): Output Modes: No Response
2013-12-16T21:34:37.203Z,1387229677.203 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD2525

2013-12-16T21:34:39.205Z,1387229679.205 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:34:41.208Z,1387229681.208 [DVL_micro](INFO): NQ1 requested
2013-12-16T21:34:41.209Z,1387229681.209 [DVL_micro](INFO): Cycling power to configure device.
2013-12-16T21:34:41.368Z,1387229681.368 [DAT](INFO): Init failed - response: 
2013-12-16T21:34:41.368Z,1387229681.368 [DAT](FAULT): DAT failed to initialize
2013-12-16T21:34:41.368Z,1387229681.368 [DAT] Communications Fault, FailCount= 1
2013-12-16T21:34:41.368Z,1387229681.368 [DAT](ERROR): Communications Fault
2013-12-16T21:34:41.392Z,1387229681.392 [CBIT](ERROR): Communications Fault in component: DAT
2013-12-16T21:34:41.463Z,1387229681.463 [DAT](INFO): Powering down
2013-12-16T21:34:42.277Z,1387229682.277 [CBIT](INFO): Clearing failed state for component DAT
2013-12-16T21:34:42.277Z,1387229682.277 [DAT] No Fault, FailCount= 1
2013-12-16T21:34:43.211Z,1387229683.211 [DVL_micro](INFO): Opening uart, block timeout 10ths=20
2013-12-16T21:34:43.212Z,1387229683.212 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD1616 00 0

2013-12-16T21:34:44.660Z,1387229684.660 [DAT](INFO): Powering up
2013-12-16T21:34:44.661Z,1387229684.661 [DAT](DEBUG): Initializing DAT.
2013-12-16T21:34:45.219Z,1387229685.219 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:34:45.219Z,1387229685.219 [DVL_micro](INFO): Enabling NQ1 output
2013-12-16T21:34:45.219Z,1387229685.219 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD0505 01 1

2013-12-16T21:34:47.229Z,1387229687.229 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:34:47.229Z,1387229687.229 [DVL_micro](INFO): Querying output modes
2013-12-16T21:34:47.229Z,1387229687.229 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD0606

2013-12-16T21:34:49.236Z,1387229689.236 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:34:49.236Z,1387229689.236 [DVL_micro](INFO): Output Modes: No Response
2013-12-16T21:34:49.237Z,1387229689.237 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD2525

2013-12-16T21:34:51.247Z,1387229691.247 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:34:53.251Z,1387229693.251 [DVL_micro](INFO): NQ1 requested
2013-12-16T21:34:53.251Z,1387229693.251 [DVL_micro](INFO): Cycling power to configure device.
2013-12-16T21:34:55.254Z,1387229695.254 [DVL_micro](INFO): Opening uart, block timeout 10ths=20
2013-12-16T21:34:55.254Z,1387229695.254 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD1616 00 0

2013-12-16T21:34:57.261Z,1387229697.261 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:34:57.261Z,1387229697.261 [DVL_micro](INFO): Enabling NQ1 output
2013-12-16T21:34:57.261Z,1387229697.261 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD0505 01 1

2013-12-16T21:34:59.264Z,1387229699.264 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:34:59.264Z,1387229699.264 [DVL_micro](INFO): Querying output modes
2013-12-16T21:34:59.264Z,1387229699.264 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD0606

2013-12-16T21:35:01.271Z,1387229701.271 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:35:01.271Z,1387229701.271 [DVL_micro](INFO): Output Modes: No Response
2013-12-16T21:35:01.271Z,1387229701.271 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD2525

2013-12-16T21:35:02.244Z,1387229702.244 [DataOverHttps](INFO): tcpConnect
2013-12-16T21:35:02.644Z,1387229702.644 [DataOverHttps](INFO): tcpConnecting
2013-12-16T21:35:02.645Z,1387229702.645 [DataOverHttps](INFO): sslConnect
2013-12-16T21:35:02.646Z,1387229702.646 [DataOverHttps](INFO): sslConnecting
2013-12-16T21:35:03.045Z,1387229703.045 [DataOverHttps](INFO): sslConnecting
2013-12-16T21:35:03.278Z,1387229703.278 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:35:03.560Z,1387229703.560 [DataOverHttps](INFO): sslConnecting
2013-12-16T21:35:03.562Z,1387229703.562 [DataOverHttps](INFO): dataWrite
2013-12-16T21:35:03.563Z,1387229703.563 [DataOverHttps](INFO): dataWriting
2013-12-16T21:35:03.564Z,1387229703.564 [DataOverHttps](INFO): Wrote 206 bytes.
2013-12-16T21:35:03.963Z,1387229703.963 [DataOverHttps](INFO): dataRead
2013-12-16T21:35:04.288Z,1387229704.288 [DAT](INFO): Init failed - response: 
2013-12-16T21:35:04.288Z,1387229704.288 [DAT](FAULT): DAT failed to initialize
2013-12-16T21:35:04.288Z,1387229704.288 [DAT] Communications Fault, FailCount= 2
2013-12-16T21:35:04.288Z,1387229704.288 [DAT](ERROR): Communications Fault
2013-12-16T21:35:04.314Z,1387229704.314 [CBIT](ERROR): Communications Fault in component: DAT
2013-12-16T21:35:04.364Z,1387229704.364 [DataOverHttps](INFO): dataRead
2013-12-16T21:35:04.364Z,1387229704.364 [DataOverHttps](INFO): disconnect
2013-12-16T21:35:04.375Z,1387229704.375 [DAT](INFO): Powering down
2013-12-16T21:35:05.197Z,1387229705.197 [CBIT](INFO): Clearing failed state for component DAT
2013-12-16T21:35:05.197Z,1387229705.197 [DAT] No Fault, FailCount= 2
2013-12-16T21:35:05.290Z,1387229705.290 [DVL_micro](INFO): NQ1 requested
2013-12-16T21:35:05.290Z,1387229705.290 [DVL_micro](INFO): Cycling power to configure device.
2013-12-16T21:35:07.293Z,1387229707.293 [DVL_micro](INFO): Opening uart, block timeout 10ths=20
2013-12-16T21:35:07.293Z,1387229707.293 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD1616 00 0

2013-12-16T21:35:07.575Z,1387229707.575 [DAT](INFO): Powering up
2013-12-16T21:35:07.576Z,1387229707.576 [DAT](DEBUG): Initializing DAT.
2013-12-16T21:35:09.300Z,1387229709.300 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:35:09.300Z,1387229709.300 [DVL_micro](INFO): Enabling NQ1 output
2013-12-16T21:35:09.301Z,1387229709.301 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD0505 01 1

2013-12-16T21:35:11.311Z,1387229711.311 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:35:11.311Z,1387229711.311 [DVL_micro](INFO): Querying output modes
2013-12-16T21:35:11.311Z,1387229711.311 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD0606

2013-12-16T21:35:13.318Z,1387229713.318 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:35:13.318Z,1387229713.318 [DVL_micro](INFO): Output Modes: No Response
2013-12-16T21:35:13.318Z,1387229713.318 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD2525

2013-12-16T21:35:15.329Z,1387229715.329 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:35:17.337Z,1387229717.337 [DVL_micro](INFO): NQ1 requested
2013-12-16T21:35:17.337Z,1387229717.337 [DVL_micro](INFO): Cycling power to configure device.
2013-12-16T21:35:19.339Z,1387229719.339 [DVL_micro](INFO): Opening uart, block timeout 10ths=20
2013-12-16T21:35:19.340Z,1387229719.340 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD1616 00 0

2013-12-16T21:35:21.346Z,1387229721.346 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:35:21.346Z,1387229721.346 [DVL_micro](INFO): Enabling NQ1 output
2013-12-16T21:35:21.346Z,1387229721.346 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD0505 01 1

2013-12-16T21:35:23.357Z,1387229723.357 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:35:23.357Z,1387229723.357 [DVL_micro](INFO): Querying output modes
2013-12-16T21:35:23.357Z,1387229723.357 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD0606

2013-12-16T21:35:25.368Z,1387229725.368 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:35:25.368Z,1387229725.368 [DVL_micro](INFO): Output Modes: No Response
2013-12-16T21:35:25.369Z,1387229725.369 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD2525

2013-12-16T21:35:27.079Z,1387229727.079 [DAT](INFO): Init failed - response: 
2013-12-16T21:35:27.079Z,1387229727.079 [DAT](FAULT): DAT failed to initialize
2013-12-16T21:35:27.079Z,1387229727.079 [DAT] Communications Fault, FailCount= 3
2013-12-16T21:35:27.079Z,1387229727.079 [DAT](ERROR): Communications Fault
2013-12-16T21:35:27.097Z,1387229727.097 [CBIT](ERROR): Communications Fault in component: DAT
2013-12-16T21:35:27.097Z,1387229727.097 [CBIT](CRITICAL): Communications Fault in component: DAT
2013-12-16T21:35:27.174Z,1387229727.174 [DAT](INFO): Powering down
2013-12-16T21:35:27.379Z,1387229727.379 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:35:29.383Z,1387229729.383 [DVL_micro](INFO): NQ1 requested
2013-12-16T21:35:29.383Z,1387229729.383 [DVL_micro](INFO): Cycling power to configure device.
2013-12-16T21:35:31.386Z,1387229731.386 [DVL_micro](INFO): Opening uart, block timeout 10ths=20
2013-12-16T21:35:31.386Z,1387229731.386 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD1616 00 0

