2012-09-19T15:03:55.881Z,1348067035.881 [Supervisor](DEBUG): Initializing supervisor.
2012-09-19T15:03:55.890Z,1348067035.890 [SyncHandler](DEBUG): Created PCaller Thread at 4033B4E0
2012-09-19T15:03:55.891Z,1348067035.891 [ComponentRegistry](DEBUG): Component "controlThread" handled in its own thread.
2012-09-19T15:03:55.894Z,1348067035.894 [controlThread ThreadHandler](DEBUG): Created PCaller Thread at 4036B4E0
2012-09-19T15:03:55.897Z,1348067035.897 [ComponentRegistry](DEBUG): SyncComponent "CycleStarter" handled in the control thread.
2012-09-19T15:03:55.908Z,1348067035.908 [ComponentRegistry](DEBUG): Component "CommandLine" handled in its own thread.
2012-09-19T15:03:55.910Z,1348067035.910 [CommandLine ThreadHandler](DEBUG): Created PCaller Thread at 4039B4E0
2012-09-19T15:03:55.911Z,1348067035.911 [ComponentRegistry](DEBUG): SyncComponent "logger" handled in the control thread.
2012-09-19T15:03:55.912Z,1348067035.912 [Supervisor](INFO): Looking for Config files in directory: Config/
2012-09-19T15:03:55.915Z,1348067035.915 [Supervisor](INFO): Opening Config file at: Config/vehicle.cfg
2012-09-19T15:03:56.234Z,1348067036.234 [ComponentRegistry](DEBUG): Loaded Config Component "Config/vehicle
2012-09-19T15:03:56.236Z,1348067036.236 [Supervisor](INFO): Opening Config file at: Config/Sensor.cfg
2012-09-19T15:03:56.435Z,1348067036.435 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Sensor
2012-09-19T15:03:56.436Z,1348067036.436 [Supervisor](INFO): Opening Config file at: Config/Sample.cfg
2012-09-19T15:03:56.534Z,1348067036.534 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Sample
2012-09-19T15:03:56.536Z,1348067036.536 [Supervisor](INFO): Opening Config file at: Config/logger.cfg
2012-09-19T15:03:56.759Z,1348067036.759 [ComponentRegistry](DEBUG): Loaded Config Component "Config/logger
2012-09-19T15:03:56.760Z,1348067036.760 [Supervisor](INFO): Opening Config file at: Config/BIT.cfg
2012-09-19T15:03:56.914Z,1348067036.914 [ComponentRegistry](DEBUG): Loaded Config Component "Config/BIT
2012-09-19T15:03:56.916Z,1348067036.916 [Supervisor](INFO): Opening Config file at: Config/Servo.cfg
2012-09-19T15:03:57.183Z,1348067037.183 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Servo
2012-09-19T15:03:57.184Z,1348067037.184 [Supervisor](INFO): Opening Config file at: Config/Science.cfg
2012-09-19T15:03:57.379Z,1348067037.379 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Science
2012-09-19T15:03:57.381Z,1348067037.381 [Supervisor](INFO): Opening Config file at: Config/Control.cfg
2012-09-19T15:03:57.674Z,1348067037.674 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Control
2012-09-19T15:03:57.676Z,1348067037.676 [Supervisor](INFO): Opening Config file at: Config/workSite.cfg
2012-09-19T15:03:57.787Z,1348067037.787 [ComponentRegistry](DEBUG): Loaded Config Component "Config/workSite
2012-09-19T15:03:57.788Z,1348067037.788 [Supervisor](INFO): Opening Config file at: Config/Simulator.cfg
2012-09-19T15:03:58.260Z,1348067038.260 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Simulator
2012-09-19T15:03:58.260Z,1348067038.260 [Supervisor](INFO): Opening Config file at: Config/Derivation.cfg
2012-09-19T15:03:58.391Z,1348067038.391 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Derivation
2012-09-19T15:03:58.392Z,1348067038.392 [Supervisor](INFO): Opening Config file at: Config/Guidance.cfg
2012-09-19T15:03:58.487Z,1348067038.487 [Supervisor](INFO): Looking for Config files in directory: Config/lrauv-daphne/
2012-09-19T15:03:58.491Z,1348067038.491 [Supervisor](INFO): Opening Config file at: Config/lrauv-daphne/vehicle.cfg
2012-09-19T15:03:58.602Z,1348067038.602 [Supervisor](INFO): Opening Config file at: Config/lrauv-daphne/Sensor.cfg
2012-09-19T15:03:58.750Z,1348067038.750 [Supervisor](INFO): Opening Config file at: Config/lrauv-daphne/logger.cfg
2012-09-19T15:03:58.846Z,1348067038.846 [Supervisor](INFO): Opening Config file at: Config/lrauv-daphne/BIT.cfg
2012-09-19T15:03:58.958Z,1348067038.958 [Supervisor](INFO): Opening Config file at: Config/lrauv-daphne/Servo.cfg
2012-09-19T15:03:59.072Z,1348067039.072 [Supervisor](INFO): Opening Config file at: Config/lrauv-daphne/Science.cfg
2012-09-19T15:03:59.207Z,1348067039.207 [Supervisor](INFO): Opening Config file at: Config/lrauv-daphne/Control.cfg
2012-09-19T15:03:59.310Z,1348067039.310 [Supervisor](INFO): Opening Config file at: Config/lrauv-daphne/Simulator.cfg
2012-09-19T15:03:59.468Z,1348067039.468 [Supervisor](FAULT): Ignoring configuration overrides from Data/config.db
2012-09-19T15:03:59.604Z,1348067039.604 [Module Loader](DEBUG): Loading Module at Modules/Simulator.so
2012-09-19T15:03:59.787Z,1348067039.787 [InternalSim] Loaded
2012-09-19T15:03:59.788Z,1348067039.788 [ComponentRegistry](DEBUG): SyncComponent "InternalSim" handled in the control thread.
2012-09-19T15:03:59.789Z,1348067039.789 [Module Loader](DEBUG): Loaded Module: Simulator (This is the module containing the Simulator)
2012-09-19T15:03:59.789Z,1348067039.789 [Module Loader](DEBUG): Loading Module at Modules/BIT.so
2012-09-19T15:03:59.873Z,1348067039.873 [SBIT](DEBUG): Construct Startup Built In Test.
2012-09-19T15:03:59.887Z,1348067039.886 [SBIT] Loaded
2012-09-19T15:03:59.887Z,1348067039.887 [ComponentRegistry](DEBUG): SyncComponent "SBIT" handled in the control thread.
2012-09-19T15:03:59.888Z,1348067039.888 [IBIT](DEBUG): Construct Initiated Built In Test.
2012-09-19T15:03:59.919Z,1348067039.919 [IBIT] Loaded
2012-09-19T15:03:59.919Z,1348067039.919 [ComponentRegistry](DEBUG): SyncComponent "IBIT" handled in the control thread.
2012-09-19T15:03:59.923Z,1348067039.923 [CBIT](DEBUG): Construct CBIT Built In Test.
2012-09-19T15:04:00.048Z,1348067040.048 [CBIT] Loaded
2012-09-19T15:04:00.049Z,1348067040.049 [ComponentRegistry](DEBUG): SyncComponent "CBIT" handled in the control thread.
2012-09-19T15:04:00.049Z,1348067040.049 [Module Loader](DEBUG): Loaded Module: BIT (Contains the BuiltInTest components, such as C Built In Test)
2012-09-19T15:04:00.050Z,1348067040.050 [Module Loader](DEBUG): Loading Module at Modules/Servo.so
2012-09-19T15:04:00.217Z,1348067040.217 [BuoyancyServo] Loaded
2012-09-19T15:04:00.217Z,1348067040.217 [ComponentRegistry](DEBUG): SyncComponent "BuoyancyServo" handled in the control thread.
2012-09-19T15:04:00.227Z,1348067040.227 [ElevatorServo] Loaded
2012-09-19T15:04:00.227Z,1348067040.227 [ComponentRegistry](DEBUG): SyncComponent "ElevatorServo" handled in the control thread.
2012-09-19T15:04:00.239Z,1348067040.239 [MassServo] Loaded
2012-09-19T15:04:00.239Z,1348067040.239 [ComponentRegistry](DEBUG): SyncComponent "MassServo" handled in the control thread.
2012-09-19T15:04:00.255Z,1348067040.255 [RudderServo] Loaded
2012-09-19T15:04:00.255Z,1348067040.255 [ComponentRegistry](DEBUG): SyncComponent "RudderServo" handled in the control thread.
2012-09-19T15:04:00.266Z,1348067040.266 [ThrusterServo] Loaded
2012-09-19T15:04:00.266Z,1348067040.266 [ComponentRegistry](DEBUG): SyncComponent "ThrusterServo" handled in the control thread.
2012-09-19T15:04:00.267Z,1348067040.267 [Module Loader](DEBUG): Loaded Module: Servo (This is the module containing motor controllers)
2012-09-19T15:04:00.268Z,1348067040.267 [Module Loader](DEBUG): Loading Module at Modules/Derivation.so
2012-09-19T15:04:00.303Z,1348067040.303 [DepthRateCalculator] Loaded
2012-09-19T15:04:00.303Z,1348067040.303 [ComponentRegistry](DEBUG): SyncComponent "DepthRateCalculator" handled in the control thread.
2012-09-19T15:04:03.130Z,1348067043.130 [HFRadarModelCalc] Loaded
2012-09-19T15:04:03.130Z,1348067043.130 [ComponentRegistry](DEBUG): SyncComponent "HFRadarModelCalc" handled in the control thread.
2012-09-19T15:04:03.146Z,1348067043.146 [NavChart] Loaded
2012-09-19T15:04:03.146Z,1348067043.146 [ComponentRegistry](DEBUG): SyncComponent "NavChart" handled in the control thread.
2012-09-19T15:04:03.152Z,1348067043.152 [PitchRateCalculator] Loaded
2012-09-19T15:04:03.152Z,1348067043.152 [ComponentRegistry](DEBUG): SyncComponent "PitchRateCalculator" handled in the control thread.
2012-09-19T15:04:03.162Z,1348067043.162 [SpeedCalculator] Loaded
2012-09-19T15:04:03.163Z,1348067043.163 [ComponentRegistry](DEBUG): SyncComponent "SpeedCalculator" handled in the control thread.
2012-09-19T15:04:03.178Z,1348067043.178 [TempGradientCalculator] Loaded
2012-09-19T15:04:03.178Z,1348067043.178 [ComponentRegistry](DEBUG): SyncComponent "TempGradientCalculator" handled in the control thread.
2012-09-19T15:04:03.184Z,1348067043.184 [YawRateCalculator] Loaded
2012-09-19T15:04:03.184Z,1348067043.184 [ComponentRegistry](DEBUG): SyncComponent "YawRateCalculator" handled in the control thread.
2012-09-19T15:04:03.208Z,1348067043.208 [Navigation] Loaded
2012-09-19T15:04:03.208Z,1348067043.208 [ComponentRegistry](DEBUG): SyncComponent "Navigation" handled in the control thread.
2012-09-19T15:04:03.208Z,1348067043.208 [Module Loader](DEBUG): Loaded Module: Derivation (Contains the base derivation components)
2012-09-19T15:04:03.209Z,1348067043.209 [Module Loader](DEBUG): Loading Module at Modules/Guidance.so
2012-09-19T15:04:03.492Z,1348067043.492 [Module Loader](DEBUG): Loaded Module: Guidance (Contains behaviors and commands)
2012-09-19T15:04:03.493Z,1348067043.493 [Module Loader](DEBUG): Loading Module at Modules/Trigger.so
2012-09-19T15:04:03.535Z,1348067043.535 [Module Loader](DEBUG): Loaded Module: Trigger (Contains triggers for use in missions)
2012-09-19T15:04:03.535Z,1348067043.535 [Module Loader](DEBUG): Loading Module at Modules/Control.so
2012-09-19T15:04:03.599Z,1348067043.599 [VerticalControl](DEBUG): Construct VerticalControl.
2012-09-19T15:04:03.649Z,1348067043.649 [VerticalControl] Loaded
2012-09-19T15:04:03.649Z,1348067043.649 [ComponentRegistry](DEBUG): SyncComponent "VerticalControl" handled in the control thread.
2012-09-19T15:04:03.650Z,1348067043.650 [HorizontalControl](DEBUG): Construct HorizontalControl.
2012-09-19T15:04:03.674Z,1348067043.674 [HorizontalControl] Loaded
2012-09-19T15:04:03.675Z,1348067043.675 [ComponentRegistry](DEBUG): SyncComponent "HorizontalControl" handled in the control thread.
2012-09-19T15:04:03.676Z,1348067043.676 [SpeedControl](DEBUG): Construct SpeedControl.
2012-09-19T15:04:03.677Z,1348067043.677 [SpeedControl] Loaded
2012-09-19T15:04:03.678Z,1348067043.678 [ComponentRegistry](DEBUG): SyncComponent "SpeedControl" handled in the control thread.
2012-09-19T15:04:03.678Z,1348067043.678 [LoopControl](DEBUG): Construct LoopControl.
2012-09-19T15:04:03.679Z,1348067043.679 [LoopControl] Loaded
2012-09-19T15:04:03.679Z,1348067043.679 [ComponentRegistry](DEBUG): SyncComponent "LoopControl" handled in the control thread.
2012-09-19T15:04:03.680Z,1348067043.680 [Module Loader](DEBUG): Loaded Module: Control (Contains the Control components, such as Depth, Heading, and Speed Control)
2012-09-19T15:04:03.680Z,1348067043.680 [Module Loader](DEBUG): Loading Module at Modules/Sample.so
2012-09-19T15:04:03.688Z,1348067043.688 [AsyncPiEstimator](DEBUG): Construct AsyncPiEstimator.
2012-09-19T15:04:03.697Z,1348067043.697 [AsyncPiEstimator] Loaded
2012-09-19T15:04:03.697Z,1348067043.697 [ComponentRegistry](DEBUG): Component "AsyncPiEstimator" handled in its own thread.
2012-09-19T15:04:03.702Z,1348067043.702 [AsyncPiEstimator ThreadHandler](DEBUG): Created PCaller Thread at 4060A4E0
2012-09-19T15:04:03.703Z,1348067043.703 [Module Loader](DEBUG): Loaded Module: Sample (This is a Sample Module of Sample Components)
2012-09-19T15:04:03.704Z,1348067043.704 [Module Loader](DEBUG): Loading Module at Modules/Sensor.so
2012-09-19T15:04:03.882Z,1348067043.882 [AHRS_sp3003D] Loaded
2012-09-19T15:04:03.882Z,1348067043.882 [ComponentRegistry](DEBUG): SyncComponent "AHRS_sp3003D" handled in the control thread.
2012-09-19T15:04:03.896Z,1348067043.896 [Depth_Keller] Loaded
2012-09-19T15:04:03.896Z,1348067043.896 [ComponentRegistry](DEBUG): SyncComponent "Depth_Keller" handled in the control thread.
2012-09-19T15:04:03.906Z,1348067043.906 [DropWeight] Loaded
2012-09-19T15:04:03.906Z,1348067043.906 [ComponentRegistry](DEBUG): SyncComponent "DropWeight" handled in the control thread.
2012-09-19T15:04:04.039Z,1348067044.039 [DVL_micro] Loaded
2012-09-19T15:04:04.039Z,1348067044.039 [ComponentRegistry](DEBUG): Component "DVL_micro" handled in its own thread.
2012-09-19T15:04:04.042Z,1348067044.042 [DVL_micro ThreadHandler](DEBUG): Created PCaller Thread at 4068A4E0
2012-09-19T15:04:04.136Z,1348067044.136 [NAL9602] Loaded
2012-09-19T15:04:04.136Z,1348067044.136 [ComponentRegistry](DEBUG): SyncComponent "NAL9602" handled in the control thread.
2012-09-19T15:04:04.190Z,1348067044.190 [Onboard] Loaded
2012-09-19T15:04:04.191Z,1348067044.191 [ComponentRegistry](DEBUG): SyncComponent "Onboard" handled in the control thread.
2012-09-19T15:04:04.201Z,1348067044.201 [Radio_Freewave] Loaded
2012-09-19T15:04:04.202Z,1348067044.202 [ComponentRegistry](DEBUG): SyncComponent "Radio_Freewave" handled in the control thread.
2012-09-19T15:04:04.203Z,1348067044.203 [Module Loader](DEBUG): Loaded Module: Sensor (Contains the sensor components)
2012-09-19T15:04:04.203Z,1348067044.203 [Module Loader](DEBUG): Loading Module at Modules/Science.so
2012-09-19T15:04:04.307Z,1348067044.307 [CTD_NeilBrown] Loaded
2012-09-19T15:04:04.307Z,1348067044.307 [ComponentRegistry](DEBUG): Component "CTD_NeilBrown" handled in its own thread.
2012-09-19T15:04:04.310Z,1348067044.310 [CTD_NeilBrown ThreadHandler](DEBUG): Created PCaller Thread at 406E24E0
2012-09-19T15:04:04.320Z,1348067044.320 [PAR_Licor] Loaded
2012-09-19T15:04:04.321Z,1348067044.321 [ComponentRegistry](DEBUG): SyncComponent "PAR_Licor" handled in the control thread.
2012-09-19T15:04:04.342Z,1348067044.342 [Turbulence_NPS] Loaded
2012-09-19T15:04:04.342Z,1348067044.342 [ComponentRegistry](DEBUG): Component "Turbulence_NPS" handled in its own thread.
2012-09-19T15:04:04.346Z,1348067044.346 [Turbulence_NPS ThreadHandler](DEBUG): Created PCaller Thread at 407124E0
2012-09-19T15:04:04.382Z,1348067044.382 [WetLabsBB2FL] Loaded
2012-09-19T15:04:04.382Z,1348067044.382 [ComponentRegistry](DEBUG): Component "WetLabsBB2FL" handled in its own thread.
2012-09-19T15:04:04.386Z,1348067044.386 [WetLabsBB2FL ThreadHandler](DEBUG): Created PCaller Thread at 407424E0
2012-09-19T15:04:04.387Z,1348067044.387 [Module Loader](DEBUG): Loaded Module: Science (Contains the science components)
2012-09-19T15:04:04.389Z,1348067044.389 [ComponentRegistry](DEBUG): SyncComponent "MissionManager" handled in the control thread.
2012-09-19T15:04:04.390Z,1348067044.390 [ComponentRegistry](DEBUG): SyncComponent "Reporter" handled in the control thread.
2012-09-19T15:04:04.396Z,1348067044.396 [ComponentRegistry](DEBUG): Component "NavChartDb" handled in its own thread.
2012-09-19T15:04:04.398Z,1348067044.398 [NavChartDb ThreadHandler](DEBUG): Created PCaller Thread at 407724E0
2012-09-19T15:04:04.402Z,1348067044.402 [Supervisor](DEBUG): Running supervisor.
2012-09-19T15:04:04.407Z,1348067044.407 [controlThread](DEBUG): Initializing ControlThread
2012-09-19T15:04:04.408Z,1348067044.408 [InternalSim](DEBUG):  InternalSim initializing...
2012-09-19T15:04:04.531Z,1348067044.531 [AsyncPiEstimator](DEBUG): Initialize AsyncPiEstimator.
2012-09-19T15:04:04.694Z,1348067044.694 [CTD_NeilBrown](DEBUG): Initializing CTD_NeilBrown.
2012-09-19T15:04:04.736Z,1348067044.736 [DVL_micro](INFO): Initializing
2012-09-19T15:04:04.736Z,1348067044.736 [DVL_micro](INFO): start:Powering up
2012-09-19T15:04:04.768Z,1348067044.768 [WetLabsBB2FL](INFO): Powering down
2012-09-19T15:04:04.783Z,1348067044.783 [Turbulence_NPS](DEBUG): Initializing Turbulence_NPS.
2012-09-19T15:04:04.804Z,1348067044.805 [SBIT](INFO): Initialize SBIT Component.
2012-09-19T15:04:04.805Z,1348067044.805 [SBIT](IMPORTANT): Tethys CM Info:
$Rev: 9842
2012-09-19T15:04:04.805Z,1348067044.806 [IBIT](INFO): Initialize IBIT Component.
2012-09-19T15:04:04.815Z,1348067044.815 [CBIT](DEBUG): Initialize CBIT Component.
2012-09-19T15:04:04.815Z,1348067044.815 [CBIT](FAULT): LAST RESTART WAS UNINTENTIONAL.
2012-09-19T15:04:04.815Z,1348067044.815 [CBIT](INFO): Last reboot was NOT due to watchdog timer.
2012-09-19T15:04:04.860Z,1348067044.860 [DepthRateCalculator](DEBUG): Initializing DepthRateCalculator.
2012-09-19T15:04:04.860Z,1348067044.861 [NavChart](DEBUG): Initialize NavChart Derivation.
2012-09-19T15:04:04.861Z,1348067044.861 [PitchRateCalculator](DEBUG): Initializing PitchRateCalculator.
2012-09-19T15:04:04.861Z,1348067044.861 [SpeedCalculator](DEBUG): Initializing SpeedCalculator.
2012-09-19T15:04:04.862Z,1348067044.862 [TempGradientCalculator](DEBUG): Initializing TempGradientCalculator.
2012-09-19T15:04:04.872Z,1348067044.872 [YawRateCalculator](DEBUG): Initializing YawRateCalculator.
2012-09-19T15:04:04.872Z,1348067044.872 [Navigation](DEBUG): Initializing Navigation.
2012-09-19T15:04:04.872Z,1348067044.872 [VerticalControl](DEBUG): Initialize VerticalControlComponent.
2012-09-19T15:04:04.874Z,1348067044.875 [HorizontalControl](DEBUG): Initialize HorizontalControlComponent.
2012-09-19T15:04:04.875Z,1348067044.875 [SpeedControl](DEBUG): Initialize SpeedControlComponent.
2012-09-19T15:04:04.876Z,1348067044.876 [LoopControl](DEBUG): Initialize LoopControlComponent.
2012-09-19T15:04:04.913Z,1348067044.913 [MissionManager](INFO): Loading Mission: Missions/Startup.xml
2012-09-19T15:04:04.956Z,1348067044.956 [Startup:A.GoToSurface](DEBUG): Construct GoToSurface.
2012-09-19T15:04:04.966Z,1348067044.966 [MissionManager](DEBUG): 
<?xml version="1.0" encoding="UTF-8"?>
<Mission xmlns="Tethys"
       xmlns:Control="Tethys/Control"
       xmlns:Guidance="Tethys/Guidance" 
       xmlns:Units="Tethys/Units"
       xmlns:Universal="Tethys/Universal"
       xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
       xsi:schemaLocation="Tethys http://aosn.mbari.org/tethys/Xml/Tethys.xsd
                           Tethys/Control http://aosn.mbari.org/tethys/Xml/Control.xsd
                           Tethys/Guidance http://aosn.mbari.org/tethys/Xml/Guidance.xsd
                           Tethys/Units http://aosn.mbari.org/tethys/Xml/Units.xsd
                           Tethys/Universal http://aosn.mbari.org/tethys/Xml/Universal.xsd"
       Id="Startup">

    <Guidance:GoToSurface RunIn="Progression"/>

    <Aggregate Id="StartupSatComms" >

        <ReadDatum>
            <Timeout Duration="P1M" /><Universal:latitude_fix/>
        </ReadDatum>

        <ReadDatum>
            <Timeout Duration="P1M" /><Universal:platform_communications/>
        </ReadDatum>

    </Aggregate>

</Mission>


2012-09-19T15:04:04.978Z,1348067044.978 [MissionManager](INFO): Loading Mission: Missions/Default.xml
2012-09-19T15:04:05.089Z,1348067045.089 [MissionManager](INFO): DefineArg Default.NeedGPS = 1 bool
2012-09-19T15:04:05.104Z,1348067045.104 [Default:GPS:A.SetSpeed](DEBUG): Construct.
2012-09-19T15:04:05.107Z,1348067045.107 [Default:GPS:B.GoToSurface](DEBUG): Construct GoToSurface.
2012-09-19T15:04:05.123Z,1348067045.123 [NavChartDb](INFO): Looking for Electronic Nav Chart files in directory: Resources
2012-09-19T15:04:05.131Z,1348067045.131 [Default:Iridium:A.SetSpeed](DEBUG): Construct.
2012-09-19T15:04:05.134Z,1348067045.134 [Default:Iridium:B.GoToSurface](DEBUG): Construct GoToSurface.
2012-09-19T15:04:05.144Z,1348067045.144 [NavChartDb](INFO): Already Loaded Electronic Nav Chart data from US5CA50M.000
2012-09-19T15:04:05.148Z,1348067045.148 [NavChartDb](INFO): Already Loaded Electronic Nav Chart data from US2WC11M.000
2012-09-19T15:04:05.157Z,1348067045.157 [Default:Iridium:A_Timeout:A.Execute](DEBUG): Construct Execute.
2012-09-19T15:04:05.168Z,1348067045.168 [NavChartDb](INFO): Already Loaded Electronic Nav Chart data from US1WC07M.000
2012-09-19T15:04:05.172Z,1348067045.172 [NavChartDb](INFO): Already Loaded Electronic Nav Chart data from US3CA52M.000
2012-09-19T15:04:05.187Z,1348067045.187 [NavChartDb](INFO): Creating index for Soundings
2012-09-19T15:04:05.190Z,1348067045.190 [NavChartDb](INFO): Creating index for Contour 0p0
2012-09-19T15:04:05.192Z,1348067045.192 [NavChartDb](INFO): Creating index for Contour 1p8
2012-09-19T15:04:05.194Z,1348067045.194 [NavChartDb](INFO): Creating index for Contour 3p6
2012-09-19T15:04:05.197Z,1348067045.197 [Default:D.SetSpeed](DEBUG): Construct.
2012-09-19T15:04:05.215Z,1348067045.215 [NavChartDb](INFO): Creating index for Contour 5p4
2012-09-19T15:04:05.217Z,1348067045.217 [NavChartDb](INFO): Creating index for Contour 9p1
2012-09-19T15:04:05.219Z,1348067045.218 [NavChartDb](INFO): Creating index for Contour 10p9
2012-09-19T15:04:05.220Z,1348067045.220 [NavChartDb](INFO): Creating index for Contour 18p2
2012-09-19T15:04:05.222Z,1348067045.222 [NavChartDb](INFO): Creating index for Contour 36p5
2012-09-19T15:04:05.226Z,1348067045.226 [Default:E.GoToSurface](DEBUG): Construct GoToSurface.
2012-09-19T15:04:05.231Z,1348067045.231 [NavChartDb](INFO): Creating index for Contour 54p8
2012-09-19T15:04:05.233Z,1348067045.233 [NavChartDb](INFO): Creating index for Contour 73p1
2012-09-19T15:04:05.234Z,1348067045.234 [NavChartDb](INFO): Creating index for Contour 91p4
2012-09-19T15:04:05.243Z,1348067045.243 [NavChartDb](INFO): Creating index for Contour 182p8
2012-09-19T15:04:05.245Z,1348067045.245 [NavChartDb](INFO): Creating index for Contour 365p7
2012-09-19T15:04:05.247Z,1348067045.247 [Default:F.Wait](DEBUG): Construct Wait.
2012-09-19T15:04:05.250Z,1348067045.250 [MissionManager](DEBUG): 
<?xml version="1.0" encoding="UTF-8"?>
<Mission xmlns="Tethys"
xmlns:Control="Tethys/Control"
xmlns:Guidance="Tethys/Guidance" 
xmlns:Units="Tethys/Units"
xmlns:Universal="Tethys/Universal"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:schemaLocation="Tethys http://aosn.mbari.org/tethys/Xml/Tethys.xsd
Tethys/Control http://aosn.mbari.org/tethys/Xml/Control.xsd
Tethys/Guidance http://aosn.mbari.org/tethys/Xml/Guidance.xsd
Tethys/Units http://aosn.mbari.org/tethys/Xml/Units.xsd
Tethys/Universal http://aosn.mbari.org/tethys/Xml/Universal.xsd"
Id="Default">

    <DefineArg Name="NeedGPS"><True/></DefineArg>

    <Aggregate Id="GPS" >

        <When><Arg Name="NeedGPS"/>
        </When>

<!-- Run at high speed -->

        <Guidance:SetSpeed RunIn="Parallel">
            <Setting><Guidance:SetSpeed.period/><Units:millisecond/><Value>400</Value></Setting>
        </Guidance:SetSpeed>

<!-- Get to the surface -->

        <Guidance:GoToSurface RunIn="Sequence"/>

<!-- Get GPS fix -->

        <ReadDatum Id="Read_GPS"><Universal:latitude_fix/>
        </ReadDatum>

        <Assign><Arg Name="NeedGPS"/><False/></Assign>

    </Aggregate>

    <Aggregate Id="Iridium" >

<!-- Run at high speed -->

        <Guidance:SetSpeed RunIn="Parallel">
            <Setting><Guidance:SetSpeed.period/><Units:millisecond/><Value>400</Value></Setting>
        </Guidance:SetSpeed>

<!-- Get to the surface -->

        <Guidance:GoToSurface RunIn="Sequence"/>

<!-- Do data comms -->

        <ReadDatum Id="Read_Iridium">
            <Timeout Duration="P2H">
                <Guidance:Execute RunIn="Sequence">
                    <Setting>
                    <Guidance:Execute.command/><String>Burn 300</String></Setting>
                </Guidance:Execute>
                <Syslog Severity="Critical">Dropped drop weight due to communications timeout</Syslog>
            </Timeout><Universal:platform_communications/>
        </ReadDatum>

    </Aggregate>

    <Aggregate Id="CallIridium" >

        <When>
            <Elapsed><Universal:platform_communications/></Elapsed>
            <Gt><Units:minute/><Value>5.0</Value></Gt>
            <And><Universal:platform_conversation/><Eq><True/></Eq></And>
            <Or>
            <Elapsed><Universal:platform_communications/></Elapsed><Gt><Units:hour/><Value>1.0</Value></Gt></Or>
        </When>

        <Assign><Arg Name="NeedGPS"/><True/></Assign>

        <Call RefId="Iridium"/>

    </Aggregate>

<!-- Wait forever at the surface-->

<!-- Run at low speed -->

    <Guidance:SetSpeed RunIn="Parallel">
        <Setting><Guidance:SetSpeed.period/><Units:second/><Value>5</Value></Setting>
    </Guidance:SetSpeed>

    <Guidance:GoToSurface RunIn="Parallel"/>

    <Guidance:Wait RunIn="Sequence"></Guidance:Wait>

</Mission>


2012-09-19T15:04:05.251Z,1348067045.251 [NavChartDb](INFO): Creating index for Contour 548p6
2012-09-19T15:04:05.253Z,1348067045.253 [NavChartDb](INFO): Creating index for Contour 731p5
2012-09-19T15:04:05.259Z,1348067045.259 [controlThread](DEBUG): Component order: CycleStarter,InternalSim,AHRS_sp3003D,Depth_Keller,DropWeight,NAL9602,Onboard,Radio_Freewave,PAR_Licor,Depth_Keller,PAR_Licor,DepthRateCalculator,HFRadarModelCalc,NavChart,PitchRateCalculator,SpeedCalculator,TempGradientCalculator,YawRateCalculator,Navigation,MissionManager,VerticalControl,HorizontalControl,SpeedControl,LoopControl,BuoyancyServo,ElevatorServo,MassServo,RudderServo,ThrusterServo,SBIT,IBIT,CBIT,Reporter,logger,
2012-09-19T15:04:05.271Z,1348067045.271 [NavChartDb](INFO): Creating index for Contour 914p4
2012-09-19T15:04:05.273Z,1348067045.273 [NavChartDb](INFO): Creating index for Contour 1097p2
2012-09-19T15:04:05.283Z,1348067045.283 [NavChartDb](INFO): Creating index for Contour 1280p1
2012-09-19T15:04:05.285Z,1348067045.284 [NavChartDb](INFO): Creating index for Contour 1463p0
2012-09-19T15:04:05.286Z,1348067045.286 [NavChartDb](INFO): Creating index for Contour 1645p9
2012-09-19T15:04:05.288Z,1348067045.288 [NavChartDb](INFO): Creating index for Contour 1828p8
2012-09-19T15:04:05.290Z,1348067045.290 [NavChartDb](INFO): Creating index for Contour 2011p6
2012-09-19T15:04:05.303Z,1348067045.303 [NavChartDb](INFO): Creating index for Contour 2194p5
2012-09-19T15:04:05.305Z,1348067045.305 [NavChartDb](INFO): Creating index for Contour 2377p4
2012-09-19T15:04:05.310Z,1348067045.310 [AHRS_sp3003D](DEBUG): Initializing AHRS_sp3003D.
2012-09-19T15:04:05.311Z,1348067045.311 [NavChartDb](INFO): Creating index for Contour 2560p3
2012-09-19T15:04:05.313Z,1348067045.313 [NavChartDb](INFO): Creating index for Contour 2743p2
2012-09-19T15:04:05.328Z,1348067045.328 [NavChartDb](INFO): Creating index for Contour 2926p0
2012-09-19T15:04:05.330Z,1348067045.330 [NavChartDb](INFO): Creating index for Contour 3108p9
2012-09-19T15:04:05.339Z,1348067045.339 [NavChartDb](INFO): Creating index for Contour 3291p8
2012-09-19T15:04:05.341Z,1348067045.341 [NavChartDb](INFO): Creating index for Contour 3474p7
2012-09-19T15:04:05.343Z,1348067045.342 [NavChartDb](INFO): Creating index for Contour 3657p6
2012-09-19T15:04:05.576Z,1348067045.576 [Radio_Freewave](INFO): Powering up
2012-09-19T15:04:05.769Z,1348067045.769 [BuoyancyServo](DEBUG): Initializing EZServoServo.
2012-09-19T15:04:05.779Z,1348067045.779 [BuoyancyServo](DEBUG): Initializing BuoyancyServo.
2012-09-19T15:04:05.785Z,1348067045.785 [ElevatorServo](DEBUG): Initializing EZServoServo.
2012-09-19T15:04:05.787Z,1348067045.787 [ElevatorServo](DEBUG): Initializing ElevatorServo.
2012-09-19T15:04:05.793Z,1348067045.793 [MassServo](DEBUG): Initializing EZServoServo.
2012-09-19T15:04:05.803Z,1348067045.803 [MassServo](DEBUG): Initializing MassServo.
2012-09-19T15:04:05.809Z,1348067045.809 [RudderServo](DEBUG): Initializing EZServoServo.
2012-09-19T15:04:05.810Z,1348067045.810 [RudderServo](DEBUG): Initializing RudderServo.
2012-09-19T15:04:05.816Z,1348067045.816 [ThrusterServo](DEBUG): Initializing EZServoServo.
2012-09-19T15:04:05.827Z,1348067045.827 [ThrusterServo](DEBUG): Initializing ThrusterServo.
2012-09-19T15:04:06.431Z,1348067046.431 [DVL_micro](INFO): Querying output modes
2012-09-19T15:04:06.431Z,1348067046.431 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD0606

2012-09-19T15:04:06.435Z,1348067046.435 [DVL_micro](DEBUG): cmdResponse: 01 03 16
2012-09-19T15:04:06.435Z,1348067046.435 [DVL_micro](INFO): NQ1 output enabled
2012-09-19T15:04:06.435Z,1348067046.435 [DVL_micro](INFO): RSSI output enabled
2012-09-19T15:04:06.435Z,1348067046.435 [DVL_micro](INFO): ADCP output enabled
2012-09-19T15:04:06.435Z,1348067046.435 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD2525

