2017-02-10T00:03:58.675Z,1486685038.675 [CommandLine](IMPORTANT): got command restart logs
2017-02-10T00:05:57.388Z,1486685157.388 [CTD_Seabird](FAULT): LCB fault:  Software Overcurrent.
2017-02-10T00:05:58.908Z,1486685158.908 [CTD_Seabird](FAULT): LCB fault:  Software Overcurrent.
2017-02-10T00:06:00.240Z,1486685160.240 [CTD_Seabird](FAULT): LCB fault:  Software Overcurrent.
2017-02-10T00:06:01.688Z,1486685161.688 [CTD_Seabird](FAULT): LCB fault:  Software Overcurrent.
2017-02-10T00:06:03.004Z,1486685163.004 [CTD_Seabird](FAULT): LCB fault:  Software Overcurrent.
2017-02-10T00:06:03.166Z,1486685163.166 [CBIT](FAULT): Hardware Fault in component: CTD_Seabird
2017-02-10T00:06:57.188Z,1486685217.188 [DataOverHttps](IMPORTANT): SBD MTMSN=20170210T000950
2017-02-10T00:07:03.505Z,1486685223.505 [CommandLine](IMPORTANT): got command load ./Missions/Science/drift_at_chlpeak_sampling_InAboveBelow.xml
2017-02-10T00:07:05.941Z,1486685225.941 [CommandLine](IMPORTANT): Loaded ./Missions/Science/drift_at_chlpeak_sampling_InAboveBelow.xml
2017-02-10T00:07:13.718Z,1486685233.718 [CommandLine](IMPORTANT): got command set DriftAtChlPeak.MissionTimeout 3.500000 hour
2017-02-10T00:07:13.719Z,1486685233.719 [CommandLine](IMPORTANT): got command set DriftAtChlPeak.AcousticTimeout 3.000000 hour
2017-02-10T00:07:13.719Z,1486685233.719 [CommandLine](IMPORTANT): got command set DriftAtChlPeak.NumESPSamplers 3.000000 none
2017-02-10T00:07:13.720Z,1486685233.720 [CommandLine](IMPORTANT): got command set DriftAtChlPeak.VertDist5 4.000000 meter
2017-02-10T00:07:13.721Z,1486685233.721 [CommandLine](IMPORTANT): got command run 
2017-02-10T00:07:13.724Z,1486685233.724 [CommandLine](IMPORTANT): Running 
2017-02-10T00:07:13.819Z,1486685233.819 [MissionManager](IMPORTANT): Started mission DriftAtChlPeak
2017-02-10T00:11:04.360Z,1486685464.360 [CBIT](IMPORTANT): Beginning ground fault scan
2017-02-10T00:11:14.734Z,1486685474.734 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.005870
CHAN A1 (24V): -0.000792
CHAN A2 (12V): 0.003633
CHAN A3 (5V): 0.000997
CHAN B0 (3.3V): -0.000034
CHAN B1 (3.15aV): -0.000773
CHAN B2 (3.15bV): -0.000260
CHAN B3 (GND): -0.003237
OPEN: 0.007533
Full Scale Calc: 4.765 mA, -1.589 mA
2017-02-10T00:22:10.752Z,1486686130.752 [BuoyancyServo](FAULT): Invalid EZ Servo response:""
2017-02-10T00:22:10.752Z,1486686130.752 [BuoyancyServo](FAULT): Buoyancy engine reporting null position
2017-02-10T00:22:59.447Z,1486686179.447 [Radio_Surface](FAULT): LCB fault:  Software Overcurrent.
2017-02-10T00:53:01.929Z,1486687981.929 [DriftAtChlPeak:ChlPeakHolding:F:E:B](IMPORTANT): Go up from 30.038530 m 
2017-02-10T00:55:41.834Z,1486688141.834 [DriftAtChlPeak:ChlPeakHolding:G:G](IMPORTANT): Set PeakChlDepthSet. DepthLogged, ChlLogged, PeakChlDepthSet, PeakChlSet = 25.772709 m , 0.476000 ug/l , 4.897179 m , 0.942933 ug/l 
2017-02-10T01:03:23.392Z,1486688603.392 [DriftAtChlPeak:N:B](IMPORTANT): Wait for the depth undulation to damp down.
2017-02-10T01:03:25.016Z,1486688605.016 [DriftAtChlPeak:ChlPeakHolding:D:G](IMPORTANT): Hold depth. DepthLogged, ChlLogged, PeakChlDepthSet, PeakChlSet = 4.930066 m , 0.809200 ug/l , 4.897179 m , 0.942933 ug/l .
2017-02-10T01:13:25.796Z,1486689205.796 [DriftAtChlPeak:O:B](IMPORTANT): Taking ESP sample No. 1.000000 n/a : 0.000000 m from the chlorophyll layer.
