2018-01-23T00:05:28.209Z,1516665928.209 [Supervisor](DEBUG): Initializing supervisor. 2018-01-23T00:05:28.212Z,1516665928.212 [SyncHandler](DEBUG): Created PCaller Thread at 404514E0 2018-01-23T00:05:28.212Z,1516665928.212 [SyncHandler](INFO): Protected caller Thread ID is 2267 2018-01-23T00:05:28.213Z,1516665928.213 [ComponentRegistry](DEBUG): Component "controlThread" handled in its own thread. 2018-01-23T00:05:28.214Z,1516665928.214 [controlThread ThreadHandler](DEBUG): Created PCaller Thread at 404814E0 2018-01-23T00:05:28.214Z,1516665928.214 [controlThread ThreadHandler](INFO): Protected caller Thread ID is 2268 2018-01-23T00:05:28.217Z,1516665928.217 [ComponentRegistry](DEBUG): SyncComponent "CycleStarter" handled in the control thread. 2018-01-23T00:05:28.227Z,1516665928.227 [ComponentRegistry](DEBUG): Component "CommandLine" handled in its own thread. 2018-01-23T00:05:28.228Z,1516665928.228 [CommandLine ThreadHandler](DEBUG): Created PCaller Thread at 404B14E0 2018-01-23T00:05:28.229Z,1516665928.229 [CommandLine ThreadHandler](INFO): Protected caller Thread ID is 2269 2018-01-23T00:05:28.230Z,1516665928.230 [ComponentRegistry](DEBUG): Component "logger" handled in its own thread. 2018-01-23T00:05:28.230Z,1516665928.230 [logger ThreadHandler](DEBUG): Created PCaller Thread at 404E14E0 2018-01-23T00:05:28.231Z,1516665928.231 [logger ThreadHandler](INFO): Protected caller Thread ID is 2270 2018-01-23T00:05:28.233Z,1516665928.233 [ComponentRegistry](DEBUG): SyncComponent "LogSplitter" handled in the control thread. 2018-01-23T00:05:28.233Z,1516665928.233 [Supervisor](INFO): Looking for Config files in directory: Config/ 2018-01-23T00:05:28.235Z,1516665928.235 [Supervisor](INFO): Opening Config file at: Config/BIT.cfg 2018-01-23T00:05:28.413Z,1516665928.413 [ComponentRegistry](DEBUG): Loaded Config Component "Config/BIT 2018-01-23T00:05:28.413Z,1516665928.413 [Supervisor](INFO): Opening Config file at: Config/Derivation.cfg 2018-01-23T00:05:28.546Z,1516665928.546 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Derivation 2018-01-23T00:05:28.547Z,1516665928.547 [Supervisor](INFO): Opening Config file at: Config/Control.cfg 2018-01-23T00:05:28.852Z,1516665928.852 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Control 2018-01-23T00:05:28.853Z,1516665928.853 [Supervisor](INFO): Opening Config file at: Config/Estimation.cfg 2018-01-23T00:05:28.990Z,1516665928.990 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Estimation 2018-01-23T00:05:28.991Z,1516665928.991 [Supervisor](INFO): Opening Config file at: Config/Guidance.cfg 2018-01-23T00:05:29.090Z,1516665929.090 [Supervisor](INFO): Opening Config file at: Config/Navigation.cfg 2018-01-23T00:05:29.278Z,1516665929.278 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Navigation 2018-01-23T00:05:29.279Z,1516665929.279 [Supervisor](INFO): Opening Config file at: Config/Sample.cfg 2018-01-23T00:05:29.375Z,1516665929.375 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Sample 2018-01-23T00:05:29.376Z,1516665929.376 [Supervisor](INFO): Opening Config file at: Config/Science.cfg 2018-01-23T00:05:29.685Z,1516665929.685 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Science 2018-01-23T00:05:29.686Z,1516665929.686 [Supervisor](INFO): Opening Config file at: Config/Sensor.cfg 2018-01-23T00:05:30.080Z,1516665930.080 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Sensor 2018-01-23T00:05:30.081Z,1516665930.081 [Supervisor](INFO): Opening Config file at: Config/Servo.cfg 2018-01-23T00:05:30.359Z,1516665930.359 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Servo 2018-01-23T00:05:30.360Z,1516665930.360 [Supervisor](INFO): Opening Config file at: Config/Simulator.cfg 2018-01-23T00:05:30.825Z,1516665930.825 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Simulator 2018-01-23T00:05:30.826Z,1516665930.826 [Supervisor](INFO): Opening Config file at: Config/logger.cfg 2018-01-23T00:05:31.016Z,1516665931.016 [ComponentRegistry](DEBUG): Loaded Config Component "Config/logger 2018-01-23T00:05:31.017Z,1516665931.017 [Supervisor](INFO): Opening Config file at: Config/secure.cfg 2018-01-23T00:05:31.113Z,1516665931.113 [ComponentRegistry](DEBUG): Loaded Config Component "Config/secure 2018-01-23T00:05:31.114Z,1516665931.114 [Supervisor](INFO): Opening Config file at: Config/vehicle.cfg 2018-01-23T00:05:31.550Z,1516665931.550 [ComponentRegistry](DEBUG): Loaded Config Component "Config/vehicle 2018-01-23T00:05:31.551Z,1516665931.551 [Supervisor](INFO): Opening Config file at: Config/workSite.cfg 2018-01-23T00:05:31.654Z,1516665931.654 [ComponentRegistry](DEBUG): Loaded Config Component "Config/workSite 2018-01-23T00:05:31.656Z,1516665931.656 [Supervisor](INFO): Looking for Config files in directory: Config/lrauv-aku/ 2018-01-23T00:05:31.657Z,1516665931.657 [Supervisor](INFO): Opening Config file at: Config/lrauv-aku/Battery.cfg 2018-01-23T00:05:31.878Z,1516665931.878 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Battery 2018-01-23T00:05:31.878Z,1516665931.878 [Supervisor](INFO): Opening Config file at: Config/lrauv-aku/BIT.cfg 2018-01-23T00:05:31.973Z,1516665931.973 [Supervisor](INFO): Opening Config file at: Config/lrauv-aku/Navigation.cfg 2018-01-23T00:05:32.074Z,1516665932.074 [Supervisor](INFO): Opening Config file at: Config/lrauv-aku/Control.cfg 2018-01-23T00:05:32.169Z,1516665932.169 [Supervisor](INFO): Opening Config file at: Config/lrauv-aku/Simulator.cfg 2018-01-23T00:05:32.253Z,1516665932.253 [Supervisor](INFO): Opening Config file at: Config/lrauv-aku/Science.cfg 2018-01-23T00:05:32.398Z,1516665932.398 [Supervisor](INFO): Opening Config file at: Config/lrauv-aku/Sensor.cfg 2018-01-23T00:05:32.558Z,1516665932.558 [Supervisor](INFO): Opening Config file at: Config/lrauv-aku/Servo.cfg 2018-01-23T00:05:32.661Z,1516665932.661 [Supervisor](INFO): Opening Config file at: Config/lrauv-aku/logger.cfg 2018-01-23T00:05:32.755Z,1516665932.755 [Supervisor](INFO): Opening Config file at: Config/lrauv-aku/secure.cfg 2018-01-23T00:05:32.837Z,1516665932.837 [Supervisor](INFO): Opening Config file at: Config/lrauv-aku/vehicle.cfg 2018-01-23T00:05:32.996Z,1516665932.996 [Supervisor](INFO): Looking for Config files in directory: Config/lrauv-aku/root/ 2018-01-23T00:05:32.996Z,1516665932.996 [Supervisor](IMPORTANT): Reading configuration overrides from Data/persisted.cfg 2018-01-23T00:05:33.001Z,1516665933.001 [Module Loader](DEBUG): Loading Module at Modules/BIT.so 2018-01-23T00:05:33.124Z,1516665933.124 [SBIT](DEBUG): Construct Startup Built In Test. 2018-01-23T00:05:33.153Z,1516665933.153 [SBIT] Loaded 2018-01-23T00:05:33.153Z,1516665933.153 [ComponentRegistry](DEBUG): SyncComponent "SBIT" handled in the control thread. 2018-01-23T00:05:33.154Z,1516665933.154 [IBIT](DEBUG): Construct Initiated Built In Test. 2018-01-23T00:05:33.180Z,1516665933.180 [IBIT] Loaded 2018-01-23T00:05:33.180Z,1516665933.180 [ComponentRegistry](DEBUG): SyncComponent "IBIT" handled in the control thread. 2018-01-23T00:05:33.184Z,1516665933.184 [CBIT](DEBUG): Construct Continuous Built In Test. 2018-01-23T00:05:33.330Z,1516665933.330 [CBIT] Loaded 2018-01-23T00:05:33.330Z,1516665933.330 [ComponentRegistry](DEBUG): SyncComponent "CBIT" handled in the control thread. 2018-01-23T00:05:33.331Z,1516665933.331 [Module Loader](DEBUG): Loaded Module: BIT (Contains the BuiltInTest components, such as C Built In Test) 2018-01-23T00:05:33.331Z,1516665933.331 [Module Loader](DEBUG): Loading Module at Modules/Control.so 2018-01-23T00:05:33.395Z,1516665933.395 [VerticalControl](DEBUG): Construct VerticalControl. 2018-01-23T00:05:33.489Z,1516665933.489 [VerticalControl] Loaded 2018-01-23T00:05:33.490Z,1516665933.490 [ComponentRegistry](DEBUG): SyncComponent "VerticalControl" handled in the control thread. 2018-01-23T00:05:33.491Z,1516665933.491 [HorizontalControl](DEBUG): Construct HorizontalControl. 2018-01-23T00:05:33.548Z,1516665933.548 [HorizontalControl] Loaded 2018-01-23T00:05:33.549Z,1516665933.549 [ComponentRegistry](DEBUG): SyncComponent "HorizontalControl" handled in the control thread. 2018-01-23T00:05:33.549Z,1516665933.549 [SpeedControl](DEBUG): Construct SpeedControl. 2018-01-23T00:05:33.555Z,1516665933.555 [SpeedControl] Loaded 2018-01-23T00:05:33.555Z,1516665933.555 [ComponentRegistry](DEBUG): SyncComponent "SpeedControl" handled in the control thread. 2018-01-23T00:05:33.556Z,1516665933.556 [LoopControl](DEBUG): Construct LoopControl. 2018-01-23T00:05:33.556Z,1516665933.556 [LoopControl] Loaded 2018-01-23T00:05:33.556Z,1516665933.556 [ComponentRegistry](DEBUG): SyncComponent "LoopControl" handled in the control thread. 2018-01-23T00:05:33.557Z,1516665933.557 [Module Loader](DEBUG): Loaded Module: Control (Contains the Control components, such as Depth, Heading, and Speed Control) 2018-01-23T00:05:33.557Z,1516665933.557 [Module Loader](DEBUG): Loading Module at Modules/Derivation.so 2018-01-23T00:05:33.596Z,1516665933.596 [DepthRateCalculator] Loaded 2018-01-23T00:05:33.596Z,1516665933.596 [ComponentRegistry](DEBUG): SyncComponent "DepthRateCalculator" handled in the control thread. 2018-01-23T00:05:33.601Z,1516665933.601 [PitchRateCalculator] Loaded 2018-01-23T00:05:33.602Z,1516665933.602 [ComponentRegistry](DEBUG): SyncComponent "PitchRateCalculator" handled in the control thread. 2018-01-23T00:05:33.617Z,1516665933.617 [SpeedCalculator] Loaded 2018-01-23T00:05:33.617Z,1516665933.617 [ComponentRegistry](DEBUG): SyncComponent "SpeedCalculator" handled in the control thread. 2018-01-23T00:05:33.638Z,1516665933.638 [TempGradientCalculator] Loaded 2018-01-23T00:05:33.638Z,1516665933.638 [ComponentRegistry](DEBUG): SyncComponent "TempGradientCalculator" handled in the control thread. 2018-01-23T00:05:33.653Z,1516665933.653 [VerticalTemperatureHomogeneityIndexCalculator] Loaded 2018-01-23T00:05:33.653Z,1516665933.653 [ComponentRegistry](DEBUG): SyncComponent "VerticalTemperatureHomogeneityIndexCalculator" handled in the control thread. 2018-01-23T00:05:33.658Z,1516665933.658 [YawRateCalculator] Loaded 2018-01-23T00:05:33.658Z,1516665933.658 [ComponentRegistry](DEBUG): SyncComponent "YawRateCalculator" handled in the control thread. 2018-01-23T00:05:33.658Z,1516665933.658 [Module Loader](DEBUG): Loaded Module: Derivation (Contains the base derivation components) 2018-01-23T00:05:33.659Z,1516665933.659 [Module Loader](DEBUG): Loading Module at Modules/Estimation.so 2018-01-23T00:05:33.739Z,1516665933.739 [StratificationFrontDetector](INFO): threshold set to: 0.399988 degC 2018-01-23T00:05:33.739Z,1516665933.739 [StratificationFrontDetector](DEBUG): (re)initializing 2018-01-23T00:05:33.739Z,1516665933.739 [StratificationFrontDetector] Loaded 2018-01-23T00:05:33.740Z,1516665933.740 [ComponentRegistry](DEBUG): SyncComponent "StratificationFrontDetector" handled in the control thread. 2018-01-23T00:05:33.740Z,1516665933.740 [Module Loader](DEBUG): Loaded Module: Estimation (Contains the base estimation components) 2018-01-23T00:05:33.741Z,1516665933.741 [Module Loader](DEBUG): Loading Module at Modules/Guidance.so 2018-01-23T00:05:33.966Z,1516665933.966 [Module Loader](DEBUG): Loaded Module: Guidance (Contains behaviors and commands) 2018-01-23T00:05:33.966Z,1516665933.966 [Module Loader](DEBUG): Loading Module at Modules/Navigation.so 2018-01-23T00:05:34.060Z,1516665934.060 [DeadReckonUsingMultipleVelocitySources] Loaded 2018-01-23T00:05:34.060Z,1516665934.060 [ComponentRegistry](DEBUG): SyncComponent "DeadReckonUsingMultipleVelocitySources" handled in the control thread. 2018-01-23T00:05:34.112Z,1516665934.112 [DeadReckonUsingSpeedCalculator] Loaded 2018-01-23T00:05:34.112Z,1516665934.112 [ComponentRegistry](DEBUG): SyncComponent "DeadReckonUsingSpeedCalculator" handled in the control thread. 2018-01-23T00:05:34.165Z,1516665934.165 [DeadReckonWithRespectToSeafloor] Loaded 2018-01-23T00:05:34.165Z,1516665934.165 [ComponentRegistry](DEBUG): SyncComponent "DeadReckonWithRespectToSeafloor" handled in the control thread. 2018-01-23T00:05:34.181Z,1516665934.181 [NavChart] Loaded 2018-01-23T00:05:34.181Z,1516665934.181 [ComponentRegistry](DEBUG): SyncComponent "NavChart" handled in the control thread. 2018-01-23T00:05:34.185Z,1516665934.185 [UniversalFixResidualReporter] Loaded 2018-01-23T00:05:34.185Z,1516665934.185 [ComponentRegistry](DEBUG): SyncComponent "UniversalFixResidualReporter" handled in the control thread. 2018-01-23T00:05:34.186Z,1516665934.186 [Module Loader](DEBUG): Loaded Module: Navigation (Contains the base navigation components) 2018-01-23T00:05:34.186Z,1516665934.186 [Module Loader](DEBUG): Loading Module at Modules/Sample.so 2018-01-23T00:05:34.199Z,1516665934.199 [Module Loader](DEBUG): Loaded Module: Sample (This is a Sample Module of Sample Components) 2018-01-23T00:05:34.199Z,1516665934.199 [Module Loader](DEBUG): Loading Module at Modules/Science.so 2018-01-23T00:05:34.345Z,1516665934.345 [Aanderaa_O2] Loaded 2018-01-23T00:05:34.345Z,1516665934.345 [ComponentRegistry](DEBUG): SyncComponent "Aanderaa_O2" handled in the control thread. 2018-01-23T00:05:34.391Z,1516665934.391 [CTD_Seabird] Loaded 2018-01-23T00:05:34.391Z,1516665934.391 [ComponentRegistry](DEBUG): Component "CTD_Seabird" handled in its own thread. 2018-01-23T00:05:34.392Z,1516665934.392 [CTD_Seabird ThreadHandler](DEBUG): Created PCaller Thread at 406D54E0 2018-01-23T00:05:34.392Z,1516665934.392 [CTD_Seabird ThreadHandler](INFO): Protected caller Thread ID is 2349 2018-01-23T00:05:34.408Z,1516665934.408 [ESPComponent] Loaded 2018-01-23T00:05:34.408Z,1516665934.408 [ComponentRegistry](DEBUG): SyncComponent "ESPComponent" handled in the control thread. 2018-01-23T00:05:34.422Z,1516665934.422 [PAR_Licor] Loaded 2018-01-23T00:05:34.422Z,1516665934.422 [ComponentRegistry](DEBUG): SyncComponent "PAR_Licor" handled in the control thread. 2018-01-23T00:05:34.469Z,1516665934.469 [WetLabsBB2FL] Loaded 2018-01-23T00:05:34.469Z,1516665934.469 [ComponentRegistry](DEBUG): Component "WetLabsBB2FL" handled in its own thread. 2018-01-23T00:05:34.470Z,1516665934.470 [WetLabsBB2FL ThreadHandler](DEBUG): Created PCaller Thread at 407054E0 2018-01-23T00:05:34.471Z,1516665934.471 [WetLabsBB2FL ThreadHandler](INFO): Protected caller Thread ID is 2350 2018-01-23T00:05:34.471Z,1516665934.471 [Module Loader](DEBUG): Loaded Module: Science (Contains the science components) 2018-01-23T00:05:34.472Z,1516665934.472 [Module Loader](DEBUG): Loading Module at Modules/Sensor.so 2018-01-23T00:05:34.720Z,1516665934.720 [DataOverHttps] Loaded 2018-01-23T00:05:34.721Z,1516665934.721 [ComponentRegistry](DEBUG): SyncComponent "DataOverHttps" handled in the control thread. 2018-01-23T00:05:34.733Z,1516665934.733 [Depth_Keller] Loaded 2018-01-23T00:05:34.734Z,1516665934.734 [ComponentRegistry](DEBUG): SyncComponent "Depth_Keller" handled in the control thread. 2018-01-23T00:05:34.821Z,1516665934.821 [NAL9602] Loaded 2018-01-23T00:05:34.821Z,1516665934.821 [ComponentRegistry](DEBUG): SyncComponent "NAL9602" handled in the control thread. 2018-01-23T00:05:34.826Z,1516665934.826 [Onboard] Loaded 2018-01-23T00:05:34.826Z,1516665934.826 [ComponentRegistry](DEBUG): SyncComponent "Onboard" handled in the control thread. 2018-01-23T00:05:34.833Z,1516665934.833 [Radio_Surface] Loaded 2018-01-23T00:05:34.833Z,1516665934.833 [ComponentRegistry](DEBUG): Component "Radio_Surface" handled in its own thread. 2018-01-23T00:05:34.834Z,1516665934.834 [Radio_Surface ThreadHandler](DEBUG): Created PCaller Thread at 409494E0 2018-01-23T00:05:34.835Z,1516665934.835 [Radio_Surface ThreadHandler](INFO): Protected caller Thread ID is 2351 2018-01-23T00:05:35.006Z,1516665935.006 [DAT] Loaded 2018-01-23T00:05:35.007Z,1516665935.007 [ComponentRegistry](DEBUG): SyncComponent "DAT" handled in the control thread. 2018-01-23T00:05:35.052Z,1516665935.052 [PNI_TCM] Loaded 2018-01-23T00:05:35.052Z,1516665935.052 [ComponentRegistry](DEBUG): SyncComponent "PNI_TCM" handled in the control thread. 2018-01-23T00:05:35.053Z,1516665935.053 [Module Loader](DEBUG): Loaded Module: Sensor (Contains the sensor components) 2018-01-23T00:05:35.053Z,1516665935.053 [Module Loader](DEBUG): Loading Module at Modules/Servo.so 2018-01-23T00:05:35.146Z,1516665935.146 [BuoyancyServo] Loaded 2018-01-23T00:05:35.146Z,1516665935.146 [ComponentRegistry](DEBUG): SyncComponent "BuoyancyServo" handled in the control thread. 2018-01-23T00:05:35.157Z,1516665935.157 [ElevatorServo] Loaded 2018-01-23T00:05:35.158Z,1516665935.158 [ComponentRegistry](DEBUG): SyncComponent "ElevatorServo" handled in the control thread. 2018-01-23T00:05:35.168Z,1516665935.168 [MassServo] Loaded 2018-01-23T00:05:35.168Z,1516665935.168 [ComponentRegistry](DEBUG): SyncComponent "MassServo" handled in the control thread. 2018-01-23T00:05:35.179Z,1516665935.179 [RudderServo] Loaded 2018-01-23T00:05:35.179Z,1516665935.179 [ComponentRegistry](DEBUG): SyncComponent "RudderServo" handled in the control thread. 2018-01-23T00:05:35.190Z,1516665935.190 [ThrusterServo] Loaded 2018-01-23T00:05:35.190Z,1516665935.190 [ComponentRegistry](DEBUG): SyncComponent "ThrusterServo" handled in the control thread. 2018-01-23T00:05:35.191Z,1516665935.191 [Module Loader](DEBUG): Loaded Module: Servo (This is the module containing motor controllers) 2018-01-23T00:05:35.191Z,1516665935.191 [Module Loader](DEBUG): Loading Module at Modules/Simulator.so 2018-01-23T00:05:35.284Z,1516665935.284 [Module Loader](DEBUG): Loaded Module: Simulator (This is the module containing the Simulator) 2018-01-23T00:05:35.285Z,1516665935.285 [Module Loader](DEBUG): Loading Module at Modules/Trigger.so 2018-01-23T00:05:35.308Z,1516665935.308 [Module Loader](DEBUG): Loaded Module: Trigger (Contains triggers for use in missions) 2018-01-23T00:05:35.312Z,1516665935.312 [ComponentRegistry](DEBUG): SyncComponent "MissionManager" handled in the control thread. 2018-01-23T00:05:35.313Z,1516665935.313 [ComponentRegistry](DEBUG): SyncComponent "Reporter" handled in the control thread. 2018-01-23T00:05:35.319Z,1516665935.319 [ComponentRegistry](DEBUG): Component "NavChartDb" handled in its own thread. 2018-01-23T00:05:35.320Z,1516665935.320 [NavChartDb ThreadHandler](DEBUG): Created PCaller Thread at 409F04E0 2018-01-23T00:05:35.321Z,1516665935.321 [NavChartDb ThreadHandler](INFO): Protected caller Thread ID is 2352 2018-01-23T00:05:35.325Z,1516665935.325 [Supervisor](INFO): Main Thread ID is 796 2018-01-23T00:05:35.326Z,1516665935.326 [Supervisor](DEBUG): Running supervisor. 2018-01-23T00:05:35.326Z,1516665935.326 [CommandLine ThreadHandler](INFO): Handler Thread ID is 2353 2018-01-23T00:05:35.329Z,1516665935.329 [controlThread ThreadHandler](INFO): Handler Thread ID is 2354 2018-01-23T00:05:35.329Z,1516665935.329 [controlThread](DEBUG): Initializing ControlThread 2018-01-23T00:05:35.330Z,1516665935.330 [SBIT](INFO): Initialize SBIT Component. 2018-01-23T00:05:35.331Z,1516665935.331 [SBIT](IMPORTANT): git: 2017-12-12-45-gad4d7da 2018-01-23T00:05:35.331Z,1516665935.331 [SBIT](INFO): git hash: ad4d7da944cc2b4b9cb3d42bd51580e7a7943521 2018-01-23T00:05:35.331Z,1516665935.331 [SBIT](IMPORTANT): Kernel Release: 2.6.27.8 2018-01-23T00:05:35.332Z,1516665935.332 [SBIT](INFO): Kernel Reporting Different Version From Configuration. Kernel Expected: #639 PREEMPT Wed Mar 12 12:53:33 PDT 2014 Kernel Reported: #2 PREEMPT Thu Jan 11 20:13:48 PST 2018 2018-01-23T00:05:35.333Z,1516665935.333 [SBIT](INFO): Beginning SBIT in 79.000000 seconds. 2018-01-23T00:05:35.334Z,1516665935.334 [IBIT](INFO): Initialize IBIT Component. 2018-01-23T00:05:35.335Z,1516665935.335 [CBIT](DEBUG): Initialize CBIT Component. 2018-01-23T00:05:35.335Z,1516665935.335 [CBIT](CRITICAL): LAST REBOOT DUE TO WATCHDOG TIMER RESET. 2018-01-23T00:05:35.336Z,1516665935.336 [logger ThreadHandler](INFO): Handler Thread ID is 2355 2018-01-23T00:05:35.363Z,1516665935.363 [CTD_Seabird ThreadHandler](INFO): Handler Thread ID is 2356 2018-01-23T00:05:35.364Z,1516665935.364 [CTD_Seabird](INFO): Initializing 2018-01-23T00:05:35.399Z,1516665935.399 [WetLabsBB2FL ThreadHandler](INFO): Handler Thread ID is 2358 2018-01-23T00:05:35.401Z,1516665935.401 [WetLabsBB2FL](INFO): Powering down 2018-01-23T00:05:35.435Z,1516665935.435 [Radio_Surface ThreadHandler](INFO): Handler Thread ID is 2359 2018-01-23T00:05:35.440Z,1516665935.440 [Radio_Surface](INFO): Powering up 2018-01-23T00:05:35.443Z,1516665935.443 [VerticalControl](DEBUG): Initialize VerticalControlComponent. 2018-01-23T00:05:35.445Z,1516665935.445 [HorizontalControl](DEBUG): Initialize HorizontalControlComponent. 2018-01-23T00:05:35.446Z,1516665935.446 [SpeedControl](DEBUG): Initialize SpeedControlComponent. 2018-01-23T00:05:35.447Z,1516665935.447 [LoopControl](DEBUG): Initialize LoopControlComponent. 2018-01-23T00:05:35.447Z,1516665935.447 [DepthRateCalculator](DEBUG): Initializing DepthRateCalculator. 2018-01-23T00:05:35.448Z,1516665935.448 [PitchRateCalculator](DEBUG): Initializing PitchRateCalculator. 2018-01-23T00:05:35.448Z,1516665935.448 [SpeedCalculator](DEBUG): Initializing SpeedCalculator. 2018-01-23T00:05:35.448Z,1516665935.448 [TempGradientCalculator](DEBUG): Initializing TempGradientCalculator. 2018-01-23T00:05:35.449Z,1516665935.449 [VerticalTemperatureHomogeneityIndexCalculator](DEBUG): (re)initializing 2018-01-23T00:05:35.450Z,1516665935.450 [YawRateCalculator](DEBUG): Initializing YawRateCalculator. 2018-01-23T00:05:35.451Z,1516665935.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T00:05:35.452Z,1516665935.452 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T00:05:35.452Z,1516665935.452 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T00:05:35.452Z,1516665935.452 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T00:05:35.453Z,1516665935.453 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T00:05:35.453Z,1516665935.453 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T00:05:35.454Z,1516665935.454 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T00:05:35.454Z,1516665935.454 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T00:05:35.454Z,1516665935.454 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T00:05:35.455Z,1516665935.455 [NavChart](DEBUG): Initialize NavChart Navigation. 2018-01-23T00:05:35.455Z,1516665935.455 [UniversalFixResidualReporter](DEBUG): Initializing UniversalFixResidualReporter component. 2018-01-23T00:05:35.467Z,1516665935.467 [NavChartDb ThreadHandler](INFO): Handler Thread ID is 2360 2018-01-23T00:05:35.470Z,1516665935.470 [NavChartDb](INFO): Looking for Electronic Nav Chart file at: Resources/ElectronicNavigationCharts/US1WC07M.000 2018-01-23T00:05:35.471Z,1516665935.471 [NavChartDb](INFO): Already Loaded Electronic Nav Chart data from US1WC07M.000 2018-01-23T00:05:35.471Z,1516665935.471 [NavChartDb](INFO): Looking for Electronic Nav Chart file at: Resources/ElectronicNavigationCharts/US2WC11M.000 2018-01-23T00:05:35.471Z,1516665935.471 [NavChartDb](INFO): Already Loaded Electronic Nav Chart data from US2WC11M.000 2018-01-23T00:05:35.471Z,1516665935.471 [NavChartDb](INFO): Looking for Electronic Nav Chart file at: Resources/ElectronicNavigationCharts/US3CA52M.000 2018-01-23T00:05:35.471Z,1516665935.471 [NavChartDb](INFO): Already Loaded Electronic Nav Chart data from US3CA52M.000 2018-01-23T00:05:35.472Z,1516665935.472 [NavChartDb](INFO): Looking for Electronic Nav Chart file at: Resources/ElectronicNavigationCharts/US4CA60M.000 2018-01-23T00:05:35.472Z,1516665935.472 [NavChartDb](INFO): Already Loaded Electronic Nav Chart data from US4CA60M.000 2018-01-23T00:05:35.472Z,1516665935.472 [NavChartDb](INFO): Looking for Electronic Nav Chart file at: Resources/ElectronicNavigationCharts/US5CA50M.000 2018-01-23T00:05:35.472Z,1516665935.472 [NavChartDb](INFO): Already Loaded Electronic Nav Chart data from US5CA50M.000 2018-01-23T00:05:35.472Z,1516665935.472 [NavChartDb](INFO): Looking for Electronic Nav Chart file at: Resources/ElectronicNavigationCharts/US5CA61M.000 2018-01-23T00:05:35.472Z,1516665935.472 [NavChartDb](INFO): Already Loaded Electronic Nav Chart data from US5CA61M.000 2018-01-23T00:05:35.473Z,1516665935.473 [NavChartDb](INFO): Looking for Electronic Nav Chart file at: Resources/ElectronicNavigationCharts/US5CA62M.000 2018-01-23T00:05:35.473Z,1516665935.473 [NavChartDb](INFO): Already Loaded Electronic Nav Chart data from US5CA62M.000 2018-01-23T00:05:35.473Z,1516665935.473 [NavChartDb](INFO): Looking for Electronic Nav Chart file at: Resources/ElectronicNavigationCharts/US5CA83M.000 2018-01-23T00:05:35.473Z,1516665935.473 [NavChartDb](INFO): Already Loaded Electronic Nav Chart data from US5CA83M.000 2018-01-23T00:05:35.507Z,1516665935.507 [MissionManager](INFO): Loading Mission: Missions/Startup.xml 2018-01-23T00:05:35.548Z,1516665935.548 [Startup:A.GoToSurface](DEBUG): Construct GoToSurface. 2018-01-23T00:05:35.582Z,1516665935.582 [MissionManager](DEBUG): 2018-01-23T00:05:35.599Z,1516665935.599 [MissionManager](INFO): Loading Mission: Missions/Default.xml 2018-01-23T00:05:35.670Z,1516665935.670 [MissionManager](INFO): DefineArg Default.ElapsedSinceDefaultStarted = 0.000000 min 2018-01-23T00:05:35.681Z,1516665935.681 [CTD_Seabird](INFO): Stopping potential previous instance(s) of CTD_Seabird LCM interface 2018-01-23T00:05:35.681Z,1516665935.681 [CTD_Seabird](INFO): Powering down 2018-01-23T00:05:35.707Z,1516665935.707 [Default:A.Wait](DEBUG): Construct Wait. 2018-01-23T00:05:35.708Z,1516665935.708 [Default:B.GoToSurface](DEBUG): Construct GoToSurface. 2018-01-23T00:05:35.731Z,1516665935.731 [Default:CheckIn:Read_Iridium:A_Timeout:A.Execute](DEBUG): Construct Execute. 2018-01-23T00:05:35.733Z,1516665935.733 [Default:CheckIn:C.Wait](DEBUG): Construct Wait. 2018-01-23T00:05:35.760Z,1516665935.760 [Default:E.Execute](DEBUG): Construct Execute. 2018-01-23T00:05:35.797Z,1516665935.797 [MissionManager](DEBUG): 0 Wait a moment to see if the scheduler starts a new mission before starting to actually run Default. 13 Burn 300 Dropped weight due to communications timeout. 5 Default mission has been running for Restarting logs and Default mission. restart logs 2018-01-23T00:05:35.803Z,1516665935.803 [controlThread](DEBUG): Component order: CycleStarter,Aanderaa_O2,ESPComponent,PAR_Licor,DataOverHttps,Depth_Keller,NAL9602,Onboard,DAT,PNI_TCM,PAR_Licor,Depth_Keller,DepthRateCalculator,PitchRateCalculator,SpeedCalculator,TempGradientCalculator,VerticalTemperatureHomogeneityIndexCalculator,YawRateCalculator,StratificationFrontDetector,DeadReckonUsingMultipleVelocitySources,DeadReckonUsingSpeedCalculator,DeadReckonWithRespectToSeafloor,NavChart,UniversalFixResidualReporter,MissionManager,VerticalControl,HorizontalControl,SpeedControl,LoopControl,BuoyancyServo,ElevatorServo,MassServo,RudderServo,ThrusterServo,SBIT,IBIT,CBIT,Reporter,LogSplitter, 2018-01-23T00:05:35.865Z,1516665935.865 [DataOverHttps](DEBUG): dashIP=134.89.2.23 starts with a digit so assuming it is a numeric IP 2018-01-23T00:05:35.966Z,1516665935.966 [DAT](INFO): Powering up 2018-01-23T00:05:35.966Z,1516665935.966 [DAT](DEBUG): Initializing DAT. 2018-01-23T00:05:36.131Z,1516665936.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Starting up and don't have orientation data yet. 2018-01-23T00:05:36.131Z,1516665936.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): All data for platform velocity is invalid. 2018-01-23T00:05:36.139Z,1516665936.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T00:05:36.155Z,1516665936.155 [DeadReckonUsingSpeedCalculator](DEBUG): Starting up and don't have orientation data yet. 2018-01-23T00:05:36.167Z,1516665936.167 [DeadReckonWithRespectToSeafloor](DEBUG): Starting up and don't have orientation data yet. 2018-01-23T00:05:36.283Z,1516665936.283 [BuoyancyServo](DEBUG): Initializing EZServoServo. 2018-01-23T00:05:36.291Z,1516665936.291 [BuoyancyServo](DEBUG): Initializing BuoyancyServo. 2018-01-23T00:05:36.305Z,1516665936.305 [ElevatorServo](DEBUG): Initializing EZServoServo. 2018-01-23T00:05:36.311Z,1516665936.311 [ElevatorServo](DEBUG): Initializing ElevatorServo. 2018-01-23T00:05:36.317Z,1516665936.317 [MassServo](DEBUG): Initializing EZServoServo. 2018-01-23T00:05:36.323Z,1516665936.323 [MassServo](DEBUG): Initializing MassServo. 2018-01-23T00:05:36.329Z,1516665936.329 [RudderServo](DEBUG): Initializing EZServoServo. 2018-01-23T00:05:36.335Z,1516665936.335 [RudderServo](DEBUG): Initializing RudderServo. 2018-01-23T00:05:36.341Z,1516665936.341 [ThrusterServo](DEBUG): Initializing EZServoServo. 2018-01-23T00:05:36.347Z,1516665936.347 [ThrusterServo](DEBUG): Initializing ThrusterServo. 2018-01-23T00:05:36.367Z,1516665936.367 [CommandLine](FAULT): Scheduling is paused 2018-01-23T00:05:36.368Z,1516665936.368 [CBIT](INFO): Critical error at 20180123T000535 2018-01-23T00:05:36.368Z,1516665936.368 [Supervisor](INFO): Stop Mission called by CBIT::checkCriticals 2018-01-23T00:05:36.711Z,1516665936.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Starting up and don't have orientation data yet. 2018-01-23T00:05:36.711Z,1516665936.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): All data for platform velocity is invalid. 2018-01-23T00:05:36.712Z,1516665936.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T00:05:36.713Z,1516665936.713 [DeadReckonUsingSpeedCalculator](DEBUG): Starting up and don't have orientation data yet. 2018-01-23T00:05:36.714Z,1516665936.714 [DeadReckonWithRespectToSeafloor](DEBUG): Starting up and don't have orientation data yet. 2018-01-23T00:05:36.862Z,1516665936.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Starting up and don't have orientation data yet. 2018-01-23T00:05:36.862Z,1516665936.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): All data for platform velocity is invalid. 2018-01-23T00:05:36.863Z,1516665936.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T00:05:36.864Z,1516665936.864 [DeadReckonUsingSpeedCalculator](DEBUG): Starting up and don't have orientation data yet. 2018-01-23T00:05:36.864Z,1516665936.864 [DeadReckonWithRespectToSeafloor](DEBUG): Starting up and don't have orientation data yet. 2018-01-23T00:05:37.199Z,1516665937.199 [BuoyancyServo](ERROR): Buoyancy initialization uart error serial timeout 2018-01-23T00:05:37.199Z,1516665937.199 [BuoyancyServo](FAULT): Buoyancy failed to initialize 2018-01-23T00:05:37.199Z,1516665937.199 [BuoyancyServo] Communications Fault, FailCount= 1 2018-01-23T00:05:37.199Z,1516665937.199 [BuoyancyServo](ERROR): Communications Fault 2018-01-23T00:05:37.406Z,1516665937.406 [CBIT](ERROR): Communications Fault in component: BuoyancyServo 2018-01-23T00:05:37.511Z,1516665937.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Starting up and don't have orientation data yet. 2018-01-23T00:05:37.511Z,1516665937.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): All data for platform velocity is invalid. 2018-01-23T00:05:37.512Z,1516665937.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T00:05:37.513Z,1516665937.513 [DeadReckonUsingSpeedCalculator](DEBUG): Starting up and don't have orientation data yet. 2018-01-23T00:05:37.514Z,1516665937.514 [DeadReckonWithRespectToSeafloor](DEBUG): Starting up and don't have orientation data yet. 2018-01-23T00:05:37.555Z,1516665937.555 [BuoyancyServo](DEBUG): Uninitialize Buoyancy Servo. 2018-01-23T00:05:37.556Z,1516665937.556 [BuoyancyServo](INFO): Powering down 2018-01-23T00:05:37.882Z,1516665937.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Starting up and don't have orientation data yet. 2018-01-23T00:05:37.883Z,1516665937.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): All data for platform velocity is invalid. 2018-01-23T00:05:37.884Z,1516665937.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T00:05:37.884Z,1516665937.884 [DeadReckonUsingSpeedCalculator](DEBUG): Starting up and don't have orientation data yet. 2018-01-23T00:05:37.885Z,1516665937.885 [DeadReckonWithRespectToSeafloor](DEBUG): Starting up and don't have orientation data yet. 2018-01-23T00:05:38.250Z,1516665938.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Starting up and don't have orientation data yet. 2018-01-23T00:05:38.250Z,1516665938.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): All data for platform velocity is invalid. 2018-01-23T00:05:38.259Z,1516665938.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T00:05:38.260Z,1516665938.260 [DeadReckonUsingSpeedCalculator](DEBUG): Starting up and don't have orientation data yet. 2018-01-23T00:05:38.260Z,1516665938.260 [DeadReckonWithRespectToSeafloor](DEBUG): Starting up and don't have orientation data yet. 2018-01-23T00:05:38.650Z,1516665938.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Starting up and don't have orientation data yet. 2018-01-23T00:05:38.650Z,1516665938.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): All data for platform velocity is invalid. 2018-01-23T00:05:38.651Z,1516665938.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T00:05:38.655Z,1516665938.655 [DeadReckonUsingSpeedCalculator](DEBUG): Starting up and don't have orientation data yet. 2018-01-23T00:05:38.656Z,1516665938.656 [DeadReckonWithRespectToSeafloor](DEBUG): Starting up and don't have orientation data yet. 2018-01-23T00:05:39.135Z,1516665939.135 [Aanderaa_O2](INFO): Powering down 2018-01-23T00:05:39.299Z,1516665939.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Starting up and don't have orientation data yet. 2018-01-23T00:05:39.299Z,1516665939.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): All data for platform velocity is invalid. 2018-01-23T00:05:39.300Z,1516665939.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T00:05:39.301Z,1516665939.301 [DeadReckonUsingSpeedCalculator](DEBUG): Starting up and don't have orientation data yet. 2018-01-23T00:05:39.302Z,1516665939.302 [DeadReckonWithRespectToSeafloor](DEBUG): Starting up and don't have orientation data yet. 2018-01-23T00:05:39.485Z,1516665939.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): All data for platform velocity is invalid. 2018-01-23T00:05:39.495Z,1516665939.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T00:05:39.556Z,1516665939.556 [CBIT](INFO): Clearing failed state for component BuoyancyServo 2018-01-23T00:05:39.556Z,1516665939.556 [BuoyancyServo] No Fault, FailCount= 1 2018-01-23T00:05:39.884Z,1516665939.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): All data for platform velocity is invalid. 2018-01-23T00:05:39.885Z,1516665939.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T00:05:39.900Z,1516665939.900 [BuoyancyServo](DEBUG): Initializing EZServoServo. 2018-01-23T00:05:40.019Z,1516665940.019 [BuoyancyServo](DEBUG): Initializing BuoyancyServo. 2018-01-23T00:05:40.288Z,1516665940.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): All data for platform velocity is invalid. 2018-01-23T00:05:40.289Z,1516665940.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T00:05:40.687Z,1516665940.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T00:05:41.051Z,1516665941.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T00:05:41.505Z,1516665941.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T00:05:41.869Z,1516665941.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T00:05:42.276Z,1516665942.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T00:05:42.676Z,1516665942.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T00:05:43.084Z,1516665943.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T00:05:43.480Z,1516665943.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T00:05:43.876Z,1516665943.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T00:05:44.262Z,1516665944.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T00:05:44.676Z,1516665944.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T00:05:45.070Z,1516665945.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T00:05:45.469Z,1516665945.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T00:05:45.884Z,1516665945.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T00:05:46.284Z,1516665946.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T00:05:46.692Z,1516665946.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T00:05:47.092Z,1516665947.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T00:05:47.509Z,1516665947.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T00:05:47.901Z,1516665947.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T00:05:48.276Z,1516665948.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T00:05:48.676Z,1516665948.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T00:05:49.073Z,1516665949.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T00:05:49.441Z,1516665949.441 [DAT](INFO): setting local address to 2 2018-01-23T00:05:49.477Z,1516665949.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T00:05:49.841Z,1516665949.841 [DAT](INFO): set local address to 2 2018-01-23T00:05:49.921Z,1516665949.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T00:05:50.245Z,1516665950.245 [DAT](INFO): unexpected user prompt in deviceResponse_: user:2>Rx Time:20:30:07.3914 2018-01-23T00:05:50.274Z,1516665950.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T00:05:50.680Z,1516665950.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T00:05:51.077Z,1516665951.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T00:05:51.469Z,1516665951.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T00:05:51.880Z,1516665951.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T00:05:52.249Z,1516665952.249 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:05:52.312Z,1516665952.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T00:05:52.640Z,1516665952.640 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:05:52.682Z,1516665952.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T00:05:53.040Z,1516665953.040 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:05:53.080Z,1516665953.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T00:05:53.484Z,1516665953.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T00:05:53.861Z,1516665953.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T00:05:54.284Z,1516665954.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T00:05:54.680Z,1516665954.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T00:05:55.080Z,1516665955.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T00:05:55.468Z,1516665955.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T00:05:55.896Z,1516665955.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T00:05:56.269Z,1516665956.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T00:05:56.684Z,1516665956.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T00:05:57.088Z,1516665957.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T00:05:57.469Z,1516665957.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T00:05:57.887Z,1516665957.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T00:05:58.273Z,1516665958.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T00:05:58.668Z,1516665958.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T00:05:59.115Z,1516665959.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T00:05:59.477Z,1516665959.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T00:05:59.896Z,1516665959.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T00:06:00.311Z,1516665960.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T00:06:00.664Z,1516665960.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T00:06:01.089Z,1516665961.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T00:06:01.460Z,1516665961.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T00:06:01.865Z,1516665961.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T00:06:02.288Z,1516665962.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T00:06:02.665Z,1516665962.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T00:06:03.073Z,1516665963.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T00:06:03.467Z,1516665963.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T00:06:03.908Z,1516665963.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T00:06:04.281Z,1516665964.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T00:06:04.665Z,1516665964.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T00:06:05.024Z,1516665965.024 [NAL9602](INFO): Powering up NAL9602 2018-01-23T00:06:05.102Z,1516665965.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T00:06:05.473Z,1516665965.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T00:06:05.868Z,1516665965.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T00:06:06.312Z,1516665966.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T00:06:06.675Z,1516665966.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T00:06:07.068Z,1516665967.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T00:06:07.477Z,1516665967.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T00:06:07.888Z,1516665967.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T00:06:08.268Z,1516665968.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T00:06:08.709Z,1516665968.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T00:06:09.079Z,1516665969.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T00:06:09.480Z,1516665969.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T00:06:09.883Z,1516665969.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T00:06:10.280Z,1516665970.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T00:06:10.679Z,1516665970.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T00:06:11.083Z,1516665971.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T00:06:11.477Z,1516665971.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T00:06:11.879Z,1516665971.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T00:06:12.283Z,1516665972.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T00:06:12.677Z,1516665972.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T00:06:13.076Z,1516665973.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T00:06:13.483Z,1516665973.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T00:06:13.877Z,1516665973.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T00:06:14.277Z,1516665974.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T00:06:14.681Z,1516665974.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T00:06:15.049Z,1516665975.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T00:06:15.460Z,1516665975.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T00:06:15.876Z,1516665975.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T00:06:16.224Z,1516665976.224 [NAL9602](INFO): NAL9602 initialized 2018-01-23T00:06:16.255Z,1516665976.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T00:06:16.679Z,1516665976.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T00:06:17.124Z,1516665977.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T00:06:17.508Z,1516665977.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T00:06:17.917Z,1516665977.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T00:06:18.284Z,1516665978.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T00:06:18.696Z,1516665978.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T00:06:19.065Z,1516665979.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T00:06:19.487Z,1516665979.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T00:06:19.912Z,1516665979.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T00:06:20.280Z,1516665980.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T00:06:20.677Z,1516665980.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T00:06:21.080Z,1516665981.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T00:06:21.475Z,1516665981.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T00:06:21.877Z,1516665981.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T00:06:22.288Z,1516665982.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T00:06:22.675Z,1516665982.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T00:06:23.073Z,1516665983.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T00:06:23.485Z,1516665983.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T00:06:23.873Z,1516665983.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T00:06:24.285Z,1516665984.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T00:06:24.719Z,1516665984.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T00:06:25.077Z,1516665985.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T00:06:25.497Z,1516665985.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T00:06:25.896Z,1516665985.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T00:06:26.288Z,1516665986.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T00:06:26.691Z,1516665986.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T00:06:27.083Z,1516665987.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T00:06:27.488Z,1516665987.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T00:06:27.884Z,1516665987.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T00:06:28.312Z,1516665988.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T00:06:28.685Z,1516665988.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T00:06:29.092Z,1516665989.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T00:06:29.500Z,1516665989.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T00:06:29.886Z,1516665989.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T00:06:30.285Z,1516665990.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T00:06:30.666Z,1516665990.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T00:06:31.065Z,1516665991.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T00:06:31.465Z,1516665991.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T00:06:31.863Z,1516665991.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T00:06:32.256Z,1516665992.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T00:06:32.660Z,1516665992.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T00:06:33.063Z,1516665993.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T00:06:33.460Z,1516665993.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T00:06:33.865Z,1516665993.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T00:06:34.263Z,1516665994.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T00:06:34.693Z,1516665994.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T00:06:35.082Z,1516665995.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T00:06:35.465Z,1516665995.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T00:06:35.882Z,1516665995.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T00:06:36.284Z,1516665996.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T00:06:36.662Z,1516665996.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T00:06:37.065Z,1516665997.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T00:06:37.465Z,1516665997.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T00:06:37.855Z,1516665997.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T00:06:38.265Z,1516665998.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T00:06:38.665Z,1516665998.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T00:06:39.063Z,1516665999.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T00:06:39.465Z,1516665999.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T00:06:39.882Z,1516665999.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T00:06:40.283Z,1516666000.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T00:06:40.693Z,1516666000.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T00:06:41.082Z,1516666001.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T00:06:41.463Z,1516666001.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T00:06:41.893Z,1516666001.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T00:06:42.283Z,1516666002.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T00:06:42.657Z,1516666002.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T00:06:43.065Z,1516666003.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T00:06:43.465Z,1516666003.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T00:06:43.863Z,1516666003.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T00:06:44.266Z,1516666004.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T00:06:44.693Z,1516666004.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T00:06:45.078Z,1516666005.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T00:06:45.498Z,1516666005.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T00:06:45.584Z,1516666005.584 [CommandLine](IMPORTANT): got command maintain sensor NAL9602.latitude_fix 36.799999 degree 2018-01-23T00:06:45.586Z,1516666005.586 [ComponentRegistry](DEBUG): SyncComponent "Maintain_NAL9602.latitude_fix" handled in the control thread. 2018-01-23T00:06:45.587Z,1516666005.587 [CommandLine](IMPORTANT): got command maintain sensor NAL9602.longitude_fix -121.800003 degree 2018-01-23T00:06:45.588Z,1516666005.588 [ComponentRegistry](DEBUG): SyncComponent "Maintain_NAL9602.longitude_fix" handled in the control thread. 2018-01-23T00:06:45.887Z,1516666005.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T00:06:45.914Z,1516666005.914 [controlThread](DEBUG): Component order: CycleStarter,Aanderaa_O2,ESPComponent,PAR_Licor,DataOverHttps,Depth_Keller,NAL9602,Onboard,DAT,PNI_TCM,PAR_Licor,Depth_Keller,Maintain_NAL9602.latitude_fix,Maintain_NAL9602.longitude_fix,DepthRateCalculator,PitchRateCalculator,SpeedCalculator,TempGradientCalculator,VerticalTemperatureHomogeneityIndexCalculator,YawRateCalculator,StratificationFrontDetector,DeadReckonUsingMultipleVelocitySources,DeadReckonUsingSpeedCalculator,DeadReckonWithRespectToSeafloor,NavChart,UniversalFixResidualReporter,MissionManager,VerticalControl,HorizontalControl,SpeedControl,LoopControl,BuoyancyServo,ElevatorServo,MassServo,RudderServo,ThrusterServo,SBIT,IBIT,CBIT,Reporter,LogSplitter, 2018-01-23T00:06:46.306Z,1516666006.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = 0.000000, longitudeAccuracy_ = 0.000000, depthAccuracy_ = nan 2018-01-23T00:06:46.673Z,1516666006.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = 0.000000, longitudeAccuracy_ = 0.000000, depthAccuracy_ = nan 2018-01-23T00:06:47.073Z,1516666007.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = 0.000000, longitudeAccuracy_ = 0.000000, depthAccuracy_ = nan 2018-01-23T00:06:47.468Z,1516666007.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = 0.000000, longitudeAccuracy_ = 0.000000, depthAccuracy_ = nan 2018-01-23T00:06:47.865Z,1516666007.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = 0.000000, longitudeAccuracy_ = 0.000000, depthAccuracy_ = nan 2018-01-23T00:06:48.269Z,1516666008.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = 0.000000, longitudeAccuracy_ = 0.000000, depthAccuracy_ = nan 2018-01-23T00:06:48.669Z,1516666008.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = 0.000000, longitudeAccuracy_ = 0.000000, depthAccuracy_ = nan 2018-01-23T00:06:49.064Z,1516666009.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = 0.000000, longitudeAccuracy_ = 0.000000, depthAccuracy_ = nan 2018-01-23T00:06:49.470Z,1516666009.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = 0.000000, longitudeAccuracy_ = 0.000000, depthAccuracy_ = nan 2018-01-23T00:06:49.870Z,1516666009.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = 0.000000, longitudeAccuracy_ = 0.000000, depthAccuracy_ = nan 2018-01-23T00:06:50.279Z,1516666010.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = 0.000000, longitudeAccuracy_ = 0.000000, depthAccuracy_ = nan 2018-01-23T00:06:50.678Z,1516666010.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = 0.000000, longitudeAccuracy_ = 0.000000, depthAccuracy_ = nan 2018-01-23T00:06:51.085Z,1516666011.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = 0.000000, longitudeAccuracy_ = 0.000000, depthAccuracy_ = nan 2018-01-23T00:06:51.485Z,1516666011.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = 0.000000, longitudeAccuracy_ = 0.000000, depthAccuracy_ = nan 2018-01-23T00:06:51.874Z,1516666011.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = 0.000000, longitudeAccuracy_ = 0.000000, depthAccuracy_ = nan 2018-01-23T00:06:52.289Z,1516666012.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = 0.000000, longitudeAccuracy_ = 0.000000, depthAccuracy_ = nan 2018-01-23T00:06:52.678Z,1516666012.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = 0.000000, longitudeAccuracy_ = 0.000000, depthAccuracy_ = nan 2018-01-23T00:06:53.076Z,1516666013.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = 0.000000, longitudeAccuracy_ = 0.000000, depthAccuracy_ = nan 2018-01-23T00:06:53.498Z,1516666013.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = 0.000000, longitudeAccuracy_ = 0.000000, depthAccuracy_ = nan 2018-01-23T00:06:53.891Z,1516666013.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = 0.000000, longitudeAccuracy_ = 0.000000, depthAccuracy_ = nan 2018-01-23T00:06:54.286Z,1516666014.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = 0.000000, longitudeAccuracy_ = 0.000000, depthAccuracy_ = nan 2018-01-23T00:06:54.657Z,1516666014.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = 0.000000, longitudeAccuracy_ = 0.000000, depthAccuracy_ = nan 2018-01-23T00:06:55.060Z,1516666015.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = 0.000000, longitudeAccuracy_ = 0.000000, depthAccuracy_ = nan 2018-01-23T00:06:55.069Z,1516666015.069 [SBIT](IMPORTANT): Beginning Startup BIT 2018-01-23T00:06:55.082Z,1516666015.082 [CBIT](IMPORTANT): Beginning ground fault scan 2018-01-23T00:06:55.490Z,1516666015.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = 0.000000, longitudeAccuracy_ = 0.000000, depthAccuracy_ = nan 2018-01-23T00:06:55.872Z,1516666015.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = 0.000000, longitudeAccuracy_ = 0.000000, depthAccuracy_ = nan 2018-01-23T00:06:56.271Z,1516666016.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = 0.000000, longitudeAccuracy_ = 0.000000, depthAccuracy_ = nan 2018-01-23T00:06:56.681Z,1516666016.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = 0.000000, longitudeAccuracy_ = 0.000000, depthAccuracy_ = nan 2018-01-23T00:06:56.765Z,1516666016.765 [CommandLine](IMPORTANT): got command set NAL9602.time_fix 1516665856.000000 second 2018-01-23T00:07:05.088Z,1516666025.088 [CommandLine](IMPORTANT): got command get ESPComponent.simulateHardware 2018-01-23T00:07:05.089Z,1516666025.089 [CommandLine](IMPORTANT): ESPComponent.simulateHardware 1 bool 2018-01-23T00:07:06.091Z,1516666026.091 [CBIT](IMPORTANT): No ground fault detected mA: CHAN A0 (Batt): -0.003865 CHAN A1 (24V): -0.008942 CHAN A2 (12V): 0.000378 CHAN A3 (5V): -0.002667 CHAN B0 (3.3V): -0.000534 CHAN B1 (3.15aV): -0.000966 CHAN B2 (3.15bV): -0.001049 CHAN B3 (GND): -0.002123 OPEN: 0.004122 Full Scale Calc: 4.765 mA, -1.589 mA 2018-01-23T00:07:42.280Z,1516666062.280 [PNI_TCM](ERROR): CRC does not match. Expected:0x25900 got:0x1347 2018-01-23T00:07:42.684Z,1516666062.684 [PNI_TCM](ERROR): CRC does not match. Expected:0x38677 got:0x6593 2018-01-23T00:07:48.701Z,1516666068.701 [SBIT](IMPORTANT): SBIT PASSED 2018-01-23T00:07:49.090Z,1516666069.090 [MissionManager](IMPORTANT): Started mission Startup 2018-01-23T00:07:49.091Z,1516666069.091 [Startup] Running Loop=1 2018-01-23T00:07:49.091Z,1516666069.091 [Startup](DEBUG): Aggregate::initialize Startup 2018-01-23T00:07:49.091Z,1516666069.091 [Startup:A.GoToSurface] Running Loop=1 2018-01-23T00:07:49.091Z,1516666069.091 [Startup:A.GoToSurface](DEBUG): Initialize GoToSurfaceComponent. 2018-01-23T00:07:49.092Z,1516666069.092 [Startup:A.GoToSurface](DEBUG): No depth rate setting specified. Using default value of nan m/s. 2018-01-23T00:07:49.092Z,1516666069.092 [Startup:A.GoToSurface](DEBUG): No pitch setting specified. Using default value of nan degrees. 2018-01-23T00:07:49.092Z,1516666069.092 [Startup:A.GoToSurface](DEBUG): No speed setting specified. Using default value of 1.000000 m/s. 2018-01-23T00:07:49.093Z,1516666069.093 [Startup:A.GoToSurface](DEBUG): No pitch timeout specified. Using default value of 20.000000 seconds. 2018-01-23T00:07:49.093Z,1516666069.093 [Startup:A.GoToSurface](DEBUG): No surface timeout specified. Using default value of 1000.000000 seconds. 2018-01-23T00:07:49.099Z,1516666069.099 [Startup:StartupSatComms] Running Loop=1 2018-01-23T00:07:49.099Z,1516666069.099 [Startup:StartupSatComms](DEBUG): Aggregate::initialize Startup:StartupSatComms 2018-01-23T00:07:49.099Z,1516666069.099 [Startup:StartupSatComms:A] Running Loop=1 2018-01-23T00:07:49.496Z,1516666069.496 [Startup:StartupSatComms:A](DEBUG): Initialize ReadDataComponent to sense latitude_fix 2018-01-23T00:07:49.497Z,1516666069.497 [Startup:StartupSatComms:A] Stopped 2018-01-23T00:07:49.498Z,1516666069.498 [Startup:StartupSatComms:B] Running Loop=1 2018-01-23T00:07:49.887Z,1516666069.887 [Startup:StartupSatComms:B](DEBUG): Initialize ReadDataComponent to sense platform_communications 2018-01-23T00:08:35.488Z,1516666115.488 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = 0.000000, longitudeAccuracy_ = 0.000000, depthAccuracy_ = nan 2018-01-23T00:08:35.488Z,1516666115.488 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 1 2018-01-23T00:08:35.488Z,1516666115.488 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T00:08:35.500Z,1516666115.500 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T00:08:35.921Z,1516666115.921 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T00:08:35.921Z,1516666115.921 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 1 2018-01-23T00:08:36.282Z,1516666116.282 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T00:08:36.282Z,1516666116.282 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T00:08:36.287Z,1516666116.287 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T00:08:41.352Z,1516666121.352 [DataOverHttps](INFO): setting available, lastComms_.elapsed()=0.003867 2018-01-23T00:08:45.557Z,1516666125.557 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180122T234648/Courier0016.lzma 2018-01-23T00:08:46.317Z,1516666126.317 [DataOverHttps](INFO): Moved sent file to Logs/20180122T234648/Courier0016.lzma.bak 2018-01-23T00:08:46.317Z,1516666126.317 [DataOverHttps](INFO): SBD MOMSN=7753157 2018-01-23T00:08:50.476Z,1516666130.476 [Startup:StartupSatComms:B](INFO): Timed out from 2018-01-23T00:07:49.5Z 2018-01-23T00:08:50.476Z,1516666130.476 [Startup:StartupSatComms:B] Stopped 2018-01-23T00:08:50.476Z,1516666130.476 [Startup:StartupSatComms](INFO): Completed Startup:StartupSatComms 2018-01-23T00:08:50.476Z,1516666130.476 [Startup:StartupSatComms] Stopped 2018-01-23T00:08:50.476Z,1516666130.476 [Startup:StartupSatComms](DEBUG): Aggregate::uninitialize Startup:StartupSatComms 2018-01-23T00:08:50.477Z,1516666130.477 [Startup](INFO): Completed Startup 2018-01-23T00:08:50.477Z,1516666130.477 [MissionManager](INFO): Startup is completed. 2018-01-23T00:08:50.477Z,1516666130.477 [MissionManager](INFO): Uninitializing Mission Startup 2018-01-23T00:08:50.477Z,1516666130.477 [Startup] Stopped 2018-01-23T00:08:50.478Z,1516666130.478 [Startup](DEBUG): Aggregate::uninitialize Startup 2018-01-23T00:08:50.478Z,1516666130.478 [Startup:A.GoToSurface] Stopped 2018-01-23T00:08:50.478Z,1516666130.478 [Startup:A.GoToSurface](DEBUG): Uninitialize GoToSurfaceComponent. 2018-01-23T00:08:50.655Z,1516666130.655 [MissionManager](IMPORTANT): Started mission Default 2018-01-23T00:08:50.655Z,1516666130.655 [Default] Running Loop=1 2018-01-23T00:08:50.655Z,1516666130.655 [Default](DEBUG): Aggregate::initialize Default 2018-01-23T00:08:50.655Z,1516666130.655 [Default:B.GoToSurface] Running Loop=1 2018-01-23T00:08:50.655Z,1516666130.655 [Default:B.GoToSurface](DEBUG): Initialize GoToSurfaceComponent. 2018-01-23T00:08:50.656Z,1516666130.656 [Default:B.GoToSurface](DEBUG): No depth rate setting specified. Using default value of nan m/s. 2018-01-23T00:08:50.656Z,1516666130.656 [Default:B.GoToSurface](DEBUG): No pitch setting specified. Using default value of nan degrees. 2018-01-23T00:08:50.656Z,1516666130.656 [Default:B.GoToSurface](DEBUG): No speed setting specified. Using default value of 1.000000 m/s. 2018-01-23T00:08:50.657Z,1516666130.657 [Default:B.GoToSurface](DEBUG): No pitch timeout specified. Using default value of 20.000000 seconds. 2018-01-23T00:08:50.657Z,1516666130.657 [Default:B.GoToSurface](DEBUG): No surface timeout specified. Using default value of 1000.000000 seconds. 2018-01-23T00:08:50.657Z,1516666130.657 [Default:A.Wait] Running Loop=1 2018-01-23T00:08:50.657Z,1516666130.657 [Default:A.Wait](DEBUG): Initialize Wait Component. 2018-01-23T00:08:55.527Z,1516666135.527 [DataOverHttps](INFO): Sending 205 bytes from file Logs/20180123T000528/Courier0000.lzma 2018-01-23T00:08:56.276Z,1516666136.276 [DataOverHttps](INFO): Moved sent file to Logs/20180123T000528/Courier0000.lzma.bak 2018-01-23T00:08:56.276Z,1516666136.276 [DataOverHttps](INFO): SBD MOMSN=7753159 2018-01-23T00:09:03.926Z,1516666143.926 [Default:A.Wait](INFO): Done Waiting. 2018-01-23T00:09:03.926Z,1516666143.926 [Default:A.Wait] Stopped 2018-01-23T00:09:03.926Z,1516666143.926 [Default:A.Wait](DEBUG): Uninitialize Wait Component. 