2018-01-28T04:25:43.377Z,1517113543.377 [Supervisor](IMPORTANT): Reading configuration overrides from Data/persisted.cfg 2018-01-28T04:25:46.397Z,1517113546.397 [SBIT](IMPORTANT): git: 2018-01-24 2018-01-28T04:25:46.398Z,1517113546.398 [SBIT](IMPORTANT): Kernel Release: 2.6.27.8 2018-01-28T04:27:21.885Z,1517113641.885 [SBIT](IMPORTANT): Beginning Startup BIT 2018-01-28T04:27:21.893Z,1517113641.893 [CBIT](IMPORTANT): Beginning ground fault scan 2018-01-28T04:27:32.885Z,1517113652.885 [CBIT](IMPORTANT): No ground fault detected mA: CHAN A0 (Batt): -0.000540 CHAN A1 (24V): -0.004927 CHAN A2 (12V): 0.007343 CHAN A3 (5V): -0.002277 CHAN B0 (3.3V): -0.002682 CHAN B1 (3.15aV): -0.003091 CHAN B2 (3.15bV): -0.002129 CHAN B3 (GND): -0.006874 OPEN: 0.009335 Full Scale Calc: 4.765 mA, -1.589 mA 2018-01-28T04:28:15.825Z,1517113695.825 [SBIT](IMPORTANT): SBIT PASSED 2018-01-28T04:28:16.225Z,1517113696.225 [MissionManager](IMPORTANT): Started mission Startup 2018-01-28T04:30:17.219Z,1517113817.219 [MissionManager](IMPORTANT): Started mission Default 2018-01-28T04:31:09.562Z,1517113869.562 [NAL9602](FAULT): Verify xmit timeout failure. 2018-01-28T04:32:12.792Z,1517113932.792 [DAT](FAULT): unknown deviceResponse_: $Low SNR acquistion detected 2018-01-28T04:32:12.793Z,1517113932.793 [DAT](FAULT): unknown deviceResponse_: Acquisition stats SNR:11.2 MPD:31.8 SPD:+00.0 2018-01-28T04:32:51.259Z,1517113971.259 [NAL9602](IMPORTANT): SBD MO Status=1, MOMSN=5263, MT Status=1, MTMSN=369 2018-01-28T04:32:51.838Z,1517113971.838 [CommandLine](IMPORTANT): got command configSet list 2018-01-28T04:32:51.838Z,1517113971.838 [CommandLine](IMPORTANT): Listing configuration overrides from Data/persisted.cfg 2018-01-28T04:32:51.839Z,1517113971.839 [CommandLine](IMPORTANT): BPC1.loadAtStartup=0 bool; 2018-01-28T04:32:51.839Z,1517113971.839 [CommandLine](IMPORTANT): CBIT.abortDepth=298 meter; 2018-01-28T04:32:51.839Z,1517113971.839 [CommandLine](IMPORTANT): CBIT.stopDepth=280 meter; 2018-01-28T04:32:51.839Z,1517113971.839 [CommandLine](IMPORTANT): Depth_Keller.loadAtStartup=0 bool; 2018-01-28T04:32:51.839Z,1517113971.839 [CommandLine](IMPORTANT): DropWeight.loadAtStartup=0 bool; 2018-01-28T04:32:51.839Z,1517113971.839 [CommandLine](IMPORTANT): Express linearApproximation mass_concentration_of_chlorophyll_in_sea_water 0.250000 microgram_per_liter; 2018-01-28T04:32:51.839Z,1517113971.839 [CommandLine](IMPORTANT): VerticalControl.buoyancyNeutral=70 cubic_centimeter; 2018-01-28T04:32:51.839Z,1517113971.839 [CommandLine](IMPORTANT): VerticalControl.massDefault=-19 millimeter; 2018-01-28T04:32:51.840Z,1517113971.840 [CommandLine](IMPORTANT): VerticalControl.massPositionLimitAft=-19 millimeter; 2018-01-28T04:36:35.649Z,1517114195.649 [DAT](FAULT): unknown deviceResponse_: $Low SNR acquistion detected 2018-01-28T04:36:35.651Z,1517114195.651 [DAT](FAULT): unknown deviceResponse_: Acquisition stats SNR:-4.3 MPD:23.5 SPD:-00.9 2018-01-28T04:38:48.575Z,1517114328.575 [DAT](FAULT): unknown deviceResponse_: $Low SNR acquistion detected 2018-01-28T04:38:48.583Z,1517114328.583 [DAT](FAULT): unknown deviceResponse_: Acquisition stats