2017-02-10T01:13:27.014Z,1486689207.014 [DriftAtChlPeak:ESPSampling:TriggerESP:C](IMPORTANT): Trigger ESP sampling. DepthLogged, ChlLogged, PeakChlDepthSet, PeakChlSet = 5.197972 m , 0.761600 ug/l , 4.897179 m , 0.942933 ug/l .
2017-02-10T01:13:28.531Z,1486689208.531 [ESPComponent](IMPORTANT): Starting PPPD with command:/sbin/pppd xonxoff asyncmap A0000 /dev/ttyTX1 linkname esp noauth local lock 115200 134.89.95.66:134.89.95.12 persist maxfail 0 holdoff 10 lcp-echo-interval 60 lcp-echo-failure 3 proxyarp ktune deflate 12 ms-dns 134.89.10.32 ms-dns 134.89.10.10
2017-02-10T01:13:28.746Z,1486689208.746 [ESPComponent](IMPORTANT): Waiting for ESP to connect (timeout=150.0000)
2017-02-10T01:14:15.007Z,1486689255.007 [ESPComponent](IMPORTANT): ESP has connected as client
2017-02-10T01:14:15.873Z,1486689255.873 [ESPComponent](IMPORTANT): ESP sampling sequence starting (sample #4)  sampling state: S_WAITING_INITIAL_PROMPT
2017-02-10T01:14:16.303Z,1486689256.303 [DriftAtChlPeak:ESPSampling:TriggerESP:E](IMPORTANT): Wait for ESP sampling to complete.
2017-02-10T01:14:16.607Z,1486689256.607 [ESPComponent](IMPORTANT): ESP sampling state: S_PREPARING_SHOW_LOG
2017-02-10T01:14:17.007Z,1486689257.007 [ESPComponent](IMPORTANT): ESP sampling state: S_PREPARING_SHOW_STATUS
2017-02-10T01:14:19.014Z,1486689259.014 [ESPComponent](IMPORTANT): ESP sampling state: S_LOADING_CARTRIDGE
2017-02-10T01:14:38.207Z,1486689278.207 [ESPComponent](IMPORTANT): ESP sampling state: S_FILTERING
2017-02-10T01:14:40.607Z,1486689280.607 [ESPComponent](IMPORTANT): ESP sampling state: S_WAITING_FOR_PAUSED
2017-02-10T01:29:43.407Z,1486690183.407 [ESPComponent](IMPORTANT): ESP sampling state: S_PROCESSING
2017-02-10T01:29:45.807Z,1486690185.807 [ESPComponent](IMPORTANT): ESP sampling state: S_WAITING_FOR_PROCESSED
2017-02-10T01:41:51.408Z,1486690911.408 [ESPComponent](IMPORTANT): ESP sampling state: S_STOPPING
2017-02-10T01:42:12.608Z,1486690932.608 [ESPComponent](IMPORTANT): ESP sampling sequence completed normally (sample #4)
2017-02-10T01:42:13.360Z,1486690933.360 [DriftAtChlPeak:ESPSampling:B](IMPORTANT): ESP sample No. 1.000000 n/a completed.
2017-02-10T01:42:15.218Z,1486690935.218 [DriftAtChlPeak:O:F](IMPORTANT): Surfacing to report ESP results to shore.
2017-02-10T01:49:43.464Z,1486691383.464 [DriftAtChlPeak:NeedComms:C:A_Timeout:A](IMPORTANT): first GPS update timeout
2017-02-10T01:56:06.049Z,1486691766.049 [NAL9602](FAULT): GPS failed to acquire within timeout.
2017-02-10T01:56:06.841Z,1486691766.841 [NAL9602](FAULT): LCB fault:  Software Overcurrent.
2017-02-10T02:25:08.095Z,1486693508.095 [DriftAtChlPeak:ChlPeakHolding:F:E:B](IMPORTANT): Go up from 10.898407 m 
2017-02-10T02:26:31.701Z,1486693591.701 [DriftAtChlPeak:ChlPeakHolding:G:G](IMPORTANT): Set PeakChlDepthSet. DepthLogged, ChlLogged, PeakChlDepthSet, PeakChlSet = 9.318833 m , 0.809200 ug/l , 9.827181 m , 0.985173 ug/l 
2017-02-10T03:37:14.523Z,1486697834.523 [MissionManager](IMPORTANT): Started mission Default
2017-02-10T03:37:15.284Z,1486697835.284 [CTD_Seabird](FAULT): LCB fault:  Software Overcurrent.
2017-02-10T03:37:16.792Z,1486697836.792 [CTD_Seabird](FAULT): LCB fault:  Software Overcurrent.
2017-02-10T03:37:18.270Z,1486697838.270 [CTD_Seabird](FAULT): LCB fault:  Software Overcurrent.
2017-02-10T03:37:20.057Z,1486697840.057 [CTD_Seabird](FAULT): LCB fault:  Software Overcurrent.