2018-01-23T00:09:04.330Z,1516666144.330 [Default:CheckIn] Running Loop=1 2018-01-23T00:09:04.331Z,1516666144.331 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-01-23T00:09:04.331Z,1516666144.331 [Default:CheckIn:Read_GPS] Running Loop=1 2018-01-23T00:09:04.736Z,1516666144.736 [Default:CheckIn:Read_GPS](DEBUG): Initialize ReadDataComponent to sense time_fix 2018-01-23T00:09:58.505Z,1516666198.505 [PNI_TCM](ERROR): CRC does not match. Expected:0x61927 got:0x1797 2018-01-23T00:10:00.101Z,1516666200.101 [PNI_TCM](ERROR): CRC does not match. Expected:0x11509 got:0x166 2018-01-23T00:10:04.908Z,1516666204.908 [PNI_TCM](ERROR): CRC does not match. Expected:0x20207 got:0x17176 2018-01-23T00:10:06.917Z,1516666206.917 [PNI_TCM](ERROR): CRC does not match. Expected:0x56135 got:0x17437 2018-01-23T00:10:45.684Z,1516666245.684 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:10:46.080Z,1516666246.080 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:10:46.484Z,1516666246.484 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:10:46.884Z,1516666246.884 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:10:47.291Z,1516666247.291 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:10:47.703Z,1516666247.703 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:10:48.095Z,1516666248.095 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:10:48.491Z,1516666248.491 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:10:48.884Z,1516666248.884 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:10:49.284Z,1516666249.284 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:10:49.678Z,1516666249.678 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:10:50.084Z,1516666250.084 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:10:50.495Z,1516666250.495 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:10:50.885Z,1516666250.885 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:10:51.292Z,1516666251.292 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:10:51.696Z,1516666251.696 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:10:52.096Z,1516666252.096 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:10:52.511Z,1516666252.511 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:10:55.790Z,1516666255.790 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:10:55.916Z,1516666255.916 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:10:56.267Z,1516666256.267 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:10:56.641Z,1516666256.641 [DataOverHttps](IMPORTANT): SBD MTMSN=20180123T000921 2018-01-23T00:10:56.680Z,1516666256.680 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:10:57.058Z,1516666257.058 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:10:57.470Z,1516666257.470 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:11:00.758Z,1516666260.758 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:11:00.858Z,1516666260.858 [DataOverHttps](INFO): Received command:sched asap "load Science/chlpeak_sampling_InAboveBelow.xml;set DriftOrDonutAtChlPeak.NumESPSamplers 1 count;set DriftOrDonutAtChlPeak.NeedCommsTimeInTransect 120 minute;set DriftOrDonutAtChlPeak.AcousticTrackingTimeout 5 minute" 2s0e7 1 2 2018-01-23T00:11:00.895Z,1516666260.895 [CommandLine](IMPORTANT): got command schedule asap "load Science/chlpeak_sampling_InAboveBelow.xml;set DriftOrDonutAtChlPeak.NumESPSamplers 1 count;set DriftOrDonutAtChlPeak.NeedCommsTimeInTransect 120 minute;set DriftOrDonutAtChlPeak.AcousticTrackingTimeout 5 minute" 2s0e7 1 2.000000 2018-01-23T00:11:00.896Z,1516666260.896 [CommandLine](IMPORTANT): Scheduling command #1 of 2 with id=2s0e7 2018-01-23T00:11:00.897Z,1516666260.897 [CommandLine](IMPORTANT): Scheduled #1 (#1 of 2 with id='2s0e7'): "load Science/chlpeak_sampling_InAboveBelow.xml;set DriftOrDonutAtChlPeak.NumESPSamplers 1 count;set DriftOrDonutAtChlPeak.NeedCommsTimeInTransect 120 minute;set DriftOrDonutAtChlPeak.AcousticTrackingTimeout 5 minute" ASAP 2018-01-23T00:11:00.944Z,1516666260.944 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:11:01.256Z,1516666261.256 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:11:01.605Z,1516666261.605 [DataOverHttps](IMPORTANT): SBD MTMSN=20180123T000926 2018-01-23T00:11:01.660Z,1516666261.660 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:11:02.027Z,1516666262.027 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:11:02.439Z,1516666262.439 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:11:05.741Z,1516666265.741 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:11:05.843Z,1516666265.843 [DataOverHttps](INFO): Received command:sched asap "set DriftOrDonutAtChlPeak.SpeedFindHighChlLatLon 0 meter_per_second;set DriftOrDonutAtChlPeak.SpeedChlPeakHoldingSampling 0 meter_per_second;set DriftOrDonutAtChlPeak.SpeedSpiral 0 meter_per_second;run " 2s0e7 2 2 2018-01-23T00:11:05.897Z,1516666265.897 [CommandLine](IMPORTANT): got command schedule asap "set DriftOrDonutAtChlPeak.SpeedFindHighChlLatLon 0 meter_per_second;set DriftOrDonutAtChlPeak.SpeedChlPeakHoldingSampling 0 meter_per_second;set DriftOrDonutAtChlPeak.SpeedSpiral 0 meter_per_second;run " 2s0e7 2 2.000000 2018-01-23T00:11:05.898Z,1516666265.898 [CommandLine](IMPORTANT): Scheduling command #2 of 2 with id=2s0e7 2018-01-23T00:11:05.899Z,1516666265.899 [CommandLine](IMPORTANT): Scheduled #2 (#2 of 2 with id='2s0e7'): "set DriftOrDonutAtChlPeak.SpeedFindHighChlLatLon 0 meter_per_second;set DriftOrDonutAtChlPeak.SpeedChlPeakHoldingSampling 0 meter_per_second;set DriftOrDonutAtChlPeak.SpeedSpiral 0 meter_per_second;run " ASAP 2018-01-23T00:11:05.907Z,1516666265.907 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:11:05.976Z,1516666265.976 [CommandLine](IMPORTANT): got command load ./Missions/Science/chlpeak_sampling_InAboveBelow.xml 2018-01-23T00:11:05.976Z,1516666265.976 [MissionManager](INFO): Loading Mission: ./Missions/Science/chlpeak_sampling_InAboveBelow.xml 2018-01-23T00:11:06.272Z,1516666266.272 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:11:06.625Z,1516666266.625 [DataOverHttps](IMPORTANT): SBD MTMSN=20180123T000931 2018-01-23T00:11:06.680Z,1516666266.680 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:11:07.045Z,1516666267.045 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:11:07.248Z,1516666267.248 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak.NumESPSamplers = 9.000000 count 2018-01-23T00:11:07.271Z,1516666267.271 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak.MissionTimeout = 20.000000 h 2018-01-23T00:11:07.275Z,1516666267.275 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak.NeedCommsTimeInTransect = 60.000000 min 2018-01-23T00:11:07.278Z,1516666267.278 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak.AcousticTrackingTimeout = 21.000000 h 2018-01-23T00:11:07.281Z,1516666267.281 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak.MaxWaitNoFiring = 4.000000 h 2018-01-23T00:11:07.285Z,1516666267.285 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak.CylinderTimeout = 60.000000 min 2018-01-23T00:11:07.288Z,1516666267.288 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak.WaitDepthUndulation = 10.000000 min 2018-01-23T00:11:07.292Z,1516666267.292 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak.FindHighChlLocation = 1 bool 2018-01-23T00:11:07.295Z,1516666267.295 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak.CylinderYoYo = 1 bool 2018-01-23T00:11:07.299Z,1516666267.299 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak.SpeedFindHighChlLatLon = 1.000000 m/s 2018-01-23T00:11:07.302Z,1516666267.302 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak.SpeedChlPeakHoldingSampling = 1.000000 m/s 2018-01-23T00:11:07.322Z,1516666267.322 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak.SpeedSpiral = 1.000000 m/s 2018-01-23T00:11:07.329Z,1516666267.329 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak.MaxDepth = 50.000000 m 2018-01-23T00:11:07.334Z,1516666267.334 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak.ShallowBoundChl = 4.500000 m 2018-01-23T00:11:07.346Z,1516666267.346 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak.DeepBoundChl = 27.000000 m 2018-01-23T00:11:07.357Z,1516666267.357 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak.CylinderYoYoMinDep = 4.500000 m 2018-01-23T00:11:07.375Z,1516666267.375 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak.CylinderYoYoMaxDep = 27.000000 m 2018-01-23T00:11:07.378Z,1516666267.378 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak.CylinderRadius = 200.000000 m 2018-01-23T00:11:07.400Z,1516666267.400 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak.MaxCirclesOnCylinder = 1.000000 count 2018-01-23T00:11:07.406Z,1516666267.406 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak.RepeatTransects = 1.000000 count 2018-01-23T00:11:07.409Z,1516666267.409 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak.Lat1 = nan arcdeg 2018-01-23T00:11:07.447Z,1516666267.447 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:11:07.460Z,1516666267.460 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak.Lon1 = nan arcdeg 2018-01-23T00:11:07.469Z,1516666267.469 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak.Lat2 = nan arcdeg 2018-01-23T00:11:07.484Z,1516666267.484 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak.Lon2 = nan arcdeg 2018-01-23T00:11:07.492Z,1516666267.492 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak.Lat3 = nan arcdeg 2018-01-23T00:11:07.503Z,1516666267.503 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak.Lon3 = nan arcdeg 2018-01-23T00:11:07.519Z,1516666267.519 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak.Lat4 = nan arcdeg 2018-01-23T00:11:07.522Z,1516666267.522 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak.Lon4 = nan arcdeg 2018-01-23T00:11:07.538Z,1516666267.538 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak.VertDist1 = nan m 2018-01-23T00:11:07.546Z,1516666267.546 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak.VertDist2 = nan m 2018-01-23T00:11:07.566Z,1516666267.566 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak.VertDist3 = nan m 2018-01-23T00:11:07.576Z,1516666267.576 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak.VertDist4 = nan m 2018-01-23T00:11:07.595Z,1516666267.595 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak.VertDist5 = nan m 2018-01-23T00:11:07.603Z,1516666267.603 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak.VertDist6 = nan m 2018-01-23T00:11:07.606Z,1516666267.606 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak.VertDist7 = nan m 2018-01-23T00:11:07.614Z,1516666267.614 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak.VertDist8 = nan m 2018-01-23T00:11:07.625Z,1516666267.625 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak.VertDist9 = nan m 2018-01-23T00:11:07.631Z,1516666267.631 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak.VertDist10 = nan m 2018-01-23T00:11:07.640Z,1516666267.640 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak.VertDist11 = nan m 2018-01-23T00:11:07.647Z,1516666267.647 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak.VertDist12 = nan m 2018-01-23T00:11:07.659Z,1516666267.659 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak.VertDist13 = nan m 2018-01-23T00:11:07.662Z,1516666267.662 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak.VertDist14 = nan m 2018-01-23T00:11:07.670Z,1516666267.670 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak.VertDist15 = nan m 2018-01-23T00:11:07.677Z,1516666267.677 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak.VertDist16 = nan m 2018-01-23T00:11:07.686Z,1516666267.686 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak.VertDist17 = nan m 2018-01-23T00:11:07.698Z,1516666267.698 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak.VertDist18 = nan m 2018-01-23T00:11:07.706Z,1516666267.706 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak.VertDist19 = nan m 2018-01-23T00:11:07.718Z,1516666267.718 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak.VertDist20 = nan m 2018-01-23T00:11:07.721Z,1516666267.721 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak.Dep1 = nan m 2018-01-23T00:11:07.737Z,1516666267.737 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak.Dep2 = nan m 2018-01-23T00:11:07.742Z,1516666267.742 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak.Dep3 = nan m 2018-01-23T00:11:07.753Z,1516666267.753 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak.Dep4 = nan m 2018-01-23T00:11:07.758Z,1516666267.758 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak.Dep5 = nan m 2018-01-23T00:11:07.777Z,1516666267.777 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak.Dep6 = nan m 2018-01-23T00:11:07.790Z,1516666267.790 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak.Dep7 = nan m 2018-01-23T00:11:07.802Z,1516666267.802 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak.Dep8 = nan m 2018-01-23T00:11:07.806Z,1516666267.806 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak.Dep9 = nan m 2018-01-23T00:11:07.863Z,1516666267.863 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak.Dep10 = nan m 2018-01-23T00:11:07.872Z,1516666267.872 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak.Dep11 = nan m 2018-01-23T00:11:07.884Z,1516666267.884 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak.Dep12 = nan m 2018-01-23T00:11:07.894Z,1516666267.894 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak.Dep13 = nan m 2018-01-23T00:11:07.897Z,1516666267.897 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak.Dep14 = nan m 2018-01-23T00:11:07.910Z,1516666267.910 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak.Dep15 = nan m 2018-01-23T00:11:07.913Z,1516666267.913 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak.Dep16 = nan m 2018-01-23T00:11:07.944Z,1516666267.944 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak.Dep17 = nan m 2018-01-23T00:11:07.948Z,1516666267.948 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak.Dep18 = nan m 2018-01-23T00:11:07.967Z,1516666267.967 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak.Dep19 = nan m 2018-01-23T00:11:07.971Z,1516666267.971 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak.Dep20 = nan m 2018-01-23T00:11:07.977Z,1516666267.977 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak.Reacq1 = 0 bool 2018-01-23T00:11:07.995Z,1516666267.995 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak.Reacq2 = 0 bool 2018-01-23T00:11:07.998Z,1516666267.998 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak.Reacq3 = 0 bool 2018-01-23T00:11:08.001Z,1516666268.001 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak.Reacq4 = 0 bool 2018-01-23T00:11:08.032Z,1516666268.032 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak.Reacq5 = 0 bool 2018-01-23T00:11:08.035Z,1516666268.035 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak.Reacq6 = 0 bool 2018-01-23T00:11:08.038Z,1516666268.038 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak.Reacq7 = 0 bool 2018-01-23T00:11:08.061Z,1516666268.061 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak.Reacq8 = 0 bool 2018-01-23T00:11:08.064Z,1516666268.064 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak.Reacq9 = 0 bool 2018-01-23T00:11:08.084Z,1516666268.084 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak.Reacq10 = 0 bool 2018-01-23T00:11:08.087Z,1516666268.087 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak.Reacq11 = 0 bool 2018-01-23T00:11:08.090Z,1516666268.090 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak.Reacq12 = 0 bool 2018-01-23T00:11:08.109Z,1516666268.109 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak.Reacq13 = 0 bool 2018-01-23T00:11:08.112Z,1516666268.112 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak.Reacq14 = 0 bool 2018-01-23T00:11:08.139Z,1516666268.139 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak.Reacq15 = 0 bool 2018-01-23T00:11:08.142Z,1516666268.142 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak.Reacq16 = 0 bool 2018-01-23T00:11:08.145Z,1516666268.145 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak.Reacq17 = 0 bool 2018-01-23T00:11:08.168Z,1516666268.168 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak.Reacq18 = 0 bool 2018-01-23T00:11:08.172Z,1516666268.172 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak.Reacq19 = 0 bool 2018-01-23T00:11:08.204Z,1516666268.204 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak.Reacq20 = 0 bool 2018-01-23T00:11:08.207Z,1516666268.207 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak.RptSurface1 = 0 bool 2018-01-23T00:11:08.210Z,1516666268.210 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak.RptSurface2 = 0 bool 2018-01-23T00:11:08.235Z,1516666268.235 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak.RptSurface3 = 0 bool 2018-01-23T00:11:08.241Z,1516666268.241 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak.RptSurface4 = 0 bool 2018-01-23T00:11:08.245Z,1516666268.245 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak.RptSurface5 = 0 bool 2018-01-23T00:11:08.257Z,1516666268.257 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak.RptSurface6 = 0 bool 2018-01-23T00:11:08.260Z,1516666268.260 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak.RptSurface7 = 0 bool 2018-01-23T00:11:08.283Z,1516666268.283 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak.RptSurface8 = 0 bool 2018-01-23T00:11:08.286Z,1516666268.286 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak.RptSurface9 = 0 bool 2018-01-23T00:11:08.289Z,1516666268.289 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak.RptSurface10 = 0 bool 2018-01-23T00:11:08.312Z,1516666268.312 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak.RptSurface11 = 0 bool 2018-01-23T00:11:08.316Z,1516666268.316 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak.RptSurface12 = 0 bool 2018-01-23T00:11:08.335Z,1516666268.335 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak.RptSurface13 = 0 bool 2018-01-23T00:11:08.338Z,1516666268.338 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak.RptSurface14 = 0 bool 2018-01-23T00:11:08.341Z,1516666268.341 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak.RptSurface15 = 0 bool 2018-01-23T00:11:08.364Z,1516666268.364 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak.RptSurface16 = 0 bool 2018-01-23T00:11:08.367Z,1516666268.367 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak.RptSurface17 = 0 bool 2018-01-23T00:11:08.370Z,1516666268.370 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak.RptSurface18 = 0 bool 2018-01-23T00:11:08.419Z,1516666268.419 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak.RptSurface19 = 0 bool 2018-01-23T00:11:08.422Z,1516666268.422 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak.RptSurface20 = 0 bool 2018-01-23T00:11:08.457Z,1516666268.457 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak.UpRate = -0.040000 m/s 2018-01-23T00:11:08.461Z,1516666268.461 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak.DownRate = 0.200000 m/s 2018-01-23T00:11:08.481Z,1516666268.481 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak.YoYoMinAltitude = 9.000000 m 2018-01-23T00:11:08.484Z,1516666268.484 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak.MinAltitude = 7.000000 m 2018-01-23T00:11:08.524Z,1516666268.524 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak.MinOffshore = 2.000000 km 2018-01-23T00:11:08.535Z,1516666268.535 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak.VertMargin = 3.000000 m 2018-01-23T00:11:08.555Z,1516666268.555 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak.VerticalPerturbation = 6.000000 m 2018-01-23T00:11:08.558Z,1516666268.558 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak.VerticalTolerance = 0.100000 m 2018-01-23T00:11:08.574Z,1516666268.574 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak.RiseFromTurningDepth = 1.500000 m 2018-01-23T00:11:08.590Z,1516666268.590 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak.CylinderCircleMaxError = 100.000000 m 2018-01-23T00:11:08.606Z,1516666268.606 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak.CylinderCircleTurnToPort = 0 bool 2018-01-23T00:11:08.651Z,1516666268.651 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak.KwpHeading = 0.010000 rad/m 2018-01-23T00:11:08.654Z,1516666268.654 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak.YoYoUpPitch = 20.000000 arcdeg 2018-01-23T00:11:08.670Z,1516666268.670 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak.YoYoDownPitch = -20.000000 arcdeg 2018-01-23T00:11:08.685Z,1516666268.685 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak.RudderAngleSpiral = 13.000000 arcdeg 2018-01-23T00:11:08.709Z,1516666268.709 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak.NumberOfProfilesSlidingwindow = 100.000000 count 2018-01-23T00:11:08.712Z,1516666268.712 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak.LPWindowLength = 40.000000 count 2018-01-23T00:11:08.741Z,1516666268.741 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak.BuoyancyNeutral = 180.000003 cc 2018-01-23T00:11:08.745Z,1516666268.745 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak.MassDefault = 1.500000 cm 2018-01-23T00:11:08.768Z,1516666268.768 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak.YoYoMinDepth = 4.500000 m 2018-01-23T00:11:08.772Z,1516666268.772 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak.YoYoMaxDepth = 27.000000 m 2018-01-23T00:11:08.815Z,1516666268.815 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak.DepthSet = 10.000000 m 2018-01-23T00:11:08.819Z,1516666268.819 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak.DepthDesignated = nan m 2018-01-23T00:11:08.823Z,1516666268.823 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak.VertDistance = nan m 2018-01-23T00:11:08.829Z,1516666268.829 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak.ReportAtSurface = 0 bool 2018-01-23T00:11:08.851Z,1516666268.851 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak.ReportAtSurfaceDone = 0 bool 2018-01-23T00:11:08.855Z,1516666268.855 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak.ReportAtSurfaceToUse = 0 bool 2018-01-23T00:11:08.858Z,1516666268.858 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak.ReacquirePeak = 0 bool 2018-01-23T00:11:08.881Z,1516666268.881 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak.SampleOptionsSet = 0 bool 2018-01-23T00:11:08.892Z,1516666268.892 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak.SampleCompleted = 0 bool 2018-01-23T00:11:08.895Z,1516666268.895 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak.StoppedForNoFiringForTooLong = 0 bool 2018-01-23T00:11:08.927Z,1516666268.927 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak.DepthLogged = 0.000000 m 2018-01-23T00:11:08.930Z,1516666268.930 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak.ChlLogged = 0.000000 ug/l 2018-01-23T00:11:08.933Z,1516666268.933 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak.StartVerticalManeuverForChlPeakSampling = 0 bool 2018-01-23T00:11:08.976Z,1516666268.976 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak.Surfacing = 0 bool 2018-01-23T00:11:08.980Z,1516666268.980 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak.FlagTargetDepthSet = 0 bool 2018-01-23T00:11:09.003Z,1516666269.003 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak.FlagGoUp = 0 bool 2018-01-23T00:11:09.032Z,1516666269.032 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak.FlagGoDown = 0 bool 2018-01-23T00:11:09.035Z,1516666269.035 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak.FlagDiveFromSurface = 1 bool 2018-01-23T00:11:09.045Z,1516666269.045 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak.FlagPeakDepthSet = 0 bool 2018-01-23T00:11:09.054Z,1516666269.054 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak.EnableSettingPeakDepth = 1 bool 2018-01-23T00:11:09.074Z,1516666269.074 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak.FlagFirstDive = 1 bool 2018-01-23T00:11:09.077Z,1516666269.077 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak.FlagSamplingOngoing = 0 bool 2018-01-23T00:11:09.104Z,1516666269.104 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak.FlagFired = 0 bool 2018-01-23T00:11:09.108Z,1516666269.108 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak.PeakChlDepthSet = 10.000000 m 2018-01-23T00:11:09.135Z,1516666269.135 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak.PeakChlSet = 0.000000 ug/l 2018-01-23T00:11:09.166Z,1516666269.166 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak.DepthHeld = 10.000000 m 2018-01-23T00:11:09.170Z,1516666269.170 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak.SyslogGoUp = 0 bool 2018-01-23T00:11:09.173Z,1516666269.173 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak.SyslogGoDown = 0 bool 2018-01-23T00:11:09.187Z,1516666269.187 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak.SyslogHoldDepth = 0 bool 2018-01-23T00:11:09.190Z,1516666269.190 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak.FromLastTimeFixToStartVerticalManeuver = nan min 2018-01-23T00:11:09.230Z,1516666269.230 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak.FromLastTimeFixToNow = nan min 2018-01-23T00:11:09.233Z,1516666269.233 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak.FromLastTimeFixToLastFiring = nan min 2018-01-23T00:11:09.265Z,1516666269.265 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak.CylinderLat = nan arcdeg 2018-01-23T00:11:09.272Z,1516666269.272 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak.CylinderLon = nan arcdeg 2018-01-23T00:11:09.305Z,1516666269.305 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak.CntSamples = 1.000000 count 2018-01-23T00:11:09.305Z,1516666269.305 [MissionManager](INFO): Inserting Stack: Missions/Insert/StandardEnvelopes.xml 2018-01-23T00:11:09.350Z,1516666269.350 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak:StandardEnvelopes.MinAltitude = 5.000000 m 2018-01-23T00:11:09.373Z,1516666269.373 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak:StandardEnvelopes.MaxDepth = 200.000000 m 2018-01-23T00:11:09.376Z,1516666269.376 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak:StandardEnvelopes.MinOffshore = 2000.000000 m 2018-01-23T00:11:09.377Z,1516666269.377 [DriftOrDonutAtChlPeak:StandardEnvelopes:A.AltitudeEnvelope](DEBUG): Construct AltitudeEnvelope. 2018-01-23T00:11:09.419Z,1516666269.419 [DriftOrDonutAtChlPeak:StandardEnvelopes:B.DepthEnvelope](DEBUG): Construct DepthEnvelope. 2018-01-23T00:11:09.468Z,1516666269.468 [DriftOrDonutAtChlPeak:StandardEnvelopes:C.OffshoreEnvelope](DEBUG): Construct OffshoreEnvelope. 2018-01-23T00:11:09.486Z,1516666269.486 [MissionManager](INFO): Inserting Stack: Missions/Insert/AbortDrift.xml 2018-01-23T00:11:09.541Z,1516666269.541 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak:AbortDrift.AcousticTimeout = 96.000000 h 2018-01-23T00:11:09.563Z,1516666269.563 [DriftOrDonutAtChlPeak:AbortDrift:B.AbortDrift](DEBUG): Construct AbortDrift. 2018-01-23T00:11:09.565Z,1516666269.565 [DriftOrDonutAtChlPeak:AbortDrift:C.Execute](DEBUG): Construct Execute. 2018-01-23T00:11:09.568Z,1516666269.568 [MissionManager](INFO): RedefineArg DriftOrDonutAtChlPeak:AbortDrift.AcousticTimeout = reader:DriftOrDonutAtChlPeak.AcousticTrackingTimeout 2018-01-23T00:11:09.568Z,1516666269.568 [MissionManager](INFO): Inserting Stack: Missions/Insert/SampleAtDepth.xml 2018-01-23T00:11:09.709Z,1516666269.709 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak:SampleAtDepth.TargetDepth = 5.000000 m 2018-01-23T00:11:09.724Z,1516666269.724 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak:SampleAtDepth.SettleTime = 30.000000 s 2018-01-23T00:11:09.739Z,1516666269.739 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak:SampleAtDepth.RotateOnly = 0.000000 bool 2018-01-23T00:11:09.751Z,1516666269.751 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak:SampleAtDepth.UseCANONSampler = 0.000000 bool 2018-01-23T00:11:09.763Z,1516666269.763 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak:SampleAtDepth.UseESP = 1.000000 bool 2018-01-23T00:11:09.779Z,1516666269.779 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak:SampleAtDepth.CANONSamplerTriggerTimeout = 1.000000 min 2018-01-23T00:11:09.789Z,1516666269.789 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak:SampleAtDepth.CANONSamplerTimeout = 6.000000 min 2018-01-23T00:11:09.807Z,1516666269.807 [DriftOrDonutAtChlPeak:SampleAtDepth:B.Pitch](DEBUG): Construct. 2018-01-23T00:11:09.831Z,1516666269.831 [DriftOrDonutAtChlPeak:SampleAtDepth:D.Wait](DEBUG): Construct Wait. 2018-01-23T00:11:09.865Z,1516666269.865 [DriftOrDonutAtChlPeak:SampleAtDepth:SampleWrapper:SampleCANONSampler:TriggerCANONSampler:A_Timeout:B.Execute](DEBUG): Construct Execute. 2018-01-23T00:11:09.876Z,1516666269.876 [MissionManager](ERROR): Slate does not contain CTD_NeilBrown.bin_mean_sea_water_temperature 2018-01-23T00:11:09.876Z,1516666269.876 [MissionManager](ERROR): Slate does not contain celsius 2018-01-23T00:11:09.893Z,1516666269.893 [DriftOrDonutAtChlPeak:SampleAtDepth:SampleWrapper:SampleCANONSampler:E:A_Timeout:B.Execute](DEBUG): Construct Execute. 2018-01-23T00:11:09.906Z,1516666269.906 [MissionManager](ERROR): Slate does not contain CTD_NeilBrown.bin_mean_sea_water_temperature 2018-01-23T00:11:09.923Z,1516666269.923 [MissionManager](ERROR): Slate does not contain celsius 2018-01-23T00:11:09.928Z,1516666269.928 [DriftOrDonutAtChlPeak:H.Pitch](DEBUG): Construct. 2018-01-23T00:11:09.960Z,1516666269.960 [MissionManager](INFO): Inserting Stack: Missions/Insert/Science.xml 2018-01-23T00:11:10.314Z,1516666270.314 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak:Science.SampleISUS = 0 bool 2018-01-23T00:11:10.333Z,1516666270.333 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak:Science.SampleISUSmaxPitch = 60.000000 arcdeg 2018-01-23T00:11:10.336Z,1516666270.336 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak:Science.SampleISUSminPitch = -60.000000 arcdeg 2018-01-23T00:11:10.363Z,1516666270.363 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak:Science.PeakDetectChlActive = 0 bool 2018-01-23T00:11:10.366Z,1516666270.366 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak:Science.HighestChlPeakReportActive = 0 bool 2018-01-23T00:11:10.369Z,1516666270.369 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak:Science.PatchTracking = 0 bool 2018-01-23T00:11:10.388Z,1516666270.388 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak:Science.FilterWidthHorizontal = 3.000000 count 2018-01-23T00:11:10.392Z,1516666270.392 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak:Science.NumProfilesSlidingwindow = 100.000000 count 2018-01-23T00:11:10.411Z,1516666270.411 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak:Science.PeakDetectNO3Active = 0 bool 2018-01-23T00:11:10.414Z,1516666270.414 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak:Science.PeakDetectOilActive = 0 bool 2018-01-23T00:11:10.417Z,1516666270.417 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak:Science.UpwardDerivativeOfTemperatureActive = 0 bool 2018-01-23T00:11:10.443Z,1516666270.443 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak:Science.EnabledAanderaaO2 = 1.000000 bool 2018-01-23T00:11:10.475Z,1516666270.475 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak:Science.EnabledNeilBrown = 0.000000 bool 2018-01-23T00:11:10.491Z,1516666270.491 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak:Science.EnabledSeabird = 1.000000 bool 2018-01-23T00:11:10.495Z,1516666270.495 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak:Science.EnabledTurbulence_NPS = 0.000000 bool 2018-01-23T00:11:10.498Z,1516666270.498 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak:Science.EnabledWetLabsBB2FL = 1.000000 bool 2018-01-23T00:11:10.515Z,1516666270.515 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak:Science.EnabledWetLabsSeaOWL_UV_A = 1.000000 bool 2018-01-23T00:11:10.527Z,1516666270.527 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak:Science.EnabledISUS = 0.000000 bool 2018-01-23T00:11:10.533Z,1516666270.533 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak:Science.LowPassWindowLength = 20.000000 count 2018-01-23T00:11:10.538Z,1516666270.538 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak:Science.PeakChlShallowBound = nan m 2018-01-23T00:11:10.550Z,1516666270.550 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak:Science.PeakChlDeepBound = nan m 2018-01-23T00:11:10.553Z,1516666270.553 [MissionManager](INFO): DefineOutput DriftOrDonutAtChlPeak:Science.PeakChl = 0.000000 ug/l 2018-01-23T00:11:10.585Z,1516666270.585 [MissionManager](INFO): DefineOutput DriftOrDonutAtChlPeak:Science.PeakChlDepth = 0.000000 m 2018-01-23T00:11:10.588Z,1516666270.588 [MissionManager](INFO): DefineOutput DriftOrDonutAtChlPeak:Science.PeakChlTemperature = 0.000000 degC 2018-01-23T00:11:10.616Z,1516666270.616 [MissionManager](INFO): DefineOutput DriftOrDonutAtChlPeak:Science.PeakChlLatitude = nan arcdeg 2018-01-23T00:11:10.619Z,1516666270.619 [MissionManager](INFO): DefineOutput DriftOrDonutAtChlPeak:Science.PeakChlLongitude = nan arcdeg 2018-01-23T00:11:10.638Z,1516666270.638 [MissionManager](INFO): DefineOutput DriftOrDonutAtChlPeak:Science.PeakNO3 = 0.000000 umol/l 2018-01-23T00:11:10.651Z,1516666270.651 [MissionManager](INFO): DefineOutput DriftOrDonutAtChlPeak:Science.PeakNO3Depth = 0.000000 m 2018-01-23T00:11:10.675Z,1516666270.675 [MissionManager](INFO): DefineOutput DriftOrDonutAtChlPeak:Science.PeakNO3Latitude = nan arcdeg 2018-01-23T00:11:10.687Z,1516666270.687 [MissionManager](INFO): DefineOutput DriftOrDonutAtChlPeak:Science.PeakNO3Longitude = nan arcdeg 2018-01-23T00:11:10.697Z,1516666270.697 [MissionManager](INFO): DefineOutput DriftOrDonutAtChlPeak:Science.PatchChl = 0.000000 m 2018-01-23T00:11:10.701Z,1516666270.701 [MissionManager](INFO): DefineOutput DriftOrDonutAtChlPeak:Science.PatchChlDepth = 0.000000 m 2018-01-23T00:11:10.732Z,1516666270.732 [MissionManager](INFO): DefineOutput DriftOrDonutAtChlPeak:Science.PatchChlLatitude = nan arcdeg 2018-01-23T00:11:10.736Z,1516666270.736 [MissionManager](INFO): DefineOutput DriftOrDonutAtChlPeak:Science.PatchChlLongitude = nan arcdeg 2018-01-23T00:11:10.759Z,1516666270.759 [MissionManager](INFO): DefineOutput DriftOrDonutAtChlPeak:Science.PatchChlDistance = nan arcdeg 2018-01-23T00:11:10.763Z,1516666270.763 [MissionManager](INFO): DefineOutput DriftOrDonutAtChlPeak:Science.PeakOil = 0.000000 kg/m3 2018-01-23T00:11:10.766Z,1516666270.766 [MissionManager](INFO): DefineOutput DriftOrDonutAtChlPeak:Science.PeakOilDepth = 0.000000 m 2018-01-23T00:11:10.777Z,1516666270.777 [MissionManager](INFO): DefineOutput DriftOrDonutAtChlPeak:Science.PeakOilLatitude = nan arcdeg 2018-01-23T00:11:10.781Z,1516666270.781 [MissionManager](INFO): DefineOutput DriftOrDonutAtChlPeak:Science.PeakOilLongitude = nan arcdeg 2018-01-23T00:11:10.855Z,1516666270.855 [DriftOrDonutAtChlPeak:Science:PeakDetectChl:A.PeakDetectVsDepth](DEBUG): Construct PeakDetectVsDepth. 2018-01-23T00:11:10.901Z,1516666270.901 [DriftOrDonutAtChlPeak:Science:HighestChlPeakReport:A.PeakDetectHorizontal](DEBUG): Construct PeakDetectHorizontal. 2018-01-23T00:11:10.946Z,1516666270.946 [DriftOrDonutAtChlPeak:Science:PeakDetectNO3:A.PeakDetectVsDepth](DEBUG): Construct PeakDetectVsDepth. 2018-01-23T00:11:10.966Z,1516666270.966 [DriftOrDonutAtChlPeak:Science:PeakDetectOil:A.PeakDetectVsDepth](DEBUG): Construct PeakDetectVsDepth. 2018-01-23T00:11:11.005Z,1516666271.005 [MissionManager](INFO): RedefineArg DriftOrDonutAtChlPeak:Science.PeakDetectChlActive = value:1 bool 2018-01-23T00:11:11.015Z,1516666271.015 [MissionManager](INFO): RedefineArg DriftOrDonutAtChlPeak:Science.HighestChlPeakReportActive = value:1 bool 2018-01-23T00:11:11.017Z,1516666271.017 [MissionManager](INFO): RedefineArg DriftOrDonutAtChlPeak:Science.LowPassWindowLength = reader:DriftOrDonutAtChlPeak.LPWindowLength 2018-01-23T00:11:11.031Z,1516666271.031 [MissionManager](INFO): RedefineArg DriftOrDonutAtChlPeak:Science.NumProfilesSlidingwindow = reader:DriftOrDonutAtChlPeak.NumberOfProfilesSlidingwindow 2018-01-23T00:11:11.033Z,1516666271.033 [MissionManager](INFO): RedefineArg DriftOrDonutAtChlPeak:Science.PeakChlShallowBound = reader:DriftOrDonutAtChlPeak.ShallowBoundChl 2018-01-23T00:11:11.039Z,1516666271.039 [MissionManager](INFO): RedefineArg DriftOrDonutAtChlPeak:Science.PeakChlDeepBound = reader:DriftOrDonutAtChlPeak.DeepBoundChl 2018-01-23T00:11:11.040Z,1516666271.040 [DriftOrDonutAtChlPeak:J.AltitudeEnvelope](DEBUG): Construct AltitudeEnvelope. 2018-01-23T00:11:11.138Z,1516666271.138 [MissionManager](INFO): Inserting Stack: Missions/Insert/NeedComms.xml 2018-01-23T00:11:11.253Z,1516666271.253 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak:MissionStart:NeedComms.DiveInterval = 3.000000 h 2018-01-23T00:11:11.282Z,1516666271.282 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak:MissionStart:NeedComms.WaitForPitchUp = 10.000000 min 2018-01-23T00:11:11.294Z,1516666271.294 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak:MissionStart:NeedComms.SurfacePitch = 20.000000 arcdeg 2018-01-23T00:11:11.307Z,1516666271.307 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak:MissionStart:NeedComms.SurfaceDepthRate = nan m/s 2018-01-23T00:11:11.319Z,1516666271.319 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak:MissionStart:NeedComms.SurfaceSpeed = 1.000000 m/s 2018-01-23T00:11:11.332Z,1516666271.332 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak:MissionStart:NeedComms.GPSTimeout = 7.000000 min 2018-01-23T00:11:11.356Z,1516666271.356 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak:MissionStart:NeedComms.CommsTimeout = 30.000000 min 2018-01-23T00:11:11.372Z,1516666271.372 [DriftOrDonutAtChlPeak:MissionStart:NeedComms:B.GoToSurface](DEBUG): Construct GoToSurface. 2018-01-23T00:11:11.423Z,1516666271.423 [MissionManager](INFO): Inserting Stack: Missions/Insert/NeedComms.xml 2018-01-23T00:11:11.558Z,1516666271.558 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak:FindHighChlLocation:NeedComms.DiveInterval = 3.000000 h 2018-01-23T00:11:11.561Z,1516666271.561 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak:FindHighChlLocation:NeedComms.WaitForPitchUp = 10.000000 min 2018-01-23T00:11:11.585Z,1516666271.585 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak:FindHighChlLocation:NeedComms.SurfacePitch = 20.000000 arcdeg 2018-01-23T00:11:11.588Z,1516666271.588 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak:FindHighChlLocation:NeedComms.SurfaceDepthRate = nan m/s 2018-01-23T00:11:11.611Z,1516666271.611 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak:FindHighChlLocation:NeedComms.SurfaceSpeed = 1.000000 m/s 2018-01-23T00:11:11.615Z,1516666271.615 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak:FindHighChlLocation:NeedComms.GPSTimeout = 7.000000 min 2018-01-23T00:11:11.618Z,1516666271.618 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak:FindHighChlLocation:NeedComms.CommsTimeout = 30.000000 min 2018-01-23T00:11:11.640Z,1516666271.640 [DriftOrDonutAtChlPeak:FindHighChlLocation:NeedComms:B.GoToSurface](DEBUG): Construct GoToSurface. 2018-01-23T00:11:11.725Z,1516666271.725 [DriftOrDonutAtChlPeak:FindHighChlLocation:C.SetSpeed](DEBUG): Construct. 2018-01-23T00:11:11.740Z,1516666271.740 [DriftOrDonutAtChlPeak:FindHighChlLocation:F.DepthEnvelope](DEBUG): Construct DepthEnvelope. 2018-01-23T00:11:11.775Z,1516666271.775 [DriftOrDonutAtChlPeak:FindHighChlLocation:G.YoYo](DEBUG): Construct YoYo. 2018-01-23T00:11:11.803Z,1516666271.803 [DriftOrDonutAtChlPeak:FindHighChlLocation:H.Buoyancy](DEBUG): Construct Buoyancy. 2018-01-23T00:11:11.836Z,1516666271.836 [DriftOrDonutAtChlPeak:FindHighChlLocation:Lap:Wpt1:A.Waypoint](DEBUG): Construct Waypoint. 2018-01-23T00:11:11.855Z,1516666271.855 [DriftOrDonutAtChlPeak:FindHighChlLocation:Lap:Wpt2:A.Waypoint](DEBUG): Construct Waypoint. 2018-01-23T00:11:11.868Z,1516666271.868 [DriftOrDonutAtChlPeak:FindHighChlLocation:Lap:Wpt3:A.Waypoint](DEBUG): Construct Waypoint. 2018-01-23T00:11:11.907Z,1516666271.907 [DriftOrDonutAtChlPeak:FindHighChlLocation:Lap:Wpt4:A.Waypoint](DEBUG): Construct Waypoint. 2018-01-23T00:11:12.011Z,1516666272.011 [DriftOrDonutAtChlPeak:FindHighChlLocation:CylinderYoYoAroundSamplingLocation:CylinderIfNonNaNLatLon:CylinderWrapper:B.Circle](DEBUG): Construct. 2018-01-23T00:11:12.040Z,1516666272.040 [DriftOrDonutAtChlPeak:FindHighChlLocation:GoToCylinderCenter:ToCylinderCenter.Waypoint](DEBUG): Construct Waypoint. 2018-01-23T00:11:12.135Z,1516666272.135 [DriftOrDonutAtChlPeak:ChlPeakHolding:GoDownInSpiralMode:A.Pitch](DEBUG): Construct. 2018-01-23T00:11:12.164Z,1516666272.164 [DriftOrDonutAtChlPeak:ChlPeakHolding:GoDownInSpiralMode:B.SetSpeed](DEBUG): Construct. 2018-01-23T00:11:12.171Z,1516666272.171 [DriftOrDonutAtChlPeak:ChlPeakHolding:GoDownInSpiralMode:C.Point](DEBUG): Construct. 2018-01-23T00:11:12.185Z,1516666272.185 [DriftOrDonutAtChlPeak:ChlPeakHolding:GoDownInSpiralMode:D.Buoyancy](DEBUG): Construct Buoyancy. 2018-01-23T00:11:12.208Z,1516666272.208 [DriftOrDonutAtChlPeak:ChlPeakHolding:GoDownInDriftMode:A.Pitch](DEBUG): Construct. 2018-01-23T00:11:12.236Z,1516666272.236 [DriftOrDonutAtChlPeak:ChlPeakHolding:GoDownInDriftMode:B.SetSpeed](DEBUG): Construct. 2018-01-23T00:11:12.247Z,1516666272.247 [DriftOrDonutAtChlPeak:ChlPeakHolding:GoDownInDriftMode:C.Point](DEBUG): Construct. 2018-01-23T00:11:12.277Z,1516666272.277 [DriftOrDonutAtChlPeak:ChlPeakHolding:GoUpInSpiralMode:A.Pitch](DEBUG): Construct. 2018-01-23T00:11:12.310Z,1516666272.310 [DriftOrDonutAtChlPeak:ChlPeakHolding:GoUpInSpiralMode:B.SetSpeed](DEBUG): Construct. 2018-01-23T00:11:12.321Z,1516666272.321 [DriftOrDonutAtChlPeak:ChlPeakHolding:GoUpInSpiralMode:C.Point](DEBUG): Construct. 2018-01-23T00:11:12.341Z,1516666272.341 [DriftOrDonutAtChlPeak:ChlPeakHolding:GoUpInSpiralMode:D.Buoyancy](DEBUG): Construct Buoyancy. 2018-01-23T00:11:12.346Z,1516666272.346 [DriftOrDonutAtChlPeak:ChlPeakHolding:GoUpInDriftMode:A.Pitch](DEBUG): Construct. 2018-01-23T00:11:12.375Z,1516666272.375 [DriftOrDonutAtChlPeak:ChlPeakHolding:GoUpInDriftMode:B.SetSpeed](DEBUG): Construct. 2018-01-23T00:11:12.399Z,1516666272.399 [DriftOrDonutAtChlPeak:ChlPeakHolding:GoUpInDriftMode:C.Point](DEBUG): Construct. 2018-01-23T00:11:12.427Z,1516666272.427 [DriftOrDonutAtChlPeak:ChlPeakHolding:HoldDepthInDonutMode:A.Pitch](DEBUG): Construct. 2018-01-23T00:11:12.433Z,1516666272.433 [DriftOrDonutAtChlPeak:ChlPeakHolding:HoldDepthInDonutMode:B.SetSpeed](DEBUG): Construct. 2018-01-23T00:11:12.456Z,1516666272.456 [DriftOrDonutAtChlPeak:ChlPeakHolding:HoldDepthInDonutMode:C.Point](DEBUG): Construct. 2018-01-23T00:11:12.501Z,1516666272.501 [DriftOrDonutAtChlPeak:ChlPeakHolding:HoldDepthInDonutMode:D.Buoyancy](DEBUG): Construct Buoyancy. 2018-01-23T00:11:12.522Z,1516666272.522 [DriftOrDonutAtChlPeak:ChlPeakHolding:HoldDepthInDriftMode:A.Pitch](DEBUG): Construct. 2018-01-23T00:11:12.559Z,1516666272.559 [DriftOrDonutAtChlPeak:ChlPeakHolding:HoldDepthInDriftMode:B.SetSpeed](DEBUG): Construct. 2018-01-23T00:11:12.563Z,1516666272.563 [DriftOrDonutAtChlPeak:ChlPeakHolding:HoldDepthInDriftMode:C.Point](DEBUG): Construct. 2018-01-23T00:11:12.963Z,1516666272.963 [DriftOrDonutAtChlPeak:TakeSamples:NoFiringForTooLong:C.Execute](DEBUG): Construct Execute. 2018-01-23T00:11:13.939Z,1516666273.939 [MissionManager](INFO): Inserting Stack: Missions/Insert/NeedComms.xml 2018-01-23T00:11:14.055Z,1516666274.055 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak:TakeSamples:ReportAtSurface:NeedComms.DiveInterval = 3.000000 h 2018-01-23T00:11:14.099Z,1516666274.099 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak:TakeSamples:ReportAtSurface:NeedComms.WaitForPitchUp = 10.000000 min 2018-01-23T00:11:14.103Z,1516666274.103 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak:TakeSamples:ReportAtSurface:NeedComms.SurfacePitch = 20.000000 arcdeg 2018-01-23T00:11:14.147Z,1516666274.147 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak:TakeSamples:ReportAtSurface:NeedComms.SurfaceDepthRate = nan m/s 2018-01-23T00:11:14.150Z,1516666274.150 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak:TakeSamples:ReportAtSurface:NeedComms.SurfaceSpeed = 1.000000 m/s 2018-01-23T00:11:14.153Z,1516666274.153 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak:TakeSamples:ReportAtSurface:NeedComms.GPSTimeout = 7.000000 min 2018-01-23T00:11:14.173Z,1516666274.173 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak:TakeSamples:ReportAtSurface:NeedComms.CommsTimeout = 30.000000 min 2018-01-23T00:11:14.218Z,1516666274.218 [DriftOrDonutAtChlPeak:TakeSamples:ReportAtSurface:NeedComms:B.GoToSurface](DEBUG): Construct GoToSurface. 2018-01-23T00:11:14.315Z,1516666274.315 [DriftOrDonutAtChlPeak:MissionCompleted:B.Execute](DEBUG): Construct Execute. 2018-01-23T00:11:14.830Z,1516666274.830 [MissionManager](DEBUG): Total number of ESP cartridges (Maximum 60. Set to a smaller number if not using all of them. Set to 0 to disable ESP sampling). 9 Maximum duration of mission 20 On search-for-chlmax yo-yo transects, how often to surface for commumications 60 If the vehicle does not receive an acoustic signal for more than this length of time, it will surface for communications. Set longer than MissionTimeout to effectively disable. 21 If no firing after more than MaxWaitNoFiring, terminate mission. 4 Maximum duration of cylinder yoyo. 60 Wait duration for the depth undulation to damp down. Initialized to 10 minutes. 10.0 Whether to search for the location of high chl. Initialized to false. Whether to yoyo on cylinder centered at the hi-chl location. Initialized to True. Vehicle speed when searching for the location of high chl. 1.0 Vehicle speed on vertical maneuver, and holding at chl-peak and sampling. 0 for drift mode (prop off); 1.0 for spiral/donut mode (prop on) 1.0 Vehicle spiraling speed. 1.0 Maximum depth for the entire mission. 50 Shallow depth bound for chl-peak detection. 4.5 Deep depth bound for chl-peak detection. 27 Minimum depth while performing the YoYo behavior on cylinder centered at the hi-chl location. 4.5 Maximum depth while performing the YoYo behavior on cylinder centered at the hi-chl location. 27 Radius of cylinder centered at the hi-chl location. 200 Maximum number of circles on cylinder. 1 Number of times the vehicle should try to cycle through waypoints.. 1 Latitude of waypoint 1. If nan, waypoint is skipped. If FindHighChlLocation is True, the search-for-hichl distance needs to be at least 4 yoyo profiles. NaN Longitude of waypoint 1. If nan, waypoint is skipped. If FindHighChlLocation is True, the search-for-hichl distance needs to be at least 4 yoyo profiles. NaN Latitude of waypoint 2. If nan, waypoint is skipped. NaN Longitude of waypoint 2. If nan, waypoint is skipped. NaN Latitude of waypoint 3. If nan, waypoint is skipped. NaN Longitude of waypoint 3. If nan, waypoint is skipped. NaN Latitude of waypoint 4. If nan, waypoint is skipped. NaN Longitude of waypoint 4. If nan, waypoint is skipped. NaN Sample 1. Vertical distance (positive: above; negative: below) the peak-chl depth for taking comparison samples. NaN Sample 2. NaN Sample 3. NaN Sample 4. NaN Sample 5. NaN Sample 6. NaN Sample 7. NaN Sample 8. NaN Sample 9. NaN Sample 10. NaN Sample 11. NaN Sample 12. NaN Sample 13. NaN Sample 14. NaN Sample 15. NaN Sample 16. NaN Sample 17. NaN Sample 18. NaN Sample 19. NaN Sample 20. NaN Sample 1. Pre-designated depth. If NaN, will use vertical distance from chl-peak depth. NaN Sample 2. NaN Sample 3. NaN Sample 4. NaN Sample 5. NaN Sample 6. NaN Sample 7. NaN Sample 8. NaN Sample 9. NaN Sample 10. NaN Sample 11. NaN Sample 12. NaN Sample 13. NaN Sample 14. NaN Sample 15. NaN Sample 16. NaN Sample 17. NaN Sample 18. NaN Sample 19. NaN Sample 20. NaN Sample 1. Before sampling, maneuver vertically to reacquire chl peak (initialized to false). Sample 2. Sample 3. Sample 4. Sample 5. Sample 6. Sample 7. Sample 8. Sample 9. Sample 10. Sample 11. Sample 12. Sample 13. Sample 14. Sample 15. Sample 16. Sample 17. Sample 18. Sample 19. Sample 20. Sample 1. When sampling is completed, go to surface to report (initialized to false). Sample 2. Sample 3. Sample 4. Sample 5. Sample 6. Sample 7. Sample 8. Sample 9. Sample 10. Sample 11. Sample 12. Sample 13. Sample 14. Sample 15. Sample 16. Sample 17. Sample 18. Sample 19. Sample 20. Go-up depth rate (Negative depth rate means going up). -0.04 Go-down depth rate (Positive depth rate means going down). 0.2 Minimum altitude while performing the YoYo behavior (for bottom-terminated YoYos). 9 Minimum altitude for the entire mission. 7 Minimum offshore distance for the entire mission. 2 Shallow bound for vertical chl-peak finding maneuver = ShallowBoundChl - VertMargin. Deep bound for vertical chl-peak finding maneuver = DeepBoundChl + VertMargin. 3 Vertical perturbation (going up or down) for reacquiring the peak. 6.0 Depth error allowed for being considered at/near the target depth. 0.1 Peak chl on a profile is registered at the beginning of the next yoyo profile. In this mission, the peak chl on the descending profile is saved when the vehicle has turned onto the next yoyo profile (ascending profile) and is at least "RiseFromDeepTurningPoint" away from the turning depth. 1.5 If this distance away from the circle, drive straight towards (or away from the center). Otherwise, try to reduce distance from the ideal circle. 100 If true, vehicle turns to the left around the center point. If false, vehicle turns to the right. Used to relax waypoint cross-track error constant that is adjusted for docking. (You can override this setting by passing an argument.) 0.010 Vehicle up pitch while performing the YoYo behavior. 20 Vehicle down pitch while performing the YoYo behavior. -20 Rudder angle to use while performing the donut cast. 13 Length of horizontal sliding window. Picks the highest yoyo-wise chl peak (after low-pass filtering by a filter of length FilterWidthHorizontal) within this window. Ignore older highs because ocean is changing. 100 Low-pass window length (based on depth sensor sampling interval 0.4 second) for low-pass filtering. 40 Buoyancy bladder position while performing the YoYo behavior. Defaults to buoyancyNeutral setting in the Config/Control.cfg file. Set to NaN cc for active buoyancy Static setting for mass during the mission. Set to NaN mm for active mass position Minimum depth while performing the YoYo behavior. Program will set to ShallowBoundChl, and then CylinderYoYoMinDep. Initialized to 4.5 m. 4.5 Maximum depth while performing the YoYo behavior. Program will set to DeepBoundChl, and then CylinderYoYoMaxDep. Initialized 27 m. 27 Depth for sampling. Initialized to 10 m. 10.0 Depth if pre-designated. Initialized to NaN. NaN Vertical distance (positive: above; negative: below) the peak-chl depth for taking comparison samples. Initialized to NaN. NaN When sampling is completed, go to surface to report. Initialized to false. Have completed surface reporting. Initialized to False. For next sample. When sampling is completed, go to surface to report. Initialized to false. Before sampling, maneuver vertically to reacquire chl peak. Initialized to false. Sample options (VertDistance, ReportAtSurface, ReacquirePeak) already set. Initialized to false. Sampling completed. Initialized to false. Mission stopped because of no firing for too long. Initialized to false. 0.0 0.0 Start vertical chl peak fiding and sampling (initialized to false). Surfacing for communications (set to true when going down. Initialized to false). Flag of target depth having been set. Initialized to false. Go-up flag (set to true when going up. Initialized to false). Go-down flag (set to true when going down. Initialized to false). Flag of diving from surface (Initialized to true). Flag of peak-chl depth having been set (set to true when the chl-peak depth has been set. Initialized to false). Enables setting peak-chl depth. Initialized to true. Flag of first dive to find the peak-chl depth (true only for the first dive; false afterwards). Flag of water sampling in process (initialized to false). Flag of sample fired (initialized to false). Peak-chl depth detected on a dive, and set for chl-peak holding. Initialized to 10 meters. 10.0 Peak-chl value detected on a dive, and set for chl-peak holding. 0.0 Depth held for triggering sampling. Initialized to 10 meters. 10.0 Flag of logging "GoUp" in syslog (initialized to false). Flag of logging "GoDown" in syslog (initialized to false). Flag of logging "HoldDepth" in syslog (initialized to false). Elapsed time from last time-fix to StartVerticalManeuver. NaN Elapsed time from last time-fix to now. NaN Elapsed time from last time-fix to last firing. NaN Latitude of cylinder center. NaN Longitude of cylinder center. NaN Count of water samples (initilized to 1). 1 Another altitude envelope for the YoYo behavior. This envelope should fall within the limits of the standard safety envelopes in Insert/StandardEnvelopes.xml in order to avoid commanding high pitch angles for bottom-terminated YoYos. Set FlagGoUp to true to reacquire chl peak. DepthLogged, ChlLogged, PeakChlDepthSet, PeakChlSet = , , , . Set cylinder center to Waypoint1 ,. Set cylinder center to hi-chl location ,,. Yoyo profile on a cylinder around sampling location ,, at radius = Go to cylinder center (i.e., sampling location): , 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 Hold depth. DepthLogged, ChlLogged, PeakChlDepthSet, PeakChlSet = , , , . Go down from Go up from Set PeakChlDepthSet. DepthLogged, ChlLogged, PeakChlDepthSet, PeakChlSet = , , , 1 2 No firing for too long. Stopping mission. FromLastTimeFixToNow, FromLastTimeFixToLastFiring = , stop 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 Taking ESP sample No. at target depth . ESP sample No. completed. Surfacing to report ESP results to shore. 1 1 Completed sampling. Stopping mission. stop 1 2018-01-23T00:11:14.858Z,1516666274.858 [CommandLine](IMPORTANT): Loaded ./Missions/Science/chlpeak_sampling_InAboveBelow.xml 2018-01-23T00:11:17.898Z,1516666277.898 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:11:18.035Z,1516666278.035 [DataOverHttps](INFO): Received command:sched asap "load Science/chlpeak_sampling_InAboveBelow.xml;set DriftOrDonutAtChlPeak.NumESPSamplers 1 count;set DriftOrDonutAtChlPeak.NeedCommsTimeInTransect 120 minute;set DriftOrDonutAtChlPeak.AcousticTrackingTimeout 5 minute" 2s0es 1 3 2018-01-23T00:11:24.811Z,1516666284.811 [CommandLine](IMPORTANT): got command set DriftOrDonutAtChlPeak.NumESPSamplers 1.000000 count 2018-01-23T00:11:24.812Z,1516666284.812 [CommandLine](IMPORTANT): got command set DriftOrDonutAtChlPeak.NeedCommsTimeInTransect 120.000000 minute 2018-01-23T00:11:24.813Z,1516666284.813 [CommandLine](IMPORTANT): got command set DriftOrDonutAtChlPeak.AcousticTrackingTimeout 5.000000 minute 2018-01-23T00:11:24.823Z,1516666284.823 [CommandLine](IMPORTANT): got command schedule asap "load Science/chlpeak_sampling_InAboveBelow.xml;set DriftOrDonutAtChlPeak.NumESPSamplers 1 count;set DriftOrDonutAtChlPeak.NeedCommsTimeInTransect 120 minute;set DriftOrDonutAtChlPeak.AcousticTrackingTimeout 5 minute" 2s0es 1 3.000000 2018-01-23T00:11:24.828Z,1516666284.828 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session. 2018-01-23T00:11:24.830Z,1516666284.830 [CommandLine](IMPORTANT): Scheduling command #1 of 3 with id=2s0es 2018-01-23T00:11:24.831Z,1516666284.831 [CommandLine](IMPORTANT): Scheduled #3 (#1 of 3 with id='2s0es'): "load Science/chlpeak_sampling_InAboveBelow.xml;set DriftOrDonutAtChlPeak.NumESPSamplers 1 count;set DriftOrDonutAtChlPeak.NeedCommsTimeInTransect 120 minute;set DriftOrDonutAtChlPeak.AcousticTrackingTimeout 5 minute" ASAP 2018-01-23T00:11:24.858Z,1516666284.858 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:11:25.047Z,1516666285.047 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:11:25.381Z,1516666285.381 [DataOverHttps](IMPORTANT): SBD MTMSN=20180123T000943 2018-01-23T00:11:25.427Z,1516666285.427 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:11:25.795Z,1516666285.795 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:11:26.216Z,1516666286.216 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:11:32.298Z,1516666292.298 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:11:32.439Z,1516666292.439 [DataOverHttps](INFO): Received command:sched asap "set DriftOrDonutAtChlPeak.SpeedFindHighChlLatLon 0 meter_per_second;set DriftOrDonutAtChlPeak.SpeedChlPeakHoldingSampling 0 meter_per_second;set DriftOrDonutAtChlPeak.SpeedSpiral 0 meter_per_second" 2s0es 2 3 2018-01-23T00:11:35.687Z,1516666295.687 [CommandLine](IMPORTANT): got command set DriftOrDonutAtChlPeak.SpeedFindHighChlLatLon 0.000000 meter_per_second 2018-01-23T00:11:35.687Z,1516666295.687 [CommandLine](IMPORTANT): got command set DriftOrDonutAtChlPeak.SpeedChlPeakHoldingSampling 0.000000 meter_per_second 2018-01-23T00:11:35.688Z,1516666295.688 [CommandLine](IMPORTANT): got command set DriftOrDonutAtChlPeak.SpeedSpiral 0.000000 meter_per_second 2018-01-23T00:11:35.689Z,1516666295.689 [CommandLine](IMPORTANT): got command run 2018-01-23T00:11:35.858Z,1516666295.858 [CommandLine](IMPORTANT): Running 2018-01-23T00:11:35.896Z,1516666295.896 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:11:35.960Z,1516666295.960 [Default] Stopped 2018-01-23T00:11:35.960Z,1516666295.960 [Default](DEBUG): Aggregate::uninitialize Default 2018-01-23T00:11:35.960Z,1516666295.960 [Default:B.GoToSurface] Stopped 2018-01-23T00:11:35.960Z,1516666295.960 [Default:B.GoToSurface](DEBUG): Uninitialize GoToSurfaceComponent. 2018-01-23T00:11:35.960Z,1516666295.960 [Default:CheckIn] Stopped 2018-01-23T00:11:35.960Z,1516666295.960 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-01-23T00:11:35.961Z,1516666295.961 [Default:CheckIn:Read_GPS] Stopped 2018-01-23T00:11:35.961Z,1516666295.961 [MissionManager](IMPORTANT): Started mission DriftOrDonutAtChlPeak 2018-01-23T00:11:35.961Z,1516666295.961 [DriftOrDonutAtChlPeak] Running Loop=1 2018-01-23T00:11:35.961Z,1516666295.961 [DriftOrDonutAtChlPeak](DEBUG): Aggregate::initialize DriftOrDonutAtChlPeak 2018-01-23T00:11:35.961Z,1516666295.961 [DriftOrDonutAtChlPeak:StandardEnvelopes] Running Loop=1 2018-01-23T00:11:35.961Z,1516666295.961 [DriftOrDonutAtChlPeak:StandardEnvelopes](DEBUG): Aggregate::initialize DriftOrDonutAtChlPeak:StandardEnvelopes 2018-01-23T00:11:35.961Z,1516666295.961 [DriftOrDonutAtChlPeak:StandardEnvelopes:A.AltitudeEnvelope] Running Loop=1 2018-01-23T00:11:35.961Z,1516666295.961 [DriftOrDonutAtChlPeak:StandardEnvelopes:A.AltitudeEnvelope](DEBUG): Initialize AltitudeEnvelopeComponent. 2018-01-23T00:11:35.962Z,1516666295.962 [DriftOrDonutAtChlPeak:StandardEnvelopes:B.DepthEnvelope] Running Loop=1 2018-01-23T00:11:35.962Z,1516666295.962 [DriftOrDonutAtChlPeak:StandardEnvelopes:B.DepthEnvelope](DEBUG): Initialize DepthEnvelopeComponent. 2018-01-23T00:11:35.962Z,1516666295.962 [DriftOrDonutAtChlPeak:StandardEnvelopes:C.OffshoreEnvelope] Running Loop=1 2018-01-23T00:11:35.962Z,1516666295.962 [DriftOrDonutAtChlPeak:StandardEnvelopes:C.OffshoreEnvelope](DEBUG): Initialize OffshoreEnvelopeComponent. 2018-01-23T00:11:35.962Z,1516666295.962 [DriftOrDonutAtChlPeak:AbortDrift] Running Loop=1 2018-01-23T00:11:35.968Z,1516666295.968 [CommandLine](IMPORTANT): got command schedule asap "set DriftOrDonutAtChlPeak.SpeedFindHighChlLatLon 0 meter_per_second;set DriftOrDonutAtChlPeak.SpeedChlPeakHoldingSampling 0 meter_per_second;set DriftOrDonutAtChlPeak.SpeedSpiral 0 meter_per_second" 2s0es 2 3.000000 2018-01-23T00:11:35.968Z,1516666295.968 [CommandLine](IMPORTANT): Scheduling command #2 of 3 with id=2s0es 2018-01-23T00:11:35.969Z,1516666295.969 [CommandLine](IMPORTANT): Scheduled #4 (#2 of 3 with id='2s0es'): "set DriftOrDonutAtChlPeak.SpeedFindHighChlLatLon 0 meter_per_second;set DriftOrDonutAtChlPeak.SpeedChlPeakHoldingSampling 0 meter_per_second;set DriftOrDonutAtChlPeak.SpeedSpiral 0 meter_per_second" ASAP 2018-01-23T00:11:35.962Z,1516666295.962 [DriftOrDonutAtChlPeak:AbortDrift](DEBUG): Aggregate::initialize DriftOrDonutAtChlPeak:AbortDrift 2018-01-23T00:11:35.971Z,1516666295.971 [DriftOrDonutAtChlPeak:AbortDrift:A] Running Loop=1 2018-01-23T00:11:35.971Z,1516666295.971 [DriftOrDonutAtChlPeak:H.Pitch] Running Loop=1 2018-01-23T00:11:35.971Z,1516666295.971 [DriftOrDonutAtChlPeak:H.Pitch](DEBUG): Initialize. 2018-01-23T00:11:35.971Z,1516666295.971 [DriftOrDonutAtChlPeak:Science] Running Loop=1 2018-01-23T00:11:35.971Z,1516666295.971 [DriftOrDonutAtChlPeak:Science](DEBUG): Aggregate::initialize DriftOrDonutAtChlPeak:Science 2018-01-23T00:11:35.971Z,1516666295.971 [DriftOrDonutAtChlPeak:Science:A] Running Loop=1 2018-01-23T00:11:35.971Z,1516666295.971 [DriftOrDonutAtChlPeak:Science:B] Running Loop=1 2018-01-23T00:11:35.971Z,1516666295.971 [DriftOrDonutAtChlPeak:Science:C] Running Loop=1 2018-01-23T00:11:35.972Z,1516666295.972 [DriftOrDonutAtChlPeak:Science:D] Running Loop=1 2018-01-23T00:11:35.972Z,1516666295.972 [DriftOrDonutAtChlPeak:Science:E] Running Loop=1 2018-01-23T00:11:35.972Z,1516666295.972 [DriftOrDonutAtChlPeak:Science:F] Running Loop=1 2018-01-23T00:11:35.972Z,1516666295.972 [DriftOrDonutAtChlPeak:Science:G] Running Loop=1 2018-01-23T00:11:35.972Z,1516666295.972 [DriftOrDonutAtChlPeak:Science:H] Running Loop=1 2018-01-23T00:11:35.972Z,1516666295.972 [DriftOrDonutAtChlPeak:Science:PeakDetectChl] Running Loop=1 2018-01-23T00:11:35.972Z,1516666295.972 [DriftOrDonutAtChlPeak:Science:PeakDetectChl](DEBUG): Aggregate::initialize DriftOrDonutAtChlPeak:Science:PeakDetectChl 2018-01-23T00:11:35.972Z,1516666295.972 [DriftOrDonutAtChlPeak:Science:PeakDetectChl:A.PeakDetectVsDepth] Running Loop=1 2018-01-23T00:11:35.972Z,1516666295.972 [DriftOrDonutAtChlPeak:Science:PeakDetectChl:A.PeakDetectVsDepth](DEBUG): Initialize. 2018-01-23T00:11:35.974Z,1516666295.974 [DriftOrDonutAtChlPeak:Science:HighestChlPeakReport] Running Loop=1 2018-01-23T00:11:35.983Z,1516666295.983 [DriftOrDonutAtChlPeak:Science:HighestChlPeakReport](DEBUG): Aggregate::initialize DriftOrDonutAtChlPeak:Science:HighestChlPeakReport 2018-01-23T00:11:35.983Z,1516666295.983 [DriftOrDonutAtChlPeak:Science:HighestChlPeakReport:A.PeakDetectHorizontal] Running Loop=1 2018-01-23T00:11:35.983Z,1516666295.983 [DriftOrDonutAtChlPeak:Science:HighestChlPeakReport:A.PeakDetectHorizontal](INFO): Initialize. 2018-01-23T00:11:35.984Z,1516666295.984 [DriftOrDonutAtChlPeak:Science:PeakDetectNO3] Running Loop=1 2018-01-23T00:11:35.984Z,1516666295.984 [DriftOrDonutAtChlPeak:Science:PeakDetectNO3](DEBUG): Aggregate::initialize DriftOrDonutAtChlPeak:Science:PeakDetectNO3 2018-01-23T00:11:35.984Z,1516666295.984 [DriftOrDonutAtChlPeak:Science:PeakDetectNO3:A.PeakDetectVsDepth] Running Loop=1 2018-01-23T00:11:35.984Z,1516666295.984 [DriftOrDonutAtChlPeak:Science:PeakDetectNO3:A.PeakDetectVsDepth](DEBUG): Initialize. 2018-01-23T00:11:35.986Z,1516666295.986 [DriftOrDonutAtChlPeak:Science:PeakDetectOil] Running Loop=1 2018-01-23T00:11:35.986Z,1516666295.986 [DriftOrDonutAtChlPeak:Science:PeakDetectOil](DEBUG): Aggregate::initialize DriftOrDonutAtChlPeak:Science:PeakDetectOil 2018-01-23T00:11:35.986Z,1516666295.986 [DriftOrDonutAtChlPeak:Science:PeakDetectOil:A.PeakDetectVsDepth] Running Loop=1 2018-01-23T00:11:35.986Z,1516666295.986 [DriftOrDonutAtChlPeak:Science:PeakDetectOil:A.PeakDetectVsDepth](DEBUG): Initialize. 2018-01-23T00:11:35.993Z,1516666295.993 [DriftOrDonutAtChlPeak:J.AltitudeEnvelope] Running Loop=1 2018-01-23T00:11:35.993Z,1516666295.993 [DriftOrDonutAtChlPeak:J.AltitudeEnvelope](DEBUG): Initialize AltitudeEnvelopeComponent. 2018-01-23T00:11:35.993Z,1516666295.993 [DriftOrDonutAtChlPeak:TakeSamples] Running Loop=1 2018-01-23T00:11:35.993Z,1516666295.993 [DriftOrDonutAtChlPeak:TakeSamples](DEBUG): Aggregate::initialize DriftOrDonutAtChlPeak:TakeSamples 2018-01-23T00:11:35.993Z,1516666295.993 [DriftOrDonutAtChlPeak:B] Running Loop=1 2018-01-23T00:11:35.994Z,1516666295.994 [DriftOrDonutAtChlPeak:TakeSamples] Running Loop=1 2018-01-23T00:11:36.010Z,1516666296.010 [DriftOrDonutAtChlPeak:TakeSamples:SetOptionsOfSample1] Running Loop=1 2018-01-23T00:11:36.019Z,1516666296.019 [DriftOrDonutAtChlPeak:TakeSamples:SetOptionsOfSample1](DEBUG): Aggregate::initialize DriftOrDonutAtChlPeak:TakeSamples:SetOptionsOfSample1 2018-01-23T00:11:36.019Z,1516666296.019 [DriftOrDonutAtChlPeak:TakeSamples:SetOptionsOfSample1:A] Running Loop=1 2018-01-23T00:11:36.028Z,1516666296.028 [DriftOrDonutAtChlPeak:TakeSamples:SetOptionsOfSample1:A] Stopped 2018-01-23T00:11:36.029Z,1516666296.029 [DriftOrDonutAtChlPeak:TakeSamples:SetOptionsOfSample1:B] Running Loop=1 2018-01-23T00:11:36.029Z,1516666296.029 [DriftOrDonutAtChlPeak:J.AltitudeEnvelope] Running Loop=1 2018-01-23T00:11:36.034Z,1516666296.034 [DriftOrDonutAtChlPeak:Science] Running Loop=1 2018-01-23T00:11:36.069Z,1516666296.069 [DriftOrDonutAtChlPeak:Science:PeakDetectOil] Stopped 2018-01-23T00:11:36.070Z,1516666296.070 [DriftOrDonutAtChlPeak:Science:PeakDetectOil](DEBUG): Aggregate::uninitialize DriftOrDonutAtChlPeak:Science:PeakDetectOil 2018-01-23T00:11:36.070Z,1516666296.070 [DriftOrDonutAtChlPeak:Science:PeakDetectOil:A.PeakDetectVsDepth] Stopped 2018-01-23T00:11:36.070Z,1516666296.070 [DriftOrDonutAtChlPeak:Science:PeakDetectOil:A.PeakDetectVsDepth](DEBUG): Uninitialize. 2018-01-23T00:11:36.070Z,1516666296.070 [DriftOrDonutAtChlPeak:Science:PeakDetectNO3] Stopped 2018-01-23T00:11:36.070Z,1516666296.070 [DriftOrDonutAtChlPeak:Science:PeakDetectNO3](DEBUG): Aggregate::uninitialize DriftOrDonutAtChlPeak:Science:PeakDetectNO3 2018-01-23T00:11:36.070Z,1516666296.070 [DriftOrDonutAtChlPeak:Science:PeakDetectNO3:A.PeakDetectVsDepth] Stopped 2018-01-23T00:11:36.070Z,1516666296.070 [DriftOrDonutAtChlPeak:Science:PeakDetectNO3:A.PeakDetectVsDepth](DEBUG): Uninitialize. 2018-01-23T00:11:36.070Z,1516666296.070 [DriftOrDonutAtChlPeak:Science:HighestChlPeakReport] Running Loop=1 2018-01-23T00:11:36.084Z,1516666296.084 [DriftOrDonutAtChlPeak:Science:PeakDetectChl] Running Loop=1 2018-01-23T00:11:36.090Z,1516666296.090 [DriftOrDonutAtChlPeak:Science:H] Running Loop=1 2018-01-23T00:11:36.091Z,1516666296.091 [DriftOrDonutAtChlPeak:Science:H](DEBUG): Initialize ReadDataComponent to sense mass_concentration_of_petroleum_hydrocarbons_in_sea_water 2018-01-23T00:11:36.093Z,1516666296.093 [DriftOrDonutAtChlPeak:Science:G] Running Loop=1 2018-01-23T00:11:36.094Z,1516666296.094 [DriftOrDonutAtChlPeak:Science:G](DEBUG): Initialize ReadDataComponent to sense mass_concentration_of_chlorophyll_in_sea_water 2018-01-23T00:11:36.104Z,1516666296.104 [DriftOrDonutAtChlPeak:Science:F] Stopped 2018-01-23T00:11:36.104Z,1516666296.104 [DriftOrDonutAtChlPeak:Science:E] Stopped 2018-01-23T00:11:36.104Z,1516666296.104 [DriftOrDonutAtChlPeak:Science:D] Running Loop=1 2018-01-23T00:11:36.105Z,1516666296.105 [DriftOrDonutAtChlPeak:Science:D](DEBUG): Initialize ReadDataComponent to sense CTD_Seabird.sea_water_temperature 2018-01-23T00:11:36.106Z,1516666296.106 [DriftOrDonutAtChlPeak:Science:D](DEBUG): Initialize ReadDataComponent to sense CTD_Seabird.sea_water_salinity 2018-01-23T00:11:36.108Z,1516666296.108 [DriftOrDonutAtChlPeak:Science:C] Running Loop=1 2018-01-23T00:11:36.109Z,1516666296.109 [DriftOrDonutAtChlPeak:Science:C](DEBUG): Initialize ReadDataComponent to sense sea_water_temperature 2018-01-23T00:11:36.110Z,1516666296.110 [DriftOrDonutAtChlPeak:Science:C](DEBUG): Initialize ReadDataComponent to sense sea_water_salinity 2018-01-23T00:11:36.113Z,1516666296.113 [DriftOrDonutAtChlPeak:Science:B] Stopped 2018-01-23T00:11:36.113Z,1516666296.113 [DriftOrDonutAtChlPeak:Science:A] Running Loop=1 2018-01-23T00:11:36.113Z,1516666296.113 [DriftOrDonutAtChlPeak:Science:A](DEBUG): Initialize ReadDataComponent to sense mass_concentration_of_oxygen_in_sea_water 2018-01-23T00:11:36.124Z,1516666296.124 [DriftOrDonutAtChlPeak:H.Pitch] Running Loop=1 2018-01-23T00:11:36.133Z,1516666296.133 [DriftOrDonutAtChlPeak:AbortDrift] Running Loop=1 2018-01-23T00:11:36.147Z,1516666296.147 [DriftOrDonutAtChlPeak:AbortDrift:A](INFO): Insert acoustic timeout set to 0.083333 h . 2018-01-23T00:11:36.149Z,1516666296.149 [DriftOrDonutAtChlPeak:AbortDrift:A] Stopped 2018-01-23T00:11:36.149Z,1516666296.149 [DriftOrDonutAtChlPeak:AbortDrift:B.AbortDrift] Running Loop=1 2018-01-23T00:11:36.149Z,1516666296.149 [DriftOrDonutAtChlPeak:AbortDrift:B.AbortDrift](INFO): Initializing AbortDrift. 2018-01-23T00:11:36.150Z,1516666296.150 [DriftOrDonutAtChlPeak:AbortDrift:B.AbortDrift](IMPORTANT): Acoustic timeout set to: 0.08 hours. 2018-01-23T00:11:36.156Z,1516666296.156 [DriftOrDonutAtChlPeak:B] Stopped 2018-01-23T00:11:36.156Z,1516666296.156 [DriftOrDonutAtChlPeak:C] Running Loop=1 2018-01-23T00:11:36.156Z,1516666296.156 [DriftOrDonutAtChlPeak:StandardEnvelopes] Running Loop=1 2018-01-23T00:11:36.157Z,1516666296.157 [DriftOrDonutAtChlPeak:StandardEnvelopes:C.OffshoreEnvelope] Running Loop=1 2018-01-23T00:11:36.184Z,1516666296.184 [DriftOrDonutAtChlPeak:StandardEnvelopes:B.DepthEnvelope] Running Loop=1 2018-01-23T00:11:36.198Z,1516666296.198 [DriftOrDonutAtChlPeak:StandardEnvelopes:A.AltitudeEnvelope] Running Loop=1 2018-01-23T00:11:36.312Z,1516666296.312 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:11:36.331Z,1516666296.331 [CTD_Seabird](INFO): Initializing 2018-01-23T00:11:36.332Z,1516666296.332 [CTD_Seabird](INFO): Checking LCM 2018-01-23T00:11:36.344Z,1516666296.344 [CTD_Seabird](INFO): LCM OK 2018-01-23T00:11:36.344Z,1516666296.344 [CTD_Seabird](INFO): Powering up 2018-01-23T00:11:36.363Z,1516666296.363 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = 0.000000, longitudeAccuracy_ = 0.000000, depthAccuracy_ = nan 2018-01-23T00:11:36.363Z,1516666296.363 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 2 2018-01-23T00:11:36.363Z,1516666296.363 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T00:11:36.380Z,1516666296.380 [DriftOrDonutAtChlPeak:TakeSamples:SetOptionsOfSample1:B] Stopped 2018-01-23T00:11:36.380Z,1516666296.380 [DriftOrDonutAtChlPeak:TakeSamples:SetOptionsOfSample1:C] Running Loop=1 2018-01-23T00:11:36.388Z,1516666296.388 [WetLabsBB2FL](INFO): Opening uart, block timeout 10ths=4 2018-01-23T00:11:36.389Z,1516666296.389 [WetLabsBB2FL](INFO): Powering up 2018-01-23T00:11:36.393Z,1516666296.393 [DriftOrDonutAtChlPeak:AbortDrift:B.AbortDrift](INFO): Received valid gps time fix: 1516665856.00. Resetting abort timer. 2018-01-23T00:11:36.393Z,1516666296.393 [DriftOrDonutAtChlPeak:AbortDrift:B.AbortDrift](INFO): Received valid acoustic ping at time: 1516666240.00. Resetting abort timer. 2018-01-23T00:11:36.410Z,1516666296.410 [DriftOrDonutAtChlPeak:C] Stopped 2018-01-23T00:11:36.410Z,1516666296.410 [DriftOrDonutAtChlPeak:D] Running Loop=1 2018-01-23T00:11:36.451Z,1516666296.451 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T00:11:36.673Z,1516666296.673 [DataOverHttps](IMPORTANT): SBD MTMSN=20180123T000958 2018-01-23T00:11:36.712Z,1516666296.712 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:11:36.762Z,1516666296.762 [DriftOrDonutAtChlPeak:TakeSamples:SetOptionsOfSample1:C] Stopped 2018-01-23T00:11:36.763Z,1516666296.763 [DriftOrDonutAtChlPeak:TakeSamples:SetOptionsOfSample1:D] Running Loop=1 2018-01-23T00:11:36.789Z,1516666296.789 [DriftOrDonutAtChlPeak:D] Stopped 2018-01-23T00:11:36.789Z,1516666296.789 [DriftOrDonutAtChlPeak:G] Running Loop=1 2018-01-23T00:11:37.131Z,1516666297.131 [ThrusterServo](FAULT): getVelocity uart error serial timeout 2018-01-23T00:11:37.131Z,1516666297.131 [ThrusterServo](FAULT): Thruster uart error: serial timeout 2018-01-23T00:11:37.131Z,1516666297.131 [ThrusterServo] Communications Fault, FailCount= 1 2018-01-23T00:11:37.131Z,1516666297.131 [ThrusterServo](ERROR): Communications Fault 2018-01-23T00:11:37.135Z,1516666297.135 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T00:11:37.135Z,1516666297.135 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 2 2018-01-23T00:11:37.135Z,1516666297.135 [CBIT](ERROR): Communications Fault in component: ThrusterServo 2018-01-23T00:11:37.201Z,1516666297.201 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:11:37.229Z,1516666297.229 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T00:11:37.230Z,1516666297.230 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T00:11:37.230Z,1516666297.230 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T00:11:37.255Z,1516666297.255 [DriftOrDonutAtChlPeak:TakeSamples:SetOptionsOfSample1:D] Stopped 2018-01-23T00:11:37.255Z,1516666297.255 [DriftOrDonutAtChlPeak:TakeSamples:SetOptionsOfSample1:E] Running Loop=1 2018-01-23T00:11:37.261Z,1516666297.261 [DriftOrDonutAtChlPeak:G] Stopped 2018-01-23T00:11:37.262Z,1516666297.262 [DriftOrDonutAtChlPeak:MissionStart] Running Loop=1 2018-01-23T00:11:37.262Z,1516666297.262 [DriftOrDonutAtChlPeak:MissionStart](DEBUG): Aggregate::initialize DriftOrDonutAtChlPeak:MissionStart 2018-01-23T00:11:37.262Z,1516666297.262 [DriftOrDonutAtChlPeak:MissionStart:MissionStartComms] Running Loop=1 2018-01-23T00:11:37.262Z,1516666297.262 [DriftOrDonutAtChlPeak:MissionStart:MissionStartComms](DEBUG): Aggregate::initialize DriftOrDonutAtChlPeak:MissionStart:MissionStartComms 2018-01-23T00:11:37.363Z,1516666297.363 [ThrusterServo](DEBUG): Uninitialize Thruster Servo. 2018-01-23T00:11:37.363Z,1516666297.363 [ThrusterServo](INFO): Powering down 2018-01-23T00:11:37.581Z,1516666297.581 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:11:37.642Z,1516666297.642 [DriftOrDonutAtChlPeak:TakeSamples:SetOptionsOfSample1:E] Stopped 2018-01-23T00:11:37.642Z,1516666297.642 [DriftOrDonutAtChlPeak:TakeSamples:SetOptionsOfSample1](INFO): Completed DriftOrDonutAtChlPeak:TakeSamples:SetOptionsOfSample1 2018-01-23T00:11:37.642Z,1516666297.642 [DriftOrDonutAtChlPeak:TakeSamples:SetOptionsOfSample1] Stopped 2018-01-23T00:11:37.642Z,1516666297.642 [DriftOrDonutAtChlPeak:TakeSamples:SetOptionsOfSample1](DEBUG): Aggregate::uninitialize DriftOrDonutAtChlPeak:TakeSamples:SetOptionsOfSample1 2018-01-23T00:11:37.642Z,1516666297.642 [DriftOrDonutAtChlPeak:MissionStart:NeedComms] Running Loop=1 2018-01-23T00:11:37.646Z,1516666297.646 [DriftOrDonutAtChlPeak:MissionStart:NeedComms](DEBUG): Aggregate::initialize DriftOrDonutAtChlPeak:MissionStart:NeedComms 2018-01-23T00:11:37.647Z,1516666297.647 [DriftOrDonutAtChlPeak:MissionStart:NeedComms:B.GoToSurface] Running Loop=1 2018-01-23T00:11:37.647Z,1516666297.647 [DriftOrDonutAtChlPeak:MissionStart:NeedComms:B.GoToSurface](DEBUG): Initialize GoToSurfaceComponent. 2018-01-23T00:11:37.647Z,1516666297.647 [DriftOrDonutAtChlPeak:MissionStart:NeedComms:B.GoToSurface](INFO): Received depth rate setting nan m/s. 2018-01-23T00:11:37.647Z,1516666297.647 [DriftOrDonutAtChlPeak:MissionStart:NeedComms:B.GoToSurface](INFO): Received pitch setting 19.999999 degrees. 2018-01-23T00:11:37.648Z,1516666297.648 [DriftOrDonutAtChlPeak:MissionStart:NeedComms:B.GoToSurface](INFO): Received speed setting 1.000000 m/s. 2018-01-23T00:11:37.648Z,1516666297.648 [DriftOrDonutAtChlPeak:MissionStart:NeedComms:B.GoToSurface](DEBUG): No pitch timeout specified. Using default value of 20.000000 seconds. 2018-01-23T00:11:37.648Z,1516666297.648 [DriftOrDonutAtChlPeak:MissionStart:NeedComms:B.GoToSurface](DEBUG): No surface timeout specified. Using default value of 1000.000000 seconds. 2018-01-23T00:11:37.649Z,1516666297.649 [DriftOrDonutAtChlPeak:MissionStart:NeedComms:A] Running Loop=1 2018-01-23T00:11:37.663Z,1516666297.663 [DriftOrDonutAtChlPeak:MissionStart:NeedComms:A](INFO): last time_fix was: 1516665856.000000 second since 1970/01/01T00:00:00Z 2018-01-23T00:11:37.665Z,1516666297.665 [DriftOrDonutAtChlPeak:MissionStart:NeedComms:A] Stopped 2018-01-23T00:11:41.032Z,1516666301.032 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:11:41.086Z,1516666301.086 [DriftOrDonutAtChlPeak:MissionStart:NeedComms:C] Running Loop=1 2018-01-23T00:11:41.188Z,1516666301.188 [ThrusterServo](DEBUG): Initializing EZServoServo. 2018-01-23T00:11:41.308Z,1516666301.308 [ThrusterServo](DEBUG): Initializing ThrusterServo. 2018-01-23T00:11:41.312Z,1516666301.312 [CBIT](INFO): Clearing failed state for component ThrusterServo 2018-01-23T00:11:41.312Z,1516666301.312 [ThrusterServo] No Fault, FailCount= 1 2018-01-23T00:11:41.323Z,1516666301.323 [DataOverHttps](INFO): Received command:sched asap "set DriftOrDonutAtChlPeak.VertDist1 0 meter;run " 2s0es 3 3 2018-01-23T00:11:41.345Z,1516666301.345 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:11:41.396Z,1516666301.396 [CommandLine](IMPORTANT): got command schedule asap "set DriftOrDonutAtChlPeak.VertDist1 0 meter;run " 2s0es 3 3.000000 2018-01-23T00:11:41.396Z,1516666301.396 [CommandLine](IMPORTANT): Scheduling command #3 of 3 with id=2s0es 2018-01-23T00:11:41.397Z,1516666301.397 [CommandLine](IMPORTANT): Scheduled #5 (#3 of 3 with id='2s0es'): "set DriftOrDonutAtChlPeak.VertDist1 0 meter;run " ASAP 2018-01-23T00:11:41.460Z,1516666301.460 [DriftOrDonutAtChlPeak:MissionStart:NeedComms:C](DEBUG): Initialize ReadDataComponent to sense time_fix 2018-01-23T00:11:41.652Z,1516666301.652 [CommandLine](IMPORTANT): got command load ./Missions/Science/chlpeak_sampling_InAboveBelow.xml 2018-01-23T00:11:41.653Z,1516666301.653 [MissionManager](INFO): Uninitializing Mission DriftOrDonutAtChlPeak 2018-01-23T00:11:41.653Z,1516666301.653 [DriftOrDonutAtChlPeak] Stopped 2018-01-23T00:11:41.653Z,1516666301.653 [DriftOrDonutAtChlPeak](DEBUG): Aggregate::uninitialize DriftOrDonutAtChlPeak 2018-01-23T00:11:41.653Z,1516666301.653 [DriftOrDonutAtChlPeak:StandardEnvelopes] Stopped 2018-01-23T00:11:41.653Z,1516666301.653 [DriftOrDonutAtChlPeak:StandardEnvelopes](DEBUG): Aggregate::uninitialize DriftOrDonutAtChlPeak:StandardEnvelopes 2018-01-23T00:11:41.653Z,1516666301.653 [DriftOrDonutAtChlPeak:StandardEnvelopes:A.AltitudeEnvelope] Stopped 2018-01-23T00:11:41.653Z,1516666301.653 [DriftOrDonutAtChlPeak:StandardEnvelopes:A.AltitudeEnvelope](DEBUG): Uninitialize AltitudeEnvelopeComponent. 2018-01-23T00:11:41.654Z,1516666301.654 [DriftOrDonutAtChlPeak:StandardEnvelopes:B.DepthEnvelope] Stopped 2018-01-23T00:11:41.654Z,1516666301.654 [DriftOrDonutAtChlPeak:StandardEnvelopes:B.DepthEnvelope](DEBUG): Uninitialize. 2018-01-23T00:11:41.654Z,1516666301.654 [DriftOrDonutAtChlPeak:StandardEnvelopes:C.OffshoreEnvelope] Stopped 2018-01-23T00:11:41.654Z,1516666301.654 [DriftOrDonutAtChlPeak:StandardEnvelopes:C.OffshoreEnvelope](DEBUG): Uninitialize OffshoreEnvelopeComponent. 2018-01-23T00:11:41.654Z,1516666301.654 [DriftOrDonutAtChlPeak:AbortDrift] Stopped 2018-01-23T00:11:41.654Z,1516666301.654 [DriftOrDonutAtChlPeak:AbortDrift](DEBUG): Aggregate::uninitialize DriftOrDonutAtChlPeak:AbortDrift 2018-01-23T00:11:41.687Z,1516666301.687 [DriftOrDonutAtChlPeak:AbortDrift:B.AbortDrift] Stopped 2018-01-23T00:11:41.687Z,1516666301.687 [DriftOrDonutAtChlPeak:AbortDrift:B.AbortDrift](INFO): Uninitializing AbortDrift. 2018-01-23T00:11:41.687Z,1516666301.687 [DriftOrDonutAtChlPeak:H.Pitch] Stopped 2018-01-23T00:11:41.687Z,1516666301.687 [DriftOrDonutAtChlPeak:Science] Stopped 2018-01-23T00:11:41.687Z,1516666301.687 [DriftOrDonutAtChlPeak:Science](DEBUG): Aggregate::uninitialize DriftOrDonutAtChlPeak:Science 2018-01-23T00:11:41.687Z,1516666301.687 [DriftOrDonutAtChlPeak:Science:A] Stopped 2018-01-23T00:11:41.687Z,1516666301.687 [DriftOrDonutAtChlPeak:Science:C] Stopped 2018-01-23T00:11:41.687Z,1516666301.687 [DriftOrDonutAtChlPeak:Science:D] Stopped 2018-01-23T00:11:41.688Z,1516666301.688 [DriftOrDonutAtChlPeak:Science:G] Stopped 2018-01-23T00:11:41.688Z,1516666301.688 [DriftOrDonutAtChlPeak:Science:H] Stopped 2018-01-23T00:11:41.688Z,1516666301.688 [DriftOrDonutAtChlPeak:Science:PeakDetectChl] Stopped 2018-01-23T00:11:41.688Z,1516666301.688 [DriftOrDonutAtChlPeak:Science:PeakDetectChl](DEBUG): Aggregate::uninitialize DriftOrDonutAtChlPeak:Science:PeakDetectChl 2018-01-23T00:11:41.688Z,1516666301.688 [DriftOrDonutAtChlPeak:Science:PeakDetectChl:A.PeakDetectVsDepth] Stopped 2018-01-23T00:11:41.688Z,1516666301.688 [DriftOrDonutAtChlPeak:Science:PeakDetectChl:A.PeakDetectVsDepth](DEBUG): Uninitialize. 2018-01-23T00:11:41.688Z,1516666301.688 [DriftOrDonutAtChlPeak:Science:HighestChlPeakReport] Stopped 2018-01-23T00:11:41.688Z,1516666301.688 [DriftOrDonutAtChlPeak:Science:HighestChlPeakReport](DEBUG): Aggregate::uninitialize DriftOrDonutAtChlPeak:Science:HighestChlPeakReport 2018-01-23T00:11:41.689Z,1516666301.689 [DriftOrDonutAtChlPeak:Science:HighestChlPeakReport:A.PeakDetectHorizontal] Stopped 2018-01-23T00:11:41.689Z,1516666301.689 [DriftOrDonutAtChlPeak:Science:HighestChlPeakReport:A.PeakDetectHorizontal](DEBUG): Uninitialize. 2018-01-23T00:11:41.689Z,1516666301.689 [DriftOrDonutAtChlPeak:J.AltitudeEnvelope] Stopped 2018-01-23T00:11:41.689Z,1516666301.689 [DriftOrDonutAtChlPeak:J.AltitudeEnvelope](DEBUG): Uninitialize AltitudeEnvelopeComponent. 