2012-09-19T15:04:06.443Z,1348067046.443 [DVL_micro](DEBUG): cmdResponse: AUTO_VEL_ON 
2012-09-19T15:04:06.448Z,1348067046.448 [DVL_micro](INFO): pause:Powering down
2012-09-19T15:04:09.102Z,1348067049.102 [PAR_Licor](ERROR): PAR reading out of range: -0.011126 uMol/s/m2
2012-09-19T15:04:09.441Z,1348067049.441 [NAL9602](INFO): Powering up NAL9602
2012-09-19T15:04:13.583Z,1348067053.583 [MassServo](FAULT): Overload Error
2012-09-19T15:04:13.583Z,1348067053.583 [MassServo] Hardware Fault, FailCount= 1
2012-09-19T15:04:13.583Z,1348067053.583 [MassServo](ERROR): Hardware Fault
2012-09-19T15:04:13.586Z,1348067053.586 [CBIT](ERROR): Hardware Fault in component: MassServo
2012-09-19T15:04:14.020Z,1348067054.020 [MassServo](DEBUG): Uninitialize Mass Servo.
2012-09-19T15:04:14.020Z,1348067054.020 [MassServo](INFO): Powering down
2012-09-19T15:04:14.047Z,1348067054.047 [CBIT](INFO): Clearing failed state for component MassServo
2012-09-19T15:04:14.047Z,1348067054.047 [MassServo] No Fault, FailCount= 1
2012-09-19T15:04:14.328Z,1348067054.328 [MassServo](DEBUG): Initializing EZServoServo.
2012-09-19T15:04:14.451Z,1348067054.451 [MassServo](DEBUG): Initialization error opening port: port not yet opened
2012-09-19T15:04:14.451Z,1348067054.451 [MassServo](DEBUG): Initializing MassServo.
2012-09-19T15:04:17.503Z,1348067057.503 [PAR_Licor](ERROR): PAR reading out of range: -0.006358 uMol/s/m2
2012-09-19T15:04:18.346Z,1348067058.346 [MassServo](FAULT): Overload Error
2012-09-19T15:04:18.347Z,1348067058.347 [MassServo] Hardware Fault, FailCount= 2
2012-09-19T15:04:18.347Z,1348067058.347 [MassServo](ERROR): Hardware Fault
2012-09-19T15:04:18.350Z,1348067058.350 [CBIT](ERROR): Hardware Fault in component: MassServo
2012-09-19T15:04:18.726Z,1348067058.726 [MassServo](DEBUG): Uninitialize Mass Servo.
2012-09-19T15:04:18.726Z,1348067058.726 [MassServo](INFO): Powering down
2012-09-19T15:04:18.733Z,1348067058.733 [CBIT](INFO): Clearing failed state for component MassServo
2012-09-19T15:04:18.733Z,1348067058.733 [MassServo] No Fault, FailCount= 2
2012-09-19T15:04:19.126Z,1348067059.126 [MassServo](DEBUG): Initializing EZServoServo.
2012-09-19T15:04:19.255Z,1348067059.255 [MassServo](DEBUG): Initialization error opening port: port not yet opened
2012-09-19T15:04:19.255Z,1348067059.255 [MassServo](DEBUG): Initializing MassServo.
2012-09-19T15:04:19.935Z,1348067059.935 [NAL9602](INFO): NAL9602 initialized
2012-09-19T15:04:20.331Z,1348067060.331 [SBIT](IMPORTANT): Beginning Startup BIT
2012-09-19T15:04:20.333Z,1348067060.333 [CBIT](IMPORTANT): Beginning GF scan
2012-09-19T15:04:21.907Z,1348067061.907 [PAR_Licor](ERROR): PAR reading out of range: -0.030200 uMol/s/m2
2012-09-19T15:04:23.150Z,1348067063.151 [MassServo](FAULT): Overload Error
2012-09-19T15:04:23.151Z,1348067063.151 [MassServo] Hardware Fault, FailCount= 3
2012-09-19T15:04:23.151Z,1348067063.151 [MassServo](ERROR): Hardware Fault
2012-09-19T15:04:23.222Z,1348067063.222 [CBIT](ERROR): Hardware Fault in component: MassServo
2012-09-19T15:04:23.542Z,1348067063.542 [MassServo](DEBUG): Uninitialize Mass Servo.
2012-09-19T15:04:23.542Z,1348067063.542 [MassServo](INFO): Powering down
2012-09-19T15:04:23.570Z,1348067063.570 [CBIT](INFO): Clearing failed state for component MassServo
2012-09-19T15:04:23.570Z,1348067063.570 [MassServo] No Fault, FailCount= 3
2012-09-19T15:04:23.915Z,1348067063.915 [MassServo](DEBUG): Initializing EZServoServo.
2012-09-19T15:04:24.039Z,1348067064.039 [MassServo](DEBUG): Initialization error opening port: port not yet opened
2012-09-19T15:04:24.039Z,1348067064.039 [MassServo](DEBUG): Initializing MassServo.
2012-09-19T15:04:25.888Z,1348067065.888 [PAR_Licor](ERROR): PAR reading out of range: -0.004768 uMol/s/m2
2012-09-19T15:04:27.080Z,1348067067.080 [PAR_Licor](ERROR): PAR reading out of range: -0.071527 uMol/s/m2
2012-09-19T15:04:27.987Z,1348067067.987 [MassServo](FAULT): Overload Error
2012-09-19T15:04:27.987Z,1348067067.987 [MassServo] Hardware Fault, FailCount= 4
2012-09-19T15:04:27.987Z,1348067067.987 [MassServo](ERROR): Hardware Fault
2012-09-19T15:04:28.035Z,1348067068.035 [CBIT](ERROR): Hardware Fault in component: MassServo
2012-09-19T15:04:28.291Z,1348067068.291 [PAR_Licor](ERROR): PAR reading out of range: -0.038148 uMol/s/m2
2012-09-19T15:04:28.312Z,1348067068.312 [MassServo](DEBUG): Uninitialize Mass Servo.
2012-09-19T15:04:28.312Z,1348067068.312 [MassServo](INFO): Powering down
2012-09-19T15:04:28.316Z,1348067068.316 [CBIT](INFO): Clearing failed state for component MassServo
2012-09-19T15:04:28.316Z,1348067068.316 [MassServo] No Fault, FailCount= 4
2012-09-19T15:04:28.731Z,1348067068.731 [MassServo](DEBUG): Initializing EZServoServo.
2012-09-19T15:04:28.852Z,1348067068.852 [MassServo](DEBUG): Initialization error opening port: port not yet opened
2012-09-19T15:04:28.852Z,1348067068.852 [MassServo](DEBUG): Initializing MassServo.
2012-09-19T15:04:29.138Z,1348067069.138 [PAR_Licor](ERROR): PAR reading out of range: -0.019074 uMol/s/m2
2012-09-19T15:04:30.280Z,1348067070.280 [PAR_Licor](ERROR): PAR reading out of range: -0.054043 uMol/s/m2
2012-09-19T15:04:32.714Z,1348067072.714 [MassServo](FAULT): Overload Error
2012-09-19T15:04:32.714Z,1348067072.714 [MassServo] Hardware Fault, FailCount= 5
2012-09-19T15:04:32.715Z,1348067072.714 [MassServo](ERROR): Hardware Fault
2012-09-19T15:04:32.762Z,1348067072.762 [CBIT](ERROR): Hardware Fault in component: MassServo
2012-09-19T15:04:32.762Z,1348067072.762 [CBIT](CRITICAL): Hardware Fault in component: MassServo
2012-09-19T15:04:33.093Z,1348067073.093 [MassServo](DEBUG): Uninitialize Mass Servo.
2012-09-19T15:04:33.093Z,1348067073.093 [MassServo](INFO): Powering down
2012-09-19T15:04:34.281Z,1348067074.281 [PAR_Licor](ERROR): PAR reading out of range: -0.012716 uMol/s/m2
2012-09-19T15:04:36.684Z,1348067076.684 [PAR_Licor](ERROR): PAR reading out of range: -0.058811 uMol/s/m2
2012-09-19T15:04:38.327Z,1348067078.327 [PAR_Licor](ERROR): PAR reading out of range: -0.011126 uMol/s/m2
2012-09-19T15:04:39.483Z,1348067079.483 [PAR_Licor](ERROR): PAR reading out of range: -0.046095 uMol/s/m2
2012-09-19T15:04:40.282Z,1348067080.282 [PAR_Licor](ERROR): PAR reading out of range: -0.054043 uMol/s/m2
2012-09-19T15:04:41.544Z,1348067081.544 [PAR_Licor](ERROR): PAR reading out of range: -0.020663 uMol/s/m2
2012-09-19T15:04:42.680Z,1348067082.680 [PAR_Licor](ERROR): PAR reading out of range: -0.050864 uMol/s/m2
2012-09-19T15:04:43.480Z,1348067083.480 [PAR_Licor](ERROR): PAR reading out of range: -0.071527 uMol/s/m2
2012-09-19T15:04:44.684Z,1348067084.684 [PAR_Licor](ERROR): PAR reading out of range: -0.006358 uMol/s/m2
2012-09-19T15:04:47.096Z,1348067087.096 [CBIT](IMPORTANT): No ground fault detected
2012-09-19T15:04:47.884Z,1348067087.884 [PAR_Licor](ERROR): PAR reading out of range: -0.017484 uMol/s/m2
2012-09-19T15:04:49.084Z,1348067089.084 [PAR_Licor](ERROR): PAR reading out of range: -0.033379 uMol/s/m2
2012-09-19T15:04:49.881Z,1348067089.881 [PAR_Licor](ERROR): PAR reading out of range: -0.066759 uMol/s/m2
2012-09-19T15:04:53.481Z,1348067093.481 [PAR_Licor](ERROR): PAR reading out of range: -0.030200 uMol/s/m2
2012-09-19T15:04:54.280Z,1348067094.280 [PAR_Licor](ERROR): PAR reading out of range: -0.055632 uMol/s/m2
2012-09-19T15:04:55.881Z,1348067095.881 [PAR_Licor](ERROR): PAR reading out of range: -0.011126 uMol/s/m2
2012-09-19T15:04:59.480Z,1348067099.480 [PAR_Licor](ERROR): PAR reading out of range: -0.038148 uMol/s/m2
2012-09-19T15:05:00.290Z,1348067100.290 [PAR_Licor](ERROR): PAR reading out of range: -0.020663 uMol/s/m2
2012-09-19T15:05:02.285Z,1348067102.285 [PAR_Licor](ERROR): PAR reading out of range: -0.004768 uMol/s/m2
2012-09-19T15:05:09.082Z,1348067109.082 [PAR_Licor](ERROR): PAR reading out of range: -0.038148 uMol/s/m2
2012-09-19T15:05:13.540Z,1348067113.540 [SBIT](FAULT): Elevator: EXPECTED:0.000000 ACTUAL:-0.087977
2012-09-19T15:05:13.540Z,1348067113.540 [SBIT](FAULT): Control surface position failure.
2012-09-19T15:05:13.940Z,1348067113.940 [SBIT](CRITICAL): SBIT FAILED
2012-09-19T15:05:14.289Z,1348067114.289 [MissionManager](IMPORTANT): Started mission Startup
2012-09-19T15:05:14.289Z,1348067114.289 [Startup] Running Loop=1
2012-09-19T15:05:14.289Z,1348067114.289 [Startup](INFO): Aggregate::initialize Startup
2012-09-19T15:05:14.289Z,1348067114.289 [Startup:A.GoToSurface] Running Loop=1
2012-09-19T15:05:14.289Z,1348067114.289 [Startup:A.GoToSurface](DEBUG): Initialize GoToSurfaceComponent.
2012-09-19T15:05:14.295Z,1348067114.295 [Startup:StartupSatComms] Running Loop=1
2012-09-19T15:05:14.295Z,1348067114.295 [Startup:StartupSatComms](INFO): Aggregate::initialize Startup:StartupSatComms
2012-09-19T15:05:14.296Z,1348067114.296 [Startup:StartupSatComms:A] Running Loop=1
2012-09-19T15:05:14.688Z,1348067114.688 [Startup:StartupSatComms:A](DEBUG): Initialize ReadDataComponent to sense latitude_fix
2012-09-19T15:05:15.483Z,1348067115.483 [PAR_Licor](ERROR): PAR reading out of range: -0.001589 uMol/s/m2
2012-09-19T15:05:26.681Z,1348067126.681 [PAR_Licor](ERROR): PAR reading out of range: -0.006358 uMol/s/m2
2012-09-19T15:05:28.683Z,1348067128.683 [PAR_Licor](ERROR): PAR reading out of range: -0.007947 uMol/s/m2
2012-09-19T15:05:31.085Z,1348067131.085 [PAR_Licor](ERROR): PAR reading out of range: -0.025432 uMol/s/m2
2012-09-19T15:05:34.281Z,1348067134.281 [PAR_Licor](ERROR): PAR reading out of range: -0.001589 uMol/s/m2
2012-09-19T15:05:57.483Z,1348067157.483 [PAR_Licor](ERROR): PAR reading out of range: -0.009537 uMol/s/m2
2012-09-19T15:06:01.084Z,1348067161.084 [PAR_Licor](ERROR): PAR reading out of range: -0.027021 uMol/s/m2
2012-09-19T15:06:01.839Z,1348067161.839 [CommandLine](IMPORTANT): got command set NAL9602.latitude_fix 36.799999 degree
2012-09-19T15:06:01.840Z,1348067161.839 [CommandLine](IMPORTANT): got command set NAL9602.longitude_fix -121.779999 degree
2012-09-19T15:06:01.935Z,1348067161.935 [Startup:StartupSatComms:A] Stopped
2012-09-19T15:06:01.935Z,1348067161.935 [Startup:StartupSatComms:B] Running Loop=1
2012-09-19T15:06:01.991Z,1348067161.991 [NavChartDb](INFO): Charting Soundings
2012-09-19T15:06:02.192Z,1348067162.193 [CommandLine](IMPORTANT): got command set NAL9602.platform_communications 1.000000 bool
2012-09-19T15:06:02.291Z,1348067162.291 [PAR_Licor](ERROR): PAR reading out of range: -0.011126 uMol/s/m2
2012-09-19T15:06:02.305Z,1348067162.305 [Startup:StartupSatComms:B](DEBUG): Initialize ReadDataComponent to sense platform_communications
2012-09-19T15:06:02.307Z,1348067162.307 [Startup:StartupSatComms:B] Stopped
2012-09-19T15:06:02.309Z,1348067162.309 [Startup:StartupSatComms](INFO): Completed Startup:StartupSatComms
2012-09-19T15:06:02.309Z,1348067162.309 [Startup:StartupSatComms] Stopped
2012-09-19T15:06:02.309Z,1348067162.309 [Startup:StartupSatComms](INFO): Aggregate::uninitialize Startup:StartupSatComms
2012-09-19T15:06:02.310Z,1348067162.310 [Startup](INFO): Completed Startup
2012-09-19T15:06:02.310Z,1348067162.310 [Startup] Stopped
2012-09-19T15:06:02.311Z,1348067162.311 [Startup](INFO): Aggregate::uninitialize Startup
2012-09-19T15:06:02.311Z,1348067162.311 [Startup:A.GoToSurface] Stopped
2012-09-19T15:06:02.311Z,1348067162.311 [Startup:A.GoToSurface](DEBUG): Uninitialize GoToSurfaceComponent.
2012-09-19T15:06:02.694Z,1348067162.694 [MissionManager](IMPORTANT): Started mission Default
2012-09-19T15:06:02.694Z,1348067162.694 [Default] Running Loop=1
2012-09-19T15:06:02.694Z,1348067162.694 [Default](INFO): Aggregate::initialize Default
2012-09-19T15:06:02.694Z,1348067162.694 [Default:D.SetSpeed] Running Loop=1
2012-09-19T15:06:02.694Z,1348067162.694 [Default:D.SetSpeed](DEBUG): Initialize.
2012-09-19T15:06:02.694Z,1348067162.694 [Default:E.GoToSurface] Running Loop=1
2012-09-19T15:06:02.694Z,1348067162.694 [Default:E.GoToSurface](DEBUG): Initialize GoToSurfaceComponent.
2012-09-19T15:06:02.695Z,1348067162.695 [Default:Iridium] Running Loop=1
2012-09-19T15:06:02.695Z,1348067162.695 [Default:Iridium](INFO): Aggregate::initialize Default:Iridium
2012-09-19T15:06:02.695Z,1348067162.695 [Default:Iridium:A.SetSpeed] Running Loop=1
2012-09-19T15:06:02.695Z,1348067162.695 [Default:Iridium:A.SetSpeed](DEBUG): Initialize.
2012-09-19T15:06:02.695Z,1348067162.695 [Default:Iridium:B.GoToSurface] Running Loop=1
2012-09-19T15:06:02.695Z,1348067162.695 [Default:Iridium:B.GoToSurface](DEBUG): Initialize GoToSurfaceComponent.
2012-09-19T15:06:02.696Z,1348067162.696 [Default:E.GoToSurface] Running Loop=1
2012-09-19T15:06:02.701Z,1348067162.701 [Default:D.SetSpeed] Running Loop=1
2012-09-19T15:06:02.711Z,1348067162.711 [Default:Iridium:B.GoToSurface] Stopped
2012-09-19T15:06:02.711Z,1348067162.711 [Default:Iridium:B.GoToSurface](DEBUG): Uninitialize GoToSurfaceComponent.
2012-09-19T15:06:02.711Z,1348067162.711 [Default:Iridium:Read_Iridium] Running Loop=1
2012-09-19T15:06:02.711Z,1348067162.711 [Default:Iridium:A.SetSpeed] Running Loop=1
2012-09-19T15:06:02.716Z,1348067162.716 [Default:GPS] Running Loop=1
2012-09-19T15:06:02.716Z,1348067162.716 [Default:GPS](INFO): Aggregate::initialize Default:GPS
2012-09-19T15:06:02.716Z,1348067162.716 [Default:GPS:A.SetSpeed] Running Loop=1
2012-09-19T15:06:02.716Z,1348067162.716 [Default:GPS:A.SetSpeed](DEBUG): Initialize.
2012-09-19T15:06:02.716Z,1348067162.717 [Default:GPS:B.GoToSurface] Running Loop=1
2012-09-19T15:06:02.717Z,1348067162.717 [Default:GPS:B.GoToSurface](DEBUG): Initialize GoToSurfaceComponent.
2012-09-19T15:06:02.722Z,1348067162.722 [Default:GPS:B.GoToSurface] Stopped
2012-09-19T15:06:02.722Z,1348067162.722 [Default:GPS:B.GoToSurface](DEBUG): Uninitialize GoToSurfaceComponent.
2012-09-19T15:06:02.722Z,1348067162.722 [Default:GPS:Read_GPS] Running Loop=1
2012-09-19T15:06:02.722Z,1348067162.722 [Default:GPS:A.SetSpeed] Running Loop=1
2012-09-19T15:06:03.153Z,1348067163.153 [Default:Iridium:Read_Iridium](DEBUG): Initialize ReadDataComponent to sense platform_communications
2012-09-19T15:06:03.160Z,1348067163.160 [Default:GPS:Read_GPS](DEBUG): Initialize ReadDataComponent to sense latitude_fix
2012-09-19T15:06:03.591Z,1348067163.591 [NavChartDb](INFO): Charting 0p0
2012-09-19T15:06:05.324Z,1348067165.324 [NavChartDb](INFO): Charting 1p8
2012-09-19T15:06:07.722Z,1348067167.722 [PAR_Licor](ERROR): PAR reading out of range: -0.027021 uMol/s/m2
2012-09-19T15:06:07.727Z,1348067167.727 [NavChartDb](INFO): Charting 3p6
2012-09-19T15:06:09.721Z,1348067169.721 [PAR_Licor](ERROR): PAR reading out of range: -0.003179 uMol/s/m2
2012-09-19T15:06:10.127Z,1348067170.127 [NavChartDb](INFO): Charting 5p4
2012-09-19T15:06:10.919Z,1348067170.918 [PAR_Licor](ERROR): PAR reading out of range: -0.001589 uMol/s/m2
2012-09-19T15:06:12.927Z,1348067172.927 [NavChartDb](INFO): Charting 9p1
2012-09-19T15:06:14.527Z,1348067174.527 [NavChartDb](INFO): Charting 10p9
2012-09-19T15:06:15.552Z,1348067175.552 [PAR_Licor](ERROR): PAR reading out of range: -0.033379 uMol/s/m2
2012-09-19T15:06:16.526Z,1348067176.526 [NavChartDb](INFO): Charting 18p2
2012-09-19T15:06:16.753Z,1348067176.753 [PAR_Licor](ERROR): PAR reading out of range: -0.034969 uMol/s/m2
2012-09-19T15:06:19.327Z,1348067179.327 [NavChartDb](INFO): Charting 36p5
2012-09-19T15:06:22.127Z,1348067182.127 [NavChartDb](INFO): Charting 54p8
2012-09-19T15:06:22.904Z,1348067182.904 [PAR_Licor](ERROR): PAR reading out of range: -0.044506 uMol/s/m2
2012-09-19T15:06:29.151Z,1348067189.151 [NavChartDb](INFO): Charting 73p1
2012-09-19T15:06:31.551Z,1348067191.551 [NavChartDb](INFO): Charting 91p4
2012-09-19T15:06:34.671Z,1348067194.671 [NavChartDb](INFO): Charting 182p8
2012-09-19T15:06:37.411Z,1348067197.411 [PAR_Licor](ERROR): PAR reading out of range: 0.000000 uMol/s/m2
2012-09-19T15:06:44.435Z,1348067204.434 [NavChartDb](INFO): Charting 365p7
2012-09-19T15:06:47.642Z,1348067207.642 [NavChartDb](INFO): Charting 548p6
2012-09-19T15:06:49.081Z,1348067209.081 [PAR_Licor](ERROR): PAR reading out of range: -0.011126 uMol/s/m2
2012-09-19T15:06:50.887Z,1348067210.887 [NavChartDb](INFO): Charting 731p5
2012-09-19T15:06:54.763Z,1348067214.763 [NavChartDb](INFO): Charting 914p4
2012-09-19T15:06:56.702Z,1348067216.702 [PAR_Licor](ERROR): PAR reading out of range: -0.001589 uMol/s/m2
2012-09-19T15:07:08.321Z,1348067228.321 [PAR_Licor](ERROR): PAR reading out of range: -0.007947 uMol/s/m2
2012-09-19T15:07:09.155Z,1348067229.155 [PAR_Licor](ERROR): PAR reading out of range: -0.027021 uMol/s/m2
2012-09-19T15:07:10.569Z,1348067230.569 [PAR_Licor](ERROR): PAR reading out of range: -0.003179 uMol/s/m2
2012-09-19T15:07:18.163Z,1348067238.163 [NavChartDb](INFO): Charting 1097p2
2012-09-19T15:07:18.697Z,1348067238.697 [PAR_Licor](ERROR): PAR reading out of range: -0.004768 uMol/s/m2
2012-09-19T15:07:24.510Z,1348067244.510 [PAR_Licor](ERROR): PAR reading out of range: 0.000000 uMol/s/m2
2012-09-19T15:07:26.221Z,1348067246.221 [PAR_Licor](ERROR): PAR reading out of range: -0.014305 uMol/s/m2
2012-09-19T15:07:26.559Z,1348067246.559 [NavChartDb](INFO): Charting 1280p1
2012-09-19T15:07:28.032Z,1348067248.032 [PAR_Licor](ERROR): PAR reading out of range: -0.004768 uMol/s/m2
2012-09-19T15:07:32.207Z,1348067252.207 [NavChartDb](INFO): Charting 1463p0
2012-09-19T15:07:32.324Z,1348067252.324 [PAR_Licor](ERROR): PAR reading out of range: -0.047685 uMol/s/m2
2012-09-19T15:07:38.539Z,1348067258.539 [NavChartDb](INFO): Charting 1645p9
2012-09-19T15:07:39.491Z,1348067259.491 [PAR_Licor](ERROR): PAR reading out of range: -0.004768 uMol/s/m2
2012-09-19T15:07:42.666Z,1348067262.667 [NavChartDb](INFO): Charting 1828p8
2012-09-19T15:07:42.970Z,1348067262.970 [PAR_Licor](ERROR): PAR reading out of range: -0.006358 uMol/s/m2
2012-09-19T15:07:44.430Z,1348067264.430 [PAR_Licor](ERROR): PAR reading out of range: -0.004768 uMol/s/m2
2012-09-19T15:07:46.389Z,1348067266.389 [PAR_Licor](ERROR): PAR reading out of range: 0.000000 uMol/s/m2
2012-09-19T15:07:51.209Z,1348067271.209 [PAR_Licor](ERROR): PAR reading out of range: -0.022253 uMol/s/m2
2012-09-19T15:07:56.287Z,1348067276.286 [NavChartDb](INFO): Charting 2011p6
2012-09-19T15:07:59.887Z,1348067279.886 [NavChartDb](INFO): Charting 2194p5
2012-09-19T15:08:01.591Z,1348067281.591 [PAR_Licor](ERROR): PAR reading out of range: -0.027021 uMol/s/m2
2012-09-19T15:08:04.687Z,1348067284.687 [NavChartDb](INFO): Charting 2377p4
2012-09-19T15:08:05.774Z,1348067285.774 [PAR_Licor](ERROR): PAR reading out of range: -0.011126 uMol/s/m2
2012-09-19T15:08:07.486Z,1348067287.487 [NavChartDb](INFO): Charting 2560p3
2012-09-19T15:08:10.433Z,1348067290.433 [PAR_Licor](ERROR): PAR reading out of range: -0.025432 uMol/s/m2
2012-09-19T15:08:10.687Z,1348067290.687 [NavChartDb](INFO): Charting 2743p2
2012-09-19T15:08:12.554Z,1348067292.554 [PAR_Licor](ERROR): PAR reading out of range: -0.004768 uMol/s/m2
2012-09-19T15:08:17.874Z,1348067297.875 [PAR_Licor](ERROR): PAR reading out of range: -0.006358 uMol/s/m2
2012-09-19T15:08:18.935Z,1348067298.935 [NavChartDb](INFO): Charting 2926p0
2012-09-19T15:08:27.735Z,1348067307.735 [NavChartDb](INFO): Charting 3108p9
2012-09-19T15:08:28.737Z,1348067308.737 [PAR_Licor](ERROR): PAR reading out of range: -0.004768 uMol/s/m2
2012-09-19T15:08:29.544Z,1348067309.545 [PAR_Licor](ERROR): PAR reading out of range: -0.003179 uMol/s/m2
2012-09-19T15:08:34.535Z,1348067314.535 [NavChartDb](INFO): Charting 3291p8
2012-09-19T15:08:36.437Z,1348067316.437 [PAR_Licor](ERROR): PAR reading out of range: -0.020663 uMol/s/m2
2012-09-19T15:08:38.647Z,1348067318.647 [NavChartDb](INFO): Charting 3474p7
2012-09-19T15:08:42.950Z,1348067322.950 [PAR_Licor](ERROR): PAR reading out of range: -0.004768 uMol/s/m2
2012-09-19T15:08:43.846Z,1348067323.846 [NavChartDb](INFO): Charting 3657p6
2012-09-19T15:08:48.049Z,1348067328.049 [PAR_Licor](ERROR): PAR reading out of range: -0.011126 uMol/s/m2
2012-09-19T15:08:49.254Z,1348067329.253 [PAR_Licor](ERROR): PAR reading out of range: -0.036558 uMol/s/m2
2012-09-19T15:09:06.842Z,1348067346.842 [PAR_Licor](ERROR): PAR reading out of range: -0.006358 uMol/s/m2
2012-09-19T15:09:09.851Z,1348067349.851 [PAR_Licor](ERROR): PAR reading out of range: -0.001589 uMol/s/m2
2012-09-19T15:09:18.367Z,1348067358.367 [PAR_Licor](ERROR): PAR reading out of range: -0.012716 uMol/s/m2
2012-09-19T15:09:25.647Z,1348067365.647 [PAR_Licor](ERROR): PAR reading out of range: -0.019074 uMol/s/m2
2012-09-19T15:09:32.942Z,1348067372.941 [CBIT](INFO): Clearing failed count for component MassServo
2012-09-19T15:09:32.942Z,1348067372.942 [MassServo] No Fault, FailCount= 5
2012-09-19T15:09:33.127Z,1348067373.127 [MassServo](DEBUG): Initializing EZServoServo.
2012-09-19T15:09:33.247Z,1348067373.247 [MassServo](DEBUG): Initialization error opening port: port not yet opened
2012-09-19T15:09:33.248Z,1348067373.248 [MassServo](DEBUG): Initializing MassServo.
2012-09-19T15:09:35.423Z,1348067375.423 [PAR_Licor](ERROR): PAR reading out of range: -0.009537 uMol/s/m2
2012-09-19T15:09:37.155Z,1348067377.155 [PAR_Licor](ERROR): PAR reading out of range: -0.015895 uMol/s/m2
2012-09-19T15:09:37.250Z,1348067377.250 [MassServo](FAULT): Overload Error
2012-09-19T15:09:37.250Z,1348067377.250 [MassServo] Hardware Fault, FailCount= 1
2012-09-19T15:09:37.251Z,1348067377.251 [MassServo](ERROR): Hardware Fault
2012-09-19T15:09:37.274Z,1348067377.274 [CBIT](ERROR): Hardware Fault in component: MassServo
2012-09-19T15:09:37.503Z,1348067377.503 [MassServo](DEBUG): Uninitialize Mass Servo.
2012-09-19T15:09:37.503Z,1348067377.503 [MassServo](INFO): Powering down
2012-09-19T15:09:37.507Z,1348067377.507 [CBIT](INFO): Clearing failed state for component MassServo
2012-09-19T15:09:37.507Z,1348067377.507 [MassServo] No Fault, FailCount= 0
2012-09-19T15:09:37.844Z,1348067377.844 [MassServo](DEBUG): Initializing EZServoServo.
2012-09-19T15:09:37.964Z,1348067377.964 [MassServo](DEBUG): Initialization error opening port: port not yet opened
2012-09-19T15:09:37.964Z,1348067377.964 [MassServo](DEBUG): Initializing MassServo.
2012-09-19T15:09:41.734Z,1348067381.734 [MassServo](FAULT): Overload Error
2012-09-19T15:09:41.735Z,1348067381.735 [MassServo] Hardware Fault, FailCount= 1
2012-09-19T15:09:41.735Z,1348067381.735 [MassServo](ERROR): Hardware Fault
2012-09-19T15:09:41.759Z,1348067381.759 [CBIT](ERROR): Hardware Fault in component: MassServo
2012-09-19T15:09:42.075Z,1348067382.075 [MassServo](DEBUG): Uninitialize Mass Servo.
2012-09-19T15:09:42.075Z,1348067382.075 [MassServo](INFO): Powering down
2012-09-19T15:09:42.079Z,1348067382.079 [CBIT](INFO): Clearing failed state for component MassServo
2012-09-19T15:09:42.079Z,1348067382.079 [MassServo] No Fault, FailCount= 0
2012-09-19T15:09:42.472Z,1348067382.471 [MassServo](DEBUG): Initializing EZServoServo.
2012-09-19T15:09:42.591Z,1348067382.592 [MassServo](DEBUG): Initialization error opening port: port not yet opened
2012-09-19T15:09:42.592Z,1348067382.592 [MassServo](DEBUG): Initializing MassServo.
2012-09-19T15:09:42.810Z,1348067382.810 [PAR_Licor](ERROR): PAR reading out of range: -0.009537 uMol/s/m2
2012-09-19T15:09:44.013Z,1348067384.013 [PAR_Licor](ERROR): PAR reading out of range: -0.011126 uMol/s/m2
2012-09-19T15:09:46.391Z,1348067386.391 [MassServo](FAULT): Overload Error
2012-09-19T15:09:46.391Z,1348067386.391 [MassServo] Hardware Fault, FailCount= 1
2012-09-19T15:09:46.391Z,1348067386.391 [MassServo](ERROR): Hardware Fault
2012-09-19T15:09:46.414Z,1348067386.414 [CBIT](ERROR): Hardware Fault in component: MassServo
2012-09-19T15:09:46.711Z,1348067386.711 [MassServo](DEBUG): Uninitialize Mass Servo.
2012-09-19T15:09:46.711Z,1348067386.711 [MassServo](INFO): Powering down
2012-09-19T15:09:46.714Z,1348067386.714 [CBIT](INFO): Clearing failed state for component MassServo
2012-09-19T15:09:46.715Z,1348067386.714 [MassServo] No Fault, FailCount= 0
2012-09-19T15:09:47.219Z,1348067387.219 [MassServo](DEBUG): Initializing EZServoServo.
2012-09-19T15:09:47.340Z,1348067387.339 [MassServo](DEBUG): Initialization error opening port: port not yet opened
2012-09-19T15:09:47.340Z,1348067387.340 [MassServo](DEBUG): Initializing MassServo.
2012-09-19T15:09:50.966Z,1348067390.966 [PAR_Licor](ERROR): PAR reading out of range: -0.014305 uMol/s/m2
2012-09-19T15:09:51.446Z,1348067391.446 [MassServo](FAULT): Overload Error
2012-09-19T15:09:51.447Z,1348067391.447 [MassServo] Hardware Fault, FailCount= 1
2012-09-19T15:09:51.447Z,1348067391.447 [MassServo](ERROR): Hardware Fault
2012-09-19T15:09:51.470Z,1348067391.470 [CBIT](ERROR): Hardware Fault in component: MassServo
2012-09-19T15:09:51.831Z,1348067391.831 [MassServo](DEBUG): Uninitialize Mass Servo.
2012-09-19T15:09:51.831Z,1348067391.831 [MassServo](INFO): Powering down
2012-09-19T15:09:51.835Z,1348067391.835 [CBIT](INFO): Clearing failed state for component MassServo
2012-09-19T15:09:51.835Z,1348067391.835 [MassServo] No Fault, FailCount= 0
2012-09-19T15:09:52.235Z,1348067392.235 [MassServo](DEBUG): Initializing EZServoServo.
2012-09-19T15:09:52.356Z,1348067392.355 [MassServo](DEBUG): Initialization error opening port: port not yet opened
2012-09-19T15:09:52.356Z,1348067392.356 [MassServo](DEBUG): Initializing MassServo.
2012-09-19T15:09:56.090Z,1348067396.090 [MassServo](FAULT): Overload Error
2012-09-19T15:09:56.090Z,1348067396.091 [MassServo] Hardware Fault, FailCount= 1
2012-09-19T15:09:56.091Z,1348067396.091 [MassServo](ERROR): Hardware Fault
2012-09-19T15:09:56.113Z,1348067396.113 [CBIT](ERROR): Hardware Fault in component: MassServo
2012-09-19T15:09:56.531Z,1348067396.531 [MassServo](DEBUG): Uninitialize Mass Servo.
2012-09-19T15:09:56.531Z,1348067396.531 [MassServo](INFO): Powering down
2012-09-19T15:09:56.538Z,1348067396.538 [CBIT](INFO): Clearing failed state for component MassServo
2012-09-19T15:09:56.538Z,1348067396.538 [MassServo] No Fault, FailCount= 0
2012-09-19T15:09:56.940Z,1348067396.940 [MassServo](DEBUG): Initializing EZServoServo.
2012-09-19T15:09:57.060Z,1348067397.059 [MassServo](DEBUG): Initialization error opening port: port not yet opened
2012-09-19T15:09:57.060Z,1348067397.060 [MassServo](DEBUG): Initializing MassServo.
2012-09-19T15:10:01.151Z,1348067401.151 [MassServo](FAULT): Overload Error
2012-09-19T15:10:01.151Z,1348067401.151 [MassServo] Hardware Fault, FailCount= 1
2012-09-19T15:10:01.151Z,1348067401.151 [MassServo](ERROR): Hardware Fault
2012-09-19T15:10:01.174Z,1348067401.174 [CBIT](ERROR): Hardware Fault in component: MassServo
2012-09-19T15:10:02.047Z,1348067402.047 [MassServo](DEBUG): Uninitialize Mass Servo.
2012-09-19T15:10:02.047Z,1348067402.047 [MassServo](INFO): Powering down
2012-09-19T15:10:02.051Z,1348067402.051 [CBIT](INFO): Clearing failed state for component MassServo
2012-09-19T15:10:02.051Z,1348067402.051 [MassServo] No Fault, FailCount= 0
2012-09-19T15:10:02.201Z,1348067402.201 [MassServo](DEBUG): Initializing EZServoServo.
2012-09-19T15:10:02.331Z,1348067402.331 [MassServo](DEBUG): Initialization error opening port: port not yet opened
2012-09-19T15:10:02.331Z,1348067402.331 [MassServo](DEBUG): Initializing MassServo.
2012-09-19T15:10:05.954Z,1348067405.954 [MassServo](FAULT): Overload Error
2012-09-19T15:10:05.955Z,1348067405.955 [MassServo] Hardware Fault, FailCount= 1
2012-09-19T15:10:05.955Z,1348067405.955 [MassServo](ERROR): Hardware Fault
2012-09-19T15:10:05.958Z,1348067405.958 [CBIT](ERROR): Hardware Fault in component: MassServo
2012-09-19T15:10:06.099Z,1348067406.099 [MassServo](DEBUG): Uninitialize Mass Servo.
2012-09-19T15:10:06.099Z,1348067406.099 [MassServo](INFO): Powering down
2012-09-19T15:10:06.103Z,1348067406.103 [CBIT](INFO): Clearing failed state for component MassServo
2012-09-19T15:10:06.103Z,1348067406.103 [MassServo] No Fault, FailCount= 0
2012-09-19T15:10:06.496Z,1348067406.496 [MassServo](DEBUG): Initializing EZServoServo.
2012-09-19T15:10:06.615Z,1348067406.615 [MassServo](DEBUG): Initialization error opening port: port not yet opened
2012-09-19T15:10:06.615Z,1348067406.615 [MassServo](DEBUG): Initializing MassServo.
2012-09-19T15:10:08.034Z,1348067408.034 [PAR_Licor](ERROR): PAR reading out of range: -0.007947 uMol/s/m2
2012-09-19T15:10:08.834Z,1348067408.834 [PAR_Licor](ERROR): PAR reading out of range: -0.003179 uMol/s/m2
2012-09-19T15:10:10.258Z,1348067410.258 [MassServo](FAULT): Overload Error
2012-09-19T15:10:10.259Z,1348067410.259 [MassServo] Hardware Fault, FailCount= 1
2012-09-19T15:10:10.259Z,1348067410.259 [MassServo](ERROR): Hardware Fault
2012-09-19T15:10:10.282Z,1348067410.282 [CBIT](ERROR): Hardware Fault in component: MassServo
2012-09-19T15:10:10.435Z,1348067410.435 [MassServo](DEBUG): Uninitialize Mass Servo.
2012-09-19T15:10:10.435Z,1348067410.435 [MassServo](INFO): Powering down
2012-09-19T15:10:10.439Z,1348067410.439 [CBIT](INFO): Clearing failed state for component MassServo
2012-09-19T15:10:10.440Z,1348067410.440 [MassServo] No Fault, FailCount= 0
2012-09-19T15:10:10.836Z,1348067410.836 [MassServo](DEBUG): Initializing EZServoServo.
2012-09-19T15:10:10.952Z,1348067410.952 [MassServo](DEBUG): Initialization error opening port: port not yet opened
2012-09-19T15:10:10.952Z,1348067410.952 [MassServo](DEBUG): Initializing MassServo.
2012-09-19T15:10:12.385Z,1348067412.385 [PAR_Licor](ERROR): PAR reading out of range: -0.020663 uMol/s/m2
2012-09-19T15:10:14.086Z,1348067414.086 [PAR_Licor](ERROR): PAR reading out of range: -0.066759 uMol/s/m2
2012-09-19T15:10:14.706Z,1348067414.706 [MassServo](FAULT): Overload Error
2012-09-19T15:10:14.707Z,1348067414.707 [MassServo] Hardware Fault, FailCount= 1
2012-09-19T15:10:14.707Z,1348067414.707 [MassServo](ERROR): Hardware Fault
2012-09-19T15:10:14.731Z,1348067414.731 [CBIT](ERROR): Hardware Fault in component: MassServo
2012-09-19T15:10:15.087Z,1348067415.087 [MassServo](DEBUG): Uninitialize Mass Servo.
2012-09-19T15:10:15.087Z,1348067415.087 [MassServo](INFO): Powering down
2012-09-19T15:10:15.090Z,1348067415.091 [CBIT](INFO): Clearing failed state for component MassServo
2012-09-19T15:10:15.091Z,1348067415.091 [MassServo] No Fault, FailCount= 0
2012-09-19T15:10:15.484Z,1348067415.484 [MassServo](DEBUG): Initializing EZServoServo.
2012-09-19T15:10:15.603Z,1348067415.603 [MassServo](DEBUG): Initialization error opening port: port not yet opened
2012-09-19T15:10:15.604Z,1348067415.604 [MassServo](DEBUG): Initializing MassServo.
2012-09-19T15:10:19.414Z,1348067419.414 [MassServo](FAULT): Overload Error
2012-09-19T15:10:19.415Z,1348067419.415 [MassServo] Hardware Fault, FailCount= 1
2012-09-19T15:10:19.415Z,1348067419.415 [MassServo](ERROR): Hardware Fault
2012-09-19T15:10:19.438Z,1348067419.438 [CBIT](ERROR): Hardware Fault in component: MassServo
2012-09-19T15:10:19.803Z,1348067419.803 [MassServo](DEBUG): Uninitialize Mass Servo.
2012-09-19T15:10:19.803Z,1348067419.803 [MassServo](INFO): Powering down
2012-09-19T15:10:19.807Z,1348067419.807 [CBIT](INFO): Clearing failed state for component MassServo
2012-09-19T15:10:19.807Z,1348067419.807 [MassServo] No Fault, FailCount= 0
2012-09-19T15:10:20.163Z,1348067420.163 [MassServo](DEBUG): Initializing EZServoServo.
2012-09-19T15:10:20.283Z,1348067420.283 [MassServo](DEBUG): Initialization error opening port: port not yet opened
2012-09-19T15:10:20.284Z,1348067420.284 [MassServo](DEBUG): Initializing MassServo.
2012-09-19T15:10:24.454Z,1348067424.454 [MassServo](FAULT): Overload Error
2012-09-19T15:10:24.455Z,1348067424.455 [MassServo] Hardware Fault, FailCount= 1
2012-09-19T15:10:24.455Z,1348067424.455 [MassServo](ERROR): Hardware Fault
2012-09-19T15:10:24.478Z,1348067424.478 [CBIT](ERROR): Hardware Fault in component: MassServo
2012-09-19T15:10:24.831Z,1348067424.831 [MassServo](DEBUG): Uninitialize Mass Servo.
2012-09-19T15:10:24.831Z,1348067424.831 [MassServo](INFO): Powering down
2012-09-19T15:10:24.835Z,1348067424.835 [CBIT](INFO): Clearing failed state for component MassServo
2012-09-19T15:10:24.835Z,1348067424.835 [MassServo] No Fault, FailCount= 0
2012-09-19T15:10:25.231Z,1348067425.231 [MassServo](DEBUG): Initializing EZServoServo.
2012-09-19T15:10:25.352Z,1348067425.352 [MassServo](DEBUG): Initialization error opening port: port not yet opened
2012-09-19T15:10:25.352Z,1348067425.352 [MassServo](DEBUG): Initializing MassServo.
2012-09-19T15:10:29.175Z,1348067429.174 [MassServo](FAULT): Overload Error
2012-09-19T15:10:29.175Z,1348067429.175 [MassServo] Hardware Fault, FailCount= 1
2012-09-19T15:10:29.175Z,1348067429.175 [MassServo](ERROR): Hardware Fault
2012-09-19T15:10:29.198Z,1348067429.198 [CBIT](ERROR): Hardware Fault in component: MassServo
2012-09-19T15:10:29.559Z,1348067429.559 [MassServo](DEBUG): Uninitialize Mass Servo.
2012-09-19T15:10:29.559Z,1348067429.559 [MassServo](INFO): Powering down
2012-09-19T15:10:29.563Z,1348067429.563 [CBIT](INFO): Clearing failed state for component MassServo
2012-09-19T15:10:29.563Z,1348067429.563 [MassServo] No Fault, FailCount= 0
2012-09-19T15:10:29.959Z,1348067429.959 [MassServo](DEBUG): Initializing EZServoServo.
2012-09-19T15:10:30.079Z,1348067430.079 [MassServo](DEBUG): Initialization error opening port: port not yet opened
2012-09-19T15:10:30.080Z,1348067430.080 [MassServo](DEBUG): Initializing MassServo.
2012-09-19T15:10:33.818Z,1348067433.818 [MassServo](FAULT): Overload Error
2012-09-19T15:10:33.819Z,1348067433.819 [MassServo] Hardware Fault, FailCount= 1
2012-09-19T15:10:33.819Z,1348067433.819 [MassServo](ERROR): Hardware Fault
2012-09-19T15:10:33.842Z,1348067433.842 [CBIT](ERROR): Hardware Fault in component: MassServo
2012-09-19T15:10:34.202Z,1348067434.202 [MassServo](DEBUG): Uninitialize Mass Servo.
2012-09-19T15:10:34.202Z,1348067434.202 [MassServo](INFO): Powering down
2012-09-19T15:10:34.205Z,1348067434.205 [CBIT](INFO): Clearing failed state for component MassServo
2012-09-19T15:10:34.205Z,1348067434.205 [MassServo] No Fault, FailCount= 0
2012-09-19T15:10:34.683Z,1348067434.683 [MassServo](DEBUG): Initializing EZServoServo.
2012-09-19T15:10:34.803Z,1348067434.803 [MassServo](DEBUG): Initialization error opening port: port not yet opened
2012-09-19T15:10:34.804Z,1348067434.804 [MassServo](DEBUG): Initializing MassServo.
2012-09-19T15:10:38.450Z,1348067438.450 [MassServo](FAULT): Overload Error
2012-09-19T15:10:38.451Z,1348067438.451 [MassServo] Hardware Fault, FailCount= 1
2012-09-19T15:10:38.451Z,1348067438.451 [MassServo](ERROR): Hardware Fault
2012-09-19T15:10:38.474Z,1348067438.474 [CBIT](ERROR): Hardware Fault in component: MassServo
2012-09-19T15:10:38.831Z,1348067438.831 [MassServo](DEBUG): Uninitialize Mass Servo.
2012-09-19T15:10:38.831Z,1348067438.832 [MassServo](INFO): Powering down
2012-09-19T15:10:38.835Z,1348067438.835 [CBIT](INFO): Clearing failed state for component MassServo
2012-09-19T15:10:38.835Z,1348067438.835 [MassServo] No Fault, FailCount= 0
2012-09-19T15:10:39.755Z,1348067439.755 [MassServo](DEBUG): Initializing EZServoServo.
2012-09-19T15:10:39.876Z,1348067439.876 [MassServo](DEBUG): Initialization error opening port: port not yet opened
2012-09-19T15:10:39.876Z,1348067439.876 [MassServo](DEBUG): Initializing MassServo.
2012-09-19T15:10:44.151Z,1348067444.151 [MassServo](FAULT): Overload Error
2012-09-19T15:10:44.151Z,1348067444.151 [MassServo] Hardware Fault, FailCount= 1
2012-09-19T15:10:44.151Z,1348067444.151 [MassServo](ERROR): Hardware Fault
2012-09-19T15:10:44.174Z,1348067444.174 [CBIT](ERROR): Hardware Fault in component: MassServo
2012-09-19T15:10:44.319Z,1348067444.319 [MassServo](DEBUG): Uninitialize Mass Servo.
2012-09-19T15:10:44.319Z,1348067444.319 [MassServo](INFO): Powering down
2012-09-19T15:10:44.323Z,1348067444.323 [CBIT](INFO): Clearing failed state for component MassServo
2012-09-19T15:10:44.323Z,1348067444.323 [MassServo] No Fault, FailCount= 0
2012-09-19T15:10:44.759Z,1348067444.759 [MassServo](DEBUG): Initializing EZServoServo.