SNR:10.3 MPD:00.8 SPD:-02.2 2018-01-28T04:40:20.839Z,1517114420.839 [DataOverHttps](IMPORTANT): SBD MTMSN=20180128T043946 2018-01-28T04:40:27.760Z,1517114427.760 [CommandLine](IMPORTANT): got command show best depth 2018-01-28T04:40:27.761Z,1517114427.761 [CommandLine](IMPORTANT): depth best is CTD_Seabird.depth 2018-01-28T04:40:27.761Z,1517114427.761 [CommandLine](IMPORTANT): got command get depth 2018-01-28T04:40:27.762Z,1517114427.762 [CommandLine](IMPORTANT): depth 0.426825 m 2018-01-28T04:42:04.567Z,1517114524.567 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 11.782604 min 2018-01-28T04:45:04.800Z,1517114704.800 [DAT](FAULT): unknown deviceResponse_: $Low SNR acquistion detected 2018-01-28T04:45:04.810Z,1517114704.810 [DAT](FAULT): unknown deviceResponse_: Acquisition stats SNR:20.4 MPD:03.6 SPD:-00.6 2018-01-28T04:47:11.020Z,1517114831.020 [DAT](FAULT): unknown deviceResponse_: tats SNR:02.5 MPD:20.3 SPD:-00.4 2018-01-28T04:47:11.024Z,1517114831.024 [DAT](FAULT): unknown deviceResponse_: Header stats CRC:Fail SNR:03.0 CCERR:005 2018-01-28T04:49:15.714Z,1517114955.714 [DAT](FAULT): unknown deviceResponse_: $Low SNR acquistion detected 2018-01-28T04:49:15.715Z,1517114955.715 [DAT](FAULT): unknown deviceResponse_: Acquisition stats SNR:13.3 MPD:04.1 SPD:-01.7 2018-01-28T04:49:56.134Z,1517114996.134 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 19.641882 min 2018-01-28T04:51:21.124Z,1517115081.124 [DAT](FAULT): unknown deviceResponse_: $Low SNR acquistion detected 2018-01-28T04:51:21.125Z,1517115081.125 [DAT](FAULT): unknown deviceResponse_: Acquisition stats SNR:-1.4 MPD:46.8 SPD:-00.3 2018-01-28T04:55:02.520Z,1517115302.520 [DataOverHttps](IMPORTANT): SBD MOMSN=7764536, MTMSN=20180128T045427 2018-01-28T04:55:08.782Z,1517115308.782 [CommandLine](IMPORTANT): got command schedule asap "load Science/depth_sequence_sampling.xml;set DonutAtDepthSequence.NumESPSamplers 3 count;set DonutAtDepthSequence.MissionTimeout 6 hour;set DonutAtDepthSequence.AcousticTrackingTimeout 2 hour" 31my3 1 2.000000 2018-01-28T04:55:08.782Z,1517115308.782 [CommandLine](IMPORTANT): Scheduling command #1 of 2 with id=31my3 2018-01-28T04:55:08.783Z,1517115308.783 [CommandLine](IMPORTANT): Scheduled #1 (#1 of 2 with id='31my3'): "load Science/depth_sequence_sampling.xml;set DonutAtDepthSequence.NumESPSamplers 3 count;set DonutAtDepthSequence.MissionTimeout 6 hour;set DonutAtDepthSequence.AcousticTrackingTimeout 2 hour" ASAP 2018-01-28T04:55:10.295Z,1517115310.295 [DataOverHttps](IMPORTANT): SBD MTMSN=20180128T045434 2018-01-28T04:55:16.182Z,1517115316.182 [CommandLine](IMPORTANT): got command schedule asap "set DonutAtDepthSequence.MaxDepth 20 meter;set DonutAtDepthSequence.Depth1 7 meter;set DonutAtDepthSequence.Depth2 7 meter;set DonutAtDepthSequence.Depth3 7 meter;run " 31my3 2 2.000000 2018-01-28T04:55:16.182Z,1517115316.182 [CommandLine](IMPORTANT): Scheduling command #2 of 2 with id=31my3 2018-01-28T04:55:16.183Z,1517115316.183 [CommandLine](IMPORTANT): Scheduled #2 (#2 of 2 with id='31my3'): "set DonutAtDepthSequence.MaxDepth 20 meter;set DonutAtDepthSequence.Depth1 7 meter;set