2013-12-16T21:35:32.370Z,1387229732.370 [DataOverHttps](INFO): tcpConnect
2013-12-16T21:35:32.763Z,1387229732.763 [DataOverHttps](INFO): tcpConnecting
2013-12-16T21:35:32.763Z,1387229732.763 [DataOverHttps](INFO): sslConnect
2013-12-16T21:35:32.765Z,1387229732.765 [DataOverHttps](INFO): sslConnecting
2013-12-16T21:35:33.164Z,1387229733.164 [DataOverHttps](INFO): sslConnecting
2013-12-16T21:35:33.389Z,1387229733.389 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:35:33.389Z,1387229733.389 [DVL_micro](INFO): Enabling NQ1 output
2013-12-16T21:35:33.389Z,1387229733.389 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD0505 01 1

2013-12-16T21:35:33.682Z,1387229733.682 [DataOverHttps](INFO): sslConnecting
2013-12-16T21:35:33.683Z,1387229733.683 [DataOverHttps](INFO): dataWrite
2013-12-16T21:35:33.684Z,1387229733.684 [DataOverHttps](INFO): dataWriting
2013-12-16T21:35:33.685Z,1387229733.685 [DataOverHttps](INFO): Wrote 206 bytes.
2013-12-16T21:35:34.087Z,1387229734.087 [DataOverHttps](INFO): dataRead
2013-12-16T21:35:34.482Z,1387229734.482 [DataOverHttps](INFO): dataRead
2013-12-16T21:35:34.483Z,1387229734.483 [DataOverHttps](INFO): disconnect
2013-12-16T21:35:35.392Z,1387229735.392 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:35:35.392Z,1387229735.392 [DVL_micro](INFO): Querying output modes
2013-12-16T21:35:35.392Z,1387229735.392 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD0606

2013-12-16T21:35:37.395Z,1387229737.395 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:35:37.395Z,1387229737.395 [DVL_micro](INFO): Output Modes: No Response
2013-12-16T21:35:37.395Z,1387229737.395 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD2525

2013-12-16T21:35:39.408Z,1387229739.408 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:35:41.418Z,1387229741.418 [DVL_micro](INFO): NQ1 requested
2013-12-16T21:35:41.418Z,1387229741.418 [DVL_micro](INFO): Cycling power to configure device.
2013-12-16T21:35:43.421Z,1387229743.421 [DVL_micro](INFO): Opening uart, block timeout 10ths=20
2013-12-16T21:35:43.421Z,1387229743.421 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD1616 00 0

2013-12-16T21:35:45.427Z,1387229745.427 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:35:45.427Z,1387229745.427 [DVL_micro](INFO): Enabling NQ1 output
2013-12-16T21:35:45.428Z,1387229745.428 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD0505 01 1

2013-12-16T21:35:47.434Z,1387229747.434 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:35:47.435Z,1387229747.435 [DVL_micro](INFO): Querying output modes
2013-12-16T21:35:47.435Z,1387229747.435 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD0606

2013-12-16T21:35:49.446Z,1387229749.446 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:35:49.446Z,1387229749.446 [DVL_micro](INFO): Output Modes: No Response
2013-12-16T21:35:49.446Z,1387229749.446 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD2525

2013-12-16T21:35:51.453Z,1387229751.453 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:35:53.460Z,1387229753.460 [DVL_micro](INFO): NQ1 requested
2013-12-16T21:35:53.461Z,1387229753.461 [DVL_micro](INFO): Cycling power to configure device.
2013-12-16T21:35:55.463Z,1387229755.463 [DVL_micro](INFO): Opening uart, block timeout 10ths=20
2013-12-16T21:35:55.464Z,1387229755.464 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD1616 00 0

2013-12-16T21:35:57.470Z,1387229757.470 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:35:57.470Z,1387229757.470 [DVL_micro](INFO): Enabling NQ1 output
2013-12-16T21:35:57.470Z,1387229757.470 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD0505 01 1

2013-12-16T21:35:59.477Z,1387229759.477 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:35:59.477Z,1387229759.477 [DVL_micro](INFO): Querying output modes
2013-12-16T21:35:59.477Z,1387229759.477 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD0606

2013-12-16T21:36:01.488Z,1387229761.488 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:36:01.488Z,1387229761.488 [DVL_micro](INFO): Output Modes: No Response
2013-12-16T21:36:01.489Z,1387229761.489 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD2525

2013-12-16T21:36:02.485Z,1387229762.485 [DataOverHttps](INFO): tcpConnect
2013-12-16T21:36:02.882Z,1387229762.882 [DataOverHttps](INFO): tcpConnecting
2013-12-16T21:36:02.882Z,1387229762.882 [DataOverHttps](INFO): sslConnect
2013-12-16T21:36:02.884Z,1387229762.884 [DataOverHttps](INFO): sslConnecting
2013-12-16T21:36:03.283Z,1387229763.283 [DataOverHttps](INFO): sslConnecting
2013-12-16T21:36:03.501Z,1387229763.501 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:36:03.798Z,1387229763.798 [DataOverHttps](INFO): sslConnecting
2013-12-16T21:36:03.832Z,1387229763.832 [DataOverHttps](INFO): dataWrite
2013-12-16T21:36:03.832Z,1387229763.832 [DataOverHttps](INFO): dataWriting
2013-12-16T21:36:03.833Z,1387229763.833 [DataOverHttps](INFO): Wrote 206 bytes.
2013-12-16T21:36:04.200Z,1387229764.200 [DataOverHttps](INFO): dataRead
2013-12-16T21:36:04.601Z,1387229764.601 [DataOverHttps](INFO): dataRead
2013-12-16T21:36:04.610Z,1387229764.610 [DataOverHttps](INFO): disconnect
2013-12-16T21:36:05.511Z,1387229765.511 [DVL_micro](INFO): NQ1 requested
2013-12-16T21:36:05.511Z,1387229765.511 [DVL_micro](INFO): Cycling power to configure device.
2013-12-16T21:36:07.514Z,1387229767.514 [DVL_micro](INFO): Opening uart, block timeout 10ths=20
2013-12-16T21:36:07.514Z,1387229767.514 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD1616 00 0

2013-12-16T21:36:09.521Z,1387229769.521 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:36:09.521Z,1387229769.521 [DVL_micro](INFO): Enabling NQ1 output
2013-12-16T21:36:09.521Z,1387229769.521 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD0505 01 1

2013-12-16T21:36:11.524Z,1387229771.524 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:36:11.524Z,1387229771.524 [DVL_micro](INFO): Querying output modes
2013-12-16T21:36:11.524Z,1387229771.524 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD0606

2013-12-16T21:36:13.535Z,1387229773.535 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:36:13.535Z,1387229773.535 [DVL_micro](INFO): Output Modes: No Response
2013-12-16T21:36:13.536Z,1387229773.536 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD2525

2013-12-16T21:36:14.631Z,1387229774.631 [CBIT](INFO): Clearing failed count for component NAL9602
2013-12-16T21:36:14.631Z,1387229774.631 [NAL9602] No Fault, FailCount= 2
2013-12-16T21:36:15.013Z,1387229775.013 [NAL9602](INFO): Powering up NAL9602
2013-12-16T21:36:15.542Z,1387229775.542 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:36:17.546Z,1387229777.546 [DVL_micro](INFO): NQ1 requested
2013-12-16T21:36:17.546Z,1387229777.546 [DVL_micro](INFO): Cycling power to configure device.
2013-12-16T21:36:19.549Z,1387229779.549 [DVL_micro](INFO): Opening uart, block timeout 10ths=20
2013-12-16T21:36:19.549Z,1387229779.549 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD1616 00 0

2013-12-16T21:36:21.559Z,1387229781.559 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:36:21.559Z,1387229781.559 [DVL_micro](INFO): Enabling NQ1 output
2013-12-16T21:36:21.560Z,1387229781.560 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD0505 01 1

2013-12-16T21:36:23.566Z,1387229783.566 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:36:23.567Z,1387229783.567 [DVL_micro](INFO): Querying output modes
2013-12-16T21:36:23.567Z,1387229783.567 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD0606

2013-12-16T21:36:25.574Z,1387229785.574 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:36:25.574Z,1387229785.574 [DVL_micro](INFO): Output Modes: No Response
2013-12-16T21:36:25.574Z,1387229785.574 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD2525

2013-12-16T21:36:27.585Z,1387229787.585 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:36:27.825Z,1387229787.825 [NAL9602](ERROR): NAL9602 initialize uart error: serial timeout
2013-12-16T21:36:27.825Z,1387229787.825 [NAL9602] Communications Fault, FailCount= 1
2013-12-16T21:36:27.825Z,1387229787.825 [NAL9602](ERROR): Communications Fault
2013-12-16T21:36:27.853Z,1387229787.853 [CBIT](ERROR): Communications Fault in component: NAL9602
2013-12-16T21:36:27.927Z,1387229787.927 [NAL9602](INFO): Powering down
2013-12-16T21:36:28.695Z,1387229788.695 [CBIT](INFO): Clearing failed state for component NAL9602
2013-12-16T21:36:28.695Z,1387229788.695 [NAL9602] No Fault, FailCount= 1
2013-12-16T21:36:29.589Z,1387229789.589 [DVL_micro](INFO): NQ1 requested
2013-12-16T21:36:29.589Z,1387229789.589 [DVL_micro](INFO): Cycling power to configure device.
2013-12-16T21:36:31.591Z,1387229791.591 [DVL_micro](INFO): Opening uart, block timeout 10ths=20
2013-12-16T21:36:31.592Z,1387229791.592 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD1616 00 0

2013-12-16T21:36:32.668Z,1387229792.668 [DataOverHttps](INFO): tcpConnect
2013-12-16T21:36:33.069Z,1387229793.069 [DataOverHttps](INFO): tcpConnecting
2013-12-16T21:36:33.069Z,1387229793.069 [DataOverHttps](INFO): sslConnect
2013-12-16T21:36:33.070Z,1387229793.070 [DataOverHttps](INFO): sslConnecting
2013-12-16T21:36:33.077Z,1387229793.077 [NAL9602](INFO): Powering up NAL9602
2013-12-16T21:36:33.469Z,1387229793.469 [DataOverHttps](INFO): sslConnecting
2013-12-16T21:36:33.594Z,1387229793.594 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:36:33.594Z,1387229793.594 [DVL_micro](INFO): Enabling NQ1 output
2013-12-16T21:36:33.594Z,1387229793.594 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD0505 01 1