2012-09-19T15:10:44.879Z,1348067444.879 [MassServo](DEBUG): Initialization error opening port: port not yet opened
2012-09-19T15:10:44.880Z,1348067444.880 [MassServo](DEBUG): Initializing MassServo.
2012-09-19T15:10:48.646Z,1348067448.647 [MassServo](FAULT): Overload Error
2012-09-19T15:10:48.647Z,1348067448.647 [MassServo] Hardware Fault, FailCount= 1
2012-09-19T15:10:48.647Z,1348067448.647 [MassServo](ERROR): Hardware Fault
2012-09-19T15:10:48.670Z,1348067448.670 [CBIT](ERROR): Hardware Fault in component: MassServo
2012-09-19T15:10:49.071Z,1348067449.071 [MassServo](DEBUG): Uninitialize Mass Servo.
2012-09-19T15:10:49.071Z,1348067449.071 [MassServo](INFO): Powering down
2012-09-19T15:10:49.075Z,1348067449.075 [CBIT](INFO): Clearing failed state for component MassServo
2012-09-19T15:10:49.075Z,1348067449.075 [MassServo] No Fault, FailCount= 0
2012-09-19T15:10:49.496Z,1348067449.496 [MassServo](DEBUG): Initializing EZServoServo.
2012-09-19T15:10:49.615Z,1348067449.615 [MassServo](DEBUG): Initialization error opening port: port not yet opened
2012-09-19T15:10:49.616Z,1348067449.616 [MassServo](DEBUG): Initializing MassServo.
2012-09-19T15:10:53.779Z,1348067453.779 [MassServo](FAULT): Overload Error
2012-09-19T15:10:53.779Z,1348067453.779 [MassServo] Hardware Fault, FailCount= 1
2012-09-19T15:10:53.779Z,1348067453.779 [MassServo](ERROR): Hardware Fault
2012-09-19T15:10:53.802Z,1348067453.802 [CBIT](ERROR): Hardware Fault in component: MassServo
2012-09-19T15:10:54.108Z,1348067454.108 [MassServo](DEBUG): Uninitialize Mass Servo.
2012-09-19T15:10:54.108Z,1348067454.108 [MassServo](INFO): Powering down
2012-09-19T15:10:54.111Z,1348067454.111 [CBIT](INFO): Clearing failed state for component MassServo
2012-09-19T15:10:54.111Z,1348067454.111 [MassServo] No Fault, FailCount= 0
2012-09-19T15:10:54.507Z,1348067454.507 [MassServo](DEBUG): Initializing EZServoServo.
2012-09-19T15:10:54.628Z,1348067454.628 [MassServo](DEBUG): Initialization error opening port: port not yet opened
2012-09-19T15:10:54.628Z,1348067454.628 [MassServo](DEBUG): Initializing MassServo.
2012-09-19T15:10:57.547Z,1348067457.547 [PAR_Licor](ERROR): PAR reading out of range: 0.000000 uMol/s/m2
2012-09-19T15:10:58.839Z,1348067458.839 [MassServo](FAULT): Overload Error
2012-09-19T15:10:58.839Z,1348067458.839 [MassServo] Hardware Fault, FailCount= 1
2012-09-19T15:10:58.839Z,1348067458.839 [MassServo](ERROR): Hardware Fault
2012-09-19T15:10:58.862Z,1348067458.862 [CBIT](ERROR): Hardware Fault in component: MassServo
2012-09-19T15:10:59.251Z,1348067459.251 [MassServo](DEBUG): Uninitialize Mass Servo.
2012-09-19T15:10:59.251Z,1348067459.251 [MassServo](INFO): Powering down
2012-09-19T15:10:59.255Z,1348067459.255 [CBIT](INFO): Clearing failed state for component MassServo
2012-09-19T15:10:59.255Z,1348067459.255 [MassServo] No Fault, FailCount= 0
2012-09-19T15:10:59.595Z,1348067459.595 [MassServo](DEBUG): Initializing EZServoServo.
2012-09-19T15:10:59.715Z,1348067459.716 [MassServo](DEBUG): Initialization error opening port: port not yet opened
2012-09-19T15:10:59.716Z,1348067459.716 [MassServo](DEBUG): Initializing MassServo.
2012-09-19T15:11:02.210Z,1348067462.210 [Default:CallIridium] Running Loop=1
2012-09-19T15:11:02.210Z,1348067462.210 [Default:CallIridium](INFO): Aggregate::initialize Default:CallIridium
2012-09-19T15:11:02.214Z,1348067462.214 [Default:CallIridium:A] Running Loop=1
2012-09-19T15:11:02.216Z,1348067462.216 [Default:CallIridium:A] Stopped
2012-09-19T15:11:02.216Z,1348067462.216 [Default:CallIridium:B] Running Loop=1
2012-09-19T15:11:02.216Z,1348067462.217 [Default:CallIridium:B](INFO): Aggregate::initialize Default:CallIridium:B
2012-09-19T15:11:03.842Z,1348067463.842 [MassServo](FAULT): Overload Error
2012-09-19T15:11:03.843Z,1348067463.843 [MassServo] Hardware Fault, FailCount= 1
2012-09-19T15:11:03.843Z,1348067463.843 [MassServo](ERROR): Hardware Fault
2012-09-19T15:11:03.866Z,1348067463.866 [CBIT](ERROR): Hardware Fault in component: MassServo
2012-09-19T15:11:04.723Z,1348067464.723 [MassServo](DEBUG): Uninitialize Mass Servo.
2012-09-19T15:11:04.723Z,1348067464.723 [MassServo](INFO): Powering down
2012-09-19T15:11:04.726Z,1348067464.727 [CBIT](INFO): Clearing failed state for component MassServo
2012-09-19T15:11:04.727Z,1348067464.727 [MassServo] No Fault, FailCount= 0
2012-09-19T15:11:04.863Z,1348067464.863 [MassServo](DEBUG): Initializing EZServoServo.
2012-09-19T15:11:04.984Z,1348067464.984 [MassServo](DEBUG): Initialization error opening port: port not yet opened
2012-09-19T15:11:04.984Z,1348067464.984 [MassServo](DEBUG): Initializing MassServo.
2012-09-19T15:11:08.982Z,1348067468.982 [MassServo](FAULT): Overload Error
2012-09-19T15:11:08.983Z,1348067468.983 [MassServo] Hardware Fault, FailCount= 1
2012-09-19T15:11:08.983Z,1348067468.983 [MassServo](ERROR): Hardware Fault
2012-09-19T15:11:09.005Z,1348067469.005 [CBIT](ERROR): Hardware Fault in component: MassServo
2012-09-19T15:11:09.147Z,1348067469.147 [MassServo](DEBUG): Uninitialize Mass Servo.
2012-09-19T15:11:09.147Z,1348067469.147 [MassServo](INFO): Powering down
2012-09-19T15:11:09.150Z,1348067469.151 [CBIT](INFO): Clearing failed state for component MassServo
2012-09-19T15:11:09.151Z,1348067469.151 [MassServo] No Fault, FailCount= 0
2012-09-19T15:11:09.567Z,1348067469.567 [MassServo](DEBUG): Initializing EZServoServo.
2012-09-19T15:11:09.688Z,1348067469.688 [MassServo](DEBUG): Initialization error opening port: port not yet opened
2012-09-19T15:11:09.688Z,1348067469.688 [MassServo](DEBUG): Initializing MassServo.
2012-09-19T15:11:13.423Z,1348067473.422 [MassServo](FAULT): Overload Error
2012-09-19T15:11:13.423Z,1348067473.423 [MassServo] Hardware Fault, FailCount= 1
2012-09-19T15:11:13.423Z,1348067473.423 [MassServo](ERROR): Hardware Fault
2012-09-19T15:11:13.446Z,1348067473.446 [CBIT](ERROR): Hardware Fault in component: MassServo
2012-09-19T15:11:13.799Z,1348067473.799 [MassServo](DEBUG): Uninitialize Mass Servo.
2012-09-19T15:11:13.799Z,1348067473.799 [MassServo](INFO): Powering down
2012-09-19T15:11:13.803Z,1348067473.803 [CBIT](INFO): Clearing failed state for component MassServo
2012-09-19T15:11:13.803Z,1348067473.803 [MassServo] No Fault, FailCount= 0
2012-09-19T15:11:14.202Z,1348067474.202 [MassServo](DEBUG): Initializing EZServoServo.
2012-09-19T15:11:14.319Z,1348067474.319 [MassServo](DEBUG): Initialization error opening port: port not yet opened
2012-09-19T15:11:14.320Z,1348067474.320 [MassServo](DEBUG): Initializing MassServo.
2012-09-19T15:11:18.499Z,1348067478.499 [MassServo](FAULT): Overload Error
2012-09-19T15:11:18.499Z,1348067478.499 [MassServo] Hardware Fault, FailCount= 1
2012-09-19T15:11:18.499Z,1348067478.499 [MassServo](ERROR): Hardware Fault
2012-09-19T15:11:18.522Z,1348067478.522 [CBIT](ERROR): Hardware Fault in component: MassServo
2012-09-19T15:11:18.875Z,1348067478.875 [MassServo](DEBUG): Uninitialize Mass Servo.
2012-09-19T15:11:18.875Z,1348067478.875 [MassServo](INFO): Powering down
2012-09-19T15:11:18.879Z,1348067478.879 [CBIT](INFO): Clearing failed state for component MassServo
2012-09-19T15:11:18.879Z,1348067478.879 [MassServo] No Fault, FailCount= 0
2012-09-19T15:11:19.279Z,1348067479.279 [MassServo](DEBUG): Initializing EZServoServo.
2012-09-19T15:11:19.415Z,1348067479.415 [MassServo](DEBUG): Initialization error opening port: port not yet opened
2012-09-19T15:11:19.415Z,1348067479.415 [MassServo](DEBUG): Initializing MassServo.
2012-09-19T15:11:23.142Z,1348067483.142 [MassServo](FAULT): Overload Error
2012-09-19T15:11:23.143Z,1348067483.143 [MassServo] Hardware Fault, FailCount= 1
2012-09-19T15:11:23.143Z,1348067483.143 [MassServo](ERROR): Hardware Fault
2012-09-19T15:11:23.166Z,1348067483.166 [CBIT](ERROR): Hardware Fault in component: MassServo
2012-09-19T15:11:23.523Z,1348067483.523 [MassServo](DEBUG): Uninitialize Mass Servo.
2012-09-19T15:11:23.523Z,1348067483.523 [MassServo](INFO): Powering down
2012-09-19T15:11:23.526Z,1348067483.526 [CBIT](INFO): Clearing failed state for component MassServo
2012-09-19T15:11:23.527Z,1348067483.527 [MassServo] No Fault, FailCount= 0
2012-09-19T15:11:23.923Z,1348067483.923 [MassServo](DEBUG): Initializing EZServoServo.
2012-09-19T15:11:24.043Z,1348067484.043 [MassServo](DEBUG): Initialization error opening port: port not yet opened
2012-09-19T15:11:24.044Z,1348067484.044 [MassServo](DEBUG): Initializing MassServo.
2012-09-19T15:11:26.598Z,1348067486.598 [PAR_Licor](ERROR): PAR reading out of range: -0.022253 uMol/s/m2
2012-09-19T15:11:28.655Z,1348067488.655 [MassServo](FAULT): Overload Error
2012-09-19T15:11:28.655Z,1348067488.655 [MassServo] Hardware Fault, FailCount= 1
2012-09-19T15:11:28.655Z,1348067488.655 [MassServo](ERROR): Hardware Fault
2012-09-19T15:11:28.678Z,1348067488.678 [CBIT](ERROR): Hardware Fault in component: MassServo
2012-09-19T15:11:29.036Z,1348067489.036 [MassServo](DEBUG): Uninitialize Mass Servo.
2012-09-19T15:11:29.036Z,1348067489.036 [MassServo](INFO): Powering down
2012-09-19T15:11:29.039Z,1348067489.039 [CBIT](INFO): Clearing failed state for component MassServo
2012-09-19T15:11:29.039Z,1348067489.039 [MassServo] No Fault, FailCount= 0
2012-09-19T15:11:29.951Z,1348067489.951 [MassServo](DEBUG): Initializing EZServoServo.
2012-09-19T15:11:30.071Z,1348067490.071 [MassServo](DEBUG): Initialization error opening port: port not yet opened
2012-09-19T15:11:30.071Z,1348067490.071 [MassServo](DEBUG): Initializing MassServo.
2012-09-19T15:11:34.335Z,1348067494.335 [MassServo](FAULT): Overload Error
2012-09-19T15:11:34.335Z,1348067494.335 [MassServo] Hardware Fault, FailCount= 1
2012-09-19T15:11:34.335Z,1348067494.335 [MassServo](ERROR): Hardware Fault
2012-09-19T15:11:34.358Z,1348067494.358 [CBIT](ERROR): Hardware Fault in component: MassServo
2012-09-19T15:11:34.499Z,1348067494.499 [MassServo](DEBUG): Uninitialize Mass Servo.
2012-09-19T15:11:34.499Z,1348067494.499 [MassServo](INFO): Powering down
2012-09-19T15:11:34.503Z,1348067494.503 [CBIT](INFO): Clearing failed state for component MassServo
2012-09-19T15:11:34.503Z,1348067494.503 [MassServo] No Fault, FailCount= 0
2012-09-19T15:11:34.895Z,1348067494.895 [MassServo](DEBUG): Initializing EZServoServo.
2012-09-19T15:11:35.015Z,1348067495.016 [MassServo](DEBUG): Initialization error opening port: port not yet opened
2012-09-19T15:11:35.016Z,1348067495.016 [MassServo](DEBUG): Initializing MassServo.
2012-09-19T15:11:39.018Z,1348067499.018 [MassServo](FAULT): Overload Error
2012-09-19T15:11:39.019Z,1348067499.019 [MassServo] Hardware Fault, FailCount= 1
2012-09-19T15:11:39.019Z,1348067499.019 [MassServo](ERROR): Hardware Fault
2012-09-19T15:11:39.042Z,1348067499.042 [CBIT](ERROR): Hardware Fault in component: MassServo
2012-09-19T15:11:39.120Z,1348067499.120 [PAR_Licor](ERROR): PAR reading out of range: 0.000000 uMol/s/m2
2012-09-19T15:11:39.192Z,1348067499.192 [MassServo](DEBUG): Uninitialize Mass Servo.
2012-09-19T15:11:39.192Z,1348067499.192 [MassServo](INFO): Powering down
2012-09-19T15:11:39.196Z,1348067499.196 [CBIT](INFO): Clearing failed state for component MassServo
2012-09-19T15:11:39.196Z,1348067499.196 [MassServo] No Fault, FailCount= 0
2012-09-19T15:11:39.587Z,1348067499.587 [MassServo](DEBUG): Initializing EZServoServo.
2012-09-19T15:11:39.707Z,1348067499.707 [MassServo](DEBUG): Initialization error opening port: port not yet opened
2012-09-19T15:11:39.708Z,1348067499.708 [MassServo](DEBUG): Initializing MassServo.
2012-09-19T15:11:41.117Z,1348067501.117 [PAR_Licor](ERROR): PAR reading out of range: -0.006358 uMol/s/m2
2012-09-19T15:11:42.317Z,1348067502.318 [PAR_Licor](ERROR): PAR reading out of range: -0.020663 uMol/s/m2
2012-09-19T15:11:43.379Z,1348067503.378 [MassServo](FAULT): Overload Error
2012-09-19T15:11:43.379Z,1348067503.379 [MassServo] Hardware Fault, FailCount= 1
2012-09-19T15:11:43.379Z,1348067503.379 [MassServo](ERROR): Hardware Fault
2012-09-19T15:11:43.402Z,1348067503.402 [CBIT](ERROR): Hardware Fault in component: MassServo
2012-09-19T15:11:43.559Z,1348067503.559 [MassServo](DEBUG): Uninitialize Mass Servo.
2012-09-19T15:11:43.559Z,1348067503.559 [MassServo](INFO): Powering down
2012-09-19T15:11:43.563Z,1348067503.563 [CBIT](INFO): Clearing failed state for component MassServo
2012-09-19T15:11:43.563Z,1348067503.563 [MassServo] No Fault, FailCount= 0
2012-09-19T15:11:43.943Z,1348067503.943 [MassServo](DEBUG): Initializing EZServoServo.
2012-09-19T15:11:44.064Z,1348067504.064 [MassServo](DEBUG): Initialization error opening port: port not yet opened
2012-09-19T15:11:44.064Z,1348067504.064 [MassServo](DEBUG): Initializing MassServo.
2012-09-19T15:11:44.679Z,1348067504.679 [PAR_Licor](ERROR): PAR reading out of range: 0.000000 uMol/s/m2
2012-09-19T15:11:45.881Z,1348067505.881 [PAR_Licor](ERROR): PAR reading out of range: -0.047685 uMol/s/m2
2012-09-19T15:11:47.835Z,1348067507.835 [MassServo](FAULT): Overload Error
2012-09-19T15:11:47.835Z,1348067507.835 [MassServo] Hardware Fault, FailCount= 1
2012-09-19T15:11:47.835Z,1348067507.835 [MassServo](ERROR): Hardware Fault
2012-09-19T15:11:47.858Z,1348067507.858 [CBIT](ERROR): Hardware Fault in component: MassServo
2012-09-19T15:11:48.215Z,1348067508.215 [MassServo](DEBUG): Uninitialize Mass Servo.
2012-09-19T15:11:48.215Z,1348067508.215 [MassServo](INFO): Powering down
2012-09-19T15:11:48.219Z,1348067508.218 [CBIT](INFO): Clearing failed state for component MassServo
2012-09-19T15:11:48.219Z,1348067508.219 [MassServo] No Fault, FailCount= 0
2012-09-19T15:11:48.615Z,1348067508.615 [MassServo](DEBUG): Initializing EZServoServo.
2012-09-19T15:11:48.759Z,1348067508.759 [MassServo](DEBUG): Initialization error opening port: port not yet opened
2012-09-19T15:11:48.759Z,1348067508.759 [MassServo](DEBUG): Initializing MassServo.
2012-09-19T15:11:49.369Z,1348067509.369 [PAR_Licor](ERROR): PAR reading out of range: -0.004768 uMol/s/m2
2012-09-19T15:11:52.486Z,1348067512.487 [MassServo](FAULT): Overload Error
2012-09-19T15:11:52.487Z,1348067512.487 [MassServo] Hardware Fault, FailCount= 1
2012-09-19T15:11:52.487Z,1348067512.487 [MassServo](ERROR): Hardware Fault
2012-09-19T15:11:52.510Z,1348067512.510 [CBIT](ERROR): Hardware Fault in component: MassServo
2012-09-19T15:11:52.883Z,1348067512.883 [MassServo](DEBUG): Uninitialize Mass Servo.
2012-09-19T15:11:52.883Z,1348067512.883 [MassServo](INFO): Powering down
2012-09-19T15:11:52.887Z,1348067512.886 [CBIT](INFO): Clearing failed state for component MassServo
2012-09-19T15:11:52.887Z,1348067512.887 [MassServo] No Fault, FailCount= 0
2012-09-19T15:11:53.263Z,1348067513.263 [MassServo](DEBUG): Initializing EZServoServo.
2012-09-19T15:11:53.380Z,1348067513.379 [MassServo](DEBUG): Initialization error opening port: port not yet opened
2012-09-19T15:11:53.380Z,1348067513.380 [MassServo](DEBUG): Initializing MassServo.
2012-09-19T15:11:57.607Z,1348067517.606 [MassServo](FAULT): Overload Error
2012-09-19T15:11:57.607Z,1348067517.607 [MassServo] Hardware Fault, FailCount= 1
2012-09-19T15:11:57.607Z,1348067517.607 [MassServo](ERROR): Hardware Fault
2012-09-19T15:11:57.630Z,1348067517.630 [CBIT](ERROR): Hardware Fault in component: MassServo
2012-09-19T15:11:57.987Z,1348067517.987 [MassServo](DEBUG): Uninitialize Mass Servo.
2012-09-19T15:11:57.987Z,1348067517.987 [MassServo](INFO): Powering down
2012-09-19T15:11:57.990Z,1348067517.990 [CBIT](INFO): Clearing failed state for component MassServo
2012-09-19T15:11:57.991Z,1348067517.991 [MassServo] No Fault, FailCount= 0
2012-09-19T15:11:58.384Z,1348067518.384 [MassServo](DEBUG): Initializing EZServoServo.
2012-09-19T15:11:58.503Z,1348067518.503 [MassServo](DEBUG): Initialization error opening port: port not yet opened
2012-09-19T15:11:58.504Z,1348067518.504 [MassServo](DEBUG): Initializing MassServo.
2012-09-19T15:12:02.646Z,1348067522.646 [MassServo](FAULT): Overload Error
2012-09-19T15:12:02.646Z,1348067522.647 [MassServo] Hardware Fault, FailCount= 1
2012-09-19T15:12:02.646Z,1348067522.647 [MassServo](ERROR): Hardware Fault
2012-09-19T15:12:02.670Z,1348067522.670 [CBIT](ERROR): Hardware Fault in component: MassServo
2012-09-19T15:12:03.023Z,1348067523.023 [MassServo](DEBUG): Uninitialize Mass Servo.
2012-09-19T15:12:03.023Z,1348067523.023 [MassServo](INFO): Powering down
2012-09-19T15:12:03.027Z,1348067523.027 [CBIT](INFO): Clearing failed state for component MassServo
2012-09-19T15:12:03.027Z,1348067523.027 [MassServo] No Fault, FailCount= 0
2012-09-19T15:12:03.923Z,1348067523.923 [MassServo](DEBUG): Initializing EZServoServo.
2012-09-19T15:12:04.043Z,1348067524.043 [MassServo](DEBUG): Initialization error opening port: port not yet opened
2012-09-19T15:12:04.044Z,1348067524.044 [MassServo](DEBUG): Initializing MassServo.
2012-09-19T15:12:08.307Z,1348067528.307 [MassServo](FAULT): Overload Error
2012-09-19T15:12:08.307Z,1348067528.307 [MassServo] Hardware Fault, FailCount= 1
2012-09-19T15:12:08.307Z,1348067528.307 [MassServo](ERROR): Hardware Fault
2012-09-19T15:12:08.330Z,1348067528.330 [CBIT](ERROR): Hardware Fault in component: MassServo
2012-09-19T15:12:08.559Z,1348067528.559 [MassServo](DEBUG): Uninitialize Mass Servo.
2012-09-19T15:12:08.560Z,1348067528.560 [MassServo](INFO): Powering down
2012-09-19T15:12:08.563Z,1348067528.563 [CBIT](INFO): Clearing failed state for component MassServo
2012-09-19T15:12:08.563Z,1348067528.563 [MassServo] No Fault, FailCount= 0
2012-09-19T15:12:08.951Z,1348067528.951 [MassServo](DEBUG): Initializing EZServoServo.
2012-09-19T15:12:09.087Z,1348067529.087 [MassServo](DEBUG): Initialization error opening port: port not yet opened
2012-09-19T15:12:09.087Z,1348067529.087 [MassServo](DEBUG): Initializing MassServo.
2012-09-19T15:12:09.633Z,1348067529.633 [PAR_Licor](ERROR): PAR reading out of range: -0.038148 uMol/s/m2
2012-09-19T15:12:10.830Z,1348067530.830 [PAR_Licor](ERROR): PAR reading out of range: -0.011126 uMol/s/m2
2012-09-19T15:12:12.549Z,1348067532.549 [PAR_Licor](ERROR): PAR reading out of range: -0.003179 uMol/s/m2
2012-09-19T15:12:12.655Z,1348067532.655 [MassServo](FAULT): Overload Error
2012-09-19T15:12:12.655Z,1348067532.655 [MassServo] Hardware Fault, FailCount= 1
2012-09-19T15:12:12.655Z,1348067532.655 [MassServo](ERROR): Hardware Fault
2012-09-19T15:12:12.662Z,1348067532.662 [CBIT](ERROR): Hardware Fault in component: MassServo
2012-09-19T15:12:12.827Z,1348067532.827 [MassServo](DEBUG): Uninitialize Mass Servo.
2012-09-19T15:12:12.827Z,1348067532.828 [MassServo](INFO): Powering down
2012-09-19T15:12:12.831Z,1348067532.831 [CBIT](INFO): Clearing failed state for component MassServo
2012-09-19T15:12:12.831Z,1348067532.831 [MassServo] No Fault, FailCount= 0
2012-09-19T15:12:13.223Z,1348067533.223 [MassServo](DEBUG): Initializing EZServoServo.
2012-09-19T15:12:13.344Z,1348067533.344 [MassServo](DEBUG): Initialization error opening port: port not yet opened
2012-09-19T15:12:13.344Z,1348067533.344 [MassServo](DEBUG): Initializing MassServo.
2012-09-19T15:12:16.905Z,1348067536.905 [PAR_Licor](ERROR): PAR reading out of range: -0.004768 uMol/s/m2
2012-09-19T15:12:16.986Z,1348067536.986 [MassServo](FAULT): Overload Error
2012-09-19T15:12:16.987Z,1348067536.987 [MassServo] Hardware Fault, FailCount= 1
2012-09-19T15:12:16.987Z,1348067536.987 [MassServo](ERROR): Hardware Fault
2012-09-19T15:12:17.010Z,1348067537.010 [CBIT](ERROR): Hardware Fault in component: MassServo
2012-09-19T15:12:17.191Z,1348067537.191 [MassServo](DEBUG): Uninitialize Mass Servo.
2012-09-19T15:12:17.191Z,1348067537.191 [MassServo](INFO): Powering down
2012-09-19T15:12:17.194Z,1348067537.194 [CBIT](INFO): Clearing failed state for component MassServo
2012-09-19T15:12:17.195Z,1348067537.195 [MassServo] No Fault, FailCount= 0
2012-09-19T15:12:17.612Z,1348067537.612 [MassServo](DEBUG): Initializing EZServoServo.
2012-09-19T15:12:17.731Z,1348067537.731 [MassServo](DEBUG): Initialization error opening port: port not yet opened
2012-09-19T15:12:17.732Z,1348067537.731 [MassServo](DEBUG): Initializing MassServo.
2012-09-19T15:12:21.423Z,1348067541.422 [MassServo](FAULT): Overload Error
2012-09-19T15:12:21.423Z,1348067541.423 [MassServo] Hardware Fault, FailCount= 1
2012-09-19T15:12:21.423Z,1348067541.423 [MassServo](ERROR): Hardware Fault
2012-09-19T15:12:21.446Z,1348067541.446 [CBIT](ERROR): Hardware Fault in component: MassServo
2012-09-19T15:12:21.803Z,1348067541.803 [MassServo](DEBUG): Uninitialize Mass Servo.
2012-09-19T15:12:21.803Z,1348067541.803 [MassServo](INFO): Powering down
2012-09-19T15:12:21.807Z,1348067541.807 [CBIT](INFO): Clearing failed state for component MassServo
2012-09-19T15:12:21.807Z,1348067541.807 [MassServo] No Fault, FailCount= 0
2012-09-19T15:12:22.202Z,1348067542.202 [MassServo](DEBUG): Initializing EZServoServo.
2012-09-19T15:12:22.319Z,1348067542.319 [MassServo](DEBUG): Initialization error opening port: port not yet opened
2012-09-19T15:12:22.320Z,1348067542.320 [MassServo](DEBUG): Initializing MassServo.
2012-09-19T15:12:25.609Z,1348067545.609 [PAR_Licor](ERROR): PAR reading out of range: -0.027021 uMol/s/m2
2012-09-19T15:12:26.495Z,1348067546.494 [MassServo](FAULT): Overload Error
2012-09-19T15:12:26.495Z,1348067546.495 [MassServo] Hardware Fault, FailCount= 1
2012-09-19T15:12:26.495Z,1348067546.495 [MassServo](ERROR): Hardware Fault
2012-09-19T15:12:26.518Z,1348067546.518 [CBIT](ERROR): Hardware Fault in component: MassServo
2012-09-19T15:12:26.899Z,1348067546.899 [MassServo](DEBUG): Uninitialize Mass Servo.
2012-09-19T15:12:26.899Z,1348067546.899 [MassServo](INFO): Powering down
2012-09-19T15:12:26.903Z,1348067546.903 [CBIT](INFO): Clearing failed state for component MassServo
2012-09-19T15:12:26.903Z,1348067546.903 [MassServo] No Fault, FailCount= 0
2012-09-19T15:12:27.331Z,1348067547.331 [MassServo](DEBUG): Initializing EZServoServo.
2012-09-19T15:12:27.451Z,1348067547.451 [MassServo](DEBUG): Initialization error opening port: port not yet opened
2012-09-19T15:12:27.452Z,1348067547.452 [MassServo](DEBUG): Initializing MassServo.
2012-09-19T15:12:31.578Z,1348067551.579 [MassServo](FAULT): Overload Error
2012-09-19T15:12:31.579Z,1348067551.579 [MassServo] Hardware Fault, FailCount= 1
2012-09-19T15:12:31.579Z,1348067551.579 [MassServo](ERROR): Hardware Fault
2012-09-19T15:12:31.602Z,1348067551.602 [CBIT](ERROR): Hardware Fault in component: MassServo
2012-09-19T15:12:31.963Z,1348067551.963 [MassServo](DEBUG): Uninitialize Mass Servo.
2012-09-19T15:12:31.963Z,1348067551.963 [MassServo](INFO): Powering down
2012-09-19T15:12:31.966Z,1348067551.967 [CBIT](INFO): Clearing failed state for component MassServo
2012-09-19T15:12:31.967Z,1348067551.967 [MassServo] No Fault, FailCount= 0
2012-09-19T15:12:32.831Z,1348067552.831 [MassServo](DEBUG): Initializing EZServoServo.
2012-09-19T15:12:32.951Z,1348067552.951 [MassServo](DEBUG): Initialization error opening port: port not yet opened
2012-09-19T15:12:32.952Z,1348067552.952 [MassServo](DEBUG): Initializing MassServo.
2012-09-19T15:12:33.822Z,1348067553.822 [PAR_Licor](ERROR): PAR reading out of range: -0.012716 uMol/s/m2
2012-09-19T15:12:36.729Z,1348067556.729 [PAR_Licor](ERROR): PAR reading out of range: 0.000000 uMol/s/m2
2012-09-19T15:12:36.835Z,1348067556.835 [MassServo](FAULT): Overload Error
2012-09-19T15:12:36.835Z,1348067556.835 [MassServo] Hardware Fault, FailCount= 1
2012-09-19T15:12:36.835Z,1348067556.835 [MassServo](ERROR): Hardware Fault
2012-09-19T15:12:36.858Z,1348067556.858 [CBIT](ERROR): Hardware Fault in component: MassServo
2012-09-19T15:12:37.007Z,1348067557.007 [MassServo](DEBUG): Uninitialize Mass Servo.
2012-09-19T15:12:37.007Z,1348067557.007 [MassServo](INFO): Powering down
2012-09-19T15:12:37.011Z,1348067557.011 [CBIT](INFO): Clearing failed state for component MassServo
2012-09-19T15:12:37.011Z,1348067557.011 [MassServo] No Fault, FailCount= 0
2012-09-19T15:12:37.424Z,1348067557.424 [MassServo](DEBUG): Initializing EZServoServo.
2012-09-19T15:12:37.551Z,1348067557.551 [MassServo](DEBUG): Initialization error opening port: port not yet opened
2012-09-19T15:12:37.551Z,1348067557.551 [MassServo](DEBUG): Initializing MassServo.
2012-09-19T15:12:38.162Z,1348067558.162 [PAR_Licor](ERROR): PAR reading out of range: -0.003179 uMol/s/m2
2012-09-19T15:12:41.182Z,1348067561.182 [MassServo](FAULT): Overload Error
2012-09-19T15:12:41.182Z,1348067561.182 [MassServo] Hardware Fault, FailCount= 1
2012-09-19T15:12:41.183Z,1348067561.182 [MassServo](ERROR): Hardware Fault
2012-09-19T15:12:41.186Z,1348067561.186 [CBIT](ERROR): Hardware Fault in component: MassServo
2012-09-19T15:12:41.327Z,1348067561.327 [MassServo](DEBUG): Uninitialize Mass Servo.
2012-09-19T15:12:41.327Z,1348067561.327 [MassServo](INFO): Powering down
2012-09-19T15:12:41.330Z,1348067561.330 [CBIT](INFO): Clearing failed state for component MassServo
2012-09-19T15:12:41.331Z,1348067561.330 [MassServo] No Fault, FailCount= 0
2012-09-19T15:12:41.727Z,1348067561.727 [MassServo](DEBUG): Initializing EZServoServo.
2012-09-19T15:12:41.847Z,1348067561.847 [MassServo](DEBUG): Initialization error opening port: port not yet opened
2012-09-19T15:12:41.848Z,1348067561.848 [MassServo](DEBUG): Initializing MassServo.
2012-09-19T15:12:45.882Z,1348067565.882 [MassServo](FAULT): Overload Error
2012-09-19T15:12:45.883Z,1348067565.883 [MassServo] Hardware Fault, FailCount= 1
2012-09-19T15:12:45.883Z,1348067565.883 [MassServo](ERROR): Hardware Fault
2012-09-19T15:12:45.906Z,1348067565.906 [CBIT](ERROR): Hardware Fault in component: MassServo
2012-09-19T15:12:46.043Z,1348067566.043 [MassServo](DEBUG): Uninitialize Mass Servo.
2012-09-19T15:12:46.043Z,1348067566.043 [MassServo](INFO): Powering down
2012-09-19T15:12:46.047Z,1348067566.047 [CBIT](INFO): Clearing failed state for component MassServo
2012-09-19T15:12:46.047Z,1348067566.047 [MassServo] No Fault, FailCount= 0
2012-09-19T15:12:46.443Z,1348067566.443 [MassServo](DEBUG): Initializing EZServoServo.
2012-09-19T15:12:46.575Z,1348067566.575 [MassServo](DEBUG): Initialization error opening port: port not yet opened
2012-09-19T15:12:46.575Z,1348067566.575 [MassServo](DEBUG): Initializing MassServo.
2012-09-19T15:12:46.785Z,1348067566.785 [PAR_Licor](ERROR): PAR reading out of range: 0.000000 uMol/s/m2
2012-09-19T15:12:50.201Z,1348067570.201 [MassServo](FAULT): Overload Error
2012-09-19T15:12:50.201Z,1348067570.201 [MassServo] Hardware Fault, FailCount= 1
2012-09-19T15:12:50.201Z,1348067570.201 [MassServo](ERROR): Hardware Fault
2012-09-19T15:12:50.205Z,1348067570.204 [CBIT](ERROR): Hardware Fault in component: MassServo
2012-09-19T15:12:50.344Z,1348067570.344 [MassServo](DEBUG): Uninitialize Mass Servo.
2012-09-19T15:12:50.344Z,1348067570.344 [MassServo](INFO): Powering down
2012-09-19T15:12:50.348Z,1348067570.348 [CBIT](INFO): Clearing failed state for component MassServo
2012-09-19T15:12:50.348Z,1348067570.348 [MassServo] No Fault, FailCount= 0
2012-09-19T15:12:50.748Z,1348067570.748 [MassServo](DEBUG): Initializing EZServoServo.
2012-09-19T15:12:50.870Z,1348067570.870 [MassServo](DEBUG): Initialization error opening port: port not yet opened
2012-09-19T15:12:50.870Z,1348067570.870 [MassServo](DEBUG): Initializing MassServo.
2012-09-19T15:12:54.869Z,1348067574.869 [MassServo](FAULT): Overload Error
2012-09-19T15:12:54.869Z,1348067574.869 [MassServo] Hardware Fault, FailCount= 1
2012-09-19T15:12:54.869Z,1348067574.869 [MassServo](ERROR): Hardware Fault
2012-09-19T15:12:54.893Z,1348067574.893 [CBIT](ERROR): Hardware Fault in component: MassServo
2012-09-19T15:12:55.039Z,1348067575.039 [MassServo](DEBUG): Uninitialize Mass Servo.
2012-09-19T15:12:55.039Z,1348067575.039 [MassServo](INFO): Powering down
2012-09-19T15:12:55.042Z,1348067575.042 [CBIT](INFO): Clearing failed state for component MassServo
2012-09-19T15:12:55.042Z,1348067575.042 [MassServo] No Fault, FailCount= 0
2012-09-19T15:12:55.455Z,1348067575.455 [MassServo](DEBUG): Initializing EZServoServo.
2012-09-19T15:12:55.576Z,1348067575.576 [MassServo](DEBUG): Initialization error opening port: port not yet opened
2012-09-19T15:12:55.576Z,1348067575.576 [MassServo](DEBUG): Initializing MassServo.
2012-09-19T15:12:59.382Z,1348067579.382 [MassServo](FAULT): Overload Error
2012-09-19T15:12:59.383Z,1348067579.383 [MassServo] Hardware Fault, FailCount= 1
2012-09-19T15:12:59.383Z,1348067579.383 [MassServo](ERROR): Hardware Fault
2012-09-19T15:12:59.406Z,1348067579.406 [CBIT](ERROR): Hardware Fault in component: MassServo
2012-09-19T15:12:59.751Z,1348067579.751 [MassServo](DEBUG): Uninitialize Mass Servo.
2012-09-19T15:12:59.751Z,1348067579.751 [MassServo](INFO): Powering down
2012-09-19T15:12:59.754Z,1348067579.754 [CBIT](INFO): Clearing failed state for component MassServo
2012-09-19T15:12:59.755Z,1348067579.755 [MassServo] No Fault, FailCount= 0
2012-09-19T15:13:00.155Z,1348067580.155 [MassServo](DEBUG): Initializing EZServoServo.
2012-09-19T15:13:00.275Z,1348067580.276 [MassServo](DEBUG): Initialization error opening port: port not yet opened
2012-09-19T15:13:00.276Z,1348067580.276 [MassServo](DEBUG): Initializing MassServo.
2012-09-19T15:13:02.125Z,1348067582.125 [PAR_Licor](ERROR): PAR reading out of range: -0.011126 uMol/s/m2
2012-09-19T15:13:04.059Z,1348067584.059 [MassServo](FAULT): Overload Error
2012-09-19T15:13:04.059Z,1348067584.059 [MassServo] Hardware Fault, FailCount= 1
2012-09-19T15:13:04.059Z,1348067584.059 [MassServo](ERROR): Hardware Fault
2012-09-19T15:13:04.083Z,1348067584.083 [CBIT](ERROR): Hardware Fault in component: MassServo
2012-09-19T15:13:04.435Z,1348067584.435 [MassServo](DEBUG): Uninitialize Mass Servo.
2012-09-19T15:13:04.435Z,1348067584.435 [MassServo](INFO): Powering down
2012-09-19T15:13:04.439Z,1348067584.439 [CBIT](INFO): Clearing failed state for component MassServo
2012-09-19T15:13:04.439Z,1348067584.439 [MassServo] No Fault, FailCount= 0
2012-09-19T15:13:04.875Z,1348067584.875 [MassServo](DEBUG): Initializing EZServoServo.
2012-09-19T15:13:04.995Z,1348067584.995 [MassServo](DEBUG): Initialization error opening port: port not yet opened
2012-09-19T15:13:04.996Z,1348067584.996 [MassServo](DEBUG): Initializing MassServo.
2012-09-19T15:13:09.131Z,1348067589.131 [MassServo](FAULT): Overload Error
2012-09-19T15:13:09.131Z,1348067589.131 [MassServo] Hardware Fault, FailCount= 1
2012-09-19T15:13:09.131Z,1348067589.131 [MassServo](ERROR): Hardware Fault
2012-09-19T15:13:09.154Z,1348067589.154 [CBIT](ERROR): Hardware Fault in component: MassServo
2012-09-19T15:13:09.511Z,1348067589.511 [MassServo](DEBUG): Uninitialize Mass Servo.
2012-09-19T15:13:09.511Z,1348067589.511 [MassServo](INFO): Powering down
2012-09-19T15:13:09.515Z,1348067589.515 [CBIT](INFO): Clearing failed state for component MassServo
2012-09-19T15:13:09.515Z,1348067589.515 [MassServo] No Fault, FailCount= 0
2012-09-19T15:13:09.911Z,1348067589.911 [MassServo](DEBUG): Initializing EZServoServo.
2012-09-19T15:13:10.043Z,1348067590.043 [MassServo](DEBUG): Initialization error opening port: port not yet opened
2012-09-19T15:13:10.043Z,1348067590.043 [MassServo](DEBUG): Initializing MassServo.
2012-09-19T15:13:13.766Z,1348067593.766 [MassServo](FAULT): Overload Error
2012-09-19T15:13:13.767Z,1348067593.767 [MassServo] Hardware Fault, FailCount= 1
2012-09-19T15:13:13.767Z,1348067593.767 [MassServo](ERROR): Hardware Fault
2012-09-19T15:13:13.790Z,1348067593.790 [CBIT](ERROR): Hardware Fault in component: MassServo
2012-09-19T15:13:14.207Z,1348067594.207 [MassServo](DEBUG): Uninitialize Mass Servo.
2012-09-19T15:13:14.207Z,1348067594.207 [MassServo](INFO): Powering down
2012-09-19T15:13:14.211Z,1348067594.211 [CBIT](INFO): Clearing failed state for component MassServo
2012-09-19T15:13:14.211Z,1348067594.211 [MassServo] No Fault, FailCount= 0
2012-09-19T15:13:14.579Z,1348067594.579 [MassServo](DEBUG): Initializing EZServoServo.
2012-09-19T15:13:14.699Z,1348067594.699 [MassServo](DEBUG): Initialization error opening port: port not yet opened
2012-09-19T15:13:14.699Z,1348067594.699 [MassServo](DEBUG): Initializing MassServo.
2012-09-19T15:13:15.285Z,1348067595.285 [PAR_Licor](ERROR): PAR reading out of range: -0.038148 uMol/s/m2
2012-09-19T15:13:17.186Z,1348067597.186 [PAR_Licor](ERROR): PAR reading out of range: -0.001589 uMol/s/m2
2012-09-19T15:13:18.386Z,1348067598.386 [PAR_Licor](ERROR): PAR reading out of range: -0.039737 uMol/s/m2
2012-09-19T15:13:18.467Z,1348067598.467 [MassServo](FAULT): Overload Error
2012-09-19T15:13:18.467Z,1348067598.467 [MassServo] Hardware Fault, FailCount= 1
2012-09-19T15:13:18.467Z,1348067598.467 [MassServo](ERROR): Hardware Fault
2012-09-19T15:13:18.490Z,1348067598.490 [CBIT](ERROR): Hardware Fault in component: MassServo
2012-09-19T15:13:18.863Z,1348067598.863 [MassServo](DEBUG): Uninitialize Mass Servo.
2012-09-19T15:13:18.863Z,1348067598.863 [MassServo](INFO): Powering down
2012-09-19T15:13:18.869Z,1348067598.869 [CBIT](INFO): Clearing failed state for component MassServo
2012-09-19T15:13:18.869Z,1348067598.869 [MassServo] No Fault, FailCount= 0
2012-09-19T15:13:19.265Z,1348067599.265 [MassServo](DEBUG): Initializing EZServoServo.
2012-09-19T15:13:19.384Z,1348067599.384 [MassServo](DEBUG): Initialization error opening port: port not yet opened
2012-09-19T15:13:19.384Z,1348067599.384 [MassServo](DEBUG): Initializing MassServo.
2012-09-19T15:13:20.522Z,1348067600.522 [PAR_Licor](ERROR): PAR reading out of range: -0.046095 uMol/s/m2
2012-09-19T15:13:22.741Z,1348067602.741 [PAR_Licor](ERROR): PAR reading out of range: -0.006358 uMol/s/m2
2012-09-19T15:13:23.938Z,1348067603.938 [PAR_Licor](ERROR): PAR reading out of range: -0.017484 uMol/s/m2
2012-09-19T15:13:24.018Z,1348067604.018 [MassServo](FAULT): Overload Error
2012-09-19T15:13:24.019Z,1348067604.019 [MassServo] Hardware Fault, FailCount= 1
2012-09-19T15:13:24.019Z,1348067604.019 [MassServo](ERROR): Hardware Fault
2012-09-19T15:13:24.042Z,1348067604.042 [CBIT](ERROR): Hardware Fault in component: MassServo
2012-09-19T15:13:24.967Z,1348067604.967 [MassServo](DEBUG): Uninitialize Mass Servo.
2012-09-19T15:13:24.967Z,1348067604.967 [MassServo](INFO): Powering down
2012-09-19T15:13:24.970Z,1348067604.970 [CBIT](INFO): Clearing failed state for component MassServo
2012-09-19T15:13:24.970Z,1348067604.970 [MassServo] No Fault, FailCount= 0
2012-09-19T15:13:25.107Z,1348067605.107 [MassServo](DEBUG): Initializing EZServoServo.
2012-09-19T15:13:25.227Z,1348067605.227 [MassServo](DEBUG): Initialization error opening port: port not yet opened
2012-09-19T15:13:25.228Z,1348067605.228 [MassServo](DEBUG): Initializing MassServo.
2012-09-19T15:13:27.843Z,1348067607.843 [PAR_Licor](ERROR): PAR reading out of range: -0.017484 uMol/s/m2
2012-09-19T15:13:29.111Z,1348067609.111 [MassServo](FAULT): Overload Error
2012-09-19T15:13:29.111Z,1348067609.111 [MassServo] Hardware Fault, FailCount= 1
2012-09-19T15:13:29.111Z,1348067609.111 [MassServo](ERROR): Hardware Fault
2012-09-19T15:13:29.133Z,1348067609.134 [CBIT](ERROR): Hardware Fault in component: MassServo
2012-09-19T15:13:29.373Z,1348067609.373 [PAR_Licor](ERROR): PAR reading out of range: -0.034969 uMol/s/m2
2012-09-19T15:13:29.451Z,1348067609.451 [MassServo](DEBUG): Uninitialize Mass Servo.
2012-09-19T15:13:29.451Z,1348067609.451 [MassServo](INFO): Powering down
2012-09-19T15:13:29.455Z,1348067609.455 [CBIT](INFO): Clearing failed state for component MassServo
2012-09-19T15:13:29.455Z,1348067609.455 [MassServo] No Fault, FailCount= 0
2012-09-19T15:13:29.827Z,1348067609.827 [MassServo](DEBUG): Initializing EZServoServo.
2012-09-19T15:13:29.947Z,1348067609.947 [MassServo](DEBUG): Initialization error opening port: port not yet opened
2012-09-19T15:13:29.948Z,1348067609.948 [MassServo](DEBUG): Initializing MassServo.
