Tethys Path

trajectory

20120604T211419 [NAL9601]:Failed to initiate SBD session. Error code: 2

20120604T211512 [AHRS_sp3003D]:Read Acceleration Vector Failure.

20120604T211512 [AHRS_sp3003D]:Communications Fault

20120604T211512 [CBIT]:Communications Fault in component: AHRS_sp3003D

20120604T211513 [NAL9601]:Failed to initiate SBD session. Error code: 2

20120604T212018 [Aanderaa_O2]:No communication! Re-starting

20120604T212031 [Aanderaa_O2]:No communication! Re-starting

20120604T212429 [Aanderaa_O2]:No communication! Re-starting

20120604T214217 [CTD_NeilBrown]:Salinity reading out of range: 15.931290 psu

20120604T214218 [CTD_NeilBrown]:Salinity reading out of range: 2.123220 psu

20120604T214218 [CTD_NeilBrown]:Salinity reading out of range: 27.458620 psu

20120604T214326 [Navigation]:Navigation Error 11.7 %DT

20120604T215012 [AHRS_sp3003D]:Read Heading/Pitch/Roll Failure.

20120604T215012 [AHRS_sp3003D]:Communications Fault

20120604T215012 [CBIT]:Communications Fault in component: AHRS_sp3003D

20120604T215531 [AHRS_sp3003D]:Read Magnetics Failure.

20120604T215531 [AHRS_sp3003D]:Communications Fault

20120604T215531 [CBIT]:Communications Fault in component: AHRS_sp3003D

20120604T220310 [CTD_NeilBrown]:Bad response: 1.47

20120604T220333 [AHRS_sp3003D]:Read Acceleration Vector Failure.

20120604T220805 [AHRS_sp3003D]:Read Magnetics Failure.

20120604T220942 [AHRS_sp3003D]:Read Acceleration Vector Failure.

20120604T220952 [CTD_NeilBrown]:Bad response: 10.26

20120604T223638 [CTD_NeilBrown]:Bad response: 17.17

20120604T224906 [Navigation]:Navigation Error 7.0 %DT

20120604T225233 [NAL9601]:Failed to initiate SBD session. Error code: 2

20120604T233556 [CTD_NeilBrown]:Bad response: 15764

20120604T234221 [AHRS_sp3003D]:Read Heading/Pitch/Roll Failure.

20120604T235246 [AHRS_sp3003D]:Read Heading/Pitch/Roll Failure.

20120604T235620 [Navigation]:Navigation Error 30.6 %DT

20120605T000513 [CBIT]:Beginning GF scan

20120605T002226 [RudderServo]:Overload Error

20120605T002226 [RudderServo]:Hardware Fault

20120605T002227 [CBIT]:Hardware Fault in component: RudderServo

20120605T005659 [CTD_NeilBrown]:Bad response: 40

20120605T010124 [CTD_NeilBrown]:Bad response: -0.18

20120605T020131 [CTD_NeilBrown]:Bad response: 5

20120605T020842 [CTD_NeilBrown]:Bad response: -0.98

20120605T033640 [CTD_NeilBrown]:Bad response: 0C
48.11

20120605T042532 [AHRS_sp3003D]:Read Magnetics Failure.

20120605T053407 [CTD_NeilBrown]:Bad response: -1.58

20120605T060540 [CBIT]:Beginning GF scan

20120605T120606 [CBIT]:Beginning GF scan

20120605T231543 [CTD_NeilBrown]:Bad response: .61

20120606T003402 [NAL9601]:Verify xmit timeout failure.

20120606T003402 [NAL9601]:Fill buffer uart error: serial timeout

20120606T003402 [NAL9601]:Failed to receive READY. Modem reported:

20120606T003433 [NAL9601]:Queried for signal strength and failed to receive response. serial timeout

20120606T003629 [NAL9601]:Inadequate Iridium signal strength reported: 0

20120606T003631 [NAL9601]:Inadequate Iridium signal strength reported: 0

20120606T003636 [NAL9601]:Inadequate Iridium signal strength reported: 0

20120606T035719 [NAL9601]:Initialized file: Config/vehicle.cfg

20120606T035723 [NAL9601]:Success executing cat Logs/latest/4FCEC9B4.part | gunzip -f -d | cat `cp Config/.svn/text-base/vehicle.cfg.svn-base Config/vehicle.cfg` | vim -e Config/vehicle.cfg

20120606T050630 [CommandLine]:got command restart application

20120606T050630 [MissionManager]:Started mission Default