2018-01-23T00:11:41.689Z,1516666301.689 [DriftOrDonutAtChlPeak:MissionStart] Stopped 2018-01-23T00:11:41.689Z,1516666301.689 [DriftOrDonutAtChlPeak:MissionStart](DEBUG): Aggregate::uninitialize DriftOrDonutAtChlPeak:MissionStart 2018-01-23T00:11:41.689Z,1516666301.689 [DriftOrDonutAtChlPeak:MissionStart:NeedComms] Stopped 2018-01-23T00:11:41.690Z,1516666301.690 [DriftOrDonutAtChlPeak:MissionStart:NeedComms](DEBUG): Aggregate::uninitialize DriftOrDonutAtChlPeak:MissionStart:NeedComms 2018-01-23T00:11:41.690Z,1516666301.690 [DriftOrDonutAtChlPeak:MissionStart:NeedComms:B.GoToSurface] Stopped 2018-01-23T00:11:41.690Z,1516666301.690 [DriftOrDonutAtChlPeak:MissionStart:NeedComms:B.GoToSurface](DEBUG): Uninitialize GoToSurfaceComponent. 2018-01-23T00:11:41.690Z,1516666301.690 [DriftOrDonutAtChlPeak:MissionStart:NeedComms:C] Stopped 2018-01-23T00:11:41.690Z,1516666301.690 [DriftOrDonutAtChlPeak:MissionStart:MissionStartComms] Stopped 2018-01-23T00:11:41.690Z,1516666301.690 [DriftOrDonutAtChlPeak:MissionStart:MissionStartComms](DEBUG): Aggregate::uninitialize DriftOrDonutAtChlPeak:MissionStart:MissionStartComms 2018-01-23T00:11:41.691Z,1516666301.691 [DriftOrDonutAtChlPeak:TakeSamples] Stopped 2018-01-23T00:11:41.691Z,1516666301.691 [DriftOrDonutAtChlPeak:TakeSamples](DEBUG): Aggregate::uninitialize DriftOrDonutAtChlPeak:TakeSamples 2018-01-23T00:11:41.754Z,1516666301.754 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:11:41.909Z,1516666301.909 [WetLabsBB2FL](INFO): Powering down 2018-01-23T00:11:42.051Z,1516666302.051 [CTD_Seabird](INFO): Stopping potential previous instance(s) of CTD_Seabird LCM interface 2018-01-23T00:11:42.133Z,1516666302.133 [Aanderaa_O2](INFO): Powering down 2018-01-23T00:11:42.177Z,1516666302.177 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:11:42.379Z,1516666302.379 [MissionManager](INFO): Loading Mission: ./Missions/Science/chlpeak_sampling_InAboveBelow.xml 2018-01-23T00:11:42.451Z,1516666302.451 [CTD_Seabird](INFO): Started Seabird LCM interface with command:nohup ./lrauv-framework/onboard/bin/gpctd -ldir /mnt/mmc/LRAUV/Logs/latest/ -dev /dev/ttyC6 -b 9600 >& /dev/null & 2018-01-23T00:11:42.523Z,1516666302.523 [CTD_Seabird](INFO): LCM subscribed to channel:ctd_t.seabird-gpctd 2018-01-23T00:11:42.561Z,1516666302.561 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:11:42.976Z,1516666302.976 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:11:43.312Z,1516666303.312 [CTD_Seabird](INFO): Stopping potential previous instance(s) of CTD_Seabird LCM interface 2018-01-23T00:11:43.312Z,1516666303.312 [CTD_Seabird](INFO): Powering down 2018-01-23T00:11:43.364Z,1516666303.364 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:11:43.763Z,1516666303.763 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:11:44.170Z,1516666304.170 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:11:44.461Z,1516666304.461 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak.NumESPSamplers = 9.000000 count 2018-01-23T00:11:44.463Z,1516666304.463 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak.MissionTimeout = 20.000000 h 2018-01-23T00:11:44.465Z,1516666304.465 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak.NeedCommsTimeInTransect = 60.000000 min 2018-01-23T00:11:44.468Z,1516666304.468 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak.AcousticTrackingTimeout = 21.000000 h 2018-01-23T00:11:44.505Z,1516666304.505 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak.MaxWaitNoFiring = 4.000000 h 2018-01-23T00:11:44.507Z,1516666304.507 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak.CylinderTimeout = 60.000000 min 2018-01-23T00:11:44.509Z,1516666304.509 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak.WaitDepthUndulation = 10.000000 min 2018-01-23T00:11:44.512Z,1516666304.512 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak.FindHighChlLocation = 1 bool 2018-01-23T00:11:44.513Z,1516666304.513 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak.CylinderYoYo = 1 bool 2018-01-23T00:11:44.516Z,1516666304.516 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak.SpeedFindHighChlLatLon = 1.000000 m/s 2018-01-23T00:11:44.518Z,1516666304.518 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak.SpeedChlPeakHoldingSampling = 1.000000 m/s 2018-01-23T00:11:44.564Z,1516666304.564 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak.SpeedSpiral = 1.000000 m/s 2018-01-23T00:11:44.570Z,1516666304.570 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak.MaxDepth = 50.000000 m 2018-01-23T00:11:44.592Z,1516666304.592 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:11:44.608Z,1516666304.608 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak.ShallowBoundChl = 4.500000 m 2018-01-23T00:11:44.615Z,1516666304.615 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak.DeepBoundChl = 27.000000 m 2018-01-23T00:11:44.617Z,1516666304.617 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak.CylinderYoYoMinDep = 4.500000 m 2018-01-23T00:11:44.631Z,1516666304.631 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak.CylinderYoYoMaxDep = 27.000000 m 2018-01-23T00:11:44.633Z,1516666304.633 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak.CylinderRadius = 200.000000 m 2018-01-23T00:11:44.640Z,1516666304.640 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak.MaxCirclesOnCylinder = 1.000000 count 2018-01-23T00:11:44.659Z,1516666304.659 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak.RepeatTransects = 1.000000 count 2018-01-23T00:11:44.661Z,1516666304.661 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak.Lat1 = nan arcdeg 2018-01-23T00:11:44.668Z,1516666304.668 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak.Lon1 = nan arcdeg 2018-01-23T00:11:44.670Z,1516666304.670 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak.Lat2 = nan arcdeg 2018-01-23T00:11:44.682Z,1516666304.682 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak.Lon2 = nan arcdeg 2018-01-23T00:11:44.707Z,1516666304.707 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak.Lat3 = nan arcdeg 2018-01-23T00:11:44.709Z,1516666304.709 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak.Lon3 = nan arcdeg 2018-01-23T00:11:44.711Z,1516666304.711 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak.Lat4 = nan arcdeg 2018-01-23T00:11:44.713Z,1516666304.713 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak.Lon4 = nan arcdeg 2018-01-23T00:11:44.723Z,1516666304.723 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak.VertDist1 = nan m 2018-01-23T00:11:44.725Z,1516666304.725 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak.VertDist2 = nan m 2018-01-23T00:11:44.727Z,1516666304.727 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak.VertDist3 = nan m 2018-01-23T00:11:44.729Z,1516666304.729 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak.VertDist4 = nan m 2018-01-23T00:11:44.741Z,1516666304.741 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak.VertDist5 = nan m 2018-01-23T00:11:44.743Z,1516666304.743 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak.VertDist6 = nan m 2018-01-23T00:11:44.745Z,1516666304.745 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak.VertDist7 = nan m 2018-01-23T00:11:44.755Z,1516666304.755 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak.VertDist8 = nan m 2018-01-23T00:11:44.757Z,1516666304.757 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak.VertDist9 = nan m 2018-01-23T00:11:44.759Z,1516666304.759 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak.VertDist10 = nan m 2018-01-23T00:11:44.762Z,1516666304.762 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak.VertDist11 = nan m 2018-01-23T00:11:44.768Z,1516666304.768 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak.VertDist12 = nan m 2018-01-23T00:11:44.779Z,1516666304.779 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak.VertDist13 = nan m 2018-01-23T00:11:44.783Z,1516666304.783 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak.VertDist14 = nan m 2018-01-23T00:11:44.785Z,1516666304.785 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak.VertDist15 = nan m 2018-01-23T00:11:44.795Z,1516666304.795 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak.VertDist16 = nan m 2018-01-23T00:11:44.797Z,1516666304.797 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak.VertDist17 = nan m 2018-01-23T00:11:44.800Z,1516666304.800 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak.VertDist18 = nan m 2018-01-23T00:11:44.802Z,1516666304.802 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak.VertDist19 = nan m 2018-01-23T00:11:44.808Z,1516666304.808 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak.VertDist20 = nan m 2018-01-23T00:11:44.810Z,1516666304.810 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak.Dep1 = nan m 2018-01-23T00:11:44.834Z,1516666304.834 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak.Dep2 = nan m 2018-01-23T00:11:44.836Z,1516666304.836 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak.Dep3 = nan m 2018-01-23T00:11:44.838Z,1516666304.838 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak.Dep4 = nan m 2018-01-23T00:11:44.853Z,1516666304.853 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak.Dep5 = nan m 2018-01-23T00:11:44.861Z,1516666304.861 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak.Dep6 = nan m 2018-01-23T00:11:44.864Z,1516666304.864 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak.Dep7 = nan m 2018-01-23T00:11:44.866Z,1516666304.866 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak.Dep8 = nan m 2018-01-23T00:11:44.868Z,1516666304.868 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak.Dep9 = nan m 2018-01-23T00:11:44.870Z,1516666304.870 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak.Dep10 = nan m 2018-01-23T00:11:44.888Z,1516666304.888 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak.Dep11 = nan m 2018-01-23T00:11:44.890Z,1516666304.890 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak.Dep12 = nan m 2018-01-23T00:11:44.900Z,1516666304.900 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak.Dep13 = nan m 2018-01-23T00:11:44.911Z,1516666304.911 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak.Dep14 = nan m 2018-01-23T00:11:44.913Z,1516666304.913 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak.Dep15 = nan m 2018-01-23T00:11:44.919Z,1516666304.919 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak.Dep16 = nan m 2018-01-23T00:11:44.922Z,1516666304.922 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak.Dep17 = nan m 2018-01-23T00:11:44.929Z,1516666304.929 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak.Dep18 = nan m 2018-01-23T00:11:44.965Z,1516666304.965 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:11:44.979Z,1516666304.979 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak.Dep19 = nan m 2018-01-23T00:11:44.981Z,1516666304.981 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak.Dep20 = nan m 2018-01-23T00:11:44.991Z,1516666304.991 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak.Reacq1 = 0 bool 2018-01-23T00:11:44.993Z,1516666304.993 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak.Reacq2 = 0 bool 2018-01-23T00:11:44.999Z,1516666304.999 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak.Reacq3 = 0 bool 2018-01-23T00:11:45.008Z,1516666305.008 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak.Reacq4 = 0 bool 2018-01-23T00:11:45.010Z,1516666305.010 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak.Reacq5 = 0 bool 2018-01-23T00:11:45.027Z,1516666305.027 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak.Reacq6 = 0 bool 2018-01-23T00:11:45.029Z,1516666305.029 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak.Reacq7 = 0 bool 2018-01-23T00:11:45.036Z,1516666305.036 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak.Reacq8 = 0 bool 2018-01-23T00:11:45.051Z,1516666305.051 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak.Reacq9 = 0 bool 2018-01-23T00:11:45.053Z,1516666305.053 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak.Reacq10 = 0 bool 2018-01-23T00:11:45.063Z,1516666305.063 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak.Reacq11 = 0 bool 2018-01-23T00:11:45.065Z,1516666305.065 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak.Reacq12 = 0 bool 2018-01-23T00:11:45.074Z,1516666305.074 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak.Reacq13 = 0 bool 2018-01-23T00:11:45.080Z,1516666305.080 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak.Reacq14 = 0 bool 2018-01-23T00:11:45.082Z,1516666305.082 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak.Reacq15 = 0 bool 2018-01-23T00:11:45.088Z,1516666305.088 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak.Reacq16 = 0 bool 2018-01-23T00:11:45.119Z,1516666305.119 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak.Reacq17 = 0 bool 2018-01-23T00:11:45.121Z,1516666305.121 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak.Reacq18 = 0 bool 2018-01-23T00:11:45.127Z,1516666305.127 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak.Reacq19 = 0 bool 2018-01-23T00:11:45.129Z,1516666305.129 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak.Reacq20 = 0 bool 2018-01-23T00:11:45.135Z,1516666305.135 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak.RptSurface1 = 0 bool 2018-01-23T00:11:45.137Z,1516666305.137 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak.RptSurface2 = 0 bool 2018-01-23T00:11:45.143Z,1516666305.143 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak.RptSurface3 = 0 bool 2018-01-23T00:11:45.145Z,1516666305.145 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak.RptSurface4 = 0 bool 2018-01-23T00:11:45.152Z,1516666305.152 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak.RptSurface5 = 0 bool 2018-01-23T00:11:45.154Z,1516666305.154 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak.RptSurface6 = 0 bool 2018-01-23T00:11:45.160Z,1516666305.160 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak.RptSurface7 = 0 bool 2018-01-23T00:11:45.162Z,1516666305.162 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak.RptSurface8 = 0 bool 2018-01-23T00:11:45.184Z,1516666305.184 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak.RptSurface9 = 0 bool 2018-01-23T00:11:45.186Z,1516666305.186 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak.RptSurface10 = 0 bool 2018-01-23T00:11:45.192Z,1516666305.192 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak.RptSurface11 = 0 bool 2018-01-23T00:11:45.194Z,1516666305.194 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak.RptSurface12 = 0 bool 2018-01-23T00:11:45.204Z,1516666305.204 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak.RptSurface13 = 0 bool 2018-01-23T00:11:45.206Z,1516666305.206 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak.RptSurface14 = 0 bool 2018-01-23T00:11:45.216Z,1516666305.216 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak.RptSurface15 = 0 bool 2018-01-23T00:11:45.218Z,1516666305.218 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak.RptSurface16 = 0 bool 2018-01-23T00:11:45.224Z,1516666305.224 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak.RptSurface17 = 0 bool 2018-01-23T00:11:45.226Z,1516666305.226 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak.RptSurface18 = 0 bool 2018-01-23T00:11:45.228Z,1516666305.228 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak.RptSurface19 = 0 bool 2018-01-23T00:11:45.230Z,1516666305.230 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak.RptSurface20 = 0 bool 2018-01-23T00:11:45.240Z,1516666305.240 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak.UpRate = -0.040000 m/s 2018-01-23T00:11:45.247Z,1516666305.247 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak.DownRate = 0.200000 m/s 2018-01-23T00:11:45.249Z,1516666305.249 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak.YoYoMinAltitude = 9.000000 m 2018-01-23T00:11:45.261Z,1516666305.261 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak.MinAltitude = 7.000000 m 2018-01-23T00:11:45.267Z,1516666305.267 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak.MinOffshore = 2.000000 km 2018-01-23T00:11:45.269Z,1516666305.269 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak.VertMargin = 3.000000 m 2018-01-23T00:11:45.283Z,1516666305.283 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak.VerticalPerturbation = 6.000000 m 2018-01-23T00:11:45.285Z,1516666305.285 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak.VerticalTolerance = 0.100000 m 2018-01-23T00:11:45.291Z,1516666305.291 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak.RiseFromTurningDepth = 1.500000 m 2018-01-23T00:11:45.293Z,1516666305.293 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak.CylinderCircleMaxError = 100.000000 m 2018-01-23T00:11:45.295Z,1516666305.295 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak.CylinderCircleTurnToPort = 0 bool 2018-01-23T00:11:45.297Z,1516666305.297 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak.KwpHeading = 0.010000 rad/m 2018-01-23T00:11:45.308Z,1516666305.308 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak.YoYoUpPitch = 20.000000 arcdeg 2018-01-23T00:11:45.310Z,1516666305.310 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak.YoYoDownPitch = -20.000000 arcdeg 2018-01-23T00:11:45.316Z,1516666305.316 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak.RudderAngleSpiral = 13.000000 arcdeg 2018-01-23T00:11:45.323Z,1516666305.323 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak.NumberOfProfilesSlidingwindow = 100.000000 count 2018-01-23T00:11:45.325Z,1516666305.325 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak.LPWindowLength = 40.000000 count 2018-01-23T00:11:45.360Z,1516666305.360 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak.BuoyancyNeutral = 180.000003 cc 2018-01-23T00:11:45.386Z,1516666305.386 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak.MassDefault = 1.500000 cm 2018-01-23T00:11:45.397Z,1516666305.397 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak.YoYoMinDepth = 4.500000 m 2018-01-23T00:11:45.409Z,1516666305.409 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:11:45.416Z,1516666305.416 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak.YoYoMaxDepth = 27.000000 m 2018-01-23T00:11:45.418Z,1516666305.418 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak.DepthSet = 10.000000 m 2018-01-23T00:11:45.432Z,1516666305.432 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak.DepthDesignated = nan m 2018-01-23T00:11:45.434Z,1516666305.434 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak.VertDistance = nan m 2018-01-23T00:11:45.456Z,1516666305.456 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak.ReportAtSurface = 0 bool 2018-01-23T00:11:45.458Z,1516666305.458 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak.ReportAtSurfaceDone = 0 bool 2018-01-23T00:11:45.473Z,1516666305.473 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak.ReportAtSurfaceToUse = 0 bool 2018-01-23T00:11:45.491Z,1516666305.491 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak.ReacquirePeak = 0 bool 2018-01-23T00:11:45.493Z,1516666305.493 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak.SampleOptionsSet = 0 bool 2018-01-23T00:11:45.495Z,1516666305.495 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak.SampleCompleted = 0 bool 2018-01-23T00:11:45.496Z,1516666305.496 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak.StoppedForNoFiringForTooLong = 0 bool 2018-01-23T00:11:45.511Z,1516666305.511 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak.DepthLogged = 0.000000 m 2018-01-23T00:11:45.513Z,1516666305.513 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak.ChlLogged = 0.000000 ug/l 2018-01-23T00:11:45.523Z,1516666305.523 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak.StartVerticalManeuverForChlPeakSampling = 0 bool 2018-01-23T00:11:45.526Z,1516666305.526 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak.Surfacing = 0 bool 2018-01-23T00:11:45.540Z,1516666305.540 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak.FlagTargetDepthSet = 0 bool 2018-01-23T00:11:45.542Z,1516666305.542 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak.FlagGoUp = 0 bool 2018-01-23T00:11:45.556Z,1516666305.556 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak.FlagGoDown = 0 bool 2018-01-23T00:11:45.558Z,1516666305.558 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak.FlagDiveFromSurface = 1 bool 2018-01-23T00:11:45.562Z,1516666305.562 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak.FlagPeakDepthSet = 0 bool 2018-01-23T00:11:45.572Z,1516666305.572 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak.EnableSettingPeakDepth = 1 bool 2018-01-23T00:11:45.579Z,1516666305.579 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak.FlagFirstDive = 1 bool 2018-01-23T00:11:45.581Z,1516666305.581 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak.FlagSamplingOngoing = 0 bool 2018-01-23T00:11:45.587Z,1516666305.587 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak.FlagFired = 0 bool 2018-01-23T00:11:45.589Z,1516666305.589 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak.PeakChlDepthSet = 10.000000 m 2018-01-23T00:11:45.595Z,1516666305.595 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak.PeakChlSet = 0.000000 ug/l 2018-01-23T00:11:45.597Z,1516666305.597 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak.DepthHeld = 10.000000 m 2018-01-23T00:11:45.603Z,1516666305.603 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak.SyslogGoUp = 0 bool 2018-01-23T00:11:45.605Z,1516666305.605 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak.SyslogGoDown = 0 bool 2018-01-23T00:11:45.612Z,1516666305.612 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak.SyslogHoldDepth = 0 bool 2018-01-23T00:11:45.614Z,1516666305.614 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak.FromLastTimeFixToStartVerticalManeuver = nan min 2018-01-23T00:11:45.620Z,1516666305.620 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak.FromLastTimeFixToNow = nan min 2018-01-23T00:11:45.622Z,1516666305.622 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak.FromLastTimeFixToLastFiring = nan min 2018-01-23T00:11:45.628Z,1516666305.628 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak.CylinderLat = nan arcdeg 2018-01-23T00:11:45.635Z,1516666305.635 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak.CylinderLon = nan arcdeg 2018-01-23T00:11:45.637Z,1516666305.637 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak.CntSamples = 1.000000 count 2018-01-23T00:11:45.637Z,1516666305.637 [MissionManager](INFO): Inserting Stack: Missions/Insert/StandardEnvelopes.xml 2018-01-23T00:11:45.673Z,1516666305.673 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak:StandardEnvelopes.MinAltitude = 5.000000 m 2018-01-23T00:11:45.680Z,1516666305.680 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak:StandardEnvelopes.MaxDepth = 200.000000 m 2018-01-23T00:11:45.682Z,1516666305.682 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak:StandardEnvelopes.MinOffshore = 2000.000000 m 2018-01-23T00:11:45.695Z,1516666305.695 [DriftOrDonutAtChlPeak:StandardEnvelopes:A.AltitudeEnvelope](DEBUG): Construct AltitudeEnvelope. 2018-01-23T00:11:45.700Z,1516666305.700 [DriftOrDonutAtChlPeak:StandardEnvelopes:B.DepthEnvelope](DEBUG): Construct DepthEnvelope. 2018-01-23T00:11:45.705Z,1516666305.705 [DriftOrDonutAtChlPeak:StandardEnvelopes:C.OffshoreEnvelope](DEBUG): Construct OffshoreEnvelope. 2018-01-23T00:11:45.714Z,1516666305.714 [MissionManager](INFO): Inserting Stack: Missions/Insert/AbortDrift.xml 2018-01-23T00:11:45.760Z,1516666305.760 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:11:45.811Z,1516666305.811 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak:AbortDrift.AcousticTimeout = 96.000000 h 2018-01-23T00:11:45.813Z,1516666305.813 [DriftOrDonutAtChlPeak:AbortDrift:B.AbortDrift](DEBUG): Construct AbortDrift. 2018-01-23T00:11:45.815Z,1516666305.815 [DriftOrDonutAtChlPeak:AbortDrift:C.Execute](DEBUG): Construct Execute. 2018-01-23T00:11:45.819Z,1516666305.819 [MissionManager](INFO): RedefineArg DriftOrDonutAtChlPeak:AbortDrift.AcousticTimeout = reader:DriftOrDonutAtChlPeak.AcousticTrackingTimeout 2018-01-23T00:11:45.820Z,1516666305.820 [MissionManager](INFO): Inserting Stack: Missions/Insert/SampleAtDepth.xml 2018-01-23T00:11:45.884Z,1516666305.884 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak:SampleAtDepth.TargetDepth = 5.000000 m 2018-01-23T00:11:45.887Z,1516666305.887 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak:SampleAtDepth.SettleTime = 30.000000 s 2018-01-23T00:11:45.889Z,1516666305.889 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak:SampleAtDepth.RotateOnly = 0.000000 bool 2018-01-23T00:11:45.891Z,1516666305.891 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak:SampleAtDepth.UseCANONSampler = 0.000000 bool 2018-01-23T00:11:45.894Z,1516666305.894 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak:SampleAtDepth.UseESP = 1.000000 bool 2018-01-23T00:11:45.896Z,1516666305.896 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak:SampleAtDepth.CANONSamplerTriggerTimeout = 1.000000 min 2018-01-23T00:11:45.898Z,1516666305.898 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak:SampleAtDepth.CANONSamplerTimeout = 6.000000 min 2018-01-23T00:11:45.900Z,1516666305.900 [DriftOrDonutAtChlPeak:SampleAtDepth:B.Pitch](DEBUG): Construct. 2018-01-23T00:11:45.906Z,1516666305.906 [DriftOrDonutAtChlPeak:SampleAtDepth:D.Wait](DEBUG): Construct Wait. 2018-01-23T00:11:45.914Z,1516666305.914 [DriftOrDonutAtChlPeak:SampleAtDepth:SampleWrapper:SampleCANONSampler:TriggerCANONSampler:A_Timeout:B.Execute](DEBUG): Construct Execute. 2018-01-23T00:11:45.917Z,1516666305.917 [MissionManager](ERROR): Slate does not contain CTD_NeilBrown.bin_mean_sea_water_temperature 2018-01-23T00:11:45.917Z,1516666305.917 [MissionManager](ERROR): Slate does not contain celsius 2018-01-23T00:11:45.921Z,1516666305.921 [DriftOrDonutAtChlPeak:SampleAtDepth:SampleWrapper:SampleCANONSampler:E:A_Timeout:B.Execute](DEBUG): Construct Execute. 2018-01-23T00:11:45.925Z,1516666305.925 [MissionManager](ERROR): Slate does not contain CTD_NeilBrown.bin_mean_sea_water_temperature 2018-01-23T00:11:45.926Z,1516666305.926 [MissionManager](ERROR): Slate does not contain celsius 2018-01-23T00:11:45.977Z,1516666305.977 [DriftOrDonutAtChlPeak:H.Pitch](DEBUG): Construct. 2018-01-23T00:11:45.980Z,1516666305.980 [MissionManager](INFO): Inserting Stack: Missions/Insert/Science.xml 2018-01-23T00:11:46.161Z,1516666306.161 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:11:46.272Z,1516666306.272 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak:Science.SampleISUS = 0 bool 2018-01-23T00:11:46.274Z,1516666306.274 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak:Science.SampleISUSmaxPitch = 60.000000 arcdeg 2018-01-23T00:11:46.276Z,1516666306.276 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak:Science.SampleISUSminPitch = -60.000000 arcdeg 2018-01-23T00:11:46.278Z,1516666306.278 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak:Science.PeakDetectChlActive = 0 bool 2018-01-23T00:11:46.280Z,1516666306.280 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak:Science.HighestChlPeakReportActive = 0 bool 2018-01-23T00:11:46.282Z,1516666306.282 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak:Science.PatchTracking = 0 bool 2018-01-23T00:11:46.284Z,1516666306.284 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak:Science.FilterWidthHorizontal = 3.000000 count 2018-01-23T00:11:46.286Z,1516666306.286 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak:Science.NumProfilesSlidingwindow = 100.000000 count 2018-01-23T00:11:46.288Z,1516666306.288 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak:Science.PeakDetectNO3Active = 0 bool 2018-01-23T00:11:46.290Z,1516666306.290 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak:Science.PeakDetectOilActive = 0 bool 2018-01-23T00:11:46.292Z,1516666306.292 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak:Science.UpwardDerivativeOfTemperatureActive = 0 bool 2018-01-23T00:11:46.294Z,1516666306.294 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak:Science.EnabledAanderaaO2 = 1.000000 bool 2018-01-23T00:11:46.296Z,1516666306.296 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak:Science.EnabledNeilBrown = 0.000000 bool 2018-01-23T00:11:46.299Z,1516666306.299 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak:Science.EnabledSeabird = 1.000000 bool 2018-01-23T00:11:46.301Z,1516666306.301 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak:Science.EnabledTurbulence_NPS = 0.000000 bool 2018-01-23T00:11:46.304Z,1516666306.304 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak:Science.EnabledWetLabsBB2FL = 1.000000 bool 2018-01-23T00:11:46.306Z,1516666306.306 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak:Science.EnabledWetLabsSeaOWL_UV_A = 1.000000 bool 2018-01-23T00:11:46.308Z,1516666306.308 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak:Science.EnabledISUS = 0.000000 bool 2018-01-23T00:11:46.311Z,1516666306.311 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak:Science.LowPassWindowLength = 20.000000 count 2018-01-23T00:11:46.313Z,1516666306.313 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak:Science.PeakChlShallowBound = nan m 2018-01-23T00:11:46.315Z,1516666306.315 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak:Science.PeakChlDeepBound = nan m 2018-01-23T00:11:46.317Z,1516666306.317 [MissionManager](INFO): DefineOutput DriftOrDonutAtChlPeak:Science.PeakChl = 0.000000 ug/l 2018-01-23T00:11:46.320Z,1516666306.320 [MissionManager](INFO): DefineOutput DriftOrDonutAtChlPeak:Science.PeakChlDepth = 0.000000 m 2018-01-23T00:11:46.322Z,1516666306.322 [MissionManager](INFO): DefineOutput DriftOrDonutAtChlPeak:Science.PeakChlTemperature = 0.000000 degC 2018-01-23T00:11:46.324Z,1516666306.324 [MissionManager](INFO): DefineOutput DriftOrDonutAtChlPeak:Science.PeakChlLatitude = nan arcdeg 2018-01-23T00:11:46.327Z,1516666306.327 [MissionManager](INFO): DefineOutput DriftOrDonutAtChlPeak:Science.PeakChlLongitude = nan arcdeg 2018-01-23T00:11:46.329Z,1516666306.329 [MissionManager](INFO): DefineOutput DriftOrDonutAtChlPeak:Science.PeakNO3 = 0.000000 umol/l 2018-01-23T00:11:46.331Z,1516666306.331 [MissionManager](INFO): DefineOutput DriftOrDonutAtChlPeak:Science.PeakNO3Depth = 0.000000 m 2018-01-23T00:11:46.333Z,1516666306.333 [MissionManager](INFO): DefineOutput DriftOrDonutAtChlPeak:Science.PeakNO3Latitude = nan arcdeg 2018-01-23T00:11:46.335Z,1516666306.335 [MissionManager](INFO): DefineOutput DriftOrDonutAtChlPeak:Science.PeakNO3Longitude = nan arcdeg 2018-01-23T00:11:46.337Z,1516666306.337 [MissionManager](INFO): DefineOutput DriftOrDonutAtChlPeak:Science.PatchChl = 0.000000 m 2018-01-23T00:11:46.340Z,1516666306.340 [MissionManager](INFO): DefineOutput DriftOrDonutAtChlPeak:Science.PatchChlDepth = 0.000000 m 2018-01-23T00:11:46.343Z,1516666306.343 [MissionManager](INFO): DefineOutput DriftOrDonutAtChlPeak:Science.PatchChlLatitude = nan arcdeg 2018-01-23T00:11:46.345Z,1516666306.345 [MissionManager](INFO): DefineOutput DriftOrDonutAtChlPeak:Science.PatchChlLongitude = nan arcdeg 2018-01-23T00:11:46.347Z,1516666306.347 [MissionManager](INFO): DefineOutput DriftOrDonutAtChlPeak:Science.PatchChlDistance = nan arcdeg 2018-01-23T00:11:46.349Z,1516666306.349 [MissionManager](INFO): DefineOutput DriftOrDonutAtChlPeak:Science.PeakOil = 0.000000 kg/m3 2018-01-23T00:11:46.358Z,1516666306.358 [MissionManager](INFO): DefineOutput DriftOrDonutAtChlPeak:Science.PeakOilDepth = 0.000000 m 2018-01-23T00:11:46.360Z,1516666306.360 [MissionManager](INFO): DefineOutput DriftOrDonutAtChlPeak:Science.PeakOilLatitude = nan arcdeg 2018-01-23T00:11:46.364Z,1516666306.364 [MissionManager](INFO): DefineOutput DriftOrDonutAtChlPeak:Science.PeakOilLongitude = nan arcdeg 2018-01-23T00:11:46.378Z,1516666306.378 [DriftOrDonutAtChlPeak:Science:PeakDetectChl:A.PeakDetectVsDepth](DEBUG): Construct PeakDetectVsDepth. 2018-01-23T00:11:46.388Z,1516666306.388 [DriftOrDonutAtChlPeak:Science:HighestChlPeakReport:A.PeakDetectHorizontal](DEBUG): Construct PeakDetectHorizontal. 2018-01-23T00:11:46.399Z,1516666306.399 [DriftOrDonutAtChlPeak:Science:PeakDetectNO3:A.PeakDetectVsDepth](DEBUG): Construct PeakDetectVsDepth. 2018-01-23T00:11:46.407Z,1516666306.407 [DriftOrDonutAtChlPeak:Science:PeakDetectOil:A.PeakDetectVsDepth](DEBUG): Construct PeakDetectVsDepth. 2018-01-23T00:11:46.415Z,1516666306.415 [MissionManager](INFO): RedefineArg DriftOrDonutAtChlPeak:Science.PeakDetectChlActive = value:1 bool 2018-01-23T00:11:46.417Z,1516666306.417 [MissionManager](INFO): RedefineArg DriftOrDonutAtChlPeak:Science.HighestChlPeakReportActive = value:1 bool 2018-01-23T00:11:46.418Z,1516666306.418 [MissionManager](INFO): RedefineArg DriftOrDonutAtChlPeak:Science.LowPassWindowLength = reader:DriftOrDonutAtChlPeak.LPWindowLength 2018-01-23T00:11:46.420Z,1516666306.420 [MissionManager](INFO): RedefineArg DriftOrDonutAtChlPeak:Science.NumProfilesSlidingwindow = reader:DriftOrDonutAtChlPeak.NumberOfProfilesSlidingwindow 2018-01-23T00:11:46.421Z,1516666306.421 [MissionManager](INFO): RedefineArg DriftOrDonutAtChlPeak:Science.PeakChlShallowBound = reader:DriftOrDonutAtChlPeak.ShallowBoundChl 2018-01-23T00:11:46.423Z,1516666306.423 [MissionManager](INFO): RedefineArg DriftOrDonutAtChlPeak:Science.PeakChlDeepBound = reader:DriftOrDonutAtChlPeak.DeepBoundChl 2018-01-23T00:11:46.424Z,1516666306.424 [DriftOrDonutAtChlPeak:J.AltitudeEnvelope](DEBUG): Construct AltitudeEnvelope. 2018-01-23T00:11:46.443Z,1516666306.443 [MissionManager](INFO): Inserting Stack: Missions/Insert/NeedComms.xml 2018-01-23T00:11:46.483Z,1516666306.483 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak:MissionStart:NeedComms.DiveInterval = 3.000000 h 2018-01-23T00:11:46.485Z,1516666306.485 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak:MissionStart:NeedComms.WaitForPitchUp = 10.000000 min 2018-01-23T00:11:46.488Z,1516666306.488 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak:MissionStart:NeedComms.SurfacePitch = 20.000000 arcdeg 2018-01-23T00:11:46.490Z,1516666306.490 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak:MissionStart:NeedComms.SurfaceDepthRate = nan m/s 2018-01-23T00:11:46.492Z,1516666306.492 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak:MissionStart:NeedComms.SurfaceSpeed = 1.000000 m/s 2018-01-23T00:11:46.494Z,1516666306.494 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak:MissionStart:NeedComms.GPSTimeout = 7.000000 min 2018-01-23T00:11:46.497Z,1516666306.497 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak:MissionStart:NeedComms.CommsTimeout = 30.000000 min 2018-01-23T00:11:46.502Z,1516666306.502 [DriftOrDonutAtChlPeak:MissionStart:NeedComms:B.GoToSurface](DEBUG): Construct GoToSurface. 2018-01-23T00:11:46.513Z,1516666306.513 [MissionManager](INFO): Inserting Stack: Missions/Insert/NeedComms.xml 2018-01-23T00:11:46.561Z,1516666306.561 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:11:46.601Z,1516666306.601 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak:FindHighChlLocation:NeedComms.DiveInterval = 3.000000 h 2018-01-23T00:11:46.607Z,1516666306.607 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak:FindHighChlLocation:NeedComms.WaitForPitchUp = 10.000000 min 2018-01-23T00:11:46.609Z,1516666306.609 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak:FindHighChlLocation:NeedComms.SurfacePitch = 20.000000 arcdeg 2018-01-23T00:11:46.616Z,1516666306.616 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak:FindHighChlLocation:NeedComms.SurfaceDepthRate = nan m/s 2018-01-23T00:11:46.618Z,1516666306.618 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak:FindHighChlLocation:NeedComms.SurfaceSpeed = 1.000000 m/s 2018-01-23T00:11:46.623Z,1516666306.623 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak:FindHighChlLocation:NeedComms.GPSTimeout = 7.000000 min 2018-01-23T00:11:46.625Z,1516666306.625 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak:FindHighChlLocation:NeedComms.CommsTimeout = 30.000000 min 2018-01-23T00:11:46.631Z,1516666306.631 [DriftOrDonutAtChlPeak:FindHighChlLocation:NeedComms:B.GoToSurface](DEBUG): Construct GoToSurface. 2018-01-23T00:11:46.648Z,1516666306.648 [DriftOrDonutAtChlPeak:FindHighChlLocation:C.SetSpeed](DEBUG): Construct. 2018-01-23T00:11:46.689Z,1516666306.689 [DriftOrDonutAtChlPeak:FindHighChlLocation:F.DepthEnvelope](DEBUG): Construct DepthEnvelope. 2018-01-23T00:11:46.716Z,1516666306.716 [DriftOrDonutAtChlPeak:FindHighChlLocation:G.YoYo](DEBUG): Construct YoYo. 2018-01-23T00:11:46.722Z,1516666306.722 [DriftOrDonutAtChlPeak:FindHighChlLocation:H.Buoyancy](DEBUG): Construct Buoyancy. 2018-01-23T00:11:46.735Z,1516666306.735 [DriftOrDonutAtChlPeak:FindHighChlLocation:Lap:Wpt1:A.Waypoint](DEBUG): Construct Waypoint. 2018-01-23T00:11:46.770Z,1516666306.770 [DriftOrDonutAtChlPeak:FindHighChlLocation:Lap:Wpt2:A.Waypoint](DEBUG): Construct Waypoint. 2018-01-23T00:11:46.793Z,1516666306.793 [DriftOrDonutAtChlPeak:FindHighChlLocation:Lap:Wpt3:A.Waypoint](DEBUG): Construct Waypoint. 2018-01-23T00:11:46.816Z,1516666306.816 [DriftOrDonutAtChlPeak:FindHighChlLocation:Lap:Wpt4:A.Waypoint](DEBUG): Construct Waypoint. 2018-01-23T00:11:46.898Z,1516666306.898 [DriftOrDonutAtChlPeak:FindHighChlLocation:CylinderYoYoAroundSamplingLocation:CylinderIfNonNaNLatLon:CylinderWrapper:B.Circle](DEBUG): Construct. 2018-01-23T00:11:46.918Z,1516666306.918 [DriftOrDonutAtChlPeak:FindHighChlLocation:GoToCylinderCenter:ToCylinderCenter.Waypoint](DEBUG): Construct Waypoint. 2018-01-23T00:11:46.963Z,1516666306.963 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:11:47.004Z,1516666307.004 [DriftOrDonutAtChlPeak:ChlPeakHolding:GoDownInSpiralMode:A.Pitch](DEBUG): Construct. 2018-01-23T00:11:47.009Z,1516666307.009 [DriftOrDonutAtChlPeak:ChlPeakHolding:GoDownInSpiralMode:B.SetSpeed](DEBUG): Construct. 2018-01-23T00:11:47.024Z,1516666307.024 [DriftOrDonutAtChlPeak:ChlPeakHolding:GoDownInSpiralMode:C.Point](DEBUG): Construct. 2018-01-23T00:11:47.028Z,1516666307.028 [DriftOrDonutAtChlPeak:ChlPeakHolding:GoDownInSpiralMode:D.Buoyancy](DEBUG): Construct Buoyancy. 2018-01-23T00:11:47.056Z,1516666307.056 [DriftOrDonutAtChlPeak:ChlPeakHolding:GoDownInDriftMode:A.Pitch](DEBUG): Construct. 2018-01-23T00:11:47.060Z,1516666307.060 [DriftOrDonutAtChlPeak:ChlPeakHolding:GoDownInDriftMode:B.SetSpeed](DEBUG): Construct. 2018-01-23T00:11:47.075Z,1516666307.075 [DriftOrDonutAtChlPeak:ChlPeakHolding:GoDownInDriftMode:C.Point](DEBUG): Construct. 2018-01-23T00:11:47.081Z,1516666307.081 [DriftOrDonutAtChlPeak:ChlPeakHolding:GoUpInSpiralMode:A.Pitch](DEBUG): Construct. 2018-01-23T00:11:47.084Z,1516666307.084 [DriftOrDonutAtChlPeak:ChlPeakHolding:GoUpInSpiralMode:B.SetSpeed](DEBUG): Construct. 2018-01-23T00:11:47.092Z,1516666307.092 [DriftOrDonutAtChlPeak:ChlPeakHolding:GoUpInSpiralMode:C.Point](DEBUG): Construct. 2018-01-23T00:11:47.096Z,1516666307.096 [DriftOrDonutAtChlPeak:ChlPeakHolding:GoUpInSpiralMode:D.Buoyancy](DEBUG): Construct Buoyancy. 2018-01-23T00:11:47.100Z,1516666307.100 [DriftOrDonutAtChlPeak:ChlPeakHolding:GoUpInDriftMode:A.Pitch](DEBUG): Construct. 2018-01-23T00:11:47.104Z,1516666307.104 [DriftOrDonutAtChlPeak:ChlPeakHolding:GoUpInDriftMode:B.SetSpeed](DEBUG): Construct. 2018-01-23T00:11:47.107Z,1516666307.107 [DriftOrDonutAtChlPeak:ChlPeakHolding:GoUpInDriftMode:C.Point](DEBUG): Construct. 2018-01-23T00:11:47.114Z,1516666307.114 [DriftOrDonutAtChlPeak:ChlPeakHolding:HoldDepthInDonutMode:A.Pitch](DEBUG): Construct. 2018-01-23T00:11:47.118Z,1516666307.118 [DriftOrDonutAtChlPeak:ChlPeakHolding:HoldDepthInDonutMode:B.SetSpeed](DEBUG): Construct. 2018-01-23T00:11:47.120Z,1516666307.120 [DriftOrDonutAtChlPeak:ChlPeakHolding:HoldDepthInDonutMode:C.Point](DEBUG): Construct. 2018-01-23T00:11:47.125Z,1516666307.125 [DriftOrDonutAtChlPeak:ChlPeakHolding:HoldDepthInDonutMode:D.Buoyancy](DEBUG): Construct Buoyancy. 2018-01-23T00:11:47.130Z,1516666307.130 [DriftOrDonutAtChlPeak:ChlPeakHolding:HoldDepthInDriftMode:A.Pitch](DEBUG): Construct. 2018-01-23T00:11:47.134Z,1516666307.134 [DriftOrDonutAtChlPeak:ChlPeakHolding:HoldDepthInDriftMode:B.SetSpeed](DEBUG): Construct. 2018-01-23T00:11:47.137Z,1516666307.137 [DriftOrDonutAtChlPeak:ChlPeakHolding:HoldDepthInDriftMode:C.Point](DEBUG): Construct. 2018-01-23T00:11:47.221Z,1516666307.221 [DriftOrDonutAtChlPeak:TakeSamples:NoFiringForTooLong:C.Execute](DEBUG): Construct Execute. 2018-01-23T00:11:47.360Z,1516666307.360 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:11:47.761Z,1516666307.761 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:11:47.868Z,1516666307.868 [MissionManager](INFO): Inserting Stack: Missions/Insert/NeedComms.xml 2018-01-23T00:11:47.901Z,1516666307.901 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak:TakeSamples:ReportAtSurface:NeedComms.DiveInterval = 3.000000 h 2018-01-23T00:11:47.904Z,1516666307.904 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak:TakeSamples:ReportAtSurface:NeedComms.WaitForPitchUp = 10.000000 min 2018-01-23T00:11:47.906Z,1516666307.906 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak:TakeSamples:ReportAtSurface:NeedComms.SurfacePitch = 20.000000 arcdeg 2018-01-23T00:11:47.908Z,1516666307.908 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak:TakeSamples:ReportAtSurface:NeedComms.SurfaceDepthRate = nan m/s 2018-01-23T00:11:47.910Z,1516666307.910 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak:TakeSamples:ReportAtSurface:NeedComms.SurfaceSpeed = 1.000000 m/s 2018-01-23T00:11:47.912Z,1516666307.912 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak:TakeSamples:ReportAtSurface:NeedComms.GPSTimeout = 7.000000 min 2018-01-23T00:11:47.915Z,1516666307.915 [MissionManager](INFO): DefineArg DriftOrDonutAtChlPeak:TakeSamples:ReportAtSurface:NeedComms.CommsTimeout = 30.000000 min 2018-01-23T00:11:47.919Z,1516666307.919 [DriftOrDonutAtChlPeak:TakeSamples:ReportAtSurface:NeedComms:B.GoToSurface](DEBUG): Construct GoToSurface. 2018-01-23T00:11:47.942Z,1516666307.942 [DriftOrDonutAtChlPeak:MissionCompleted:B.Execute](DEBUG): Construct Execute. 2018-01-23T00:11:48.185Z,1516666308.185 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:11:48.268Z,1516666308.268 [MissionManager](DEBUG): Total number of ESP cartridges (Maximum 60. Set to a smaller number if not using all of them. Set to 0 to disable ESP sampling). 9 Maximum duration of mission 20 On search-for-chlmax yo-yo transects, how often to surface for commumications 60 If the vehicle does not receive an acoustic signal for more than this length of time, it will surface for communications. Set longer than MissionTimeout to effectively disable. 21 If no firing after more than MaxWaitNoFiring, terminate mission. 4 Maximum duration of cylinder yoyo. 60 Wait duration for the depth undulation to damp down. Initialized to 10 minutes. 10.0 Whether to search for the location of high chl. Initialized to false. Whether to yoyo on cylinder centered at the hi-chl location. Initialized to True. Vehicle speed when searching for the location of high chl. 1.0 Vehicle speed on vertical maneuver, and holding at chl-peak and sampling. 0 for drift mode (prop off); 1.0 for spiral/donut mode (prop on) 1.0 Vehicle spiraling speed. 1.0 Maximum depth for the entire mission. 50 Shallow depth bound for chl-peak detection. 4.5 Deep depth bound for chl-peak detection. 27 Minimum depth while performing the YoYo behavior on cylinder centered at the hi-chl location. 4.5 Maximum depth while performing the YoYo behavior on cylinder centered at the hi-chl location. 27 Radius of cylinder centered at the hi-chl location. 200 Maximum number of circles on cylinder. 1 Number of times the vehicle should try to cycle through waypoints.. 1 Latitude of waypoint 1. If nan, waypoint is skipped. If FindHighChlLocation is True, the search-for-hichl distance needs to be at least 4 yoyo profiles. NaN Longitude of waypoint 1. If nan, waypoint is skipped. If FindHighChlLocation is True, the search-for-hichl distance needs to be at least 4 yoyo profiles. NaN Latitude of waypoint 2. If nan, waypoint is skipped. NaN Longitude of waypoint 2. If nan, waypoint is skipped. NaN Latitude of waypoint 3. If nan, waypoint is skipped. NaN Longitude of waypoint 3. If nan, waypoint is skipped. NaN Latitude of waypoint 4. If nan, waypoint is skipped. NaN Longitude of waypoint 4. If nan, waypoint is skipped. NaN Sample 1. Vertical distance (positive: above; negative: below) the peak-chl depth for taking comparison samples. NaN Sample 2. NaN Sample 3. NaN Sample 4. NaN Sample 5. NaN Sample 6. NaN Sample 7. NaN Sample 8. NaN Sample 9. NaN Sample 10. NaN Sample 11. NaN Sample 12. NaN Sample 13. NaN Sample 14. NaN Sample 15. NaN Sample 16. NaN Sample 17. NaN Sample 18. NaN Sample 19. NaN Sample 20. NaN Sample 1. Pre-designated depth. If NaN, will use vertical distance from chl-peak depth. NaN Sample 2. NaN Sample 3. NaN Sample 4. NaN Sample 5. NaN Sample 6. NaN Sample 7. NaN Sample 8. NaN Sample 9. NaN Sample 10. NaN Sample 11. NaN Sample 12. NaN Sample 13. NaN Sample 14. NaN Sample 15. NaN Sample 16. NaN Sample 17. NaN Sample 18. NaN Sample 19. NaN Sample 20. NaN Sample 1. Before sampling, maneuver vertically to reacquire chl peak (initialized to false). Sample 2. Sample 3. Sample 4. Sample 5. Sample 6. Sample 7. Sample 8. Sample 9. Sample 10. Sample 11. Sample 12. Sample 13. Sample 14. Sample 15. Sample 16. Sample 17. Sample 18. Sample 19. Sample 20. Sample 1. When sampling is completed, go to surface to report (initialized to false). Sample 2. Sample 3. Sample 4. Sample 5. Sample 6. Sample 7. Sample 8. Sample 9. Sample 10. Sample 11. Sample 12. Sample 13. Sample 14. Sample 15. Sample 16. Sample 17. Sample 18. Sample 19. Sample 20. Go-up depth rate (Negative depth rate means going up). -0.04 Go-down depth rate (Positive depth rate means going down). 0.2 Minimum altitude while performing the YoYo behavior (for bottom-terminated YoYos). 9 Minimum altitude for the entire mission. 7 Minimum offshore distance for the entire mission. 2 Shallow bound for vertical chl-peak finding maneuver = ShallowBoundChl - VertMargin. Deep bound for vertical chl-peak finding maneuver = DeepBoundChl + VertMargin. 3 Vertical perturbation (going up or down) for reacquiring the peak. 6.0 Depth error allowed for being considered at/near the target depth. 0.1 Peak chl on a profile is registered at the beginning of the next yoyo profile. In this mission, the peak chl on the descending profile is saved when the vehicle has turned onto the next yoyo profile (ascending profile) and is at least "RiseFromDeepTurningPoint" away from the turning depth. 1.5 If this distance away from the circle, drive straight towards (or away from the center). Otherwise, try to reduce distance from the ideal circle. 100 If true, vehicle turns to the left around the center point. If false, vehicle turns to the right. Used to relax waypoint cross-track error constant that is adjusted for docking. (You can override this setting by passing an argument.) 0.010 Vehicle up pitch while performing the YoYo behavior. 20 Vehicle down pitch while performing the YoYo behavior. -20 Rudder angle to use while performing the donut cast. 13 Length of horizontal sliding window. Picks the highest yoyo-wise chl peak (after low-pass filtering by a filter of length FilterWidthHorizontal) within this window. Ignore older highs because ocean is changing. 100 Low-pass window length (based on depth sensor sampling interval 0.4 second) for low-pass filtering. 40 Buoyancy bladder position while performing the YoYo behavior. Defaults to buoyancyNeutral setting in the Config/Control.cfg file. Set to NaN cc for active buoyancy Static setting for mass during the mission. Set to NaN mm for active mass position Minimum depth while performing the YoYo behavior. Program will set to ShallowBoundChl, and then CylinderYoYoMinDep. Initialized to 4.5 m. 4.5 Maximum depth while performing the YoYo behavior. Program will set to DeepBoundChl, and then CylinderYoYoMaxDep. Initialized 27 m. 27 Depth for sampling. Initialized to 10 m. 10.0 Depth if pre-designated. Initialized to NaN. NaN Vertical distance (positive: above; negative: below) the peak-chl depth for taking comparison samples. Initialized to NaN. NaN When sampling is completed, go to surface to report. Initialized to false. Have completed surface reporting. Initialized to False. For next sample. When sampling is completed, go to surface to report. Initialized to false. Before sampling, maneuver vertically to reacquire chl peak. Initialized to false. Sample options (VertDistance, ReportAtSurface, ReacquirePeak) already set. Initialized to false. Sampling completed. Initialized to false. Mission stopped because of no firing for too long. Initialized to false. 0.0 0.0 Start vertical chl peak fiding and sampling (initialized to false). Surfacing for communications (set to true when going down. Initialized to false). Flag of target depth having been set. Initialized to false. Go-up flag (set to true when going up. Initialized to false). Go-down flag (set to true when going down. Initialized to false). Flag of diving from surface (Initialized to true). Flag of peak-chl depth having been set (set to true when the chl-peak depth has been set. Initialized to false). Enables setting peak-chl depth. Initialized to true. Flag of first dive to find the peak-chl depth (true only for the first dive; false afterwards). Flag of water sampling in process (initialized to false). Flag of sample fired (initialized to false). Peak-chl depth detected on a dive, and set for chl-peak holding. Initialized to 10 meters. 10.0 Peak-chl value detected on a dive, and set for chl-peak holding. 0.0 Depth held for triggering sampling. Initialized to 10 meters. 10.0 Flag of logging "GoUp" in syslog (initialized to false). Flag of logging "GoDown" in syslog (initialized to false). Flag of logging "HoldDepth" in syslog (initialized to false). Elapsed time from last time-fix to StartVerticalManeuver. NaN Elapsed time from last time-fix to now. NaN Elapsed time from last time-fix to last firing. NaN Latitude of cylinder center. NaN Longitude of cylinder center. NaN Count of water samples (initilized to 1). 1 Another altitude envelope for the YoYo behavior. This envelope should fall within the limits of the standard safety envelopes in Insert/StandardEnvelopes.xml in order to avoid commanding high pitch angles for bottom-terminated YoYos. Set FlagGoUp to true to reacquire chl peak. DepthLogged, ChlLogged, PeakChlDepthSet, PeakChlSet = , , , . Set cylinder center to Waypoint1 ,. Set cylinder center to hi-chl location ,,. Yoyo profile on a cylinder around sampling location ,, at radius = Go to cylinder center (i.e., sampling location): , 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 Hold depth. DepthLogged, ChlLogged, PeakChlDepthSet, PeakChlSet = , , , . Go down from Go up from Set PeakChlDepthSet. DepthLogged, ChlLogged, PeakChlDepthSet, PeakChlSet = , , , 1 2 No firing for too long. Stopping mission. FromLastTimeFixToNow, FromLastTimeFixToLastFiring = , stop 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 Taking ESP sample No. at target depth . ESP sample No. completed. Surfacing to report ESP results to shore. 1 1 Completed sampling. Stopping mission. stop 1 2018-01-23T00:11:48.270Z,1516666308.270 [CommandLine](IMPORTANT): Loaded ./Missions/Science/chlpeak_sampling_InAboveBelow.xml 2018-01-23T00:11:48.287Z,1516666308.287 [MissionManager](IMPORTANT): Started mission Default 2018-01-23T00:11:48.287Z,1516666308.287 [Default] Running Loop=1 2018-01-23T00:11:48.287Z,1516666308.287 [Default](DEBUG): Aggregate::initialize Default 2018-01-23T00:11:48.288Z,1516666308.288 [Default:B.GoToSurface] Running Loop=1 2018-01-23T00:11:48.288Z,1516666308.288 [Default:B.GoToSurface](DEBUG): Initialize GoToSurfaceComponent. 2018-01-23T00:11:48.288Z,1516666308.288 [Default:B.GoToSurface](DEBUG): No depth rate setting specified. Using default value of nan m/s. 2018-01-23T00:11:48.288Z,1516666308.288 [Default:B.GoToSurface](DEBUG): No pitch setting specified. Using default value of nan degrees. 2018-01-23T00:11:48.289Z,1516666308.289 [Default:B.GoToSurface](DEBUG): No speed setting specified. Using default value of 1.000000 m/s. 2018-01-23T00:11:48.289Z,1516666308.289 [Default:B.GoToSurface](DEBUG): No pitch timeout specified. Using default value of 20.000000 seconds. 2018-01-23T00:11:48.289Z,1516666308.289 [Default:B.GoToSurface](DEBUG): No surface timeout specified. Using default value of 1000.000000 seconds. 2018-01-23T00:11:48.289Z,1516666308.289 [Default:A.Wait] Running Loop=1 2018-01-23T00:11:48.289Z,1516666308.289 [Default:A.Wait](DEBUG): Initialize Wait Component. 2018-01-23T00:11:48.561Z,1516666308.561 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:11:48.960Z,1516666308.960 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:11:57.761Z,1516666317.761 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:11:58.163Z,1516666318.163 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:11:58.569Z,1516666318.569 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:11:58.963Z,1516666318.963 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:11:59.363Z,1516666319.363 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:11:59.768Z,1516666319.768 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:12:00.156Z,1516666320.156 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:12:00.398Z,1516666320.398 [CommandLine](IMPORTANT): got command set DriftOrDonutAtChlPeak.NumESPSamplers 1.000000 count 2018-01-23T00:12:00.399Z,1516666320.399 [CommandLine](IMPORTANT): got command set DriftOrDonutAtChlPeak.NeedCommsTimeInTransect 120.000000 minute 2018-01-23T00:12:00.400Z,1516666320.400 [CommandLine](IMPORTANT): got command set DriftOrDonutAtChlPeak.AcousticTrackingTimeout 5.000000 minute 2018-01-23T00:12:00.560Z,1516666320.560 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:12:00.960Z,1516666320.960 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:12:01.364Z,1516666321.364 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:12:01.431Z,1516666321.431 [Default:A.Wait](INFO): Done Waiting. 2018-01-23T00:12:01.431Z,1516666321.431 [Default:A.Wait] Stopped 2018-01-23T00:12:01.431Z,1516666321.431 [Default:A.Wait](DEBUG): Uninitialize Wait Component. 2018-01-23T00:12:01.756Z,1516666321.756 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:12:01.805Z,1516666321.805 [Default:CheckIn] Running Loop=1 2018-01-23T00:12:01.805Z,1516666321.805 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-01-23T00:12:01.805Z,1516666321.805 [Default:CheckIn:Read_GPS] Running Loop=1 2018-01-23T00:12:02.160Z,1516666322.160 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:12:02.560Z,1516666322.560 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:12:02.961Z,1516666322.961 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:12:03.394Z,1516666323.394 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:12:03.771Z,1516666323.771 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:12:04.172Z,1516666324.172 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:12:04.561Z,1516666324.561 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:12:04.989Z,1516666324.989 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:12:05.365Z,1516666325.365 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:12:05.767Z,1516666325.767 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:12:06.175Z,1516666326.175 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:12:06.577Z,1516666326.577 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:12:06.991Z,1516666326.991 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:12:07.360Z,1516666327.360 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:12:07.761Z,1516666327.761 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:12:08.166Z,1516666328.166 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:12:08.557Z,1516666328.557 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:12:08.956Z,1516666328.956 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:12:09.379Z,1516666329.379 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:12:09.556Z,1516666329.556 [CommandLine](IMPORTANT): got command set DriftOrDonutAtChlPeak.SpeedFindHighChlLatLon 0.000000 meter_per_second 2018-01-23T00:12:09.557Z,1516666329.557 [CommandLine](IMPORTANT): got command set DriftOrDonutAtChlPeak.SpeedChlPeakHoldingSampling 0.000000 meter_per_second 2018-01-23T00:12:09.558Z,1516666329.558 [CommandLine](IMPORTANT): got command set DriftOrDonutAtChlPeak.SpeedSpiral 0.000000 meter_per_second 2018-01-23T00:12:09.786Z,1516666329.786 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:12:10.167Z,1516666330.167 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:12:10.577Z,1516666330.577 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:12:10.969Z,1516666330.969 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:12:11.357Z,1516666331.357 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:12:11.746Z,1516666331.746 [CommandLine](IMPORTANT): got command set DriftOrDonutAtChlPeak.VertDist1 0.000000 meter 2018-01-23T00:12:11.750Z,1516666331.750 [CommandLine](IMPORTANT): got command run 2018-01-23T00:12:11.759Z,1516666331.759 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:12:11.787Z,1516666331.787 [Default] Stopped 2018-01-23T00:12:11.787Z,1516666331.787 [Default](DEBUG): Aggregate::uninitialize Default 2018-01-23T00:12:11.788Z,1516666331.788 [Default:B.GoToSurface] Stopped 2018-01-23T00:12:11.788Z,1516666331.788 [Default:B.GoToSurface](DEBUG): Uninitialize GoToSurfaceComponent. 2018-01-23T00:12:11.788Z,1516666331.788 [Default:CheckIn] Stopped 2018-01-23T00:12:11.788Z,1516666331.788 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-01-23T00:12:11.788Z,1516666331.788 [Default:CheckIn:Read_GPS] Stopped 2018-01-23T00:12:11.788Z,1516666331.788 [MissionManager](IMPORTANT): Started mission DriftOrDonutAtChlPeak 2018-01-23T00:12:11.788Z,1516666331.788 [DriftOrDonutAtChlPeak] Running Loop=1 2018-01-23T00:12:11.788Z,1516666331.788 [DriftOrDonutAtChlPeak](DEBUG): Aggregate::initialize DriftOrDonutAtChlPeak 2018-01-23T00:12:11.788Z,1516666331.788 [DriftOrDonutAtChlPeak:StandardEnvelopes] Running Loop=1 2018-01-23T00:12:11.789Z,1516666331.789 [DriftOrDonutAtChlPeak:StandardEnvelopes](DEBUG): Aggregate::initialize DriftOrDonutAtChlPeak:StandardEnvelopes 2018-01-23T00:12:11.789Z,1516666331.789 [DriftOrDonutAtChlPeak:StandardEnvelopes:A.AltitudeEnvelope] Running Loop=1 2018-01-23T00:12:11.789Z,1516666331.789 [DriftOrDonutAtChlPeak:StandardEnvelopes:A.AltitudeEnvelope](DEBUG): Initialize AltitudeEnvelopeComponent. 2018-01-23T00:12:11.789Z,1516666331.789 [DriftOrDonutAtChlPeak:StandardEnvelopes:B.DepthEnvelope] Running Loop=1 2018-01-23T00:12:11.789Z,1516666331.789 [DriftOrDonutAtChlPeak:StandardEnvelopes:B.DepthEnvelope](DEBUG): Initialize DepthEnvelopeComponent. 2018-01-23T00:12:11.789Z,1516666331.789 [DriftOrDonutAtChlPeak:StandardEnvelopes:C.OffshoreEnvelope] Running Loop=1 2018-01-23T00:12:11.789Z,1516666331.789 [DriftOrDonutAtChlPeak:StandardEnvelopes:C.OffshoreEnvelope](DEBUG): Initialize OffshoreEnvelopeComponent. 2018-01-23T00:12:11.789Z,1516666331.789 [DriftOrDonutAtChlPeak:AbortDrift] Running Loop=1 2018-01-23T00:12:11.789Z,1516666331.789 [DriftOrDonutAtChlPeak:AbortDrift](DEBUG): Aggregate::initialize DriftOrDonutAtChlPeak:AbortDrift 2018-01-23T00:12:11.789Z,1516666331.789 [DriftOrDonutAtChlPeak:AbortDrift:A] Running Loop=1 2018-01-23T00:12:11.790Z,1516666331.790 [DriftOrDonutAtChlPeak:H.Pitch] Running Loop=1 2018-01-23T00:12:11.790Z,1516666331.790 [DriftOrDonutAtChlPeak:H.Pitch](DEBUG): Initialize. 2018-01-23T00:12:11.790Z,1516666331.790 [DriftOrDonutAtChlPeak:Science] Running Loop=1 2018-01-23T00:12:11.790Z,1516666331.790 [DriftOrDonutAtChlPeak:Science](DEBUG): Aggregate::initialize DriftOrDonutAtChlPeak:Science 2018-01-23T00:12:11.790Z,1516666331.790 [DriftOrDonutAtChlPeak:Science:A] Running Loop=1 2018-01-23T00:12:11.790Z,1516666331.790 [DriftOrDonutAtChlPeak:Science:B] Running Loop=1 2018-01-23T00:12:11.790Z,1516666331.790 [DriftOrDonutAtChlPeak:Science:C] Running Loop=1 2018-01-23T00:12:11.790Z,1516666331.790 [DriftOrDonutAtChlPeak:Science:D] Running Loop=1 2018-01-23T00:12:11.790Z,1516666331.790 [DriftOrDonutAtChlPeak:Science:E] Running Loop=1 2018-01-23T00:12:11.790Z,1516666331.790 [DriftOrDonutAtChlPeak:Science:F] Running Loop=1 2018-01-23T00:12:11.791Z,1516666331.791 [DriftOrDonutAtChlPeak:Science:G] Running Loop=1 2018-01-23T00:12:11.791Z,1516666331.791 [DriftOrDonutAtChlPeak:Science:H] Running Loop=1 2018-01-23T00:12:11.791Z,1516666331.791 [DriftOrDonutAtChlPeak:Science:PeakDetectChl] Running Loop=1 2018-01-23T00:12:11.791Z,1516666331.791 [DriftOrDonutAtChlPeak:Science:PeakDetectChl](DEBUG): Aggregate::initialize DriftOrDonutAtChlPeak:Science:PeakDetectChl 2018-01-23T00:12:11.791Z,1516666331.791 [DriftOrDonutAtChlPeak:Science:PeakDetectChl:A.PeakDetectVsDepth] Running Loop=1 2018-01-23T00:12:11.791Z,1516666331.791 [DriftOrDonutAtChlPeak:Science:PeakDetectChl:A.PeakDetectVsDepth](DEBUG): Initialize. 2018-01-23T00:12:11.792Z,1516666331.792 [DriftOrDonutAtChlPeak:Science:HighestChlPeakReport] Running Loop=1 2018-01-23T00:12:11.792Z,1516666331.792 [DriftOrDonutAtChlPeak:Science:HighestChlPeakReport](DEBUG): Aggregate::initialize DriftOrDonutAtChlPeak:Science:HighestChlPeakReport 2018-01-23T00:12:11.792Z,1516666331.792 [DriftOrDonutAtChlPeak:Science:HighestChlPeakReport:A.PeakDetectHorizontal] Running Loop=1 2018-01-23T00:12:11.792Z,1516666331.792 [DriftOrDonutAtChlPeak:Science:HighestChlPeakReport:A.PeakDetectHorizontal](INFO): Initialize. 2018-01-23T00:12:11.793Z,1516666331.793 [DriftOrDonutAtChlPeak:Science:PeakDetectNO3] Running Loop=1 2018-01-23T00:12:11.793Z,1516666331.793 [DriftOrDonutAtChlPeak:Science:PeakDetectNO3](DEBUG): Aggregate::initialize DriftOrDonutAtChlPeak:Science:PeakDetectNO3 2018-01-23T00:12:11.793Z,1516666331.793 [DriftOrDonutAtChlPeak:Science:PeakDetectNO3:A.PeakDetectVsDepth] Running Loop=1 2018-01-23T00:12:11.793Z,1516666331.793 [DriftOrDonutAtChlPeak:Science:PeakDetectNO3:A.PeakDetectVsDepth](DEBUG): Initialize. 2018-01-23T00:12:11.794Z,1516666331.794 [DriftOrDonutAtChlPeak:Science:PeakDetectOil] Running Loop=1 2018-01-23T00:12:11.794Z,1516666331.794 [DriftOrDonutAtChlPeak:Science:PeakDetectOil](DEBUG): Aggregate::initialize DriftOrDonutAtChlPeak:Science:PeakDetectOil 2018-01-23T00:12:11.794Z,1516666331.794 [DriftOrDonutAtChlPeak:Science:PeakDetectOil:A.PeakDetectVsDepth] Running Loop=1 2018-01-23T00:12:11.794Z,1516666331.794 [DriftOrDonutAtChlPeak:Science:PeakDetectOil:A.PeakDetectVsDepth](DEBUG): Initialize. 2018-01-23T00:12:11.795Z,1516666331.795 [DriftOrDonutAtChlPeak:J.AltitudeEnvelope] Running Loop=1 2018-01-23T00:12:11.795Z,1516666331.795 [DriftOrDonutAtChlPeak:J.AltitudeEnvelope](DEBUG): Initialize AltitudeEnvelopeComponent. 2018-01-23T00:12:11.795Z,1516666331.795 [DriftOrDonutAtChlPeak:TakeSamples] Running Loop=1 2018-01-23T00:12:11.796Z,1516666331.796 [DriftOrDonutAtChlPeak:TakeSamples](DEBUG): Aggregate::initialize DriftOrDonutAtChlPeak:TakeSamples 2018-01-23T00:12:11.796Z,1516666331.796 [DriftOrDonutAtChlPeak:B] Running Loop=1 2018-01-23T00:12:11.796Z,1516666331.796 [DriftOrDonutAtChlPeak:TakeSamples] Running Loop=1 2018-01-23T00:12:11.801Z,1516666331.801 [DriftOrDonutAtChlPeak:TakeSamples:SetOptionsOfSample1] Running Loop=1 2018-01-23T00:12:11.801Z,1516666331.801 [DriftOrDonutAtChlPeak:TakeSamples:SetOptionsOfSample1](DEBUG): Aggregate::initialize DriftOrDonutAtChlPeak:TakeSamples:SetOptionsOfSample1 2018-01-23T00:12:11.801Z,1516666331.801 [DriftOrDonutAtChlPeak:TakeSamples:SetOptionsOfSample1:A] Running Loop=1 2018-01-23T00:12:11.802Z,1516666331.802 [DriftOrDonutAtChlPeak:TakeSamples:SetOptionsOfSample1:A] Stopped 2018-01-23T00:12:11.802Z,1516666331.802 [DriftOrDonutAtChlPeak:TakeSamples:SetOptionsOfSample1:B] Running Loop=1 2018-01-23T00:12:11.802Z,1516666331.802 [DriftOrDonutAtChlPeak:J.AltitudeEnvelope] Running Loop=1 2018-01-23T00:12:11.803Z,1516666331.803 [DriftOrDonutAtChlPeak:Science] Running Loop=1 2018-01-23T00:12:11.809Z,1516666331.809 [DriftOrDonutAtChlPeak:Science:PeakDetectOil] Stopped 2018-01-23T00:12:11.809Z,1516666331.809 [DriftOrDonutAtChlPeak:Science:PeakDetectOil](DEBUG): Aggregate::uninitialize DriftOrDonutAtChlPeak:Science:PeakDetectOil 2018-01-23T00:12:11.809Z,1516666331.809 [DriftOrDonutAtChlPeak:Science:PeakDetectOil:A.PeakDetectVsDepth] Stopped 2018-01-23T00:12:11.809Z,1516666331.809 [DriftOrDonutAtChlPeak:Science:PeakDetectOil:A.PeakDetectVsDepth](DEBUG): Uninitialize. 2018-01-23T00:12:11.809Z,1516666331.809 [DriftOrDonutAtChlPeak:Science:PeakDetectNO3] Stopped 2018-01-23T00:12:11.810Z,1516666331.810 [DriftOrDonutAtChlPeak:Science:PeakDetectNO3](DEBUG): Aggregate::uninitialize DriftOrDonutAtChlPeak:Science:PeakDetectNO3 2018-01-23T00:12:11.810Z,1516666331.810 [DriftOrDonutAtChlPeak:Science:PeakDetectNO3:A.PeakDetectVsDepth] Stopped 2018-01-23T00:12:11.810Z,1516666331.810 [DriftOrDonutAtChlPeak:Science:PeakDetectNO3:A.PeakDetectVsDepth](DEBUG): Uninitialize. 2018-01-23T00:12:11.810Z,1516666331.810 [DriftOrDonutAtChlPeak:Science:HighestChlPeakReport] Running Loop=1 2018-01-23T00:12:11.811Z,1516666331.811 [DriftOrDonutAtChlPeak:Science:PeakDetectChl] Running Loop=1 2018-01-23T00:12:11.812Z,1516666331.812 [DriftOrDonutAtChlPeak:Science:H] Running Loop=1 2018-01-23T00:12:11.812Z,1516666331.812 [DriftOrDonutAtChlPeak:Science:H](DEBUG): Initialize ReadDataComponent to sense mass_concentration_of_petroleum_hydrocarbons_in_sea_water 2018-01-23T00:12:11.813Z,1516666331.813 [DriftOrDonutAtChlPeak:Science:G] Running Loop=1 2018-01-23T00:12:11.813Z,1516666331.813 [DriftOrDonutAtChlPeak:Science:G](DEBUG): Initialize ReadDataComponent to sense mass_concentration_of_chlorophyll_in_sea_water 2018-01-23T00:12:11.814Z,1516666331.814 [DriftOrDonutAtChlPeak:Science:F] Stopped 2018-01-23T00:12:11.814Z,1516666331.814 [DriftOrDonutAtChlPeak:Science:E] Stopped 2018-01-23T00:12:11.814Z,1516666331.814 [DriftOrDonutAtChlPeak:Science:D] Running Loop=1 2018-01-23T00:12:11.815Z,1516666331.815 [DriftOrDonutAtChlPeak:Science:D](DEBUG): Initialize ReadDataComponent to sense CTD_Seabird.sea_water_temperature 2018-01-23T00:12:11.815Z,1516666331.815 [DriftOrDonutAtChlPeak:Science:D](DEBUG): Initialize ReadDataComponent to sense CTD_Seabird.sea_water_salinity 2018-01-23T00:12:11.816Z,1516666331.816 [DriftOrDonutAtChlPeak:Science:C] Running Loop=1 2018-01-23T00:12:11.817Z,1516666331.817 [DriftOrDonutAtChlPeak:Science:C](DEBUG): Initialize ReadDataComponent to sense sea_water_temperature 2018-01-23T00:12:11.817Z,1516666331.817 [DriftOrDonutAtChlPeak:Science:C](DEBUG): Initialize ReadDataComponent to sense sea_water_salinity 2018-01-23T00:12:11.818Z,1516666331.818 [DriftOrDonutAtChlPeak:Science:B] Stopped 2018-01-23T00:12:11.818Z,1516666331.818 [DriftOrDonutAtChlPeak:Science:A] Running Loop=1 2018-01-23T00:12:11.818Z,1516666331.818 [DriftOrDonutAtChlPeak:Science:A](DEBUG): Initialize ReadDataComponent to sense mass_concentration_of_oxygen_in_sea_water 2018-01-23T00:12:11.819Z,1516666331.819 [DriftOrDonutAtChlPeak:H.Pitch] Running Loop=1 2018-01-23T00:12:11.820Z,1516666331.820 [DriftOrDonutAtChlPeak:AbortDrift] Running Loop=1 2018-01-23T00:12:11.821Z,1516666331.821 [DriftOrDonutAtChlPeak:AbortDrift:A](INFO): Insert acoustic timeout set to 0.083333 h . 2018-01-23T00:12:11.822Z,1516666331.822 [DriftOrDonutAtChlPeak:AbortDrift:A] Stopped 2018-01-23T00:12:11.822Z,1516666331.822 [DriftOrDonutAtChlPeak:AbortDrift:B.AbortDrift] Running Loop=1 2018-01-23T00:12:11.822Z,1516666331.822 [DriftOrDonutAtChlPeak:AbortDrift:B.AbortDrift](INFO): Initializing AbortDrift. 2018-01-23T00:12:11.823Z,1516666331.823 [DriftOrDonutAtChlPeak:AbortDrift:B.AbortDrift](IMPORTANT): Acoustic timeout set to: 0.08 hours. 2018-01-23T00:12:11.824Z,1516666331.824 [DriftOrDonutAtChlPeak:B] Stopped 2018-01-23T00:12:11.824Z,1516666331.824 [DriftOrDonutAtChlPeak:C] Running Loop=1 2018-01-23T00:12:11.824Z,1516666331.824 [DriftOrDonutAtChlPeak:StandardEnvelopes] Running Loop=1 2018-01-23T00:12:11.824Z,1516666331.824 [DriftOrDonutAtChlPeak:StandardEnvelopes:C.OffshoreEnvelope] Running Loop=1 2018-01-23T00:12:11.834Z,1516666331.834 [DriftOrDonutAtChlPeak:StandardEnvelopes:B.DepthEnvelope] Running Loop=1 2018-01-23T00:12:11.835Z,1516666331.835 [DriftOrDonutAtChlPeak:StandardEnvelopes:A.AltitudeEnvelope] Running Loop=1 2018-01-23T00:12:11.843Z,1516666331.843 [WetLabsBB2FL](INFO): Opening uart, block timeout 10ths=4 2018-01-23T00:12:11.843Z,1516666331.843 [WetLabsBB2FL](INFO): Powering up 2018-01-23T00:12:12.035Z,1516666332.035 [CTD_Seabird](INFO): Initializing 2018-01-23T00:12:12.036Z,1516666332.036 [CTD_Seabird](INFO): Checking LCM 2018-01-23T00:12:12.036Z,1516666332.036 [CTD_Seabird](INFO): LCM OK 2018-01-23T00:12:12.036Z,1516666332.036 [CTD_Seabird](INFO): Powering up 2018-01-23T00:12:12.175Z,1516666332.175 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:12:12.202Z,1516666332.202 [DriftOrDonutAtChlPeak:TakeSamples:SetOptionsOfSample1:B] Stopped 2018-01-23T00:12:12.202Z,1516666332.202 [DriftOrDonutAtChlPeak:TakeSamples:SetOptionsOfSample1:C] Running Loop=1 2018-01-23T00:12:12.206Z,1516666332.206 [DriftOrDonutAtChlPeak:AbortDrift:B.AbortDrift](INFO): Received valid gps time fix: 1516665856.00. Resetting abort timer. 2018-01-23T00:12:12.206Z,1516666332.206 [DriftOrDonutAtChlPeak:AbortDrift:B.AbortDrift](INFO): Received valid acoustic ping at time: 1516666368.00. Resetting abort timer. 2018-01-23T00:12:12.208Z,1516666332.208 [DriftOrDonutAtChlPeak:C] Stopped 2018-01-23T00:12:12.208Z,1516666332.208 [DriftOrDonutAtChlPeak:D] Running Loop=1 2018-01-23T00:12:12.567Z,1516666332.567 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:12:12.594Z,1516666332.594 [DriftOrDonutAtChlPeak:TakeSamples:SetOptionsOfSample1:C] Stopped 2018-01-23T00:12:12.594Z,1516666332.594 [DriftOrDonutAtChlPeak:TakeSamples:SetOptionsOfSample1:D] Running Loop=1 2018-01-23T00:12:12.599Z,1516666332.599 [DriftOrDonutAtChlPeak:D] Stopped 2018-01-23T00:12:12.599Z,1516666332.599 [DriftOrDonutAtChlPeak:G] Running Loop=1 2018-01-23T00:12:12.797Z,1516666332.797 [CommandLine](IMPORTANT): Running 2018-01-23T00:12:12.988Z,1516666332.988 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:12:13.035Z,1516666333.035 [DriftOrDonutAtChlPeak:TakeSamples:SetOptionsOfSample1:D] Stopped 2018-01-23T00:12:13.035Z,1516666333.035 [DriftOrDonutAtChlPeak:TakeSamples:SetOptionsOfSample1:E] Running Loop=1 2018-01-23T00:12:13.044Z,1516666333.044 [DriftOrDonutAtChlPeak:G] Stopped 2018-01-23T00:12:13.044Z,1516666333.044 [DriftOrDonutAtChlPeak:MissionStart] Running Loop=1 2018-01-23T00:12:13.044Z,1516666333.044 [DriftOrDonutAtChlPeak:MissionStart](DEBUG): Aggregate::initialize DriftOrDonutAtChlPeak:MissionStart 2018-01-23T00:12:13.044Z,1516666333.044 [DriftOrDonutAtChlPeak:MissionStart:MissionStartComms] Running Loop=1 2018-01-23T00:12:13.044Z,1516666333.044 [DriftOrDonutAtChlPeak:MissionStart:MissionStartComms](DEBUG): Aggregate::initialize DriftOrDonutAtChlPeak:MissionStart:MissionStartComms 2018-01-23T00:12:13.378Z,1516666333.378 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:12:13.422Z,1516666333.422 [DriftOrDonutAtChlPeak:TakeSamples:SetOptionsOfSample1:E] Stopped 2018-01-23T00:12:13.427Z,1516666333.427 [DriftOrDonutAtChlPeak:TakeSamples:SetOptionsOfSample1](INFO): Completed DriftOrDonutAtChlPeak:TakeSamples:SetOptionsOfSample1 2018-01-23T00:12:13.427Z,1516666333.427 [DriftOrDonutAtChlPeak:TakeSamples:SetOptionsOfSample1] Stopped 2018-01-23T00:12:13.427Z,1516666333.427 [DriftOrDonutAtChlPeak:TakeSamples:SetOptionsOfSample1](DEBUG): Aggregate::uninitialize DriftOrDonutAtChlPeak:TakeSamples:SetOptionsOfSample1 2018-01-23T00:12:13.427Z,1516666333.427 [DriftOrDonutAtChlPeak:MissionStart:NeedComms] Running Loop=1 2018-01-23T00:12:13.427Z,1516666333.427 [DriftOrDonutAtChlPeak:MissionStart:NeedComms](DEBUG): Aggregate::initialize DriftOrDonutAtChlPeak:MissionStart:NeedComms 2018-01-23T00:12:13.427Z,1516666333.427 [DriftOrDonutAtChlPeak:MissionStart:NeedComms:B.GoToSurface] Running Loop=1 2018-01-23T00:12:13.427Z,1516666333.427 [DriftOrDonutAtChlPeak:MissionStart:NeedComms:B.GoToSurface](DEBUG): Initialize GoToSurfaceComponent. 