2012-09-19T15:13:30.195Z,1348067610.195 [PAR_Licor](ERROR): PAR reading out of range: -0.012716 uMol/s/m2
2012-09-19T15:13:33.690Z,1348067613.690 [MassServo](FAULT): Overload Error
2012-09-19T15:13:33.691Z,1348067613.691 [MassServo] Hardware Fault, FailCount= 1
2012-09-19T15:13:33.691Z,1348067613.691 [MassServo](ERROR): Hardware Fault
2012-09-19T15:13:33.714Z,1348067613.714 [CBIT](ERROR): Hardware Fault in component: MassServo
2012-09-19T15:13:34.067Z,1348067614.067 [MassServo](DEBUG): Uninitialize Mass Servo.
2012-09-19T15:13:34.067Z,1348067614.067 [MassServo](INFO): Powering down
2012-09-19T15:13:34.070Z,1348067614.070 [CBIT](INFO): Clearing failed state for component MassServo
2012-09-19T15:13:34.071Z,1348067614.070 [MassServo] No Fault, FailCount= 0
2012-09-19T15:13:34.460Z,1348067614.460 [MassServo](DEBUG): Initializing EZServoServo.
2012-09-19T15:13:34.579Z,1348067614.579 [MassServo](DEBUG): Initialization error opening port: port not yet opened
2012-09-19T15:13:34.580Z,1348067614.579 [MassServo](DEBUG): Initializing MassServo.
2012-09-19T15:13:38.334Z,1348067618.334 [MassServo](FAULT): Overload Error
2012-09-19T15:13:38.335Z,1348067618.335 [MassServo] Hardware Fault, FailCount= 1
2012-09-19T15:13:38.335Z,1348067618.335 [MassServo](ERROR): Hardware Fault
2012-09-19T15:13:38.358Z,1348067618.358 [CBIT](ERROR): Hardware Fault in component: MassServo
2012-09-19T15:13:38.715Z,1348067618.715 [MassServo](DEBUG): Uninitialize Mass Servo.
2012-09-19T15:13:38.715Z,1348067618.715 [MassServo](INFO): Powering down
2012-09-19T15:13:38.719Z,1348067618.719 [CBIT](INFO): Clearing failed state for component MassServo
2012-09-19T15:13:38.719Z,1348067618.719 [MassServo] No Fault, FailCount= 0
2012-09-19T15:13:39.119Z,1348067619.119 [MassServo](DEBUG): Initializing EZServoServo.
2012-09-19T15:13:39.239Z,1348067619.239 [MassServo](DEBUG): Initialization error opening port: port not yet opened
2012-09-19T15:13:39.240Z,1348067619.240 [MassServo](DEBUG): Initializing MassServo.
2012-09-19T15:13:43.051Z,1348067623.050 [MassServo](FAULT): Overload Error
2012-09-19T15:13:43.051Z,1348067623.051 [MassServo] Hardware Fault, FailCount= 1
2012-09-19T15:13:43.051Z,1348067623.051 [MassServo](ERROR): Hardware Fault
2012-09-19T15:13:43.074Z,1348067623.074 [CBIT](ERROR): Hardware Fault in component: MassServo
2012-09-19T15:13:43.353Z,1348067623.353 [PAR_Licor](ERROR): PAR reading out of range: -0.004768 uMol/s/m2
2012-09-19T15:13:43.415Z,1348067623.415 [MassServo](DEBUG): Uninitialize Mass Servo.
2012-09-19T15:13:43.415Z,1348067623.415 [MassServo](INFO): Powering down
2012-09-19T15:13:43.419Z,1348067623.418 [CBIT](INFO): Clearing failed state for component MassServo
2012-09-19T15:13:43.419Z,1348067623.419 [MassServo] No Fault, FailCount= 0
2012-09-19T15:13:43.799Z,1348067623.799 [MassServo](DEBUG): Initializing EZServoServo.
2012-09-19T15:13:43.919Z,1348067623.919 [MassServo](DEBUG): Initialization error opening port: port not yet opened
2012-09-19T15:13:43.920Z,1348067623.920 [MassServo](DEBUG): Initializing MassServo.
2012-09-19T15:13:48.123Z,1348067628.122 [MassServo](FAULT): Overload Error
2012-09-19T15:13:48.123Z,1348067628.123 [MassServo] Hardware Fault, FailCount= 1
2012-09-19T15:13:48.123Z,1348067628.123 [MassServo](ERROR): Hardware Fault
2012-09-19T15:13:48.146Z,1348067628.146 [CBIT](ERROR): Hardware Fault in component: MassServo
2012-09-19T15:13:48.491Z,1348067628.491 [MassServo](DEBUG): Uninitialize Mass Servo.
2012-09-19T15:13:48.491Z,1348067628.491 [MassServo](INFO): Powering down
2012-09-19T15:13:48.495Z,1348067628.495 [CBIT](INFO): Clearing failed state for component MassServo
2012-09-19T15:13:48.495Z,1348067628.495 [MassServo] No Fault, FailCount= 0
2012-09-19T15:13:48.900Z,1348067628.900 [MassServo](DEBUG): Initializing EZServoServo.
2012-09-19T15:13:49.031Z,1348067629.031 [MassServo](DEBUG): Initialization error opening port: port not yet opened
2012-09-19T15:13:49.031Z,1348067629.031 [MassServo](DEBUG): Initializing MassServo.
2012-09-19T15:13:52.767Z,1348067632.767 [MassServo](FAULT): Overload Error
2012-09-19T15:13:52.767Z,1348067632.767 [MassServo] Hardware Fault, FailCount= 1
2012-09-19T15:13:52.767Z,1348067632.767 [MassServo](ERROR): Hardware Fault
2012-09-19T15:13:52.790Z,1348067632.790 [CBIT](ERROR): Hardware Fault in component: MassServo
2012-09-19T15:13:53.059Z,1348067633.059 [PAR_Licor](ERROR): PAR reading out of range: -0.001589 uMol/s/m2
2012-09-19T15:13:53.123Z,1348067633.123 [MassServo](DEBUG): Uninitialize Mass Servo.
2012-09-19T15:13:53.123Z,1348067633.123 [MassServo](INFO): Powering down
2012-09-19T15:13:53.127Z,1348067633.127 [CBIT](INFO): Clearing failed state for component MassServo
2012-09-19T15:13:53.127Z,1348067633.127 [MassServo] No Fault, FailCount= 0
2012-09-19T15:13:53.531Z,1348067633.532 [MassServo](DEBUG): Initializing EZServoServo.
2012-09-19T15:13:53.651Z,1348067633.651 [MassServo](DEBUG): Initialization error opening port: port not yet opened
2012-09-19T15:13:53.652Z,1348067633.652 [MassServo](DEBUG): Initializing MassServo.
2012-09-19T15:13:56.123Z,1348067636.122 [PAR_Licor](ERROR): PAR reading out of range: -0.020663 uMol/s/m2
2012-09-19T15:13:58.201Z,1348067638.201 [MassServo](FAULT): Overload Error
2012-09-19T15:13:58.201Z,1348067638.201 [MassServo] Hardware Fault, FailCount= 1
2012-09-19T15:13:58.201Z,1348067638.201 [MassServo](ERROR): Hardware Fault
2012-09-19T15:13:58.226Z,1348067638.226 [CBIT](ERROR): Hardware Fault in component: MassServo
2012-09-19T15:13:59.083Z,1348067639.083 [MassServo](DEBUG): Uninitialize Mass Servo.
2012-09-19T15:13:59.083Z,1348067639.083 [MassServo](INFO): Powering down
2012-09-19T15:13:59.087Z,1348067639.087 [CBIT](INFO): Clearing failed state for component MassServo
2012-09-19T15:13:59.087Z,1348067639.087 [MassServo] No Fault, FailCount= 0
2012-09-19T15:13:59.311Z,1348067639.311 [MassServo](DEBUG): Initializing EZServoServo.
2012-09-19T15:13:59.431Z,1348067639.431 [MassServo](DEBUG): Initialization error opening port: port not yet opened
2012-09-19T15:13:59.432Z,1348067639.432 [MassServo](DEBUG): Initializing MassServo.
2012-09-19T15:13:59.986Z,1348067639.986 [PAR_Licor](ERROR): PAR reading out of range: -0.009537 uMol/s/m2
2012-09-19T15:14:01.186Z,1348067641.186 [PAR_Licor](ERROR): PAR reading out of range: -0.044506 uMol/s/m2
2012-09-19T15:14:03.770Z,1348067643.770 [MassServo](FAULT): Overload Error
2012-09-19T15:14:03.771Z,1348067643.771 [MassServo] Hardware Fault, FailCount= 1
2012-09-19T15:14:03.771Z,1348067643.771 [MassServo](ERROR): Hardware Fault
2012-09-19T15:14:03.794Z,1348067643.794 [CBIT](ERROR): Hardware Fault in component: MassServo
2012-09-19T15:14:03.947Z,1348067643.947 [MassServo](DEBUG): Uninitialize Mass Servo.
2012-09-19T15:14:03.947Z,1348067643.947 [MassServo](INFO): Powering down
2012-09-19T15:14:03.951Z,1348067643.951 [CBIT](INFO): Clearing failed state for component MassServo
2012-09-19T15:14:03.951Z,1348067643.951 [MassServo] No Fault, FailCount= 0
2012-09-19T15:14:04.363Z,1348067644.363 [MassServo](DEBUG): Initializing EZServoServo.
2012-09-19T15:14:04.484Z,1348067644.484 [MassServo](DEBUG): Initialization error opening port: port not yet opened
2012-09-19T15:14:04.484Z,1348067644.484 [MassServo](DEBUG): Initializing MassServo.
2012-09-19T15:14:05.529Z,1348067645.529 [PAR_Licor](ERROR): PAR reading out of range: -0.009537 uMol/s/m2
2012-09-19T15:14:06.671Z,1348067646.671 [PAR_Licor](ERROR): PAR reading out of range: -0.007947 uMol/s/m2
2012-09-19T15:14:08.227Z,1348067648.227 [MassServo](FAULT): Overload Error
2012-09-19T15:14:08.227Z,1348067648.227 [MassServo] Hardware Fault, FailCount= 1
2012-09-19T15:14:08.227Z,1348067648.227 [MassServo](ERROR): Hardware Fault
2012-09-19T15:14:08.250Z,1348067648.250 [CBIT](ERROR): Hardware Fault in component: MassServo
2012-09-19T15:14:08.643Z,1348067648.644 [MassServo](DEBUG): Uninitialize Mass Servo.
2012-09-19T15:14:08.644Z,1348067648.644 [MassServo](INFO): Powering down
2012-09-19T15:14:08.647Z,1348067648.647 [CBIT](INFO): Clearing failed state for component MassServo
2012-09-19T15:14:08.647Z,1348067648.647 [MassServo] No Fault, FailCount= 0
2012-09-19T15:14:09.007Z,1348067649.007 [MassServo](DEBUG): Initializing EZServoServo.
2012-09-19T15:14:09.139Z,1348067649.139 [MassServo](DEBUG): Initialization error opening port: port not yet opened
2012-09-19T15:14:09.139Z,1348067649.139 [MassServo](DEBUG): Initializing MassServo.
2012-09-19T15:14:10.547Z,1348067650.547 [PAR_Licor](ERROR): PAR reading out of range: -0.014305 uMol/s/m2
2012-09-19T15:14:12.919Z,1348067652.918 [MassServo](FAULT): Overload Error
2012-09-19T15:14:12.919Z,1348067652.919 [MassServo] Hardware Fault, FailCount= 1
2012-09-19T15:14:12.919Z,1348067652.919 [MassServo](ERROR): Hardware Fault
2012-09-19T15:14:12.942Z,1348067652.942 [CBIT](ERROR): Hardware Fault in component: MassServo
2012-09-19T15:14:13.287Z,1348067653.287 [MassServo](DEBUG): Uninitialize Mass Servo.
2012-09-19T15:14:13.287Z,1348067653.287 [MassServo](INFO): Powering down
2012-09-19T15:14:13.290Z,1348067653.290 [CBIT](INFO): Clearing failed state for component MassServo
2012-09-19T15:14:13.291Z,1348067653.291 [MassServo] No Fault, FailCount= 0
2012-09-19T15:14:13.683Z,1348067653.683 [MassServo](DEBUG): Initializing EZServoServo.
2012-09-19T15:14:13.803Z,1348067653.803 [MassServo](DEBUG): Initialization error opening port: port not yet opened
2012-09-19T15:14:13.803Z,1348067653.803 [MassServo](DEBUG): Initializing MassServo.
2012-09-19T15:14:14.418Z,1348067654.418 [PAR_Licor](ERROR): PAR reading out of range: -0.012716 uMol/s/m2
2012-09-19T15:14:17.643Z,1348067657.643 [MassServo](FAULT): Overload Error
2012-09-19T15:14:17.643Z,1348067657.643 [MassServo] Hardware Fault, FailCount= 1
2012-09-19T15:14:17.643Z,1348067657.643 [MassServo](ERROR): Hardware Fault
2012-09-19T15:14:17.666Z,1348067657.666 [CBIT](ERROR): Hardware Fault in component: MassServo
2012-09-19T15:14:17.923Z,1348067657.923 [PAR_Licor](ERROR): PAR reading out of range: -0.006358 uMol/s/m2
2012-09-19T15:14:17.983Z,1348067657.983 [MassServo](DEBUG): Uninitialize Mass Servo.
2012-09-19T15:14:17.983Z,1348067657.983 [MassServo](INFO): Powering down
2012-09-19T15:14:17.988Z,1348067657.988 [CBIT](INFO): Clearing failed state for component MassServo
2012-09-19T15:14:17.988Z,1348067657.988 [MassServo] No Fault, FailCount= 0
2012-09-19T15:14:18.451Z,1348067658.451 [MassServo](DEBUG): Initializing EZServoServo.
2012-09-19T15:14:18.572Z,1348067658.572 [MassServo](DEBUG): Initialization error opening port: port not yet opened
2012-09-19T15:14:18.572Z,1348067658.572 [MassServo](DEBUG): Initializing MassServo.
2012-09-19T15:14:19.533Z,1348067659.533 [PAR_Licor](ERROR): PAR reading out of range: -0.015895 uMol/s/m2
2012-09-19T15:14:22.282Z,1348067662.283 [MassServo](FAULT): Overload Error
2012-09-19T15:14:22.283Z,1348067662.283 [MassServo] Hardware Fault, FailCount= 1
2012-09-19T15:14:22.283Z,1348067662.283 [MassServo](ERROR): Hardware Fault
2012-09-19T15:14:22.310Z,1348067662.309 [CBIT](ERROR): Hardware Fault in component: MassServo
2012-09-19T15:14:22.591Z,1348067662.591 [NAL9602](FAULT): GPS failed to acquire within timeout.
2012-09-19T15:14:22.591Z,1348067662.591 [NAL9602] Data Fault, FailCount= 1
2012-09-19T15:14:22.591Z,1348067662.591 [NAL9602](ERROR): Data Fault
2012-09-19T15:14:22.659Z,1348067662.659 [MassServo](DEBUG): Uninitialize Mass Servo.
2012-09-19T15:14:22.659Z,1348067662.659 [MassServo](INFO): Powering down
2012-09-19T15:14:22.663Z,1348067662.663 [CBIT](INFO): Clearing failed state for component MassServo
2012-09-19T15:14:22.663Z,1348067662.663 [MassServo] No Fault, FailCount= 0
2012-09-19T15:14:22.664Z,1348067662.664 [CBIT](ERROR): Data Fault in component: NAL9602
2012-09-19T15:14:22.991Z,1348067662.991 [NAL9602](INFO): Powering down
2012-09-19T15:14:23.060Z,1348067663.059 [MassServo](DEBUG): Initializing EZServoServo.
2012-09-19T15:14:23.179Z,1348067663.180 [MassServo](DEBUG): Initialization error opening port: port not yet opened
2012-09-19T15:14:23.180Z,1348067663.180 [MassServo](DEBUG): Initializing MassServo.
2012-09-19T15:14:23.183Z,1348067663.183 [CBIT](INFO): Clearing failed state for component NAL9602
2012-09-19T15:14:23.183Z,1348067663.183 [NAL9602] No Fault, FailCount= 1
2012-09-19T15:14:27.123Z,1348067667.123 [MassServo](FAULT): Overload Error
2012-09-19T15:14:27.123Z,1348067667.123 [MassServo] Hardware Fault, FailCount= 1
2012-09-19T15:14:27.123Z,1348067667.123 [MassServo](ERROR): Hardware Fault
2012-09-19T15:14:27.146Z,1348067667.146 [CBIT](ERROR): Hardware Fault in component: MassServo
2012-09-19T15:14:27.531Z,1348067667.531 [MassServo](DEBUG): Uninitialize Mass Servo.
2012-09-19T15:14:27.531Z,1348067667.531 [MassServo](INFO): Powering down
2012-09-19T15:14:27.537Z,1348067667.537 [CBIT](INFO): Clearing failed state for component MassServo
2012-09-19T15:14:27.537Z,1348067667.537 [MassServo] No Fault, FailCount= 0
2012-09-19T15:14:27.951Z,1348067667.951 [MassServo](DEBUG): Initializing EZServoServo.
2012-09-19T15:14:28.072Z,1348067668.072 [MassServo](DEBUG): Initialization error opening port: port not yet opened
2012-09-19T15:14:28.072Z,1348067668.072 [MassServo](DEBUG): Initializing MassServo.
2012-09-19T15:14:28.215Z,1348067668.215 [NAL9602](INFO): Powering up NAL9602
2012-09-19T15:14:31.894Z,1348067671.894 [MassServo](FAULT): Overload Error
2012-09-19T15:14:31.895Z,1348067671.895 [MassServo] Hardware Fault, FailCount= 1
2012-09-19T15:14:31.895Z,1348067671.895 [MassServo](ERROR): Hardware Fault
2012-09-19T15:14:31.918Z,1348067671.918 [CBIT](ERROR): Hardware Fault in component: MassServo
2012-09-19T15:14:32.271Z,1348067672.271 [MassServo](DEBUG): Uninitialize Mass Servo.
2012-09-19T15:14:32.271Z,1348067672.271 [MassServo](INFO): Powering down
2012-09-19T15:14:32.275Z,1348067672.275 [CBIT](INFO): Clearing failed state for component MassServo
2012-09-19T15:14:32.275Z,1348067672.275 [MassServo] No Fault, FailCount= 0
2012-09-19T15:14:32.659Z,1348067672.659 [MassServo](DEBUG): Initializing EZServoServo.
2012-09-19T15:14:32.780Z,1348067672.780 [MassServo](DEBUG): Initialization error opening port: port not yet opened
2012-09-19T15:14:32.780Z,1348067672.780 [MassServo](DEBUG): Initializing MassServo.
2012-09-19T15:14:33.819Z,1348067673.819 [PAR_Licor](ERROR): PAR reading out of range: 0.000000 uMol/s/m2
2012-09-19T15:14:36.678Z,1348067676.678 [MassServo](FAULT): Overload Error
2012-09-19T15:14:36.679Z,1348067676.679 [MassServo] Hardware Fault, FailCount= 1
2012-09-19T15:14:36.679Z,1348067676.679 [MassServo](ERROR): Hardware Fault
2012-09-19T15:14:36.702Z,1348067676.702 [CBIT](ERROR): Hardware Fault in component: MassServo
2012-09-19T15:14:37.060Z,1348067677.059 [MassServo](DEBUG): Uninitialize Mass Servo.
2012-09-19T15:14:37.060Z,1348067677.060 [MassServo](INFO): Powering down
2012-09-19T15:14:37.063Z,1348067677.063 [CBIT](INFO): Clearing failed state for component MassServo
2012-09-19T15:14:37.063Z,1348067677.063 [MassServo] No Fault, FailCount= 0
2012-09-19T15:14:37.524Z,1348067677.524 [MassServo](DEBUG): Initializing EZServoServo.
2012-09-19T15:14:37.643Z,1348067677.644 [MassServo](DEBUG): Initialization error opening port: port not yet opened
2012-09-19T15:14:37.644Z,1348067677.644 [MassServo](DEBUG): Initializing MassServo.
2012-09-19T15:14:39.023Z,1348067679.023 [NAL9602](INFO): NAL9602 initialized
2012-09-19T15:14:41.478Z,1348067681.478 [MassServo](FAULT): Overload Error
2012-09-19T15:14:41.479Z,1348067681.479 [MassServo] Hardware Fault, FailCount= 1
2012-09-19T15:14:41.479Z,1348067681.479 [MassServo](ERROR): Hardware Fault
2012-09-19T15:14:41.502Z,1348067681.502 [CBIT](ERROR): Hardware Fault in component: MassServo
2012-09-19T15:14:41.923Z,1348067681.923 [MassServo](DEBUG): Uninitialize Mass Servo.
2012-09-19T15:14:41.923Z,1348067681.923 [MassServo](INFO): Powering down
2012-09-19T15:14:41.927Z,1348067681.927 [CBIT](INFO): Clearing failed state for component MassServo
2012-09-19T15:14:41.927Z,1348067681.927 [MassServo] No Fault, FailCount= 0
2012-09-19T15:14:42.267Z,1348067682.267 [MassServo](DEBUG): Initializing EZServoServo.
2012-09-19T15:14:42.387Z,1348067682.387 [MassServo](DEBUG): Initialization error opening port: port not yet opened
2012-09-19T15:14:42.388Z,1348067682.388 [MassServo](DEBUG): Initializing MassServo.
2012-09-19T15:14:46.550Z,1348067686.550 [MassServo](FAULT): Overload Error
2012-09-19T15:14:46.551Z,1348067686.551 [MassServo] Hardware Fault, FailCount= 1
2012-09-19T15:14:46.551Z,1348067686.551 [MassServo](ERROR): Hardware Fault
2012-09-19T15:14:46.574Z,1348067686.574 [CBIT](ERROR): Hardware Fault in component: MassServo
2012-09-19T15:14:47.431Z,1348067687.431 [MassServo](DEBUG): Uninitialize Mass Servo.
2012-09-19T15:14:47.431Z,1348067687.431 [MassServo](INFO): Powering down
2012-09-19T15:14:47.435Z,1348067687.435 [CBIT](INFO): Clearing failed state for component MassServo
2012-09-19T15:14:47.435Z,1348067687.435 [MassServo] No Fault, FailCount= 0
2012-09-19T15:14:47.575Z,1348067687.575 [MassServo](DEBUG): Initializing EZServoServo.
2012-09-19T15:14:47.695Z,1348067687.695 [MassServo](DEBUG): Initialization error opening port: port not yet opened
2012-09-19T15:14:47.696Z,1348067687.695 [MassServo](DEBUG): Initializing MassServo.
2012-09-19T15:14:49.578Z,1348067689.578 [PAR_Licor](ERROR): PAR reading out of range: -0.061990 uMol/s/m2
2012-09-19T15:14:51.322Z,1348067691.322 [MassServo](FAULT): Overload Error
2012-09-19T15:14:51.323Z,1348067691.323 [MassServo] Hardware Fault, FailCount= 1
2012-09-19T15:14:51.323Z,1348067691.323 [MassServo](ERROR): Hardware Fault
2012-09-19T15:14:51.346Z,1348067691.346 [CBIT](ERROR): Hardware Fault in component: MassServo
2012-09-19T15:14:51.567Z,1348067691.567 [MassServo](DEBUG): Uninitialize Mass Servo.
2012-09-19T15:14:51.567Z,1348067691.567 [MassServo](INFO): Powering down
2012-09-19T15:14:51.571Z,1348067691.571 [CBIT](INFO): Clearing failed state for component MassServo
2012-09-19T15:14:51.571Z,1348067691.571 [MassServo] No Fault, FailCount= 0
2012-09-19T15:14:51.963Z,1348067691.963 [MassServo](DEBUG): Initializing EZServoServo.
2012-09-19T15:14:52.083Z,1348067692.083 [MassServo](DEBUG): Initialization error opening port: port not yet opened
2012-09-19T15:14:52.084Z,1348067692.084 [MassServo](DEBUG): Initializing MassServo.
2012-09-19T15:14:55.658Z,1348067695.658 [MassServo](FAULT): Overload Error
2012-09-19T15:14:55.658Z,1348067695.658 [MassServo] Hardware Fault, FailCount= 1
2012-09-19T15:14:55.659Z,1348067695.658 [MassServo](ERROR): Hardware Fault
2012-09-19T15:14:55.682Z,1348067695.682 [CBIT](ERROR): Hardware Fault in component: MassServo
2012-09-19T15:14:55.823Z,1348067695.823 [MassServo](DEBUG): Uninitialize Mass Servo.
2012-09-19T15:14:55.823Z,1348067695.823 [MassServo](INFO): Powering down
2012-09-19T15:14:55.827Z,1348067695.827 [CBIT](INFO): Clearing failed state for component MassServo
2012-09-19T15:14:55.827Z,1348067695.827 [MassServo] No Fault, FailCount= 0
2012-09-19T15:14:56.319Z,1348067696.319 [MassServo](DEBUG): Initializing EZServoServo.
2012-09-19T15:14:56.444Z,1348067696.444 [MassServo](DEBUG): Initialization error opening port: port not yet opened
2012-09-19T15:14:56.444Z,1348067696.444 [MassServo](DEBUG): Initializing MassServo.
2012-09-19T15:15:00.543Z,1348067700.543 [MassServo](FAULT): Overload Error
2012-09-19T15:15:00.543Z,1348067700.543 [MassServo] Hardware Fault, FailCount= 1
2012-09-19T15:15:00.543Z,1348067700.543 [MassServo](ERROR): Hardware Fault
2012-09-19T15:15:00.566Z,1348067700.566 [CBIT](ERROR): Hardware Fault in component: MassServo
2012-09-19T15:15:00.931Z,1348067700.931 [MassServo](DEBUG): Uninitialize Mass Servo.
2012-09-19T15:15:00.931Z,1348067700.931 [MassServo](INFO): Powering down
2012-09-19T15:15:00.935Z,1348067700.935 [CBIT](INFO): Clearing failed state for component MassServo
2012-09-19T15:15:00.935Z,1348067700.935 [MassServo] No Fault, FailCount= 0
2012-09-19T15:15:01.339Z,1348067701.339 [MassServo](DEBUG): Initializing EZServoServo.
2012-09-19T15:15:01.459Z,1348067701.459 [MassServo](DEBUG): Initialization error opening port: port not yet opened
2012-09-19T15:15:01.459Z,1348067701.459 [MassServo](DEBUG): Initializing MassServo.
2012-09-19T15:15:05.162Z,1348067705.162 [MassServo](FAULT): Overload Error
2012-09-19T15:15:05.163Z,1348067705.163 [MassServo] Hardware Fault, FailCount= 1
2012-09-19T15:15:05.163Z,1348067705.163 [MassServo](ERROR): Hardware Fault
2012-09-19T15:15:05.186Z,1348067705.186 [CBIT](ERROR): Hardware Fault in component: MassServo
2012-09-19T15:15:05.543Z,1348067705.543 [MassServo](DEBUG): Uninitialize Mass Servo.
2012-09-19T15:15:05.543Z,1348067705.543 [MassServo](INFO): Powering down
2012-09-19T15:15:05.547Z,1348067705.547 [CBIT](INFO): Clearing failed state for component MassServo
2012-09-19T15:15:05.547Z,1348067705.547 [MassServo] No Fault, FailCount= 0
2012-09-19T15:15:05.951Z,1348067705.951 [MassServo](DEBUG): Initializing EZServoServo.
2012-09-19T15:15:06.071Z,1348067706.071 [MassServo](DEBUG): Initialization error opening port: port not yet opened
2012-09-19T15:15:06.072Z,1348067706.072 [MassServo](DEBUG): Initializing MassServo.
2012-09-19T15:15:10.638Z,1348067710.638 [MassServo](FAULT): Overload Error
2012-09-19T15:15:10.639Z,1348067710.639 [MassServo] Hardware Fault, FailCount= 1
2012-09-19T15:15:10.639Z,1348067710.639 [MassServo](ERROR): Hardware Fault
2012-09-19T15:15:10.662Z,1348067710.662 [CBIT](ERROR): Hardware Fault in component: MassServo
2012-09-19T15:15:11.543Z,1348067711.543 [MassServo](DEBUG): Uninitialize Mass Servo.
2012-09-19T15:15:11.543Z,1348067711.543 [MassServo](INFO): Powering down
2012-09-19T15:15:11.547Z,1348067711.546 [CBIT](INFO): Clearing failed state for component MassServo
2012-09-19T15:15:11.547Z,1348067711.547 [MassServo] No Fault, FailCount= 0
2012-09-19T15:15:11.697Z,1348067711.697 [MassServo](DEBUG): Initializing EZServoServo.
2012-09-19T15:15:11.827Z,1348067711.827 [MassServo](DEBUG): Initialization error opening port: port not yet opened
2012-09-19T15:15:11.827Z,1348067711.827 [MassServo](DEBUG): Initializing MassServo.
2012-09-19T15:15:15.422Z,1348067715.422 [MassServo](FAULT): Overload Error
2012-09-19T15:15:15.423Z,1348067715.422 [MassServo] Hardware Fault, FailCount= 1
2012-09-19T15:15:15.423Z,1348067715.422 [MassServo](ERROR): Hardware Fault
2012-09-19T15:15:15.426Z,1348067715.426 [CBIT](ERROR): Hardware Fault in component: MassServo
2012-09-19T15:15:15.567Z,1348067715.567 [MassServo](DEBUG): Uninitialize Mass Servo.
2012-09-19T15:15:15.567Z,1348067715.567 [MassServo](INFO): Powering down
2012-09-19T15:15:15.571Z,1348067715.570 [CBIT](INFO): Clearing failed state for component MassServo
2012-09-19T15:15:15.571Z,1348067715.571 [MassServo] No Fault, FailCount= 0
2012-09-19T15:15:15.967Z,1348067715.967 [MassServo](DEBUG): Initializing EZServoServo.
2012-09-19T15:15:16.087Z,1348067716.087 [MassServo](DEBUG): Initialization error opening port: port not yet opened
2012-09-19T15:15:16.087Z,1348067716.088 [MassServo](DEBUG): Initializing MassServo.
2012-09-19T15:15:19.870Z,1348067719.870 [MassServo](FAULT): Overload Error
2012-09-19T15:15:19.871Z,1348067719.871 [MassServo] Hardware Fault, FailCount= 1
2012-09-19T15:15:19.871Z,1348067719.871 [MassServo](ERROR): Hardware Fault
2012-09-19T15:15:19.894Z,1348067719.894 [CBIT](ERROR): Hardware Fault in component: MassServo
2012-09-19T15:15:20.251Z,1348067720.251 [MassServo](DEBUG): Uninitialize Mass Servo.
2012-09-19T15:15:20.251Z,1348067720.251 [MassServo](INFO): Powering down
2012-09-19T15:15:20.255Z,1348067720.254 [CBIT](INFO): Clearing failed state for component MassServo
2012-09-19T15:15:20.255Z,1348067720.255 [MassServo] No Fault, FailCount= 0
2012-09-19T15:15:20.651Z,1348067720.651 [MassServo](DEBUG): Initializing EZServoServo.
2012-09-19T15:15:20.783Z,1348067720.783 [MassServo](DEBUG): Initialization error opening port: port not yet opened
2012-09-19T15:15:20.783Z,1348067720.783 [MassServo](DEBUG): Initializing MassServo.
2012-09-19T15:15:24.491Z,1348067724.490 [MassServo](FAULT): Overload Error
2012-09-19T15:15:24.491Z,1348067724.491 [MassServo] Hardware Fault, FailCount= 1
2012-09-19T15:15:24.491Z,1348067724.491 [MassServo](ERROR): Hardware Fault
2012-09-19T15:15:24.514Z,1348067724.514 [CBIT](ERROR): Hardware Fault in component: MassServo
2012-09-19T15:15:24.597Z,1348067724.597 [PAR_Licor](ERROR): PAR reading out of range: -0.020663 uMol/s/m2
2012-09-19T15:15:24.659Z,1348067724.659 [MassServo](DEBUG): Uninitialize Mass Servo.
2012-09-19T15:15:24.659Z,1348067724.659 [MassServo](INFO): Powering down
2012-09-19T15:15:24.663Z,1348067724.663 [CBIT](INFO): Clearing failed state for component MassServo
2012-09-19T15:15:24.663Z,1348067724.663 [MassServo] No Fault, FailCount= 0
2012-09-19T15:15:25.107Z,1348067725.107 [MassServo](DEBUG): Initializing EZServoServo.
2012-09-19T15:15:25.228Z,1348067725.227 [MassServo](DEBUG): Initialization error opening port: port not yet opened
2012-09-19T15:15:25.228Z,1348067725.228 [MassServo](DEBUG): Initializing MassServo.
2012-09-19T15:15:28.818Z,1348067728.818 [MassServo](FAULT): Overload Error
2012-09-19T15:15:28.819Z,1348067728.819 [MassServo] Hardware Fault, FailCount= 1
2012-09-19T15:15:28.819Z,1348067728.819 [MassServo](ERROR): Hardware Fault
2012-09-19T15:15:28.842Z,1348067728.842 [CBIT](ERROR): Hardware Fault in component: MassServo
2012-09-19T15:15:28.991Z,1348067728.991 [MassServo](DEBUG): Uninitialize Mass Servo.
2012-09-19T15:15:28.991Z,1348067728.991 [MassServo](INFO): Powering down
2012-09-19T15:15:28.994Z,1348067728.994 [CBIT](INFO): Clearing failed state for component MassServo
2012-09-19T15:15:28.995Z,1348067728.995 [MassServo] No Fault, FailCount= 0
2012-09-19T15:15:29.383Z,1348067729.383 [MassServo](DEBUG): Initializing EZServoServo.
2012-09-19T15:15:29.503Z,1348067729.503 [MassServo](DEBUG): Initialization error opening port: port not yet opened
2012-09-19T15:15:29.504Z,1348067729.504 [MassServo](DEBUG): Initializing MassServo.
2012-09-19T15:15:33.122Z,1348067733.122 [MassServo](FAULT): Overload Error
2012-09-19T15:15:33.123Z,1348067733.122 [MassServo] Hardware Fault, FailCount= 1
2012-09-19T15:15:33.123Z,1348067733.123 [MassServo](ERROR): Hardware Fault
2012-09-19T15:15:33.146Z,1348067733.145 [CBIT](ERROR): Hardware Fault in component: MassServo
2012-09-19T15:15:33.291Z,1348067733.291 [MassServo](DEBUG): Uninitialize Mass Servo.
2012-09-19T15:15:33.291Z,1348067733.291 [MassServo](INFO): Powering down
2012-09-19T15:15:33.294Z,1348067733.294 [CBIT](INFO): Clearing failed state for component MassServo
2012-09-19T15:15:33.294Z,1348067733.295 [MassServo] No Fault, FailCount= 0
2012-09-19T15:15:33.683Z,1348067733.683 [MassServo](DEBUG): Initializing EZServoServo.
2012-09-19T15:15:33.803Z,1348067733.803 [MassServo](DEBUG): Initialization error opening port: port not yet opened
2012-09-19T15:15:33.804Z,1348067733.804 [MassServo](DEBUG): Initializing MassServo.
2012-09-19T15:15:37.618Z,1348067737.618 [MassServo](FAULT): Overload Error
2012-09-19T15:15:37.619Z,1348067737.619 [MassServo] Hardware Fault, FailCount= 1
2012-09-19T15:15:37.619Z,1348067737.619 [MassServo](ERROR): Hardware Fault
2012-09-19T15:15:37.642Z,1348067737.642 [CBIT](ERROR): Hardware Fault in component: MassServo
2012-09-19T15:15:37.999Z,1348067737.999 [MassServo](DEBUG): Uninitialize Mass Servo.
2012-09-19T15:15:37.999Z,1348067737.999 [MassServo](INFO): Powering down
2012-09-19T15:15:38.002Z,1348067738.003 [CBIT](INFO): Clearing failed state for component MassServo
2012-09-19T15:15:38.003Z,1348067738.003 [MassServo] No Fault, FailCount= 0
2012-09-19T15:15:38.396Z,1348067738.395 [MassServo](DEBUG): Initializing EZServoServo.
2012-09-19T15:15:38.527Z,1348067738.527 [MassServo](DEBUG): Initialization error opening port: port not yet opened
2012-09-19T15:15:38.527Z,1348067738.527 [MassServo](DEBUG): Initializing MassServo.
2012-09-19T15:15:42.690Z,1348067742.690 [MassServo](FAULT): Overload Error
2012-09-19T15:15:42.691Z,1348067742.691 [MassServo] Hardware Fault, FailCount= 1
2012-09-19T15:15:42.691Z,1348067742.691 [MassServo](ERROR): Hardware Fault
2012-09-19T15:15:42.714Z,1348067742.714 [CBIT](ERROR): Hardware Fault in component: MassServo
2012-09-19T15:15:43.073Z,1348067743.073 [MassServo](DEBUG): Uninitialize Mass Servo.
2012-09-19T15:15:43.073Z,1348067743.073 [MassServo](INFO): Powering down
2012-09-19T15:15:43.076Z,1348067743.076 [CBIT](INFO): Clearing failed state for component MassServo
2012-09-19T15:15:43.076Z,1348067743.076 [MassServo] No Fault, FailCount= 0
2012-09-19T15:15:43.527Z,1348067743.527 [MassServo](DEBUG): Initializing EZServoServo.
2012-09-19T15:15:43.647Z,1348067743.648 [MassServo](DEBUG): Initialization error opening port: port not yet opened
2012-09-19T15:15:43.648Z,1348067743.648 [MassServo](DEBUG): Initializing MassServo.
2012-09-19T15:15:47.347Z,1348067747.346 [MassServo](FAULT): Overload Error
2012-09-19T15:15:47.347Z,1348067747.347 [MassServo] Hardware Fault, FailCount= 1
2012-09-19T15:15:47.347Z,1348067747.347 [MassServo](ERROR): Hardware Fault
2012-09-19T15:15:47.374Z,1348067747.374 [CBIT](ERROR): Hardware Fault in component: MassServo
2012-09-19T15:15:47.723Z,1348067747.723 [MassServo](DEBUG): Uninitialize Mass Servo.
2012-09-19T15:15:47.723Z,1348067747.723 [MassServo](INFO): Powering down
2012-09-19T15:15:47.727Z,1348067747.727 [CBIT](INFO): Clearing failed state for component MassServo
2012-09-19T15:15:47.727Z,1348067747.727 [MassServo] No Fault, FailCount= 0
2012-09-19T15:15:48.127Z,1348067748.127 [MassServo](DEBUG): Initializing EZServoServo.
2012-09-19T15:15:48.247Z,1348067748.247 [MassServo](DEBUG): Initialization error opening port: port not yet opened
2012-09-19T15:15:48.248Z,1348067748.248 [MassServo](DEBUG): Initializing MassServo.
2012-09-19T15:15:52.923Z,1348067752.923 [MassServo](FAULT): Overload Error
2012-09-19T15:15:52.923Z,1348067752.923 [MassServo] Hardware Fault, FailCount= 1
2012-09-19T15:15:52.923Z,1348067752.923 [MassServo](ERROR): Hardware Fault
2012-09-19T15:15:52.947Z,1348067752.947 [CBIT](ERROR): Hardware Fault in component: MassServo
2012-09-19T15:15:53.723Z,1348067753.723 [MassServo](DEBUG): Uninitialize Mass Servo.
2012-09-19T15:15:53.723Z,1348067753.723 [MassServo](INFO): Powering down
2012-09-19T15:15:53.726Z,1348067753.727 [CBIT](INFO): Clearing failed state for component MassServo
2012-09-19T15:15:53.727Z,1348067753.727 [MassServo] No Fault, FailCount= 0
2012-09-19T15:15:53.875Z,1348067753.875 [MassServo](DEBUG): Initializing EZServoServo.
2012-09-19T15:15:53.995Z,1348067753.995 [MassServo](DEBUG): Initialization error opening port: port not yet opened
2012-09-19T15:15:53.996Z,1348067753.996 [MassServo](DEBUG): Initializing MassServo.
2012-09-19T15:15:54.198Z,1348067754.197 [PAR_Licor](ERROR): PAR reading out of range: -0.042916 uMol/s/m2
2012-09-19T15:15:58.414Z,1348067758.414 [MassServo](FAULT): Overload Error
2012-09-19T15:15:58.415Z,1348067758.415 [MassServo] Hardware Fault, FailCount= 1
2012-09-19T15:15:58.415Z,1348067758.415 [MassServo](ERROR): Hardware Fault
2012-09-19T15:15:58.438Z,1348067758.438 [CBIT](ERROR): Hardware Fault in component: MassServo
2012-09-19T15:15:58.671Z,1348067758.671 [MassServo](DEBUG): Uninitialize Mass Servo.
2012-09-19T15:15:58.671Z,1348067758.671 [MassServo](INFO): Powering down
2012-09-19T15:15:58.675Z,1348067758.675 [CBIT](INFO): Clearing failed state for component MassServo
2012-09-19T15:15:58.675Z,1348067758.675 [MassServo] No Fault, FailCount= 0
2012-09-19T15:15:59.023Z,1348067759.023 [MassServo](DEBUG): Initializing EZServoServo.
2012-09-19T15:15:59.144Z,1348067759.144 [MassServo](DEBUG): Initialization error opening port: port not yet opened
2012-09-19T15:15:59.144Z,1348067759.144 [MassServo](DEBUG): Initializing MassServo.
2012-09-19T15:16:02.738Z,1348067762.739 [MassServo](FAULT): Overload Error
2012-09-19T15:16:02.739Z,1348067762.739 [MassServo] Hardware Fault, FailCount= 1
2012-09-19T15:16:02.739Z,1348067762.739 [MassServo](ERROR): Hardware Fault
2012-09-19T15:16:02.762Z,1348067762.762 [CBIT](ERROR): Hardware Fault in component: MassServo
2012-09-19T15:16:02.999Z,1348067762.999 [MassServo](DEBUG): Uninitialize Mass Servo.
2012-09-19T15:16:02.999Z,1348067762.999 [MassServo](INFO): Powering down
2012-09-19T15:16:03.003Z,1348067763.003 [CBIT](INFO): Clearing failed state for component MassServo
2012-09-19T15:16:03.003Z,1348067763.003 [MassServo] No Fault, FailCount= 0
2012-09-19T15:16:03.327Z,1348067763.327 [MassServo](DEBUG): Initializing EZServoServo.
2012-09-19T15:16:03.447Z,1348067763.447 [MassServo](DEBUG): Initialization error opening port: port not yet opened
2012-09-19T15:16:03.447Z,1348067763.447 [MassServo](DEBUG): Initializing MassServo.
2012-09-19T15:16:07.082Z,1348067767.082 [MassServo](FAULT): Overload Error
2012-09-19T15:16:07.082Z,1348067767.082 [MassServo] Hardware Fault, FailCount= 1
2012-09-19T15:16:07.083Z,1348067767.082 [MassServo](ERROR): Hardware Fault
2012-09-19T15:16:07.086Z,1348067767.086 [CBIT](ERROR): Hardware Fault in component: MassServo
2012-09-19T15:16:07.223Z,1348067767.223 [MassServo](DEBUG): Uninitialize Mass Servo.
2012-09-19T15:16:07.223Z,1348067767.223 [MassServo](INFO): Powering down
2012-09-19T15:16:07.227Z,1348067767.227 [CBIT](INFO): Clearing failed state for component MassServo
2012-09-19T15:16:07.227Z,1348067767.227 [MassServo] No Fault, FailCount= 0
2012-09-19T15:16:07.631Z,1348067767.631 [MassServo](DEBUG): Initializing EZServoServo.
2012-09-19T15:16:07.751Z,1348067767.751 [MassServo](DEBUG): Initialization error opening port: port not yet opened
2012-09-19T15:16:07.752Z,1348067767.752 [MassServo](DEBUG): Initializing MassServo.
2012-09-19T15:16:11.366Z,1348067771.366 [MassServo](FAULT): Overload Error
2012-09-19T15:16:11.367Z,1348067771.367 [MassServo] Hardware Fault, FailCount= 1
2012-09-19T15:16:11.367Z,1348067771.367 [MassServo](ERROR): Hardware Fault
2012-09-19T15:16:11.370Z,1348067771.371 [CBIT](ERROR): Hardware Fault in component: MassServo
2012-09-19T15:16:11.511Z,1348067771.511 [MassServo](DEBUG): Uninitialize Mass Servo.
2012-09-19T15:16:11.511Z,1348067771.511 [MassServo](INFO): Powering down
2012-09-19T15:16:11.515Z,1348067771.515 [CBIT](INFO): Clearing failed state for component MassServo
2012-09-19T15:16:11.515Z,1348067771.515 [MassServo] No Fault, FailCount= 0
2012-09-19T15:16:11.911Z,1348067771.911 [MassServo](DEBUG): Initializing EZServoServo.
2012-09-19T15:16:12.043Z,1348067772.043 [MassServo](DEBUG): Initialization error opening port: port not yet opened
2012-09-19T15:16:12.044Z,1348067772.044 [MassServo](DEBUG): Initializing MassServo.
2012-09-19T15:16:12.649Z,1348067772.649 [PAR_Licor](ERROR): PAR reading out of range: -0.011126 uMol/s/m2
2012-09-19T15:16:15.775Z,1348067775.774 [MassServo](FAULT): Overload Error
2012-09-19T15:16:15.775Z,1348067775.775 [MassServo] Hardware Fault, FailCount= 1
2012-09-19T15:16:15.775Z,1348067775.775 [MassServo](ERROR): Hardware Fault
2012-09-19T15:16:15.798Z,1348067775.798 [CBIT](ERROR): Hardware Fault in component: MassServo
2012-09-19T15:16:16.155Z,1348067776.155 [MassServo](DEBUG): Uninitialize Mass Servo.
2012-09-19T15:16:16.155Z,1348067776.155 [MassServo](INFO): Powering down
2012-09-19T15:16:16.159Z,1348067776.158 [CBIT](INFO): Clearing failed state for component MassServo
2012-09-19T15:16:16.159Z,1348067776.159 [MassServo] No Fault, FailCount= 0
2012-09-19T15:16:16.552Z,1348067776.552 [MassServo](DEBUG): Initializing EZServoServo.
2012-09-19T15:16:16.672Z,1348067776.671 [MassServo](DEBUG): Initialization error opening port: port not yet opened
2012-09-19T15:16:16.672Z,1348067776.672 [MassServo](DEBUG): Initializing MassServo.
2012-09-19T15:16:16.893Z,1348067776.893 [PAR_Licor](ERROR): PAR reading out of range: -0.028611 uMol/s/m2
