brizo Path

trajectory

20240916T232304 [BPC1]:BPC1B got IPBS message with 6 sticks (min is 7).

20240916T232318 [BPC1]:BPC1B got IPBS message with 6 sticks (min is 7).

20240916T232332 [BPC1]:BPC1B got IPBS message with 6 sticks (min is 7).

20240916T232433 [Default:CheckIn:E]:Default mission has been running for 7.245262 min

20240916T232505 [NAL9602]:Failed to receive proper response when querying signal strength for MT queue check.

20240916T232516 [CommandExec]:got command strobe off

20240916T232516 [CommandExec]:Deactivating strobe

20240916T232937 [NAL9602]:MT Queue status failed to be acquired within timeout. Will not retry this session.

20240916T233004 [Default:CheckIn:E]:Default mission has been running for 12.760516 min

20240916T233252 [BPC1]:BPC1B: No match for serial number 1717 in BPC1B's battery stick inventory (sticks 32-62 in onboard configuration file).

20240916T233552 [Default:CheckIn:E]:Default mission has been running for 18.571932 min

20240916T233625 [NAL9602]:Failed to receive proper response when querying signal strength for MT queue check.

20240916T234038 [NAL9602]:Failed to initiate SBD session. Error code: 2

20240916T234057 [NAL9602]:MT Queue status failed to be acquired within timeout. Will not retry this session.

20240916T234350 [BPC1]:Failed to receive data from all sticks prior to timeout. Will not retry this scan cycle.

20240916T234430 [CommandExec]:got command ibit

20240916T234430 [IBIT]:Beginning Initiated BIT

20240916T234430 [IBIT]:Beginning control surface checks.

20240916T234430 [CBIT]:Beginning ground fault scan

20240916T234517 [IBIT]:Communications Status:#Fix Status: 1#Iridium Signal Strength: 3#Latitude: 36.802357 Longitude: -121.787376

20240916T234517 [IBIT]:batteryCapacityThreshold: 50.000000 Ah

20240916T234517 [IBIT]:batteryVoltageThreshold: 13.700000 V

20240916T234517 [IBIT]:bitPressureThreshold: 0.750000 psi

20240916T234518 [IBIT]:Vehicle Heading:6.870187 degrees

20240916T235254 [NAL9602]:Failed to initiate SBD session. Error code: 2

20240917T001001 [NAL9602]:Failed to initiate SBD session. Error code: 2

20240917T005839 [NAL9602]:MT Queue status failed to be acquired within timeout. Will not retry this session.

20240917T010508 [NAL9602]:Failed to receive proper response when querying signal strength for MT queue check.

20240917T011451 [BPC1]:Failed to receive data from all sticks prior to timeout. Will not retry this scan cycle.

20240917T013209 [CommandExec]:got command load ./Missions/Transport/transit.tl

20240917T013211 [CommandExec]:Loaded ./Missions/Transport/transit.tl id=transit

20240917T013218 [CommandExec]:got command set transit.MissionTimeout 30 minute

20240917T013218 [CommandExec]:got command set transit.NeedCommsTime 15 minute

20240917T013218 [CommandExec]:got command set transit.Latitude 36.797 degree

20240917T013218 [CommandExec]:got command set transit.Longitude -121.847 degree

20240917T013218 [CommandExec]:got command run

20240917T013218 [CommandExec]:Running

20240917T013218 [MissionManager]:Started mission transit

20240917T013218 [transit:StandardEnvelopes:C.OffshoreEnvelope]:Offshore envelope ACTIVE

20240917T013220 [transit:Transit:Wpt1.Waypoint]:Navigating to waypoint: 36.797001,-121.847000

20240917T013220 [transit:StandardEnvelopes:A.AltitudeEnvelope]:Altitude Measurement is not Active.

20240917T013233 [CommandExec]:got command stop

20240917T013233 [CommandExec]:Scheduling is paused

20240917T013234 [MissionManager]:Started mission Default