2013-12-16T21:36:33.984Z,1387229793.984 [DataOverHttps](INFO): sslConnecting
2013-12-16T21:36:33.986Z,1387229793.986 [DataOverHttps](INFO): dataWrite
2013-12-16T21:36:33.986Z,1387229793.986 [DataOverHttps](INFO): dataWriting
2013-12-16T21:36:33.988Z,1387229793.988 [DataOverHttps](INFO): Wrote 206 bytes.
2013-12-16T21:36:34.387Z,1387229794.387 [DataOverHttps](INFO): dataRead
2013-12-16T21:36:34.787Z,1387229794.787 [DataOverHttps](INFO): dataRead
2013-12-16T21:36:34.788Z,1387229794.788 [DataOverHttps](INFO): disconnect
2013-12-16T21:36:35.601Z,1387229795.601 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:36:35.601Z,1387229795.601 [DVL_micro](INFO): Querying output modes
2013-12-16T21:36:35.602Z,1387229795.602 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD0606

2013-12-16T21:36:37.609Z,1387229797.609 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:36:37.609Z,1387229797.609 [DVL_micro](INFO): Output Modes: No Response
2013-12-16T21:36:37.609Z,1387229797.609 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD2525

2013-12-16T21:36:39.619Z,1387229799.619 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:36:41.623Z,1387229801.623 [DVL_micro](INFO): NQ1 requested
2013-12-16T21:36:41.623Z,1387229801.623 [DVL_micro](INFO): Cycling power to configure device.
2013-12-16T21:36:43.626Z,1387229803.626 [DVL_micro](INFO): Opening uart, block timeout 10ths=20
2013-12-16T21:36:43.626Z,1387229803.626 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD1616 00 0

2013-12-16T21:36:45.601Z,1387229805.601 [NAL9602](ERROR): NAL9602 initialize uart error: serial timeout
2013-12-16T21:36:45.601Z,1387229805.601 [NAL9602] Communications Fault, FailCount= 2
2013-12-16T21:36:45.601Z,1387229805.601 [NAL9602](ERROR): Communications Fault
2013-12-16T21:36:45.637Z,1387229805.637 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:36:45.637Z,1387229805.637 [DVL_micro](INFO): Enabling NQ1 output
2013-12-16T21:36:45.637Z,1387229805.637 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD0505 01 1

2013-12-16T21:36:45.651Z,1387229805.651 [CBIT](ERROR): Communications Fault in component: NAL9602
2013-12-16T21:36:45.652Z,1387229805.652 [CBIT](CRITICAL): Communications Fault in component: NAL9602
2013-12-16T21:36:45.699Z,1387229805.699 [NAL9602](INFO): Powering down
2013-12-16T21:36:47.640Z,1387229807.640 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:36:47.640Z,1387229807.640 [DVL_micro](INFO): Querying output modes
2013-12-16T21:36:47.640Z,1387229807.640 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD0606

2013-12-16T21:36:49.651Z,1387229809.651 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:36:49.651Z,1387229809.651 [DVL_micro](INFO): Output Modes: No Response
2013-12-16T21:36:49.651Z,1387229809.651 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD2525

2013-12-16T21:36:51.666Z,1387229811.666 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:36:53.674Z,1387229813.674 [DVL_micro](INFO): NQ1 requested
2013-12-16T21:36:53.674Z,1387229813.674 [DVL_micro](INFO): Cycling power to configure device.
2013-12-16T21:36:55.677Z,1387229815.677 [DVL_micro](INFO): Opening uart, block timeout 10ths=20
2013-12-16T21:36:55.677Z,1387229815.677 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD1616 00 0

2013-12-16T21:36:57.683Z,1387229817.683 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:36:57.684Z,1387229817.684 [DVL_micro](INFO): Enabling NQ1 output
2013-12-16T21:36:57.684Z,1387229817.684 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD0505 01 1

2013-12-16T21:36:57.696Z,1387229817.696 [CBIT](INFO): Clearing failed count for component AHRS_sp3003D
2013-12-16T21:36:57.696Z,1387229817.696 [AHRS_sp3003D] No Fault, FailCount= 5
2013-12-16T21:36:58.067Z,1387229818.067 [AHRS_sp3003D](DEBUG): Initializing AHRS_sp3003D.
2013-12-16T21:36:59.214Z,1387229819.214 [AHRS_sp3003D](ERROR): readHeadingMagBin UART error: serial timeout
2013-12-16T21:36:59.214Z,1387229819.214 [AHRS_sp3003D](ERROR): SP3003D failed to initialize
2013-12-16T21:36:59.214Z,1387229819.214 [AHRS_sp3003D] Hardware Fault, FailCount= 1
2013-12-16T21:36:59.214Z,1387229819.214 [AHRS_sp3003D](ERROR): Hardware Fault
2013-12-16T21:36:59.240Z,1387229819.240 [CBIT](ERROR): Hardware Fault in component: AHRS_sp3003D
2013-12-16T21:36:59.270Z,1387229819.270 [AHRS_sp3003D](INFO): Powering down
2013-12-16T21:36:59.686Z,1387229819.686 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:36:59.687Z,1387229819.687 [DVL_micro](INFO): Querying output modes
2013-12-16T21:36:59.687Z,1387229819.687 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD0606

2013-12-16T21:37:00.495Z,1387229820.495 [CBIT](INFO): Clearing failed state for component AHRS_sp3003D
2013-12-16T21:37:00.495Z,1387229820.495 [AHRS_sp3003D] No Fault, FailCount= 1
2013-12-16T21:37:00.868Z,1387229820.868 [AHRS_sp3003D](DEBUG): Initializing AHRS_sp3003D.
2013-12-16T21:37:01.690Z,1387229821.690 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:37:01.690Z,1387229821.690 [DVL_micro](INFO): Output Modes: No Response
2013-12-16T21:37:01.690Z,1387229821.690 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD2525

2013-12-16T21:37:02.010Z,1387229822.010 [AHRS_sp3003D](ERROR): readHeadingMagBin UART error: serial timeout
2013-12-16T21:37:02.010Z,1387229822.010 [AHRS_sp3003D](ERROR): SP3003D failed to initialize
2013-12-16T21:37:02.010Z,1387229822.010 [AHRS_sp3003D] Hardware Fault, FailCount= 2
2013-12-16T21:37:02.010Z,1387229822.010 [AHRS_sp3003D](ERROR): Hardware Fault
2013-12-16T21:37:02.043Z,1387229822.043 [CBIT](ERROR): Hardware Fault in component: AHRS_sp3003D
2013-12-16T21:37:02.070Z,1387229822.070 [AHRS_sp3003D](INFO): Powering down
2013-12-16T21:37:02.868Z,1387229822.868 [DataOverHttps](INFO): tcpConnect
2013-12-16T21:37:03.268Z,1387229823.268 [DataOverHttps](INFO): tcpConnecting
2013-12-16T21:37:03.269Z,1387229823.269 [DataOverHttps](INFO): sslConnect
2013-12-16T21:37:03.270Z,1387229823.270 [DataOverHttps](INFO): sslConnecting
2013-12-16T21:37:03.321Z,1387229823.321 [CBIT](INFO): Clearing failed state for component AHRS_sp3003D
2013-12-16T21:37:03.321Z,1387229823.321 [AHRS_sp3003D] No Fault, FailCount= 2
2013-12-16T21:37:03.669Z,1387229823.669 [AHRS_sp3003D](DEBUG): Initializing AHRS_sp3003D.
2013-12-16T21:37:03.670Z,1387229823.670 [DataOverHttps](INFO): sslConnecting
2013-12-16T21:37:03.693Z,1387229823.693 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:37:04.190Z,1387229824.190 [DataOverHttps](INFO): sslConnecting
2013-12-16T21:37:04.192Z,1387229824.192 [DataOverHttps](INFO): dataWrite
2013-12-16T21:37:04.192Z,1387229824.192 [DataOverHttps](INFO): dataWriting
2013-12-16T21:37:04.193Z,1387229824.193 [DataOverHttps](INFO): Wrote 206 bytes.
2013-12-16T21:37:04.935Z,1387229824.935 [AHRS_sp3003D](ERROR): readHeadingMagBin UART error: serial timeout
2013-12-16T21:37:04.935Z,1387229824.935 [AHRS_sp3003D](ERROR): SP3003D failed to initialize
2013-12-16T21:37:04.935Z,1387229824.935 [AHRS_sp3003D] Hardware Fault, FailCount= 3
2013-12-16T21:37:04.935Z,1387229824.935 [AHRS_sp3003D](ERROR): Hardware Fault
2013-12-16T21:37:04.936Z,1387229824.936 [DataOverHttps](INFO): dataRead
2013-12-16T21:37:04.966Z,1387229824.966 [CBIT](ERROR): Hardware Fault in component: AHRS_sp3003D
2013-12-16T21:37:04.990Z,1387229824.990 [AHRS_sp3003D](INFO): Powering down
2013-12-16T21:37:05.080Z,1387229825.080 [DataOverHttps](INFO): dataRead
2013-12-16T21:37:05.080Z,1387229825.080 [DataOverHttps](INFO): disconnect
2013-12-16T21:37:05.704Z,1387229825.704 [DVL_micro](INFO): NQ1 requested
2013-12-16T21:37:05.705Z,1387229825.705 [DVL_micro](INFO): Cycling power to configure device.
2013-12-16T21:37:06.230Z,1387229826.230 [CBIT](INFO): Clearing failed state for component AHRS_sp3003D
2013-12-16T21:37:06.231Z,1387229826.231 [AHRS_sp3003D] No Fault, FailCount= 3
2013-12-16T21:37:06.592Z,1387229826.592 [AHRS_sp3003D](DEBUG): Initializing AHRS_sp3003D.
2013-12-16T21:37:07.707Z,1387229827.707 [DVL_micro](INFO): Opening uart, block timeout 10ths=20
2013-12-16T21:37:07.708Z,1387229827.708 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD1616 00 0