2012-09-19T15:16:17.691Z,1348067777.691 [PAR_Licor](ERROR): PAR reading out of range: -0.011126 uMol/s/m2
2012-09-19T15:16:19.397Z,1348067779.397 [PAR_Licor](ERROR): PAR reading out of range: -0.004768 uMol/s/m2
2012-09-19T15:16:20.869Z,1348067780.869 [MassServo](FAULT): Overload Error
2012-09-19T15:16:20.869Z,1348067780.869 [MassServo] Hardware Fault, FailCount= 1
2012-09-19T15:16:20.869Z,1348067780.869 [MassServo](ERROR): Hardware Fault
2012-09-19T15:16:20.893Z,1348067780.893 [CBIT](ERROR): Hardware Fault in component: MassServo
2012-09-19T15:16:21.231Z,1348067781.231 [MassServo](DEBUG): Uninitialize Mass Servo.
2012-09-19T15:16:21.231Z,1348067781.231 [MassServo](INFO): Powering down
2012-09-19T15:16:21.235Z,1348067781.235 [CBIT](INFO): Clearing failed state for component MassServo
2012-09-19T15:16:21.235Z,1348067781.235 [MassServo] No Fault, FailCount= 0
2012-09-19T15:16:21.683Z,1348067781.683 [MassServo](DEBUG): Initializing EZServoServo.
2012-09-19T15:16:21.803Z,1348067781.803 [MassServo](DEBUG): Initialization error opening port: port not yet opened
2012-09-19T15:16:21.803Z,1348067781.803 [MassServo](DEBUG): Initializing MassServo.
2012-09-19T15:16:26.347Z,1348067786.347 [MassServo](FAULT): Overload Error
2012-09-19T15:16:26.347Z,1348067786.347 [MassServo] Hardware Fault, FailCount= 1
2012-09-19T15:16:26.347Z,1348067786.347 [MassServo](ERROR): Hardware Fault
2012-09-19T15:16:26.370Z,1348067786.370 [CBIT](ERROR): Hardware Fault in component: MassServo
2012-09-19T15:16:27.311Z,1348067787.311 [MassServo](DEBUG): Uninitialize Mass Servo.
2012-09-19T15:16:27.311Z,1348067787.311 [MassServo](INFO): Powering down
2012-09-19T15:16:27.315Z,1348067787.315 [CBIT](INFO): Clearing failed state for component MassServo
2012-09-19T15:16:27.315Z,1348067787.315 [MassServo] No Fault, FailCount= 0
2012-09-19T15:16:27.503Z,1348067787.503 [MassServo](DEBUG): Initializing EZServoServo.
2012-09-19T15:16:27.623Z,1348067787.623 [MassServo](DEBUG): Initialization error opening port: port not yet opened
2012-09-19T15:16:27.624Z,1348067787.624 [MassServo](DEBUG): Initializing MassServo.
2012-09-19T15:16:31.382Z,1348067791.382 [MassServo](FAULT): Overload Error
2012-09-19T15:16:31.383Z,1348067791.383 [MassServo] Hardware Fault, FailCount= 1
2012-09-19T15:16:31.383Z,1348067791.383 [MassServo](ERROR): Hardware Fault
2012-09-19T15:16:31.407Z,1348067791.407 [CBIT](ERROR): Hardware Fault in component: MassServo
2012-09-19T15:16:31.783Z,1348067791.783 [MassServo](DEBUG): Uninitialize Mass Servo.
2012-09-19T15:16:31.783Z,1348067791.783 [MassServo](INFO): Powering down
2012-09-19T15:16:31.787Z,1348067791.787 [CBIT](INFO): Clearing failed state for component MassServo
2012-09-19T15:16:31.787Z,1348067791.787 [MassServo] No Fault, FailCount= 0
2012-09-19T15:16:32.159Z,1348067792.159 [MassServo](DEBUG): Initializing EZServoServo.
2012-09-19T15:16:32.280Z,1348067792.280 [MassServo](DEBUG): Initialization error opening port: port not yet opened
2012-09-19T15:16:32.280Z,1348067792.280 [MassServo](DEBUG): Initializing MassServo.
2012-09-19T15:16:32.926Z,1348067792.926 [PAR_Licor](ERROR): PAR reading out of range: -0.039737 uMol/s/m2
2012-09-19T15:16:34.590Z,1348067794.590 [PAR_Licor](ERROR): PAR reading out of range: -0.025432 uMol/s/m2
2012-09-19T15:16:36.063Z,1348067796.063 [MassServo](FAULT): Overload Error
2012-09-19T15:16:36.063Z,1348067796.063 [MassServo] Hardware Fault, FailCount= 1
2012-09-19T15:16:36.063Z,1348067796.063 [MassServo](ERROR): Hardware Fault
2012-09-19T15:16:36.086Z,1348067796.086 [CBIT](ERROR): Hardware Fault in component: MassServo
2012-09-19T15:16:36.439Z,1348067796.439 [MassServo](DEBUG): Uninitialize Mass Servo.
2012-09-19T15:16:36.439Z,1348067796.439 [MassServo](INFO): Powering down
2012-09-19T15:16:36.443Z,1348067796.443 [CBIT](INFO): Clearing failed state for component MassServo
2012-09-19T15:16:36.443Z,1348067796.443 [MassServo] No Fault, FailCount= 0
2012-09-19T15:16:36.799Z,1348067796.799 [MassServo](DEBUG): Initializing EZServoServo.
2012-09-19T15:16:36.930Z,1348067796.931 [MassServo](DEBUG): Initialization error opening port: port not yet opened
2012-09-19T15:16:36.931Z,1348067796.931 [MassServo](DEBUG): Initializing MassServo.
2012-09-19T15:16:39.793Z,1348067799.793 [PAR_Licor](ERROR): PAR reading out of range: -0.007947 uMol/s/m2
2012-09-19T15:16:40.596Z,1348067800.596 [PAR_Licor](ERROR): PAR reading out of range: -0.031790 uMol/s/m2
2012-09-19T15:16:41.070Z,1348067801.070 [MassServo](FAULT): Overload Error
2012-09-19T15:16:41.070Z,1348067801.070 [MassServo] Hardware Fault, FailCount= 1
2012-09-19T15:16:41.071Z,1348067801.070 [MassServo](ERROR): Hardware Fault
2012-09-19T15:16:41.094Z,1348067801.093 [CBIT](ERROR): Hardware Fault in component: MassServo
2012-09-19T15:16:41.431Z,1348067801.431 [MassServo](DEBUG): Uninitialize Mass Servo.
2012-09-19T15:16:41.431Z,1348067801.431 [MassServo](INFO): Powering down
2012-09-19T15:16:41.435Z,1348067801.435 [CBIT](INFO): Clearing failed state for component MassServo
2012-09-19T15:16:41.435Z,1348067801.435 [MassServo] No Fault, FailCount= 0
2012-09-19T15:16:41.831Z,1348067801.831 [MassServo](DEBUG): Initializing EZServoServo.
2012-09-19T15:16:41.951Z,1348067801.951 [MassServo](DEBUG): Initialization error opening port: port not yet opened
2012-09-19T15:16:41.952Z,1348067801.952 [MassServo](DEBUG): Initializing MassServo.
2012-09-19T15:16:45.738Z,1348067805.739 [MassServo](FAULT): Overload Error
2012-09-19T15:16:45.739Z,1348067805.739 [MassServo] Hardware Fault, FailCount= 1
2012-09-19T15:16:45.739Z,1348067805.739 [MassServo](ERROR): Hardware Fault
2012-09-19T15:16:45.762Z,1348067805.762 [CBIT](ERROR): Hardware Fault in component: MassServo
2012-09-19T15:16:46.103Z,1348067806.103 [MassServo](DEBUG): Uninitialize Mass Servo.
2012-09-19T15:16:46.103Z,1348067806.103 [MassServo](INFO): Powering down
2012-09-19T15:16:46.106Z,1348067806.106 [CBIT](INFO): Clearing failed state for component MassServo
2012-09-19T15:16:46.106Z,1348067806.106 [MassServo] No Fault, FailCount= 0
2012-09-19T15:16:46.483Z,1348067806.483 [MassServo](DEBUG): Initializing EZServoServo.
2012-09-19T15:16:46.603Z,1348067806.603 [MassServo](DEBUG): Initialization error opening port: port not yet opened
2012-09-19T15:16:46.603Z,1348067806.603 [MassServo](DEBUG): Initializing MassServo.
2012-09-19T15:16:50.366Z,1348067810.366 [MassServo](FAULT): Overload Error
2012-09-19T15:16:50.367Z,1348067810.367 [MassServo] Hardware Fault, FailCount= 1
2012-09-19T15:16:50.367Z,1348067810.367 [MassServo](ERROR): Hardware Fault
2012-09-19T15:16:50.390Z,1348067810.390 [CBIT](ERROR): Hardware Fault in component: MassServo
2012-09-19T15:16:50.739Z,1348067810.739 [MassServo](DEBUG): Uninitialize Mass Servo.
2012-09-19T15:16:50.739Z,1348067810.739 [MassServo](INFO): Powering down
2012-09-19T15:16:50.743Z,1348067810.743 [CBIT](INFO): Clearing failed state for component MassServo
2012-09-19T15:16:50.743Z,1348067810.743 [MassServo] No Fault, FailCount= 0
2012-09-19T15:16:51.115Z,1348067811.115 [MassServo](DEBUG): Initializing EZServoServo.
2012-09-19T15:16:51.235Z,1348067811.235 [MassServo](DEBUG): Initialization error opening port: port not yet opened
2012-09-19T15:16:51.236Z,1348067811.236 [MassServo](DEBUG): Initializing MassServo.
2012-09-19T15:16:55.638Z,1348067815.638 [MassServo](FAULT): Overload Error
2012-09-19T15:16:55.638Z,1348067815.638 [MassServo] Hardware Fault, FailCount= 1
2012-09-19T15:16:55.639Z,1348067815.639 [MassServo](ERROR): Hardware Fault
2012-09-19T15:16:55.662Z,1348067815.662 [CBIT](ERROR): Hardware Fault in component: MassServo
2012-09-19T15:16:55.869Z,1348067815.869 [MassServo](DEBUG): Uninitialize Mass Servo.
2012-09-19T15:16:55.870Z,1348067815.870 [MassServo](INFO): Powering down
2012-09-19T15:16:55.873Z,1348067815.873 [CBIT](INFO): Clearing failed state for component MassServo
2012-09-19T15:16:55.873Z,1348067815.873 [MassServo] No Fault, FailCount= 0
2012-09-19T15:16:56.271Z,1348067816.271 [MassServo](DEBUG): Initializing EZServoServo.
2012-09-19T15:16:56.391Z,1348067816.391 [MassServo](DEBUG): Initialization error opening port: port not yet opened
2012-09-19T15:16:56.392Z,1348067816.392 [MassServo](DEBUG): Initializing MassServo.
2012-09-19T15:17:00.575Z,1348067820.575 [MassServo](FAULT): Overload Error
2012-09-19T15:17:00.575Z,1348067820.575 [MassServo] Hardware Fault, FailCount= 1
2012-09-19T15:17:00.575Z,1348067820.575 [MassServo](ERROR): Hardware Fault
2012-09-19T15:17:00.598Z,1348067820.598 [CBIT](ERROR): Hardware Fault in component: MassServo
2012-09-19T15:17:01.419Z,1348067821.419 [MassServo](DEBUG): Uninitialize Mass Servo.
2012-09-19T15:17:01.419Z,1348067821.419 [MassServo](INFO): Powering down
2012-09-19T15:17:01.423Z,1348067821.423 [CBIT](INFO): Clearing failed state for component MassServo
2012-09-19T15:17:01.423Z,1348067821.423 [MassServo] No Fault, FailCount= 0
2012-09-19T15:17:01.619Z,1348067821.619 [MassServo](DEBUG): Initializing EZServoServo.
2012-09-19T15:17:01.739Z,1348067821.739 [MassServo](DEBUG): Initialization error opening port: port not yet opened
2012-09-19T15:17:01.740Z,1348067821.740 [MassServo](DEBUG): Initializing MassServo.
2012-09-19T15:17:01.937Z,1348067821.937 [PAR_Licor](ERROR): PAR reading out of range: -0.012716 uMol/s/m2
2012-09-19T15:17:02.711Z,1348067822.711 [PAR_Licor](ERROR): PAR reading out of range: -0.019074 uMol/s/m2
2012-09-19T15:17:05.370Z,1348067825.370 [MassServo](FAULT): Overload Error
2012-09-19T15:17:05.370Z,1348067825.371 [MassServo] Hardware Fault, FailCount= 1
2012-09-19T15:17:05.370Z,1348067825.371 [MassServo](ERROR): Hardware Fault
2012-09-19T15:17:05.394Z,1348067825.394 [CBIT](ERROR): Hardware Fault in component: MassServo
2012-09-19T15:17:05.575Z,1348067825.575 [MassServo](DEBUG): Uninitialize Mass Servo.
2012-09-19T15:17:05.575Z,1348067825.575 [MassServo](INFO): Powering down
2012-09-19T15:17:05.579Z,1348067825.579 [CBIT](INFO): Clearing failed state for component MassServo
2012-09-19T15:17:05.579Z,1348067825.579 [MassServo] No Fault, FailCount= 0
2012-09-19T15:17:05.939Z,1348067825.939 [MassServo](DEBUG): Initializing EZServoServo.
2012-09-19T15:17:06.059Z,1348067826.059 [MassServo](DEBUG): Initialization error opening port: port not yet opened
2012-09-19T15:17:06.059Z,1348067826.059 [MassServo](DEBUG): Initializing MassServo.
2012-09-19T15:17:08.675Z,1348067828.675 [PAR_Licor](ERROR): PAR reading out of range: -0.001589 uMol/s/m2
2012-09-19T15:17:09.830Z,1348067829.830 [MassServo](FAULT): Overload Error
2012-09-19T15:17:09.831Z,1348067829.831 [MassServo] Hardware Fault, FailCount= 1
2012-09-19T15:17:09.831Z,1348067829.831 [MassServo](ERROR): Hardware Fault
2012-09-19T15:17:09.854Z,1348067829.854 [CBIT](ERROR): Hardware Fault in component: MassServo
2012-09-19T15:17:10.207Z,1348067830.207 [MassServo](DEBUG): Uninitialize Mass Servo.
2012-09-19T15:17:10.207Z,1348067830.207 [MassServo](INFO): Powering down
2012-09-19T15:17:10.211Z,1348067830.211 [CBIT](INFO): Clearing failed state for component MassServo
2012-09-19T15:17:10.211Z,1348067830.211 [MassServo] No Fault, FailCount= 0
2012-09-19T15:17:10.548Z,1348067830.548 [PAR_Licor](ERROR): PAR reading out of range: 0.000000 uMol/s/m2
2012-09-19T15:17:10.611Z,1348067830.611 [MassServo](DEBUG): Initializing EZServoServo.
2012-09-19T15:17:10.743Z,1348067830.743 [MassServo](DEBUG): Initialization error opening port: port not yet opened
2012-09-19T15:17:10.744Z,1348067830.744 [MassServo](DEBUG): Initializing MassServo.
2012-09-19T15:17:14.547Z,1348067834.547 [MassServo](FAULT): Overload Error
2012-09-19T15:17:14.547Z,1348067834.547 [MassServo] Hardware Fault, FailCount= 1
2012-09-19T15:17:14.547Z,1348067834.547 [MassServo](ERROR): Hardware Fault
2012-09-19T15:17:14.570Z,1348067834.570 [CBIT](ERROR): Hardware Fault in component: MassServo
2012-09-19T15:17:14.784Z,1348067834.784 [PAR_Licor](ERROR): PAR reading out of range: -0.049274 uMol/s/m2
2012-09-19T15:17:14.847Z,1348067834.847 [MassServo](DEBUG): Uninitialize Mass Servo.
2012-09-19T15:17:14.847Z,1348067834.847 [MassServo](INFO): Powering down
2012-09-19T15:17:14.851Z,1348067834.851 [CBIT](INFO): Clearing failed state for component MassServo
2012-09-19T15:17:14.851Z,1348067834.851 [MassServo] No Fault, FailCount= 0
2012-09-19T15:17:15.311Z,1348067835.311 [MassServo](DEBUG): Initializing EZServoServo.
2012-09-19T15:17:15.431Z,1348067835.431 [MassServo](DEBUG): Initialization error opening port: port not yet opened
2012-09-19T15:17:15.432Z,1348067835.432 [MassServo](DEBUG): Initializing MassServo.
2012-09-19T15:17:19.631Z,1348067839.631 [MassServo](FAULT): Overload Error
2012-09-19T15:17:19.631Z,1348067839.631 [MassServo] Hardware Fault, FailCount= 1
2012-09-19T15:17:19.631Z,1348067839.631 [MassServo](ERROR): Hardware Fault
2012-09-19T15:17:19.654Z,1348067839.654 [CBIT](ERROR): Hardware Fault in component: MassServo
2012-09-19T15:17:19.897Z,1348067839.897 [PAR_Licor](ERROR): PAR reading out of range: -0.012716 uMol/s/m2
2012-09-19T15:17:19.963Z,1348067839.963 [MassServo](DEBUG): Uninitialize Mass Servo.
2012-09-19T15:17:19.963Z,1348067839.963 [MassServo](INFO): Powering down
2012-09-19T15:17:19.966Z,1348067839.967 [CBIT](INFO): Clearing failed state for component MassServo
2012-09-19T15:17:19.967Z,1348067839.967 [MassServo] No Fault, FailCount= 0
2012-09-19T15:17:20.355Z,1348067840.355 [MassServo](DEBUG): Initializing EZServoServo.
2012-09-19T15:17:20.475Z,1348067840.475 [MassServo](DEBUG): Initialization error opening port: port not yet opened
2012-09-19T15:17:20.475Z,1348067840.475 [MassServo](DEBUG): Initializing MassServo.
2012-09-19T15:17:21.117Z,1348067841.117 [PAR_Licor](ERROR): PAR reading out of range: -0.001589 uMol/s/m2
2012-09-19T15:17:23.327Z,1348067843.327 [PAR_Licor](ERROR): PAR reading out of range: -0.042916 uMol/s/m2
2012-09-19T15:17:24.211Z,1348067844.211 [MassServo](FAULT): Overload Error
2012-09-19T15:17:24.211Z,1348067844.211 [MassServo] Hardware Fault, FailCount= 1
2012-09-19T15:17:24.211Z,1348067844.211 [MassServo](ERROR): Hardware Fault
2012-09-19T15:17:24.234Z,1348067844.234 [CBIT](ERROR): Hardware Fault in component: MassServo
2012-09-19T15:17:24.591Z,1348067844.591 [MassServo](DEBUG): Uninitialize Mass Servo.
2012-09-19T15:17:24.591Z,1348067844.592 [MassServo](INFO): Powering down
2012-09-19T15:17:24.595Z,1348067844.595 [CBIT](INFO): Clearing failed state for component MassServo
2012-09-19T15:17:24.595Z,1348067844.595 [MassServo] No Fault, FailCount= 0
2012-09-19T15:17:24.991Z,1348067844.991 [MassServo](DEBUG): Initializing EZServoServo.
2012-09-19T15:17:25.112Z,1348067845.112 [MassServo](DEBUG): Initialization error opening port: port not yet opened
2012-09-19T15:17:25.112Z,1348067845.112 [MassServo](DEBUG): Initializing MassServo.
2012-09-19T15:17:26.229Z,1348067846.229 [PAR_Licor](ERROR): PAR reading out of range: -0.076296 uMol/s/m2
2012-09-19T15:17:28.386Z,1348067848.386 [PAR_Licor](ERROR): PAR reading out of range: -0.017484 uMol/s/m2
2012-09-19T15:17:30.283Z,1348067850.283 [MassServo](FAULT): Overload Error
2012-09-19T15:17:30.283Z,1348067850.283 [MassServo] Hardware Fault, FailCount= 1
2012-09-19T15:17:30.283Z,1348067850.283 [MassServo](ERROR): Hardware Fault
2012-09-19T15:17:30.306Z,1348067850.306 [CBIT](ERROR): Hardware Fault in component: MassServo
2012-09-19T15:17:30.551Z,1348067850.551 [MassServo](DEBUG): Uninitialize Mass Servo.
2012-09-19T15:17:30.551Z,1348067850.551 [MassServo](INFO): Powering down
2012-09-19T15:17:30.555Z,1348067850.555 [CBIT](INFO): Clearing failed state for component MassServo
2012-09-19T15:17:30.555Z,1348067850.555 [MassServo] No Fault, FailCount= 0
2012-09-19T15:17:30.875Z,1348067850.875 [MassServo](DEBUG): Initializing EZServoServo.
2012-09-19T15:17:31.007Z,1348067851.007 [MassServo](DEBUG): Initialization error opening port: port not yet opened
2012-09-19T15:17:31.007Z,1348067851.007 [MassServo](DEBUG): Initializing MassServo.
2012-09-19T15:17:34.634Z,1348067854.634 [MassServo](FAULT): Overload Error
2012-09-19T15:17:34.635Z,1348067854.635 [MassServo] Hardware Fault, FailCount= 1
2012-09-19T15:17:34.635Z,1348067854.635 [MassServo](ERROR): Hardware Fault
2012-09-19T15:17:34.638Z,1348067854.638 [CBIT](ERROR): Hardware Fault in component: MassServo
2012-09-19T15:17:34.779Z,1348067854.779 [MassServo](DEBUG): Uninitialize Mass Servo.
2012-09-19T15:17:34.779Z,1348067854.779 [MassServo](INFO): Powering down
2012-09-19T15:17:34.782Z,1348067854.782 [CBIT](INFO): Clearing failed state for component MassServo
2012-09-19T15:17:34.783Z,1348067854.783 [MassServo] No Fault, FailCount= 0
2012-09-19T15:17:35.207Z,1348067855.207 [MassServo](DEBUG): Initializing EZServoServo.
2012-09-19T15:17:35.328Z,1348067855.328 [MassServo](DEBUG): Initialization error opening port: port not yet opened
2012-09-19T15:17:35.328Z,1348067855.328 [MassServo](DEBUG): Initializing MassServo.
2012-09-19T15:17:38.950Z,1348067858.950 [MassServo](FAULT): Overload Error
2012-09-19T15:17:38.950Z,1348067858.950 [MassServo] Hardware Fault, FailCount= 1
2012-09-19T15:17:38.951Z,1348067858.951 [MassServo](ERROR): Hardware Fault
2012-09-19T15:17:38.954Z,1348067858.954 [CBIT](ERROR): Hardware Fault in component: MassServo
2012-09-19T15:17:39.099Z,1348067859.099 [MassServo](DEBUG): Uninitialize Mass Servo.
2012-09-19T15:17:39.099Z,1348067859.099 [MassServo](INFO): Powering down
2012-09-19T15:17:39.102Z,1348067859.102 [CBIT](INFO): Clearing failed state for component MassServo
2012-09-19T15:17:39.103Z,1348067859.103 [MassServo] No Fault, FailCount= 0
2012-09-19T15:17:39.491Z,1348067859.491 [MassServo](DEBUG): Initializing EZServoServo.
2012-09-19T15:17:39.612Z,1348067859.612 [MassServo](DEBUG): Initialization error opening port: port not yet opened
2012-09-19T15:17:39.612Z,1348067859.612 [MassServo](DEBUG): Initializing MassServo.
2012-09-19T15:17:41.035Z,1348067861.035 [PAR_Licor](ERROR): PAR reading out of range: -0.031790 uMol/s/m2
2012-09-19T15:17:43.522Z,1348067863.523 [MassServo](FAULT): Overload Error
2012-09-19T15:17:43.523Z,1348067863.523 [MassServo] Hardware Fault, FailCount= 1
2012-09-19T15:17:43.523Z,1348067863.523 [MassServo](ERROR): Hardware Fault
2012-09-19T15:17:43.546Z,1348067863.546 [CBIT](ERROR): Hardware Fault in component: MassServo
2012-09-19T15:17:43.843Z,1348067863.843 [MassServo](DEBUG): Uninitialize Mass Servo.
2012-09-19T15:17:43.844Z,1348067863.843 [MassServo](INFO): Powering down
2012-09-19T15:17:43.847Z,1348067863.847 [CBIT](INFO): Clearing failed state for component MassServo
2012-09-19T15:17:43.847Z,1348067863.847 [MassServo] No Fault, FailCount= 0
2012-09-19T15:17:44.251Z,1348067864.251 [MassServo](DEBUG): Initializing EZServoServo.
2012-09-19T15:17:44.371Z,1348067864.371 [MassServo](DEBUG): Initialization error opening port: port not yet opened
2012-09-19T15:17:44.371Z,1348067864.371 [MassServo](DEBUG): Initializing MassServo.
2012-09-19T15:17:48.543Z,1348067868.543 [MassServo](FAULT): Overload Error
2012-09-19T15:17:48.543Z,1348067868.543 [MassServo] Hardware Fault, FailCount= 1
2012-09-19T15:17:48.543Z,1348067868.543 [MassServo](ERROR): Hardware Fault
2012-09-19T15:17:48.566Z,1348067868.566 [CBIT](ERROR): Hardware Fault in component: MassServo
2012-09-19T15:17:48.919Z,1348067868.919 [MassServo](DEBUG): Uninitialize Mass Servo.
2012-09-19T15:17:48.919Z,1348067868.919 [MassServo](INFO): Powering down
2012-09-19T15:17:48.922Z,1348067868.922 [CBIT](INFO): Clearing failed state for component MassServo
2012-09-19T15:17:48.923Z,1348067868.922 [MassServo] No Fault, FailCount= 0
2012-09-19T15:17:49.315Z,1348067869.315 [MassServo](DEBUG): Initializing EZServoServo.
2012-09-19T15:17:49.435Z,1348067869.435 [MassServo](DEBUG): Initialization error opening port: port not yet opened
2012-09-19T15:17:49.435Z,1348067869.435 [MassServo](DEBUG): Initializing MassServo.
2012-09-19T15:17:53.206Z,1348067873.207 [MassServo](FAULT): Overload Error
2012-09-19T15:17:53.207Z,1348067873.207 [MassServo] Hardware Fault, FailCount= 1
2012-09-19T15:17:53.207Z,1348067873.207 [MassServo](ERROR): Hardware Fault
2012-09-19T15:17:53.230Z,1348067873.230 [CBIT](ERROR): Hardware Fault in component: MassServo
2012-09-19T15:17:53.627Z,1348067873.627 [MassServo](DEBUG): Uninitialize Mass Servo.
2012-09-19T15:17:53.627Z,1348067873.627 [MassServo](INFO): Powering down
2012-09-19T15:17:53.631Z,1348067873.631 [CBIT](INFO): Clearing failed state for component MassServo
2012-09-19T15:17:53.631Z,1348067873.631 [MassServo] No Fault, FailCount= 0
2012-09-19T15:17:54.020Z,1348067874.020 [MassServo](DEBUG): Initializing EZServoServo.
2012-09-19T15:17:54.140Z,1348067874.140 [MassServo](DEBUG): Initialization error opening port: port not yet opened
2012-09-19T15:17:54.140Z,1348067874.140 [MassServo](DEBUG): Initializing MassServo.
2012-09-19T15:17:57.818Z,1348067877.818 [MassServo](FAULT): Overload Error
2012-09-19T15:17:57.819Z,1348067877.819 [MassServo] Hardware Fault, FailCount= 1
2012-09-19T15:17:57.819Z,1348067877.819 [MassServo](ERROR): Hardware Fault
2012-09-19T15:17:57.842Z,1348067877.842 [CBIT](ERROR): Hardware Fault in component: MassServo
2012-09-19T15:17:58.202Z,1348067878.202 [MassServo](DEBUG): Uninitialize Mass Servo.
2012-09-19T15:17:58.202Z,1348067878.202 [MassServo](INFO): Powering down
2012-09-19T15:17:58.205Z,1348067878.205 [CBIT](INFO): Clearing failed state for component MassServo
2012-09-19T15:17:58.205Z,1348067878.205 [MassServo] No Fault, FailCount= 0
2012-09-19T15:17:58.700Z,1348067878.700 [MassServo](DEBUG): Initializing EZServoServo.
2012-09-19T15:17:58.831Z,1348067878.831 [MassServo](DEBUG): Initialization error opening port: port not yet opened
2012-09-19T15:17:58.831Z,1348067878.831 [MassServo](DEBUG): Initializing MassServo.
2012-09-19T15:18:02.451Z,1348067882.451 [MassServo](FAULT): Overload Error
2012-09-19T15:18:02.451Z,1348067882.451 [MassServo] Hardware Fault, FailCount= 1
2012-09-19T15:18:02.451Z,1348067882.451 [MassServo](ERROR): Hardware Fault
2012-09-19T15:18:02.474Z,1348067882.474 [CBIT](ERROR): Hardware Fault in component: MassServo
2012-09-19T15:18:02.855Z,1348067882.855 [MassServo](DEBUG): Uninitialize Mass Servo.
2012-09-19T15:18:02.855Z,1348067882.855 [MassServo](INFO): Powering down
2012-09-19T15:18:02.859Z,1348067882.859 [CBIT](INFO): Clearing failed state for component MassServo
2012-09-19T15:18:02.859Z,1348067882.859 [MassServo] No Fault, FailCount= 0
2012-09-19T15:18:03.255Z,1348067883.255 [MassServo](DEBUG): Initializing EZServoServo.
2012-09-19T15:18:03.375Z,1348067883.375 [MassServo](DEBUG): Initialization error opening port: port not yet opened
2012-09-19T15:18:03.375Z,1348067883.375 [MassServo](DEBUG): Initializing MassServo.
2012-09-19T15:18:06.650Z,1348067886.649 [PAR_Licor](ERROR): PAR reading out of range: -0.006358 uMol/s/m2
2012-09-19T15:18:07.518Z,1348067887.518 [MassServo](FAULT): Overload Error
2012-09-19T15:18:07.519Z,1348067887.519 [MassServo] Hardware Fault, FailCount= 1
2012-09-19T15:18:07.519Z,1348067887.519 [MassServo](ERROR): Hardware Fault
2012-09-19T15:18:07.542Z,1348067887.542 [CBIT](ERROR): Hardware Fault in component: MassServo
2012-09-19T15:18:08.395Z,1348067888.395 [MassServo](DEBUG): Uninitialize Mass Servo.
2012-09-19T15:18:08.395Z,1348067888.395 [MassServo](INFO): Powering down
2012-09-19T15:18:08.398Z,1348067888.398 [CBIT](INFO): Clearing failed state for component MassServo
2012-09-19T15:18:08.399Z,1348067888.399 [MassServo] No Fault, FailCount= 0
2012-09-19T15:18:08.539Z,1348067888.539 [MassServo](DEBUG): Initializing EZServoServo.
2012-09-19T15:18:08.660Z,1348067888.659 [MassServo](DEBUG): Initialization error opening port: port not yet opened
2012-09-19T15:18:08.660Z,1348067888.660 [MassServo](DEBUG): Initializing MassServo.
2012-09-19T15:18:12.982Z,1348067892.982 [PAR_Licor](ERROR): PAR reading out of range: -0.023842 uMol/s/m2
2012-09-19T15:18:13.062Z,1348067893.062 [MassServo](FAULT): Overload Error
2012-09-19T15:18:13.062Z,1348067893.062 [MassServo] Hardware Fault, FailCount= 1
2012-09-19T15:18:13.063Z,1348067893.063 [MassServo](ERROR): Hardware Fault
2012-09-19T15:18:13.085Z,1348067893.085 [CBIT](ERROR): Hardware Fault in component: MassServo
2012-09-19T15:18:13.227Z,1348067893.227 [MassServo](DEBUG): Uninitialize Mass Servo.
2012-09-19T15:18:13.227Z,1348067893.227 [MassServo](INFO): Powering down
2012-09-19T15:18:13.231Z,1348067893.231 [CBIT](INFO): Clearing failed state for component MassServo
2012-09-19T15:18:13.231Z,1348067893.231 [MassServo] No Fault, FailCount= 0
2012-09-19T15:18:13.627Z,1348067893.627 [MassServo](DEBUG): Initializing EZServoServo.
2012-09-19T15:18:13.768Z,1348067893.768 [MassServo](DEBUG): Initialization error opening port: port not yet opened
2012-09-19T15:18:13.768Z,1348067893.768 [MassServo](DEBUG): Initializing MassServo.
2012-09-19T15:18:17.415Z,1348067897.415 [MassServo](FAULT): Overload Error
2012-09-19T15:18:17.415Z,1348067897.415 [MassServo] Hardware Fault, FailCount= 1
2012-09-19T15:18:17.415Z,1348067897.415 [MassServo](ERROR): Hardware Fault
2012-09-19T15:18:17.438Z,1348067897.438 [CBIT](ERROR): Hardware Fault in component: MassServo
2012-09-19T15:18:17.603Z,1348067897.603 [MassServo](DEBUG): Uninitialize Mass Servo.
2012-09-19T15:18:17.604Z,1348067897.603 [MassServo](INFO): Powering down
2012-09-19T15:18:17.607Z,1348067897.607 [CBIT](INFO): Clearing failed state for component MassServo
2012-09-19T15:18:17.607Z,1348067897.607 [MassServo] No Fault, FailCount= 0
2012-09-19T15:18:17.999Z,1348067897.999 [MassServo](DEBUG): Initializing EZServoServo.
2012-09-19T15:18:18.120Z,1348067898.120 [MassServo](DEBUG): Initialization error opening port: port not yet opened
2012-09-19T15:18:18.120Z,1348067898.120 [MassServo](DEBUG): Initializing MassServo.
2012-09-19T15:18:22.118Z,1348067902.118 [MassServo](FAULT): Overload Error
2012-09-19T15:18:22.119Z,1348067902.118 [MassServo] Hardware Fault, FailCount= 1
2012-09-19T15:18:22.119Z,1348067902.119 [MassServo](ERROR): Hardware Fault
2012-09-19T15:18:22.142Z,1348067902.142 [CBIT](ERROR): Hardware Fault in component: MassServo
2012-09-19T15:18:22.319Z,1348067902.319 [MassServo](DEBUG): Uninitialize Mass Servo.
2012-09-19T15:18:22.319Z,1348067902.319 [MassServo](INFO): Powering down
2012-09-19T15:18:22.322Z,1348067902.322 [CBIT](INFO): Clearing failed state for component MassServo
2012-09-19T15:18:22.322Z,1348067902.322 [MassServo] No Fault, FailCount= 0
2012-09-19T15:18:22.696Z,1348067902.696 [PAR_Licor](ERROR): PAR reading out of range: -0.020663 uMol/s/m2
2012-09-19T15:18:22.768Z,1348067902.768 [MassServo](DEBUG): Initializing EZServoServo.
2012-09-19T15:18:22.887Z,1348067902.887 [MassServo](DEBUG): Initialization error opening port: port not yet opened
2012-09-19T15:18:22.888Z,1348067902.888 [MassServo](DEBUG): Initializing MassServo.
2012-09-19T15:18:26.357Z,1348067906.357 [PAR_Licor](ERROR): PAR reading out of range: -0.014305 uMol/s/m2
2012-09-19T15:18:26.458Z,1348067906.458 [MassServo](FAULT): Overload Error
2012-09-19T15:18:26.458Z,1348067906.458 [MassServo] Hardware Fault, FailCount= 1
2012-09-19T15:18:26.459Z,1348067906.459 [MassServo](ERROR): Hardware Fault
2012-09-19T15:18:26.462Z,1348067906.462 [CBIT](ERROR): Hardware Fault in component: MassServo
2012-09-19T15:18:26.631Z,1348067906.631 [MassServo](DEBUG): Uninitialize Mass Servo.
2012-09-19T15:18:26.631Z,1348067906.631 [MassServo](INFO): Powering down
2012-09-19T15:18:26.635Z,1348067906.635 [CBIT](INFO): Clearing failed state for component MassServo
2012-09-19T15:18:26.635Z,1348067906.635 [MassServo] No Fault, FailCount= 0
2012-09-19T15:18:26.942Z,1348067906.942 [PAR_Licor](ERROR): PAR reading out of range: 0.000000 uMol/s/m2
2012-09-19T15:18:27.023Z,1348067907.023 [MassServo](DEBUG): Initializing EZServoServo.
2012-09-19T15:18:27.147Z,1348067907.147 [MassServo](DEBUG): Initialization error opening port: port not yet opened
2012-09-19T15:18:27.147Z,1348067907.147 [MassServo](DEBUG): Initializing MassServo.
2012-09-19T15:18:28.941Z,1348067908.941 [PAR_Licor](ERROR): PAR reading out of range: -0.017484 uMol/s/m2
2012-09-19T15:18:29.743Z,1348067909.743 [PAR_Licor](ERROR): PAR reading out of range: -0.030200 uMol/s/m2
2012-09-19T15:18:31.130Z,1348067911.130 [MassServo](FAULT): Overload Error
2012-09-19T15:18:31.131Z,1348067911.131 [MassServo] Hardware Fault, FailCount= 1
2012-09-19T15:18:31.131Z,1348067911.131 [MassServo](ERROR): Hardware Fault
2012-09-19T15:18:31.154Z,1348067911.154 [CBIT](ERROR): Hardware Fault in component: MassServo
2012-09-19T15:18:31.295Z,1348067911.295 [MassServo](DEBUG): Uninitialize Mass Servo.
2012-09-19T15:18:31.295Z,1348067911.295 [MassServo](INFO): Powering down
2012-09-19T15:18:31.299Z,1348067911.299 [CBIT](INFO): Clearing failed state for component MassServo
2012-09-19T15:18:31.299Z,1348067911.299 [MassServo] No Fault, FailCount= 0
2012-09-19T15:18:31.692Z,1348067911.691 [MassServo](DEBUG): Initializing EZServoServo.
2012-09-19T15:18:31.811Z,1348067911.811 [MassServo](DEBUG): Initialization error opening port: port not yet opened
2012-09-19T15:18:31.812Z,1348067911.812 [MassServo](DEBUG): Initializing MassServo.
2012-09-19T15:18:32.030Z,1348067912.030 [PAR_Licor](ERROR): PAR reading out of range: -0.027021 uMol/s/m2
2012-09-19T15:18:35.435Z,1348067915.435 [MassServo](FAULT): Overload Error
2012-09-19T15:18:35.435Z,1348067915.435 [MassServo] Hardware Fault, FailCount= 1
2012-09-19T15:18:35.435Z,1348067915.435 [MassServo](ERROR): Hardware Fault
2012-09-19T15:18:35.439Z,1348067915.439 [CBIT](ERROR): Hardware Fault in component: MassServo
2012-09-19T15:18:35.579Z,1348067915.579 [MassServo](DEBUG): Uninitialize Mass Servo.
2012-09-19T15:18:35.579Z,1348067915.579 [MassServo](INFO): Powering down
2012-09-19T15:18:35.583Z,1348067915.583 [CBIT](INFO): Clearing failed state for component MassServo
2012-09-19T15:18:35.583Z,1348067915.583 [MassServo] No Fault, FailCount= 0
2012-09-19T15:18:35.979Z,1348067915.979 [MassServo](DEBUG): Initializing EZServoServo.
2012-09-19T15:18:36.099Z,1348067916.099 [MassServo](DEBUG): Initialization error opening port: port not yet opened
2012-09-19T15:18:36.100Z,1348067916.100 [MassServo](DEBUG): Initializing MassServo.
2012-09-19T15:18:38.313Z,1348067918.313 [PAR_Licor](ERROR): PAR reading out of range: -0.039737 uMol/s/m2
2012-09-19T15:18:40.158Z,1348067920.158 [MassServo](FAULT): Overload Error
2012-09-19T15:18:40.159Z,1348067920.158 [MassServo] Hardware Fault, FailCount= 1
2012-09-19T15:18:40.159Z,1348067920.159 [MassServo](ERROR): Hardware Fault
2012-09-19T15:18:40.182Z,1348067920.182 [CBIT](ERROR): Hardware Fault in component: MassServo
2012-09-19T15:18:40.335Z,1348067920.335 [MassServo](DEBUG): Uninitialize Mass Servo.
2012-09-19T15:18:40.335Z,1348067920.335 [MassServo](INFO): Powering down
2012-09-19T15:18:40.339Z,1348067920.339 [CBIT](INFO): Clearing failed state for component MassServo
2012-09-19T15:18:40.339Z,1348067920.339 [MassServo] No Fault, FailCount= 0
2012-09-19T15:18:40.731Z,1348067920.731 [MassServo](DEBUG): Initializing EZServoServo.
2012-09-19T15:18:40.851Z,1348067920.851 [MassServo](DEBUG): Initialization error opening port: port not yet opened
2012-09-19T15:18:40.852Z,1348067920.852 [MassServo](DEBUG): Initializing MassServo.
2012-09-19T15:18:41.470Z,1348067921.470 [PAR_Licor](ERROR): PAR reading out of range: -0.007947 uMol/s/m2
2012-09-19T15:18:42.763Z,1348067922.763 [PAR_Licor](ERROR): PAR reading out of range: -0.038148 uMol/s/m2
2012-09-19T15:18:44.486Z,1348067924.486 [MassServo](FAULT): Overload Error
2012-09-19T15:18:44.487Z,1348067924.487 [MassServo] Hardware Fault, FailCount= 1
2012-09-19T15:18:44.487Z,1348067924.487 [MassServo](ERROR): Hardware Fault
2012-09-19T15:18:44.510Z,1348067924.510 [CBIT](ERROR): Hardware Fault in component: MassServo
2012-09-19T15:18:44.655Z,1348067924.655 [MassServo](DEBUG): Uninitialize Mass Servo.
2012-09-19T15:18:44.655Z,1348067924.655 [MassServo](INFO): Powering down
2012-09-19T15:18:44.659Z,1348067924.658 [CBIT](INFO): Clearing failed state for component MassServo
2012-09-19T15:18:44.659Z,1348067924.659 [MassServo] No Fault, FailCount= 0
2012-09-19T15:18:45.055Z,1348067925.055 [MassServo](DEBUG): Initializing EZServoServo.
2012-09-19T15:18:45.179Z,1348067925.179 [MassServo](DEBUG): Initialization error opening port: port not yet opened
2012-09-19T15:18:45.180Z,1348067925.180 [MassServo](DEBUG): Initializing MassServo.
2012-09-19T15:18:48.802Z,1348067928.802 [MassServo](FAULT): Overload Error
2012-09-19T15:18:48.803Z,1348067928.803 [MassServo] Hardware Fault, FailCount= 1
2012-09-19T15:18:48.803Z,1348067928.803 [MassServo](ERROR): Hardware Fault
2012-09-19T15:18:48.826Z,1348067928.826 [CBIT](ERROR): Hardware Fault in component: MassServo
2012-09-19T15:18:49.067Z,1348067929.067 [MassServo](DEBUG): Uninitialize Mass Servo.
2012-09-19T15:18:49.067Z,1348067929.067 [MassServo](INFO): Powering down
2012-09-19T15:18:49.071Z,1348067929.071 [CBIT](INFO): Clearing failed state for component MassServo
2012-09-19T15:18:49.071Z,1348067929.071 [MassServo] No Fault, FailCount= 0
2012-09-19T15:18:49.435Z,1348067929.435 [MassServo](DEBUG): Initializing EZServoServo.
2012-09-19T15:18:49.555Z,1348067929.556 [MassServo](DEBUG): Initialization error opening port: port not yet opened
2012-09-19T15:18:49.556Z,1348067929.556 [MassServo](DEBUG): Initializing MassServo.
2012-09-19T15:18:53.294Z,1348067933.295 [MassServo](FAULT): Overload Error
2012-09-19T15:18:53.295Z,1348067933.295 [MassServo] Hardware Fault, FailCount= 1
2012-09-19T15:18:53.295Z,1348067933.295 [MassServo](ERROR): Hardware Fault
2012-09-19T15:18:53.318Z,1348067933.318 [CBIT](ERROR): Hardware Fault in component: MassServo
2012-09-19T15:18:53.707Z,1348067933.707 [MassServo](DEBUG): Uninitialize Mass Servo.
2012-09-19T15:18:53.707Z,1348067933.707 [MassServo](INFO): Powering down
2012-09-19T15:18:53.711Z,1348067933.711 [CBIT](INFO): Clearing failed state for component MassServo
2012-09-19T15:18:53.711Z,1348067933.711 [MassServo] No Fault, FailCount= 0
2012-09-19T15:18:54.075Z,1348067934.075 [MassServo](DEBUG): Initializing EZServoServo.
2012-09-19T15:18:54.196Z,1348067934.195 [MassServo](DEBUG): Initialization error opening port: port not yet opened
2012-09-19T15:18:54.196Z,1348067934.196 [MassServo](DEBUG): Initializing MassServo.
2012-09-19T15:18:58.379Z,1348067938.378 [MassServo](FAULT): Overload Error
2012-09-19T15:18:58.379Z,1348067938.379 [MassServo] Hardware Fault, FailCount= 1
2012-09-19T15:18:58.379Z,1348067938.379 [MassServo](ERROR): Hardware Fault
2012-09-19T15:18:58.402Z,1348067938.402 [CBIT](ERROR): Hardware Fault in component: MassServo
2012-09-19T15:18:58.751Z,1348067938.751 [MassServo](DEBUG): Uninitialize Mass Servo.
2012-09-19T15:18:58.751Z,1348067938.751 [MassServo](INFO): Powering down
2012-09-19T15:18:58.754Z,1348067938.754 [CBIT](INFO): Clearing failed state for component MassServo
2012-09-19T15:18:58.754Z,1348067938.754 [MassServo] No Fault, FailCount= 0
2012-09-19T15:18:59.147Z,1348067939.147 [MassServo](DEBUG): Initializing EZServoServo.
2012-09-19T15:18:59.267Z,1348067939.267 [MassServo](DEBUG): Initialization error opening port: port not yet opened
2012-09-19T15:18:59.268Z,1348067939.268 [MassServo](DEBUG): Initializing MassServo.
2012-09-19T15:18:59.934Z,1348067939.934 [PAR_Licor](ERROR): PAR reading out of range: -0.012716 uMol/s/m2
2012-09-19T15:19:01.410Z,1348067941.410 [PAR_Licor](ERROR): PAR reading out of range: -0.031790 uMol/s/m2
2012-09-19T15:19:02.169Z,1348067942.169 [PAR_Licor](ERROR): PAR reading out of range: -0.004768 uMol/s/m2
2012-09-19T15:19:03.023Z,1348067943.023 [MassServo](FAULT): Overload Error
2012-09-19T15:19:03.023Z,1348067943.023 [MassServo] Hardware Fault, FailCount= 1
2012-09-19T15:19:03.023Z,1348067943.023 [MassServo](ERROR): Hardware Fault
