////////////////////////////////////////////////////////////////
//
// PURPOSE: This contains ScienceModule parameters for Brizo.
//
// NOTES:   All values (except "strings") must be followed by
//          a unit abbreviation (or one of the unit-like
//          abbreviations: n/a, bool, enum, count).
//
////////////////////////////////////////////////////////////////

   ESPComponent.loadAtStartup                = 1 bool;
   ESPComponent.simulateHardware             = 0 bool;
   ESPComponent.pppConnect                   = "linkname esp noauth local lock 115200 10.89.5.2:10.89.5.3 persist maxfail 0 holdoff 10 lcp-echo-interval 60 lcp-echo-failure 3 proxyarp ktune deflate 12 ms-dns 8.8.8.8";

   PAR_Licor.loadAtStartup       = 1 bool;
   PAR_Licor.simulateHardware    = 0 bool;
   PAR_Licor.serial              = "UWQ9986";
   PAR_Licor.adcCal              = 8.76539e-06 uA/count; // = Vref/gain/ohms/ADCRange*1e6 uA/A ~= 2.5/1.0/136000/2^21*1e6
                                                      // NOTE: ohms and gain values for new non-preamp analog LCB are vehicle specific!
   PAR_Licor.darkCount           = 0 count;
   PAR_Licor.multiplier          = 185.17 umol/s/m2/uA; // from calibration sheet
   PAR_Licor.parCal              = 1.056 none;

   WetLabsBB2FL.loadAtStartup      = 1 bool;
   WetLabsBB2FL.simulateHardware   = 0 bool;
   WetLabsBB2FL.serial             = "bb2flmba-5406";
   // Per calibration 12/21/2018 for Serial 5406
   WetLabsBB2FL.chlAccuracy        = 0.0180 ug/l;
   WetLabsBB2FL.darkCounts470      = 53 count;
   WetLabsBB2FL.darkCounts650      = 22 count;
   WetLabsBB2FL.darkCountsChl      = 49 count;
   WetLabsBB2FL.scaleFactor470     = 1.138e-5 1/m/sr/count;
   WetLabsBB2FL.scaleFactor650     = 3.983e-6 1/m/sr/count;
   WetLabsBB2FL.scaleFactorChl     = 0.0116 ug/l/count;

   CTD_Seabird.loadAtStartup       = 1 bool;
   CTD_Seabird.simulateHardware    = 0 bool;