2013-12-16T21:37:07.735Z,1387229827.735 [AHRS_sp3003D](ERROR): readHeadingMagBin UART error: serial timeout
2013-12-16T21:37:07.735Z,1387229827.735 [AHRS_sp3003D](ERROR): SP3003D failed to initialize
2013-12-16T21:37:07.735Z,1387229827.735 [AHRS_sp3003D] Hardware Fault, FailCount= 4
2013-12-16T21:37:07.735Z,1387229827.735 [AHRS_sp3003D](ERROR): Hardware Fault
2013-12-16T21:37:07.765Z,1387229827.765 [CBIT](ERROR): Hardware Fault in component: AHRS_sp3003D
2013-12-16T21:37:07.790Z,1387229827.790 [AHRS_sp3003D](INFO): Powering down
2013-12-16T21:37:09.025Z,1387229829.025 [CBIT](INFO): Clearing failed state for component AHRS_sp3003D
2013-12-16T21:37:09.025Z,1387229829.025 [AHRS_sp3003D] No Fault, FailCount= 4
2013-12-16T21:37:09.393Z,1387229829.393 [AHRS_sp3003D](DEBUG): Initializing AHRS_sp3003D.
2013-12-16T21:37:09.714Z,1387229829.714 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:37:09.714Z,1387229829.714 [DVL_micro](INFO): Enabling NQ1 output
2013-12-16T21:37:09.714Z,1387229829.714 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD0505 01 1

2013-12-16T21:37:10.535Z,1387229830.535 [AHRS_sp3003D](ERROR): readHeadingMagBin UART error: serial timeout
2013-12-16T21:37:10.536Z,1387229830.536 [AHRS_sp3003D](ERROR): SP3003D failed to initialize
2013-12-16T21:37:10.536Z,1387229830.536 [AHRS_sp3003D] Hardware Fault, FailCount= 5
2013-12-16T21:37:10.536Z,1387229830.536 [AHRS_sp3003D](ERROR): Hardware Fault
2013-12-16T21:37:10.561Z,1387229830.561 [CBIT](ERROR): Hardware Fault in component: AHRS_sp3003D
2013-12-16T21:37:10.562Z,1387229830.562 [CBIT](CRITICAL): Hardware Fault in component: AHRS_sp3003D
2013-12-16T21:37:10.591Z,1387229830.591 [AHRS_sp3003D](INFO): Powering down
2013-12-16T21:37:11.725Z,1387229831.725 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:37:11.725Z,1387229831.725 [DVL_micro](INFO): Querying output modes
2013-12-16T21:37:11.725Z,1387229831.725 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD0606

2013-12-16T21:37:11.835Z,1387229831.835 [CBIT](INFO): Clearing failed count for component MassServo
2013-12-16T21:37:11.835Z,1387229831.835 [MassServo] No Fault, FailCount= 5
2013-12-16T21:37:13.736Z,1387229833.736 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:37:13.736Z,1387229833.736 [DVL_micro](INFO): Output Modes: No Response
2013-12-16T21:37:13.737Z,1387229833.737 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD2525

2013-12-16T21:37:13.953Z,1387229833.953 [MassServo](FAULT): Mass shifter EEPROM initialization uart error serial timeout
2013-12-16T21:37:13.953Z,1387229833.953 [MassServo] Communications Fault, FailCount= 1
2013-12-16T21:37:13.953Z,1387229833.953 [MassServo](ERROR): Communications Fault
2013-12-16T21:37:13.956Z,1387229833.956 [CBIT](ERROR): Communications Fault in component: MassServo
2013-12-16T21:37:13.991Z,1387229833.991 [MassServo](DEBUG): Uninitialize Mass Servo.
2013-12-16T21:37:13.991Z,1387229833.991 [MassServo](INFO): Powering down
2013-12-16T21:37:14.795Z,1387229834.795 [MassServo](DEBUG): Initializing EZServoServo.
2013-12-16T21:37:14.915Z,1387229834.915 [MassServo](DEBUG): Initializing MassServo.
2013-12-16T21:37:14.919Z,1387229834.919 [CBIT](INFO): Clearing failed state for component MassServo
2013-12-16T21:37:14.919Z,1387229834.919 [MassServo] No Fault, FailCount= 1
2013-12-16T21:37:15.743Z,1387229835.743 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:37:17.306Z,1387229837.306 [MassServo](FAULT): Mass shifter EEPROM initialization uart error serial timeout
2013-12-16T21:37:17.306Z,1387229837.306 [MassServo] Communications Fault, FailCount= 2
2013-12-16T21:37:17.306Z,1387229837.306 [MassServo](ERROR): Communications Fault
2013-12-16T21:37:17.309Z,1387229837.309 [CBIT](ERROR): Communications Fault in component: MassServo
2013-12-16T21:37:17.350Z,1387229837.350 [MassServo](DEBUG): Uninitialize Mass Servo.
2013-12-16T21:37:17.351Z,1387229837.351 [MassServo](INFO): Powering down
2013-12-16T21:37:17.747Z,1387229837.747 [DVL_micro](INFO): NQ1 requested
2013-12-16T21:37:17.747Z,1387229837.747 [DVL_micro](INFO): Cycling power to configure device.
2013-12-16T21:37:18.156Z,1387229838.156 [MassServo](DEBUG): Initializing EZServoServo.
2013-12-16T21:37:18.272Z,1387229838.272 [MassServo](DEBUG): Initializing MassServo.
2013-12-16T21:37:18.276Z,1387229838.276 [CBIT](INFO): Clearing failed state for component MassServo
2013-12-16T21:37:18.276Z,1387229838.276 [MassServo] No Fault, FailCount= 2
2013-12-16T21:37:19.750Z,1387229839.750 [DVL_micro](INFO): Opening uart, block timeout 10ths=20
2013-12-16T21:37:19.750Z,1387229839.750 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD1616 00 0

2013-12-16T21:37:20.655Z,1387229840.655 [MassServo](FAULT): Mass shifter EEPROM initialization uart error serial timeout
2013-12-16T21:37:20.655Z,1387229840.655 [MassServo] Communications Fault, FailCount= 3
2013-12-16T21:37:20.655Z,1387229840.655 [MassServo](ERROR): Communications Fault
2013-12-16T21:37:20.658Z,1387229840.658 [CBIT](ERROR): Communications Fault in component: MassServo
2013-12-16T21:37:20.696Z,1387229840.696 [MassServo](DEBUG): Uninitialize Mass Servo.
2013-12-16T21:37:20.696Z,1387229840.696 [MassServo](INFO): Powering down
2013-12-16T21:37:21.529Z,1387229841.529 [MassServo](DEBUG): Initializing EZServoServo.
2013-12-16T21:37:21.646Z,1387229841.646 [MassServo](DEBUG): Initializing MassServo.
2013-12-16T21:37:21.649Z,1387229841.649 [CBIT](INFO): Clearing failed state for component MassServo
2013-12-16T21:37:21.649Z,1387229841.649 [MassServo] No Fault, FailCount= 3
2013-12-16T21:37:21.757Z,1387229841.757 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:37:21.757Z,1387229841.757 [DVL_micro](INFO): Enabling NQ1 output
2013-12-16T21:37:21.757Z,1387229841.757 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD0505 01 1

2013-12-16T21:37:23.760Z,1387229843.760 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:37:23.760Z,1387229843.760 [DVL_micro](INFO): Querying output modes
2013-12-16T21:37:23.760Z,1387229843.760 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD0606

2013-12-16T21:37:24.024Z,1387229844.024 [MassServo](FAULT): Mass shifter EEPROM initialization uart error serial timeout
2013-12-16T21:37:24.024Z,1387229844.024 [MassServo] Communications Fault, FailCount= 4
2013-12-16T21:37:24.025Z,1387229844.025 [MassServo](ERROR): Communications Fault
2013-12-16T21:37:24.028Z,1387229844.028 [CBIT](ERROR): Communications Fault in component: MassServo
2013-12-16T21:37:24.069Z,1387229844.069 [MassServo](DEBUG): Uninitialize Mass Servo.
2013-12-16T21:37:24.069Z,1387229844.069 [MassServo](INFO): Powering down
2013-12-16T21:37:24.879Z,1387229844.879 [MassServo](DEBUG): Initializing EZServoServo.
2013-12-16T21:37:24.995Z,1387229844.995 [MassServo](DEBUG): Initializing MassServo.
2013-12-16T21:37:24.999Z,1387229844.999 [CBIT](INFO): Clearing failed state for component MassServo
2013-12-16T21:37:24.999Z,1387229844.999 [MassServo] No Fault, FailCount= 4
2013-12-16T21:37:25.767Z,1387229845.767 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:37:25.767Z,1387229845.767 [DVL_micro](INFO): Output Modes: No Response
2013-12-16T21:37:25.767Z,1387229845.767 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD2525

