2018-04-02T05:47:11.267Z,1522648031.267 [Supervisor](IMPORTANT): Reading configuration overrides from Data/persisted.cfg 2018-04-02T05:47:15.646Z,1522648035.646 [SBIT](IMPORTANT): git: 2018-03-26 2018-04-02T05:47:15.647Z,1522648035.647 [SBIT](IMPORTANT): Kernel Release: 2.6.27.8 2018-04-02T05:47:15.647Z,1522648035.647 [SBIT](IMPORTANT): Kernel Version:#2 PREEMPT Thu Jan 11 20:13:48 PST 2018 2018-04-02T05:47:17.961Z,1522648037.961 [BuoyancyServo](FAULT): Buoyancy failed to initialize 2018-04-02T05:47:21.981Z,1522648041.981 [BuoyancyServo](FAULT): Buoyancy failed to initialize 2018-04-02T05:47:49.292Z,1522648069.292 [SBIT](IMPORTANT): Beginning Startup BIT 2018-04-02T05:47:49.300Z,1522648069.300 [CBIT](IMPORTANT): Beginning ground fault scan 2018-04-02T05:48:00.632Z,1522648080.632 [CBIT](IMPORTANT): No ground fault detected mA: CHAN A0 (Batt): -0.014880 CHAN A1 (24V): -0.018644 CHAN A2 (12V): 0.003191 CHAN A3 (5V): -0.001494 CHAN B0 (3.3V): -0.001299 CHAN B1 (3.15aV): -0.001359 CHAN B2 (3.15bV): -0.001393 CHAN B3 (GND): -0.003655 OPEN: 0.010134 Full Scale Calc: 4.765 mA, -1.589 mA 2018-04-02T05:48:34.888Z,1522648114.888 [DAT](FAULT): unknown deviceResponse_: C:67 2018-04-02T05:48:43.343Z,1522648123.343 [SBIT](IMPORTANT): SBIT PASSED 2018-04-02T05:48:43.374Z,1522648123.374 [CommandLine](IMPORTANT): got command configSet list 2018-04-02T05:48:43.375Z,1522648123.375 [CommandLine](IMPORTANT): Listing configuration overrides from Data/persisted.cfg 2018-04-02T05:48:43.375Z,1522648123.375 [CommandLine](IMPORTANT): BuoyancyServo.limitLo=500 count; 2018-04-02T05:48:43.375Z,1522648123.375 [CommandLine](IMPORTANT): CBIT.abortDepth=300 meter; 2018-04-02T05:48:43.376Z,1522648123.376 [CommandLine](IMPORTANT): CBIT.runFaultClassifier=0 bool; 2018-04-02T05:48:43.376Z,1522648123.376 [CommandLine](IMPORTANT): CBIT.stopDepth=280 meter; 2018-04-02T05:48:43.376Z,1522648123.376 [CommandLine](IMPORTANT): DAT.loadAtStartup=1 bool; 2018-04-02T05:48:43.376Z,1522648123.376 [CommandLine](IMPORTANT): ESPComponent.loadAtStartup=1 bool; 2018-04-02T05:48:43.376Z,1522648123.376 [CommandLine](IMPORTANT): ESPComponent.sampleTimeout=10 minute; 2018-04-02T05:48:43.376Z,1522648123.376 [CommandLine](IMPORTANT): ESPComponent.simulateHardware=0 bool; 2018-04-02T05:48:43.376Z,1522648123.376 [CommandLine](IMPORTANT): ElevatorOffsetCalculator.loadAtStartup=1 bool; 2018-04-02T05:48:43.376Z,1522648123.376 [CommandLine](IMPORTANT): Express none ESPComponent.sample_number; 2018-04-02T05:48:43.376Z,1522648123.376 [CommandLine](IMPORTANT): Express none ESPComponent.sampling; 2018-04-02T05:48:43.377Z,1522648123.377 [CommandLine](IMPORTANT): Express none StratificationFrontDetector.front; 2018-04-02T05:48:43.377Z,1522648123.377 [CommandLine](IMPORTANT): Express none VerticalTemperatureHomogeneityIndexCalculator.vertical_temperature_homogeneity_index; 2018-04-02T05:48:43.377Z,1522648123.377 [CommandLine](IMPORTANT): Express linearApproximation depth 5.000000 meter; 2018-04-02T05:48:43.377Z,1522648123.377 [CommandLine](IMPORTANT): Express linearApproximation latitude 0.005000 angular_degree; 2018-04-02T05:48:43.377Z,1522648123.377 [CommandLine](IMPORTANT): Express linearApproximation longitude 0.005000 angular_degree; 2018-04-02T05:48:43.377Z,1522648123.377 [CommandLine](IMPORTANT): Express none mass_concentration_of_chlorophyll_in_sea_water; 2018-04-02T05:48:43.377Z,1522648123.377 [CommandLine](IMPORTANT): Express none sea_water_salinity; 2018-04-02T05:48:43.377Z,1522648123.377 [CommandLine](IMPORTANT): Express none sea_water_temperature; 2018-04-02T05:48:43.377Z,1522648123.377 [CommandLine](IMPORTANT): IBIT.batteryMissingStickThreshold=9 count; 2018-04-02T05:48:43.378Z,1522648123.378 [CommandLine](IMPORTANT): VerticalControl.buoyancyNeutral=450 cubic_centimeter; 2018-04-02T05:48:43.378Z,1522648123.378 [CommandLine](IMPORTANT): VerticalControl.massDefault=0.33 centimeter; 2018-04-02T05:48:43.758Z,1522648123.758 [MissionManager](IMPORTANT): Started mission Startup 2018-04-02T05:49:57.420Z,1522648197.420 [MissionManager](IMPORTANT): Started mission Default 2018-04-02T05:52:57.490Z,1522648377.490 [DAT](FAULT): unknown deviceResponse_: AGC:77 2018-04-02T05:59:27.512Z,1522648767.512 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 9.494810 min 2018-04-02T06:00:05.068Z,1522648805.068 [NAL9602](IMPORTANT): SBD MO Status=0, MOMSN=9561, MT Status=1, MTMSN=407 2018-04-02T06:00:05.675Z,1522648805.675 [CommandLine](IMPORTANT): got command load ./Missions/Transport/keepstation.xml 2018-04-02T06:00:06.222Z,1522648806.222 [CommandLine](IMPORTANT): Loaded ./Missions/Transport/keepstation.xml 2018-04-02T06:00:08.863Z,1522648808.863 [CommandLine](IMPORTANT): got command set keepstation.MissionTimeout 45.000000 minute 2018-04-02T06:00:08.864Z,1522648808.864 [CommandLine](IMPORTANT): got command set keepstation.Speed 1.000000 meter_per_second 2018-04-02T06:00:08.864Z,1522648808.864 [CommandLine](IMPORTANT): got command run 2018-04-02T06:00:08.872Z,1522648808.872 [CommandLine](IMPORTANT): Running 2018-04-02T06:00:08.936Z,1522648808.936 [MissionManager](IMPORTANT): Started mission keepstation 2018-04-02T06:00:54.941Z,1522648854.941 [DAT](FAULT): unknown deviceResponse_: 005 2018-04-02T06:02:35.244Z,1522648955.244 [DAT](FAULT): unknown deviceResponse_: 7a 2018-04-02T06:17:44.797Z,1522649864.797 [DAT](FAULT): unknown deviceResponse_: 05 2018-04-02T06:24:53.971Z,1522650293.971 [DAT](FAULT): unknown deviceResponse_: [00]<[03] type:7a 2018-04-02T06:27:49.952Z,1522650469.952 [DAT](FAULT): unknown deviceResponse_: ATR 2018-04-02T06:29:47.966Z,1522650587.966 [DAT](FAULT): unknown deviceResponse_: [00] ATR 2018-04-02T06:42:02.766Z,1522651322.766 [DAT](FAULT): unknown deviceResponse_: <[00] ATR 2018-04-02T06:45:09.600Z,1522651509.600 [MissionManager](IMPORTANT): Started mission Default 2018-04-02T06:52:55.272Z,1522651975.272 [DAT](FAULT): unknown deviceResponse_: l SNR:04.5 CCERR:005 2018-04-02T06:53:59.970Z,1522652039.970 [DAT](FAULT): failed to initialize; deviceResponse_ loaded: Rate 1/2 CC 12.50ms MGP user:1>, available: 2018-04-02T06:58:10.793Z,1522652290.793 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 13.013103 min 2018-04-02T07:06:40.547Z,1522652800.547 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 21.509987 min 2018-04-02T07:15:31.135Z,1522653331.135 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 30.352067 min 2018-04-02T07:21:56.836Z,1522653716.836 [DAT](FAULT): unknown deviceResponse_: ion stats SNR:01.0 MPD:03.7 SPD:-00.3 2018-04-02T07:21:56.837Z,1522653716.837 [DAT](FAULT): unknown deviceResponse_: Header stats CRC:Fail SNR:08.5 CCERR:003 2018-04-02T07:21:57.634Z,1522653717.634 [DAT](FAULT): LCB fault: Software Overcurrent. 