2018-01-23T00:12:13.428Z,1516666333.428 [DriftOrDonutAtChlPeak:MissionStart:NeedComms:B.GoToSurface](INFO): Received depth rate setting nan m/s. 2018-01-23T00:12:13.428Z,1516666333.428 [DriftOrDonutAtChlPeak:MissionStart:NeedComms:B.GoToSurface](INFO): Received pitch setting 19.999999 degrees. 2018-01-23T00:12:13.428Z,1516666333.428 [DriftOrDonutAtChlPeak:MissionStart:NeedComms:B.GoToSurface](INFO): Received speed setting 1.000000 m/s. 2018-01-23T00:12:13.429Z,1516666333.429 [DriftOrDonutAtChlPeak:MissionStart:NeedComms:B.GoToSurface](DEBUG): No pitch timeout specified. Using default value of 20.000000 seconds. 2018-01-23T00:12:13.429Z,1516666333.429 [DriftOrDonutAtChlPeak:MissionStart:NeedComms:B.GoToSurface](DEBUG): No surface timeout specified. Using default value of 1000.000000 seconds. 2018-01-23T00:12:13.430Z,1516666333.430 [DriftOrDonutAtChlPeak:MissionStart:NeedComms:A] Running Loop=1 2018-01-23T00:12:13.436Z,1516666333.436 [DriftOrDonutAtChlPeak:MissionStart:NeedComms:A](INFO): last time_fix was: 1516665856.000000 second since 1970/01/01T00:00:00Z 2018-01-23T00:12:13.436Z,1516666333.436 [DriftOrDonutAtChlPeak:MissionStart:NeedComms:A] Stopped 2018-01-23T00:12:13.769Z,1516666333.769 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:12:13.833Z,1516666333.833 [DriftOrDonutAtChlPeak:MissionStart:NeedComms:C] Running Loop=1 2018-01-23T00:12:14.163Z,1516666334.163 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:12:14.227Z,1516666334.227 [DriftOrDonutAtChlPeak:MissionStart:NeedComms:C](DEBUG): Initialize ReadDataComponent to sense time_fix 2018-01-23T00:12:14.569Z,1516666334.569 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:12:14.965Z,1516666334.965 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:12:15.371Z,1516666335.371 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:12:15.776Z,1516666335.776 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:12:16.187Z,1516666336.187 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:12:16.562Z,1516666336.562 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:12:16.967Z,1516666336.967 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:12:17.389Z,1516666337.389 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:12:17.551Z,1516666337.551 [CTD_Seabird](INFO): Stopping potential previous instance(s) of CTD_Seabird LCM interface 2018-01-23T00:12:17.664Z,1516666337.664 [CTD_Seabird](INFO): Started Seabird LCM interface with command:nohup ./lrauv-framework/onboard/bin/gpctd -ldir /mnt/mmc/LRAUV/Logs/latest/ -dev /dev/ttyC6 -b 9600 >& /dev/null & 2018-01-23T00:12:17.666Z,1516666337.666 [CTD_Seabird](INFO): LCM subscribed to channel:ctd_t.seabird-gpctd 2018-01-23T00:12:17.774Z,1516666337.774 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:12:18.184Z,1516666338.184 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:12:18.587Z,1516666338.587 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:12:18.987Z,1516666338.987 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:12:19.363Z,1516666339.363 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:12:19.736Z,1516666339.736 [Aanderaa_O2](DEBUG): Error parsing data: 4831F 448 240.576 87.461  21.605 30.856 30.856 38.647 7.791 844.1 865.6 242.1 2018-01-23T00:12:19.737Z,1516666339.737 [Aanderaa_O2](DEBUG): Error parsing device response 2018-01-23T00:12:19.779Z,1516666339.779 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:12:20.164Z,1516666340.164 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:12:20.573Z,1516666340.573 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:12:20.935Z,1516666340.935 [Aanderaa_O2](DEBUG): Error parsing data: 4831F 448 240.504 87.435 21.605 30.859 30.859 38.652 7.793 844.1 864.5 242.1 2018-01-23T00:12:20.935Z,1516666340.935 [Aanderaa_O2](DEBUG): Error parsing device response 2018-01-23T00:12:20.970Z,1516666340.970 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:12:21.375Z,1516666341.375 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:12:21.781Z,1516666341.781 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:12:22.134Z,1516666342.134 [Aanderaa_O2](DEBUG): Error parsing data: 4831F 448 240.517 87.440 21.606 30.858 30.858 38.649 7.790 844.0 863.6 242.1 2018-01-23T00:12:22.134Z,1516666342.134 [Aanderaa_O2](DEBUG): Error parsing device response 2018-01-23T00:12:22.178Z,1516666342.178 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:12:22.570Z,1516666342.570 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:12:22.979Z,1516666342.979 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:12:23.371Z,1516666343.371 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:12:23.782Z,1516666343.782 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:12:24.137Z,1516666344.137 [Aanderaa_O2](DEBUG): Error parsing data: 4831F 448 240.609 87.475 21.606 30.854 30.854 38.648 7.794 843.7 862.3 242.1 2018-01-23T00:12:24.137Z,1516666344.137 [Aanderaa_O2](DEBUG): Error parsing device response 2018-01-23T00:12:24.210Z,1516666344.210 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:12:24.579Z,1516666344.579 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:12:24.983Z,1516666344.983 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:12:25.368Z,1516666345.368 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:12:25.767Z,1516666345.767 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:12:26.175Z,1516666346.175 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:12:26.570Z,1516666346.570 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:12:26.965Z,1516666346.965 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:12:27.388Z,1516666347.388 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:12:27.775Z,1516666347.775 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:12:28.191Z,1516666348.191 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:12:28.569Z,1516666348.569 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:12:28.973Z,1516666348.973 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:12:29.366Z,1516666349.366 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:12:29.780Z,1516666349.780 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:12:30.176Z,1516666350.176 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:12:30.579Z,1516666350.579 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:12:30.993Z,1516666350.993 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:12:31.363Z,1516666351.363 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:12:31.768Z,1516666351.768 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:12:32.169Z,1516666352.169 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:12:32.566Z,1516666352.566 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:12:32.972Z,1516666352.972 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:12:33.383Z,1516666353.383 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:12:33.783Z,1516666353.783 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:12:34.176Z,1516666354.176 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:12:34.571Z,1516666354.571 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:12:34.966Z,1516666354.966 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:12:35.380Z,1516666355.380 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:12:35.760Z,1516666355.760 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:12:35.814Z,1516666355.814 [DriftOrDonutAtChlPeak:AbortDrift:B.AbortDrift](INFO): Received valid acoustic ping at time: 1516666368.00. Resetting abort timer. 2018-01-23T00:12:35.843Z,1516666355.843 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010868 psu 2018-01-23T00:12:35.845Z,1516666355.845 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:12:36.179Z,1516666356.179 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:12:36.581Z,1516666356.581 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:12:36.980Z,1516666356.980 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:12:37.049Z,1516666357.049 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010868 psu 2018-01-23T00:12:37.051Z,1516666357.051 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:12:37.843Z,1516666357.843 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010869 psu 2018-01-23T00:12:37.845Z,1516666357.845 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:12:39.044Z,1516666359.044 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010869 psu 2018-01-23T00:12:39.045Z,1516666359.045 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:12:40.244Z,1516666360.244 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010870 psu 2018-01-23T00:12:40.245Z,1516666360.245 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:12:40.848Z,1516666360.848 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010870 psu 2018-01-23T00:12:40.849Z,1516666360.849 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:12:42.048Z,1516666362.048 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010871 psu 2018-01-23T00:12:42.049Z,1516666362.049 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:12:43.248Z,1516666363.248 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010871 psu 2018-01-23T00:12:43.250Z,1516666363.250 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:12:43.852Z,1516666363.852 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010871 psu 2018-01-23T00:12:43.853Z,1516666363.853 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:12:45.052Z,1516666365.052 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010872 psu 2018-01-23T00:12:45.053Z,1516666365.053 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:12:45.982Z,1516666365.982 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:12:46.253Z,1516666366.253 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010872 psu 2018-01-23T00:12:46.255Z,1516666366.255 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:12:46.383Z,1516666366.383 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:12:46.789Z,1516666366.789 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:12:46.863Z,1516666366.863 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010873 psu 2018-01-23T00:12:46.865Z,1516666366.865 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:12:47.203Z,1516666367.203 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:12:47.598Z,1516666367.598 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:12:47.000Z,1516666368.000 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:12:48.064Z,1516666368.064 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010873 psu 2018-01-23T00:12:48.065Z,1516666368.065 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:12:48.396Z,1516666368.396 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:12:48.795Z,1516666368.795 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:12:49.199Z,1516666369.199 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:12:49.264Z,1516666369.264 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010873 psu 2018-01-23T00:12:49.265Z,1516666369.265 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:12:49.600Z,1516666369.600 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:12:49.862Z,1516666369.862 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010874 psu 2018-01-23T00:12:49.863Z,1516666369.863 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:12:49.999Z,1516666369.999 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:12:50.410Z,1516666370.410 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:12:50.806Z,1516666370.806 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:12:51.064Z,1516666371.064 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010874 psu 2018-01-23T00:12:51.065Z,1516666371.065 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:12:51.206Z,1516666371.206 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:12:51.591Z,1516666371.591 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:12:51.998Z,1516666371.998 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:12:52.264Z,1516666372.264 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010875 psu 2018-01-23T00:12:52.265Z,1516666372.265 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:12:52.399Z,1516666372.399 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:12:52.798Z,1516666372.798 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:12:52.866Z,1516666372.866 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010875 psu 2018-01-23T00:12:52.868Z,1516666372.868 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:12:53.216Z,1516666373.216 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:12:53.609Z,1516666373.609 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:12:53.996Z,1516666373.996 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:12:54.068Z,1516666374.068 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010875 psu 2018-01-23T00:12:54.069Z,1516666374.069 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:12:54.399Z,1516666374.399 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:12:54.798Z,1516666374.798 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:12:55.195Z,1516666375.195 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:12:55.268Z,1516666375.268 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010876 psu 2018-01-23T00:12:55.269Z,1516666375.269 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:12:55.359Z,1516666375.359 [CommandLine](IMPORTANT): got command show stack 2018-01-23T00:12:55.359Z,1516666375.359 [CommandLine](IMPORTANT): Behavior Stack: 2018-01-23T00:12:55.360Z,1516666375.360 [DriftOrDonutAtChlPeak:StandardEnvelopes](IMPORTANT): Priority 0: DriftOrDonutAtChlPeak:StandardEnvelopes:A.AltitudeEnvelope 2018-01-23T00:12:55.361Z,1516666375.361 [DriftOrDonutAtChlPeak:StandardEnvelopes](IMPORTANT): Priority 1: DriftOrDonutAtChlPeak:StandardEnvelopes:B.DepthEnvelope 2018-01-23T00:12:55.361Z,1516666375.361 [DriftOrDonutAtChlPeak:StandardEnvelopes](IMPORTANT): Priority 2: DriftOrDonutAtChlPeak:StandardEnvelopes:C.OffshoreEnvelope 2018-01-23T00:12:55.361Z,1516666375.361 [DriftOrDonutAtChlPeak:AbortDrift](IMPORTANT): Priority 3: DriftOrDonutAtChlPeak:AbortDrift:B.AbortDrift 2018-01-23T00:12:55.362Z,1516666375.362 [DriftOrDonutAtChlPeak](IMPORTANT): Priority 4: DriftOrDonutAtChlPeak:H.Pitch 2018-01-23T00:12:55.364Z,1516666375.364 [DriftOrDonutAtChlPeak:Science](IMPORTANT): Priority 5: DriftOrDonutAtChlPeak:Science:A 2018-01-23T00:12:55.364Z,1516666375.364 [DriftOrDonutAtChlPeak:Science](IMPORTANT): Priority 6: DriftOrDonutAtChlPeak:Science:C 2018-01-23T00:12:55.364Z,1516666375.364 [DriftOrDonutAtChlPeak:Science](IMPORTANT): Priority 7: DriftOrDonutAtChlPeak:Science:D 2018-01-23T00:12:55.364Z,1516666375.364 [DriftOrDonutAtChlPeak:Science](IMPORTANT): Priority 8: DriftOrDonutAtChlPeak:Science:G 2018-01-23T00:12:55.365Z,1516666375.365 [DriftOrDonutAtChlPeak:Science](IMPORTANT): Priority 9: DriftOrDonutAtChlPeak:Science:H 2018-01-23T00:12:55.365Z,1516666375.365 [DriftOrDonutAtChlPeak:Science:PeakDetectChl](IMPORTANT): Priority 10: DriftOrDonutAtChlPeak:Science:PeakDetectChl:A.PeakDetectVsDepth 2018-01-23T00:12:55.365Z,1516666375.365 [DriftOrDonutAtChlPeak:Science:HighestChlPeakReport](IMPORTANT): Priority 11: DriftOrDonutAtChlPeak:Science:HighestChlPeakReport:A.PeakDetectHorizontal 2018-01-23T00:12:55.366Z,1516666375.366 [DriftOrDonutAtChlPeak](IMPORTANT): Priority 12: DriftOrDonutAtChlPeak:J.AltitudeEnvelope 2018-01-23T00:12:55.366Z,1516666375.366 [DriftOrDonutAtChlPeak:MissionStart:NeedComms](IMPORTANT): Priority 13: DriftOrDonutAtChlPeak:MissionStart:NeedComms:B.GoToSurface 2018-01-23T00:12:55.366Z,1516666375.366 [DriftOrDonutAtChlPeak:MissionStart:NeedComms](IMPORTANT): Priority 14: DriftOrDonutAtChlPeak:MissionStart:NeedComms:C 2018-01-23T00:12:55.607Z,1516666375.607 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:12:55.899Z,1516666375.899 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010876 psu 2018-01-23T00:12:55.900Z,1516666375.900 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:12:56.002Z,1516666376.002 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:12:56.403Z,1516666376.403 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:12:56.807Z,1516666376.807 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:12:57.100Z,1516666377.100 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010877 psu 2018-01-23T00:12:57.101Z,1516666377.101 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:12:57.200Z,1516666377.200 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:12:57.611Z,1516666377.611 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:12:57.874Z,1516666377.874 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010877 psu 2018-01-23T00:12:57.875Z,1516666377.875 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:12:57.000Z,1516666378.000 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:12:58.392Z,1516666378.392 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:12:58.809Z,1516666378.809 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:12:59.076Z,1516666379.076 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010877 psu 2018-01-23T00:12:59.077Z,1516666379.077 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:12:59.213Z,1516666379.213 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:12:59.636Z,1516666379.636 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:13:00.012Z,1516666380.012 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:13:00.280Z,1516666380.280 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010878 psu 2018-01-23T00:13:00.281Z,1516666380.281 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:13:00.389Z,1516666380.389 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:13:00.813Z,1516666380.813 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:13:00.879Z,1516666380.879 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010878 psu 2018-01-23T00:13:00.880Z,1516666380.880 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:13:01.214Z,1516666381.214 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:13:01.612Z,1516666381.612 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:13:01.748Z,1516666381.748 [DriftOrDonutAtChlPeak:AbortDrift:B.AbortDrift](INFO): Received valid acoustic ping at time: 1516666368.00. Resetting abort timer. 2018-01-23T00:13:02.019Z,1516666382.019 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:13:02.080Z,1516666382.080 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010879 psu 2018-01-23T00:13:02.081Z,1516666382.081 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:13:02.406Z,1516666382.406 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:13:02.816Z,1516666382.816 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:13:03.221Z,1516666383.221 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:13:03.280Z,1516666383.280 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010879 psu 2018-01-23T00:13:03.281Z,1516666383.281 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:13:03.603Z,1516666383.603 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:13:03.883Z,1516666383.883 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010879 psu 2018-01-23T00:13:03.885Z,1516666383.885 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:13:04.140Z,1516666384.139 [CommandLine](IMPORTANT): got command show stack 2018-01-23T00:13:04.140Z,1516666384.140 [CommandLine](IMPORTANT): Behavior Stack: 2018-01-23T00:13:04.141Z,1516666384.141 [DriftOrDonutAtChlPeak:StandardEnvelopes](IMPORTANT): Priority 0: DriftOrDonutAtChlPeak:StandardEnvelopes:A.AltitudeEnvelope 2018-01-23T00:13:04.141Z,1516666384.141 [DriftOrDonutAtChlPeak:StandardEnvelopes](IMPORTANT): Priority 1: DriftOrDonutAtChlPeak:StandardEnvelopes:B.DepthEnvelope 2018-01-23T00:13:04.141Z,1516666384.141 [DriftOrDonutAtChlPeak:StandardEnvelopes](IMPORTANT): Priority 2: DriftOrDonutAtChlPeak:StandardEnvelopes:C.OffshoreEnvelope 2018-01-23T00:13:04.141Z,1516666384.141 [DriftOrDonutAtChlPeak:AbortDrift](IMPORTANT): Priority 3: DriftOrDonutAtChlPeak:AbortDrift:B.AbortDrift 2018-01-23T00:13:04.142Z,1516666384.142 [DriftOrDonutAtChlPeak](IMPORTANT): Priority 4: DriftOrDonutAtChlPeak:H.Pitch 2018-01-23T00:13:04.143Z,1516666384.143 [DriftOrDonutAtChlPeak:Science](IMPORTANT): Priority 5: DriftOrDonutAtChlPeak:Science:A 2018-01-23T00:13:04.144Z,1516666384.144 [DriftOrDonutAtChlPeak:Science](IMPORTANT): Priority 6: DriftOrDonutAtChlPeak:Science:C 2018-01-23T00:13:04.144Z,1516666384.144 [DriftOrDonutAtChlPeak:Science](IMPORTANT): Priority 7: DriftOrDonutAtChlPeak:Science:D 2018-01-23T00:13:04.144Z,1516666384.144 [DriftOrDonutAtChlPeak:Science](IMPORTANT): Priority 8: DriftOrDonutAtChlPeak:Science:G 2018-01-23T00:13:04.145Z,1516666384.145 [DriftOrDonutAtChlPeak:Science](IMPORTANT): Priority 9: DriftOrDonutAtChlPeak:Science:H 2018-01-23T00:13:04.145Z,1516666384.145 [DriftOrDonutAtChlPeak:Science:PeakDetectChl](IMPORTANT): Priority 10: DriftOrDonutAtChlPeak:Science:PeakDetectChl:A.PeakDetectVsDepth 2018-01-23T00:13:04.145Z,1516666384.145 [DriftOrDonutAtChlPeak:Science:HighestChlPeakReport](IMPORTANT): Priority 11: DriftOrDonutAtChlPeak:Science:HighestChlPeakReport:A.PeakDetectHorizontal 2018-01-23T00:13:04.146Z,1516666384.146 [DriftOrDonutAtChlPeak](IMPORTANT): Priority 12: DriftOrDonutAtChlPeak:J.AltitudeEnvelope 2018-01-23T00:13:04.146Z,1516666384.146 [DriftOrDonutAtChlPeak:MissionStart:NeedComms](IMPORTANT): Priority 13: DriftOrDonutAtChlPeak:MissionStart:NeedComms:B.GoToSurface 2018-01-23T00:13:04.146Z,1516666384.146 [DriftOrDonutAtChlPeak:MissionStart:NeedComms](IMPORTANT): Priority 14: DriftOrDonutAtChlPeak:MissionStart:NeedComms:C 2018-01-23T00:13:05.084Z,1516666385.084 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010880 psu 2018-01-23T00:13:05.085Z,1516666385.085 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:13:06.284Z,1516666386.284 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010880 psu 2018-01-23T00:13:06.285Z,1516666386.285 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:13:06.888Z,1516666386.888 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010881 psu 2018-01-23T00:13:06.889Z,1516666386.889 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:13:08.088Z,1516666388.088 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010881 psu 2018-01-23T00:13:08.089Z,1516666388.089 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:13:09.290Z,1516666389.290 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010882 psu 2018-01-23T00:13:09.292Z,1516666389.292 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:13:09.893Z,1516666389.893 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010882 psu 2018-01-23T00:13:09.894Z,1516666389.894 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:13:11.092Z,1516666391.092 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010882 psu 2018-01-23T00:13:11.093Z,1516666391.093 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:13:12.292Z,1516666392.292 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010883 psu 2018-01-23T00:13:12.293Z,1516666392.293 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:13:12.404Z,1516666392.404 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:13:12.802Z,1516666392.802 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:13:12.897Z,1516666392.897 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010883 psu 2018-01-23T00:13:12.899Z,1516666392.899 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:13:13.194Z,1516666393.194 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:13:13.584Z,1516666393.584 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:13:14.031Z,1516666394.031 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:13:14.100Z,1516666394.100 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010884 psu 2018-01-23T00:13:14.102Z,1516666394.102 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:13:14.429Z,1516666394.429 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:13:14.809Z,1516666394.809 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:13:15.206Z,1516666395.206 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:13:15.300Z,1516666395.300 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010884 psu 2018-01-23T00:13:15.301Z,1516666395.301 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:13:15.582Z,1516666395.582 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:13:15.902Z,1516666395.902 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010884 psu 2018-01-23T00:13:15.903Z,1516666395.903 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:13:15.992Z,1516666395.992 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:13:16.387Z,1516666396.387 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:13:16.812Z,1516666396.812 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:13:17.104Z,1516666397.104 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010885 psu 2018-01-23T00:13:17.105Z,1516666397.105 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:13:17.211Z,1516666397.211 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:13:17.604Z,1516666397.604 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:13:18.004Z,1516666398.004 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:13:18.304Z,1516666398.304 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010885 psu 2018-01-23T00:13:18.305Z,1516666398.305 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:13:18.382Z,1516666398.382 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:13:18.788Z,1516666398.788 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:13:18.907Z,1516666398.907 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010886 psu 2018-01-23T00:13:18.909Z,1516666398.909 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:13:19.199Z,1516666399.199 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:13:19.592Z,1516666399.592 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:13:19.992Z,1516666399.992 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:13:20.109Z,1516666400.109 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010886 psu 2018-01-23T00:13:20.110Z,1516666400.110 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:13:20.408Z,1516666400.408 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:13:20.809Z,1516666400.809 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:13:21.201Z,1516666401.201 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:13:21.308Z,1516666401.308 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010886 psu 2018-01-23T00:13:21.309Z,1516666401.309 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:13:21.597Z,1516666401.597 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:13:21.912Z,1516666401.912 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010887 psu 2018-01-23T00:13:21.914Z,1516666401.914 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:13:22.004Z,1516666402.004 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:13:22.398Z,1516666402.398 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:13:22.800Z,1516666402.800 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:13:23.112Z,1516666403.112 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010887 psu 2018-01-23T00:13:23.113Z,1516666403.113 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:13:23.197Z,1516666403.197 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:13:23.595Z,1516666403.595 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:13:23.618Z,1516666403.618 [PNI_TCM](ERROR): CRC does not match. Expected:0x25900 got:0x1347 2018-01-23T00:13:24.017Z,1516666404.017 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:13:24.312Z,1516666404.312 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010888 psu 2018-01-23T00:13:24.313Z,1516666404.313 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:13:24.412Z,1516666404.412 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:13:24.792Z,1516666404.792 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:13:24.921Z,1516666404.921 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010888 psu 2018-01-23T00:13:24.922Z,1516666404.922 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:13:25.137Z,1516666405.137 [CommandLine](IMPORTANT): got command set NAL9602.time_fix 1516666368.000000 second 2018-01-23T00:13:25.203Z,1516666405.203 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:13:25.238Z,1516666405.238 [DriftOrDonutAtChlPeak:MissionStart:NeedComms:C] Stopped 2018-01-23T00:13:26.120Z,1516666406.120 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010888 psu 2018-01-23T00:13:26.121Z,1516666406.121 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:13:27.320Z,1516666407.320 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010889 psu 2018-01-23T00:13:27.321Z,1516666407.321 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:13:27.920Z,1516666407.920 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010889 psu 2018-01-23T00:13:27.921Z,1516666407.921 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:13:29.120Z,1516666409.120 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010890 psu 2018-01-23T00:13:29.121Z,1516666409.121 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:13:29.547Z,1516666409.547 [DriftOrDonutAtChlPeak:MissionStart:NeedComms:D] Running Loop=1 2018-01-23T00:13:29.552Z,1516666409.552 [DriftOrDonutAtChlPeak:AbortDrift:B.AbortDrift](INFO): Received valid gps time fix: 1516666368.00. Resetting abort timer. 2018-01-23T00:13:29.635Z,1516666409.635 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:13:29.678Z,1516666409.678 [DriftOrDonutAtChlPeak:MissionStart:NeedComms:D](DEBUG): Initialize ReadDataComponent to sense platform_communications 2018-01-23T00:13:29.685Z,1516666409.685 [DriftOrDonutAtChlPeak:AbortDrift:B.AbortDrift](INFO): Received valid acoustic ping at time: 1516666368.00. Resetting abort timer. 2018-01-23T00:13:30.320Z,1516666410.320 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010890 psu 2018-01-23T00:13:30.321Z,1516666410.321 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:13:30.417Z,1516666410.417 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:13:30.723Z,1516666410.723 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:13:30.925Z,1516666410.925 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010891 psu 2018-01-23T00:13:30.926Z,1516666410.926 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:13:32.124Z,1516666412.124 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010891 psu 2018-01-23T00:13:32.126Z,1516666412.126 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:13:33.324Z,1516666413.324 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010891 psu 2018-01-23T00:13:33.325Z,1516666413.325 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:13:33.929Z,1516666413.929 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010891 psu 2018-01-23T00:13:33.931Z,1516666413.931 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:13:34.514Z,1516666414.514 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:13:34.660Z,1516666414.660 [DataOverHttps](INFO): Sending 43 bytes from file Logs/20180123T000528/Courier0004.lzma 2018-01-23T00:13:34.697Z,1516666414.697 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:13:35.079Z,1516666415.079 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:13:35.132Z,1516666415.132 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010892 psu 2018-01-23T00:13:35.133Z,1516666415.133 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:13:35.459Z,1516666415.459 [DataOverHttps](INFO): Moved sent file to Logs/20180123T000528/Courier0004.lzma.bak 2018-01-23T00:13:35.459Z,1516666415.459 [DataOverHttps](INFO): SBD MOMSN=7753170 2018-01-23T00:13:36.340Z,1516666416.340 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010893 psu 2018-01-23T00:13:36.341Z,1516666416.341 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:13:36.934Z,1516666416.934 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010893 psu 2018-01-23T00:13:36.935Z,1516666416.935 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:13:38.136Z,1516666418.136 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010893 psu 2018-01-23T00:13:38.137Z,1516666418.137 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:13:39.336Z,1516666419.336 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010893 psu 2018-01-23T00:13:39.337Z,1516666419.337 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:13:39.939Z,1516666419.939 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010894 psu 2018-01-23T00:13:39.940Z,1516666419.940 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:13:41.140Z,1516666421.140 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010895 psu 2018-01-23T00:13:41.141Z,1516666421.141 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:13:42.341Z,1516666422.341 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010895 psu 2018-01-23T00:13:42.343Z,1516666422.343 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:13:42.943Z,1516666422.943 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010895 psu 2018-01-23T00:13:42.944Z,1516666422.944 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:13:44.144Z,1516666424.144 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010896 psu 2018-01-23T00:13:44.145Z,1516666424.145 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:13:45.344Z,1516666425.344 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010896 psu 2018-01-23T00:13:45.345Z,1516666425.345 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:13:45.760Z,1516666425.760 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180123T000528/Courier0008.lzma 2018-01-23T00:13:45.948Z,1516666425.948 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010896 psu 2018-01-23T00:13:45.949Z,1516666425.949 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:13:46.578Z,1516666426.578 [DataOverHttps](INFO): Moved sent file to Logs/20180123T000528/Courier0008.lzma.bak 2018-01-23T00:13:46.596Z,1516666426.596 [CommandLine](IMPORTANT): got command get depth 2018-01-23T00:13:46.596Z,1516666426.596 [CommandLine](IMPORTANT): depth -1.269343 m 2018-01-23T00:13:46.600Z,1516666426.600 [DataOverHttps](INFO): SBD MOMSN=7753172 2018-01-23T00:13:47.148Z,1516666427.148 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010896 psu 2018-01-23T00:13:47.149Z,1516666427.149 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:13:48.348Z,1516666428.348 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010897 psu 2018-01-23T00:13:48.349Z,1516666428.349 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:13:48.945Z,1516666428.945 [CommandLine](IMPORTANT): got command show stack 2018-01-23T00:13:48.945Z,1516666428.945 [CommandLine](IMPORTANT): Behavior Stack: 2018-01-23T00:13:48.947Z,1516666428.947 [DriftOrDonutAtChlPeak:StandardEnvelopes](IMPORTANT): Priority 0: DriftOrDonutAtChlPeak:StandardEnvelopes:A.AltitudeEnvelope 2018-01-23T00:13:48.947Z,1516666428.947 [DriftOrDonutAtChlPeak:StandardEnvelopes](IMPORTANT): Priority 1: DriftOrDonutAtChlPeak:StandardEnvelopes:B.DepthEnvelope 2018-01-23T00:13:48.948Z,1516666428.948 [DriftOrDonutAtChlPeak:StandardEnvelopes](IMPORTANT): Priority 2: DriftOrDonutAtChlPeak:StandardEnvelopes:C.OffshoreEnvelope 2018-01-23T00:13:48.948Z,1516666428.948 [DriftOrDonutAtChlPeak:AbortDrift](IMPORTANT): Priority 3: DriftOrDonutAtChlPeak:AbortDrift:B.AbortDrift 2018-01-23T00:13:48.949Z,1516666428.949 [DriftOrDonutAtChlPeak](IMPORTANT): Priority 4: DriftOrDonutAtChlPeak:H.Pitch 2018-01-23T00:13:48.950Z,1516666428.950 [DriftOrDonutAtChlPeak:Science](IMPORTANT): Priority 5: DriftOrDonutAtChlPeak:Science:A 2018-01-23T00:13:48.950Z,1516666428.950 [DriftOrDonutAtChlPeak:Science](IMPORTANT): Priority 6: DriftOrDonutAtChlPeak:Science:C 2018-01-23T00:13:48.971Z,1516666428.971 [DriftOrDonutAtChlPeak:Science](IMPORTANT): Priority 7: DriftOrDonutAtChlPeak:Science:D 2018-01-23T00:13:48.971Z,1516666428.971 [DriftOrDonutAtChlPeak:Science](IMPORTANT): Priority 8: DriftOrDonutAtChlPeak:Science:G 2018-01-23T00:13:48.972Z,1516666428.972 [DriftOrDonutAtChlPeak:Science](IMPORTANT): Priority 9: DriftOrDonutAtChlPeak:Science:H 2018-01-23T00:13:48.972Z,1516666428.972 [DriftOrDonutAtChlPeak:Science:PeakDetectChl](IMPORTANT): Priority 10: DriftOrDonutAtChlPeak:Science:PeakDetectChl:A.PeakDetectVsDepth 2018-01-23T00:13:48.972Z,1516666428.972 [DriftOrDonutAtChlPeak:Science:HighestChlPeakReport](IMPORTANT): Priority 11: DriftOrDonutAtChlPeak:Science:HighestChlPeakReport:A.PeakDetectHorizontal 2018-01-23T00:13:48.973Z,1516666428.973 [DriftOrDonutAtChlPeak](IMPORTANT): Priority 12: DriftOrDonutAtChlPeak:J.AltitudeEnvelope 2018-01-23T00:13:48.973Z,1516666428.973 [DriftOrDonutAtChlPeak:MissionStart:NeedComms](IMPORTANT): Priority 13: DriftOrDonutAtChlPeak:MissionStart:NeedComms:B.GoToSurface 2018-01-23T00:13:48.973Z,1516666428.973 [DriftOrDonutAtChlPeak:MissionStart:NeedComms](IMPORTANT): Priority 14: DriftOrDonutAtChlPeak:MissionStart:NeedComms:D 2018-01-23T00:13:48.986Z,1516666428.986 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010898 psu 2018-01-23T00:13:48.987Z,1516666428.987 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:13:50.188Z,1516666430.188 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010898 psu 2018-01-23T00:13:50.189Z,1516666430.189 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:13:50.956Z,1516666430.956 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010898 psu 2018-01-23T00:13:50.957Z,1516666430.957 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:13:51.699Z,1516666431.699 [DriftOrDonutAtChlPeak:AbortDrift:B.AbortDrift](INFO): Received valid acoustic ping at time: 1516666368.00. Resetting abort timer. 2018-01-23T00:13:52.156Z,1516666432.156 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010899 psu 2018-01-23T00:13:52.157Z,1516666432.157 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:13:53.358Z,1516666433.358 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010899 psu 2018-01-23T00:13:53.360Z,1516666433.360 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:13:53.961Z,1516666433.961 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010900 psu 2018-01-23T00:13:53.962Z,1516666433.962 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:13:55.160Z,1516666435.160 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010900 psu 2018-01-23T00:13:55.161Z,1516666435.161 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:13:56.360Z,1516666436.360 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010900 psu 2018-01-23T00:13:56.361Z,1516666436.361 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:13:56.965Z,1516666436.965 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010901 psu 2018-01-23T00:13:56.966Z,1516666436.966 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:13:57.267Z,1516666437.267 [DataOverHttps](INFO): Sending 308 bytes from file Logs/20180122T234648/Express0017.lzma 2018-01-23T00:13:58.057Z,1516666438.057 [DataOverHttps](INFO): Moved sent file to Logs/20180122T234648/Express0017.lzma.bak 2018-01-23T00:13:58.057Z,1516666438.057 [DataOverHttps](INFO): SBD MOMSN=7753174 2018-01-23T00:13:58.164Z,1516666438.164 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010901 psu 2018-01-23T00:13:58.165Z,1516666438.165 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:13:59.364Z,1516666439.364 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010901 psu 2018-01-23T00:13:59.365Z,1516666439.365 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:13:59.998Z,1516666439.998 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010902 psu 2018-01-23T00:13:59.999Z,1516666439.999 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:14:01.200Z,1516666441.200 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010902 psu 2018-01-23T00:14:01.201Z,1516666441.201 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:14:01.972Z,1516666441.972 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010903 psu 2018-01-23T00:14:01.974Z,1516666441.974 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:14:02.611Z,1516666442.611 [NAL9602](INFO): Powering down 2018-01-23T00:14:03.172Z,1516666443.172 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010903 psu 2018-01-23T00:14:03.173Z,1516666443.173 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:14:04.372Z,1516666444.372 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010903 psu 2018-01-23T00:14:04.373Z,1516666444.373 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:14:04.977Z,1516666444.977 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010904 psu 2018-01-23T00:14:04.978Z,1516666444.978 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:14:06.180Z,1516666446.180 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010904 psu 2018-01-23T00:14:06.181Z,1516666446.181 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:14:07.380Z,1516666447.380 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010904 psu 2018-01-23T00:14:07.381Z,1516666447.381 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:14:07.982Z,1516666447.982 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010905 psu 2018-01-23T00:14:07.983Z,1516666447.983 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:14:08.282Z,1516666448.282 [DataOverHttps](INFO): Sending 840 bytes from file Logs/20180123T000528/Express0001.lzma 2018-01-23T00:14:09.078Z,1516666449.078 [DataOverHttps](INFO): Moved sent file to Logs/20180123T000528/Express0001.lzma.bak 2018-01-23T00:14:09.078Z,1516666449.078 [DataOverHttps](INFO): SBD MOMSN=7753183 2018-01-23T00:14:09.186Z,1516666449.186 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010905 psu 2018-01-23T00:14:09.187Z,1516666449.187 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:14:09.985Z,1516666449.985 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010906 psu 2018-01-23T00:14:09.986Z,1516666449.986 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:14:11.184Z,1516666451.184 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010906 psu 2018-01-23T00:14:11.185Z,1516666451.185 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:14:11.624Z,1516666451.624 [CommandLine](IMPORTANT): got command show stack 2018-01-23T00:14:11.624Z,1516666451.624 [CommandLine](IMPORTANT): Behavior Stack: 2018-01-23T00:14:11.625Z,1516666451.625 [DriftOrDonutAtChlPeak:StandardEnvelopes](IMPORTANT): Priority 0: DriftOrDonutAtChlPeak:StandardEnvelopes:A.AltitudeEnvelope 2018-01-23T00:14:11.626Z,1516666451.626 [DriftOrDonutAtChlPeak:StandardEnvelopes](IMPORTANT): Priority 1: DriftOrDonutAtChlPeak:StandardEnvelopes:B.DepthEnvelope 2018-01-23T00:14:11.626Z,1516666451.626 [DriftOrDonutAtChlPeak:StandardEnvelopes](IMPORTANT): Priority 2: DriftOrDonutAtChlPeak:StandardEnvelopes:C.OffshoreEnvelope 2018-01-23T00:14:11.626Z,1516666451.626 [DriftOrDonutAtChlPeak:AbortDrift](IMPORTANT): Priority 3: DriftOrDonutAtChlPeak:AbortDrift:B.AbortDrift 2018-01-23T00:14:11.627Z,1516666451.627 [DriftOrDonutAtChlPeak](IMPORTANT): Priority 4: DriftOrDonutAtChlPeak:H.Pitch 2018-01-23T00:14:11.628Z,1516666451.628 [DriftOrDonutAtChlPeak:Science](IMPORTANT): Priority 5: DriftOrDonutAtChlPeak:Science:A 2018-01-23T00:14:11.628Z,1516666451.628 [DriftOrDonutAtChlPeak:Science](IMPORTANT): Priority 6: DriftOrDonutAtChlPeak:Science:C 2018-01-23T00:14:11.628Z,1516666451.628 [DriftOrDonutAtChlPeak:Science](IMPORTANT): Priority 7: DriftOrDonutAtChlPeak:Science:D 2018-01-23T00:14:11.628Z,1516666451.628 [DriftOrDonutAtChlPeak:Science](IMPORTANT): Priority 8: DriftOrDonutAtChlPeak:Science:G 2018-01-23T00:14:11.629Z,1516666451.629 [DriftOrDonutAtChlPeak:Science](IMPORTANT): Priority 9: DriftOrDonutAtChlPeak:Science:H 2018-01-23T00:14:11.629Z,1516666451.629 [DriftOrDonutAtChlPeak:Science:PeakDetectChl](IMPORTANT): Priority 10: DriftOrDonutAtChlPeak:Science:PeakDetectChl:A.PeakDetectVsDepth 2018-01-23T00:14:11.629Z,1516666451.629 [DriftOrDonutAtChlPeak:Science:HighestChlPeakReport](IMPORTANT): Priority 11: DriftOrDonutAtChlPeak:Science:HighestChlPeakReport:A.PeakDetectHorizontal 2018-01-23T00:14:11.630Z,1516666451.630 [DriftOrDonutAtChlPeak](IMPORTANT): Priority 12: DriftOrDonutAtChlPeak:J.AltitudeEnvelope 2018-01-23T00:14:11.630Z,1516666451.630 [DriftOrDonutAtChlPeak:MissionStart:NeedComms](IMPORTANT): Priority 13: DriftOrDonutAtChlPeak:MissionStart:NeedComms:B.GoToSurface 2018-01-23T00:14:11.630Z,1516666451.630 [DriftOrDonutAtChlPeak:MissionStart:NeedComms](IMPORTANT): Priority 14: DriftOrDonutAtChlPeak:MissionStart:NeedComms:D 2018-01-23T00:14:12.384Z,1516666452.384 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010906 psu 2018-01-23T00:14:12.385Z,1516666452.385 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:14:12.990Z,1516666452.990 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010907 psu 2018-01-23T00:14:12.991Z,1516666452.991 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:14:14.192Z,1516666454.192 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010907 psu 2018-01-23T00:14:14.193Z,1516666454.193 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:14:15.392Z,1516666455.392 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010908 psu 2018-01-23T00:14:15.393Z,1516666455.393 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:14:15.000Z,1516666456.000 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010908 psu 2018-01-23T00:14:16.001Z,1516666456.001 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:14:16.158Z,1516666456.158 [DriftOrDonutAtChlPeak:AbortDrift:B.AbortDrift](INFO): Received valid acoustic ping at time: 1516666496.00. Resetting abort timer. 2018-01-23T00:14:17.200Z,1516666457.200 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010908 psu 2018-01-23T00:14:17.201Z,1516666457.201 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:14:18.400Z,1516666458.400 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010909 psu 2018-01-23T00:14:18.401Z,1516666458.401 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:14:18.999Z,1516666458.999 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010909 psu 2018-01-23T00:14:19.001Z,1516666459.001 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:14:20.201Z,1516666460.201 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010909 psu 2018-01-23T00:14:20.202Z,1516666460.202 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:14:21.400Z,1516666461.400 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010910 psu 2018-01-23T00:14:21.401Z,1516666461.401 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:14:22.003Z,1516666462.003 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010910 psu 2018-01-23T00:14:22.005Z,1516666462.005 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:14:23.204Z,1516666463.204 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010911 psu 2018-01-23T00:14:23.205Z,1516666463.205 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:14:24.404Z,1516666464.404 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010911 psu 2018-01-23T00:14:24.405Z,1516666464.405 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:14:25.008Z,1516666465.008 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010911 psu 2018-01-23T00:14:25.009Z,1516666465.009 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:14:25.616Z,1516666465.616 [DataOverHttps](INFO): Sending 1697 bytes from file Logs/20180123T000528/Express0005.lzma 2018-01-23T00:14:26.209Z,1516666466.209 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010912 psu 2018-01-23T00:14:26.210Z,1516666466.210 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:14:26.405Z,1516666466.405 [DataOverHttps](INFO): Moved sent file to Logs/20180123T000528/Express0005.lzma.bak 2018-01-23T00:14:26.405Z,1516666466.405 [DataOverHttps](INFO): SBD MOMSN=7753200 2018-01-23T00:14:27.408Z,1516666467.408 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010912 psu 2018-01-23T00:14:27.409Z,1516666467.409 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:14:28.013Z,1516666468.013 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010912 psu 2018-01-23T00:14:28.014Z,1516666468.014 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:14:29.213Z,1516666469.213 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010913 psu 2018-01-23T00:14:29.214Z,1516666469.214 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:14:30.412Z,1516666470.412 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010913 psu 2018-01-23T00:14:30.413Z,1516666470.413 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:14:31.018Z,1516666471.018 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010913 psu 2018-01-23T00:14:31.019Z,1516666471.019 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:14:32.220Z,1516666472.220 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010914 psu 2018-01-23T00:14:32.221Z,1516666472.221 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:14:33.420Z,1516666473.420 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010914 psu 2018-01-23T00:14:33.421Z,1516666473.421 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:14:34.023Z,1516666474.023 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010914 psu 2018-01-23T00:14:34.025Z,1516666474.025 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:14:35.225Z,1516666475.225 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010915 psu 2018-01-23T00:14:35.226Z,1516666475.226 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:14:36.384Z,1516666476.384 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:14:36.425Z,1516666476.425 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010915 psu 2018-01-23T00:14:36.427Z,1516666476.427 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:14:36.557Z,1516666476.557 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180123T000528/Express0009.lzma 2018-01-23T00:14:36.582Z,1516666476.582 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:14:36.971Z,1516666476.971 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:14:37.026Z,1516666477.026 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010916 psu 2018-01-23T00:14:37.028Z,1516666477.028 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:14:37.337Z,1516666477.337 [DataOverHttps](INFO): Moved sent file to Logs/20180123T000528/Express0009.lzma.bak 2018-01-23T00:14:37.337Z,1516666477.337 [DataOverHttps](INFO): SBD MOMSN=7753287 2018-01-23T00:14:37.360Z,1516666477.360 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:14:37.454Z,1516666477.454 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = 0.000000, longitudeAccuracy_ = 0.000000, depthAccuracy_ = nan 2018-01-23T00:14:37.454Z,1516666477.454 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 1 2018-01-23T00:14:37.459Z,1516666477.459 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T00:14:37.547Z,1516666477.547 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T00:14:38.168Z,1516666478.168 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:14:38.209Z,1516666478.209 [DriftOrDonutAtChlPeak:MissionStart:NeedComms:D] Stopped 2018-01-23T00:14:38.209Z,1516666478.209 [DriftOrDonutAtChlPeak:MissionStart:NeedComms:E] Running Loop=1 2018-01-23T00:14:38.228Z,1516666478.228 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010916 psu 2018-01-23T00:14:38.229Z,1516666478.229 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:14:38.303Z,1516666478.303 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T00:14:38.303Z,1516666478.303 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 1 2018-01-23T00:14:38.366Z,1516666478.366 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:14:38.429Z,1516666478.429 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T00:14:38.430Z,1516666478.430 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T00:14:38.430Z,1516666478.430 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T00:14:38.451Z,1516666478.451 [DriftOrDonutAtChlPeak:MissionStart:NeedComms:E](DEBUG): Initialize ReadDataComponent to sense time_fix 2018-01-23T00:14:39.429Z,1516666479.429 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010916 psu 2018-01-23T00:14:39.431Z,1516666479.431 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:14:40.031Z,1516666480.031 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010916 psu 2018-01-23T00:14:40.032Z,1516666480.032 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:14:40.064Z,1516666480.064 [CommandLine](IMPORTANT): got command show stack 2018-01-23T00:14:40.064Z,1516666480.064 [CommandLine](IMPORTANT): Behavior Stack: 2018-01-23T00:14:40.065Z,1516666480.065 [DriftOrDonutAtChlPeak:StandardEnvelopes](IMPORTANT): Priority 0: DriftOrDonutAtChlPeak:StandardEnvelopes:A.AltitudeEnvelope 2018-01-23T00:14:40.066Z,1516666480.066 [DriftOrDonutAtChlPeak:StandardEnvelopes](IMPORTANT): Priority 1: DriftOrDonutAtChlPeak:StandardEnvelopes:B.DepthEnvelope 2018-01-23T00:14:40.066Z,1516666480.066 [DriftOrDonutAtChlPeak:StandardEnvelopes](IMPORTANT): Priority 2: DriftOrDonutAtChlPeak:StandardEnvelopes:C.OffshoreEnvelope 2018-01-23T00:14:40.066Z,1516666480.066 [DriftOrDonutAtChlPeak:AbortDrift](IMPORTANT): Priority 3: DriftOrDonutAtChlPeak:AbortDrift:B.AbortDrift 2018-01-23T00:14:40.067Z,1516666480.067 [DriftOrDonutAtChlPeak](IMPORTANT): Priority 4: DriftOrDonutAtChlPeak:H.Pitch 2018-01-23T00:14:40.068Z,1516666480.068 [DriftOrDonutAtChlPeak:Science](IMPORTANT): Priority 5: DriftOrDonutAtChlPeak:Science:A 2018-01-23T00:14:40.068Z,1516666480.068 [DriftOrDonutAtChlPeak:Science](IMPORTANT): Priority 6: DriftOrDonutAtChlPeak:Science:C 2018-01-23T00:14:40.068Z,1516666480.068 [DriftOrDonutAtChlPeak:Science](IMPORTANT): Priority 7: DriftOrDonutAtChlPeak:Science:D 2018-01-23T00:14:40.069Z,1516666480.069 [DriftOrDonutAtChlPeak:Science](IMPORTANT): Priority 8: DriftOrDonutAtChlPeak:Science:G 2018-01-23T00:14:40.069Z,1516666480.069 [DriftOrDonutAtChlPeak:Science](IMPORTANT): Priority 9: DriftOrDonutAtChlPeak:Science:H 2018-01-23T00:14:40.069Z,1516666480.069 [DriftOrDonutAtChlPeak:Science:PeakDetectChl](IMPORTANT): Priority 10: DriftOrDonutAtChlPeak:Science:PeakDetectChl:A.PeakDetectVsDepth 2018-01-23T00:14:40.069Z,1516666480.069 [DriftOrDonutAtChlPeak:Science:HighestChlPeakReport](IMPORTANT): Priority 11: DriftOrDonutAtChlPeak:Science:HighestChlPeakReport:A.PeakDetectHorizontal 2018-01-23T00:14:40.070Z,1516666480.070 [DriftOrDonutAtChlPeak](IMPORTANT): Priority 12: DriftOrDonutAtChlPeak:J.AltitudeEnvelope 2018-01-23T00:14:40.070Z,1516666480.070 [DriftOrDonutAtChlPeak:MissionStart:NeedComms](IMPORTANT): Priority 13: DriftOrDonutAtChlPeak:MissionStart:NeedComms:B.GoToSurface 2018-01-23T00:14:40.070Z,1516666480.070 [DriftOrDonutAtChlPeak:MissionStart:NeedComms](IMPORTANT): Priority 14: DriftOrDonutAtChlPeak:MissionStart:NeedComms:E 2018-01-23T00:14:41.232Z,1516666481.232 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010917 psu 2018-01-23T00:14:41.233Z,1516666481.233 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:14:42.257Z,1516666482.257 [NAL9602](INFO): Powering up 2018-01-23T00:14:42.275Z,1516666482.275 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:14:42.330Z,1516666482.330 [DriftOrDonutAtChlPeak:AbortDrift:B.AbortDrift](INFO): Received valid acoustic ping at time: 1516666496.00. Resetting abort timer. 2018-01-23T00:14:42.432Z,1516666482.432 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010917 psu 2018-01-23T00:14:42.433Z,1516666482.433 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:14:42.464Z,1516666482.464 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:14:42.845Z,1516666482.845 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:14:43.047Z,1516666483.047 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010918 psu 2018-01-23T00:14:43.048Z,1516666483.048 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:14:44.248Z,1516666484.248 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010918 psu 2018-01-23T00:14:44.249Z,1516666484.249 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:14:45.448Z,1516666485.448 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010919 psu 2018-01-23T00:14:45.449Z,1516666485.449 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:14:46.050Z,1516666486.050 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010919 psu 2018-01-23T00:14:46.052Z,1516666486.052 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:14:47.252Z,1516666487.252 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010919 psu 2018-01-23T00:14:47.253Z,1516666487.253 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:14:48.044Z,1516666488.044 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010919 psu 2018-01-23T00:14:48.045Z,1516666488.045 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:14:49.244Z,1516666489.244 [CTD_Seabird](ERROR): Salinity reading out of range: 0.011045 psu 2018-01-23T00:14:49.245Z,1516666489.245 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:14:50.445Z,1516666490.445 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010920 psu 2018-01-23T00:14:50.446Z,1516666490.446 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:14:51.050Z,1516666491.050 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010921 psu 2018-01-23T00:14:51.051Z,1516666491.051 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:14:52.252Z,1516666492.252 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010921 psu 2018-01-23T00:14:52.253Z,1516666492.253 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:14:53.226Z,1516666493.226 [NAL9602](INFO): NAL9602 initialized 2018-01-23T00:14:53.452Z,1516666493.452 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010921 psu 2018-01-23T00:14:53.453Z,1516666493.453 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:14:54.081Z,1516666494.081 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010922 psu 2018-01-23T00:14:54.082Z,1516666494.082 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:14:55.284Z,1516666495.284 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010922 psu 2018-01-23T00:14:55.285Z,1516666495.285 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:14:56.072Z,1516666496.072 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010922 psu 2018-01-23T00:14:56.074Z,1516666496.074 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:14:57.272Z,1516666497.272 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010923 psu 2018-01-23T00:14:57.273Z,1516666497.273 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:14:58.472Z,1516666498.472 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010923 psu 2018-01-23T00:14:58.473Z,1516666498.473 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:14:59.062Z,1516666499.062 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010924 psu 2018-01-23T00:14:59.064Z,1516666499.064 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:15:00.264Z,1516666500.264 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010924 psu 2018-01-23T00:15:00.265Z,1516666500.265 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:15:01.464Z,1516666501.464 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010924 psu 2018-01-23T00:15:01.465Z,1516666501.465 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:15:02.067Z,1516666502.067 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010925 psu 2018-01-23T00:15:02.068Z,1516666502.068 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:15:02.164Z,1516666502.164 [CommandLine](IMPORTANT): got command set NAL9602.time_fix 1516666368.000000 second 2018-01-23T00:15:02.173Z,1516666502.173 [DriftOrDonutAtChlPeak:AbortDrift:B.AbortDrift](INFO): Received valid gps time fix: 1516666368.00. Resetting abort timer. 2018-01-23T00:15:02.504Z,1516666502.504 [DriftOrDonutAtChlPeak:MissionStart:NeedComms:E] Stopped 2018-01-23T00:15:02.505Z,1516666502.505 [DriftOrDonutAtChlPeak:MissionStart:NeedComms](INFO): Completed DriftOrDonutAtChlPeak:MissionStart:NeedComms 2018-01-23T00:15:02.505Z,1516666502.505 [DriftOrDonutAtChlPeak:MissionStart:NeedComms] Stopped 2018-01-23T00:15:02.505Z,1516666502.505 [DriftOrDonutAtChlPeak:MissionStart:NeedComms](DEBUG): Aggregate::uninitialize DriftOrDonutAtChlPeak:MissionStart:NeedComms 2018-01-23T00:15:02.505Z,1516666502.505 [DriftOrDonutAtChlPeak:MissionStart:NeedComms:B.GoToSurface] Stopped 2018-01-23T00:15:02.505Z,1516666502.505 [DriftOrDonutAtChlPeak:MissionStart:NeedComms:B.GoToSurface](DEBUG): Uninitialize GoToSurfaceComponent. 2018-01-23T00:15:02.894Z,1516666502.894 [DriftOrDonutAtChlPeak:MissionStart:MissionStartComms](INFO): Completed DriftOrDonutAtChlPeak:MissionStart:MissionStartComms 2018-01-23T00:15:02.894Z,1516666502.894 [DriftOrDonutAtChlPeak:MissionStart:MissionStartComms] Stopped 2018-01-23T00:15:02.895Z,1516666502.895 [DriftOrDonutAtChlPeak:MissionStart:MissionStartComms](DEBUG): Aggregate::uninitialize DriftOrDonutAtChlPeak:MissionStart:MissionStartComms 2018-01-23T00:15:02.895Z,1516666502.895 [DriftOrDonutAtChlPeak:MissionStart](INFO): Completed DriftOrDonutAtChlPeak:MissionStart 2018-01-23T00:15:02.895Z,1516666502.895 [DriftOrDonutAtChlPeak:MissionStart] Stopped 2018-01-23T00:15:02.895Z,1516666502.895 [DriftOrDonutAtChlPeak:MissionStart](DEBUG): Aggregate::uninitialize DriftOrDonutAtChlPeak:MissionStart 2018-01-23T00:15:02.895Z,1516666502.895 [DriftOrDonutAtChlPeak:FindHighChlLocation] Running Loop=1 2018-01-23T00:15:02.895Z,1516666502.895 [DriftOrDonutAtChlPeak:FindHighChlLocation](DEBUG): Aggregate::initialize DriftOrDonutAtChlPeak:FindHighChlLocation 2018-01-23T00:15:02.896Z,1516666502.896 [DriftOrDonutAtChlPeak:FindHighChlLocation:C.SetSpeed] Running Loop=1 2018-01-23T00:15:02.896Z,1516666502.896 [DriftOrDonutAtChlPeak:FindHighChlLocation:C.SetSpeed](DEBUG): Initialize. 2018-01-23T00:15:02.896Z,1516666502.896 [DriftOrDonutAtChlPeak:FindHighChlLocation:F.DepthEnvelope] Running Loop=1 2018-01-23T00:15:02.896Z,1516666502.896 [DriftOrDonutAtChlPeak:FindHighChlLocation:F.DepthEnvelope](DEBUG): Initialize DepthEnvelopeComponent. 2018-01-23T00:15:02.896Z,1516666502.896 [DriftOrDonutAtChlPeak:FindHighChlLocation:G.YoYo] Running Loop=1 2018-01-23T00:15:02.896Z,1516666502.897 [DriftOrDonutAtChlPeak:FindHighChlLocation:G.YoYo](DEBUG): Initialize YoYoComponent. 2018-01-23T00:15:02.897Z,1516666502.897 [DriftOrDonutAtChlPeak:FindHighChlLocation:H.Buoyancy] Running Loop=1 2018-01-23T00:15:02.897Z,1516666502.897 [DriftOrDonutAtChlPeak:FindHighChlLocation:H.Buoyancy](DEBUG): Initialize Buoyancy Component. 2018-01-23T00:15:02.897Z,1516666502.897 [DriftOrDonutAtChlPeak:FindHighChlLocation:B] Running Loop=1 2018-01-23T00:15:03.268Z,1516666503.268 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010925 psu 2018-01-23T00:15:03.269Z,1516666503.269 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:15:03.319Z,1516666503.319 [DriftOrDonutAtChlPeak:FindHighChlLocation:H.Buoyancy] Running Loop=1 2018-01-23T00:15:03.329Z,1516666503.329 [DriftOrDonutAtChlPeak:FindHighChlLocation:G.YoYo] Running Loop=1 2018-01-23T00:15:03.334Z,1516666503.334 [DriftOrDonutAtChlPeak:FindHighChlLocation:F.DepthEnvelope] Running Loop=1 2018-01-23T00:15:03.361Z,1516666503.361 [DriftOrDonutAtChlPeak:FindHighChlLocation:C.SetSpeed] Running Loop=1 2018-01-23T00:15:03.389Z,1516666503.389 [DriftOrDonutAtChlPeak:FindHighChlLocation:B] Stopped 2018-01-23T00:15:03.390Z,1516666503.390 [DriftOrDonutAtChlPeak:FindHighChlLocation:D] Running Loop=1 2018-01-23T00:15:03.708Z,1516666503.708 [DriftOrDonutAtChlPeak:FindHighChlLocation:D] Stopped 2018-01-23T00:15:03.708Z,1516666503.708 [DriftOrDonutAtChlPeak:FindHighChlLocation:E] Running Loop=1 2018-01-23T00:15:03.713Z,1516666503.713 [DriftOrDonutAtChlPeak:AbortDrift:B.AbortDrift](INFO): Received valid acoustic ping at time: 1516666496.00. Resetting abort timer. 2018-01-23T00:15:04.133Z,1516666504.133 [DriftOrDonutAtChlPeak:FindHighChlLocation:E] Stopped 2018-01-23T00:15:04.133Z,1516666504.133 [DriftOrDonutAtChlPeak:FindHighChlLocation:Lap] Running Loop=1 2018-01-23T00:15:04.133Z,1516666504.133 [DriftOrDonutAtChlPeak:FindHighChlLocation:Lap](DEBUG): Aggregate::initialize DriftOrDonutAtChlPeak:FindHighChlLocation:Lap 2018-01-23T00:15:04.133Z,1516666504.133 [DriftOrDonutAtChlPeak:FindHighChlLocation:Lap:Wpt1] Running Loop=1 2018-01-23T00:15:04.134Z,1516666504.134 [DriftOrDonutAtChlPeak:FindHighChlLocation:Lap:Wpt1](DEBUG): Aggregate::initialize DriftOrDonutAtChlPeak:FindHighChlLocation:Lap:Wpt1 2018-01-23T00:15:04.134Z,1516666504.134 [DriftOrDonutAtChlPeak:FindHighChlLocation:Lap:Wpt1:A.Waypoint] Running Loop=1 2018-01-23T00:15:04.134Z,1516666504.134 [DriftOrDonutAtChlPeak:FindHighChlLocation:Lap:Wpt1:A.Waypoint](DEBUG): Initialize WaypointComponent. 2018-01-23T00:15:04.468Z,1516666504.468 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010925 psu 2018-01-23T00:15:04.469Z,1516666504.469 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:15:04.477Z,1516666504.477 [DriftOrDonutAtChlPeak:FindHighChlLocation:Lap:Wpt1] Stopped 2018-01-23T00:15:04.477Z,1516666504.477 [DriftOrDonutAtChlPeak:FindHighChlLocation:Lap:Wpt1](DEBUG): Aggregate::uninitialize DriftOrDonutAtChlPeak:FindHighChlLocation:Lap:Wpt1 2018-01-23T00:15:04.477Z,1516666504.477 [DriftOrDonutAtChlPeak:FindHighChlLocation:Lap:Wpt1:A.Waypoint] Stopped 2018-01-23T00:15:04.477Z,1516666504.477 [DriftOrDonutAtChlPeak:FindHighChlLocation:Lap:Wpt1:A.Waypoint](DEBUG): Uninitialize WaypointComponent. 2018-01-23T00:15:04.477Z,1516666504.477 [DriftOrDonutAtChlPeak:FindHighChlLocation:Lap:Wpt2] Running Loop=1 2018-01-23T00:15:04.477Z,1516666504.477 [DriftOrDonutAtChlPeak:FindHighChlLocation:Lap:Wpt2](DEBUG): Aggregate::initialize DriftOrDonutAtChlPeak:FindHighChlLocation:Lap:Wpt2 2018-01-23T00:15:04.478Z,1516666504.478 [DriftOrDonutAtChlPeak:FindHighChlLocation:Lap:Wpt2:A.Waypoint] Running Loop=1 2018-01-23T00:15:04.478Z,1516666504.478 [DriftOrDonutAtChlPeak:FindHighChlLocation:Lap:Wpt2:A.Waypoint](DEBUG): Initialize WaypointComponent. 2018-01-23T00:15:04.880Z,1516666504.880 [DriftOrDonutAtChlPeak:FindHighChlLocation:Lap:Wpt2] Stopped 2018-01-23T00:15:04.881Z,1516666504.881 [DriftOrDonutAtChlPeak:FindHighChlLocation:Lap:Wpt2](DEBUG): Aggregate::uninitialize DriftOrDonutAtChlPeak:FindHighChlLocation:Lap:Wpt2 2018-01-23T00:15:04.881Z,1516666504.881 [DriftOrDonutAtChlPeak:FindHighChlLocation:Lap:Wpt2:A.Waypoint] Stopped 2018-01-23T00:15:04.881Z,1516666504.881 [DriftOrDonutAtChlPeak:FindHighChlLocation:Lap:Wpt2:A.Waypoint](DEBUG): Uninitialize WaypointComponent. 2018-01-23T00:15:04.881Z,1516666504.881 [DriftOrDonutAtChlPeak:FindHighChlLocation:Lap:Wpt3] Running Loop=1 2018-01-23T00:15:04.881Z,1516666504.881 [DriftOrDonutAtChlPeak:FindHighChlLocation:Lap:Wpt3](DEBUG): Aggregate::initialize DriftOrDonutAtChlPeak:FindHighChlLocation:Lap:Wpt3 2018-01-23T00:15:04.881Z,1516666504.881 [DriftOrDonutAtChlPeak:FindHighChlLocation:Lap:Wpt3:A.Waypoint] Running Loop=1 2018-01-23T00:15:04.881Z,1516666504.881 [DriftOrDonutAtChlPeak:FindHighChlLocation:Lap:Wpt3:A.Waypoint](DEBUG): Initialize WaypointComponent. 2018-01-23T00:15:05.070Z,1516666505.070 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010926 psu 2018-01-23T00:15:05.071Z,1516666505.071 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:15:05.296Z,1516666505.296 [DriftOrDonutAtChlPeak:FindHighChlLocation:Lap:Wpt3] Stopped 2018-01-23T00:15:05.297Z,1516666505.297 [DriftOrDonutAtChlPeak:FindHighChlLocation:Lap:Wpt3](DEBUG): Aggregate::uninitialize DriftOrDonutAtChlPeak:FindHighChlLocation:Lap:Wpt3 2018-01-23T00:15:05.297Z,1516666505.297 [DriftOrDonutAtChlPeak:FindHighChlLocation:Lap:Wpt3:A.Waypoint] Stopped 2018-01-23T00:15:05.297Z,1516666505.297 [DriftOrDonutAtChlPeak:FindHighChlLocation:Lap:Wpt3:A.Waypoint](DEBUG): Uninitialize WaypointComponent. 2018-01-23T00:15:05.297Z,1516666505.297 [DriftOrDonutAtChlPeak:FindHighChlLocation:Lap:Wpt4] Running Loop=1 2018-01-23T00:15:05.297Z,1516666505.297 [DriftOrDonutAtChlPeak:FindHighChlLocation:Lap:Wpt4](DEBUG): Aggregate::initialize DriftOrDonutAtChlPeak:FindHighChlLocation:Lap:Wpt4 2018-01-23T00:15:05.297Z,1516666505.297 [DriftOrDonutAtChlPeak:FindHighChlLocation:Lap:Wpt4:A.Waypoint] Running Loop=1 2018-01-23T00:15:05.297Z,1516666505.297 [DriftOrDonutAtChlPeak:FindHighChlLocation:Lap:Wpt4:A.Waypoint](DEBUG): Initialize WaypointComponent. 2018-01-23T00:15:05.715Z,1516666505.715 [DriftOrDonutAtChlPeak:FindHighChlLocation:Lap:Wpt4] Stopped 2018-01-23T00:15:05.716Z,1516666505.716 [DriftOrDonutAtChlPeak:FindHighChlLocation:Lap:Wpt4](DEBUG): Aggregate::uninitialize DriftOrDonutAtChlPeak:FindHighChlLocation:Lap:Wpt4 2018-01-23T00:15:05.716Z,1516666505.716 [DriftOrDonutAtChlPeak:FindHighChlLocation:Lap:Wpt4:A.Waypoint] Stopped 2018-01-23T00:15:05.716Z,1516666505.716 [DriftOrDonutAtChlPeak:FindHighChlLocation:Lap:Wpt4:A.Waypoint](DEBUG): Uninitialize WaypointComponent. 