DonutAtDepthSequence.Depth2 7 meter;set DonutAtDepthSequence.Depth3 7 meter;run " ASAP 2018-01-28T04:55:16.376Z,1517115316.376 [CommandLine](IMPORTANT): got command load ./Missions/Science/depth_sequence_sampling.xml 2018-01-28T04:55:26.071Z,1517115326.071 [CommandLine](IMPORTANT): Loaded ./Missions/Science/depth_sequence_sampling.xml 2018-01-28T04:55:36.734Z,1517115336.734 [CommandLine](IMPORTANT): got command set DonutAtDepthSequence.NumESPSamplers 3.000000 count 2018-01-28T04:55:36.735Z,1517115336.735 [CommandLine](IMPORTANT): got command set DonutAtDepthSequence.MissionTimeout 6.000000 hour 2018-01-28T04:55:36.735Z,1517115336.735 [CommandLine](IMPORTANT): got command set DonutAtDepthSequence.AcousticTrackingTimeout 2.000000 hour 2018-01-28T04:55:45.152Z,1517115345.152 [CommandLine](IMPORTANT): got command set DonutAtDepthSequence.MaxDepth 20.000000 meter 2018-01-28T04:55:45.153Z,1517115345.153 [CommandLine](IMPORTANT): got command set DonutAtDepthSequence.Depth1 7.000000 meter 2018-01-28T04:55:45.154Z,1517115345.154 [CommandLine](IMPORTANT): got command set DonutAtDepthSequence.Depth2 7.000000 meter 2018-01-28T04:55:45.155Z,1517115345.155 [CommandLine](IMPORTANT): got command set DonutAtDepthSequence.Depth3 7.000000 meter 2018-01-28T04:55:45.155Z,1517115345.155 [CommandLine](IMPORTANT): got command run 2018-01-28T04:55:45.160Z,1517115345.160 [CommandLine](IMPORTANT): Running 2018-01-28T04:55:48.214Z,1517115348.214 [MissionManager](IMPORTANT): Started mission DonutAtDepthSequence 2018-01-28T04:55:48.390Z,1517115348.390 [DonutAtDepthSequence:AbortDrift:B.AbortDrift](IMPORTANT): Acoustic timeout set to: 2.00 hours. 2018-01-28T04:55:50.923Z,1517115350.923 [DonutAtDepthSequence:TakeSamples:Firing:C](IMPORTANT): Taking ESP sample No. 1.000000 count at depth 7.000000 m . 2018-01-28T04:58:47.969Z,1517115527.969 [DAT](FAULT): unknown deviceResponse_: .1 2018-01-28T05:00:11.919Z,1517115611.919 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-01-28T05:05:03.465Z,1517115903.465 [DAT](FAULT): unknown deviceResponse_: $Low SNR acquistion detected 2018-01-28T05:05:03.467Z,1517115903.467 [DAT](FAULT): unknown deviceResponse_: Acquisition stats SNR:10.9 MPD:03.4 SPD:+00.0 2018-01-28T05:18:25.907Z,1517116705.907 [ESPComponent](IMPORTANT): Powered ESP with command: ! echo 1 > /dev/loadA6 2018-01-28T05:18:25.908Z,1517116705.908 [ESPComponent](IMPORTANT): Starting PPPD with command:/sbin/pppd xonxoff asyncmap A0000 /dev/ttyTX1 linkname esp noauth local lock 115200 134.89.95.66:134.89.95.12 persist maxfail 0 holdoff 10 lcp-echo-interval 60 lcp-echo-failure 3 proxyarp ktune deflate 12 ms-dns 134.89.10.32 ms-dns 134.89.10.10 2018-01-28T05:18:25.974Z,1517116705.974 [CommandLine](IMPORTANT): got command ! echo 1 > /dev/loadA6 2018-01-28T05:18:26.366Z,1517116706.366 [ESPComponent](IMPORTANT): Waiting for ESP to connect (timeout=150.0000) 2018-01-28T05:18:58.621Z,1517116738.621 [ESPComponent](IMPORTANT): ESP has connected as client 2018-01-28T05:18:59.428Z,1517116739.428 [ESPComponent](IMPORTANT): ESP sampling sequence starting (sample #1) sampling state: S_WAITING_INITIAL_PROMPT 2018-01-28T05:18:59.926Z,1517116739.926 [DonutAtDepthSequence:SampleAtDepth:SampleWrapper:SampleESP:B](IMPORTANT): ESP sampling at 6.303027 m inwater with 1.923912 ug/l chlorophyll fluorescence. 