2018-04-02T07:22:14.460Z,1522653734.460 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 37.074504 min 2018-04-02T07:22:44.420Z,1522653764.420 [NAL9602](IMPORTANT): SBD MO Status=0, MOMSN=9589, MT Status=1, MTMSN=408 2018-04-02T07:22:45.202Z,1522653765.202 [CommandLine](IMPORTANT): got command schedule asap "load Science/isotherm_depth_sampling.xml;set DriftOrDonutAtIsotherm.MissionTimeout 24 hour;set DriftOrDonutAtIsotherm.AcousticTrackingTimeout 2 hour;set DriftOrDonutAtIsotherm.FindHighChlLocation 0 bool" 175qq 1 7.000000 2018-04-02T07:22:45.203Z,1522653765.203 [CommandLine](IMPORTANT): Scheduling command #1 of 7 with id=175qq 2018-04-02T07:22:45.204Z,1522653765.204 [CommandLine](IMPORTANT): Scheduled #1 (#1 of 7 with id='175qq'): "load Science/isotherm_depth_sampling.xml;set DriftOrDonutAtIsotherm.MissionTimeout 24 hour;set DriftOrDonutAtIsotherm.AcousticTrackingTimeout 2 hour;set DriftOrDonutAtIsotherm.FindHighChlLocation 0 bool" ASAP 2018-04-02T07:24:07.987Z,1522653847.987 [NAL9602](IMPORTANT): SBD MO Status=1, MOMSN=9590, MT Status=1, MTMSN=409 2018-04-02T07:24:08.810Z,1522653848.810 [CommandLine](IMPORTANT): got command schedule asap "set DriftOrDonutAtIsotherm.CylinderYoYo 0 bool;set DriftOrDonutAtIsotherm.SpeedHoldingSampling 0.9 meter_per_second;set DriftOrDonutAtIsotherm.SpeedSpiral 0.9 meter_per_second;set DriftOrDonutAtIsotherm.MaxDepth 270 meter" 175qq 2 7.000000 2018-04-02T07:24:08.810Z,1522653848.810 [CommandLine](IMPORTANT): Scheduling command #2 of 7 with id=175qq 2018-04-02T07:24:08.811Z,1522653848.811 [CommandLine](IMPORTANT): Scheduled #2 (#2 of 7 with id='175qq'): "set DriftOrDonutAtIsotherm.CylinderYoYo 0 bool;set DriftOrDonutAtIsotherm.SpeedHoldingSampling 0.9 meter_per_second;set DriftOrDonutAtIsotherm.SpeedSpiral 0.9 meter_per_second;set DriftOrDonutAtIsotherm.MaxDepth 270 meter" ASAP 2018-04-02T07:24:27.863Z,1522653867.863 [NAL9602](IMPORTANT): SBD MO Status=1, MOMSN=9591, MT Status=1, MTMSN=410 2018-04-02T07:24:28.611Z,1522653868.611 [CommandLine](IMPORTANT): got command schedule asap "set DriftOrDonutAtIsotherm.ShallowBoundChl 5 meter;set DriftOrDonutAtIsotherm.DeepBoundChl 257 meter;set DriftOrDonutAtIsotherm.TempDiffFromPeakChl1 0 kelvin;set DriftOrDonutAtIsotherm.TempDiffFromPeakChl2 0 kelvin" 175qq 3 7.000000 2018-04-02T07:24:28.611Z,1522653868.611 [CommandLine](IMPORTANT): Scheduling command #3 of 7 with id=175qq 2018-04-02T07:24:28.612Z,1522653868.612 [CommandLine](IMPORTANT): Scheduled #3 (#3 of 7 with id='175qq'): "set DriftOrDonutAtIsotherm.ShallowBoundChl 5 meter;set DriftOrDonutAtIsotherm.DeepBoundChl 257 meter;set DriftOrDonutAtIsotherm.TempDiffFromPeakChl1 0 kelvin;set DriftOrDonutAtIsotherm.TempDiffFromPeakChl2 0 kelvin" ASAP 2018-04-02T07:24:40.599Z,1522653880.599 [NAL9602](IMPORTANT): SBD MO Status=1, MOMSN=9592, MT Status=1, MTMSN=411 2018-04-02T07:24:41.422Z,1522653881.422 [CommandLine](IMPORTANT): got command schedule asap "set DriftOrDonutAtIsotherm.TempDiffFromPeakChl3 0 kelvin;set DriftOrDonutAtIsotherm.Dep4 250 meter;set DriftOrDonutAtIsotherm.Dep5 250 meter;set DriftOrDonutAtIsotherm.Dep6 250 meter;set DriftOrDonutAtIsotherm.Dep7 50 meter" 175qq 4 7.000000 2018-04-02T07:24:41.423Z,1522653881.423 [CommandLine](IMPORTANT): Scheduling command #4 of 7 with id=175qq 2018-04-02T07:24:41.423Z,1522653881.423 [CommandLine](IMPORTANT): Scheduled #4 (#4 of 7 with id='175qq'): "set DriftOrDonutAtIsotherm.TempDiffFromPeakChl3 0 kelvin;set DriftOrDonutAtIsotherm.Dep4 250 meter;set DriftOrDonutAtIsotherm.Dep5 250 meter;set DriftOrDonutAtIsotherm.Dep6 250 meter;set DriftOrDonutAtIsotherm.Dep7 50 meter" ASAP 2018-04-02T07:24:50.080Z,1522653890.080 [NAL9602](IMPORTANT): SBD MO Status=0, MOMSN=9593, MT Status=1, MTMSN=412 2018-04-02T07:24:50.822Z,1522653890.822 [CommandLine](IMPORTANT): got command schedule asap "set DriftOrDonutAtIsotherm.Dep8 50 meter;set DriftOrDonutAtIsotherm.Dep9 50 meter;set DriftOrDonutAtIsotherm.WaitDepUndulation1 80 minute;set DriftOrDonutAtIsotherm.WaitDepUndulation2 5 minute" 175qq 5 7.000000 2018-04-02T07:24:50.822Z,1522653890.822 [CommandLine](IMPORTANT): Scheduling command #5 of 7 with id=175qq 2018-04-02T07:24:50.823Z,1522653890.823 [CommandLine](IMPORTANT): Scheduled #5 (#5 of 7 with id='175qq'): "set DriftOrDonutAtIsotherm.Dep8 50 meter;set DriftOrDonutAtIsotherm.Dep9 50 meter;set DriftOrDonutAtIsotherm.WaitDepUndulation1 80 minute;set DriftOrDonutAtIsotherm.WaitDepUndulation2 5 minute" ASAP 2018-04-02T07:25:18.728Z,1522653918.728 [NAL9602](IMPORTANT): SBD MO Status=1, MOMSN=9595, MT Status=1, MTMSN=413 2018-04-02T07:25:19.471Z,1522653919.471 [CommandLine](IMPORTANT): got command schedule asap "set DriftOrDonutAtIsotherm.WaitDepUndulation3 5 minute;set DriftOrDonutAtIsotherm.WaitDepUndulation5 5 minute;set DriftOrDonutAtIsotherm.WaitDepUndulation6 5 minute;set DriftOrDonutAtIsotherm.WaitDepUndulation8 5 minute" 175qq 6 7.000000 2018-04-02T07:25:19.471Z,1522653919.471 [CommandLine](IMPORTANT): Scheduling command #6 of 7 with id=175qq 2018-04-02T07:25:19.472Z,1522653919.472 [CommandLine](IMPORTANT): Scheduled #6 (#6 of 7 with id='175qq'): "set DriftOrDonutAtIsotherm.WaitDepUndulation3 5 minute;set DriftOrDonutAtIsotherm.WaitDepUndulation5 5 minute;set DriftOrDonutAtIsotherm.WaitDepUndulation6 5 minute;set DriftOrDonutAtIsotherm.WaitDepUndulation8 5 minute" ASAP 2018-04-02T07:25:19.663Z,1522653919.663 [DAT](FAULT): unknown deviceResponse_: s CRC:Fail SNR:06.0 CCERR:002 2018-04-02T07:25:42.040Z,1522653942.040 [NAL9602](IMPORTANT): SBD MO Status=1, MOMSN=9597, MT Status=1, MTMSN=414 2018-04-02T07:25:43.905Z,1522653943.905 [CommandLine](IMPORTANT): got command schedule asap "set DriftOrDonutAtIsotherm.WaitDepUndulation9 5 minute;set DriftOrDonutAtIsotherm.RudderAngleSpiral 10 degree;run " 175qq 7 7.000000 2018-04-02T07:25:43.905Z,1522653943.905 [CommandLine](IMPORTANT): Scheduling command #7 of 7 with id=175qq 2018-04-02T07:25:43.906Z,1522653943.906 [CommandLine](IMPORTANT): Scheduled #7 (#7 of 7 with id='175qq'): "set DriftOrDonutAtIsotherm.WaitDepUndulation9 5 minute;set DriftOrDonutAtIsotherm.RudderAngleSpiral 10 degree;run " ASAP 2018-04-02T07:25:45.622Z,1522653945.622 [CommandLine](IMPORTANT): got command load ./Missions/Science/isotherm_depth_sampling.xml 2018-04-02T07:26:03.828Z,1522653963.828 [CommandLine](IMPORTANT): Loaded ./Missions/Science/isotherm_depth_sampling.xml 2018-04-02T07:26:24.745Z,1522653984.745 [CommandLine](IMPORTANT): got command set DriftOrDonutAtIsotherm.MissionTimeout 24.000000 hour 2018-04-02T07:26:24.745Z,1522653984.745 [CommandLine](IMPORTANT): got command set DriftOrDonutAtIsotherm.AcousticTrackingTimeout 2.000000 hour 2018-04-02T07:26:24.746Z,1522653984.746 [CommandLine](IMPORTANT): got command set DriftOrDonutAtIsotherm.FindHighChlLocation 0.000000 bool 2018-04-02T07:26:44.036Z,1522654004.036 [CommandLine](IMPORTANT): got command set DriftOrDonutAtIsotherm.CylinderYoYo 0.000000 bool 2018-04-02T07:26:44.037Z,1522654004.037 [CommandLine](IMPORTANT): got command set DriftOrDonutAtIsotherm.SpeedHoldingSampling 0.900000 meter_per_second 2018-04-02T07:26:44.038Z,1522654004.038 [CommandLine](IMPORTANT): got command set DriftOrDonutAtIsotherm.SpeedSpiral 0.900000 meter_per_second 2018-04-02T07:26:44.039Z,1522654004.039 [CommandLine](IMPORTANT): got command set DriftOrDonutAtIsotherm.MaxDepth 270.000000 meter 2018-04-02T07:27:04.241Z,1522654024.241 [CommandLine](IMPORTANT): got command set DriftOrDonutAtIsotherm.ShallowBoundChl 5.000000 meter 2018-04-02T07:27:04.252Z,1522654024.252 [CommandLine](IMPORTANT): got command set DriftOrDonutAtIsotherm.DeepBoundChl 257.000000 meter 2018-04-02T07:27:04.259Z,1522654024.259 [CommandLine](IMPORTANT): got command set DriftOrDonutAtIsotherm.TempDiffFromPeakChl1 0.000000 kelvin 2018-04-02T07:27:04.264Z,1522654024.264 [CommandLine](IMPORTANT): got command set DriftOrDonutAtIsotherm.TempDiffFromPeakChl2 0.000000 kelvin 2018-04-02T07:27:25.332Z,1522654045.332 [CommandLine](IMPORTANT): got command set DriftOrDonutAtIsotherm.TempDiffFromPeakChl3 0.000000 kelvin 2018-04-02T07:27:25.333Z,1522654045.333 [CommandLine](IMPORTANT): got command set DriftOrDonutAtIsotherm.Dep4 250.000000 meter 2018-04-02T07:27:25.333Z,1522654045.333 [CommandLine](IMPORTANT): got command set DriftOrDonutAtIsotherm.Dep5 250.000000 meter 2018-04-02T07:27:25.334Z,1522654045.334 [CommandLine](IMPORTANT): got command set DriftOrDonutAtIsotherm.Dep6 250.000000 meter 2018-04-02T07:27:25.335Z,1522654045.335 [CommandLine](IMPORTANT): got command set DriftOrDonutAtIsotherm.Dep7 50.000000 meter 2018-04-02T07:27:42.838Z,1522654062.838 [CommandLine](IMPORTANT): got command set DriftOrDonutAtIsotherm.Dep8 50.000000 meter 2018-04-02T07:27:42.839Z,1522654062.839 [CommandLine](IMPORTANT): got command set DriftOrDonutAtIsotherm.Dep9 50.000000 meter 2018-04-02T07:27:42.840Z,1522654062.840 [CommandLine](IMPORTANT): got command set DriftOrDonutAtIsotherm.WaitDepUndulation1 80.000000 minute 2018-04-02T07:27:42.841Z,1522654062.841 [CommandLine](IMPORTANT): got command set DriftOrDonutAtIsotherm.WaitDepUndulation2 5.000000 minute 2018-04-02T07:28:03.306Z,1522654083.306 [CommandLine](IMPORTANT): got command set DriftOrDonutAtIsotherm.WaitDepUndulation3 5.000000 minute 2018-04-02T07:28:03.307Z,1522654083.307 [CommandLine](IMPORTANT): got command set DriftOrDonutAtIsotherm.WaitDepUndulation5 5.000000 minute 2018-04-02T07:28:03.307Z,1522654083.307 [CommandLine](IMPORTANT): got command set DriftOrDonutAtIsotherm.WaitDepUndulation6 5.000000 minute 2018-04-02T07:28:03.308Z,1522654083.308 [CommandLine](IMPORTANT): got command set DriftOrDonutAtIsotherm.WaitDepUndulation8 5.000000 minute 2018-04-02T07:28:13.490Z,1522654093.490 [CommandLine](IMPORTANT): got command set DriftOrDonutAtIsotherm.WaitDepUndulation9 5.000000 minute 2018-04-02T07:28:13.490Z,1522654093.490 [CommandLine](IMPORTANT): got command set DriftOrDonutAtIsotherm.RudderAngleSpiral 10.000000 degree 2018-04-02T07:28:13.492Z,1522654093.492 [CommandLine](IMPORTANT): got command run 2018-04-02T07:28:13.535Z,1522654093.535 [CommandLine](IMPORTANT): Running 2018-04-02T07:28:13.550Z,1522654093.550 [MissionManager](IMPORTANT): Started mission DriftOrDonutAtIsotherm 2018-04-02T07:28:13.752Z,1522654093.752 [DriftOrDonutAtIsotherm:AbortDrift:B.AbortDrift](IMPORTANT): Acoustic timeout set to: 2.00 hours. 2018-04-02T07:31:27.630Z,1522654287.630 [DAT](FAULT): unknown deviceResponse_: 03.4 SPD:+00.6 2018-04-02T07:31:27.631Z,1522654287.631 [DAT](FAULT): unknown deviceResponse_: Header stats CRC:Fail SNR:05.5 CCERR:004 2018-04-02T07:33:45.524Z,1522654425.524 [DriftOrDonutAtIsotherm:FindPeakChlVertical:FindPeak:VerticalManeuver:LogGoDown:B](IMPORTANT): Go down from -0.328844 m 2018-04-02T07:51:39.299Z,1522655499.299 [DAT](FAULT): unknown deviceResponse_: 0.4 SPD:-01.2 2018-04-02T07:51:39.301Z,1522655499.301 [DAT](FAULT): unknown deviceResponse_: Header stats CRC:Fail SNR:04.1 CCERR:005 2018-04-02T08:05:02.200Z,1522656302.200 [DriftOrDonutAtIsotherm:FindPeakChlVertical:FindPeak:VerticalManeuver:LogGoUp:B](IMPORTANT): Go up from 260.075958 m 2018-04-02T08:06:06.903Z,1522656366.903 [DAT](FAULT): unknown deviceResponse_: tats SNR:20.0 MPD:03.3 SPD:+00.6 2018-04-02T08:06:06.904Z,1522656366.904 [DAT](FAULT): unknown deviceResponse_: Header stats CRC:Fail SNR:05.2 CCERR:005 2018-04-02T08:06:57.401Z,1522656417.401 [DriftOrDonutAtIsotherm:FindPeakChlVertical:FindPeak:VerticalManeuver:SetChlPeakTempDepth:L](IMPORTANT): Set peak-chl depth and temp. DepthLogged, ChlLogged, PeakChlDepthSet, PeakChlTemperatureSet, PeakChlSet = 255.836380 m , 0.107100 ug/l , 97.152725 m , 21.289171 degC , 0.540259 ug/l 2018-04-02T08:06:59.790Z,1522656419.790 [DriftOrDonutAtIsotherm:TakeSamples:FiringOnTemp:B](IMPORTANT): Taking ESP sample No. 1.000000 count . Target temp = 21.289171 degC . 2018-04-02T08:07:00.943Z,1522656420.943 [DriftOrDonutAtIsotherm:DampDown:A](IMPORTANT): Wait 80.000000 min for the depth undulation to damp down. 2018-04-02T08:14:58.127Z,1522656898.127 [DAT](FAULT): unknown deviceResponse_: 1 MPD:00.7 SPD:+12.3 2018-04-02T08:14:58.130Z,1522656898.130 [DAT](FAULT): unknown deviceResponse_: Header stats CRC:Fail SNR:05.9 CCERR:005 2018-04-02T08:15:43.737Z,1522656943.737 [DAT](FAULT): unknown deviceResponse_: C:Fail SNR:05.0 CCERR:006 2018-04-02T08:19:46.589Z,1522657186.589 [DAT](FAULT): unknown deviceResponse_: ats SNR:01.1 MPD:00.3 SPD:-00.6 2018-04-02T08:19:46.595Z,1522657186.595 [DAT](FAULT): unknown deviceResponse_: Header stats CRC:Fail SNR:05.6 CCERR:005 2018-04-02T08:20:32.165Z,1522657232.165 [DAT](FAULT): unknown deviceResponse_: .6 MPD:14.4 SPD:-00.9 2018-04-02T08:20:32.166Z,1522657232.166 [DAT](FAULT): unknown deviceResponse_: Header stats CRC:Fail SNR:04.4 CCERR:005 2018-04-02T08:24:04.560Z,1522657444.560 [DAT](FAULT): unknown deviceResponse_: tats CRC:Fail SNR:05.4 CCERR:005 2018-04-02T08:27:05.397Z,1522657625.397 [DAT](FAULT): unknown deviceResponse_: 9 2018-04-02T08:43:31.392Z,1522658611.392 [DAT](FAULT): unknown deviceResponse_: ion stats SNR:20.6 MPD:24.9 SPD:+00.3 2018-04-02T08:43:31.393Z,1522658611.393 [DAT](FAULT): unknown deviceResponse_: Header stats CRC:Fail SNR:05.0 CCERR:005 2018-04-02T08:43:32.186Z,1522658612.186 [DAT](FAULT): LCB fault: Software Overcurrent. 2018-04-02T08:50:25.441Z,1522659025.441 [DAT](FAULT): unknown deviceResponse_: -00.3 2018-04-02T08:53:47.792Z,1522659227.792 [DAT](FAULT): unknown deviceResponse_: s SNR:-2.8 MPD:02.9 SPD:-03.0 2018-04-02T08:53:47.795Z,1522659227.795 [DAT](FAULT): unknown deviceResponse_: Header stats CRC:Fail SNR:05.7 CCERR:005 2018-04-02T08:53:48.609Z,1522659228.609 [DAT](FAULT): LCB fault: Software Overcurrent. 2018-04-02T08:57:35.383Z,1522659455.383 [DAT](FAULT): unknown deviceResponse_: 0.6 MPD:47.3 SPD:+02.4 2018-04-02T08:57:35.384Z,1522659455.384 [DAT](FAULT): unknown deviceResponse_: Header stats CRC:Fail SNR:04.5 CCERR:005 2018-04-02T09:00:27.006Z,1522659627.006 [DAT](FAULT): unknown deviceResponse_: ts CRC:Fail SNR:04.2 CCERR:005 2018-04-02T09:02:58.996Z,1522659778.996 [DAT](FAULT): unknown deviceResponse_: CCERR:005 2018-04-02T09:17:57.829Z,1522660677.829 [DAT](FAULT): unknown deviceResponse_: 005 2018-04-02T09:24:51.817Z,1522661091.817 [DAT](FAULT): unknown deviceResponse_: PD:-02.8 2018-04-02T09:24:52.616Z,1522661092.616 [DAT](FAULT): LCB fault: Software Overcurrent. 2018-04-02T09:27:03.471Z,1522661223.471 [DriftOrDonutAtIsotherm:ESPSampling:TriggerESP:D](IMPORTANT): Trigger ESP sampling. DepthLogged, TempLogged, ChlLogged = 96.653374 m , 21.291986 degC , 0.511700 ug/l . 2018-04-02T09:27:04.961Z,1522661224.961 [ESPComponent](IMPORTANT): Powered ESP with command: ! echo 1 > /dev/loadA6 2018-04-02T09:27:04.962Z,1522661224.962 [ESPComponent](IMPORTANT): Starting PPPD with command:/sbin/pppd xonxoff asyncmap A0000 /dev/ttyTX1 linkname esp noauth local lock 115200 10.89.2.2:10.89.2.3 persist maxfail 0 holdoff 10 lcp-echo-interval 60 lcp-echo-failure 3 proxyarp ktune deflate 12 ms-dns 8.8.8.8 2018-04-02T09:27:05.022Z,1522661225.022 [CommandLine](IMPORTANT): got command ! echo 1 > /dev/loadA6 2018-04-02T09:27:05.370Z,1522661225.370 [ESPComponent](IMPORTANT): Waiting for ESP to connect (timeout=150.0000) 2018-04-02T09:27:37.267Z,1522661257.267 [ESPComponent](IMPORTANT): ESP has connected as client 2018-04-02T09:27:38.074Z,1522661258.074 [ESPComponent](IMPORTANT): ESP sampling sequence starting (sample #1) sampling state: S_WAITING_INITIAL_PROMPT 2018-04-02T09:27:38.544Z,1522661258.544 [DriftOrDonutAtIsotherm:ESPSampling:TriggerESP:F](IMPORTANT): Wait for ESP sampling to complete. 