2012-09-19T15:19:03.046Z,1348067943.046 [CBIT](ERROR): Hardware Fault in component: MassServo
2012-09-19T15:19:03.403Z,1348067943.403 [MassServo](DEBUG): Uninitialize Mass Servo.
2012-09-19T15:19:03.403Z,1348067943.403 [MassServo](INFO): Powering down
2012-09-19T15:19:03.407Z,1348067943.407 [CBIT](INFO): Clearing failed state for component MassServo
2012-09-19T15:19:03.407Z,1348067943.407 [MassServo] No Fault, FailCount= 0
2012-09-19T15:19:03.807Z,1348067943.807 [MassServo](DEBUG): Initializing EZServoServo.
2012-09-19T15:19:03.928Z,1348067943.928 [MassServo](DEBUG): Initialization error opening port: port not yet opened
2012-09-19T15:19:03.928Z,1348067943.928 [MassServo](DEBUG): Initializing MassServo.
2012-09-19T15:19:05.221Z,1348067945.220 [PAR_Licor](ERROR): PAR reading out of range: -0.001589 uMol/s/m2
2012-09-19T15:19:08.147Z,1348067948.147 [MassServo](FAULT): Overload Error
2012-09-19T15:19:08.147Z,1348067948.147 [MassServo] Hardware Fault, FailCount= 1
2012-09-19T15:19:08.147Z,1348067948.147 [MassServo](ERROR): Hardware Fault
2012-09-19T15:19:08.170Z,1348067948.170 [CBIT](ERROR): Hardware Fault in component: MassServo
2012-09-19T15:19:08.983Z,1348067948.983 [MassServo](DEBUG): Uninitialize Mass Servo.
2012-09-19T15:19:08.983Z,1348067948.983 [MassServo](INFO): Powering down
2012-09-19T15:19:08.987Z,1348067948.987 [CBIT](INFO): Clearing failed state for component MassServo
2012-09-19T15:19:08.987Z,1348067948.987 [MassServo] No Fault, FailCount= 0
2012-09-19T15:19:09.127Z,1348067949.127 [MassServo](DEBUG): Initializing EZServoServo.
2012-09-19T15:19:09.247Z,1348067949.247 [MassServo](DEBUG): Initialization error opening port: port not yet opened
2012-09-19T15:19:09.248Z,1348067949.248 [MassServo](DEBUG): Initializing MassServo.
2012-09-19T15:19:12.874Z,1348067952.874 [MassServo](FAULT): Overload Error
2012-09-19T15:19:12.874Z,1348067952.875 [MassServo] Hardware Fault, FailCount= 1
2012-09-19T15:19:12.874Z,1348067952.875 [MassServo](ERROR): Hardware Fault
2012-09-19T15:19:12.878Z,1348067952.878 [CBIT](ERROR): Hardware Fault in component: MassServo
2012-09-19T15:19:13.027Z,1348067953.027 [MassServo](DEBUG): Uninitialize Mass Servo.
2012-09-19T15:19:13.027Z,1348067953.027 [MassServo](INFO): Powering down
2012-09-19T15:19:13.031Z,1348067953.031 [CBIT](INFO): Clearing failed state for component MassServo
2012-09-19T15:19:13.031Z,1348067953.031 [MassServo] No Fault, FailCount= 0
2012-09-19T15:19:13.416Z,1348067953.416 [MassServo](DEBUG): Initializing EZServoServo.
2012-09-19T15:19:13.538Z,1348067953.538 [MassServo](DEBUG): Initialization error opening port: port not yet opened
2012-09-19T15:19:13.538Z,1348067953.538 [MassServo](DEBUG): Initializing MassServo.
2012-09-19T15:19:17.166Z,1348067957.166 [MassServo](FAULT): Overload Error
2012-09-19T15:19:17.167Z,1348067957.167 [MassServo] Hardware Fault, FailCount= 1
2012-09-19T15:19:17.167Z,1348067957.167 [MassServo](ERROR): Hardware Fault
2012-09-19T15:19:17.170Z,1348067957.170 [CBIT](ERROR): Hardware Fault in component: MassServo
2012-09-19T15:19:17.315Z,1348067957.315 [MassServo](DEBUG): Uninitialize Mass Servo.
2012-09-19T15:19:17.315Z,1348067957.316 [MassServo](INFO): Powering down
2012-09-19T15:19:17.319Z,1348067957.319 [CBIT](INFO): Clearing failed state for component MassServo
2012-09-19T15:19:17.319Z,1348067957.319 [MassServo] No Fault, FailCount= 0
2012-09-19T15:19:17.715Z,1348067957.715 [MassServo](DEBUG): Initializing EZServoServo.
2012-09-19T15:19:17.844Z,1348067957.844 [MassServo](DEBUG): Initialization error opening port: port not yet opened
2012-09-19T15:19:17.844Z,1348067957.844 [MassServo](DEBUG): Initializing MassServo.
2012-09-19T15:19:21.164Z,1348067961.164 [PAR_Licor](ERROR): PAR reading out of range: -0.004768 uMol/s/m2
2012-09-19T15:19:21.646Z,1348067961.647 [MassServo](FAULT): Overload Error
2012-09-19T15:19:21.647Z,1348067961.647 [MassServo] Hardware Fault, FailCount= 1
2012-09-19T15:19:21.647Z,1348067961.647 [MassServo](ERROR): Hardware Fault
2012-09-19T15:19:21.670Z,1348067961.670 [CBIT](ERROR): Hardware Fault in component: MassServo
2012-09-19T15:19:22.023Z,1348067962.023 [MassServo](DEBUG): Uninitialize Mass Servo.
2012-09-19T15:19:22.023Z,1348067962.023 [MassServo](INFO): Powering down
2012-09-19T15:19:22.027Z,1348067962.027 [CBIT](INFO): Clearing failed state for component MassServo
2012-09-19T15:19:22.027Z,1348067962.027 [MassServo] No Fault, FailCount= 0
2012-09-19T15:19:22.424Z,1348067962.424 [MassServo](DEBUG): Initializing EZServoServo.
2012-09-19T15:19:22.544Z,1348067962.544 [MassServo](DEBUG): Initialization error opening port: port not yet opened
2012-09-19T15:19:22.544Z,1348067962.544 [MassServo](DEBUG): Initializing MassServo.
2012-09-19T15:19:25.913Z,1348067965.913 [PAR_Licor](ERROR): PAR reading out of range: -0.001589 uMol/s/m2
2012-09-19T15:19:26.762Z,1348067966.762 [MassServo](FAULT): Overload Error
2012-09-19T15:19:26.763Z,1348067966.763 [MassServo] Hardware Fault, FailCount= 1
2012-09-19T15:19:26.763Z,1348067966.763 [MassServo](ERROR): Hardware Fault
2012-09-19T15:19:26.786Z,1348067966.786 [CBIT](ERROR): Hardware Fault in component: MassServo
2012-09-19T15:19:27.143Z,1348067967.143 [MassServo](DEBUG): Uninitialize Mass Servo.
2012-09-19T15:19:27.143Z,1348067967.143 [MassServo](INFO): Powering down
2012-09-19T15:19:27.147Z,1348067967.147 [CBIT](INFO): Clearing failed state for component MassServo
2012-09-19T15:19:27.147Z,1348067967.147 [MassServo] No Fault, FailCount= 0
2012-09-19T15:19:27.543Z,1348067967.543 [MassServo](DEBUG): Initializing EZServoServo.
2012-09-19T15:19:27.663Z,1348067967.663 [MassServo](DEBUG): Initialization error opening port: port not yet opened
2012-09-19T15:19:27.664Z,1348067967.664 [MassServo](DEBUG): Initializing MassServo.
2012-09-19T15:19:31.947Z,1348067971.947 [MassServo](FAULT): Overload Error
2012-09-19T15:19:31.947Z,1348067971.947 [MassServo] Hardware Fault, FailCount= 1
2012-09-19T15:19:31.947Z,1348067971.947 [MassServo](ERROR): Hardware Fault
2012-09-19T15:19:31.989Z,1348067971.989 [CBIT](ERROR): Hardware Fault in component: MassServo
2012-09-19T15:19:32.327Z,1348067972.327 [MassServo](DEBUG): Uninitialize Mass Servo.
2012-09-19T15:19:32.327Z,1348067972.327 [MassServo](INFO): Powering down
2012-09-19T15:19:32.331Z,1348067972.330 [CBIT](INFO): Clearing failed state for component MassServo
2012-09-19T15:19:32.331Z,1348067972.331 [MassServo] No Fault, FailCount= 0
2012-09-19T15:19:32.735Z,1348067972.735 [MassServo](DEBUG): Initializing EZServoServo.
2012-09-19T15:19:32.852Z,1348067972.852 [MassServo](DEBUG): Initialization error opening port: port not yet opened
2012-09-19T15:19:32.852Z,1348067972.852 [MassServo](DEBUG): Initializing MassServo.
2012-09-19T15:19:36.687Z,1348067976.687 [MassServo](FAULT): Overload Error
2012-09-19T15:19:36.687Z,1348067976.687 [MassServo] Hardware Fault, FailCount= 1
2012-09-19T15:19:36.687Z,1348067976.687 [MassServo](ERROR): Hardware Fault
2012-09-19T15:19:36.710Z,1348067976.710 [CBIT](ERROR): Hardware Fault in component: MassServo
2012-09-19T15:19:37.059Z,1348067977.059 [MassServo](DEBUG): Uninitialize Mass Servo.
2012-09-19T15:19:37.059Z,1348067977.059 [MassServo](INFO): Powering down
2012-09-19T15:19:37.063Z,1348067977.063 [CBIT](INFO): Clearing failed state for component MassServo
2012-09-19T15:19:37.063Z,1348067977.063 [MassServo] No Fault, FailCount= 0
2012-09-19T15:19:37.407Z,1348067977.407 [MassServo](DEBUG): Initializing EZServoServo.
2012-09-19T15:19:37.527Z,1348067977.527 [MassServo](DEBUG): Initialization error opening port: port not yet opened
2012-09-19T15:19:37.527Z,1348067977.527 [MassServo](DEBUG): Initializing MassServo.
2012-09-19T15:19:42.115Z,1348067982.115 [MassServo](FAULT): Overload Error
2012-09-19T15:19:42.115Z,1348067982.115 [MassServo] Hardware Fault, FailCount= 1
2012-09-19T15:19:42.115Z,1348067982.115 [MassServo](ERROR): Hardware Fault
2012-09-19T15:19:42.138Z,1348067982.138 [CBIT](ERROR): Hardware Fault in component: MassServo
2012-09-19T15:19:43.003Z,1348067983.003 [MassServo](DEBUG): Uninitialize Mass Servo.
2012-09-19T15:19:43.003Z,1348067983.003 [MassServo](INFO): Powering down
2012-09-19T15:19:43.007Z,1348067983.007 [CBIT](INFO): Clearing failed state for component MassServo
2012-09-19T15:19:43.007Z,1348067983.007 [MassServo] No Fault, FailCount= 0
2012-09-19T15:19:43.147Z,1348067983.147 [MassServo](DEBUG): Initializing EZServoServo.
2012-09-19T15:19:43.267Z,1348067983.267 [MassServo](DEBUG): Initialization error opening port: port not yet opened
2012-09-19T15:19:43.268Z,1348067983.267 [MassServo](DEBUG): Initializing MassServo.
2012-09-19T15:19:46.894Z,1348067986.894 [MassServo](FAULT): Overload Error
2012-09-19T15:19:46.894Z,1348067986.894 [MassServo] Hardware Fault, FailCount= 1
2012-09-19T15:19:46.895Z,1348067986.895 [MassServo](ERROR): Hardware Fault
2012-09-19T15:19:46.898Z,1348067986.898 [CBIT](ERROR): Hardware Fault in component: MassServo
2012-09-19T15:19:47.051Z,1348067987.051 [MassServo](DEBUG): Uninitialize Mass Servo.
2012-09-19T15:19:47.051Z,1348067987.051 [MassServo](INFO): Powering down
2012-09-19T15:19:47.055Z,1348067987.055 [CBIT](INFO): Clearing failed state for component MassServo
2012-09-19T15:19:47.055Z,1348067987.055 [MassServo] No Fault, FailCount= 0
2012-09-19T15:19:47.447Z,1348067987.447 [MassServo](DEBUG): Initializing EZServoServo.
2012-09-19T15:19:47.567Z,1348067987.567 [MassServo](DEBUG): Initialization error opening port: port not yet opened
2012-09-19T15:19:47.567Z,1348067987.567 [MassServo](DEBUG): Initializing MassServo.
2012-09-19T15:19:47.786Z,1348067987.786 [PAR_Licor](ERROR): PAR reading out of range: 0.000000 uMol/s/m2
2012-09-19T15:19:51.095Z,1348067991.095 [PAR_Licor](ERROR): PAR reading out of range: -0.020663 uMol/s/m2
2012-09-19T15:19:51.207Z,1348067991.207 [MassServo](FAULT): Overload Error
2012-09-19T15:19:51.207Z,1348067991.207 [MassServo] Hardware Fault, FailCount= 1
2012-09-19T15:19:51.207Z,1348067991.207 [MassServo](ERROR): Hardware Fault
2012-09-19T15:19:51.214Z,1348067991.214 [CBIT](ERROR): Hardware Fault in component: MassServo
2012-09-19T15:19:51.383Z,1348067991.383 [MassServo](DEBUG): Uninitialize Mass Servo.
2012-09-19T15:19:51.383Z,1348067991.383 [MassServo](INFO): Powering down
2012-09-19T15:19:51.387Z,1348067991.386 [CBIT](INFO): Clearing failed state for component MassServo
2012-09-19T15:19:51.387Z,1348067991.387 [MassServo] No Fault, FailCount= 0
2012-09-19T15:19:51.783Z,1348067991.783 [MassServo](DEBUG): Initializing EZServoServo.
2012-09-19T15:19:51.904Z,1348067991.904 [MassServo](DEBUG): Initialization error opening port: port not yet opened
2012-09-19T15:19:51.904Z,1348067991.904 [MassServo](DEBUG): Initializing MassServo.
2012-09-19T15:19:52.519Z,1348067992.519 [PAR_Licor](ERROR): PAR reading out of range: -0.007947 uMol/s/m2
2012-09-19T15:19:55.970Z,1348067995.970 [MassServo](FAULT): Overload Error
2012-09-19T15:19:55.970Z,1348067995.970 [MassServo] Hardware Fault, FailCount= 1
2012-09-19T15:19:55.971Z,1348067995.971 [MassServo](ERROR): Hardware Fault
2012-09-19T15:19:55.994Z,1348067995.994 [CBIT](ERROR): Hardware Fault in component: MassServo
2012-09-19T15:19:56.135Z,1348067996.135 [MassServo](DEBUG): Uninitialize Mass Servo.
2012-09-19T15:19:56.135Z,1348067996.135 [MassServo](INFO): Powering down
2012-09-19T15:19:56.139Z,1348067996.139 [CBIT](INFO): Clearing failed state for component MassServo
2012-09-19T15:19:56.139Z,1348067996.139 [MassServo] No Fault, FailCount= 0
2012-09-19T15:19:56.531Z,1348067996.531 [MassServo](DEBUG): Initializing EZServoServo.
2012-09-19T15:19:56.664Z,1348067996.664 [MassServo](DEBUG): Initialization error opening port: port not yet opened
2012-09-19T15:19:56.664Z,1348067996.664 [MassServo](DEBUG): Initializing MassServo.
2012-09-19T15:20:00.278Z,1348068000.278 [MassServo](FAULT): Overload Error
2012-09-19T15:20:00.278Z,1348068000.279 [MassServo] Hardware Fault, FailCount= 1
2012-09-19T15:20:00.278Z,1348068000.279 [MassServo](ERROR): Hardware Fault
2012-09-19T15:20:00.282Z,1348068000.282 [CBIT](ERROR): Hardware Fault in component: MassServo
2012-09-19T15:20:00.471Z,1348068000.471 [MassServo](DEBUG): Uninitialize Mass Servo.
2012-09-19T15:20:00.471Z,1348068000.471 [MassServo](INFO): Powering down
2012-09-19T15:20:00.475Z,1348068000.475 [CBIT](INFO): Clearing failed state for component MassServo
2012-09-19T15:20:00.475Z,1348068000.475 [MassServo] No Fault, FailCount= 0
2012-09-19T15:20:00.847Z,1348068000.847 [MassServo](DEBUG): Initializing EZServoServo.
2012-09-19T15:20:00.967Z,1348068000.967 [MassServo](DEBUG): Initialization error opening port: port not yet opened
2012-09-19T15:20:00.968Z,1348068000.968 [MassServo](DEBUG): Initializing MassServo.
2012-09-19T15:20:04.942Z,1348068004.942 [MassServo](FAULT): Overload Error
2012-09-19T15:20:04.943Z,1348068004.943 [MassServo] Hardware Fault, FailCount= 1
2012-09-19T15:20:04.943Z,1348068004.943 [MassServo](ERROR): Hardware Fault
2012-09-19T15:20:04.966Z,1348068004.966 [CBIT](ERROR): Hardware Fault in component: MassServo
2012-09-19T15:20:05.103Z,1348068005.103 [MassServo](DEBUG): Uninitialize Mass Servo.
2012-09-19T15:20:05.104Z,1348068005.103 [MassServo](INFO): Powering down
2012-09-19T15:20:05.108Z,1348068005.108 [CBIT](INFO): Clearing failed state for component MassServo
2012-09-19T15:20:05.108Z,1348068005.108 [MassServo] No Fault, FailCount= 0
2012-09-19T15:20:05.503Z,1348068005.503 [MassServo](DEBUG): Initializing EZServoServo.
2012-09-19T15:20:05.623Z,1348068005.623 [MassServo](DEBUG): Initialization error opening port: port not yet opened
2012-09-19T15:20:05.623Z,1348068005.624 [MassServo](DEBUG): Initializing MassServo.
2012-09-19T15:20:07.882Z,1348068007.882 [PAR_Licor](ERROR): PAR reading out of range: -0.009537 uMol/s/m2
2012-09-19T15:20:09.403Z,1348068009.403 [MassServo](FAULT): Overload Error
2012-09-19T15:20:09.403Z,1348068009.403 [MassServo] Hardware Fault, FailCount= 1
2012-09-19T15:20:09.403Z,1348068009.403 [MassServo](ERROR): Hardware Fault
2012-09-19T15:20:09.426Z,1348068009.426 [CBIT](ERROR): Hardware Fault in component: MassServo
2012-09-19T15:20:09.780Z,1348068009.780 [MassServo](DEBUG): Uninitialize Mass Servo.
2012-09-19T15:20:09.780Z,1348068009.780 [MassServo](INFO): Powering down
2012-09-19T15:20:09.784Z,1348068009.784 [CBIT](INFO): Clearing failed state for component MassServo
2012-09-19T15:20:09.784Z,1348068009.784 [MassServo] No Fault, FailCount= 0
2012-09-19T15:20:10.211Z,1348068010.211 [MassServo](DEBUG): Initializing EZServoServo.
2012-09-19T15:20:10.331Z,1348068010.332 [MassServo](DEBUG): Initialization error opening port: port not yet opened
2012-09-19T15:20:10.332Z,1348068010.332 [MassServo](DEBUG): Initializing MassServo.
2012-09-19T15:20:10.521Z,1348068010.521 [PAR_Licor](ERROR): PAR reading out of range: -0.009537 uMol/s/m2
2012-09-19T15:20:12.162Z,1348068012.162 [PAR_Licor](ERROR): PAR reading out of range: -0.001589 uMol/s/m2
2012-09-19T15:20:14.091Z,1348068014.091 [MassServo](FAULT): Overload Error
2012-09-19T15:20:14.091Z,1348068014.091 [MassServo] Hardware Fault, FailCount= 1
2012-09-19T15:20:14.091Z,1348068014.091 [MassServo](ERROR): Hardware Fault
2012-09-19T15:20:14.115Z,1348068014.115 [CBIT](ERROR): Hardware Fault in component: MassServo
2012-09-19T15:20:14.425Z,1348068014.425 [PAR_Licor](ERROR): PAR reading out of range: -0.007947 uMol/s/m2
2012-09-19T15:20:14.499Z,1348068014.499 [MassServo](DEBUG): Uninitialize Mass Servo.
2012-09-19T15:20:14.499Z,1348068014.499 [MassServo](INFO): Powering down
2012-09-19T15:20:14.502Z,1348068014.503 [CBIT](INFO): Clearing failed state for component MassServo
2012-09-19T15:20:14.503Z,1348068014.503 [MassServo] No Fault, FailCount= 0
2012-09-19T15:20:14.855Z,1348068014.855 [MassServo](DEBUG): Initializing EZServoServo.
2012-09-19T15:20:14.975Z,1348068014.975 [MassServo](DEBUG): Initialization error opening port: port not yet opened
2012-09-19T15:20:14.975Z,1348068014.975 [MassServo](DEBUG): Initializing MassServo.
2012-09-19T15:20:18.751Z,1348068018.751 [MassServo](FAULT): Overload Error
2012-09-19T15:20:18.751Z,1348068018.751 [MassServo] Hardware Fault, FailCount= 1
2012-09-19T15:20:18.751Z,1348068018.751 [MassServo](ERROR): Hardware Fault
2012-09-19T15:20:18.774Z,1348068018.774 [CBIT](ERROR): Hardware Fault in component: MassServo
2012-09-19T15:20:19.159Z,1348068019.159 [MassServo](DEBUG): Uninitialize Mass Servo.
2012-09-19T15:20:19.159Z,1348068019.159 [MassServo](INFO): Powering down
2012-09-19T15:20:19.163Z,1348068019.163 [CBIT](INFO): Clearing failed state for component MassServo
2012-09-19T15:20:19.163Z,1348068019.163 [MassServo] No Fault, FailCount= 0
2012-09-19T15:20:19.559Z,1348068019.559 [MassServo](DEBUG): Initializing EZServoServo.
2012-09-19T15:20:19.679Z,1348068019.679 [MassServo](DEBUG): Initialization error opening port: port not yet opened
2012-09-19T15:20:19.679Z,1348068019.680 [MassServo](DEBUG): Initializing MassServo.
2012-09-19T15:20:22.808Z,1348068022.808 [PAR_Licor](ERROR): PAR reading out of range: -0.058811 uMol/s/m2
2012-09-19T15:20:23.454Z,1348068023.454 [MassServo](FAULT): Overload Error
2012-09-19T15:20:23.455Z,1348068023.455 [MassServo] Hardware Fault, FailCount= 1
2012-09-19T15:20:23.455Z,1348068023.455 [MassServo](ERROR): Hardware Fault
2012-09-19T15:20:23.494Z,1348068023.494 [CBIT](ERROR): Hardware Fault in component: MassServo
2012-09-19T15:20:23.839Z,1348068023.839 [MassServo](DEBUG): Uninitialize Mass Servo.
2012-09-19T15:20:23.839Z,1348068023.839 [MassServo](INFO): Powering down
2012-09-19T15:20:23.842Z,1348068023.842 [CBIT](INFO): Clearing failed state for component MassServo
2012-09-19T15:20:23.842Z,1348068023.842 [MassServo] No Fault, FailCount= 0
2012-09-19T15:20:24.235Z,1348068024.235 [MassServo](DEBUG): Initializing EZServoServo.
2012-09-19T15:20:24.356Z,1348068024.355 [MassServo](DEBUG): Initialization error opening port: port not yet opened
2012-09-19T15:20:24.356Z,1348068024.356 [MassServo](DEBUG): Initializing MassServo.
2012-09-19T15:20:28.053Z,1348068028.053 [PAR_Licor](ERROR): PAR reading out of range: -0.014305 uMol/s/m2
2012-09-19T15:20:28.535Z,1348068028.535 [MassServo](FAULT): Overload Error
2012-09-19T15:20:28.535Z,1348068028.535 [MassServo] Hardware Fault, FailCount= 1
2012-09-19T15:20:28.535Z,1348068028.535 [MassServo](ERROR): Hardware Fault
2012-09-19T15:20:28.558Z,1348068028.558 [CBIT](ERROR): Hardware Fault in component: MassServo
2012-09-19T15:20:28.915Z,1348068028.915 [MassServo](DEBUG): Uninitialize Mass Servo.
2012-09-19T15:20:28.915Z,1348068028.915 [MassServo](INFO): Powering down
2012-09-19T15:20:28.919Z,1348068028.919 [CBIT](INFO): Clearing failed state for component MassServo
2012-09-19T15:20:28.919Z,1348068028.919 [MassServo] No Fault, FailCount= 0
2012-09-19T15:20:29.311Z,1348068029.311 [MassServo](DEBUG): Initializing EZServoServo.
2012-09-19T15:20:29.431Z,1348068029.431 [MassServo](DEBUG): Initialization error opening port: port not yet opened
2012-09-19T15:20:29.431Z,1348068029.431 [MassServo](DEBUG): Initializing MassServo.
2012-09-19T15:20:29.652Z,1348068029.652 [PAR_Licor](ERROR): PAR reading out of range: 0.000000 uMol/s/m2
2012-09-19T15:20:33.590Z,1348068033.591 [MassServo](FAULT): Overload Error
2012-09-19T15:20:33.591Z,1348068033.591 [MassServo] Hardware Fault, FailCount= 1
2012-09-19T15:20:33.591Z,1348068033.591 [MassServo](ERROR): Hardware Fault
2012-09-19T15:20:33.614Z,1348068033.614 [CBIT](ERROR): Hardware Fault in component: MassServo
2012-09-19T15:20:33.983Z,1348068033.983 [MassServo](DEBUG): Uninitialize Mass Servo.
2012-09-19T15:20:33.983Z,1348068033.983 [MassServo](INFO): Powering down
2012-09-19T15:20:33.987Z,1348068033.987 [CBIT](INFO): Clearing failed state for component MassServo
2012-09-19T15:20:33.987Z,1348068033.987 [MassServo] No Fault, FailCount= 0
2012-09-19T15:20:34.447Z,1348068034.447 [MassServo](DEBUG): Initializing EZServoServo.
2012-09-19T15:20:34.567Z,1348068034.568 [MassServo](DEBUG): Initialization error opening port: port not yet opened
2012-09-19T15:20:34.568Z,1348068034.568 [MassServo](DEBUG): Initializing MassServo.
2012-09-19T15:20:36.273Z,1348068036.273 [PAR_Licor](ERROR): PAR reading out of range: -0.034969 uMol/s/m2
2012-09-19T15:20:37.871Z,1348068037.871 [PAR_Licor](ERROR): PAR reading out of range: -0.012716 uMol/s/m2
2012-09-19T15:20:37.963Z,1348068037.963 [MassServo](FAULT): Overload Error
2012-09-19T15:20:37.964Z,1348068037.964 [MassServo] Hardware Fault, FailCount= 1
2012-09-19T15:20:37.964Z,1348068037.964 [MassServo](ERROR): Hardware Fault
2012-09-19T15:20:37.986Z,1348068037.986 [CBIT](ERROR): Hardware Fault in component: MassServo
2012-09-19T15:20:38.355Z,1348068038.355 [MassServo](DEBUG): Uninitialize Mass Servo.
2012-09-19T15:20:38.355Z,1348068038.355 [MassServo](INFO): Powering down
2012-09-19T15:20:38.359Z,1348068038.359 [CBIT](INFO): Clearing failed state for component MassServo
2012-09-19T15:20:38.359Z,1348068038.359 [MassServo] No Fault, FailCount= 0
2012-09-19T15:20:38.747Z,1348068038.747 [MassServo](DEBUG): Initializing EZServoServo.
2012-09-19T15:20:38.871Z,1348068038.871 [MassServo](DEBUG): Initialization error opening port: port not yet opened
2012-09-19T15:20:38.871Z,1348068038.871 [MassServo](DEBUG): Initializing MassServo.
2012-09-19T15:20:42.650Z,1348068042.651 [MassServo](FAULT): Overload Error
2012-09-19T15:20:42.651Z,1348068042.651 [MassServo] Hardware Fault, FailCount= 1
2012-09-19T15:20:42.651Z,1348068042.651 [MassServo](ERROR): Hardware Fault
2012-09-19T15:20:42.674Z,1348068042.674 [CBIT](ERROR): Hardware Fault in component: MassServo
2012-09-19T15:20:42.972Z,1348068042.972 [MassServo](DEBUG): Uninitialize Mass Servo.
2012-09-19T15:20:42.972Z,1348068042.972 [MassServo](INFO): Powering down
2012-09-19T15:20:42.975Z,1348068042.975 [CBIT](INFO): Clearing failed state for component MassServo
2012-09-19T15:20:42.975Z,1348068042.975 [MassServo] No Fault, FailCount= 0
2012-09-19T15:20:43.371Z,1348068043.371 [MassServo](DEBUG): Initializing EZServoServo.
2012-09-19T15:20:43.503Z,1348068043.503 [MassServo](DEBUG): Initialization error opening port: port not yet opened
2012-09-19T15:20:43.503Z,1348068043.503 [MassServo](DEBUG): Initializing MassServo.
2012-09-19T15:20:47.250Z,1348068047.250 [MassServo](FAULT): Overload Error
2012-09-19T15:20:47.251Z,1348068047.251 [MassServo] Hardware Fault, FailCount= 1
2012-09-19T15:20:47.251Z,1348068047.251 [MassServo](ERROR): Hardware Fault
2012-09-19T15:20:47.274Z,1348068047.274 [CBIT](ERROR): Hardware Fault in component: MassServo
2012-09-19T15:20:47.631Z,1348068047.631 [MassServo](DEBUG): Uninitialize Mass Servo.
2012-09-19T15:20:47.631Z,1348068047.631 [MassServo](INFO): Powering down
2012-09-19T15:20:47.634Z,1348068047.634 [CBIT](INFO): Clearing failed state for component MassServo
2012-09-19T15:20:47.635Z,1348068047.635 [MassServo] No Fault, FailCount= 0
2012-09-19T15:20:48.531Z,1348068048.531 [MassServo](DEBUG): Initializing EZServoServo.
2012-09-19T15:20:48.651Z,1348068048.651 [MassServo](DEBUG): Initialization error opening port: port not yet opened
2012-09-19T15:20:48.651Z,1348068048.651 [MassServo](DEBUG): Initializing MassServo.
2012-09-19T15:20:52.154Z,1348068052.155 [MassServo](FAULT): Overload Error
2012-09-19T15:20:52.155Z,1348068052.155 [MassServo] Hardware Fault, FailCount= 1
2012-09-19T15:20:52.155Z,1348068052.155 [MassServo](ERROR): Hardware Fault
2012-09-19T15:20:52.178Z,1348068052.178 [CBIT](ERROR): Hardware Fault in component: MassServo
2012-09-19T15:20:52.899Z,1348068052.899 [MassServo](DEBUG): Uninitialize Mass Servo.
2012-09-19T15:20:52.899Z,1348068052.899 [MassServo](INFO): Powering down
2012-09-19T15:20:52.902Z,1348068052.902 [CBIT](INFO): Clearing failed state for component MassServo
2012-09-19T15:20:52.903Z,1348068052.903 [MassServo] No Fault, FailCount= 0
2012-09-19T15:20:53.043Z,1348068053.043 [MassServo](DEBUG): Initializing EZServoServo.
2012-09-19T15:20:53.163Z,1348068053.163 [MassServo](DEBUG): Initialization error opening port: port not yet opened
2012-09-19T15:20:53.164Z,1348068053.164 [MassServo](DEBUG): Initializing MassServo.
2012-09-19T15:20:53.374Z,1348068053.374 [PAR_Licor](ERROR): PAR reading out of range: -0.007947 uMol/s/m2
2012-09-19T15:20:56.807Z,1348068056.806 [MassServo](FAULT): Overload Error
2012-09-19T15:20:56.807Z,1348068056.807 [MassServo] Hardware Fault, FailCount= 1
2012-09-19T15:20:56.807Z,1348068056.807 [MassServo](ERROR): Hardware Fault
2012-09-19T15:20:56.830Z,1348068056.830 [CBIT](ERROR): Hardware Fault in component: MassServo
2012-09-19T15:20:57.079Z,1348068057.079 [MassServo](DEBUG): Uninitialize Mass Servo.
2012-09-19T15:20:57.079Z,1348068057.079 [MassServo](INFO): Powering down
2012-09-19T15:20:57.083Z,1348068057.083 [CBIT](INFO): Clearing failed state for component MassServo
2012-09-19T15:20:57.083Z,1348068057.083 [MassServo] No Fault, FailCount= 0
2012-09-19T15:20:57.395Z,1348068057.395 [MassServo](DEBUG): Initializing EZServoServo.
2012-09-19T15:20:57.515Z,1348068057.515 [MassServo](DEBUG): Initialization error opening port: port not yet opened
2012-09-19T15:20:57.516Z,1348068057.516 [MassServo](DEBUG): Initializing MassServo.
2012-09-19T15:20:58.537Z,1348068058.537 [PAR_Licor](ERROR): PAR reading out of range: -0.007947 uMol/s/m2
2012-09-19T15:21:01.134Z,1348068061.135 [MassServo](FAULT): Overload Error
2012-09-19T15:21:01.135Z,1348068061.135 [MassServo] Hardware Fault, FailCount= 1
2012-09-19T15:21:01.135Z,1348068061.135 [MassServo](ERROR): Hardware Fault
2012-09-19T15:21:01.139Z,1348068061.139 [CBIT](ERROR): Hardware Fault in component: MassServo
2012-09-19T15:21:01.307Z,1348068061.307 [MassServo](DEBUG): Uninitialize Mass Servo.
2012-09-19T15:21:01.307Z,1348068061.307 [MassServo](INFO): Powering down
2012-09-19T15:21:01.310Z,1348068061.310 [CBIT](INFO): Clearing failed state for component MassServo
2012-09-19T15:21:01.310Z,1348068061.310 [MassServo] No Fault, FailCount= 0
2012-09-19T15:21:01.703Z,1348068061.703 [MassServo](DEBUG): Initializing EZServoServo.
2012-09-19T15:21:01.824Z,1348068061.824 [MassServo](DEBUG): Initialization error opening port: port not yet opened
2012-09-19T15:21:01.824Z,1348068061.824 [MassServo](DEBUG): Initializing MassServo.
2012-09-19T15:21:05.807Z,1348068065.806 [MassServo](FAULT): Overload Error
2012-09-19T15:21:05.807Z,1348068065.807 [MassServo] Hardware Fault, FailCount= 1
2012-09-19T15:21:05.807Z,1348068065.807 [MassServo](ERROR): Hardware Fault
2012-09-19T15:21:05.830Z,1348068065.830 [CBIT](ERROR): Hardware Fault in component: MassServo
2012-09-19T15:21:05.987Z,1348068065.987 [MassServo](DEBUG): Uninitialize Mass Servo.
2012-09-19T15:21:05.987Z,1348068065.987 [MassServo](INFO): Powering down
2012-09-19T15:21:05.990Z,1348068065.990 [CBIT](INFO): Clearing failed state for component MassServo
2012-09-19T15:21:05.990Z,1348068065.990 [MassServo] No Fault, FailCount= 0
2012-09-19T15:21:06.379Z,1348068066.379 [MassServo](DEBUG): Initializing EZServoServo.
2012-09-19T15:21:06.499Z,1348068066.499 [MassServo](DEBUG): Initialization error opening port: port not yet opened
2012-09-19T15:21:06.500Z,1348068066.500 [MassServo](DEBUG): Initializing MassServo.
2012-09-19T15:21:10.182Z,1348068070.182 [MassServo](FAULT): Overload Error
2012-09-19T15:21:10.183Z,1348068070.183 [MassServo] Hardware Fault, FailCount= 1
2012-09-19T15:21:10.183Z,1348068070.183 [MassServo](ERROR): Hardware Fault
2012-09-19T15:21:10.186Z,1348068070.186 [CBIT](ERROR): Hardware Fault in component: MassServo
2012-09-19T15:21:10.331Z,1348068070.332 [MassServo](DEBUG): Uninitialize Mass Servo.
2012-09-19T15:21:10.332Z,1348068070.332 [MassServo](INFO): Powering down
2012-09-19T15:21:10.335Z,1348068070.335 [CBIT](INFO): Clearing failed state for component MassServo
2012-09-19T15:21:10.335Z,1348068070.335 [MassServo] No Fault, FailCount= 0
2012-09-19T15:21:10.455Z,1348068070.455 [CommandLine](IMPORTANT): got command run ./Missions/Science/science_to_67_70.xml
2012-09-19T15:21:10.455Z,1348068070.455 [MissionManager](INFO): Loading Mission: ./Missions/Science/science_to_67_70.xml
2012-09-19T15:21:10.608Z,1348068070.608 [MissionManager](INFO): DefineArg science_to_67_70.MinAltitude = 10.000000 m
2012-09-19T15:21:10.615Z,1348068070.615 [MissionManager](INFO): DefineArg science_to_67_70.MaxDepth = 105.000000 m
2012-09-19T15:21:10.618Z,1348068070.618 [MissionManager](INFO): DefineArg science_to_67_70.MinOffshore = 2000.000000 m
2012-09-19T15:21:10.625Z,1348068070.625 [MissionManager](INFO): DefineArg science_to_67_70.YoYoMinDepth = 3.000000 m
2012-09-19T15:21:10.668Z,1348068070.668 [MissionManager](INFO): DefineArg science_to_67_70.YoYoMaxDepth = 100.000000 m
2012-09-19T15:21:10.675Z,1348068070.675 [MissionManager](INFO): DefineArg science_to_67_70.YoYoUpPitch = 20.000000 arcdeg
2012-09-19T15:21:10.687Z,1348068070.687 [MissionManager](INFO): DefineArg science_to_67_70.YoYoDownPitch = -15.000000 arcdeg
2012-09-19T15:21:10.690Z,1348068070.690 [MissionManager](INFO): DefineArg science_to_67_70.WptLat = 36.120000 arcdeg
2012-09-19T15:21:10.705Z,1348068070.705 [MissionManager](INFO): DefineArg science_to_67_70.WptLon = -123.486000 arcdeg
2012-09-19T15:21:10.713Z,1348068070.713 [MissionManager](INFO): DefineArg science_to_67_70.NeedCommsTime = 120.000000 min
2012-09-19T15:21:10.720Z,1348068070.720 [MissionManager](INFO): DefineArg science_to_67_70.Speed = 1.000000 m/s
2012-09-19T15:21:10.723Z,1348068070.723 [MissionManager](INFO): DefineArg science_to_67_70.Timeout = 36.000000 h
2012-09-19T15:21:10.733Z,1348068070.733 [MissionManager](INFO): DefineArg science_to_67_70.BuoyancyNeutral = 0.000330 n/a
2012-09-19T15:21:10.737Z,1348068070.737 [science_to_67_70:AltEnvWrapper:A.AltitudeEnvelope](DEBUG): Construct AltitudeEnvelope.
2012-09-19T15:21:10.747Z,1348068070.747 [science_to_67_70:AltEnvWrapper:B.Wait](DEBUG): Construct Wait.
2012-09-19T15:21:10.748Z,1348068070.748 [science_to_67_70:B.DepthEnvelope](DEBUG): Construct DepthEnvelope.
2012-09-19T15:21:10.768Z,1348068070.768 [science_to_67_70:OffshoreWrapper:A.OffshoreEnvelope](DEBUG): Construct OffshoreEnvelope.
2012-09-19T15:21:10.775Z,1348068070.775 [MassServo](DEBUG): Initializing EZServoServo.
2012-09-19T15:21:10.777Z,1348068070.777 [science_to_67_70:OffshoreWrapper:B.Wait](DEBUG): Construct Wait.
2012-09-19T15:21:10.779Z,1348068070.779 [MissionManager](INFO): Inserting Stack: Missions/Insert/Surface.xml
2012-09-19T15:21:10.804Z,1348068070.804 [MissionManager](INFO): DefineArg science_to_67_70:SURFACECOMMS.SurfaceDepthRate = nan m/s
2012-09-19T15:21:10.807Z,1348068070.807 [MissionManager](INFO): DefineArg science_to_67_70:SURFACECOMMS.SurfacePitch = nan arcdeg
2012-09-19T15:21:10.810Z,1348068070.810 [MissionManager](INFO): DefineArg science_to_67_70:SURFACECOMMS.SurfaceSpeed = 0.500000 m/s
2012-09-19T15:21:10.813Z,1348068070.813 [MissionManager](INFO): DefineArg science_to_67_70:SURFACECOMMS.IridiumTimeout = 30.000000 min
2012-09-19T15:21:10.815Z,1348068070.815 [science_to_67_70:SURFACECOMMS:A.GoToSurface](DEBUG): Construct GoToSurface.
2012-09-19T15:21:10.843Z,1348068070.843 [MissionManager](INFO): RedefineArg science_to_67_70:SURFACECOMMS.SurfacePitch = 20.000000 arcdeg
2012-09-19T15:21:10.853Z,1348068070.853 [MissionManager](INFO): Inserting Stack: Missions/Insert/Science.xml
2012-09-19T15:21:10.891Z,1348068070.891 [MassServo](DEBUG): Initialization error opening port: port not yet opened
2012-09-19T15:21:10.892Z,1348068070.892 [MassServo](DEBUG): Initializing MassServo.
2012-09-19T15:21:11.040Z,1348068071.040 [MissionManager](INFO): DefineArg science_to_67_70:Science.SampleISUS = 0 bool
2012-09-19T15:21:11.059Z,1348068071.059 [MissionManager](INFO): DefineArg science_to_67_70:Science.SampleRSSI = 1 bool
2012-09-19T15:21:11.062Z,1348068071.062 [MissionManager](INFO): DefineArg science_to_67_70:Science.SampleADCP = 1 bool
2012-09-19T15:21:11.065Z,1348068071.065 [MissionManager](INFO): DefineArg science_to_67_70:Science.PeakDetectChlActive = 0 bool
2012-09-19T15:21:11.080Z,1348068071.080 [MissionManager](INFO): DefineArg science_to_67_70:Science.PeakDetectNO3Active = 0 bool
2012-09-19T15:21:11.083Z,1348068071.083 [MissionManager](INFO): DefineArg science_to_67_70:Science.SampleAanderaaO2 = 0.000000 n/a
2012-09-19T15:21:11.103Z,1348068071.103 [MissionManager](INFO): DefineArg science_to_67_70:Science.SampleNeilBrown = 1.000000 n/a
2012-09-19T15:21:11.106Z,1348068071.106 [MissionManager](INFO): DefineArg science_to_67_70:Science.SampleTurbulence_NPS = 1.000000 n/a
2012-09-19T15:21:11.110Z,1348068071.110 [MissionManager](INFO): DefineArg science_to_67_70:Science.SampleWetLabsBB2FL = 1.000000 n/a
2012-09-19T15:21:11.129Z,1348068071.129 [MissionManager](INFO): DefineArg science_to_67_70:Science.EnabledDVL = 1.000000 n/a
2012-09-19T15:21:11.133Z,1348068071.133 [MissionManager](INFO): DefineOutput science_to_67_70:Science.PeakChl = 0.000000 ug/l
2012-09-19T15:21:11.160Z,1348068071.160 [MissionManager](INFO): DefineOutput science_to_67_70:Science.PeakChlDepth = 0.000000 m
2012-09-19T15:21:11.163Z,1348068071.163 [MissionManager](INFO): DefineOutput science_to_67_70:Science.PeakChlLatitude = nan arcdeg
2012-09-19T15:21:11.186Z,1348068071.186 [MissionManager](INFO): DefineOutput science_to_67_70:Science.PeakChlLongitude = nan arcdeg
2012-09-19T15:21:11.190Z,1348068071.190 [MissionManager](INFO): DefineOutput science_to_67_70:Science.PeakNO3 = 0.000000 umol/l
2012-09-19T15:21:11.193Z,1348068071.194 [MissionManager](INFO): DefineOutput science_to_67_70:Science.PeakNO3Depth = 0.000000 m
2012-09-19T15:21:11.197Z,1348068071.197 [MissionManager](INFO): DefineOutput science_to_67_70:Science.PeakNO3Latitude = nan arcdeg
2012-09-19T15:21:11.212Z,1348068071.212 [MissionManager](INFO): DefineOutput science_to_67_70:Science.PeakNO3Longitude = nan arcdeg
2012-09-19T15:21:11.236Z,1348068071.236 [science_to_67_70:Science:PeakDetectChl:A.PeakDetectVsDepth](DEBUG): Construct PeakDetectVsDepth.
2012-09-19T15:21:11.244Z,1348068071.244 [science_to_67_70:Science:PeakDetectNO3:A.PeakDetectVsDepth](DEBUG): Construct PeakDetectVsDepth.
2012-09-19T15:21:11.262Z,1348068071.262 [MissionManager](INFO): RedefineArg science_to_67_70:Science.SampleISUS = 1 bool
2012-09-19T15:21:11.263Z,1348068071.263 [MissionManager](INFO): RedefineArg science_to_67_70:Science.PeakDetectChlActive = 1 bool
2012-09-19T15:21:11.264Z,1348068071.264 [science_to_67_70:G.Buoyancy](DEBUG): Construct Buoyancy.
2012-09-19T15:21:11.328Z,1348068071.328 [science_to_67_70:H.SetSpeed](DEBUG): Construct.
2012-09-19T15:21:11.331Z,1348068071.331 [science_to_67_70:I.DepthEnvelope](DEBUG): Construct DepthEnvelope.
2012-09-19T15:21:11.357Z,1348068071.357 [science_to_67_70:J.YoYo](DEBUG): Construct YoYo.
2012-09-19T15:21:11.380Z,1348068071.380 [science_to_67_70:Wpt.Point](DEBUG): Construct.
2012-09-19T15:21:11.448Z,1348068071.448 [MissionManager](DEBUG): 
<?xml version="1.0" encoding="UTF-8"?>
<Mission xmlns="Tethys"
       xmlns:Control="Tethys/Control"
       xmlns:Guidance="Tethys/Guidance" 
       xmlns:Trigger="Tethys/Trigger" 
       xmlns:Units="Tethys/Units"
       xmlns:Universal="Tethys/Universal"
       xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
       xsi:schemaLocation="Tethys http://aosn.mbari.org/tethys/Xml/Tethys.xsd
                           Tethys/Control http://aosn.mbari.org/tethys/Xml/Control.xsd
                           Tethys/Guidance http://aosn.mbari.org/tethys/Xml/Guidance.xsd
                           Tethys/Trigger http://aosn.mbari.org/tethys/Xml/Trigger.xsd
                           Tethys/Units http://aosn.mbari.org/tethys/Xml/Units.xsd
                           Tethys/Universal http://aosn.mbari.org/tethys/Xml/Universal.xsd"
       Id="science_to_67_70">

