2023-04-05T19:57:04.118Z,1680724624.118 [Supervisor](IMPORTANT): Reading configuration overrides from Data/persisted.cfg 2023-04-05T19:57:07.330Z,1680724627.330 [StratificationFrontDetector](IMPORTANT): thresholdVTHI set to: 0.050012 degC 2023-04-05T19:57:08.289Z,1680724628.289 [SBIT](IMPORTANT): git: 2023-04-04 2023-04-05T19:57:08.289Z,1680724628.289 [SBIT](IMPORTANT): Kernel Release: 2.6.27.8 2023-04-05T19:58:08.629Z,1680724688.629 [DAT](FAULT): failed to initialize, no bytes available on serial interface 2023-04-05T19:58:42.681Z,1680724722.681 [CommandExec](IMPORTANT): got command failComponent 2023-04-05T19:58:42.681Z,1680724722.681 [CommandExec](IMPORTANT): Failed components: 2023-04-05T19:58:42.681Z,1680724722.681 [CommandExec](IMPORTANT): No failed Components. 2023-04-05T19:59:12.328Z,1680724752.328 [DAT](FAULT): failed to initialize, no bytes available on serial interface 2023-04-05T19:59:37.772Z,1680724777.772 [SBIT](IMPORTANT): Beginning Startup BIT 2023-04-05T19:59:37.776Z,1680724777.776 [CBIT](IMPORTANT): Beginning ground fault scan 2023-04-05T19:59:48.724Z,1680724788.724 [CBIT](IMPORTANT): No ground fault detected mA: CHAN A0 (Batt): -0.003558 CHAN A1 (24V): -0.002563 CHAN A2 (12V): 0.000188 CHAN A3 (5V): 0.000525 CHAN B0 (3.3V): 0.000740 CHAN B1 (3.15aV): 0.000787 CHAN B2 (3.15bV): -0.000459 CHAN B3 (GND): 0.001147 OPEN: 0.004700 Full Scale: +/- 1 mA 2023-04-05T20:00:16.012Z,1680724816.012 [DAT](FAULT): failed to initialize, no bytes available on serial interface 2023-04-05T20:00:31.525Z,1680724831.525 [SBIT](FAULT): Mass: EXPECTED:0.032500 ACTUAL:0.032000 2023-04-05T20:00:31.525Z,1680724831.525 [SBIT](FAULT): Control surface position failure. 2023-04-05T20:00:31.918Z,1680724831.918 [SBIT](CRITICAL): SBIT FAILED 2023-04-05T20:00:31.918Z,1680724831.918 [SBIT](IMPORTANT): Listing configuration overrides from Data/persisted.cfg 2023-04-05T20:00:31.919Z,1680724831.919 [SBIT](IMPORTANT): BPC1.batteryMissingStickThreshold=5 count; 2023-04-05T20:00:31.919Z,1680724831.919 [SBIT](IMPORTANT): Depth_Keller.offset=3.9 decibar; 2023-04-05T20:00:31.919Z,1680724831.919 [SBIT](IMPORTANT): Express none CBIT.ampHoursUsed; 2023-04-05T20:00:31.919Z,1680724831.919 [SBIT](IMPORTANT): Express linearApproximation VerticalHomogeneityIndexCalculator.vertical_temperature_homogeneity_index 0.050000 celsius; 2023-04-05T20:00:31.919Z,1680724831.919 [SBIT](IMPORTANT): Express none WetLabsBB2FL.bin_mean_mass_concentration_of_chlorophyll_in_sea_water; 2023-04-05T20:00:31.919Z,1680724831.919 [SBIT](IMPORTANT): StratificationFrontDetector.loadAtStartup=1 bool; 2023-04-05T20:00:31.919Z,1680724831.919 [SBIT](IMPORTANT): StratificationFrontDetector.threshold_VTHI=0.05 celsius; 2023-04-05T20:00:31.919Z,1680724831.919 [SBIT](IMPORTANT): StratificationFrontDetector.verbosity=1 count; 2023-04-05T20:00:31.919Z,1680724831.919 [SBIT](IMPORTANT): VerticalControl.buoyancyNeutral=341.374110 cubic_centimeter; 2023-04-05T20:00:31.920Z,1680724831.920 [SBIT](IMPORTANT): VerticalControl.massDefault=3.25 centimeter; 2023-04-05T20:00:31.920Z,1680724831.920 [SBIT](IMPORTANT): VerticalControl.massPositionLimitAft=-28 millimeter; 2023-04-05T20:00:31.920Z,1680724831.920 [SBIT](IMPORTANT): VerticalControl.massPositionLimitFwd=32 millimeter; 2023-04-05T20:00:31.920Z,1680724831.920 [SBIT](IMPORTANT): VerticalControl.surfaceThreshold=1.5 meter; 2023-04-05T20:00:31.920Z,1680724831.920 [SBIT](IMPORTANT): VerticalHomogeneityIndexCalculator.depth3=15 meter; 2023-04-05T20:00:31.920Z,1680724831.920 [SBIT](IMPORTANT): VerticalHomogeneityIndexCalculator.depth4=20 meter; 2023-04-05T20:00:31.920Z,1680724831.920 [SBIT](IMPORTANT): VerticalHomogeneityIndexCalculator.loadAtStartup=1 bool; 2023-04-05T20:00:31.922Z,1680724831.922 [CommandExec](FAULT): Scheduling is paused 2023-04-05T20:00:32.315Z,1680724832.315 [MissionManager](IMPORTANT): Started mission Startup 2023-04-05T20:01:19.505Z,1680724879.505 [DAT](FAULT): failed to initialize, no bytes available on serial interface 2023-04-05T20:02:20.065Z,1680724940.065 [CommandExec](IMPORTANT): got command failComponent 2023-04-05T20:02:20.065Z,1680724940.065 [CommandExec](IMPORTANT): Failed components: 2023-04-05T20:02:20.065Z,1680724940.065 [CommandExec](IMPORTANT): No failed Components. 