2018-04-02T09:27:39.267Z,1522661259.267 [ESPComponent](IMPORTANT): ESP sampling state: S_PREPARING_SHOW_LOG 2018-04-02T09:27:39.667Z,1522661259.667 [ESPComponent](IMPORTANT): ESP sampling state: S_PREPARING_SHOW_STATUS 2018-04-02T09:27:41.282Z,1522661261.282 [ESPComponent](IMPORTANT): ESP sampling state: S_LOADING_CARTRIDGE 2018-04-02T09:28:13.665Z,1522661293.665 [ESPComponent](IMPORTANT): ESP sampling state: S_FILTERING 2018-04-02T09:28:16.083Z,1522661296.083 [ESPComponent](IMPORTANT): ESP sampling state: S_WAITING_FOR_PAUSED 2018-04-02T09:36:56.998Z,1522661816.998 [DAT](FAULT): unknown deviceResponse_: 0 2018-04-02T09:36:57.762Z,1522661817.762 [DAT](FAULT): LCB fault: Software Overcurrent. 2018-04-02T10:31:25.801Z,1522665085.801 [DAT](FAULT): unknown deviceResponse_: R:22.1 MPD:03.7 SPD:-01.1 2018-04-02T10:31:25.802Z,1522665085.802 [DAT](FAULT): unknown deviceResponse_: Header stats CRC:Fail SNR:04.4 CCERR:005 2018-04-02T10:31:26.617Z,1522665086.617 [DAT](FAULT): LCB fault: Software Overcurrent. 2018-04-02T10:33:02.215Z,1522665182.215 [DAT](FAULT): unknown deviceResponse_: 16:18:15.9705 LVL= 32752, 32753, 32754, 32755, AGC= 61, IDX=46,-2.885,-2.748,-1.683, 2.494, PHS= 0.907, 1.057, 2.063, |v|= 1.035, [-0.653,-0.871,-1.424], RAW= 216.9, -52.6, CAL= 220.5, -52.0, ROT= 39.2, -52.0 2018-04-02T10:33:19.772Z,1522665199.772 [ESPComponent](IMPORTANT): ESP sampling state: S_PROCESSING 2018-04-02T10:33:22.165Z,1522665202.165 [ESPComponent](IMPORTANT): ESP sampling state: S_WAITING_FOR_PROCESSED 2018-04-02T10:40:08.613Z,1522665608.613 [DAT](FAULT): unknown deviceResponse_: sition stats SNR:-5.1 MPD:20.2 SPD:+06.0 2018-04-02T10:40:09.412Z,1522665609.412 [DAT](FAULT): LCB fault: Software Overcurrent. 2018-04-02T10:44:45.365Z,1522665885.365 [ESPComponent](IMPORTANT): ESP sampling state: S_STOPPING 2018-04-02T10:45:08.966Z,1522665908.966 [ESPComponent](IMPORTANT): ESP sampling sequence completed normally (sample #1) 2018-04-02T10:45:10.244Z,1522665910.244 [DriftOrDonutAtIsotherm:TakeSamples:FiringOnTemp:G](IMPORTANT): ESP sample No. 1.000000 count completed. 2018-04-02T10:45:16.273Z,1522665916.273 [DriftOrDonutAtIsotherm:TakeSamples:FiringOnTemp:B](IMPORTANT): Taking ESP sample No. 2.000000 count . Target temp = 21.289171 degC . 2018-04-02T10:45:17.481Z,1522665917.481 [DriftOrDonutAtIsotherm:DampDown:A](IMPORTANT): Wait 5.000000 min for the depth undulation to damp down. 2018-04-02T10:45:42.645Z,1522665942.645 [DAT](FAULT): unknown deviceResponse_: ts SNR:01.3 MPD:20.5 SPD:+00.0 2018-04-02T10:45:43.425Z,1522665943.425 [DAT](FAULT): LCB fault: Software Overcurrent. 2018-04-02T10:49:22.209Z,1522666162.209 [DAT](FAULT): unknown deviceResponse_: 00]<[03] DATA PACKET 2018-04-02T10:50:19.882Z,1522666219.882 [DriftOrDonutAtIsotherm:ESPSampling:TriggerESP:D](IMPORTANT): Trigger ESP sampling. DepthLogged, TempLogged, ChlLogged = 106.335381 m , 21.352411 degC , 0.523600 ug/l . 2018-04-02T10:50:21.383Z,1522666221.383 [ESPComponent](IMPORTANT): Powered ESP with command: ! echo 1 > /dev/loadA6 2018-04-02T10:50:21.384Z,1522666221.384 [ESPComponent](IMPORTANT): Starting PPPD with command:/sbin/pppd xonxoff asyncmap A0000 /dev/ttyTX1 linkname esp noauth local lock 115200 10.89.2.2:10.89.2.3 persist maxfail 0 holdoff 10 lcp-echo-interval 60 lcp-echo-failure 3 proxyarp ktune deflate 12 ms-dns 8.8.8.8 2018-04-02T10:50:21.399Z,1522666221.399 [CommandLine](IMPORTANT): got command ! echo 1 > /dev/loadA6 2018-04-02T10:50:21.573Z,1522666221.573 [ESPComponent](IMPORTANT): Waiting for ESP to connect (timeout=150.0000) 2018-04-02T10:50:54.696Z,1522666254.696 [ESPComponent](IMPORTANT): ESP has connected as client 2018-04-02T10:50:55.506Z,1522666255.506 [ESPComponent](IMPORTANT): ESP sampling sequence starting (sample #2) sampling state: S_WAITING_INITIAL_PROMPT 2018-04-02T10:50:55.998Z,1522666255.998 [DriftOrDonutAtIsotherm:ESPSampling:TriggerESP:F](IMPORTANT): Wait for ESP sampling to complete. 2018-04-02T10:50:56.298Z,1522666256.298 [ESPComponent](IMPORTANT): ESP sampling state: S_PREPARING_SHOW_LOG 2018-04-02T10:50:56.697Z,1522666256.697 [ESPComponent](IMPORTANT): ESP sampling state: S_PREPARING_SHOW_STATUS 2018-04-02T10:50:58.697Z,1522666258.697 [ESPComponent](IMPORTANT): ESP sampling state: S_LOADING_CARTRIDGE 2018-04-02T10:51:31.097Z,1522666291.097 [ESPComponent](IMPORTANT): ESP sampling state: S_FILTERING 2018-04-02T10:51:33.497Z,1522666293.497 [ESPComponent](IMPORTANT): ESP sampling state: S_WAITING_FOR_PAUSED 2018-04-02T10:54:04.359Z,1522666444.359 [DAT](FAULT): unknown deviceResponse_: 05 2018-04-02T11:31:45.940Z,1522668705.940 [DAT](FAULT): unknown deviceResponse_: stats CRC:Fail SNR:04.5 CCERR:005 2018-04-02T11:46:28.331Z,1522669588.331 [DAT](FAULT): unknown deviceResponse_: CRC:Fail SNR:04.3 CCERR:005 2018-04-02T11:46:29.131Z,1522669589.131 [DAT](FAULT): LCB fault: Software Overcurrent. 2018-04-02T11:48:00.931Z,1522669680.931 [CBIT](IMPORTANT): Beginning ground fault scan 2018-04-02T11:48:11.754Z,1522669691.754 [CBIT](IMPORTANT): Ground fault detected mA: CHAN A0 (Batt): 0.118759 CHAN A1 (24V): -0.020307 CHAN A2 (12V): 0.003132 CHAN A3 (5V): -0.002168 CHAN B0 (3.3V): -0.001099 CHAN B1 (3.15aV): -0.001587 CHAN B2 (3.15bV): -0.002033 CHAN B3 (GND): -0.003696 OPEN: 0.010185 Full Scale Calc: 4.765 mA, -1.589 mA 2018-04-02T11:56:37.114Z,1522670197.114 [ESPComponent](IMPORTANT): ESP sampling state: S_PROCESSING 2018-04-02T11:56:40.313Z,1522670200.313 [ESPComponent](IMPORTANT): ESP sampling state: S_WAITING_FOR_PROCESSED 2018-04-02T12:08:02.723Z,1522670882.723 [ESPComponent](IMPORTANT): ESP sampling state: S_STOPPING 2018-04-02T12:08:26.323Z,1522670906.323 [ESPComponent](IMPORTANT): ESP sampling sequence completed normally (sample #2) 2018-04-02T12:08:27.636Z,1522670907.636 [DriftOrDonutAtIsotherm:TakeSamples:FiringOnTemp:G](IMPORTANT): ESP sample No. 2.000000 count completed. 2018-04-02T12:08:33.616Z,1522670913.616 [DriftOrDonutAtIsotherm:TakeSamples:FiringOnTemp:B](IMPORTANT): Taking ESP sample No. 3.000000 count . Target temp = 21.289171 degC . 2018-04-02T12:08:34.827Z,1522670914.827 [DriftOrDonutAtIsotherm:DampDown:A](IMPORTANT): Wait 5.000000 min for the depth undulation to damp down. 2018-04-02T12:12:16.753Z,1522671136.753 [DAT](FAULT): unknown deviceResponse_: stats SNR:13.4 MPD:15.0 SPD:+02.7 2018-04-02T12:12:16.754Z,1522671136.754 [DAT](FAULT): unknown deviceResponse_: Header stats CRC:Fail SNR:07.9 CCERR:004 2018-04-02T12:13:37.635Z,1522671217.635 [DriftOrDonutAtIsotherm:ESPSampling:TriggerESP:D](IMPORTANT): Trigger ESP sampling. DepthLogged, TempLogged, ChlLogged = 110.235558 m , 21.275690 degC , 0.511700 ug/l . 