    <Description>
        Vehicle yo-yo's to the specified waypoint, with science turned on.
    </Description>

    <DefineArg Name="MinAltitude"><Description>
        Minimum height above the sea floor for the entire mission.
    </Description><Units:meter/><Value>10.0</Value></DefineArg>

    <DefineArg Name="MaxDepth"><Description>
        Maximum depth for the entire mission.
    </Description><Units:meter/><Value>105.0</Value></DefineArg>

    <DefineArg Name="MinOffshore"><Description>
        Minimum offshore distance for the entire mission.
    </Description><Units:meter/><Value>2000.0</Value></DefineArg>

    <DefineArg Name="YoYoMinDepth"><Description>
        Minimum depth while performing the YoYo behavior.
    </Description><Units:meter/><Value>3.0</Value></DefineArg>

    <DefineArg Name="YoYoMaxDepth"><Description>
        Maximum depth while performing the YoYo behavior.
    </Description><Units:meter/><Value>100.0</Value></DefineArg>

    <DefineArg Name="YoYoUpPitch"><Description>
        Vehicle up pitch while performing the YoYo behavior.
    </Description><Units:degree/><Value>20.0</Value></DefineArg>

    <DefineArg Name="YoYoDownPitch"><Description>
        Vehicle down pitch while performing the YoYo behavior.
    </Description><Units:degree/><Value>-15.0</Value></DefineArg>

    <DefineArg Name="WptLat"><Description>
        Latitude of waypoint.
    </Description><Units:degree/><Value>36.120</Value></DefineArg>

    <DefineArg Name="WptLon"><Description>
        Longitude of waypoint.
    </Description><Units:degree/><Value>-123.486</Value></DefineArg>

    <DefineArg Name="NeedCommsTime"><Description>
        Elapsed time after previous surface communications when vehicle will
        begin to ascend for additional surface communications, if the vehicle
        has a positive pitch. If the vehicle has a negative pitch, it will wait
        up to 10 minutes more to begin ascent.
    </Description><Units:minute/><Value>120</Value></DefineArg>

    <DefineArg Name="Speed"><Description>
        Speed while performing the YoYo behavior.
    </Description><Units:meter_per_second/><Value>1</Value></DefineArg>

    <DefineArg Name="Timeout"><Description>
        Maximum length of mission
    </Description><Units:hour/><Value>36</Value></DefineArg>

    <DefineArg Name="BuoyancyNeutral"><Description>
        Buoyancy bladder position while performing the YoYo behavior. Defaults
        to buoyancyNeutral setting in the Config/Control.cfg file.
    </Description><Control:VerticalControl.buoyancyNeutral/></DefineArg>

    <Timeout Duration="Timeout"/>

    <Aggregate Id="AltEnvWrapper">

        <When><Arg Name="MinAltitude"/>
            <Gt><Units:meter/><Value>0</Value></Gt>
        </When>

        <Guidance:AltitudeEnvelope RunIn="Parallel">
            <Description>
                Safety behavior that keeps vehicle off sea floor
            </Description>
            <Setting><Guidance:AltitudeEnvelope.minAltitude/><Arg Name="MinAltitude"/></Setting>
        </Guidance:AltitudeEnvelope>

        <Guidance:Wait RunIn="Sequence"/>

    </Aggregate>

    <Guidance:DepthEnvelope RunIn="Parallel">
        <Description>
            Safety behavior that keeps vehicle from going too deep
        </Description>
        <Setting><Guidance:DepthEnvelope.maxDepth/><Arg Name="MaxDepth"/></Setting>
    </Guidance:DepthEnvelope>

    <Aggregate Id="OffshoreWrapper">

        <When><Arg Name="MinOffshore"/>
            <Gt><Units:meter/><Value>0</Value></Gt>
        </When>

        <Guidance:OffshoreEnvelope RunIn="Parallel">
            <Description>
                Safety behavior that keeps vehicle away from the shore
            </Description>
            <Setting><Guidance:OffshoreEnvelope.minOffshore/><Arg Name="MinOffshore"/></Setting>
        </Guidance:OffshoreEnvelope>

        <Guidance:Wait RunIn="Sequence"/>

    </Aggregate>

    <Insert Filename="Insert/Surface.xml" Id="SURFACECOMMS">
        <RedefineArg Name="SurfacePitch"><Units:degree/><Value>20</Value></RedefineArg>
    </Insert>

<!-- GPS Update.  Don't go too long w/o a GPS fix. -->

    <Aggregate Id="NeedComms">

        <When><Universal:platform_pitch_angle/>
            <Gt><Units:degree/><Value>0</Value></Gt>
            <And>
            <Elapsed><Universal:latitude_fix/></Elapsed><Gt><Arg Name="NeedCommsTime"/></Gt></And>
            <Or>
            <Elapsed><Universal:latitude_fix/></Elapsed><Gt><Arg Name="NeedCommsTime"/><Add><Units:minute/><Value>10</Value></Add></Gt></Or>
        </When>

        <Call RefId="SURFACECOMMS"/>

    </Aggregate>

    <Insert Filename="Insert/Science.xml">
        <Description>
            If we're executing here or below, lets' get science data!
        </Description>
        <RedefineArg Name="SampleISUS"><True/></RedefineArg>
        <RedefineArg Name="PeakDetectChlActive"><True/></RedefineArg>
    </Insert>