2023-04-05T20:02:23.208Z,1680724943.208 [DAT](FAULT): failed to initialize, no bytes available on serial interface 2023-04-05T20:02:32.734Z,1680724952.734 [MissionManager](IMPORTANT): Started mission Default 2023-04-05T20:02:51.289Z,1680724971.289 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session. 2023-04-05T20:05:01.317Z,1680725101.317 [DataOverHttps](IMPORTANT): SBD MTMSN=20230405T200500 2023-04-05T20:05:08.605Z,1680725108.605 [CommandExec](IMPORTANT): got command burn on 2023-04-05T20:05:08.605Z,1680725108.605 [CommandExec](IMPORTANT): Activating dropweight wire 2023-04-05T20:06:20.497Z,1680725180.497 [DataOverHttps](IMPORTANT): SBD MTMSN=20230405T200619 2023-04-05T20:06:27.941Z,1680725187.941 [CommandExec](IMPORTANT): got command burn off 2023-04-05T20:06:27.941Z,1680725187.941 [CommandExec](IMPORTANT): Deactivating dropweight wire 2023-04-05T20:07:49.446Z,1680725269.446 [NAL9602](FAULT): GPS failed to acquire within timeout. 2023-04-05T20:08:56.776Z,1680725336.776 [CommandExec](IMPORTANT): got command failComponent hardware DAT 2023-04-05T20:08:56.777Z,1680725336.777 [CommandExec](IMPORTANT): DAT failureMode is Hardware Fault 2023-04-05T20:10:00.060Z,1680725400.060 [DAT](FAULT): failed to initialize, no bytes available on serial interface 2023-04-05T20:11:03.560Z,1680725463.560 [DAT](FAULT): failed to initialize, no bytes available on serial interface 2023-04-05T20:11:03.881Z,1680725463.881 [CBIT](FAULT): Communications Fault in component: DAT 2023-04-05T20:13:27.420Z,1680725607.420 [CommandExec](IMPORTANT): got command failComponent 2023-04-05T20:13:27.421Z,1680725607.421 [CommandExec](IMPORTANT): Failed components: 2023-04-05T20:13:27.421Z,1680725607.421 [CommandExec](IMPORTANT): DAT: Communications Fault 2023-04-05T20:13:30.902Z,1680725610.902 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 10.962538 min 2023-04-05T20:13:34.084Z,1680725614.084 [CommandExec](IMPORTANT): got command failComponent none DAT 2023-04-05T20:13:34.084Z,1680725614.084 [CommandExec](IMPORTANT): DAT failureMode is No Fault 2023-04-05T20:14:28.281Z,1680725668.281 [CommandExec](IMPORTANT): got command configSet DAT.sbdAddress -1 enum persist 2023-04-05T20:18:32.674Z,1680725912.674 [NAL9602](FAULT): GPS failed to acquire within timeout. 2023-04-05T20:19:19.603Z,1680725959.603 [CommandExec](IMPORTANT): got command get depth 2023-04-05T20:19:19.604Z,1680725959.604 [CommandExec](IMPORTANT): depth 0.297899 m 2023-04-05T20:20:15.449Z,1680726015.449 [CommandExec](IMPORTANT): got command configSet Depth_Keller.offset 3 decibar persist 2023-04-05T20:20:16.905Z,1680726016.905 [Depth_Keller](FAULT): Pressure or depth reading out of range for max 3 samples 2023-04-05T20:20:17.774Z,1680726017.774 [Depth_Keller](FAULT): Pressure or depth reading out of range for max 3 samples 2023-04-05T20:20:18.541Z,1680726018.541 [Depth_Keller](FAULT): Pressure or depth reading out of range for max 3 samples 2023-04-05T20:20:19.344Z,1680726019.344 [Depth_Keller](FAULT): Pressure or depth reading out of range for max 3 samples 2023-04-05T20:20:20.144Z,1680726020.144 [Depth_Keller](FAULT): Pressure or depth reading out of range for max 3 samples 2023-04-05T20:20:20.946Z,1680726020.946 [Depth_Keller](FAULT): Pressure or depth reading out of range for max 3 samples 2023-04-05T20:20:21.197Z,1680726021.197 [CommandExec](IMPORTANT): got command get depth 2023-04-05T20:20:21.197Z,1680726021.197 [CommandExec](FAULT): Element has no value 2023-04-05T20:20:21.754Z,1680726021.754 [Depth_Keller](FAULT): Pressure or depth reading out of range for max 3 samples 