2013-12-16T21:37:27.377Z,1387229847.377 [MassServo](FAULT): Mass shifter EEPROM initialization uart error serial timeout
2013-12-16T21:37:27.378Z,1387229847.378 [MassServo] Communications Fault, FailCount= 5
2013-12-16T21:37:27.378Z,1387229847.378 [MassServo](ERROR): Communications Fault
2013-12-16T21:37:27.381Z,1387229847.381 [CBIT](ERROR): Communications Fault in component: MassServo
2013-12-16T21:37:27.381Z,1387229847.381 [CBIT](CRITICAL): Communications Fault in component: MassServo
2013-12-16T21:37:27.454Z,1387229847.454 [MassServo](DEBUG): Uninitialize Mass Servo.
2013-12-16T21:37:27.454Z,1387229847.454 [MassServo](INFO): Powering down
2013-12-16T21:37:27.778Z,1387229847.778 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:37:28.232Z,1387229848.232 [MassServo](DEBUG): Initializing EZServoServo.
2013-12-16T21:37:28.352Z,1387229848.352 [MassServo](DEBUG): Initializing MassServo.
2013-12-16T21:37:29.798Z,1387229849.798 [DVL_micro](INFO): NQ1 requested
2013-12-16T21:37:29.798Z,1387229849.798 [DVL_micro](INFO): Cycling power to configure device.
2013-12-16T21:37:31.801Z,1387229851.801 [DVL_micro](INFO): Opening uart, block timeout 10ths=20
2013-12-16T21:37:31.801Z,1387229851.801 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD1616 00 0

2013-12-16T21:37:32.998Z,1387229852.998 [DataOverHttps](INFO): tcpConnect
2013-12-16T21:37:33.399Z,1387229853.399 [DataOverHttps](INFO): tcpConnecting
2013-12-16T21:37:33.399Z,1387229853.399 [DataOverHttps](INFO): sslConnect
2013-12-16T21:37:33.400Z,1387229853.400 [DataOverHttps](INFO): sslConnecting
2013-12-16T21:37:33.799Z,1387229853.799 [DataOverHttps](INFO): sslConnecting
2013-12-16T21:37:33.811Z,1387229853.811 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:37:33.812Z,1387229853.812 [DVL_micro](INFO): Enabling NQ1 output
2013-12-16T21:37:33.812Z,1387229853.812 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD0505 01 1

2013-12-16T21:37:34.344Z,1387229854.344 [DataOverHttps](INFO): sslConnecting
2013-12-16T21:37:34.350Z,1387229854.350 [DataOverHttps](INFO): dataWrite
2013-12-16T21:37:34.350Z,1387229854.350 [DataOverHttps](INFO): dataWriting
2013-12-16T21:37:34.351Z,1387229854.351 [DataOverHttps](INFO): Wrote 206 bytes.
2013-12-16T21:37:34.733Z,1387229854.733 [DataOverHttps](INFO): dataRead
2013-12-16T21:37:35.133Z,1387229855.133 [DataOverHttps](INFO): dataRead
2013-12-16T21:37:35.134Z,1387229855.134 [DataOverHttps](INFO): disconnect
2013-12-16T21:37:35.819Z,1387229855.819 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:37:35.819Z,1387229855.819 [DVL_micro](INFO): Querying output modes
2013-12-16T21:37:35.819Z,1387229855.819 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD0606

2013-12-16T21:37:37.830Z,1387229857.830 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:37:37.830Z,1387229857.830 [DVL_micro](INFO): Output Modes: No Response
2013-12-16T21:37:37.830Z,1387229857.830 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD2525

2013-12-16T21:37:39.837Z,1387229859.837 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:37:41.840Z,1387229861.840 [DVL_micro](INFO): NQ1 requested
2013-12-16T21:37:41.841Z,1387229861.841 [DVL_micro](INFO): Cycling power to configure device.
2013-12-16T21:37:43.843Z,1387229863.843 [DVL_micro](INFO): Opening uart, block timeout 10ths=20
2013-12-16T21:37:43.844Z,1387229863.844 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD1616 00 0

2013-12-16T21:37:45.846Z,1387229865.846 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:37:45.846Z,1387229865.846 [DVL_micro](INFO): Enabling NQ1 output
2013-12-16T21:37:45.846Z,1387229865.846 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD0505 01 1

2013-12-16T21:37:47.853Z,1387229867.853 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:37:47.853Z,1387229867.853 [DVL_micro](INFO): Querying output modes
2013-12-16T21:37:47.853Z,1387229867.853 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD0606

2013-12-16T21:37:49.864Z,1387229869.864 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:37:49.864Z,1387229869.864 [DVL_micro](INFO): Output Modes: No Response
2013-12-16T21:37:49.865Z,1387229869.865 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD2525

2013-12-16T21:37:51.875Z,1387229871.875 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:37:53.879Z,1387229873.879 [DVL_micro](INFO): NQ1 requested
2013-12-16T21:37:53.879Z,1387229873.879 [DVL_micro](INFO): Cycling power to configure device.
2013-12-16T21:37:55.882Z,1387229875.882 [DVL_micro](INFO): Opening uart, block timeout 10ths=20
2013-12-16T21:37:55.882Z,1387229875.882 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD1616 00 0

2013-12-16T21:37:57.885Z,1387229877.885 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:37:57.885Z,1387229877.885 [DVL_micro](INFO): Enabling NQ1 output
2013-12-16T21:37:57.885Z,1387229877.885 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD0505 01 1

2013-12-16T21:37:59.892Z,1387229879.892 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:37:59.892Z,1387229879.892 [DVL_micro](INFO): Querying output modes
2013-12-16T21:37:59.892Z,1387229879.892 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD0606

2013-12-16T21:38:01.904Z,1387229881.904 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:38:01.904Z,1387229881.904 [DVL_micro](INFO): Output Modes: No Response
2013-12-16T21:38:01.905Z,1387229881.905 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD2525

2013-12-16T21:38:03.132Z,1387229883.132 [DataOverHttps](INFO): tcpConnect
2013-12-16T21:38:03.533Z,1387229883.533 [DataOverHttps](INFO): tcpConnecting
2013-12-16T21:38:03.533Z,1387229883.533 [DataOverHttps](INFO): sslConnect
2013-12-16T21:38:03.535Z,1387229883.535 [DataOverHttps](INFO): sslConnecting
2013-12-16T21:38:03.914Z,1387229883.914 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:38:03.934Z,1387229883.934 [DataOverHttps](INFO): sslConnecting
2013-12-16T21:38:04.448Z,1387229884.448 [DataOverHttps](INFO): sslConnecting
2013-12-16T21:38:04.450Z,1387229884.450 [DataOverHttps](INFO): dataWrite
2013-12-16T21:38:04.450Z,1387229884.450 [DataOverHttps](INFO): dataWriting
2013-12-16T21:38:04.452Z,1387229884.452 [DataOverHttps](INFO): Wrote 206 bytes.
2013-12-16T21:38:04.851Z,1387229884.851 [DataOverHttps](INFO): dataRead
2013-12-16T21:38:05.252Z,1387229885.252 [DataOverHttps](INFO): dataRead
2013-12-16T21:38:05.252Z,1387229885.252 [DataOverHttps](INFO): disconnect
2013-12-16T21:38:05.926Z,1387229885.926 [DVL_micro](INFO): NQ1 requested
2013-12-16T21:38:05.926Z,1387229885.926 [DVL_micro](INFO): Cycling power to configure device.
2013-12-16T21:38:07.929Z,1387229887.929 [DVL_micro](INFO): Opening uart, block timeout 10ths=20
2013-12-16T21:38:07.929Z,1387229887.929 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD1616 00 0

2013-12-16T21:38:09.935Z,1387229889.935 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:38:09.936Z,1387229889.936 [DVL_micro](INFO): Enabling NQ1 output
2013-12-16T21:38:09.936Z,1387229889.936 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD0505 01 1

2013-12-16T21:38:11.939Z,1387229891.939 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:38:11.939Z,1387229891.939 [DVL_micro](INFO): Querying output modes
2013-12-16T21:38:11.939Z,1387229891.939 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD0606

2013-12-16T21:38:13.950Z,1387229893.950 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:38:13.950Z,1387229893.950 [DVL_micro](INFO): Output Modes: No Response
2013-12-16T21:38:13.950Z,1387229893.950 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD2525

2013-12-16T21:38:15.961Z,1387229895.961 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:38:17.964Z,1387229897.964 [DVL_micro](INFO): NQ1 requested
2013-12-16T21:38:17.965Z,1387229897.965 [DVL_micro](INFO): Cycling power to configure device.
2013-12-16T21:38:19.967Z,1387229899.967 [DVL_micro](INFO): Opening uart, block timeout 10ths=20
2013-12-16T21:38:19.968Z,1387229899.968 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD1616 00 0

2013-12-16T21:38:21.974Z,1387229901.974 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:38:21.974Z,1387229901.974 [DVL_micro](INFO): Enabling NQ1 output
2013-12-16T21:38:21.974Z,1387229901.974 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD0505 01 1

2013-12-16T21:38:23.985Z,1387229903.985 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:38:23.985Z,1387229903.985 [DVL_micro](INFO): Querying output modes
2013-12-16T21:38:23.985Z,1387229903.985 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD0606

2013-12-16T21:38:25.996Z,1387229905.996 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:38:25.996Z,1387229905.996 [DVL_micro](INFO): Output Modes: No Response
2013-12-16T21:38:25.997Z,1387229905.997 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD2525

2013-12-16T21:38:27.999Z,1387229907.999 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:38:30.011Z,1387229910.011 [DVL_micro](INFO): NQ1 requested
2013-12-16T21:38:30.011Z,1387229910.011 [DVL_micro](INFO): Cycling power to configure device.
2013-12-16T21:38:32.014Z,1387229912.014 [DVL_micro](INFO): Opening uart, block timeout 10ths=20
2013-12-16T21:38:32.014Z,1387229912.014 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD1616 00 0