2018-01-23T00:15:05.716Z,1516666505.716 [DriftOrDonutAtChlPeak:FindHighChlLocation:Lap](INFO): Completed DriftOrDonutAtChlPeak:FindHighChlLocation:Lap 2018-01-23T00:15:05.716Z,1516666505.716 [DriftOrDonutAtChlPeak:FindHighChlLocation:Lap] Stopped 2018-01-23T00:15:05.716Z,1516666505.716 [DriftOrDonutAtChlPeak:FindHighChlLocation:Lap](DEBUG): Aggregate::uninitialize DriftOrDonutAtChlPeak:FindHighChlLocation:Lap 2018-01-23T00:15:05.716Z,1516666505.716 [DriftOrDonutAtChlPeak:FindHighChlLocation:SetSamplingLocationtoWaypoint1] Running Loop=1 2018-01-23T00:15:05.716Z,1516666505.716 [DriftOrDonutAtChlPeak:FindHighChlLocation:SetSamplingLocationtoWaypoint1](DEBUG): Aggregate::initialize DriftOrDonutAtChlPeak:FindHighChlLocation:SetSamplingLocationtoWaypoint1 2018-01-23T00:15:05.716Z,1516666505.716 [DriftOrDonutAtChlPeak:FindHighChlLocation:SetSamplingLocationtoWaypoint1:A] Running Loop=1 2018-01-23T00:15:06.104Z,1516666506.104 [DriftOrDonutAtChlPeak:FindHighChlLocation:SetSamplingLocationtoWaypoint1] Stopped 2018-01-23T00:15:06.104Z,1516666506.104 [DriftOrDonutAtChlPeak:FindHighChlLocation:SetSamplingLocationtoWaypoint1](DEBUG): Aggregate::uninitialize DriftOrDonutAtChlPeak:FindHighChlLocation:SetSamplingLocationtoWaypoint1 2018-01-23T00:15:06.104Z,1516666506.104 [DriftOrDonutAtChlPeak:FindHighChlLocation:SetSamplingLocationtoWaypoint1:A] Stopped 2018-01-23T00:15:06.104Z,1516666506.104 [DriftOrDonutAtChlPeak:FindHighChlLocation:SetSamplingLocationtoHiChlLocation] Running Loop=1 2018-01-23T00:15:06.105Z,1516666506.105 [DriftOrDonutAtChlPeak:FindHighChlLocation:SetSamplingLocationtoHiChlLocation](DEBUG): Aggregate::initialize DriftOrDonutAtChlPeak:FindHighChlLocation:SetSamplingLocationtoHiChlLocation 2018-01-23T00:15:06.105Z,1516666506.105 [DriftOrDonutAtChlPeak:FindHighChlLocation:SetSamplingLocationtoHiChlLocation:A] Running Loop=1 2018-01-23T00:15:06.273Z,1516666506.273 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010926 psu 2018-01-23T00:15:06.274Z,1516666506.274 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:15:06.503Z,1516666506.503 [DriftOrDonutAtChlPeak:FindHighChlLocation:SetSamplingLocationtoHiChlLocation] Stopped 2018-01-23T00:15:06.503Z,1516666506.503 [DriftOrDonutAtChlPeak:FindHighChlLocation:SetSamplingLocationtoHiChlLocation](DEBUG): Aggregate::uninitialize DriftOrDonutAtChlPeak:FindHighChlLocation:SetSamplingLocationtoHiChlLocation 2018-01-23T00:15:06.503Z,1516666506.503 [DriftOrDonutAtChlPeak:FindHighChlLocation:SetSamplingLocationtoHiChlLocation:A] Stopped 2018-01-23T00:15:06.504Z,1516666506.504 [DriftOrDonutAtChlPeak:FindHighChlLocation:CylinderYoYoAroundSamplingLocation] Running Loop=1 2018-01-23T00:15:06.504Z,1516666506.504 [DriftOrDonutAtChlPeak:FindHighChlLocation:CylinderYoYoAroundSamplingLocation](DEBUG): Aggregate::initialize DriftOrDonutAtChlPeak:FindHighChlLocation:CylinderYoYoAroundSamplingLocation 2018-01-23T00:15:06.504Z,1516666506.504 [DriftOrDonutAtChlPeak:FindHighChlLocation:CylinderYoYoAroundSamplingLocation:CylinderIfNonNaNLatLon] Running Loop=1 2018-01-23T00:15:06.504Z,1516666506.504 [DriftOrDonutAtChlPeak:FindHighChlLocation:CylinderYoYoAroundSamplingLocation:CylinderIfNonNaNLatLon](DEBUG): Aggregate::initialize DriftOrDonutAtChlPeak:FindHighChlLocation:CylinderYoYoAroundSamplingLocation:CylinderIfNonNaNLatLon 2018-01-23T00:15:06.504Z,1516666506.504 [DriftOrDonutAtChlPeak:FindHighChlLocation:CylinderYoYoAroundSamplingLocation:CylinderIfNonNaNLatLon:A] Running Loop=1 2018-01-23T00:15:06.907Z,1516666506.907 [DriftOrDonutAtChlPeak:FindHighChlLocation:CylinderYoYoAroundSamplingLocation:CylinderIfNonNaNLatLon] Stopped 2018-01-23T00:15:06.907Z,1516666506.907 [DriftOrDonutAtChlPeak:FindHighChlLocation:CylinderYoYoAroundSamplingLocation:CylinderIfNonNaNLatLon](DEBUG): Aggregate::uninitialize DriftOrDonutAtChlPeak:FindHighChlLocation:CylinderYoYoAroundSamplingLocation:CylinderIfNonNaNLatLon 2018-01-23T00:15:06.907Z,1516666506.907 [DriftOrDonutAtChlPeak:FindHighChlLocation:CylinderYoYoAroundSamplingLocation:CylinderIfNonNaNLatLon:A] Stopped 2018-01-23T00:15:06.908Z,1516666506.908 [DriftOrDonutAtChlPeak:FindHighChlLocation:CylinderYoYoAroundSamplingLocation](INFO): Completed DriftOrDonutAtChlPeak:FindHighChlLocation:CylinderYoYoAroundSamplingLocation 2018-01-23T00:15:06.908Z,1516666506.908 [DriftOrDonutAtChlPeak:FindHighChlLocation:CylinderYoYoAroundSamplingLocation] Stopped 2018-01-23T00:15:06.908Z,1516666506.908 [DriftOrDonutAtChlPeak:FindHighChlLocation:CylinderYoYoAroundSamplingLocation](DEBUG): Aggregate::uninitialize DriftOrDonutAtChlPeak:FindHighChlLocation:CylinderYoYoAroundSamplingLocation 2018-01-23T00:15:06.908Z,1516666506.908 [DriftOrDonutAtChlPeak:FindHighChlLocation:GoToCylinderCenter] Running Loop=1 2018-01-23T00:15:06.908Z,1516666506.908 [DriftOrDonutAtChlPeak:FindHighChlLocation:GoToCylinderCenter](DEBUG): Aggregate::initialize DriftOrDonutAtChlPeak:FindHighChlLocation:GoToCylinderCenter 2018-01-23T00:15:06.908Z,1516666506.908 [DriftOrDonutAtChlPeak:FindHighChlLocation:GoToCylinderCenter:A] Running Loop=1 2018-01-23T00:15:07.301Z,1516666507.301 [DriftOrDonutAtChlPeak:FindHighChlLocation:GoToCylinderCenter] Stopped 2018-01-23T00:15:07.301Z,1516666507.301 [DriftOrDonutAtChlPeak:FindHighChlLocation:GoToCylinderCenter](DEBUG): Aggregate::uninitialize DriftOrDonutAtChlPeak:FindHighChlLocation:GoToCylinderCenter 2018-01-23T00:15:07.301Z,1516666507.301 [DriftOrDonutAtChlPeak:FindHighChlLocation:GoToCylinderCenter:A] Stopped 2018-01-23T00:15:07.302Z,1516666507.302 [DriftOrDonutAtChlPeak:FindHighChlLocation:GoToSurfaceBeforeDiving] Running Loop=1 2018-01-23T00:15:07.302Z,1516666507.302 [DriftOrDonutAtChlPeak:FindHighChlLocation:GoToSurfaceBeforeDiving](DEBUG): Aggregate::initialize DriftOrDonutAtChlPeak:FindHighChlLocation:GoToSurfaceBeforeDiving 2018-01-23T00:15:07.472Z,1516666507.472 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010926 psu 2018-01-23T00:15:07.473Z,1516666507.473 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:15:07.716Z,1516666507.716 [DriftOrDonutAtChlPeak:FindHighChlLocation:NeedComms] Running Loop=1 2018-01-23T00:15:07.716Z,1516666507.716 [DriftOrDonutAtChlPeak:FindHighChlLocation:NeedComms](DEBUG): Aggregate::initialize DriftOrDonutAtChlPeak:FindHighChlLocation:NeedComms 2018-01-23T00:15:07.716Z,1516666507.716 [DriftOrDonutAtChlPeak:FindHighChlLocation:NeedComms:B.GoToSurface] Running Loop=1 2018-01-23T00:15:07.716Z,1516666507.716 [DriftOrDonutAtChlPeak:FindHighChlLocation:NeedComms:B.GoToSurface](DEBUG): Initialize GoToSurfaceComponent. 2018-01-23T00:15:07.717Z,1516666507.717 [DriftOrDonutAtChlPeak:FindHighChlLocation:NeedComms:B.GoToSurface](INFO): Received depth rate setting nan m/s. 2018-01-23T00:15:07.717Z,1516666507.717 [DriftOrDonutAtChlPeak:FindHighChlLocation:NeedComms:B.GoToSurface](INFO): Received pitch setting 19.999999 degrees. 2018-01-23T00:15:07.717Z,1516666507.717 [DriftOrDonutAtChlPeak:FindHighChlLocation:NeedComms:B.GoToSurface](INFO): Received speed setting 1.000000 m/s. 2018-01-23T00:15:07.718Z,1516666507.718 [DriftOrDonutAtChlPeak:FindHighChlLocation:NeedComms:B.GoToSurface](DEBUG): No pitch timeout specified. Using default value of 20.000000 seconds. 2018-01-23T00:15:07.718Z,1516666507.718 [DriftOrDonutAtChlPeak:FindHighChlLocation:NeedComms:B.GoToSurface](DEBUG): No surface timeout specified. Using default value of 1000.000000 seconds. 2018-01-23T00:15:07.718Z,1516666507.718 [DriftOrDonutAtChlPeak:FindHighChlLocation:NeedComms:A] Running Loop=1 2018-01-23T00:15:07.733Z,1516666507.733 [DriftOrDonutAtChlPeak:FindHighChlLocation:NeedComms:A](INFO): last time_fix was: 1516666368.000000 second since 1970/01/01T00:00:00Z 2018-01-23T00:15:07.735Z,1516666507.735 [DriftOrDonutAtChlPeak:FindHighChlLocation:NeedComms:A] Stopped 2018-01-23T00:15:08.077Z,1516666508.077 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010927 psu 2018-01-23T00:15:08.079Z,1516666508.079 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:15:08.102Z,1516666508.102 [DriftOrDonutAtChlPeak:FindHighChlLocation:NeedComms:C] Running Loop=1 2018-01-23T00:15:08.503Z,1516666508.503 [DriftOrDonutAtChlPeak:FindHighChlLocation:NeedComms:C](DEBUG): Initialize ReadDataComponent to sense time_fix 2018-01-23T00:15:09.280Z,1516666509.280 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010927 psu 2018-01-23T00:15:09.281Z,1516666509.281 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:15:10.480Z,1516666510.480 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010927 psu 2018-01-23T00:15:10.481Z,1516666510.481 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:15:11.079Z,1516666511.079 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010928 psu 2018-01-23T00:15:11.080Z,1516666511.080 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:15:12.280Z,1516666512.280 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010928 psu 2018-01-23T00:15:12.281Z,1516666512.281 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:15:13.482Z,1516666513.482 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010929 psu 2018-01-23T00:15:13.483Z,1516666513.483 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:15:14.085Z,1516666514.085 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010929 psu 2018-01-23T00:15:14.086Z,1516666514.086 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:15:15.004Z,1516666515.004 [CommandLine](IMPORTANT): got command show stack 2018-01-23T00:15:15.004Z,1516666515.004 [CommandLine](IMPORTANT): Behavior Stack: 2018-01-23T00:15:15.005Z,1516666515.005 [DriftOrDonutAtChlPeak:StandardEnvelopes](IMPORTANT): Priority 0: DriftOrDonutAtChlPeak:StandardEnvelopes:A.AltitudeEnvelope 2018-01-23T00:15:15.006Z,1516666515.006 [DriftOrDonutAtChlPeak:StandardEnvelopes](IMPORTANT): Priority 1: DriftOrDonutAtChlPeak:StandardEnvelopes:B.DepthEnvelope 2018-01-23T00:15:15.006Z,1516666515.006 [DriftOrDonutAtChlPeak:StandardEnvelopes](IMPORTANT): Priority 2: DriftOrDonutAtChlPeak:StandardEnvelopes:C.OffshoreEnvelope 2018-01-23T00:15:15.006Z,1516666515.006 [DriftOrDonutAtChlPeak:AbortDrift](IMPORTANT): Priority 3: DriftOrDonutAtChlPeak:AbortDrift:B.AbortDrift 2018-01-23T00:15:15.007Z,1516666515.007 [DriftOrDonutAtChlPeak](IMPORTANT): Priority 4: DriftOrDonutAtChlPeak:H.Pitch 2018-01-23T00:15:15.008Z,1516666515.008 [DriftOrDonutAtChlPeak:Science](IMPORTANT): Priority 5: DriftOrDonutAtChlPeak:Science:A 2018-01-23T00:15:15.008Z,1516666515.008 [DriftOrDonutAtChlPeak:Science](IMPORTANT): Priority 6: DriftOrDonutAtChlPeak:Science:C 2018-01-23T00:15:15.008Z,1516666515.008 [DriftOrDonutAtChlPeak:Science](IMPORTANT): Priority 7: DriftOrDonutAtChlPeak:Science:D 2018-01-23T00:15:15.008Z,1516666515.008 [DriftOrDonutAtChlPeak:Science](IMPORTANT): Priority 8: DriftOrDonutAtChlPeak:Science:G 2018-01-23T00:15:15.009Z,1516666515.009 [DriftOrDonutAtChlPeak:Science](IMPORTANT): Priority 9: DriftOrDonutAtChlPeak:Science:H 2018-01-23T00:15:15.009Z,1516666515.009 [DriftOrDonutAtChlPeak:Science:PeakDetectChl](IMPORTANT): Priority 10: DriftOrDonutAtChlPeak:Science:PeakDetectChl:A.PeakDetectVsDepth 2018-01-23T00:15:15.009Z,1516666515.009 [DriftOrDonutAtChlPeak:Science:HighestChlPeakReport](IMPORTANT): Priority 11: DriftOrDonutAtChlPeak:Science:HighestChlPeakReport:A.PeakDetectHorizontal 2018-01-23T00:15:15.010Z,1516666515.010 [DriftOrDonutAtChlPeak](IMPORTANT): Priority 12: DriftOrDonutAtChlPeak:J.AltitudeEnvelope 2018-01-23T00:15:15.010Z,1516666515.010 [DriftOrDonutAtChlPeak:FindHighChlLocation:NeedComms](IMPORTANT): Priority 13: DriftOrDonutAtChlPeak:FindHighChlLocation:NeedComms:B.GoToSurface 2018-01-23T00:15:15.011Z,1516666515.011 [DriftOrDonutAtChlPeak:FindHighChlLocation:NeedComms](IMPORTANT): Priority 14: DriftOrDonutAtChlPeak:FindHighChlLocation:NeedComms:C 2018-01-23T00:15:15.011Z,1516666515.011 [DriftOrDonutAtChlPeak:FindHighChlLocation](IMPORTANT): Priority 15: DriftOrDonutAtChlPeak:FindHighChlLocation:C.SetSpeed 2018-01-23T00:15:15.011Z,1516666515.011 [DriftOrDonutAtChlPeak:FindHighChlLocation](IMPORTANT): Priority 16: DriftOrDonutAtChlPeak:FindHighChlLocation:F.DepthEnvelope 2018-01-23T00:15:15.012Z,1516666515.012 [DriftOrDonutAtChlPeak:FindHighChlLocation](IMPORTANT): Priority 17: DriftOrDonutAtChlPeak:FindHighChlLocation:G.YoYo 2018-01-23T00:15:15.012Z,1516666515.012 [DriftOrDonutAtChlPeak:FindHighChlLocation](IMPORTANT): Priority 18: DriftOrDonutAtChlPeak:FindHighChlLocation:H.Buoyancy 2018-01-23T00:15:15.288Z,1516666515.288 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010929 psu 2018-01-23T00:15:15.289Z,1516666515.289 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:15:15.650Z,1516666515.650 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:15:16.049Z,1516666516.049 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:15:16.446Z,1516666516.446 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:15:16.488Z,1516666516.488 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010930 psu 2018-01-23T00:15:16.489Z,1516666516.489 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:15:16.863Z,1516666516.863 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:15:17.088Z,1516666517.088 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010930 psu 2018-01-23T00:15:17.089Z,1516666517.089 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:15:17.269Z,1516666517.269 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:15:17.659Z,1516666517.659 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:15:18.076Z,1516666518.076 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:15:18.288Z,1516666518.288 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010930 psu 2018-01-23T00:15:18.289Z,1516666518.289 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:15:18.451Z,1516666518.451 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:15:18.856Z,1516666518.856 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:15:19.251Z,1516666519.251 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:15:19.488Z,1516666519.488 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010931 psu 2018-01-23T00:15:19.489Z,1516666519.489 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:15:19.645Z,1516666519.645 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:15:20.042Z,1516666520.042 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:15:20.093Z,1516666520.093 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010931 psu 2018-01-23T00:15:20.094Z,1516666520.094 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:15:20.450Z,1516666520.450 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:15:20.854Z,1516666520.854 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:15:21.255Z,1516666521.255 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:15:21.292Z,1516666521.292 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010931 psu 2018-01-23T00:15:21.293Z,1516666521.293 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:15:21.663Z,1516666521.663 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:15:22.071Z,1516666522.071 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:15:22.461Z,1516666522.461 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:15:22.492Z,1516666522.492 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010932 psu 2018-01-23T00:15:22.493Z,1516666522.493 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:15:22.870Z,1516666522.870 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:15:23.097Z,1516666523.097 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010932 psu 2018-01-23T00:15:23.098Z,1516666523.098 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:15:23.266Z,1516666523.266 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:15:23.650Z,1516666523.650 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:15:24.054Z,1516666524.054 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:15:24.299Z,1516666524.299 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010932 psu 2018-01-23T00:15:24.300Z,1516666524.300 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:15:24.452Z,1516666524.452 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:15:24.862Z,1516666524.862 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:15:25.257Z,1516666525.257 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:15:25.500Z,1516666525.500 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010933 psu 2018-01-23T00:15:25.501Z,1516666525.501 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:15:25.661Z,1516666525.661 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:15:26.053Z,1516666526.053 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:15:26.102Z,1516666526.102 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010933 psu 2018-01-23T00:15:26.103Z,1516666526.103 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:15:26.445Z,1516666526.445 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:15:26.839Z,1516666526.839 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:15:27.272Z,1516666527.272 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:15:27.304Z,1516666527.304 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010934 psu 2018-01-23T00:15:27.305Z,1516666527.305 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:15:27.661Z,1516666527.661 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:15:28.070Z,1516666528.070 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:15:28.088Z,1516666528.088 [CommandLine](IMPORTANT): got command get platform_buoyancy_position 2018-01-23T00:15:28.089Z,1516666528.089 [CommandLine](IMPORTANT): platform_buoyancy_position 950.162474 cc 2018-01-23T00:15:28.170Z,1516666528.170 [DriftOrDonutAtChlPeak:AbortDrift:B.AbortDrift](INFO): Received valid acoustic ping at time: 1516666496.00. Resetting abort timer. 2018-01-23T00:15:28.468Z,1516666528.468 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:15:28.504Z,1516666528.504 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010934 psu 2018-01-23T00:15:28.505Z,1516666528.505 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:15:28.852Z,1516666528.852 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:15:29.106Z,1516666529.106 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010934 psu 2018-01-23T00:15:29.108Z,1516666529.108 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:15:29.256Z,1516666529.256 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:15:29.652Z,1516666529.652 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:15:30.049Z,1516666530.049 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:15:30.308Z,1516666530.308 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010934 psu 2018-01-23T00:15:30.309Z,1516666530.309 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:15:30.458Z,1516666530.458 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:15:30.857Z,1516666530.857 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:15:31.257Z,1516666531.257 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:15:31.508Z,1516666531.508 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010935 psu 2018-01-23T00:15:31.509Z,1516666531.509 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:15:31.643Z,1516666531.643 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:15:32.042Z,1516666532.042 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:15:32.111Z,1516666532.111 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010935 psu 2018-01-23T00:15:32.112Z,1516666532.112 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:15:32.467Z,1516666532.467 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:15:32.867Z,1516666532.867 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:15:33.267Z,1516666533.267 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:15:33.313Z,1516666533.313 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010936 psu 2018-01-23T00:15:33.314Z,1516666533.314 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:15:33.665Z,1516666533.665 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:15:34.061Z,1516666534.061 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:15:34.448Z,1516666534.448 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:15:34.517Z,1516666534.517 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010936 psu 2018-01-23T00:15:34.518Z,1516666534.518 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:15:34.848Z,1516666534.848 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:15:35.116Z,1516666535.116 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010967 psu 2018-01-23T00:15:35.117Z,1516666535.117 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:15:35.253Z,1516666535.253 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:15:35.367Z,1516666535.367 [CBIT](DEBUG): EFC running - data check-sum false 2018-01-23T00:15:35.652Z,1516666535.652 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:15:36.053Z,1516666536.053 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:15:36.316Z,1516666536.316 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010937 psu 2018-01-23T00:15:36.317Z,1516666536.317 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:15:36.458Z,1516666536.458 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:15:36.857Z,1516666536.857 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:15:37.241Z,1516666537.241 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:15:37.516Z,1516666537.516 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010937 psu 2018-01-23T00:15:37.517Z,1516666537.517 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:15:37.666Z,1516666537.666 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:15:38.067Z,1516666538.067 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:15:38.120Z,1516666538.120 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010937 psu 2018-01-23T00:15:38.122Z,1516666538.122 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:15:38.459Z,1516666538.459 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:15:38.873Z,1516666538.873 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:15:39.320Z,1516666539.320 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010937 psu 2018-01-23T00:15:39.321Z,1516666539.321 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:15:40.520Z,1516666540.520 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010938 psu 2018-01-23T00:15:40.521Z,1516666540.521 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:15:41.125Z,1516666541.125 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010938 psu 2018-01-23T00:15:41.126Z,1516666541.126 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:15:42.329Z,1516666542.329 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010938 psu 2018-01-23T00:15:42.330Z,1516666542.330 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:15:42.565Z,1516666542.565 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:15:42.742Z,1516666542.742 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:15:43.150Z,1516666543.150 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:15:43.528Z,1516666543.528 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010939 psu 2018-01-23T00:15:43.529Z,1516666543.529 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:15:43.539Z,1516666543.539 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:15:43.927Z,1516666543.927 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:15:44.130Z,1516666544.130 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010939 psu 2018-01-23T00:15:44.131Z,1516666544.131 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:15:44.332Z,1516666544.332 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:15:44.725Z,1516666544.725 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:15:45.162Z,1516666545.162 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:15:45.332Z,1516666545.332 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010940 psu 2018-01-23T00:15:45.333Z,1516666545.333 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:15:45.516Z,1516666545.516 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:15:45.926Z,1516666545.926 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:15:46.063Z,1516666546.063 [CommandLine](IMPORTANT): got command get platform_buoyancy_position 2018-01-23T00:15:46.064Z,1516666546.064 [CommandLine](IMPORTANT): platform_buoyancy_position 950.162474 cc 2018-01-23T00:15:46.321Z,1516666546.321 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:15:46.532Z,1516666546.532 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010940 psu 2018-01-23T00:15:46.533Z,1516666546.533 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:15:46.729Z,1516666546.729 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:15:47.135Z,1516666547.135 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010940 psu 2018-01-23T00:15:47.136Z,1516666547.136 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:15:47.145Z,1516666547.145 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:15:47.548Z,1516666547.548 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:15:47.940Z,1516666547.940 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:15:48.340Z,1516666548.340 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010941 psu 2018-01-23T00:15:48.341Z,1516666548.341 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:15:48.343Z,1516666548.343 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:15:48.739Z,1516666548.739 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:15:49.148Z,1516666549.148 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:15:49.522Z,1516666549.522 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:15:49.540Z,1516666549.540 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010941 psu 2018-01-23T00:15:49.541Z,1516666549.541 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:15:49.934Z,1516666549.934 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:15:50.059Z,1516666550.059 [CommandLine](IMPORTANT): got command show stack 2018-01-23T00:15:50.059Z,1516666550.059 [CommandLine](IMPORTANT): Behavior Stack: 2018-01-23T00:15:50.060Z,1516666550.060 [DriftOrDonutAtChlPeak:StandardEnvelopes](IMPORTANT): Priority 0: DriftOrDonutAtChlPeak:StandardEnvelopes:A.AltitudeEnvelope 2018-01-23T00:15:50.061Z,1516666550.061 [DriftOrDonutAtChlPeak:StandardEnvelopes](IMPORTANT): Priority 1: DriftOrDonutAtChlPeak:StandardEnvelopes:B.DepthEnvelope 2018-01-23T00:15:50.061Z,1516666550.061 [DriftOrDonutAtChlPeak:StandardEnvelopes](IMPORTANT): Priority 2: DriftOrDonutAtChlPeak:StandardEnvelopes:C.OffshoreEnvelope 2018-01-23T00:15:50.061Z,1516666550.061 [DriftOrDonutAtChlPeak:AbortDrift](IMPORTANT): Priority 3: DriftOrDonutAtChlPeak:AbortDrift:B.AbortDrift 2018-01-23T00:15:50.062Z,1516666550.062 [DriftOrDonutAtChlPeak](IMPORTANT): Priority 4: DriftOrDonutAtChlPeak:H.Pitch 2018-01-23T00:15:50.063Z,1516666550.063 [DriftOrDonutAtChlPeak:Science](IMPORTANT): Priority 5: DriftOrDonutAtChlPeak:Science:A 2018-01-23T00:15:50.063Z,1516666550.063 [DriftOrDonutAtChlPeak:Science](IMPORTANT): Priority 6: DriftOrDonutAtChlPeak:Science:C 2018-01-23T00:15:50.063Z,1516666550.063 [DriftOrDonutAtChlPeak:Science](IMPORTANT): Priority 7: DriftOrDonutAtChlPeak:Science:D 2018-01-23T00:15:50.064Z,1516666550.064 [DriftOrDonutAtChlPeak:Science](IMPORTANT): Priority 8: DriftOrDonutAtChlPeak:Science:G 2018-01-23T00:15:50.064Z,1516666550.064 [DriftOrDonutAtChlPeak:Science](IMPORTANT): Priority 9: DriftOrDonutAtChlPeak:Science:H 2018-01-23T00:15:50.064Z,1516666550.064 [DriftOrDonutAtChlPeak:Science:PeakDetectChl](IMPORTANT): Priority 10: DriftOrDonutAtChlPeak:Science:PeakDetectChl:A.PeakDetectVsDepth 2018-01-23T00:15:50.064Z,1516666550.064 [DriftOrDonutAtChlPeak:Science:HighestChlPeakReport](IMPORTANT): Priority 11: DriftOrDonutAtChlPeak:Science:HighestChlPeakReport:A.PeakDetectHorizontal 2018-01-23T00:15:50.065Z,1516666550.065 [DriftOrDonutAtChlPeak](IMPORTANT): Priority 12: DriftOrDonutAtChlPeak:J.AltitudeEnvelope 2018-01-23T00:15:50.065Z,1516666550.065 [DriftOrDonutAtChlPeak:FindHighChlLocation:NeedComms](IMPORTANT): Priority 13: DriftOrDonutAtChlPeak:FindHighChlLocation:NeedComms:B.GoToSurface 2018-01-23T00:15:50.065Z,1516666550.065 [DriftOrDonutAtChlPeak:FindHighChlLocation:NeedComms](IMPORTANT): Priority 14: DriftOrDonutAtChlPeak:FindHighChlLocation:NeedComms:C 2018-01-23T00:15:50.066Z,1516666550.066 [DriftOrDonutAtChlPeak:FindHighChlLocation](IMPORTANT): Priority 15: DriftOrDonutAtChlPeak:FindHighChlLocation:C.SetSpeed 2018-01-23T00:15:50.066Z,1516666550.066 [DriftOrDonutAtChlPeak:FindHighChlLocation](IMPORTANT): Priority 16: DriftOrDonutAtChlPeak:FindHighChlLocation:F.DepthEnvelope 2018-01-23T00:15:50.066Z,1516666550.066 [DriftOrDonutAtChlPeak:FindHighChlLocation](IMPORTANT): Priority 17: DriftOrDonutAtChlPeak:FindHighChlLocation:G.YoYo 2018-01-23T00:15:50.067Z,1516666550.067 [DriftOrDonutAtChlPeak:FindHighChlLocation](IMPORTANT): Priority 18: DriftOrDonutAtChlPeak:FindHighChlLocation:H.Buoyancy 2018-01-23T00:15:50.141Z,1516666550.141 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010941 psu 2018-01-23T00:15:50.142Z,1516666550.142 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:15:50.318Z,1516666550.318 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:15:50.733Z,1516666550.733 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:15:51.149Z,1516666551.149 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:15:51.340Z,1516666551.340 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010942 psu 2018-01-23T00:15:51.341Z,1516666551.341 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:15:51.539Z,1516666551.539 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:15:51.940Z,1516666551.940 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:15:52.326Z,1516666552.326 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:15:52.541Z,1516666552.541 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010942 psu 2018-01-23T00:15:52.542Z,1516666552.542 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:15:52.735Z,1516666552.735 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:15:52.790Z,1516666552.790 [DriftOrDonutAtChlPeak:AbortDrift:B.AbortDrift](INFO): Received valid acoustic ping at time: 1516666496.00. Resetting abort timer. 2018-01-23T00:15:53.144Z,1516666553.144 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010943 psu 2018-01-23T00:15:53.145Z,1516666553.145 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:15:53.146Z,1516666553.146 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:15:53.544Z,1516666553.544 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:15:53.947Z,1516666553.947 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:15:54.333Z,1516666554.333 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:15:54.345Z,1516666554.345 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010943 psu 2018-01-23T00:15:54.346Z,1516666554.346 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:15:54.733Z,1516666554.733 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:15:55.136Z,1516666555.136 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:15:55.518Z,1516666555.518 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:15:55.544Z,1516666555.544 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010943 psu 2018-01-23T00:15:55.545Z,1516666555.545 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:15:55.925Z,1516666555.925 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:15:56.148Z,1516666556.148 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010943 psu 2018-01-23T00:15:56.149Z,1516666556.149 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:15:56.320Z,1516666556.320 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:15:56.729Z,1516666556.729 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:15:57.140Z,1516666557.140 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:15:57.348Z,1516666557.348 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010944 psu 2018-01-23T00:15:57.349Z,1516666557.349 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:15:57.532Z,1516666557.532 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:15:57.943Z,1516666557.943 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:15:58.342Z,1516666558.342 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:15:58.548Z,1516666558.548 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010944 psu 2018-01-23T00:15:58.549Z,1516666558.549 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:15:58.757Z,1516666558.757 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:15:59.153Z,1516666559.153 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010945 psu 2018-01-23T00:15:59.155Z,1516666559.155 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:15:59.156Z,1516666559.156 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:15:59.522Z,1516666559.522 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:15:59.924Z,1516666559.924 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:16:00.328Z,1516666560.328 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:16:00.356Z,1516666560.356 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010945 psu 2018-01-23T00:16:00.357Z,1516666560.357 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:16:00.732Z,1516666560.732 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:16:01.140Z,1516666561.140 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:16:01.527Z,1516666561.527 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:16:01.560Z,1516666561.560 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010945 psu 2018-01-23T00:16:01.561Z,1516666561.561 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:16:01.932Z,1516666561.932 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:16:02.157Z,1516666562.157 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010946 psu 2018-01-23T00:16:02.158Z,1516666562.158 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:16:02.335Z,1516666562.335 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:16:02.721Z,1516666562.721 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:16:02.722Z,1516666562.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:16:03.154Z,1516666563.154 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:16:03.156Z,1516666563.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:16:03.360Z,1516666563.360 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010946 psu 2018-01-23T00:16:03.361Z,1516666563.361 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:16:03.547Z,1516666563.547 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:16:03.548Z,1516666563.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:16:03.932Z,1516666563.932 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:16:03.933Z,1516666563.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:16:04.337Z,1516666564.337 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:16:04.338Z,1516666564.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:16:04.560Z,1516666564.560 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010946 psu 2018-01-23T00:16:04.561Z,1516666564.561 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:16:04.722Z,1516666564.722 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:16:04.731Z,1516666564.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:16:05.156Z,1516666565.156 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:16:05.158Z,1516666565.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:16:05.162Z,1516666565.162 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010947 psu 2018-01-23T00:16:05.163Z,1516666565.163 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:16:05.526Z,1516666565.526 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:16:05.527Z,1516666565.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:16:05.921Z,1516666565.921 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:16:05.922Z,1516666565.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:16:06.323Z,1516666566.323 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:16:06.324Z,1516666566.324 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:16:06.364Z,1516666566.364 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010947 psu 2018-01-23T00:16:06.365Z,1516666566.365 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:16:06.728Z,1516666566.728 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:16:06.729Z,1516666566.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:16:07.133Z,1516666567.133 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:16:07.135Z,1516666567.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:16:07.530Z,1516666567.530 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:16:07.531Z,1516666567.531 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:16:07.564Z,1516666567.564 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010947 psu 2018-01-23T00:16:07.565Z,1516666567.565 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:16:07.931Z,1516666567.931 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:16:07.932Z,1516666567.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:16:08.194Z,1516666568.194 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010948 psu 2018-01-23T00:16:08.196Z,1516666568.196 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:16:08.343Z,1516666568.343 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:16:08.344Z,1516666568.344 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:16:08.735Z,1516666568.735 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:16:08.736Z,1516666568.736 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:16:09.154Z,1516666569.154 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:16:09.156Z,1516666569.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:16:09.396Z,1516666569.396 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010948 psu 2018-01-23T00:16:09.397Z,1516666569.397 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:16:09.543Z,1516666569.543 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:16:09.544Z,1516666569.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:16:09.928Z,1516666569.928 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:16:09.929Z,1516666569.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:16:10.171Z,1516666570.171 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010948 psu 2018-01-23T00:16:10.172Z,1516666570.172 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:16:10.333Z,1516666570.333 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:16:10.334Z,1516666570.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:16:10.725Z,1516666570.725 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:16:10.727Z,1516666570.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:16:11.127Z,1516666571.127 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:16:11.129Z,1516666571.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:16:11.372Z,1516666571.372 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010948 psu 2018-01-23T00:16:11.373Z,1516666571.373 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:16:11.518Z,1516666571.518 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:16:11.519Z,1516666571.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:16:11.927Z,1516666571.927 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:16:11.928Z,1516666571.928 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:16:12.335Z,1516666572.335 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:16:12.336Z,1516666572.336 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:16:12.572Z,1516666572.572 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010949 psu 2018-01-23T00:16:12.573Z,1516666572.573 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:16:12.725Z,1516666572.725 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:16:12.726Z,1516666572.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:16:13.125Z,1516666573.125 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:16:13.126Z,1516666573.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:16:13.174Z,1516666573.174 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010949 psu 2018-01-23T00:16:13.175Z,1516666573.175 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:16:13.535Z,1516666573.535 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:16:13.536Z,1516666573.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:16:13.936Z,1516666573.936 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:16:13.937Z,1516666573.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:16:14.339Z,1516666574.339 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:16:14.340Z,1516666574.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:16:14.376Z,1516666574.376 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010950 psu 2018-01-23T00:16:14.377Z,1516666574.377 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:16:14.743Z,1516666574.743 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:16:14.744Z,1516666574.744 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:16:15.130Z,1516666575.130 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:16:15.131Z,1516666575.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:16:15.529Z,1516666575.529 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:16:15.530Z,1516666575.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:16:15.576Z,1516666575.576 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010950 psu 2018-01-23T00:16:15.577Z,1516666575.577 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:16:15.930Z,1516666575.930 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:16:15.931Z,1516666575.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:16:16.179Z,1516666576.179 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010950 psu 2018-01-23T00:16:16.180Z,1516666576.180 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:16:16.342Z,1516666576.342 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:16:16.343Z,1516666576.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:16:16.720Z,1516666576.720 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:16:16.721Z,1516666576.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:16:17.124Z,1516666577.124 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:16:17.125Z,1516666577.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:16:17.380Z,1516666577.380 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010950 psu 2018-01-23T00:16:17.381Z,1516666577.381 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:16:17.521Z,1516666577.521 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:16:17.522Z,1516666577.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:16:17.938Z,1516666577.938 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:16:17.939Z,1516666577.939 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:16:18.323Z,1516666578.323 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:16:18.325Z,1516666578.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:16:18.580Z,1516666578.580 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010951 psu 2018-01-23T00:16:18.581Z,1516666578.581 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:16:18.730Z,1516666578.730 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:16:18.732Z,1516666578.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:16:19.137Z,1516666579.137 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:16:19.140Z,1516666579.140 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:16:19.187Z,1516666579.187 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010951 psu 2018-01-23T00:16:19.188Z,1516666579.188 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:16:19.549Z,1516666579.549 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:16:19.558Z,1516666579.558 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:16:19.589Z,1516666579.589 [DriftOrDonutAtChlPeak:AbortDrift:B.AbortDrift](INFO): Received valid acoustic ping at time: 1516666624.00. Resetting abort timer. 2018-01-23T00:16:19.939Z,1516666579.939 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:16:19.940Z,1516666579.940 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:16:20.329Z,1516666580.329 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:16:20.331Z,1516666580.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:16:20.397Z,1516666580.397 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010951 psu 2018-01-23T00:16:20.399Z,1516666580.399 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:16:20.731Z,1516666580.731 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:16:20.732Z,1516666580.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:16:21.123Z,1516666581.123 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:16:21.124Z,1516666581.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:16:21.187Z,1516666581.187 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010952 psu 2018-01-23T00:16:21.188Z,1516666581.188 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:16:21.524Z,1516666581.524 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:16:21.525Z,1516666581.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:16:21.930Z,1516666581.930 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:16:21.931Z,1516666581.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:16:22.326Z,1516666582.326 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:16:22.327Z,1516666582.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:16:22.388Z,1516666582.388 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010952 psu 2018-01-23T00:16:22.390Z,1516666582.390 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:16:22.737Z,1516666582.737 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:16:22.738Z,1516666582.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:16:23.132Z,1516666583.132 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:16:23.133Z,1516666583.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:16:23.531Z,1516666583.531 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:16:23.532Z,1516666583.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:16:23.590Z,1516666583.590 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010952 psu 2018-01-23T00:16:23.591Z,1516666583.591 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:16:23.944Z,1516666583.944 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:16:23.945Z,1516666583.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:16:24.191Z,1516666584.191 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010952 psu 2018-01-23T00:16:24.192Z,1516666584.192 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:16:24.331Z,1516666584.331 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:16:24.332Z,1516666584.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:16:24.745Z,1516666584.745 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:16:24.746Z,1516666584.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:16:25.136Z,1516666585.136 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:16:25.137Z,1516666585.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:16:25.392Z,1516666585.392 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010953 psu 2018-01-23T00:16:25.393Z,1516666585.393 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:16:25.531Z,1516666585.531 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:16:25.533Z,1516666585.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:16:25.927Z,1516666585.927 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:16:25.928Z,1516666585.928 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:16:26.329Z,1516666586.329 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:16:26.330Z,1516666586.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:16:26.592Z,1516666586.592 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010953 psu 2018-01-23T00:16:26.593Z,1516666586.593 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:16:26.717Z,1516666586.717 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:16:26.718Z,1516666586.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:16:27.124Z,1516666587.124 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:16:27.125Z,1516666587.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:16:27.196Z,1516666587.196 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010954 psu 2018-01-23T00:16:27.197Z,1516666587.197 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:16:27.544Z,1516666587.544 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:16:27.545Z,1516666587.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:16:27.927Z,1516666587.927 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:16:27.928Z,1516666587.928 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:16:28.324Z,1516666588.324 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:16:28.325Z,1516666588.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:16:28.396Z,1516666588.396 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010954 psu 2018-01-23T00:16:28.397Z,1516666588.397 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:16:28.731Z,1516666588.731 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:16:28.732Z,1516666588.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:16:29.139Z,1516666589.139 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:16:29.140Z,1516666589.140 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:16:29.540Z,1516666589.540 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:16:29.542Z,1516666589.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:16:29.597Z,1516666589.597 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010954 psu 2018-01-23T00:16:29.598Z,1516666589.598 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:16:29.939Z,1516666589.939 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:16:29.940Z,1516666589.940 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:16:30.201Z,1516666590.201 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010955 psu 2018-01-23T00:16:30.202Z,1516666590.202 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:16:30.352Z,1516666590.352 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:16:30.354Z,1516666590.354 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:16:30.723Z,1516666590.723 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:16:30.724Z,1516666590.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:16:31.127Z,1516666591.127 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:16:31.128Z,1516666591.128 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:16:31.400Z,1516666591.400 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010955 psu 2018-01-23T00:16:31.401Z,1516666591.401 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:16:31.537Z,1516666591.537 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:16:31.538Z,1516666591.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:16:31.933Z,1516666591.933 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:16:31.934Z,1516666591.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:16:32.339Z,1516666592.339 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:16:32.340Z,1516666592.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:16:32.601Z,1516666592.601 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010955 psu 2018-01-23T00:16:32.603Z,1516666592.603 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:16:32.730Z,1516666592.730 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:16:32.732Z,1516666592.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:16:33.122Z,1516666593.122 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:16:33.123Z,1516666593.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:16:33.205Z,1516666593.205 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010956 psu 2018-01-23T00:16:33.206Z,1516666593.206 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:16:33.524Z,1516666593.524 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:16:33.525Z,1516666593.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:16:33.927Z,1516666593.927 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:16:33.928Z,1516666593.928 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:16:34.339Z,1516666594.339 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:16:34.340Z,1516666594.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:16:34.408Z,1516666594.408 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010956 psu 2018-01-23T00:16:34.409Z,1516666594.409 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:16:34.744Z,1516666594.744 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:16:34.745Z,1516666594.745 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:16:35.135Z,1516666595.135 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:16:35.136Z,1516666595.136 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:16:35.539Z,1516666595.539 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:16:35.540Z,1516666595.540 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:16:35.608Z,1516666595.608 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010956 psu 2018-01-23T00:16:35.609Z,1516666595.609 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:16:35.924Z,1516666595.924 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:16:35.925Z,1516666595.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:16:36.210Z,1516666596.210 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010957 psu 2018-01-23T00:16:36.211Z,1516666596.211 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:16:36.328Z,1516666596.328 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:16:36.329Z,1516666596.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:16:36.728Z,1516666596.728 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:16:36.729Z,1516666596.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:16:37.127Z,1516666597.127 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:16:37.128Z,1516666597.128 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:16:37.412Z,1516666597.412 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010957 psu 2018-01-23T00:16:37.413Z,1516666597.413 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:16:37.534Z,1516666597.534 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:16:37.535Z,1516666597.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:16:37.932Z,1516666597.932 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:16:37.933Z,1516666597.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:16:38.332Z,1516666598.332 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:16:38.333Z,1516666598.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:16:38.612Z,1516666598.612 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010957 psu 2018-01-23T00:16:38.613Z,1516666598.613 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:16:38.724Z,1516666598.724 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:16:38.725Z,1516666598.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:16:39.141Z,1516666599.141 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:16:39.143Z,1516666599.143 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:16:39.214Z,1516666599.214 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010957 psu 2018-01-23T00:16:39.216Z,1516666599.216 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:16:40.416Z,1516666600.416 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010958 psu 2018-01-23T00:16:40.417Z,1516666600.417 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:16:41.616Z,1516666601.616 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010958 psu 2018-01-23T00:16:41.618Z,1516666601.618 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:16:42.219Z,1516666602.219 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010958 psu 2018-01-23T00:16:42.220Z,1516666602.220 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:16:42.855Z,1516666602.855 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:16:42.858Z,1516666602.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:16:43.049Z,1516666603.049 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:16:43.050Z,1516666603.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:16:43.421Z,1516666603.421 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010959 psu 2018-01-23T00:16:43.422Z,1516666603.422 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:16:43.464Z,1516666603.464 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:16:43.467Z,1516666603.467 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:16:43.856Z,1516666603.856 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:16:43.882Z,1516666603.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:16:43.953Z,1516666603.953 [DriftOrDonutAtChlPeak:AbortDrift:B.AbortDrift](INFO): Received valid acoustic ping at time: 1516666624.00. Resetting abort timer. 2018-01-23T00:16:44.253Z,1516666604.253 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:16:44.254Z,1516666604.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:16:44.624Z,1516666604.624 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010959 psu 2018-01-23T00:16:44.625Z,1516666604.625 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:16:44.662Z,1516666604.662 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:16:44.663Z,1516666604.663 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:16:45.051Z,1516666605.051 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:16:45.052Z,1516666605.052 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:16:45.224Z,1516666605.224 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010959 psu 2018-01-23T00:16:45.225Z,1516666605.225 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:16:45.432Z,1516666605.432 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:16:45.433Z,1516666605.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:16:45.842Z,1516666605.842 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:16:45.843Z,1516666605.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:16:46.250Z,1516666606.250 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:16:46.251Z,1516666606.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:16:46.424Z,1516666606.424 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010960 psu 2018-01-23T00:16:46.425Z,1516666606.425 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:16:46.643Z,1516666606.643 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:16:46.644Z,1516666606.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:16:47.044Z,1516666607.044 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:16:47.045Z,1516666607.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:16:47.443Z,1516666607.443 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:16:47.444Z,1516666607.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:16:47.624Z,1516666607.624 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010960 psu 2018-01-23T00:16:47.625Z,1516666607.625 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:16:47.860Z,1516666607.860 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:16:47.861Z,1516666607.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:16:48.228Z,1516666608.228 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010960 psu 2018-01-23T00:16:48.229Z,1516666608.229 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:16:48.258Z,1516666608.258 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:16:48.260Z,1516666608.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:16:48.650Z,1516666608.650 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:16:48.651Z,1516666608.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:16:49.050Z,1516666609.050 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:16:49.051Z,1516666609.051 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:16:49.428Z,1516666609.428 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010961 psu 2018-01-23T00:16:49.429Z,1516666609.429 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:16:49.445Z,1516666609.445 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:16:49.446Z,1516666609.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:16:49.828Z,1516666609.828 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:16:49.829Z,1516666609.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:16:50.256Z,1516666610.256 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:16:50.257Z,1516666610.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:16:50.630Z,1516666610.630 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010961 psu 2018-01-23T00:16:50.633Z,1516666610.633 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:16:50.644Z,1516666610.644 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:16:50.645Z,1516666610.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:16:51.044Z,1516666611.044 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:16:51.045Z,1516666611.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:16:51.233Z,1516666611.233 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010961 psu 2018-01-23T00:16:51.234Z,1516666611.234 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:16:51.444Z,1516666611.444 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:16:51.446Z,1516666611.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:16:51.845Z,1516666611.845 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:16:51.846Z,1516666611.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:16:52.255Z,1516666612.255 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:16:52.256Z,1516666612.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:16:52.433Z,1516666612.433 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010962 psu 2018-01-23T00:16:52.434Z,1516666612.434 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:16:52.628Z,1516666612.628 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:16:52.629Z,1516666612.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:16:53.056Z,1516666613.056 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:16:53.057Z,1516666613.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:16:53.449Z,1516666613.449 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:16:53.450Z,1516666613.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:16:53.636Z,1516666613.636 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010962 psu 2018-01-23T00:16:53.637Z,1516666613.637 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:16:53.860Z,1516666613.860 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:16:53.861Z,1516666613.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:16:54.244Z,1516666614.244 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010962 psu 2018-01-23T00:16:54.245Z,1516666614.245 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:16:54.266Z,1516666614.266 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:16:54.267Z,1516666614.267 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:16:54.633Z,1516666614.633 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:16:54.634Z,1516666614.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:16:55.032Z,1516666615.032 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:16:55.033Z,1516666615.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:16:55.428Z,1516666615.428 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:16:55.429Z,1516666615.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:16:55.444Z,1516666615.444 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010963 psu 2018-01-23T00:16:55.445Z,1516666615.445 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:16:55.833Z,1516666615.833 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:16:55.834Z,1516666615.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:16:56.262Z,1516666616.262 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:16:56.263Z,1516666616.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:16:56.633Z,1516666616.633 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:16:56.634Z,1516666616.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:16:56.644Z,1516666616.644 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010963 psu 2018-01-23T00:16:56.645Z,1516666616.645 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:16:57.025Z,1516666617.025 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:16:57.026Z,1516666617.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:16:57.243Z,1516666617.243 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010963 psu 2018-01-23T00:16:57.244Z,1516666617.244 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:16:57.433Z,1516666617.433 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:16:57.452Z,1516666617.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:16:57.830Z,1516666617.830 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:16:57.831Z,1516666617.831 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:16:58.262Z,1516666618.262 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:16:58.264Z,1516666618.264 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:16:58.444Z,1516666618.444 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010964 psu 2018-01-23T00:16:58.445Z,1516666618.445 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:16:58.668Z,1516666618.668 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:16:58.669Z,1516666618.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:16:59.060Z,1516666619.060 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:16:59.060Z,1516666619.060 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:16:59.460Z,1516666619.460 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:16:59.461Z,1516666619.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:16:59.645Z,1516666619.645 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010964 psu 2018-01-23T00:16:59.646Z,1516666619.646 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:16:59.824Z,1516666619.824 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:16:59.825Z,1516666619.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:17:00.248Z,1516666620.248 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:17:00.248Z,1516666620.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:17:00.268Z,1516666620.268 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010964 psu 2018-01-23T00:17:00.269Z,1516666620.269 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:17:00.629Z,1516666620.629 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:17:00.630Z,1516666620.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:17:01.044Z,1516666621.044 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:17:01.045Z,1516666621.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:17:01.447Z,1516666621.447 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:17:01.448Z,1516666621.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:17:01.468Z,1516666621.468 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010965 psu 2018-01-23T00:17:01.469Z,1516666621.469 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:17:01.846Z,1516666621.846 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:17:01.847Z,1516666621.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:17:02.233Z,1516666622.233 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:17:02.251Z,1516666622.251 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010965 psu 2018-01-23T00:17:02.252Z,1516666622.252 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:17:02.253Z,1516666622.253 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:17:02.645Z,1516666622.645 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:17:02.646Z,1516666622.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:17:03.034Z,1516666623.034 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:17:03.041Z,1516666623.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:17:03.453Z,1516666623.453 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010965 psu 2018-01-23T00:17:03.454Z,1516666623.454 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:17:03.457Z,1516666623.457 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:17:03.458Z,1516666623.458 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:17:03.861Z,1516666623.861 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:17:03.862Z,1516666623.862 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:17:04.279Z,1516666624.279 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:17:04.280Z,1516666624.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:17:04.645Z,1516666624.645 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:17:04.646Z,1516666624.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:17:04.652Z,1516666624.652 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010965 psu 2018-01-23T00:17:04.653Z,1516666624.653 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:17:05.042Z,1516666625.042 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:17:05.043Z,1516666625.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:17:05.255Z,1516666625.255 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010965 psu 2018-01-23T00:17:05.257Z,1516666625.257 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:17:05.425Z,1516666625.425 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:17:05.426Z,1516666625.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:17:05.828Z,1516666625.828 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:17:05.829Z,1516666625.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:17:06.255Z,1516666626.255 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:17:06.257Z,1516666626.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:17:06.456Z,1516666626.456 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010966 psu 2018-01-23T00:17:06.457Z,1516666626.457 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:17:06.629Z,1516666626.629 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:17:06.630Z,1516666626.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:17:07.042Z,1516666627.042 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:17:07.043Z,1516666627.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:17:07.440Z,1516666627.440 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:17:07.441Z,1516666627.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:17:07.656Z,1516666627.656 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010966 psu 2018-01-23T00:17:07.657Z,1516666627.657 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:17:07.841Z,1516666627.841 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:17:07.847Z,1516666627.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:17:08.231Z,1516666628.231 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:17:08.250Z,1516666628.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:17:08.260Z,1516666628.260 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010967 psu 2018-01-23T00:17:08.262Z,1516666628.262 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:17:08.665Z,1516666628.665 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:17:08.668Z,1516666628.668 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:17:09.048Z,1516666629.048 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:17:09.057Z,1516666629.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:17:09.112Z,1516666629.112 [DriftOrDonutAtChlPeak:AbortDrift:B.AbortDrift](INFO): Received valid acoustic ping at time: 1516666624.00. Resetting abort timer. 2018-01-23T00:17:09.460Z,1516666629.460 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010967 psu 2018-01-23T00:17:09.461Z,1516666629.461 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:17:09.461Z,1516666629.461 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:17:09.463Z,1516666629.463 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:17:09.860Z,1516666629.860 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:17:09.862Z,1516666629.862 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:17:10.229Z,1516666630.229 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:17:10.231Z,1516666630.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:17:10.640Z,1516666630.640 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:17:10.641Z,1516666630.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:17:10.668Z,1516666630.668 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010967 psu 2018-01-23T00:17:10.669Z,1516666630.669 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:17:11.045Z,1516666631.045 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:17:11.049Z,1516666631.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:17:11.264Z,1516666631.264 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010968 psu 2018-01-23T00:17:11.265Z,1516666631.265 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:17:11.430Z,1516666631.430 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:17:11.432Z,1516666631.