2018-01-28T05:19:00.623Z,1517116740.623 [ESPComponent](IMPORTANT): ESP sampling state: S_PREPARING_SHOW_LOG 2018-01-28T05:19:01.024Z,1517116741.024 [ESPComponent](IMPORTANT): ESP sampling state: S_PREPARING_SHOW_STATUS 2018-01-28T05:19:02.624Z,1517116742.624 [ESPComponent](IMPORTANT): ESP sampling state: S_LOADING_CARTRIDGE 2018-01-28T05:19:35.427Z,1517116775.427 [ESPComponent](IMPORTANT): ESP sampling state: S_FILTERING 2018-01-28T05:19:37.826Z,1517116777.826 [ESPComponent](IMPORTANT): ESP sampling state: S_WAITING_FOR_PAUSED 2018-01-28T05:24:31.897Z,1517117071.897 [DAT](FAULT): unknown deviceResponse_: .1 2018-01-28T05:24:32.664Z,1517117072.664 [DAT](FAULT): LCB fault: Software Overcurrent. 2018-01-28T05:59:37.031Z,1517119177.031 [ESPComponent](IMPORTANT): ESP sampling state: S_PROCESSING 2018-01-28T05:59:39.427Z,1517119179.427 [ESPComponent](IMPORTANT): ESP sampling state: S_WAITING_FOR_PROCESSED 2018-01-28T06:11:46.621Z,1517119906.621 [ESPComponent](IMPORTANT): ESP sampling state: S_STOPPING 2018-01-28T06:12:10.225Z,1517119930.225 [ESPComponent](IMPORTANT): ESP sampling sequence completed normally (sample #1) 2018-01-28T06:12:11.084Z,1517119931.084 [DonutAtDepthSequence:TakeSamples:Firing:G](IMPORTANT): ESP sample No. 1.000000 count completed. 2018-01-28T06:12:15.558Z,1517119935.558 [DonutAtDepthSequence:TakeSamples:Firing:C](IMPORTANT): Taking ESP sample No. 2.000000 count at depth 7.000000 m . 2018-01-28T06:23:45.825Z,1517120625.825 [ESPComponent](IMPORTANT): Powered ESP with command: ! echo 1 > /dev/loadA6 2018-01-28T06:23:45.825Z,1517120625.825 [ESPComponent](IMPORTANT): Starting PPPD with command:/sbin/pppd xonxoff asyncmap A0000 /dev/ttyTX1 linkname esp noauth local lock 115200 134.89.95.66:134.89.95.12 persist maxfail 0 holdoff 10 lcp-echo-interval 60 lcp-echo-failure 3 proxyarp ktune deflate 12 ms-dns 134.89.10.32 ms-dns 134.89.10.10 2018-01-28T06:23:45.918Z,1517120625.918 [CommandLine](IMPORTANT): got command ! echo 1 > /dev/loadA6 2018-01-28T06:23:46.012Z,1517120626.012 [ESPComponent](IMPORTANT): Waiting for ESP to connect (timeout=150.0000) 2018-01-28T06:24:18.621Z,1517120658.621 [ESPComponent](IMPORTANT): ESP has connected as client 2018-01-28T06:24:19.431Z,1517120659.431 [ESPComponent](IMPORTANT): ESP sampling sequence starting (sample #2) sampling state: S_WAITING_INITIAL_PROMPT 2018-01-28T06:24:19.909Z,1517120659.909 [DonutAtDepthSequence:SampleAtDepth:SampleWrapper:SampleESP:B](IMPORTANT): ESP sampling at 6.640507 m inwater with 1.924501 ug/l chlorophyll fluorescence. 