2013-12-16T21:38:33.251Z,1387229913.251 [DataOverHttps](INFO): tcpConnect
2013-12-16T21:38:33.653Z,1387229913.653 [DataOverHttps](INFO): tcpConnecting
2013-12-16T21:38:33.653Z,1387229913.653 [DataOverHttps](INFO): sslConnect
2013-12-16T21:38:33.656Z,1387229913.656 [DataOverHttps](INFO): sslConnecting
2013-12-16T21:38:34.025Z,1387229914.025 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:38:34.025Z,1387229914.025 [DVL_micro](INFO): Enabling NQ1 output
2013-12-16T21:38:34.025Z,1387229914.025 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD0505 01 1

2013-12-16T21:38:34.048Z,1387229914.048 [DataOverHttps](INFO): sslConnecting
2013-12-16T21:38:34.568Z,1387229914.568 [DataOverHttps](INFO): sslConnecting
2013-12-16T21:38:34.570Z,1387229914.570 [DataOverHttps](INFO): dataWrite
2013-12-16T21:38:34.570Z,1387229914.570 [DataOverHttps](INFO): dataWriting
2013-12-16T21:38:34.571Z,1387229914.571 [DataOverHttps](INFO): Wrote 206 bytes.
2013-12-16T21:38:34.970Z,1387229914.970 [DataOverHttps](INFO): dataRead
2013-12-16T21:38:35.370Z,1387229915.370 [DataOverHttps](INFO): dataRead
2013-12-16T21:38:35.371Z,1387229915.371 [DataOverHttps](INFO): disconnect
2013-12-16T21:38:36.028Z,1387229916.028 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:38:36.028Z,1387229916.028 [DVL_micro](INFO): Querying output modes
2013-12-16T21:38:36.028Z,1387229916.028 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD0606

2013-12-16T21:38:38.039Z,1387229918.039 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:38:38.039Z,1387229918.039 [DVL_micro](INFO): Output Modes: No Response
2013-12-16T21:38:38.039Z,1387229918.039 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD2525

2013-12-16T21:38:40.050Z,1387229920.050 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:38:42.054Z,1387229922.054 [DVL_micro](INFO): NQ1 requested
2013-12-16T21:38:42.054Z,1387229922.054 [DVL_micro](INFO): Cycling power to configure device.
2013-12-16T21:38:44.057Z,1387229924.057 [DVL_micro](INFO): Opening uart, block timeout 10ths=20
2013-12-16T21:38:44.057Z,1387229924.057 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD1616 00 0

2013-12-16T21:38:45.832Z,1387229925.832 [CBIT](INFO): Clearing failed count for component NAL9602
2013-12-16T21:38:45.832Z,1387229925.832 [NAL9602] No Fault, FailCount= 2
2013-12-16T21:38:46.063Z,1387229926.063 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:38:46.064Z,1387229926.064 [DVL_micro](INFO): Enabling NQ1 output
2013-12-16T21:38:46.064Z,1387229926.064 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD0505 01 1

2013-12-16T21:38:46.174Z,1387229926.174 [NAL9602](INFO): Powering up NAL9602
2013-12-16T21:38:48.075Z,1387229928.075 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:38:48.075Z,1387229928.075 [DVL_micro](INFO): Querying output modes
2013-12-16T21:38:48.075Z,1387229928.075 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD0606

2013-12-16T21:38:50.078Z,1387229930.078 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:38:50.078Z,1387229930.078 [DVL_micro](INFO): Output Modes: No Response
2013-12-16T21:38:50.078Z,1387229930.078 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD2525

2013-12-16T21:38:52.089Z,1387229932.089 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:38:54.103Z,1387229934.103 [DVL_micro](INFO): NQ1 requested
2013-12-16T21:38:54.103Z,1387229934.103 [DVL_micro](INFO): Cycling power to configure device.
2013-12-16T21:38:56.107Z,1387229936.107 [DVL_micro](INFO): Opening uart, block timeout 10ths=20
2013-12-16T21:38:56.108Z,1387229936.108 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD1616 00 0

2013-12-16T21:38:58.118Z,1387229938.118 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:38:58.118Z,1387229938.118 [DVL_micro](INFO): Enabling NQ1 output
2013-12-16T21:38:58.118Z,1387229938.118 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD0505 01 1

2013-12-16T21:38:58.991Z,1387229938.991 [NAL9602](ERROR): NAL9602 initialize uart error: serial timeout
2013-12-16T21:38:58.992Z,1387229938.992 [NAL9602] Communications Fault, FailCount= 1
2013-12-16T21:38:58.992Z,1387229938.992 [NAL9602](ERROR): Communications Fault
2013-12-16T21:38:59.029Z,1387229939.029 [CBIT](ERROR): Communications Fault in component: NAL9602
2013-12-16T21:38:59.093Z,1387229939.093 [NAL9602](INFO): Powering down
2013-12-16T21:38:59.869Z,1387229939.869 [CBIT](INFO): Clearing failed state for component NAL9602
2013-12-16T21:38:59.869Z,1387229939.869 [NAL9602] No Fault, FailCount= 1
2013-12-16T21:39:00.129Z,1387229940.129 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:39:00.129Z,1387229940.129 [DVL_micro](INFO): Querying output modes
2013-12-16T21:39:00.130Z,1387229940.130 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD0606

2013-12-16T21:39:02.136Z,1387229942.136 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:39:02.137Z,1387229942.137 [DVL_micro](INFO): Output Modes: No Response
2013-12-16T21:39:02.137Z,1387229942.137 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD2525

2013-12-16T21:39:02.260Z,1387229942.260 [Default:CallIridium] Running Loop=1
2013-12-16T21:39:02.260Z,1387229942.260 [Default:CallIridium](INFO): Aggregate::initialize Default:CallIridium
2013-12-16T21:39:02.260Z,1387229942.260 [Default:CallIridium:A] Running Loop=1
2013-12-16T21:39:02.260Z,1387229942.260 [Default:CallIridium:A] Stopped
2013-12-16T21:39:02.260Z,1387229942.260 [Default:CallIridium:B] Running Loop=1
2013-12-16T21:39:02.261Z,1387229942.261 [Default:CallIridium:B](INFO): Aggregate::initialize Default:CallIridium:B
2013-12-16T21:39:02.661Z,1387229942.661 [Default:Iridium] Running Loop=1
2013-12-16T21:39:02.661Z,1387229942.661 [Default:Iridium](INFO): Aggregate::initialize Default:Iridium
2013-12-16T21:39:02.661Z,1387229942.661 [Default:Iridium:A.SetSpeed] Running Loop=1
2013-12-16T21:39:02.661Z,1387229942.661 [Default:Iridium:A.SetSpeed](DEBUG): Initialize.
2013-12-16T21:39:02.662Z,1387229942.662 [Default:Iridium:B.GoToSurface] Running Loop=1
2013-12-16T21:39:02.662Z,1387229942.662 [Default:Iridium:B.GoToSurface](DEBUG): Initialize GoToSurfaceComponent.
2013-12-16T21:39:02.662Z,1387229942.662 [Default:Iridium:B.GoToSurface] Stopped
2013-12-16T21:39:02.662Z,1387229942.662 [Default:Iridium:B.GoToSurface](DEBUG): Uninitialize GoToSurfaceComponent.
2013-12-16T21:39:02.663Z,1387229942.663 [Default:Iridium:Read_Iridium] Running Loop=1
2013-12-16T21:39:03.753Z,1387229943.753 [DataOverHttps](INFO): tcpConnect
2013-12-16T21:39:03.884Z,1387229943.884 [DataOverHttps](INFO): tcpConnecting
2013-12-16T21:39:03.884Z,1387229943.884 [DataOverHttps](INFO): sslConnect
2013-12-16T21:39:03.885Z,1387229943.885 [DataOverHttps](INFO): sslConnecting
2013-12-16T21:39:04.139Z,1387229944.139 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:39:04.280Z,1387229944.280 [DataOverHttps](INFO): sslConnecting
2013-12-16T21:39:04.756Z,1387229944.756 [NAL9602](INFO): Powering up NAL9602
2013-12-16T21:39:04.794Z,1387229944.794 [DataOverHttps](INFO): sslConnecting
2013-12-16T21:39:04.796Z,1387229944.796 [DataOverHttps](INFO): dataWrite
2013-12-16T21:39:04.798Z,1387229944.798 [DataOverHttps](INFO): encoded 365 bytes: %5d%00%00%04%00%09%01%00%00%00%00%00%00%00%15%1d%80%03%0cVb%02T%99%fc%28a%29%c8%01N%e34%3aj%085%60%e0n_Z%07b%2c%8f%13%f0G%7b%be%5e%b3Vh%dc%a1%1d%0c%0b%b1%ec%d9%c0%b2%8cCa%fb%8f%8e%c8%2c%24%03%84%f7%7d%1f%8a%b9%27%fb%09L%abd%c7%d1%25%df%c5%ff%18vA%a0W%a4%d4%40%a3%cd%b3%0c%83+7%10%94%ec%d0%bc%18%c6%a2%9a%01%16%f8%f2%60y%b7oV%16B%26Z%84%90F%b9%83%3c%ce%290%fe%80%5bh
2013-12-16T21:39:04.798Z,1387229944.798 [DataOverHttps](INFO): Sending 143 bytes from file Logs/20131216T211549/Courier0020.lzma
2013-12-16T21:39:04.799Z,1387229944.799 [DataOverHttps](INFO): dataWriting
2013-12-16T21:39:04.829Z,1387229944.829 [DataOverHttps](INFO): Wrote 638 bytes.
2013-12-16T21:39:05.196Z,1387229945.196 [DataOverHttps](INFO): dataRead
2013-12-16T21:39:05.597Z,1387229945.597 [DataOverHttps](INFO): dataRead
2013-12-16T21:39:05.599Z,1387229945.599 [DataOverHttps](INFO): Moved sent file to Logs/20131216T211549/Courier0020.lzma.bak
2013-12-16T21:39:05.599Z,1387229945.599 [DataOverHttps](INFO): SBD MOMSN=271476
2013-12-16T21:39:05.599Z,1387229945.599 [DataOverHttps](INFO): disconnect
2013-12-16T21:39:06.151Z,1387229946.151 [DVL_micro](INFO): NQ1 requested
2013-12-16T21:39:06.151Z,1387229946.151 [DVL_micro](INFO): Cycling power to configure device.
2013-12-16T21:39:06.534Z,1387229946.534 [DataOverHttps](INFO): tcpConnect
2013-12-16T21:39:06.573Z,1387229946.573 [DataOverHttps](INFO): tcpConnecting
2013-12-16T21:39:06.573Z,1387229946.573 [DataOverHttps](INFO): sslConnect
2013-12-16T21:39:06.574Z,1387229946.574 [DataOverHttps](INFO): sslConnecting
2013-12-16T21:39:06.976Z,1387229946.976 [DataOverHttps](INFO): sslConnecting
2013-12-16T21:39:07.535Z,1387229947.535 [DataOverHttps](INFO): sslConnecting
2013-12-16T21:39:07.538Z,1387229947.538 [DataOverHttps](INFO): dataWrite
2013-12-16T21:39:07.540Z,1387229947.540 [DataOverHttps](INFO): encoded 480 bytes: %5d%00%00%04%00%15%02%00%00%00%00%00%00%00%15%1d%80%03%0cVb%02%a9%bb1%d2q%7fIM%d1%5c%f3%3ejc%10%b4%3f%ab%5e%b9%17R%a8O%f2%b0%08%f7t%0d%1e%06Q%00%8d%98%ef%00O%88L%fbu%af%15%b0%dby4%e7%2aYX%f0n%d6%28%81%0f%0f%0a%0a%feV%60%ddo%0eX%7b%dd%40%e5%d4%d7N%be2%81%d7Y%15%22w%25%bd%ec%b9-9%f1%b1%86%86%fb%93%8c%fd%f9%f4%ed3%9es%b4D%d5V%cd%90JB%04%a04%c1%9at%98j%fb%c0%10%bd%94S%19c%97_%ca%dc%00e%c4u%03Z%eeiY%a2%27%e1%40%ce%d9%2bo%cb%5e%1b%aa%89dE%db%2b%0e%84n%caCs%bd%033%f4%8eP%b1%d3%0f%00
2013-12-16T21:39:07.541Z,1387229947.541 [DataOverHttps](INFO): Sending 196 bytes from file Logs/20131216T211549/Express0021.lzma
2013-12-16T21:39:07.541Z,1387229947.541 [DataOverHttps](INFO): dataWriting
2013-12-16T21:39:07.543Z,1387229947.543 [DataOverHttps](INFO): Wrote 753 bytes.
2013-12-16T21:39:07.907Z,1387229947.907 [DataOverHttps](INFO): dataRead
2013-12-16T21:39:08.154Z,1387229948.154 [DVL_micro](INFO): Opening uart, block timeout 10ths=20
2013-12-16T21:39:08.154Z,1387229948.154 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD1616 00 0