    <Guidance:Buoyancy RunIn="Parallel">
        <Setting><Guidance:Buoyancy.position /><Arg Name="BuoyancyNeutral"/></Setting>
    </Guidance:Buoyancy>

    <Guidance:SetSpeed RunIn="Parallel">
        <Setting><Guidance:SetSpeed.speed/><Arg Name="Speed"/></Setting>
    </Guidance:SetSpeed>

    <Guidance:DepthEnvelope RunIn="Parallel">
        <Setting><Guidance:DepthEnvelope.minDepth/><Arg Name="YoYoMinDepth"/></Setting>
        <Setting><Guidance:DepthEnvelope.maxDepth/><Arg Name="YoYoMaxDepth"/></Setting>
        <Setting><Guidance:DepthEnvelope.upPitch/><Arg Name="YoYoUpPitch"/></Setting>
        <Setting><Guidance:DepthEnvelope.downPitch/><Arg Name="YoYoDownPitch"/></Setting>
    </Guidance:DepthEnvelope>

    <Guidance:YoYo RunIn="Parallel">
        <Setting><Guidance:YoYo.upPitch/><Arg Name="YoYoUpPitch"/></Setting>
        <Setting><Guidance:YoYo.downPitch/><Arg Name="YoYoDownPitch"/></Setting>
    </Guidance:YoYo>

    <Guidance:Point Id="Wpt" RunIn="Sequence">
        <Setting><Guidance:Point.latitude/><Arg Name="WptLat"/></Setting>
        <Setting><Guidance:Point.longitude/><Arg Name="WptLon"/></Setting>
    </Guidance:Point>

</Mission>


2012-09-19T15:21:11.448Z,1348068071.448 [CommandLine](IMPORTANT): Running ./Missions/Science/science_to_67_70.xml
2012-09-19T15:21:11.833Z,1348068071.833 [Default] Stopped
2012-09-19T15:21:11.833Z,1348068071.833 [Default](INFO): Aggregate::uninitialize Default
2012-09-19T15:21:11.833Z,1348068071.833 [Default:GPS] Stopped
2012-09-19T15:21:11.833Z,1348068071.833 [Default:GPS](INFO): Aggregate::uninitialize Default:GPS
2012-09-19T15:21:11.833Z,1348068071.833 [Default:GPS:A.SetSpeed] Stopped
2012-09-19T15:21:11.833Z,1348068071.833 [Default:GPS:A.SetSpeed](DEBUG): Uninitialize.
2012-09-19T15:21:11.834Z,1348068071.833 [Default:GPS:Read_GPS] Stopped
2012-09-19T15:21:11.834Z,1348068071.833 [Default:Iridium] Stopped
2012-09-19T15:21:11.834Z,1348068071.834 [Default:Iridium](INFO): Aggregate::uninitialize Default:Iridium
2012-09-19T15:21:11.834Z,1348068071.834 [Default:Iridium:A.SetSpeed] Stopped
2012-09-19T15:21:11.834Z,1348068071.834 [Default:Iridium:A.SetSpeed](DEBUG): Uninitialize.
2012-09-19T15:21:11.834Z,1348068071.834 [Default:Iridium:Read_Iridium] Stopped
2012-09-19T15:21:11.834Z,1348068071.834 [Default:CallIridium] Stopped
2012-09-19T15:21:11.834Z,1348068071.834 [Default:CallIridium](INFO): Aggregate::uninitialize Default:CallIridium
2012-09-19T15:21:11.838Z,1348068071.838 [Default:CallIridium:B] Stopped
2012-09-19T15:21:11.839Z,1348068071.839 [Default:CallIridium:B](INFO): Aggregate::uninitialize Default:CallIridium:B
2012-09-19T15:21:11.839Z,1348068071.839 [Default:D.SetSpeed] Stopped
2012-09-19T15:21:11.839Z,1348068071.839 [Default:D.SetSpeed](DEBUG): Uninitialize.
2012-09-19T15:21:11.839Z,1348068071.839 [Default:E.GoToSurface] Stopped
2012-09-19T15:21:11.839Z,1348068071.839 [Default:E.GoToSurface](DEBUG): Uninitialize GoToSurfaceComponent.
2012-09-19T15:21:11.839Z,1348068071.839 [MissionManager](IMPORTANT): Started mission science_to_67_70
2012-09-19T15:21:11.839Z,1348068071.839 [science_to_67_70] Running Loop=1
2012-09-19T15:21:11.839Z,1348068071.839 [science_to_67_70](INFO): Aggregate::initialize science_to_67_70
2012-09-19T15:21:11.839Z,1348068071.839 [science_to_67_70:B.DepthEnvelope] Running Loop=1
2012-09-19T15:21:11.839Z,1348068071.839 [science_to_67_70:B.DepthEnvelope](DEBUG): Initialize DepthEnvelopeComponent.
2012-09-19T15:21:11.840Z,1348068071.841 [science_to_67_70:Science] Running Loop=1
2012-09-19T15:21:11.841Z,1348068071.841 [science_to_67_70:Science](INFO): Aggregate::initialize science_to_67_70:Science
2012-09-19T15:21:11.841Z,1348068071.841 [science_to_67_70:Science:A] Running Loop=1
2012-09-19T15:21:11.841Z,1348068071.841 [science_to_67_70:Science:B] Running Loop=1
2012-09-19T15:21:11.841Z,1348068071.841 [science_to_67_70:Science:C] Running Loop=1
2012-09-19T15:21:11.841Z,1348068071.841 [science_to_67_70:Science:D] Running Loop=1
2012-09-19T15:21:11.841Z,1348068071.841 [science_to_67_70:Science:E] Running Loop=1
2012-09-19T15:21:11.841Z,1348068071.841 [science_to_67_70:Science:F] Running Loop=1
2012-09-19T15:21:11.841Z,1348068071.841 [science_to_67_70:Science:G] Running Loop=1
2012-09-19T15:21:11.841Z,1348068071.841 [science_to_67_70:G.Buoyancy] Running Loop=1
2012-09-19T15:21:11.841Z,1348068071.841 [science_to_67_70:G.Buoyancy](DEBUG): Initialize Buoyancy Component.
2012-09-19T15:21:11.841Z,1348068071.841 [science_to_67_70:H.SetSpeed] Running Loop=1
2012-09-19T15:21:11.841Z,1348068071.841 [science_to_67_70:H.SetSpeed](DEBUG): Initialize.
2012-09-19T15:21:11.841Z,1348068071.842 [science_to_67_70:I.DepthEnvelope] Running Loop=1
2012-09-19T15:21:11.842Z,1348068071.842 [science_to_67_70:I.DepthEnvelope](DEBUG): Initialize DepthEnvelopeComponent.
2012-09-19T15:21:11.847Z,1348068071.847 [science_to_67_70:J.YoYo] Running Loop=1
2012-09-19T15:21:11.847Z,1348068071.847 [science_to_67_70:J.YoYo](DEBUG): Initialize YoYoComponent.
2012-09-19T15:21:11.847Z,1348068071.847 [science_to_67_70:SURFACECOMMS] Running Loop=1
2012-09-19T15:21:11.848Z,1348068071.848 [science_to_67_70:SURFACECOMMS](INFO): Aggregate::initialize science_to_67_70:SURFACECOMMS
2012-09-19T15:21:11.848Z,1348068071.848 [science_to_67_70:SURFACECOMMS:A.GoToSurface] Running Loop=1
2012-09-19T15:21:11.848Z,1348068071.848 [science_to_67_70:SURFACECOMMS:A.GoToSurface](DEBUG): Initialize GoToSurfaceComponent.
2012-09-19T15:21:11.849Z,1348068071.849 [science_to_67_70:J.YoYo] Running Loop=1
2012-09-19T15:21:11.858Z,1348068071.858 [science_to_67_70:I.DepthEnvelope] Running Loop=1
2012-09-19T15:21:11.872Z,1348068071.872 [science_to_67_70:H.SetSpeed] Running Loop=1
2012-09-19T15:21:11.880Z,1348068071.880 [science_to_67_70:G.Buoyancy] Running Loop=1
2012-09-19T15:21:11.889Z,1348068071.889 [science_to_67_70:Science] Running Loop=1
2012-09-19T15:21:11.890Z,1348068071.890 [science_to_67_70:Science:PeakDetectChl] Running Loop=1
2012-09-19T15:21:11.890Z,1348068071.890 [science_to_67_70:Science:PeakDetectChl](INFO): Aggregate::initialize science_to_67_70:Science:PeakDetectChl
2012-09-19T15:21:11.890Z,1348068071.890 [science_to_67_70:Science:PeakDetectChl:A.PeakDetectVsDepth] Running Loop=1
2012-09-19T15:21:11.894Z,1348068071.894 [science_to_67_70:Science:PeakDetectChl:A.PeakDetectVsDepth](INFO): Initialize.
2012-09-19T15:21:11.904Z,1348068071.904 [science_to_67_70:Science:G] Running Loop=1
2012-09-19T15:21:11.905Z,1348068071.905 [science_to_67_70:Science:G](DEBUG): Initialize ReadDataComponent to sense mass_concentration_of_chlorophyll_in_sea_water
2012-09-19T15:21:11.910Z,1348068071.910 [science_to_67_70:Science:F] Running Loop=1
2012-09-19T15:21:11.911Z,1348068071.911 [science_to_67_70:Science:F](DEBUG): Initialize ReadDataComponent to sense DVL_micro.Beam1RSSI
2012-09-19T15:21:11.912Z,1348068071.912 [science_to_67_70:Science:E] Running Loop=1
2012-09-19T15:21:11.913Z,1348068071.913 [science_to_67_70:Science:E](DEBUG): Initialize ReadDataComponent to sense DVL_micro.AdcpXWaterVelocity
2012-09-19T15:21:11.918Z,1348068071.918 [science_to_67_70:Science:D] Running Loop=1
2012-09-19T15:21:11.919Z,1348068071.919 [science_to_67_70:Science:D](DEBUG): Initialize ReadDataComponent to sense Turbulence_NPS.MicroCond
2012-09-19T15:21:11.920Z,1348068071.920 [science_to_67_70:Science:C] Running Loop=1
2012-09-19T15:21:11.921Z,1348068071.921 [science_to_67_70:Science:C](DEBUG): Initialize ReadDataComponent to sense sea_water_temperature
2012-09-19T15:21:11.922Z,1348068071.922 [science_to_67_70:Science:C](DEBUG): Initialize ReadDataComponent to sense sea_water_salinity
2012-09-19T15:21:11.927Z,1348068071.927 [science_to_67_70:Science:B] Running Loop=1
2012-09-19T15:21:11.928Z,1348068071.928 [science_to_67_70:Science:B](DEBUG): Initialize ReadDataComponent to sense mole_concentration_of_nitrate_in_sea_water
2012-09-19T15:21:11.942Z,1348068071.943 [science_to_67_70:SURFACECOMMS:B] Running Loop=1
2012-09-19T15:21:11.943Z,1348068071.943 [science_to_67_70:SURFACECOMMS:B](INFO): Aggregate::initialize science_to_67_70:SURFACECOMMS:B
2012-09-19T15:21:11.943Z,1348068071.943 [science_to_67_70:SURFACECOMMS:B:A] Running Loop=1
2012-09-19T15:21:11.943Z,1348068071.943 [science_to_67_70:OffshoreWrapper] Running Loop=1
2012-09-19T15:21:11.943Z,1348068071.943 [science_to_67_70:OffshoreWrapper](INFO): Aggregate::initialize science_to_67_70:OffshoreWrapper
2012-09-19T15:21:11.943Z,1348068071.943 [science_to_67_70:OffshoreWrapper:A.OffshoreEnvelope] Running Loop=1
2012-09-19T15:21:11.943Z,1348068071.943 [science_to_67_70:OffshoreWrapper:A.OffshoreEnvelope](DEBUG): Initialize OffshoreEnvelopeComponent.
2012-09-19T15:21:11.943Z,1348068071.944 [science_to_67_70:OffshoreWrapper:B.Wait] Running Loop=1
2012-09-19T15:21:11.943Z,1348068071.944 [science_to_67_70:OffshoreWrapper:B.Wait](DEBUG): Initialize Wait Component.
2012-09-19T15:21:11.952Z,1348068071.952 [science_to_67_70:OffshoreWrapper:A.OffshoreEnvelope] Running Loop=1
2012-09-19T15:21:11.983Z,1348068071.983 [science_to_67_70:B.DepthEnvelope] Running Loop=1
2012-09-19T15:21:11.992Z,1348068071.992 [science_to_67_70:AltEnvWrapper] Running Loop=1
2012-09-19T15:21:11.992Z,1348068071.992 [science_to_67_70:AltEnvWrapper](INFO): Aggregate::initialize science_to_67_70:AltEnvWrapper
2012-09-19T15:21:11.992Z,1348068071.992 [science_to_67_70:AltEnvWrapper:A.AltitudeEnvelope] Running Loop=1
2012-09-19T15:21:11.992Z,1348068071.992 [science_to_67_70:AltEnvWrapper:A.AltitudeEnvelope](DEBUG): Initialize AltitudeEnvelopeComponent.
2012-09-19T15:21:11.993Z,1348068071.993 [science_to_67_70:AltEnvWrapper:B.Wait] Running Loop=1
2012-09-19T15:21:11.993Z,1348068071.993 [science_to_67_70:AltEnvWrapper:B.Wait](DEBUG): Initialize Wait Component.
2012-09-19T15:21:11.999Z,1348068071.999 [DVL_micro](INFO): resume:Powering up
2012-09-19T15:21:12.008Z,1348068072.008 [science_to_67_70:AltEnvWrapper:A.AltitudeEnvelope] Running Loop=1
2012-09-19T15:21:12.043Z,1348068072.043 [WetLabsBB2FL](INFO): Powering up
2012-09-19T15:21:12.416Z,1348068072.416 [science_to_67_70:J.YoYo] Preempted
2012-09-19T15:21:12.416Z,1348068072.416 [science_to_67_70:I.DepthEnvelope] Preempted
2012-09-19T15:21:12.416Z,1348068072.416 [science_to_67_70:H.SetSpeed] Preempted
2012-09-19T15:21:12.416Z,1348068072.416 [science_to_67_70:G.Buoyancy] Preempted
2012-09-19T15:21:12.416Z,1348068072.416 [science_to_67_70:Science] Preempted
2012-09-19T15:21:12.416Z,1348068072.416 [science_to_67_70:Science:B] Preempted
2012-09-19T15:21:12.416Z,1348068072.416 [science_to_67_70:Science:C] Preempted
2012-09-19T15:21:12.416Z,1348068072.416 [science_to_67_70:Science:D] Preempted
2012-09-19T15:21:12.416Z,1348068072.416 [science_to_67_70:Science:E] Preempted
2012-09-19T15:21:12.416Z,1348068072.416 [science_to_67_70:Science:F] Preempted
2012-09-19T15:21:12.416Z,1348068072.416 [science_to_67_70:Science:G] Preempted
2012-09-19T15:21:12.417Z,1348068072.417 [science_to_67_70:SURFACECOMMS:B:A](DEBUG): Initialize ReadDataComponent to sense latitude_fix
2012-09-19T15:21:13.291Z,1348068073.291 [WetLabsBB2FL](INFO): Powering down
2012-09-19T15:21:13.506Z,1348068073.506 [DVL_micro](INFO): Querying output modes
2012-09-19T15:21:13.507Z,1348068073.507 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD0606

2012-09-19T15:21:13.514Z,1348068073.514 [DVL_micro](DEBUG): cmdResponse: 01 03 16
2012-09-19T15:21:13.515Z,1348068073.515 [DVL_micro](INFO): NQ1 output enabled
2012-09-19T15:21:13.515Z,1348068073.515 [DVL_micro](INFO): RSSI output enabled
2012-09-19T15:21:13.515Z,1348068073.515 [DVL_micro](INFO): ADCP output enabled
2012-09-19T15:21:13.515Z,1348068073.515 [DVL_micro](DEBUG): commandDVL: #&!LQNQ.COMD2525

2012-09-19T15:21:13.522Z,1348068073.523 [DVL_micro](DEBUG): cmdResponse: AUTO_VEL_ON 
2012-09-19T15:21:13.524Z,1348068073.524 [DVL_micro](INFO): RSSI unrequested
2012-09-19T15:21:13.524Z,1348068073.524 [DVL_micro](INFO): ADCP unrequested
2012-09-19T15:21:15.398Z,1348068075.398 [MassServo](FAULT): Overload Error
2012-09-19T15:21:15.399Z,1348068075.399 [MassServo] Hardware Fault, FailCount= 1
2012-09-19T15:21:15.399Z,1348068075.399 [MassServo](ERROR): Hardware Fault
2012-09-19T15:21:15.493Z,1348068075.493 [CBIT](ERROR): Hardware Fault in component: MassServo
2012-09-19T15:21:15.783Z,1348068075.783 [MassServo](DEBUG): Uninitialize Mass Servo.
2012-09-19T15:21:15.783Z,1348068075.783 [MassServo](INFO): Powering down
2012-09-19T15:21:15.857Z,1348068075.857 [CBIT](INFO): Clearing failed state for component MassServo
2012-09-19T15:21:15.857Z,1348068075.857 [MassServo] No Fault, FailCount= 1
2012-09-19T15:21:16.227Z,1348068076.227 [MassServo](DEBUG): Initializing EZServoServo.
2012-09-19T15:21:16.347Z,1348068076.347 [MassServo](DEBUG): Initialization error opening port: port not yet opened
2012-09-19T15:21:16.347Z,1348068076.348 [MassServo](DEBUG): Initializing MassServo.
2012-09-19T15:21:18.945Z,1348068078.945 [PAR_Licor](ERROR): PAR reading out of range: 0.000000 uMol/s/m2
2012-09-19T15:21:20.594Z,1348068080.594 [PAR_Licor](ERROR): PAR reading out of range: -0.009537 uMol/s/m2
2012-09-19T15:21:21.927Z,1348068081.927 [MassServo](FAULT): Overload Error
2012-09-19T15:21:21.927Z,1348068081.927 [MassServo] Hardware Fault, FailCount= 2
2012-09-19T15:21:21.927Z,1348068081.927 [MassServo](ERROR): Hardware Fault
2012-09-19T15:21:21.953Z,1348068081.953 [CBIT](ERROR): Hardware Fault in component: MassServo
2012-09-19T15:21:22.189Z,1348068082.189 [PAR_Licor](ERROR): PAR reading out of range: -0.069938 uMol/s/m2
2012-09-19T15:21:22.403Z,1348068082.403 [MassServo](DEBUG): Uninitialize Mass Servo.
2012-09-19T15:21:22.403Z,1348068082.403 [MassServo](INFO): Powering down
2012-09-19T15:21:22.429Z,1348068082.429 [CBIT](INFO): Clearing failed state for component MassServo
2012-09-19T15:21:22.429Z,1348068082.429 [MassServo] No Fault, FailCount= 2
2012-09-19T15:21:22.716Z,1348068082.716 [MassServo](DEBUG): Initializing EZServoServo.
2012-09-19T15:21:22.836Z,1348068082.836 [MassServo](DEBUG): Initialization error opening port: port not yet opened
2012-09-19T15:21:22.836Z,1348068082.836 [MassServo](DEBUG): Initializing MassServo.
2012-09-19T15:21:26.593Z,1348068086.593 [PAR_Licor](ERROR): PAR reading out of range: -0.033379 uMol/s/m2
2012-09-19T15:21:26.691Z,1348068086.691 [MassServo](FAULT): Overload Error
2012-09-19T15:21:26.691Z,1348068086.691 [MassServo] Hardware Fault, FailCount= 3
2012-09-19T15:21:26.691Z,1348068086.691 [MassServo](ERROR): Hardware Fault
2012-09-19T15:21:26.765Z,1348068086.765 [CBIT](ERROR): Hardware Fault in component: MassServo
2012-09-19T15:21:27.132Z,1348068087.132 [MassServo](DEBUG): Uninitialize Mass Servo.
2012-09-19T15:21:27.132Z,1348068087.132 [MassServo](INFO): Powering down
2012-09-19T15:21:27.157Z,1348068087.157 [CBIT](INFO): Clearing failed state for component MassServo
2012-09-19T15:21:27.157Z,1348068087.158 [MassServo] No Fault, FailCount= 3
2012-09-19T15:21:27.575Z,1348068087.575 [MassServo](DEBUG): Initializing EZServoServo.
2012-09-19T15:21:27.695Z,1348068087.695 [MassServo](DEBUG): Initialization error opening port: port not yet opened
2012-09-19T15:21:27.696Z,1348068087.695 [MassServo](DEBUG): Initializing MassServo.
2012-09-19T15:21:29.050Z,1348068089.050 [PAR_Licor](ERROR): PAR reading out of range: -0.017484 uMol/s/m2
2012-09-19T15:21:32.767Z,1348068092.767 [MassServo](FAULT): Overload Error
2012-09-19T15:21:32.767Z,1348068092.767 [MassServo] Hardware Fault, FailCount= 4
2012-09-19T15:21:32.767Z,1348068092.767 [MassServo](ERROR): Hardware Fault
2012-09-19T15:21:32.793Z,1348068092.793 [CBIT](ERROR): Hardware Fault in component: MassServo
2012-09-19T15:21:33.135Z,1348068093.135 [MassServo](DEBUG): Uninitialize Mass Servo.
2012-09-19T15:21:33.135Z,1348068093.135 [MassServo](INFO): Powering down
2012-09-19T15:21:33.161Z,1348068093.161 [CBIT](INFO): Clearing failed state for component MassServo
2012-09-19T15:21:33.161Z,1348068093.161 [MassServo] No Fault, FailCount= 4
2012-09-19T15:21:33.524Z,1348068093.524 [MassServo](DEBUG): Initializing EZServoServo.
2012-09-19T15:21:33.648Z,1348068093.648 [MassServo](DEBUG): Initialization error opening port: port not yet opened
2012-09-19T15:21:33.648Z,1348068093.648 [MassServo](DEBUG): Initializing MassServo.
2012-09-19T15:21:33.870Z,1348068093.870 [PAR_Licor](ERROR): PAR reading out of range: -0.017484 uMol/s/m2
2012-09-19T15:21:35.617Z,1348068095.617 [PAR_Licor](ERROR): PAR reading out of range: -0.011126 uMol/s/m2
2012-09-19T15:21:36.433Z,1348068096.433 [PAR_Licor](ERROR): PAR reading out of range: 0.000000 uMol/s/m2
2012-09-19T15:21:37.738Z,1348068097.739 [MassServo](FAULT): Overload Error
2012-09-19T15:21:37.739Z,1348068097.739 [MassServo] Hardware Fault, FailCount= 5
2012-09-19T15:21:37.739Z,1348068097.739 [MassServo](ERROR): Hardware Fault
2012-09-19T15:21:37.809Z,1348068097.809 [CBIT](ERROR): Hardware Fault in component: MassServo
2012-09-19T15:21:37.809Z,1348068097.809 [CBIT](CRITICAL): Hardware Fault in component: MassServo
2012-09-19T15:21:38.171Z,1348068098.171 [MassServo](DEBUG): Uninitialize Mass Servo.
2012-09-19T15:21:38.171Z,1348068098.171 [MassServo](INFO): Powering down
2012-09-19T15:21:38.490Z,1348068098.490 [science_to_67_70] Stopped
2012-09-19T15:21:38.498Z,1348068098.498 [science_to_67_70](INFO): Aggregate::uninitialize science_to_67_70
2012-09-19T15:21:38.498Z,1348068098.499 [science_to_67_70:AltEnvWrapper] Stopped
2012-09-19T15:21:38.499Z,1348068098.499 [science_to_67_70:AltEnvWrapper](INFO): Aggregate::uninitialize science_to_67_70:AltEnvWrapper
2012-09-19T15:21:38.499Z,1348068098.499 [science_to_67_70:AltEnvWrapper:A.AltitudeEnvelope] Stopped
2012-09-19T15:21:38.499Z,1348068098.499 [science_to_67_70:AltEnvWrapper:A.AltitudeEnvelope](DEBUG): Uninitialize AltitudeEnvelopeComponent.
2012-09-19T15:21:38.499Z,1348068098.499 [science_to_67_70:AltEnvWrapper:B.Wait] Stopped
2012-09-19T15:21:38.499Z,1348068098.499 [science_to_67_70:AltEnvWrapper:B.Wait](DEBUG): Uninitialize Wait Component.
2012-09-19T15:21:38.499Z,1348068098.499 [science_to_67_70:B.DepthEnvelope] Stopped
2012-09-19T15:21:38.499Z,1348068098.499 [science_to_67_70:B.DepthEnvelope](DEBUG): Uninitialize.
2012-09-19T15:21:38.499Z,1348068098.499 [science_to_67_70:OffshoreWrapper] Stopped
2012-09-19T15:21:38.499Z,1348068098.499 [science_to_67_70:OffshoreWrapper](INFO): Aggregate::uninitialize science_to_67_70:OffshoreWrapper
2012-09-19T15:21:38.499Z,1348068098.499 [science_to_67_70:OffshoreWrapper:A.OffshoreEnvelope] Stopped
2012-09-19T15:21:38.499Z,1348068098.499 [science_to_67_70:OffshoreWrapper:A.OffshoreEnvelope](DEBUG): Uninitialize OffshoreEnvelopeComponent.
2012-09-19T15:21:38.500Z,1348068098.500 [science_to_67_70:OffshoreWrapper:B.Wait] Stopped
2012-09-19T15:21:38.500Z,1348068098.500 [science_to_67_70:OffshoreWrapper:B.Wait](DEBUG): Uninitialize Wait Component.
2012-09-19T15:21:38.500Z,1348068098.500 [science_to_67_70:SURFACECOMMS] Stopped
2012-09-19T15:21:38.500Z,1348068098.500 [science_to_67_70:SURFACECOMMS](INFO): Aggregate::uninitialize science_to_67_70:SURFACECOMMS
2012-09-19T15:21:38.500Z,1348068098.500 [science_to_67_70:SURFACECOMMS:A.GoToSurface] Stopped
2012-09-19T15:21:38.500Z,1348068098.500 [science_to_67_70:SURFACECOMMS:A.GoToSurface](DEBUG): Uninitialize GoToSurfaceComponent.
2012-09-19T15:21:38.500Z,1348068098.500 [science_to_67_70:SURFACECOMMS:B] Stopped
2012-09-19T15:21:38.500Z,1348068098.500 [science_to_67_70:SURFACECOMMS:B](INFO): Aggregate::uninitialize science_to_67_70:SURFACECOMMS:B
2012-09-19T15:21:38.500Z,1348068098.500 [science_to_67_70:SURFACECOMMS:B:A] Stopped
2012-09-19T15:21:38.500Z,1348068098.500 [science_to_67_70:Science] Stopped
2012-09-19T15:21:38.500Z,1348068098.500 [science_to_67_70:Science](INFO): Aggregate::uninitialize science_to_67_70:Science
2012-09-19T15:21:38.501Z,1348068098.500 [science_to_67_70:Science:A] Stopped
2012-09-19T15:21:38.501Z,1348068098.500 [science_to_67_70:Science:B] Stopped
2012-09-19T15:21:38.501Z,1348068098.500 [science_to_67_70:Science:C] Stopped
2012-09-19T15:21:38.501Z,1348068098.501 [science_to_67_70:Science:D] Stopped
2012-09-19T15:21:38.501Z,1348068098.501 [science_to_67_70:Science:E] Stopped
2012-09-19T15:21:38.501Z,1348068098.501 [science_to_67_70:Science:F] Stopped
2012-09-19T15:21:38.501Z,1348068098.501 [science_to_67_70:Science:G] Stopped
2012-09-19T15:21:38.501Z,1348068098.501 [science_to_67_70:Science:PeakDetectChl] Stopped
2012-09-19T15:21:38.501Z,1348068098.501 [science_to_67_70:Science:PeakDetectChl](INFO): Aggregate::uninitialize science_to_67_70:Science:PeakDetectChl
2012-09-19T15:21:38.501Z,1348068098.501 [science_to_67_70:Science:PeakDetectChl:A.PeakDetectVsDepth] Stopped
2012-09-19T15:21:38.501Z,1348068098.501 [science_to_67_70:Science:PeakDetectChl:A.PeakDetectVsDepth](DEBUG): Uninitialize.
2012-09-19T15:21:38.501Z,1348068098.501 [science_to_67_70:G.Buoyancy] Stopped
2012-09-19T15:21:38.501Z,1348068098.501 [science_to_67_70:G.Buoyancy](DEBUG): Uninitialize Buoyancy Component.
2012-09-19T15:21:38.501Z,1348068098.501 [science_to_67_70:H.SetSpeed] Stopped
2012-09-19T15:21:38.501Z,1348068098.501 [science_to_67_70:H.SetSpeed](DEBUG): Uninitialize.
2012-09-19T15:21:38.501Z,1348068098.501 [science_to_67_70:I.DepthEnvelope] Stopped
2012-09-19T15:21:38.502Z,1348068098.501 [science_to_67_70:I.DepthEnvelope](DEBUG): Uninitialize.
2012-09-19T15:21:38.502Z,1348068098.501 [science_to_67_70:J.YoYo] Stopped
2012-09-19T15:21:38.502Z,1348068098.502 [science_to_67_70:J.YoYo](DEBUG): Uninitialize YoYoComponent.
2012-09-19T15:21:38.865Z,1348068098.865 [MissionManager](IMPORTANT): Started mission Default
2012-09-19T15:21:38.866Z,1348068098.866 [Default] Running Loop=1
2012-09-19T15:21:38.866Z,1348068098.866 [Default](INFO): Aggregate::initialize Default
2012-09-19T15:21:38.866Z,1348068098.866 [Default:D.SetSpeed] Running Loop=1
2012-09-19T15:21:38.866Z,1348068098.866 [Default:D.SetSpeed](DEBUG): Initialize.
2012-09-19T15:21:38.866Z,1348068098.866 [Default:E.GoToSurface] Running Loop=1
2012-09-19T15:21:38.870Z,1348068098.870 [Default:E.GoToSurface](DEBUG): Initialize GoToSurfaceComponent.
2012-09-19T15:21:38.871Z,1348068098.871 [Default:Iridium] Running Loop=1
2012-09-19T15:21:38.871Z,1348068098.871 [Default:Iridium](INFO): Aggregate::initialize Default:Iridium
2012-09-19T15:21:38.871Z,1348068098.871 [Default:Iridium:A.SetSpeed] Running Loop=1
2012-09-19T15:21:38.871Z,1348068098.871 [Default:Iridium:A.SetSpeed](DEBUG): Initialize.
2012-09-19T15:21:38.871Z,1348068098.871 [Default:Iridium:B.GoToSurface] Running Loop=1
2012-09-19T15:21:38.871Z,1348068098.871 [Default:Iridium:B.GoToSurface](DEBUG): Initialize GoToSurfaceComponent.
2012-09-19T15:21:38.872Z,1348068098.872 [Default:CallIridium] Running Loop=1
2012-09-19T15:21:38.873Z,1348068098.872 [Default:CallIridium](INFO): Aggregate::initialize Default:CallIridium
2012-09-19T15:21:38.873Z,1348068098.873 [Default:CallIridium:A] Running Loop=1
2012-09-19T15:21:38.873Z,1348068098.873 [Default:CallIridium:A] Stopped
2012-09-19T15:21:38.873Z,1348068098.873 [Default:CallIridium:B] Running Loop=1
2012-09-19T15:21:38.873Z,1348068098.873 [Default:CallIridium:B](INFO): Aggregate::initialize Default:CallIridium:B
2012-09-19T15:21:38.874Z,1348068098.874 [Default:Iridium:B.GoToSurface] Stopped
2012-09-19T15:21:38.874Z,1348068098.874 [Default:Iridium:B.GoToSurface](DEBUG): Uninitialize GoToSurfaceComponent.
2012-09-19T15:21:38.878Z,1348068098.878 [Default:Iridium:Read_Iridium] Running Loop=1
2012-09-19T15:21:38.879Z,1348068098.879 [Default:GPS] Running Loop=1
2012-09-19T15:21:38.879Z,1348068098.879 [Default:GPS](INFO): Aggregate::initialize Default:GPS
2012-09-19T15:21:38.879Z,1348068098.879 [Default:GPS:A.SetSpeed] Running Loop=1
2012-09-19T15:21:38.879Z,1348068098.879 [Default:GPS:A.SetSpeed](DEBUG): Initialize.
2012-09-19T15:21:38.879Z,1348068098.879 [Default:GPS:B.GoToSurface] Running Loop=1
2012-09-19T15:21:38.879Z,1348068098.879 [Default:GPS:B.GoToSurface](DEBUG): Initialize GoToSurfaceComponent.
2012-09-19T15:21:38.880Z,1348068098.880 [Default:GPS:B.GoToSurface] Stopped
2012-09-19T15:21:38.880Z,1348068098.880 [Default:GPS:B.GoToSurface](DEBUG): Uninitialize GoToSurfaceComponent.
2012-09-19T15:21:38.880Z,1348068098.880 [Default:GPS:Read_GPS] Running Loop=1
2012-09-19T15:21:39.642Z,1348068099.642 [PAR_Licor](ERROR): PAR reading out of range: -0.034969 uMol/s/m2
2012-09-19T15:21:52.191Z,1348068112.191 [PAR_Licor](ERROR): PAR reading out of range: -0.049274 uMol/s/m2
2012-09-19T15:21:58.845Z,1348068118.845 [PAR_Licor](ERROR): PAR reading out of range: -0.012716 uMol/s/m2
2012-09-19T15:22:04.191Z,1348068124.191 [CommandLine](IMPORTANT): got command set NAL9602.latitude_fix 36.799999 degree
2012-09-19T15:22:04.192Z,1348068124.192 [CommandLine](IMPORTANT): got command set NAL9602.longitude_fix -121.779999 degree
2012-09-19T15:22:04.428Z,1348068124.428 [Default:GPS:Read_GPS] Stopped
2012-09-19T15:22:04.428Z,1348068124.428 [Default:GPS:D] Running Loop=1
2012-09-19T15:22:04.850Z,1348068124.850 [Default:GPS:D] Stopped
2012-09-19T15:22:04.863Z,1348068124.863 [Default:GPS](INFO): Completed Default:GPS
2012-09-19T15:22:04.863Z,1348068124.863 [Default:GPS] Stopped
2012-09-19T15:22:04.863Z,1348068124.863 [Default:GPS](INFO): Aggregate::uninitialize Default:GPS
2012-09-19T15:22:04.863Z,1348068124.863 [Default:GPS:A.SetSpeed] Stopped
2012-09-19T15:22:04.863Z,1348068124.863 [Default:GPS:A.SetSpeed](DEBUG): Uninitialize.
2012-09-19T15:22:04.945Z,1348068124.945 [CommandLine](IMPORTANT): got command set NAL9602.platform_communications 1.000000 bool
2012-09-19T15:22:05.224Z,1348068125.224 [Default:Iridium:Read_Iridium] Stopped
2012-09-19T15:22:05.225Z,1348068125.224 [Default:Iridium](INFO): Completed Default:Iridium
2012-09-19T15:22:05.225Z,1348068125.225 [Default:Iridium] Stopped
2012-09-19T15:22:05.225Z,1348068125.225 [Default:Iridium](INFO): Aggregate::uninitialize Default:Iridium
2012-09-19T15:22:05.225Z,1348068125.225 [Default:Iridium:A.SetSpeed] Stopped
2012-09-19T15:22:05.225Z,1348068125.225 [Default:Iridium:A.SetSpeed](DEBUG): Uninitialize.
2012-09-19T15:22:05.225Z,1348068125.225 [Default:F.Wait] Running Loop=1
2012-09-19T15:22:05.225Z,1348068125.225 [Default:F.Wait](DEBUG): Initialize Wait Component.
2012-09-19T15:22:05.591Z,1348068125.591 [Default:CallIridium:B](INFO): Completed Default:CallIridium:B
2012-09-19T15:22:05.591Z,1348068125.591 [Default:CallIridium:B] Stopped
2012-09-19T15:22:05.591Z,1348068125.591 [Default:CallIridium:B](INFO): Aggregate::uninitialize Default:CallIridium:B
2012-09-19T15:22:05.591Z,1348068125.591 [Default:CallIridium](INFO): Completed Default:CallIridium
2012-09-19T15:22:05.591Z,1348068125.591 [Default:CallIridium] Stopped
2012-09-19T15:22:05.591Z,1348068125.591 [Default:CallIridium](INFO): Aggregate::uninitialize Default:CallIridium
2012-09-19T15:22:10.714Z,1348068130.714 [PAR_Licor](ERROR): PAR reading out of range: -0.004768 uMol/s/m2
2012-09-19T15:22:20.682Z,1348068140.682 [NAL9602](INFO): Powering down
2012-09-19T15:22:25.777Z,1348068145.777 [PAR_Licor](ERROR): PAR reading out of range: -0.031790 uMol/s/m2
2012-09-19T15:22:37.887Z,1348068157.887 [CommandLine](IMPORTANT): got command show stack
2012-09-19T15:22:37.887Z,1348068157.887 [CommandLine](INFO): Behavior Stack:

2012-09-19T15:22:37.887Z,1348068157.887 [Default](INFO): Priority 0: Default:D.SetSpeed
2012-09-19T15:22:37.888Z,1348068157.888 [Default](INFO): Priority 1: Default:E.GoToSurface
2012-09-19T15:22:37.888Z,1348068157.888 [Default](INFO): Priority 2: Default:F.Wait
2012-09-19T15:22:40.764Z,1348068160.764 [PAR_Licor](ERROR): PAR reading out of range: -0.039737 uMol/s/m2
2012-09-19T15:22:55.697Z,1348068175.697 [PAR_Licor](ERROR): PAR reading out of range: -0.061990 uMol/s/m2
2012-09-19T15:23:35.921Z,1348068215.921 [PAR_Licor](ERROR): PAR reading out of range: -0.006358 uMol/s/m2
2012-09-19T15:23:50.685Z,1348068230.685 [PAR_Licor](ERROR): PAR reading out of range: -0.006358 uMol/s/m2
2012-09-19T15:24:18.663Z,1348068258.663 [CommandLine](IMPORTANT): got command quit
2012-09-19T15:24:19.718Z,1348068259.718 [Supervisor](DEBUG): Uninitializing supervisor and starting cleanup.  Bye!
2012-09-19T15:24:19.718Z,1348068259.718 [ComponentRegistry](INFO): Shutting down NavChartDb ThreadHandler
2012-09-19T15:24:19.866Z,1348068259.866 [ComponentRegistry](INFO): Shutting down WetLabsBB2FL ThreadHandler
2012-09-19T15:24:20.003Z,1348068260.003 [WetLabsBB2FL](INFO): Powering down
2012-09-19T15:24:20.006Z,1348068260.006 [ComponentRegistry](INFO): Shutting down Turbulence_NPS ThreadHandler
2012-09-19T15:24:20.023Z,1348068260.023 [Turbulence_NPS](INFO): Powering down
2012-09-19T15:24:20.034Z,1348068260.034 [ComponentRegistry](INFO): Shutting down CTD_NeilBrown ThreadHandler
2012-09-19T15:24:20.075Z,1348068260.075 [CTD_NeilBrown](INFO): Powering down
2012-09-19T15:24:20.082Z,1348068260.082 [ComponentRegistry](INFO): Shutting down DVL_micro ThreadHandler