2018-01-28T06:24:20.222Z,1517120660.222 [ESPComponent](IMPORTANT): ESP sampling state: S_PREPARING_SHOW_LOG 2018-01-28T06:24:20.628Z,1517120660.628 [ESPComponent](IMPORTANT): ESP sampling state: S_PREPARING_SHOW_STATUS 2018-01-28T06:24:22.623Z,1517120662.623 [ESPComponent](IMPORTANT): ESP sampling state: S_LOADING_CARTRIDGE 2018-01-28T06:24:55.425Z,1517120695.425 [ESPComponent](IMPORTANT): ESP sampling state: S_FILTERING 2018-01-28T06:24:57.823Z,1517120697.823 [ESPComponent](IMPORTANT): ESP sampling state: S_WAITING_FOR_PAUSED 2018-01-28T06:43:27.482Z,1517121807.482 [DAT](FAULT): unknown deviceResponse_: 00.4 MPD:03.5 SPD:+06.0 2018-01-28T06:43:27.483Z,1517121807.483 [DAT](FAULT): unknown deviceResponse_: Header stats CRC:Fail SNR:04.9 CCERR:005 2018-01-28T06:56:04.651Z,1517122564.651 [DAT](FAULT): unknown deviceResponse_: il SNR:05.1 CCERR:005 2018-01-28T07:01:09.027Z,1517122869.027 [ESPComponent](IMPORTANT): ESP sampling state: S_PROCESSING 2018-01-28T07:01:11.425Z,1517122871.425 [ESPComponent](IMPORTANT): ESP sampling state: S_WAITING_FOR_PROCESSED 2018-01-28T07:13:18.623Z,1517123598.623 [ESPComponent](IMPORTANT): ESP sampling state: S_STOPPING 2018-01-28T07:13:42.226Z,1517123622.226 [ESPComponent](IMPORTANT): ESP sampling sequence completed normally (sample #2) 2018-01-28T07:13:43.099Z,1517123623.099 [DonutAtDepthSequence:TakeSamples:Firing:G](IMPORTANT): ESP sample No. 2.000000 count completed. 2018-01-28T07:13:47.483Z,1517123627.483 [DonutAtDepthSequence:TakeSamples:Firing:C](IMPORTANT): Taking ESP sample No. 3.000000 count at depth 7.000000 m . 2018-01-28T07:25:16.225Z,1517124316.225 [ESPComponent](IMPORTANT): Powered ESP with command: ! echo 1 > /dev/loadA6 2018-01-28T07:25:16.225Z,1517124316.225 [ESPComponent](IMPORTANT): Starting PPPD with command:/sbin/pppd xonxoff asyncmap A0000 /dev/ttyTX1 linkname esp noauth local lock 115200 134.89.95.66:134.89.95.12 persist maxfail 0 holdoff 10 lcp-echo-interval 60 lcp-echo-failure 3 proxyarp ktune deflate 12 ms-dns 134.89.10.32 ms-dns 134.89.10.10 2018-01-28T07:25:16.309Z,1517124316.309 [CommandLine](IMPORTANT): got command ! echo 1 > /dev/loadA6 2018-01-28T07:25:16.399Z,1517124316.399 [ESPComponent](IMPORTANT): Waiting for ESP to connect (timeout=150.0000) 2018-01-28T07:25:49.105Z,1517124349.105 [ESPComponent](IMPORTANT): ESP has connected as client 2018-01-28T07:25:49.907Z,1517124349.907 [ESPComponent](IMPORTANT): ESP sampling sequence starting (sample #3) sampling state: S_WAITING_INITIAL_PROMPT 2018-01-28T07:25:50.369Z,1517124350.369 [DonutAtDepthSequence:SampleAtDepth:SampleWrapper:SampleESP:B](IMPORTANT): ESP sampling at 6.908504 m inwater with 1.909302 ug/l chlorophyll fluorescence. 2018-01-28T07:25:50.705Z,1517124350.705 [ESPComponent](IMPORTANT): ESP sampling state: S_PREPARING_SHOW_LOG 2018-01-28T07:25:51.108Z,1517124351.108 [ESPComponent](IMPORTANT): ESP sampling state: S_PREPARING_SHOW_STATUS 2018-01-28T07:25:53.106Z,1517124353.106 [ESPComponent](IMPORTANT): ESP sampling state: S_LOADING_CARTRIDGE 2018-01-28T07:26:25.905Z,1517124385.905 [ESPComponent](IMPORTANT): ESP sampling state: S_FILTERING 2018-01-28T07:26:28.305Z,1517124388.305 [ESPComponent](IMPORTANT): ESP sampling state: S_WAITING_FOR_PAUSED 2018-01-28T08:08:55.265Z,1517126935.265 [ESPComponent](IMPORTANT): ESP sampling state: S_PROCESSING 2018-01-28T08:08:57.665Z,1517126937.665 [ESPComponent](IMPORTANT): ESP sampling state: S_WAITING_FOR_PROCESSED 2018-01-28T08:21:04.864Z,1517127664.864 [ESPComponent](IMPORTANT): ESP sampling state: S_STOPPING 2018-01-28T08:21:28.466Z,1517127688.466 [ESPComponent](IMPORTANT): ESP sampling sequence completed normally (sample #3) 2018-01-28T08:21:29.328Z,1517127689.328 [DonutAtDepthSequence:TakeSamples:Firing:G](IMPORTANT): ESP sample No. 3.000000 count completed. 