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:17:11.847Z,1516666631.847 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:17:11.848Z,1516666631.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:17:12.250Z,1516666632.250 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:17:12.252Z,1516666632.252 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:17:12.464Z,1516666632.464 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010968 psu 2018-01-23T00:17:12.465Z,1516666632.465 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:17:12.624Z,1516666632.624 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:17:12.625Z,1516666632.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:17:13.041Z,1516666633.041 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:17:13.042Z,1516666633.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:17:13.447Z,1516666633.447 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:17:13.448Z,1516666633.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:17:13.664Z,1516666633.664 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010968 psu 2018-01-23T00:17:13.665Z,1516666633.665 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:17:13.849Z,1516666633.849 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:17:13.851Z,1516666633.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:17:14.264Z,1516666634.264 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:17:14.267Z,1516666634.267 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:17:14.272Z,1516666634.272 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010969 psu 2018-01-23T00:17:14.274Z,1516666634.274 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:17:14.659Z,1516666634.659 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:17:14.660Z,1516666634.660 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:17:15.053Z,1516666635.053 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:17:15.054Z,1516666635.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:17:15.428Z,1516666635.428 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:17:15.430Z,1516666635.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:17:15.473Z,1516666635.473 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010969 psu 2018-01-23T00:17:15.474Z,1516666635.474 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:17:15.841Z,1516666635.841 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:17:15.842Z,1516666635.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:17:16.230Z,1516666636.230 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:17:16.232Z,1516666636.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:17:16.271Z,1516666636.271 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010969 psu 2018-01-23T00:17:16.273Z,1516666636.273 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:17:16.650Z,1516666636.650 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:17:16.652Z,1516666636.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:17:17.026Z,1516666637.026 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:17:17.027Z,1516666637.027 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:17:17.429Z,1516666637.429 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:17:17.431Z,1516666637.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:17:17.473Z,1516666637.473 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010970 psu 2018-01-23T00:17:17.474Z,1516666637.474 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:17:17.844Z,1516666637.844 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:17:17.845Z,1516666637.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:17:18.233Z,1516666638.233 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:17:18.234Z,1516666638.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:17:18.643Z,1516666638.643 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:17:18.644Z,1516666638.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:17:18.676Z,1516666638.676 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010970 psu 2018-01-23T00:17:18.677Z,1516666638.677 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:17:19.055Z,1516666639.055 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:17:19.056Z,1516666639.056 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:17:19.276Z,1516666639.276 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010970 psu 2018-01-23T00:17:19.277Z,1516666639.277 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:17:19.461Z,1516666639.461 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:17:19.462Z,1516666639.462 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:17:19.853Z,1516666639.853 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:17:19.865Z,1516666639.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:17:20.253Z,1516666640.253 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:17:20.255Z,1516666640.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:17:20.476Z,1516666640.476 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010971 psu 2018-01-23T00:17:20.477Z,1516666640.477 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:17:20.634Z,1516666640.634 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:17:20.641Z,1516666640.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:17:21.031Z,1516666641.031 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:17:21.032Z,1516666641.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:17:21.426Z,1516666641.426 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:17:21.427Z,1516666641.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:17:21.676Z,1516666641.676 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010971 psu 2018-01-23T00:17:21.677Z,1516666641.677 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:17:21.828Z,1516666641.828 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:17:21.829Z,1516666641.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:17:22.241Z,1516666642.241 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:17:22.242Z,1516666642.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:17:22.283Z,1516666642.283 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010971 psu 2018-01-23T00:17:22.285Z,1516666642.285 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:17:22.649Z,1516666642.649 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:17:22.658Z,1516666642.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:17:23.046Z,1516666643.046 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:17:23.047Z,1516666643.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:17:23.449Z,1516666643.449 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:17:23.450Z,1516666643.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:17:23.484Z,1516666643.484 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010972 psu 2018-01-23T00:17:23.485Z,1516666643.485 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:17:23.828Z,1516666643.828 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:17:23.829Z,1516666643.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:17:24.261Z,1516666644.261 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:17:24.264Z,1516666644.264 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:17:24.659Z,1516666644.659 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:17:24.660Z,1516666644.660 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:17:24.685Z,1516666644.685 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010972 psu 2018-01-23T00:17:24.686Z,1516666644.686 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:17:25.053Z,1516666645.053 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:17:25.054Z,1516666645.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:17:25.285Z,1516666645.285 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010972 psu 2018-01-23T00:17:25.286Z,1516666645.286 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:17:25.456Z,1516666645.456 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:17:25.457Z,1516666645.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:17:25.844Z,1516666645.844 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:17:25.845Z,1516666645.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:17:26.247Z,1516666646.247 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:17:26.249Z,1516666646.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:17:26.485Z,1516666646.485 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010972 psu 2018-01-23T00:17:26.487Z,1516666646.487 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:17:26.629Z,1516666646.629 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:17:26.630Z,1516666646.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:17:27.030Z,1516666647.030 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:17:27.031Z,1516666647.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:17:27.430Z,1516666647.430 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:17:27.431Z,1516666647.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:17:27.689Z,1516666647.689 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010973 psu 2018-01-23T00:17:27.690Z,1516666647.690 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:17:27.833Z,1516666647.833 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:17:27.834Z,1516666647.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:17:28.244Z,1516666648.244 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:17:28.245Z,1516666648.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:17:28.290Z,1516666648.290 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010973 psu 2018-01-23T00:17:28.291Z,1516666648.291 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:17:28.624Z,1516666648.624 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:17:28.625Z,1516666648.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:17:29.030Z,1516666649.030 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:17:29.031Z,1516666649.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:17:29.453Z,1516666649.453 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:17:29.454Z,1516666649.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:17:29.493Z,1516666649.493 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010974 psu 2018-01-23T00:17:29.494Z,1516666649.494 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:17:29.860Z,1516666649.860 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:17:29.861Z,1516666649.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:17:30.257Z,1516666650.257 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:17:30.258Z,1516666650.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:17:30.644Z,1516666650.644 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:17:30.645Z,1516666650.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:17:30.692Z,1516666650.692 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010974 psu 2018-01-23T00:17:30.693Z,1516666650.693 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:17:31.047Z,1516666651.047 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:17:31.048Z,1516666651.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:17:31.294Z,1516666651.294 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010974 psu 2018-01-23T00:17:31.295Z,1516666651.295 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:17:31.450Z,1516666651.450 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:17:31.451Z,1516666651.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:17:31.854Z,1516666651.854 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:17:31.856Z,1516666651.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:17:32.232Z,1516666652.232 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:17:32.233Z,1516666652.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:17:32.496Z,1516666652.496 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010975 psu 2018-01-23T00:17:32.497Z,1516666652.497 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:17:32.634Z,1516666652.634 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:17:32.641Z,1516666652.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:17:33.032Z,1516666653.032 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:17:33.034Z,1516666653.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:17:33.445Z,1516666653.445 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:17:33.448Z,1516666653.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:17:33.696Z,1516666653.696 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010975 psu 2018-01-23T00:17:33.697Z,1516666653.697 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:17:33.842Z,1516666653.842 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:17:33.862Z,1516666653.862 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:17:33.929Z,1516666653.929 [DriftOrDonutAtChlPeak:AbortDrift:B.AbortDrift](INFO): Received valid acoustic ping at time: 1516666624.00. Resetting abort timer. 2018-01-23T00:17:34.229Z,1516666654.229 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:17:34.230Z,1516666654.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:17:34.299Z,1516666654.299 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010975 psu 2018-01-23T00:17:34.300Z,1516666654.300 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:17:34.660Z,1516666654.660 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:17:34.661Z,1516666654.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:17:35.057Z,1516666655.057 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:17:35.059Z,1516666655.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:17:35.445Z,1516666655.445 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:17:35.446Z,1516666655.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:17:35.500Z,1516666655.500 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010976 psu 2018-01-23T00:17:35.501Z,1516666655.501 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:17:35.871Z,1516666655.871 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:17:35.872Z,1516666655.872 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:17:36.227Z,1516666656.227 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:17:36.228Z,1516666656.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:17:36.625Z,1516666656.625 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:17:36.626Z,1516666656.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:17:36.700Z,1516666656.700 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010975 psu 2018-01-23T00:17:36.701Z,1516666656.701 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:17:37.029Z,1516666657.029 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:17:37.030Z,1516666657.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:17:37.304Z,1516666657.304 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010976 psu 2018-01-23T00:17:37.305Z,1516666657.305 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:17:37.445Z,1516666657.445 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:17:37.446Z,1516666657.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:17:37.829Z,1516666657.829 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:17:37.830Z,1516666657.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:17:38.229Z,1516666658.229 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:17:38.230Z,1516666658.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:17:38.504Z,1516666658.504 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010976 psu 2018-01-23T00:17:38.505Z,1516666658.505 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:17:38.650Z,1516666658.650 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:17:38.652Z,1516666658.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:17:38.691Z,1516666658.691 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = 0.000000, longitudeAccuracy_ = 0.000000, depthAccuracy_ = nan 2018-01-23T00:17:38.691Z,1516666658.691 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 1 2018-01-23T00:17:38.691Z,1516666658.691 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T00:17:38.783Z,1516666658.783 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T00:17:39.043Z,1516666659.043 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:17:39.044Z,1516666659.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:17:39.163Z,1516666659.163 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T00:17:39.163Z,1516666659.163 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 1 2018-01-23T00:17:39.434Z,1516666659.434 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:17:39.442Z,1516666659.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:17:39.480Z,1516666659.480 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T00:17:39.480Z,1516666659.480 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T00:17:39.481Z,1516666659.481 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T00:17:39.704Z,1516666659.704 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010977 psu 2018-01-23T00:17:39.705Z,1516666659.705 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:17:40.309Z,1516666660.309 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010977 psu 2018-01-23T00:17:40.310Z,1516666660.310 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:17:41.510Z,1516666661.510 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010977 psu 2018-01-23T00:17:41.511Z,1516666661.511 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:17:42.712Z,1516666662.712 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010978 psu 2018-01-23T00:17:42.713Z,1516666662.713 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:17:43.151Z,1516666663.151 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:17:43.152Z,1516666663.152 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:17:43.313Z,1516666663.313 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010978 psu 2018-01-23T00:17:43.315Z,1516666663.315 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:17:43.384Z,1516666663.384 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:17:43.385Z,1516666663.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:17:43.735Z,1516666663.735 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:17:43.736Z,1516666663.736 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:17:44.139Z,1516666664.139 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:17:44.140Z,1516666664.140 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:17:44.516Z,1516666664.516 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010978 psu 2018-01-23T00:17:44.517Z,1516666664.517 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:17:44.529Z,1516666664.529 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:17:44.530Z,1516666664.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:17:44.931Z,1516666664.931 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:17:44.932Z,1516666664.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:17:45.340Z,1516666665.340 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:17:45.341Z,1516666665.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:17:45.721Z,1516666665.721 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010978 psu 2018-01-23T00:17:45.723Z,1516666665.723 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:17:45.725Z,1516666665.725 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:17:45.726Z,1516666665.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:17:46.136Z,1516666666.136 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:17:46.137Z,1516666666.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:17:46.318Z,1516666666.318 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010979 psu 2018-01-23T00:17:46.319Z,1516666666.319 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:17:46.520Z,1516666666.520 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:17:46.521Z,1516666666.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:17:46.924Z,1516666666.924 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:17:46.925Z,1516666666.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:17:47.339Z,1516666667.339 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:17:47.340Z,1516666667.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:17:47.521Z,1516666667.521 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010979 psu 2018-01-23T00:17:47.522Z,1516666667.522 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:17:47.730Z,1516666667.730 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:17:47.731Z,1516666667.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:17:48.144Z,1516666668.144 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:17:48.146Z,1516666668.146 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:17:48.548Z,1516666668.548 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:17:48.549Z,1516666668.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:17:48.720Z,1516666668.720 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010980 psu 2018-01-23T00:17:48.721Z,1516666668.721 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:17:48.956Z,1516666668.956 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:17:48.957Z,1516666668.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:17:49.322Z,1516666669.322 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010980 psu 2018-01-23T00:17:49.323Z,1516666669.323 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:17:49.372Z,1516666669.372 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:17:49.373Z,1516666669.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:17:49.729Z,1516666669.729 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:17:49.730Z,1516666669.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:17:50.138Z,1516666670.138 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:17:50.139Z,1516666670.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:17:50.525Z,1516666670.525 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010980 psu 2018-01-23T00:17:50.527Z,1516666670.527 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:17:50.536Z,1516666670.536 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:17:50.537Z,1516666670.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:17:50.920Z,1516666670.920 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:17:50.921Z,1516666670.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:17:51.344Z,1516666671.344 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:17:51.345Z,1516666671.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:17:51.733Z,1516666671.733 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010980 psu 2018-01-23T00:17:51.734Z,1516666671.734 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:17:51.735Z,1516666671.735 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:17:51.736Z,1516666671.736 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:17:52.137Z,1516666672.137 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:17:52.137Z,1516666672.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:17:52.327Z,1516666672.327 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010981 psu 2018-01-23T00:17:52.328Z,1516666672.328 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:17:52.533Z,1516666672.533 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:17:52.534Z,1516666672.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:17:52.920Z,1516666672.920 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:17:52.921Z,1516666672.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:17:53.348Z,1516666673.348 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:17:53.348Z,1516666673.348 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:17:53.528Z,1516666673.528 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010981 psu 2018-01-23T00:17:53.529Z,1516666673.529 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:17:53.735Z,1516666673.735 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:17:53.737Z,1516666673.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:17:54.143Z,1516666674.143 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:17:54.144Z,1516666674.144 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:17:54.543Z,1516666674.543 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:17:54.544Z,1516666674.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:17:54.728Z,1516666674.728 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010981 psu 2018-01-23T00:17:54.729Z,1516666674.729 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:17:54.924Z,1516666674.924 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:17:54.925Z,1516666674.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:17:55.331Z,1516666675.331 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010982 psu 2018-01-23T00:17:55.332Z,1516666675.332 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:17:55.354Z,1516666675.354 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:17:55.355Z,1516666675.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:17:55.736Z,1516666675.736 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:17:55.737Z,1516666675.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:17:56.136Z,1516666676.136 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:17:56.137Z,1516666676.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:17:56.520Z,1516666676.520 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:17:56.521Z,1516666676.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:17:56.532Z,1516666676.532 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010982 psu 2018-01-23T00:17:56.533Z,1516666676.533 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:17:56.929Z,1516666676.929 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:17:56.931Z,1516666676.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:17:57.353Z,1516666677.353 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:17:57.354Z,1516666677.354 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:17:57.732Z,1516666677.732 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010982 psu 2018-01-23T00:17:57.733Z,1516666677.733 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:17:57.739Z,1516666677.739 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:17:57.740Z,1516666677.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:17:58.137Z,1516666678.137 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:17:58.138Z,1516666678.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:17:58.336Z,1516666678.336 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010983 psu 2018-01-23T00:17:58.337Z,1516666678.337 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:17:58.548Z,1516666678.548 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:17:58.549Z,1516666678.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:17:58.943Z,1516666678.943 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:17:58.944Z,1516666678.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:17:59.352Z,1516666679.352 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:17:59.353Z,1516666679.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:17:59.536Z,1516666679.536 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010983 psu 2018-01-23T00:17:59.537Z,1516666679.537 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:17:59.739Z,1516666679.739 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:17:59.740Z,1516666679.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:18:00.132Z,1516666680.132 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:18:00.133Z,1516666680.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:18:00.527Z,1516666680.527 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:18:00.528Z,1516666680.528 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:18:00.736Z,1516666680.736 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010983 psu 2018-01-23T00:18:00.737Z,1516666680.737 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:18:00.924Z,1516666680.924 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:18:00.925Z,1516666680.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:18:01.348Z,1516666681.348 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:18:01.350Z,1516666681.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:18:01.354Z,1516666681.354 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010984 psu 2018-01-23T00:18:01.355Z,1516666681.355 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:18:01.737Z,1516666681.737 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:18:01.738Z,1516666681.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:18:02.138Z,1516666682.138 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:18:02.139Z,1516666682.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:18:02.520Z,1516666682.520 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:18:02.522Z,1516666682.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:18:02.556Z,1516666682.556 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010984 psu 2018-01-23T00:18:02.557Z,1516666682.557 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:18:02.936Z,1516666682.936 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:18:02.939Z,1516666682.939 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:18:03.338Z,1516666683.338 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:18:03.345Z,1516666683.345 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010984 psu 2018-01-23T00:18:03.346Z,1516666683.346 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:18:03.367Z,1516666683.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:18:03.458Z,1516666683.458 [DriftOrDonutAtChlPeak:AbortDrift:B.AbortDrift](INFO): Received valid acoustic ping at time: 1516666624.00. Resetting abort timer. 2018-01-23T00:18:03.749Z,1516666683.749 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:18:03.750Z,1516666683.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:18:04.151Z,1516666684.151 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:18:04.152Z,1516666684.152 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:18:04.539Z,1516666684.539 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:18:04.540Z,1516666684.540 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:18:04.548Z,1516666684.548 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010984 psu 2018-01-23T00:18:04.549Z,1516666684.549 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:18:04.964Z,1516666684.964 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:18:04.965Z,1516666684.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:18:05.357Z,1516666685.357 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:18:05.359Z,1516666685.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:18:05.734Z,1516666685.734 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:18:05.735Z,1516666685.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:18:05.748Z,1516666685.748 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010985 psu 2018-01-23T00:18:05.749Z,1516666685.749 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:18:06.138Z,1516666686.138 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:18:06.139Z,1516666686.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:18:06.352Z,1516666686.352 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010985 psu 2018-01-23T00:18:06.355Z,1516666686.355 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:18:06.547Z,1516666686.547 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:18:06.548Z,1516666686.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:18:06.930Z,1516666686.930 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:18:06.932Z,1516666686.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:18:07.337Z,1516666687.337 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:18:07.340Z,1516666687.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:18:07.556Z,1516666687.556 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010985 psu 2018-01-23T00:18:07.557Z,1516666687.557 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:18:07.729Z,1516666687.729 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:18:07.730Z,1516666687.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:18:08.160Z,1516666688.160 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:18:08.161Z,1516666688.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:18:08.352Z,1516666688.352 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010986 psu 2018-01-23T00:18:08.353Z,1516666688.353 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:18:08.532Z,1516666688.532 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:18:08.533Z,1516666688.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:18:08.959Z,1516666688.959 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:18:08.960Z,1516666688.960 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:18:09.359Z,1516666689.359 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:18:09.360Z,1516666689.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:18:09.552Z,1516666689.552 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010986 psu 2018-01-23T00:18:09.553Z,1516666689.553 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:18:09.752Z,1516666689.752 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:18:09.753Z,1516666689.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:18:10.155Z,1516666690.155 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:18:10.156Z,1516666690.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:18:10.535Z,1516666690.535 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:18:10.537Z,1516666690.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:18:10.752Z,1516666690.752 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010986 psu 2018-01-23T00:18:10.753Z,1516666690.753 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:18:10.920Z,1516666690.920 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:18:10.921Z,1516666690.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:18:11.349Z,1516666691.349 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:18:11.357Z,1516666691.357 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010987 psu 2018-01-23T00:18:11.359Z,1516666691.359 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:18:11.371Z,1516666691.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:18:11.729Z,1516666691.729 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:18:11.730Z,1516666691.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:18:12.150Z,1516666692.150 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:18:12.151Z,1516666692.151 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:18:12.535Z,1516666692.535 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:18:12.536Z,1516666692.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:18:12.561Z,1516666692.561 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010987 psu 2018-01-23T00:18:12.562Z,1516666692.562 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:18:12.944Z,1516666692.944 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:18:12.945Z,1516666692.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:18:13.343Z,1516666693.343 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:18:13.346Z,1516666693.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:18:13.740Z,1516666693.740 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:18:13.741Z,1516666693.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:18:13.760Z,1516666693.760 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010987 psu 2018-01-23T00:18:13.761Z,1516666693.761 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:18:14.138Z,1516666694.138 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:18:14.139Z,1516666694.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:18:14.361Z,1516666694.361 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010988 psu 2018-01-23T00:18:14.362Z,1516666694.362 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:18:14.533Z,1516666694.533 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:18:14.535Z,1516666694.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:18:14.933Z,1516666694.933 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:18:14.943Z,1516666694.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:18:15.364Z,1516666695.364 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:18:15.366Z,1516666695.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:18:15.560Z,1516666695.560 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010988 psu 2018-01-23T00:18:15.561Z,1516666695.561 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:18:15.744Z,1516666695.744 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:18:15.745Z,1516666695.745 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:18:16.141Z,1516666696.141 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:18:16.142Z,1516666696.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:18:16.564Z,1516666696.564 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:18:16.565Z,1516666696.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:18:16.761Z,1516666696.761 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010988 psu 2018-01-23T00:18:16.763Z,1516666696.763 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:18:16.930Z,1516666696.930 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:18:16.940Z,1516666696.940 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:18:17.342Z,1516666697.342 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:18:17.353Z,1516666697.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:18:17.366Z,1516666697.366 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010988 psu 2018-01-23T00:18:17.367Z,1516666697.367 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:18:17.739Z,1516666697.739 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:18:17.740Z,1516666697.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:18:18.125Z,1516666698.125 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:18:18.126Z,1516666698.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:18:18.549Z,1516666698.549 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:18:18.550Z,1516666698.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:18:18.568Z,1516666698.568 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010989 psu 2018-01-23T00:18:18.569Z,1516666698.569 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:18:18.940Z,1516666698.940 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:18:18.941Z,1516666698.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:18:19.375Z,1516666699.375 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:18:19.376Z,1516666699.376 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:18:19.746Z,1516666699.746 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:18:19.748Z,1516666699.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:18:19.768Z,1516666699.768 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010989 psu 2018-01-23T00:18:19.769Z,1516666699.769 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:18:20.139Z,1516666700.139 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:18:20.140Z,1516666700.140 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:18:20.370Z,1516666700.370 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010990 psu 2018-01-23T00:18:20.371Z,1516666700.371 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:18:20.532Z,1516666700.532 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:18:20.533Z,1516666700.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:18:20.932Z,1516666700.932 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:18:20.933Z,1516666700.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:18:21.327Z,1516666701.327 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:18:21.328Z,1516666701.328 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:18:21.572Z,1516666701.572 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010990 psu 2018-01-23T00:18:21.573Z,1516666701.573 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:18:21.745Z,1516666701.745 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:18:21.746Z,1516666701.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:18:22.122Z,1516666702.122 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:18:22.135Z,1516666702.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:18:22.529Z,1516666702.529 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:18:22.530Z,1516666702.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:18:22.773Z,1516666702.773 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010990 psu 2018-01-23T00:18:22.774Z,1516666702.774 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:18:22.926Z,1516666702.926 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:18:22.928Z,1516666702.928 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:18:23.329Z,1516666703.329 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:18:23.330Z,1516666703.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:18:23.374Z,1516666703.374 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010990 psu 2018-01-23T00:18:23.376Z,1516666703.376 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:18:23.733Z,1516666703.733 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:18:23.734Z,1516666703.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:18:24.132Z,1516666704.132 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:18:24.133Z,1516666704.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:18:24.547Z,1516666704.547 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:18:24.548Z,1516666704.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:18:24.576Z,1516666704.576 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010991 psu 2018-01-23T00:18:24.577Z,1516666704.577 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:18:24.940Z,1516666704.940 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:18:24.941Z,1516666704.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:18:25.354Z,1516666705.354 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:18:25.356Z,1516666705.356 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:18:25.739Z,1516666705.739 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:18:25.740Z,1516666705.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:18:25.776Z,1516666705.776 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010991 psu 2018-01-23T00:18:25.777Z,1516666705.777 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:18:26.137Z,1516666706.137 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:18:26.138Z,1516666706.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:18:26.379Z,1516666706.379 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010991 psu 2018-01-23T00:18:26.380Z,1516666706.380 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:18:26.538Z,1516666706.538 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:18:26.539Z,1516666706.539 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:18:26.928Z,1516666706.928 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:18:26.930Z,1516666706.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:18:27.331Z,1516666707.331 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:18:27.333Z,1516666707.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:18:27.580Z,1516666707.580 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010992 psu 2018-01-23T00:18:27.581Z,1516666707.581 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:18:27.733Z,1516666707.733 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:18:27.753Z,1516666707.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:18:27.784Z,1516666707.784 [DriftOrDonutAtChlPeak:AbortDrift:B.AbortDrift](INFO): Received valid acoustic ping at time: 1516666752.00. Resetting abort timer. 2018-01-23T00:18:28.130Z,1516666708.130 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:18:28.131Z,1516666708.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:18:28.526Z,1516666708.526 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:18:28.527Z,1516666708.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:18:28.780Z,1516666708.780 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010992 psu 2018-01-23T00:18:28.781Z,1516666708.781 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:18:28.930Z,1516666708.930 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:18:28.933Z,1516666708.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:18:29.322Z,1516666709.322 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:18:29.331Z,1516666709.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:18:29.384Z,1516666709.384 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010992 psu 2018-01-23T00:18:29.385Z,1516666709.385 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:18:29.748Z,1516666709.748 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:18:29.749Z,1516666709.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:18:30.142Z,1516666710.142 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:18:30.143Z,1516666710.143 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:18:30.543Z,1516666710.543 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:18:30.544Z,1516666710.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:18:30.584Z,1516666710.584 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010992 psu 2018-01-23T00:18:30.585Z,1516666710.585 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:18:30.946Z,1516666710.946 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:18:30.948Z,1516666710.948 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:18:31.334Z,1516666711.334 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:18:31.335Z,1516666711.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:18:31.740Z,1516666711.740 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:18:31.741Z,1516666711.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:18:31.784Z,1516666711.784 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010993 psu 2018-01-23T00:18:31.785Z,1516666711.785 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:18:32.129Z,1516666712.129 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:18:32.130Z,1516666712.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:18:32.388Z,1516666712.388 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010993 psu 2018-01-23T00:18:32.389Z,1516666712.389 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:18:32.533Z,1516666712.533 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:18:32.534Z,1516666712.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:18:32.932Z,1516666712.932 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:18:32.933Z,1516666712.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:18:33.328Z,1516666713.328 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:18:33.329Z,1516666713.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:18:33.588Z,1516666713.588 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010993 psu 2018-01-23T00:18:33.589Z,1516666713.589 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:18:33.733Z,1516666713.733 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:18:33.734Z,1516666713.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:18:34.139Z,1516666714.139 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:18:34.140Z,1516666714.140 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:18:34.529Z,1516666714.529 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:18:34.530Z,1516666714.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:18:34.788Z,1516666714.788 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010994 psu 2018-01-23T00:18:34.789Z,1516666714.789 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:18:34.955Z,1516666714.955 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:18:34.957Z,1516666714.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:18:35.343Z,1516666715.343 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:18:35.344Z,1516666715.344 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:18:35.393Z,1516666715.393 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010994 psu 2018-01-23T00:18:35.394Z,1516666715.394 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:18:35.749Z,1516666715.749 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:18:35.749Z,1516666715.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:18:36.141Z,1516666716.141 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:18:36.142Z,1516666716.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:18:36.536Z,1516666716.536 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:18:36.537Z,1516666716.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:18:36.592Z,1516666716.592 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010994 psu 2018-01-23T00:18:36.593Z,1516666716.593 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:18:36.926Z,1516666716.926 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:18:36.938Z,1516666716.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:18:37.328Z,1516666717.328 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:18:37.329Z,1516666717.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:18:37.726Z,1516666717.726 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:18:37.727Z,1516666717.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:18:37.792Z,1516666717.792 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010995 psu 2018-01-23T00:18:37.793Z,1516666717.793 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:18:38.125Z,1516666718.125 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:18:38.126Z,1516666718.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:18:38.399Z,1516666718.399 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010995 psu 2018-01-23T00:18:38.400Z,1516666718.400 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:18:38.528Z,1516666718.528 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:18:38.529Z,1516666718.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:18:38.930Z,1516666718.930 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:18:38.932Z,1516666718.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:18:39.332Z,1516666719.332 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:18:39.333Z,1516666719.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:18:39.600Z,1516666719.600 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010995 psu 2018-01-23T00:18:39.601Z,1516666719.601 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:18:39.735Z,1516666719.735 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:18:39.736Z,1516666719.736 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:18:40.800Z,1516666720.800 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010995 psu 2018-01-23T00:18:40.801Z,1516666720.801 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:18:41.402Z,1516666721.402 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010996 psu 2018-01-23T00:18:41.403Z,1516666721.403 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:18:42.604Z,1516666722.604 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010996 psu 2018-01-23T00:18:42.605Z,1516666722.605 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:18:43.455Z,1516666723.455 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:18:43.456Z,1516666723.456 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:18:43.655Z,1516666723.655 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:18:43.656Z,1516666723.656 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:18:43.805Z,1516666723.805 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010996 psu 2018-01-23T00:18:43.806Z,1516666723.806 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:18:44.024Z,1516666724.024 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:18:44.025Z,1516666724.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:18:44.407Z,1516666724.407 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010997 psu 2018-01-23T00:18:44.408Z,1516666724.408 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:18:44.464Z,1516666724.464 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:18:44.465Z,1516666724.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:18:44.825Z,1516666724.825 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:18:44.826Z,1516666724.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:18:45.223Z,1516666725.223 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:18:45.225Z,1516666725.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:18:45.611Z,1516666725.611 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010997 psu 2018-01-23T00:18:45.613Z,1516666725.613 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:18:45.623Z,1516666725.623 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:18:46.021Z,1516666726.021 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:18:46.437Z,1516666726.437 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:18:46.812Z,1516666726.812 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010997 psu 2018-01-23T00:18:46.813Z,1516666726.813 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:18:46.841Z,1516666726.841 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:18:47.212Z,1516666727.212 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:18:47.411Z,1516666727.411 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010998 psu 2018-01-23T00:18:47.412Z,1516666727.412 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:18:47.619Z,1516666727.619 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:18:48.020Z,1516666728.020 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:18:48.445Z,1516666728.445 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:18:48.612Z,1516666728.612 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010998 psu 2018-01-23T00:18:48.613Z,1516666728.613 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:18:48.829Z,1516666728.829 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:18:49.237Z,1516666729.237 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:18:49.640Z,1516666729.640 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:18:49.812Z,1516666729.812 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010998 psu 2018-01-23T00:18:49.813Z,1516666729.813 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:18:50.008Z,1516666730.008 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:18:50.416Z,1516666730.416 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010998 psu 2018-01-23T00:18:50.417Z,1516666730.417 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:18:50.452Z,1516666730.452 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:18:50.819Z,1516666730.819 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:18:51.225Z,1516666731.225 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:18:51.617Z,1516666731.617 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010999 psu 2018-01-23T00:18:51.618Z,1516666731.618 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:18:51.628Z,1516666731.628 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:18:52.020Z,1516666732.020 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:18:52.091Z,1516666732.091 [DriftOrDonutAtChlPeak:AbortDrift:B.AbortDrift](INFO): Received valid acoustic ping at time: 1516666752.00. Resetting abort timer. 2018-01-23T00:18:52.452Z,1516666732.452 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:18:52.816Z,1516666732.816 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010999 psu 2018-01-23T00:18:52.817Z,1516666732.817 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:18:52.819Z,1516666732.819 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:18:53.225Z,1516666733.225 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:18:53.420Z,1516666733.420 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010999 psu 2018-01-23T00:18:53.422Z,1516666733.422 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:18:53.626Z,1516666733.626 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:18:54.041Z,1516666734.041 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:18:54.451Z,1516666734.451 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:18:54.620Z,1516666734.620 [CTD_Seabird](ERROR): Salinity reading out of range: 0.011000 psu 2018-01-23T00:18:54.621Z,1516666734.621 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:18:54.837Z,1516666734.837 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:18:55.221Z,1516666735.221 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:18:55.616Z,1516666735.616 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:18:55.820Z,1516666735.820 [CTD_Seabird](ERROR): Salinity reading out of range: 0.011000 psu 2018-01-23T00:18:55.821Z,1516666735.821 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:18:56.021Z,1516666736.021 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:18:56.439Z,1516666736.439 [CTD_Seabird](ERROR): Salinity reading out of range: 0.011000 psu 2018-01-23T00:18:56.440Z,1516666736.440 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:18:56.444Z,1516666736.444 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:18:56.820Z,1516666736.820 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:18:57.220Z,1516666737.220 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:18:57.620Z,1516666737.620 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:18:57.644Z,1516666737.644 [CTD_Seabird](ERROR): Salinity reading out of range: 0.011000 psu 2018-01-23T00:18:57.645Z,1516666737.645 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:18:58.021Z,1516666738.021 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:18:58.420Z,1516666738.420 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:18:58.827Z,1516666738.827 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:18:58.844Z,1516666738.844 [CTD_Seabird](ERROR): Salinity reading out of range: 0.011001 psu 2018-01-23T00:18:58.845Z,1516666738.845 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:18:59.227Z,1516666739.227 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:18:59.432Z,1516666739.432 [CTD_Seabird](ERROR): Salinity reading out of range: 0.011001 psu 2018-01-23T00:18:59.434Z,1516666739.434 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:18:59.638Z,1516666739.638 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:19:00.029Z,1516666740.029 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:19:00.448Z,1516666740.448 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:19:00.632Z,1516666740.632 [CTD_Seabird](ERROR): Salinity reading out of range: 0.011002 psu 2018-01-23T00:19:00.633Z,1516666740.633 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:19:00.821Z,1516666740.821 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:19:01.225Z,1516666741.225 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:19:01.627Z,1516666741.627 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:19:01.832Z,1516666741.832 [CTD_Seabird](ERROR): Salinity reading out of range: 0.011002 psu 2018-01-23T00:19:01.833Z,1516666741.833 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:19:02.022Z,1516666742.022 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:19:02.447Z,1516666742.447 [CTD_Seabird](ERROR): Salinity reading out of range: 0.011002 psu 2018-01-23T00:19:02.448Z,1516666742.448 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:19:02.451Z,1516666742.451 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:19:02.821Z,1516666742.821 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:19:03.220Z,1516666743.220 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:19:03.619Z,1516666743.619 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:19:03.657Z,1516666743.657 [CTD_Seabird](ERROR): Salinity reading out of range: 0.011003 psu 2018-01-23T00:19:03.658Z,1516666743.658 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:19:04.028Z,1516666744.028 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:19:04.443Z,1516666744.443 [CTD_Seabird](ERROR): Salinity reading out of range: 0.011003 psu 2018-01-23T00:19:04.444Z,1516666744.444 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:19:04.455Z,1516666744.455 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:19:04.828Z,1516666744.828 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:19:05.228Z,1516666745.228 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:19:05.628Z,1516666745.628 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:19:05.644Z,1516666745.644 [CTD_Seabird](ERROR): Salinity reading out of range: 0.011003 psu 2018-01-23T00:19:05.645Z,1516666745.645 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:19:06.027Z,1516666746.027 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:19:06.439Z,1516666746.439 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:19:06.824Z,1516666746.824 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:19:06.844Z,1516666746.844 [CTD_Seabird](ERROR): Salinity reading out of range: 0.011003 psu 2018-01-23T00:19:06.845Z,1516666746.845 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:19:07.220Z,1516666747.220 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:19:07.442Z,1516666747.442 [CTD_Seabird](ERROR): Salinity reading out of range: 0.011004 psu 2018-01-23T00:19:07.443Z,1516666747.443 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:19:07.613Z,1516666747.613 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:19:08.016Z,1516666748.016 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:19:08.422Z,1516666748.422 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:19:08.645Z,1516666748.645 [CTD_Seabird](ERROR): Salinity reading out of range: 0.011004 psu 2018-01-23T00:19:08.646Z,1516666748.646 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:19:08.814Z,1516666748.814 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:19:09.242Z,1516666749.242 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:19:09.649Z,1516666749.649 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:19:09.848Z,1516666749.848 [CTD_Seabird](ERROR): Salinity reading out of range: 0.011004 psu 2018-01-23T00:19:09.849Z,1516666749.849 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:19:10.029Z,1516666750.029 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:19:10.441Z,1516666750.441 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:19:10.461Z,1516666750.461 [CTD_Seabird](ERROR): Salinity reading out of range: 0.011004 psu 2018-01-23T00:19:10.462Z,1516666750.462 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:19:10.827Z,1516666750.827 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:19:11.225Z,1516666751.225 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:19:11.612Z,1516666751.612 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:19:11.660Z,1516666751.660 [CTD_Seabird](ERROR): Salinity reading out of range: 0.011005 psu 2018-01-23T00:19:11.662Z,1516666751.662 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:19:12.016Z,1516666752.016 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:19:12.424Z,1516666752.424 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:19:12.819Z,1516666752.819 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:19:12.860Z,1516666752.860 [CTD_Seabird](ERROR): Salinity reading out of range: 0.011005 psu 2018-01-23T00:19:12.861Z,1516666752.861 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:19:13.223Z,1516666753.223 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:19:13.451Z,1516666753.451 [CTD_Seabird](ERROR): Salinity reading out of range: 0.011005 psu 2018-01-23T00:19:13.452Z,1516666753.452 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:19:13.630Z,1516666753.630 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:19:14.014Z,1516666754.014 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:19:14.443Z,1516666754.443 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:19:14.652Z,1516666754.652 [CTD_Seabird](ERROR): Salinity reading out of range: 0.011006 psu 2018-01-23T00:19:14.653Z,1516666754.653 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:19:14.844Z,1516666754.844 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:19:15.254Z,1516666755.254 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:19:15.627Z,1516666755.627 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:19:15.852Z,1516666755.852 [CTD_Seabird](ERROR): Salinity reading out of range: 0.011006 psu 2018-01-23T00:19:15.853Z,1516666755.853 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:19:16.024Z,1516666756.024 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:19:16.422Z,1516666756.422 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:19:16.456Z,1516666756.456 [CTD_Seabird](ERROR): Salinity reading out of range: 0.011006 psu 2018-01-23T00:19:16.457Z,1516666756.457 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:19:16.820Z,1516666756.820 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:19:17.217Z,1516666757.217 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:19:17.621Z,1516666757.621 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:19:17.656Z,1516666757.656 [CTD_Seabird](ERROR): Salinity reading out of range: 0.011007 psu 2018-01-23T00:19:17.657Z,1516666757.657 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:19:18.013Z,1516666758.013 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:19:18.424Z,1516666758.424 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:19:18.816Z,1516666758.816 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:19:18.865Z,1516666758.865 [CTD_Seabird](ERROR): Salinity reading out of range: 0.011007 psu 2018-01-23T00:19:18.867Z,1516666758.867 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:19:19.227Z,1516666759.227 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:19:19.461Z,1516666759.461 [CTD_Seabird](ERROR): Salinity reading out of range: 0.011007 psu 2018-01-23T00:19:19.462Z,1516666759.462 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:19:19.641Z,1516666759.641 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:19:20.043Z,1516666760.043 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:19:20.441Z,1516666760.441 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:19:20.660Z,1516666760.660 [CTD_Seabird](ERROR): Salinity reading out of range: 0.011007 psu 2018-01-23T00:19:20.661Z,1516666760.661 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:19:20.850Z,1516666760.850 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:19:21.219Z,1516666761.219 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:19:21.614Z,1516666761.614 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:19:21.860Z,1516666761.860 [CTD_Seabird](ERROR): Salinity reading out of range: 0.011008 psu 2018-01-23T00:19:21.861Z,1516666761.861 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:19:22.017Z,1516666762.017 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:19:22.424Z,1516666762.424 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:19:22.466Z,1516666762.466 [CTD_Seabird](ERROR): Salinity reading out of range: 0.011008 psu 2018-01-23T00:19:22.467Z,1516666762.467 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:19:22.826Z,1516666762.826 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:19:22.827Z,1516666762.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:19:23.223Z,1516666763.223 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:19:23.224Z,1516666763.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:19:23.614Z,1516666763.614 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:19:23.615Z,1516666763.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:19:23.668Z,1516666763.668 [CTD_Seabird](ERROR): Salinity reading out of range: 0.011008 psu 2018-01-23T00:19:23.669Z,1516666763.669 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:19:24.025Z,1516666764.025 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:19:24.026Z,1516666764.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:19:24.423Z,1516666764.423 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:19:24.424Z,1516666764.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:19:24.840Z,1516666764.840 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:19:24.841Z,1516666764.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:19:24.868Z,1516666764.868 [CTD_Seabird](ERROR): Salinity reading out of range: 0.011009 psu 2018-01-23T00:19:24.869Z,1516666764.869 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:19:25.223Z,1516666765.224 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:19:25.224Z,1516666765.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:19:25.470Z,1516666765.470 [CTD_Seabird](ERROR): Salinity reading out of range: 0.011009 psu 2018-01-23T00:19:25.471Z,1516666765.471 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:19:25.638Z,1516666765.638 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:19:25.640Z,1516666765.640 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:19:26.028Z,1516666766.028 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:19:26.030Z,1516666766.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:19:26.419Z,1516666766.419 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:19:26.672Z,1516666766.672 [CTD_Seabird](ERROR): Salinity reading out of range: 0.011009 psu 2018-01-23T00:19:26.673Z,1516666766.673 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:19:26.821Z,1516666766.821 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:19:27.225Z,1516666767.225 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:19:27.615Z,1516666767.615 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:19:27.872Z,1516666767.872 [CTD_Seabird](ERROR): Salinity reading out of range: 0.011010 psu 2018-01-23T00:19:27.873Z,1516666767.873 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:19:28.028Z,1516666768.028 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:19:28.410Z,1516666768.410 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:19:28.475Z,1516666768.475 [CTD_Seabird](ERROR): Salinity reading out of range: 0.011040 psu 2018-01-23T00:19:28.476Z,1516666768.476 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:19:28.824Z,1516666768.824 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:19:29.219Z,1516666769.219 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:19:29.613Z,1516666769.613 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:19:29.676Z,1516666769.676 [CTD_Seabird](ERROR): Salinity reading out of range: 0.011010 psu 2018-01-23T00:19:29.677Z,1516666769.677 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:19:29.725Z,1516666769.725 [CommandLine](IMPORTANT): got command get depth 2018-01-23T00:19:29.726Z,1516666769.726 [CommandLine](IMPORTANT): depth -1.255421 m 2018-01-23T00:19:30.023Z,1516666770.023 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:19:30.025Z,1516666770.