2018-04-02T12:13:39.129Z,1522671219.129 [ESPComponent](IMPORTANT): Powered ESP with command: ! echo 1 > /dev/loadA6 2018-04-02T12:13:39.129Z,1522671219.129 [ESPComponent](IMPORTANT): Starting PPPD with command:/sbin/pppd xonxoff asyncmap A0000 /dev/ttyTX1 linkname esp noauth local lock 115200 10.89.2.2:10.89.2.3 persist maxfail 0 holdoff 10 lcp-echo-interval 60 lcp-echo-failure 3 proxyarp ktune deflate 12 ms-dns 8.8.8.8 2018-04-02T12:13:39.210Z,1522671219.210 [CommandLine](IMPORTANT): got command ! echo 1 > /dev/loadA6 2018-04-02T12:13:39.345Z,1522671219.345 [ESPComponent](IMPORTANT): Waiting for ESP to connect (timeout=150.0000) 2018-04-02T12:14:11.634Z,1522671251.634 [ESPComponent](IMPORTANT): ESP has connected as client 2018-04-02T12:14:12.442Z,1522671252.442 [ESPComponent](IMPORTANT): ESP sampling sequence starting (sample #3) sampling state: S_WAITING_INITIAL_PROMPT 2018-04-02T12:14:12.929Z,1522671252.929 [DriftOrDonutAtIsotherm:ESPSampling:TriggerESP:F](IMPORTANT): Wait for ESP sampling to complete. 2018-04-02T12:14:13.233Z,1522671253.233 [ESPComponent](IMPORTANT): ESP sampling state: S_PREPARING_SHOW_LOG 2018-04-02T12:14:13.634Z,1522671253.634 [ESPComponent](IMPORTANT): ESP sampling state: S_PREPARING_SHOW_STATUS 2018-04-02T12:14:15.635Z,1522671255.635 [ESPComponent](IMPORTANT): ESP sampling state: S_LOADING_CARTRIDGE 2018-04-02T12:14:48.034Z,1522671288.034 [ESPComponent](IMPORTANT): ESP sampling state: S_FILTERING 2018-04-02T12:14:50.433Z,1522671290.433 [ESPComponent](IMPORTANT): ESP sampling state: S_WAITING_FOR_PAUSED 2018-04-02T12:25:38.783Z,1522671938.783 [DAT](FAULT): unknown deviceResponse_: r stats CRC:Fail SNR:06.0 CCERR:005 2018-04-02T12:25:39.597Z,1522671939.597 [DAT](FAULT): LCB fault: Software Overcurrent. 2018-04-02T12:42:00.578Z,1522672920.578 [DAT](FAULT): unknown deviceResponse_: .0 SPD:+00.1 2018-04-02T12:42:00.579Z,1522672920.579 [DAT](FAULT): unknown deviceResponse_: Header stats CRC:Fail SNR:05.5 CCERR:005 2018-04-02T12:42:01.388Z,1522672921.388 [DAT](FAULT): LCB fault: Hardware Overcurrent Shutdown. Software Overcurrent. 2018-04-02T12:44:51.825Z,1522673091.825 [DAT](FAULT): unknown deviceResponse_: SPD:-00.9 2018-04-02T12:48:45.391Z,1522673325.391 [DAT](FAULT): unknown deviceResponse_: ats SNR:11.4 MPD:39.6 SPD:-00.6 2018-04-02T12:48:45.392Z,1522673325.392 [DAT](FAULT): unknown deviceResponse_: Header stats CRC:Fail SNR:04.3 CCERR:005 2018-04-02T12:53:18.233Z,1522673598.233 [DAT](FAULT): unknown deviceResponse_: +02.5 2018-04-02T12:58:06.985Z,1522673886.985 [DAT](FAULT): unknown deviceResponse_: ats SNR:02.4 MPD:17.2 SPD:+06.4 2018-04-02T12:58:06.986Z,1522673886.986 [DAT](FAULT): unknown deviceResponse_: Header stats CRC:Fail SNR:05.3 CCERR:006 2018-04-02T13:04:56.213Z,1522674296.213 [DAT](FAULT): unknown deviceResponse_: CERR:005 2018-04-02T13:05:43.398Z,1522674343.398 [DAT](FAULT): unknown deviceResponse_: Header stats CRC:Fail SNR:04.4 CCERR:005 2018-04-02T13:08:04.588Z,1522674484.588 [DAT](FAULT): unknown deviceResponse_: r stats CRC:Fail SNR:03.8 CCERR:005 2018-04-02T13:12:21.425Z,1522674741.425 [DAT](FAULT): unknown deviceResponse_: 2.4 2018-04-02T13:15:38.657Z,1522674938.657 [DAT](FAULT): unknown deviceResponse_: 05 2018-04-02T13:15:39.384Z,1522674939.384 [DAT](FAULT): LCB fault: Software Overcurrent. 2018-04-02T13:19:54.157Z,1522675194.157 [ESPComponent](IMPORTANT): ESP sampling state: S_PROCESSING 2018-04-02T13:19:56.557Z,1522675196.557 [ESPComponent](IMPORTANT): ESP sampling state: S_WAITING_FOR_PROCESSED 2018-04-02T13:23:30.596Z,1522675410.596 [DAT](FAULT): unknown deviceResponse_: .0 SPD:-02.4 2018-04-02T13:23:30.598Z,1522675410.598 [DAT](FAULT): unknown deviceResponse_: Header stats CRC:Fail SNR:06.4 CCERR:006 2018-04-02T13:25:20.996Z,1522675520.996 [DAT](FAULT): unknown deviceResponse_: cquisition stats SNR:34.4 MPD:03.3 SPD:-00.9 2018-04-02T13:26:32.586Z,1522675592.586 [DAT](FAULT): unknown deviceResponse_: SNR:11.4 MPD:32.3 SPD:-00.9 2018-04-02T13:26:32.588Z,1522675592.588 [DAT](FAULT): unknown deviceResponse_: Header stats CRC:Fail SNR:05.5 CCERR:005 2018-04-02T13:29:03.395Z,1522675743.395 [DAT](FAULT): unknown deviceResponse_: Tx time:19:12 2018-04-02T13:31:19.757Z,1522675879.757 [ESPComponent](IMPORTANT): ESP sampling state: S_STOPPING 2018-04-02T13:31:43.358Z,1522675903.358 [ESPComponent](IMPORTANT): ESP sampling sequence completed normally (sample #3) 2018-04-02T13:31:44.657Z,1522675904.657 [DriftOrDonutAtIsotherm:TakeSamples:FiringOnTemp:G](IMPORTANT): ESP sample No. 3.000000 count completed. 2018-04-02T13:31:51.038Z,1522675911.038 [DriftOrDonutAtIsotherm:TakeSamples:FiringOnDepth:C](IMPORTANT): Taking ESP sample No. 4.000000 count at target depth 250.000000 m . 2018-04-02T13:33:27.384Z,1522676007.384 [DAT](FAULT): unknown deviceResponse_: :32.1 SPD:-02.4 2018-04-02T13:47:02.193Z,1522676822.193 [DAT](FAULT): unknown deviceResponse_: sition stats SNR:17.3 MPD:41.4 SPD:-00.8 2018-04-02T13:47:02.195Z,1522676822.195 [DAT](FAULT): unknown deviceResponse_: Header stats CRC:Fail SNR:04.5 CCERR:005 2018-04-02T13:47:02.991Z,1522676822.991 [DAT](FAULT): LCB fault: Software Overcurrent. 2018-04-02T13:48:10.614Z,1522676890.614 [DAT](FAULT): unknown deviceResponse_: PD:03.3 SPD:-01.1 2018-04-02T13:48:10.616Z,1522676890.616 [DAT](FAULT): unknown deviceResponse_: Header stats CRC:Fail SNR:04.3 CCERR:005 2018-04-02T13:51:09.798Z,1522677069.798 [DAT](FAULT): unknown deviceResponse_: 08.0 CCERR:006 2018-04-02T13:54:30.566Z,1522677270.566 [ESPComponent](IMPORTANT): Powered ESP with command: ! echo 1 > /dev/loadA6 2018-04-02T13:54:30.567Z,1522677270.567 [ESPComponent](IMPORTANT): Starting PPPD with command:/sbin/pppd xonxoff asyncmap A0000 /dev/ttyTX1 linkname esp noauth local lock 115200 10.89.2.2:10.89.2.3 persist maxfail 0 holdoff 10 lcp-echo-interval 60 lcp-echo-failure 3 proxyarp ktune deflate 12 ms-dns 8.8.8.8 2018-04-02T13:54:30.643Z,1522677270.643 [CommandLine](IMPORTANT): got command ! echo 1 > /dev/loadA6 2018-04-02T13:54:30.819Z,1522677270.819 [ESPComponent](IMPORTANT): Waiting for ESP to connect (timeout=150.0000) 2018-04-02T13:55:03.481Z,1522677303.481 [ESPComponent](IMPORTANT): ESP has connected as client 2018-04-02T13:55:04.288Z,1522677304.288 [ESPComponent](IMPORTANT): ESP sampling sequence starting (sample #4) sampling state: S_WAITING_INITIAL_PROMPT 2018-04-02T13:55:04.774Z,1522677304.774 [DriftOrDonutAtIsotherm:SampleAtDepth:SampleWrapper:SampleESP:B](IMPORTANT): ESP sampling at 250.520889 m inwater with 0.137445 ug/l chlorophyll fluorescence. 2018-04-02T13:55:05.081Z,1522677305.081 [ESPComponent](IMPORTANT): ESP sampling state: S_PREPARING_SHOW_LOG 2018-04-02T13:55:05.481Z,1522677305.481 [ESPComponent](IMPORTANT): ESP sampling state: S_PREPARING_SHOW_STATUS 2018-04-02T13:55:07.481Z,1522677307.481 [ESPComponent](IMPORTANT): ESP sampling state: S_LOADING_CARTRIDGE 2018-04-02T13:55:39.883Z,1522677339.883 [ESPComponent](IMPORTANT): ESP sampling state: S_FILTERING 2018-04-02T13:55:42.281Z,1522677342.281 [ESPComponent](IMPORTANT): ESP sampling state: S_WAITING_FOR_PAUSED 2018-04-02T13:57:19.113Z,1522677439.113 [DAT](FAULT): unknown deviceResponse_: NR:05.1 CCERR:005 2018-04-02T13:57:19.919Z,1522677439.919 [DAT](FAULT): LCB fault: Software Overcurrent. 