daphne Path

trajectory

20130827T154330 [MissionManager]:Started mission Startup

20130827T154436 [CommandLine]:got command ibit

20130827T154436 [IBIT]:Beginning Initiated BIT

20130827T154436 [IBIT]:Beginning control surface checks.#

20130827T154436 [CBIT]:Beginning GF scan

20130827T154510 [NAL9602]:Failed to initiate SBD session. Error code: 2

20130827T154527 [IBIT]:Communications Status:#Fix Status: 1#Iridium Signal Strength: 1#Latitude: 36.802036 Longitude: -121.787201

20130827T154527 [IBIT]:batteryCapacityThreshold: 5.000000 Ah

20130827T154527 [IBIT]:batteryVoltageThreshold: 13.500000 V

20130827T154528 [IBIT]:bitPressureThreshold: 0.750000 psi

20130827T154531 [MissionManager]:Started mission Default

20130827T154542 [NAL9602]:Failed to initiate SBD session. Error code: 2

20130827T154623 [CommandLine]:got command ! chmod ugo-x /mnt/mmc/LRAUV/Tools/*.sh

20130827T154633 [CommandLine]:got command ! ls -l -h /mnt/mmc/LRAUV/Tools/

20130827T154633 [CommandLine]:total 36K#-rw-r--r-- 1 root root 592 May 30 23:10 disable-tools-on-vehicle.sh#-rw-r--r-- 1 root root 443 May 30 23:10 disableEmergency.sh#-rw-r--r-- 1 root root 203 May 30 23:10 disableWDT.sh#-rw-r--r-- 1 root root 756 Aug 23 2012 gfScan.sh#-rw-r--r-- 1 root root 225 May 30 23:10 keepAlive.sh#-rw-r--r-- 1 root root 631 May 30 23:10 loadControlOff.sh#-rw-r--r-- 1 root root 1.3K May 30 23:10 loadControlOn.sh#-rw-r--r-- 1 root root 246 Feb 27 19:02 thresh4A.sh#-rw-r--r-- 1 root root 123 May 30 23:10 toggleHeartbeat.sh#

20130827T154646 [CommandLine]:got command ibit

20130827T154647 [IBIT]:Beginning Initiated BIT

20130827T154647 [IBIT]:Beginning control surface checks.#

20130827T154647 [CBIT]:Beginning GF scan

20130827T154733 [IBIT]:Communications Status:#Fix Status: 1#Iridium Signal Strength: 3#Latitude: 36.802055 Longitude: -121.787224

20130827T154733 [IBIT]:batteryCapacityThreshold: 5.000000 Ah

20130827T154733 [IBIT]:batteryVoltageThreshold: 13.500000 V

20130827T154734 [IBIT]:bitPressureThreshold: 0.750000 psi

20130827T155309 [NAL9602]:Failed to initiate SBD session. Error code: 2

20130827T161926 [NAL9602]:Verify xmit timeout failure.

20130827T161927 [NAL9602]:Fill buffer uart error: serial timeout

20130827T161927 [NAL9602]:Failed to receive READY. Modem reported:

20130827T161958 [NAL9602]:Queried for signal strength and failed to receive response. serial timeout

20130827T165814 [Depth_Keller]:Pressure reading out of range: 1830.501221 decibar

20130827T170453 [NAL9602]:Verify xmit timeout failure.

20130827T170453 [NAL9602]:Fill buffer uart error: serial timeout

20130827T170453 [NAL9602]:Failed to receive READY. Modem reported:

20130827T170531 [Depth_Keller]:Pressure reading out of range: 1830.464600 decibar

20130827T172338 [Depth_Keller]:Pressure reading out of range: 1830.436646 decibar

20130827T173522 [NAL9602]:NAL9602 initialize uart error: serial timeout

20130827T173522 [NAL9602]:Communications Fault

20130827T173522 [CBIT]:Communications Fault in component: NAL9602

20130827T174308 [NAL9602]:Verify xmit timeout failure.

20130827T204833 [CommandLine]:got command failComponent

20130827T204833 [CommandLine]:Failed components:

20130827T204833 [CommandLine]:No failed Components.

20130827T205226 [CommandLine]:got command restart application