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:19:30.437Z,1516666770.437 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:19:30.438Z,1516666770.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:19:30.827Z,1516666770.827 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:19:30.828Z,1516666770.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:19:30.876Z,1516666770.876 [CTD_Seabird](ERROR): Salinity reading out of range: 0.011010 psu 2018-01-23T00:19:30.877Z,1516666770.877 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:19:31.228Z,1516666771.228 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:19:31.228Z,1516666771.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:19:31.479Z,1516666771.479 [CTD_Seabird](ERROR): Salinity reading out of range: 0.011011 psu 2018-01-23T00:19:31.480Z,1516666771.480 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:19:31.616Z,1516666771.616 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:19:31.617Z,1516666771.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:19:32.020Z,1516666772.020 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:19:32.021Z,1516666772.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:19:32.418Z,1516666772.418 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:19:32.419Z,1516666772.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:19:32.680Z,1516666772.680 [CTD_Seabird](ERROR): Salinity reading out of range: 0.011041 psu 2018-01-23T00:19:32.681Z,1516666772.681 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:19:32.812Z,1516666772.812 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:19:32.813Z,1516666772.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:19:33.222Z,1516666773.222 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:19:33.223Z,1516666773.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:19:33.619Z,1516666773.619 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:19:33.620Z,1516666773.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:19:33.880Z,1516666773.880 [CTD_Seabird](ERROR): Salinity reading out of range: 0.011011 psu 2018-01-23T00:19:33.881Z,1516666773.881 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:19:34.022Z,1516666774.022 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:19:34.023Z,1516666774.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:19:34.418Z,1516666774.418 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:19:34.419Z,1516666774.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:19:34.484Z,1516666774.484 [CTD_Seabird](ERROR): Salinity reading out of range: 0.011012 psu 2018-01-23T00:19:34.485Z,1516666774.485 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:19:34.808Z,1516666774.808 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:19:34.809Z,1516666774.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:19:35.244Z,1516666775.244 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:19:35.246Z,1516666775.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:19:35.641Z,1516666775.641 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:19:35.642Z,1516666775.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:19:35.684Z,1516666775.684 [CTD_Seabird](ERROR): Salinity reading out of range: 0.011042 psu 2018-01-23T00:19:35.685Z,1516666775.685 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:19:36.037Z,1516666776.037 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:19:36.038Z,1516666776.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:19:36.438Z,1516666776.438 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:19:36.448Z,1516666776.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:19:36.814Z,1516666776.814 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:19:36.815Z,1516666776.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:19:36.884Z,1516666776.884 [CTD_Seabird](ERROR): Salinity reading out of range: 0.011012 psu 2018-01-23T00:19:36.885Z,1516666776.885 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:19:37.224Z,1516666777.224 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:19:37.225Z,1516666777.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:19:37.488Z,1516666777.488 [CTD_Seabird](ERROR): Salinity reading out of range: 0.011012 psu 2018-01-23T00:19:37.489Z,1516666777.489 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:19:37.612Z,1516666777.612 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:19:37.613Z,1516666777.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:19:38.016Z,1516666778.016 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:19:38.017Z,1516666778.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:19:38.413Z,1516666778.413 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:19:38.414Z,1516666778.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:19:38.688Z,1516666778.688 [CTD_Seabird](ERROR): Salinity reading out of range: 0.011013 psu 2018-01-23T00:19:38.689Z,1516666778.689 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:19:38.819Z,1516666778.819 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:19:38.820Z,1516666778.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:19:39.220Z,1516666779.220 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:19:39.221Z,1516666779.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:19:39.619Z,1516666779.619 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:19:39.620Z,1516666779.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:19:39.888Z,1516666779.888 [CTD_Seabird](ERROR): Salinity reading out of range: 0.011043 psu 2018-01-23T00:19:39.889Z,1516666779.889 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:19:40.012Z,1516666780.012 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:19:40.014Z,1516666780.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:19:40.493Z,1516666780.493 [CTD_Seabird](ERROR): Salinity reading out of range: 0.011013 psu 2018-01-23T00:19:40.494Z,1516666780.494 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:19:41.696Z,1516666781.696 [CTD_Seabird](ERROR): Salinity reading out of range: 0.011014 psu 2018-01-23T00:19:41.697Z,1516666781.697 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:19:42.896Z,1516666782.896 [CTD_Seabird](ERROR): Salinity reading out of range: 0.011014 psu 2018-01-23T00:19:42.897Z,1516666782.897 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:19:43.498Z,1516666783.498 [CTD_Seabird](ERROR): Salinity reading out of range: 0.011014 psu 2018-01-23T00:19:43.499Z,1516666783.499 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:19:43.743Z,1516666783.743 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:19:43.744Z,1516666783.744 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:19:43.929Z,1516666783.929 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:19:43.930Z,1516666783.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:19:44.347Z,1516666784.347 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:19:44.348Z,1516666784.348 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:19:44.700Z,1516666784.700 [CTD_Seabird](ERROR): Salinity reading out of range: 0.011015 psu 2018-01-23T00:19:44.701Z,1516666784.701 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:19:44.736Z,1516666784.736 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:19:44.737Z,1516666784.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:19:45.117Z,1516666785.117 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:19:45.118Z,1516666785.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:19:45.523Z,1516666785.523 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:19:45.524Z,1516666785.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:19:45.902Z,1516666785.902 [CTD_Seabird](ERROR): Salinity reading out of range: 0.011015 psu 2018-01-23T00:19:45.905Z,1516666785.905 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:19:45.922Z,1516666785.922 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:19:45.923Z,1516666785.923 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:19:46.331Z,1516666786.331 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:19:46.332Z,1516666786.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:19:46.502Z,1516666786.502 [CTD_Seabird](ERROR): Salinity reading out of range: 0.011015 psu 2018-01-23T00:19:46.504Z,1516666786.504 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:19:46.720Z,1516666786.720 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:19:46.721Z,1516666786.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:19:47.120Z,1516666787.120 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:19:47.121Z,1516666787.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:19:47.528Z,1516666787.528 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:19:47.529Z,1516666787.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:19:47.706Z,1516666787.706 [CTD_Seabird](ERROR): Salinity reading out of range: 0.011016 psu 2018-01-23T00:19:47.708Z,1516666787.708 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:19:47.922Z,1516666787.922 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:19:47.923Z,1516666787.923 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:19:48.308Z,1516666788.308 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:19:48.309Z,1516666788.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:19:48.732Z,1516666788.732 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:19:48.733Z,1516666788.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:19:48.908Z,1516666788.908 [CTD_Seabird](ERROR): Salinity reading out of range: 0.011016 psu 2018-01-23T00:19:48.909Z,1516666788.909 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:19:49.147Z,1516666789.147 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:19:49.148Z,1516666789.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:19:49.507Z,1516666789.507 [CTD_Seabird](ERROR): Salinity reading out of range: 0.011016 psu 2018-01-23T00:19:49.508Z,1516666789.508 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:19:49.547Z,1516666789.547 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:19:49.548Z,1516666789.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:19:49.932Z,1516666789.932 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:19:49.933Z,1516666789.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:19:50.324Z,1516666790.324 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:19:50.325Z,1516666790.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:19:50.708Z,1516666790.708 [CTD_Seabird](ERROR): Salinity reading out of range: 0.011016 psu 2018-01-23T00:19:50.709Z,1516666790.709 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:19:50.726Z,1516666790.726 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:19:51.120Z,1516666791.120 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:19:51.532Z,1516666791.532 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:19:51.908Z,1516666791.908 [CTD_Seabird](ERROR): Salinity reading out of range: 0.011017 psu 2018-01-23T00:19:51.909Z,1516666791.909 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:19:51.914Z,1516666791.914 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:19:52.310Z,1516666792.310 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:19:52.514Z,1516666792.514 [CTD_Seabird](ERROR): Salinity reading out of range: 0.011017 psu 2018-01-23T00:19:52.516Z,1516666792.516 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:19:52.719Z,1516666792.719 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:19:53.120Z,1516666793.120 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:19:53.535Z,1516666793.535 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:19:53.716Z,1516666793.716 [CTD_Seabird](ERROR): Salinity reading out of range: 0.011048 psu 2018-01-23T00:19:53.717Z,1516666793.717 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:19:53.930Z,1516666793.930 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:19:54.332Z,1516666794.332 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:19:54.725Z,1516666794.725 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:19:54.916Z,1516666794.916 [CTD_Seabird](ERROR): Salinity reading out of range: 0.011017 psu 2018-01-23T00:19:54.917Z,1516666794.917 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:19:55.139Z,1516666795.139 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:19:55.543Z,1516666795.543 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:19:55.557Z,1516666795.557 [CTD_Seabird](ERROR): Salinity reading out of range: 0.011018 psu 2018-01-23T00:19:55.559Z,1516666795.559 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:19:55.928Z,1516666795.928 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:19:56.320Z,1516666796.320 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:19:56.696Z,1516666796.696 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session. 2018-01-23T00:19:56.732Z,1516666796.732 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:19:56.760Z,1516666796.760 [CTD_Seabird](ERROR): Salinity reading out of range: 0.011018 psu 2018-01-23T00:19:56.761Z,1516666796.761 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:19:57.129Z,1516666797.129 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:19:57.504Z,1516666797.504 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-01-23T00:19:57.505Z,1516666797.505 [NAL9602] Data Fault, FailCount= 1 2018-01-23T00:19:57.505Z,1516666797.505 [NAL9602](ERROR): Data Fault 2018-01-23T00:19:57.530Z,1516666797.530 [CTD_Seabird](ERROR): Salinity reading out of range: 0.011018 psu 2018-01-23T00:19:57.531Z,1516666797.531 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:19:57.542Z,1516666797.542 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:19:57.711Z,1516666797.711 [CBIT](ERROR): Data Fault in component: NAL9602 2018-01-23T00:19:57.907Z,1516666797.907 [NAL9602](INFO): Powering down 2018-01-23T00:19:57.924Z,1516666797.924 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:19:58.327Z,1516666798.327 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:19:58.722Z,1516666798.722 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:19:58.732Z,1516666798.732 [CTD_Seabird](ERROR): Salinity reading out of range: 0.011049 psu 2018-01-23T00:19:58.733Z,1516666798.733 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:19:58.843Z,1516666798.843 [CBIT](INFO): Clearing failed state for component NAL9602 2018-01-23T00:19:58.843Z,1516666798.843 [NAL9602] No Fault, FailCount= 1 2018-01-23T00:19:59.120Z,1516666799.120 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:19:59.536Z,1516666799.536 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:19:59.912Z,1516666799.912 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:19:59.932Z,1516666799.932 [CTD_Seabird](ERROR): Salinity reading out of range: 0.011019 psu 2018-01-23T00:19:59.933Z,1516666799.933 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:20:00.316Z,1516666800.316 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:20:00.524Z,1516666800.524 [CTD_Seabird](ERROR): Salinity reading out of range: 0.011019 psu 2018-01-23T00:20:00.525Z,1516666800.525 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:20:00.726Z,1516666800.726 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:20:01.109Z,1516666801.109 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:20:01.536Z,1516666801.536 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:20:01.724Z,1516666801.724 [CTD_Seabird](ERROR): Salinity reading out of range: 0.011019 psu 2018-01-23T00:20:01.725Z,1516666801.725 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:20:01.929Z,1516666801.929 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:20:02.320Z,1516666802.320 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:20:02.741Z,1516666802.741 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:20:02.926Z,1516666802.926 [CTD_Seabird](ERROR): Salinity reading out of range: 0.011020 psu 2018-01-23T00:20:02.927Z,1516666802.927 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:20:03.115Z,1516666803.115 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:20:03.516Z,1516666803.516 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:20:03.529Z,1516666803.529 [CTD_Seabird](ERROR): Salinity reading out of range: 0.011020 psu 2018-01-23T00:20:03.530Z,1516666803.530 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:20:03.916Z,1516666803.916 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:20:04.322Z,1516666804.322 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:20:04.730Z,1516666804.730 [CTD_Seabird](ERROR): Salinity reading out of range: 0.011020 psu 2018-01-23T00:20:04.731Z,1516666804.731 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:20:04.743Z,1516666804.743 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:20:05.139Z,1516666805.139 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:20:05.532Z,1516666805.532 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:20:05.933Z,1516666805.933 [CTD_Seabird](ERROR): Salinity reading out of range: 0.011021 psu 2018-01-23T00:20:05.934Z,1516666805.934 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:20:05.943Z,1516666805.943 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:20:06.326Z,1516666806.326 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:20:06.534Z,1516666806.534 [CTD_Seabird](ERROR): Salinity reading out of range: 0.011021 psu 2018-01-23T00:20:06.535Z,1516666806.535 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:20:06.726Z,1516666806.726 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:20:07.112Z,1516666807.112 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:20:07.548Z,1516666807.548 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:20:07.736Z,1516666807.736 [CTD_Seabird](ERROR): Salinity reading out of range: 0.011021 psu 2018-01-23T00:20:07.737Z,1516666807.737 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:20:07.922Z,1516666807.922 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:20:08.361Z,1516666808.361 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:20:08.718Z,1516666808.718 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:20:08.936Z,1516666808.936 [CTD_Seabird](ERROR): Salinity reading out of range: 0.011021 psu 2018-01-23T00:20:08.937Z,1516666808.937 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:20:09.118Z,1516666809.118 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:20:09.537Z,1516666809.537 [CTD_Seabird](ERROR): Salinity reading out of range: 0.011022 psu 2018-01-23T00:20:09.539Z,1516666809.539 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:20:09.540Z,1516666809.540 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:20:09.918Z,1516666809.918 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:20:10.329Z,1516666810.329 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:20:10.712Z,1516666810.712 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:20:10.740Z,1516666810.740 [CTD_Seabird](ERROR): Salinity reading out of range: 0.011022 psu 2018-01-23T00:20:10.741Z,1516666810.741 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:20:11.128Z,1516666811.128 [CommandLine](IMPORTANT): got command set NAL9602.platform_communications 1.000000 bool 2018-01-23T00:20:11.141Z,1516666811.141 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:20:11.516Z,1516666811.516 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:20:11.923Z,1516666811.923 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:20:11.940Z,1516666811.940 [CTD_Seabird](ERROR): Salinity reading out of range: 0.011022 psu 2018-01-23T00:20:11.941Z,1516666811.941 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:20:12.319Z,1516666812.319 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:20:12.542Z,1516666812.542 [CTD_Seabird](ERROR): Salinity reading out of range: 0.011023 psu 2018-01-23T00:20:12.543Z,1516666812.543 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:20:12.727Z,1516666812.727 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:20:13.125Z,1516666813.125 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:20:13.536Z,1516666813.536 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:20:13.744Z,1516666813.744 [CTD_Seabird](ERROR): Salinity reading out of range: 0.011023 psu 2018-01-23T00:20:13.745Z,1516666813.745 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:20:13.919Z,1516666813.919 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:20:14.320Z,1516666814.320 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:20:14.720Z,1516666814.720 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:20:14.947Z,1516666814.947 [CTD_Seabird](ERROR): Salinity reading out of range: 0.011023 psu 2018-01-23T00:20:14.949Z,1516666814.949 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:20:15.121Z,1516666815.121 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:20:15.529Z,1516666815.529 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:20:15.547Z,1516666815.547 [CTD_Seabird](ERROR): Salinity reading out of range: 0.011023 psu 2018-01-23T00:20:15.548Z,1516666815.548 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:20:15.921Z,1516666815.921 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:20:16.325Z,1516666816.325 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:20:16.724Z,1516666816.724 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:20:16.748Z,1516666816.748 [CTD_Seabird](ERROR): Salinity reading out of range: 0.011024 psu 2018-01-23T00:20:16.749Z,1516666816.749 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:20:17.120Z,1516666817.120 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:20:17.514Z,1516666817.514 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:20:17.920Z,1516666817.920 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:20:17.948Z,1516666817.948 [CTD_Seabird](ERROR): Salinity reading out of range: 0.011024 psu 2018-01-23T00:20:17.949Z,1516666817.949 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:20:18.327Z,1516666818.327 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:20:18.552Z,1516666818.552 [CTD_Seabird](ERROR): Salinity reading out of range: 0.011024 psu 2018-01-23T00:20:18.553Z,1516666818.553 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:20:18.734Z,1516666818.734 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:20:19.113Z,1516666819.113 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:20:19.515Z,1516666819.515 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:20:19.752Z,1516666819.752 [CTD_Seabird](ERROR): Salinity reading out of range: 0.011024 psu 2018-01-23T00:20:19.753Z,1516666819.753 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:20:19.914Z,1516666819.914 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:20:20.319Z,1516666820.319 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:20:20.717Z,1516666820.717 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:20:20.953Z,1516666820.953 [CTD_Seabird](ERROR): Salinity reading out of range: 0.011025 psu 2018-01-23T00:20:20.955Z,1516666820.955 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:20:21.116Z,1516666821.116 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:20:21.527Z,1516666821.527 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:20:21.556Z,1516666821.556 [CTD_Seabird](ERROR): Salinity reading out of range: 0.011025 psu 2018-01-23T00:20:21.557Z,1516666821.557 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:20:21.916Z,1516666821.916 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:20:22.317Z,1516666822.317 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:20:22.713Z,1516666822.713 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:20:22.756Z,1516666822.756 [CTD_Seabird](ERROR): Salinity reading out of range: 0.011025 psu 2018-01-23T00:20:22.757Z,1516666822.757 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:20:23.120Z,1516666823.120 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:20:23.522Z,1516666823.522 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:20:23.921Z,1516666823.921 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:20:23.964Z,1516666823.964 [CTD_Seabird](ERROR): Salinity reading out of range: 0.011025 psu 2018-01-23T00:20:23.965Z,1516666823.965 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:20:24.312Z,1516666824.312 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:20:24.589Z,1516666824.589 [CTD_Seabird](ERROR): Salinity reading out of range: 0.011026 psu 2018-01-23T00:20:24.590Z,1516666824.590 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:20:24.718Z,1516666824.718 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:20:25.122Z,1516666825.122 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:20:25.518Z,1516666825.518 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:20:25.788Z,1516666825.788 [CTD_Seabird](ERROR): Salinity reading out of range: 0.011026 psu 2018-01-23T00:20:25.789Z,1516666825.789 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:20:25.929Z,1516666825.929 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:20:26.321Z,1516666826.321 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:20:26.564Z,1516666826.564 [CTD_Seabird](ERROR): Salinity reading out of range: 0.011026 psu 2018-01-23T00:20:26.565Z,1516666826.565 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:20:26.708Z,1516666826.708 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:20:27.112Z,1516666827.112 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:20:27.520Z,1516666827.520 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:20:27.764Z,1516666827.764 [CTD_Seabird](ERROR): Salinity reading out of range: 0.011026 psu 2018-01-23T00:20:27.765Z,1516666827.765 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:20:27.924Z,1516666827.924 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:20:28.299Z,1516666828.299 [NAL9602](INFO): Powering up NAL9602 2018-01-23T00:20:28.317Z,1516666828.317 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:20:28.716Z,1516666828.716 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:20:28.964Z,1516666828.964 [CTD_Seabird](ERROR): Salinity reading out of range: 0.011027 psu 2018-01-23T00:20:28.965Z,1516666828.965 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:20:29.117Z,1516666829.118 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:20:29.523Z,1516666829.523 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:20:29.569Z,1516666829.569 [CTD_Seabird](ERROR): Salinity reading out of range: 0.011027 psu 2018-01-23T00:20:29.570Z,1516666829.570 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:20:29.924Z,1516666829.924 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:20:30.328Z,1516666830.328 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:20:30.708Z,1516666830.708 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:20:30.768Z,1516666830.768 [CTD_Seabird](ERROR): Salinity reading out of range: 0.011027 psu 2018-01-23T00:20:30.769Z,1516666830.769 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:20:31.120Z,1516666831.120 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:20:31.526Z,1516666831.526 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:20:31.924Z,1516666831.924 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:20:31.972Z,1516666831.972 [CTD_Seabird](ERROR): Salinity reading out of range: 0.011028 psu 2018-01-23T00:20:31.973Z,1516666831.973 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:20:32.319Z,1516666832.319 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:20:32.573Z,1516666832.573 [CTD_Seabird](ERROR): Salinity reading out of range: 0.011028 psu 2018-01-23T00:20:32.575Z,1516666832.575 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:20:32.718Z,1516666832.718 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:20:33.117Z,1516666833.117 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:20:33.522Z,1516666833.522 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:20:33.776Z,1516666833.776 [CTD_Seabird](ERROR): Salinity reading out of range: 0.011028 psu 2018-01-23T00:20:33.777Z,1516666833.777 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:20:33.924Z,1516666833.924 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:20:34.335Z,1516666834.335 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:20:34.716Z,1516666834.716 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:20:34.976Z,1516666834.976 [CTD_Seabird](ERROR): Salinity reading out of range: 0.011028 psu 2018-01-23T00:20:34.977Z,1516666834.977 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:20:35.114Z,1516666835.114 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:20:35.516Z,1516666835.516 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:20:35.578Z,1516666835.578 [CTD_Seabird](ERROR): Salinity reading out of range: 0.011029 psu 2018-01-23T00:20:35.579Z,1516666835.579 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:20:35.917Z,1516666835.917 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:20:36.317Z,1516666836.317 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:20:36.725Z,1516666836.725 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:20:36.780Z,1516666836.780 [CTD_Seabird](ERROR): Salinity reading out of range: 0.011029 psu 2018-01-23T00:20:36.781Z,1516666836.781 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:20:37.120Z,1516666837.120 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:20:37.525Z,1516666837.525 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:20:37.912Z,1516666837.912 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:20:37.980Z,1516666837.980 [CTD_Seabird](ERROR): Salinity reading out of range: 0.011029 psu 2018-01-23T00:20:37.981Z,1516666837.981 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:20:38.329Z,1516666838.329 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:20:38.582Z,1516666838.582 [CTD_Seabird](ERROR): Salinity reading out of range: 0.011029 psu 2018-01-23T00:20:38.583Z,1516666838.583 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:20:38.736Z,1516666838.736 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:20:39.101Z,1516666839.101 [NAL9602](INFO): NAL9602 initialized 2018-01-23T00:20:39.118Z,1516666839.118 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:20:39.519Z,1516666839.519 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:20:39.555Z,1516666839.555 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = 0.000000, longitudeAccuracy_ = 0.000000, depthAccuracy_ = nan 2018-01-23T00:20:39.555Z,1516666839.555 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 2 2018-01-23T00:20:39.556Z,1516666839.556 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T00:20:39.679Z,1516666839.679 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T00:20:39.784Z,1516666839.784 [CTD_Seabird](ERROR): Salinity reading out of range: 0.011030 psu 2018-01-23T00:20:39.785Z,1516666839.785 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:20:39.946Z,1516666839.946 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:20:40.087Z,1516666840.087 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T00:20:40.087Z,1516666840.087 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 2 2018-01-23T00:20:40.340Z,1516666840.340 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:20:40.365Z,1516666840.365 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T00:20:40.365Z,1516666840.365 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T00:20:40.366Z,1516666840.366 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T00:20:40.984Z,1516666840.984 [CTD_Seabird](ERROR): Salinity reading out of range: 0.011060 psu 2018-01-23T00:20:40.985Z,1516666840.985 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:20:41.587Z,1516666841.587 [CTD_Seabird](ERROR): Salinity reading out of range: 0.011030 psu 2018-01-23T00:20:41.588Z,1516666841.588 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:20:42.788Z,1516666842.788 [CTD_Seabird](ERROR): Salinity reading out of range: 0.011061 psu 2018-01-23T00:20:42.789Z,1516666842.789 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:20:43.988Z,1516666843.988 [CTD_Seabird](ERROR): Salinity reading out of range: 0.011031 psu 2018-01-23T00:20:43.989Z,1516666843.989 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:20:44.006Z,1516666844.006 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:20:44.214Z,1516666844.214 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:20:44.592Z,1516666844.592 [CTD_Seabird](ERROR): Salinity reading out of range: 0.011031 psu 2018-01-23T00:20:44.593Z,1516666844.593 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:20:44.618Z,1516666844.618 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:20:45.007Z,1516666845.007 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:20:45.404Z,1516666845.404 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:20:45.792Z,1516666845.792 [CTD_Seabird](ERROR): Salinity reading out of range: 0.011031 psu 2018-01-23T00:20:45.793Z,1516666845.793 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:20:45.816Z,1516666845.816 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:20:46.220Z,1516666846.220 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:20:46.635Z,1516666846.635 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:20:46.992Z,1516666846.992 [CTD_Seabird](ERROR): Salinity reading out of range: 0.011031 psu 2018-01-23T00:20:46.993Z,1516666846.993 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:20:46.999Z,1516666846.999 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:20:47.402Z,1516666847.402 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:20:47.596Z,1516666847.596 [CTD_Seabird](ERROR): Salinity reading out of range: 0.011032 psu 2018-01-23T00:20:47.597Z,1516666847.597 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:20:47.805Z,1516666847.805 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:20:48.205Z,1516666848.205 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:20:48.619Z,1516666848.619 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:20:48.796Z,1516666848.796 [CTD_Seabird](ERROR): Salinity reading out of range: 0.011032 psu 2018-01-23T00:20:48.797Z,1516666848.797 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:20:49.024Z,1516666849.024 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:20:49.412Z,1516666849.412 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:20:49.816Z,1516666849.816 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:20:49.997Z,1516666849.997 [CTD_Seabird](ERROR): Salinity reading out of range: 0.011063 psu 2018-01-23T00:20:50.003Z,1516666850.003 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:20:50.194Z,1516666850.194 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:20:50.605Z,1516666850.605 [CTD_Seabird](ERROR): Salinity reading out of range: 0.011033 psu 2018-01-23T00:20:50.606Z,1516666850.606 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:20:50.621Z,1516666850.621 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:20:51.005Z,1516666851.005 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:20:51.406Z,1516666851.406 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:20:51.804Z,1516666851.804 [CTD_Seabird](ERROR): Salinity reading out of range: 0.011033 psu 2018-01-23T00:20:51.805Z,1516666851.805 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:20:51.811Z,1516666851.811 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:20:52.215Z,1516666852.215 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:20:52.632Z,1516666852.632 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:20:52.996Z,1516666852.996 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:20:53.004Z,1516666853.004 [CTD_Seabird](ERROR): Salinity reading out of range: 0.011033 psu 2018-01-23T00:20:53.005Z,1516666853.005 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:20:53.394Z,1516666853.394 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:20:53.605Z,1516666853.605 [CTD_Seabird](ERROR): Salinity reading out of range: 0.011034 psu 2018-01-23T00:20:53.607Z,1516666853.607 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:20:53.804Z,1516666853.804 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:20:54.201Z,1516666854.201 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:20:54.624Z,1516666854.624 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:20:54.808Z,1516666854.808 [CTD_Seabird](ERROR): Salinity reading out of range: 0.011034 psu 2018-01-23T00:20:54.809Z,1516666854.809 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:20:55.020Z,1516666855.020 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:20:55.414Z,1516666855.414 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:20:55.823Z,1516666855.823 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:20:56.008Z,1516666856.008 [CTD_Seabird](ERROR): Salinity reading out of range: 0.011064 psu 2018-01-23T00:20:56.009Z,1516666856.009 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:20:56.199Z,1516666856.199 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:20:56.612Z,1516666856.612 [CTD_Seabird](ERROR): Salinity reading out of range: 0.011034 psu 2018-01-23T00:20:56.613Z,1516666856.613 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:20:56.623Z,1516666856.623 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:20:57.004Z,1516666857.004 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:20:57.406Z,1516666857.406 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:20:57.812Z,1516666857.812 [CTD_Seabird](ERROR): Salinity reading out of range: 0.011035 psu 2018-01-23T00:20:57.813Z,1516666857.813 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:20:57.826Z,1516666857.826 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:20:58.216Z,1516666858.216 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:20:58.623Z,1516666858.623 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:20:59.001Z,1516666859.001 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:20:59.020Z,1516666859.020 [CTD_Seabird](ERROR): Salinity reading out of range: 0.011035 psu 2018-01-23T00:20:59.021Z,1516666859.021 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:20:59.403Z,1516666859.403 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:20:59.615Z,1516666859.615 [CTD_Seabird](ERROR): Salinity reading out of range: 0.011035 psu 2018-01-23T00:20:59.616Z,1516666859.616 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:20:59.812Z,1516666859.812 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:21:00.211Z,1516666860.211 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:21:00.623Z,1516666860.623 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:21:00.816Z,1516666860.816 [CTD_Seabird](ERROR): Salinity reading out of range: 0.011035 psu 2018-01-23T00:21:00.818Z,1516666860.818 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:21:00.998Z,1516666860.998 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:21:01.396Z,1516666861.396 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:21:01.806Z,1516666861.806 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:21:02.020Z,1516666862.020 [CTD_Seabird](ERROR): Salinity reading out of range: 0.011036 psu 2018-01-23T00:21:02.021Z,1516666862.021 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:21:02.211Z,1516666862.211 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:21:02.623Z,1516666862.623 [CTD_Seabird](ERROR): Salinity reading out of range: 0.011036 psu 2018-01-23T00:21:02.624Z,1516666862.624 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:21:02.636Z,1516666862.636 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:21:03.008Z,1516666863.008 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:21:03.405Z,1516666863.405 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:21:03.814Z,1516666863.814 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:21:03.824Z,1516666863.824 [CTD_Seabird](ERROR): Salinity reading out of range: 0.011036 psu 2018-01-23T00:21:03.825Z,1516666863.825 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:21:04.211Z,1516666864.211 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:21:04.631Z,1516666864.631 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:21:05.004Z,1516666865.004 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:21:05.032Z,1516666865.032 [CTD_Seabird](ERROR): Salinity reading out of range: 0.011036 psu 2018-01-23T00:21:05.033Z,1516666865.033 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:21:05.405Z,1516666865.405 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:21:05.624Z,1516666865.624 [CTD_Seabird](ERROR): Salinity reading out of range: 0.011037 psu 2018-01-23T00:21:05.625Z,1516666865.625 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:21:05.816Z,1516666865.816 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:21:06.216Z,1516666866.216 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:21:06.616Z,1516666866.616 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:21:06.824Z,1516666866.824 [CTD_Seabird](ERROR): Salinity reading out of range: 0.011037 psu 2018-01-23T00:21:06.825Z,1516666866.825 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:21:06.996Z,1516666866.996 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:21:07.401Z,1516666867.401 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:21:07.819Z,1516666867.819 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:21:08.024Z,1516666868.024 [CTD_Seabird](ERROR): Salinity reading out of range: 0.011038 psu 2018-01-23T00:21:08.025Z,1516666868.025 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:21:08.215Z,1516666868.215 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:21:08.630Z,1516666868.630 [CTD_Seabird](ERROR): Salinity reading out of range: 0.011038 psu 2018-01-23T00:21:08.631Z,1516666868.631 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:21:08.633Z,1516666868.633 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:21:09.005Z,1516666869.005 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:21:09.406Z,1516666869.406 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:21:09.825Z,1516666869.825 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:21:09.832Z,1516666869.832 [CTD_Seabird](ERROR): Salinity reading out of range: 0.011068 psu 2018-01-23T00:21:09.833Z,1516666869.833 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:21:10.216Z,1516666870.216 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:21:10.619Z,1516666870.619 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:21:11.011Z,1516666871.011 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:21:11.033Z,1516666871.033 [CTD_Seabird](ERROR): Salinity reading out of range: 0.011038 psu 2018-01-23T00:21:11.034Z,1516666871.034 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:21:11.400Z,1516666871.400 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:21:11.639Z,1516666871.639 [CTD_Seabird](ERROR): Salinity reading out of range: 0.011038 psu 2018-01-23T00:21:11.640Z,1516666871.640 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:21:11.826Z,1516666871.826 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:21:12.220Z,1516666872.220 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:21:12.627Z,1516666872.627 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:21:12.840Z,1516666872.840 [CTD_Seabird](ERROR): Salinity reading out of range: 0.011039 psu 2018-01-23T00:21:12.841Z,1516666872.841 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:21:12.997Z,1516666872.997 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:21:13.407Z,1516666873.407 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:21:13.827Z,1516666873.827 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:21:14.042Z,1516666874.042 [CTD_Seabird](ERROR): Salinity reading out of range: 0.011039 psu 2018-01-23T00:21:14.044Z,1516666874.044 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:21:14.215Z,1516666874.215 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:21:14.625Z,1516666874.625 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:21:14.638Z,1516666874.638 [CTD_Seabird](ERROR): Salinity reading out of range: 0.011039 psu 2018-01-23T00:21:14.639Z,1516666874.639 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:21:14.998Z,1516666874.998 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:21:15.393Z,1516666875.393 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:21:15.816Z,1516666875.816 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:21:15.840Z,1516666875.840 [CTD_Seabird](ERROR): Salinity reading out of range: 0.011040 psu 2018-01-23T00:21:15.841Z,1516666875.841 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:21:16.215Z,1516666876.215 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:21:16.618Z,1516666876.618 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:21:17.006Z,1516666877.006 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:21:17.040Z,1516666877.040 [CTD_Seabird](ERROR): Salinity reading out of range: 0.011040 psu 2018-01-23T00:21:17.041Z,1516666877.041 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:21:17.399Z,1516666877.399 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:21:17.643Z,1516666877.643 [CTD_Seabird](ERROR): Salinity reading out of range: 0.011040 psu 2018-01-23T00:21:17.644Z,1516666877.644 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:21:17.812Z,1516666877.812 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:21:18.220Z,1516666878.220 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:21:18.626Z,1516666878.626 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:21:18.629Z,1516666878.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:21:18.844Z,1516666878.844 [CTD_Seabird](ERROR): Salinity reading out of range: 0.011040 psu 2018-01-23T00:21:18.845Z,1516666878.845 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:21:19.001Z,1516666879.001 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:21:19.002Z,1516666879.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:21:19.399Z,1516666879.399 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:21:19.400Z,1516666879.400 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:21:19.815Z,1516666879.815 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:21:19.816Z,1516666879.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:21:20.044Z,1516666880.044 [CTD_Seabird](ERROR): Salinity reading out of range: 0.011041 psu 2018-01-23T00:21:20.045Z,1516666880.045 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:21:20.231Z,1516666880.231 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:21:20.232Z,1516666880.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:21:20.625Z,1516666880.625 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:21:20.626Z,1516666880.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:21:20.647Z,1516666880.647 [CTD_Seabird](ERROR): Salinity reading out of range: 0.011041 psu 2018-01-23T00:21:20.648Z,1516666880.648 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:21:21.005Z,1516666881.005 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:21:21.006Z,1516666881.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:21:21.404Z,1516666881.404 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:21:21.405Z,1516666881.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:21:21.825Z,1516666881.825 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:21:21.826Z,1516666881.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:21:21.848Z,1516666881.848 [CTD_Seabird](ERROR): Salinity reading out of range: 0.011041 psu 2018-01-23T00:21:21.849Z,1516666881.849 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:21:22.214Z,1516666882.214 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:21:22.215Z,1516666882.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:21:22.617Z,1516666882.617 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:21:22.618Z,1516666882.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:21:23.005Z,1516666883.005 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:21:23.006Z,1516666883.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:21:23.048Z,1516666883.048 [CTD_Seabird](ERROR): Salinity reading out of range: 0.011072 psu 2018-01-23T00:21:23.049Z,1516666883.049 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:21:23.393Z,1516666883.393 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:21:23.394Z,1516666883.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:21:23.652Z,1516666883.652 [CTD_Seabird](ERROR): Salinity reading out of range: 0.011042 psu 2018-01-23T00:21:23.653Z,1516666883.653 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:21:23.825Z,1516666883.825 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:21:23.826Z,1516666883.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:21:24.215Z,1516666884.215 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:21:24.216Z,1516666884.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:21:24.619Z,1516666884.619 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:21:24.620Z,1516666884.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:21:24.852Z,1516666884.852 [CTD_Seabird](ERROR): Salinity reading out of range: 0.011072 psu 2018-01-23T00:21:24.853Z,1516666884.853 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:21:24.997Z,1516666884.997 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:21:24.999Z,1516666884.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:21:25.411Z,1516666885.411 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:21:25.412Z,1516666885.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:21:25.824Z,1516666885.824 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:21:25.825Z,1516666885.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:21:26.052Z,1516666886.052 [CTD_Seabird](ERROR): Salinity reading out of range: 0.011042 psu 2018-01-23T00:21:26.053Z,1516666886.053 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:21:26.208Z,1516666886.208 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:21:26.209Z,1516666886.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:21:26.616Z,1516666886.616 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:21:26.617Z,1516666886.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:21:26.656Z,1516666886.656 [CTD_Seabird](ERROR): Salinity reading out of range: 0.011042 psu 2018-01-23T00:21:26.658Z,1516666886.658 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:21:26.998Z,1516666886.998 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:21:26.999Z,1516666886.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:21:27.416Z,1516666887.416 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:21:27.417Z,1516666887.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:21:27.811Z,1516666887.811 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:21:27.812Z,1516666887.812 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:21:27.856Z,1516666887.856 [CTD_Seabird](ERROR): Salinity reading out of range: 0.011043 psu 2018-01-23T00:21:27.857Z,1516666887.857 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:21:28.220Z,1516666888.220 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:21:28.221Z,1516666888.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:21:28.620Z,1516666888.620 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:21:28.621Z,1516666888.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:21:29.001Z,1516666889.001 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:21:29.002Z,1516666889.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:21:29.060Z,1516666889.060 [CTD_Seabird](ERROR): Salinity reading out of range: 0.011043 psu 2018-01-23T00:21:29.061Z,1516666889.061 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:21:29.409Z,1516666889.409 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:21:29.411Z,1516666889.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:21:29.662Z,1516666889.662 [CTD_Seabird](ERROR): Salinity reading out of range: 0.011043 psu 2018-01-23T00:21:29.663Z,1516666889.663 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:21:29.808Z,1516666889.808 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:21:29.809Z,1516666889.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:21:30.219Z,1516666890.219 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:21:30.220Z,1516666890.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:21:30.612Z,1516666890.612 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:21:30.613Z,1516666890.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:21:30.864Z,1516666890.864 [CTD_Seabird](ERROR): Salinity reading out of range: 0.011043 psu 2018-01-23T00:21:30.865Z,1516666890.865 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:21:31.001Z,1516666891.001 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:21:31.003Z,1516666891.003 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:21:31.412Z,1516666891.412 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:21:31.413Z,1516666891.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:21:31.813Z,1516666891.813 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:21:31.814Z,1516666891.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:21:32.064Z,1516666892.064 [CTD_Seabird](ERROR): Salinity reading out of range: 0.011044 psu 2018-01-23T00:21:32.065Z,1516666892.065 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:21:32.221Z,1516666892.221 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:21:32.223Z,1516666892.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:21:32.620Z,1516666892.620 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:21:32.621Z,1516666892.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:21:32.669Z,1516666892.669 [CTD_Seabird](ERROR): Salinity reading out of range: 0.011044 psu 2018-01-23T00:21:32.672Z,1516666892.672 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:21:33.011Z,1516666893.011 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:21:33.012Z,1516666893.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:21:33.404Z,1516666893.404 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:21:33.405Z,1516666893.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:21:33.802Z,1516666893.802 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:21:33.803Z,1516666893.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:21:33.872Z,1516666893.872 [CTD_Seabird](ERROR): Salinity reading out of range: 0.011044 psu 2018-01-23T00:21:33.873Z,1516666893.873 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:21:34.213Z,1516666894.213 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:21:34.214Z,1516666894.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:21:34.611Z,1516666894.611 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:21:34.612Z,1516666894.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:21:35.015Z,1516666895.015 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:21:35.016Z,1516666895.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:21:35.072Z,1516666895.072 [CTD_Seabird](ERROR): Salinity reading out of range: 0.011045 psu 2018-01-23T00:21:35.073Z,1516666895.073 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:21:35.411Z,1516666895.411 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:21:35.412Z,1516666895.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:21:35.670Z,1516666895.670 [CTD_Seabird](ERROR): Salinity reading out of range: 0.011075 psu 2018-01-23T00:21:35.671Z,1516666895.671 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:21:35.815Z,1516666895.815 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:21:35.816Z,1516666895.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:21:36.205Z,1516666896.205 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:21:36.206Z,1516666896.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:21:36.607Z,1516666896.607 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:21:36.608Z,1516666896.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:21:36.872Z,1516666896.872 [CTD_Seabird](ERROR): Salinity reading out of range: 0.011075 psu 2018-01-23T00:21:36.873Z,1516666896.873 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:21:37.007Z,1516666897.007 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:21:37.008Z,1516666897.008 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:21:37.409Z,1516666897.409 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:21:37.410Z,1516666897.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:21:37.792Z,1516666897.792 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:21:37.793Z,1516666897.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:21:38.072Z,1516666898.072 [CTD_Seabird](ERROR): Salinity reading out of range: 0.011045 psu 2018-01-23T00:21:38.073Z,1516666898.073 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:21:38.220Z,1516666898.220 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:21:38.221Z,1516666898.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:21:38.625Z,1516666898.625 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:21:38.626Z,1516666898.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:21:38.676Z,1516666898.676 [CTD_Seabird](ERROR): Salinity reading out of range: 0.011046 psu 2018-01-23T00:21:38.678Z,1516666898.678 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:21:39.007Z,1516666899.007 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:21:39.008Z,1516666899.008 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:21:39.398Z,1516666899.398 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:21:39.400Z,1516666899.400 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:21:39.807Z,1516666899.807 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:21:39.808Z,1516666899.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:21:39.876Z,1516666899.876 [CTD_Seabird](ERROR): Salinity reading out of range: 0.011046 psu 2018-01-23T00:21:39.877Z,1516666899.877 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:21:40.206Z,1516666900.206 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:21:40.207Z,1516666900.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:21:40.615Z,1516666900.615 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:21:40.616Z,1516666900.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:21:41.076Z,1516666901.076 [CTD_Seabird](ERROR): Salinity reading out of range: 0.011077 psu 2018-01-23T00:21:41.077Z,1516666901.077 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:21:41.680Z,1516666901.680 [CTD_Seabird](ERROR): Salinity reading out of range: 0.011077 psu 2018-01-23T00:21:41.681Z,1516666901.681 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:21:42.880Z,1516666902.880 [CTD_Seabird](ERROR): Salinity reading out of range: 0.011046 psu 2018-01-23T00:21:42.881Z,1516666902.881 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:21:44.080Z,1516666904.080 [CTD_Seabird](ERROR): Salinity reading out of range: 0.011047 psu 2018-01-23T00:21:44.081Z,1516666904.081 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:21:44.300Z,1516666904.300 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:21:44.301Z,1516666904.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:21:44.493Z,1516666904.493 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:21:44.494Z,1516666904.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:21:44.685Z,1516666904.685 [CTD_Seabird](ERROR): Salinity reading out of range: 0.011047 psu 2018-01-23T00:21:44.686Z,1516666904.686 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:21:44.889Z,1516666904.889 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:21:44.890Z,1516666904.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:21:45.285Z,1516666905.285 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:21:45.286Z,1516666905.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:21:45.696Z,1516666905.696 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:21:45.697Z,1516666905.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:21:45.888Z,1516666905.888 [CTD_Seabird](ERROR): Salinity reading out of range: 0.011078 psu 2018-01-23T00:21:45.889Z,1516666905.889 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:21:46.069Z,1516666906.069 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:21:46.070Z,1516666906.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:21:46.472Z,1516666906.472 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:21:46.473Z,1516666906.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:21:46.897Z,1516666906.897 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:21:46.898Z,1516666906.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:21:47.090Z,1516666907.090 [CTD_Seabird](ERROR): Salinity reading out of range: 0.011048 psu 2018-01-23T00:21:47.091Z,1516666907.091 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:21:47.279Z,1516666907.279 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:21:47.280Z,1516666907.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:21:47.695Z,1516666907.695 [CTD_Seabird](ERROR): Salinity reading out of range: 0.011048 psu 2018-01-23T00:21:47.697Z,1516666907.697 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:21:47.714Z,1516666907.714 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:21:47.715Z,1516666907.715 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:21:48.080Z,1516666908.080 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:21:48.081Z,1516666908.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:21:48.473Z,1516666908.473 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:21:48.474Z,1516666908.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:21:48.896Z,1516666908.896 [CTD_Seabird](ERROR): Salinity reading out of range: 0.011048 psu 2018-01-23T00:21:48.897Z,1516666908.897 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:21:48.903Z,1516666908.903 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:21:48.904Z,1516666908.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:21:49.293Z,1516666909.293 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:21:49.294Z,1516666909.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:21:49.686Z,1516666909.686 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:21:49.687Z,1516666909.687 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:21:50.075Z,1516666910.075 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:21:50.076Z,1516666910.076 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:21:50.096Z,1516666910.096 [CTD_Seabird](ERROR): Salinity reading out of range: 0.011048 psu 2018-01-23T00:21:50.097Z,1516666910.097 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:21:50.482Z,1516666910.482 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:21:50.483Z,1516666910.483 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:21:50.693Z,1516666910.693 [CTD_Seabird](ERROR): Salinity reading out of range: 0.011079 psu 2018-01-23T00:21:50.694Z,1516666910.694 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:21:50.879Z,1516666910.879 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:21:50.880Z,1516666910.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:21:51.288Z,1516666911.288 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:21:51.288Z,1516666911.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:21:51.702Z,1516666911.702 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:21:51.703Z,1516666911.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:21:51.896Z,1516666911.896 [CTD_Seabird](ERROR): Salinity reading out of range: 0.011049 psu 2018-01-23T00:21:51.897Z,1516666911.897 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:21:52.076Z,1516666912.076 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:21:52.077Z,1516666912.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:21:52.476Z,1516666912.476 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:21:52.477Z,1516666912.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:21:52.892Z,1516666912.892 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:21:52.893Z,1516666912.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:21:53.096Z,1516666913.096 [CTD_Seabird](ERROR): Salinity reading out of range: 0.011049 psu 2018-01-23T00:21:53.097Z,1516666913.097 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:21:53.280Z,1516666913.280 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:21:53.281Z,1516666913.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:21:53.701Z,1516666913.701 [CTD_Seabird](ERROR): Salinity reading out of range: 0.011050 psu 2018-01-23T00:21:53.703Z,1516666913.703 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:21:53.707Z,1516666913.707 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:21:53.708Z,1516666913.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:21:54.083Z,1516666914.083 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:21:54.084Z,1516666914.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:21:54.472Z,1516666914.472 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:21:54.473Z,1516666914.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:21:54.896Z,1516666914.896 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:21:54.897Z,1516666914.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:21:54.904Z,1516666914.904 [CTD_Seabird](ERROR): Salinity reading out of range: 0.011050 psu 2018-01-23T00:21:54.905Z,1516666914.905 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:21:55.287Z,1516666915.287 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:21:55.288Z,1516666915.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:21:55.712Z,1516666915.712 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:21:55.713Z,1516666915.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:21:56.080Z,1516666916.080 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:21:56.081Z,1516666916.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:21:56.104Z,1516666916.104 [CTD_Seabird](ERROR): Salinity reading out of range: 0.011050 psu 2018-01-23T00:21:56.105Z,1516666916.105 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:21:56.484Z,1516666916.484 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:21:56.485Z,1516666916.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:21:56.703Z,1516666916.703 [CTD_Seabird](ERROR): Salinity reading out of range: 0.011050 psu 2018-01-23T00:21:56.704Z,1516666916.704 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:21:56.889Z,1516666916.889 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:21:56.890Z,1516666916.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:21:57.293Z,1516666917.293 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:21:57.295Z,1516666917.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:21:57.702Z,1516666917.702 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:21:57.703Z,1516666917.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:21:57.904Z,1516666917.904 [CTD_Seabird](ERROR): Salinity reading out of range: 0.011081 psu 2018-01-23T00:21:57.906Z,1516666917.906 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:21:58.072Z,1516666918.072 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:21:58.073Z,1516666918.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:21:58.470Z,1516666918.470 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:21:58.471Z,1516666918.471 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:21:58.880Z,1516666918.880 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:21:58.881Z,1516666918.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:21:59.106Z,1516666919.106 [CTD_Seabird](ERROR): Salinity reading out of range: 0.011051 psu 2018-01-23T00:21:59.107Z,1516666919.107 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:21:59.280Z,1516666919.280 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:21:59.281Z,1516666919.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:21:59.682Z,1516666919.682 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:21:59.686Z,1516666919.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:21:59.707Z,1516666919.707 [CTD_Seabird](ERROR): Salinity reading out of range: 0.011051 psu 2018-01-23T00:21:59.708Z,1516666919.708 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:22:00.083Z,1516666920.083 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:22:00.084Z,1516666920.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:22:00.464Z,1516666920.464 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:22:00.465Z,1516666920.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:22:00.880Z,1516666920.880 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:22:00.881Z,1516666920.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:22:00.908Z,1516666920.908 [CTD_Seabird](ERROR): Salinity reading out of range: 0.011051 psu 2018-01-23T00:22:00.909Z,1516666920.909 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:22:01.304Z,1516666921.304 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:22:01.305Z,1516666921.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:22:01.700Z,1516666921.700 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:22:01.702Z,1516666921.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:22:02.077Z,1516666922.077 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:22:02.078Z,1516666922.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:22:02.108Z,1516666922.108 [CTD_Seabird](ERROR): Salinity reading out of range: 0.011051 psu 2018-01-23T00:22:02.109Z,1516666922.109 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:22:02.481Z,1516666922.481 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:22:02.482Z,1516666922.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:22:02.712Z,1516666922.712 [CTD_Seabird](ERROR): Salinity reading out of range: 0.011052 psu 2018-01-23T00:22:02.713Z,1516666922.713 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:22:02.883Z,1516666922.883 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:22:02.884Z,1516666922.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:22:03.294Z,1516666923.294 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:22:03.295Z,1516666923.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:22:03.698Z,1516666923.698 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:22:03.702Z,1516666923.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:22:03.912Z,1516666923.912 [CTD_Seabird](ERROR): Salinity reading out of range: 0.011052 psu 2018-01-23T00:22:03.913Z,1516666923.913 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:22:04.083Z,1516666924.083 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:22:04.085Z,1516666924.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:22:04.484Z,1516666924.484 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:22:04.485Z,1516666924.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:22:04.889Z,1516666924.889 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:22:04.890Z,1516666924.