2018-04-02T13:58:49.941Z,1522677529.941 [DAT](FAULT): unknown deviceResponse_: SPD:-00.9 2018-04-02T14:03:38.719Z,1522677818.719 [DAT](FAULT): unknown deviceResponse_: SNR:06.0 CCERR:006 2018-04-02T14:12:49.918Z,1522678369.918 [DAT](FAULT): unknown deviceResponse_: 0.2 SPD:+02.5 2018-04-02T14:12:49.920Z,1522678369.920 [DAT](FAULT): unknown deviceResponse_: Header stats CRC:Fail SNR:05.1 CCERR:004 2018-04-02T14:16:53.109Z,1522678613.109 [DAT](FAULT): unknown deviceResponse_: ion stats SNR:03.6 MPD:35.8 SPD:-01.2 2018-04-02T14:16:53.111Z,1522678613.111 [DAT](FAULT): unknown deviceResponse_: Header stats CRC:Fail SNR:05.0 CCERR:006 2018-04-02T14:17:38.710Z,1522678658.710 [DAT](FAULT): unknown deviceResponse_: il SNR:04.8 CCERR:006 2018-04-02T14:20:40.728Z,1522678840.728 [DAT](FAULT): unknown deviceResponse_: quisition stats SNR:-1.0 MPD:00.0 SPD:-00.8 2018-04-02T14:20:40.734Z,1522678840.734 [DAT](FAULT): unknown deviceResponse_: Header stats CRC:Fail SNR:04.9 CCERR:005 2018-04-02T14:22:42.326Z,1522678962.326 [DAT](FAULT): unknown deviceResponse_: 05.0 CCERR:005 2018-04-02T14:23:57.919Z,1522679037.919 [DAT](FAULT): unknown deviceResponse_: l SNR:04.3 CCERR:005 2018-04-02T14:26:14.346Z,1522679174.346 [DAT](FAULT): unknown deviceResponse_: 02.2 2018-04-02T14:27:45.558Z,1522679265.558 [DAT](FAULT): unknown deviceResponse_: RR:005 2018-04-02T14:32:45.519Z,1522679565.519 [DAT](FAULT): unknown deviceResponse_: ion stats SNR:-2.1 MPD:24.8 SPD:-02.5 2018-04-02T14:32:45.521Z,1522679565.521 [DAT](FAULT): unknown deviceResponse_: Header stats CRC:Fail SNR:04.1 CCERR:005 2018-04-02T14:42:33.535Z,1522680153.535 [DAT](FAULT): unknown deviceResponse_: SNR:04.0 CCERR:005 2018-04-02T14:58:03.985Z,1522681083.985 [DAT](FAULT): unknown deviceResponse_: D:-00.6 2018-04-02T15:03:17.913Z,1522681397.913 [ESPComponent](IMPORTANT): ESP sampling state: S_PROCESSING 2018-04-02T15:03:20.315Z,1522681400.315 [ESPComponent](IMPORTANT): ESP sampling state: S_WAITING_FOR_PROCESSED 2018-04-02T15:04:48.788Z,1522681488.788 [DAT](FAULT): unknown deviceResponse_: 05 2018-04-02T15:04:49.540Z,1522681489.540 [DAT](FAULT): LCB fault: Software Overcurrent. 2018-04-02T15:10:29.551Z,1522681829.551 [DAT](FAULT): unknown deviceResponse_: +00.0 2018-04-02T15:10:29.552Z,1522681829.552 [DAT](FAULT): unknown deviceResponse_: Header stats CRC:Fail SNR:04.6 CCERR:005 2018-04-02T15:14:43.514Z,1522682083.514 [ESPComponent](IMPORTANT): ESP sampling state: S_STOPPING 2018-04-02T15:15:07.115Z,1522682107.115 [ESPComponent](IMPORTANT): ESP sampling sequence completed normally (sample #4) 2018-04-02T15:15:08.015Z,1522682108.015 [DriftOrDonutAtIsotherm:TakeSamples:FiringOnDepth:G](IMPORTANT): ESP sample No. 4.000000 count completed. 2018-04-02T15:15:14.397Z,1522682114.397 [DriftOrDonutAtIsotherm:TakeSamples:FiringOnDepth:C](IMPORTANT): Taking ESP sample No. 5.000000 count at target depth 250.000000 m . 2018-04-02T15:20:33.515Z,1522682433.515 [ESPComponent](IMPORTANT): Powered ESP with command: ! echo 1 > /dev/loadA6 2018-04-02T15:20:33.516Z,1522682433.516 [ESPComponent](IMPORTANT): Starting PPPD with command:/sbin/pppd xonxoff asyncmap A0000 /dev/ttyTX1 linkname esp noauth local lock 115200 10.89.2.2:10.89.2.3 persist maxfail 0 holdoff 10 lcp-echo-interval 60 lcp-echo-failure 3 proxyarp ktune deflate 12 ms-dns 8.8.8.8 2018-04-02T15:20:33.597Z,1522682433.597 [CommandLine](IMPORTANT): got command ! echo 1 > /dev/loadA6 2018-04-02T15:20:33.778Z,1522682433.778 [ESPComponent](IMPORTANT): Waiting for ESP to connect (timeout=150.0000) 2018-04-02T15:21:06.379Z,1522682466.379 [ESPComponent](IMPORTANT): ESP has connected as client 2018-04-02T15:21:07.180Z,1522682467.180 [ESPComponent](IMPORTANT): ESP sampling sequence starting (sample #5) sampling state: S_WAITING_INITIAL_PROMPT 2018-04-02T15:21:07.716Z,1522682467.716 [DriftOrDonutAtIsotherm:SampleAtDepth:SampleWrapper:SampleESP:B](IMPORTANT): ESP sampling at 250.475327 m inwater with 0.140420 ug/l chlorophyll fluorescence. 2018-04-02T15:21:07.981Z,1522682467.981 [ESPComponent](IMPORTANT): ESP sampling state: S_PREPARING_SHOW_LOG 2018-04-02T15:21:08.379Z,1522682468.379 [ESPComponent](IMPORTANT): ESP sampling state: S_PREPARING_SHOW_STATUS 2018-04-02T15:21:10.378Z,1522682470.378 [ESPComponent](IMPORTANT): ESP sampling state: S_LOADING_CARTRIDGE 2018-04-02T15:21:42.777Z,1522682502.777 [ESPComponent](IMPORTANT): ESP sampling state: S_FILTERING 2018-04-02T15:21:45.177Z,1522682505.177 [ESPComponent](IMPORTANT): ESP sampling state: S_WAITING_FOR_PAUSED 2018-04-02T15:41:50.807Z,1522683710.807 [DAT](FAULT): unknown deviceResponse_: ts SNR:-4.3 MPD:20.7 SPD:+00.6 2018-04-02T16:29:20.777Z,1522686560.777 [ESPComponent](IMPORTANT): ESP sampling state: S_PROCESSING 2018-04-02T16:29:23.177Z,1522686563.177 [ESPComponent](IMPORTANT): ESP sampling state: S_WAITING_FOR_PROCESSED 2018-04-02T16:40:46.377Z,1522687246.377 [ESPComponent](IMPORTANT): ESP sampling state: S_STOPPING 2018-04-02T16:41:09.980Z,1522687269.980 [ESPComponent](IMPORTANT): ESP sampling sequence completed normally (sample #5) 2018-04-02T16:41:10.887Z,1522687270.887 [DriftOrDonutAtIsotherm:TakeSamples:FiringOnDepth:G](IMPORTANT): ESP sample No. 5.000000 count completed. 2018-04-02T16:41:17.284Z,1522687277.284 [DriftOrDonutAtIsotherm:TakeSamples:FiringOnDepth:C](IMPORTANT): Taking ESP sample No. 6.000000 count at target depth 250.000000 m . 2018-04-02T16:47:13.588Z,1522687633.588 [ESPComponent](IMPORTANT): Powered ESP with command: ! echo 1 > /dev/loadA6 2018-04-02T16:47:13.589Z,1522687633.589 [ESPComponent](IMPORTANT): Starting PPPD with command:/sbin/pppd xonxoff asyncmap A0000 /dev/ttyTX1 linkname esp noauth local lock 115200 10.89.2.2:10.89.2.3 persist maxfail 0 holdoff 10 lcp-echo-interval 60 lcp-echo-failure 3 proxyarp ktune deflate 12 ms-dns 8.8.8.8 2018-04-02T16:47:13.632Z,1522687633.632 [CommandLine](IMPORTANT): got command ! echo 1 > /dev/loadA6 2018-04-02T16:47:13.813Z,1522687633.813 [ESPComponent](IMPORTANT): Waiting for ESP to connect (timeout=150.0000) 2018-04-02T16:47:48.520Z,1522687668.520 [ESPComponent](IMPORTANT): ESP has connected as client 2018-04-02T16:47:49.325Z,1522687669.325 [ESPComponent](IMPORTANT): ESP sampling sequence starting (sample #6) sampling state: S_WAITING_INITIAL_PROMPT 2018-04-02T16:47:49.819Z,1522687669.819 [DriftOrDonutAtIsotherm:SampleAtDepth:SampleWrapper:SampleESP:B](IMPORTANT): ESP sampling at 249.670715 m inwater with 0.143395 ug/l chlorophyll fluorescence. 2018-04-02T16:47:50.124Z,1522687670.124 [ESPComponent](IMPORTANT): ESP sampling state: S_PREPARING_SHOW_LOG 2018-04-02T16:47:50.521Z,1522687670.521 [ESPComponent](IMPORTANT): ESP sampling state: S_PREPARING_SHOW_STATUS 2018-04-02T16:47:52.521Z,1522687672.521 [ESPComponent](IMPORTANT): ESP sampling state: S_LOADING_CARTRIDGE 2018-04-02T16:48:24.922Z,1522687704.922 [ESPComponent](IMPORTANT): ESP sampling state: S_FILTERING 2018-04-02T16:48:27.321Z,1522687707.321 [ESPComponent](IMPORTANT): ESP sampling state: S_WAITING_FOR_PAUSED 2018-04-02T16:55:10.563Z,1522688110.563 [DAT](FAULT): unknown deviceResponse_: D:03.3 SPD:+01.6 2018-04-02T16:55:10.565Z,1522688110.565 [DAT](FAULT): unknown deviceResponse_: Header stats CRC:Fail SNR:04.9 CCERR:005 2018-04-02T16:55:11.357Z,1522688111.357 [DAT](FAULT): LCB fault: Software Overcurrent. 2018-04-02T16:55:56.164Z,1522688156.164 [DAT](FAULT): unknown deviceResponse_: s CRC:Fail SNR:05.3 CCERR:006 2018-04-02T17:13:26.577Z,1522689206.577 [DAT](FAULT): unknown deviceResponse_: ail SNR:04.9 CCERR:005 2018-04-02T17:13:27.357Z,1522689207.357 [DAT](FAULT): LCB fault: LCB Watchdog Reset. Invalid Command. 