2018-01-28T08:21:30.933Z,1517127690.933 [DonutAtDepthSequence:MissionCompleted:A](IMPORTANT): Completed sampling. Stopping mission. 2018-01-28T08:21:31.349Z,1517127691.349 [CommandLine](IMPORTANT): got command stop 2018-01-28T08:21:31.350Z,1517127691.350 [CommandLine](IMPORTANT): Scheduling is paused 2018-01-28T08:21:31.730Z,1517127691.730 [MissionManager](IMPORTANT): Started mission Default 2018-01-28T08:21:32.194Z,1517127692.194 [BuoyancyServo](FAULT): Reading outside of valid range:879.000000 2018-01-28T08:21:32.194Z,1517127692.194 [BuoyancyServo](FAULT): Buoyancy engine reporting null position 2018-01-28T08:21:38.151Z,1517127698.151 [BuoyancyServo](FAULT): Reading outside of valid range:879.000000 2018-01-28T08:21:38.151Z,1517127698.151 [BuoyancyServo](FAULT): Buoyancy engine reporting null position 2018-01-28T08:21:44.177Z,1517127704.177 [BuoyancyServo](FAULT): Reading outside of valid range:880.000000 2018-01-28T08:21:44.177Z,1517127704.177 [BuoyancyServo](FAULT): Buoyancy engine reporting null position 2018-01-28T08:21:50.177Z,1517127710.177 [BuoyancyServo](FAULT): Reading outside of valid range:880.000000 2018-01-28T08:21:50.177Z,1517127710.177 [BuoyancyServo](FAULT): Buoyancy engine reporting null position 2018-01-28T08:21:56.158Z,1517127716.158 [BuoyancyServo](FAULT): Reading outside of valid range:879.000000 2018-01-28T08:21:56.158Z,1517127716.158 [BuoyancyServo](FAULT): Buoyancy engine reporting null position 2018-01-28T08:21:56.164Z,1517127716.164 [CBIT](CRITICAL): Hardware Fault in component: BuoyancyServo 2018-01-28T08:21:56.555Z,1517127716.555 [CommandLine](FAULT): Scheduling is paused 2018-01-28T08:24:00.157Z,1517127840.157 [BuoyancyServo](FAULT): Reading outside of valid range:881.000000 2018-01-28T08:24:00.157Z,1517127840.157 [BuoyancyServo](FAULT): Buoyancy engine reporting null position 2018-01-28T08:24:08.693Z,1517127848.693 [BuoyancyServo](FAULT): Reading outside of valid range:880.000000 2018-01-28T08:24:08.693Z,1517127848.693 [BuoyancyServo](FAULT): Buoyancy engine reporting null position 2018-01-28T08:24:14.685Z,1517127854.685 [BuoyancyServo](FAULT): Reading outside of valid range:879.000000 2018-01-28T08:24:14.685Z,1517127854.685 [BuoyancyServo](FAULT): Buoyancy engine reporting null position 2018-01-28T08:24:20.670Z,1517127860.670 [BuoyancyServo](FAULT): Reading outside of valid range:879.000000 2018-01-28T08:24:20.670Z,1517127860.670 [BuoyancyServo](FAULT): Buoyancy engine reporting null position 2018-01-28T08:24:26.685Z,1517127866.685 [BuoyancyServo](FAULT): Reading outside of valid range:879.000000 2018-01-28T08:24:26.685Z,1517127866.685 [BuoyancyServo](FAULT): Buoyancy engine reporting null position 2018-01-28T08:24:26.691Z,1517127866.691 [CBIT](CRITICAL): Hardware Fault in component: BuoyancyServo 2018-01-28T08:26:30.618Z,1517127990.618 [BuoyancyServo](FAULT): Reading outside of valid range:879.000000 2018-01-28T08:26:30.618Z,1517127990.618 [BuoyancyServo](FAULT): Buoyancy engine reporting null position 2018-01-28T08:26:36.627Z,1517127996.627 [BuoyancyServo](FAULT): Reading outside of valid range:877.000000 2018-01-28T08:26:36.628Z,1517127996.628 [BuoyancyServo](FAULT): Buoyancy engine reporting null position 2018-01-28T08:26:42.630Z,1517128002.630 [BuoyancyServo](FAULT): Reading outside of valid range:879.000000 2018-01-28T08:26:42.631Z,1517128002.631 [BuoyancyServo](FAULT): Buoyancy engine reporting null position 2018-01-28T08:26:48.623Z,1517128008.623 [BuoyancyServo](FAULT): Reading outside of valid range:879.000000 2018-01-28T08:26:48.623Z,1517128008.623 [BuoyancyServo](FAULT): Buoyancy engine reporting null position 2018-01-28T08:26:54.641Z,1517128014.641 [BuoyancyServo](FAULT): Reading outside of valid range:879.000000 2018-01-28T08:26:54.641Z,1517128014.641 [BuoyancyServo](FAULT): Buoyancy engine reporting null position 2018-01-28T08:26:54.651Z,1517128014.651 [CBIT](CRITICAL): Hardware Fault in component: BuoyancyServo 2018-01-28T08:28:58.641Z,1517128138.641 [BuoyancyServo](FAULT): Reading outside of valid range:863.000000 2018-01-28T08:28:58.641Z,1517128138.641 [BuoyancyServo](FAULT): Buoyancy engine reporting null position 2018-01-28T08:29:04.657Z,1517128144.657 [BuoyancyServo](FAULT): Reading outside of valid range:865.000000 2018-01-28T08:29:04.657Z,1517128144.657 [BuoyancyServo](FAULT): Buoyancy engine reporting null position 2018-01-28T08:29:10.649Z,1517128150.649 [BuoyancyServo](FAULT): Reading outside of valid range:869.000000 2018-01-28T08:29:10.649Z,1517128150.649 [BuoyancyServo](FAULT): Buoyancy engine reporting null position 2018-01-28T08:29:19.749Z,1517128159.749 [BuoyancyServo](FAULT): Reading outside of valid range:865.000000 2018-01-28T08:29:19.750Z,1517128159.750 [BuoyancyServo](FAULT): Buoyancy engine reporting null position 2018-01-28T08:29:25.750Z,1517128165.750 [BuoyancyServo](FAULT): Reading outside of valid range:879.000000 2018-01-28T08:29:25.750Z,1517128165.750 [BuoyancyServo](FAULT): Buoyancy engine reporting null position 2018-01-28T08:29:25.755Z,1517128165.755 [CBIT](CRITICAL): Hardware Fault in component: BuoyancyServo 2018-01-28T08:31:09.556Z,1517128269.556 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 9.624294 min 2018-01-28T08:31:29.597Z,1517128289.597 [BuoyancyServo](FAULT): Reading outside of valid range:864.000000 2018-01-28T08:31:29.597Z,1517128289.597 [BuoyancyServo](FAULT): Buoyancy engine reporting null position 2018-01-28T08:31:38.467Z,1517128298.467 [DataOverHttps](IMPORTANT): SBD MTMSN=20180128T083042 2018-01-28T08:31:38.573Z,1517128298.573 [BuoyancyServo](FAULT): Reading outside of valid range:864.000000 2018-01-28T08:31:38.573Z,1517128298.573 [BuoyancyServo](FAULT): Buoyancy engine reporting null position 2018-01-28T08:31:45.411Z,1517128305.411 [CommandLine](IMPORTANT): got command configSet BuoyancyServo.limitLo 800.000000 count persist 2018-01-28T08:33:02.490Z,1517128382.490 [DataOverHttps](IMPORTANT): SBD MOMSN=7764702, MTMSN=20180128T083206 2018-01-28T08:33:08.587Z,1517128388.587 [CommandLine](IMPORTANT): got command restart application