2013-12-16T21:39:08.305Z,1387229948.305 [DataOverHttps](INFO): dataRead
2013-12-16T21:39:08.307Z,1387229948.307 [DataOverHttps](INFO): Moved sent file to Logs/20131216T211549/Express0021.lzma.bak
2013-12-16T21:39:08.307Z,1387229948.307 [DataOverHttps](INFO): SBD MOMSN=271483
2013-12-16T21:39:08.307Z,1387229948.307 [DataOverHttps](INFO): disconnect
2013-12-16T21:39:09.245Z,1387229949.245 [DataOverHttps](INFO): tcpConnect
2013-12-16T21:39:10.165Z,1387229950.165 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:39:10.165Z,1387229950.165 [DVL_micro](INFO): Enabling NQ1 output
2013-12-16T21:39:10.165Z,1387229950.165 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD0505 01 1

2013-12-16T21:39:12.176Z,1387229952.176 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:39:12.176Z,1387229952.176 [DVL_micro](INFO): Querying output modes
2013-12-16T21:39:12.176Z,1387229952.176 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD0606

2013-12-16T21:39:12.862Z,1387229952.862 [Default:Iridium:Read_Iridium] Stopped
2013-12-16T21:39:12.862Z,1387229952.862 [Default:Iridium](INFO): Completed Default:Iridium
2013-12-16T21:39:12.863Z,1387229952.863 [Default:Iridium] Stopped
2013-12-16T21:39:12.863Z,1387229952.863 [Default:Iridium](INFO): Aggregate::uninitialize Default:Iridium
2013-12-16T21:39:12.863Z,1387229952.863 [Default:Iridium:A.SetSpeed] Stopped
2013-12-16T21:39:12.863Z,1387229952.863 [Default:Iridium:A.SetSpeed](DEBUG): Uninitialize.
2013-12-16T21:39:12.979Z,1387229952.979 [DataOverHttps](INFO): tcpConnecting
2013-12-16T21:39:12.979Z,1387229952.979 [DataOverHttps](INFO): sslConnect
2013-12-16T21:39:12.980Z,1387229952.980 [DataOverHttps](INFO): sslConnecting
2013-12-16T21:39:12.000Z,1387229953.000 [Default:CallIridium:B](INFO): Completed Default:CallIridium:B
2013-12-16T21:39:12.000Z,1387229953.000 [Default:CallIridium:B] Stopped
2013-12-16T21:39:12.000Z,1387229953.000 [Default:CallIridium:B](INFO): Aggregate::uninitialize Default:CallIridium:B
2013-12-16T21:39:13.000Z,1387229953.000 [Default:CallIridium](INFO): Completed Default:CallIridium
2013-12-16T21:39:13.000Z,1387229953.000 [Default:CallIridium] Stopped
2013-12-16T21:39:13.000Z,1387229953.000 [Default:CallIridium](INFO): Aggregate::uninitialize Default:CallIridium
2013-12-16T21:39:13.285Z,1387229953.285 [DataOverHttps](INFO): sslConnecting
2013-12-16T21:39:13.800Z,1387229953.800 [DataOverHttps](INFO): sslConnecting
2013-12-16T21:39:13.802Z,1387229953.802 [DataOverHttps](INFO): dataWrite
2013-12-16T21:39:13.802Z,1387229953.802 [DataOverHttps](INFO): dataWriting
2013-12-16T21:39:13.819Z,1387229953.819 [DataOverHttps](INFO): Wrote 206 bytes.
2013-12-16T21:39:14.179Z,1387229954.179 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:39:14.179Z,1387229954.179 [DVL_micro](INFO): Output Modes: No Response
2013-12-16T21:39:14.179Z,1387229954.179 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD2525

2013-12-16T21:39:14.203Z,1387229954.203 [DataOverHttps](INFO): dataRead
2013-12-16T21:39:14.603Z,1387229954.603 [DataOverHttps](INFO): dataRead
2013-12-16T21:39:14.604Z,1387229954.604 [DataOverHttps](INFO): disconnect
2013-12-16T21:39:16.190Z,1387229956.190 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:39:17.432Z,1387229957.432 [NAL9602](ERROR): NAL9602 initialize uart error: serial timeout
2013-12-16T21:39:17.432Z,1387229957.432 [NAL9602] Communications Fault, FailCount= 2
2013-12-16T21:39:17.432Z,1387229957.432 [NAL9602](ERROR): Communications Fault
2013-12-16T21:39:17.461Z,1387229957.461 [CBIT](ERROR): Communications Fault in component: NAL9602
2013-12-16T21:39:17.461Z,1387229957.461 [CBIT](CRITICAL): Communications Fault in component: NAL9602
2013-12-16T21:39:17.530Z,1387229957.530 [NAL9602](INFO): Powering down
2013-12-16T21:39:18.203Z,1387229958.203 [DVL_micro](INFO): NQ1 requested
2013-12-16T21:39:18.203Z,1387229958.203 [DVL_micro](INFO): Cycling power to configure device.
2013-12-16T21:39:20.209Z,1387229960.209 [DVL_micro](INFO): Opening uart, block timeout 10ths=20
2013-12-16T21:39:20.209Z,1387229960.209 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD1616 00 0

2013-12-16T21:39:22.219Z,1387229962.219 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:39:22.220Z,1387229962.220 [DVL_micro](INFO): Enabling NQ1 output
2013-12-16T21:39:22.220Z,1387229962.220 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD0505 01 1

2013-12-16T21:39:24.231Z,1387229964.231 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:39:24.231Z,1387229964.231 [DVL_micro](INFO): Querying output modes
2013-12-16T21:39:24.231Z,1387229964.231 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD0606

2013-12-16T21:39:26.238Z,1387229966.238 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:39:26.238Z,1387229966.238 [DVL_micro](INFO): Output Modes: No Response
2013-12-16T21:39:26.238Z,1387229966.238 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD2525

2013-12-16T21:39:28.245Z,1387229968.245 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:39:30.252Z,1387229970.252 [DVL_micro](INFO): NQ1 requested
2013-12-16T21:39:30.253Z,1387229970.253 [DVL_micro](INFO): Cycling power to configure device.
2013-12-16T21:39:32.255Z,1387229972.255 [DVL_micro](INFO): Opening uart, block timeout 10ths=20
2013-12-16T21:39:32.256Z,1387229972.256 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD1616 00 0

2013-12-16T21:39:34.262Z,1387229974.262 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:39:34.262Z,1387229974.262 [DVL_micro](INFO): Enabling NQ1 output
2013-12-16T21:39:34.262Z,1387229974.262 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD0505 01 1