2018-04-02T17:16:58.972Z,1522689418.972 [DAT](FAULT): unknown deviceResponse_: CERR:005 2018-04-02T17:17:44.569Z,1522689464.569 [DAT](FAULT): unknown deviceResponse_: on stats SNR:10.1 MPD:03.3 SPD:-00.8 2018-04-02T17:17:44.570Z,1522689464.570 [DAT](FAULT): unknown deviceResponse_: Header stats CRC:Fail SNR:04.7 CCERR:005 2018-04-02T17:19:00.219Z,1522689540.219 [DAT](FAULT): unknown deviceResponse_: 0 SPD:-00.9 2018-04-02T17:23:07.781Z,1522689787.781 [DAT](FAULT): unknown deviceResponse_: MPD:02.7 SPD:-01.4 2018-04-02T17:23:07.782Z,1522689787.782 [DAT](FAULT): unknown deviceResponse_: Header stats CRC:Fail SNR:07.0 CCERR:006 2018-04-02T17:23:08.572Z,1522689788.572 [DAT](FAULT): LCB fault: Invalid Command. Hardware Overcurrent Shutdown. Current Limiter Activated. 2018-04-02T17:27:00.173Z,1522690020.173 [DAT](FAULT): unknown deviceResponse_: PD:00.3 SPD:-01.7 2018-04-02T17:27:00.174Z,1522690020.174 [DAT](FAULT): unknown deviceResponse_: Header stats CRC:Fail SNR:05.9 CCERR:004 2018-04-02T17:28:01.375Z,1522690081.375 [DAT](FAULT): unknown deviceResponse_: stats CRC:Fail SNR:04.5 CCERR:005 2018-04-02T17:28:02.189Z,1522690082.189 [DAT](FAULT): LCB fault: LCB Watchdog Reset. Invalid Command. Hardware Overcurrent Shutdown. Software Overcurrent. 2018-04-02T17:36:26.979Z,1522690586.979 [DAT](FAULT): unknown deviceResponse_: isition stats SNR:14.0 MPD:40.9 SPD:+00.0 2018-04-02T17:36:27.008Z,1522690587.008 [DAT](FAULT): unknown deviceResponse_: Header stats CRC:Fail SNR:06.0 CCERR:005 2018-04-02T17:36:27.775Z,1522690587.775 [DAT](FAULT): LCB fault: LCB Watchdog Reset. Hardware Overcurrent Shutdown. Current Limiter Activated. 2018-04-02T17:44:42.587Z,1522691082.587 [DAT](FAULT): unknown deviceResponse_: :-9.7 MPD:00.0 SPD:-01.2 2018-04-02T17:44:42.588Z,1522691082.588 [DAT](FAULT): unknown deviceResponse_: Header stats CRC:Fail SNR:06.6 CCERR:005 2018-04-02T17:47:43.810Z,1522691263.810 [DAT](FAULT): unknown deviceResponse_: SNR:11.7 MPD:46.1 SPD:-03.0 2018-04-02T17:48:11.977Z,1522691291.977 [CBIT](IMPORTANT): Beginning ground fault scan 2018-04-02T17:48:22.819Z,1522691302.819 [CBIT](IMPORTANT): Ground fault detected mA: CHAN A0 (Batt): 0.116876 CHAN A1 (24V): -0.021930 CHAN A2 (12V): 0.002893 CHAN A3 (5V): -0.002028 CHAN B0 (3.3V): -0.000493 CHAN B1 (3.15aV): -0.002199 CHAN B2 (3.15bV): -0.001473 CHAN B3 (GND): -0.004294 OPEN: 0.009987 Full Scale Calc: 4.765 mA, -1.589 mA 2018-04-02T17:51:47.401Z,1522691507.401 [DAT](FAULT): unknown deviceResponse_: ts SNR:11.0 MPD:49.6 SPD:+01.6 2018-04-02T17:51:47.402Z,1522691507.402 [DAT](FAULT): unknown deviceResponse_: Header stats CRC:Fail SNR:05.5 CCERR:005 2018-04-02T17:53:30.965Z,1522691610.965 [ESPComponent](IMPORTANT): ESP sampling state: S_PROCESSING 2018-04-02T17:53:33.366Z,1522691613.366 [ESPComponent](IMPORTANT): ESP sampling state: S_WAITING_FOR_PROCESSED 2018-04-02T17:56:21.006Z,1522691781.006 [DAT](FAULT): unknown deviceResponse_: stats SNR:07.8 MPD:49.8 SPD:+02.5 2018-04-02T17:56:21.008Z,1522691781.008 [DAT](FAULT): unknown deviceResponse_: Header stats CRC:Fail SNR:05.7 CCERR:005 2018-04-02T18:02:55.421Z,1522692175.421 [DAT](FAULT): unknown deviceResponse_: 1.7 2018-04-02T18:02:56.208Z,1522692176.208 [DAT](FAULT): LCB fault: Software Overcurrent. 2018-04-02T18:04:56.565Z,1522692296.565 [ESPComponent](IMPORTANT): ESP sampling state: S_STOPPING 2018-04-02T18:05:20.167Z,1522692320.167 [ESPComponent](IMPORTANT): ESP sampling sequence completed normally (sample #6) 2018-04-02T18:05:21.031Z,1522692321.031 [DriftOrDonutAtIsotherm:TakeSamples:FiringOnDepth:G](IMPORTANT): ESP sample No. 6.000000 count completed. 2018-04-02T18:05:27.469Z,1522692327.469 [DriftOrDonutAtIsotherm:TakeSamples:FiringOnDepth:C](IMPORTANT): Taking ESP sample No. 7.000000 count at target depth 50.000000 m . 2018-04-02T18:06:59.014Z,1522692419.014 [DAT](FAULT): unknown deviceResponse_: r stats CRC:Fail SNR:05.1 CCERR:005 2018-04-02T18:13:17.814Z,1522692797.814 [DAT](FAULT): unknown deviceResponse_: 23:53:42.3457 LVL= 32752, 32241, 17778, 32755, AGC= 68, IDX= 438, 0.25, 2.989,-2.614,-1.446,-1.587, PHS=-1.703,-1.011, 0.097,054, [-1.246,-0.959, 0.925], RAW= 232.4, 30.5, CAL= 238.7, 42.1, ROT= 57.4, 42.1 2018-04-02T18:32:25.781Z,1522693945.781 [ESPComponent](IMPORTANT): Powered ESP with command: ! echo 1 > /dev/loadA6 2018-04-02T18:32:25.781Z,1522693945.781 [ESPComponent](IMPORTANT): Starting PPPD with command:/sbin/pppd xonxoff asyncmap A0000 /dev/ttyTX1 linkname esp noauth local lock 115200 10.89.2.2:10.89.2.3 persist maxfail 0 holdoff 10 lcp-echo-interval 60 lcp-echo-failure 3 proxyarp ktune deflate 12 ms-dns 8.8.8.8 2018-04-02T18:32:25.846Z,1522693945.846 [CommandLine](IMPORTANT): got command ! echo 1 > /dev/loadA6 2018-04-02T18:32:25.997Z,1522693945.997 [ESPComponent](IMPORTANT): Waiting for ESP to connect (timeout=150.0000) 2018-04-02T18:32:58.686Z,1522693978.686 [ESPComponent](IMPORTANT): ESP has connected as client 2018-04-02T18:32:59.487Z,1522693979.487 [ESPComponent](IMPORTANT): ESP sampling sequence starting (sample #7) sampling state: S_WAITING_INITIAL_PROMPT 2018-04-02T18:32:59.975Z,1522693979.975 [DriftOrDonutAtIsotherm:SampleAtDepth:SampleWrapper:SampleESP:B](IMPORTANT): ESP sampling at 50.103951 m inwater with 0.207655 ug/l chlorophyll fluorescence. 2018-04-02T18:33:00.285Z,1522693980.285 [ESPComponent](IMPORTANT): ESP sampling state: S_PREPARING_SHOW_LOG 2018-04-02T18:33:00.688Z,1522693980.688 [ESPComponent](IMPORTANT): ESP sampling state: S_PREPARING_SHOW_STATUS 2018-04-02T18:33:02.690Z,1522693982.690 [ESPComponent](IMPORTANT): ESP sampling state: S_LOADING_CARTRIDGE 2018-04-02T18:33:35.085Z,1522694015.085 [ESPComponent](IMPORTANT): ESP sampling state: S_FILTERING 2018-04-02T18:33:37.486Z,1522694017.486 [ESPComponent](IMPORTANT): ESP sampling state: S_WAITING_FOR_PAUSED 2018-04-02T18:35:33.920Z,1522694133.920 [DAT](FAULT): unknown deviceResponse_: R:05.3 CCERR:005 2018-04-02T18:35:34.717Z,1522694134.717 [DAT](FAULT): LCB fault: Software Overcurrent. 2018-04-02T18:39:10.731Z,1522694350.731 [DAT](FAULT): unknown deviceResponse_: sition stats SNR:08.6 MPD:11.0 SPD:-00.9 2018-04-02T18:42:43.924Z,1522694563.924 [DAT](FAULT): unknown deviceResponse_: sition stats SNR:04.0 MPD:11.4 SPD:+05.2 2018-04-02T18:42:43.945Z,1522694563.945 [DAT](FAULT): unknown deviceResponse_: Header stats CRC:Fail SNR:04.8 CCERR:005 2018-04-02T18:42:44.723Z,1522694564.723 [DAT](FAULT): LCB fault: Software Overcurrent. 2018-04-02T18:43:47.529Z,1522694627.529 [DAT](FAULT): failed to initialize; deviceResponse_ loaded: 00:23:06.9882 LVL= 2544, 2369, 2274, 2467, AGC= 14, IDX= 914, 0.07,-1.523,-1.904,-0.548,-2.677, PHS= 1.157, 0.789, 2.085, |v|= 1.060, [-0.280,-1.122,-1.425], RAW= 194.0, -50.9, CAL= 195.7, -50.5, ROT= 14.4, -50.5 Rx Time:00:23:06.9882 range request Tx time:00:23:08.5911 user:1>, available: Rx Time:00:23:50.2384 00:23:50.2384 LVL= 23024, 18545, 10418, 21907, AGC= 51, IDX= 210,-0.29,-0.406,-0.296, 1.480, 1.356, PHS=-1.759,-1.636, 0.080, |v|= 1.231, [-0.981,-1.486, 1.172], RAW= 213.4, 33.3, CAL= 216.8, 46.4, ROT= 35.5, 46.4 bearing request Tx time:00:23:51.8413 P 2018-04-02T18:51:30.327Z,1522695090.327 [DAT](FAULT): unknown deviceResponse_: tats SNR:00.1 MPD:16.4 SPD:+08.1 2018-04-02T18:51:30.328Z,1522695090.328 [DAT](FAULT): unknown deviceResponse_: Header stats CRC:Fail SNR:05.4 CCERR:005 2018-04-02T18:51:31.115Z,1522695091.115 [DAT](FAULT): LCB fault: Software Overcurrent. 