aku Path

trajectory

20180312T223042 [DeadReckonWithRespectToSeafloor]:Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan

20180312T223042 [DeadReckonWithRespectToSeafloor]:Software Fault

20180312T223042 [CBIT]:Software Fault in component: DeadReckonWithRespectToSeafloor

20180312T223343 [DeadReckonWithRespectToSeafloor]:Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan

20180312T223343 [DeadReckonWithRespectToSeafloor]:Software Fault

20180312T223343 [CBIT]:Software Fault in component: DeadReckonWithRespectToSeafloor

20180312T223458 [Default:CheckIn:E]:Default mission has been running for 18.111967 min

20180312T223644 [DeadReckonWithRespectToSeafloor]:Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan

20180312T223644 [DeadReckonWithRespectToSeafloor]:Software Fault

20180312T223644 [CBIT]:Software Fault in component: DeadReckonWithRespectToSeafloor

20180312T224348 [Default:CheckIn:E]:Default mission has been running for 26.941634 min

20180312T225425 [Default:CheckIn:E]:Default mission has been running for 37.566520 min

20180312T225438 [NAL9602]:GPS failed to acquire within timeout.

20180312T225438 [CBIT]:Data Fault in component: NAL9602

20180312T225639 [NAL9602]:Failed to initiate SBD session. Error code: 2

20180312T230030 [NAL9602]:Failed to initiate SBD session. Error code: 2

20180312T230108 [NAL9602]:Failed to initiate SBD session. Error code: 2

20180312T231503 [NAL9602]:MT Queue status failed to be acquired within timeout. Will not retry this session.

20180312T232034 [NAL9602]:GPS failed to acquire within timeout.

20180312T232034 [CBIT]:Data Fault in component: NAL9602

20180312T233214 [NAL9602]:GPS failed to acquire within timeout.

20180312T233215 [CBIT]:Data Fault in component: NAL9602

20180313T021320 [NAL9602]:Inadequate Iridium signal strength reported: 0

20180313T021323 [NAL9602]:Inadequate Iridium signal strength reported: 0

20180313T021331 [NAL9602]:Inadequate Iridium signal strength reported: 0

20180313T031820 [NAL9602]:MT Queue status failed to be acquired within timeout. Will not retry this session.

20180313T041407 [CBIT]:Beginning ground fault scan

20180313T051723 [Default:CheckIn:Read_Iridium:A_Timeout:B]:Dropped weight due to communications timeout.

20180313T051723 [CommandLine]:Scheduling is paused

20180313T052222 [CommandLine]:Deactivating dropweight wire

20180313T052820 [NAL9602]:MT Queue status failed to be acquired within timeout. Will not retry this session.

20180313T085757 [Default:CheckIn:Read_Iridium:A_Timeout:B]:Dropped weight due to communications timeout.

20180313T090257 [CommandLine]:Deactivating dropweight wire

20180313T101418 [CBIT]:Beginning ground fault scan

20180313T105039 [PNI_TCM]:Failed to acquire valid data within timeout.

20180313T105039 [CBIT]:Data Fault in component: PNI_TCM

20180313T105039 [PNI_TCM]:LCB fault: Software Overcurrent.

20180313T105039 [PNI_TCM]:Hardware Fault

20180313T110800 [Default:CheckIn:Read_Iridium:A_Timeout:B]:Dropped weight due to communications timeout.

20180313T111259 [CommandLine]:Deactivating dropweight wire

20180313T161430 [CBIT]:Beginning ground fault scan

20180313T212657 [Depth_Keller]:Data Fault

20180313T212657 [CBIT]:Data Fault in component: Depth_Keller

20180313T212706 [PNI_TCM]:Failed to acquire valid data within timeout.

20180313T212706 [CBIT]:Data Fault in component: PNI_TCM

20180313T212708 [Depth_Keller]:Data Fault

20180313T212708 [CBIT]:Data Fault in component: Depth_Keller

20180313T212709 [CBIT]:Data Fault in component: Depth_Keller

20180313T212709 [PAR_Licor]:Data Fault

20180313T212709 [CBIT]:Data Fault in component: PAR_Licor

20180313T212715 [PNI_TCM]:No parameter response UART error: serial timeout

20180313T212717 [PAR_Licor]:Data Fault

20180313T212717 [Depth_Keller]:Data Fault

20180313T212717 [CBIT]:Data Fault in component: PAR_Licor

20180313T212721 [PNI_TCM]:Failed to acquire valid data within timeout.

20180313T212721 [CBIT]:Data Fault in component: PNI_TCM

20180313T212728 [PAR_Licor]:Data Fault

20180313T212729 [CBIT]:Data Fault in component: PAR_Licor

20180313T212750 [PNI_TCM]:Failed to set parameters during initialization.

20180313T212800 [NAL9602]:Queried for signal strength and failed to receive proper response.

20180313T212808 [DAT]:unknown deviceResponse_: Teledyne Benthos DAT-900 Series##

20180313T212808 [DAT]:Communications Fault

20180313T212808 [DAT]:unknown deviceResponse_: on 8.10.9##

20180313T212808 [CBIT]:Communications Fault in component: DAT

20180313T212829 [PNI_TCM]:No parameter response UART error: serial timeout

20180313T212852 [NAL9602]:NAL9602 initialization error.

20180313T212852 [NAL9602]:Communications Fault

20180313T212852 [CBIT]:Communications Fault in component: NAL9602

20180313T212901 [PNI_TCM]:Failed to set parameters during initialization.

20180313T212912 [DAT]:failed to initialize; deviceResponse_ loaded: , available: MF FreqFeatures enabled ##LocalAddr | 2 ##user:2>##Teledyne Benthos DAT-900 Series##MF Frequency Band##Directional Acoustic Transponder version 8.10.9##Feb 8 2000 09:08:54 ##WARNING: battery low##XE

20180313T212912 [DAT]:Communications Fault

20180313T212912 [CBIT]:Communications Fault in component: DAT

20180313T212924 [PNI_TCM]:No parameter response UART error: serial timeout

20180313T213006 [PNI_TCM]:Failed to set parameters during initialization.

20180313T213015 [DAT]:failed to initialize; deviceResponse_ loaded: ##Teledyne Benthos DAT-900 Series##MF Frequency Band##Directional Acoustic Transponder version 8.10.9##Feb 8 2000 09:09:04 ##WARNING: battery low##[Bearing]##CONNECT, available: #ZE

20180313T213015 [DAT]:Communications Fault

20180313T213015 [CBIT]:Communications Fault in component: DAT

20180313T213023 [NAL9602]:Queried for signal strength and failed to receive proper response.

20180313T213048 [Depth_Keller]:Pressure reading out of range: 1600.437134 decibar

20180313T213115 [NAL9602]:NAL9602 initialization error.

20180313T213115 [NAL9602]:Communications Fault

20180313T213116 [CBIT]:Communications Fault in component: NAL9602

20180313T213119 [DAT]:failed to initialize; deviceResponse_ loaded: , available: ##Teledyne BentMF Frequency Band##Directional Acoustic Transponder verFeatures enabled ##LocalAddr | 2 ##user:2>##Teledyne Benthos DAT-900 Series##MF Frequency Band##Directional Acoustic Transponder version 8.10.9##Feb 8 2000 09:10:43 ##WARNING: battery low##0XE