2013-12-16T21:39:36.277Z,1387229976.277 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:39:36.277Z,1387229976.277 [DVL_micro](INFO): Querying output modes
2013-12-16T21:39:36.277Z,1387229976.277 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD0606

2013-12-16T21:39:38.284Z,1387229978.284 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:39:38.285Z,1387229978.285 [DVL_micro](INFO): Output Modes: No Response
2013-12-16T21:39:38.285Z,1387229978.285 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD2525

2013-12-16T21:39:39.478Z,1387229979.478 [DataOverHttps](INFO): tcpConnect
2013-12-16T21:39:39.875Z,1387229979.875 [DataOverHttps](INFO): tcpConnecting
2013-12-16T21:39:39.875Z,1387229979.875 [DataOverHttps](INFO): sslConnect
2013-12-16T21:39:39.876Z,1387229979.876 [DataOverHttps](INFO): sslConnecting
2013-12-16T21:39:40.275Z,1387229980.275 [DataOverHttps](INFO): sslConnecting
2013-12-16T21:39:40.292Z,1387229980.292 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:39:40.789Z,1387229980.789 [DataOverHttps](INFO): sslConnecting
2013-12-16T21:39:40.791Z,1387229980.791 [DataOverHttps](INFO): dataWrite
2013-12-16T21:39:40.791Z,1387229980.791 [DataOverHttps](INFO): dataWriting
2013-12-16T21:39:40.793Z,1387229980.793 [DataOverHttps](INFO): Wrote 206 bytes.
2013-12-16T21:39:41.188Z,1387229981.188 [DataOverHttps](INFO): dataRead
2013-12-16T21:39:41.589Z,1387229981.589 [DataOverHttps](INFO): dataRead
2013-12-16T21:39:41.590Z,1387229981.590 [DataOverHttps](INFO): disconnect
2013-12-16T21:39:42.299Z,1387229982.299 [DVL_micro](INFO): NQ1 requested
2013-12-16T21:39:42.299Z,1387229982.299 [DVL_micro](INFO): Cycling power to configure device.
2013-12-16T21:39:44.302Z,1387229984.302 [DVL_micro](INFO): Opening uart, block timeout 10ths=20
2013-12-16T21:39:44.303Z,1387229984.303 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD1616 00 0

2013-12-16T21:39:46.313Z,1387229986.313 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:39:46.313Z,1387229986.313 [DVL_micro](INFO): Enabling NQ1 output
2013-12-16T21:39:46.313Z,1387229986.313 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD0505 01 1

2013-12-16T21:39:48.320Z,1387229988.320 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:39:48.320Z,1387229988.320 [DVL_micro](INFO): Querying output modes
2013-12-16T21:39:48.320Z,1387229988.320 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD0606

2013-12-16T21:39:50.323Z,1387229990.323 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:39:50.323Z,1387229990.323 [DVL_micro](INFO): Output Modes: No Response
2013-12-16T21:39:50.323Z,1387229990.323 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD2525

2013-12-16T21:39:52.334Z,1387229992.334 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:39:54.342Z,1387229994.342 [DVL_micro](INFO): NQ1 requested
2013-12-16T21:39:54.342Z,1387229994.342 [DVL_micro](INFO): Cycling power to configure device.
2013-12-16T21:39:56.345Z,1387229996.345 [DVL_micro](INFO): Opening uart, block timeout 10ths=20
2013-12-16T21:39:56.345Z,1387229996.345 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD1616 00 0

2013-12-16T21:39:58.347Z,1387229998.347 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:39:58.348Z,1387229998.348 [DVL_micro](INFO): Enabling NQ1 output
2013-12-16T21:39:58.348Z,1387229998.348 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD0505 01 1

2013-12-16T21:40:00.359Z,1387230000.359 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:40:00.359Z,1387230000.359 [DVL_micro](INFO): Querying output modes
2013-12-16T21:40:00.359Z,1387230000.359 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD0606

2013-12-16T21:40:02.370Z,1387230002.370 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:40:02.370Z,1387230002.370 [DVL_micro](INFO): Output Modes: No Response
2013-12-16T21:40:02.370Z,1387230002.370 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD2525

2013-12-16T21:40:04.397Z,1387230004.397 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:40:06.411Z,1387230006.411 [DVL_micro](INFO): NQ1 requested
2013-12-16T21:40:06.411Z,1387230006.411 [DVL_micro](INFO): Cycling power to configure device.
2013-12-16T21:40:08.416Z,1387230008.416 [DVL_micro](INFO): Opening uart, block timeout 10ths=20
2013-12-16T21:40:08.416Z,1387230008.416 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD1616 00 0

2013-12-16T21:40:09.588Z,1387230009.588 [DataOverHttps](INFO): tcpConnect
2013-12-16T21:40:09.989Z,1387230009.989 [DataOverHttps](INFO): tcpConnecting
2013-12-16T21:40:09.989Z,1387230009.989 [DataOverHttps](INFO): sslConnect
2013-12-16T21:40:09.991Z,1387230009.991 [DataOverHttps](INFO): sslConnecting
2013-12-16T21:40:10.390Z,1387230010.390 [DataOverHttps](INFO): sslConnecting
2013-12-16T21:40:10.422Z,1387230010.422 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:40:10.422Z,1387230010.422 [DVL_micro](INFO): Enabling NQ1 output
2013-12-16T21:40:10.423Z,1387230010.423 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD0505 01 1

2013-12-16T21:40:10.946Z,1387230010.946 [DataOverHttps](INFO): sslConnecting
2013-12-16T21:40:10.948Z,1387230010.948 [DataOverHttps](INFO): dataWrite
2013-12-16T21:40:10.949Z,1387230010.949 [DataOverHttps](INFO): dataWriting
2013-12-16T21:40:10.950Z,1387230010.950 [DataOverHttps](INFO): Wrote 206 bytes.
2013-12-16T21:40:11.348Z,1387230011.348 [DataOverHttps](INFO): dataRead
2013-12-16T21:40:11.750Z,1387230011.750 [DataOverHttps](INFO): dataRead
2013-12-16T21:40:11.751Z,1387230011.751 [DataOverHttps](INFO): disconnect
2013-12-16T21:40:12.433Z,1387230012.433 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:40:12.433Z,1387230012.433 [DVL_micro](INFO): Querying output modes
2013-12-16T21:40:12.434Z,1387230012.434 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD0606

2013-12-16T21:40:14.436Z,1387230014.436 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:40:14.437Z,1387230014.437 [DVL_micro](INFO): Output Modes: No Response
2013-12-16T21:40:14.437Z,1387230014.437 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD2525

2013-12-16T21:40:16.444Z,1387230016.444 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:40:18.447Z,1387230018.447 [DVL_micro](INFO): NQ1 requested
2013-12-16T21:40:18.447Z,1387230018.447 [DVL_micro](INFO): Cycling power to configure device.
2013-12-16T21:40:20.450Z,1387230020.450 [DVL_micro](INFO): Opening uart, block timeout 10ths=20
2013-12-16T21:40:20.450Z,1387230020.450 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD1616 00 0

2013-12-16T21:40:22.457Z,1387230022.457 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:40:22.457Z,1387230022.457 [DVL_micro](INFO): Enabling NQ1 output
2013-12-16T21:40:22.457Z,1387230022.457 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD0505 01 1

2013-12-16T21:40:24.460Z,1387230024.460 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:40:24.460Z,1387230024.460 [DVL_micro](INFO): Querying output modes
2013-12-16T21:40:24.460Z,1387230024.460 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD0606

2013-12-16T21:40:26.467Z,1387230026.467 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:40:26.467Z,1387230026.467 [DVL_micro](INFO): Output Modes: No Response
2013-12-16T21:40:26.467Z,1387230026.467 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD2525

2013-12-16T21:40:27.373Z,1387230027.373 [CBIT](INFO): Clearing failed count for component DAT
2013-12-16T21:40:27.373Z,1387230027.373 [DAT] No Fault, FailCount= 3
2013-12-16T21:40:27.760Z,1387230027.760 [DAT](INFO): Powering up
2013-12-16T21:40:27.760Z,1387230027.760 [DAT](DEBUG): Initializing DAT.
2013-12-16T21:40:28.474Z,1387230028.474 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:40:30.486Z,1387230030.486 [DVL_micro](INFO): NQ1 requested
2013-12-16T21:40:30.486Z,1387230030.486 [DVL_micro](INFO): Cycling power to configure device.
2013-12-16T21:40:32.489Z,1387230032.489 [DVL_micro](INFO): Opening uart, block timeout 10ths=20
2013-12-16T21:40:32.489Z,1387230032.489 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD1616 00 0

2013-12-16T21:40:34.496Z,1387230034.496 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:40:34.496Z,1387230034.496 [DVL_micro](INFO): Enabling NQ1 output
2013-12-16T21:40:34.496Z,1387230034.496 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD0505 01 1

2013-12-16T21:40:36.499Z,1387230036.499 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:40:36.499Z,1387230036.499 [DVL_micro](INFO): Querying output modes
2013-12-16T21:40:36.499Z,1387230036.499 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD0606

2013-12-16T21:40:38.506Z,1387230038.506 [DVL_micro](DEBUG): cmdResponse: 
2013-12-16T21:40:38.506Z,1387230038.506 [DVL_micro](INFO): Output Modes: No Response
2013-12-16T21:40:38.506Z,1387230038.506 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD2525

2013-12-16T21:40:39.750Z,1387230039.750 [DataOverHttps](INFO): tcpConnect
2013-12-16T21:40:40.148Z,1387230040.148 [DataOverHttps](INFO): tcpConnecting
2013-12-16T21:40:40.148Z,1387230040.148 [DataOverHttps](INFO): sslCo