2018-04-02T18:53:21.530Z,1522695201.530 [DAT](FAULT): unknown deviceResponse_: ats SNR:-4.0 MPD:24.6 SPD:+00.0 2018-04-02T19:00:07.519Z,1522695607.519 [DAT](FAULT): unknown deviceResponse_: R:03.6 MPD:13.1 SPD:-02.4 2018-04-02T19:00:07.520Z,1522695607.520 [DAT](FAULT): unknown deviceResponse_: Header stats CRC:Fail SNR:04.5 CCERR:005 2018-04-02T19:03:55.519Z,1522695835.519 [DAT](FAULT): unknown deviceResponse_: 5 CCERR:005 2018-04-02T19:07:47.536Z,1522696067.536 [DAT](FAULT): unknown deviceResponse_: MPD:00.6 SPD:-02.2 2018-04-02T19:21:23.918Z,1522696883.918 [DAT](FAULT): unknown deviceResponse_: on stats SNR:-11.7 MPD:04.1 SPD:-00.4 2018-04-02T19:21:23.919Z,1522696883.919 [DAT](FAULT): unknown deviceResponse_: Header stats CRC:Fail SNR:04.6 CCERR:005 2018-04-02T19:22:24.721Z,1522696944.721 [DAT](FAULT): unknown deviceResponse_: Header stats CRC:Fail SNR:05.1 CCERR:005 2018-04-02T19:26:12.316Z,1522697172.316 [DAT](FAULT): unknown deviceResponse_: SPD:+08.8 2018-04-02T19:26:12.317Z,1522697172.317 [DAT](FAULT): unknown deviceResponse_: Header stats CRC:Fail SNR:04.7 CCERR:005 2018-04-02T19:32:15.969Z,1522697535.969 [DAT](FAULT): unknown deviceResponse_: R:003 2018-04-02T19:32:16.726Z,1522697536.726 [DAT](FAULT): LCB fault: Software Overcurrent. 2018-04-02T19:38:41.097Z,1522697921.097 [ESPComponent](IMPORTANT): ESP sampling state: S_PROCESSING 2018-04-02T19:38:43.497Z,1522697923.497 [ESPComponent](IMPORTANT): ESP sampling state: S_WAITING_FOR_PROCESSED 2018-04-02T19:39:51.939Z,1522697991.939 [DAT](FAULT): unknown deviceResponse_: s SNR:-18.6 MPD:04.1 SPD:+00.9 2018-04-02T19:39:51.940Z,1522697991.940 [DAT](FAULT): unknown deviceResponse_: Header stats CRC:Fail SNR:06.1 CCERR:005 2018-04-02T19:40:37.529Z,1522698037.529 [DAT](FAULT): unknown deviceResponse_: SNR:04.4 CCERR:006 2018-04-02T19:49:10.336Z,1522698550.336 [DAT](FAULT): unknown deviceResponse_: .0 CCERR:005 2018-04-02T19:50:06.701Z,1522698606.701 [ESPComponent](IMPORTANT): ESP sampling state: S_STOPPING 2018-04-02T19:50:30.302Z,1522698630.302 [ESPComponent](IMPORTANT): ESP sampling sequence completed normally (sample #7) 2018-04-02T19:50:31.215Z,1522698631.215 [DriftOrDonutAtIsotherm:TakeSamples:FiringOnDepth:G](IMPORTANT): ESP sample No. 7.000000 count completed. 2018-04-02T19:50:37.610Z,1522698637.610 [DriftOrDonutAtIsotherm:TakeSamples:FiringOnDepth:C](IMPORTANT): Taking ESP sample No. 8.000000 count at target depth 50.000000 m . 2018-04-02T19:55:48.335Z,1522698948.335 [ESPComponent](IMPORTANT): Powered ESP with command: ! echo 1 > /dev/loadA6 2018-04-02T19:55:48.336Z,1522698948.336 [ESPComponent](IMPORTANT): Starting PPPD with command:/sbin/pppd xonxoff asyncmap A0000 /dev/ttyTX1 linkname esp noauth local lock 115200 10.89.2.2:10.89.2.3 persist maxfail 0 holdoff 10 lcp-echo-interval 60 lcp-echo-failure 3 proxyarp ktune deflate 12 ms-dns 8.8.8.8 2018-04-02T19:55:48.418Z,1522698948.418 [CommandLine](IMPORTANT): got command ! echo 1 > /dev/loadA6 2018-04-02T19:55:48.561Z,1522698948.561 [ESPComponent](IMPORTANT): Waiting for ESP to connect (timeout=150.0000) 2018-04-02T19:56:20.839Z,1522698980.839 [ESPComponent](IMPORTANT): ESP has connected as client 2018-04-02T19:56:21.640Z,1522698981.640 [ESPComponent](IMPORTANT): ESP sampling sequence starting (sample #8) sampling state: S_WAITING_INITIAL_PROMPT 2018-04-02T19:56:22.175Z,1522698982.175 [DriftOrDonutAtIsotherm:SampleAtDepth:SampleWrapper:SampleESP:B](IMPORTANT): ESP sampling at 49.594120 m inwater with 0.217175 ug/l chlorophyll fluorescence. 2018-04-02T19:56:22.437Z,1522698982.437 [ESPComponent](IMPORTANT): ESP sampling state: S_PREPARING_SHOW_LOG 2018-04-02T19:56:22.839Z,1522698982.839 [ESPComponent](IMPORTANT): ESP sampling state: S_PREPARING_SHOW_STATUS 2018-04-02T19:56:24.838Z,1522698984.838 [ESPComponent](IMPORTANT): ESP sampling state: S_LOADING_CARTRIDGE 2018-04-02T19:56:27.238Z,1522698987.238 [ESPComponent](IMPORTANT): ESP sampling state: S_STOPPING 2018-04-02T19:56:29.638Z,1522698989.638 [ESPComponent](CRITICAL): ESP sampling sequence terminated with error: In state S_LOADING_CARTRIDGE got exception while awaiting result for cmd='Cmd.loadCartridge' exception=<>. Elapsed time since command issued: 2.4003 2018-04-02T19:56:29.888Z,1522698989.888 [CommandLine](FAULT): Scheduling is paused 2018-04-02T19:56:30.586Z,1522698990.586 [WetLabsBB2FL](FAULT): LCB fault: Software Overcurrent. 2018-04-02T19:56:31.606Z,1522698991.606 [MissionManager](IMPORTANT): Started mission Default 2018-04-02T19:56:32.333Z,1522698992.333 [Aanderaa_O2](FAULT): LCB fault: Software Overcurrent. 2018-04-02T20:05:57.881Z,1522699557.881 [DAT](FAULT): unknown deviceResponse_: isition stats SNR:10.3 MPD:04.4 SPD:+00.8 2018-04-02T20:05:57.882Z,1522699557.882 [DAT](FAULT): unknown deviceResponse_: Header stats CRC:Fail SNR:04.3 CCERR:004 2018-04-02T20:09:39.632Z,1522699779.632 [NAL9602](IMPORTANT): SBD MO Status=1, MOMSN=9616, MT Status=1, MTMSN=415 2018-04-02T20:09:40.163Z,1522699780.163 [CommandLine](IMPORTANT): got command ! nohup summarizeESP 2018-04-02T20:10:01.537Z,1522699801.537 [DAT](FAULT): unknown deviceResponse_: PD:-00.9 2018-04-02T20:14:21.537Z,1522700061.537 [NAL9602](IMPORTANT): SBD MO Status=1, MOMSN=9625, MT Status=1, MTMSN=416 2018-04-02T20:14:22.056Z,1522700062.056 [CommandLine](IMPORTANT): got command ! ESPsummary 2018-04-02T20:14:22.477Z,1522700062.477 [CommandLine](IMPORTANT): @23:27:11.16 Selecting Cartridge 11 @00:32:38.24 Cmd::Paused in FILTERING -- CartridgeTimeLimit Expired during Sample Pump move after sampling 1622.6ml @00:50:28.49 Selecting Cartridge 10 @01:55:55.66 Cmd::Paused in FILTERING -- CartridgeTimeLimit Expired during Sample Pump move after sampling 1579.7ml @02:13:45.54 Selecting Cartridge 9 @03:19:12.58 Cmd::Paused in FILTERING -- CartridgeTimeLimit Expired during Sample Pump move after sampling 1564.2ml @03:54:37.23 Selecting Cartridge 8 @03:57:27.34 Failed Filtering after 0.0ml because Cartridge (or plumbing) leaks @03:57:27.36 Selecting Cartridge 7 @05:02:36.47 Cmd::Paused in FILTERING -- CartridgeTimeLimit Expired during Sample Pump move after sampling 1427.7ml @05:20:40.46 Selecting Cartridge 6 @05:23:30.30 Failed Filtering after 0.0ml because Cartridge (or plumbing) leaks @05:23:30.32 Selecting Cartridge 5 @06:28:39.40 Cmd::Paused in FILTERING -- CartridgeTimeLimit Expired during Sample Pump move after sampling 1475.3ml @06:47:22.60 Selecting Cartridge 4 @07:52:49.54 Cmd::Paused in FILTERING -- CartridgeTimeLimit Expired during Sample Pump move after sampling 1510.4ml @08:32:32.58 Selecting Cartridge 3 @09:37:59.54 Cmd::Paused in FILTERING -- CartridgeTimeLimit Expired during Sample Pump move after sampling 1615.3ml 2018-04-02T20:22:33.586Z,1522700553.586 [NAL9602](FAULT): Verify xmit timeout failure. 2018-04-02T20:22:43.244Z,1522700563.244 [DAT](FAULT): unknown deviceResponse_: 2.4 SPD:-01.2 2018-04-02T20:23:54.527Z,1522700634.527 [NAL9602](IMPORTANT): SBD MO Status=0, MOMSN=9642, MT Status=1, MTMSN=417 2018-04-02T20:23:55.175Z,1522700635.175 [CommandLine](IMPORTANT): got command configSet DAT.loadAtStartup 0.000000 bool persist 2018-04-02T20:23:55.176Z,1522700635.176 [CommandLine](IMPORTANT): configSet DAT.loadAtStartup requires a restart to take effect. 2018-04-02T20:26:49.745Z,1522700809.745 [NAL9602](IMPORTANT): SBD MO Status=1, MOMSN=9644, MT Status=1, MTMSN=418 2018-04-02T20:26:50.250Z,1522700810.250 [CommandLine](IMPORTANT): got command restart application