2023-04-05T20:20:22.560Z,1680726022.560 [Depth_Keller](FAULT): Pressure or depth reading out of range for max 3 samples 2023-04-05T20:20:23.369Z,1680726023.369 [Depth_Keller](FAULT): Pressure or depth reading out of range for max 3 samples 2023-04-05T20:20:24.173Z,1680726024.173 [Depth_Keller](FAULT): Pressure or depth reading out of range for max 3 samples 2023-04-05T20:20:24.984Z,1680726024.984 [Depth_Keller](FAULT): Pressure or depth reading out of range for max 3 samples 2023-04-05T20:20:25.793Z,1680726025.793 [Depth_Keller](FAULT): Pressure or depth reading out of range for max 3 samples 2023-04-05T20:20:26.600Z,1680726026.600 [Depth_Keller](FAULT): Pressure or depth reading out of range for max 3 samples 2023-04-05T20:20:27.409Z,1680726027.409 [Depth_Keller](FAULT): Pressure or depth reading out of range for max 3 samples 2023-04-05T20:20:28.216Z,1680726028.216 [Depth_Keller](FAULT): Pressure or depth reading out of range for max 3 samples 2023-04-05T20:20:29.019Z,1680726029.019 [Depth_Keller](FAULT): Pressure or depth reading out of range for max 3 samples 2023-04-05T20:20:29.833Z,1680726029.833 [Depth_Keller](FAULT): Pressure or depth reading out of range for max 3 samples 2023-04-05T20:20:30.640Z,1680726030.640 [Depth_Keller](FAULT): Pressure or depth reading out of range for max 3 samples 2023-04-05T20:20:31.449Z,1680726031.449 [Depth_Keller](FAULT): Pressure or depth reading out of range for max 3 samples 2023-04-05T20:20:32.257Z,1680726032.257 [Depth_Keller](FAULT): Pressure or depth reading out of range for max 3 samples 2023-04-05T20:20:33.100Z,1680726033.100 [Depth_Keller](FAULT): Pressure or depth reading out of range for max 3 samples 2023-04-05T20:20:33.885Z,1680726033.885 [Depth_Keller](FAULT): Pressure or depth reading out of range for max 3 samples 2023-04-05T20:20:34.676Z,1680726034.676 [Depth_Keller](FAULT): Pressure or depth reading out of range for max 3 samples 2023-04-05T20:20:35.493Z,1680726035.493 [Depth_Keller](FAULT): Pressure or depth reading out of range for max 3 samples 2023-04-05T20:20:36.296Z,1680726036.296 [Depth_Keller](FAULT): Pressure or depth reading out of range for max 3 samples 2023-04-05T20:20:37.104Z,1680726037.104 [Depth_Keller](FAULT): Pressure or depth reading out of range for max 3 samples 2023-04-05T20:20:37.912Z,1680726037.912 [Depth_Keller](FAULT): Pressure or depth reading out of range for max 3 samples 2023-04-05T20:20:38.721Z,1680726038.721 [Depth_Keller](FAULT): Pressure or depth reading out of range for max 3 samples 2023-04-05T20:20:39.528Z,1680726039.528 [Depth_Keller](FAULT): Pressure or depth reading out of range for max 3 samples 2023-04-05T20:20:40.338Z,1680726040.338 [Depth_Keller](FAULT): Pressure or depth reading out of range for max 3 samples 2023-04-05T20:20:41.144Z,1680726041.144 [Depth_Keller](FAULT): Pressure or depth reading out of range for max 3 samples 2023-04-05T20:20:41.945Z,1680726041.945 [Depth_Keller](FAULT): Pressure or depth reading out of range for max 3 samples 2023-04-05T20:20:42.761Z,1680726042.761 [Depth_Keller](FAULT): Pressure or depth reading out of range for max 3 samples 2023-04-05T20:20:43.572Z,1680726043.572 [Depth_Keller](FAULT): Pressure or depth reading out of range for max 3 samples 2023-04-05T20:20:43.600Z,1680726043.600 [CommandExec](IMPORTANT): got command configSet Depth_Keller.offset 3.3 decibar persist 2023-04-05T20:20:49.516Z,1680726049.516 [CommandExec](IMPORTANT): got command get depth 2023-04-05T20:20:49.517Z,1680726049.517 [CommandExec](IMPORTANT): depth -0.309344 m 2023-04-05T20:21:02.802Z,1680726062.802 [CommandExec](IMPORTANT): got command configSet Depth_Keller.offset 3.5 decibar persist 2023-04-05T20:21:05.643Z,1680726065.643 [CommandExec](IMPORTANT): got command get depth 2023-04-05T20:21:05.644Z,1680726065.644 [CommandExec](IMPORTANT): depth -0.085753 m 2023-04-05T20:23:09.645Z,1680726189.645 [CommandExec](IMPORTANT): got command restart application