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:22:05.113Z,1516666925.113 [CTD_Seabird](ERROR): Salinity reading out of range: 0.011083 psu 2018-01-23T00:22:05.114Z,1516666925.114 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:22:05.286Z,1516666925.286 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:22:05.287Z,1516666925.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:22:05.699Z,1516666925.699 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:22:05.703Z,1516666925.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:22:05.716Z,1516666925.716 [CTD_Seabird](ERROR): Salinity reading out of range: 0.011083 psu 2018-01-23T00:22:05.718Z,1516666925.718 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:22:06.080Z,1516666926.080 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:22:06.082Z,1516666926.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:22:06.475Z,1516666926.475 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:22:06.476Z,1516666926.476 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:22:06.888Z,1516666926.888 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:22:06.889Z,1516666926.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:22:06.917Z,1516666926.917 [CTD_Seabird](ERROR): Salinity reading out of range: 0.011053 psu 2018-01-23T00:22:06.919Z,1516666926.919 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:22:07.285Z,1516666927.285 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:22:07.286Z,1516666927.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:22:07.688Z,1516666927.688 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:22:07.690Z,1516666927.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:22:08.095Z,1516666928.095 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:22:08.096Z,1516666928.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:22:08.120Z,1516666928.120 [CTD_Seabird](ERROR): Salinity reading out of range: 0.011053 psu 2018-01-23T00:22:08.122Z,1516666928.122 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:22:08.161Z,1516666928.161 [DriftOrDonutAtChlPeak:FindHighChlLocation:NeedComms:C](INFO): Timed out from 2018-01-23T00:15:08.1Z 2018-01-23T00:22:08.161Z,1516666928.161 [DriftOrDonutAtChlPeak:FindHighChlLocation:NeedComms:C:A_Timeout] Running Loop=1 2018-01-23T00:22:08.161Z,1516666928.161 [DriftOrDonutAtChlPeak:FindHighChlLocation:NeedComms:C:A_Timeout](DEBUG): Aggregate::initialize DriftOrDonutAtChlPeak:FindHighChlLocation:NeedComms:C:A_Timeout 2018-01-23T00:22:08.162Z,1516666928.162 [DriftOrDonutAtChlPeak:FindHighChlLocation:NeedComms:C:A_Timeout:A] Running Loop=1 2018-01-23T00:22:08.162Z,1516666928.162 [DriftOrDonutAtChlPeak:FindHighChlLocation:NeedComms:C:A_Timeout:A](IMPORTANT): first GPS update timeout 2018-01-23T00:22:08.169Z,1516666928.169 [DriftOrDonutAtChlPeak:FindHighChlLocation:NeedComms:C:A_Timeout:A] Stopped 2018-01-23T00:22:08.169Z,1516666928.169 [DriftOrDonutAtChlPeak:FindHighChlLocation:NeedComms:C:A_Timeout](INFO): Completed DriftOrDonutAtChlPeak:FindHighChlLocation:NeedComms:C:A_Timeout 2018-01-23T00:22:08.169Z,1516666928.169 [DriftOrDonutAtChlPeak:FindHighChlLocation:NeedComms:C] Stopped 2018-01-23T00:22:08.169Z,1516666928.169 [DriftOrDonutAtChlPeak:FindHighChlLocation:NeedComms:D] Running Loop=1 2018-01-23T00:22:08.477Z,1516666928.477 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:22:08.478Z,1516666928.478 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:22:08.520Z,1516666928.520 [DriftOrDonutAtChlPeak:FindHighChlLocation:NeedComms:D](DEBUG): Initialize ReadDataComponent to sense platform_communications 2018-01-23T00:22:08.721Z,1516666928.721 [CTD_Seabird](ERROR): Salinity reading out of range: 0.011084 psu 2018-01-23T00:22:08.722Z,1516666928.722 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:22:09.100Z,1516666929.100 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:22:09.101Z,1516666929.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:22:09.384Z,1516666929.384 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:22:09.385Z,1516666929.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:22:09.920Z,1516666929.920 [CTD_Seabird](ERROR): Salinity reading out of range: 0.011054 psu 2018-01-23T00:22:09.921Z,1516666929.921 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:22:11.120Z,1516666931.120 [CTD_Seabird](ERROR): Salinity reading out of range: 0.011054 psu 2018-01-23T00:22:11.121Z,1516666931.121 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:22:11.726Z,1516666931.726 [CTD_Seabird](ERROR): Salinity reading out of range: 0.011054 psu 2018-01-23T00:22:11.727Z,1516666931.727 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:22:12.928Z,1516666932.928 [CTD_Seabird](ERROR): Salinity reading out of range: 0.011054 psu 2018-01-23T00:22:12.929Z,1516666932.929 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:22:13.412Z,1516666933.412 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:22:13.413Z,1516666933.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:22:13.547Z,1516666933.547 [DataOverHttps](INFO): Sending 43 bytes from file Logs/20180123T000528/Courier0012.lzma 2018-01-23T00:22:13.574Z,1516666933.574 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:22:13.576Z,1516666933.576 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:22:13.979Z,1516666933.979 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:22:13.980Z,1516666933.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:22:14.128Z,1516666934.128 [CTD_Seabird](ERROR): Salinity reading out of range: 0.011055 psu 2018-01-23T00:22:14.129Z,1516666934.129 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:22:14.345Z,1516666934.345 [DataOverHttps](INFO): Moved sent file to Logs/20180123T000528/Courier0012.lzma.bak 2018-01-23T00:22:14.345Z,1516666934.345 [DataOverHttps](INFO): SBD MOMSN=7753422 2018-01-23T00:22:14.368Z,1516666934.368 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:22:14.369Z,1516666934.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:22:14.731Z,1516666934.731 [CTD_Seabird](ERROR): Salinity reading out of range: 0.011055 psu 2018-01-23T00:22:14.733Z,1516666934.733 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:22:15.204Z,1516666935.204 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:22:15.205Z,1516666935.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:22:15.403Z,1516666935.403 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:22:15.404Z,1516666935.404 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:22:15.932Z,1516666935.932 [CTD_Seabird](ERROR): Salinity reading out of range: 0.011055 psu 2018-01-23T00:22:15.933Z,1516666935.933 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:22:17.132Z,1516666937.132 [CTD_Seabird](ERROR): Salinity reading out of range: 0.011055 psu 2018-01-23T00:22:17.133Z,1516666937.133 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:22:17.735Z,1516666937.735 [CTD_Seabird](ERROR): Salinity reading out of range: 0.011055 psu 2018-01-23T00:22:17.736Z,1516666937.736 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:22:18.936Z,1516666938.936 [CTD_Seabird](ERROR): Salinity reading out of range: 0.011056 psu 2018-01-23T00:22:18.937Z,1516666938.937 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:22:19.112Z,1516666939.112 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:22:19.286Z,1516666939.286 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:22:19.692Z,1516666939.692 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:22:20.092Z,1516666940.092 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:22:20.136Z,1516666940.136 [CTD_Seabird](ERROR): Salinity reading out of range: 0.011056 psu 2018-01-23T00:22:20.137Z,1516666940.137 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:22:20.503Z,1516666940.503 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:22:20.739Z,1516666940.739 [CTD_Seabird](ERROR): Salinity reading out of range: 0.011056 psu 2018-01-23T00:22:20.741Z,1516666940.741 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:22:20.902Z,1516666940.902 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:22:21.940Z,1516666941.940 [CTD_Seabird](ERROR): Salinity reading out of range: 0.011056 psu 2018-01-23T00:22:21.941Z,1516666941.941 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:22:23.140Z,1516666943.140 [CTD_Seabird](ERROR): Salinity reading out of range: 0.011057 psu 2018-01-23T00:22:23.141Z,1516666943.141 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:22:23.744Z,1516666943.744 [CTD_Seabird](ERROR): Salinity reading out of range: 0.011057 psu 2018-01-23T00:22:23.745Z,1516666943.745 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:22:24.567Z,1516666944.567 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:22:24.711Z,1516666944.711 [DataOverHttps](INFO): Sending 1275 bytes from file Logs/20180123T000528/Express0013.lzma 2018-01-23T00:22:24.792Z,1516666944.792 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:22:24.944Z,1516666944.944 [CTD_Seabird](ERROR): Salinity reading out of range: 0.011057 psu 2018-01-23T00:22:24.945Z,1516666944.945 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:22:25.132Z,1516666945.132 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:22:25.516Z,1516666945.516 [DataOverHttps](INFO): Moved sent file to Logs/20180123T000528/Express0013.lzma.bak 2018-01-23T00:22:25.516Z,1516666945.516 [DataOverHttps](INFO): SBD MOMSN=7753424 2018-01-23T00:22:25.542Z,1516666945.542 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:22:26.145Z,1516666946.145 [CTD_Seabird](ERROR): Salinity reading out of range: 0.011057 psu 2018-01-23T00:22:26.147Z,1516666946.147 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:22:26.228Z,1516666946.228 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:22:26.255Z,1516666946.255 [DriftOrDonutAtChlPeak:FindHighChlLocation:NeedComms:D] Stopped 2018-01-23T00:22:26.255Z,1516666946.255 [DriftOrDonutAtChlPeak:FindHighChlLocation:NeedComms:E] Running Loop=1 2018-01-23T00:22:26.375Z,1516666946.375 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:22:26.425Z,1516666946.425 [DriftOrDonutAtChlPeak:FindHighChlLocation:NeedComms:E](DEBUG): Initialize ReadDataComponent to sense time_fix 2018-01-23T00:22:26.762Z,1516666946.762 [CTD_Seabird](ERROR): Salinity reading out of range: 0.011058 psu 2018-01-23T00:22:26.763Z,1516666946.763 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:22:27.964Z,1516666947.964 [CTD_Seabird](ERROR): Salinity reading out of range: 0.011058 psu 2018-01-23T00:22:27.965Z,1516666947.965 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:22:28.752Z,1516666948.752 [CTD_Seabird](ERROR): Salinity reading out of range: 0.011058 psu 2018-01-23T00:22:28.753Z,1516666948.753 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:22:29.952Z,1516666949.952 [CTD_Seabird](ERROR): Salinity reading out of range: 0.011059 psu 2018-01-23T00:22:29.953Z,1516666949.953 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:22:30.105Z,1516666950.105 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:22:30.254Z,1516666950.254 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:22:30.690Z,1516666950.690 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:22:31.081Z,1516666951.081 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:22:31.152Z,1516666951.152 [CTD_Seabird](ERROR): Salinity reading out of range: 0.011059 psu 2018-01-23T00:22:31.153Z,1516666951.153 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:22:31.463Z,1516666951.463 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:22:31.757Z,1516666951.757 [CTD_Seabird](ERROR): Salinity reading out of range: 0.011059 psu 2018-01-23T00:22:31.759Z,1516666951.759 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:22:31.856Z,1516666951.856 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:22:32.258Z,1516666952.258 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:22:32.668Z,1516666952.668 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:22:32.960Z,1516666952.960 [CTD_Seabird](ERROR): Salinity reading out of range: 0.011059 psu 2018-01-23T00:22:32.961Z,1516666952.961 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:22:33.064Z,1516666953.064 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:22:33.470Z,1516666953.470 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:22:33.880Z,1516666953.880 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:22:34.161Z,1516666954.161 [CTD_Seabird](ERROR): Salinity reading out of range: 0.011060 psu 2018-01-23T00:22:34.162Z,1516666954.162 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:22:34.258Z,1516666954.258 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:22:34.672Z,1516666954.672 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:22:34.761Z,1516666954.761 [CTD_Seabird](ERROR): Salinity reading out of range: 0.011090 psu 2018-01-23T00:22:34.762Z,1516666954.762 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:22:35.064Z,1516666955.064 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:22:35.465Z,1516666955.465 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:22:35.858Z,1516666955.858 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:22:35.960Z,1516666955.960 [CTD_Seabird](ERROR): Salinity reading out of range: 0.011060 psu 2018-01-23T00:22:35.961Z,1516666955.961 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:22:36.285Z,1516666956.285 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:22:36.685Z,1516666956.685 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:22:37.081Z,1516666957.081 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:22:37.160Z,1516666957.160 [CTD_Seabird](ERROR): Salinity reading out of range: 0.011060 psu 2018-01-23T00:22:37.161Z,1516666957.161 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:22:37.460Z,1516666957.460 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:22:37.766Z,1516666957.766 [CTD_Seabird](ERROR): Salinity reading out of range: 0.011091 psu 2018-01-23T00:22:37.767Z,1516666957.767 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:22:37.862Z,1516666957.862 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:22:38.263Z,1516666958.263 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:22:38.671Z,1516666958.671 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:22:38.968Z,1516666958.968 [CTD_Seabird](ERROR): Salinity reading out of range: 0.011061 psu 2018-01-23T00:22:38.969Z,1516666958.969 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:22:39.069Z,1516666959.069 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:22:39.478Z,1516666959.478 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:22:39.882Z,1516666959.882 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:22:40.169Z,1516666960.169 [CTD_Seabird](ERROR): Salinity reading out of range: 0.011061 psu 2018-01-23T00:22:40.171Z,1516666960.171 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:22:40.256Z,1516666960.256 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:22:40.659Z,1516666960.659 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:22:40.771Z,1516666960.771 [CTD_Seabird](ERROR): Salinity reading out of range: 0.011061 psu 2018-01-23T00:22:40.773Z,1516666960.773 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:22:41.068Z,1516666961.068 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:22:41.469Z,1516666961.469 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:22:41.858Z,1516666961.858 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:22:41.972Z,1516666961.972 [CTD_Seabird](ERROR): Salinity reading out of range: 0.011062 psu 2018-01-23T00:22:41.973Z,1516666961.973 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:22:42.276Z,1516666962.276 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:22:42.671Z,1516666962.671 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:22:43.087Z,1516666963.087 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:22:43.173Z,1516666963.173 [CTD_Seabird](ERROR): Salinity reading out of range: 0.011092 psu 2018-01-23T00:22:43.175Z,1516666963.175 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:22:43.461Z,1516666963.461 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:22:43.776Z,1516666963.776 [CTD_Seabird](ERROR): Salinity reading out of range: 0.011062 psu 2018-01-23T00:22:43.777Z,1516666963.777 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:22:43.866Z,1516666963.866 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:22:44.259Z,1516666964.259 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:22:44.659Z,1516666964.659 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:22:44.976Z,1516666964.976 [CTD_Seabird](ERROR): Salinity reading out of range: 0.011062 psu 2018-01-23T00:22:44.977Z,1516666964.977 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:22:45.076Z,1516666965.076 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:22:45.479Z,1516666965.479 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:22:45.878Z,1516666965.878 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:22:46.176Z,1516666966.176 [CTD_Seabird](ERROR): Salinity reading out of range: 0.011062 psu 2018-01-23T00:22:46.177Z,1516666966.177 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:22:46.253Z,1516666966.253 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:22:46.660Z,1516666966.660 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:22:46.780Z,1516666966.780 [CTD_Seabird](ERROR): Salinity reading out of range: 0.011093 psu 2018-01-23T00:22:46.781Z,1516666966.781 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:22:47.057Z,1516666967.057 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:22:47.465Z,1516666967.465 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:22:47.866Z,1516666967.866 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:22:47.980Z,1516666967.980 [CTD_Seabird](ERROR): Salinity reading out of range: 0.011063 psu 2018-01-23T00:22:47.981Z,1516666967.981 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:22:48.268Z,1516666968.268 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:22:48.678Z,1516666968.678 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:22:49.068Z,1516666969.068 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:22:49.180Z,1516666969.180 [CTD_Seabird](ERROR): Salinity reading out of range: 0.011063 psu 2018-01-23T00:22:49.181Z,1516666969.181 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:22:49.454Z,1516666969.454 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:22:49.784Z,1516666969.784 [CTD_Seabird](ERROR): Salinity reading out of range: 0.011063 psu 2018-01-23T00:22:49.785Z,1516666969.785 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:22:49.871Z,1516666969.871 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:22:50.261Z,1516666970.261 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:22:50.660Z,1516666970.660 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:22:50.988Z,1516666970.988 [CTD_Seabird](ERROR): Salinity reading out of range: 0.011064 psu 2018-01-23T00:22:50.989Z,1516666970.989 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:22:51.080Z,1516666971.080 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:22:51.467Z,1516666971.467 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:22:51.867Z,1516666971.867 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:22:52.188Z,1516666972.188 [CTD_Seabird](ERROR): Salinity reading out of range: 0.011064 psu 2018-01-23T00:22:52.189Z,1516666972.189 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:22:52.254Z,1516666972.254 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:22:52.654Z,1516666972.654 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:22:52.789Z,1516666972.789 [CTD_Seabird](ERROR): Salinity reading out of range: 0.011064 psu 2018-01-23T00:22:52.790Z,1516666972.790 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:22:53.056Z,1516666973.056 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:22:53.454Z,1516666973.454 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:22:53.854Z,1516666973.854 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:22:53.989Z,1516666973.989 [CTD_Seabird](ERROR): Salinity reading out of range: 0.011094 psu 2018-01-23T00:22:53.990Z,1516666973.990 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:22:54.267Z,1516666974.267 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:22:54.667Z,1516666974.667 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:22:55.075Z,1516666975.075 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:22:55.188Z,1516666975.188 [CTD_Seabird](ERROR): Salinity reading out of range: 0.011064 psu 2018-01-23T00:22:55.189Z,1516666975.189 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:22:55.459Z,1516666975.459 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:22:55.793Z,1516666975.793 [CTD_Seabird](ERROR): Salinity reading out of range: 0.011095 psu 2018-01-23T00:22:55.795Z,1516666975.795 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:22:55.863Z,1516666975.863 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:22:56.267Z,1516666976.267 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:22:56.660Z,1516666976.660 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:22:56.996Z,1516666976.996 [CTD_Seabird](ERROR): Salinity reading out of range: 0.011065 psu 2018-01-23T00:22:56.997Z,1516666976.997 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:22:57.078Z,1516666977.078 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:22:57.478Z,1516666977.478 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:22:57.876Z,1516666977.876 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:22:58.196Z,1516666978.196 [CTD_Seabird](ERROR): Salinity reading out of range: 0.011065 psu 2018-01-23T00:22:58.197Z,1516666978.197 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:22:58.266Z,1516666978.266 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:22:58.658Z,1516666978.658 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:22:58.798Z,1516666978.798 [CTD_Seabird](ERROR): Salinity reading out of range: 0.011065 psu 2018-01-23T00:22:58.799Z,1516666978.799 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:22:59.071Z,1516666979.071 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:22:59.470Z,1516666979.470 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:22:59.852Z,1516666979.852 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:23:00.002Z,1516666980.002 [CTD_Seabird](ERROR): Salinity reading out of range: 0.011066 psu 2018-01-23T00:23:00.004Z,1516666980.004 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:23:00.282Z,1516666980.282 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:23:00.678Z,1516666980.678 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:23:01.063Z,1516666981.063 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:23:01.205Z,1516666981.205 [CTD_Seabird](ERROR): Salinity reading out of range: 0.011066 psu 2018-01-23T00:23:01.207Z,1516666981.207 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:23:01.464Z,1516666981.464 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:23:01.802Z,1516666981.802 [CTD_Seabird](ERROR): Salinity reading out of range: 0.011066 psu 2018-01-23T00:23:01.804Z,1516666981.804 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:23:01.874Z,1516666981.874 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:23:02.283Z,1516666982.283 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:23:02.663Z,1516666982.663 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:23:03.004Z,1516666983.004 [CTD_Seabird](ERROR): Salinity reading out of range: 0.011066 psu 2018-01-23T00:23:03.005Z,1516666983.005 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:23:03.076Z,1516666983.076 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:23:03.483Z,1516666983.483 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:23:03.879Z,1516666983.879 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:23:04.205Z,1516666984.205 [CTD_Seabird](ERROR): Salinity reading out of range: 0.011066 psu 2018-01-23T00:23:04.206Z,1516666984.206 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:23:04.271Z,1516666984.271 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:23:04.664Z,1516666984.664 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:23:04.807Z,1516666984.807 [CTD_Seabird](ERROR): Salinity reading out of range: 0.011067 psu 2018-01-23T00:23:04.808Z,1516666984.808 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:23:05.061Z,1516666985.061 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:23:05.463Z,1516666985.463 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:23:05.863Z,1516666985.863 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:23:06.013Z,1516666986.013 [CTD_Seabird](ERROR): Salinity reading out of range: 0.011097 psu 2018-01-23T00:23:06.014Z,1516666986.014 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:23:06.284Z,1516666986.284 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:23:06.675Z,1516666986.675 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:23:06.810Z,1516666986.810 [CTD_Seabird](ERROR): Salinity reading out of range: 0.011067 psu 2018-01-23T00:23:06.812Z,1516666986.812 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:23:07.073Z,1516666987.073 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:23:07.483Z,1516666987.483 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:23:07.887Z,1516666987.887 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:23:08.012Z,1516666988.012 [CTD_Seabird](ERROR): Salinity reading out of range: 0.011068 psu 2018-01-23T00:23:08.013Z,1516666988.013 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:23:08.282Z,1516666988.282 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:23:08.674Z,1516666988.674 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:23:09.085Z,1516666989.085 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:23:09.212Z,1516666989.212 [CTD_Seabird](ERROR): Salinity reading out of range: 0.011068 psu 2018-01-23T00:23:09.213Z,1516666989.213 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:23:09.476Z,1516666989.476 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:23:09.815Z,1516666989.815 [CTD_Seabird](ERROR): Salinity reading out of range: 0.011068 psu 2018-01-23T00:23:09.816Z,1516666989.816 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:23:09.908Z,1516666989.908 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:23:10.269Z,1516666990.269 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:23:10.652Z,1516666990.652 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:23:11.016Z,1516666991.016 [CTD_Seabird](ERROR): Salinity reading out of range: 0.011068 psu 2018-01-23T00:23:11.017Z,1516666991.017 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:23:11.105Z,1516666991.105 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:23:11.461Z,1516666991.461 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:23:11.855Z,1516666991.855 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:23:12.216Z,1516666992.216 [CTD_Seabird](ERROR): Salinity reading out of range: 0.011068 psu 2018-01-23T00:23:12.217Z,1516666992.217 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:23:12.264Z,1516666992.264 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:23:12.687Z,1516666992.687 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:23:12.820Z,1516666992.820 [CTD_Seabird](ERROR): Salinity reading out of range: 0.011069 psu 2018-01-23T00:23:12.821Z,1516666992.821 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:23:13.074Z,1516666993.074 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:23:13.473Z,1516666993.473 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:23:13.854Z,1516666993.854 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:23:14.020Z,1516666994.020 [CTD_Seabird](ERROR): Salinity reading out of range: 0.011099 psu 2018-01-23T00:23:14.021Z,1516666994.021 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:23:14.263Z,1516666994.263 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:23:14.664Z,1516666994.664 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:23:15.082Z,1516666995.082 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:23:15.220Z,1516666995.220 [CTD_Seabird](ERROR): Salinity reading out of range: 0.011069 psu 2018-01-23T00:23:15.221Z,1516666995.221 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:23:15.478Z,1516666995.478 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:23:15.842Z,1516666995.842 [CTD_Seabird](ERROR): Salinity reading out of range: 0.011069 psu 2018-01-23T00:23:15.843Z,1516666995.843 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:23:15.906Z,1516666995.906 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:23:16.291Z,1516666996.291 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:23:16.671Z,1516666996.671 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:23:17.044Z,1516666997.044 [CTD_Seabird](ERROR): Salinity reading out of range: 0.011069 psu 2018-01-23T00:23:17.045Z,1516666997.045 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:23:17.071Z,1516666997.071 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:23:17.480Z,1516666997.480 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:23:17.871Z,1516666997.871 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:23:18.244Z,1516666998.244 [CTD_Seabird](ERROR): Salinity reading out of range: 0.011070 psu 2018-01-23T00:23:18.245Z,1516666998.245 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:23:18.278Z,1516666998.278 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:23:18.685Z,1516666998.685 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:23:18.829Z,1516666998.829 [CTD_Seabird](ERROR): Salinity reading out of range: 0.011070 psu 2018-01-23T00:23:18.830Z,1516666998.830 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:23:19.068Z,1516666999.068 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:23:19.459Z,1516666999.459 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:23:19.879Z,1516666999.879 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:23:20.029Z,1516667000.029 [CTD_Seabird](ERROR): Salinity reading out of range: 0.011070 psu 2018-01-23T00:23:20.030Z,1516667000.030 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:23:20.287Z,1516667000.287 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:23:20.659Z,1516667000.659 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:23:21.074Z,1516667001.074 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:23:21.228Z,1516667001.228 [CTD_Seabird](ERROR): Salinity reading out of range: 0.011071 psu 2018-01-23T00:23:21.229Z,1516667001.229 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:23:21.479Z,1516667001.479 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:23:21.480Z,1516667001.480 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:23:21.838Z,1516667001.838 [CTD_Seabird](ERROR): Salinity reading out of range: 0.011071 psu 2018-01-23T00:23:21.839Z,1516667001.839 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:23:21.889Z,1516667001.889 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:23:21.890Z,1516667001.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:23:22.267Z,1516667002.267 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:23:22.268Z,1516667002.268 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:23:22.677Z,1516667002.677 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:23:22.678Z,1516667002.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:23:23.040Z,1516667003.040 [CTD_Seabird](ERROR): Salinity reading out of range: 0.011101 psu 2018-01-23T00:23:23.041Z,1516667003.041 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:23:23.116Z,1516667003.116 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:23:23.117Z,1516667003.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:23:23.468Z,1516667003.468 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:23:23.469Z,1516667003.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:23:23.875Z,1516667003.875 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:23:23.876Z,1516667003.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:23:24.240Z,1516667004.240 [CTD_Seabird](ERROR): Salinity reading out of range: 0.011071 psu 2018-01-23T00:23:24.241Z,1516667004.241 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:23:24.291Z,1516667004.291 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:23:24.292Z,1516667004.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:23:24.691Z,1516667004.691 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:23:24.692Z,1516667004.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:23:24.846Z,1516667004.846 [CTD_Seabird](ERROR): Salinity reading out of range: 0.011072 psu 2018-01-23T00:23:24.848Z,1516667004.848 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:23:25.079Z,1516667005.079 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:23:25.465Z,1516667005.465 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:23:25.863Z,1516667005.863 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:23:26.048Z,1516667006.048 [CTD_Seabird](ERROR): Salinity reading out of range: 0.011072 psu 2018-01-23T00:23:26.049Z,1516667006.049 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:23:26.270Z,1516667006.270 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:23:26.675Z,1516667006.675 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:23:26.842Z,1516667006.842 [CTD_Seabird](ERROR): Salinity reading out of range: 0.011073 psu 2018-01-23T00:23:26.843Z,1516667006.843 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:23:28.044Z,1516667008.044 [CTD_Seabird](ERROR): Salinity reading out of range: 0.011073 psu 2018-01-23T00:23:28.045Z,1516667008.045 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:23:29.244Z,1516667009.244 [CTD_Seabird](ERROR): Salinity reading out of range: 0.011073 psu 2018-01-23T00:23:29.245Z,1516667009.245 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:23:29.846Z,1516667009.846 [CTD_Seabird](ERROR): Salinity reading out of range: 0.011103 psu 2018-01-23T00:23:29.847Z,1516667009.847 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:23:30.303Z,1516667010.303 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:23:30.427Z,1516667010.427 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:23:30.834Z,1516667010.834 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:23:31.048Z,1516667011.048 [CTD_Seabird](ERROR): Salinity reading out of range: 0.011073 psu 2018-01-23T00:23:31.049Z,1516667011.049 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:23:31.216Z,1516667011.216 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:23:31.617Z,1516667011.617 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:23:32.031Z,1516667012.031 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:23:32.248Z,1516667012.248 [CTD_Seabird](ERROR): Salinity reading out of range: 0.011104 psu 2018-01-23T00:23:32.249Z,1516667012.249 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:23:32.427Z,1516667012.427 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:23:32.827Z,1516667012.827 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:23:32.850Z,1516667012.850 [CTD_Seabird](ERROR): Salinity reading out of range: 0.011074 psu 2018-01-23T00:23:32.852Z,1516667012.852 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:23:33.214Z,1516667013.214 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:23:33.614Z,1516667013.614 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:23:34.027Z,1516667014.027 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:23:34.052Z,1516667014.052 [CTD_Seabird](ERROR): Salinity reading out of range: 0.011074 psu 2018-01-23T00:23:34.053Z,1516667014.053 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:23:34.427Z,1516667014.427 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:23:34.835Z,1516667014.835 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:23:35.214Z,1516667015.214 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:23:35.252Z,1516667015.252 [CTD_Seabird](ERROR): Salinity reading out of range: 0.011104 psu 2018-01-23T00:23:35.254Z,1516667015.254 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:23:35.616Z,1516667015.616 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:23:35.855Z,1516667015.855 [CTD_Seabird](ERROR): Salinity reading out of range: 0.011074 psu 2018-01-23T00:23:35.856Z,1516667015.856 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:23:36.027Z,1516667016.027 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:23:36.028Z,1516667016.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:23:36.424Z,1516667016.424 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:23:36.425Z,1516667016.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:23:36.830Z,1516667016.830 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:23:36.832Z,1516667016.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:23:37.056Z,1516667017.056 [CTD_Seabird](ERROR): Salinity reading out of range: 0.011105 psu 2018-01-23T00:23:37.057Z,1516667017.057 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:23:37.214Z,1516667017.214 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:23:37.215Z,1516667017.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:23:37.618Z,1516667017.618 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:23:37.619Z,1516667017.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:23:38.032Z,1516667018.032 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:23:38.033Z,1516667018.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:23:38.256Z,1516667018.256 [CTD_Seabird](ERROR): Salinity reading out of range: 0.011075 psu 2018-01-23T00:23:38.257Z,1516667018.257 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:23:38.432Z,1516667018.432 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:23:38.433Z,1516667018.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:23:38.833Z,1516667018.833 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:23:38.838Z,1516667018.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:23:38.860Z,1516667018.860 [CTD_Seabird](ERROR): Salinity reading out of range: 0.011105 psu 2018-01-23T00:23:38.862Z,1516667018.862 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:23:39.221Z,1516667019.221 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:23:39.222Z,1516667019.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:23:39.612Z,1516667019.612 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:23:39.613Z,1516667019.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:23:40.033Z,1516667020.033 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:23:40.034Z,1516667020.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:23:40.060Z,1516667020.060 [CTD_Seabird](ERROR): Salinity reading out of range: 0.011075 psu 2018-01-23T00:23:40.061Z,1516667020.061 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:23:40.432Z,1516667020.432 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:23:40.433Z,1516667020.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:23:40.470Z,1516667020.470 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = 0.000000, longitudeAccuracy_ = 0.000000, depthAccuracy_ = nan 2018-01-23T00:23:40.470Z,1516667020.470 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 3 2018-01-23T00:23:40.474Z,1516667020.474 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T00:23:40.572Z,1516667020.572 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T00:23:40.824Z,1516667020.824 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:23:40.825Z,1516667020.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:23:41.007Z,1516667021.007 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T00:23:41.007Z,1516667021.007 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 3 2018-01-23T00:23:41.213Z,1516667021.213 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:23:41.214Z,1516667021.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:23:41.249Z,1516667021.249 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T00:23:41.250Z,1516667021.250 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T00:23:41.250Z,1516667021.250 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T00:23:41.260Z,1516667021.260 [CTD_Seabird](ERROR): Salinity reading out of range: 0.011106 psu 2018-01-23T00:23:41.261Z,1516667021.261 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:23:41.624Z,1516667021.624 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:23:41.625Z,1516667021.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:23:41.864Z,1516667021.864 [CTD_Seabird](ERROR): Salinity reading out of range: 0.011106 psu 2018-01-23T00:23:41.865Z,1516667021.865 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:23:42.027Z,1516667022.027 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:23:42.028Z,1516667022.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:23:42.431Z,1516667022.431 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:23:42.432Z,1516667022.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:23:42.837Z,1516667022.837 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:23:42.856Z,1516667022.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:23:43.064Z,1516667023.064 [CTD_Seabird](ERROR): Salinity reading out of range: 0.011076 psu 2018-01-23T00:23:43.065Z,1516667023.065 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:23:43.224Z,1516667023.224 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:23:43.225Z,1516667023.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:23:43.629Z,1516667023.629 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:23:43.630Z,1516667023.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:23:44.037Z,1516667024.037 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:23:44.039Z,1516667024.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:23:44.264Z,1516667024.264 [CTD_Seabird](ERROR): Salinity reading out of range: 0.011106 psu 2018-01-23T00:23:44.265Z,1516667024.265 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:23:44.439Z,1516667024.439 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:23:44.831Z,1516667024.831 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:23:44.869Z,1516667024.869 [CTD_Seabird](ERROR): Salinity reading out of range: 0.011107 psu 2018-01-23T00:23:44.870Z,1516667024.870 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:23:45.226Z,1516667025.226 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:23:45.625Z,1516667025.625 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:23:46.036Z,1516667026.036 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:23:46.068Z,1516667026.068 [CTD_Seabird](ERROR): Salinity reading out of range: 0.011107 psu 2018-01-23T00:23:46.069Z,1516667026.069 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:23:46.432Z,1516667026.432 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:23:46.848Z,1516667026.848 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:23:47.220Z,1516667027.220 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:23:47.268Z,1516667027.268 [CTD_Seabird](ERROR): Salinity reading out of range: 0.011077 psu 2018-01-23T00:23:47.269Z,1516667027.269 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:23:47.622Z,1516667027.622 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:23:47.873Z,1516667027.873 [CTD_Seabird](ERROR): Salinity reading out of range: 0.011077 psu 2018-01-23T00:23:47.875Z,1516667027.875 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:23:48.035Z,1516667028.035 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:23:48.432Z,1516667028.432 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:23:48.834Z,1516667028.834 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:23:49.077Z,1516667029.077 [CTD_Seabird](ERROR): Salinity reading out of range: 0.011108 psu 2018-01-23T00:23:49.078Z,1516667029.078 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:23:49.213Z,1516667029.213 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:23:49.614Z,1516667029.614 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:23:50.023Z,1516667030.023 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:23:50.276Z,1516667030.276 [CTD_Seabird](ERROR): Salinity reading out of range: 0.011078 psu 2018-01-23T00:23:50.277Z,1516667030.277 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:23:50.435Z,1516667030.435 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:23:50.833Z,1516667030.833 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:23:50.879Z,1516667030.879 [CTD_Seabird](ERROR): Salinity reading out of range: 0.011108 psu 2018-01-23T00:23:50.880Z,1516667030.880 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:23:51.240Z,1516667031.240 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:23:51.620Z,1516667031.620 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:23:52.024Z,1516667032.024 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:23:52.089Z,1516667032.089 [CTD_Seabird](ERROR): Salinity reading out of range: 0.011109 psu 2018-01-23T00:23:52.090Z,1516667032.090 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:23:52.418Z,1516667032.418 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:23:52.474Z,1516667032.474 [DriftOrDonutAtChlPeak:AbortDrift:B.AbortDrift](IMPORTANT): Acoustic timeout 0.08 hours exceeded. Elapsed time since last timer reset: 0.08 hours. Aborting drift by executing stop command. 2018-01-23T00:23:52.475Z,1516667032.475 [DriftOrDonutAtChlPeak:AbortDrift:B.AbortDrift] Stopped 2018-01-23T00:23:52.475Z,1516667032.475 [DriftOrDonutAtChlPeak:AbortDrift:B.AbortDrift](INFO): Uninitializing AbortDrift. 2018-01-23T00:23:52.475Z,1516667032.475 [DriftOrDonutAtChlPeak:AbortDrift:C.Execute] Running Loop=1 2018-01-23T00:23:52.818Z,1516667032.818 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:23:52.881Z,1516667032.881 [CTD_Seabird](ERROR): Salinity reading out of range: 0.011079 psu 2018-01-23T00:23:52.882Z,1516667032.882 [CTD_Seabird](INFO): some bad data, not updating bins 2018-01-23T00:23:52.900Z,1516667032.900 [DriftOrDonutAtChlPeak:AbortDrift:C.Execute](INFO): Executing command stop 2018-01-23T00:23:52.909Z,1516667032.909 [DriftOrDonutAtChlPeak:AbortDrift:C.Execute] Stopped 2018-01-23T00:23:52.910Z,1516667032.910 [DriftOrDonutAtChlPeak:AbortDrift](INFO): Completed DriftOrDonutAtChlPeak:AbortDrift 2018-01-23T00:23:52.956Z,1516667032.956 [CommandLine](IMPORTANT): got command stop 2018-01-23T00:23:52.956Z,1516667032.956 [CommandLine](IMPORTANT): Scheduling is paused 2018-01-23T00:23:52.956Z,1516667032.956 [Supervisor](INFO): Stop Mission called by CommandLine::commandStop 2018-01-23T00:23:53.229Z,1516667033.229 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:23:53.280Z,1516667033.280 [DriftOrDonutAtChlPeak:AbortDrift] Running Loop=1 2018-01-23T00:23:53.280Z,1516667033.280 [DriftOrDonutAtChlPeak:AbortDrift](DEBUG): Aggregate::initialize DriftOrDonutAtChlPeak:AbortDrift 2018-01-23T00:23:53.281Z,1516667033.281 [DriftOrDonutAtChlPeak:AbortDrift:A] Running Loop=1 2018-01-23T00:23:53.281Z,1516667033.281 [DriftOrDonutAtChlPeak:AbortDrift:A](INFO): Insert acoustic timeout set to 0.083333 h . 2018-01-23T00:23:53.281Z,1516667033.281 [DriftOrDonutAtChlPeak:AbortDrift:A] Stopped 2018-01-23T00:23:53.282Z,1516667033.282 [DriftOrDonutAtChlPeak:AbortDrift:B.AbortDrift] Running Loop=1 2018-01-23T00:23:53.282Z,1516667033.282 [DriftOrDonutAtChlPeak:AbortDrift:B.AbortDrift](INFO): Initializing AbortDrift. 2018-01-23T00:23:53.282Z,1516667033.282 [DriftOrDonutAtChlPeak:AbortDrift:B.AbortDrift](IMPORTANT): Acoustic timeout set to: 0.08 hours. 2018-01-23T00:23:53.304Z,1516667033.304 [MissionManager](INFO): MissionManager is completed. 2018-01-23T00:23:53.304Z,1516667033.304 [MissionManager](INFO): Uninitializing Mission DriftOrDonutAtChlPeak 2018-01-23T00:23:53.304Z,1516667033.304 [DriftOrDonutAtChlPeak] Stopped 2018-01-23T00:23:53.304Z,1516667033.304 [DriftOrDonutAtChlPeak](DEBUG): Aggregate::uninitialize DriftOrDonutAtChlPeak 2018-01-23T00:23:53.304Z,1516667033.304 [DriftOrDonutAtChlPeak:StandardEnvelopes] Stopped 2018-01-23T00:23:53.304Z,1516667033.304 [DriftOrDonutAtChlPeak:StandardEnvelopes](DEBUG): Aggregate::uninitialize DriftOrDonutAtChlPeak:StandardEnvelopes 2018-01-23T00:23:53.304Z,1516667033.304 [DriftOrDonutAtChlPeak:StandardEnvelopes:A.AltitudeEnvelope] Stopped 2018-01-23T00:23:53.304Z,1516667033.304 [DriftOrDonutAtChlPeak:StandardEnvelopes:A.AltitudeEnvelope](DEBUG): Uninitialize AltitudeEnvelopeComponent. 2018-01-23T00:23:53.305Z,1516667033.305 [DriftOrDonutAtChlPeak:StandardEnvelopes:B.DepthEnvelope] Stopped 2018-01-23T00:23:53.305Z,1516667033.305 [DriftOrDonutAtChlPeak:StandardEnvelopes:B.DepthEnvelope](DEBUG): Uninitialize. 2018-01-23T00:23:53.305Z,1516667033.305 [DriftOrDonutAtChlPeak:StandardEnvelopes:C.OffshoreEnvelope] Stopped 2018-01-23T00:23:53.305Z,1516667033.305 [DriftOrDonutAtChlPeak:StandardEnvelopes:C.OffshoreEnvelope](DEBUG): Uninitialize OffshoreEnvelopeComponent. 2018-01-23T00:23:53.305Z,1516667033.305 [DriftOrDonutAtChlPeak:AbortDrift] Stopped 2018-01-23T00:23:53.305Z,1516667033.305 [DriftOrDonutAtChlPeak:AbortDrift](DEBUG): Aggregate::uninitialize DriftOrDonutAtChlPeak:AbortDrift 2018-01-23T00:23:53.305Z,1516667033.305 [DriftOrDonutAtChlPeak:AbortDrift:B.AbortDrift] Stopped 2018-01-23T00:23:53.305Z,1516667033.305 [DriftOrDonutAtChlPeak:AbortDrift:B.AbortDrift](INFO): Uninitializing AbortDrift. 2018-01-23T00:23:53.305Z,1516667033.305 [DriftOrDonutAtChlPeak:H.Pitch] Stopped 2018-01-23T00:23:53.305Z,1516667033.305 [DriftOrDonutAtChlPeak:Science] Stopped 2018-01-23T00:23:53.305Z,1516667033.305 [DriftOrDonutAtChlPeak:Science](DEBUG): Aggregate::uninitialize DriftOrDonutAtChlPeak:Science 2018-01-23T00:23:53.305Z,1516667033.305 [DriftOrDonutAtChlPeak:Science:A] Stopped 2018-01-23T00:23:53.305Z,1516667033.305 [DriftOrDonutAtChlPeak:Science:C] Stopped 2018-01-23T00:23:53.305Z,1516667033.305 [DriftOrDonutAtChlPeak:Science:D] Stopped 2018-01-23T00:23:53.305Z,1516667033.305 [DriftOrDonutAtChlPeak:Science:G] Stopped 2018-01-23T00:23:53.306Z,1516667033.306 [DriftOrDonutAtChlPeak:Science:H] Stopped 2018-01-23T00:23:53.306Z,1516667033.306 [DriftOrDonutAtChlPeak:Science:PeakDetectChl] Stopped 2018-01-23T00:23:53.306Z,1516667033.306 [DriftOrDonutAtChlPeak:Science:PeakDetectChl](DEBUG): Aggregate::uninitialize DriftOrDonutAtChlPeak:Science:PeakDetectChl 2018-01-23T00:23:53.306Z,1516667033.306 [DriftOrDonutAtChlPeak:Science:PeakDetectChl:A.PeakDetectVsDepth] Stopped 2018-01-23T00:23:53.306Z,1516667033.306 [DriftOrDonutAtChlPeak:Science:PeakDetectChl:A.PeakDetectVsDepth](DEBUG): Uninitialize. 2018-01-23T00:23:53.306Z,1516667033.306 [DriftOrDonutAtChlPeak:Science:HighestChlPeakReport] Stopped 2018-01-23T00:23:53.306Z,1516667033.306 [DriftOrDonutAtChlPeak:Science:HighestChlPeakReport](DEBUG): Aggregate::uninitialize DriftOrDonutAtChlPeak:Science:HighestChlPeakReport 2018-01-23T00:23:53.306Z,1516667033.306 [DriftOrDonutAtChlPeak:Science:HighestChlPeakReport:A.PeakDetectHorizontal] Stopped 2018-01-23T00:23:53.306Z,1516667033.306 [DriftOrDonutAtChlPeak:Science:HighestChlPeakReport:A.PeakDetectHorizontal](DEBUG): Uninitialize. 2018-01-23T00:23:53.306Z,1516667033.306 [DriftOrDonutAtChlPeak:J.AltitudeEnvelope] Stopped 2018-01-23T00:23:53.315Z,1516667033.315 [DriftOrDonutAtChlPeak:J.AltitudeEnvelope](DEBUG): Uninitialize AltitudeEnvelopeComponent. 2018-01-23T00:23:53.315Z,1516667033.315 [DriftOrDonutAtChlPeak:FindHighChlLocation] Stopped 2018-01-23T00:23:53.315Z,1516667033.315 [DriftOrDonutAtChlPeak:FindHighChlLocation](DEBUG): Aggregate::uninitialize DriftOrDonutAtChlPeak:FindHighChlLocation 2018-01-23T00:23:53.315Z,1516667033.315 [DriftOrDonutAtChlPeak:FindHighChlLocation:NeedComms] Stopped 2018-01-23T00:23:53.315Z,1516667033.315 [DriftOrDonutAtChlPeak:FindHighChlLocation:NeedComms](DEBUG): Aggregate::uninitialize DriftOrDonutAtChlPeak:FindHighChlLocation:NeedComms 2018-01-23T00:23:53.315Z,1516667033.315 [DriftOrDonutAtChlPeak:FindHighChlLocation:NeedComms:B.GoToSurface] Stopped 2018-01-23T00:23:53.315Z,1516667033.315 [DriftOrDonutAtChlPeak:FindHighChlLocation:NeedComms:B.GoToSurface](DEBUG): Uninitialize GoToSurfaceComponent. 2018-01-23T00:23:53.315Z,1516667033.315 [DriftOrDonutAtChlPeak:FindHighChlLocation:NeedComms:E] Stopped 2018-01-23T00:23:53.315Z,1516667033.315 [DriftOrDonutAtChlPeak:FindHighChlLocation:C.SetSpeed] Stopped 2018-01-23T00:23:53.315Z,1516667033.315 [DriftOrDonutAtChlPeak:FindHighChlLocation:C.SetSpeed](DEBUG): Uninitialize. 2018-01-23T00:23:53.315Z,1516667033.315 [DriftOrDonutAtChlPeak:FindHighChlLocation:F.DepthEnvelope] Stopped 2018-01-23T00:23:53.315Z,1516667033.315 [DriftOrDonutAtChlPeak:FindHighChlLocation:F.DepthEnvelope](DEBUG): Uninitialize. 2018-01-23T00:23:53.316Z,1516667033.316 [DriftOrDonutAtChlPeak:FindHighChlLocation:G.YoYo] Stopped 2018-01-23T00:23:53.316Z,1516667033.316 [DriftOrDonutAtChlPeak:FindHighChlLocation:G.YoYo](DEBUG): Uninitialize YoYoComponent. 2018-01-23T00:23:53.316Z,1516667033.316 [DriftOrDonutAtChlPeak:FindHighChlLocation:H.Buoyancy] Stopped 2018-01-23T00:23:53.316Z,1516667033.316 [DriftOrDonutAtChlPeak:FindHighChlLocation:H.Buoyancy](DEBUG): Uninitialize Buoyancy Component. 2018-01-23T00:23:53.316Z,1516667033.316 [DriftOrDonutAtChlPeak:FindHighChlLocation:GoToSurfaceBeforeDiving] Stopped 2018-01-23T00:23:53.316Z,1516667033.316 [DriftOrDonutAtChlPeak:FindHighChlLocation:GoToSurfaceBeforeDiving](DEBUG): Aggregate::uninitialize DriftOrDonutAtChlPeak:FindHighChlLocation:GoToSurfaceBeforeDiving 2018-01-23T00:23:53.316Z,1516667033.316 [DriftOrDonutAtChlPeak:TakeSamples] Stopped 2018-01-23T00:23:53.316Z,1516667033.316 [DriftOrDonutAtChlPeak:TakeSamples](DEBUG): Aggregate::uninitialize DriftOrDonutAtChlPeak:TakeSamples 2018-01-23T00:23:53.511Z,1516667033.511 [WetLabsBB2FL](INFO): Powering down 2018-01-23T00:23:53.708Z,1516667033.708 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:23:53.745Z,1516667033.745 [MissionManager](IMPORTANT): Started mission Default 2018-01-23T00:23:53.745Z,1516667033.745 [Default] Running Loop=1 2018-01-23T00:23:53.745Z,1516667033.745 [Default](DEBUG): Aggregate::initialize Default 2018-01-23T00:23:53.745Z,1516667033.745 [Default:B.GoToSurface] Running Loop=1 2018-01-23T00:23:53.745Z,1516667033.745 [Default:B.GoToSurface](DEBUG): Initialize GoToSurfaceComponent. 2018-01-23T00:23:53.745Z,1516667033.745 [Default:B.GoToSurface](DEBUG): No depth rate setting specified. Using default value of nan m/s. 2018-01-23T00:23:53.746Z,1516667033.746 [Default:B.GoToSurface](DEBUG): No pitch setting specified. Using default value of nan degrees. 2018-01-23T00:23:53.746Z,1516667033.746 [Default:B.GoToSurface](DEBUG): No speed setting specified. Using default value of 1.000000 m/s. 2018-01-23T00:23:53.746Z,1516667033.746 [Default:B.GoToSurface](DEBUG): No pitch timeout specified. Using default value of 20.000000 seconds. 2018-01-23T00:23:53.751Z,1516667033.751 [Default:B.GoToSurface](DEBUG): No surface timeout specified. Using default value of 1000.000000 seconds. 2018-01-23T00:23:53.751Z,1516667033.751 [Default:A.Wait] Running Loop=1 2018-01-23T00:23:53.751Z,1516667033.751 [Default:A.Wait](DEBUG): Initialize Wait Component. 2018-01-23T00:23:54.066Z,1516667034.066 [Aanderaa_O2](INFO): Powering down 2018-01-23T00:23:54.131Z,1516667034.131 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:23:54.451Z,1516667034.451 [CTD_Seabird](INFO): Stopping potential previous instance(s) of CTD_Seabird LCM interface 2018-01-23T00:23:54.451Z,1516667034.451 [CTD_Seabird](INFO): Powering down 2018-01-23T00:23:54.516Z,1516667034.516 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:23:54.897Z,1516667034.897 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:23:55.303Z,1516667035.303 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:23:55.700Z,1516667035.700 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:23:56.100Z,1516667036.100 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:23:56.500Z,1516667036.500 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:23:56.901Z,1516667036.901 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:23:57.299Z,1516667037.299 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:23:57.692Z,1516667037.692 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:23:58.096Z,1516667038.096 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:23:58.493Z,1516667038.493 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:23:58.895Z,1516667038.895 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:23:59.285Z,1516667039.285 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:23:59.691Z,1516667039.691 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:24:00.092Z,1516667040.092 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:24:00.496Z,1516667040.496 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:24:00.897Z,1516667040.897 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:24:01.298Z,1516667041.298 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:24:01.697Z,1516667041.697 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:24:02.099Z,1516667042.099 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:24:02.499Z,1516667042.499 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:24:02.889Z,1516667042.889 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:24:03.292Z,1516667043.292 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:24:03.692Z,1516667043.692 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:24:04.096Z,1516667044.096 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:24:04.492Z,1516667044.492 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:24:04.892Z,1516667044.892 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:24:05.293Z,1516667045.293 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:24:05.700Z,1516667045.700 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:24:06.096Z,1516667046.096 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:24:06.501Z,1516667046.501 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:24:06.899Z,1516667046.899 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:24:06.919Z,1516667046.919 [Default:A.Wait](INFO): Done Waiting. 2018-01-23T00:24:06.919Z,1516667046.919 [Default:A.Wait] Stopped 2018-01-23T00:24:06.920Z,1516667046.920 [Default:A.Wait](DEBUG): Uninitialize Wait Component. 2018-01-23T00:24:07.294Z,1516667047.294 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:24:07.337Z,1516667047.337 [Default:CheckIn] Running Loop=1 2018-01-23T00:24:07.337Z,1516667047.337 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-01-23T00:24:07.337Z,1516667047.337 [Default:CheckIn:Read_GPS] Running Loop=1 2018-01-23T00:24:07.700Z,1516667047.700 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:24:08.092Z,1516667048.092 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:24:08.492Z,1516667048.492 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:24:08.914Z,1516667048.914 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:24:09.321Z,1516667049.321 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:24:09.715Z,1516667049.715 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:24:10.094Z,1516667050.094 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:24:10.506Z,1516667050.506 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:24:10.898Z,1516667050.898 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:24:11.304Z,1516667051.304 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:24:11.706Z,1516667051.706 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:24:12.111Z,1516667052.111 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:24:12.495Z,1516667052.495 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:24:12.895Z,1516667052.895 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:24:13.305Z,1516667053.305 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:24:13.692Z,1516667053.692 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:24:14.114Z,1516667054.114 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:24:14.516Z,1516667054.516 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:24:14.907Z,1516667054.907 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:24:15.293Z,1516667055.293 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:24:15.696Z,1516667055.696 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:24:16.103Z,1516667056.103 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:24:16.521Z,1516667056.521 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:24:16.915Z,1516667056.915 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:24:17.305Z,1516667057.305 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:24:17.704Z,1516667057.704 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:24:18.111Z,1516667058.111 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:24:18.515Z,1516667058.515 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:24:18.915Z,1516667058.915 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:24:19.305Z,1516667059.305 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:24:19.701Z,1516667059.701 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:24:20.103Z,1516667060.103 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:24:20.507Z,1516667060.507 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:24:20.907Z,1516667060.907 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:24:21.302Z,1516667061.302 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:24:21.692Z,1516667061.692 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:24:22.115Z,1516667062.115 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:24:22.519Z,1516667062.519 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:24:22.915Z,1516667062.915 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:24:23.297Z,1516667063.297 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:24:23.693Z,1516667063.693 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:24:24.117Z,1516667064.117 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:24:24.512Z,1516667064.512 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:24:24.912Z,1516667064.912 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:24:25.305Z,1516667065.305 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:24:25.700Z,1516667065.700 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:24:26.107Z,1516667066.107 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:24:26.516Z,1516667066.516 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:24:26.924Z,1516667066.924 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:24:30.205Z,1516667070.205 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:24:30.334Z,1516667070.334 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:24:30.723Z,1516667070.723 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:24:31.111Z,1516667071.111 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:24:31.506Z,1516667071.506 [CommandLine](IMPORTANT): got command restart system 2018-01-23T00:24:31.514Z,1516667071.514 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:24:31.895Z,1516667071.895 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:24:32.301Z,1516667072.301 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:24:32.702Z,1516667072.702 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:24:33.111Z,1516667073.111 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:24:33.512Z,1516667073.512 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:24:33.915Z,1516667073.915 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:24:34.293Z,1516667074.293 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:24:34.692Z,1516667074.692 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:24:35.112Z,1516667075.112 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:24:35.511Z,1516667075.511 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:24:35.555Z,1516667075.555 [CommandLine ThreadHandler](INFO): Uninitializing protected caller thread. 2018-01-23T00:24:35.555Z,1516667075.555 [CommandLine ThreadHandler](INFO): Thread cancelled. 2018-01-23T00:24:35.702Z,1516667075.702 [Supervisor](DEBUG): Uninitializing supervisor and starting cleanup. Bye! 2018-01-23T00:24:35.703Z,1516667075.703 [CommandLine ThreadHandler](INFO): Thread cancelled. 2018-01-23T00:24:35.703Z,1516667075.703 [CommandLine](INFO): Join timeout helper Thread ID is 2424 2018-01-23T00:24:35.707Z,1516667075.707 [ComponentRegistry](INFO): Shutting down NavChartDb ThreadHandler 2018-01-23T00:24:35.710Z,1516667075.710 [NavChartDb ThreadHandler](INFO): Thread cancelled. 2018-01-23T00:24:35.711Z,1516667075.711 [NavChartDb](INFO): Join timeout helper Thread ID is 2425 2018-01-23T00:24:35.763Z,1516667075.763 [NavChartDb ThreadHandler](INFO): Uninitializing protected caller thread. 2018-01-23T00:24:35.763Z,1516667075.763 [NavChartDb ThreadHandler](INFO): Thread cancelled. 2018-01-23T00:24:35.775Z,1516667075.774 [ComponentRegistry](INFO): Shutting down Radio_Surface ThreadHandler 2018-01-23T00:24:35.775Z,1516667075.775 [Radio_Surface ThreadHandler](INFO): Thread cancelled. 2018-01-23T00:24:35.775Z,1516667075.775 [Radio_Surface](INFO): Join timeout helper Thread ID is 2426 2018-01-23T00:24:35.811Z,1516667075.811 [Radio_Surface ThreadHandler](INFO): Uninitializing protected caller thread. 2018-01-23T00:24:35.811Z,1516667075.811 [Radio_Surface ThreadHandler](INFO): Thread cancelled. 2018-01-23T00:24:35.815Z,1516667075.815 [ComponentRegistry](INFO): Shutting down WetLabsBB2FL ThreadHandler 2018-01-23T00:24:35.815Z,1516667075.815 [WetLabsBB2FL ThreadHandler](INFO): Thread cancelled. 2018-01-23T00:24:35.815Z,1516667075.815 [WetLabsBB2FL](INFO): Join timeout helper Thread ID is 2427 2018-01-23T00:24:35.902Z,1516667075.902 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T00:24:35.971Z,1516667075.971 [WetLabsBB2FL ThreadHandler](INFO): Uninitializing protected caller thread. 2018-01-23T00:24:35.971Z,1516667075.971 [WetLabsBB2FL](INFO): Powering down 2018-01-23T00:24:35.972Z,1516667075.972 [WetLabsBB2FL ThreadHandler](INFO): Thread cancelled. 2018-01-23T00:24:35.979Z,1516667075.979 [ComponentRegistry](INFO): Shutting down CTD_Seabird ThreadHandler 2018-01-23T00:24:35.979Z,1516667075.979 [CTD_Seabird ThreadHandler](INFO): Thread cancelled. 2018-01-23T00:24:35.979Z,1516667075.979 [CTD_Seabird](INFO): Join timeout helper Thread ID is 2428 2018-01-23T00:24:36.083Z,1516667076.083 [CTD_Seabird ThreadHandler](INFO): Uninitializing protected caller thread. 2018-01-23T00:24:36.169Z,1516667076.169 [CTD_Seabird](INFO): Stopping potential previous instance(s) of CTD_Seabird LCM interface 2018-01-23T00:24:36.169Z,1516667076.169 [CTD_Seabird](INFO): Powering down 2018-01-23T00:24:36.170Z,1516667076.170 [CTD_Seabird ThreadHandler](INFO): Thread cancelled. 2018-01-23T00:24:36.176Z,1516667076.176 [ComponentRegistry](INFO): Shutting down logger ThreadHandler 2018-01-23T00:24:36.176Z,1516667076.176 [logger ThreadHandler](INFO): Thread cancelled. 2018-01-23T00:24:36.176Z,1516667076.176 [logger](INFO): Join timeout helper Thread ID is 2430 2018-01-23T00:24:36.203Z,1516667076.203 [logger ThreadHandler](INFO): Uninitializing protected caller thread. 2018-01-23T00:24:36.203Z,1516667076.203 [logger ThreadHandler](INFO): Thread cancelled. 2018-01-23T00:24:36.216Z,1516667076.216 [ComponentRegistry](INFO): Shutting down CommandLine ThreadHandler 2018-01-23T00:24:36.216Z,1516667076.216 [CommandLine ThreadHandler](INFO): Thread cancelled. 2018-01-23T00:24:36.216Z,1516667076.216 [ComponentRegistry](INFO): Shutting down controlThread ThreadHandler 2018-01-23T00:24:36.216Z,1516667076.216 [controlThread ThreadHandler](INFO): Thread cancelled. 2018-01-23T00:24:36.217Z,1516667076.217 [controlThread](INFO): Join timeout helper Thread ID is 2431 2018-01-23T00:24:36.263Z,1516667076.263 [controlThread ThreadHandler](INFO): Uninitializing protected caller thread. 2018-01-23T00:24:36.263Z,1516667076.263 [controlThread](DEBUG): Uninitializing ControlThread 2018-01-23T00:24:36.264Z,1516667076.264 [Aanderaa_O2](INFO): Powering down 2018-01-23T00:24:36.265Z,1516667076.265 [NAL9602](INFO): Powering down 2018-01-23T00:24:36.267Z,1516667076.267 [DAT](INFO): Powering down 2018-01-23T00:24:36.387Z,1516667076.387 [PNI_TCM](INFO): Powering down 2018-01-23T00:24:36.476Z,1516667076.476 [DepthRateCalculator](DEBUG): Initializing DepthRateCalculator. 2018-01-23T00:24:36.477Z,1516667076.477 [NavChart](DEBUG): Uninitialize NavChart Navigation. 2018-01-23T00:24:36.478Z,1516667076.478 [MissionManager](INFO): Uninitializing Mission Default 2018-01-23T00:24:36.478Z,1516667076.478 [Default] Stopped 2018-01-23T00:24:36.478Z,1516667076.478 [Default](DEBUG): Aggregate::uninitialize Default 2018-01-23T00:24:36.478Z,1516667076.478 [Default:B.GoToSurface] Stopped 2018-01-23T00:24:36.478Z,1516667076.478 [Default:B.GoToSurface](DEBUG): Uninitialize GoToSurfaceComponent. 2018-01-23T00:24:36.479Z,1516667076.479 [Default:CheckIn] Stopped 2018-01-23T00:24:36.479Z,1516667076.479 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-01-23T00:24:36.479Z,1516667076.479 [Default:CheckIn:Read_GPS] Stopped 2018-01-23T00:24:36.482Z,1516667076.482 [VerticalControl](DEBUG): Uninitialize VerticalControlComponent. 2018-01-23T00:24:36.483Z,1516667076.483 [HorizontalControl](DEBUG): Uninitialize HorizontalControlComponent. 2018-01-23T00:24:36.483Z,1516667076.483 [SpeedControl](DEBUG): Uninitialize SpeedControlComponent. 2018-01-23T00:24:36.484Z,1516667076.484 [LoopControl](DEBUG): Uninitialize LoopControlComponent. 2018-01-23T00:24:36.484Z,1516667076.484 [BuoyancyServo](DEBUG): Uninitialize Buoyancy Servo. 2018-01-23T00:24:36.484Z,1516667076.484 [BuoyancyServo](INFO): Powering down 2018-01-23T00:24:36.499Z,1516667076.499 [ElevatorServo](DEBUG): Uninitialize Elevator Servo. 2018-01-23T00:24:36.499Z,1516667076.499 [ElevatorServo](INFO): Powering down 2018-01-23T00:24:36.500Z,1516667076.500 [MassServo](DEBUG): Uninitialize Mass Servo. 2018-01-23T00:24:36.500Z,1516667076.500 [MassServo](INFO): Powering down 2018-01-23T00:24:36.501Z,1516667076.501 [RudderServo](DEBUG): Uninitialize Rudder Servo. 2018-01-23T00:24:36.501Z,1516667076.501 [RudderServo](INFO): Powering down 2018-01-23T00:24:36.501Z,1516667076.501 [ThrusterServo](DEBUG): Uninitialize Thruster Servo. 2018-01-23T00:24:36.502Z,1516667076.502 [ThrusterServo](INFO): Powering down 2018-01-23T00:24:36.503Z,1516667076.503 [SBIT](DEBUG): Uninitialize SBIT Component. 2018-01-23T00:24:36.503Z,1516667076.503 [IBIT](DEBUG): Uninitialize IBIT Component. 2018-01-23T00:24:36.503Z,1516667076.503 [CBIT](DEBUG): Uninitialize CBIT Component. 2018-01-23T00:24:36.504Z,1516667076.504 [controlThread ThreadHandler](INFO): Thread cancelled. 2018-01-23T00:24:36.583Z,1516667076.583 [WetLabsBB2FL ThreadHandler](INFO): Thread cancelled. 2018-01-23T00:24:36.588Z,1516667076.588 [CTD_Seabird ThreadHandler](INFO): Thread cancelled. 2018-01-23T00:24:36.603Z,1516667076.603 [Radio_Surface ThreadHandler](INFO): Thread cancelled. 2018-01-23T00:24:36.644Z,1516667076.644 [NavChartDb ThreadHandler](INFO): Thread cancelled. 2018-01-23T00:24:36.706Z,1516667076.706 [logger ThreadHandler](INFO): Thread cancelled.